Merge branch 'stmmac-IPQ806x'

Mathieu Olivari says:

====================
Add support for QCA IPQ806x Ethernet GMAC controller

This patch set adds support for the integrated Ethernet GMAC controller
on QCA IPQ806x SoC. This controller is based on a Gigabit Synopsys
DesignWare IP, already supported in the stmmac driver located in
drivers/net/ethernet/stmicro/stmmac.

This change is done as a follow-up to the following thread:
*http://www.spinics.net/lists/netdev/msg311265.html
While previous attempt was creating a new driver to drive this controller,
this new post leverages the existing stmmac driver by implementing the
SoC specific glue to it.

Aside from the pure stmmac glue layer, we have a couple of related
patches:
*IPQ806x NSS clock addition is cherry-picked and refreshed from the
 following thread: https://lkml.org/lkml/2014/8/6/390
*phy-handle and fixed-link support are also added in this change set so the
 driver can be fully functional on platforms using device-trees as well as
 ethernet switches.

V2:
 *Fix MODULE_LICENSE to "Dual BSD/GPL" as the dwmac-ipq806x.c is using
  ISC license.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

10 files changed, 1089 insertions, 14 deletions

diff --git a/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt b/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt
new file mode 100644
index 000000000000..6d7ab4e524d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt
@@ -0,0 +1,35 @@
+* IPQ806x DWMAC Ethernet controller
+
+The device inherits all the properties of the dwmac/stmmac devices
+described in the file net/stmmac.txt with the following changes.
+
+Required properties:
+
+- compatible: should be "qcom,ipq806x-gmac" along with "snps,dwmac"
+	      and any applicable more detailed version number
+	      described in net/stmmac.txt
+
+- qcom,nss-common: should contain a phandle to a syscon device mapping the
+		   nss-common registers.
+
+- qcom,qsgmii-csr: should contain a phandle to a syscon device mapping the
+		   qsgmii-csr registers.
+
+Example:
+
+	gmac: ethernet@37000000 {
+		device_type = "network";
+		compatible = "qcom,ipq806x-gmac";
+		reg = <0x37000000 0x200000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+
+		qcom,nss-common = <&nss_common>;
+		qcom,qsgmii-csr = <&qsgmii_csr>;
+
+		clocks = <&gcc GMAC_CORE1_CLK>;
+		clock-names = "stmmaceth";
+
+		resets = <&gcc GMAC_CORE1_RESET>;
+		reset-names = "stmmaceth";
+	};
diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index a50936a17376..563969942a1d 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -140,12 +140,47 @@ static struct clk_regmap pll14_vote = {
 	},
 };
 
+#define NSS_PLL_RATE(f, _l, _m, _n, i) \
+	{  \
+		.freq = f,  \
+		.l = _l, \
+		.m = _m, \
+		.n = _n, \
+		.ibits = i, \
+	}
+
+static struct pll_freq_tbl pll18_freq_tbl[] = {
+	NSS_PLL_RATE(550000000, 44, 0, 1, 0x01495625),
+	NSS_PLL_RATE(733000000, 58, 16, 25, 0x014b5625),
+};
+
+static struct clk_pll pll18 = {
+	.l_reg = 0x31a4,
+	.m_reg = 0x31a8,
+	.n_reg = 0x31ac,
+	.config_reg = 0x31b4,
+	.mode_reg = 0x31a0,
+	.status_reg = 0x31b8,
+	.status_bit = 16,
+	.post_div_shift = 16,
+	.post_div_width = 1,
+	.freq_tbl = pll18_freq_tbl,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "pll18",
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.ops = &clk_pll_ops,
+	},
+};
+
 enum {
 	P_PXO,
 	P_PLL8,
 	P_PLL3,
 	P_PLL0,
 	P_CXO,
+	P_PLL14,
+	P_PLL18,
 };
 
 static const struct parent_map gcc_pxo_pll8_map[] = {
@@ -197,6 +232,22 @@ static const char *gcc_pxo_pll8_pll0_map[] = {
 	"pll0_vote",
 };
 
+static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
+	{ P_PXO, 0 },
+	{ P_PLL8, 4 },
+	{ P_PLL0, 2 },
+	{ P_PLL14, 5 },
+	{ P_PLL18, 1 }
+};
+
+static const char *gcc_pxo_pll8_pll14_pll18_pll0[] = {
+	"pxo",
+	"pll8_vote",
+	"pll0_vote",
+	"pll14",
+	"pll18",
+};
+
 static struct freq_tbl clk_tbl_gsbi_uart[] = {
 	{  1843200, P_PLL8, 2,  6, 625 },
 	{  3686400, P_PLL8, 2, 12, 625 },
@@ -2202,6 +2253,472 @@ static struct clk_branch ebi2_aon_clk = {
 	},
 };
 
