Merge branch 'bcm7xxx_apd_eee'

Florian Fainelli says:

====================
net: phy: bcm7xxx: APD and EEE support

This patch series enables Auto-power down and EEE for the BCM7xxx integrated
Gigabit PHYs.

I also put a fix for the fixed PHY that would allow clause 45 over clause 22
reads/writes but would return bogus data by using e.g: ethtool --show-eee
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 229 insertions, 127 deletions

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index fdce1ea28790..e98c510b75c5 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/brcmphy.h>
+#include <linux/mdio.h>
 
 /* Broadcom BCM7xxx internal PHY registers */
 #define MII_BCM7XXX_CHANNEL_WIDTH	0x2000
@@ -146,6 +147,53 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int bcm7xxx_apd_enable(struct phy_device *phydev)
+{
+	int val;
+
+	/* Enable powering down of the DLL during auto-power down */
+	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+	if (val < 0)
+		return val;
+
+	val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+	bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+
+	/* Enable auto-power down */
+	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+	if (val < 0)
+		return val;
+
+	val |= BCM54XX_SHD_APD_EN;
+	return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
+}
+
+static int bcm7xxx_eee_enable(struct phy_device *phydev)
+{
+	int val;
+
+	val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+				    MDIO_MMD_AN, phydev->addr);
+	if (val < 0)
+		return val;
+
+	/* Enable general EEE feature at the PHY level */
+	val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+
+	phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+			       MDIO_MMD_AN, phydev->addr, val);
+
+	/* Advertise supported modes */
+	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+				    MDIO_MMD_AN, phydev->addr);
+
+	val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+	phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+			       MDIO_MMD_AN, phydev->addr, val);
+
+	return 0;
+}
+
 static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -154,7 +202,15 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	return bcm7xxx_28nm_afe_config_init(phydev);
+	ret = bcm7xxx_28nm_afe_config_init(phydev);
+	if (ret)
+		return ret;
+
+	ret = bcm7xxx_eee_enable(phydev);
+	if (ret)
+		return ret;
+
+	return bcm7xxx_apd_enable(phydev);
 }
 
 static int bcm7xxx_28nm_resume(struct phy_device *phydev)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 34088d60da74..854f2c9a7b2b 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -25,132 +25,10 @@
 #define BRCM_PHY_REV(phydev) \
 	((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
 
