Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: appletouch - improve powersaving for Geyser3 devices
  Input: lifebook - fix an oops on Panasonic CF-18
  Input: document intended meaning of KEY_SWITCHVIDEOMODE
  Input: switch to using seq_list_xxx helpers
  Input: i8042 - give more trust to PNP data on i386
  Input: add driver for Fujitsu serial touchscreens
  Input: ads7846 - re-check pendown status before reporting events
  Input: ads7846 - introduce sample settling delay
  Input: xpad - add support for leds on xbox 360 pad

13 files changed, 562 insertions, 114 deletions

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 75b4d2a83dd9..5fe755586623 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -471,37 +471,16 @@ static unsigned int input_proc_devices_poll(struct file *file, poll_table *wait)
 	return 0;
 }
 
-static struct list_head *list_get_nth_element(struct list_head *list, loff_t *pos)
-{
-	struct list_head *node;
-	loff_t i = 0;
-
-	list_for_each(node, list)
-		if (i++ == *pos)
-			return node;
-
-	return NULL;
-}
-
-static struct list_head *list_get_next_element(struct list_head *list, struct list_head *element, loff_t *pos)
-{
-	if (element->next == list)
-		return NULL;
-
-	++(*pos);
-	return element->next;
-}
-
 static void *input_devices_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	/* acquire lock here ... Yes, we do need locking, I knowi, I know... */
 
-	return list_get_nth_element(&input_dev_list, pos);
+	return seq_list_start(&input_dev_list, *pos);
 }
 
 static void *input_devices_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
-	return list_get_next_element(&input_dev_list, v, pos);
+	return seq_list_next(v, &input_dev_list, pos);
 }
 
 static void input_devices_seq_stop(struct seq_file *seq, void *v)
@@ -592,13 +571,13 @@ static void *input_handlers_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	/* acquire lock here ... Yes, we do need locking, I knowi, I know... */
 	seq->private = (void *)(unsigned long)*pos;
-	return list_get_nth_element(&input_handler_list, pos);
+	return seq_list_start(&input_handler_list, *pos);
 }
 
 static void *input_handlers_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	seq->private = (void *)(unsigned long)(*pos + 1);
-	return list_get_next_element(&input_handler_list, v, pos);
+	return seq_list_next(v, &input_handler_list, pos);
 }
 
 static void input_handlers_seq_stop(struct seq_file *seq, void *v)
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 12db72d83ea0..e2abe18e575d 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -275,4 +275,11 @@ config JOYSTICK_XPAD_FF
 	---help---
 	  Say Y here if you want to take advantage of xbox 360 rumble features.
 
+config JOYSTICK_XPAD_LEDS
+	bool "LED Support for Xbox360 controller 'BigX' LED"
+	depends on LEDS_CLASS && JOYSTICK_XPAD
+	---help---
+	  This option enables support for the LED which surrounds the Big X on
+	  XBox 360 controller.
+
 endif
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 244089c52650..28080395899c 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -191,13 +191,18 @@ struct usb_xpad {
 	unsigned char *idata;		/* input data */
 	dma_addr_t idata_dma;
 
-#ifdef CONFIG_JOYSTICK_XPAD_FF
+#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
 	struct urb *irq_out;		/* urb for interrupt out report */
 	unsigned char *odata;		/* output data */
 	dma_addr_t odata_dma;
+	struct mutex odata_mutex;
+#endif
+
+#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
+	struct xpad_led *led;
 #endif
 
-	char phys[65];			/* physical device path */
+	char phys[64];			/* physical device path */
 
 	int dpad_mapping;		/* map d-pad to buttons or to axes */
 	int xtype;			/* type of xbox device */
@@ -349,7 +354,7 @@ exit:
 		     __FUNCTION__, retval);
 }
 
-#ifdef CONFIG_JOYSTICK_XPAD_FF
+#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
 static void xpad_irq_out(struct urb *urb)
 {
 	int retval;
@@ -376,29 +381,7 @@ exit:
 		   __FUNCTION__, retval);
 }
 