+static const struct freq_tbl clk_tbl_gmac[] = {
+	{ 133000000, P_PLL0, 1,  50, 301 },
+	{ 266000000, P_PLL0, 1, 127, 382 },
+	{ }
+};
+
+static struct clk_dyn_rcg gmac_core1_src = {
+	.ns_reg[0] = 0x3cac,
+	.ns_reg[1] = 0x3cb0,
+	.md_reg[0] = 0x3ca4,
+	.md_reg[1] = 0x3ca8,
+	.bank_reg = 0x3ca0,
+	.mn[0] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.mn[1] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_gmac,
+	.clkr = {
+		.enable_reg = 0x3ca0,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "gmac_core1_src",
+			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.num_parents = 5,
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch gmac_core1_clk = {
+	.halt_reg = 0x3c20,
+	.halt_bit = 4,
+	.hwcg_reg = 0x3cb4,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x3cb4,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gmac_core1_clk",
+			.parent_names = (const char *[]){
+				"gmac_core1_src",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_dyn_rcg gmac_core2_src = {
+	.ns_reg[0] = 0x3ccc,
+	.ns_reg[1] = 0x3cd0,
+	.md_reg[0] = 0x3cc4,
+	.md_reg[1] = 0x3cc8,
+	.bank_reg = 0x3ca0,
+	.mn[0] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.mn[1] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_gmac,
+	.clkr = {
+		.enable_reg = 0x3cc0,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "gmac_core2_src",
+			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.num_parents = 5,
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch gmac_core2_clk = {
+	.halt_reg = 0x3c20,
+	.halt_bit = 5,
+	.hwcg_reg = 0x3cd4,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x3cd4,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gmac_core2_clk",
+			.parent_names = (const char *[]){
+				"gmac_core2_src",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_dyn_rcg gmac_core3_src = {
+	.ns_reg[0] = 0x3cec,
+	.ns_reg[1] = 0x3cf0,
+	.md_reg[0] = 0x3ce4,
+	.md_reg[1] = 0x3ce8,
+	.bank_reg = 0x3ce0,
+	.mn[0] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.mn[1] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_gmac,
+	.clkr = {
+		.enable_reg = 0x3ce0,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "gmac_core3_src",
+			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.num_parents = 5,
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch gmac_core3_clk = {
+	.halt_reg = 0x3c20,
+	.halt_bit = 6,
+	.hwcg_reg = 0x3cf4,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x3cf4,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gmac_core3_clk",
+			.parent_names = (const char *[]){
+				"gmac_core3_src",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_dyn_rcg gmac_core4_src = {
+	.ns_reg[0] = 0x3d0c,
+	.ns_reg[1] = 0x3d10,
+	.md_reg[0] = 0x3d04,
+	.md_reg[1] = 0x3d08,
+	.bank_reg = 0x3d00,
+	.mn[0] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.mn[1] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_gmac,
+	.clkr = {
+		.enable_reg = 0x3d00,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "gmac_core4_src",
+			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.num_parents = 5,
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch gmac_core4_clk = {
+	.halt_reg = 0x3c20,
+	.halt_bit = 7,
+	.hwcg_reg = 0x3d14,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x3d14,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gmac_core4_clk",
+			.parent_names = (const char *[]){
+				"gmac_core4_src",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static const struct freq_tbl clk_tbl_nss_tcm[] = {
+	{ 266000000, P_PLL0, 3, 0, 0 },
+	{ 400000000, P_PLL0, 2, 0, 0 },
+	{ }
+};
+
+static struct clk_dyn_rcg nss_tcm_src = {
+	.ns_reg[0] = 0x3dc4,
+	.ns_reg[1] = 0x3dc8,
+	.bank_reg = 0x3dc0,
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_nss_tcm,
+	.clkr = {
+		.enable_reg = 0x3dc0,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "nss_tcm_src",
+			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.num_parents = 5,
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch nss_tcm_clk = {
+	.halt_reg = 0x3c20,
+	.halt_bit = 14,
+	.clkr = {
+		.enable_reg = 0x3dd0,
+		.enable_mask = BIT(6) | BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "nss_tcm_clk",
+			.parent_names = (const char *[]){
+				"nss_tcm_src",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static const struct freq_tbl clk_tbl_nss[] = {
+	{ 110000000, P_PLL18, 1, 1, 5 },
+	{ 275000000, P_PLL18, 2, 0, 0 },
+	{ 550000000, P_PLL18, 1, 0, 0 },
+	{ 733000000, P_PLL18, 1, 0, 0 },
+	{ }
+};
+
+static struct clk_dyn_rcg ubi32_core1_src_clk = {