-/*
- * Broadcom LED source encodings.  These are used in BCM5461, BCM5481,
- * BCM5482, and possibly some others.
- */
-#define BCM_LED_SRC_LINKSPD1	0x0
-#define BCM_LED_SRC_LINKSPD2	0x1
-#define BCM_LED_SRC_XMITLED	0x2
-#define BCM_LED_SRC_ACTIVITYLED	0x3
-#define BCM_LED_SRC_FDXLED	0x4
-#define BCM_LED_SRC_SLAVE	0x5
-#define BCM_LED_SRC_INTR	0x6
-#define BCM_LED_SRC_QUALITY	0x7
-#define BCM_LED_SRC_RCVLED	0x8
-#define BCM_LED_SRC_MULTICOLOR1	0xa
-#define BCM_LED_SRC_OPENSHORT	0xb
-#define BCM_LED_SRC_OFF		0xe	/* Tied high */
-#define BCM_LED_SRC_ON		0xf	/* Tied low */
-
-
-/*
- * BCM5482: Shadow registers
- * Shadow values go into bits [14:10] of register 0x1c to select a shadow
- * register to access.
- */
-/* 00101: Spare Control Register 3 */
-#define BCM54XX_SHD_SCR3		0x05
-#define  BCM54XX_SHD_SCR3_DEF_CLK125	0x0001
-#define  BCM54XX_SHD_SCR3_DLLAPD_DIS	0x0002
-#define  BCM54XX_SHD_SCR3_TRDDAPD	0x0004
-
-/* 01010: Auto Power-Down */
-#define BCM54XX_SHD_APD			0x0a
-#define  BCM54XX_SHD_APD_EN		0x0020
-
-#define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
-					/* LED3 / ~LINKSPD[2] selector */
-#define BCM5482_SHD_LEDS1_LED3(src)	((src & 0xf) << 4)
-					/* LED1 / ~LINKSPD[1] selector */
-#define BCM5482_SHD_LEDS1_LED1(src)	((src & 0xf) << 0)
-#define BCM54XX_SHD_RGMII_MODE	0x0b	/* 01011: RGMII Mode Selector */
-#define BCM5482_SHD_SSD		0x14	/* 10100: Secondary SerDes control */
-#define BCM5482_SHD_SSD_LEDM	0x0008	/* SSD LED Mode enable */
-#define BCM5482_SHD_SSD_EN	0x0001	/* SSD enable */
-#define BCM5482_SHD_MODE	0x1f	/* 11111: Mode Control Register */
-#define BCM5482_SHD_MODE_1000BX	0x0001	/* Enable 1000BASE-X registers */
-
-
-/*
- * EXPANSION SHADOW ACCESS REGISTERS.  (PHY REG 0x15, 0x16, and 0x17)
- */
-#define MII_BCM54XX_EXP_AADJ1CH0		0x001f
-#define  MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN	0x0200
-#define  MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF	0x0100
-#define MII_BCM54XX_EXP_AADJ1CH3		0x601f
-#define  MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ	0x0002
-#define MII_BCM54XX_EXP_EXP08			0x0F08
-#define  MII_BCM54XX_EXP_EXP08_RJCT_2MHZ	0x0001
-#define  MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE	0x0200
-#define MII_BCM54XX_EXP_EXP75			0x0f75
-#define  MII_BCM54XX_EXP_EXP75_VDACCTRL		0x003c
-#define  MII_BCM54XX_EXP_EXP75_CM_OSC		0x0001
-#define MII_BCM54XX_EXP_EXP96			0x0f96
-#define  MII_BCM54XX_EXP_EXP96_MYST		0x0010
-#define MII_BCM54XX_EXP_EXP97			0x0f97
-#define  MII_BCM54XX_EXP_EXP97_MYST		0x0c0c
-
-/*
- * BCM5482: Secondary SerDes registers
- */
-#define BCM5482_SSD_1000BX_CTL		0x00	/* 1000BASE-X Control */
-#define BCM5482_SSD_1000BX_CTL_PWRDOWN	0x0800	/* Power-down SSD */
-#define BCM5482_SSD_SGMII_SLAVE		0x15	/* SGMII Slave Register */
-#define BCM5482_SSD_SGMII_SLAVE_EN	0x0002	/* Slave mode enable */
-#define BCM5482_SSD_SGMII_SLAVE_AD	0x0001	/* Slave auto-detection */
-
-
-/*****************************************************************************/
-/* Fast Ethernet Transceiver definitions. */
-/*****************************************************************************/
-
-#define MII_BRCM_FET_INTREG		0x1a	/* Interrupt register */
-#define MII_BRCM_FET_IR_MASK		0x0100	/* Mask all interrupts */
-#define MII_BRCM_FET_IR_LINK_EN		0x0200	/* Link status change enable */
-#define MII_BRCM_FET_IR_SPEED_EN	0x0400	/* Link speed change enable */
-#define MII_BRCM_FET_IR_DUPLEX_EN	0x0800	/* Duplex mode change enable */
-#define MII_BRCM_FET_IR_ENABLE		0x4000	/* Interrupt enable */
-
-#define MII_BRCM_FET_BRCMTEST		0x1f	/* Brcm test register */
-#define MII_BRCM_FET_BT_SRE		0x0080	/* Shadow register enable */
-
-
-/*** Shadow register definitions ***/
-
-#define MII_BRCM_FET_SHDW_MISCCTRL	0x10	/* Shadow misc ctrl */
-#define MII_BRCM_FET_SHDW_MC_FAME	0x4000	/* Force Auto MDIX enable */
-
-#define MII_BRCM_FET_SHDW_AUXMODE4	0x1a	/* Auxiliary mode 4 */
-#define MII_BRCM_FET_SHDW_AM4_LED_MASK	0x0003
-#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001
-
-#define MII_BRCM_FET_SHDW_AUXSTAT2	0x1b	/* Auxiliary status 2 */
-#define MII_BRCM_FET_SHDW_AS2_APDE	0x0020	/* Auto power down enable */
-
-
 MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
 
-/*
- * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T
- * 0x1c shadow registers.
- */
-static int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow)
-{
-	phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
-	return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
-}
-
-static int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow, u16 val)
-{
-	return phy_write(phydev, MII_BCM54XX_SHD,
-			 MII_BCM54XX_SHD_WRITE |
-			 MII_BCM54XX_SHD_VAL(shadow) |
-			 MII_BCM54XX_SHD_DATA(val));
-}
-
 /* Indirect register access functions for the Expansion Registers */
 static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum)
 {
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index d60d875cb445..5b19fbbda6d4 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -124,6 +124,17 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
 	if (reg_num >= MII_REGS_NUM)
 		return -1;
 
+	/* We do not support emulating Clause 45 over Clause 22 register reads
+	 * return an error instead of bogus data.
+	 */
+	switch (reg_num) {
+	case MII_MMD_CTRL:
+	case MII_MMD_DATA:
+		return -1;
+	default:
+		break;
+	}
+
 	list_for_each_entry(fp, &fmb->phys, node) {
 		if (fp->addr == phy_addr) {
 			/* Issue callback if user registered it. */
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c94e2a27446a..932190e04d08 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -955,7 +955,7 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
  * 3) Read  reg 14 // Read MMD data
  */
-static int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
 				 int devad, int addr)
 {
 	struct phy_driver *phydrv = phydev->drv;
@@ -971,6 +971,7 @@ static int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
 	}
 	return value;
 }
+EXPORT_SYMBOL(phy_read_mmd_indirect);
 