-static int xpad_play_effect(struct input_dev *dev, void *data,
-			    struct ff_effect *effect)
-{
-	struct usb_xpad *xpad = input_get_drvdata(dev);
-
-	if (effect->type == FF_RUMBLE) {
-		__u16 strong = effect->u.rumble.strong_magnitude;
-		__u16 weak = effect->u.rumble.weak_magnitude;
-		xpad->odata[0] = 0x00;
-		xpad->odata[1] = 0x08;
-		xpad->odata[2] = 0x00;
-		xpad->odata[3] = strong / 256;
-		xpad->odata[4] = weak / 256;
-		xpad->odata[5] = 0x00;
-		xpad->odata[6] = 0x00;
-		xpad->odata[7] = 0x00;
-		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
-	}
-
-	return 0;
-}
-
-static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad)
+static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 {
 	struct usb_endpoint_descriptor *ep_irq_out;
 	int error = -ENOMEM;
@@ -411,6 +394,8 @@ static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad)
 	if (!xpad->odata)
 		goto fail1;
 
+	mutex_init(&xpad->odata_mutex);
+
 	xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
 	if (!xpad->irq_out)
 		goto fail2;
@@ -423,25 +408,19 @@ static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad)
 	xpad->irq_out->transfer_dma = xpad->odata_dma;
 	xpad->irq_out->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
-
-	error = input_ff_create_memless(xpad->dev, NULL, xpad_play_effect);
-	if (error)
-		goto fail2;
-
 	return 0;
 
  fail2:	usb_buffer_free(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
  fail1:	return error;
 }
 
-static void xpad_stop_ff(struct usb_xpad *xpad)
+static void xpad_stop_output(struct usb_xpad *xpad)
 {
 	if (xpad->xtype == XTYPE_XBOX360)
 		usb_kill_urb(xpad->irq_out);
 }
 
-static void xpad_deinit_ff(struct usb_xpad *xpad)
+static void xpad_deinit_output(struct usb_xpad *xpad)
 {
 	if (xpad->xtype == XTYPE_XBOX360) {
 		usb_free_urb(xpad->irq_out);
@@ -449,13 +428,130 @@ static void xpad_deinit_ff(struct usb_xpad *xpad)
 				xpad->odata, xpad->odata_dma);
 	}
 }
+#else
+static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; }
+static void xpad_deinit_output(struct usb_xpad *xpad) {}
+static void xpad_stop_output(struct usb_xpad *xpad) {}
+#endif
+
+#ifdef CONFIG_JOYSTICK_XPAD_FF
+static int xpad_play_effect(struct input_dev *dev, void *data,
+			    struct ff_effect *effect)
+{
+	struct usb_xpad *xpad = input_get_drvdata(dev);
 
