Merge branch 'renesas/drivers-sci2' into next/drivers

* renesas/drivers-sci2:
  serial: sh-sci: Rework baud rate calculation
  serial: sh-sci: Compute overrun_bit without using baud rate algo
  serial: sh-sci: Remove unused GPIO request code
  serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
  serial: sh-sci: Support resources passed through platform resources
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Sort headers alphabetically
  serial: sh-sci: Convert to clk_prepare/unprepare
  serial: sh-sci: Don't enable/disable port from within break timer
  serial: sh-sci: Fix warnings due to improper casts and printk formats

3 files changed, 164 insertions, 192 deletions

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7d8103cd3e2e..e4bf0e435af6 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -23,35 +23,34 @@
 
 #undef DEBUG
 
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/ctype.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/errno.h>
-#include <linux/sh_dma.h>
-#include <linux/timer.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/sysrq.h>
 #include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/module.h>
 #include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
 #include <linux/notifier.h>
+#include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/ctype.h>
-#include <linux/err.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/sh_bios.h>
@@ -64,6 +63,10 @@ struct sci_port {
 
 	/* Platform configuration */
 	struct plat_sci_port	*cfg;
+	int			overrun_bit;
+	unsigned int		error_mask;
+	unsigned int		sampling_rate;
+
 
 	/* Break timer */
 	struct timer_list	break_timer;
@@ -74,8 +77,8 @@ struct sci_port {
 	/* Function clock */
 	struct clk		*fclk;
 
+	int			irqs[SCIx_NR_IRQS];
 	char			*irqstr[SCIx_NR_IRQS];
-	char			*gpiostr[SCIx_NR_FNS];
 
 	struct dma_chan			*chan_tx;
 	struct dma_chan			*chan_rx;
@@ -421,9 +424,9 @@ static void sci_port_enable(struct sci_port *sci_port)
 
 	pm_runtime_get_sync(sci_port->port.dev);
 
-	clk_enable(sci_port->iclk);
+	clk_prepare_enable(sci_port->iclk);
 	sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
-	clk_enable(sci_port->fclk);
+	clk_prepare_enable(sci_port->fclk);
 }
 
 static void sci_port_disable(struct sci_port *sci_port)
@@ -431,8 +434,16 @@ static void sci_port_disable(struct sci_port *sci_port)
 	if (!sci_port->port.dev)
 		return;
 
-	clk_disable(sci_port->fclk);
-	clk_disable(sci_port->iclk);
+	/* Cancel the break timer to ensure that the timer handler will not try
+	 * to access the hardware with clocks and power disabled. Reset the
+	 * break flag to make the break debouncing state machine ready for the
+	 * next break.
+	 */
+	del_timer_sync(&sci_port->break_timer);
+	sci_port->break_flag = 0;
+
+	clk_disable_unprepare(sci_port->fclk);
+	clk_disable_unprepare(sci_port->iclk);
 
 	pm_runtime_put_sync(sci_port->port.dev);
 }
@@ -557,7 +568,7 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return 1;
 
 	/* Cast for ARM damage */
-	return !!__raw_readb((void __iomem *)s->cfg->port_reg);
+	return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg);
 }
 
 /* ********************************************************************** *
@@ -733,8 +744,6 @@ static void sci_break_timer(unsigned long data)
 {
 	struct sci_port *port = (struct sci_port *)data;
 
-	sci_port_enable(port);
-
 	if (sci_rxd_in(&port->port) == 0) {
 		port->break_flag = 1;
 		sci_schedule_break_timer(port);
@@ -744,8 +753,6 @@ static void sci_break_timer(unsigned long data)
 		sci_schedule_break_timer(port);
 	} else
 		port->break_flag = 0;
-
-	sci_port_disable(port);
 }
 
 static int sci_handle_errors(struct uart_port *port)
@@ -755,19 +762,15 @@ static int sci_handle_errors(struct uart_port *port)
 	struct tty_port *tport = &port->state->port;
 	struct sci_port *s = to_sci_port(port);
 
-	/*
-	 * Handle overruns, if supported.
-	 */
-	if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
-		if (status & (1 << s->cfg->overrun_bit)) {
-			port->icount.overrun++;
+	/* Handle overruns */
+	if (status & (1 << s->overrun_bit)) {
+		port->icount.overrun++;
 
-			/* overrun error */
-			if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
-				copied++;
+		/* overrun error */
+		if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
+			copied++;
 
-			dev_notice(port->dev, "overrun error");
-		}
+		dev_notice(port->dev, "overrun error");
 	}
 
 	if (status & SCxSR_FER(port)) {
@@ -829,7 +832,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
 	if (!reg->size)
 		return 0;
 
