Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

88 files changed, 8956 insertions, 1317 deletions

diff --git a/Documentation/devicetree/bindings/input/cros-ec-keyb.txt b/Documentation/devicetree/bindings/input/cros-ec-keyb.txt
new file mode 100644
index 000000000000..0f6355ce39b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cros-ec-keyb.txt
@@ -0,0 +1,72 @@
+ChromeOS EC Keyboard
+
+Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on
+a separate EC (Embedded Controller) device. It provides a message for reading
+key scans from the EC. These are then converted into keycodes for processing
+by the kernel.
+
+This binding is based on matrix-keymap.txt and extends/modifies it as follows:
+
+Required properties:
+- compatible: "google,cros-ec-keyb"
+
+Optional properties:
+- google,needs-ghost-filter: True to enable a ghost filter for the matrix
+keyboard. This is recommended if the EC does not have its own logic or
+hardware for this.
+
+
+Example:
+
+cros-ec-keyb {
+	compatible = "google,cros-ec-keyb";
+	keypad,num-rows = <8>;
+	keypad,num-columns = <13>;
+	google,needs-ghost-filter;
+	/*
+	 * Keymap entries take the form of 0xRRCCKKKK where
+	 * RR=Row CC=Column KKKK=Key Code
+	 * The values below are for a US keyboard layout and
+	 * are taken from the Linux driver. Note that the
+	 * 102ND key is not used for US keyboards.
+	 */
+	linux,keymap = <
+		/* CAPSLCK F1         B          F10     */
+		0x0001003a 0x0002003b 0x00030030 0x00040044
+		/* N       =          R_ALT      ESC     */
+		0x00060031 0x0008000d 0x000a0064 0x01010001
+		/* F4      G          F7         H       */
+		0x0102003e 0x01030022 0x01040041 0x01060023
+		/* '       F9         BKSPACE    L_CTRL  */
+		0x01080028 0x01090043 0x010b000e 0x0200001d
+		/* TAB     F3         T          F6      */
+		0x0201000f 0x0202003d 0x02030014 0x02040040
+		/* ]       Y          102ND      [       */
+		0x0205001b 0x02060015 0x02070056 0x0208001a
+		/* F8      GRAVE      F2         5       */
+		0x02090042 0x03010029 0x0302003c 0x03030006
+		/* F5      6          -          \       */
+		0x0304003f 0x03060007 0x0308000c 0x030b002b
+		/* R_CTRL  A          D          F       */
+		0x04000061 0x0401001e 0x04020020 0x04030021
+		/* S       K          J          ;       */
+		0x0404001f 0x04050025 0x04060024 0x04080027
+		/* L       ENTER      Z          C       */
+		0x04090026 0x040b001c 0x0501002c 0x0502002e
+		/* V       X          ,          M       */
+		0x0503002f 0x0504002d 0x05050033 0x05060032
+		/* L_SHIFT /          .          SPACE   */
+		0x0507002a 0x05080035 0x05090034 0x050B0039
+		/* 1       3          4          2       */
+		0x06010002 0x06020004 0x06030005 0x06040003
+		/* 8       7          0          9       */
+		0x06050009 0x06060008 0x0608000b 0x0609000a
+		/* L_ALT   DOWN       RIGHT      Q       */
+		0x060a0038 0x060b006c 0x060c006a 0x07010010
+		/* E       R          W          I       */
+		0x07020012 0x07030013 0x07040011 0x07050017
+		/* U       R_SHIFT    P          O       */
+		0x07060016 0x07070036 0x07080019 0x07090018
+		/* UP      LEFT    */
+		0x070b0067 0x070c0069>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt
new file mode 100644
index 000000000000..d98cf18c721c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/as3711.txt
@@ -0,0 +1,73 @@
+AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
+supplies, a battery charger and an RTC. So far only bindings for the two stepup
+DCDC converters are defined. Other DCDC and LDO supplies are configured, using
+standard regulator properties, they must belong to a sub-node, called
+"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
+configuration should be placed in a subnode, called "backlight."
+
+Compulsory properties:
+- compatible		: must be "ams,as3711"
+- reg			: specifies the I2C address
+
+To use the SU1 converter as a backlight source the following two properties must
+be provided:
+- su1-dev		: framebuffer phandle
+- su1-max-uA		: maximum current
+
+To use the SU2 converter as a backlight source the following two properties must
+be provided:
+- su2-dev		: framebuffer phandle
+- su1-max-uA		: maximum current
+
+Additionally one of these properties must be provided to select the type of
+feedback used:
+- su2-feedback-voltage	: voltage feedback is used
+- su2-feedback-curr1	: CURR1 input used for current feedback
+- su2-feedback-curr2	: CURR2 input used for current feedback
+- su2-feedback-curr3	: CURR3 input used for current feedback
+- su2-feedback-curr-auto: automatic current feedback selection
+
+and one of these to select the over-voltage protection pin
+- su2-fbprot-lx-sd4	: LX_SD4 is used for over-voltage protection
+- su2-fbprot-gpio2	: GPIO2 is used for over-voltage protection
+- su2-fbprot-gpio3	: GPIO3 is used for over-voltage protection
+- su2-fbprot-gpio4	: GPIO4 is used for over-voltage protection
+
+If "su2-feedback-curr-auto" is selected, one or more of the following properties
+have to be specified:
+- su2-auto-curr1	: use CURR1 input for current feedback
+- su2-auto-curr2	: use CURR2 input for current feedback
+- su2-auto-curr3	: use CURR3 input for current feedback
+
+Example:
+
+as3711@40 {
+	compatible = "ams,as3711";
+	reg = <0x40>;
+
+	regulators {
+		sd4 {
+			regulator-name = "1.215V";
+			regulator-min-microvolt = <1215000>;
+			regulator-max-microvolt = <1235000>;
+		};
+		ldo2 {
+			regulator-name = "2.8V CPU";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+
+	backlight {
+		compatible = "ams,as3711-bl";
+		su2-dev = <&lcdc>;
+		su2-max-uA = <36000>;
+		su2-feedback-curr-auto;
+		su2-fbprot-gpio4;
+		su2-auto-curr1;
+		su2-auto-curr2;
+		su2-auto-curr3;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
new file mode 100644
index 000000000000..e0e59c58a1f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -0,0 +1,56 @@
+ChromeOS Embedded Controller
+
+Google's ChromeOS EC is a Cortex-M device which talks to the AP and
+implements various function such as keyboard and battery charging.
+
+The EC can be connect through various means (I2C, SPI, LPC) and the
+compatible string used depends on the inteface. Each connection method has
+its own driver which connects to the top level interface-agnostic EC driver.
+Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
+the top-level driver.
+
+Required properties (I2C):
+- compatible: "google,cros-ec-i2c"
+- reg: I2C slave address
+
+Required properties (SPI):
+- compatible: "google,cros-ec-spi"
+- reg: SPI chip select
+
+Required properties (LPC):
+- compatible: "google,cros-ec-lpc"
+- reg: List of (IO address, size) pairs defining the interface uses
+
+
+Example for I2C:
+
+i2c@12CA0000 {
+	cros-ec@1e {
+		reg = <0x1e>;
+		compatible = "google,cros-ec-i2c";
+		interrupts = <14 0>;
+		interrupt-parent = <&wakeup_eint>;
+		wakeup-source;
+	};
+
+
+Example for SPI:
+
+spi@131b0000 {
+	ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0x0>;
+		interrupts = <14 0>;
+		interrupt-parent = <&wakeup_eint>;
+		wakeup-source;
+		spi-max-frequency = <5000000>;
+		controller-data {
+		cs-gpio = <&gpf0 3 4 3 0>;
+		samsung,spi-cs;
+		samsung,spi-feedback-delay = <2>;
+		};
+	};
+};
+
+
+Example for LPC is not supplied as it is not yet implemented.
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
new file mode 100644
index 000000000000..b381fa696bf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -0,0 +1,80 @@
+OMAP HS USB Host
+
+Required properties:
+
+- compatible: should be "ti,usbhs-host"
+- reg: should contain one register range i.e. start and length
+- ti,hwmods: must contain "usb_host_hs"
+
+Optional properties:
+
+- num-ports: number of USB ports. Usually this is automatically detected
+  from the IP's revision register but can be overridden by specifying
+  this property. A maximum of 3 ports are supported at the moment.
+
+- portN-mode: String specifying the port mode for port N, where N can be
+  from 1 to 3. If the port mode is not specified, that port is treated
+  as unused. When specified, it must be one of the following.
+	"ehci-phy",
+        "ehci-tll",
+        "ehci-hsic",
+        "ohci-phy-6pin-datse0",
+        "ohci-phy-6pin-dpdm",
+        "ohci-phy-3pin-datse0",
+        "ohci-phy-4pin-dpdm",
+        "ohci-tll-6pin-datse0",
+        "ohci-tll-6pin-dpdm",
+        "ohci-tll-3pin-datse0",
+        "ohci-tll-4pin-dpdm",
+        "ohci-tll-2pin-datse0",
+        "ohci-tll-2pin-dpdm",
+
+- single-ulpi-bypass: Must be present if the controller contains a single
+  ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
+
+Required properties if child node exists:
+
+- #address-cells: Must be 1
+- #size-cells: Must be 1
+- ranges: must be present
+
+Properties for children:
+
+The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
+See Documentation/devicetree/bindings/usb/omap-ehci.txt and
+omap3-ohci.txt
+
+Example for OMAP4:
+
+usbhshost: usbhshost@4a064000 {
+	compatible = "ti,usbhs-host";
+	reg = <0x4a064000 0x800>;
+	ti,hwmods = "usb_host_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	usbhsohci: ohci@4a064800 {
+		compatible = "ti,ohci-omap3", "usb-ohci";
+		reg = <0x4a064800 0x400>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 76 0x4>;
+	};
+
+	usbhsehci: ehci@4a064c00 {
+		compatible = "ti,ehci-omap", "usb-ehci";
+		reg = <0x4a064c00 0x400>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 77 0x4>;
+	};
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+	port2-mode = "ehci-tll";
+	port3-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
new file mode 100644
index 000000000000..62fe69724e3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
@@ -0,0 +1,17 @@
+OMAP HS USB Host TLL (Transceiver-Less Interface)
+
+Required properties:
+
+- compatible : should be "ti,usbhs-tll"
+- reg : should contain one register range i.e. start and length
+- interrupts : should contain the TLL module's interrupt
+- ti,hwmod : must contain "usb_tll_hs"
+
+Example:
+
+	usbhstll: usbhstll@4a062000 {
+		compatible = "ti,usbhs-tll";
+		reg = <0x4a062000 0x1000>;
+		interrupts = <78>;
+		ti,hwmods = "usb_tll_hs";
+	  };
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index 7a7eb1e7bda6..f2f3e80934d2 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -5,14 +5,70 @@ on the board).
 
 Required properties:
 
-  - compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958"
+  - compatible : One of "wlf,wm1811", "wlf,wm8994" or "wlf,wm8958".
 
   - reg : the I2C address of the device for I2C, the chip select
           number for SPI.
 
+  - gpio-controller : Indicates this device is a GPIO controller.
+  - #gpio-cells : Must be 2. The first cell is the pin number and the
+    second cell is used to specify optional parameters (currently unused).
+
+  - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
+    SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered
+    in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+
+  - interrupts : The interrupt line the IRQ signal for the device is
+    connected to.  This is optional, if it is not connected then none
+    of the interrupt related properties should be specified.
+  - interrupt-controller : These devices contain interrupt controllers
+    and may provide interrupt services to other devices if they have an
+    interrupt line connected.
+  - interrupt-parent : The parent interrupt controller.
+  - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+    The first cell is the IRQ number.
+    The second cell is the flags, encoded as the trigger masks from
+    Documentation/devicetree/bindings/interrupts.txt
+
+  - wlf,gpio-cfg : A list of GPIO configuration register values. If absent,
+    no configuration of these registers is performed. If any value is
+    over 0xffff then the register will be left as default. If present 11
+    values must be supplied.
+
+  - wlf,micbias-cfg : Two MICBIAS register values for WM1811 or
+    WM8958.  If absent the register defaults will be used.
+
+  - wlf,ldo1ena : GPIO specifier for control of LDO1ENA input to device.
+  - wlf,ldo2ena : GPIO specifier for control of LDO2ENA input to device.
+
+  - wlf,lineout1-se : If present LINEOUT1 is in single ended mode.
+  - wlf,lineout2-se : If present LINEOUT2 is in single ended mode.
+
+  - wlf,lineout1-feedback : If present LINEOUT1 has common mode feedback
+    connected.
+  - wlf,lineout2-feedback : If present LINEOUT2 has common mode feedback
+    connected.
+
+  - wlf,ldoena-always-driven : If present LDOENA is always driven.
+
 Example:
 
 codec: wm8994@1a {
 	compatible = "wlf,wm8994";
 	reg = <0x1a>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	lineout1-se;
+
+	AVDD2-supply = <&regulator>;
+	CPVDD-supply = <&regulator>;
+	DBVDD1-supply = <&regulator>;
+	DBVDD2-supply = <&regulator>;
+	DBVDD3-supply = <&regulator>;
+	SPKVDD1-supply = <&regulator>;
+	SPKVDD2-supply = <&regulator>;
 };
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index d58ad4ff8d34..2ebc97e16b91 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -466,8 +466,6 @@ config MACH_MX31ADS_WM1133_EV1
 	depends on MACH_MX31ADS
 	depends on MFD_WM8350_I2C
 	depends on REGULATOR_WM8350 = y
-	select MFD_WM8350_CONFIG_MODE_0
-	select MFD_WM8352_CONFIG_MODE_0
 	help
 	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
 	  and audio module for the MX31ADS platform.
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 283cb77d4721..20578536aec7 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -200,10 +200,7 @@ endchoice
 config SMDK6410_WM1190_EV1
 	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
 	depends on MACH_SMDK6410
-	select MFD_WM8350_CONFIG_MODE_0
-	select MFD_WM8350_CONFIG_MODE_3
 	select MFD_WM8350_I2C
-	select MFD_WM8352_CONFIG_MODE_0
 	select REGULATOR
 	select REGULATOR_WM8350
 	select SAMSUNG_GPIO_EXTRA64
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index a946b759fabd..7ccfef227c77 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -208,7 +208,7 @@ static const struct i2c_board_info wm1277_devs[] = {
 static struct arizona_pdata wm5102_reva_pdata = {
 	.ldoena = S3C64XX_GPN(7),
 	.gpio_base = CODEC_GPIO_BASE,
-	.irq_active_high = true,
+	.irq_flags = IRQF_TRIGGER_HIGH,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
 	.micd_rate = 6,
 	.gpio_defaults = {
@@ -238,7 +238,7 @@ static struct spi_board_info wm5102_reva_spi_devs[] = {
 static struct arizona_pdata wm5102_pdata = {
 	.ldoena = S3C64XX_GPN(7),
 	.gpio_base = CODEC_GPIO_BASE,
-	.irq_active_high = true,
+	.irq_flags = IRQF_TRIGGER_HIGH,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 2,
 	.gpio_defaults = {
 		[2] = 0x10000, /* AIF3TXLRCLK */
diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c
index 26405efe0f9f..6d0feb234d3c 100644
--- a/drivers/gpio/gpio-ucb1400.c
+++ b/drivers/gpio/gpio-ucb1400.c
@@ -12,8 +12,6 @@
 #include <linux/module.h>
 #include <linux/ucb1400.h>
 
-struct ucb1400_gpio_data *ucbdata;
-
 static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
 {
 	struct ucb1400_gpio *gpio;
@@ -50,7 +48,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
 	struct ucb1400_gpio *ucb = dev->dev.platform_data;
 	int err = 0;
 
-	if (!(ucbdata && ucbdata->gpio_offset)) {
+	if (!(ucb && ucb->gpio_offset)) {
 		err = -EINVAL;
 		goto err;
 	}
@@ -58,7 +56,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, ucb);
 
 	ucb->gc.label = "ucb1400_gpio";
-	ucb->gc.base = ucbdata->gpio_offset;
+	ucb->gc.base = ucb->gpio_offset;
 	ucb->gc.ngpio = 10;
 	ucb->gc.owner = THIS_MODULE;
 
@@ -72,8 +70,8 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
 	if (err)
 		goto err;
 
-	if (ucbdata && ucbdata->gpio_setup)
-		err = ucbdata->gpio_setup(&dev->dev, ucb->gc.ngpio);
+	if (ucb && ucb->gpio_setup)
+		err = ucb->gpio_setup(&dev->dev, ucb->gc.ngpio);
 
 err:
 	return err;
@@ -85,8 +83,8 @@ static int ucb1400_gpio_remove(struct platform_device *dev)
 	int err = 0;
 	struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
 
-	if (ucbdata && ucbdata->gpio_teardown) {
-		err = ucbdata->gpio_teardown(&dev->dev, ucb->gc.ngpio);
+	if (ucb && ucb->gpio_teardown) {
+		err = ucb->gpio_teardown(&dev->dev, ucb->gc.ngpio);
 		if (err)
 			return err;
 	}
@@ -103,11 +101,6 @@ static struct platform_driver ucb1400_gpio_driver = {
 	},
 };
 
-void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
-{
-	ucbdata = data;
-}
-
 module_platform_driver(ucb1400_gpio_driver);
 
 MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ac0500667000..6a195d5e90ff 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -628,4 +628,16 @@ config KEYBOARD_W90P910
 	  To compile this driver as a module, choose M here: the
 	  module will be called w90p910_keypad.
 
+config KEYBOARD_CROS_EC
+	tristate "ChromeOS EC keyboard"
+	select INPUT_MATRIXKMAP
+	depends on MFD_CROS_EC
+	help
+	  Say Y here to enable the matrix keyboard used by ChromeOS devices
+	  and implemented on the ChromeOS EC. You must enable one bus option
+	  (MFD_CROS_EC_I2C or MFD_CROS_EC_SPI) to use this.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_keyb.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 49b16453d00e..0c43e8cf8d0e 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
+obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
 obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS)	+= goldfish_events.o
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
new file mode 100644
index 000000000000..49557f27bfa6
--- /dev/null
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -0,0 +1,334 @@
+/*
+ * ChromeOS EC keyboard driver
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the Chrome OS EC byte-level message-based protocol for
+ * communicating the keyboard state (which keys are pressed) from a keyboard EC
+ * to the AP over some bus (such as i2c, lpc, spi).  The EC does debouncing,
+ * but everything else (including deghosting) is done here.  The main
+ * motivation for this is to keep the EC firmware as simple as possible, since
+ * it cannot be easily upgraded and EC flash/IRAM space is relatively
+ * expensive.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+
+/*
+ * @rows: Number of rows in the keypad
+ * @cols: Number of columns in the keypad
+ * @row_shift: log2 or number of rows, rounded up
+ * @keymap_data: Matrix keymap data used to convert to keyscan values
+ * @ghost_filter: true to enable the matrix key-ghosting filter
+ * @dev: Device pointer
+ * @idev: Input device
+ * @ec: Top level ChromeOS device to use to talk to EC
+ * @event_notifier: interrupt event notifier for transport devices
+ */
+struct cros_ec_keyb {
+	unsigned int rows;
+	unsigned int cols;
+	int row_shift;
+	const struct matrix_keymap_data *keymap_data;
+	bool ghost_filter;
+
+	struct device *dev;
+	struct input_dev *idev;
+	struct cros_ec_device *ec;
+	struct notifier_block notifier;
+};
+
+
+static bool cros_ec_keyb_row_has_ghosting(struct cros_ec_keyb *ckdev,
+					  uint8_t *buf, int row)
+{
+	int pressed_in_row = 0;
+	int row_has_teeth = 0;
+	int col, mask;
+
+	mask = 1 << row;
+	for (col = 0; col < ckdev->cols; col++) {
+		if (buf[col] & mask) {
+			pressed_in_row++;
+			row_has_teeth |= buf[col] & ~mask;
+			if (pressed_in_row > 1 && row_has_teeth) {
+				/* ghosting */
+				dev_dbg(ckdev->dev,
+					"ghost found at: r%d c%d, pressed %d, teeth 0x%x\n",
+					row, col, pressed_in_row,
+					row_has_teeth);
+				return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+/*
+ * Returns true when there is at least one combination of pressed keys that
+ * results in ghosting.
+ */
+static bool cros_ec_keyb_has_ghosting(struct cros_ec_keyb *ckdev, uint8_t *buf)
+{
+	int row;
+
+	/*
+	 * Ghosting happens if for any pressed key X there are other keys
+	 * pressed both in the same row and column of X as, for instance,
+	 * in the following diagram:
+	 *
+	 * . . Y . g .
+	 * . . . . . .
+	 * . . . . . .
+	 * . . X . Z .
+	 *
+	 * In this case only X, Y, and Z are pressed, but g appears to be
+	 * pressed too (see Wikipedia).
+	 *
+	 * We can detect ghosting in a single pass (*) over the keyboard state
+	 * by maintaining two arrays.  pressed_in_row counts how many pressed
+	 * keys we have found in a row.  row_has_teeth is true if any of the
+	 * pressed keys for this row has other pressed keys in its column.  If
+	 * at any point of the scan we find that a row has multiple pressed
+	 * keys, and at least one of them is at the intersection with a column
+	 * with multiple pressed keys, we're sure there is ghosting.
+	 * Conversely, if there is ghosting, we will detect such situation for
+	 * at least one key during the pass.
+	 *
+	 * (*) This looks linear in the number of keys, but it's not.  We can
+	 * cheat because the number of rows is small.
+	 */
+	for (row = 0; row < ckdev->rows; row++)
+		if (cros_ec_keyb_row_has_ghosting(ckdev, buf, row))
+			return true;
+
+	return false;
+}
+
+/*
+ * Compares the new keyboard state to the old one and produces key
+ * press/release events accordingly.  The keyboard state is 13 bytes (one byte
+ * per column)
+ */
+static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
+			 uint8_t *kb_state, int len)
+{
+	struct input_dev *idev = ckdev->idev;
+	int col, row;
+	int new_state;
+	int num_cols;
+
+	num_cols = len;
+
+	if (ckdev->ghost_filter && cros_ec_keyb_has_ghosting(ckdev, kb_state)) {
+		/*
+		 * Simple-minded solution: ignore this state. The obvious
+		 * improvement is to only ignore changes to keys involved in
+		 * the ghosting, but process the other changes.
+		 */
+		dev_dbg(ckdev->dev, "ghosting found\n");
+		return;
+	}
+
+	for (col = 0; col < ckdev->cols; col++) {
+		for (row = 0; row < ckdev->rows; row++) {
+			int pos = MATRIX_SCAN_CODE(row, col, ckdev->row_shift);
+			const unsigned short *keycodes = idev->keycode;
+			int code;
+
+			code = keycodes[pos];
+			new_state = kb_state[col] & (1 << row);
+			if (!!new_state != test_bit(code, idev->key)) {
+				dev_dbg(ckdev->dev,
+					"changed: [r%d c%d]: byte %02x\n",
+					row, col, new_state);
+
+				input_report_key(idev, code, new_state);
+			}
+		}
+	}
+	input_sync(ckdev->idev);
+}
+
+static int cros_ec_keyb_open(struct input_dev *dev)
+{
+	struct cros_ec_keyb *ckdev = input_get_drvdata(dev);
+
+	return blocking_notifier_chain_register(&ckdev->ec->event_notifier,
+						&ckdev->notifier);
+}
+
+static void cros_ec_keyb_close(struct input_dev *dev)
+{
+	struct cros_ec_keyb *ckdev = input_get_drvdata(dev);
+
+	blocking_notifier_chain_unregister(&ckdev->ec->event_notifier,
+					   &ckdev->notifier);
+}
+
+static int cros_ec_keyb_get_state(struct cros_ec_keyb *ckdev, uint8_t *kb_state)
+{
+	return ckdev->ec->command_recv(ckdev->ec, EC_CMD_MKBP_STATE,
+					  kb_state, ckdev->cols);
+}
+
+static int cros_ec_keyb_work(struct notifier_block *nb,
+		     unsigned long state, void *_notify)
+{
+	int ret;
+	struct cros_ec_keyb *ckdev = container_of(nb, struct cros_ec_keyb,
+						    notifier);
+	uint8_t kb_state[ckdev->cols];
+
+	ret = cros_ec_keyb_get_state(ckdev, kb_state);
+	if (ret >= 0)
+		cros_ec_keyb_process(ckdev, kb_state, ret);
+
+	return NOTIFY_DONE;
+}
+
+/* Clear any keys in the buffer */
+static void cros_ec_keyb_clear_keyboard(struct cros_ec_keyb *ckdev)
+{
+	uint8_t old_state[ckdev->cols];
+	uint8_t new_state[ckdev->cols];
+	unsigned long duration;
+	int i, ret;
+
+	/*
+	 * Keep reading until we see that the scan state does not change.
+	 * That indicates that we are done.
+	 *
+	 * Assume that the EC keyscan buffer is at most 32 deep.
+	 */
+	duration = jiffies;
+	ret = cros_ec_keyb_get_state(ckdev, new_state);
+	for (i = 1; !ret && i < 32; i++) {
+		memcpy(old_state, new_state, sizeof(old_state));
+		ret = cros_ec_keyb_get_state(ckdev, new_state);
+		if (0 == memcmp(old_state, new_state, sizeof(old_state)))
+			break;
+	}
+	duration = jiffies - duration;
+	dev_info(ckdev->dev, "Discarded %d keyscan(s) in %dus\n", i,
+		jiffies_to_usecs(duration));
+}
+
+static int cros_ec_keyb_probe(struct platform_device *pdev)
+{
+	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = ec->dev;
+	struct cros_ec_keyb *ckdev;
+	struct input_dev *idev;
+	struct device_node *np;
+	int err;
+
+	np = pdev->dev.of_node;
+	if (!np)
+		return -ENODEV;
+
+	ckdev = devm_kzalloc(&pdev->dev, sizeof(*ckdev), GFP_KERNEL);
+	if (!ckdev)
+		return -ENOMEM;
+	err = matrix_keypad_parse_of_params(&pdev->dev, &ckdev->rows,
+					    &ckdev->cols);
+	if (err)
+		return err;
+
+	idev = devm_input_allocate_device(&pdev->dev);
+	if (!idev)
+		return -ENOMEM;
+
+	ckdev->ec = ec;
+	ckdev->notifier.notifier_call = cros_ec_keyb_work;
+	ckdev->dev = dev;
+	dev_set_drvdata(&pdev->dev, ckdev);
+
+	idev->name = ec->ec_name;
+	idev->phys = ec->phys_name;
+	__set_bit(EV_REP, idev->evbit);
+
+	idev->id.bustype = BUS_VIRTUAL;
+	idev->id.version = 1;
+	idev->id.product = 0;
+	idev->dev.parent = &pdev->dev;
+	idev->open = cros_ec_keyb_open;
+	idev->close = cros_ec_keyb_close;
+
+	ckdev->ghost_filter = of_property_read_bool(np,
+					"google,needs-ghost-filter");
+
+	err = matrix_keypad_build_keymap(NULL, NULL, ckdev->rows, ckdev->cols,
+					 NULL, idev);
+	if (err) {
+		dev_err(dev, "cannot build key matrix\n");
+		return err;
+	}
+
+	ckdev->row_shift = get_count_order(ckdev->cols);
+
+	input_set_capability(idev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(idev, ckdev);
+	ckdev->idev = idev;
+	err = input_register_device(ckdev->idev);
+	if (err) {
+		dev_err(dev, "cannot register input device\n");
+		return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_ec_keyb_resume(struct device *dev)
+{
+	struct cros_ec_keyb *ckdev = dev_get_drvdata(dev);
+
+	/*
+	 * When the EC is not a wake source, then it could not have caused the
+	 * resume, so we clear the EC's key scan buffer. If the EC was a
+	 * wake source (e.g. the lid is open and the user might press a key to
+	 * wake) then the key scan buffer should be preserved.
+	 */
+	if (ckdev->ec->was_wake_device)
+		cros_ec_keyb_clear_keyboard(ckdev);
+
+	return 0;
+}
+
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume);
+
+static struct platform_driver cros_ec_keyb_driver = {
+	.probe = cros_ec_keyb_probe,
+	.driver = {
+		.name = "cros-ec-keyb",
+		.pm	= &cros_ec_keyb_pm_ops,
+	},
+};
+
+module_platform_driver(cros_ec_keyb_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC keyboard driver");
+MODULE_ALIAS("platform:cros-ec-keyb");
diff --git a/drivers/input/keyboard/lpc32xx-keys.c b/drivers/input/keyboard/lpc32xx-keys.c
index 1b8add6cfb9d..42181435fe67 100644
--- a/drivers/input/keyboard/lpc32xx-keys.c
+++ b/drivers/input/keyboard/lpc32xx-keys.c
@@ -144,12 +144,13 @@ static int lpc32xx_parse_dt(struct device *dev,
 {
 	struct device_node *np = dev->of_node;
 	u32 rows = 0, columns = 0;
+	int err;
 
-	of_property_read_u32(np, "keypad,num-rows", &rows);
-	of_property_read_u32(np, "keypad,num-columns", &columns);
-	if (!rows || rows != columns) {
-		dev_err(dev,
-			"rows and columns must be specified and be equal!\n");
+	err = matrix_keypad_parse_of_params(dev, &rows, &columns);
+	if (err)
+		return err;
+	if (rows != columns) {
+		dev_err(dev, "rows and columns must be equal!\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index e25b022692cd..1b289092f4e3 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -215,18 +215,12 @@ static int omap4_keypad_parse_dt(struct device *dev,
 				 struct omap4_keypad *keypad_data)
 {
 	struct device_node *np = dev->of_node;
+	int err;
 
-	if (!np) {
-		dev_err(dev, "missing DT data");
-		return -EINVAL;
-	}
-
-	of_property_read_u32(np, "keypad,num-rows", &keypad_data->rows);
-	of_property_read_u32(np, "keypad,num-columns", &keypad_data->cols);
-	if (!keypad_data->rows || !keypad_data->cols) {
-		dev_err(dev, "number of keypad rows/columns not specified\n");
-		return -EINVAL;
-	}
+	err = matrix_keypad_parse_of_params(dev, &keypad_data->rows,
+					    &keypad_data->cols);
+	if (err)
+		return err;
 
 	if (of_get_property(np, "linux,input-no-autorepeat", NULL))
 		keypad_data->no_autorepeat = true;
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index a34cc6714e5b..55c15304ddbc 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -288,8 +288,11 @@ static int tca8418_keypad_probe(struct i2c_client *client,
 		irq_is_gpio = pdata->irq_is_gpio;
 	} else {
 		struct device_node *np = dev->of_node;
-		of_property_read_u32(np, "keypad,num-rows", &rows);
-		of_property_read_u32(np, "keypad,num-columns", &cols);
+		int err;
+
+		err = matrix_keypad_parse_of_params(dev, &rows, &cols);
+		if (err)
+			return err;
 		rep = of_property_read_bool(np, "keypad,autorepeat");
 	}
 
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
index 3ae496ea5fe6..08b61f506db6 100644
--- a/drivers/input/matrix-keymap.c
+++ b/drivers/input/matrix-keymap.c
@@ -50,6 +50,26 @@ static bool matrix_keypad_map_key(struct input_dev *input_dev,
 }
 
 #ifdef CONFIG_OF
+int matrix_keypad_parse_of_params(struct device *dev,
+				  unsigned int *rows, unsigned int *cols)
+{
+	struct device_node *np = dev->of_node;
+
+	if (!np) {
+		dev_err(dev, "missing DT data");
+		return -EINVAL;
+	}
+	of_property_read_u32(np, "keypad,num-rows", rows);
+	of_property_read_u32(np, "keypad,num-columns", cols);
+	if (!*rows || !*cols) {
+		dev_err(dev, "number of keypad rows/columns not specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(matrix_keypad_parse_of_params);
+
 static int matrix_keypad_parse_of_keymap(const char *propname,
 					 unsigned int rows, unsigned int cols,
 					 struct input_dev *input_dev)
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 893fc1ba6ead..31ca55548ef9 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -1144,17 +1144,15 @@ static int pm860x_probe(struct i2c_client *client,
 			return -ENOMEM;
 		ret = pm860x_dt_init(node, &client->dev, pdata);
 		if (ret)
-			goto err;
+			return ret;
 	} else if (!pdata) {
 		pr_info("No platform data in %s!\n", __func__);
 		return -EINVAL;
 	}
 
 	chip = kzalloc(sizeof(struct pm860x_chip), GFP_KERNEL);
-	if (chip == NULL) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (chip == NULL)
+		return -ENOMEM;
 
 	chip->id = verify_addr(client);
 	chip->regmap = regmap_init_i2c(client, &pm860x_regmap_config);
@@ -1194,10 +1192,6 @@ static int pm860x_probe(struct i2c_client *client,
 
 	pm860x_device_init(chip, pdata);
 	return 0;
-err:
-	if (node)
-		devm_kfree(&client->dev, pdata);
-	return ret;
 }
 
 static int pm860x_remove(struct i2c_client *client)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ca86581d02ce..d9aed1593e5d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -10,19 +10,240 @@ config MFD_CORE
 	select IRQ_DOMAIN
 	default n
 
-config MFD_88PM860X
-	bool "Support Marvell 88PM8606/88PM8607"
+config MFD_CS5535
+	tristate "AMD CS5535 and CS5536 southbridge core functions"
+	select MFD_CORE
+	depends on PCI && X86
+	---help---
+	  This is the core driver for CS5535/CS5536 MFD functions.  This is
+          necessary for using the board's GPIO and MFGPT functionality.
+
+config MFD_AS3711
+	bool "AMS AS3711"
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
 	depends on I2C=y && GENERIC_HARDIRQS
+	help
+	  Support for the AS3711 PMIC from AMS
+
+config PMIC_ADP5520
+	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
+	depends on I2C=y
+	help
+	  Say yes here to add support for Analog Devices AD5520 and ADP5501,
+	  Multifunction Power Management IC. This includes
+	  the I2C driver and the core APIs _only_, you have to select
+	  individual components like LCD backlight, LEDs, GPIOs and Kepad
+	  under the corresponding menus.
+
+config MFD_AAT2870_CORE
+	bool "AnalogicTech AAT2870"
+	select MFD_CORE
+	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+	help
+	  If you say yes here you get support for the AAT2870.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
+config MFD_CROS_EC
+	tristate "ChromeOS Embedded Controller"
+	select MFD_CORE
+	help
+	  If you say Y here you get support for the ChromeOS Embedded
+	  Controller (EC) providing keyboard, battery and power services.
+	  You also ned to enable the driver for the bus you are using. The
+	  protocol for talking to the EC is defined by the bus driver.
+
+config MFD_CROS_EC_I2C
+	tristate "ChromeOS Embedded Controller (I2C)"
+	depends on MFD_CROS_EC && I2C
+
+	help
+	  If you say Y here, you get support for talking to the ChromeOS
+	  EC through an I2C bus. This uses a simple byte-level protocol with
+	  a checksum. Failing accesses will be retried three times to
+	  improve reliability.
+
+config MFD_CROS_EC_SPI
+	tristate "ChromeOS Embedded Controller (SPI)"
+	depends on MFD_CROS_EC && SPI
+
+	---help---
+	  If you say Y here, you get support for talking to the ChromeOS EC
+	  through a SPI bus, using a byte-level protocol. Since the EC's
+	  response time cannot be guaranteed, we support ignoring
+	  'pre-amble' bytes before the response actually starts.
+
+config MFD_ASIC3
+	bool "Compaq ASIC3"
+	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+	select MFD_CORE
+	 ---help---
+	  This driver supports the ASIC3 multifunction chip found on many
+	  PDAs (mainly iPAQ and HTC based ones)
+
+config PMIC_DA903X
+	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
+	depends on I2C=y
+	help
+	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
+	  usually found on PXA processors-based platforms. This includes
+	  the I2C driver and the core APIs _only_, you have to select
+	  individual components like LCD backlight, voltage regulators,
+	  LEDs and battery-charger under the corresponding menus.
+
+config PMIC_DA9052
+	bool
+	select MFD_CORE
+
+config MFD_DA9052_SPI
+	bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
+	select REGMAP_SPI
+	select REGMAP_IRQ
+	select PMIC_DA9052
+	depends on SPI_MASTER=y && GENERIC_HARDIRQS
+	help
+	  Support for the Dialog Semiconductor DA9052 PMIC
+	  when controlled using SPI. This driver provides common support
+	  for accessing the device, additional drivers must be enabled in
+	  order to use the functionality of the device.
+
+config MFD_DA9052_I2C
+	bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
 	select REGMAP_I2C
+	select REGMAP_IRQ
+	select PMIC_DA9052
+	depends on I2C=y && GENERIC_HARDIRQS
+	help
+	  Support for the Dialog Semiconductor DA9052 PMIC
+	  when controlled using I2C. This driver provides common support
+	  for accessing the device, additional drivers must be enabled in
+	  order to use the functionality of the device.
+
+config MFD_DA9055
+	bool "Dialog Semiconductor DA9055 PMIC Support"
+	select REGMAP_I2C
+	select REGMAP_IRQ
 	select MFD_CORE
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
-	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
-	  This includes the I2C driver and the core APIs _only_, you have to
-	  select individual components like voltage regulators, RTC and
-	  battery-charger under the corresponding menus.
+	  Say yes here for support of Dialog Semiconductor DA9055. This is
+	  a Power Management IC. This driver provides common support for
+	  accessing the device as well as the I2C interface to the chip itself.
+	  Additional drivers must be enabled in order to use the functionality
+	  of the device.
+
+	  This driver can be built as a module. If built as a module it will be
+	  called "da9055"
+
+config MFD_MC13783
+	tristate
+
+config MFD_MC13XXX
+	tristate
+	depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
+	select MFD_CORE
+	select MFD_MC13783
+	help
+	  Enable support for the Freescale MC13783 and MC13892 PMICs.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
+config MFD_MC13XXX_SPI
+	tristate "Freescale MC13783 and MC13892 SPI interface"
+	depends on SPI_MASTER && GENERIC_HARDIRQS
+	select REGMAP_SPI
+	select MFD_MC13XXX
+	help
+	  Select this if your MC13xxx is connected via an SPI bus.
+
+config MFD_MC13XXX_I2C
+	tristate "Freescale MC13892 I2C interface"
+	depends on I2C && GENERIC_HARDIRQS
+	select REGMAP_I2C
+	select MFD_MC13XXX
+	help
+	  Select this if your MC13xxx is connected via an I2C bus.
+
+config HTC_EGPIO
+	bool "HTC EGPIO support"
+	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+	help
+	    This driver supports the CPLD egpio chip present on
+	    several HTC phones.  It provides basic support for input
+	    pins, output pins, and irqs.
+
+config HTC_PASIC3
+	tristate "HTC PASIC3 LED/DS1WM chip support"
+	select MFD_CORE
+	depends on GENERIC_HARDIRQS
+	help
+	  This core driver provides register access for the LED/DS1WM
+	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
+	  HTC Magician devices, respectively. Actual functionality is
+	  handled by the leds-pasic3 and ds1wm drivers.
+
+config HTC_I2CPLD
+	bool "HTC I2C PLD chip support"
+	depends on I2C=y && GPIOLIB
+	help
+	  If you say yes here you get support for the supposed CPLD
+	  found on omap850 HTC devices like the HTC Wizard and HTC Herald.
+	  This device provides input and output GPIOs through an I2C
+	  interface to one or more sub-chips.
+
+config LPC_ICH
+	tristate "Intel ICH LPC"
+	depends on PCI && GENERIC_HARDIRQS
+	select MFD_CORE
+	help
+	  The LPC bridge function of the Intel ICH provides support for
+	  many functional units. This driver provides needed support for
+	  other drivers to control these functions, currently GPIO and
+	  watchdog.
+
+config LPC_SCH
+	tristate "Intel SCH LPC"
+	depends on PCI && GENERIC_HARDIRQS
+	select MFD_CORE
+	help
+	  LPC bridge function of the Intel SCH provides support for
+	  System Management Bus and General Purpose I/O.
+
+config MFD_INTEL_MSIC
+	bool "Intel MSIC"
+	depends on INTEL_SCU_IPC
+	select MFD_CORE
+	help
+	  Select this option to enable access to Intel MSIC (Avatele
+	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
+	  devices used in Intel Medfield platforms.
+
+config MFD_JANZ_CMODIO
+	tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
+	select MFD_CORE
+	depends on PCI && GENERIC_HARDIRQS
+	help
+	  This is the core driver for the Janz CMOD-IO PCI MODULbus
+	  carrier board. This device is a PCI to MODULbus bridge which may
+	  host many different types of MODULbus daughterboards, including
+	  CAN and GPIO controllers.
+
+config MFD_JZ4740_ADC
+	bool "Janz JZ4740 ADC core"
+	select MFD_CORE
+	select GENERIC_IRQ_CHIP
+	depends on MACH_JZ4740
+	help
+	  Say yes here if you want support for the ADC unit in the JZ4740 SoC.
+	  This driver is necessary for jz4740-battery and jz4740-hwmon driver.
 
 config MFD_88PM800
-	tristate "Support Marvell 88PM800"
+	tristate "Marvell 88PM800"
 	depends on I2C=y && GENERIC_HARDIRQS
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -34,7 +255,7 @@ config MFD_88PM800
 	  battery-charger under the corresponding menus.
 
 config MFD_88PM805
-	tristate "Support Marvell 88PM805"
+	tristate "Marvell 88PM805"
 	depends on I2C=y && GENERIC_HARDIRQS
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -45,8 +266,242 @@ config MFD_88PM805
 	  components like codec device, headset/Mic device under the
 	  corresponding menus.
 
+config MFD_88PM860X
+	bool "Marvell 88PM8606/88PM8607"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select REGMAP_I2C
+	select MFD_CORE
+	help
+	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
+	  This includes the I2C driver and the core APIs _only_, you have to
+	  select individual components like voltage regulators, RTC and
+	  battery-charger under the corresponding menus.
+
+config MFD_MAX77686
+	bool "Maxim Semiconductor MAX77686 PMIC Support"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	select IRQ_DOMAIN
+	help
+	  Say yes here to support for Maxim Semiconductor MAX77686.
+	  This is a Power Management IC with RTC on chip.
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
+config MFD_MAX77693
+	bool "Maxim Semiconductor MAX77693 PMIC Support"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say yes here to support for Maxim Semiconductor MAX77693.
+	  This is a companion Power Management IC with Flash, Haptic, Charger,
+	  and MUIC(Micro USB Interface Controller) controls on chip.
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
+config MFD_MAX8907
+	tristate "Maxim Semiconductor MAX8907 PMIC Support"
+	select MFD_CORE
+	depends on I2C=y && GENERIC_HARDIRQS
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  Say yes here to support for Maxim Semiconductor MAX8907. This is
+	  a Power Management IC. This driver provides common support for
+	  accessing the device; additional drivers must be enabled in order
+	  to use the functionality of the device.
+
+config MFD_MAX8925
+	bool "Maxim Semiconductor MAX8925 PMIC Support"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	help
+	  Say yes here to support for Maxim Semiconductor MAX8925. This is
+	  a Power Management IC. This driver provides common support for
+	  accessing the device, additional drivers must be enabled in order
+	  to use the functionality of the device.
+
+config MFD_MAX8997
+	bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select IRQ_DOMAIN
+	help
+	  Say yes here to support for Maxim Semiconductor MAX8997/8966.
+	  This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
+	  MUIC controls on chip.
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
+config MFD_MAX8998
+	bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	help
+	  Say yes here to support for Maxim Semiconductor MAX8998 and
+	  National Semiconductor LP3974. This is a Power Management IC.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
+config EZX_PCAP
+	bool "Motorola EZXPCAP Support"
+	depends on GENERIC_HARDIRQS && SPI_MASTER
+	help
+	  This enables the PCAP ASIC present on EZX Phones. This is
+	  needed for MMC, TouchScreen, Sound, USB, etc..
+
+config MFD_VIPERBOARD
+        tristate "Nano River Technologies Viperboard"
+	select MFD_CORE
+	depends on USB && GENERIC_HARDIRQS
+	default n
+	help
+	  Say yes here if you want support for Nano River Technologies
+	  Viperboard.
+	  There are mfd cell drivers available for i2c master, adc and
+	  both gpios found on the board. The spi part does not yet
+	  have a driver.
+	  You need to select the mfd cell drivers separately.
+	  The drivers do not support all features the board exposes.
+
+config MFD_RETU
+	tristate "Nokia Retu and Tahvo multi-function device"
+	select MFD_CORE
+	depends on I2C && GENERIC_HARDIRQS
+	select REGMAP_IRQ
+	help
+	  Retu and Tahvo are a multi-function devices found on Nokia
+	  Internet Tablets (770, N800 and N810).
+
+config MFD_PCF50633
+	tristate "NXP PCF50633"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say yes here if you have NXP PCF50633 chip on your board.
+	  This core driver provides register access and IRQ handling
+	  facilities, and registers devices for the various functions
+	  so that function-specific drivers can bind to them.
+
+config PCF50633_ADC
+	tristate "NXP PCF50633 ADC"
+	depends on MFD_PCF50633
+	help
+	 Say yes here if you want to include support for ADC in the
+	 NXP PCF50633 chip.
+
+config PCF50633_GPIO
+	tristate "NXP PCF50633 GPIO"
+	depends on MFD_PCF50633
+	help
+	 Say yes here if you want to include support GPIO for pins on
+	 the PCF50633 chip.
+
+config UCB1400_CORE
+	tristate "Philips UCB1400 Core driver"
+	depends on AC97_BUS
+	depends on GPIOLIB
+	help
+	  This enables support for the Philips UCB1400 core functions.
+	  The UCB1400 is an AC97 audio codec.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ucb1400_core.
+
+config MFD_PM8XXX
+	tristate
+
+config MFD_PM8921_CORE
+	tristate "Qualcomm PM8921 PMIC chip"
+	depends on SSBI && BROKEN
+	select MFD_CORE
+	select MFD_PM8XXX
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in PM8921 PMIC chip.
+
+	  This is required if your board has a PM8921 and uses its features,
+	  such as: MPPs, GPIOs, regulators, interrupts, and PWM.
+
+	  Say M here if you want to include support for PM8921 chip as a module.
+	  This will build a module called "pm8921-core".
+
+config MFD_PM8XXX_IRQ
+	bool "Qualcomm PM8xxx IRQ features"
+	depends on MFD_PM8XXX
+	default y if MFD_PM8XXX
+	help
+	  This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
+
+	  This is required to use certain other PM 8xxx features, such as GPIO
+	  and MPP.
+
+config MFD_RDC321X
+	tristate "RDC R-321x southbridge"
+	select MFD_CORE
+	depends on PCI && GENERIC_HARDIRQS
+	help
+	  Say yes here if you want to have support for the RDC R-321x SoC
+	  southbridge which provides access to GPIOs and Watchdog using the
+	  southbridge PCI device configuration space.
+
+config MFD_RTSX_PCI
+	tristate "Realtek PCI-E card reader"
+	depends on PCI && GENERIC_HARDIRQS
+	select MFD_CORE
+	help
+	  This supports for Realtek PCI-Express card reader including rts5209,
+	  rts5229, rtl8411, etc. Realtek card reader supports access to many
+	  types of memory cards, such as Memory Stick, Memory Stick Pro,
+	  Secure Digital and MultiMediaCard.
+
+config MFD_RC5T583
+	bool "Ricoh RC5T583 Power Management system device"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Select this option to get support for the RICOH583 Power
+	  Management system device.
+	  This driver provides common support for accessing the device
+	  through i2c interface. The device supports multiple sub-devices
+	  like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
+	  Additional drivers must be enabled in order to use the
+	  different functionality of the device.
+
+config MFD_SEC_CORE
+	bool "SAMSUNG Electronics PMIC Series Support"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	 Support for the Samsung Electronics MFD series.
+	 This driver provides common support for accessing the device,
+	 additional drivers must be enabled in order to use the functionality
+	 of the device
+
+config MFD_SI476X_CORE
+	tristate "Silicon Laboratories 4761/64/68 AM/FM radio."
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  This is the core driver for the SI476x series of AM/FM
+	  radio. This MFD driver connects the radio-si476x V4L2 module
+	  and the si476x audio codec.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called si476x-core.
+
 config MFD_SM501
-	tristate "Support for Silicon Motion SM501"
+	tristate "Silicon Motion SM501"
 	 ---help---
 	  This is the core driver for the Silicon Motion SM501 multimedia
 	  companion chip. This device is a multifunction device which may
@@ -63,46 +518,147 @@ config MFD_SM501_GPIO
 	 lines on the SM501. The platform data is used to supply the
 	 base number for the first GPIO line to register.
 