+	if (effect->type == FF_RUMBLE) {
+		__u16 strong = effect->u.rumble.strong_magnitude;
+		__u16 weak = effect->u.rumble.weak_magnitude;
+		xpad->odata[0] = 0x00;
+		xpad->odata[1] = 0x08;
+		xpad->odata[2] = 0x00;
+		xpad->odata[3] = strong / 256;
+		xpad->odata[4] = weak / 256;
+		xpad->odata[5] = 0x00;
+		xpad->odata[6] = 0x00;
+		xpad->odata[7] = 0x00;
+		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+	}
+
+	return 0;
+}
+
+static int xpad_init_ff(struct usb_xpad *xpad)
+{
+	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
+
+	return input_ff_create_memless(xpad->dev, NULL, xpad_play_effect);
+}
+
+#else
+static int xpad_init_ff(struct usb_xpad *xpad) { return 0; }
+#endif
+
+#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
+#include <linux/leds.h>
+
+struct xpad_led {
+	char name[16];
+	struct led_classdev led_cdev;
+	struct usb_xpad *xpad;
+};
+
+static void xpad_send_led_command(struct usb_xpad *xpad, int command)
+{
+	if (command >= 0 && command < 14) {
+		mutex_lock(&xpad->odata_mutex);
+		xpad->odata[0] = 0x01;
+		xpad->odata[1] = 0x03;
+		xpad->odata[2] = command;
+		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+		mutex_unlock(&xpad->odata_mutex);
+	}
+}
+
+static void xpad_led_set(struct led_classdev *led_cdev,
+			 enum led_brightness value)
+{
+	struct xpad_led *xpad_led = container_of(led_cdev,
+						 struct xpad_led, led_cdev);
+
+	xpad_send_led_command(xpad_led->xpad, value);
+}
+
+static int xpad_led_probe(struct usb_xpad *xpad)
+{
+	static atomic_t led_seq	= ATOMIC_INIT(0);
+	long led_no;
+	struct xpad_led *led;
+	struct led_classdev *led_cdev;
+	int error;
+
+	if (xpad->xtype != XTYPE_XBOX360)
+		return 0;
+
+	xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led_no = (long)atomic_inc_return(&led_seq) - 1;
+
+	snprintf(led->name, sizeof(led->name), "xpad%ld", led_no);
+	led->xpad = xpad;
+
+	led_cdev = &led->led_cdev;
+	led_cdev->name = led->name;
+	led_cdev->brightness_set = xpad_led_set;
+
+	error = led_classdev_register(&xpad->udev->dev, led_cdev);
+	if (error) {
+		kfree(led);
+		xpad->led = NULL;
+		return error;
+	}
+
+	/*
+	 * Light up the segment corresponding to controller number
+	 */
+	xpad_send_led_command(xpad, (led_no % 4) + 2);
+
+	return 0;
+}
+
+static void xpad_led_disconnect(struct usb_xpad *xpad)
+{
+	struct xpad_led *xpad_led = xpad->led;
+
+	if (xpad_led) {
+		led_classdev_unregister(&xpad_led->led_cdev);
+		kfree(xpad_led->name);
+	}
+}
 #else
-static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; }
-static void xpad_stop_ff(struct usb_xpad *xpad) { }
-static void xpad_deinit_ff(struct usb_xpad *xpad) { }
+static int xpad_led_probe(struct usb_xpad *xpad) { return 0; }
+static void xpad_led_disconnect(struct usb_xpad *xpad) { }
 #endif
 
+
 static int xpad_open(struct input_dev *dev)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
@@ -472,7 +568,7 @@ static void xpad_close(struct input_dev *dev)
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
 	usb_kill_urb(xpad->irq_in);
-	xpad_stop_ff(xpad);
+	xpad_stop_output(xpad);
 }
 
 static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
@@ -564,10 +660,18 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		for (i = 0; xpad_abs_pad[i] >= 0; i++)
 		    xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
 
-	error = xpad_init_ff(intf, xpad);
+	error = xpad_init_output(intf, xpad);
 	if (error)
 		goto fail2;
 
+	error = xpad_init_ff(xpad);
+	if (error)
+		goto fail3;
+
+	error = xpad_led_probe(xpad);
+	if (error)
+		goto fail3;
+
 	ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
 	usb_fill_int_urb(xpad->irq_in, udev,
 			 usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
@@ -578,12 +682,13 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	error = input_register_device(xpad->dev);
 	if (error)
-		goto fail3;
+		goto fail4;
 
 	usb_set_intfdata(intf, xpad);
 	return 0;
 
- fail3:	usb_free_urb(xpad->irq_in);
+ fail4:	usb_free_urb(xpad->irq_in);
+ fail3:	xpad_deinit_output(xpad);
  fail2:	usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
  fail1:	input_free_device(input_dev);
 	kfree(xpad);
@@ -597,8 +702,9 @@ static void xpad_disconnect(struct usb_interface *intf)
 
 	usb_set_intfdata(intf, NULL);
 	if (xpad) {
+		xpad_led_disconnect(xpad);
 		input_unregister_device(xpad->dev);
-		xpad_deinit_ff(xpad);
+		xpad_deinit_output(xpad);
 		usb_free_urb(xpad->irq_in);
 		usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
 				xpad->idata, xpad->idata_dma);
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index e3215267db11..2bea1b2c631c 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -155,6 +155,8 @@ struct atp {
 	int			xy_acc[ATP_XSENSORS + ATP_YSENSORS];
 	int			overflowwarn;	/* overflow warning printed? */
 	int			datalen;	/* size of an USB urb transfer */
+	int			idlecount;      /* number of empty packets */
+	struct work_struct      work;
 };
 