-	if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
+	if ((serial_port_in(port, SCLSR) & (1 << s->overrun_bit))) {
 		serial_port_out(port, SCLSR, 0);
 
 		port->icount.overrun++;
@@ -1075,19 +1078,19 @@ static int sci_request_irq(struct sci_port *port)
 
 	for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
 		struct sci_irq_desc *desc;
-		unsigned int irq;
+		int irq;
 
 		if (SCIx_IRQ_IS_MUXED(port)) {
 			i = SCIx_MUX_IRQ;
 			irq = up->irq;
 		} else {
-			irq = port->cfg->irqs[i];
+			irq = port->irqs[i];
 
 			/*
 			 * Certain port types won't support all of the
 			 * available interrupt sources.
 			 */
-			if (unlikely(!irq))
+			if (unlikely(irq < 0))
 				continue;
 		}
 
@@ -1112,7 +1115,7 @@ static int sci_request_irq(struct sci_port *port)
 
 out_noirq:
 	while (--i >= 0)
-		free_irq(port->cfg->irqs[i], port);
+		free_irq(port->irqs[i], port);
 
 out_nomem:
 	while (--j >= 0)
@@ -1130,16 +1133,16 @@ static void sci_free_irq(struct sci_port *port)
 	 * IRQ first.
 	 */
 	for (i = 0; i < SCIx_NR_IRQS; i++) {
-		unsigned int irq = port->cfg->irqs[i];
+		int irq = port->irqs[i];
 
 		/*
 		 * Certain port types won't support all of the available
 		 * interrupt sources.
 		 */
-		if (unlikely(!irq))
+		if (unlikely(irq < 0))
 			continue;
 
-		free_irq(port->cfg->irqs[i], port);
+		free_irq(port->irqs[i], port);
 		kfree(port->irqstr[i]);
 
 		if (SCIx_IRQ_IS_MUXED(port)) {
@@ -1149,67 +1152,6 @@ static void sci_free_irq(struct sci_port *port)
 	}
 }
 
-static const char *sci_gpio_names[SCIx_NR_FNS] = {
-	"sck", "rxd", "txd", "cts", "rts",
-};
-
-static const char *sci_gpio_str(unsigned int index)
-{
-	return sci_gpio_names[index];
-}
-
-static void sci_init_gpios(struct sci_port *port)
-{
-	struct uart_port *up = &port->port;
-	int i;
-
-	if (!port->cfg)
-		return;
-
-	for (i = 0; i < SCIx_NR_FNS; i++) {
-		const char *desc;
-		int ret;
-
-		if (!port->cfg->gpios[i])
-			continue;
-
-		desc = sci_gpio_str(i);
-
-		port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s",
-					     dev_name(up->dev), desc);
-
-		/*
-		 * If we've failed the allocation, we can still continue
-		 * on with a NULL string.
-		 */
-		if (!port->gpiostr[i])
-			dev_notice(up->dev, "%s string allocation failure\n",
-				   desc);
-
-		ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]);
-		if (unlikely(ret != 0)) {
-			dev_notice(up->dev, "failed %s gpio request\n", desc);
-
-			/*
-			 * If we can't get the GPIO for whatever reason,
-			 * no point in keeping the verbose string around.
-			 */
-			kfree(port->gpiostr[i]);
-		}
-	}
-}
-
-static void sci_free_gpios(struct sci_port *port)
-{
-	int i;
-
-	for (i = 0; i < SCIx_NR_FNS; i++)
-		if (port->cfg->gpios[i]) {
-			gpio_free(port->cfg->gpios[i]);
-			kfree(port->gpiostr[i]);
-		}
-}
-
 static unsigned int sci_tx_empty(struct uart_port *port)
 {
 	unsigned short status = serial_port_in(port, SCxSR);
@@ -1309,7 +1251,7 @@ static int sci_dma_rx_push(struct sci_port *s, size_t count)
 	}
 
 	if (room < count)
-		dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
+		dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
 			 count - room);
 	if (!room)
 		return room;
@@ -1442,7 +1384,7 @@ static void work_fn_rx(struct work_struct *work)
 		int count;
 
 		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
-		dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
+		dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
 			sh_desc->partial, sh_desc->cookie);
 
 		spin_lock_irqsave(&port->lock, flags);
@@ -1655,7 +1597,7 @@ static void rx_timer_fn(unsigned long arg)
 