-config MFD_RTSX_PCI
-	tristate "Support for Realtek PCI-E card reader"
-	depends on PCI && GENERIC_HARDIRQS
+config MFD_SMSC
+       bool "SMSC ECE1099 series chips"
+       depends on I2C=y && GENERIC_HARDIRQS
+       select MFD_CORE
+       select REGMAP_I2C
+       help
+        If you say yes here you get support for the
+        ece1099 chips from SMSC.
+
+        To compile this driver as a module, choose M here: the
+        module will be called smsc.
+
+config ABX500_CORE
+	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
+	default y if ARCH_U300 || ARCH_U8500
+	help
+	  Say yes here if you have the ABX500 Mixed Signal IC family
+	  chips. This core driver expose register access functions.
+	  Functionality specific drivers using these functions can
+	  remain unchanged when IC changes. Binding of the functions to
+	  actual register access is done by the IC core driver.
+
+config AB3100_CORE
+	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
+	depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
 	select MFD_CORE
+	default y if ARCH_U300
 	help
-	  This supports for Realtek PCI-Express card reader including rts5209,
-	  rts5229, rtl8411, etc. Realtek card reader supports access to many
-	  types of memory cards, such as Memory Stick, Memory Stick Pro,
-	  Secure Digital and MultiMediaCard.
+	  Select this to enable the AB3100 Mixed Signal IC core
+	  functionality. This connects to a AB3100 on the I2C bus
+	  and expose a number of symbols needed for dependent devices
+	  to read and write registers and subscribe to events from
+	  this multi-functional IC. This is needed to use other features
+	  of the AB3100 such as battery-backed RTC, charging control,
+	  LEDs, vibrator, system power and temperature, power management
+	  and ALSA sound.
 
-config MFD_ASIC3
-	bool "Support for Compaq ASIC3"
-	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+config AB3100_OTP
+	tristate "ST-Ericsson AB3100 OTP functions"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
+	  programmable memory) support. This exposes a sysfs file to read
+	  out OTP values.
+
+config AB8500_CORE
+	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
+	depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+	select POWER_SUPPLY
 	select MFD_CORE
-	 ---help---
-	  This driver supports the ASIC3 multifunction chip found on many
-	  PDAs (mainly iPAQ and HTC based ones)
+	select IRQ_DOMAIN
+	help
+	  Select this option to enable access to AB8500 power management
+	  chip. This connects to U8500 either on the SSP/SPI bus (deprecated
+	  since hardware version v1.0) or the I2C bus via PRCMU. It also adds
+	  the irq_chip parts for handling the Mixed Signal chip events.
+	  This chip embeds various other multimedia funtionalities as well.
 
-config MFD_DAVINCI_VOICECODEC
-	tristate
+config AB8500_DEBUG
+       bool "Enable debug info via debugfs"
+       depends on AB8500_CORE && DEBUG_FS
+       default y if DEBUG_FS
+       help
+         Select this option if you want debug information using the debug
+         filesystem, debugfs.
+
+config AB8500_GPADC
+	bool "ST-Ericsson AB8500 GPADC driver"
+	depends on AB8500_CORE && REGULATOR_AB8500
+	default y
+	help
+	  AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
+
+config MFD_DB8500_PRCMU
+	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
+	depends on UX500_SOC_DB8500
 	select MFD_CORE
+	help
+	  Select this option to enable support for the DB8500 Power Reset
+	  and Control Management Unit. This is basically an autonomous
+	  system controller running an XP70 microprocessor, which is accessed
+	  through a register map.
 
-config MFD_DM355EVM_MSP
-	bool "DaVinci DM355 EVM microcontroller"
-	depends on I2C=y && MACH_DAVINCI_DM355_EVM
+config MFD_STMPE
+	bool "STMicroelectronics STMPE"
+	depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
+	select MFD_CORE
 	help
-	  This driver supports the MSP430 microcontroller used on these
-	  boards.  MSP430 firmware manages resets and power sequencing,
-	  inputs from buttons and the IR remote, LEDs, an RTC, and more.
+	  Support for the STMPE family of I/O Expanders from
+	  STMicroelectronics.
 
-config MFD_TI_SSP
-	tristate "TI Sequencer Serial Port support"
-	depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+	  Currently supported devices are:
+
+		STMPE811: GPIO, Touchscreen
+		STMPE1601: GPIO, Keypad
+		STMPE1801: GPIO, Keypad
+		STMPE2401: GPIO, Keypad
+		STMPE2403: GPIO, Keypad
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.  Currently available sub drivers are:
+
+		GPIO: stmpe-gpio
+		Keypad: stmpe-keypad
+		Touchscreen: stmpe-ts
+
+menu "STMicroelectronics STMPE Interface Drivers"
+depends on MFD_STMPE
+
+config STMPE_I2C
+	bool "STMicroelectronics STMPE I2C Inteface"
+	depends on I2C=y
+	default y
+	help
+	  This is used to enable I2C interface of STMPE
+
+config STMPE_SPI
+	bool "STMicroelectronics STMPE SPI Inteface"
+	depends on SPI_MASTER
+	help
+	  This is used to enable SPI interface of STMPE
+endmenu
+
+config MFD_STA2X11
+	bool "STMicroelectronics STA2X11"
+	depends on STA2X11 && GENERIC_HARDIRQS
 	select MFD_CORE
-	---help---
-	  Say Y here if you want support for the Sequencer Serial Port
-	  in a Texas Instruments TNETV107X SoC.
+	select REGMAP_MMIO
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called ti-ssp.
+config MFD_SYSCON
+	bool "System Controller Register R/W Based on Regmap"
+	select REGMAP_MMIO
+	help
+	  Select this option to enable accessing system control registers
+	  via regmap.
+
+config MFD_DAVINCI_VOICECODEC
+	tristate
+	select MFD_CORE
 
 config MFD_TI_AM335X_TSCADC
 	tristate "TI ADC / Touch Screen chip support"
@@ -116,60 +672,56 @@ config MFD_TI_AM335X_TSCADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti_am335x_tscadc.
 
-config HTC_EGPIO
-	bool "HTC EGPIO support"
-	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+config MFD_DM355EVM_MSP
+	bool "TI DaVinci DM355 EVM microcontroller"
+	depends on I2C=y && MACH_DAVINCI_DM355_EVM
 	help
-	    This driver supports the CPLD egpio chip present on
-	    several HTC phones.  It provides basic support for input
-	    pins, output pins, and irqs.
+	  This driver supports the MSP430 microcontroller used on these
+	  boards.  MSP430 firmware manages resets and power sequencing,
+	  inputs from buttons and the IR remote, LEDs, an RTC, and more.
 
-config HTC_PASIC3
-	tristate "HTC PASIC3 LED/DS1WM chip support"
+config MFD_LP8788
+	bool "TI LP8788 Power Management Unit Driver"
+	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
-	depends on GENERIC_HARDIRQS
-	help
-	  This core driver provides register access for the LED/DS1WM
-	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
-	  HTC Magician devices, respectively. Actual functionality is
-	  handled by the leds-pasic3 and ds1wm drivers.
-
-config HTC_I2CPLD
-	bool "HTC I2C PLD chip support"
-	depends on I2C=y && GPIOLIB
+	select REGMAP_I2C
+	select IRQ_DOMAIN
 	help
-	  If you say yes here you get support for the supposed CPLD
-	  found on omap850 HTC devices like the HTC Wizard and HTC Herald.
-	  This device provides input and output GPIOs through an I2C
-	  interface to one or more sub-chips.
+	  TI LP8788 PMU supports regulators, battery charger, RTC,
+	  ADC, backlight driver and current sinks.
 
-config UCB1400_CORE
-	tristate "Philips UCB1400 Core driver"
-	depends on AC97_BUS
-	depends on GPIOLIB
+config MFD_OMAP_USB_HOST
+	bool "TI OMAP USBHS core and TLL driver"
+	depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
+	default y
 	help
-	  This enables support for the Philips UCB1400 core functions.
-	  The UCB1400 is an AC97 audio codec.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ucb1400_core.
+	  This is the core driver for the OAMP EHCI and OHCI drivers.
+	  This MFD driver does the required setup functionalities for
+	  OMAP USB Host drivers.
 
-config MFD_LM3533
-	tristate "LM3533 Lighting Power chip"
-	depends on I2C
+config MFD_PALMAS
+	bool "TI Palmas series chips"
 	select MFD_CORE
 	select REGMAP_I2C
-	depends on GENERIC_HARDIRQS
+	select REGMAP_IRQ
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
-	  Say yes here to enable support for National Semiconductor / TI
-	  LM3533 Lighting Power chips.
+	  If you say yes here you get support for the Palmas
+	  series of PMIC chips from Texas Instruments.
 
-	  This driver provides common support for accessing the device;
-	  additional drivers must be enabled in order to use the LED,
-	  backlight or ambient-light-sensor functionality of the device.
+config MFD_TI_SSP
+	tristate "TI Sequencer Serial Port support"
+	depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+	select MFD_CORE
+	---help---
+	  Say Y here if you want support for the Sequencer Serial Port
+	  in a Texas Instruments TNETV107X SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ti-ssp.
 
 config TPS6105X
-	tristate "TPS61050/61052 Boost Converters"
+	tristate "TI TPS61050/61052 Boost Converters"
 	depends on I2C
 	select REGULATOR
 	select MFD_CORE
@@ -182,7 +734,7 @@ config TPS6105X
 	  also contains a GPIO pin.
 
 config TPS65010
-	tristate "TPS6501x Power Management chips"
+	tristate "TI TPS6501x Power Management chips"
 	depends on I2C && GPIOLIB
 	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 	help
@@ -195,7 +747,7 @@ config TPS65010
 	  will be called tps65010.
 
 config TPS6507X
-	tristate "TPS6507x Power Management / Touch Screen chips"
+	tristate "TI TPS6507x Power Management / Touch Screen chips"
 	select MFD_CORE
 	depends on I2C && GENERIC_HARDIRQS
 	help
@@ -206,8 +758,24 @@ config TPS6507X
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps6507x.
 
+config TPS65911_COMPARATOR
+	tristate
+
+config MFD_TPS65090
+	bool "TI TPS65090 Power Management chips"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  If you say yes here you get support for the TPS65090 series of
+	  Power Management chips.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config MFD_TPS65217
-	tristate "TPS65217 Power Management / White LED chips"
+	tristate "TI TPS65217 Power Management / White LED chips"
 	depends on I2C && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
@@ -222,7 +790,7 @@ config MFD_TPS65217
 	  will be called tps65217.
 
 config MFD_TPS6586X
-	bool "TPS6586x Power Management chips"
+	bool "TI TPS6586x Power Management chips"
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
@@ -237,7 +805,7 @@ config MFD_TPS6586X
 	  will be called tps6586x.
 
 config MFD_TPS65910
-	bool "TPS65910 Power Management chip"
+	bool "TI TPS65910 Power Management chip"
 	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
@@ -248,11 +816,14 @@ config MFD_TPS65910
 	  Power Management chips.
 
 config MFD_TPS65912
-	bool
+	bool "TI TPS65912 Power Management chip"
 	depends on GPIOLIB
+	help
+	  If you say yes here you get support for the TPS65912 series of
+	  PM chips.
 
 config MFD_TPS65912_I2C
-	bool "TPS65912 Power Management chip with I2C"
+	bool "TI TPS65912 Power Management chip with I2C"
 	select MFD_CORE
 	select MFD_TPS65912
 	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
@@ -261,7 +832,7 @@ config MFD_TPS65912_I2C
 	  PM chips with I2C interface.
 
 config MFD_TPS65912_SPI
-	bool "TPS65912 Power Management chip with SPI"
+	bool "TI TPS65912 Power Management chip with SPI"
 	select MFD_CORE
 	select MFD_TPS65912
 	depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
@@ -283,18 +854,8 @@ config MFD_TPS80031
 	  ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
 	  Power Path from USB, 32K clock generator.
 
-config MENELAUS
-	bool "Texas Instruments TWL92330/Menelaus PM chip"
-	depends on I2C=y && ARCH_OMAP2
-	help
-	  If you say yes here you get support for the Texas Instruments
-	  TWL92330/Menelaus Power Management chip. This include voltage
-	  regulators, Dual slot memory card transceivers, real-time clock
-	  and other features that are often used in portable devices like
-	  cell phones and PDAs.
-
 config TWL4030_CORE
-	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
+	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
 	depends on I2C=y && GENERIC_HARDIRQS
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -310,7 +871,7 @@ config TWL4030_CORE
 	  versions) and many other features.
 
 config TWL4030_MADC
-	tristate "Texas Instruments TWL4030 MADC"
+	tristate "TI TWL4030 MADC"
 	depends on TWL4030_CORE
 	help
 	This driver provides support for triton TWL4030-MADC. The
@@ -320,7 +881,7 @@ config TWL4030_MADC
 	named twl4030-madc
 
 config TWL4030_POWER
-	bool "Support power resources on TWL4030 family chips"
+	bool "TI TWL4030 power resources"
 	depends on TWL4030_CORE && ARM
 	help
 	  Say yes here if you want to use the power resources on the
@@ -333,13 +894,13 @@ config TWL4030_POWER
 	  or reset when a sleep, wakeup or warm reset event occurs.
 
 config MFD_TWL4030_AUDIO
-	bool
+	bool "TI TWL4030 Audio"
 	depends on TWL4030_CORE && GENERIC_HARDIRQS
 	select MFD_CORE
 	default n
 
 config TWL6040_CORE
-	bool "Support for TWL6040 audio codec"
+	bool "TI TWL6040 audio codec"
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
@@ -352,48 +913,53 @@ config TWL6040_CORE
 	  additional drivers must be enabled in order to use the
 	  functionality of the device (audio, vibra).
 
-config MFD_STMPE
-	bool "Support STMicroelectronics STMPE"
-	depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
-	select MFD_CORE
+config MENELAUS
+	bool "TI TWL92330/Menelaus PM chip"
+	depends on I2C=y && ARCH_OMAP2
 	help
-	  Support for the STMPE family of I/O Expanders from
-	  STMicroelectronics.
-
-	  Currently supported devices are:
-
-		STMPE811: GPIO, Touchscreen
-		STMPE1601: GPIO, Keypad
-		STMPE2401: GPIO, Keypad
-		STMPE2403: GPIO, Keypad
+	  If you say yes here you get support for the Texas Instruments
+	  TWL92330/Menelaus Power Management chip. This include voltage
+	  regulators, Dual slot memory card transceivers, real-time clock
+	  and other features that are often used in portable devices like
+	  cell phones and PDAs.
 
-	  This driver provides common support for accessing the device,
-	  additional drivers must be enabled in order to use the functionality
-	  of the device.  Currently available sub drivers are:
+config MFD_WL1273_CORE
+	tristate "TI WL1273 FM radio"
+	depends on I2C && GENERIC_HARDIRQS
+	select MFD_CORE
+	default n
+	help
+	  This is the core driver for the TI WL1273 FM radio. This MFD
+	  driver connects the radio-wl1273 V4L2 module and the wl1273
+	  audio codec.
 
-		GPIO: stmpe-gpio
-		Keypad: stmpe-keypad
-		Touchscreen: stmpe-ts
+config MFD_LM3533
+	tristate "TI/National Semiconductor LM3533 Lighting Power chip"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	depends on GENERIC_HARDIRQS
+	help
+	  Say yes here to enable support for National Semiconductor / TI
+	  LM3533 Lighting Power chips.
 
-menu "STMPE Interface Drivers"
-depends on MFD_STMPE
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the LED,
+	  backlight or ambient-light-sensor functionality of the device.
 
-config STMPE_I2C
-	bool "STMPE I2C Inteface"
-	depends on I2C=y
-	default y
-	help
-	  This is used to enable I2C interface of STMPE
+config MFD_TIMBERDALE
+	tristate "Timberdale FPGA"
+	select MFD_CORE
+	depends on PCI && GPIOLIB
+	---help---
+	This is the core driver for the timberdale FPGA. This device is a
+	multifunction device which exposes numerous platform devices.
 
-config STMPE_SPI
-	bool "STMPE SPI Inteface"
-	depends on SPI_MASTER
-	help
-	  This is used to enable SPI interface of STMPE
-endmenu
+	The timberdale FPGA can be found on the Intel Atom development board
+	for in-vehicle infontainment, called Russellville.
 
 config MFD_TC3589X
-	bool "Support Toshiba TC35892 and variants"
+	bool "Toshiba TC35892 and variants"
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
@@ -408,27 +974,15 @@ config MFD_TMIO
 	default n
 
 config MFD_T7L66XB
-	bool "Support Toshiba T7L66XB"
+	bool "Toshiba T7L66XB"
 	depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
 	select MFD_CORE
 	select MFD_TMIO
 	help
 	  Support for Toshiba Mobile IO Controller T7L66XB
 
-config MFD_SMSC
-       bool "Support for the SMSC ECE1099 series chips"
-       depends on I2C=y && GENERIC_HARDIRQS
-       select MFD_CORE
-       select REGMAP_I2C
-       help
-        If you say yes here you get support for the
-        ece1099 chips from SMSC.
-
-        To compile this driver as a module, choose M here: the
-        module will be called smsc.
-
 config MFD_TC6387XB
-	bool "Support Toshiba TC6387XB"
+	bool "Toshiba TC6387XB"
 	depends on ARM && HAVE_CLK
 	select MFD_CORE
 	select MFD_TMIO
@@ -436,7 +990,7 @@ config MFD_TC6387XB
 	  Support for Toshiba Mobile IO Controller TC6387XB
 
 config MFD_TC6393XB
-	bool "Support Toshiba TC6393XB"
+	bool "Toshiba TC6393XB"
 	depends on ARM && HAVE_CLK
 	select GPIOLIB
 	select MFD_CORE
@@ -444,165 +998,14 @@ config MFD_TC6393XB
 	help
 	  Support for Toshiba Mobile IO Controller TC6393XB
 
-config PMIC_DA903X
-	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
-	depends on I2C=y
-	help
-	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
-	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
-	  usually found on PXA processors-based platforms. This includes
-	  the I2C driver and the core APIs _only_, you have to select
-	  individual components like LCD backlight, voltage regulators,
-	  LEDs and battery-charger under the corresponding menus.
-
-config PMIC_DA9052
-	bool
-	select MFD_CORE
-
-config MFD_DA9052_SPI
-	bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
-	select REGMAP_SPI
-	select REGMAP_IRQ
-	select PMIC_DA9052
-	depends on SPI_MASTER=y && GENERIC_HARDIRQS
-	help
-	  Support for the Dialog Semiconductor DA9052 PMIC
-	  when controlled using SPI. This driver provides common support
-	  for accessing the device, additional drivers must be enabled in
-	  order to use the functionality of the device.
-
-config MFD_DA9052_I2C
-	bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
-	select REGMAP_I2C
-	select REGMAP_IRQ
-	select PMIC_DA9052
-	depends on I2C=y && GENERIC_HARDIRQS
-	help
-	  Support for the Dialog Semiconductor DA9052 PMIC
-	  when controlled using I2C. This driver provides common support
-	  for accessing the device, additional drivers must be enabled in
-	  order to use the functionality of the device.
-
-config MFD_DA9055
-	bool "Dialog Semiconductor DA9055 PMIC Support"
-	select REGMAP_I2C
-	select REGMAP_IRQ
-	select PMIC_DA9055
-	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS
-	help
-	  Say yes here for support of Dialog Semiconductor DA9055. This is
-	  a Power Management IC. This driver provides common support for
-	  accessing the device as well as the I2C interface to the chip itself.
-	  Additional drivers must be enabled in order to use the functionality
-	  of the device.
-
-	  This driver can be built as a module. If built as a module it will be
-	  called "da9055"
-
-config PMIC_ADP5520
-	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
-	depends on I2C=y
-	help
-	  Say yes here to add support for Analog Devices AD5520 and ADP5501,
-	  Multifunction Power Management IC. This includes
-	  the I2C driver and the core APIs _only_, you have to select
-	  individual components like LCD backlight, LEDs, GPIOs and Kepad
-	  under the corresponding menus.
-
-config MFD_LP8788
-	bool "Texas Instruments LP8788 Power Management Unit Driver"
-	depends on I2C=y && GENERIC_HARDIRQS
-	select MFD_CORE
-	select REGMAP_I2C
-	select IRQ_DOMAIN
-	help
-	  TI LP8788 PMU supports regulators, battery charger, RTC,
-	  ADC, backlight driver and current sinks.
-
-config MFD_MAX77686
-	bool "Maxim Semiconductor MAX77686 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
-	select MFD_CORE
-	select REGMAP_I2C
-	select IRQ_DOMAIN
-	help
-	  Say yes here to support for Maxim Semiconductor MAX77686.
-	  This is a Power Management IC with RTC on chip.
-	  This driver provides common support for accessing the device;
-	  additional drivers must be enabled in order to use the functionality
-	  of the device.
-
-config MFD_MAX77693
-	bool "Maxim Semiconductor MAX77693 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
-	select MFD_CORE
-	select REGMAP_I2C
-	help
-	  Say yes here to support for Maxim Semiconductor MAX77693.
-	  This is a companion Power Management IC with Flash, Haptic, Charger,
-	  and MUIC(Micro USB Interface Controller) controls on chip.
-	  This driver provides common support for accessing the device;
-	  additional drivers must be enabled in order to use the functionality
-	  of the device.
-
-config MFD_MAX8907
-	tristate "Maxim Semiconductor MAX8907 PMIC Support"
-	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS
-	select REGMAP_I2C
-	select REGMAP_IRQ
-	help
-	  Say yes here to support for Maxim Semiconductor MAX8907. This is
-	  a Power Management IC. This driver provides common support for
-	  accessing the device; additional drivers must be enabled in order
-	  to use the functionality of the device.
-
-config MFD_MAX8925
-	bool "Maxim Semiconductor MAX8925 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
-	select MFD_CORE
-	help
-	  Say yes here to support for Maxim Semiconductor MAX8925. This is
-	  a Power Management IC. This driver provides common support for
-	  accessing the device, additional drivers must be enabled in order
-	  to use the functionality of the device.
-
-config MFD_MAX8997
-	bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
-	select MFD_CORE
-	select IRQ_DOMAIN
-	help
-	  Say yes here to support for Maxim Semiconductor MAX8997/8966.
-	  This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
-	  MUIC controls on chip.
-	  This driver provides common support for accessing the device;
-	  additional drivers must be enabled in order to use the functionality
-	  of the device.
-
-config MFD_MAX8998
-	bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
-	select MFD_CORE
-	help
-	  Say yes here to support for Maxim Semiconductor MAX8998 and
-	  National Semiconductor LP3974. This is a Power Management IC.
-	  This driver provides common support for accessing the device,
-	  additional drivers must be enabled in order to use the functionality
-	  of the device.
-
-config MFD_SEC_CORE
-	bool "SAMSUNG Electronics PMIC Series Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+config MFD_VX855
+	tristate "VIA VX855/VX875 integrated south bridge"
+	depends on PCI && GENERIC_HARDIRQS
 	select MFD_CORE
-	select REGMAP_I2C
-	select REGMAP_IRQ
 	help
-	 Support for the Samsung Electronics MFD series.
-	 This driver provides common support for accessing the device,
-	 additional drivers must be enabled in order to use the functionality
-	 of the device
+	  Say yes here to enable support for various functions of the
+	  VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
+	  and/or vx855_gpio drivers for this to do anything useful.
 
 config MFD_ARIZONA
 	select REGMAP
@@ -611,7 +1014,7 @@ config MFD_ARIZONA
 	bool
 
 config MFD_ARIZONA_I2C
-	tristate "Support Wolfson Microelectronics Arizona platform with I2C"
+	tristate "Wolfson Microelectronics Arizona platform with I2C"
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_I2C
@@ -621,7 +1024,7 @@ config MFD_ARIZONA_I2C
 	  core functionality controlled via I2C.
 
 config MFD_ARIZONA_SPI
-	tristate "Support Wolfson Microelectronics Arizona platform with SPI"
+	tristate "Wolfson Microelectronics Arizona platform with SPI"
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_SPI
@@ -631,19 +1034,19 @@ config MFD_ARIZONA_SPI
 	  core functionality controlled via I2C.
 
 config MFD_WM5102
-	bool "Support Wolfson Microelectronics WM5102"
+	bool "Wolfson Microelectronics WM5102"
 	depends on MFD_ARIZONA
 	help
 	  Support for Wolfson Microelectronics WM5102 low power audio SoC
 
 config MFD_WM5110
-	bool "Support Wolfson Microelectronics WM5110"
+	bool "Wolfson Microelectronics WM5110"
 	depends on MFD_ARIZONA
 	help
 	  Support for Wolfson Microelectronics WM5110 low power audio SoC
 
 config MFD_WM8400
-	bool "Support Wolfson Microelectronics WM8400"
+	bool "Wolfson Microelectronics WM8400"
 	select MFD_CORE
 	depends on I2C=y && GENERIC_HARDIRQS
 	select REGMAP_I2C
@@ -658,7 +1061,7 @@ config MFD_WM831X
 	depends on GENERIC_HARDIRQS
 
 config MFD_WM831X_I2C
-	bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
+	bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
 	select MFD_CORE
 	select MFD_WM831X
 	select REGMAP_I2C
@@ -671,7 +1074,7 @@ config MFD_WM831X_I2C
 	  order to use the functionality of the device.
 
 config MFD_WM831X_SPI
-	bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
+	bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
 	select MFD_CORE
 	select MFD_WM831X
 	select REGMAP_SPI
@@ -687,56 +1090,8 @@ config MFD_WM8350
 	bool
 	depends on GENERIC_HARDIRQS
 
-config MFD_WM8350_CONFIG_MODE_0
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8350_CONFIG_MODE_1
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8350_CONFIG_MODE_2
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8350_CONFIG_MODE_3
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_0
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_1
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_2
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_3
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_0
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_1
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_2
-	bool
-	depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_3
-	bool
-	depends on MFD_WM8350
-
 config MFD_WM8350_I2C
-	bool "Support Wolfson Microelectronics WM8350 with I2C"
+	bool "Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
 	depends on I2C=y && GENERIC_HARDIRQS
 	help
@@ -747,7 +1102,7 @@ config MFD_WM8350_I2C
 	  selected to enable support for the functionality of the chip.
 
 config MFD_WM8994
-	bool "Support Wolfson Microelectronics WM8994"
+	bool "Wolfson Microelectronics WM8994"
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -760,365 +1115,6 @@ config MFD_WM8994
 	  core support for the WM8994, in order to use the actual
 	  functionaltiy of the device other drivers must be enabled.
 
-config MFD_PCF50633
-	tristate "Support for NXP PCF50633"
-	depends on I2C
-	select REGMAP_I2C
-	help
-	  Say yes here if you have NXP PCF50633 chip on your board.
-	  This core driver provides register access and IRQ handling
-	  facilities, and registers devices for the various functions
-	  so that function-specific drivers can bind to them.
-
-config PCF50633_ADC
-	tristate "Support for NXP PCF50633 ADC"
-	depends on MFD_PCF50633
-	help
-	 Say yes here if you want to include support for ADC in the
-	 NXP PCF50633 chip.
-
-config PCF50633_GPIO
-	tristate "Support for NXP PCF50633 GPIO"
-	depends on MFD_PCF50633
-	help
-	 Say yes here if you want to include support GPIO for pins on
-	 the PCF50633 chip.
-
-config MFD_MC13783
-	tristate
-
-config MFD_MC13XXX
-	tristate
-	depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
-	select MFD_CORE
-	select MFD_MC13783
-	help
-	  Enable support for the Freescale MC13783 and MC13892 PMICs.
-	  This driver provides common support for accessing the device,
-	  additional drivers must be enabled in order to use the
-	  functionality of the device.
-
-config MFD_MC13XXX_SPI
-	tristate "Freescale MC13783 and MC13892 SPI interface"
-	depends on SPI_MASTER && GENERIC_HARDIRQS
-	select REGMAP_SPI
-	select MFD_MC13XXX
-	help
-	  Select this if your MC13xxx is connected via an SPI bus.
-
-config MFD_MC13XXX_I2C
-	tristate "Freescale MC13892 I2C interface"
-	depends on I2C && GENERIC_HARDIRQS
-	select REGMAP_I2C
-	select MFD_MC13XXX
-	help
-	  Select this if your MC13xxx is connected via an I2C bus.
-
-config ABX500_CORE
-	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
-	default y if ARCH_U300 || ARCH_U8500
-	help
-	  Say yes here if you have the ABX500 Mixed Signal IC family
-	  chips. This core driver expose register access functions.
-	  Functionality specific drivers using these functions can
-	  remain unchanged when IC changes. Binding of the functions to
-	  actual register access is done by the IC core driver.
-
-config AB3100_CORE
-	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
-	depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
-	select MFD_CORE
-	default y if ARCH_U300
-	help
-	  Select this to enable the AB3100 Mixed Signal IC core
-	  functionality. This connects to a AB3100 on the I2C bus
-	  and expose a number of symbols needed for dependent devices
-	  to read and write registers and subscribe to events from
-	  this multi-functional IC. This is needed to use other features
-	  of the AB3100 such as battery-backed RTC, charging control,
-	  LEDs, vibrator, system power and temperature, power management
-	  and ALSA sound.
-
-config AB3100_OTP
-	tristate "ST-Ericsson AB3100 OTP functions"
-	depends on AB3100_CORE
-	default y if AB3100_CORE
-	help
-	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
-	  programmable memory) support. This exposes a sysfs file to read
-	  out OTP values.
-
-config EZX_PCAP
-	bool "PCAP Support"
-	depends on GENERIC_HARDIRQS && SPI_MASTER
-	help
-	  This enables the PCAP ASIC present on EZX Phones. This is
-	  needed for MMC, TouchScreen, Sound, USB, etc..
-
-config AB8500_CORE
-	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
-	depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
-	select POWER_SUPPLY
-	select MFD_CORE
-	select IRQ_DOMAIN
-	help
-	  Select this option to enable access to AB8500 power management
-	  chip. This connects to U8500 either on the SSP/SPI bus (deprecated
-	  since hardware version v1.0) or the I2C bus via PRCMU. It also adds
-	  the irq_chip parts for handling the Mixed Signal chip events.
-	  This chip embeds various other multimedia funtionalities as well.
-
-config AB8500_DEBUG
-       bool "Enable debug info via debugfs"
-       depends on AB8500_CORE && DEBUG_FS
-       default y if DEBUG_FS
-       help
-         Select this option if you want debug information using the debug
-         filesystem, debugfs.
-
-config AB8500_GPADC
-	bool "AB8500 GPADC driver"
-	depends on AB8500_CORE && REGULATOR_AB8500
-	default y
-	help
-	  AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
-
-config MFD_DB8500_PRCMU
-	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
-	depends on UX500_SOC_DB8500
-	select MFD_CORE
-	help
-	  Select this option to enable support for the DB8500 Power Reset
-	  and Control Management Unit. This is basically an autonomous
-	  system controller running an XP70 microprocessor, which is accessed
-	  through a register map.
-
-config MFD_CS5535
-	tristate "Support for CS5535 and CS5536 southbridge core functions"
-	select MFD_CORE
-	depends on PCI && X86
-	---help---
-	  This is the core driver for CS5535/CS5536 MFD functions.  This is
-          necessary for using the board's GPIO and MFGPT functionality.
-
-config MFD_TIMBERDALE
-	tristate "Support for the Timberdale FPGA"
-	select MFD_CORE
-	depends on PCI && GPIOLIB
-	---help---
-	This is the core driver for the timberdale FPGA. This device is a
-	multifunction device which exposes numerous platform devices.
-
-	The timberdale FPGA can be found on the Intel Atom development board
-	for in-vehicle infontainment, called Russellville.
-
-config LPC_SCH
-	tristate "Intel SCH LPC"
-	depends on PCI && GENERIC_HARDIRQS
-	select MFD_CORE
-	help
-	  LPC bridge function of the Intel SCH provides support for
-	  System Management Bus and General Purpose I/O.
-
-config LPC_ICH
-	tristate "Intel ICH LPC"
-	depends on PCI && GENERIC_HARDIRQS
-	select MFD_CORE
-	help
-	  The LPC bridge function of the Intel ICH provides support for
-	  many functional units. This driver provides needed support for
-	  other drivers to control these functions, currently GPIO and
-	  watchdog.
-
-config MFD_RDC321X
-	tristate "Support for RDC-R321x southbridge"
-	select MFD_CORE
-	depends on PCI && GENERIC_HARDIRQS
-	help
-	  Say yes here if you want to have support for the RDC R-321x SoC
-	  southbridge which provides access to GPIOs and Watchdog using the
-	  southbridge PCI device configuration space.
-
-config MFD_JANZ_CMODIO
-	tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
-	select MFD_CORE
-	depends on PCI && GENERIC_HARDIRQS
-	help
-	  This is the core driver for the Janz CMOD-IO PCI MODULbus
-	  carrier board. This device is a PCI to MODULbus bridge which may
-	  host many different types of MODULbus daughterboards, including
-	  CAN and GPIO controllers.
-
-config MFD_JZ4740_ADC
-	bool "Support for the JZ4740 SoC ADC core"
-	select MFD_CORE
-	select GENERIC_IRQ_CHIP
-	depends on MACH_JZ4740
-	help
-	  Say yes here if you want support for the ADC unit in the JZ4740 SoC.
-	  This driver is necessary for jz4740-battery and jz4740-hwmon driver.
-
-config MFD_VX855
-	tristate "Support for VIA VX855/VX875 integrated south bridge"
-	depends on PCI && GENERIC_HARDIRQS
-	select MFD_CORE
-	help
-	  Say yes here to enable support for various functions of the
-	  VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
-	  and/or vx855_gpio drivers for this to do anything useful.
-
-config MFD_WL1273_CORE
-	tristate "Support for TI WL1273 FM radio."
-	depends on I2C && GENERIC_HARDIRQS
-	select MFD_CORE
-	default n
-	help
-	  This is the core driver for the TI WL1273 FM radio. This MFD
-	  driver connects the radio-wl1273 V4L2 module and the wl1273
-	  audio codec.
-
-config MFD_OMAP_USB_HOST
-	bool "Support OMAP USBHS core and TLL driver"
-	depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
-	default y
-	help
-	  This is the core driver for the OAMP EHCI and OHCI drivers.
-	  This MFD driver does the required setup functionalities for
-	  OMAP USB Host drivers.
-
-config MFD_PM8XXX
-	tristate
-
-config MFD_PM8921_CORE
-	tristate "Qualcomm PM8921 PMIC chip"
-	depends on SSBI && BROKEN
-	select MFD_CORE
-	select MFD_PM8XXX
-	help
-	  If you say yes to this option, support will be included for the
-	  built-in PM8921 PMIC chip.
-
-	  This is required if your board has a PM8921 and uses its features,
-	  such as: MPPs, GPIOs, regulators, interrupts, and PWM.
-
-	  Say M here if you want to include support for PM8921 chip as a module.
-	  This will build a module called "pm8921-core".
-
-config MFD_PM8XXX_IRQ
-	bool "Support for Qualcomm PM8xxx IRQ features"
-	depends on MFD_PM8XXX
-	default y if MFD_PM8XXX
-	help
-	  This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
-
-	  This is required to use certain other PM 8xxx features, such as GPIO
-	  and MPP.
-
-config TPS65911_COMPARATOR
-	tristate
-
-config MFD_TPS65090
-	bool "TPS65090 Power Management chips"
-	depends on I2C=y && GENERIC_HARDIRQS
-	select MFD_CORE
-	select REGMAP_I2C
-	select REGMAP_IRQ
-	help
-	  If you say yes here you get support for the TPS65090 series of
-	  Power Management chips.
-	  This driver provides common support for accessing the device,
-	  additional drivers must be enabled in order to use the
-	  functionality of the device.
-
-config MFD_AAT2870_CORE
-	bool "Support for the AnalogicTech AAT2870"
-	select MFD_CORE
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
-	help
-	  If you say yes here you get support for the AAT2870.
-	  This driver provides common support for accessing the device,
-	  additional drivers must be enabled in order to use the
-	  functionality of the device.
-
-config MFD_INTEL_MSIC
-	bool "Support for Intel MSIC"
-	depends on INTEL_SCU_IPC
-	select MFD_CORE
-	help
-	  Select this option to enable access to Intel MSIC (Avatele
-	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
-	  devices used in Intel Medfield platforms.
-
-config MFD_RC5T583
-	bool "Ricoh RC5T583 Power Management system device"
-	depends on I2C=y && GENERIC_HARDIRQS
-	select MFD_CORE
-	select REGMAP_I2C
-	help
-	  Select this option to get support for the RICOH583 Power
-	  Management system device.
-	  This driver provides common support for accessing the device
-	  through i2c interface. The device supports multiple sub-devices
-	  like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
-	  Additional drivers must be enabled in order to use the
-	  different functionality of the device.
-
-config MFD_STA2X11
-	bool "STA2X11 multi function device support"
-	depends on STA2X11 && GENERIC_HARDIRQS
-	select MFD_CORE
-	select REGMAP_MMIO
-
-config MFD_SYSCON
-	bool "System Controller Register R/W Based on Regmap"
-	depends on OF
-	select REGMAP_MMIO
-	help
-	  Select this option to enable accessing system control registers
-	  via regmap.
-
-config MFD_PALMAS
-	bool "Support for the TI Palmas series chips"
-	select MFD_CORE
-	select REGMAP_I2C
-	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
-	help
-	  If you say yes here you get support for the Palmas
-	  series of PMIC chips from Texas Instruments.
-
-config MFD_VIPERBOARD
-        tristate "Support for Nano River Technologies Viperboard"
-	select MFD_CORE
-	depends on USB && GENERIC_HARDIRQS
-	default n
-	help
-	  Say yes here if you want support for Nano River Technologies
-	  Viperboard.
-	  There are mfd cell drivers available for i2c master, adc and
-	  both gpios found on the board. The spi part does not yet
-	  have a driver.
-	  You need to select the mfd cell drivers separately.
-	  The drivers do not support all features the board exposes.
-
-config MFD_RETU
-	tristate "Support for Retu multi-function device"
-	select MFD_CORE
-	depends on I2C && GENERIC_HARDIRQS
-	select REGMAP_IRQ
-	help
-	  Retu is a multi-function device found on Nokia Internet Tablets
-	  (770, N800 and N810).
-
-config MFD_AS3711
-	bool "Support for AS3711"
-	select MFD_CORE
-	select REGMAP_I2C
-	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
-	help
-	  Support for the AS3711 PMIC from AMS
-
 endmenu
 endif
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b90409c23664..718e94a2a9a7 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,8 +8,11 @@ obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
 obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
+obj-$(CONFIG_MFD_CROS_EC)	+= cros_ec.o
+obj-$(CONFIG_MFD_CROS_EC_I2C)	+= cros_ec_i2c.o
+obj-$(CONFIG_MFD_CROS_EC_SPI)	+= cros_ec_spi.o
 
-rtsx_pci-objs			:= rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o
+rtsx_pci-objs			:= rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
 obj-$(CONFIG_MFD_RTSX_PCI)	+= rtsx_pci.o
 
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
@@ -131,6 +134,10 @@ obj-$(CONFIG_MFD_JZ4740_ADC)	+= jz4740-adc.o
 obj-$(CONFIG_MFD_TPS6586X)	+= tps6586x.o
 obj-$(CONFIG_MFD_VX855)		+= vx855.o
 obj-$(CONFIG_MFD_WL1273_CORE)	+= wl1273-core.o
+
+si476x-core-y := si476x-cmd.o si476x-prop.o si476x-i2c.o
+obj-$(CONFIG_MFD_SI476X_CORE)	+= si476x-core.o
+
 obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
 obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o omap-usb-tll.o
 obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index f1beb4971f87..dfdb0a2b6835 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -367,12 +367,12 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 	int i, j;
 	int ret = 0;
 
-	aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL);
+	aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data),
+				GFP_KERNEL);
 	if (!aat2870) {
 		dev_err(&client->dev,
 			"Failed to allocate memory for aat2870\n");
-		ret = -ENOMEM;
-		goto out;
+		return -ENOMEM;
 	}
 
 	aat2870->dev = &client->dev;
@@ -400,12 +400,12 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 		aat2870->init(aat2870);
 
 	if (aat2870->en_pin >= 0) {
-		ret = gpio_request_one(aat2870->en_pin, GPIOF_OUT_INIT_HIGH,
-				       "aat2870-en");
+		ret = devm_gpio_request_one(&client->dev, aat2870->en_pin,
+					GPIOF_OUT_INIT_HIGH, "aat2870-en");
 		if (ret < 0) {
 			dev_err(&client->dev,
 				"Failed to request GPIO %d\n", aat2870->en_pin);
-			goto out_kfree;
+			return ret;
 		}
 	}
 
@@ -436,11 +436,6 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 
 out_disable:
 	aat2870_disable(aat2870);
-	if (aat2870->en_pin >= 0)
-		gpio_free(aat2870->en_pin);
-out_kfree:
-	kfree(aat2870);
-out:
 	return ret;
 }
 
@@ -452,11 +447,8 @@ static int aat2870_i2c_remove(struct i2c_client *client)
 
 	mfd_remove_devices(aat2870->dev);
 	aat2870_disable(aat2870);
-	if (aat2870->en_pin >= 0)
-		gpio_free(aat2870->en_pin);
 	if (aat2870->uninit)
 		aat2870->uninit(aat2870);
-	kfree(aat2870);
 
 	return 0;
 }
diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
index 8440010eb2b8..d7ce016029fa 100644
--- a/drivers/mfd/ab3100-otp.c
+++ b/drivers/mfd/ab3100-otp.c
@@ -248,19 +248,7 @@ static struct platform_driver ab3100_otp_driver = {
 	.remove	 = __exit_p(ab3100_otp_remove),
 };
 
-static int __init ab3100_otp_init(void)
-{
-	return platform_driver_probe(&ab3100_otp_driver,
-				     ab3100_otp_probe);
-}
-
-static void __exit ab3100_otp_exit(void)
-{
-	platform_driver_unregister(&ab3100_otp_driver);
-}
-
-module_init(ab3100_otp_init);
-module_exit(ab3100_otp_exit);
+module_platform_driver_probe(ab3100_otp_driver, ab3100_otp_probe);
 
 MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
 MODULE_DESCRIPTION("AB3100 OTP Readout Driver");
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index f276352cc9ef..8e8a016effe9 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -458,22 +458,23 @@ static void update_latch_offset(u8 *offset, int i)
 static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 					int latch_offset, u8 latch_val)
 {
-	int int_bit = __ffs(latch_val);
-	int line, i;
+	int int_bit, line, i;
 
-	do {
-		int_bit = __ffs(latch_val);
+	for (i = 0; i < ab8500->mask_size; i++)
+		if (ab8500->irq_reg_offset[i] == latch_offset)
+			break;
 
-		for (i = 0; i < ab8500->mask_size; i++)
-			if (ab8500->irq_reg_offset[i] == latch_offset)
-				break;
+	if (i >= ab8500->mask_size) {
+		dev_err(ab8500->dev, "Register offset 0x%2x not declared\n",
+				latch_offset);
+		return -ENXIO;
+	}
 
-		if (i >= ab8500->mask_size) {
-			dev_err(ab8500->dev, "Register offset 0x%2x not declared\n",
-					latch_offset);
-			return -ENXIO;
-		}
+	/* ignore masked out interrupts */
+	latch_val &= ~ab8500->mask[i];
 
+	while (latch_val) {
+		int_bit = __ffs(latch_val);
 		line = (i << 3) + int_bit;
 		latch_val &= ~(1 << int_bit);
 
@@ -491,7 +492,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 			line += 1;
 
 		handle_nested_irq(ab8500->irq_base + line);
-	} while (latch_val);
+	}
 
 	return 0;
 }
@@ -1107,6 +1108,7 @@ static struct mfd_cell ab8500_devs[] = {
 	},
 	{
 		.name = "ab8500-usb",
+		.of_compatible = "stericsson,ab8500-usb",
 		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
 		.resources = ab8500_usb_resources,
 	},
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 65f72284185d..5e65b28a5d09 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -332,7 +332,7 @@ if (ad_value < 0) {
 
 	return voltage;
 }
-EXPORT_SYMBOL(ab8500_gpadc_convert);
+EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
 
 /**
  * ab8500_gpadc_read_raw() - gpadc read
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 272479cdb107..fbca1ced49fa 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -242,7 +242,7 @@ static int __init ab8500_sysctrl_init(void)
 {
 	return platform_driver_register(&ab8500_sysctrl_driver);
 }
-subsys_initcall(ab8500_sysctrl_init);
+arch_initcall(ab8500_sysctrl_init);
 
 MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com");
 MODULE_DESCRIPTION("AB8500 system control driver");
diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
index 210dd038bb5a..0d2eba023439 100644
--- a/drivers/mfd/adp5520.c
+++ b/drivers/mfd/adp5520.c
@@ -36,6 +36,7 @@ struct adp5520_chip {
 	struct blocking_notifier_head notifier_list;
 	int irq;
 	unsigned long id;
+	uint8_t mode;
 };
 
 static int __adp5520_read(struct i2c_client *client,
@@ -326,7 +327,10 @@ static int adp5520_suspend(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
 
-	adp5520_clr_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY);
+	adp5520_read(chip->dev, ADP5520_MODE_STATUS, &chip->mode);
+	/* All other bits are W1C */
+	chip->mode &= ADP5520_BL_EN | ADP5520_DIM_EN | ADP5520_nSTNBY;
+	adp5520_write(chip->dev, ADP5520_MODE_STATUS, 0);
 	return 0;
 }
 
@@ -335,7 +339,7 @@ static int adp5520_resume(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
 
-	adp5520_set_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY);
+	adp5520_write(chip->dev, ADP5520_MODE_STATUS, chip->mode);
 	return 0;
 }
 #endif
@@ -360,17 +364,7 @@ static struct i2c_driver adp5520_driver = {
 	.id_table 	= adp5520_id,
 };
 
-static int __init adp5520_init(void)
-{
-	return i2c_add_driver(&adp5520_driver);
-}
-module_init(adp5520_init);
-
-static void __exit adp5520_exit(void)
-{
-	i2c_del_driver(&adp5520_driver);
-}
-module_exit(adp5520_exit);
+module_i2c_driver(adp5520_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("ADP5520(01) PMIC-MFD Driver");
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index b562c7bf8a46..6ab03043fd60 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -39,11 +39,21 @@ int arizona_clk32k_enable(struct arizona *arizona)
 
 	arizona->clk32k_ref++;
 