 #define dbg_dump(msg, tab) \
@@ -208,6 +210,55 @@ static inline int atp_is_geyser_3(struct atp *dev)
 		(productId == GEYSER4_JIS_PRODUCT_ID);
 }
 
+/*
+ * By default Geyser 3 device sends standard USB HID mouse
+ * packets (Report ID 2). This code changes device mode, so it
+ * sends raw sensor reports (Report ID 5).
+ */
+static int atp_geyser3_init(struct usb_device *udev)
+{
+	char data[8];
+	int size;
+
+	size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			ATP_GEYSER3_MODE_READ_REQUEST_ID,
+			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			ATP_GEYSER3_MODE_REQUEST_VALUE,
+			ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
+
+	if (size != 8) {
+		err("Could not do mode read request from device"
+		    " (Geyser 3 mode)");
+		return -EIO;
+	}
+
+	/* Apply the mode switch */
+	data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE;
+
+	size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			ATP_GEYSER3_MODE_WRITE_REQUEST_ID,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			ATP_GEYSER3_MODE_REQUEST_VALUE,
+			ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
+
+	if (size != 8) {
+		err("Could not do mode write request to device"
+		    " (Geyser 3 mode)");
+		return -EIO;
+	}
+	return 0;
+}
+
+/* Reinitialise the device if it's a geyser 3 */
+static void atp_reinit(struct work_struct *work)
+{
+	struct atp *dev = container_of(work, struct atp, work);
+	struct usb_device *udev = dev->udev;
+
+	dev->idlecount = 0;
+	atp_geyser3_init(udev);
+}
+
 static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
 			     int *z, int *fingers)
 {
@@ -439,8 +490,8 @@ static void atp_complete(struct urb* urb)
 		}
 		dev->x_old = x;
 		dev->y_old = y;
-	}
-	else if (!x && !y) {
+
+	} else if (!x && !y) {
 
 		dev->x_old = dev->y_old = -1;
 		input_report_key(dev->input, BTN_TOUCH, 0);
@@ -449,11 +500,21 @@ static void atp_complete(struct urb* urb)
 
 		/* reset the accumulator on release */
 		memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
-	}
 
-	input_report_key(dev->input, BTN_LEFT,
-			 !!dev->data[dev->datalen - 1]);
+		/* Geyser 3 will continue to send packets continually after
+		   the first touch unless reinitialised. Do so if it's been
+		   idle for a while in order to avoid waking the kernel up
+		   several hundred times a second */
+		if (atp_is_geyser_3(dev)) {
+			dev->idlecount++;
+			if (dev->idlecount == 10) {
+				dev->valid = 0;
+				schedule_work(&dev->work);
+			}
+		}
+	}
 
+	input_report_key(dev->input, BTN_LEFT, dev->data[dev->datalen - 1] & 1);
 	input_sync(dev->input);
 
 exit:
@@ -480,6 +541,7 @@ static void atp_close(struct input_dev *input)
 	struct atp *dev = input_get_drvdata(input);
 
 	usb_kill_urb(dev->urb);
+	cancel_work_sync(&dev->work);
 	dev->open = 0;
 }
 
@@ -528,40 +590,10 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
 		dev->datalen = 81;
 
 	if (atp_is_geyser_3(dev)) {
-		/*
-		 * By default Geyser 3 device sends standard USB HID mouse
-		 * packets (Report ID 2). This code changes device mode, so it
-		 * sends raw sensor reports (Report ID 5).
-		 */
-		char data[8];
-		int size;
-
-		size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-			ATP_GEYSER3_MODE_READ_REQUEST_ID,
-			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-			ATP_GEYSER3_MODE_REQUEST_VALUE,
-			ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
-
-		if (size != 8) {
-			err("Could not do mode read request from device"
-							" (Geyser 3 mode)");
+		/* switch to raw sensor mode */
+		if (atp_geyser3_init(udev))
 			goto err_free_devs;
-		}
-
-		/* Apply the mode switch */
-		data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE;
-
-		size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			ATP_GEYSER3_MODE_WRITE_REQUEST_ID,
-			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-			ATP_GEYSER3_MODE_REQUEST_VALUE,
-			ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
 