+	.ns_reg[0] = 0x3d2c,
+	.ns_reg[1] = 0x3d30,
+	.md_reg[0] = 0x3d24,
+	.md_reg[1] = 0x3d28,
+	.bank_reg = 0x3d20,
+	.mn[0] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.mn[1] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_nss,
+	.clkr = {
+		.enable_reg = 0x3d20,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "ubi32_core1_src_clk",
+			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.num_parents = 5,
+			.ops = &clk_dyn_rcg_ops,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+		},
+	},
+};
+
+static struct clk_dyn_rcg ubi32_core2_src_clk = {
+	.ns_reg[0] = 0x3d4c,
+	.ns_reg[1] = 0x3d50,
+	.md_reg[0] = 0x3d44,
+	.md_reg[1] = 0x3d48,
+	.bank_reg = 0x3d40,
+	.mn[0] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.mn[1] = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_nss,
+	.clkr = {
+		.enable_reg = 0x3d40,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "ubi32_core2_src_clk",
+			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.num_parents = 5,
+			.ops = &clk_dyn_rcg_ops,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+		},
+	},
+};
+
 static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[PLL0] = &pll0.clkr,
 	[PLL0_VOTE] = &pll0_vote,
@@ -2211,6 +2728,7 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[PLL8_VOTE] = &pll8_vote,
 	[PLL14] = &pll14.clkr,
 	[PLL14_VOTE] = &pll14_vote,
+	[PLL18] = &pll18.clkr,
 	[GSBI1_UART_SRC] = &gsbi1_uart_src.clkr,
 	[GSBI1_UART_CLK] = &gsbi1_uart_clk.clkr,
 	[GSBI2_UART_SRC] = &gsbi2_uart_src.clkr,
@@ -2307,6 +2825,18 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[USB_FS1_SYSTEM_CLK] = &usb_fs1_sys_clk.clkr,
 	[EBI2_CLK] = &ebi2_clk.clkr,
 	[EBI2_AON_CLK] = &ebi2_aon_clk.clkr,
+	[GMAC_CORE1_CLK_SRC] = &gmac_core1_src.clkr,
+	[GMAC_CORE1_CLK] = &gmac_core1_clk.clkr,
+	[GMAC_CORE2_CLK_SRC] = &gmac_core2_src.clkr,
+	[GMAC_CORE2_CLK] = &gmac_core2_clk.clkr,
+	[GMAC_CORE3_CLK_SRC] = &gmac_core3_src.clkr,
+	[GMAC_CORE3_CLK] = &gmac_core3_clk.clkr,
+	[GMAC_CORE4_CLK_SRC] = &gmac_core4_src.clkr,
+	[GMAC_CORE4_CLK] = &gmac_core4_clk.clkr,
+	[UBI32_CORE1_CLK_SRC] = &ubi32_core1_src_clk.clkr,
+	[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
+	[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
+	[NSSTCM_CLK] = &nss_tcm_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_ipq806x_resets[] = {
@@ -2425,6 +2955,48 @@ static const struct qcom_reset_map gcc_ipq806x_resets[] = {
 	[USB30_1_PHY_RESET] = { 0x3b58, 0 },
 	[NSSFB0_RESET] = { 0x3b60, 6 },
 	[NSSFB1_RESET] = { 0x3b60, 7 },
+	[UBI32_CORE1_CLKRST_CLAMP_RESET] = { 0x3d3c, 3},
+	[UBI32_CORE1_CLAMP_RESET] = { 0x3d3c, 2 },
+	[UBI32_CORE1_AHB_RESET] = { 0x3d3c, 1 },
+	[UBI32_CORE1_AXI_RESET] = { 0x3d3c, 0 },
+	[UBI32_CORE2_CLKRST_CLAMP_RESET] = { 0x3d5c, 3 },
+	[UBI32_CORE2_CLAMP_RESET] = { 0x3d5c, 2 },
+	[UBI32_CORE2_AHB_RESET] = { 0x3d5c, 1 },
+	[UBI32_CORE2_AXI_RESET] = { 0x3d5c, 0 },
+	[GMAC_CORE1_RESET] = { 0x3cbc, 0 },
+	[GMAC_CORE2_RESET] = { 0x3cdc, 0 },
+	[GMAC_CORE3_RESET] = { 0x3cfc, 0 },
+	[GMAC_CORE4_RESET] = { 0x3d1c, 0 },
+	[GMAC_AHB_RESET] = { 0x3e24, 0 },
+	[NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 },
+	[NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 },
+	[NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 },
+	[NSS_CH0_HW_RST_RX_125M_N_RESET] = { 0x3b60, 3 },
+	[NSS_CH0_RST_TX_125M_N_RESET] = { 0x3b60, 4 },
+	[NSS_CH1_RST_RX_CLK_N_RESET] = { 0x3b60, 5 },
+	[NSS_CH1_RST_TX_CLK_N_RESET] = { 0x3b60, 6 },
+	[NSS_CH1_RST_RX_125M_N_RESET] = { 0x3b60, 7 },
+	[NSS_CH1_HW_RST_RX_125M_N_RESET] = { 0x3b60, 8 },
+	[NSS_CH1_RST_TX_125M_N_RESET] = { 0x3b60, 9 },
+	[NSS_CH2_RST_RX_CLK_N_RESET] = { 0x3b60, 10 },
+	[NSS_CH2_RST_TX_CLK_N_RESET] = { 0x3b60, 11 },
+	[NSS_CH2_RST_RX_125M_N_RESET] = { 0x3b60, 12 },
+	[NSS_CH2_HW_RST_RX_125M_N_RESET] = { 0x3b60, 13 },
+	[NSS_CH2_RST_TX_125M_N_RESET] = { 0x3b60, 14 },
+	[NSS_CH3_RST_RX_CLK_N_RESET] = { 0x3b60, 15 },
+	[NSS_CH3_RST_TX_CLK_N_RESET] = { 0x3b60, 16 },
+	[NSS_CH3_RST_RX_125M_N_RESET] = { 0x3b60, 17 },
+	[NSS_CH3_HW_RST_RX_125M_N_RESET] = { 0x3b60, 18 },
+	[NSS_CH3_RST_TX_125M_N_RESET] = { 0x3b60, 19 },
+	[NSS_RST_RX_250M_125M_N_RESET] = { 0x3b60, 20 },
+	[NSS_RST_TX_250M_125M_N_RESET] = { 0x3b60, 21 },
+	[NSS_QSGMII_TXPI_RST_N_RESET] = { 0x3b60, 22 },
+	[NSS_QSGMII_CDR_RST_N_RESET] = { 0x3b60, 23 },
+	[NSS_SGMII2_CDR_RST_N_RESET] = { 0x3b60, 24 },
+	[NSS_SGMII3_CDR_RST_N_RESET] = { 0x3b60, 25 },
+	[NSS_CAL_PRBS_RST_N_RESET] = { 0x3b60, 26 },
+	[NSS_LCKDT_RST_N_RESET] = { 0x3b60, 27 },
+	[NSS_SRDS_N_RESET] = { 0x3b60, 28 },
 };
 
