diff options
| author | Matthew Whitehead <tedheadster@gmail.com> | 2019-03-14 16:46:00 -0400 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-04-27 09:33:57 +0200 |
| commit | 1a883611e2f282af13bf0baa2bb35a9301d01b55 (patch) | |
| tree | 31758825e59dc8b1a2abb181488809d35be857e7 | |
| parent | c2dc2fdc0cd17d308671fb2dcdfcb2d2b89cfcf9 (diff) | |
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
[ Upstream commit 18fb053f9b827bd98cfc64f2a35df8ab19745a1d ]
There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:
outb(CX86_CCR2, 0x22);
inb(0x23);
From the comments:
* When using the old macros a line like
* setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
* do {
* outb((CX86_CCR2), 0x22);
* outb((({
* outb((CX86_CCR2), 0x22);
* inb(0x23);
* }) | 0x88), 0x23);
* } while (0);
The new macros fix this problem, so use them instead. Tested on an
actual Geode processor.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
| -rw-r--r-- | arch/x86/kernel/cpu/cyrix.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 15e47c1cd412..6e4e4191abb5 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -121,7 +121,7 @@ static void set_cx86_reorder(void) setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ /* Load/Store Serialize to mem access disable (=reorder it) */ - setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80); + setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80); /* set load/store serialize from 1GB to 4GB */ ccr3 |= 0xe0; setCx86(CX86_CCR3, ccr3); @@ -132,11 +132,11 @@ static void set_cx86_memwb(void) printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n"); /* CCR2 bit 2: unlock NW bit */ - setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04); + setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04); /* set 'Not Write-through' */ write_cr0(read_cr0() | X86_CR0_NW); /* CCR2 bit 2: lock NW bit and set WT1 */ - setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14); + setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14); } /* @@ -150,14 +150,14 @@ static void geode_configure(void) local_irq_save(flags); /* Suspend on halt power saving and enable #SUSP pin */ - setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88); + setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ /* FPU fast, DTE cache, Mem bypass */ - setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38); + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38); setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ set_cx86_memwb(); @@ -292,7 +292,7 @@ static void init_cyrix(struct cpuinfo_x86 *c) /* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level == 2) { /* Enable cxMMX extensions (GX1 Datasheet 54) */ - setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1); + setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1); /* * GXm : 0x30 ... 0x5f GXm datasheet 51 @@ -315,7 +315,7 @@ static void init_cyrix(struct cpuinfo_x86 *c) if (dir1 > 7) { dir0_msn++; /* M II */ /* Enable MMX extensions (App note 108) */ - setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1); + setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1); } else { /* A 6x86MX - it has the bug. */ set_cpu_bug(c, X86_BUG_COMA); |