-	if (arizona->clk32k_ref == 1)
+	if (arizona->clk32k_ref == 1) {
+		switch (arizona->pdata.clk32k_src) {
+		case ARIZONA_32KZ_MCLK1:
+			ret = pm_runtime_get_sync(arizona->dev);
+			if (ret != 0)
+				goto out;
+			break;
+		}
+
 		ret = regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
 					 ARIZONA_CLK_32K_ENA,
 					 ARIZONA_CLK_32K_ENA);
+	}
 
+out:
 	if (ret != 0)
 		arizona->clk32k_ref--;
 
@@ -63,10 +73,17 @@ int arizona_clk32k_disable(struct arizona *arizona)
 
 	arizona->clk32k_ref--;
 
-	if (arizona->clk32k_ref == 0)
+	if (arizona->clk32k_ref == 0) {
 		regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
 				   ARIZONA_CLK_32K_ENA, 0);
 
+		switch (arizona->pdata.clk32k_src) {
+		case ARIZONA_32KZ_MCLK1:
+			pm_runtime_put_sync(arizona->dev);
+			break;
+		}
+	}
+
 	mutex_unlock(&arizona->clk_lock);
 
 	return ret;
@@ -179,42 +196,134 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int arizona_wait_for_boot(struct arizona *arizona)
+static int arizona_poll_reg(struct arizona *arizona,
+			    int timeout, unsigned int reg,
+			    unsigned int mask, unsigned int target)
 {
-	unsigned int reg;
+	unsigned int val = 0;
 	int ret, i;
 
+	for (i = 0; i < timeout; i++) {
+		ret = regmap_read(arizona->regmap, reg, &val);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to read reg %u: %d\n",
+				reg, ret);
+			continue;
+		}
+
+		if ((val & mask) == target)
+			return 0;
+
+		msleep(1);
+	}
+
+	dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val);
+	return -ETIMEDOUT;
+}
+
+static int arizona_wait_for_boot(struct arizona *arizona)
+{
+	int ret;
+
 	/*
 	 * We can't use an interrupt as we need to runtime resume to do so,
 	 * we won't race with the interrupt handler as it'll be blocked on
 	 * runtime resume.
 	 */
-	for (i = 0; i < 5; i++) {
-		msleep(1);
+	ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
+			       ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
 
-		ret = regmap_read(arizona->regmap,
-				  ARIZONA_INTERRUPT_RAW_STATUS_5, &reg);
-		if (ret != 0) {
-			dev_err(arizona->dev, "Failed to read boot state: %d\n",
-				ret);
-			continue;
-		}
+	if (!ret)
+		regmap_write(arizona->regmap, ARIZONA_INTERRUPT_STATUS_5,
+			     ARIZONA_BOOT_DONE_STS);
 
-		if (reg & ARIZONA_BOOT_DONE_STS)
-			break;
+	pm_runtime_mark_last_busy(arizona->dev);
+
+	return ret;
+}
+
+static int arizona_apply_hardware_patch(struct arizona* arizona)
+{
+	unsigned int fll, sysclk;
+	int ret, err;
+
+	regcache_cache_bypass(arizona->regmap, true);
+
+	/* Cache existing FLL and SYSCLK settings */
+	ret = regmap_read(arizona->regmap, ARIZONA_FLL1_CONTROL_1, &fll);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to cache FLL settings: %d\n",
+			ret);
+		return ret;
+	}
+	ret = regmap_read(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, &sysclk);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to cache SYSCLK settings: %d\n",
+			ret);
+		return ret;
 	}
 
-	if (reg & ARIZONA_BOOT_DONE_STS) {
-		regmap_write(arizona->regmap, ARIZONA_INTERRUPT_STATUS_5,
-			     ARIZONA_BOOT_DONE_STS);
-	} else {
-		dev_err(arizona->dev, "Device boot timed out: %x\n", reg);
-		return -ETIMEDOUT;
+	/* Start up SYSCLK using the FLL in free running mode */
+	ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1,
+			ARIZONA_FLL1_ENA | ARIZONA_FLL1_FREERUN);
+	if (ret != 0) {
+		dev_err(arizona->dev,
+			"Failed to start FLL in freerunning mode: %d\n",
+			ret);
+		return ret;
+	}
+	ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
+			       ARIZONA_FLL1_CLOCK_OK_STS,
+			       ARIZONA_FLL1_CLOCK_OK_STS);
+	if (ret != 0) {
+		ret = -ETIMEDOUT;
+		goto err_fll;
 	}
 
-	pm_runtime_mark_last_busy(arizona->dev);
+	ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, 0x0144);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to start SYSCLK: %d\n", ret);
+		goto err_fll;
+	}
 
-	return 0;
+	/* Start the write sequencer and wait for it to finish */
+	ret = regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
+			ARIZONA_WSEQ_ENA | ARIZONA_WSEQ_START | 160);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to start write sequencer: %d\n",
+			ret);
+		goto err_sysclk;
+	}
+	ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
+			       ARIZONA_WSEQ_BUSY, 0);
+	if (ret != 0) {
+		regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
+				ARIZONA_WSEQ_ABORT);
+		ret = -ETIMEDOUT;
+	}
+
+err_sysclk:
+	err = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, sysclk);
+	if (err != 0) {
+		dev_err(arizona->dev,
+			"Failed to re-apply old SYSCLK settings: %d\n",
+			err);
+	}
+
+err_fll:
+	err = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, fll);
+	if (err != 0) {
+		dev_err(arizona->dev,
+			"Failed to re-apply old FLL settings: %d\n",
+			err);
+	}
+
+	regcache_cache_bypass(arizona->regmap, false);
+
+	if (ret != 0)
+		return ret;
+	else
+		return err;
 }
 
 #ifdef CONFIG_PM_RUNTIME
@@ -233,20 +342,44 @@ static int arizona_runtime_resume(struct device *dev)
 
 	regcache_cache_only(arizona->regmap, false);
 
-	ret = arizona_wait_for_boot(arizona);
-	if (ret != 0) {
-		regulator_disable(arizona->dcvdd);
-		return ret;
+	switch (arizona->type) {
+	case WM5102:
+		ret = wm5102_patch(arizona);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to apply patch: %d\n",
+				ret);
+			goto err;
+		}
+
+		ret = arizona_apply_hardware_patch(arizona);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to apply hardware patch: %d\n",
+				ret);
+			goto err;
+		}
+		break;
+	default:
+		ret = arizona_wait_for_boot(arizona);
+		if (ret != 0) {
+			goto err;
+		}
+
+		break;
 	}
 
 	ret = regcache_sync(arizona->regmap);
 	if (ret != 0) {
 		dev_err(arizona->dev, "Failed to restore register cache\n");
-		regulator_disable(arizona->dcvdd);
-		return ret;
+		goto err;
 	}
 
 	return 0;
+
+err:
+	regcache_cache_only(arizona->regmap, true);
+	regulator_disable(arizona->dcvdd);
+	return ret;
 }
 
 static int arizona_runtime_suspend(struct device *dev)
@@ -371,6 +504,17 @@ int arizona_dev_init(struct arizona *arizona)
 		goto err_early;
 	}
 
+	if (arizona->pdata.reset) {
+		/* Start out with /RESET low to put the chip into reset */
+		ret = gpio_request_one(arizona->pdata.reset,
+				       GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+				       "arizona /RESET");
+		if (ret != 0) {
+			dev_err(dev, "Failed to request /RESET: %d\n", ret);
+			goto err_early;
+		}
+	}
+
 	ret = regulator_bulk_enable(arizona->num_core_supplies,
 				    arizona->core_supplies);
 	if (ret != 0) {
@@ -386,16 +530,8 @@ int arizona_dev_init(struct arizona *arizona)
 	}
 
 	if (arizona->pdata.reset) {
-		/* Start out with /RESET low to put the chip into reset */
-		ret = gpio_request_one(arizona->pdata.reset,
-				       GPIOF_DIR_OUT | GPIOF_INIT_LOW,
-				       "arizona /RESET");
-		if (ret != 0) {
-			dev_err(dev, "Failed to request /RESET: %d\n", ret);
-			goto err_dcvdd;
-		}
-
 		gpio_set_value_cansleep(arizona->pdata.reset, 1);
+		msleep(1);
 	}
 
 	regcache_cache_only(arizona->regmap, false);
@@ -424,6 +560,7 @@ int arizona_dev_init(struct arizona *arizona)
 			arizona->type = WM5102;
 		}
 		apply_patch = wm5102_patch;
+		arizona->rev &= 0x7;
 		break;
 #endif
 #ifdef CONFIG_MFD_WM5110
@@ -454,6 +591,8 @@ int arizona_dev_init(struct arizona *arizona)
 			goto err_reset;
 		}
 
+		msleep(1);
+
 		ret = regcache_sync(arizona->regmap);
 		if (ret != 0) {
 			dev_err(dev, "Failed to sync device: %d\n", ret);
@@ -461,10 +600,24 @@ int arizona_dev_init(struct arizona *arizona)
 		}
 	}
 
-	ret = arizona_wait_for_boot(arizona);
-	if (ret != 0) {
-		dev_err(arizona->dev, "Device failed initial boot: %d\n", ret);
-		goto err_reset;
+	switch (arizona->type) {
+	case WM5102:
+		ret = regmap_read(arizona->regmap, 0x19, &val);
+		if (ret != 0)
+			dev_err(dev,
+				"Failed to check write sequencer state: %d\n",
+				ret);
+		else if (val & 0x01)
+			break;
+		/* Fall through */
+	default:
+		ret = arizona_wait_for_boot(arizona);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Device failed initial boot: %d\n", ret);
+			goto err_reset;
+		}
+		break;
 	}
 
 	if (apply_patch) {
@@ -474,6 +627,20 @@ int arizona_dev_init(struct arizona *arizona)
 				ret);
 			goto err_reset;
 		}
+
+		switch (arizona->type) {
+		case WM5102:
+			ret = arizona_apply_hardware_patch(arizona);
+			if (ret != 0) {
+				dev_err(arizona->dev,
+					"Failed to apply hardware patch: %d\n",
+					ret);
+				goto err_reset;
+			}
+			break;
+		default:
+			break;
+		}
 	}
 
 	for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
@@ -498,6 +665,7 @@ int arizona_dev_init(struct arizona *arizona)
 		regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
 				   ARIZONA_CLK_32K_SRC_MASK,
 				   arizona->pdata.clk32k_src - 1);
+		arizona_clk32k_enable(arizona);
 		break;
 	case ARIZONA_32KZ_NONE:
 		regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
@@ -511,10 +679,16 @@ int arizona_dev_init(struct arizona *arizona)
 	}
 
 	for (i = 0; i < ARIZONA_MAX_MICBIAS; i++) {
-		if (!arizona->pdata.micbias[i].mV)
+		if (!arizona->pdata.micbias[i].mV &&
+		    !arizona->pdata.micbias[i].bypass)
 			continue;
 
+		/* Apply default for bypass mode */
+		if (!arizona->pdata.micbias[i].mV)
+			arizona->pdata.micbias[i].mV = 2800;
+
 		val = (arizona->pdata.micbias[i].mV - 1500) / 100;
+
 		val <<= ARIZONA_MICB1_LVL_SHIFT;
 
 		if (arizona->pdata.micbias[i].ext_cap)
@@ -526,10 +700,14 @@ int arizona_dev_init(struct arizona *arizona)
 		if (arizona->pdata.micbias[i].fast_start)
 			val |= ARIZONA_MICB1_RATE;
 
+		if (arizona->pdata.micbias[i].bypass)
+			val |= ARIZONA_MICB1_BYPASS;
+
 		regmap_update_bits(arizona->regmap,
 				   ARIZONA_MIC_BIAS_CTRL_1 + i,
 				   ARIZONA_MICB1_LVL_MASK |
 				   ARIZONA_MICB1_DISCH |
+				   ARIZONA_MICB1_BYPASS |
 				   ARIZONA_MICB1_RATE, val);
 	}
 
@@ -610,10 +788,9 @@ err_irq:
 	arizona_irq_exit(arizona);
 err_reset:
 	if (arizona->pdata.reset) {
-		gpio_set_value_cansleep(arizona->pdata.reset, 1);
+		gpio_set_value_cansleep(arizona->pdata.reset, 0);
 		gpio_free(arizona->pdata.reset);
 	}
-err_dcvdd:
 	regulator_disable(arizona->dcvdd);
 err_enable:
 	regulator_bulk_disable(arizona->num_core_supplies,
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 2bec5f0db3ee..64cd9b6dac92 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -94,6 +94,7 @@ static irqreturn_t arizona_ctrlif_err(int irq, void *data)
 static irqreturn_t arizona_irq_thread(int irq, void *data)
 {
 	struct arizona *arizona = data;
+	bool poll;
 	unsigned int val;
 	int ret;
 
@@ -103,20 +104,39 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
 		return IRQ_NONE;
 	}
 
-	/* Always handle the AoD domain */
-	handle_nested_irq(irq_find_mapping(arizona->virq, 0));
+	do {
+		poll = false;
+
+		/* Always handle the AoD domain */
+		handle_nested_irq(irq_find_mapping(arizona->virq, 0));
+
+		/*
+		 * Check if one of the main interrupts is asserted and only
+		 * check that domain if it is.
+		 */
+		ret = regmap_read(arizona->regmap, ARIZONA_IRQ_PIN_STATUS,
+				  &val);
+		if (ret == 0 && val & ARIZONA_IRQ1_STS) {
+			handle_nested_irq(irq_find_mapping(arizona->virq, 1));
+		} else if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to read main IRQ status: %d\n", ret);
+		}
 
-	/*
-	 * Check if one of the main interrupts is asserted and only
-	 * check that domain if it is.
-	 */
-	ret = regmap_read(arizona->regmap, ARIZONA_IRQ_PIN_STATUS, &val);
-	if (ret == 0 && val & ARIZONA_IRQ1_STS) {
-		handle_nested_irq(irq_find_mapping(arizona->virq, 1));
-	} else if (ret != 0) {
-		dev_err(arizona->dev, "Failed to read main IRQ status: %d\n",
-			ret);
-	}
+		/*
+		 * Poll the IRQ pin status to see if we're really done
+		 * if the interrupt controller can't do it for us.
+		 */
+		if (!arizona->pdata.irq_gpio) {
+			break;
+		} else if (arizona->pdata.irq_flags & IRQF_TRIGGER_RISING &&
+			   gpio_get_value_cansleep(arizona->pdata.irq_gpio)) {
+			poll = true;
+		} else if (arizona->pdata.irq_flags & IRQF_TRIGGER_FALLING &&
+			   !gpio_get_value_cansleep(arizona->pdata.irq_gpio)) {
+			poll = true;
+		}
+	} while (poll);
 
 	pm_runtime_mark_last_busy(arizona->dev);
 	pm_runtime_put_autosuspend(arizona->dev);
@@ -169,6 +189,7 @@ int arizona_irq_init(struct arizona *arizona)
 	int ret, i;
 	const struct regmap_irq_chip *aod, *irq;
 	bool ctrlif_error = true;
+	struct irq_data *irq_data;
 
 	switch (arizona->type) {
 #ifdef CONFIG_MFD_WM5102
@@ -192,7 +213,36 @@ int arizona_irq_init(struct arizona *arizona)
 		return -EINVAL;
 	}
 
-	if (arizona->pdata.irq_active_high) {
+	/* Disable all wake sources by default */
+	regmap_write(arizona->regmap, ARIZONA_WAKE_CONTROL, 0);
+
+	/* Read the flags from the interrupt controller if not specified */
+	if (!arizona->pdata.irq_flags) {
+		irq_data = irq_get_irq_data(arizona->irq);
+		if (!irq_data) {
+			dev_err(arizona->dev, "Invalid IRQ: %d\n",
+				arizona->irq);
+			return -EINVAL;
+		}
+
+		arizona->pdata.irq_flags = irqd_get_trigger_type(irq_data);
+		switch (arizona->pdata.irq_flags) {
+		case IRQF_TRIGGER_LOW:
+		case IRQF_TRIGGER_HIGH:
+		case IRQF_TRIGGER_RISING:
+		case IRQF_TRIGGER_FALLING:
+			break;
+
+		case IRQ_TYPE_NONE:
+		default:
+			/* Device default */
+			arizona->pdata.irq_flags = IRQF_TRIGGER_LOW;
+			break;
+		}
+	}
+
+	if (arizona->pdata.irq_flags & (IRQF_TRIGGER_HIGH |
+					IRQF_TRIGGER_RISING)) {
 		ret = regmap_update_bits(arizona->regmap, ARIZONA_IRQ_CTRL_1,
 					 ARIZONA_IRQ_POL, 0);
 		if (ret != 0) {
@@ -200,12 +250,10 @@ int arizona_irq_init(struct arizona *arizona)
 				ret);
 			goto err;
 		}
-
-		flags |= IRQF_TRIGGER_HIGH;
-	} else {
-		flags |= IRQF_TRIGGER_LOW;
 	}
 
+	flags |= arizona->pdata.irq_flags;
+
 	/* Allocate a virtual IRQ domain to distribute to the regmap domains */
 	arizona->virq = irq_domain_add_linear(NULL, 2, &arizona_domain_ops,
 					      arizona);
@@ -257,11 +305,31 @@ int arizona_irq_init(struct arizona *arizona)
 		}
 	}
 
+	/* Used to emulate edge trigger and to work around broken pinmux */
+	if (arizona->pdata.irq_gpio) {
+		if (gpio_to_irq(arizona->pdata.irq_gpio) != arizona->irq) {
+			dev_warn(arizona->dev, "IRQ %d is not GPIO %d (%d)\n",
+				 arizona->irq, arizona->pdata.irq_gpio,
+				 gpio_to_irq(arizona->pdata.irq_gpio));
+			arizona->irq = gpio_to_irq(arizona->pdata.irq_gpio);
+		}
+
+		ret = devm_gpio_request_one(arizona->dev,
+					    arizona->pdata.irq_gpio,
+					    GPIOF_IN, "arizona IRQ");
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to request IRQ GPIO %d:: %d\n",
+				arizona->pdata.irq_gpio, ret);
+			arizona->pdata.irq_gpio = 0;
+		}
+	}
+
 	ret = request_threaded_irq(arizona->irq, NULL, arizona_irq_thread,
 				   flags, "arizona", arizona);
 
 	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to request IRQ %d: %d\n",
+		dev_err(arizona->dev, "Failed to request primary IRQ %d: %d\n",
 			arizona->irq, ret);
 		goto err_main_irq;
 	}
diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
index 1b9fdd698b03..b57e642d2b4a 100644
--- a/drivers/mfd/arizona-spi.c
+++ b/drivers/mfd/arizona-spi.c
@@ -67,7 +67,7 @@ static int arizona_spi_probe(struct spi_device *spi)
 
 static int arizona_spi_remove(struct spi_device *spi)
 {
-	struct arizona *arizona = dev_get_drvdata(&spi->dev);
+	struct arizona *arizona = spi_get_drvdata(spi);
 	arizona_dev_exit(arizona);
 	return 0;
 }
diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c
index e994c9691124..01e414162702 100644
--- a/drivers/mfd/as3711.c
+++ b/drivers/mfd/as3711.c
@@ -112,16 +112,34 @@ static const struct regmap_config as3711_regmap_config = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
+#ifdef CONFIG_OF
+static struct of_device_id as3711_of_match[] = {
+	{.compatible = "ams,as3711",},
+	{}
+};
+MODULE_DEVICE_TABLE(of, as3711_of_match);
+#endif
+
 static int as3711_i2c_probe(struct i2c_client *client,
 			    const struct i2c_device_id *id)
 {
 	struct as3711 *as3711;
-	struct as3711_platform_data *pdata = client->dev.platform_data;
+	struct as3711_platform_data *pdata;
 	unsigned int id1, id2;
 	int ret;
 
-	if (!pdata)
-		dev_dbg(&client->dev, "Platform data not found\n");
+	if (!client->dev.of_node) {
+		pdata = client->dev.platform_data;
+		if (!pdata)
+			dev_dbg(&client->dev, "Platform data not found\n");
+	} else {
+		pdata = devm_kzalloc(&client->dev,
+				     sizeof(*pdata), GFP_KERNEL);
+		if (!pdata) {
+			dev_err(&client->dev, "Failed to allocate pdata\n");
+			return -ENOMEM;
+		}
+	}
 
 	as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL);
 	if (!as3711) {
@@ -193,7 +211,8 @@ static struct i2c_driver as3711_i2c_driver = {
 	.driver = {
 		   .name = "as3711",
 		   .owner = THIS_MODULE,
-		   },
+		   .of_match_table = of_match_ptr(as3711_of_match),
+	},
 	.probe = as3711_i2c_probe,
 	.remove = as3711_i2c_remove,
 	.id_table = as3711_i2c_id,
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
new file mode 100644
index 000000000000..10cd14e35eb0
--- /dev/null
+++ b/drivers/mfd/cros_ec.c
@@ -0,0 +1,196 @@
+/*
+ * ChromeOS EC multi-function device
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * The ChromeOS EC multi function device is used to mux all the requests
+ * to the EC device for its multiple features: keyboard controller,
+ * battery charging and regulator control, firmware update.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+
+int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
+		       struct cros_ec_msg *msg)
+{
+	uint8_t *out;
+	int csum, i;
+
+	BUG_ON(msg->out_len > EC_HOST_PARAM_SIZE);
+	out = ec_dev->dout;
+	out[0] = EC_CMD_VERSION0 + msg->version;
+	out[1] = msg->cmd;
+	out[2] = msg->out_len;
+	csum = out[0] + out[1] + out[2];
+	for (i = 0; i < msg->out_len; i++)
+		csum += out[EC_MSG_TX_HEADER_BYTES + i] = msg->out_buf[i];
+	out[EC_MSG_TX_HEADER_BYTES + msg->out_len] = (uint8_t)(csum & 0xff);
+
+	return EC_MSG_TX_PROTO_BYTES + msg->out_len;
+}
+EXPORT_SYMBOL(cros_ec_prepare_tx);
+
+static int cros_ec_command_sendrecv(struct cros_ec_device *ec_dev,
+		uint16_t cmd, void *out_buf, int out_len,
+		void *in_buf, int in_len)
+{
+	struct cros_ec_msg msg;
+
+	msg.version = cmd >> 8;
+	msg.cmd = cmd & 0xff;
+	msg.out_buf = out_buf;
+	msg.out_len = out_len;
+	msg.in_buf = in_buf;
+	msg.in_len = in_len;
+
+	return ec_dev->command_xfer(ec_dev, &msg);
+}
+
+static int cros_ec_command_recv(struct cros_ec_device *ec_dev,
+		uint16_t cmd, void *buf, int buf_len)
+{
+	return cros_ec_command_sendrecv(ec_dev, cmd, NULL, 0, buf, buf_len);
+}
+
+static int cros_ec_command_send(struct cros_ec_device *ec_dev,
+		uint16_t cmd, void *buf, int buf_len)
+{
+	return cros_ec_command_sendrecv(ec_dev, cmd, buf, buf_len, NULL, 0);
+}
+
+static irqreturn_t ec_irq_thread(int irq, void *data)
+{
+	struct cros_ec_device *ec_dev = data;
+
+	if (device_may_wakeup(ec_dev->dev))
+		pm_wakeup_event(ec_dev->dev, 0);
+
+	blocking_notifier_call_chain(&ec_dev->event_notifier, 1, ec_dev);
+
+	return IRQ_HANDLED;
+}
+
+static struct mfd_cell cros_devs[] = {
+	{
+		.name = "cros-ec-keyb",
+		.id = 1,
+		.of_compatible = "google,cros-ec-keyb",
+	},
+};
+
+int cros_ec_register(struct cros_ec_device *ec_dev)
+{
+	struct device *dev = ec_dev->dev;
+	int err = 0;
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&ec_dev->event_notifier);
+
+	ec_dev->command_send = cros_ec_command_send;
+	ec_dev->command_recv = cros_ec_command_recv;
+	ec_dev->command_sendrecv = cros_ec_command_sendrecv;
+
+	if (ec_dev->din_size) {
+		ec_dev->din = kmalloc(ec_dev->din_size, GFP_KERNEL);
+		if (!ec_dev->din) {
+			err = -ENOMEM;
+			goto fail_din;
+		}
+	}
+	if (ec_dev->dout_size) {
+		ec_dev->dout = kmalloc(ec_dev->dout_size, GFP_KERNEL);
+		if (!ec_dev->dout) {
+			err = -ENOMEM;
+			goto fail_dout;
+		}
+	}
+
+	if (!ec_dev->irq) {
+		dev_dbg(dev, "no valid IRQ: %d\n", ec_dev->irq);
+		goto fail_irq;
+	}
+
+	err = request_threaded_irq(ec_dev->irq, NULL, ec_irq_thread,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   "chromeos-ec", ec_dev);
+	if (err) {
+		dev_err(dev, "request irq %d: error %d\n", ec_dev->irq, err);
+		goto fail_irq;
+	}
+
+	err = mfd_add_devices(dev, 0, cros_devs,
+			      ARRAY_SIZE(cros_devs),
+			      NULL, ec_dev->irq, NULL);
+	if (err) {
+		dev_err(dev, "failed to add mfd devices\n");
+		goto fail_mfd;
+	}
+
+	dev_info(dev, "Chrome EC (%s)\n", ec_dev->name);
+
+	return 0;
+
+fail_mfd:
+	free_irq(ec_dev->irq, ec_dev);
+fail_irq:
+	kfree(ec_dev->dout);
+fail_dout:
+	kfree(ec_dev->din);
+fail_din:
+	return err;
+}
+EXPORT_SYMBOL(cros_ec_register);
+
+int cros_ec_remove(struct cros_ec_device *ec_dev)
+{
+	mfd_remove_devices(ec_dev->dev);
+	free_irq(ec_dev->irq, ec_dev);
+	kfree(ec_dev->dout);
+	kfree(ec_dev->din);
+
+	return 0;
+}
+EXPORT_SYMBOL(cros_ec_remove);
+
+#ifdef CONFIG_PM_SLEEP
+int cros_ec_suspend(struct cros_ec_device *ec_dev)
+{
+	struct device *dev = ec_dev->dev;
+
+	if (device_may_wakeup(dev))
+		ec_dev->wake_enabled = !enable_irq_wake(ec_dev->irq);
+
+	disable_irq(ec_dev->irq);
+	ec_dev->was_wake_device = ec_dev->wake_enabled;
+
+	return 0;
+}
+EXPORT_SYMBOL(cros_ec_suspend);
+
+int cros_ec_resume(struct cros_ec_device *ec_dev)
+{
+	enable_irq(ec_dev->irq);
+
+	if (ec_dev->wake_enabled) {
+		disable_irq_wake(ec_dev->irq);
+		ec_dev->wake_enabled = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(cros_ec_resume);
+
+#endif
diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
new file mode 100644
index 000000000000..123044608b63
--- /dev/null
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -0,0 +1,201 @@
+/*
+ * ChromeOS EC multi-function device (I2C)
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+static inline struct cros_ec_device *to_ec_dev(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_get_clientdata(client);
+}
+
+static int cros_ec_command_xfer(struct cros_ec_device *ec_dev,
+				struct cros_ec_msg *msg)
+{
+	struct i2c_client *client = ec_dev->priv;
+	int ret = -ENOMEM;
+	int i;
+	int packet_len;
+	u8 *out_buf = NULL;
+	u8 *in_buf = NULL;
+	u8 sum;
+	struct i2c_msg i2c_msg[2];
+
+	i2c_msg[0].addr = client->addr;
+	i2c_msg[0].flags = 0;
+	i2c_msg[1].addr = client->addr;
+	i2c_msg[1].flags = I2C_M_RD;
+
+	/*
+	 * allocate larger packet (one byte for checksum, one byte for
+	 * length, and one for result code)
+	 */
+	packet_len = msg->in_len + 3;
+	in_buf = kzalloc(packet_len, GFP_KERNEL);
+	if (!in_buf)
+		goto done;
+	i2c_msg[1].len = packet_len;
+	i2c_msg[1].buf = (char *)in_buf;
+
+	/*
+	 * allocate larger packet (one byte for checksum, one for
+	 * command code, one for length, and one for command version)
+	 */
+	packet_len = msg->out_len + 4;
+	out_buf = kzalloc(packet_len, GFP_KERNEL);
+	if (!out_buf)
+		goto done;
+	i2c_msg[0].len = packet_len;
+	i2c_msg[0].buf = (char *)out_buf;
+
+	out_buf[0] = EC_CMD_VERSION0 + msg->version;
+	out_buf[1] = msg->cmd;
+	out_buf[2] = msg->out_len;
+
+	/* copy message payload and compute checksum */
+	sum = out_buf[0] + out_buf[1] + out_buf[2];
+	for (i = 0; i < msg->out_len; i++) {
+		out_buf[3 + i] = msg->out_buf[i];
+		sum += out_buf[3 + i];
+	}
+	out_buf[3 + msg->out_len] = sum;
+
+	/* send command to EC and read answer */
+	ret = i2c_transfer(client->adapter, i2c_msg, 2);
+	if (ret < 0) {
+		dev_err(ec_dev->dev, "i2c transfer failed: %d\n", ret);
+		goto done;
+	} else if (ret != 2) {
+		dev_err(ec_dev->dev, "failed to get response: %d\n", ret);
+		ret = -EIO;
+		goto done;
+	}
+
+	/* check response error code */
+	if (i2c_msg[1].buf[0]) {
+		dev_warn(ec_dev->dev, "command 0x%02x returned an error %d\n",
+			 msg->cmd, i2c_msg[1].buf[0]);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	/* copy response packet payload and compute checksum */
+	sum = in_buf[0] + in_buf[1];
+	for (i = 0; i < msg->in_len; i++) {
+		msg->in_buf[i] = in_buf[2 + i];
+		sum += in_buf[2 + i];
+	}
+	dev_dbg(ec_dev->dev, "packet: %*ph, sum = %02x\n",
+		i2c_msg[1].len, in_buf, sum);
+	if (sum != in_buf[2 + msg->in_len]) {
+		dev_err(ec_dev->dev, "bad packet checksum\n");
+		ret = -EBADMSG;
+		goto done;
+	}
+
+	ret = 0;
+ done:
+	kfree(in_buf);
+	kfree(out_buf);
+	return ret;
+}
+
+static int cros_ec_probe_i2c(struct i2c_client *client,
+			     const struct i2c_device_id *dev_id)
+{
+	struct device *dev = &client->dev;
+	struct cros_ec_device *ec_dev = NULL;
+	int err;
+
+ 	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
+	if (!ec_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, ec_dev);
+	ec_dev->name = "I2C";
+	ec_dev->dev = dev;
+	ec_dev->priv = client;
+	ec_dev->irq = client->irq;
+	ec_dev->command_xfer = cros_ec_command_xfer;
+	ec_dev->ec_name = client->name;
+	ec_dev->phys_name = client->adapter->name;
+	ec_dev->parent = &client->dev;
+
+	err = cros_ec_register(ec_dev);
+	if (err) {
+		dev_err(dev, "cannot register EC\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int cros_ec_remove_i2c(struct i2c_client *client)
+{
+	struct cros_ec_device *ec_dev = i2c_get_clientdata(client);
+
+	cros_ec_remove(ec_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_ec_i2c_suspend(struct device *dev)
+{
+	struct cros_ec_device *ec_dev = to_ec_dev(dev);
+
+	return cros_ec_suspend(ec_dev);
+}
+
+static int cros_ec_i2c_resume(struct device *dev)
+{
+	struct cros_ec_device *ec_dev = to_ec_dev(dev);
+
+	return cros_ec_resume(ec_dev);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_i2c_pm_ops, cros_ec_i2c_suspend,
+			  cros_ec_i2c_resume);
+
+static const struct i2c_device_id cros_ec_i2c_id[] = {
+	{ "cros-ec-i2c", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cros_ec_i2c_id);
+
+static struct i2c_driver cros_ec_driver = {
+	.driver	= {
+		.name	= "cros-ec-i2c",
+		.owner	= THIS_MODULE,
+		.pm	= &cros_ec_i2c_pm_ops,
+	},
+	.probe		= cros_ec_probe_i2c,
+	.remove		= cros_ec_remove_i2c,
+	.id_table	= cros_ec_i2c_id,
+};
+
+module_i2c_driver(cros_ec_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC multi function device");
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
new file mode 100644
index 000000000000..19193cf1e7a1
--- /dev/null
+++ b/drivers/mfd/cros_ec_spi.c
@@ -0,0 +1,375 @@
+/*
+ * ChromeOS EC multi-function device (SPI)
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+
+/* The header byte, which follows the preamble */
+#define EC_MSG_HEADER			0xec
+
+/*
+ * Number of EC preamble bytes we read at a time. Since it takes
+ * about 400-500us for the EC to respond there is not a lot of
+ * point in tuning this. If the EC could respond faster then
+ * we could increase this so that might expect the preamble and
+ * message to occur in a single transaction. However, the maximum
+ * SPI transfer size is 256 bytes, so at 5MHz we need a response
+ * time of perhaps <320us (200 bytes / 1600 bits).
+ */
+#define EC_MSG_PREAMBLE_COUNT		32
+
+/*
+  * We must get a response from the EC in 5ms. This is a very long
+  * time, but the flash write command can take 2-3ms. The EC command
+  * processing is currently not very fast (about 500us). We could
+  * look at speeding this up and making the flash write command a
+  * 'slow' command, requiring a GET_STATUS wait loop, like flash
+  * erase.
+  */
+#define EC_MSG_DEADLINE_MS		5
+
+/*
+  * Time between raising the SPI chip select (for the end of a
+  * transaction) and dropping it again (for the next transaction).
+  * If we go too fast, the EC will miss the transaction. It seems
+  * that 50us is enough with the 16MHz STM32 EC.
+  */
+#define EC_SPI_RECOVERY_TIME_NS	(50 * 1000)
+
+/**
+ * struct cros_ec_spi - information about a SPI-connected EC
+ *
+ * @spi: SPI device we are connected to
+ * @last_transfer_ns: time that we last finished a transfer, or 0 if there
+ *	if no record
+ */
+struct cros_ec_spi {
+	struct spi_device *spi;
+	s64 last_transfer_ns;
+};
+
+static void debug_packet(struct device *dev, const char *name, u8 *ptr,
+			  int len)
+{
+#ifdef DEBUG
+	int i;
+
+	dev_dbg(dev, "%s: ", name);
+	for (i = 0; i < len; i++)
+		dev_cont(dev, " %02x", ptr[i]);
+#endif
+}
+
+/**
+ * cros_ec_spi_receive_response - Receive a response from the EC.
+ *
+ * This function has two phases: reading the preamble bytes (since if we read
+ * data from the EC before it is ready to send, we just get preamble) and
+ * reading the actual message.
+ *
+ * The received data is placed into ec_dev->din.
+ *
+ * @ec_dev: ChromeOS EC device
+ * @need_len: Number of message bytes we need to read
+ */
+static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
+					int need_len)
+{
+	struct cros_ec_spi *ec_spi = ec_dev->priv;
+	struct spi_transfer trans;
+	struct spi_message msg;
+	u8 *ptr, *end;
+	int ret;
+	unsigned long deadline;
+	int todo;
+
+	/* Receive data until we see the header byte */
+	deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
+	do {
+		memset(&trans, '\0', sizeof(trans));
+		trans.cs_change = 1;
+		trans.rx_buf = ptr = ec_dev->din;
+		trans.len = EC_MSG_PREAMBLE_COUNT;
+
+		spi_message_init(&msg);
+		spi_message_add_tail(&trans, &msg);
+		ret = spi_sync(ec_spi->spi, &msg);
+		if (ret < 0) {
+			dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+			return ret;
+		}
+
+		for (end = ptr + EC_MSG_PREAMBLE_COUNT; ptr != end; ptr++) {
+			if (*ptr == EC_MSG_HEADER) {
+				dev_dbg(ec_dev->dev, "msg found at %ld\n",
+					ptr - ec_dev->din);
+				break;
+			}
+		}
+
+		if (time_after(jiffies, deadline)) {
+			dev_warn(ec_dev->dev, "EC failed to respond in time\n");
+			return -ETIMEDOUT;
+		}
+	} while (ptr == end);
+
+	/*
+	 * ptr now points to the header byte. Copy any valid data to the
+	 * start of our buffer
+	 */
+	todo = end - ++ptr;
+	BUG_ON(todo < 0 || todo > ec_dev->din_size);
+	todo = min(todo, need_len);
+	memmove(ec_dev->din, ptr, todo);
+	ptr = ec_dev->din + todo;
+	dev_dbg(ec_dev->dev, "need %d, got %d bytes from preamble\n",
+		 need_len, todo);
+	need_len -= todo;
+
+	/* Receive data until we have it all */
+	while (need_len > 0) {
+		/*
+		 * We can't support transfers larger than the SPI FIFO size
+		 * unless we have DMA. We don't have DMA on the ISP SPI ports
+		 * for Exynos. We need a way of asking SPI driver for
+		 * maximum-supported transfer size.
+		 */
+		todo = min(need_len, 256);
+		dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%ld\n",
+			todo, need_len, ptr - ec_dev->din);
+
+		memset(&trans, '\0', sizeof(trans));
+		trans.cs_change = 1;
+		trans.rx_buf = ptr;
+		trans.len = todo;
+		spi_message_init(&msg);
+		spi_message_add_tail(&trans, &msg);
+
+		/* send command to EC and read answer */
+		BUG_ON((u8 *)trans.rx_buf - ec_dev->din + todo >
+				ec_dev->din_size);
+		ret = spi_sync(ec_spi->spi, &msg);
+		if (ret < 0) {
+			dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+			return ret;
+		}
+
+		debug_packet(ec_dev->dev, "interim", ptr, todo);
+		ptr += todo;
+		need_len -= todo;
+	}
+
+	dev_dbg(ec_dev->dev, "loop done, ptr=%ld\n", ptr - ec_dev->din);
+
+	return 0;
+}
+
+/**
+ * cros_ec_command_spi_xfer - Transfer a message over SPI and receive the reply
+ *
+ * @ec_dev: ChromeOS EC device
+ * @ec_msg: Message to transfer
+ */
+static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
+				    struct cros_ec_msg *ec_msg)
+{
+	struct cros_ec_spi *ec_spi = ec_dev->priv;
+	struct spi_transfer trans;
+	struct spi_message msg;
+	int i, len;
+	u8 *ptr;
+	int sum;
+	int ret = 0, final_ret;
+	struct timespec ts;
+
+	len = cros_ec_prepare_tx(ec_dev, ec_msg);
+	dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
+
+	/* If it's too soon to do another transaction, wait */
+	if (ec_spi->last_transfer_ns) {
+		struct timespec ts;
+		unsigned long delay;	/* The delay completed so far */
+
+		ktime_get_ts(&ts);
+		delay = timespec_to_ns(&ts) - ec_spi->last_transfer_ns;
+		if (delay < EC_SPI_RECOVERY_TIME_NS)
+			ndelay(delay);
+	}
+
+	/* Transmit phase - send our message */
+	debug_packet(ec_dev->dev, "out", ec_dev->dout, len);
+	memset(&trans, '\0', sizeof(trans));
+	trans.tx_buf = ec_dev->dout;
+	trans.len = len;
+	trans.cs_change = 1;
+	spi_message_init(&msg);
+	spi_message_add_tail(&trans, &msg);
+	ret = spi_sync(ec_spi->spi, &msg);
+
+	/* Get the response */
+	if (!ret) {
+		ret = cros_ec_spi_receive_response(ec_dev,
+				ec_msg->in_len + EC_MSG_TX_PROTO_BYTES);
+	} else {
+		dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+	}
+
+	/* turn off CS */
+	spi_message_init(&msg);
+	final_ret = spi_sync(ec_spi->spi, &msg);
+	ktime_get_ts(&ts);
+	ec_spi->last_transfer_ns = timespec_to_ns(&ts);
+	if (!ret)
+		ret = final_ret;
+	if (ret < 0) {
+		dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+		return ret;
+	}
+
+	/* check response error code */
+	ptr = ec_dev->din;
+	if (ptr[0]) {
+		dev_warn(ec_dev->dev, "command 0x%02x returned an error %d\n",
+			 ec_msg->cmd, ptr[0]);
+		debug_packet(ec_dev->dev, "in_err", ptr, len);
+		return -EINVAL;
+	}
+	len = ptr[1];
+	sum = ptr[0] + ptr[1];
+	if (len > ec_msg->in_len) {
+		dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
+			len, ec_msg->in_len);
+		return -ENOSPC;
+	}
+
+	/* copy response packet payload and compute checksum */
+	for (i = 0; i < len; i++) {
+		sum += ptr[i + 2];
+		if (ec_msg->in_len)
+			ec_msg->in_buf[i] = ptr[i + 2];
+	}
+	sum &= 0xff;
+
+	debug_packet(ec_dev->dev, "in", ptr, len + 3);
+
+	if (sum != ptr[len + 2]) {
+		dev_err(ec_dev->dev,
+			"bad packet checksum, expected %02x, got %02x\n",
+			sum, ptr[len + 2]);
+		return -EBADMSG;
+	}
+
+	return 0;
+}
+
+static int cros_ec_probe_spi(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct cros_ec_device *ec_dev;
+	struct cros_ec_spi *ec_spi;
+	int err;
+
+	spi->bits_per_word = 8;
+	spi->mode = SPI_MODE_0;
+	err = spi_setup(spi);
+	if (err < 0)
+		return err;
+
+	ec_spi = devm_kzalloc(dev, sizeof(*ec_spi), GFP_KERNEL);
+	if (ec_spi == NULL)
+		return -ENOMEM;
+	ec_spi->spi = spi;
+	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
+	if (!ec_dev)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, ec_dev);
+	ec_dev->name = "SPI";
+	ec_dev->dev = dev;
+	ec_dev->priv = ec_spi;
+	ec_dev->irq = spi->irq;
+	ec_dev->command_xfer = cros_ec_command_spi_xfer;
+	ec_dev->ec_name = ec_spi->spi->modalias;
+	ec_dev->phys_name = dev_name(&ec_spi->spi->dev);
+	ec_dev->parent = &ec_spi->spi->dev;
+	ec_dev->din_size = EC_MSG_BYTES + EC_MSG_PREAMBLE_COUNT;
+	ec_dev->dout_size = EC_MSG_BYTES;
+
+	err = cros_ec_register(ec_dev);
+	if (err) {
+		dev_err(dev, "cannot register EC\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int cros_ec_remove_spi(struct spi_device *spi)
+{
+	struct cros_ec_device *ec_dev;
+
+	ec_dev = spi_get_drvdata(spi);
+	cros_ec_remove(ec_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_ec_spi_suspend(struct device *dev)
+{
+	struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
+
+	return cros_ec_suspend(ec_dev);
+}
+
+static int cros_ec_spi_resume(struct device *dev)
+{
+	struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
+
+	return cros_ec_resume(ec_dev);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_spi_pm_ops, cros_ec_spi_suspend,
+			 cros_ec_spi_resume);
+
+static const struct spi_device_id cros_ec_spi_id[] = {
+	{ "cros-ec-spi", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, cros_ec_spi_id);
+
+static struct spi_driver cros_ec_driver_spi = {
+	.driver	= {
+		.name	= "cros-ec-spi",
+		.owner	= THIS_MODULE,
+		.pm	= &cros_ec_spi_pm_ops,
+	},
+	.probe		= cros_ec_probe_spi,
+	.remove		= cros_ec_remove_spi,
+	.id_table	= cros_ec_spi_id,
+};
+
+module_spi_driver(cros_ec_driver_spi);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC multi function device (SPI)");
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 05176cd2862b..f1a316e0d6a6 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -499,7 +499,8 @@ static int da903x_probe(struct i2c_client *client,
 	unsigned int tmp;
 	int ret;
 
-	chip = kzalloc(sizeof(struct da903x_chip), GFP_KERNEL);
+	chip = devm_kzalloc(&client->dev, sizeof(struct da903x_chip),
+				GFP_KERNEL);
 	if (chip == NULL)
 		return -ENOMEM;
 
@@ -515,33 +516,27 @@ static int da903x_probe(struct i2c_client *client,
 
 	ret = chip->ops->init_chip(chip);
 	if (ret)
-		goto out_free_chip;
+		return ret;
 
 	/* mask and clear all IRQs */
 	chip->events_mask = 0xffffffff;
 	chip->ops->mask_events(chip, chip->events_mask);
 	chip->ops->read_events(chip, &tmp);
 
-	ret = request_irq(client->irq, da903x_irq_handler,
+	ret = devm_request_irq(&client->dev, client->irq, da903x_irq_handler,
 			IRQF_TRIGGER_FALLING,
 			"da903x", chip);
 	if (ret) {
 		dev_err(&client->dev, "failed to request irq %d\n",
 				client->irq);
-		goto out_free_chip;
+		return ret;
 	}
 
 	ret = da903x_add_subdevs(chip, pdata);
 	if (ret)
-		goto out_free_irq;
+		return ret;
 
 	return 0;
-
-out_free_irq:
-	free_irq(client->irq, chip);
-out_free_chip:
-	kfree(chip);
-	return ret;
 }
 
 static int da903x_remove(struct i2c_client *client)
@@ -549,8 +544,6 @@ static int da903x_remove(struct i2c_client *client)
 	struct da903x_chip *chip = i2c_get_clientdata(client);
 
 	da903x_remove_subdevs(chip);
-	free_irq(client->irq, chip);
-	kfree(chip);
 	return 0;
 }
 
diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c
index 61d63b93576c..0680bcbc53de 100644
--- a/drivers/mfd/da9052-spi.c
+++ b/drivers/mfd/da9052-spi.c
@@ -38,7 +38,7 @@ static int da9052_spi_probe(struct spi_device *spi)
 	da9052->dev = &spi->dev;
 	da9052->chip_irq = spi->irq;
 
-	dev_set_drvdata(&spi->dev, da9052);
+	spi_set_drvdata(spi, da9052);
 
 	da9052_regmap_config.read_flag_mask = 1;
 	da9052_regmap_config.write_flag_mask = 0;
@@ -60,7 +60,7 @@ static int da9052_spi_probe(struct spi_device *spi)
 
 static int da9052_spi_remove(struct spi_device *spi)
 {
-	struct da9052 *da9052 = dev_get_drvdata(&spi->dev);
+	struct da9052 *da9052 = spi_get_drvdata(spi);
 
 	da9052_device_exit(da9052);
 	return 0;
diff --git a/drivers/mfd/da9055-core.c b/drivers/mfd/da9055-core.c
index f56a1a9f7777..49cb23d37469 100644
--- a/drivers/mfd/da9055-core.c
+++ b/drivers/mfd/da9055-core.c
@@ -391,7 +391,7 @@ int da9055_device_init(struct da9055 *da9055)
 		da9055->irq_base = pdata->irq_base;
 
 	ret = regmap_add_irq_chip(da9055->regmap, da9055->chip_irq,
-				  IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 				  da9055->irq_base, &da9055_regmap_irq_chip,
 				  &da9055->irq_data);
 	if (ret < 0)
diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c
index c0bcc872af4e..c60ab0c3c4db 100644
--- a/drivers/mfd/davinci_voicecodec.c
+++ b/drivers/mfd/davinci_voicecodec.c
@@ -177,17 +177,7 @@ static struct platform_driver davinci_vc_driver = {
 	.remove	= davinci_vc_remove,
 };
 