 /**
  * phy_write_mmd_indirect - writes data to the MMD registers
@@ -988,7 +989,7 @@ static int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
  * 3) Write reg 14 // Write MMD data
  */
-static void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
+void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
 				   int devad, int addr, u32 data)
 {
 	struct phy_driver *phydrv = phydev->drv;
@@ -1002,6 +1003,7 @@ static void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
 		phydrv->write_mmd_indirect(phydev, prtad, devad, addr, data);
 	}
 }
+EXPORT_SYMBOL(phy_write_mmd_indirect);
 
 /**
  * phy_init_eee - init and check the EEE feature
@@ -1017,12 +1019,14 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 {
 	/* According to 802.3az,the EEE is supported only in full duplex-mode.
 	 * Also EEE feature is active when core is operating with MII, GMII
-	 * or RGMII.
+	 * or RGMII. Internal PHYs are also allowed to proceed and should
+	 * return an error if they do not support EEE.
 	 */
 	if ((phydev->duplex == DUPLEX_FULL) &&
 	    ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
 	    (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
-	    (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
+	    (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+	     phy_is_internal(phydev))) {
 		int eee_lp, eee_cap, eee_adv;
 		u32 lp, cap, adv;
 		int status;
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 61219b9b3445..ee1431d976fa 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -92,4 +92,130 @@
 