 static const struct regmap_config gcc_ipq806x_regmap_config = {
@@ -2453,6 +3025,8 @@ static int gcc_ipq806x_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	int ret;
 
 	/* Temporary until RPM clocks supported */
 	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
@@ -2463,7 +3037,25 @@ static int gcc_ipq806x_probe(struct platform_device *pdev)
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	return qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+	ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+	if (ret)
+		return ret;
+
+	regmap = dev_get_regmap(dev, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	/* Setup PLL18 static bits */
+	regmap_update_bits(regmap, 0x31a4, 0xffffffc0, 0x40000400);
+	regmap_write(regmap, 0x31b0, 0x3080);
+
+	/* Set GMAC footswitch sleep/wakeup values */
+	regmap_write(regmap, 0x3cb8, 8);
+	regmap_write(regmap, 0x3cd8, 8);
+	regmap_write(regmap, 0x3cf8, 8);
+	regmap_write(regmap, 0x3d18, 8);
+
+	return 0;
 }
 
 static int gcc_ipq806x_remove(struct platform_device *pdev)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 731e0453a7d4..cec147d1d34f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -16,6 +16,7 @@ if STMMAC_ETH
 config STMMAC_PLATFORM
 	tristate "STMMAC Platform bus support"
 	depends on STMMAC_ETH
+	select MFD_SYSCON
 	default y
 	---help---
 	  This selects the platform specific bus support for the stmmac driver.
@@ -36,6 +37,19 @@ config DWMAC_GENERIC
 	  platform specific code to function or is using platform
 	  data for setup.
 