 	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		scr &= ~0x4000;
-		enable_irq(s->cfg->irqs[1]);
+		enable_irq(s->irqs[SCIx_RXI_IRQ]);
 	}
 	serial_port_out(port, SCSCR, scr | SCSCR_RIE);
 	dev_dbg(port->dev, "DMA Rx timed out\n");
@@ -1691,16 +1633,17 @@ static void sci_request_dma(struct uart_port *port)
 		s->chan_tx = chan;
 		sg_init_table(&s->sg_tx, 1);
 		/* UART circular tx buffer is an aligned page. */
-		BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+		BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
 		sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
-			    UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
+			    UART_XMIT_SIZE,
+			    (uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
 		nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
 		if (!nent)
 			sci_tx_dma_release(s, false);
 		else
-			dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
-				sg_dma_len(&s->sg_tx),
-				port->state->xmit.buf, sg_dma_address(&s->sg_tx));
+			dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
+				sg_dma_len(&s->sg_tx), port->state->xmit.buf,
+				&sg_dma_address(&s->sg_tx));
 
 		s->sg_len_tx = nent;
 
@@ -1740,7 +1683,7 @@ static void sci_request_dma(struct uart_port *port)
 
 			sg_init_table(sg, 1);
 			sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
-				    (int)buf[i] & ~PAGE_MASK);
+				    (uintptr_t)buf[i] & ~PAGE_MASK);
 			sg_dma_address(sg) = dma[i];
 		}
 
@@ -1808,20 +1751,21 @@ static void sci_shutdown(struct uart_port *port)
 	sci_free_irq(s);
 }
 
-static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
+static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
 				   unsigned long freq)
 {
-	switch (algo_id) {
+	if (s->sampling_rate)
+		return DIV_ROUND_CLOSEST(freq, s->sampling_rate * bps) - 1;
+
+	switch (s->cfg->scbrr_algo_id) {
 	case SCBRR_ALGO_1:
-		return ((freq + 16 * bps) / (16 * bps) - 1);
+		return freq / (16 * bps);
 	case SCBRR_ALGO_2:
-		return ((freq + 16 * bps) / (32 * bps) - 1);
+		return DIV_ROUND_CLOSEST(freq, 32 * bps) - 1;
 	case SCBRR_ALGO_3:
-		return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
+		return freq / (8 * bps);
 	case SCBRR_ALGO_4:
-		return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
-	case SCBRR_ALGO_5:
-		return (((freq * 1000 / 32) / bps) - 1);
+		return DIV_ROUND_CLOSEST(freq, 16 * bps) - 1;
 	}
 
 	/* Warn, but use a safe default */
@@ -1903,12 +1847,11 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
 	if (likely(baud && port->uartclk)) {
-		if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) {
+		if (s->cfg->type == PORT_HSCIF) {
 			sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
 					    &cks);
 		} else {
-			t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud,
-					   port->uartclk);
+			t = sci_scbrr_calc(s, baud, port->uartclk);
 			for (cks = 0; t >= 256 && cks <= 3; cks++)
 				t >>= 2;
 		}
@@ -2115,10 +2058,6 @@ static void sci_config_port(struct uart_port *port, int flags)
 
 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	struct sci_port *s = to_sci_port(port);
-
-	if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
-		return -EINVAL;
 	if (ser->baud_base < 2400)
 		/* No paper tape reader for Mitch.. */
 		return -EINVAL;
@@ -2151,11 +2090,13 @@ static struct uart_ops sci_uart_ops = {
 };
 
 static int sci_init_single(struct platform_device *dev,
-				     struct sci_port *sci_port,
-				     unsigned int index,
-				     struct plat_sci_port *p)
+			   struct sci_port *sci_port, unsigned int index,
+			   struct plat_sci_port *p, bool early)
 {
 	struct uart_port *port = &sci_port->port;
+	const struct resource *res;
+	unsigned int sampling_rate;
+	unsigned int i;
 	int ret;
 
 	sci_port->cfg	= p;
@@ -2164,31 +2105,90 @@ static int sci_init_single(struct platform_device *dev,
 	port->iotype	= UPIO_MEM;
 	port->line	= index;
 