 #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
 
+/*
+ * Broadcom LED source encodings.  These are used in BCM5461, BCM5481,
+ * BCM5482, and possibly some others.
+ */
+#define BCM_LED_SRC_LINKSPD1	0x0
+#define BCM_LED_SRC_LINKSPD2	0x1
+#define BCM_LED_SRC_XMITLED	0x2
+#define BCM_LED_SRC_ACTIVITYLED	0x3
+#define BCM_LED_SRC_FDXLED	0x4
+#define BCM_LED_SRC_SLAVE	0x5
+#define BCM_LED_SRC_INTR	0x6
+#define BCM_LED_SRC_QUALITY	0x7
+#define BCM_LED_SRC_RCVLED	0x8
+#define BCM_LED_SRC_MULTICOLOR1	0xa
+#define BCM_LED_SRC_OPENSHORT	0xb
+#define BCM_LED_SRC_OFF		0xe	/* Tied high */
+#define BCM_LED_SRC_ON		0xf	/* Tied low */
+
+
+/*
+ * BCM5482: Shadow registers
+ * Shadow values go into bits [14:10] of register 0x1c to select a shadow
+ * register to access.
+ */
+/* 00101: Spare Control Register 3 */
+#define BCM54XX_SHD_SCR3		0x05
+#define  BCM54XX_SHD_SCR3_DEF_CLK125	0x0001
+#define  BCM54XX_SHD_SCR3_DLLAPD_DIS	0x0002
+#define  BCM54XX_SHD_SCR3_TRDDAPD	0x0004
+
+/* 01010: Auto Power-Down */
+#define BCM54XX_SHD_APD			0x0a
+#define  BCM54XX_SHD_APD_EN		0x0020
+
+#define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
+					/* LED3 / ~LINKSPD[2] selector */
+#define BCM5482_SHD_LEDS1_LED3(src)	((src & 0xf) << 4)
+					/* LED1 / ~LINKSPD[1] selector */
+#define BCM5482_SHD_LEDS1_LED1(src)	((src & 0xf) << 0)
+#define BCM54XX_SHD_RGMII_MODE	0x0b	/* 01011: RGMII Mode Selector */
+#define BCM5482_SHD_SSD		0x14	/* 10100: Secondary SerDes control */
+#define BCM5482_SHD_SSD_LEDM	0x0008	/* SSD LED Mode enable */
+#define BCM5482_SHD_SSD_EN	0x0001	/* SSD enable */
+#define BCM5482_SHD_MODE	0x1f	/* 11111: Mode Control Register */
+#define BCM5482_SHD_MODE_1000BX	0x0001	/* Enable 1000BASE-X registers */
+
+
+/*
+ * EXPANSION SHADOW ACCESS REGISTERS.  (PHY REG 0x15, 0x16, and 0x17)
+ */
+#define MII_BCM54XX_EXP_AADJ1CH0		0x001f
+#define  MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN	0x0200
+#define  MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF	0x0100
+#define MII_BCM54XX_EXP_AADJ1CH3		0x601f
+#define  MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ	0x0002
+#define MII_BCM54XX_EXP_EXP08			0x0F08
+#define  MII_BCM54XX_EXP_EXP08_RJCT_2MHZ	0x0001
+#define  MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE	0x0200
+#define MII_BCM54XX_EXP_EXP75			0x0f75
+#define  MII_BCM54XX_EXP_EXP75_VDACCTRL		0x003c
+#define  MII_BCM54XX_EXP_EXP75_CM_OSC		0x0001
+#define MII_BCM54XX_EXP_EXP96			0x0f96
+#define  MII_BCM54XX_EXP_EXP96_MYST		0x0010
+#define MII_BCM54XX_EXP_EXP97			0x0f97
+#define  MII_BCM54XX_EXP_EXP97_MYST		0x0c0c
+
+/*
+ * BCM5482: Secondary SerDes registers
+ */
+#define BCM5482_SSD_1000BX_CTL		0x00	/* 1000BASE-X Control */
+#define BCM5482_SSD_1000BX_CTL_PWRDOWN	0x0800	/* Power-down SSD */
+#define BCM5482_SSD_SGMII_SLAVE		0x15	/* SGMII Slave Register */
+#define BCM5482_SSD_SGMII_SLAVE_EN	0x0002	/* Slave mode enable */
+#define BCM5482_SSD_SGMII_SLAVE_AD	0x0001	/* Slave auto-detection */
+
+
+/*****************************************************************************/
+/* Fast Ethernet Transceiver definitions. */
+/*****************************************************************************/
+
+#define MII_BRCM_FET_INTREG		0x1a	/* Interrupt register */
+#define MII_BRCM_FET_IR_MASK		0x0100	/* Mask all interrupts */
+#define MII_BRCM_FET_IR_LINK_EN		0x0200	/* Link status change enable */
+#define MII_BRCM_FET_IR_SPEED_EN	0x0400	/* Link speed change enable */
+#define MII_BRCM_FET_IR_DUPLEX_EN	0x0800	/* Duplex mode change enable */
+#define MII_BRCM_FET_IR_ENABLE		0x4000	/* Interrupt enable */
+
+#define MII_BRCM_FET_BRCMTEST		0x1f	/* Brcm test register */
+#define MII_BRCM_FET_BT_SRE		0x0080	/* Shadow register enable */
+
+
+/*** Shadow register definitions ***/
+
+#define MII_BRCM_FET_SHDW_MISCCTRL	0x10	/* Shadow misc ctrl */
+#define MII_BRCM_FET_SHDW_MC_FAME	0x4000	/* Force Auto MDIX enable */
+
+#define MII_BRCM_FET_SHDW_AUXMODE4	0x1a	/* Auxiliary mode 4 */
+#define MII_BRCM_FET_SHDW_AM4_LED_MASK	0x0003
+#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001
+
+#define MII_BRCM_FET_SHDW_AUXSTAT2	0x1b	/* Auxiliary status 2 */
+#define MII_BRCM_FET_SHDW_AS2_APDE	0x0020	/* Auto power down enable */
+
+/*
+ * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T
+ * 0x1c shadow registers.
+ */
+static inline int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow)
+{
+	phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
+	return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
+}
+
+static inline int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow,
+				       u16 val)
+{
+	return phy_write(phydev, MII_BCM54XX_SHD,
+			 MII_BCM54XX_SHD_WRITE |
+			 MII_BCM54XX_SHD_VAL(shadow) |
+			 MII_BCM54XX_SHD_DATA(val));
+}
+
+#define BRCM_CL45VEN_EEE_CONTROL	0x803d
+#define LPI_FEATURE_EN			0x8000
+#define LPI_FEATURE_EN_DIG1000X		0x4000
+
 #endif /* _LINUX_BRCMPHY_H */
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ed39956b5613..d090cfcaa167 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -598,6 +598,19 @@ static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
 }
 
 /**
+ * phy_read_mmd_indirect - reads data from the MMD registers
+ * @phydev: The PHY device bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ *
+ * Description: it reads data from the MMD registers (clause 22 to access to
+ * clause 45) of the specified phy address.
+ */
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
+			  int devad, int addr);
+
+/**
  * phy_read - Convenience function for reading a given PHY register
  * @phydev: the phy_device struct
  * @regnum: register number to read
@@ -668,6 +681,20 @@ static inline int phy_write_mmd(struct phy_device *phydev, int devad,
 	return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
 }
 
+/**
+ * phy_write_mmd_indirect - writes data to the MMD registers
+ * @phydev: The PHY device
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ * @data: data to write in the MMD register
+ *
+ * Description: Write data from the MMD registers of the specified
+ * phy address.
+ */
+void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
+			    int devad, int addr, u32 data);
+
 struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 				     bool is_c45,
 				     struct phy_c45_device_ids *c45_ids);