-static int __init davinci_vc_init(void)
-{
-	return platform_driver_probe(&davinci_vc_driver, davinci_vc_probe);
-}
-module_init(davinci_vc_init);
-
-static void __exit davinci_vc_exit(void)
-{
-	platform_driver_unregister(&davinci_vc_driver);
-}
-module_exit(davinci_vc_exit);
+module_platform_driver_probe(davinci_vc_driver, davinci_vc_probe);
 
 MODULE_AUTHOR("Miguel Aguilar");
 MODULE_DESCRIPTION("Texas Instruments DaVinci Voice Codec Core Interface");
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 21434beb420a..319b8abe742b 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -24,6 +24,7 @@
 #include <linux/jiffies.h>
 #include <linux/bitops.h>
 #include <linux/fs.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
 #include <linux/mfd/core.h>
@@ -2704,6 +2705,7 @@ static void dbx500_fw_version_init(struct platform_device *pdev,
 {
 	struct resource *res;
 	void __iomem *tcpm_base;
+	u32 version;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "prcmu-tcpm");
@@ -2713,26 +2715,27 @@ static void dbx500_fw_version_init(struct platform_device *pdev,
 		return;
 	}
 	tcpm_base = ioremap(res->start, resource_size(res));
-	if (tcpm_base != NULL) {
-		u32 version;
-
-		version = readl(tcpm_base + version_offset);
-		fw_info.version.project = (version & 0xFF);
-		fw_info.version.api_version = (version >> 8) & 0xFF;
-		fw_info.version.func_version = (version >> 16) & 0xFF;
-		fw_info.version.errata = (version >> 24) & 0xFF;
-		strncpy(fw_info.version.project_name,
-			fw_project_name(fw_info.version.project),
-			PRCMU_FW_PROJECT_NAME_LEN);
-		fw_info.valid = true;
-		pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
-			fw_info.version.project_name,
-			fw_info.version.project,
-			fw_info.version.api_version,
-			fw_info.version.func_version,
-			fw_info.version.errata);
-		iounmap(tcpm_base);
+	if (!tcpm_base) {
+		dev_err(&pdev->dev, "no prcmu tcpm mem region provided\n");
+		return;
 	}
+
+	version = readl(tcpm_base + version_offset);
+	fw_info.version.project = (version & 0xFF);
+	fw_info.version.api_version = (version >> 8) & 0xFF;
+	fw_info.version.func_version = (version >> 16) & 0xFF;
+	fw_info.version.errata = (version >> 24) & 0xFF;
+	strncpy(fw_info.version.project_name,
+		fw_project_name(fw_info.version.project),
+		PRCMU_FW_PROJECT_NAME_LEN);
+	fw_info.valid = true;
+	pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
+		fw_info.version.project_name,
+		fw_info.version.project,
+		fw_info.version.api_version,
+		fw_info.version.func_version,
+		fw_info.version.errata);
+	iounmap(tcpm_base);
 }
 
 void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
@@ -3065,6 +3068,15 @@ static struct db8500_thsens_platform_data db8500_thsens_data = {
 	.num_trips = 4,
 };
 
+static struct mfd_cell common_prcmu_devs[] = {
+	{
+		.name = "ux500_wdt",
+		.platform_data = &db8500_wdt_pdata,
+		.pdata_size = sizeof(db8500_wdt_pdata),
+		.id = -1,
+	},
+};
+
 static struct mfd_cell db8500_prcmu_devs[] = {
 	{
 		.name = "db8500-prcmu-regulators",
@@ -3079,12 +3091,6 @@ static struct mfd_cell db8500_prcmu_devs[] = {
 		.pdata_size = sizeof(db8500_cpufreq_table),
 	},
 	{
-		.name = "ux500_wdt",
-		.platform_data = &db8500_wdt_pdata,
-		.pdata_size = sizeof(db8500_wdt_pdata),
-		.id = -1,
-	},
-	{
 		.name = "db8500-thermal",
 		.num_resources = ARRAY_SIZE(db8500_thsens_resources),
 		.resources = db8500_thsens_resources,
@@ -3173,13 +3179,25 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 
 	db8500_prcmu_update_cpufreq();
 
-	err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
-			      ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, db8500_irq_domain);
+	err = mfd_add_devices(&pdev->dev, 0, common_prcmu_devs,
+			      ARRAY_SIZE(common_prcmu_devs), NULL, 0, db8500_irq_domain);
 	if (err) {
 		pr_err("prcmu: Failed to add subdevices\n");
 		return err;
 	}
 
+	/* TODO: Remove restriction when clk definitions are available. */
+	if (!of_machine_is_compatible("st-ericsson,u8540")) {
+		err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
+				      ARRAY_SIZE(db8500_prcmu_devs), NULL, 0,
+				      db8500_irq_domain);
+		if (err) {
+			mfd_remove_devices(&pdev->dev);
+			pr_err("prcmu: Failed to add subdevices\n");
+			goto no_irq_return;
+		}
+	}
+
 	err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata,
 					   pdata->ab_irq);
 	if (err) {
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index b7a61f0f27a4..5502106ad515 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -393,7 +393,7 @@ static int pcap_add_subdev(struct pcap_chip *pcap,
 
 static int ezx_pcap_remove(struct spi_device *spi)
 {
-	struct pcap_chip *pcap = dev_get_drvdata(&spi->dev);
+	struct pcap_chip *pcap = spi_get_drvdata(spi);
 	struct pcap_platform_data *pdata = spi->dev.platform_data;
 	int i, adc_irq;
 
@@ -403,7 +403,7 @@ static int ezx_pcap_remove(struct spi_device *spi)
 	/* cleanup ADC */
 	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
 				PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
-	free_irq(adc_irq, pcap);
+	devm_free_irq(&spi->dev, adc_irq, pcap);
 	mutex_lock(&pcap->adc_mutex);
 	for (i = 0; i < PCAP_ADC_MAXQ; i++)
 		kfree(pcap->adc_queue[i]);
@@ -415,8 +415,6 @@ static int ezx_pcap_remove(struct spi_device *spi)
 
 	destroy_workqueue(pcap->workqueue);
 
-	kfree(pcap);
-
 	return 0;
 }
 
@@ -431,7 +429,7 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	if (!pdata)
 		goto ret;
 
-	pcap = kzalloc(sizeof(*pcap), GFP_KERNEL);
+	pcap = devm_kzalloc(&spi->dev, sizeof(*pcap), GFP_KERNEL);
 	if (!pcap) {
 		ret = -ENOMEM;
 		goto ret;
@@ -441,14 +439,14 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	mutex_init(&pcap->adc_mutex);
 	INIT_WORK(&pcap->isr_work, pcap_isr_work);
 	INIT_WORK(&pcap->msr_work, pcap_msr_work);
-	dev_set_drvdata(&spi->dev, pcap);
+	spi_set_drvdata(spi, pcap);
 
 	/* setup spi */
 	spi->bits_per_word = 32;
 	spi->mode = SPI_MODE_0 | (pdata->config & PCAP_CS_AH ? SPI_CS_HIGH : 0);
 	ret = spi_setup(spi);
 	if (ret)
-		goto free_pcap;
+		goto ret;
 
 	pcap->spi = spi;
 
@@ -458,7 +456,7 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	if (!pcap->workqueue) {
 		ret = -ENOMEM;
 		dev_err(&spi->dev, "can't create pcap thread\n");
-		goto free_pcap;
+		goto ret;
 	}
 
 	/* redirect interrupts to AP, except adcdone2 */
@@ -491,7 +489,8 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
 					PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
 
-	ret = request_irq(adc_irq, pcap_adc_irq, 0, "ADC", pcap);
+	ret = devm_request_irq(&spi->dev, adc_irq, pcap_adc_irq, 0, "ADC",
+				pcap);
 	if (ret)
 		goto free_irqchip;
 
@@ -511,14 +510,12 @@ static int ezx_pcap_probe(struct spi_device *spi)
 remove_subdevs:
 	device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
 /* free_adc: */
-	free_irq(adc_irq, pcap);
+	devm_free_irq(&spi->dev, adc_irq, pcap);
 free_irqchip:
 	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
 		irq_set_chip_and_handler(i, NULL, NULL);
 /* destroy_workqueue: */
 	destroy_workqueue(pcap->workqueue);
-free_pcap:
-	kfree(pcap);
 ret:
 	return ret;
 }
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index 9e5453d21a68..0285fceb99a6 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -208,18 +208,7 @@ static struct platform_driver pasic3_driver = {
 	.remove		= pasic3_remove,
 };
 
-static int __init pasic3_base_init(void)
-{
-	return platform_driver_probe(&pasic3_driver, pasic3_probe);
-}
-
-static void __exit pasic3_base_exit(void)
-{
-	platform_driver_unregister(&pasic3_driver);
-}
-
-module_init(pasic3_base_init);
-module_exit(pasic3_base_exit);
+module_platform_driver_probe(pasic3_driver, pasic3_probe);
 
 MODULE_AUTHOR("Philipp Zabel <philipp.zabel@gmail.com>");
 MODULE_DESCRIPTION("Core driver for HTC PASIC3");
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
index 1804331bd52c..5be3b5e13855 100644
--- a/drivers/mfd/intel_msic.c
+++ b/drivers/mfd/intel_msic.c
@@ -323,7 +323,8 @@ static int intel_msic_init_devices(struct intel_msic *msic)
 	if (pdata->ocd) {
 		unsigned gpio = pdata->ocd->gpio;
 
-		ret = gpio_request_one(gpio, GPIOF_IN, "ocd_gpio");
+		ret = devm_gpio_request_one(&pdev->dev, gpio,
+					GPIOF_IN, "ocd_gpio");
 		if (ret) {
 			dev_err(&pdev->dev, "failed to register OCD GPIO\n");
 			return ret;
@@ -332,7 +333,6 @@ static int intel_msic_init_devices(struct intel_msic *msic)
 		ret = gpio_to_irq(gpio);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
-			gpio_free(gpio);
 			return ret;
 		}
 
@@ -359,8 +359,6 @@ static int intel_msic_init_devices(struct intel_msic *msic)
 
 fail:
 	mfd_remove_devices(&pdev->dev);
-	if (pdata->ocd)
-		gpio_free(pdata->ocd->gpio);
 
 	return ret;
 }
@@ -368,12 +366,8 @@ fail:
 static void intel_msic_remove_devices(struct intel_msic *msic)
 {
 	struct platform_device *pdev = msic->pdev;
-	struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
 
 	mfd_remove_devices(&pdev->dev);
-
-	if (pdata->ocd)
-		gpio_free(pdata->ocd->gpio);
 }
 
 static int intel_msic_probe(struct platform_device *pdev)
diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index ceebf2c1ea97..4b7e6dac1de8 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -496,8 +496,8 @@ static int lm3533_device_init(struct lm3533 *lm3533)
 	dev_set_drvdata(lm3533->dev, lm3533);
 
 	if (gpio_is_valid(lm3533->gpio_hwen)) {
-		ret = gpio_request_one(lm3533->gpio_hwen, GPIOF_OUT_INIT_LOW,
-								"lm3533-hwen");
+		ret = devm_gpio_request_one(lm3533->dev, lm3533->gpio_hwen,
+					GPIOF_OUT_INIT_LOW, "lm3533-hwen");
 		if (ret < 0) {
 			dev_err(lm3533->dev,
 				"failed to request HWEN GPIO %d\n",
@@ -528,8 +528,6 @@ err_unregister:
 	mfd_remove_devices(lm3533->dev);
 err_disable:
 	lm3533_disable(lm3533);
-	if (gpio_is_valid(lm3533->gpio_hwen))
-		gpio_free(lm3533->gpio_hwen);
 
 	return ret;
 }
@@ -542,8 +540,6 @@ static void lm3533_device_exit(struct lm3533 *lm3533)
 
 	mfd_remove_devices(lm3533->dev);
 	lm3533_disable(lm3533);
-	if (gpio_is_valid(lm3533->gpio_hwen))
-		gpio_free(lm3533->gpio_hwen);
 }
 
 static bool lm3533_readable_register(struct device *dev, unsigned int reg)
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index 4d73963cd8f0..1cbb17609c8b 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -46,7 +46,7 @@ static struct regmap_config max77686_regmap_config = {
 
 #ifdef CONFIG_OF
 static struct of_device_id max77686_pmic_dt_match[] = {
-	{.compatible = "maxim,max77686",        .data = 0},
+	{.compatible = "maxim,max77686", .data = NULL},
 	{},
 };
 
diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c
index 3032bae20b62..77189daadf1e 100644
--- a/drivers/mfd/mc13xxx-spi.c
+++ b/drivers/mfd/mc13xxx-spi.c
@@ -131,7 +131,7 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
 	if (!mc13xxx)
 		return -ENOMEM;
 
-	dev_set_drvdata(&spi->dev, mc13xxx);
+	spi_set_drvdata(spi, mc13xxx);
 	spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
 
 	mc13xxx->dev = &spi->dev;
@@ -144,7 +144,7 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
 		ret = PTR_ERR(mc13xxx->regmap);
 		dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
 				ret);
-		dev_set_drvdata(&spi->dev, NULL);
+		spi_set_drvdata(spi, NULL);
 		return ret;
 	}
 
@@ -164,7 +164,7 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
 
 static int mc13xxx_spi_remove(struct spi_device *spi)
 {
-	struct mc13xxx *mc13xxx = dev_get_drvdata(&spi->dev);
+	struct mc13xxx *mc13xxx = spi_get_drvdata(spi);
 
 	mc13xxx_common_cleanup(mc13xxx);
 
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 4febc5c7fdee..759fae3ca7fb 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -1,8 +1,9 @@
 /**
  * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ * Author: Roger Quadros <rogerq@ti.com>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2  of
@@ -27,6 +28,9 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb-omap.h>
 #include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
 
 #include "omap-usb.h"
 
@@ -137,6 +141,49 @@ static inline u8 usbhs_readb(void __iomem *base, u8 reg)
 
 /*-------------------------------------------------------------------------*/
 
+/**
+ * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
+ * to the device tree binding portN-mode found in
+ * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
+ */
+static const char * const port_modes[] = {
+	[OMAP_USBHS_PORT_MODE_UNUSED]	= "",
+	[OMAP_EHCI_PORT_MODE_PHY]	= "ehci-phy",
+	[OMAP_EHCI_PORT_MODE_TLL]	= "ehci-tll",
+	[OMAP_EHCI_PORT_MODE_HSIC]	= "ehci-hsic",
+	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0]	= "ohci-phy-6pin-datse0",
+	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM]	= "ohci-phy-6pin-dpdm",
+	[OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0]	= "ohci-phy-3pin-datse0",
+	[OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM]	= "ohci-phy-4pin-dpdm",
+	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0]	= "ohci-tll-6pin-datse0",
+	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM]	= "ohci-tll-6pin-dpdm",
+	[OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0]	= "ohci-tll-3pin-datse0",
+	[OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM]	= "ohci-tll-4pin-dpdm",
+	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0]	= "ohci-tll-2pin-datse0",
+	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM]	= "ohci-tll-2pin-dpdm",
+};
+
+/**
+ * omap_usbhs_get_dt_port_mode - Get the 'enum usbhs_omap_port_mode'
+ * from the port mode string.
+ * @mode: The port mode string, usually obtained from device tree.
+ *
+ * The function returns the 'enum usbhs_omap_port_mode' that matches the
+ * provided port mode string as per the port_modes table.
+ * If no match is found it returns -ENODEV
+ */
+static const int omap_usbhs_get_dt_port_mode(const char *mode)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port_modes); i++) {
+		if (!strcmp(mode, port_modes[i]))
+			return i;
+	}
+
+	return -ENODEV;
+}
+
 static struct platform_device *omap_usbhs_alloc_child(const char *name,
 			struct resource	*res, int num_resources, void *pdata,
 			size_t pdata_size, struct device *dev)
@@ -278,7 +325,7 @@ static int usbhs_runtime_resume(struct device *dev)
 
 	dev_dbg(dev, "usbhs_runtime_resume\n");
 
-	omap_tll_enable();
+	omap_tll_enable(pdata);
 
 	if (!IS_ERR(omap->ehci_logic_fck))
 		clk_enable(omap->ehci_logic_fck);
@@ -353,7 +400,7 @@ static int usbhs_runtime_suspend(struct device *dev)
 	if (!IS_ERR(omap->ehci_logic_fck))
 		clk_disable(omap->ehci_logic_fck);
 
-	omap_tll_disable();
+	omap_tll_disable(pdata);
 
 	return 0;
 }
@@ -430,24 +477,10 @@ static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
 static void omap_usbhs_init(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
-	struct usbhs_omap_platform_data	*pdata = omap->pdata;
 	unsigned			reg;
 
 	dev_dbg(dev, "starting TI HSUSB Controller\n");
 
-	if (pdata->phy_reset) {
-		if (gpio_is_valid(pdata->reset_gpio_port[0]))
-			gpio_request_one(pdata->reset_gpio_port[0],
-					 GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
-
-		if (gpio_is_valid(pdata->reset_gpio_port[1]))
-			gpio_request_one(pdata->reset_gpio_port[1],
-					 GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
-
-		/* Hold the PHY in RESET for enough time till DIR is high */
-		udelay(10);
-	}
-
 	pm_runtime_get_sync(dev);
 
 	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
@@ -476,36 +509,59 @@ static void omap_usbhs_init(struct device *dev)
 	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
 
 	pm_runtime_put_sync(dev);
-	if (pdata->phy_reset) {
-		/* Hold the PHY in RESET for enough time till
-		 * PHY is settled and ready
-		 */
-		udelay(10);
+}
+
+static int usbhs_omap_get_dt_pdata(struct device *dev,
+					struct usbhs_omap_platform_data *pdata)
+{
+	int ret, i;
+	struct device_node *node = dev->of_node;
 
-		if (gpio_is_valid(pdata->reset_gpio_port[0]))
-			gpio_set_value_cansleep
-				(pdata->reset_gpio_port[0], 1);
+	ret = of_property_read_u32(node, "num-ports", &pdata->nports);
+	if (ret)
+		pdata->nports = 0;
 
-		if (gpio_is_valid(pdata->reset_gpio_port[1]))
-			gpio_set_value_cansleep
-				(pdata->reset_gpio_port[1], 1);
+	if (pdata->nports > OMAP3_HS_USB_PORTS) {
+		dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n",
+				pdata->nports, OMAP3_HS_USB_PORTS);
+		return -ENODEV;
 	}
-}
 
-static void omap_usbhs_deinit(struct device *dev)
-{
-	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
-	struct usbhs_omap_platform_data	*pdata = omap->pdata;
+	/* get port modes */
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
+		char prop[11];
+		const char *mode;
 
-	if (pdata->phy_reset) {
-		if (gpio_is_valid(pdata->reset_gpio_port[0]))
-			gpio_free(pdata->reset_gpio_port[0]);
+		pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
+
+		snprintf(prop, sizeof(prop), "port%d-mode", i + 1);
+		ret = of_property_read_string(node, prop, &mode);
+		if (ret < 0)
+			continue;
+
+		ret = omap_usbhs_get_dt_port_mode(mode);
+		if (ret < 0) {
+			dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
+					i, mode);
+			return -ENODEV;
+		}
 
-		if (gpio_is_valid(pdata->reset_gpio_port[1]))
-			gpio_free(pdata->reset_gpio_port[1]);
+		dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret);
+		pdata->port_mode[i] = ret;
 	}
+
+	/* get flags */
+	pdata->single_ulpi_bypass = of_property_read_bool(node,
+						"single-ulpi-bypass");
+
+	return 0;
 }
 
+static struct of_device_id usbhs_child_match_table[] = {
+	{ .compatible = "ti,omap-ehci", },
+	{ .compatible = "ti,omap-ohci", },
+	{ }
+};
 
 /**
  * usbhs_omap_probe - initialize TI-based HCDs
@@ -522,26 +578,46 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 	int				i;
 	bool				need_logic_fck;
 
+	if (dev->of_node) {
+		/* For DT boot we populate platform data from OF node */
+		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		ret = usbhs_omap_get_dt_pdata(dev, pdata);
+		if (ret)
+			return ret;
+
+		dev->platform_data = pdata;
+	}
+
 	if (!pdata) {
 		dev_err(dev, "Missing platform data\n");
 		return -ENODEV;
 	}
 
+	if (pdata->nports > OMAP3_HS_USB_PORTS) {
+		dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n",
+				pdata->nports, OMAP3_HS_USB_PORTS);
+		return -ENODEV;
+	}
+
 	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
 	if (!omap) {
 		dev_err(dev, "Memory allocation failed\n");
 		return -ENOMEM;
 	}
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
-	omap->uhh_base = devm_request_and_ioremap(dev, res);
-	if (!omap->uhh_base) {
-		dev_err(dev, "Resource request/ioremap failed\n");
-		return -EADDRNOTAVAIL;
-	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	omap->uhh_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(omap->uhh_base))
+		return PTR_ERR(omap->uhh_base);
 
 	omap->pdata = pdata;
 
+	/* Initialize the TLL subsystem */
+	omap_tll_init(pdata);
+
 	pm_runtime_enable(dev);
 
 	platform_set_drvdata(pdev, omap);
@@ -575,6 +651,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 			 omap->usbhs_rev, omap->nports);
 			break;
 		}
+		pdata->nports = omap->nports;
 	}
 
 	i = sizeof(struct clk *) * omap->nports;
@@ -700,17 +777,28 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 	}
 
 	omap_usbhs_init(dev);
-	ret = omap_usbhs_alloc_children(pdev);
-	if (ret) {
-		dev_err(dev, "omap_usbhs_alloc_children failed\n");
-		goto err_alloc;
+
+	if (dev->of_node) {
+		ret = of_platform_populate(dev->of_node,
+				usbhs_child_match_table, NULL, dev);
+
+		if (ret) {
+			dev_err(dev, "Failed to create DT children: %d\n", ret);
+			goto err_alloc;
+		}
+
+	} else {
+		ret = omap_usbhs_alloc_children(pdev);
+		if (ret) {
+			dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
+						ret);
+			goto err_alloc;
+		}
 	}
 
 	return 0;
 
 err_alloc:
-	omap_usbhs_deinit(&pdev->dev);
-
 	for (i = 0; i < omap->nports; i++) {
 		if (!IS_ERR(omap->utmi_clk[i]))
 			clk_put(omap->utmi_clk[i]);
@@ -744,6 +832,13 @@ err_mem:
 	return ret;
 }
 
+static int usbhs_omap_remove_child(struct device *dev, void *data)
+{
+	dev_info(dev, "unregistering\n");
+	platform_device_unregister(to_platform_device(dev));
+	return 0;
+}
+
 /**
  * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
  * @pdev: USB Host Controller being removed
@@ -755,8 +850,6 @@ static int usbhs_omap_remove(struct platform_device *pdev)
 	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
 	int i;
 
-	omap_usbhs_deinit(&pdev->dev);
-
 	for (i = 0; i < omap->nports; i++) {
 		if (!IS_ERR(omap->utmi_clk[i]))
 			clk_put(omap->utmi_clk[i]);
@@ -777,6 +870,8 @@ static int usbhs_omap_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 
+	/* remove children */
+	device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
 	return 0;
 }
 
@@ -785,16 +880,26 @@ static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
 	.runtime_resume		= usbhs_runtime_resume,
 };
 
+static const struct of_device_id usbhs_omap_dt_ids[] = {
+	{ .compatible = "ti,usbhs-host" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
+
+
 static struct platform_driver usbhs_omap_driver = {
 	.driver = {
 		.name		= (char *)usbhs_driver_name,
 		.owner		= THIS_MODULE,
 		.pm		= &usbhsomap_dev_pm_ops,
+		.of_match_table = of_match_ptr(usbhs_omap_dt_ids),
 	},
 	.remove		= usbhs_omap_remove,
 };
 
 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 0aef1a768880..e59ac4cbac96 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -1,8 +1,9 @@
 /**
  * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com
  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ * Author: Roger Quadros <rogerq@ti.com>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2  of
@@ -27,6 +28,7 @@
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_data/usb-omap.h>
+#include <linux/of.h>
 
 #define USBTLL_DRIVER_NAME	"usbhs_tll"
 
@@ -105,8 +107,8 @@
 
 struct usbtll_omap {
 	int					nch;	/* num. of channels */
-	struct usbhs_omap_platform_data		*pdata;
 	struct clk				**ch_clk;
+	void __iomem				*base;
 };
 
 /*-------------------------------------------------------------------------*/
@@ -210,14 +212,10 @@ static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
 static int usbtll_omap_probe(struct platform_device *pdev)
 {
 	struct device				*dev =  &pdev->dev;
-	struct usbhs_omap_platform_data		*pdata = dev->platform_data;
-	void __iomem				*base;
 	struct resource				*res;
 	struct usbtll_omap			*tll;
-	unsigned				reg;
 	int					ret = 0;
 	int					i, ver;
-	bool needs_tll;
 
 	dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
 
@@ -227,26 +225,16 @@ static int usbtll_omap_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	if (!pdata) {
-		dev_err(dev, "Platform data missing\n");
-		return -ENODEV;
-	}
-
-	tll->pdata = pdata;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_request_and_ioremap(dev, res);
-	if (!base) {
-		ret = -EADDRNOTAVAIL;
-		dev_err(dev, "Resource request/ioremap failed:%d\n", ret);
-		return ret;
-	}
+	tll->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(tll->base))
+		return PTR_ERR(tll->base);
 
 	platform_set_drvdata(pdev, tll);
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-	ver =  usbtll_read(base, OMAP_USBTLL_REVISION);
+	ver =  usbtll_read(tll->base, OMAP_USBTLL_REVISION);
 	switch (ver) {
 	case OMAP_USBTLL_REV1:
 	case OMAP_USBTLL_REV4:
@@ -283,11 +271,85 @@ static int usbtll_omap_probe(struct platform_device *pdev)
 			dev_dbg(dev, "can't get clock : %s\n", clkname);
 	}
 
+	pm_runtime_put_sync(dev);
+	/* only after this can omap_tll_enable/disable work */
+	spin_lock(&tll_lock);
+	tll_dev = dev;
+	spin_unlock(&tll_lock);
+
+	return 0;
+
+err_clk_alloc:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+/**
+ * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbtll_omap_probe().
+ */
+static int usbtll_omap_remove(struct platform_device *pdev)
+{
+	struct usbtll_omap *tll = platform_get_drvdata(pdev);
+	int i;
+
+	spin_lock(&tll_lock);
+	tll_dev = NULL;
+	spin_unlock(&tll_lock);
+
+	for (i = 0; i < tll->nch; i++)
+		if (!IS_ERR(tll->ch_clk[i]))
+			clk_put(tll->ch_clk[i]);
+
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static const struct of_device_id usbtll_omap_dt_ids[] = {
+	{ .compatible = "ti,usbhs-tll" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
+
+static struct platform_driver usbtll_omap_driver = {
+	.driver = {
+		.name		= (char *)usbtll_driver_name,
+		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(usbtll_omap_dt_ids),
+	},
+	.probe		= usbtll_omap_probe,
+	.remove		= usbtll_omap_remove,
+};
+
+int omap_tll_init(struct usbhs_omap_platform_data *pdata)
+{
+	int i;
+	bool needs_tll;
+	unsigned reg;
+	struct usbtll_omap *tll;
+
+	spin_lock(&tll_lock);
+
+	if (!tll_dev) {
+		spin_unlock(&tll_lock);
+		return -ENODEV;
+	}
+
+	tll = dev_get_drvdata(tll_dev);
+
 	needs_tll = false;
 	for (i = 0; i < tll->nch; i++)
 		needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
 
+	pm_runtime_get_sync(tll_dev);
+
 	if (needs_tll) {
+		void __iomem *base = tll->base;
 
 		/* Program Common TLL register */
 		reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
@@ -336,51 +398,29 @@ static int usbtll_omap_probe(struct platform_device *pdev)
 		}
 	}
 
-	pm_runtime_put_sync(dev);
-	/* only after this can omap_tll_enable/disable work */
-	spin_lock(&tll_lock);
-	tll_dev = dev;
+	pm_runtime_put_sync(tll_dev);
+
 	spin_unlock(&tll_lock);
 
 	return 0;
-
-err_clk_alloc:
-	pm_runtime_put_sync(dev);
-	pm_runtime_disable(dev);
-
-	return ret;
 }
+EXPORT_SYMBOL_GPL(omap_tll_init);
 
-/**
- * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
- * @pdev: USB Host Controller being removed
- *
- * Reverses the effect of usbtll_omap_probe().
- */
-static int usbtll_omap_remove(struct platform_device *pdev)
+int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
 {
-	struct usbtll_omap *tll = platform_get_drvdata(pdev);
 	int i;
+	struct usbtll_omap *tll;
 
 	spin_lock(&tll_lock);
-	tll_dev = NULL;
-	spin_unlock(&tll_lock);
 
-	for (i = 0; i < tll->nch; i++)
-		if (!IS_ERR(tll->ch_clk[i]))
-			clk_put(tll->ch_clk[i]);
-
-	pm_runtime_disable(&pdev->dev);
-	return 0;
-}
+	if (!tll_dev) {
+		spin_unlock(&tll_lock);
+		return -ENODEV;
+	}
 
-static int usbtll_runtime_resume(struct device *dev)
-{
-	struct usbtll_omap			*tll = dev_get_drvdata(dev);
-	struct usbhs_omap_platform_data		*pdata = tll->pdata;
-	int i;
+	tll = dev_get_drvdata(tll_dev);
 
-	dev_dbg(dev, "usbtll_runtime_resume\n");
+	pm_runtime_get_sync(tll_dev);
 
 	for (i = 0; i < tll->nch; i++) {
 		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
@@ -391,22 +431,31 @@ static int usbtll_runtime_resume(struct device *dev)
 
 			r = clk_enable(tll->ch_clk[i]);
 			if (r) {
-				dev_err(dev,
+				dev_err(tll_dev,
 				 "Error enabling ch %d clock: %d\n", i, r);
 			}
 		}
 	}
 
+	spin_unlock(&tll_lock);
+
 	return 0;
 }
+EXPORT_SYMBOL_GPL(omap_tll_enable);
 
-static int usbtll_runtime_suspend(struct device *dev)
+int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
 {
-	struct usbtll_omap			*tll = dev_get_drvdata(dev);
-	struct usbhs_omap_platform_data		*pdata = tll->pdata;
 	int i;
+	struct usbtll_omap *tll;
 
-	dev_dbg(dev, "usbtll_runtime_suspend\n");
+	spin_lock(&tll_lock);
+
+	if (!tll_dev) {
+		spin_unlock(&tll_lock);
+		return -ENODEV;
+	}
+
+	tll = dev_get_drvdata(tll_dev);
 
 	for (i = 0; i < tll->nch; i++) {
 		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
@@ -415,64 +464,16 @@ static int usbtll_runtime_suspend(struct device *dev)
 		}
 	}
 
-	return 0;
-}
-
-static const struct dev_pm_ops usbtllomap_dev_pm_ops = {
-	SET_RUNTIME_PM_OPS(usbtll_runtime_suspend,
-			   usbtll_runtime_resume,
-			   NULL)
-};
-
-static struct platform_driver usbtll_omap_driver = {
-	.driver = {
-		.name		= (char *)usbtll_driver_name,
-		.owner		= THIS_MODULE,
-		.pm		= &usbtllomap_dev_pm_ops,
-	},
-	.probe		= usbtll_omap_probe,
-	.remove		= usbtll_omap_remove,
-};
-
-int omap_tll_enable(void)
-{
-	int ret;
-
-	spin_lock(&tll_lock);
-
-	if (!tll_dev) {
-		pr_err("%s: OMAP USB TLL not initialized\n", __func__);
-		ret = -ENODEV;
-	} else {
-		ret = pm_runtime_get_sync(tll_dev);
-	}
-
-	spin_unlock(&tll_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(omap_tll_enable);
-
-int omap_tll_disable(void)
-{
-	int ret;
-
-	spin_lock(&tll_lock);
-
-	if (!tll_dev) {
-		pr_err("%s: OMAP USB TLL not initialized\n", __func__);
-		ret = -ENODEV;
-	} else {
-		ret = pm_runtime_put_sync(tll_dev);
-	}
+	pm_runtime_put_sync(tll_dev);
 
 	spin_unlock(&tll_lock);
 
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(omap_tll_disable);
 
 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers");
diff --git a/drivers/mfd/omap-usb.h b/drivers/mfd/omap-usb.h
index 972aa961b064..2a508b6aeac8 100644
--- a/drivers/mfd/omap-usb.h
+++ b/drivers/mfd/omap-usb.h
@@ -1,2 +1,3 @@
-extern int omap_tll_enable(void);
-extern int omap_tll_disable(void);
+extern int omap_tll_init(struct usbhs_omap_platform_data *pdata);
+extern int omap_tll_enable(struct usbhs_omap_platform_data *pdata);
+extern int omap_tll_disable(struct usbhs_omap_platform_data *pdata);
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 73bf76df1044..53e9fe638d32 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -278,20 +278,20 @@ static void palmas_dt_to_pdata(struct i2c_client *i2c,
 	int ret;
 	u32 prop;
 
-	ret = of_property_read_u32(node, "ti,mux_pad1", &prop);
+	ret = of_property_read_u32(node, "ti,mux-pad1", &prop);
 	if (!ret) {
 		pdata->mux_from_pdata = 1;
 		pdata->pad1 = prop;
 	}
 
-	ret = of_property_read_u32(node, "ti,mux_pad2", &prop);
+	ret = of_property_read_u32(node, "ti,mux-pad2", &prop);
 	if (!ret) {
 		pdata->mux_from_pdata = 1;
 		pdata->pad2 = prop;
 	}
 
 	/* The default for this register is all masked */
-	ret = of_property_read_u32(node, "ti,power_ctrl", &prop);
+	ret = of_property_read_u32(node, "ti,power-ctrl", &prop);
 	if (!ret)
 		pdata->power_ctrl = prop;
 	else
@@ -349,6 +349,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 				ret = -ENOMEM;
 				goto err;
 			}
+			palmas->i2c_clients[i]->dev.of_node = of_node_get(node);
 		}
 		palmas->regmap[i] = devm_regmap_init_i2c(palmas->i2c_clients[i],
 				&palmas_regmap_config[i]);
diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c
index 3ba048655bf3..a1830986eeb7 100644
--- a/drivers/mfd/retu-mfd.c
+++ b/drivers/mfd/retu-mfd.c
@@ -1,5 +1,5 @@
 /*
- * Retu MFD driver
+ * Retu/Tahvo MFD driver
  *
  * Copyright (C) 2004, 2005 Nokia Corporation
  *
@@ -33,7 +33,8 @@
 #define RETU_REG_ASICR		0x00		/* ASIC ID and revision */
 #define RETU_REG_ASICR_VILMA	(1 << 7)	/* Bit indicating Vilma */
 #define RETU_REG_IDR		0x01		/* Interrupt ID */
-#define RETU_REG_IMR		0x02		/* Interrupt mask */
+#define RETU_REG_IMR		0x02		/* Interrupt mask (Retu) */
+#define TAHVO_REG_IMR		0x03		/* Interrupt mask (Tahvo) */
 
 /* Interrupt sources */
 #define RETU_INT_PWR		0		/* Power button */
@@ -84,6 +85,62 @@ static struct regmap_irq_chip retu_irq_chip = {
 /* Retu device registered for the power off. */
 static struct retu_dev *retu_pm_power_off;
 
+static struct resource tahvo_usb_res[] = {
+	{
+		.name	= "tahvo-usb",
+		.start	= TAHVO_INT_VBUS,
+		.end	= TAHVO_INT_VBUS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell tahvo_devs[] = {
+	{
+		.name		= "tahvo-usb",
+		.resources	= tahvo_usb_res,
+		.num_resources	= ARRAY_SIZE(tahvo_usb_res),
+	},
+};
+
+static struct regmap_irq tahvo_irqs[] = {
+	[TAHVO_INT_VBUS] = {
+		.mask = 1 << TAHVO_INT_VBUS,
+	}
+};
+
+static struct regmap_irq_chip tahvo_irq_chip = {
+	.name		= "TAHVO",
+	.irqs		= tahvo_irqs,
+	.num_irqs	= ARRAY_SIZE(tahvo_irqs),
+	.num_regs	= 1,
+	.status_base	= RETU_REG_IDR,
+	.mask_base	= TAHVO_REG_IMR,
+	.ack_base	= RETU_REG_IDR,
+};
+
+static const struct retu_data {
+	char			*chip_name;
+	char			*companion_name;
+	struct regmap_irq_chip	*irq_chip;
+	struct mfd_cell		*children;
+	int			nchildren;
+} retu_data[] = {
+	[0] = {
+		.chip_name	= "Retu",
+		.companion_name	= "Vilma",
+		.irq_chip	= &retu_irq_chip,
+		.children	= retu_devs,
+		.nchildren	= ARRAY_SIZE(retu_devs),
+	},
+	[1] = {
+		.chip_name	= "Tahvo",
+		.companion_name	= "Betty",
+		.irq_chip	= &tahvo_irq_chip,
+		.children	= tahvo_devs,
+		.nchildren	= ARRAY_SIZE(tahvo_devs),
+	}
+};
+
 int retu_read(struct retu_dev *rdev, u8 reg)
 {
 	int ret;
@@ -173,9 +230,14 @@ static struct regmap_config retu_config = {
 
 static int retu_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 {
+	struct retu_data const *rdat;
 	struct retu_dev *rdev;
 	int ret;
 
+	if (i2c->addr > ARRAY_SIZE(retu_data))
+		return -ENODEV;
+	rdat = &retu_data[i2c->addr - 1];
+
 	rdev = devm_kzalloc(&i2c->dev, sizeof(*rdev), GFP_KERNEL);
 	if (rdev == NULL)
 		return -ENOMEM;
@@ -190,25 +252,27 @@ static int retu_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 
 	ret = retu_read(rdev, RETU_REG_ASICR);
 	if (ret < 0) {
-		dev_err(rdev->dev, "could not read Retu revision: %d\n", ret);
+		dev_err(rdev->dev, "could not read %s revision: %d\n",
+			rdat->chip_name, ret);
 		return ret;
 	}
 
-	dev_info(rdev->dev, "Retu%s v%d.%d found\n",
-		 (ret & RETU_REG_ASICR_VILMA) ? " & Vilma" : "",
+	dev_info(rdev->dev, "%s%s%s v%d.%d found\n", rdat->chip_name,
+		 (ret & RETU_REG_ASICR_VILMA) ? " & " : "",
+		 (ret & RETU_REG_ASICR_VILMA) ? rdat->companion_name : "",
 		 (ret >> 4) & 0x7, ret & 0xf);
 
-	/* Mask all RETU interrupts. */
-	ret = retu_write(rdev, RETU_REG_IMR, 0xffff);
+	/* Mask all interrupts. */
+	ret = retu_write(rdev, rdat->irq_chip->mask_base, 0xffff);
 	if (ret < 0)
 		return ret;
 
 	ret = regmap_add_irq_chip(rdev->regmap, i2c->irq, IRQF_ONESHOT, -1,
-				  &retu_irq_chip, &rdev->irq_data);
+				  rdat->irq_chip, &rdev->irq_data);
 	if (ret < 0)
 		return ret;
 
-	ret = mfd_add_devices(rdev->dev, -1, retu_devs, ARRAY_SIZE(retu_devs),
+	ret = mfd_add_devices(rdev->dev, -1, rdat->children, rdat->nchildren,
 			      NULL, regmap_irq_chip_get_base(rdev->irq_data),
 			      NULL);
 	if (ret < 0) {
@@ -216,7 +280,7 @@ static int retu_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 		return ret;
 	}
 
-	if (!pm_power_off) {
+	if (i2c->addr == 1 && !pm_power_off) {
 		retu_pm_power_off = rdev;
 		pm_power_off	  = retu_power_off;
 	}
@@ -240,6 +304,7 @@ static int retu_remove(struct i2c_client *i2c)
 
 static const struct i2c_device_id retu_id[] = {
 	{ "retu-mfd", 0 },
+	{ "tahvo-mfd", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, retu_id);
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
new file mode 100644
index 000000000000..15dc848bc081
--- /dev/null
+++ b/drivers/mfd/rts5249.c
@@ -0,0 +1,241 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ *   No. 128, West Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mfd/rtsx_pci.h>
+
+#include "rtsx_pcr.h"
+
+static u8 rts5249_get_ic_version(struct rtsx_pcr *pcr)
+{
+	u8 val;
+
+	rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val);
+	return val & 0x0F;
+}
+
+static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
+{
+	rtsx_pci_init_cmd(pcr);
+
+	/* Configure GPIO as output */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+	/* Switch LDO3318 source from DV33 to card_3v3 */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
+	/* LED shine disabled, set initial shine cycle period */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
+	/* Correct driving */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+			SD30_CLK_DRIVE_SEL, 0xFF, 0x99);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+			SD30_CMD_DRIVE_SEL, 0xFF, 0x99);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+			SD30_DAT_DRIVE_SEL, 0xFF, 0x92);
+
+	return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV, 0xFE46);
+	if (err < 0)
+		return err;
+
+	msleep(1);
+
+	return rtsx_pci_write_phy_register(pcr, PHY_BPCR, 0x05C0);
+}
+
+static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
+}
+
+static int rts5249_turn_off_led(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
+}
+
+static int rts5249_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
+}
+
+static int rts5249_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+	return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
+}
+
+static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+	int err;
+
+	rtsx_pci_init_cmd(pcr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+			SD_POWER_MASK, SD_VCC_PARTIAL_POWER_ON);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+			LDO3318_PWR_MASK, 0x02);
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	msleep(5);
+
+	rtsx_pci_init_cmd(pcr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+			SD_POWER_MASK, SD_VCC_POWER_ON);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+			LDO3318_PWR_MASK, 0x06);
+	err = rtsx_pci_send_cmd(pcr, 100);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
+{
+	rtsx_pci_init_cmd(pcr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+			SD_POWER_MASK, SD_POWER_OFF);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+			LDO3318_PWR_MASK, 0x00);
+	return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	int err;
+	u8 clk_drive, cmd_drive, dat_drive;
+
+	if (voltage == OUTPUT_3V3) {
+		err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4FC0 | 0x24);
+		if (err < 0)
+			return err;
+		clk_drive = 0x99;
+		cmd_drive = 0x99;
+		dat_drive = 0x92;
+	} else if (voltage == OUTPUT_1V8) {
+		err = rtsx_pci_write_phy_register(pcr, PHY_BACR, 0x3C02);
+		if (err < 0)
+			return err;
+		err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4C40 | 0x24);
+		if (err < 0)
+			return err;
+		clk_drive = 0xb3;
+		cmd_drive = 0xb3;
+		dat_drive = 0xb3;
+	} else {
+		return -EINVAL;
+	}
+
+	/* set pad drive */
+	rtsx_pci_init_cmd(pcr);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
+			0xFF, clk_drive);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
+			0xFF, cmd_drive);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
+			0xFF, dat_drive);
+	return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static const struct pcr_ops rts5249_pcr_ops = {
+	.extra_init_hw = rts5249_extra_init_hw,
+	.optimize_phy = rts5249_optimize_phy,
+	.turn_on_led = rts5249_turn_on_led,
+	.turn_off_led = rts5249_turn_off_led,
+	.enable_auto_blink = rts5249_enable_auto_blink,
+	.disable_auto_blink = rts5249_disable_auto_blink,
+	.card_power_on = rts5249_card_power_on,
+	.card_power_off = rts5249_card_power_off,
+	.switch_output_voltage = rts5249_switch_output_voltage,
+};
+
+/* SD Pull Control Enable:
+ *     SD_DAT[3:0] ==> pull up
+ *     SD_CD       ==> pull up
+ *     SD_WP       ==> pull up
+ *     SD_CMD      ==> pull up
+ *     SD_CLK      ==> pull down
+ */
+static const u32 rts5249_sd_pull_ctl_enable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL1, 0x66),
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+	RTSX_REG_PAIR(CARD_PULL_CTL4, 0xAA),
+	0,
+};
+
+/* SD Pull Control Disable:
+ *     SD_DAT[3:0] ==> pull down
+ *     SD_CD       ==> pull up
+ *     SD_WP       ==> pull down
+ *     SD_CMD      ==> pull down
+ *     SD_CLK      ==> pull down
+ */
+static const u32 rts5249_sd_pull_ctl_disable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL1, 0x66),
+	RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+	RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+	0,
+};
+
+/* MS Pull Control Enable:
+ *     MS CD       ==> pull up
+ *     others      ==> pull down
+ */
+static const u32 rts5249_ms_pull_ctl_enable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+	0,
+};
+
+/* MS Pull Control Disable:
+ *     MS CD       ==> pull up
+ *     others      ==> pull down
+ */
+static const u32 rts5249_ms_pull_ctl_disable_tbl[] = {
+	RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+	RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+	0,
+};
+
+void rts5249_init_params(struct rtsx_pcr *pcr)
+{
+	pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
+	pcr->num_slots = 2;
+	pcr->ops = &rts5249_pcr_ops;
+
+	pcr->ic_version = rts5249_get_ic_version(pcr);
+	pcr->sd_pull_ctl_enable_tbl = rts5249_sd_pull_ctl_enable_tbl;
+	pcr->sd_pull_ctl_disable_tbl = rts5249_sd_pull_ctl_disable_tbl;
+	pcr->ms_pull_ctl_enable_tbl = rts5249_ms_pull_ctl_enable_tbl;
+	pcr->ms_pull_ctl_disable_tbl = rts5249_ms_pull_ctl_disable_tbl;
+}
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 2f12cc13489a..e968c01ca2ac 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -56,6 +56,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
 	{ PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+	{ PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ 0, }
 };
 
@@ -1033,6 +1034,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
 	case 0x5227:
 		rts5227_init_params(pcr);
 		break;
+
+	case 0x5249:
+		rts5249_init_params(pcr);
+		break;
 	}
 
 	dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",
@@ -1138,7 +1143,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
 
 	ret = rtsx_pci_acquire_irq(pcr);
 	if (ret < 0)
-		goto free_dma;
+		goto disable_msi;
 
 	pci_set_master(pcidev);
 	synchronize_irq(pcr->irq);
@@ -1162,7 +1167,9 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
 
 disable_irq:
 	free_irq(pcr->irq, (void *)pcr);
-free_dma:
+disable_msi:
+	if (pcr->msi_en)
+		pci_disable_msi(pcr->pci);
 	dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
 			pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
 unmap:
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index 2b3ab8a04823..55fcfc25c4e4 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -32,5 +32,6 @@ void rts5209_init_params(struct rtsx_pcr *pcr);
 void rts5229_init_params(struct rtsx_pcr *pcr);
 void rtl8411_init_params(struct rtsx_pcr *pcr);
 void rts5227_init_params(struct rtsx_pcr *pcr);
+void rts5249_init_params(struct rtsx_pcr *pcr);
 