+	if (dev->num_resources) {
+		/* Device has resources, use them. */
+		res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+		if (res == NULL)
+			return -ENOMEM;
+
+		port->mapbase = res->start;
+
+		for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
+			sci_port->irqs[i] = platform_get_irq(dev, i);
+
+		/* The SCI generates several interrupts. They can be muxed
+		 * together or connected to different interrupt lines. In the
+		 * muxed case only one interrupt resource is specified. In the
+		 * non-muxed case three or four interrupt resources are
+		 * specified, as the BRI interrupt is optional.
+		 */
+		if (sci_port->irqs[0] < 0)
+			return -ENXIO;
+
+		if (sci_port->irqs[1] < 0) {
+			sci_port->irqs[1] = sci_port->irqs[0];
+			sci_port->irqs[2] = sci_port->irqs[0];
+			sci_port->irqs[3] = sci_port->irqs[0];
+		}
+	} else {
+		/* No resources, use old-style platform data. */
+		port->mapbase = p->mapbase;
+		for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
+			sci_port->irqs[i] = p->irqs[i] ? p->irqs[i] : -ENXIO;
+	}
+
+	if (p->regtype == SCIx_PROBE_REGTYPE) {
+		ret = sci_probe_regmap(p);
+		if (unlikely(ret))
+			return ret;
+	}
+
 	switch (p->type) {
 	case PORT_SCIFB:
 		port->fifosize = 256;
+		sci_port->overrun_bit = 9;
+		sampling_rate = 16;
 		break;
 	case PORT_HSCIF:
 		port->fifosize = 128;
+		sampling_rate = 0;
+		sci_port->overrun_bit = 0;
 		break;
 	case PORT_SCIFA:
 		port->fifosize = 64;
+		sci_port->overrun_bit = 9;
+		sampling_rate = 16;
 		break;
 	case PORT_SCIF:
 		port->fifosize = 16;
+		if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) {
+			sci_port->overrun_bit = 9;
+			sampling_rate = 16;
+		} else {
+			sci_port->overrun_bit = 0;
+			sampling_rate = 32;
+		}
 		break;
 	default:
 		port->fifosize = 1;
+		sci_port->overrun_bit = 5;
+		sampling_rate = 32;
 		break;
 	}
 
-	if (p->regtype == SCIx_PROBE_REGTYPE) {
-		ret = sci_probe_regmap(p);
-		if (unlikely(ret))
-			return ret;
+	/* Set the sampling rate if the baud rate calculation algorithm isn't
+	 * specified.
+	 */
+	if (p->scbrr_algo_id == SCBRR_ALGO_NONE) {
+		/* SCIFA on sh7723 and sh7724 need a custom sampling rate that
+		 * doesn't match the SoC datasheet, this should be investigated.
+		 * Let platform data override the sampling rate for now.
+		 */
+		sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate
+					: sampling_rate;
 	}
 
-	if (dev) {
+	if (!early) {
 		sci_port->iclk = clk_get(&dev->dev, "sci_ick");
 		if (IS_ERR(sci_port->iclk)) {
 			sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
@@ -2208,8 +2208,6 @@ static int sci_init_single(struct platform_device *dev,
 
 		port->dev = &dev->dev;
 
-		sci_init_gpios(sci_port);
-
 		pm_runtime_enable(&dev->dev);
 	}
 
@@ -2220,32 +2218,22 @@ static int sci_init_single(struct platform_device *dev,
 	/*
 	 * Establish some sensible defaults for the error detection.
 	 */
-	if (!p->error_mask)
-		p->error_mask = (p->type == PORT_SCI) ?
+	sci_port->error_mask = (p->type == PORT_SCI) ?
 			SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
 
 	/*
 	 * Establish sensible defaults for the overrun detection, unless
 	 * the part has explicitly disabled support for it.
 	 */
-	if (p->overrun_bit != SCIx_NOT_SUPPORTED) {
-		if (p->type == PORT_SCI)
-			p->overrun_bit = 5;
-		else if (p->scbrr_algo_id == SCBRR_ALGO_4)
-			p->overrun_bit = 9;
-		else
-			p->overrun_bit = 0;
 
-		/*
-		 * Make the error mask inclusive of overrun detection, if
-		 * supported.
-		 */
-		p->error_mask |= (1 << p->overrun_bit);
-	}
+	/*
+	 * Make the error mask inclusive of overrun detection, if
+	 * supported.
+	 */
+	sci_port->error_mask |= 1 << sci_port->overrun_bit;
 
-	port->mapbase		= p->mapbase;
 	port->type		= p->type;
-	port->flags		= p->flags;
+	port->flags		= UPF_FIXED_PORT | p->flags;
 	port->regshift		= p->regshift;
 