+config DWMAC_IPQ806X
+	tristate "QCA IPQ806x DWMAC support"
+	default ARCH_QCOM
+	depends on OF
+	select MFD_SYSCON
+	help
+	  Support for QCA IPQ806X DWMAC Ethernet.
+
+	  This selects the IPQ806x SoC glue layer support for the stmmac
+	  device driver. This driver does not use any of the hardware
+	  acceleration features available on this SoC. Network devices
+	  will behave like standard non-accelerated ethernet interfaces.
+
 config DWMAC_LPC18XX
 	tristate "NXP LPC18xx/43xx DWMAC support"
 	default ARCH_LPC18XX
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 92e714a48367..b3901616f4f6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -6,6 +6,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o	\
 
 # Ordering matters. Generic driver must be last.
 obj-$(CONFIG_STMMAC_PLATFORM)	+= stmmac-platform.o
+obj-$(CONFIG_DWMAC_IPQ806X)	+= dwmac-ipq806x.o
 obj-$(CONFIG_DWMAC_LPC18XX)	+= dwmac-lpc18xx.o
 obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o
 obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
new file mode 100644
index 000000000000..7e3129e7f143
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -0,0 +1,365 @@
+/*
+ * Qualcomm Atheros IPQ806x GMAC glue layer
+ *
+ * Copyright (C) 2015 The Linux Foundation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/stmmac.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+
+#include "stmmac_platform.h"
+
+#define NSS_COMMON_CLK_GATE			0x8
+#define NSS_COMMON_CLK_GATE_PTP_EN(x)		BIT(0x10 + x)
+#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x)	BIT(0x9 + (x * 2))
+#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x)	BIT(0x8 + (x * 2))
+#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x)	BIT(0x4 + x)
+#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x)	BIT(0x0 + x)
+
+#define NSS_COMMON_CLK_DIV0			0xC
+#define NSS_COMMON_CLK_DIV_OFFSET(x)		(x * 8)
+#define NSS_COMMON_CLK_DIV_MASK			0x7f
+
+#define NSS_COMMON_CLK_SRC_CTRL			0x14
+#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x)	(1 << x)
+/* Mode is coded on 1 bit but is different depending on the MAC ID:
+ * MAC0: QSGMII=0 RGMII=1
+ * MAC1: QSGMII=0 SGMII=0 RGMII=1
+ * MAC2 & MAC3: QSGMII=0 SGMII=1
+ */
+#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x)	1
+#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x)	((x >= 2) ? 1 : 0)
+
+#define NSS_COMMON_MACSEC_CTL			0x28
+#define NSS_COMMON_MACSEC_CTL_EXT_BYPASS_EN(x)	(1 << x)
+
+#define NSS_COMMON_GMAC_CTL(x)			(0x30 + (x * 4))
+#define NSS_COMMON_GMAC_CTL_CSYS_REQ		BIT(19)
+#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL	BIT(16)
+#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET	8
+#define NSS_COMMON_GMAC_CTL_IFG_OFFSET		0
+#define NSS_COMMON_GMAC_CTL_IFG_MASK		0x3f
+
+#define NSS_COMMON_CLK_DIV_RGMII_1000		1
+#define NSS_COMMON_CLK_DIV_RGMII_100		9
+#define NSS_COMMON_CLK_DIV_RGMII_10		99
+#define NSS_COMMON_CLK_DIV_SGMII_1000		0
+#define NSS_COMMON_CLK_DIV_SGMII_100		4
+#define NSS_COMMON_CLK_DIV_SGMII_10		49
+
+#define QSGMII_PCS_MODE_CTL			0x68
+#define QSGMII_PCS_MODE_CTL_AUTONEG_EN(x)	BIT((x * 8) + 7)
+
+#define QSGMII_PCS_CAL_LCKDT_CTL		0x120
+#define QSGMII_PCS_CAL_LCKDT_CTL_RST		BIT(19)
+
+/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */
+#define QSGMII_PHY_SGMII_CTL(x)			((x == 1) ? 0x134 : \
+						 (0x13c + (4 * (x - 2))))
+#define QSGMII_PHY_CDR_EN			BIT(0)
+#define QSGMII_PHY_RX_FRONT_EN			BIT(1)
+#define QSGMII_PHY_RX_SIGNAL_DETECT_EN		BIT(2)
+#define QSGMII_PHY_TX_DRIVER_EN			BIT(3)
+#define QSGMII_PHY_QSGMII_EN			BIT(7)
+#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET	12
+#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK		0x7
+#define QSGMII_PHY_RX_DC_BIAS_OFFSET		18
+#define QSGMII_PHY_RX_DC_BIAS_MASK		0x3
+#define QSGMII_PHY_RX_INPUT_EQU_OFFSET		20
+#define QSGMII_PHY_RX_INPUT_EQU_MASK		0x3
+#define QSGMII_PHY_CDR_PI_SLEW_OFFSET		22
+#define QSGMII_PHY_CDR_PI_SLEW_MASK		0x3
+#define QSGMII_PHY_TX_DRV_AMP_OFFSET		28
+#define QSGMII_PHY_TX_DRV_AMP_MASK		0xf
+
+struct ipq806x_gmac {
+	struct platform_device *pdev;
+	struct regmap *nss_common;
+	struct regmap *qsgmii_csr;
+	uint32_t id;
+	struct clk *core_clk;
+	phy_interface_t phy_mode;
+};
+
+static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+	struct device *dev = &gmac->pdev->dev;
+	int div;
+
+	switch (speed) {
+	case SPEED_1000:
+		div = NSS_COMMON_CLK_DIV_SGMII_1000;
+		break;
+
+	case SPEED_100:
+		div = NSS_COMMON_CLK_DIV_SGMII_100;
+		break;
+
+	case SPEED_10:
+		div = NSS_COMMON_CLK_DIV_SGMII_10;
+		break;
+
+	default:
+		dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed);
+		return -EINVAL;
+	}
+
+	return div;
+}
+
+static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+	struct device *dev = &gmac->pdev->dev;
+	int div;
+
+	switch (speed) {
+	case SPEED_1000:
+		div = NSS_COMMON_CLK_DIV_RGMII_1000;
+		break;
+
+	case SPEED_100:
+		div = NSS_COMMON_CLK_DIV_RGMII_100;
+		break;
+
+	case SPEED_10:
+		div = NSS_COMMON_CLK_DIV_RGMII_10;
+		break;
+
+	default:
+		dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed);
+		return -EINVAL;
+	}
+
+	return div;
+}
+
+static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+	uint32_t clk_bits, val;
+	int div;
+
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		div = get_clk_div_rgmii(gmac, speed);
+		clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+			   NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+		break;
+
+	case PHY_INTERFACE_MODE_SGMII:
+		div = get_clk_div_sgmii(gmac, speed);
+		clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+			   NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+		break;
+
+	default:
+		dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+			phy_modes(gmac->phy_mode));
+		return -EINVAL;
+	}
+
+	/* Disable the clocks */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+	val &= ~clk_bits;
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+	/* Set the divider */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val);
+	val &= ~(NSS_COMMON_CLK_DIV_MASK
+		 << NSS_COMMON_CLK_DIV_OFFSET(gmac->id));
+	val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id);
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val);
+
+	/* Enable the clock back */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+	val |= clk_bits;
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+	return 0;
+}
+
+static void *ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
+{
+	struct device *dev = &gmac->pdev->dev;
+
+	gmac->phy_mode = of_get_phy_mode(dev->of_node);
+	if (gmac->phy_mode < 0) {
+		dev_err(dev, "missing phy mode property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) {
+		dev_err(dev, "missing qcom id property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* The GMACs are called 1 to 4 in the documentation, but to simplify the
+	 * code and keep it consistent with the Linux convention, we'll number
+	 * them from 0 to 3 here.
+	 */
+	if (gmac->id < 0 || gmac->id > 3) {
+		dev_err(dev, "invalid gmac id\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	gmac->core_clk = devm_clk_get(dev, "stmmaceth");
+	if (IS_ERR(gmac->core_clk)) {
+		dev_err(dev, "missing stmmaceth clk property\n");
+		return gmac->core_clk;
+	}
+	clk_set_rate(gmac->core_clk, 266000000);
+
+	/* Setup the register map for the nss common registers */
+	gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node,
+							   "qcom,nss-common");
+	if (IS_ERR(gmac->nss_common)) {
+		dev_err(dev, "missing nss-common node\n");
+		return gmac->nss_common;
+	}
+
+	/* Setup the register map for the qsgmii csr registers */
+	gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node,
+							   "qcom,qsgmii-csr");
+	if (IS_ERR(gmac->qsgmii_csr)) {
+		dev_err(dev, "missing qsgmii-csr node\n");
+		return gmac->qsgmii_csr;
+	}
+
+	return NULL;
+}
+
+static void *ipq806x_gmac_setup(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ipq806x_gmac *gmac;
+	int val;
+	void *err;
+
+	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+	if (!gmac)
+		return ERR_PTR(-ENOMEM);
+
+	gmac->pdev = pdev;
+
+	err = ipq806x_gmac_of_parse(gmac);
+	if (err) {
+		dev_err(dev, "device tree parsing error\n");
+		return err;
+	}
+
+	regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
+		     QSGMII_PCS_CAL_LCKDT_CTL_RST);
+
+	/* Inter frame gap is set to 12 */
+	val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
+	      12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
+	/* We also initiate an AXI low power exit request */
+	val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+			phy_modes(gmac->phy_mode));
+		return NULL;
+	}
+	regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
+
+	/* Configure the clock src according to the mode */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
+	val &= ~NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
+			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
+			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+			phy_modes(gmac->phy_mode));
+		return NULL;
+	}
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
+
+	/* Enable PTP clock */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
+		regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
+			     QSGMII_PHY_CDR_EN |
+			     QSGMII_PHY_RX_FRONT_EN |
+			     QSGMII_PHY_RX_SIGNAL_DETECT_EN |
+			     QSGMII_PHY_TX_DRIVER_EN |
+			     QSGMII_PHY_QSGMII_EN |
+			     0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
+			     0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
+			     0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
+			     0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
+			     0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
+	}
+
+	return gmac;
+}
+
+static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed)
+{
+	struct ipq806x_gmac *gmac = priv;
+
+	ipq806x_gmac_set_speed(gmac, speed);
+}
+
+static const struct stmmac_of_data ipq806x_gmac_data = {
+	.has_gmac	= 1,
+	.setup		= ipq806x_gmac_setup,
+	.fix_mac_speed	= ipq806x_gmac_fix_mac_speed,
+};
+
+static const struct of_device_id ipq806x_gmac_dwmac_match[] = {
+	{ .compatible = "qcom,ipq806x-gmac", .data = &ipq806x_gmac_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ipq806x_gmac_dwmac_match);
+
+static struct platform_driver ipq806x_gmac_dwmac_driver = {
+	.probe = stmmac_pltfr_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name		= "ipq806x-gmac-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table	= ipq806x_gmac_dwmac_match,
+	},
+};
+module_platform_driver(ipq806x_gmac_dwmac_driver);
+
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm Atheros IPQ806x DWMAC specific glue layer");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e4f273976071..c46178cf4d50 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -52,6 +52,7 @@
 #include "stmmac_ptp.h"
 #include "stmmac.h"
 #include <linux/reset.h>
+#include <linux/of_mdio.h>
 