-		if (size != 8) {
-			err("Could not do mode write request to device"
-							" (Geyser 3 mode)");
-			goto err_free_devs;
-		}
 		printk("appletouch Geyser 3 inited.\n");
 	}
 
@@ -636,6 +668,8 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
 	/* save our data pointer in this interface device */
 	usb_set_intfdata(iface, dev);
 
+	INIT_WORK(&dev->work, atp_reinit);
+
 	return 0;
 
  err_free_buffer:
@@ -669,14 +703,17 @@ static void atp_disconnect(struct usb_interface *iface)
 static int atp_suspend(struct usb_interface *iface, pm_message_t message)
 {
 	struct atp *dev = usb_get_intfdata(iface);
+
 	usb_kill_urb(dev->urb);
 	dev->valid = 0;
+
 	return 0;
 }
 
 static int atp_resume(struct usb_interface *iface)
 {
 	struct atp *dev = usb_get_intfdata(iface);
+
 	if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
 		return -EIO;
 
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 1740cadd9594..91109b49fde1 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -109,7 +109,7 @@ static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse)
 {
 	struct lifebook_data *priv = psmouse->private;
 	struct input_dev *dev1 = psmouse->dev;
-	struct input_dev *dev2 = priv->dev2;
+	struct input_dev *dev2 = priv ? priv->dev2 : NULL;
 	unsigned char *packet = psmouse->packet;
 	int relative_packet = packet[0] & 0x08;
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 4fca1e7f2678..702a526cf45b 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -366,6 +366,7 @@ static void i8042_pnp_exit(void)
 static int __init i8042_pnp_init(void)
 {
 	char kbd_irq_str[4] = { 0 }, aux_irq_str[4] = { 0 };
+	int pnp_data_busted = 0;
 	int err;
 
 	if (i8042_nopnp) {
@@ -413,27 +414,48 @@ static int __init i8042_pnp_init(void)
 #endif
 
 	if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) &&
-	      i8042_pnp_data_reg != i8042_data_reg) || !i8042_pnp_data_reg) {
-		printk(KERN_WARNING "PNP: PS/2 controller has invalid data port %#x; using default %#x\n",
+	      i8042_pnp_data_reg != i8042_data_reg) ||
+	    !i8042_pnp_data_reg) {
+		printk(KERN_WARNING
+			"PNP: PS/2 controller has invalid data port %#x; "
+			"using default %#x\n",
 			i8042_pnp_data_reg, i8042_data_reg);
 		i8042_pnp_data_reg = i8042_data_reg;
+		pnp_data_busted = 1;
 	}
 
 	if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) &&
-	      i8042_pnp_command_reg != i8042_command_reg) || !i8042_pnp_command_reg) {
-		printk(KERN_WARNING "PNP: PS/2 controller has invalid command port %#x; using default %#x\n",
+	      i8042_pnp_command_reg != i8042_command_reg) ||
+	    !i8042_pnp_command_reg) {
+		printk(KERN_WARNING
+			"PNP: PS/2 controller has invalid command port %#x; "
+			"using default %#x\n",
 			i8042_pnp_command_reg, i8042_command_reg);
 		i8042_pnp_command_reg = i8042_command_reg;
+		pnp_data_busted = 1;
 	}
 
 	if (!i8042_nokbd && !i8042_pnp_kbd_irq) {
-		printk(KERN_WARNING "PNP: PS/2 controller doesn't have KBD irq; using default %d\n", i8042_kbd_irq);
+		printk(KERN_WARNING
+			"PNP: PS/2 controller doesn't have KBD irq; "
+			"using default %d\n", i8042_kbd_irq);
 		i8042_pnp_kbd_irq = i8042_kbd_irq;
+		pnp_data_busted = 1;
 	}
 