 	/*
@@ -2255,7 +2243,7 @@ static int sci_init_single(struct platform_device *dev,
 	 *
 	 * For the muxed case there's nothing more to do.
 	 */
-	port->irq		= p->irqs[SCIx_RXI_IRQ];
+	port->irq		= sci_port->irqs[SCIx_RXI_IRQ];
 	port->irqflags		= 0;
 
 	port->serial_in		= sci_serial_in;
@@ -2270,8 +2258,6 @@ static int sci_init_single(struct platform_device *dev,
 
 static void sci_cleanup_single(struct sci_port *port)
 {
-	sci_free_gpios(port);
-
 	clk_put(port->iclk);
 	clk_put(port->fclk);
 
@@ -2387,7 +2373,7 @@ static int sci_probe_earlyprintk(struct platform_device *pdev)
 
 	early_serial_console.index = pdev->id;
 
-	sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg);
+	sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
 
 	serial_console_setup(&early_serial_console, early_serial_buf);
 
@@ -2454,7 +2440,7 @@ static int sci_probe_single(struct platform_device *dev,
 		return -EINVAL;
 	}
 
-	ret = sci_init_single(dev, sciport, index, p);
+	ret = sci_init_single(dev, sciport, index, p, false);
 	if (ret)
 		return ret;
 
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 5aca7364634c..d5db81a0a430 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -9,7 +9,7 @@
 #define SCxSR_PER(port)		(((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
 #define SCxSR_BRK(port)		(((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
 
-#define SCxSR_ERRORS(port)	(to_sci_port(port)->cfg->error_mask)
+#define SCxSR_ERRORS(port)	(to_sci_port(port)->error_mask)
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 50fe651da965..af414e1895a5 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -11,11 +11,11 @@
 #define SCIx_NOT_SUPPORTED	(-1)
 
 enum {
-	SCBRR_ALGO_1,		/* ((clk + 16 * bps) / (16 * bps) - 1) */
-	SCBRR_ALGO_2,		/* ((clk + 16 * bps) / (32 * bps) - 1) */
-	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
-	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
-	SCBRR_ALGO_5,		/* (((clk * 1000 / 32) / bps) - 1) */
+	SCBRR_ALGO_NONE,	/* Compute sampling rate in the driver */
+	SCBRR_ALGO_1,		/* clk / (16 * bps) */
+	SCBRR_ALGO_2,		/* DIV_ROUND_CLOSEST(clk, 32 * bps) - 1 */
+	SCBRR_ALGO_3,		/* clk / (8 * bps) */
+	SCBRR_ALGO_4,		/* DIV_ROUND_CLOSEST(clk, 16 * bps) - 1 */
 	SCBRR_ALGO_6,		/* HSCIF variable sample rate algorithm */
 };
 
@@ -70,17 +70,6 @@ enum {
 	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
 };
 
-/* Offsets into the sci_port->gpios array */
-enum {
-	SCIx_SCK,
-	SCIx_RXD,
-	SCIx_TXD,
-	SCIx_CTS,
-	SCIx_RTS,
-
-	SCIx_NR_FNS,
-};
-
 enum {
 	SCIx_PROBE_REGTYPE,
 
@@ -108,10 +97,10 @@ enum {
 }
 
 #define SCIx_IRQ_IS_MUXED(port)			\
-	((port)->cfg->irqs[SCIx_ERI_IRQ] ==	\
-	 (port)->cfg->irqs[SCIx_RXI_IRQ]) ||	\
-	((port)->cfg->irqs[SCIx_ERI_IRQ] &&	\
-	 !(port)->cfg->irqs[SCIx_RXI_IRQ])
+	((port)->irqs[SCIx_ERI_IRQ] ==	\
+	 (port)->irqs[SCIx_RXI_IRQ]) ||	\
+	((port)->irqs[SCIx_ERI_IRQ] &&	\
+	 ((port)->irqs[SCIx_RXI_IRQ] < 0))
 /*
  * SCI register subset common for all port types.
  * Not all registers will exist on all parts.
@@ -142,20 +131,17 @@ struct plat_sci_port_ops {
 struct plat_sci_port {
 	unsigned long	mapbase;		/* resource base */
 	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
-	unsigned int	gpios[SCIx_NR_FNS];	/* SCK, RXD, TXD, CTS, RTS */
 	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
 	upf_t		flags;			/* UPF_* flags */
 	unsigned long	capabilities;		/* Port features/capabilities */
 
+	unsigned int	sampling_rate;
 	unsigned int	scbrr_algo_id;		/* SCBRR calculation algo */
 	unsigned int	scscr;			/* SCSCR initialization */
 
 	/*
 	 * Platform overrides if necessary, defaults otherwise.
 	 */
-	int		overrun_bit;
-	unsigned int	error_mask;
-
 	int		port_reg;
 	unsigned char	regshift;
 	unsigned char	regtype;