 #define STMMAC_ALIGN(x)	L1_CACHE_ALIGN(x)
 
@@ -816,18 +817,25 @@ static int stmmac_init_phy(struct net_device *dev)
 	priv->speed = 0;
 	priv->oldduplex = -1;
 
-	if (priv->plat->phy_bus_name)
-		snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
-			 priv->plat->phy_bus_name, priv->plat->bus_id);
-	else
-		snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
-			 priv->plat->bus_id);
+	if (priv->plat->phy_node) {
+		phydev = of_phy_connect(dev, priv->plat->phy_node,
+					&stmmac_adjust_link, 0, interface);
+	} else {
+		if (priv->plat->phy_bus_name)
+			snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
+				 priv->plat->phy_bus_name, priv->plat->bus_id);
+		else
+			snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+				 priv->plat->bus_id);
 
-	snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
-		 priv->plat->phy_addr);
-	pr_debug("stmmac_init_phy:  trying to attach to %s\n", phy_id_fmt);
+		snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+			 priv->plat->phy_addr);
+		pr_debug("stmmac_init_phy:  trying to attach to %s\n",
+			 phy_id_fmt);
 
-	phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface);
+		phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
+				     interface);
+	}
 
 	if (IS_ERR(phydev)) {
 		pr_err("%s: Could not attach to PHY\n", dev->name);
@@ -848,7 +856,7 @@ static int stmmac_init_phy(struct net_device *dev)
 	 * device as well.
 	 * Note: phydev->phy_id is the result of reading the UID PHY registers.
 	 */
-	if (phydev->phy_id == 0) {
+	if (!priv->plat->phy_node && phydev->phy_id == 0) {
 		phy_disconnect(phydev);
 		return -ENODEV;
 	}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 1664c0186f5b..f3918c7e7eeb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -28,6 +28,7 @@
 #include <linux/of.h>
 #include <linux/of_net.h>
 #include <linux/of_device.h>
+#include <linux/of_mdio.h>
 
 #include "stmmac.h"
 #include "stmmac_platform.h"
@@ -144,13 +145,24 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
 	/* Default to phy auto-detection */
 	plat->phy_addr = -1;
 
+	/* If we find a phy-handle property, use it as the PHY */
+	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+
+	/* If phy-handle is not specified, check if we have a fixed-phy */
+	if (!plat->phy_node && of_phy_is_fixed_link(np)) {
+		if ((of_phy_register_fixed_link(np) < 0))
+			return -ENODEV;
+
+		plat->phy_node = of_node_get(np);
+	}
+
 	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
 	 * and warn of its use. Remove this when phy node support is added.
 	 */
 	if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
 		dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
 