 	if (!i8042_noaux && !i8042_pnp_aux_irq) {
-		printk(KERN_WARNING "PNP: PS/2 controller doesn't have AUX irq; using default %d\n", i8042_aux_irq);
-		i8042_pnp_aux_irq = i8042_aux_irq;
+		if (!pnp_data_busted && i8042_pnp_kbd_irq) {
+			printk(KERN_WARNING
+				"PNP: PS/2 appears to have AUX port disabled, "
+				"if this is incorrect please boot with "
+				"i8042.nopnp\n");
+			i8042_noaux = 1;
+		} else {
+			printk(KERN_WARNING
+				"PNP: PS/2 controller doesn't have AUX irq; "
+				"using default %d\n", i8042_aux_irq);
+			i8042_pnp_aux_irq = i8042_aux_irq;
+		}
 	}
 
 	i8042_data_reg = i8042_pnp_data_reg;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 69371779806a..f929fcdbae2e 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -54,6 +54,19 @@ config TOUCHSCREEN_CORGI
 	  To compile this driver as a module, choose M here: the
 	  module will be called corgi_ts.
 
+config TOUCHSCREEN_FUJITSU
+	tristate "Fujitsu serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have the Fujitsu touchscreen (such as one
+	  installed in Lifebook P series laptop) connected to your
+	  system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fujitsu-ts.
+
 config TOUCHSCREEN_GUNZE
 	tristate "Gunze AHL-51S touchscreen"
 	select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 2f86d6ad06d3..5de8933c4993 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
+obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MTOUCH)	+= mtouch.o
 obj-$(CONFIG_TOUCHSCREEN_MK712)		+= mk712.o
 obj-$(CONFIG_TOUCHSCREEN_HP600)		+= hp680_ts_input.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 1c9069cd3bae..96581d08774f 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -95,7 +95,7 @@ struct ads7846 {
 	u16			dummy;		/* for the pwrdown read */
 	struct ts_event		tc;
 
-	struct spi_transfer	xfer[10];
+	struct spi_transfer	xfer[18];
 	struct spi_message	msg[5];
 	struct spi_message	*last_msg;
 	int			msg_idx;
@@ -107,6 +107,8 @@ struct ads7846 {
 	u16			debounce_tol;
 	u16			debounce_rep;
 
+	u16			penirq_recheck_delay_usecs;
+
 	spinlock_t		lock;
 	struct hrtimer		timer;
 	unsigned		pendown:1;	/* P: lock */
@@ -553,6 +555,15 @@ static void ads7846_rx(void *ads)
 		return;
 	}
 
+	/* Maybe check the pendown state before reporting. This discards
+	 * false readings when the pen is lifted.
+	 */
+	if (ts->penirq_recheck_delay_usecs) {
+		udelay(ts->penirq_recheck_delay_usecs);
+		if (!ts->get_pendown_state())
+			Rt = 0;
+	}
+
 	/* NOTE: We can't rely on the pressure to determine the pen down
 	 * state, even this controller has a pressure sensor.  The pressure
 	 * value can fluctuate for quite a while after lifting the pen and
@@ -896,6 +907,10 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		ts->filter = ads7846_no_filter;
 	ts->get_pendown_state = pdata->get_pendown_state;
 
+	if (pdata->penirq_recheck_delay_usecs)
+		ts->penirq_recheck_delay_usecs =
+				pdata->penirq_recheck_delay_usecs;
+
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
 
 	input_dev->name = "ADS784x Touchscreen";
@@ -936,6 +951,24 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	x->len = 2;
 	spi_message_add_tail(x, m);
 