 #endif
diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c
new file mode 100644
index 000000000000..de48b4e88450
--- /dev/null
+++ b/drivers/mfd/si476x-cmd.c
@@ -0,0 +1,1553 @@
+/*
+ * drivers/mfd/si476x-cmd.c -- Subroutines implementing command
+ * protocol of si476x series of chips
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+#include <linux/i2c.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/videodev2.h>
+
+#include <linux/mfd/si476x-core.h>
+
+#define msb(x)                  ((u8)((u16) x >> 8))
+#define lsb(x)                  ((u8)((u16) x &  0x00FF))
+
+
+
+#define CMD_POWER_UP				0x01
+#define CMD_POWER_UP_A10_NRESP			1
+#define CMD_POWER_UP_A10_NARGS			5
+
+#define CMD_POWER_UP_A20_NRESP			1
+#define CMD_POWER_UP_A20_NARGS			5
+
+#define POWER_UP_DELAY_MS			110
+
+#define CMD_POWER_DOWN				0x11
+#define CMD_POWER_DOWN_A10_NRESP		1
+
+#define CMD_POWER_DOWN_A20_NRESP		1
+#define CMD_POWER_DOWN_A20_NARGS		1
+
+#define CMD_FUNC_INFO				0x12
+#define CMD_FUNC_INFO_NRESP			7
+
+#define CMD_SET_PROPERTY			0x13
+#define CMD_SET_PROPERTY_NARGS			5
+#define CMD_SET_PROPERTY_NRESP			1
+
+#define CMD_GET_PROPERTY			0x14
+#define CMD_GET_PROPERTY_NARGS			3
+#define CMD_GET_PROPERTY_NRESP			4
+
+#define CMD_AGC_STATUS				0x17
+#define CMD_AGC_STATUS_NRESP_A10		2
+#define CMD_AGC_STATUS_NRESP_A20                6
+
+#define PIN_CFG_BYTE(x) (0x7F & (x))
+#define CMD_DIG_AUDIO_PIN_CFG			0x18
+#define CMD_DIG_AUDIO_PIN_CFG_NARGS		4
+#define CMD_DIG_AUDIO_PIN_CFG_NRESP		5
+
+#define CMD_ZIF_PIN_CFG				0x19
+#define CMD_ZIF_PIN_CFG_NARGS			4
+#define CMD_ZIF_PIN_CFG_NRESP			5
+
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG		0x1A
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS	4
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP	5
+
+#define CMD_ANA_AUDIO_PIN_CFG			0x1B
+#define CMD_ANA_AUDIO_PIN_CFG_NARGS		1
+#define CMD_ANA_AUDIO_PIN_CFG_NRESP		2
+
+#define CMD_INTB_PIN_CFG			0x1C
+#define CMD_INTB_PIN_CFG_NARGS			2
+#define CMD_INTB_PIN_CFG_A10_NRESP		6
+#define CMD_INTB_PIN_CFG_A20_NRESP		3
+
+#define CMD_FM_TUNE_FREQ			0x30
+#define CMD_FM_TUNE_FREQ_A10_NARGS		5
+#define CMD_FM_TUNE_FREQ_A20_NARGS		3
+#define CMD_FM_TUNE_FREQ_NRESP			1
+
+#define CMD_FM_RSQ_STATUS			0x32
+
+#define CMD_FM_RSQ_STATUS_A10_NARGS		1
+#define CMD_FM_RSQ_STATUS_A10_NRESP		17
+#define CMD_FM_RSQ_STATUS_A30_NARGS		1
+#define CMD_FM_RSQ_STATUS_A30_NRESP		23
+
+
+#define CMD_FM_SEEK_START			0x31
+#define CMD_FM_SEEK_START_NARGS			1
+#define CMD_FM_SEEK_START_NRESP			1
+
+#define CMD_FM_RDS_STATUS			0x36
+#define CMD_FM_RDS_STATUS_NARGS			1
+#define CMD_FM_RDS_STATUS_NRESP			16
+
+#define CMD_FM_RDS_BLOCKCOUNT			0x37
+#define CMD_FM_RDS_BLOCKCOUNT_NARGS		1
+#define CMD_FM_RDS_BLOCKCOUNT_NRESP		8
+
+#define CMD_FM_PHASE_DIVERSITY			0x38
+#define CMD_FM_PHASE_DIVERSITY_NARGS		1
+#define CMD_FM_PHASE_DIVERSITY_NRESP		1
+
+#define CMD_FM_PHASE_DIV_STATUS			0x39
+#define CMD_FM_PHASE_DIV_STATUS_NRESP		2
+
+#define CMD_AM_TUNE_FREQ			0x40
+#define CMD_AM_TUNE_FREQ_NARGS			3
+#define CMD_AM_TUNE_FREQ_NRESP			1
+
+#define CMD_AM_RSQ_STATUS			0x42
+#define CMD_AM_RSQ_STATUS_NARGS			1
+#define CMD_AM_RSQ_STATUS_NRESP			13
+
+#define CMD_AM_SEEK_START			0x41
+#define CMD_AM_SEEK_START_NARGS			1
+#define CMD_AM_SEEK_START_NRESP			1
+
+
+#define CMD_AM_ACF_STATUS			0x45
+#define CMD_AM_ACF_STATUS_NRESP			6
+#define CMD_AM_ACF_STATUS_NARGS			1
+
+#define CMD_FM_ACF_STATUS			0x35
+#define CMD_FM_ACF_STATUS_NRESP			8
+#define CMD_FM_ACF_STATUS_NARGS			1
+
+#define CMD_MAX_ARGS_COUNT			(10)
+
+
+enum si476x_acf_status_report_bits {
+	SI476X_ACF_BLEND_INT	= (1 << 4),
+	SI476X_ACF_HIBLEND_INT	= (1 << 3),
+	SI476X_ACF_HICUT_INT	= (1 << 2),
+	SI476X_ACF_CHBW_INT	= (1 << 1),
+	SI476X_ACF_SOFTMUTE_INT	= (1 << 0),
+
+	SI476X_ACF_SMUTE	= (1 << 0),
+	SI476X_ACF_SMATTN	= 0b11111,
+	SI476X_ACF_PILOT	= (1 << 7),
+	SI476X_ACF_STBLEND	= ~SI476X_ACF_PILOT,
+};
+
+enum si476x_agc_status_report_bits {
+	SI476X_AGC_MXHI		= (1 << 5),
+	SI476X_AGC_MXLO		= (1 << 4),
+	SI476X_AGC_LNAHI	= (1 << 3),
+	SI476X_AGC_LNALO	= (1 << 2),
+};
+
+enum si476x_errors {
+	SI476X_ERR_BAD_COMMAND		= 0x10,
+	SI476X_ERR_BAD_ARG1		= 0x11,
+	SI476X_ERR_BAD_ARG2		= 0x12,
+	SI476X_ERR_BAD_ARG3		= 0x13,
+	SI476X_ERR_BAD_ARG4		= 0x14,
+	SI476X_ERR_BUSY			= 0x18,
+	SI476X_ERR_BAD_INTERNAL_MEMORY  = 0x20,
+	SI476X_ERR_BAD_PATCH		= 0x30,
+	SI476X_ERR_BAD_BOOT_MODE	= 0x31,
+	SI476X_ERR_BAD_PROPERTY		= 0x40,
+};
+
+static int si476x_core_parse_and_nag_about_error(struct si476x_core *core)
+{
+	int err;
+	char *cause;
+	u8 buffer[2];
+
+	if (core->revision != SI476X_REVISION_A10) {
+		err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV,
+					   buffer, sizeof(buffer));
+		if (err == sizeof(buffer)) {
+			switch (buffer[1]) {
+			case SI476X_ERR_BAD_COMMAND:
+				cause = "Bad command";
+				err = -EINVAL;
+				break;
+			case SI476X_ERR_BAD_ARG1:
+				cause = "Bad argument #1";
+				err = -EINVAL;
+				break;
+			case SI476X_ERR_BAD_ARG2:
+				cause = "Bad argument #2";
+				err = -EINVAL;
+				break;
+			case SI476X_ERR_BAD_ARG3:
+				cause = "Bad argument #3";
+				err = -EINVAL;
+				break;
+			case SI476X_ERR_BAD_ARG4:
+				cause = "Bad argument #4";
+				err = -EINVAL;
+				break;
+			case SI476X_ERR_BUSY:
+				cause = "Chip is busy";
+				err = -EBUSY;
+				break;
+			case SI476X_ERR_BAD_INTERNAL_MEMORY:
+				cause = "Bad internal memory";
+				err = -EIO;
+				break;
+			case SI476X_ERR_BAD_PATCH:
+				cause = "Bad patch";
+				err = -EINVAL;
+				break;
+			case SI476X_ERR_BAD_BOOT_MODE:
+				cause = "Bad boot mode";
+				err = -EINVAL;
+				break;
+			case SI476X_ERR_BAD_PROPERTY:
+				cause = "Bad property";
+				err = -EINVAL;
+				break;
+			default:
+				cause = "Unknown";
+				err = -EIO;
+			}
+
+			dev_err(&core->client->dev,
+				"[Chip error status]: %s\n", cause);
+		} else {
+			dev_err(&core->client->dev,
+				"Failed to fetch error code\n");
+			err = (err >= 0) ? -EIO : err;
+		}
+	} else {
+		err = -EIO;
+	}
+
+	return err;
+}
+
+/**
+ * si476x_core_send_command() - sends a command to si476x and waits its
+ * response
+ * @core:    si476x_device structure for the device we are
+ *            communicating with
+ * @command:  command id
+ * @args:     command arguments we are sending
+ * @argn:     actual size of @args
+ * @response: buffer to place the expected response from the device
+ * @respn:    actual size of @response
+ * @usecs:    amount of time to wait before reading the response (in
+ *            usecs)
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+static int si476x_core_send_command(struct si476x_core *core,
+				    const u8 command,
+				    const u8 args[],
+				    const int argn,
+				    u8 resp[],
+				    const int respn,
+				    const int usecs)
+{
+	struct i2c_client *client = core->client;
+	int err;
+	u8  data[CMD_MAX_ARGS_COUNT + 1];
+
+	if (argn > CMD_MAX_ARGS_COUNT) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	if (!client->adapter) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	/* First send the command and its arguments */
+	data[0] = command;
+	memcpy(&data[1], args, argn);
+	dev_dbg(&client->dev, "Command:\n %*ph\n", argn + 1, data);
+
+	err = si476x_core_i2c_xfer(core, SI476X_I2C_SEND,
+				   (char *) data, argn + 1);
+	if (err != argn + 1) {
+		dev_err(&core->client->dev,
+			"Error while sending command 0x%02x\n",
+			command);
+		err = (err >= 0) ? -EIO : err;
+		goto exit;
+	}
+	/* Set CTS to zero only after the command is send to avoid
+	 * possible racing conditions when working in polling mode */
+	atomic_set(&core->cts, 0);
+
+	/* if (unlikely(command == CMD_POWER_DOWN) */
+	if (!wait_event_timeout(core->command,
+				atomic_read(&core->cts),
+				usecs_to_jiffies(usecs) + 1))
+		dev_warn(&core->client->dev,
+			 "(%s) [CMD 0x%02x] Answer timeout.\n",
+			 __func__, command);
+
+	/*
+	  When working in polling mode, for some reason the tuner will
+	  report CTS bit as being set in the first status byte read,
+	  but all the consequtive ones will return zeros until the
+	  tuner is actually completed the POWER_UP command. To
+	  workaround that we wait for second CTS to be reported
+	 */
+	if (unlikely(!core->client->irq && command == CMD_POWER_UP)) {
+		if (!wait_event_timeout(core->command,
+					atomic_read(&core->cts),
+					usecs_to_jiffies(usecs) + 1))
+			dev_warn(&core->client->dev,
+				 "(%s) Power up took too much time.\n",
+				 __func__);
+	}
+
+	/* Then get the response */
+	err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV, resp, respn);
+	if (err != respn) {
+		dev_err(&core->client->dev,
+			"Error while reading response for command 0x%02x\n",
+			command);
+		err = (err >= 0) ? -EIO : err;
+		goto exit;
+	}
+	dev_dbg(&client->dev, "Response:\n %*ph\n", respn, resp);
+
+	err = 0;
+
+	if (resp[0] & SI476X_ERR) {
+		dev_err(&core->client->dev,
+			"[CMD 0x%02x] Chip set error flag\n", command);
+		err = si476x_core_parse_and_nag_about_error(core);
+		goto exit;
+	}
+
+	if (!(resp[0] & SI476X_CTS))
+		err = -EBUSY;
+exit:
+	return err;
+}
+
+static int si476x_cmd_clear_stc(struct si476x_core *core)
+{
+	int err;
+	struct si476x_rsq_status_args args = {
+		.primary	= false,
+		.rsqack		= false,
+		.attune		= false,
+		.cancel		= false,
+		.stcack		= true,
+	};
+
+	switch (core->power_up_parameters.func) {
+	case SI476X_FUNC_FM_RECEIVER:
+		err = si476x_core_cmd_fm_rsq_status(core, &args, NULL);
+		break;
+	case SI476X_FUNC_AM_RECEIVER:
+		err = si476x_core_cmd_am_rsq_status(core, &args, NULL);
+		break;
+	default:
+		err = -EINVAL;
+	}
+
+	return err;
+}
+
+static int si476x_cmd_tune_seek_freq(struct si476x_core *core,
+				     uint8_t cmd,
+				     const uint8_t args[], size_t argn,
+				     uint8_t *resp, size_t respn)
+{
+	int err;
+
+
+	atomic_set(&core->stc, 0);
+	err = si476x_core_send_command(core, cmd, args, argn, resp, respn,
+				       SI476X_TIMEOUT_TUNE);
+	if (!err) {
+		wait_event_killable(core->tuning,
+				    atomic_read(&core->stc));
+		si476x_cmd_clear_stc(core);
+	}
+
+	return err;
+}
+
+/**
+ * si476x_cmd_func_info() - send 'FUNC_INFO' command to the device
+ * @core: device to send the command to
+ * @info:  struct si476x_func_info to fill all the information
+ *         returned by the command
+ *
+ * The command requests the firmware and patch version for currently
+ * loaded firmware (dependent on the function of the device FM/AM/WB)
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+int si476x_core_cmd_func_info(struct si476x_core *core,
+			      struct si476x_func_info *info)
+{
+	int err;
+	u8  resp[CMD_FUNC_INFO_NRESP];
+
+	err = si476x_core_send_command(core, CMD_FUNC_INFO,
+				       NULL, 0,
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+
+	info->firmware.major    = resp[1];
+	info->firmware.minor[0] = resp[2];
+	info->firmware.minor[1] = resp[3];
+
+	info->patch_id = ((u16) resp[4] << 8) | resp[5];
+	info->func     = resp[6];
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_func_info);
+
+/**
+ * si476x_cmd_set_property() - send 'SET_PROPERTY' command to the device
+ * @core:    device to send the command to
+ * @property: property address
+ * @value:    property value
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+int si476x_core_cmd_set_property(struct si476x_core *core,
+				 u16 property, u16 value)
+{
+	u8       resp[CMD_SET_PROPERTY_NRESP];
+	const u8 args[CMD_SET_PROPERTY_NARGS] = {
+		0x00,
+		msb(property),
+		lsb(property),
+		msb(value),
+		lsb(value),
+	};
+
+	return si476x_core_send_command(core, CMD_SET_PROPERTY,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_set_property);
+
+/**
+ * si476x_cmd_get_property() - send 'GET_PROPERTY' command to the device
+ * @core:    device to send the command to
+ * @property: property address
+ *
+ * Function return the value of property as u16 on success or a
+ * negative error on failure
+ */
+int si476x_core_cmd_get_property(struct si476x_core *core, u16 property)
+{
+	int err;
+	u8       resp[CMD_GET_PROPERTY_NRESP];
+	const u8 args[CMD_GET_PROPERTY_NARGS] = {
+		0x00,
+		msb(property),
+		lsb(property),
+	};
+
+	err = si476x_core_send_command(core, CMD_GET_PROPERTY,
+				       args, ARRAY_SIZE(args),
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	if (err < 0)
+		return err;
+	else
+		return be16_to_cpup((__be16 *)(resp + 2));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
+
+/**
+ * si476x_cmd_dig_audio_pin_cfg() - send 'DIG_AUDIO_PIN_CFG' command to
+ * the device
+ * @core: device to send the command to
+ * @dclk:  DCLK pin function configuration:
+ *	   #SI476X_DCLK_NOOP     - do not modify the behaviour
+ *         #SI476X_DCLK_TRISTATE - put the pin in tristate condition,
+ *                                 enable 1MOhm pulldown
+ *         #SI476X_DCLK_DAUDIO   - set the pin to be a part of digital
+ *                                 audio interface
+ * @dfs:   DFS pin function configuration:
+ *         #SI476X_DFS_NOOP      - do not modify the behaviour
+ *         #SI476X_DFS_TRISTATE  - put the pin in tristate condition,
+ *                             enable 1MOhm pulldown
+ *      SI476X_DFS_DAUDIO    - set the pin to be a part of digital
+ *                             audio interface
+ * @dout - DOUT pin function configuration:
+ *      SI476X_DOUT_NOOP       - do not modify the behaviour
+ *      SI476X_DOUT_TRISTATE   - put the pin in tristate condition,
+ *                               enable 1MOhm pulldown
+ *      SI476X_DOUT_I2S_OUTPUT - set this pin to be digital out on I2S
+ *                               port 1
+ *      SI476X_DOUT_I2S_INPUT  - set this pin to be digital in on I2S
+ *                               port 1
+ * @xout - XOUT pin function configuration:
+ *	SI476X_XOUT_NOOP        - do not modify the behaviour
+ *      SI476X_XOUT_TRISTATE    - put the pin in tristate condition,
+ *                                enable 1MOhm pulldown
+ *      SI476X_XOUT_I2S_INPUT   - set this pin to be digital in on I2S
+ *                                port 1
+ *      SI476X_XOUT_MODE_SELECT - set this pin to be the input that
+ *                                selects the mode of the I2S audio
+ *                                combiner (analog or HD)
+ *                                [SI4761/63/65/67 Only]
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_dig_audio_pin_cfg(struct  si476x_core *core,
+				      enum si476x_dclk_config dclk,
+				      enum si476x_dfs_config  dfs,
+				      enum si476x_dout_config dout,
+				      enum si476x_xout_config xout)
+{
+	u8       resp[CMD_DIG_AUDIO_PIN_CFG_NRESP];
+	const u8 args[CMD_DIG_AUDIO_PIN_CFG_NARGS] = {
+		PIN_CFG_BYTE(dclk),
+		PIN_CFG_BYTE(dfs),
+		PIN_CFG_BYTE(dout),
+		PIN_CFG_BYTE(xout),
+	};
+
+	return si476x_core_send_command(core, CMD_DIG_AUDIO_PIN_CFG,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg);
+
+/**
+ * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND'
+ * @core - device to send the command to
+ * @iqclk - IQCL pin function configuration:
+ *       SI476X_IQCLK_NOOP     - do not modify the behaviour
+ *       SI476X_IQCLK_TRISTATE - put the pin in tristate condition,
+ *                               enable 1MOhm pulldown
+ *       SI476X_IQCLK_IQ       - set pin to be a part of I/Q interace
+ *                               in master mode
+ * @iqfs - IQFS pin function configuration:
+ *       SI476X_IQFS_NOOP     - do not modify the behaviour
+ *       SI476X_IQFS_TRISTATE - put the pin in tristate condition,
+ *                              enable 1MOhm pulldown
+ *       SI476X_IQFS_IQ       - set pin to be a part of I/Q interace
+ *                              in master mode
+ * @iout - IOUT pin function configuration:
+ *       SI476X_IOUT_NOOP     - do not modify the behaviour
+ *       SI476X_IOUT_TRISTATE - put the pin in tristate condition,
+ *                              enable 1MOhm pulldown
+ *       SI476X_IOUT_OUTPUT   - set pin to be I out
+ * @qout - QOUT pin function configuration:
+ *       SI476X_QOUT_NOOP     - do not modify the behaviour
+ *       SI476X_QOUT_TRISTATE - put the pin in tristate condition,
+ *                              enable 1MOhm pulldown
+ *       SI476X_QOUT_OUTPUT   - set pin to be Q out
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_zif_pin_cfg(struct si476x_core *core,
+				enum si476x_iqclk_config iqclk,
+				enum si476x_iqfs_config iqfs,
+				enum si476x_iout_config iout,
+				enum si476x_qout_config qout)
+{
+	u8       resp[CMD_ZIF_PIN_CFG_NRESP];
+	const u8 args[CMD_ZIF_PIN_CFG_NARGS] = {
+		PIN_CFG_BYTE(iqclk),
+		PIN_CFG_BYTE(iqfs),
+		PIN_CFG_BYTE(iout),
+		PIN_CFG_BYTE(qout),
+	};
+
+	return si476x_core_send_command(core, CMD_ZIF_PIN_CFG,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg);
+
+/**
+ * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send
+ * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device
+ * @core - device to send the command to
+ * @icin - ICIN pin function configuration:
+ *      SI476X_ICIN_NOOP      - do not modify the behaviour
+ *      SI476X_ICIN_TRISTATE  - put the pin in tristate condition,
+ *                              enable 1MOhm pulldown
+ *      SI476X_ICIN_GPO1_HIGH - set pin to be an output, drive it high
+ *      SI476X_ICIN_GPO1_LOW  - set pin to be an output, drive it low
+ *      SI476X_ICIN_IC_LINK   - set the pin to be a part of Inter-Chip link
+ * @icip - ICIP pin function configuration:
+ *      SI476X_ICIP_NOOP      - do not modify the behaviour
+ *      SI476X_ICIP_TRISTATE  - put the pin in tristate condition,
+ *                              enable 1MOhm pulldown
+ *      SI476X_ICIP_GPO1_HIGH - set pin to be an output, drive it high
+ *      SI476X_ICIP_GPO1_LOW  - set pin to be an output, drive it low
+ *      SI476X_ICIP_IC_LINK   - set the pin to be a part of Inter-Chip link
+ * @icon - ICON pin function configuration:
+ *      SI476X_ICON_NOOP     - do not modify the behaviour
+ *      SI476X_ICON_TRISTATE - put the pin in tristate condition,
+ *                             enable 1MOhm pulldown
+ *      SI476X_ICON_I2S      - set the pin to be a part of audio
+ *                             interface in slave mode (DCLK)
+ *      SI476X_ICON_IC_LINK  - set the pin to be a part of Inter-Chip link
+ * @icop - ICOP pin function configuration:
+ *      SI476X_ICOP_NOOP     - do not modify the behaviour
+ *      SI476X_ICOP_TRISTATE - put the pin in tristate condition,
+ *                             enable 1MOhm pulldown
+ *      SI476X_ICOP_I2S      - set the pin to be a part of audio
+ *                             interface in slave mode (DOUT)
+ *                             [Si4761/63/65/67 Only]
+ *      SI476X_ICOP_IC_LINK  - set the pin to be a part of Inter-Chip link
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *core,
+					    enum si476x_icin_config icin,
+					    enum si476x_icip_config icip,
+					    enum si476x_icon_config icon,
+					    enum si476x_icop_config icop)
+{
+	u8       resp[CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP];
+	const u8 args[CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS] = {
+		PIN_CFG_BYTE(icin),
+		PIN_CFG_BYTE(icip),
+		PIN_CFG_BYTE(icon),
+		PIN_CFG_BYTE(icop),
+	};
+
+	return si476x_core_send_command(core, CMD_IC_LINK_GPO_CTL_PIN_CFG,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_ic_link_gpo_ctl_pin_cfg);
+
+/**
+ * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the
+ * device
+ * @core - device to send the command to
+ * @lrout - LROUT pin function configuration:
+ *       SI476X_LROUT_NOOP     - do not modify the behaviour
+ *       SI476X_LROUT_TRISTATE - put the pin in tristate condition,
+ *                               enable 1MOhm pulldown
+ *       SI476X_LROUT_AUDIO    - set pin to be audio output
+ *       SI476X_LROUT_MPX      - set pin to be MPX output
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *core,
+				      enum si476x_lrout_config lrout)
+{
+	u8       resp[CMD_ANA_AUDIO_PIN_CFG_NRESP];
+	const u8 args[CMD_ANA_AUDIO_PIN_CFG_NARGS] = {
+		PIN_CFG_BYTE(lrout),
+	};
+
+	return si476x_core_send_command(core, CMD_ANA_AUDIO_PIN_CFG,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_ana_audio_pin_cfg);
+
+
+/**
+ * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device
+ * @core - device to send the command to
+ * @intb - INTB pin function configuration:
+ *      SI476X_INTB_NOOP     - do not modify the behaviour
+ *      SI476X_INTB_TRISTATE - put the pin in tristate condition,
+ *                             enable 1MOhm pulldown
+ *      SI476X_INTB_DAUDIO   - set pin to be a part of digital
+ *                             audio interface in slave mode
+ *      SI476X_INTB_IRQ      - set pin to be an interrupt request line
+ * @a1 - A1 pin function configuration:
+ *      SI476X_A1_NOOP     - do not modify the behaviour
+ *      SI476X_A1_TRISTATE - put the pin in tristate condition,
+ *                           enable 1MOhm pulldown
+ *      SI476X_A1_IRQ      - set pin to be an interrupt request line
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+static int si476x_core_cmd_intb_pin_cfg_a10(struct si476x_core *core,
+					    enum si476x_intb_config intb,
+					    enum si476x_a1_config a1)
+{
+	u8       resp[CMD_INTB_PIN_CFG_A10_NRESP];
+	const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
+		PIN_CFG_BYTE(intb),
+		PIN_CFG_BYTE(a1),
+	};
+
+	return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_intb_pin_cfg_a20(struct si476x_core *core,
+					    enum si476x_intb_config intb,
+					    enum si476x_a1_config a1)
+{
+	u8       resp[CMD_INTB_PIN_CFG_A20_NRESP];
+	const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
+		PIN_CFG_BYTE(intb),
+		PIN_CFG_BYTE(a1),
+	};
+
+	return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+
+
+
+/**
+ * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the
+ * device
+ * @core  - device to send the command to
+ * @rsqack - if set command clears RSQINT, SNRINT, SNRLINT, RSSIHINT,
+ *           RSSSILINT, BLENDINT, MULTHINT and MULTLINT
+ * @attune - when set the values in the status report are the values
+ *           that were calculated at tune
+ * @cancel - abort ongoing seek/tune opertation
+ * @stcack - clear the STCINT bin in status register
+ * @report - all signal quality information retured by the command
+ *           (if NULL then the output of the command is ignored)
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_am_rsq_status(struct si476x_core *core,
+				  struct si476x_rsq_status_args *rsqargs,
+				  struct si476x_rsq_status_report *report)
+{
+	int err;
+	u8       resp[CMD_AM_RSQ_STATUS_NRESP];
+	const u8 args[CMD_AM_RSQ_STATUS_NARGS] = {
+		rsqargs->rsqack << 3 | rsqargs->attune << 2 |
+		rsqargs->cancel << 1 | rsqargs->stcack,
+	};
+
+	err = si476x_core_send_command(core, CMD_AM_RSQ_STATUS,
+				       args, ARRAY_SIZE(args),
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	/*
+	 * Besides getting received signal quality information this
+	 * command can be used to just acknowledge different interrupt
+	 * flags in those cases it is useless to copy and parse
+	 * received data so user can pass NULL, and thus avoid
+	 * unnecessary copying.
+	 */
+	if (!report)
+		return err;
+
+	report->snrhint		= 0b00001000 & resp[1];
+	report->snrlint		= 0b00000100 & resp[1];
+	report->rssihint	= 0b00000010 & resp[1];
+	report->rssilint	= 0b00000001 & resp[1];
+
+	report->bltf		= 0b10000000 & resp[2];
+	report->snr_ready	= 0b00100000 & resp[2];
+	report->rssiready	= 0b00001000 & resp[2];
+	report->afcrl		= 0b00000010 & resp[2];
+	report->valid		= 0b00000001 & resp[2];
+
+	report->readfreq	= be16_to_cpup((__be16 *)(resp + 3));
+	report->freqoff		= resp[5];
+	report->rssi		= resp[6];
+	report->snr		= resp[7];
+	report->lassi		= resp[9];
+	report->hassi		= resp[10];
+	report->mult		= resp[11];
+	report->dev		= resp[12];
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_rsq_status);
+
+int si476x_core_cmd_fm_acf_status(struct si476x_core *core,
+			     struct si476x_acf_status_report *report)
+{
+	int err;
+	u8       resp[CMD_FM_ACF_STATUS_NRESP];
+	const u8 args[CMD_FM_ACF_STATUS_NARGS] = {
+		0x0,
+	};
+
+	if (!report)
+		return -EINVAL;
+
+	err = si476x_core_send_command(core, CMD_FM_ACF_STATUS,
+				       args, ARRAY_SIZE(args),
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	if (err < 0)
+		return err;
+
+	report->blend_int	= resp[1] & SI476X_ACF_BLEND_INT;
+	report->hblend_int	= resp[1] & SI476X_ACF_HIBLEND_INT;
+	report->hicut_int	= resp[1] & SI476X_ACF_HICUT_INT;
+	report->chbw_int	= resp[1] & SI476X_ACF_CHBW_INT;
+	report->softmute_int	= resp[1] & SI476X_ACF_SOFTMUTE_INT;
+	report->smute		= resp[2] & SI476X_ACF_SMUTE;
+	report->smattn		= resp[3] & SI476X_ACF_SMATTN;
+	report->chbw		= resp[4];
+	report->hicut		= resp[5];
+	report->hiblend		= resp[6];
+	report->pilot		= resp[7] & SI476X_ACF_PILOT;
+	report->stblend		= resp[7] & SI476X_ACF_STBLEND;
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_acf_status);
+
+int si476x_core_cmd_am_acf_status(struct si476x_core *core,
+				  struct si476x_acf_status_report *report)
+{
+	int err;
+	u8       resp[CMD_AM_ACF_STATUS_NRESP];
+	const u8 args[CMD_AM_ACF_STATUS_NARGS] = {
+		0x0,
+	};
+
+	if (!report)
+		return -EINVAL;
+
+	err = si476x_core_send_command(core, CMD_AM_ACF_STATUS,
+				       args, ARRAY_SIZE(args),
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	if (err < 0)
+		return err;
+
+	report->blend_int	= resp[1] & SI476X_ACF_BLEND_INT;
+	report->hblend_int	= resp[1] & SI476X_ACF_HIBLEND_INT;
+	report->hicut_int	= resp[1] & SI476X_ACF_HICUT_INT;
+	report->chbw_int	= resp[1] & SI476X_ACF_CHBW_INT;
+	report->softmute_int	= resp[1] & SI476X_ACF_SOFTMUTE_INT;
+	report->smute		= resp[2] & SI476X_ACF_SMUTE;
+	report->smattn		= resp[3] & SI476X_ACF_SMATTN;
+	report->chbw		= resp[4];
+	report->hicut		= resp[5];
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_acf_status);
+
+
+/**
+ * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the
+ * device
+ * @core  - device to send the command to
+ * @seekup - if set the direction of the search is 'up'
+ * @wrap   - if set seek wraps when hitting band limit
+ *
+ * This function begins search for a valid station. The station is
+ * considered valid when 'FM_VALID_SNR_THRESHOLD' and
+ * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
+ * are met.
+} *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_fm_seek_start(struct si476x_core *core,
+				  bool seekup, bool wrap)
+{
+	u8       resp[CMD_FM_SEEK_START_NRESP];
+	const u8 args[CMD_FM_SEEK_START_NARGS] = {
+		seekup << 3 | wrap << 2,
+	};
+
+	return si476x_cmd_tune_seek_freq(core, CMD_FM_SEEK_START,
+					 args, sizeof(args),
+					 resp, sizeof(resp));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_seek_start);
+
+/**
+ * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the
+ * device
+ * @core - device to send the command to
+ * @status_only - if set the data is not removed from RDSFIFO,
+ *                RDSFIFOUSED is not decremented and data in all the
+ *                rest RDS data contains the last valid info received
+ * @mtfifo if set the command clears RDS receive FIFO
+ * @intack if set the command clards the RDSINT bit.
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_fm_rds_status(struct si476x_core *core,
+				  bool status_only,
+				  bool mtfifo,
+				  bool intack,
+				  struct si476x_rds_status_report *report)
+{
+	int err;
+	u8       resp[CMD_FM_RDS_STATUS_NRESP];
+	const u8 args[CMD_FM_RDS_STATUS_NARGS] = {
+		status_only << 2 | mtfifo << 1 | intack,
+	};
+
+	err = si476x_core_send_command(core, CMD_FM_RDS_STATUS,
+				       args, ARRAY_SIZE(args),
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	/*
+	 * Besides getting RDS status information this command can be
+	 * used to just acknowledge different interrupt flags in those
+	 * cases it is useless to copy and parse received data so user
+	 * can pass NULL, and thus avoid unnecessary copying.
+	 */
+	if (err < 0 || report == NULL)
+		return err;
+
+	report->rdstpptyint	= 0b00010000 & resp[1];
+	report->rdspiint	= 0b00001000 & resp[1];
+	report->rdssyncint	= 0b00000010 & resp[1];
+	report->rdsfifoint	= 0b00000001 & resp[1];
+
+	report->tpptyvalid	= 0b00010000 & resp[2];
+	report->pivalid		= 0b00001000 & resp[2];
+	report->rdssync		= 0b00000010 & resp[2];
+	report->rdsfifolost	= 0b00000001 & resp[2];
+
+	report->tp		= 0b00100000 & resp[3];
+	report->pty		= 0b00011111 & resp[3];
+
+	report->pi		= be16_to_cpup((__be16 *)(resp + 4));
+	report->rdsfifoused	= resp[6];
+
+	report->ble[V4L2_RDS_BLOCK_A]	= 0b11000000 & resp[7];
+	report->ble[V4L2_RDS_BLOCK_B]	= 0b00110000 & resp[7];
+	report->ble[V4L2_RDS_BLOCK_C]	= 0b00001100 & resp[7];
+	report->ble[V4L2_RDS_BLOCK_D]	= 0b00000011 & resp[7];
+
+	report->rds[V4L2_RDS_BLOCK_A].block = V4L2_RDS_BLOCK_A;
+	report->rds[V4L2_RDS_BLOCK_A].msb = resp[8];
+	report->rds[V4L2_RDS_BLOCK_A].lsb = resp[9];
+
+	report->rds[V4L2_RDS_BLOCK_B].block = V4L2_RDS_BLOCK_B;
+	report->rds[V4L2_RDS_BLOCK_B].msb = resp[10];
+	report->rds[V4L2_RDS_BLOCK_B].lsb = resp[11];
+
+	report->rds[V4L2_RDS_BLOCK_C].block = V4L2_RDS_BLOCK_C;
+	report->rds[V4L2_RDS_BLOCK_C].msb = resp[12];
+	report->rds[V4L2_RDS_BLOCK_C].lsb = resp[13];
+
+	report->rds[V4L2_RDS_BLOCK_D].block = V4L2_RDS_BLOCK_D;
+	report->rds[V4L2_RDS_BLOCK_D].msb = resp[14];
+	report->rds[V4L2_RDS_BLOCK_D].lsb = resp[15];
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_status);
+
+int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *core,
+				bool clear,
+				struct si476x_rds_blockcount_report *report)
+{
+	int err;
+	u8       resp[CMD_FM_RDS_BLOCKCOUNT_NRESP];
+	const u8 args[CMD_FM_RDS_BLOCKCOUNT_NARGS] = {
+		clear,
+	};
+
+	if (!report)
+		return -EINVAL;
+
+	err = si476x_core_send_command(core, CMD_FM_RDS_BLOCKCOUNT,
+				       args, ARRAY_SIZE(args),
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+
+	if (!err) {
+		report->expected	= be16_to_cpup((__be16 *)(resp + 2));
+		report->received	= be16_to_cpup((__be16 *)(resp + 4));
+		report->uncorrectable	= be16_to_cpup((__be16 *)(resp + 6));
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_blockcount);
+
+int si476x_core_cmd_fm_phase_diversity(struct si476x_core *core,
+				       enum si476x_phase_diversity_mode mode)
+{
+	u8       resp[CMD_FM_PHASE_DIVERSITY_NRESP];
+	const u8 args[CMD_FM_PHASE_DIVERSITY_NARGS] = {
+		mode & 0b111,
+	};
+
+	return si476x_core_send_command(core, CMD_FM_PHASE_DIVERSITY,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_diversity);
+/**
+ * si476x_core_cmd_fm_phase_div_status() - get the phase diversity
+ * status
+ *
+ * @core: si476x device
+ *
+ * NOTE caller must hold core lock
+ *
+ * Function returns the value of the status bit in case of success and
+ * negative error code in case of failre.
+ */
+int si476x_core_cmd_fm_phase_div_status(struct si476x_core *core)
+{
+	int err;
+	u8 resp[CMD_FM_PHASE_DIV_STATUS_NRESP];
+
+	err = si476x_core_send_command(core, CMD_FM_PHASE_DIV_STATUS,
+				       NULL, 0,
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+
+	return (err < 0) ? err : resp[1];
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_div_status);
+
+
+/**
+ * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the
+ * device
+ * @core  - device to send the command to
+ * @seekup - if set the direction of the search is 'up'
+ * @wrap   - if set seek wraps when hitting band limit
+ *
+ * This function begins search for a valid station. The station is
+ * considered valid when 'FM_VALID_SNR_THRESHOLD' and
+ * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
+ * are met.
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_am_seek_start(struct si476x_core *core,
+				  bool seekup, bool wrap)
+{
+	u8       resp[CMD_AM_SEEK_START_NRESP];
+	const u8 args[CMD_AM_SEEK_START_NARGS] = {
+		seekup << 3 | wrap << 2,
+	};
+
+	return si476x_cmd_tune_seek_freq(core,  CMD_AM_SEEK_START,
+					 args, sizeof(args),
+					 resp, sizeof(resp));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_seek_start);
+
+
+
+static int si476x_core_cmd_power_up_a10(struct si476x_core *core,
+					struct si476x_power_up_args *puargs)
+{
+	u8       resp[CMD_POWER_UP_A10_NRESP];
+	const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
+	const bool ctsen  = (core->client->irq != 0);
+	const u8 args[CMD_POWER_UP_A10_NARGS] = {
+		0xF7,		/* Reserved, always 0xF7 */
+		0x3F & puargs->xcload,	/* First two bits are reserved to be
+				 * zeros */
+		ctsen << 7 | intsel << 6 | 0x07, /* Last five bits
+						   * are reserved to
+						   * be written as 0x7 */
+		puargs->func << 4 | puargs->freq,
+		0x11,		/* Reserved, always 0x11 */
+	};
+
+	return si476x_core_send_command(core, CMD_POWER_UP,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_TIMEOUT_POWER_UP);
+}
+
+static int si476x_core_cmd_power_up_a20(struct si476x_core *core,
+				 struct si476x_power_up_args *puargs)
+{
+	u8       resp[CMD_POWER_UP_A20_NRESP];
+	const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
+	const bool ctsen  = (core->client->irq != 0);
+	const u8 args[CMD_POWER_UP_A20_NARGS] = {
+		puargs->ibias6x << 7 | puargs->xstart,
+		0x3F & puargs->xcload,	/* First two bits are reserved to be
+					 * zeros */
+		ctsen << 7 | intsel << 6 | puargs->fastboot << 5 |
+		puargs->xbiashc << 3 | puargs->xbias,
+		puargs->func << 4 | puargs->freq,
+		0x10 | puargs->xmode,
+	};
+
+	return si476x_core_send_command(core, CMD_POWER_UP,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_TIMEOUT_POWER_UP);
+}
+
+static int si476x_core_cmd_power_down_a10(struct si476x_core *core,
+					  struct si476x_power_down_args *pdargs)
+{
+	u8 resp[CMD_POWER_DOWN_A10_NRESP];
+
+	return si476x_core_send_command(core, CMD_POWER_DOWN,
+					NULL, 0,
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_power_down_a20(struct si476x_core *core,
+					  struct si476x_power_down_args *pdargs)
+{
+	u8 resp[CMD_POWER_DOWN_A20_NRESP];
+	const u8 args[CMD_POWER_DOWN_A20_NARGS] = {
+		pdargs->xosc,
+	};
+	return si476x_core_send_command(core, CMD_POWER_DOWN,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_am_tune_freq_a10(struct si476x_core *core,
+					struct si476x_tune_freq_args *tuneargs)
+{
+
+	const int am_freq = tuneargs->freq;
+	u8       resp[CMD_AM_TUNE_FREQ_NRESP];
+	const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
+		(tuneargs->hd << 6),
+		msb(am_freq),
+		lsb(am_freq),
+	};
+
+	return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ, args,
+					 sizeof(args),
+					 resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_am_tune_freq_a20(struct si476x_core *core,
+					struct si476x_tune_freq_args *tuneargs)
+{
+	const int am_freq = tuneargs->freq;
+	u8       resp[CMD_AM_TUNE_FREQ_NRESP];
+	const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
+		(tuneargs->zifsr << 6) | (tuneargs->injside & 0b11),
+		msb(am_freq),
+		lsb(am_freq),
+	};
+
+	return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ,
+					 args, sizeof(args),
+					 resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core,
+					struct si476x_rsq_status_args *rsqargs,
+					struct si476x_rsq_status_report *report)
+{
+	int err;
+	u8       resp[CMD_FM_RSQ_STATUS_A10_NRESP];
+	const u8 args[CMD_FM_RSQ_STATUS_A10_NARGS] = {
+		rsqargs->rsqack << 3 | rsqargs->attune << 2 |
+		rsqargs->cancel << 1 | rsqargs->stcack,
+	};
+
+	err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+				       args, ARRAY_SIZE(args),
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	/*
+	 * Besides getting received signal quality information this
+	 * command can be used to just acknowledge different interrupt
+	 * flags in those cases it is useless to copy and parse
+	 * received data so user can pass NULL, and thus avoid
+	 * unnecessary copying.
+	 */
+	if (err < 0 || report == NULL)
+		return err;
+
+	report->multhint	= 0b10000000 & resp[1];
+	report->multlint	= 0b01000000 & resp[1];
+	report->snrhint		= 0b00001000 & resp[1];
+	report->snrlint		= 0b00000100 & resp[1];
+	report->rssihint	= 0b00000010 & resp[1];
+	report->rssilint	= 0b00000001 & resp[1];
+
+	report->bltf		= 0b10000000 & resp[2];
+	report->snr_ready	= 0b00100000 & resp[2];
+	report->rssiready	= 0b00001000 & resp[2];
+	report->afcrl		= 0b00000010 & resp[2];
+	report->valid		= 0b00000001 & resp[2];
+
+	report->readfreq	= be16_to_cpup((__be16 *)(resp + 3));
+	report->freqoff		= resp[5];
+	report->rssi		= resp[6];
+	report->snr		= resp[7];
+	report->lassi		= resp[9];
+	report->hassi		= resp[10];
+	report->mult		= resp[11];
+	report->dev		= resp[12];
+	report->readantcap	= be16_to_cpup((__be16 *)(resp + 13));
+	report->assi		= resp[15];
+	report->usn		= resp[16];
+
+	return err;
+}
+
+static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core,
+					     struct si476x_rsq_status_args *rsqargs,
+					     struct si476x_rsq_status_report *report)
+{
+	int err;
+	u8       resp[CMD_FM_RSQ_STATUS_A10_NRESP];
+	const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
+		rsqargs->primary << 4 | rsqargs->rsqack << 3 |
+		rsqargs->attune  << 2 | rsqargs->cancel << 1 |
+		rsqargs->stcack,
+	};
+
+	err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+				       args, ARRAY_SIZE(args),
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	/*
+	 * Besides getting received signal quality information this
+	 * command can be used to just acknowledge different interrupt
+	 * flags in those cases it is useless to copy and parse
+	 * received data so user can pass NULL, and thus avoid
+	 * unnecessary copying.
+	 */
+	if (err < 0 || report == NULL)
+		return err;
+
+	report->multhint	= 0b10000000 & resp[1];
+	report->multlint	= 0b01000000 & resp[1];
+	report->snrhint		= 0b00001000 & resp[1];
+	report->snrlint		= 0b00000100 & resp[1];
+	report->rssihint	= 0b00000010 & resp[1];
+	report->rssilint	= 0b00000001 & resp[1];
+
+	report->bltf		= 0b10000000 & resp[2];
+	report->snr_ready	= 0b00100000 & resp[2];
+	report->rssiready	= 0b00001000 & resp[2];
+	report->afcrl		= 0b00000010 & resp[2];
+	report->valid		= 0b00000001 & resp[2];
+
+	report->readfreq	= be16_to_cpup((__be16 *)(resp + 3));
+	report->freqoff		= resp[5];
+	report->rssi		= resp[6];
+	report->snr		= resp[7];
+	report->lassi		= resp[9];
+	report->hassi		= resp[10];
+	report->mult		= resp[11];
+	report->dev		= resp[12];
+	report->readantcap	= be16_to_cpup((__be16 *)(resp + 13));
+	report->assi		= resp[15];
+	report->usn		= resp[16];
+
+	return err;
+}
+
+
+static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core,
+					struct si476x_rsq_status_args *rsqargs,
+					struct si476x_rsq_status_report *report)
+{
+	int err;
+	u8       resp[CMD_FM_RSQ_STATUS_A30_NRESP];
+	const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
+		rsqargs->primary << 4 | rsqargs->rsqack << 3 |
+		rsqargs->attune << 2 | rsqargs->cancel << 1 |
+		rsqargs->stcack,
+	};
+
+	err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+				       args, ARRAY_SIZE(args),
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	/*
+	 * Besides getting received signal quality information this
+	 * command can be used to just acknowledge different interrupt
+	 * flags in those cases it is useless to copy and parse
+	 * received data so user can pass NULL, and thus avoid
+	 * unnecessary copying.
+	 */
+	if (err < 0 || report == NULL)
+		return err;
+
+	report->multhint	= 0b10000000 & resp[1];
+	report->multlint	= 0b01000000 & resp[1];
+	report->snrhint		= 0b00001000 & resp[1];
+	report->snrlint		= 0b00000100 & resp[1];
+	report->rssihint	= 0b00000010 & resp[1];
+	report->rssilint	= 0b00000001 & resp[1];
+
+	report->bltf		= 0b10000000 & resp[2];
+	report->snr_ready	= 0b00100000 & resp[2];
+	report->rssiready	= 0b00001000 & resp[2];
+	report->injside         = 0b00000100 & resp[2];
+	report->afcrl		= 0b00000010 & resp[2];
+	report->valid		= 0b00000001 & resp[2];
+
+	report->readfreq	= be16_to_cpup((__be16 *)(resp + 3));
+	report->freqoff		= resp[5];
+	report->rssi		= resp[6];
+	report->snr		= resp[7];
+	report->issi		= resp[8];
+	report->lassi		= resp[9];
+	report->hassi		= resp[10];
+	report->mult		= resp[11];
+	report->dev		= resp[12];
+	report->readantcap	= be16_to_cpup((__be16 *)(resp + 13));
+	report->assi		= resp[15];
+	report->usn		= resp[16];
+
+	report->pilotdev	= resp[17];
+	report->rdsdev		= resp[18];
+	report->assidev		= resp[19];
+	report->strongdev	= resp[20];
+	report->rdspi		= be16_to_cpup((__be16 *)(resp + 21));
+
+	return err;
+}
+
+static int si476x_core_cmd_fm_tune_freq_a10(struct si476x_core *core,
+					struct si476x_tune_freq_args *tuneargs)
+{
+	u8       resp[CMD_FM_TUNE_FREQ_NRESP];
+	const u8 args[CMD_FM_TUNE_FREQ_A10_NARGS] = {
+		(tuneargs->hd << 6) | (tuneargs->tunemode << 4)
+		| (tuneargs->smoothmetrics << 2),
+		msb(tuneargs->freq),
+		lsb(tuneargs->freq),
+		msb(tuneargs->antcap),
+		lsb(tuneargs->antcap)
+	};
+
+	return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ,
+					 args, sizeof(args),
+					 resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_fm_tune_freq_a20(struct si476x_core *core,
+					struct si476x_tune_freq_args *tuneargs)
+{
+	u8       resp[CMD_FM_TUNE_FREQ_NRESP];
+	const u8 args[CMD_FM_TUNE_FREQ_A20_NARGS] = {
+		(tuneargs->hd << 6) | (tuneargs->tunemode << 4)
+		|  (tuneargs->smoothmetrics << 2) | (tuneargs->injside),
+		msb(tuneargs->freq),
+		lsb(tuneargs->freq),
+	};
+
+	return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ,
+					 args, sizeof(args),
+					 resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_agc_status_a20(struct si476x_core *core,
+					struct si476x_agc_status_report *report)
+{
+	int err;
+	u8 resp[CMD_AGC_STATUS_NRESP_A20];
+
+	if (!report)
+		return -EINVAL;
+
+	err = si476x_core_send_command(core, CMD_AGC_STATUS,
+				       NULL, 0,
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	if (err < 0)
+		return err;
+
+	report->mxhi		= resp[1] & SI476X_AGC_MXHI;
+	report->mxlo		= resp[1] & SI476X_AGC_MXLO;
+	report->lnahi		= resp[1] & SI476X_AGC_LNAHI;
+	report->lnalo		= resp[1] & SI476X_AGC_LNALO;
+	report->fmagc1		= resp[2];
+	report->fmagc2		= resp[3];
+	report->pgagain		= resp[4];
+	report->fmwblang	= resp[5];
+
+	return err;
+}
+
+static int si476x_core_cmd_agc_status_a10(struct si476x_core *core,
+					struct si476x_agc_status_report *report)
+{
+	int err;
+	u8 resp[CMD_AGC_STATUS_NRESP_A10];
+
+	if (!report)
+		return -EINVAL;
+
+	err = si476x_core_send_command(core, CMD_AGC_STATUS,
+				       NULL, 0,
+				       resp, ARRAY_SIZE(resp),
+				       SI476X_DEFAULT_TIMEOUT);
+	if (err < 0)
+		return err;
+
+	report->mxhi	= resp[1] & SI476X_AGC_MXHI;
+	report->mxlo	= resp[1] & SI476X_AGC_MXLO;
+	report->lnahi	= resp[1] & SI476X_AGC_LNAHI;
+	report->lnalo	= resp[1] & SI476X_AGC_LNALO;
+
+	return err;
+}
+
+typedef int (*tune_freq_func_t) (struct si476x_core *core,
+				 struct si476x_tune_freq_args *tuneargs);
+
+static struct {
+	int (*power_up) (struct si476x_core *,
+			 struct si476x_power_up_args *);
+	int (*power_down) (struct si476x_core *,
+			   struct si476x_power_down_args *);
+
+	tune_freq_func_t fm_tune_freq;
+	tune_freq_func_t am_tune_freq;
+
+	int (*fm_rsq_status)(struct si476x_core *,
+			     struct si476x_rsq_status_args *,
+			     struct si476x_rsq_status_report *);
+
+	int (*agc_status)(struct si476x_core *,
+			  struct si476x_agc_status_report *);
+	int (*intb_pin_cfg)(struct si476x_core *core,
+			    enum si476x_intb_config intb,
+			    enum si476x_a1_config a1);
+} si476x_cmds_vtable[] = {
+	[SI476X_REVISION_A10] = {
+		.power_up	= si476x_core_cmd_power_up_a10,
+		.power_down	= si476x_core_cmd_power_down_a10,
+		.fm_tune_freq	= si476x_core_cmd_fm_tune_freq_a10,
+		.am_tune_freq	= si476x_core_cmd_am_tune_freq_a10,
+		.fm_rsq_status	= si476x_core_cmd_fm_rsq_status_a10,
+		.agc_status	= si476x_core_cmd_agc_status_a10,
+		.intb_pin_cfg   = si476x_core_cmd_intb_pin_cfg_a10,
+	},
+	[SI476X_REVISION_A20] = {
+		.power_up	= si476x_core_cmd_power_up_a20,
+		.power_down	= si476x_core_cmd_power_down_a20,
+		.fm_tune_freq	= si476x_core_cmd_fm_tune_freq_a20,
+		.am_tune_freq	= si476x_core_cmd_am_tune_freq_a20,
+		.fm_rsq_status	= si476x_core_cmd_fm_rsq_status_a20,
+		.agc_status	= si476x_core_cmd_agc_status_a20,
+		.intb_pin_cfg   = si476x_core_cmd_intb_pin_cfg_a20,
+	},
+	[SI476X_REVISION_A30] = {
+		.power_up	= si476x_core_cmd_power_up_a20,
+		.power_down	= si476x_core_cmd_power_down_a20,
+		.fm_tune_freq	= si476x_core_cmd_fm_tune_freq_a20,
+		.am_tune_freq	= si476x_core_cmd_am_tune_freq_a20,
+		.fm_rsq_status	= si476x_core_cmd_fm_rsq_status_a30,
+		.agc_status	= si476x_core_cmd_agc_status_a20,
+		.intb_pin_cfg   = si476x_core_cmd_intb_pin_cfg_a20,
+	},
+};
+
+int si476x_core_cmd_power_up(struct si476x_core *core,
+			     struct si476x_power_up_args *args)
+{
+	BUG_ON(core->revision > SI476X_REVISION_A30 ||
+	       core->revision == -1);
+	return si476x_cmds_vtable[core->revision].power_up(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_power_up);
+
+int si476x_core_cmd_power_down(struct si476x_core *core,
+			       struct si476x_power_down_args *args)
+{
+	BUG_ON(core->revision > SI476X_REVISION_A30 ||
+	       core->revision == -1);
+	return si476x_cmds_vtable[core->revision].power_down(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_power_down);
+
+int si476x_core_cmd_fm_tune_freq(struct si476x_core *core,
+				 struct si476x_tune_freq_args *args)
+{
+	BUG_ON(core->revision > SI476X_REVISION_A30 ||
+	       core->revision == -1);
+	return si476x_cmds_vtable[core->revision].fm_tune_freq(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_tune_freq);
+
+int si476x_core_cmd_am_tune_freq(struct si476x_core *core,
+				 struct si476x_tune_freq_args *args)
+{
+	BUG_ON(core->revision > SI476X_REVISION_A30 ||
+	       core->revision == -1);
+	return si476x_cmds_vtable[core->revision].am_tune_freq(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_tune_freq);
+
+int si476x_core_cmd_fm_rsq_status(struct si476x_core *core,
+				  struct si476x_rsq_status_args *args,
+				  struct si476x_rsq_status_report *report)
+
+{
+	BUG_ON(core->revision > SI476X_REVISION_A30 ||
+	       core->revision == -1);
+	return si476x_cmds_vtable[core->revision].fm_rsq_status(core, args,
+								report);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rsq_status);
+
+int si476x_core_cmd_agc_status(struct si476x_core *core,
+				  struct si476x_agc_status_report *report)
+
+{
+	BUG_ON(core->revision > SI476X_REVISION_A30 ||
+	       core->revision == -1);
+	return si476x_cmds_vtable[core->revision].agc_status(core, report);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_agc_status);
+
+int si476x_core_cmd_intb_pin_cfg(struct si476x_core *core,
+			    enum si476x_intb_config intb,
+			    enum si476x_a1_config a1)
+{
+	BUG_ON(core->revision > SI476X_REVISION_A30 ||
+	       core->revision == -1);
+
+	return si476x_cmds_vtable[core->revision].intb_pin_cfg(core, intb, a1);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_intb_pin_cfg);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("API for command exchange for si476x");
diff --git a/drivers/mfd/si476x-i2c.c b/drivers/mfd/si476x-i2c.c
new file mode 100644
index 000000000000..f5bc8e4bd4bf
--- /dev/null
+++ b/drivers/mfd/si476x-i2c.c
@@ -0,0 +1,886 @@
+/*
+ * drivers/mfd/si476x-i2c.c -- Core device driver for si476x MFD
+ * device
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+#include <linux/module.h>
+
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+
+#include <linux/mfd/si476x-core.h>
+
+#define SI476X_MAX_IO_ERRORS		10
+#define SI476X_DRIVER_RDS_FIFO_DEPTH	128
+
+/**
+ * si476x_core_config_pinmux() - pin function configuration function
+ *
+ * @core: Core device structure
+ *
+ * Configure the functions of the pins of the radio chip.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+static int si476x_core_config_pinmux(struct si476x_core *core)
+{
+	int err;
+	dev_dbg(&core->client->dev, "Configuring pinmux\n");
+	err = si476x_core_cmd_dig_audio_pin_cfg(core,
+						core->pinmux.dclk,
+						core->pinmux.dfs,
+						core->pinmux.dout,
+						core->pinmux.xout);
+	if (err < 0) {
+		dev_err(&core->client->dev,
+			"Failed to configure digital audio pins(err = %d)\n",
+			err);
+		return err;
+	}
+
+	err = si476x_core_cmd_zif_pin_cfg(core,
+					  core->pinmux.iqclk,
+					  core->pinmux.iqfs,
+					  core->pinmux.iout,
+					  core->pinmux.qout);
+	if (err < 0) {
+		dev_err(&core->client->dev,
+			"Failed to configure ZIF pins(err = %d)\n",
+			err);
+		return err;
+	}
+
+	err = si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(core,
+						      core->pinmux.icin,
+						      core->pinmux.icip,
+						      core->pinmux.icon,
+						      core->pinmux.icop);
+	if (err < 0) {
+		dev_err(&core->client->dev,
+			"Failed to configure IC-Link/GPO pins(err = %d)\n",
+			err);
+		return err;
+	}
+
+	err = si476x_core_cmd_ana_audio_pin_cfg(core,
+						core->pinmux.lrout);
+	if (err < 0) {
+		dev_err(&core->client->dev,
+			"Failed to configure analog audio pins(err = %d)\n",
+			err);
+		return err;
+	}
+
+	err = si476x_core_cmd_intb_pin_cfg(core,
+					   core->pinmux.intb,
+					   core->pinmux.a1);
+	if (err < 0) {
+		dev_err(&core->client->dev,
+			"Failed to configure interrupt pins(err = %d)\n",
+			err);
+		return err;
+	}
+
+	return 0;
+}
+
+static inline void si476x_core_schedule_polling_work(struct si476x_core *core)
+{
+	schedule_delayed_work(&core->status_monitor,
+			      usecs_to_jiffies(SI476X_STATUS_POLL_US));
+}
+
+/**
+ * si476x_core_start() - early chip startup function
+ * @core: Core device structure
+ * @soft: When set, this flag forces "soft" startup, where "soft"
+ * power down is the one done by sending appropriate command instead
+ * of using reset pin of the tuner
+ *
+ * Perform required startup sequence to correctly power
+ * up the chip and perform initial configuration. It does the
+ * following sequence of actions:
+ *       1. Claims and enables the power supplies VD and VIO1 required
+ *          for I2C interface of the chip operation.
+ *       2. Waits for 100us, pulls the reset line up, enables irq,
+ *          waits for another 100us as it is specified by the
+ *          datasheet.
+ *       3. Sends 'POWER_UP' command to the device with all provided
+ *          information about power-up parameters.
+ *       4. Configures, pin multiplexor, disables digital audio and
+ *          configures interrupt sources.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+int si476x_core_start(struct si476x_core *core, bool soft)
+{
+	struct i2c_client *client = core->client;
+	int err;
+
+	if (!soft) {
+		if (gpio_is_valid(core->gpio_reset))
+			gpio_set_value_cansleep(core->gpio_reset, 1);
+
+		if (client->irq)
+			enable_irq(client->irq);
+
+		udelay(100);
+
+		if (!client->irq) {
+			atomic_set(&core->is_alive, 1);
+			si476x_core_schedule_polling_work(core);
+		}
+	} else {
+		if (client->irq)
+			enable_irq(client->irq);
+		else {
+			atomic_set(&core->is_alive, 1);
+			si476x_core_schedule_polling_work(core);
+		}
+	}
+
+	err = si476x_core_cmd_power_up(core,
+				       &core->power_up_parameters);
+
+	if (err < 0) {
+		dev_err(&core->client->dev,
+			"Power up failure(err = %d)\n",
+			err);
+		goto disable_irq;
+	}
+
+	if (client->irq)
+		atomic_set(&core->is_alive, 1);
+
+	err = si476x_core_config_pinmux(core);
+	if (err < 0) {
+		dev_err(&core->client->dev,
+			"Failed to configure pinmux(err = %d)\n",
+			err);
+		goto disable_irq;
+	}
+
+	if (client->irq) {
+		err = regmap_write(core->regmap,
+				   SI476X_PROP_INT_CTL_ENABLE,
+				   SI476X_RDSIEN |
+				   SI476X_STCIEN |
+				   SI476X_CTSIEN);
+		if (err < 0) {
+			dev_err(&core->client->dev,
+				"Failed to configure interrupt sources"
+				"(err = %d)\n", err);
+			goto disable_irq;
+		}
+	}
+
+	return 0;
+
+disable_irq:
+	if (err == -ENODEV)
+		atomic_set(&core->is_alive, 0);
+
+	if (client->irq)
+		disable_irq(client->irq);
+	else
+		cancel_delayed_work_sync(&core->status_monitor);
+
+	if (gpio_is_valid(core->gpio_reset))
+		gpio_set_value_cansleep(core->gpio_reset, 0);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_start);
+
+/**
+ * si476x_core_stop() - chip power-down function
+ * @core: Core device structure
+ * @soft: When set, function sends a POWER_DOWN command instead of
+ * bringing reset line low
+ *
+ * Power down the chip by performing following actions:
+ * 1. Disable IRQ or stop the polling worker
+ * 2. Send the POWER_DOWN command if the power down is soft or bring
+ *    reset line low if not.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+int si476x_core_stop(struct si476x_core *core, bool soft)
+{
+	int err = 0;
+	atomic_set(&core->is_alive, 0);
+
+	if (soft) {
+		/* TODO: This probably shoud be a configurable option,
+		 * so it is possible to have the chips keep their
+		 * oscillators running
+		 */
+		struct si476x_power_down_args args = {
+			.xosc = false,
+		};
+		err = si476x_core_cmd_power_down(core, &args);
+	}
+
+	/* We couldn't disable those before
+	 * 'si476x_core_cmd_power_down' since we expect to get CTS
+	 * interrupt */
+	if (core->client->irq)
+		disable_irq(core->client->irq);
+	else
+		cancel_delayed_work_sync(&core->status_monitor);
+
+	if (!soft) {
+		if (gpio_is_valid(core->gpio_reset))
+			gpio_set_value_cansleep(core->gpio_reset, 0);
+	}
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_stop);
+
+/**
+ * si476x_core_set_power_state() - set the level at which the power is
+ * supplied for the chip.
+ * @core: Core device structure
+ * @next_state: enum si476x_power_state describing power state to
+ *              switch to.
+ *
+ * Switch on all the required power supplies
+ *
+ * This function returns 0 in case of suvccess and negative error code
+ * otherwise.
+ */
+int si476x_core_set_power_state(struct si476x_core *core,
+				enum si476x_power_state next_state)
+{
+	/*
+	   It is not clear form the datasheet if it is possible to
+	   work with device if not all power domains are operational.
+	   So for now the power-up policy is "power-up all the things!"
+	 */
+	int err = 0;
+
+	if (core->power_state == SI476X_POWER_INCONSISTENT) {
+		dev_err(&core->client->dev,
+			"The device in inconsistent power state\n");
+		return -EINVAL;
+	}
+
+	if (next_state != core->power_state) {
+		switch (next_state) {
+		case SI476X_POWER_UP_FULL:
+			err = regulator_bulk_enable(ARRAY_SIZE(core->supplies),
+						    core->supplies);
+			if (err < 0) {
+				core->power_state = SI476X_POWER_INCONSISTENT;
+				break;
+			}
+			/*
+			 * Startup timing diagram recommends to have a
+			 * 100 us delay between enabling of the power
+			 * supplies and turning the tuner on.
+			 */
+			udelay(100);
+
+			err = si476x_core_start(core, false);
+			if (err < 0)
+				goto disable_regulators;
+
+			core->power_state = next_state;
+			break;
+
+		case SI476X_POWER_DOWN:
+			core->power_state = next_state;
+			err = si476x_core_stop(core, false);
+			if (err < 0)
+				core->power_state = SI476X_POWER_INCONSISTENT;
+disable_regulators:
+			err = regulator_bulk_disable(ARRAY_SIZE(core->supplies),
+						     core->supplies);
+			if (err < 0)
+				core->power_state = SI476X_POWER_INCONSISTENT;
+			break;
+		default:
+			BUG();
+		}
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_set_power_state);
+
+/**
+ * si476x_core_report_drainer_stop() - mark the completion of the RDS
+ * buffer drain porcess by the worker.
+ *
+ * @core: Core device structure
+ */
+static inline void si476x_core_report_drainer_stop(struct si476x_core *core)
+{
+	mutex_lock(&core->rds_drainer_status_lock);
+	core->rds_drainer_is_working = false;
+	mutex_unlock(&core->rds_drainer_status_lock);
+}
+
+/**
+ * si476x_core_start_rds_drainer_once() - start RDS drainer worker if
+ * ther is none working, do nothing otherwise
+ *
+ * @core: Datastructure corresponding to the chip.
+ */
+static inline void si476x_core_start_rds_drainer_once(struct si476x_core *core)
+{
+	mutex_lock(&core->rds_drainer_status_lock);
+	if (!core->rds_drainer_is_working) {
+		core->rds_drainer_is_working = true;
+		schedule_work(&core->rds_fifo_drainer);
+	}
+	mutex_unlock(&core->rds_drainer_status_lock);
+}
+/**
+ * si476x_drain_rds_fifo() - RDS buffer drainer.
+ * @work: struct work_struct being ppassed to the function by the
+ * kernel.
+ *
+ * Drain the contents of the RDS FIFO of
+ */
+static void si476x_core_drain_rds_fifo(struct work_struct *work)
+{
+	int err;
+
+	struct si476x_core *core = container_of(work, struct si476x_core,
+						rds_fifo_drainer);
+
+	struct si476x_rds_status_report report;
+
+	si476x_core_lock(core);
+	err = si476x_core_cmd_fm_rds_status(core, true, false, false, &report);
+	if (!err) {
+		int i = report.rdsfifoused;
+		dev_dbg(&core->client->dev,
+			"%d elements in RDS FIFO. Draining.\n", i);
+		for (; i > 0; --i) {
+			err = si476x_core_cmd_fm_rds_status(core, false, false,
+							    (i == 1), &report);
+			if (err < 0)
+				goto unlock;
+
+			kfifo_in(&core->rds_fifo, report.rds,
+				 sizeof(report.rds));
+			dev_dbg(&core->client->dev, "RDS data:\n %*ph\n",
+				(int)sizeof(report.rds), report.rds);
+		}
+		dev_dbg(&core->client->dev, "Drrrrained!\n");
+		wake_up_interruptible(&core->rds_read_queue);
+	}
+
+unlock:
+	si476x_core_unlock(core);
+	si476x_core_report_drainer_stop(core);
+}
+
+/**
+ * si476x_core_pronounce_dead()
+ *
+ * @core: Core device structure
+ *
+ * Mark the device as being dead and wake up all potentially waiting
+ * threads of execution.
+ *
+ */
+static void si476x_core_pronounce_dead(struct si476x_core *core)
+{
+	dev_info(&core->client->dev, "Core device is dead.\n");
+
+	atomic_set(&core->is_alive, 0);
+
+	/* Wake up al possible waiting processes */
+	wake_up_interruptible(&core->rds_read_queue);
+
+	atomic_set(&core->cts, 1);
+	wake_up(&core->command);
+
+	atomic_set(&core->stc, 1);
+	wake_up(&core->tuning);
+}
+
+/**
+ * si476x_core_i2c_xfer()
+ *
+ * @core: Core device structure
+ * @type: Transfer type
+ * @buf: Transfer buffer for/with data
+ * @count: Transfer buffer size
+ *
+ * Perfrom and I2C transfer(either read or write) and keep a counter
+ * of I/O errors. If the error counter rises above the threshold
+ * pronounce device dead.
+ *
+ * The function returns zero on succes or negative error code on
+ * failure.
+ */
+int si476x_core_i2c_xfer(struct si476x_core *core,
+		    enum si476x_i2c_type type,
+		    char *buf, int count)
+{
+	static int io_errors_count;
+	int err;
+	if (type == SI476X_I2C_SEND)
+		err = i2c_master_send(core->client, buf, count);
+	else
+		err = i2c_master_recv(core->client, buf, count);
+
+	if (err < 0) {
+		if (io_errors_count++ > SI476X_MAX_IO_ERRORS)
+			si476x_core_pronounce_dead(core);
+	} else {
+		io_errors_count = 0;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_i2c_xfer);
+
+/**
+ * si476x_get_status()
+ * @core: Core device structure
+ *
+ * Get the status byte of the core device by berforming one byte I2C
+ * read.
+ *
+ * The function returns a status value or a negative error code on
+ * error.
+ */
+static int si476x_core_get_status(struct si476x_core *core)
+{
+	u8 response;
+	int err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV,
+				  &response, sizeof(response));
+
+	return (err < 0) ? err : response;
+}
+
+/**
+ * si476x_get_and_signal_status() - IRQ dispatcher
+ * @core: Core device structure
+ *
+ * Dispatch the arrived interrupt request based on the value of the
+ * status byte reported by the tuner.
+ *
+ */
+static void si476x_core_get_and_signal_status(struct si476x_core *core)
+{
+	int status = si476x_core_get_status(core);
+	if (status < 0) {
+		dev_err(&core->client->dev, "Failed to get status\n");
+		return;
+	}
+
+	if (status & SI476X_CTS) {
+		/* Unfortunately completions could not be used for
+		 * signalling CTS since this flag cannot be cleared
+		 * in status byte, and therefore once it becomes true
+		 * multiple calls to 'complete' would cause the
+		 * commands following the current one to be completed
+		 * before they actually are */
+		dev_dbg(&core->client->dev, "[interrupt] CTSINT\n");
+		atomic_set(&core->cts, 1);
+		wake_up(&core->command);
+	}
+
+	if (status & SI476X_FM_RDS_INT) {
+		dev_dbg(&core->client->dev, "[interrupt] RDSINT\n");
+		si476x_core_start_rds_drainer_once(core);
+	}
+
+	if (status & SI476X_STC_INT) {
+		dev_dbg(&core->client->dev, "[interrupt] STCINT\n");
+		atomic_set(&core->stc, 1);
+		wake_up(&core->tuning);
+	}
+}
+
+static void si476x_core_poll_loop(struct work_struct *work)
+{
+	struct si476x_core *core = SI476X_WORK_TO_CORE(work);
+
+	si476x_core_get_and_signal_status(core);
+
+	if (atomic_read(&core->is_alive))
+		si476x_core_schedule_polling_work(core);
+}
+
+static irqreturn_t si476x_core_interrupt(int irq, void *dev)
+{
+	struct si476x_core *core = dev;
+
+	si476x_core_get_and_signal_status(core);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * si476x_firmware_version_to_revision()
+ * @core: Core device structure
+ * @major:  Firmware major number
+ * @minor1: Firmware first minor number
+ * @minor2: Firmware second minor number
+ *
+ * Convert a chip's firmware version number into an offset that later
+ * will be used to as offset in "vtable" of tuner functions
+ *
+ * This function returns a positive offset in case of success and a -1
+ * in case of failure.
+ */
+static int si476x_core_fwver_to_revision(struct si476x_core *core,
+					 int func, int major,
+					 int minor1, int minor2)
+{
+	switch (func) {
+	case SI476X_FUNC_FM_RECEIVER:
+		switch (major) {
+		case 5:
+			return SI476X_REVISION_A10;
+		case 8:
+			return SI476X_REVISION_A20;
+		case 10:
+			return SI476X_REVISION_A30;
+		default:
+			goto unknown_revision;
+		}
+	case SI476X_FUNC_AM_RECEIVER:
+		switch (major) {
+		case 5:
+			return SI476X_REVISION_A10;
+		case 7:
+			return SI476X_REVISION_A20;
+		case 9:
+			return SI476X_REVISION_A30;
+		default:
+			goto unknown_revision;
+		}
+	case SI476X_FUNC_WB_RECEIVER:
+		switch (major) {
+		case 3:
+			return SI476X_REVISION_A10;
+		case 5:
+			return SI476X_REVISION_A20;
+		case 7:
+			return SI476X_REVISION_A30;
+		default:
+			goto unknown_revision;
+		}
+	case SI476X_FUNC_BOOTLOADER:
+	default:		/* FALLTHROUG */
+		BUG();
+		return -1;
+	}
+
+unknown_revision:
+	dev_err(&core->client->dev,
+		"Unsupported version of the firmware: %d.%d.%d, "
+		"reverting to A10 comptible functions\n",
+		major, minor1, minor2);
+
+	return SI476X_REVISION_A10;
+}
+
+/**
+ * si476x_get_revision_info()
+ * @core: Core device structure
+ *
+ * Get the firmware version number of the device. It is done in
+ * following three steps:
+ *    1. Power-up the device
+ *    2. Send the 'FUNC_INFO' command
+ *    3. Powering the device down.
+ *
+ * The function return zero on success and a negative error code on
+ * failure.
+ */
+static int si476x_core_get_revision_info(struct si476x_core *core)
+{
+	int rval;
+	struct si476x_func_info info;
+
+	si476x_core_lock(core);
+	rval = si476x_core_set_power_state(core, SI476X_POWER_UP_FULL);
+	if (rval < 0)
+		goto exit;
+
+	rval = si476x_core_cmd_func_info(core, &info);
+	if (rval < 0)
+		goto power_down;
+
+	core->revision = si476x_core_fwver_to_revision(core, info.func,
+						       info.firmware.major,
+						       info.firmware.minor[0],
+						       info.firmware.minor[1]);
+power_down:
+	si476x_core_set_power_state(core, SI476X_POWER_DOWN);
+exit:
+	si476x_core_unlock(core);
+
+	return rval;
+}
+
+bool si476x_core_has_am(struct si476x_core *core)
+{
+	return core->chip_id == SI476X_CHIP_SI4761 ||
+		core->chip_id == SI476X_CHIP_SI4764;
+}
+EXPORT_SYMBOL_GPL(si476x_core_has_am);
+
+bool si476x_core_has_diversity(struct si476x_core *core)
+{
+	return core->chip_id == SI476X_CHIP_SI4764;
+}
+EXPORT_SYMBOL_GPL(si476x_core_has_diversity);
+
+bool si476x_core_is_a_secondary_tuner(struct si476x_core *core)
+{
+	return si476x_core_has_diversity(core) &&
+		(core->diversity_mode == SI476X_PHDIV_SECONDARY_ANTENNA ||
+		 core->diversity_mode == SI476X_PHDIV_SECONDARY_COMBINING);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_a_secondary_tuner);
+
+bool si476x_core_is_a_primary_tuner(struct si476x_core *core)
+{
+	return si476x_core_has_diversity(core) &&
+		(core->diversity_mode == SI476X_PHDIV_PRIMARY_ANTENNA ||
+		 core->diversity_mode == SI476X_PHDIV_PRIMARY_COMBINING);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_a_primary_tuner);
+
+bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core)
+{
+	return si476x_core_has_am(core) &&
+		(core->power_up_parameters.func == SI476X_FUNC_AM_RECEIVER);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_in_am_receiver_mode);
+
+bool si476x_core_is_powered_up(struct si476x_core *core)
+{
+	return core->power_state == SI476X_POWER_UP_FULL;
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_powered_up);
+
+static int si476x_core_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	int rval;
+	struct si476x_core          *core;
+	struct si476x_platform_data *pdata;
+	struct mfd_cell *cell;
+	int              cell_num;
+
+	core = devm_kzalloc(&client->dev, sizeof(*core), GFP_KERNEL);
+	if (!core) {
+		dev_err(&client->dev,
+			"failed to allocate 'struct si476x_core'\n");
+		return -ENOMEM;
+	}
+	core->client = client;
+
+	core->regmap = devm_regmap_init_si476x(core);
+	if (IS_ERR(core->regmap)) {
+		rval = PTR_ERR(core->regmap);
+		dev_err(&client->dev,
+			"Failed to allocate register map: %d\n",
+			rval);
+		return rval;
+	}
+
+	i2c_set_clientdata(client, core);
+
+	atomic_set(&core->is_alive, 0);
+	core->power_state = SI476X_POWER_DOWN;
+
+	pdata = client->dev.platform_data;
+	if (pdata) {
+		memcpy(&core->power_up_parameters,
+		       &pdata->power_up_parameters,
+		       sizeof(core->power_up_parameters));
+
+		core->gpio_reset = -1;
+		if (gpio_is_valid(pdata->gpio_reset)) {
+			rval = gpio_request(pdata->gpio_reset, "si476x reset");
+			if (rval) {
+				dev_err(&client->dev,
+					"Failed to request gpio: %d\n", rval);
+				return rval;
+			}
+			core->gpio_reset = pdata->gpio_reset;
+			gpio_direction_output(core->gpio_reset, 0);
+		}
+
+		core->diversity_mode = pdata->diversity_mode;
+		memcpy(&core->pinmux, &pdata->pinmux,
+		       sizeof(struct si476x_pinmux));
+	} else {
+		dev_err(&client->dev, "No platform data provided\n");
+		return -EINVAL;
+	}
+
+	core->supplies[0].supply = "vd";
+	core->supplies[1].supply = "va";
+	core->supplies[2].supply = "vio1";
+	core->supplies[3].supply = "vio2";
+
+	rval = devm_regulator_bulk_get(&client->dev,
+				       ARRAY_SIZE(core->supplies),
+				       core->supplies);
+	if (rval) {
+		dev_err(&client->dev, "Failet to gett all of the regulators\n");
+		goto free_gpio;
+	}
+
+	mutex_init(&core->cmd_lock);
+	init_waitqueue_head(&core->command);
+	init_waitqueue_head(&core->tuning);
+
+	rval = kfifo_alloc(&core->rds_fifo,
+			   SI476X_DRIVER_RDS_FIFO_DEPTH *
+			   sizeof(struct v4l2_rds_data),
+			   GFP_KERNEL);
+	if (rval) {
+		dev_err(&client->dev, "Could not alloate the FIFO\n");
+		goto free_gpio;
+	}
+	mutex_init(&core->rds_drainer_status_lock);
+	init_waitqueue_head(&core->rds_read_queue);
+	INIT_WORK(&core->rds_fifo_drainer, si476x_core_drain_rds_fifo);
+
+	if (client->irq) {
+		rval = devm_request_threaded_irq(&client->dev,
+						 client->irq, NULL,
+						 si476x_core_interrupt,
+						 IRQF_TRIGGER_FALLING,
+						 client->name, core);
+		if (rval < 0) {
+			dev_err(&client->dev, "Could not request IRQ %d\n",
+				client->irq);
+			goto free_kfifo;
+		}
+		disable_irq(client->irq);
+		dev_dbg(&client->dev, "IRQ requested.\n");
+
+		core->rds_fifo_depth = 20;
+	} else {
+		INIT_DELAYED_WORK(&core->status_monitor,
+				  si476x_core_poll_loop);
+		dev_info(&client->dev,
+			 "No IRQ number specified, will use polling\n");
+
+		core->rds_fifo_depth = 5;
+	}
+
+	core->chip_id = id->driver_data;
+
+	rval = si476x_core_get_revision_info(core);
+	if (rval < 0) {
+		rval = -ENODEV;
+		goto free_kfifo;
+	}
+
+	cell_num = 0;
+
+	cell = &core->cells[SI476X_RADIO_CELL];
+	cell->name = "si476x-radio";
+	cell_num++;
+
+#ifdef CONFIG_SND_SOC_SI476X
+	if ((core->chip_id == SI476X_CHIP_SI4761 ||
+	     core->chip_id == SI476X_CHIP_SI4764)	&&
+	    core->pinmux.dclk == SI476X_DCLK_DAUDIO     &&
+	    core->pinmux.dfs  == SI476X_DFS_DAUDIO      &&
+	    core->pinmux.dout == SI476X_DOUT_I2S_OUTPUT &&
+	    core->pinmux.xout == SI476X_XOUT_TRISTATE) {
+		cell = &core->cells[SI476X_CODEC_CELL];
+		cell->name          = "si476x-codec";
+		cell_num++;
+	}
+#endif
+	rval = mfd_add_devices(&client->dev,
+			       (client->adapter->nr << 8) + client->addr,
+			       core->cells, cell_num,
+			       NULL, 0, NULL);
+	if (!rval)
+		return 0;
+
+free_kfifo:
+	kfifo_free(&core->rds_fifo);
+
+free_gpio:
+	if (gpio_is_valid(core->gpio_reset))
+		gpio_free(core->gpio_reset);
+
+	return rval;
+}
+
+static int si476x_core_remove(struct i2c_client *client)
+{
+	struct si476x_core *core = i2c_get_clientdata(client);
+
+	si476x_core_pronounce_dead(core);
+	mfd_remove_devices(&client->dev);
+
+	if (client->irq)
+		disable_irq(client->irq);
+	else
+		cancel_delayed_work_sync(&core->status_monitor);
+
+	kfifo_free(&core->rds_fifo);
+
+	if (gpio_is_valid(core->gpio_reset))
+		gpio_free(core->gpio_reset);
+
+	return 0;
+}
+
+
+static const struct i2c_device_id si476x_id[] = {
+	{ "si4761", SI476X_CHIP_SI4761 },
+	{ "si4764", SI476X_CHIP_SI4764 },
+	{ "si4768", SI476X_CHIP_SI4768 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, si476x_id);
+
+static struct i2c_driver si476x_core_driver = {
+	.driver		= {
+		.name	= "si476x-core",
+		.owner  = THIS_MODULE,
+	},
+	.probe		= si476x_core_probe,
+	.remove         = si476x_core_remove,
+	.id_table       = si476x_id,
+};
+module_i2c_driver(si476x_core_driver);
+
+
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("Si4761/64/68 AM/FM MFD core device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/si476x-prop.c b/drivers/mfd/si476x-prop.c
new file mode 100644
index 000000000000..cfeffa6e15d9
--- /dev/null
+++ b/drivers/mfd/si476x-prop.c
@@ -0,0 +1,241 @@
+/*
+ * drivers/mfd/si476x-prop.c -- Subroutines to access
+ * properties of si476x chips
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#include <linux/module.h>
+
+#include <linux/mfd/si476x-core.h>
+
+struct si476x_property_range {
+	u16 low, high;
+};
+
+static bool si476x_core_element_is_in_array(u16 element,
+					    const u16 array[],
+					    size_t size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (element == array[i])
+			return true;
+
+	return false;
+}
+
+static bool si476x_core_element_is_in_range(u16 element,
+					    const struct si476x_property_range range[],
+					    size_t size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (element <= range[i].high && element >= range[i].low)
+			return true;
+
+	return false;
+}
+
+static bool si476x_core_is_valid_property_a10(struct si476x_core *core,
+					      u16 property)
+{
+	static const u16 valid_properties[] = {
+		0x0000,
+		0x0500, 0x0501,
+		0x0600,
+		0x0709, 0x070C, 0x070D, 0x70E, 0x710,
+		0x0718,
+		0x1207, 0x1208,
+		0x2007,
+		0x2300,
+	};
+
+	static const struct si476x_property_range valid_ranges[] = {
+		{ 0x0200, 0x0203 },
+		{ 0x0300, 0x0303 },
+		{ 0x0400, 0x0404 },
+		{ 0x0700, 0x0707 },
+		{ 0x1100, 0x1102 },
+		{ 0x1200, 0x1204 },
+		{ 0x1300, 0x1306 },
+		{ 0x2000, 0x2005 },
+		{ 0x2100, 0x2104 },
+		{ 0x2106, 0x2106 },
+		{ 0x2200, 0x220E },
+		{ 0x3100, 0x3104 },
+		{ 0x3207, 0x320F },
+		{ 0x3300, 0x3304 },
+		{ 0x3500, 0x3517 },
+		{ 0x3600, 0x3617 },
+		{ 0x3700, 0x3717 },
+		{ 0x4000, 0x4003 },
+	};
+
+	return	si476x_core_element_is_in_range(property, valid_ranges,
+						ARRAY_SIZE(valid_ranges)) ||
+		si476x_core_element_is_in_array(property, valid_properties,
+						ARRAY_SIZE(valid_properties));
+}
+
+static bool si476x_core_is_valid_property_a20(struct si476x_core *core,
+					      u16 property)
+{
+	static const u16 valid_properties[] = {
+		0x071B,
+		0x1006,
+		0x2210,
+		0x3401,
+	};
+
+	static const struct si476x_property_range valid_ranges[] = {
+		{ 0x2215, 0x2219 },
+	};
+
+	return	si476x_core_is_valid_property_a10(core, property) ||
+		si476x_core_element_is_in_range(property, valid_ranges,
+						ARRAY_SIZE(valid_ranges))  ||
+		si476x_core_element_is_in_array(property, valid_properties,
+						ARRAY_SIZE(valid_properties));
+}
+
+static bool si476x_core_is_valid_property_a30(struct si476x_core *core,
+					      u16 property)
+{
+	static const u16 valid_properties[] = {
+		0x071C, 0x071D,
+		0x1007, 0x1008,
+		0x220F, 0x2214,
+		0x2301,
+		0x3105, 0x3106,
+		0x3402,
+	};
+
+	static const struct si476x_property_range valid_ranges[] = {
+		{ 0x0405, 0x0411 },
+		{ 0x2008, 0x200B },
+		{ 0x2220, 0x2223 },
+		{ 0x3100, 0x3106 },
+	};
+
+	return	si476x_core_is_valid_property_a20(core, property) ||
+		si476x_core_element_is_in_range(property, valid_ranges,
+						ARRAY_SIZE(valid_ranges)) ||
+		si476x_core_element_is_in_array(property, valid_properties,
+						ARRAY_SIZE(valid_properties));
+}
+
+typedef bool (*valid_property_pred_t) (struct si476x_core *, u16);
+
+static bool si476x_core_is_valid_property(struct si476x_core *core,
+					  u16 property)
+{
+	static const valid_property_pred_t is_valid_property[] = {
+		[SI476X_REVISION_A10] = si476x_core_is_valid_property_a10,
+		[SI476X_REVISION_A20] = si476x_core_is_valid_property_a20,
+		[SI476X_REVISION_A30] = si476x_core_is_valid_property_a30,
+	};
+
+	BUG_ON(core->revision > SI476X_REVISION_A30 ||
+	       core->revision == -1);
+	return is_valid_property[core->revision](core, property);
+}
+
+
+static bool si476x_core_is_readonly_property(struct si476x_core *core,
+					     u16 property)
+{
+	BUG_ON(core->revision > SI476X_REVISION_A30 ||
+	       core->revision == -1);
+
+	switch (core->revision) {
+	case SI476X_REVISION_A10:
+		return (property == 0x3200);
+	case SI476X_REVISION_A20:
+		return (property == 0x1006 ||
+			property == 0x2210 ||
+			property == 0x3200);
+	case SI476X_REVISION_A30:
+		return false;
+	}
+
+	return false;
+}
+
+static bool si476x_core_regmap_readable_register(struct device *dev,
+						 unsigned int reg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct si476x_core *core = i2c_get_clientdata(client);
+
+	return si476x_core_is_valid_property(core, (u16) reg);
+
+}
+
+static bool si476x_core_regmap_writable_register(struct device *dev,
+						 unsigned int reg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct si476x_core *core = i2c_get_clientdata(client);
+
+	return si476x_core_is_valid_property(core, (u16) reg) &&
+		!si476x_core_is_readonly_property(core, (u16) reg);
+}
+
+
+static int si476x_core_regmap_write(void *context, unsigned int reg,
+				    unsigned int val)
+{
+	return si476x_core_cmd_set_property(context, reg, val);
+}
+
+static int si476x_core_regmap_read(void *context, unsigned int reg,
+				   unsigned *val)
+{
+	struct si476x_core *core = context;
+	int err;
+
+	err = si476x_core_cmd_get_property(core, reg);
+	if (err < 0)
+		return err;
+
+	*val = err;
+
+	return 0;
+}
+
+
+static const struct regmap_config si476x_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 16,
+
+	.max_register = 0x4003,
+
+	.writeable_reg = si476x_core_regmap_writable_register,
+	.readable_reg = si476x_core_regmap_readable_register,
+
+	.reg_read = si476x_core_regmap_read,
+	.reg_write = si476x_core_regmap_write,
+
+	.cache_type = REGCACHE_RBTREE,
+};
+
+struct regmap *devm_regmap_init_si476x(struct si476x_core *core)
+{
+	return devm_regmap_init(&core->client->dev, NULL,
+				core, &si476x_regmap_config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_si476x);
diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c
index 9bd33169a111..d70a343078fd 100644
--- a/drivers/mfd/sta2x11-mfd.c
+++ b/drivers/mfd/sta2x11-mfd.c
@@ -98,17 +98,6 @@ static int sta2x11_mfd_add(struct pci_dev *pdev, gfp_t flags)
 	return 0;
 }
 