-	if (plat->phy_bus_name)
+	if (plat->phy_node || plat->phy_bus_name)
 		plat->mdio_bus_data = NULL;
 	else
 		plat->mdio_bus_data =
@@ -208,8 +220,10 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
 	if (of_find_property(np, "snps,pbl", NULL)) {
 		dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
 				       GFP_KERNEL);
-		if (!dma_cfg)
+		if (!dma_cfg) {
+			of_node_put(np);
 			return -ENOMEM;
+		}
 		plat->dma_cfg = dma_cfg;
 		of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
 		dma_cfg->fixed_burst =
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
index ebd63fd05649..dc4254b8cbbc 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -289,5 +289,7 @@
 #define UBI32_CORE1_CLK				279
 #define UBI32_CORE2_CLK				280
 #define EBI2_AON_CLK				281
+#define NSSTCM_CLK_SRC				282
+#define NSSTCM_CLK				283
 
 #endif
diff --git a/include/dt-bindings/reset/qcom,gcc-ipq806x.h b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
index 0ad5ef930b5d..de9c8140931a 100644
--- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -129,4 +129,47 @@
 #define USB30_1_PHY_RESET				112
 #define NSSFB0_RESET					113
 #define NSSFB1_RESET					114
+#define UBI32_CORE1_CLKRST_CLAMP_RESET			115
+#define UBI32_CORE1_CLAMP_RESET				116
+#define UBI32_CORE1_AHB_RESET				117
+#define UBI32_CORE1_AXI_RESET				118
+#define UBI32_CORE2_CLKRST_CLAMP_RESET			119
+#define UBI32_CORE2_CLAMP_RESET				120
+#define UBI32_CORE2_AHB_RESET				121
+#define UBI32_CORE2_AXI_RESET				122
+#define GMAC_CORE1_RESET				123
+#define GMAC_CORE2_RESET				124
+#define GMAC_CORE3_RESET				125
+#define GMAC_CORE4_RESET				126
+#define GMAC_AHB_RESET					127
+#define NSS_CH0_RST_RX_CLK_N_RESET			128
+#define NSS_CH0_RST_TX_CLK_N_RESET			129
+#define NSS_CH0_RST_RX_125M_N_RESET			130
+#define NSS_CH0_HW_RST_RX_125M_N_RESET			131
+#define NSS_CH0_RST_TX_125M_N_RESET			132
+#define NSS_CH1_RST_RX_CLK_N_RESET			133
+#define NSS_CH1_RST_TX_CLK_N_RESET			134
+#define NSS_CH1_RST_RX_125M_N_RESET			135
+#define NSS_CH1_HW_RST_RX_125M_N_RESET			136
+#define NSS_CH1_RST_TX_125M_N_RESET			137
+#define NSS_CH2_RST_RX_CLK_N_RESET			138
+#define NSS_CH2_RST_TX_CLK_N_RESET			139
+#define NSS_CH2_RST_RX_125M_N_RESET			140
+#define NSS_CH2_HW_RST_RX_125M_N_RESET			141
+#define NSS_CH2_RST_TX_125M_N_RESET			142
+#define NSS_CH3_RST_RX_CLK_N_RESET			143
+#define NSS_CH3_RST_TX_CLK_N_RESET			144
+#define NSS_CH3_RST_RX_125M_N_RESET			145
+#define NSS_CH3_HW_RST_RX_125M_N_RESET			146
+#define NSS_CH3_RST_TX_125M_N_RESET			147
+#define NSS_RST_RX_250M_125M_N_RESET			148
+#define NSS_RST_TX_250M_125M_N_RESET			149
+#define NSS_QSGMII_TXPI_RST_N_RESET			150
+#define NSS_QSGMII_CDR_RST_N_RESET			151
+#define NSS_SGMII2_CDR_RST_N_RESET			152
+#define NSS_SGMII3_CDR_RST_N_RESET			153
+#define NSS_CAL_PRBS_RST_N_RESET			154
+#define NSS_LCKDT_RST_N_RESET				155
+#define NSS_SRDS_N_RESET				156
+
 #endif
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 7f484a239f53..c735f5c91eea 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -99,6 +99,7 @@ struct plat_stmmacenet_data {
 	int phy_addr;
 	int interface;
 	struct stmmac_mdio_bus_data *mdio_bus_data;
+	struct device_node *phy_node;
 	struct stmmac_dma_cfg *dma_cfg;
 	int clk_csr;
 	int has_gmac;