+	/* the first sample after switching drivers can be low quality;
+	 * optionally discard it, using a second one after the signals
+	 * have had enough time to stabilize.
+	 */
+	if (pdata->settle_delay_usecs) {
+		x->delay_usecs = pdata->settle_delay_usecs;
+
+		x++;
+		x->tx_buf = &ts->read_y;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &ts->tc.y;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+	}
+
 	m->complete = ads7846_rx_val;
 	m->context = ts;
 
@@ -954,6 +987,21 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	x->len = 2;
 	spi_message_add_tail(x, m);
 
+	/* ... maybe discard first sample ... */
+	if (pdata->settle_delay_usecs) {
+		x->delay_usecs = pdata->settle_delay_usecs;
+
+		x++;
+		x->tx_buf = &ts->read_x;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &ts->tc.x;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+	}
+
 	m->complete = ads7846_rx_val;
 	m->context = ts;
 
@@ -973,6 +1021,21 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		x->len = 2;
 		spi_message_add_tail(x, m);
 
+		/* ... maybe discard first sample ... */
+		if (pdata->settle_delay_usecs) {
+			x->delay_usecs = pdata->settle_delay_usecs;
+
+			x++;
+			x->tx_buf = &ts->read_z1;
+			x->len = 1;
+			spi_message_add_tail(x, m);
+
+			x++;
+			x->rx_buf = &ts->tc.z1;
+			x->len = 2;
+			spi_message_add_tail(x, m);
+		}
+
 		m->complete = ads7846_rx_val;
 		m->context = ts;
 
@@ -990,6 +1053,21 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		x->len = 2;
 		spi_message_add_tail(x, m);
 
+		/* ... maybe discard first sample ... */
+		if (pdata->settle_delay_usecs) {
+			x->delay_usecs = pdata->settle_delay_usecs;
+
+			x++;
+			x->tx_buf = &ts->read_z2;
+			x->len = 1;
+			spi_message_add_tail(x, m);
+
+			x++;
+			x->rx_buf = &ts->tc.z2;
+			x->len = 2;
+			spi_message_add_tail(x, m);
+		}
+
 		m->complete = ads7846_rx_val;
 		m->context = ts;
 	}
diff --git a/drivers/input/touchscreen/fujitsu_ts.c b/drivers/input/touchscreen/fujitsu_ts.c
new file mode 100644
index 000000000000..daf7a4afc935
--- /dev/null
+++ b/drivers/input/touchscreen/fujitsu_ts.c
@@ -0,0 +1,189 @@
+/*
+ * Fujitsu serial touchscreen driver
+ *
+ * Copyright (c) Dmitry Torokhov <dtor@mail.ru>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Fujitsu serial touchscreen driver"
+
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define FUJITSU_LENGTH 5
+
+/*
+ * Per-touchscreen data.
+ */
+struct fujitsu {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[FUJITSU_LENGTH];
+	char phys[32];
+};
+
+/*
+ * Decode serial data (5 bytes per packet)
+ * First byte
+ * 1 C 0 0 R S S S
+ * Where C is 1 while in calibration mode (which we don't use)
+ * R is 1 when no coordinate corection was done.
+ * S are button state
+ */
+static irqreturn_t fujitsu_interrupt(struct serio *serio,
+				     unsigned char data, unsigned int flags)
+{
+	struct fujitsu *fujitsu = serio_get_drvdata(serio);
+	struct input_dev *dev = fujitsu->dev;
+
+	if (fujitsu->idx == 0) {
+		/* resync skip until start of frame */
+		if ((data & 0xf0) != 0x80)
+			return IRQ_HANDLED;
+	} else {
+		/* resync skip garbage */
+		if (data & 0x80) {
+			fujitsu->idx = 0;
+			return IRQ_HANDLED;
+		}
+	}
+
+	fujitsu->data[fujitsu->idx++] = data;
+	if (fujitsu->idx == FUJITSU_LENGTH) {
+		input_report_abs(dev, ABS_X,
+				 (fujitsu->data[2] << 7) | fujitsu->data[1]);
+		input_report_abs(dev, ABS_Y,
+				 (fujitsu->data[4] << 7) | fujitsu->data[3]);
+		input_report_key(dev, BTN_TOUCH,
+				 (fujitsu->data[0] & 0x03) != 2);
+		input_sync(dev);
+		fujitsu->idx = 0;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * fujitsu_disconnect() is the opposite of fujitsu_connect()
+ */
+static void fujitsu_disconnect(struct serio *serio)
+{
+	struct fujitsu *fujitsu = serio_get_drvdata(serio);
+
+	input_get_device(fujitsu->dev);
+	input_unregister_device(fujitsu->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(fujitsu->dev);
+	kfree(fujitsu);
+}
+
+/*
+ * fujitsu_connect() is the routine that is called when someone adds a
+ * new serio device that supports the Fujitsu protocol and registers it
+ * as input device.
+ */
+static int fujitsu_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct fujitsu *fujitsu;
+	struct input_dev *input_dev;
+	int err;
+
+	fujitsu = kzalloc(sizeof(struct fujitsu), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!fujitsu || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	fujitsu->serio = serio;
+	fujitsu->dev = input_dev;
+	snprintf(fujitsu->phys, sizeof(fujitsu->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Fujitsu Serial Touchscreen";
+	input_dev->phys = fujitsu->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_FUJITSU;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 4096, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 4096, 0, 0);
+	serio_set_drvdata(serio, fujitsu);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(fujitsu->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:
+	serio_close(serio);
+ fail2:
+	serio_set_drvdata(serio, NULL);
+ fail1:
+	input_free_device(input_dev);
+	kfree(fujitsu);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+static struct serio_device_id fujitsu_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_FUJITSU,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, fujitsu_serio_ids);
+
+static struct serio_driver fujitsu_drv = {
+	.driver		= {
+		.name	= "fujitsu_ts",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= fujitsu_serio_ids,
+	.interrupt	= fujitsu_interrupt,
+	.connect	= fujitsu_connect,
+	.disconnect	= fujitsu_disconnect,
+};
+
+static int __init fujitsu_init(void)
+{
+	return serio_register_driver(&fujitsu_drv);
+}
+
+static void __exit fujitsu_exit(void)
+{
+	serio_unregister_driver(&fujitsu_drv);
+}
+
+module_init(fujitsu_init);
+module_exit(fujitsu_exit);
diff --git a/include/linux/input.h b/include/linux/input.h
index 18c98b543030..e02c6a66b2ba 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -344,7 +344,8 @@ struct input_absinfo {
 #define KEY_BRIGHTNESSUP	225
 #define KEY_MEDIA		226
 