-static int mfd_remove(struct pci_dev *pdev)
-{
-	struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
-
-	if (!mfd)
-		return -ENODEV;
-	list_del(&mfd->list);
-	kfree(mfd);
-	return 0;
-}
-
 /* This function is exported and is not expected to fail */
 u32 __sta2x11_mfd_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val,
 		       enum sta2x11_mfd_plat_dev index)
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index fd5fcb630685..0da02e11d58e 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -75,6 +75,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
 	{ "stmpe801", STMPE801 },
 	{ "stmpe811", STMPE811 },
 	{ "stmpe1601", STMPE1601 },
+	{ "stmpe1801", STMPE1801 },
 	{ "stmpe2401", STMPE2401 },
 	{ "stmpe2403", STMPE2403 },
 	{ }
diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c
index 973659f8abd9..a81badbaa917 100644
--- a/drivers/mfd/stmpe-spi.c
+++ b/drivers/mfd/stmpe-spi.c
@@ -103,7 +103,7 @@ stmpe_spi_probe(struct spi_device *spi)
 
 static int stmpe_spi_remove(struct spi_device *spi)
 {
-	struct stmpe *stmpe = dev_get_drvdata(&spi->dev);
+	struct stmpe *stmpe = spi_get_drvdata(spi);
 
 	return stmpe_remove(stmpe);
 }
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 4b11202061be..bbccd514d3ec 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/mfd/core.h>
+#include <linux/delay.h>
 #include "stmpe.h"
 
 static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
@@ -643,6 +644,88 @@ static struct stmpe_variant_info stmpe1601 = {
 };
 
 /*
+ * STMPE1801
+ */
+static const u8 stmpe1801_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE1801_REG_CHIP_ID,
+	[STMPE_IDX_ICR_LSB]	= STMPE1801_REG_INT_CTRL_LOW,
+	[STMPE_IDX_IER_LSB]	= STMPE1801_REG_INT_EN_MASK_LOW,
+	[STMPE_IDX_ISR_LSB]	= STMPE1801_REG_INT_STA_LOW,
+	[STMPE_IDX_GPMR_LSB]	= STMPE1801_REG_GPIO_MP_LOW,
+	[STMPE_IDX_GPSR_LSB]	= STMPE1801_REG_GPIO_SET_LOW,
+	[STMPE_IDX_GPCR_LSB]	= STMPE1801_REG_GPIO_CLR_LOW,
+	[STMPE_IDX_GPDR_LSB]	= STMPE1801_REG_GPIO_SET_DIR_LOW,
+	[STMPE_IDX_GPRER_LSB]	= STMPE1801_REG_GPIO_RE_LOW,
+	[STMPE_IDX_GPFER_LSB]	= STMPE1801_REG_GPIO_FE_LOW,
+	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
+	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1801_REG_INT_STA_GPIO_LOW,
+};
+
+static struct stmpe_variant_block stmpe1801_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= STMPE1801_IRQ_GPIOC,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+	{
+		.cell	= &stmpe_keypad_cell,
+		.irq	= STMPE1801_IRQ_KEYPAD,
+		.block	= STMPE_BLOCK_KEYPAD,
+	},
+};
+
+static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
+			    bool enable)
+{
+	unsigned int mask = 0;
+	if (blocks & STMPE_BLOCK_GPIO)
+		mask |= STMPE1801_MSK_INT_EN_GPIO;
+
+	if (blocks & STMPE_BLOCK_KEYPAD)
+		mask |= STMPE1801_MSK_INT_EN_KPC;
+
+	return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
+				enable ? mask : 0);
+}
+
+static int stmpe1801_reset(struct stmpe *stmpe)
+{
+	unsigned long timeout;
+	int ret = 0;
+
+	ret = __stmpe_set_bits(stmpe, STMPE1801_REG_SYS_CTRL,
+		STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
+	if (ret < 0)
+		return ret;
+
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (time_before(jiffies, timeout)) {
+		ret = __stmpe_reg_read(stmpe, STMPE1801_REG_SYS_CTRL);
+		if (ret < 0)
+			return ret;
+		if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
+			return 0;
+		usleep_range(100, 200);
+	};
+	return -EIO;
+}
+
+static struct stmpe_variant_info stmpe1801 = {
+	.name		= "stmpe1801",
+	.id_val		= STMPE1801_ID,
+	.id_mask	= 0xfff0,
+	.num_gpios	= 18,
+	.af_bits	= 0,
+	.regs		= stmpe1801_regs,
+	.blocks		= stmpe1801_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe1801_blocks),
+	.num_irqs	= STMPE1801_NR_INTERNAL_IRQS,
+	.enable		= stmpe1801_enable,
+	/* stmpe1801 do not have any gpio alternate function */
+	.get_altfunc	= NULL,
+};
+
+/*
  * STMPE24XX
  */
 
@@ -740,6 +823,7 @@ static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
 	[STMPE801]	= &stmpe801,
 	[STMPE811]	= &stmpe811,
 	[STMPE1601]	= &stmpe1601,
+	[STMPE1801]	= &stmpe1801,
 	[STMPE2401]	= &stmpe2401,
 	[STMPE2403]	= &stmpe2403,
 };
@@ -759,7 +843,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 	struct stmpe *stmpe = data;
 	struct stmpe_variant_info *variant = stmpe->variant;
 	int num = DIV_ROUND_UP(variant->num_irqs, 8);
-	u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+	u8 israddr;
 	u8 isr[num];
 	int ret;
 	int i;
@@ -771,6 +855,11 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 		return IRQ_HANDLED;
 	}
 
+	if (variant->id_val == STMPE1801_ID)
+		israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
+	else
+		israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+
 	ret = stmpe_block_read(stmpe, israddr, num, isr);
 	if (ret < 0)
 		return IRQ_NONE;
@@ -938,6 +1027,12 @@ static int stmpe_chip_init(struct stmpe *stmpe)
 	if (ret)
 		return ret;
 
+	if (id == STMPE1801_ID)	{
+		ret =  stmpe1801_reset(stmpe);
+		if (ret < 0)
+			return ret;
+	}
+
 	if (stmpe->irq >= 0) {
 		if (id == STMPE801_ID)
 			icr = STMPE801_REG_SYS_CTRL_INT_EN;
@@ -1015,7 +1110,10 @@ void stmpe_of_probe(struct stmpe_platform_data *pdata, struct device_node *np)
 {
 	struct device_node *child;
 