-#define KEY_SWITCHVIDEOMODE	227
+#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
+					   outputs (Monitor/LCD/TV-out/etc) */
 #define KEY_KBDILLUMTOGGLE	228
 #define KEY_KBDILLUMDOWN	229
 #define KEY_KBDILLUMUP		230
diff --git a/include/linux/serio.h b/include/linux/serio.h
index d9377ce9ffd1..9f3825014674 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -210,5 +210,6 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_TOUCHRIGHT	0x32
 #define SERIO_TOUCHWIN	0x33
 #define SERIO_TAOSEVM	0x34
+#define SERIO_FUJITSU	0x35
 
 #endif
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 3387e44dfd13..334d31411629 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -16,6 +16,20 @@ struct ads7846_platform_data {
 	u16	vref_delay_usecs;	/* 0 for external vref; etc */
 	int	keep_vref_on:1;		/* set to keep vref on for differential
 					 * measurements as well */
+
+	/* Settling time of the analog signals; a function of Vcc and the
+	 * capacitance on the X/Y drivers.  If set to non-zero, two samples
+	 * are taken with settle_delay us apart, and the second one is used.
+	 * ~150 uSec with 0.01uF caps.
+	 */
+	u16	settle_delay_usecs;
+
+	/* If set to non-zero, after samples are taken this delay is applied
+	 * and penirq is rechecked, to help avoid false events.  This value
+	 * is affected by the material used to build the touch layer.
+	 */
+	u16	penirq_recheck_delay_usecs;
+
 	u16	x_plate_ohms;
 	u16	y_plate_ohms;