-	pdata->id = -1;
+	pdata->id = of_alias_get_id(np, "stmpe-i2c");
+	if (pdata->id < 0)
+		pdata->id = -1;
+
 	pdata->irq_trigger = IRQF_TRIGGER_NONE;
 
 	of_property_read_u32(np, "st,autosleep-timeout",
@@ -1057,6 +1155,9 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum)
 			return -ENOMEM;
 
 		stmpe_of_probe(pdata, np);
+
+		if (of_find_property(np, "interrupts", NULL) == NULL)
+			ci->irq = -1;
 	}
 
 	stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 7b8e13f5b764..ff2b09ba8797 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -199,6 +199,55 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STPME1601_AUTOSLEEP_ENABLE		(1 << 3)
 
 /*
+ * STMPE1801
+ */
+#define STMPE1801_ID			0xc110
+#define STMPE1801_NR_INTERNAL_IRQS	5
+#define STMPE1801_IRQ_KEYPAD_COMBI	4
+#define STMPE1801_IRQ_GPIOC		3
+#define STMPE1801_IRQ_KEYPAD_OVER	2
+#define STMPE1801_IRQ_KEYPAD		1
+#define STMPE1801_IRQ_WAKEUP		0
+
+#define STMPE1801_REG_CHIP_ID			0x00
+#define STMPE1801_REG_SYS_CTRL			0x02
+#define STMPE1801_REG_INT_CTRL_LOW		0x04
+#define STMPE1801_REG_INT_EN_MASK_LOW		0x06
+#define STMPE1801_REG_INT_STA_LOW		0x08
+#define STMPE1801_REG_INT_EN_GPIO_MASK_LOW	0x0A
+#define STMPE1801_REG_INT_EN_GPIO_MASK_MID	0x0B
+#define STMPE1801_REG_INT_EN_GPIO_MASK_HIGH	0x0C
+#define STMPE1801_REG_INT_STA_GPIO_LOW		0x0D
+#define STMPE1801_REG_INT_STA_GPIO_MID		0x0E
+#define STMPE1801_REG_INT_STA_GPIO_HIGH		0x0F
+#define STMPE1801_REG_GPIO_SET_LOW		0x10
+#define STMPE1801_REG_GPIO_SET_MID		0x11
+#define STMPE1801_REG_GPIO_SET_HIGH		0x12
+#define STMPE1801_REG_GPIO_CLR_LOW		0x13
+#define STMPE1801_REG_GPIO_CLR_MID		0x14
+#define STMPE1801_REG_GPIO_CLR_HIGH		0x15
+#define STMPE1801_REG_GPIO_MP_LOW		0x16
+#define STMPE1801_REG_GPIO_MP_MID		0x17
+#define STMPE1801_REG_GPIO_MP_HIGH		0x18
+#define STMPE1801_REG_GPIO_SET_DIR_LOW		0x19
+#define STMPE1801_REG_GPIO_SET_DIR_MID		0x1A
+#define STMPE1801_REG_GPIO_SET_DIR_HIGH		0x1B
+#define STMPE1801_REG_GPIO_RE_LOW		0x1C
+#define STMPE1801_REG_GPIO_RE_MID		0x1D
+#define STMPE1801_REG_GPIO_RE_HIGH		0x1E
+#define STMPE1801_REG_GPIO_FE_LOW		0x1F
+#define STMPE1801_REG_GPIO_FE_MID		0x20
+#define STMPE1801_REG_GPIO_FE_HIGH		0x21
+#define STMPE1801_REG_GPIO_PULL_UP_LOW		0x22
+#define STMPE1801_REG_GPIO_PULL_UP_MID		0x23
+#define STMPE1801_REG_GPIO_PULL_UP_HIGH		0x24
+
+#define STMPE1801_MSK_SYS_CTRL_RESET		(1 << 7)
+
+#define STMPE1801_MSK_INT_EN_KPC		(1 << 1)
+#define STMPE1801_MSK_INT_EN_GPIO		(1 << 3)
+
+/*
  * STMPE24xx
  */
 
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 61aea6381cdf..962a6e17a01a 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -25,17 +25,15 @@
 static struct platform_driver syscon_driver;
 
 struct syscon {
-	struct device *dev;
 	void __iomem *base;
 	struct regmap *regmap;
 };
 
-static int syscon_match(struct device *dev, void *data)
+static int syscon_match_node(struct device *dev, void *data)
 {
-	struct syscon *syscon = dev_get_drvdata(dev);
 	struct device_node *dn = data;
 
-	return (syscon->dev->of_node == dn) ? 1 : 0;
+	return (dev->of_node == dn) ? 1 : 0;
 }
 
 struct regmap *syscon_node_to_regmap(struct device_node *np)
@@ -44,7 +42,7 @@ struct regmap *syscon_node_to_regmap(struct device_node *np)
 	struct device *dev;
 
 	dev = driver_find_device(&syscon_driver.driver, NULL, np,
-				 syscon_match);
+				 syscon_match_node);
 	if (!dev)
 		return ERR_PTR(-EPROBE_DEFER);
 
@@ -70,6 +68,34 @@ struct regmap *syscon_regmap_lookup_by_compatible(const char *s)
 }
 EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_compatible);
 
+static int syscon_match_pdevname(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+
+	if (id)
+		if (!strcmp(id->name, (const char *)data))
+			return 1;
+
+	return !strcmp(dev_name(dev), (const char *)data);
+}
+
+struct regmap *syscon_regmap_lookup_by_pdevname(const char *s)
+{
+	struct device *dev;
+	struct syscon *syscon;
+
+	dev = driver_find_device(&syscon_driver.driver, NULL, (void *)s,
+				 syscon_match_pdevname);
+	if (!dev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	syscon = dev_get_drvdata(dev);
+
+	return syscon->regmap;
+}
+EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_pdevname);
+
 struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
 					const char *property)
 {
@@ -101,28 +127,22 @@ static struct regmap_config syscon_regmap_config = {
 static int syscon_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
 	struct syscon *syscon;
-	struct resource res;
-	int ret;
-
-	if (!np)
-		return -ENOENT;
+	struct resource *res;
 
-	syscon = devm_kzalloc(dev, sizeof(struct syscon),
-			    GFP_KERNEL);
+	syscon = devm_kzalloc(dev, sizeof(*syscon), GFP_KERNEL);
 	if (!syscon)
 		return -ENOMEM;
 
-	syscon->base = of_iomap(np, 0);
-	if (!syscon->base)
-		return -EADDRNOTAVAIL;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
 
-	ret = of_address_to_resource(np, 0, &res);
-	if (ret)
-		return ret;
+	syscon->base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!syscon->base)
+		return -ENOMEM;
 
-	syscon_regmap_config.max_register = res.end - res.start - 3;
+	syscon_regmap_config.max_register = res->end - res->start - 3;
 	syscon->regmap = devm_regmap_init_mmio(dev, syscon->base,
 					&syscon_regmap_config);
 	if (IS_ERR(syscon->regmap)) {
@@ -130,25 +150,17 @@ static int syscon_probe(struct platform_device *pdev)
 		return PTR_ERR(syscon->regmap);
 	}
 
-	syscon->dev = dev;
 	platform_set_drvdata(pdev, syscon);
 
-	dev_info(dev, "syscon regmap start 0x%x end 0x%x registered\n",
-		res.start, res.end);
+	dev_info(dev, "regmap %pR registered\n", res);
 
 	return 0;
 }
 
-static int syscon_remove(struct platform_device *pdev)
-{
-	struct syscon *syscon;
-
-	syscon = platform_get_drvdata(pdev);
-	iounmap(syscon->base);
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
+static const struct platform_device_id syscon_ids[] = {
+	{ "syscon", },
+	{ }
+};
 
 static struct platform_driver syscon_driver = {
 	.driver = {
@@ -157,7 +169,7 @@ static struct platform_driver syscon_driver = {
 		.of_match_table = of_syscon_match,
 	},
 	.probe		= syscon_probe,
-	.remove		= syscon_remove,
+	.id_table	= syscon_ids,
 };
 
 static int __init syscon_init(void)
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index ecc092c7f745..4cb92bb2aea2 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -350,7 +350,8 @@ static int tc3589x_probe(struct i2c_client *i2c,
 				     | I2C_FUNC_SMBUS_I2C_BLOCK))
 		return -EIO;
 
-	tc3589x = kzalloc(sizeof(struct tc3589x), GFP_KERNEL);
+	tc3589x = devm_kzalloc(&i2c->dev, sizeof(struct tc3589x),
+				GFP_KERNEL);
 	if (!tc3589x)
 		return -ENOMEM;
 
@@ -366,33 +367,27 @@ static int tc3589x_probe(struct i2c_client *i2c,
 
 	ret = tc3589x_chip_init(tc3589x);
 	if (ret)
-		goto out_free;
+		return ret;
 
 	ret = tc3589x_irq_init(tc3589x, np);
 	if (ret)
-		goto out_free;
+		return ret;
 
 	ret = request_threaded_irq(tc3589x->i2c->irq, NULL, tc3589x_irq,
 				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				   "tc3589x", tc3589x);
 	if (ret) {
 		dev_err(tc3589x->dev, "failed to request IRQ: %d\n", ret);
-		goto out_free;
+		return ret;
 	}
 
 	ret = tc3589x_device_init(tc3589x);
 	if (ret) {
 		dev_err(tc3589x->dev, "failed to add child devices\n");
-		goto out_freeirq;
+		return ret;
 	}
 
 	return 0;
-
-out_freeirq:
-	free_irq(tc3589x->i2c->irq, tc3589x);
-out_free:
-	kfree(tc3589x);
-	return ret;
 }
 
 static int tc3589x_remove(struct i2c_client *client)
@@ -401,10 +396,6 @@ static int tc3589x_remove(struct i2c_client *client)
 
 	mfd_remove_devices(tc3589x->dev);
 
-	free_irq(tc3589x->i2c->irq, tc3589x);
-
-	kfree(tc3589x);
-
 	return 0;
 }
 
diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
index 98edb5be85c6..fbd6ee67b5a5 100644
--- a/drivers/mfd/tps65090.c
+++ b/drivers/mfd/tps65090.c
@@ -56,12 +56,23 @@
 #define TPS65090_INT2_MASK_OVERLOAD_FET6		6
 #define TPS65090_INT2_MASK_OVERLOAD_FET7		7
 
+static struct resource charger_resources[] = {
+	{
+		.start  = TPS65090_IRQ_VAC_STATUS_CHANGE,
+		.end    = TPS65090_IRQ_VAC_STATUS_CHANGE,
+		.flags  = IORESOURCE_IRQ,
+	}
+};
+
 static struct mfd_cell tps65090s[] = {
 	{
 		.name = "tps65090-pmic",
 	},
 	{
 		.name = "tps65090-charger",
+		.num_resources = ARRAY_SIZE(charger_resources),
+		.resources = &charger_resources[0],
+		.of_compatible = "ti,tps65090-charger",
 	},
 };
 
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 942b666a2a07..42bd3ea5df3c 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -211,12 +211,14 @@ static int twl4030battery_current(int raw_volt)
  * @reg_base - Base address of the first channel
  * @Channels - 16 bit bitmap. If the bit is set, channel value is read
  * @buf - The channel values are stored here. if read fails error
+ * @raw - Return raw values without conversion
  * value is stored
  * Returns the number of successfully read channels.
  */
 static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
 				      u8 reg_base, unsigned
-						long channels, int *buf)
+				      long channels, int *buf,
+				      bool raw)
 {
 	int count = 0, count_req = 0, i;
 	u8 reg;
@@ -230,6 +232,10 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
 			count_req++;
 			continue;
 		}
+		if (raw) {
+			count++;
+			continue;
+		}
 		switch (i) {
 		case 10:
 			buf[i] = twl4030battery_current(buf[i]);
@@ -371,7 +377,7 @@ static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc)
 		method = &twl4030_conversion_methods[r->method];
 		/* Read results */
 		len = twl4030_madc_read_channels(madc, method->rbase,
-						 r->channels, r->rbuf);
+						 r->channels, r->rbuf, r->raw);
 		/* Return results to caller */
 		if (r->func_cb != NULL) {
 			r->func_cb(len, r->channels, r->rbuf);
@@ -397,7 +403,7 @@ err_i2c:
 		method = &twl4030_conversion_methods[r->method];
 		/* Read results */
 		len = twl4030_madc_read_channels(madc, method->rbase,
-						 r->channels, r->rbuf);
+						 r->channels, r->rbuf, r->raw);
 		/* Return results to caller */
 		if (r->func_cb != NULL) {
 			r->func_cb(len, r->channels, r->rbuf);
@@ -585,7 +591,7 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
 		goto out;
 	}
 	ret = twl4030_madc_read_channels(twl4030_madc, method->rbase,
-					 req->channels, req->rbuf);
+					 req->channels, req->rbuf, req->raw);
 	twl4030_madc->requests[req->method].active = 0;
 
 out:
diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index f361bf38a0aa..492ee2cd3400 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -554,7 +554,7 @@ static int twl6040_probe(struct i2c_client *client,
 
 	twl6040->supplies[0].supply = "vio";
 	twl6040->supplies[1].supply = "v2v1";
-	ret = regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
+	ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
 				 twl6040->supplies);
 	if (ret != 0) {
 		dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
@@ -564,7 +564,7 @@ static int twl6040_probe(struct i2c_client *client,
 	ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 	if (ret != 0) {
 		dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
-		goto power_err;
+		goto regulator_get_err;
 	}
 
 	twl6040->dev = &client->dev;
@@ -586,8 +586,8 @@ static int twl6040_probe(struct i2c_client *client,
 		twl6040->audpwron = -EINVAL;
 
 	if (gpio_is_valid(twl6040->audpwron)) {
-		ret = gpio_request_one(twl6040->audpwron, GPIOF_OUT_INIT_LOW,
-				       "audpwron");
+		ret = devm_gpio_request_one(&client->dev, twl6040->audpwron,
+					GPIOF_OUT_INIT_LOW, "audpwron");
 		if (ret)
 			goto gpio_err;
 	}
@@ -596,14 +596,14 @@ static int twl6040_probe(struct i2c_client *client,
 			IRQF_ONESHOT, 0, &twl6040_irq_chip,
 			&twl6040->irq_data);
 	if (ret < 0)
-		goto irq_init_err;
+		goto gpio_err;
 
 	twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
 					       TWL6040_IRQ_READY);
 	twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
 					       TWL6040_IRQ_TH);
 
-	ret = request_threaded_irq(twl6040->irq_ready, NULL,
+	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
 				   twl6040_readyint_handler, IRQF_ONESHOT,
 				   "twl6040_irq_ready", twl6040);
 	if (ret) {
@@ -611,7 +611,7 @@ static int twl6040_probe(struct i2c_client *client,
 		goto readyirq_err;
 	}
 
-	ret = request_threaded_irq(twl6040->irq_th, NULL,
+	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
 				   twl6040_thint_handler, IRQF_ONESHOT,
 				   "twl6040_irq_th", twl6040);
 	if (ret) {
@@ -681,18 +681,13 @@ static int twl6040_probe(struct i2c_client *client,
 	return 0;
 
 mfd_err:
-	free_irq(twl6040->irq_th, twl6040);
+	devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
 thirq_err:
-	free_irq(twl6040->irq_ready, twl6040);
+	devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
 readyirq_err:
 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
-irq_init_err:
-	if (gpio_is_valid(twl6040->audpwron))
-		gpio_free(twl6040->audpwron);
 gpio_err:
 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-power_err:
-	regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 regulator_get_err:
 	i2c_set_clientdata(client, NULL);
 err:
@@ -706,18 +701,14 @@ static int twl6040_remove(struct i2c_client *client)
 	if (twl6040->power_count)
 		twl6040_power(twl6040, 0);
 
-	if (gpio_is_valid(twl6040->audpwron))
-		gpio_free(twl6040->audpwron);
-
-	free_irq(twl6040->irq_ready, twl6040);
-	free_irq(twl6040->irq_th, twl6040);
+	devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
+	devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
 
 	mfd_remove_devices(&client->dev);
 	i2c_set_clientdata(client, NULL);
 
 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-	regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 
 	return 0;
 }
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index daf69527ed83..e9031fa9d53d 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -75,6 +75,11 @@ static int ucb1400_core_probe(struct device *dev)
 
 	/* GPIO */
 	ucb_gpio.ac97 = ac97;
+	if (pdata) {
+		ucb_gpio.gpio_setup = pdata->gpio_setup;
+		ucb_gpio.gpio_teardown = pdata->gpio_teardown;
+		ucb_gpio.gpio_offset = pdata->gpio_offset;
+	}
 	ucb->ucb1400_gpio = platform_device_alloc("ucb1400_gpio", -1);
 	if (!ucb->ucb1400_gpio) {
 		err = -ENOMEM;
diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c
index 3c1723aa6225..84ce6b9daa3d 100644
--- a/drivers/mfd/vexpress-config.c
+++ b/drivers/mfd/vexpress-config.c
@@ -184,13 +184,14 @@ static int vexpress_config_schedule(struct vexpress_config_trans *trans)
 
 	spin_lock_irqsave(&bridge->transactions_lock, flags);
 
-	vexpress_config_dump_trans("Executing", trans);
-
-	if (list_empty(&bridge->transactions))
+	if (list_empty(&bridge->transactions)) {
+		vexpress_config_dump_trans("Executing", trans);
 		status = bridge->info->func_exec(trans->func->func,
 				trans->offset, trans->write, trans->data);
-	else
+	} else {
+		vexpress_config_dump_trans("Queuing", trans);
 		status = VEXPRESS_CONFIG_STATUS_WAIT;
+	}
 
 	switch (status) {
 	case VEXPRESS_CONFIG_STATUS_DONE:
@@ -212,25 +213,31 @@ void vexpress_config_complete(struct vexpress_config_bridge *bridge,
 {
 	struct vexpress_config_trans *trans;
 	unsigned long flags;
+	const char *message = "Completed";
 
 	spin_lock_irqsave(&bridge->transactions_lock, flags);
 
 	trans = list_first_entry(&bridge->transactions,
 			struct vexpress_config_trans, list);
-	vexpress_config_dump_trans("Completed", trans);
-
 	trans->status = status;
-	list_del(&trans->list);
 
-	if (!list_empty(&bridge->transactions)) {
-		vexpress_config_dump_trans("Pending", trans);
+	do {
+		vexpress_config_dump_trans(message, trans);
+		list_del(&trans->list);
+		complete(&trans->completion);
 
-		bridge->info->func_exec(trans->func->func, trans->offset,
-				trans->write, trans->data);
-	}
-	spin_unlock_irqrestore(&bridge->transactions_lock, flags);
+		if (list_empty(&bridge->transactions))
+			break;
+
+		trans = list_first_entry(&bridge->transactions,
+				struct vexpress_config_trans, list);
+		vexpress_config_dump_trans("Executing pending", trans);
+		trans->status = bridge->info->func_exec(trans->func->func,
+				trans->offset, trans->write, trans->data);
+		message = "Finished pending";
+	} while (trans->status == VEXPRESS_CONFIG_STATUS_DONE);
 
-	complete(&trans->completion);
+	spin_unlock_irqrestore(&bridge->transactions_lock, flags);
 }
 EXPORT_SYMBOL(vexpress_config_complete);
 
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index bf75e967a1f3..96a020b1dcd1 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -490,12 +490,12 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	vexpress_sysreg_dev = &pdev->dev;
+
 	platform_device_register_data(vexpress_sysreg_dev, "leds-gpio",
 			PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata,
 			sizeof(vexpress_sysreg_leds_pdata));
 
-	vexpress_sysreg_dev = &pdev->dev;
-
 	device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id);
 
 	return 0;
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index f70c4956ff9d..155c4a1a6a99 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/device.h>
 #include <linux/module.h>
 
 #include <linux/mfd/arizona/core.h>
@@ -57,31 +58,54 @@ static const struct reg_default wm5102_reva_patch[] = {
 };
 
 static const struct reg_default wm5102_revb_patch[] = {
+	{ 0x19, 0x0001 },
 	{ 0x80, 0x0003 },
 	{ 0x081, 0xE022 },
-	{ 0x410, 0x4080 },
-	{ 0x418, 0x4080 },
-	{ 0x420, 0x4080 },
-	{ 0x428, 0xC000 },
+	{ 0x410, 0x6080 },
+	{ 0x418, 0xa080 },
+	{ 0x420, 0xa080 },
+	{ 0x428, 0xe000 },
+	{ 0x443, 0xDC1A },
 	{ 0x4B0, 0x0066 },
 	{ 0x458, 0x000b },
 	{ 0x212, 0x0000 },
+	{ 0x171, 0x0000 },
+	{ 0x35E, 0x000C },
+	{ 0x2D4, 0x0000 },
 	{ 0x80, 0x0000 },
 };
 
 /* We use a function so we can use ARRAY_SIZE() */
 int wm5102_patch(struct arizona *arizona)
 {
+	const struct reg_default *wm5102_patch;
+	int ret = 0;
+	int i, patch_size;
+
 	switch (arizona->rev) {
 	case 0:
-		return regmap_register_patch(arizona->regmap,
-					     wm5102_reva_patch,
-					     ARRAY_SIZE(wm5102_reva_patch));
+		wm5102_patch = wm5102_reva_patch;
+		patch_size = ARRAY_SIZE(wm5102_reva_patch);
 	default:
-		return regmap_register_patch(arizona->regmap,
-					     wm5102_revb_patch,
-					     ARRAY_SIZE(wm5102_revb_patch));
+		wm5102_patch = wm5102_revb_patch;
+		patch_size = ARRAY_SIZE(wm5102_revb_patch);
+	}
+
+	regcache_cache_bypass(arizona->regmap, true);
+
+	for (i = 0; i < patch_size; i++) {
+		ret = regmap_write(arizona->regmap, wm5102_patch[i].reg,
+				   wm5102_patch[i].def);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to write %x = %x: %d\n",
+				wm5102_patch[i].reg, wm5102_patch[i].def, ret);
+			goto out;
+		}
 	}
+
+out:
+	regcache_cache_bypass(arizona->regmap, false);
+	return ret;
 }
 
 static const struct regmap_irq wm5102_aod_irqs[ARIZONA_NUM_IRQ] = {
@@ -282,7 +306,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000155, 0x0000 },   /* R341   - Rate Estimator 4 */ 
 	{ 0x00000156, 0x0000 },   /* R342   - Rate Estimator 5 */ 
 	{ 0x00000161, 0x0000 },   /* R353   - Dynamic Frequency Scaling 1 */ 
-	{ 0x00000171, 0x0002 },   /* R369   - FLL1 Control 1 */
+	{ 0x00000171, 0x0000 },   /* R369   - FLL1 Control 1 */
 	{ 0x00000172, 0x0008 },   /* R370   - FLL1 Control 2 */ 
 	{ 0x00000173, 0x0018 },   /* R371   - FLL1 Control 3 */ 
 	{ 0x00000174, 0x007D },   /* R372   - FLL1 Control 4 */ 
@@ -366,7 +390,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000400, 0x0000 },   /* R1024  - Output Enables 1 */ 
 	{ 0x00000408, 0x0000 },   /* R1032  - Output Rate 1 */ 
 	{ 0x00000409, 0x0022 },   /* R1033  - Output Volume Ramp */ 
-	{ 0x00000410, 0x4080 },   /* R1040  - Output Path Config 1L */
+	{ 0x00000410, 0x6080 },   /* R1040  - Output Path Config 1L */
 	{ 0x00000411, 0x0180 },   /* R1041  - DAC Digital Volume 1L */ 
 	{ 0x00000412, 0x0081 },   /* R1042  - DAC Volume Limit 1L */
 	{ 0x00000413, 0x0001 },   /* R1043  - Noise Gate Select 1L */ 
@@ -374,7 +398,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000415, 0x0180 },   /* R1045  - DAC Digital Volume 1R */ 
 	{ 0x00000416, 0x0081 },   /* R1046  - DAC Volume Limit 1R */
 	{ 0x00000417, 0x0002 },   /* R1047  - Noise Gate Select 1R */ 
-	{ 0x00000418, 0x4080 },   /* R1048  - Output Path Config 2L */
+	{ 0x00000418, 0xA080 },   /* R1048  - Output Path Config 2L */
 	{ 0x00000419, 0x0180 },   /* R1049  - DAC Digital Volume 2L */ 
 	{ 0x0000041A, 0x0081 },   /* R1050  - DAC Volume Limit 2L */
 	{ 0x0000041B, 0x0004 },   /* R1051  - Noise Gate Select 2L */ 
@@ -382,11 +406,11 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x0000041D, 0x0180 },   /* R1053  - DAC Digital Volume 2R */ 
 	{ 0x0000041E, 0x0081 },   /* R1054  - DAC Volume Limit 2R */
 	{ 0x0000041F, 0x0008 },   /* R1055  - Noise Gate Select 2R */ 
-	{ 0x00000420, 0x4080 },   /* R1056  - Output Path Config 3L */
+	{ 0x00000420, 0xA080 },   /* R1056  - Output Path Config 3L */
 	{ 0x00000421, 0x0180 },   /* R1057  - DAC Digital Volume 3L */ 
 	{ 0x00000422, 0x0081 },   /* R1058  - DAC Volume Limit 3L */
 	{ 0x00000423, 0x0010 },   /* R1059  - Noise Gate Select 3L */ 
-	{ 0x00000428, 0xC000 },   /* R1064  - Output Path Config 4L */
+	{ 0x00000428, 0xE000 },   /* R1064  - Output Path Config 4L */
 	{ 0x00000429, 0x0180 },   /* R1065  - DAC Digital Volume 4L */ 
 	{ 0x0000042A, 0x0081 },   /* R1066  - Out Volume 4L */
 	{ 0x0000042B, 0x0040 },   /* R1067  - Noise Gate Select 4L */ 
@@ -401,7 +425,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000436, 0x0081 },   /* R1078  - DAC Volume Limit 5R */
 	{ 0x00000437, 0x0200 },   /* R1079  - Noise Gate Select 5R */
 	{ 0x00000450, 0x0000 },   /* R1104  - DAC AEC Control 1 */ 
-	{ 0x00000458, 0x0001 },   /* R1112  - Noise Gate Control */ 
+	{ 0x00000458, 0x000B },   /* R1112  - Noise Gate Control */
 	{ 0x00000490, 0x0069 },   /* R1168  - PDM SPK1 CTRL 1 */ 
 	{ 0x00000491, 0x0000 },   /* R1169  - PDM SPK1 CTRL 2 */ 
 	{ 0x00000500, 0x000C },   /* R1280  - AIF1 BCLK Ctrl */ 
diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c
index 4e70e157a909..e7ed14f661d8 100644
--- a/drivers/mfd/wm831x-spi.c
+++ b/drivers/mfd/wm831x-spi.c
@@ -37,7 +37,7 @@ static int wm831x_spi_probe(struct spi_device *spi)
 	spi->bits_per_word = 16;
 	spi->mode = SPI_MODE_0;
 
-	dev_set_drvdata(&spi->dev, wm831x);
+	spi_set_drvdata(spi, wm831x);
 	wm831x->dev = &spi->dev;
 
 	wm831x->regmap = devm_regmap_init_spi(spi, &wm831x_regmap_config);
@@ -53,7 +53,7 @@ static int wm831x_spi_probe(struct spi_device *spi)
 
 static int wm831x_spi_remove(struct spi_device *spi)
 {
-	struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
+	struct wm831x *wm831x = spi_get_drvdata(spi);
 
 	wm831x_device_exit(wm831x);
 
@@ -69,7 +69,7 @@ static int wm831x_spi_suspend(struct device *dev)
 
 static void wm831x_spi_shutdown(struct spi_device *spi)
 {
-	struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
+	struct wm831x *wm831x = spi_get_drvdata(spi);
 
 	wm831x_device_shutdown(wm831x);
 }
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 803e93fae56a..00e4fe2f3c75 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -19,6 +19,9 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/mfd/core.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -191,7 +194,7 @@ static const char *wm8958_main_supplies[] = {
 	"SPKVDD2",
 };
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_RUNTIME
 static int wm8994_suspend(struct device *dev)
 {
 	struct wm8994 *wm8994 = dev_get_drvdata(dev);
@@ -396,6 +399,60 @@ static const struct reg_default wm1811_reva_patch[] = {
 	{ 0x102, 0x0 },
 };
 
+#ifdef CONFIG_OF
+static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
+{
+	struct device_node *np = wm8994->dev->of_node;
+	struct wm8994_pdata *pdata = &wm8994->pdata;
+	int i;
+
+	if (!np)
+		return 0;
+
+	if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults,
+				       ARRAY_SIZE(pdata->gpio_defaults)) >= 0) {
+		for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
+			if (wm8994->pdata.gpio_defaults[i] == 0)
+				pdata->gpio_defaults[i]
+					= WM8994_CONFIGURE_GPIO;
+		}
+	}
+
+	of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias,
+				   ARRAY_SIZE(pdata->micbias));
+
+	pdata->lineout1_diff = true;
+	pdata->lineout2_diff = true;
+	if (of_find_property(np, "wlf,lineout1-se", NULL))
+		pdata->lineout1_diff = false;
+	if (of_find_property(np, "wlf,lineout2-se", NULL))
+		pdata->lineout2_diff = false;
+
+	if (of_find_property(np, "wlf,lineout1-feedback", NULL))
+		pdata->lineout1fb = true;
+	if (of_find_property(np, "wlf,lineout2-feedback", NULL))
+		pdata->lineout2fb = true;
+
+	if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
+		pdata->lineout2fb = true;
+
+	pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0);
+	if (pdata->ldo[0].enable < 0)
+		pdata->ldo[0].enable = 0;
+
+	pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0);
+	if (pdata->ldo[1].enable < 0)
+		pdata->ldo[1].enable = 0;
+
+	return 0;
+}
+#else
+static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
+{
+	return 0;
+}
+#endif
+
 /*
  * Instantiate the generic non-control parts of the device.
  */
@@ -405,7 +462,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	struct regmap_config *regmap_config;
 	const struct reg_default *regmap_patch = NULL;
 	const char *devname;
-	int ret, i, patch_regs;
+	int ret, i, patch_regs = 0;
 	int pulls = 0;
 
 	if (dev_get_platdata(wm8994->dev)) {
@@ -414,6 +471,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 	pdata = &wm8994->pdata;
 
+	ret = wm8994_set_pdata_from_of(wm8994);
+	if (ret != 0)
+		return ret;
+
 	dev_set_drvdata(wm8994->dev, wm8994);
 
 	/* Add the on-chip regulators first for bootstrapping */
@@ -673,9 +734,9 @@ static void wm8994_device_exit(struct wm8994 *wm8994)
 }
 
 static const struct of_device_id wm8994_of_match[] = {
-	{ .compatible = "wlf,wm1811", },
-	{ .compatible = "wlf,wm8994", },
-	{ .compatible = "wlf,wm8958", },
+	{ .compatible = "wlf,wm1811", .data = (void *)WM1811 },
+	{ .compatible = "wlf,wm8994", .data = (void *)WM8994 },
+	{ .compatible = "wlf,wm8958", .data = (void *)WM8958 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, wm8994_of_match);
@@ -683,6 +744,7 @@ MODULE_DEVICE_TABLE(of, wm8994_of_match);
 static int wm8994_i2c_probe(struct i2c_client *i2c,
 				      const struct i2c_device_id *id)
 {
+	const struct of_device_id *of_id;
 	struct wm8994 *wm8994;
 	int ret;
 
@@ -693,7 +755,14 @@ static int wm8994_i2c_probe(struct i2c_client *i2c,
 	i2c_set_clientdata(i2c, wm8994);
 	wm8994->dev = &i2c->dev;
 	wm8994->irq = i2c->irq;
-	wm8994->type = id->driver_data;
+
+	if (i2c->dev.of_node) {
+		of_id = of_match_device(wm8994_of_match, &i2c->dev);
+		if (of_id)
+			wm8994->type = (int)of_id->data;
+	} else {
+		wm8994->type = id->driver_data;
+	}
 
 	wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
 	if (IS_ERR(wm8994->regmap)) {
@@ -724,15 +793,16 @@ static const struct i2c_device_id wm8994_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
 
-static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume,
-			    NULL);
+static const struct dev_pm_ops wm8994_pm_ops = {
+	SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL)
+};
 
 static struct i2c_driver wm8994_i2c_driver = {
 	.driver = {
 		.name = "wm8994",
 		.owner = THIS_MODULE,
 		.pm = &wm8994_pm_ops,
-		.of_match_table = wm8994_of_match,
+		.of_match_table = of_match_ptr(wm8994_of_match),
 	},
 	.probe = wm8994_i2c_probe,
 	.remove = wm8994_i2c_remove,
diff --git a/drivers/power/rx51_battery.c b/drivers/power/rx51_battery.c
index 1a1dcb831a17..cbde1d6d3228 100644
--- a/drivers/power/rx51_battery.c
+++ b/drivers/power/rx51_battery.c
@@ -42,6 +42,7 @@ static int rx51_battery_read_adc(int channel)
 	req.method = TWL4030_MADC_SW1;
 	req.func_cb = NULL;
 	req.type = TWL4030_MADC_WAIT;
+	req.raw = true;
 
 	if (twl4030_madc_conversion(&req) <= 0)
 		return -ENODATA;
diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h
index 530e11ba0738..01f595107048 100644
--- a/include/linux/i2c/twl4030-madc.h
+++ b/include/linux/i2c/twl4030-madc.h
@@ -39,6 +39,7 @@ struct twl4030_madc_conversion_method {
  * @do_avgP:	sample the input channel for 4 consecutive cycles
  * @method:	RT, SW1, SW2
  * @type:	Polling or interrupt based method
+ * @raw:	Return raw value, do not convert it
  */
 
 struct twl4030_madc_request {
@@ -48,6 +49,7 @@ struct twl4030_madc_request {
 	u16 type;
 	bool active;
 	bool result_pending;
+	bool raw;
 	int rbuf[TWL4030_MADC_MAX_CHANNELS];
 	void (*func_cb)(int len, int channels, int *buf);
 };
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index 5f3aa6b11bfa..27e06acc509a 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -81,4 +81,23 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
 			       unsigned short *keymap,
 			       struct input_dev *input_dev);
 
+#ifdef CONFIG_OF
+/**
+ * matrix_keypad_parse_of_params() - Read parameters from matrix-keypad node
+ *
+ * @dev: Device containing of_node
+ * @rows: Returns number of matrix rows
+ * @cols: Returns number of matrix columns
+ * @return 0 if OK, <0 on error
+ */
+int matrix_keypad_parse_of_params(struct device *dev,
+				  unsigned int *rows, unsigned int *cols);
+#else
+static inline int matrix_keypad_parse_of_params(struct device *dev,
+				  unsigned int *rows, unsigned int *cols)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_OF */
+
 #endif /* _MATRIX_KEYPAD_H */
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index a0f940987a3e..80dead1f7100 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -78,6 +78,7 @@ struct arizona_micbias {
 	unsigned int ext_cap:1;    /** External capacitor fitted */
 	unsigned int discharge:1;  /** Actively discharge */
 	unsigned int fast_start:1; /** Enable aggressive startup ramp rate */
+	unsigned int bypass:1;     /** Use bypass mode */
 };
 
 struct arizona_micd_config {
@@ -104,7 +105,8 @@ struct arizona_pdata {
 	/** If a direct 32kHz clock is provided on an MCLK specify it here */
 	int clk32k_src;
 
-	bool irq_active_high; /** IRQ polarity */
+	/** Mode for primary IRQ (defaults to active low) */
+	unsigned int irq_flags;
 
 	/* Base GPIO */
 	int gpio_base;
@@ -183,6 +185,9 @@ struct arizona_pdata {
 
 	/** Haptic actuator type */
 	unsigned int hap_act;
+
+	/** GPIO for primary IRQ (used for edge triggered emulation) */
+	int irq_gpio;
 };
 
 #endif
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
new file mode 100644
index 000000000000..032af7fc5b2e
--- /dev/null
+++ b/include/linux/mfd/cros_ec.h
@@ -0,0 +1,170 @@
+/*
+ * ChromeOS EC multi-function device
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_CROS_EC_H
+#define __LINUX_MFD_CROS_EC_H
+
+#include <linux/mfd/cros_ec_commands.h>
+
+/*
+ * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
+ */
+enum {
+	EC_MSG_TX_HEADER_BYTES	= 3,
+	EC_MSG_TX_TRAILER_BYTES	= 1,
+	EC_MSG_TX_PROTO_BYTES	= EC_MSG_TX_HEADER_BYTES +
+					EC_MSG_TX_TRAILER_BYTES,
+	EC_MSG_RX_PROTO_BYTES	= 3,
+
+	/* Max length of messages */
+	EC_MSG_BYTES		= EC_HOST_PARAM_SIZE + EC_MSG_TX_PROTO_BYTES,
+
+};
+
+/**
+ * struct cros_ec_msg - A message sent to the EC, and its reply
+ *
+ * @version: Command version number (often 0)
+ * @cmd: Command to send (EC_CMD_...)
+ * @out_buf: Outgoing payload (to EC)
+ * @outlen: Outgoing length
+ * @in_buf: Incoming payload (from EC)
+ * @in_len: Incoming length
+ */
+struct cros_ec_msg {
+	u8 version;
+	u8 cmd;
+	uint8_t *out_buf;
+	int out_len;
+	uint8_t *in_buf;
+	int in_len;
+};
+
+/**
+ * struct cros_ec_device - Information about a ChromeOS EC device
+ *
+ * @name: Name of this EC interface
+ * @priv: Private data
+ * @irq: Interrupt to use
+ * @din: input buffer (from EC)
+ * @dout: output buffer (to EC)
+ * \note
+ * These two buffers will always be dword-aligned and include enough
+ * space for up to 7 word-alignment bytes also, so we can ensure that
+ * the body of the message is always dword-aligned (64-bit).
+ *
+ * We use this alignment to keep ARM and x86 happy. Probably word
+ * alignment would be OK, there might be a small performance advantage
+ * to using dword.
+ * @din_size: size of din buffer
+ * @dout_size: size of dout buffer
+ * @command_send: send a command
+ * @command_recv: receive a command
+ * @ec_name: name of EC device (e.g. 'chromeos-ec')
+ * @phys_name: name of physical comms layer (e.g. 'i2c-4')
+ * @parent: pointer to parent device (e.g. i2c or spi device)
+ * @dev: Device pointer
+ * dev_lock: Lock to prevent concurrent access
+ * @wake_enabled: true if this device can wake the system from sleep
+ * @was_wake_device: true if this device was set to wake the system from
+ * sleep at the last suspend
+ * @event_notifier: interrupt event notifier for transport devices
+ */
+struct cros_ec_device {
+	const char *name;
+	void *priv;
+	int irq;
+	uint8_t *din;
+	uint8_t *dout;
+	int din_size;
+	int dout_size;
+	int (*command_send)(struct cros_ec_device *ec,
+			uint16_t cmd, void *out_buf, int out_len);
+	int (*command_recv)(struct cros_ec_device *ec,
+			uint16_t cmd, void *in_buf, int in_len);
+	int (*command_sendrecv)(struct cros_ec_device *ec,
+			uint16_t cmd, void *out_buf, int out_len,
+			void *in_buf, int in_len);
+	int (*command_xfer)(struct cros_ec_device *ec,
+			struct cros_ec_msg *msg);
+
+	const char *ec_name;
+	const char *phys_name;
+	struct device *parent;
+
+	/* These are --private-- fields - do not assign */
+	struct device *dev;
+	struct mutex dev_lock;
+	bool wake_enabled;
+	bool was_wake_device;
+	struct blocking_notifier_head event_notifier;
+};
+
+/**
+ * cros_ec_suspend - Handle a suspend operation for the ChromeOS EC device
+ *
+ * This can be called by drivers to handle a suspend event.
+ *
+ * ec_dev: Device to suspend
+ * @return 0 if ok, -ve on error
+ */
+int cros_ec_suspend(struct cros_ec_device *ec_dev);
+
+/**
+ * cros_ec_resume - Handle a resume operation for the ChromeOS EC device
+ *
+ * This can be called by drivers to handle a resume event.
+ *
+ * @ec_dev: Device to resume
+ * @return 0 if ok, -ve on error
+ */
+int cros_ec_resume(struct cros_ec_device *ec_dev);
+
+/**
+ * cros_ec_prepare_tx - Prepare an outgoing message in the output buffer
+ *
+ * This is intended to be used by all ChromeOS EC drivers, but at present
+ * only SPI uses it. Once LPC uses the same protocol it can start using it.
+ * I2C could use it now, with a refactor of the existing code.
+ *
+ * @ec_dev: Device to register
+ * @msg: Message to write
+ */
+int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
+		       struct cros_ec_msg *msg);
+
+/**
+ * cros_ec_remove - Remove a ChromeOS EC
+ *
+ * Call this to deregister a ChromeOS EC. After this you should call
+ * cros_ec_free().
+ *
+ * @ec_dev: Device to register
+ * @return 0 if ok, -ve on error
+ */
+int cros_ec_remove(struct cros_ec_device *ec_dev);
+
+/**
+ * cros_ec_register - Register a new ChromeOS EC, using the provided info
+ *
+ * Before calling this, allocate a pointer to a new device and then fill
+ * in all the fields up to the --private-- marker.
+ *
+ * @ec_dev: Device to register
+ * @return 0 if ok, -ve on error
+ */
+int cros_ec_register(struct cros_ec_device *ec_dev);
+
+#endif /* __LINUX_MFD_CROS_EC_H */
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
new file mode 100644
index 000000000000..86fd06953bcd
--- /dev/null
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -0,0 +1,1369 @@
+/*
+ * Host communication command constants for ChromeOS EC
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * The ChromeOS EC multi function device is used to mux all the requests
+ * to the EC device for its multiple features: keyboard controller,
+ * battery charging and regulator control, firmware update.
+ *
+ * NOTE: This file is copied verbatim from the ChromeOS EC Open Source
+ * project in an attempt to make future updates easy to make.
+ */
+
+#ifndef __CROS_EC_COMMANDS_H
+#define __CROS_EC_COMMANDS_H
+
+/*
+ * Protocol overview
+ *
+ * request:  CMD [ P0 P1 P2 ... Pn S ]
+ * response: ERR [ P0 P1 P2 ... Pn S ]
+ *
+ * where the bytes are defined as follow :
+ *      - CMD is the command code. (defined by EC_CMD_ constants)
+ *      - ERR is the error code. (defined by EC_RES_ constants)
+ *      - Px is the optional payload.
+ *        it is not sent if the error code is not success.
+ *        (defined by ec_params_ and ec_response_ structures)
+ *      - S is the checksum which is the sum of all payload bytes.
+ *
+ * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD
+ * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM.
+ * On I2C, all bytes are sent serially in the same message.
+ */
+
+/* Current version of this protocol */
+#define EC_PROTO_VERSION          0x00000002
+
+/* Command version mask */
+#define EC_VER_MASK(version) (1UL << (version))
+
+/* I/O addresses for ACPI commands */
+#define EC_LPC_ADDR_ACPI_DATA  0x62
+#define EC_LPC_ADDR_ACPI_CMD   0x66
+
+/* I/O addresses for host command */
+#define EC_LPC_ADDR_HOST_DATA  0x200
+#define EC_LPC_ADDR_HOST_CMD   0x204
+
+/* I/O addresses for host command args and params */
+#define EC_LPC_ADDR_HOST_ARGS  0x800
+#define EC_LPC_ADDR_HOST_PARAM 0x804
+#define EC_HOST_PARAM_SIZE     0x0fc  /* Size of param area in bytes */
+
+/* I/O addresses for host command params, old interface */
+#define EC_LPC_ADDR_OLD_PARAM  0x880
+#define EC_OLD_PARAM_SIZE      0x080  /* Size of param area in bytes */
+
+/* EC command register bit functions */
+#define EC_LPC_CMDR_DATA	(1 << 0)  /* Data ready for host to read */
+#define EC_LPC_CMDR_PENDING	(1 << 1)  /* Write pending to EC */
+#define EC_LPC_CMDR_BUSY	(1 << 2)  /* EC is busy processing a command */
+#define EC_LPC_CMDR_CMD		(1 << 3)  /* Last host write was a command */
+#define EC_LPC_CMDR_ACPI_BRST	(1 << 4)  /* Burst mode (not used) */
+#define EC_LPC_CMDR_SCI		(1 << 5)  /* SCI event is pending */
+#define EC_LPC_CMDR_SMI		(1 << 6)  /* SMI event is pending */
+
+#define EC_LPC_ADDR_MEMMAP       0x900
+#define EC_MEMMAP_SIZE         255 /* ACPI IO buffer max is 255 bytes */
+#define EC_MEMMAP_TEXT_MAX     8   /* Size of a string in the memory map */
+
+/* The offset address of each type of data in mapped memory. */
+#define EC_MEMMAP_TEMP_SENSOR      0x00 /* Temp sensors */
+#define EC_MEMMAP_FAN              0x10 /* Fan speeds */
+#define EC_MEMMAP_TEMP_SENSOR_B    0x18 /* Temp sensors (second set) */
+#define EC_MEMMAP_ID               0x20 /* 'E' 'C' */
+#define EC_MEMMAP_ID_VERSION       0x22 /* Version of data in 0x20 - 0x2f */
+#define EC_MEMMAP_THERMAL_VERSION  0x23 /* Version of data in 0x00 - 0x1f */
+#define EC_MEMMAP_BATTERY_VERSION  0x24 /* Version of data in 0x40 - 0x7f */
+#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */
+#define EC_MEMMAP_EVENTS_VERSION   0x26 /* Version of data in 0x34 - 0x3f */
+#define EC_MEMMAP_HOST_CMD_FLAGS   0x27 /* Host command interface flags */
+#define EC_MEMMAP_SWITCHES         0x30
+#define EC_MEMMAP_HOST_EVENTS      0x34
+#define EC_MEMMAP_BATT_VOLT        0x40 /* Battery Present Voltage */
+#define EC_MEMMAP_BATT_RATE        0x44 /* Battery Present Rate */
+#define EC_MEMMAP_BATT_CAP         0x48 /* Battery Remaining Capacity */
+#define EC_MEMMAP_BATT_FLAG        0x4c /* Battery State, defined below */
+#define EC_MEMMAP_BATT_DCAP        0x50 /* Battery Design Capacity */
+#define EC_MEMMAP_BATT_DVLT        0x54 /* Battery Design Voltage */
+#define EC_MEMMAP_BATT_LFCC        0x58 /* Battery Last Full Charge Capacity */
+#define EC_MEMMAP_BATT_CCNT        0x5c /* Battery Cycle Count */
+#define EC_MEMMAP_BATT_MFGR        0x60 /* Battery Manufacturer String */
+#define EC_MEMMAP_BATT_MODEL       0x68 /* Battery Model Number String */
+#define EC_MEMMAP_BATT_SERIAL      0x70 /* Battery Serial Number String */
+#define EC_MEMMAP_BATT_TYPE        0x78 /* Battery Type String */
+
+/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */
+#define EC_TEMP_SENSOR_ENTRIES     16
+/*
+ * Number of temp sensors at EC_MEMMAP_TEMP_SENSOR_B.
+ *
+ * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2.
+ */
+#define EC_TEMP_SENSOR_B_ENTRIES      8
+#define EC_TEMP_SENSOR_NOT_PRESENT    0xff
+#define EC_TEMP_SENSOR_ERROR          0xfe
+#define EC_TEMP_SENSOR_NOT_POWERED    0xfd
+#define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc
+/*
+ * The offset of temperature value stored in mapped memory.  This allows
+ * reporting a temperature range of 200K to 454K = -73C to 181C.
+ */
+#define EC_TEMP_SENSOR_OFFSET      200
+
+#define EC_FAN_SPEED_ENTRIES       4       /* Number of fans at EC_MEMMAP_FAN */
+#define EC_FAN_SPEED_NOT_PRESENT   0xffff  /* Entry not present */
+#define EC_FAN_SPEED_STALLED       0xfffe  /* Fan stalled */
+
+/* Battery bit flags at EC_MEMMAP_BATT_FLAG. */
+#define EC_BATT_FLAG_AC_PRESENT   0x01
+#define EC_BATT_FLAG_BATT_PRESENT 0x02
+#define EC_BATT_FLAG_DISCHARGING  0x04
+#define EC_BATT_FLAG_CHARGING     0x08
+#define EC_BATT_FLAG_LEVEL_CRITICAL 0x10
+
+/* Switch flags at EC_MEMMAP_SWITCHES */
+#define EC_SWITCH_LID_OPEN               0x01
+#define EC_SWITCH_POWER_BUTTON_PRESSED   0x02
+#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04
+/* Recovery requested via keyboard */
+#define EC_SWITCH_KEYBOARD_RECOVERY      0x08
+/* Recovery requested via dedicated signal (from servo board) */
+#define EC_SWITCH_DEDICATED_RECOVERY     0x10
+/* Was fake developer mode switch; now unused.  Remove in next refactor. */
+#define EC_SWITCH_IGNORE0                0x20
+
+/* Host command interface flags */
+/* Host command interface supports LPC args (LPC interface only) */
+#define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED  0x01
+
+/* Wireless switch flags */
+#define EC_WIRELESS_SWITCH_WLAN      0x01
+#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02
+
+/*
+ * This header file is used in coreboot both in C and ACPI code.  The ACPI code
+ * is pre-processed to handle constants but the ASL compiler is unable to
+ * handle actual C code so keep it separate.
+ */
+#ifndef __ACPI__
+
+/* LPC command status byte masks */
+/* EC has written a byte in the data register and host hasn't read it yet */
+#define EC_LPC_STATUS_TO_HOST     0x01
+/* Host has written a command/data byte and the EC hasn't read it yet */
+#define EC_LPC_STATUS_FROM_HOST   0x02
+/* EC is processing a command */
+#define EC_LPC_STATUS_PROCESSING  0x04
+/* Last write to EC was a command, not data */
+#define EC_LPC_STATUS_LAST_CMD    0x08
+/* EC is in burst mode.  Unsupported by Chrome EC, so this bit is never set */
+#define EC_LPC_STATUS_BURST_MODE  0x10
+/* SCI event is pending (requesting SCI query) */
+#define EC_LPC_STATUS_SCI_PENDING 0x20
+/* SMI event is pending (requesting SMI query) */
+#define EC_LPC_STATUS_SMI_PENDING 0x40
+/* (reserved) */
+#define EC_LPC_STATUS_RESERVED    0x80
+
+/*
+ * EC is busy.  This covers both the EC processing a command, and the host has
+ * written a new command but the EC hasn't picked it up yet.
+ */
+#define EC_LPC_STATUS_BUSY_MASK \
+	(EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING)
+
+/* Host command response codes */
+enum ec_status {
+	EC_RES_SUCCESS = 0,
+	EC_RES_INVALID_COMMAND = 1,
+	EC_RES_ERROR = 2,
+	EC_RES_INVALID_PARAM = 3,
+	EC_RES_ACCESS_DENIED = 4,
+	EC_RES_INVALID_RESPONSE = 5,
+	EC_RES_INVALID_VERSION = 6,
+	EC_RES_INVALID_CHECKSUM = 7,
+	EC_RES_IN_PROGRESS = 8,		/* Accepted, command in progress */
+	EC_RES_UNAVAILABLE = 9,		/* No response available */
+	EC_RES_TIMEOUT = 10,		/* We got a timeout */
+	EC_RES_OVERFLOW = 11,		/* Table / data overflow */
+};
+
+/*
+ * Host event codes.  Note these are 1-based, not 0-based, because ACPI query
+ * EC command uses code 0 to mean "no event pending".  We explicitly specify
+ * each value in the enum listing so they won't change if we delete/insert an
+ * item or rearrange the list (it needs to be stable across platforms, not
+ * just within a single compiled instance).
+ */
+enum host_event_code {
+	EC_HOST_EVENT_LID_CLOSED = 1,
+	EC_HOST_EVENT_LID_OPEN = 2,
+	EC_HOST_EVENT_POWER_BUTTON = 3,
+	EC_HOST_EVENT_AC_CONNECTED = 4,
+	EC_HOST_EVENT_AC_DISCONNECTED = 5,
+	EC_HOST_EVENT_BATTERY_LOW = 6,
+	EC_HOST_EVENT_BATTERY_CRITICAL = 7,
+	EC_HOST_EVENT_BATTERY = 8,
+	EC_HOST_EVENT_THERMAL_THRESHOLD = 9,
+	EC_HOST_EVENT_THERMAL_OVERLOAD = 10,
+	EC_HOST_EVENT_THERMAL = 11,
+	EC_HOST_EVENT_USB_CHARGER = 12,
+	EC_HOST_EVENT_KEY_PRESSED = 13,
+	/*
+	 * EC has finished initializing the host interface.  The host can check
+	 * for this event following sending a EC_CMD_REBOOT_EC command to
+	 * determine when the EC is ready to accept subsequent commands.
+	 */
+	EC_HOST_EVENT_INTERFACE_READY = 14,
+	/* Keyboard recovery combo has been pressed */
+	EC_HOST_EVENT_KEYBOARD_RECOVERY = 15,
+
+	/* Shutdown due to thermal overload */
+	EC_HOST_EVENT_THERMAL_SHUTDOWN = 16,
+	/* Shutdown due to battery level too low */
+	EC_HOST_EVENT_BATTERY_SHUTDOWN = 17,
+
+	/*
+	 * The high bit of the event mask is not used as a host event code.  If
+	 * it reads back as set, then the entire event mask should be
+	 * considered invalid by the host.  This can happen when reading the
+	 * raw event status via EC_MEMMAP_HOST_EVENTS but the LPC interface is
+	 * not initialized on the EC, or improperly configured on the host.
+	 */
+	EC_HOST_EVENT_INVALID = 32
+};
+/* Host event mask */
+#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1))
+
+/* Arguments at EC_LPC_ADDR_HOST_ARGS */
+struct ec_lpc_host_args {
+	uint8_t flags;
+	uint8_t command_version;
+	uint8_t data_size;
+	/*
+	 * Checksum; sum of command + flags + command_version + data_size +
+	 * all params/response data bytes.
+	 */
+	uint8_t checksum;
+} __packed;
+
+/* Flags for ec_lpc_host_args.flags */
+/*
+ * Args are from host.  Data area at EC_LPC_ADDR_HOST_PARAM contains command
+ * params.
+ *
+ * If EC gets a command and this flag is not set, this is an old-style command.
+ * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with
+ * unknown length.  EC must respond with an old-style response (that is,
+ * withouth setting EC_HOST_ARGS_FLAG_TO_HOST).
+ */
+#define EC_HOST_ARGS_FLAG_FROM_HOST 0x01
+/*
+ * Args are from EC.  Data area at EC_LPC_ADDR_HOST_PARAM contains response.
+ *
+ * If EC responds to a command and this flag is not set, this is an old-style
+ * response.  Command version is 0 and response data from EC is at
+ * EC_LPC_ADDR_OLD_PARAM with unknown length.
+ */
+#define EC_HOST_ARGS_FLAG_TO_HOST   0x02
+
+/*
+ * Notes on commands:
+ *
+ * Each command is an 8-byte command value.  Commands which take params or
+ * return response data specify structs for that data.  If no struct is
+ * specified, the command does not input or output data, respectively.
+ * Parameter/response length is implicit in the structs.  Some underlying
+ * communication protocols (I2C, SPI) may add length or checksum headers, but
+ * those are implementation-dependent and not defined here.
+ */
+
+/*****************************************************************************/
+/* General / test commands */
+
+/*
+ * Get protocol version, used to deal with non-backward compatible protocol
+ * changes.
+ */
+#define EC_CMD_PROTO_VERSION 0x00
+
+struct ec_response_proto_version {
+	uint32_t version;
+} __packed;
+
+/*
+ * Hello.  This is a simple command to test the EC is responsive to
+ * commands.
+ */
+#define EC_CMD_HELLO 0x01
+
+struct ec_params_hello {
+	uint32_t in_data;  /* Pass anything here */
+} __packed;
+
+struct ec_response_hello {
+	uint32_t out_data;  /* Output will be in_data + 0x01020304 */
+} __packed;
+
+/* Get version number */
+#define EC_CMD_GET_VERSION 0x02
+
+enum ec_current_image {
+	EC_IMAGE_UNKNOWN = 0,
+	EC_IMAGE_RO,
+	EC_IMAGE_RW
+};
+
+struct ec_response_get_version {
+	/* Null-terminated version strings for RO, RW */
+	char version_string_ro[32];
+	char version_string_rw[32];
+	char reserved[32];       /* Was previously RW-B string */
+	uint32_t current_image;  /* One of ec_current_image */
+} __packed;
+
+/* Read test */
+#define EC_CMD_READ_TEST 0x03
+
+struct ec_params_read_test {
+	uint32_t offset;   /* Starting value for read buffer */
+	uint32_t size;     /* Size to read in bytes */
+} __packed;
+
+struct ec_response_read_test {
+	uint32_t data[32];
+} __packed;
+
+/*
+ * Get build information
+ *
+ * Response is null-terminated string.
+ */
+#define EC_CMD_GET_BUILD_INFO 0x04
+
+/* Get chip info */
+#define EC_CMD_GET_CHIP_INFO 0x05
+
+struct ec_response_get_chip_info {
+	/* Null-terminated strings */
+	char vendor[32];
+	char name[32];
+	char revision[32];  /* Mask version */
+} __packed;
+
+/* Get board HW version */
+#define EC_CMD_GET_BOARD_VERSION 0x06
+
+struct ec_response_board_version {
+	uint16_t board_version;  /* A monotonously incrementing number. */
+} __packed;
+
+/*
+ * Read memory-mapped data.
+ *
+ * This is an alternate interface to memory-mapped data for bus protocols
+ * which don't support direct-mapped memory - I2C, SPI, etc.
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_READ_MEMMAP 0x07
+
+struct ec_params_read_memmap {
+	uint8_t offset;   /* Offset in memmap (EC_MEMMAP_*) */
+	uint8_t size;     /* Size to read in bytes */
+} __packed;
+
+/* Read versions supported for a command */
+#define EC_CMD_GET_CMD_VERSIONS 0x08
+
+struct ec_params_get_cmd_versions {
+	uint8_t cmd;      /* Command to check */
+} __packed;
+
+struct ec_response_get_cmd_versions {
+	/*
+	 * Mask of supported versions; use EC_VER_MASK() to compare with a
+	 * desired version.
+	 */
+	uint32_t version_mask;
+} __packed;
+
+/*
+ * Check EC communcations status (busy). This is needed on i2c/spi but not
+ * on lpc since it has its own out-of-band busy indicator.
+ *
+ * lpc must read the status from the command register. Attempting this on
+ * lpc will overwrite the args/parameter space and corrupt its data.
+ */
+#define EC_CMD_GET_COMMS_STATUS		0x09
+
+/* Avoid using ec_status which is for return values */
+enum ec_comms_status {
+	EC_COMMS_STATUS_PROCESSING	= 1 << 0,	/* Processing cmd */
+};
+
+struct ec_response_get_comms_status {
+	uint32_t flags;		/* Mask of enum ec_comms_status */
+} __packed;
+
+
+/*****************************************************************************/
+/* Flash commands */
+
+/* Get flash info */
+#define EC_CMD_FLASH_INFO 0x10
+
+struct ec_response_flash_info {
+	/* Usable flash size, in bytes */
+	uint32_t flash_size;
+	/*
+	 * Write block size.  Write offset and size must be a multiple
+	 * of this.
+	 */
+	uint32_t write_block_size;
+	/*
+	 * Erase block size.  Erase offset and size must be a multiple
+	 * of this.
+	 */
+	uint32_t erase_block_size;
+	/*
+	 * Protection block size.  Protection offset and size must be a
+	 * multiple of this.
+	 */
+	uint32_t protect_block_size;
+} __packed;
+
+/*
+ * Read flash
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_FLASH_READ 0x11
+
+struct ec_params_flash_read {
+	uint32_t offset;   /* Byte offset to read */
+	uint32_t size;     /* Size to read in bytes */
+} __packed;
+
+/* Write flash */
+#define EC_CMD_FLASH_WRITE 0x12
+
+struct ec_params_flash_write {
+	uint32_t offset;   /* Byte offset to write */
+	uint32_t size;     /* Size to write in bytes */
+	/*
+	 * Data to write.  Could really use EC_PARAM_SIZE - 8, but tidiest to
+	 * use a power of 2 so writes stay aligned.
+	 */
+	uint8_t data[64];
+} __packed;
+
+/* Erase flash */
+#define EC_CMD_FLASH_ERASE 0x13
+
+struct ec_params_flash_erase {
+	uint32_t offset;   /* Byte offset to erase */
+	uint32_t size;     /* Size to erase in bytes */
+} __packed;
+
+/*
+ * Get/set flash protection.
+ *
+ * If mask!=0, sets/clear the requested bits of flags.  Depending on the
+ * firmware write protect GPIO, not all flags will take effect immediately;
+ * some flags require a subsequent hard reset to take effect.  Check the
+ * returned flags bits to see what actually happened.
+ *
+ * If mask=0, simply returns the current flags state.
+ */
+#define EC_CMD_FLASH_PROTECT 0x15
+#define EC_VER_FLASH_PROTECT 1  /* Command version 1 */
+
+/* Flags for flash protection */
+/* RO flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_RO_AT_BOOT         (1 << 0)
+/*
+ * RO flash code protected now.  If this bit is set, at-boot status cannot
+ * be changed.
+ */
+#define EC_FLASH_PROTECT_RO_NOW             (1 << 1)
+/* Entire flash code protected now, until reboot. */
+#define EC_FLASH_PROTECT_ALL_NOW            (1 << 2)
+/* Flash write protect GPIO is asserted now */
+#define EC_FLASH_PROTECT_GPIO_ASSERTED      (1 << 3)
+/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */
+#define EC_FLASH_PROTECT_ERROR_STUCK        (1 << 4)
+/*
+ * Error - flash protection is in inconsistent state.  At least one bank of
+ * flash which should be protected is not protected.  Usually fixed by
+ * re-requesting the desired flags, or by a hard reset if that fails.
+ */
+#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
+/* Entile flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_ALL_AT_BOOT        (1 << 6)
+
+struct ec_params_flash_protect {
+	uint32_t mask;   /* Bits in flags to apply */
+	uint32_t flags;  /* New flags to apply */
+} __packed;
+
+struct ec_response_flash_protect {
+	/* Current value of flash protect flags */
+	uint32_t flags;
+	/*
+	 * Flags which are valid on this platform.  This allows the caller
+	 * to distinguish between flags which aren't set vs. flags which can't
+	 * be set on this platform.
+	 */
+	uint32_t valid_flags;
+	/* Flags which can be changed given the current protection state */
+	uint32_t writable_flags;
+} __packed;
+
+/*
+ * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash
+ * write protect.  These commands may be reused with version > 0.
+ */
+
+/* Get the region offset/size */
+#define EC_CMD_FLASH_REGION_INFO 0x16
+#define EC_VER_FLASH_REGION_INFO 1
+
+enum ec_flash_region {
+	/* Region which holds read-only EC image */
+	EC_FLASH_REGION_RO,
+	/* Region which holds rewritable EC image */
+	EC_FLASH_REGION_RW,
+	/*
+	 * Region which should be write-protected in the factory (a superset of
+	 * EC_FLASH_REGION_RO)
+	 */
+	EC_FLASH_REGION_WP_RO,
+};
+
+struct ec_params_flash_region_info {
+	uint32_t region;  /* enum ec_flash_region */
+} __packed;
+
+struct ec_response_flash_region_info {
+	uint32_t offset;
+	uint32_t size;
+} __packed;
+
+/* Read/write VbNvContext */
+#define EC_CMD_VBNV_CONTEXT 0x17
+#define EC_VER_VBNV_CONTEXT 1
+#define EC_VBNV_BLOCK_SIZE 16
+
+enum ec_vbnvcontext_op {
+	EC_VBNV_CONTEXT_OP_READ,
+	EC_VBNV_CONTEXT_OP_WRITE,
+};
+
+struct ec_params_vbnvcontext {
+	uint32_t op;
+	uint8_t block[EC_VBNV_BLOCK_SIZE];
+} __packed;
+
+struct ec_response_vbnvcontext {
+	uint8_t block[EC_VBNV_BLOCK_SIZE];
+} __packed;
+
+/*****************************************************************************/
+/* PWM commands */
+
+/* Get fan target RPM */
+#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20
+
+struct ec_response_pwm_get_fan_rpm {
+	uint32_t rpm;
+} __packed;
+
+/* Set target fan RPM */
+#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21
+
+struct ec_params_pwm_set_fan_target_rpm {
+	uint32_t rpm;
+} __packed;
+
+/* Get keyboard backlight */
+#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
+
+struct ec_response_pwm_get_keyboard_backlight {
+	uint8_t percent;
+	uint8_t enabled;
+} __packed;
+
+/* Set keyboard backlight */
+#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
+
+struct ec_params_pwm_set_keyboard_backlight {
+	uint8_t percent;
+} __packed;
+
+/* Set target fan PWM duty cycle */
+#define EC_CMD_PWM_SET_FAN_DUTY 0x24
+
+struct ec_params_pwm_set_fan_duty {
+	uint32_t percent;
+} __packed;
+
+/*****************************************************************************/
+/*
+ * Lightbar commands. This looks worse than it is. Since we only use one HOST
+ * command to say "talk to the lightbar", we put the "and tell it to do X" part
+ * into a subcommand. We'll make separate structs for subcommands with
+ * different input args, so that we know how much to expect.
+ */
+#define EC_CMD_LIGHTBAR_CMD 0x28
+
+struct rgb_s {
+	uint8_t r, g, b;
+};
+
+#define LB_BATTERY_LEVELS 4
+/* List of tweakable parameters. NOTE: It's __packed so it can be sent in a
+ * host command, but the alignment is the same regardless. Keep it that way.
+ */
+struct lightbar_params {
+	/* Timing */
+	int google_ramp_up;
+	int google_ramp_down;
+	int s3s0_ramp_up;
+	int s0_tick_delay[2];			/* AC=0/1 */
+	int s0a_tick_delay[2];			/* AC=0/1 */
+	int s0s3_ramp_down;
+	int s3_sleep_for;
+	int s3_ramp_up;
+	int s3_ramp_down;
+
+	/* Oscillation */
+	uint8_t new_s0;
+	uint8_t osc_min[2];			/* AC=0/1 */
+	uint8_t osc_max[2];			/* AC=0/1 */
+	uint8_t w_ofs[2];			/* AC=0/1 */
+
+	/* Brightness limits based on the backlight and AC. */
+	uint8_t bright_bl_off_fixed[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_min[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_max[2];		/* AC=0/1 */
+
+	/* Battery level thresholds */
+	uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+
+	/* Map [AC][battery_level] to color index */
+	uint8_t s0_idx[2][LB_BATTERY_LEVELS];	/* AP is running */
+	uint8_t s3_idx[2][LB_BATTERY_LEVELS];	/* AP is sleeping */
+
+	/* Color palette */
+	struct rgb_s color[8];			/* 0-3 are Google colors */
+} __packed;
+
+struct ec_params_lightbar {
+	uint8_t cmd;		      /* Command (see enum lightbar_command) */
+	union {
+		struct {
+			/* no args */
+		} dump, off, on, init, get_seq, get_params;
+
+		struct num {
+			uint8_t num;
+		} brightness, seq, demo;
+
+		struct reg {
+			uint8_t ctrl, reg, value;
+		} reg;
+
+		struct rgb {
+			uint8_t led, red, green, blue;
+		} rgb;
+
+		struct lightbar_params set_params;
+	};
+} __packed;
+
+struct ec_response_lightbar {
+	union {
+		struct dump {
+			struct {
+				uint8_t reg;
+				uint8_t ic0;
+				uint8_t ic1;
+			} vals[23];
+		} dump;
+
+		struct get_seq {
+			uint8_t num;
+		} get_seq;
+
+		struct lightbar_params get_params;
+
+		struct {
+			/* no return params */
+		} off, on, init, brightness, seq, reg, rgb, demo, set_params;
+	};
+} __packed;
+
+/* Lightbar commands */
+enum lightbar_command {
+	LIGHTBAR_CMD_DUMP = 0,
+	LIGHTBAR_CMD_OFF = 1,
+	LIGHTBAR_CMD_ON = 2,
+	LIGHTBAR_CMD_INIT = 3,
+	LIGHTBAR_CMD_BRIGHTNESS = 4,
+	LIGHTBAR_CMD_SEQ = 5,
+	LIGHTBAR_CMD_REG = 6,
+	LIGHTBAR_CMD_RGB = 7,
+	LIGHTBAR_CMD_GET_SEQ = 8,
+	LIGHTBAR_CMD_DEMO = 9,
+	LIGHTBAR_CMD_GET_PARAMS = 10,
+	LIGHTBAR_CMD_SET_PARAMS = 11,
+	LIGHTBAR_NUM_CMDS
+};
+
+/*****************************************************************************/
+/* Verified boot commands */
+
+/*
+ * Note: command code 0x29 version 0 was VBOOT_CMD in Link EVT; it may be
+ * reused for other purposes with version > 0.
+ */
+
+/* Verified boot hash command */
+#define EC_CMD_VBOOT_HASH 0x2A
+
+struct ec_params_vboot_hash {
+	uint8_t cmd;             /* enum ec_vboot_hash_cmd */
+	uint8_t hash_type;       /* enum ec_vboot_hash_type */
+	uint8_t nonce_size;      /* Nonce size; may be 0 */
+	uint8_t reserved0;       /* Reserved; set 0 */
+	uint32_t offset;         /* Offset in flash to hash */
+	uint32_t size;           /* Number of bytes to hash */
+	uint8_t nonce_data[64];  /* Nonce data; ignored if nonce_size=0 */
+} __packed;
+
+struct ec_response_vboot_hash {
+	uint8_t status;          /* enum ec_vboot_hash_status */
+	uint8_t hash_type;       /* enum ec_vboot_hash_type */
+	uint8_t digest_size;     /* Size of hash digest in bytes */
+	uint8_t reserved0;       /* Ignore; will be 0 */
+	uint32_t offset;         /* Offset in flash which was hashed */
+	uint32_t size;           /* Number of bytes hashed */
+	uint8_t hash_digest[64]; /* Hash digest data */
+} __packed;
+
+enum ec_vboot_hash_cmd {
+	EC_VBOOT_HASH_GET = 0,       /* Get current hash status */
+	EC_VBOOT_HASH_ABORT = 1,     /* Abort calculating current hash */
+	EC_VBOOT_HASH_START = 2,     /* Start computing a new hash */
+	EC_VBOOT_HASH_RECALC = 3,    /* Synchronously compute a new hash */
+};
+
+enum ec_vboot_hash_type {
+	EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */
+};
+
+enum ec_vboot_hash_status {
+	EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */
+	EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */
+	EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */
+};
+
+/*
+ * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC.
+ * If one of these is specified, the EC will automatically update offset and
+ * size to the correct values for the specified image (RO or RW).
+ */
+#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe
+#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
+
+/*****************************************************************************/
+/* USB charging control commands */
+
+/* Set USB port charging mode */
+#define EC_CMD_USB_CHARGE_SET_MODE 0x30
+
+struct ec_params_usb_charge_set_mode {
+	uint8_t usb_port_id;
+	uint8_t mode;
+} __packed;
+
+/*****************************************************************************/
+/* Persistent storage for host */
+
+/* Maximum bytes that can be read/written in a single command */
+#define EC_PSTORE_SIZE_MAX 64
+
+/* Get persistent storage info */
+#define EC_CMD_PSTORE_INFO 0x40
+
+struct ec_response_pstore_info {
+	/* Persistent storage size, in bytes */
+	uint32_t pstore_size;
+	/* Access size; read/write offset and size must be a multiple of this */
+	uint32_t access_size;
+} __packed;
+
+/*
+ * Read persistent storage
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_PSTORE_READ 0x41
+
+struct ec_params_pstore_read {
+	uint32_t offset;   /* Byte offset to read */
+	uint32_t size;     /* Size to read in bytes */
+} __packed;
+
+/* Write persistent storage */
+#define EC_CMD_PSTORE_WRITE 0x42
+
+struct ec_params_pstore_write {
+	uint32_t offset;   /* Byte offset to write */
+	uint32_t size;     /* Size to write in bytes */
+	uint8_t data[EC_PSTORE_SIZE_MAX];
+} __packed;
+
+/*****************************************************************************/
+/* Real-time clock */
+
+/* RTC params and response structures */
+struct ec_params_rtc {
+	uint32_t time;
+} __packed;
+
+struct ec_response_rtc {
+	uint32_t time;
+} __packed;
+
+/* These use ec_response_rtc */
+#define EC_CMD_RTC_GET_VALUE 0x44
+#define EC_CMD_RTC_GET_ALARM 0x45
+
+/* These all use ec_params_rtc */
+#define EC_CMD_RTC_SET_VALUE 0x46
+#define EC_CMD_RTC_SET_ALARM 0x47
+
+/*****************************************************************************/
+/* Port80 log access */
+
+/* Get last port80 code from previous boot */
+#define EC_CMD_PORT80_LAST_BOOT 0x48
+
+struct ec_response_port80_last_boot {
+	uint16_t code;
+} __packed;
+
+/*****************************************************************************/
+/* Thermal engine commands */
+
+/* Set thershold value */
+#define EC_CMD_THERMAL_SET_THRESHOLD 0x50
+
+struct ec_params_thermal_set_threshold {
+	uint8_t sensor_type;
+	uint8_t threshold_id;
+	uint16_t value;
+} __packed;
+
+/* Get threshold value */
+#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
+
+struct ec_params_thermal_get_threshold {
+	uint8_t sensor_type;
+	uint8_t threshold_id;
+} __packed;
+
+struct ec_response_thermal_get_threshold {
+	uint16_t value;
+} __packed;
+
+/* Toggle automatic fan control */
+#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
+
+/* Get TMP006 calibration data */
+#define EC_CMD_TMP006_GET_CALIBRATION 0x53
+
+struct ec_params_tmp006_get_calibration {
+	uint8_t index;
+} __packed;
+
+struct ec_response_tmp006_get_calibration {
+	float s0;
+	float b0;
+	float b1;
+	float b2;
+} __packed;
+
+/* Set TMP006 calibration data */
+#define EC_CMD_TMP006_SET_CALIBRATION 0x54
+
+struct ec_params_tmp006_set_calibration {
+	uint8_t index;
+	uint8_t reserved[3];  /* Reserved; set 0 */
+	float s0;
+	float b0;
+	float b1;
+	float b2;
+} __packed;
+
+/*****************************************************************************/
+/* MKBP - Matrix KeyBoard Protocol */
+
+/*
+ * Read key state
+ *
+ * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for
+ * expected response size.
+ */
+#define EC_CMD_MKBP_STATE 0x60
+
+/* Provide information about the matrix : number of rows and columns */
+#define EC_CMD_MKBP_INFO 0x61
+
+struct ec_response_mkbp_info {
+	uint32_t rows;
+	uint32_t cols;
+	uint8_t switches;
+} __packed;
+
+/* Simulate key press */
+#define EC_CMD_MKBP_SIMULATE_KEY 0x62
+
+struct ec_params_mkbp_simulate_key {
+	uint8_t col;
+	uint8_t row;
+	uint8_t pressed;
+} __packed;
+
+/* Configure keyboard scanning */
+#define EC_CMD_MKBP_SET_CONFIG 0x64
+#define EC_CMD_MKBP_GET_CONFIG 0x65
+
+/* flags */
+enum mkbp_config_flags {
+	EC_MKBP_FLAGS_ENABLE = 1,	/* Enable keyboard scanning */
+};
+
+enum mkbp_config_valid {
+	EC_MKBP_VALID_SCAN_PERIOD		= 1 << 0,
+	EC_MKBP_VALID_POLL_TIMEOUT		= 1 << 1,
+	EC_MKBP_VALID_MIN_POST_SCAN_DELAY	= 1 << 3,
+	EC_MKBP_VALID_OUTPUT_SETTLE		= 1 << 4,
+	EC_MKBP_VALID_DEBOUNCE_DOWN		= 1 << 5,
+	EC_MKBP_VALID_DEBOUNCE_UP		= 1 << 6,
+	EC_MKBP_VALID_FIFO_MAX_DEPTH		= 1 << 7,
+};
+
+/* Configuration for our key scanning algorithm */
+struct ec_mkbp_config {
+	uint32_t valid_mask;		/* valid fields */
+	uint8_t flags;		/* some flags (enum mkbp_config_flags) */
+	uint8_t valid_flags;		/* which flags are valid */
+	uint16_t scan_period_us;	/* period between start of scans */
+	/* revert to interrupt mode after no activity for this long */
+	uint32_t poll_timeout_us;
+	/*
+	 * minimum post-scan relax time. Once we finish a scan we check
+	 * the time until we are due to start the next one. If this time is
+	 * shorter this field, we use this instead.
+	 */
+	uint16_t min_post_scan_delay_us;
+	/* delay between setting up output and waiting for it to settle */
+	uint16_t output_settle_us;
+	uint16_t debounce_down_us;	/* time for debounce on key down */
+	uint16_t debounce_up_us;	/* time for debounce on key up */
+	/* maximum depth to allow for fifo (0 = no keyscan output) */
+	uint8_t fifo_max_depth;
+} __packed;
+
+struct ec_params_mkbp_set_config {
+	struct ec_mkbp_config config;
+} __packed;
+
+struct ec_response_mkbp_get_config {
+	struct ec_mkbp_config config;
+} __packed;
+
+/* Run the key scan emulation */
+#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
+
+enum ec_keyscan_seq_cmd {
+	EC_KEYSCAN_SEQ_STATUS = 0,	/* Get status information */
+	EC_KEYSCAN_SEQ_CLEAR = 1,	/* Clear sequence */
+	EC_KEYSCAN_SEQ_ADD = 2,		/* Add item to sequence */
+	EC_KEYSCAN_SEQ_START = 3,	/* Start running sequence */
+	EC_KEYSCAN_SEQ_COLLECT = 4,	/* Collect sequence summary data */
+};
+
+enum ec_collect_flags {
+	/*
+	 * Indicates this scan was processed by the EC. Due to timing, some
+	 * scans may be skipped.
+	 */
+	EC_KEYSCAN_SEQ_FLAG_DONE	= 1 << 0,
+};
+
+struct ec_collect_item {
+	uint8_t flags;		/* some flags (enum ec_collect_flags) */
+};
+
+struct ec_params_keyscan_seq_ctrl {
+	uint8_t cmd;	/* Command to send (enum ec_keyscan_seq_cmd) */
+	union {
+		struct {
+			uint8_t active;		/* still active */
+			uint8_t num_items;	/* number of items */
+			/* Current item being presented */
+			uint8_t cur_item;
+		} status;
+		struct {
+			/*
+			 * Absolute time for this scan, measured from the
+			 * start of the sequence.
+			 */
+			uint32_t time_us;
+			uint8_t scan[0];	/* keyscan data */
+		} add;
+		struct {
+			uint8_t start_item;	/* First item to return */
+			uint8_t num_items;	/* Number of items to return */
+		} collect;
+	};
+} __packed;
+
+struct ec_result_keyscan_seq_ctrl {
+	union {
+		struct {
+			uint8_t num_items;	/* Number of items */
+			/* Data for each item */
+			struct ec_collect_item item[0];
+		} collect;
+	};
+} __packed;
+
+/*****************************************************************************/
+/* Temperature sensor commands */
+
+/* Read temperature sensor info */
+#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70
+
+struct ec_params_temp_sensor_get_info {
+	uint8_t id;
+} __packed;
+
+struct ec_response_temp_sensor_get_info {
+	char sensor_name[32];
+	uint8_t sensor_type;
+} __packed;
+
+/*****************************************************************************/
+
+/*
+ * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI
+ * commands accidentally sent to the wrong interface.  See the ACPI section
+ * below.
+ */
+
+/*****************************************************************************/
+/* Host event commands */
+
+/*
+ * Host event mask params and response structures, shared by all of the host
+ * event commands below.
+ */
+struct ec_params_host_event_mask {
+	uint32_t mask;
+} __packed;
+
+struct ec_response_host_event_mask {
+	uint32_t mask;
+} __packed;
+
+/* These all use ec_response_host_event_mask */
+#define EC_CMD_HOST_EVENT_GET_B         0x87
+#define EC_CMD_HOST_EVENT_GET_SMI_MASK  0x88
+#define EC_CMD_HOST_EVENT_GET_SCI_MASK  0x89
+#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d
+
+/* These all use ec_params_host_event_mask */
+#define EC_CMD_HOST_EVENT_SET_SMI_MASK  0x8a
+#define EC_CMD_HOST_EVENT_SET_SCI_MASK  0x8b
+#define EC_CMD_HOST_EVENT_CLEAR         0x8c
+#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e
+#define EC_CMD_HOST_EVENT_CLEAR_B       0x8f
+
+/*****************************************************************************/
+/* Switch commands */
+
+/* Enable/disable LCD backlight */
+#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90
+
+struct ec_params_switch_enable_backlight {
+	uint8_t enabled;
+} __packed;
+
+/* Enable/disable WLAN/Bluetooth */
+#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
+
+struct ec_params_switch_enable_wireless {
+	uint8_t enabled;
+} __packed;
+
+/*****************************************************************************/
+/* GPIO commands. Only available on EC if write protect has been disabled. */
+
+/* Set GPIO output value */
+#define EC_CMD_GPIO_SET 0x92
+
+struct ec_params_gpio_set {
+	char name[32];
+	uint8_t val;
+} __packed;
+
+/* Get GPIO value */
+#define EC_CMD_GPIO_GET 0x93
+
+struct ec_params_gpio_get {
+	char name[32];
+} __packed;
+struct ec_response_gpio_get {
+	uint8_t val;
+} __packed;
+
+/*****************************************************************************/
+/* I2C commands. Only available when flash write protect is unlocked. */
+
+/* Read I2C bus */
+#define EC_CMD_I2C_READ 0x94
+
+struct ec_params_i2c_read {
+	uint16_t addr;
+	uint8_t read_size; /* Either 8 or 16. */
+	uint8_t port;
+	uint8_t offset;
+} __packed;
+struct ec_response_i2c_read {
+	uint16_t data;
+} __packed;
+
+/* Write I2C bus */
+#define EC_CMD_I2C_WRITE 0x95
+
+struct ec_params_i2c_write {
+	uint16_t data;
+	uint16_t addr;
+	uint8_t write_size; /* Either 8 or 16. */
+	uint8_t port;
+	uint8_t offset;
+} __packed;
+
+/*****************************************************************************/
+/* Charge state commands. Only available when flash write protect unlocked. */
+
+/* Force charge state machine to stop in idle mode */
+#define EC_CMD_CHARGE_FORCE_IDLE 0x96
+
+struct ec_params_force_idle {
+	uint8_t enabled;
+} __packed;
+
+/*****************************************************************************/
+/* Console commands. Only available when flash write protect is unlocked. */
+
+/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
+#define EC_CMD_CONSOLE_SNAPSHOT 0x97
+
+/*
+ * Read next chunk of data from saved snapshot.
+ *
+ * Response is null-terminated string.  Empty string, if there is no more
+ * remaining output.
+ */
+#define EC_CMD_CONSOLE_READ 0x98
+
+/*****************************************************************************/
+
+/*
+ * Cut off battery power output if the battery supports.
+ *
+ * For unsupported battery, just don't implement this command and lets EC
+ * return EC_RES_INVALID_COMMAND.
+ */
+#define EC_CMD_BATTERY_CUT_OFF 0x99
+
+/*****************************************************************************/
+/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */
+
+/*
+ * Dump charge state machine context.
+ *
+ * Response is a binary dump of charge state machine context.
+ */
+#define EC_CMD_CHARGE_DUMP 0xa0
+
+/*
+ * Set maximum battery charging current.
+ */
+#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
+
+struct ec_params_current_limit {
+	uint32_t limit;
+} __packed;
+
+/*****************************************************************************/
+/* System commands */
+
+/*
+ * TODO: this is a confusing name, since it doesn't necessarily reboot the EC.
+ * Rename to "set image" or something similar.
+ */
+#define EC_CMD_REBOOT_EC 0xd2
+
+/* Command */
+enum ec_reboot_cmd {
+	EC_REBOOT_CANCEL = 0,        /* Cancel a pending reboot */
+	EC_REBOOT_JUMP_RO = 1,       /* Jump to RO without rebooting */
+	EC_REBOOT_JUMP_RW = 2,       /* Jump to RW without rebooting */
+	/* (command 3 was jump to RW-B) */
+	EC_REBOOT_COLD = 4,          /* Cold-reboot */
+	EC_REBOOT_DISABLE_JUMP = 5,  /* Disable jump until next reboot */
+	EC_REBOOT_HIBERNATE = 6      /* Hibernate EC */
+};
+
+/* Flags for ec_params_reboot_ec.reboot_flags */
+#define EC_REBOOT_FLAG_RESERVED0      (1 << 0)  /* Was recovery request */
+#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1)  /* Reboot after AP shutdown */
+
+struct ec_params_reboot_ec {
+	uint8_t cmd;           /* enum ec_reboot_cmd */
+	uint8_t flags;         /* See EC_REBOOT_FLAG_* */
+} __packed;
+
+/*
+ * Get information on last EC panic.
+ *
+ * Returns variable-length platform-dependent panic information.  See panic.h
+ * for details.
+ */
+#define EC_CMD_GET_PANIC_INFO 0xd3
+
+/*****************************************************************************/
+/*
+ * ACPI commands
+ *
+ * These are valid ONLY on the ACPI command/data port.
+ */
+
+/*
+ * ACPI Read Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ *    - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write address to EC_LPC_ADDR_ACPI_DATA
+ *    - Wait for EC_LPC_CMDR_DATA bit to set
+ *    - Read value from EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_READ 0x80
+
+/*
+ * ACPI Write Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ *    - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write address to EC_LPC_ADDR_ACPI_DATA
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write value to EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_WRITE 0x81
+
+/*
+ * ACPI Query Embedded Controller
+ *
+ * This clears the lowest-order bit in the currently pending host events, and
+ * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
+ * event 0x80000000 = 32), or 0 if no event was pending.
+ */
+#define EC_CMD_ACPI_QUERY_EVENT 0x84
+
+/* Valid addresses in ACPI memory space, for read/write commands */
+/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
+#define EC_ACPI_MEM_VERSION            0x00
+/*
+ * Test location; writing value here updates test compliment byte to (0xff -
+ * value).
+ */
+#define EC_ACPI_MEM_TEST               0x01
+/* Test compliment; writes here are ignored. */
+#define EC_ACPI_MEM_TEST_COMPLIMENT    0x02
+/* Keyboard backlight brightness percent (0 - 100) */
+#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
+
+/* Current version of ACPI memory address space */
+#define EC_ACPI_MEM_VERSION_CURRENT 1
+
+
+/*****************************************************************************/
+/*
+ * Special commands
+ *
+ * These do not follow the normal rules for commands.  See each command for
+ * details.
+ */
+
+/*
+ * Reboot NOW
+ *
+ * This command will work even when the EC LPC interface is busy, because the
+ * reboot command is processed at interrupt level.  Note that when the EC
+ * reboots, the host will reboot too, so there is no response to this command.
+ *
+ * Use EC_CMD_REBOOT_EC to reboot the EC more politely.
+ */
+#define EC_CMD_REBOOT 0xd1  /* Think "die" */
+
+/*
+ * Resend last response (not supported on LPC).
+ *
+ * Returns EC_RES_UNAVAILABLE if there is no response available - for example,
+ * there was no previous command, or the previous command's response was too
+ * big to save.
+ */
+#define EC_CMD_RESEND_RESPONSE 0xdb
+
+/*
+ * This header byte on a command indicate version 0. Any header byte less
+ * than this means that we are talking to an old EC which doesn't support
+ * versioning. In that case, we assume version 0.
+ *
+ * Header bytes greater than this indicate a later version. For example,
+ * EC_CMD_VERSION0 + 1 means we are using version 1.
+ *
+ * The old EC interface must not use commands 0dc or higher.
+ */
+#define EC_CMD_VERSION0 0xdc
+
+#endif  /* !__ACPI__ */
+
+#endif  /* __CROS_EC_COMMANDS_H */
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index ecddc5173c7c..8f21daf62fb5 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -1,9 +1,10 @@
 /*
  * TI Palmas
  *
- * Copyright 2011 Texas Instruments Inc.
+ * Copyright 2011-2013 Texas Instruments Inc.
  *
  * Author: Graeme Gregory <gg@slimlogic.co.uk>
+ * Author: Ian Lartey <ian@slimlogic.co.uk>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under  the terms of the GNU General  Public License as published by the
@@ -22,6 +23,15 @@
 
 #define PALMAS_NUM_CLIENTS		3
 
+/* The ID_REVISION NUMBERS */
+#define PALMAS_CHIP_OLD_ID		0x0000
+#define PALMAS_CHIP_ID			0xC035
+#define PALMAS_CHIP_CHARGER_ID		0xC036
+
+#define is_palmas(a)	(((a) == PALMAS_CHIP_OLD_ID) || \
+			((a) == PALMAS_CHIP_ID))
+#define is_palmas_charger(a) ((a) == PALMAS_CHIP_CHARGER_ID)
+
 struct palmas_pmic;
 struct palmas_gpadc;
 struct palmas_resource;
diff --git a/include/linux/mfd/retu.h b/include/linux/mfd/retu.h
index 1e2715d5b836..65471c4a3926 100644
--- a/include/linux/mfd/retu.h
+++ b/include/linux/mfd/retu.h
@@ -1,5 +1,5 @@
 /*
- * Retu MFD driver interface
+ * Retu/Tahvo MFD driver interface
  *
  * This file is subject to the terms and conditions of the GNU General
  * Public License. See the file "COPYING" in the main directory of this
@@ -19,4 +19,10 @@ int retu_write(struct retu_dev *, u8, u16);
 #define RETU_REG_CC1		0x0d		/* Common control register 1 */
 #define RETU_REG_STATUS		0x16		/* Status register */
 
+/* Interrupt sources */
+#define TAHVO_INT_VBUS		0		/* VBUS state */
+
+/* Interrupt status */
+#define TAHVO_STAT_VBUS		(1 << TAHVO_INT_VBUS)
+
 #endif /* __LINUX_MFD_RETU_H */
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 26ea7f1b7caf..86bc635f8385 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -500,6 +500,8 @@
 #define BPP_POWER_15_PERCENT_ON		0x08
 #define BPP_POWER_ON			0x00
 #define BPP_POWER_MASK			0x0F
+#define SD_VCC_PARTIAL_POWER_ON		0x02
+#define SD_VCC_POWER_ON			0x00
 
 /* PWR_GATE_CTRL */
 #define PWR_GATE_EN			0x01
@@ -689,6 +691,40 @@
 #define IMAGE_FLAG_ADDR0		0xCE80
 #define IMAGE_FLAG_ADDR1		0xCE81
 
+/* Phy register */
+#define PHY_PCR				0x00
+#define PHY_RCR0			0x01
+#define PHY_RCR1			0x02
+#define PHY_RCR2			0x03
+#define PHY_RTCR			0x04
+#define PHY_RDR				0x05
+#define PHY_TCR0			0x06
+#define PHY_TCR1			0x07
+#define PHY_TUNE			0x08
+#define PHY_IMR				0x09
+#define PHY_BPCR			0x0A
+#define PHY_BIST			0x0B
+#define PHY_RAW_L			0x0C
+#define PHY_RAW_H			0x0D
+#define PHY_RAW_DATA			0x0E
+#define PHY_HOST_CLK_CTRL		0x0F
+#define PHY_DMR				0x10
+#define PHY_BACR			0x11
+#define PHY_IER				0x12
+#define PHY_BCSR			0x13
+#define PHY_BPR				0x14
+#define PHY_BPNR2			0x15
+#define PHY_BPNR			0x16
+#define PHY_BRNR2			0x17
+#define PHY_BENR			0x18
+#define PHY_REG_REV			0x19
+#define PHY_FLD0			0x1A
+#define PHY_FLD1			0x1B
+#define PHY_FLD2			0x1C
+#define PHY_FLD3			0x1D
+#define PHY_FLD4			0x1E
+#define PHY_DUM_REG			0x1F
+
 #define rtsx_pci_init_cmd(pcr)		((pcr)->ci = 0)
 
 struct rtsx_pcr;
diff --git a/include/linux/mfd/si476x-core.h b/include/linux/mfd/si476x-core.h
new file mode 100644
index 000000000000..ba89b94e4a56
--- /dev/null
+++ b/include/linux/mfd/si476x-core.h
@@ -0,0 +1,533 @@
+/*
+ * include/media/si476x-core.h -- Common definitions for si476x core
+ * device
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef SI476X_CORE_H
+#define SI476X_CORE_H
+
+#include <linux/kfifo.h>
+#include <linux/atomic.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/videodev2.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/mfd/si476x-platform.h>
+#include <linux/mfd/si476x-reports.h>
+
+/* Command Timeouts */
+#define SI476X_DEFAULT_TIMEOUT	100000
+#define SI476X_TIMEOUT_TUNE	700000
+#define SI476X_TIMEOUT_POWER_UP	330000
+#define SI476X_STATUS_POLL_US	0
+
+/* -------------------- si476x-i2c.c ----------------------- */
+
+enum si476x_freq_supported_chips {
+	SI476X_CHIP_SI4761 = 1,
+	SI476X_CHIP_SI4764,
+	SI476X_CHIP_SI4768,
+};
+
+enum si476x_part_revisions {
+	SI476X_REVISION_A10 = 0,
+	SI476X_REVISION_A20 = 1,
+	SI476X_REVISION_A30 = 2,
+};
+
+enum si476x_mfd_cells {
+	SI476X_RADIO_CELL = 0,
+	SI476X_CODEC_CELL,
+	SI476X_MFD_CELLS,
+};
+
+/**
+ * enum si476x_power_state - possible power state of the si476x
+ * device.
+ *
+ * @SI476X_POWER_DOWN: In this state all regulators are turned off
+ * and the reset line is pulled low. The device is completely
+ * inactive.
+ * @SI476X_POWER_UP_FULL: In this state all the power regualtors are
+ * turned on, reset line pulled high, IRQ line is enabled(polling is
+ * active for polling use scenario) and device is turned on with
+ * POWER_UP command. The device is ready to be used.
+ * @SI476X_POWER_INCONSISTENT: This state indicates that previous
+ * power down was inconsistent, meaning some of the regulators were
+ * not turned down and thus use of the device, without power-cycling
+ * is impossible.
+ */
+enum si476x_power_state {
+	SI476X_POWER_DOWN		= 0,
+	SI476X_POWER_UP_FULL		= 1,
+	SI476X_POWER_INCONSISTENT	= 2,
+};
+
+/**
+ * struct si476x_core - internal data structure representing the
+ * underlying "core" device which all the MFD cell-devices use.
+ *
+ * @client: Actual I2C client used to transfer commands to the chip.
+ * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
+ * @cells: MFD cell devices created by this driver.
+ * @cmd_lock: Mutex used to serialize all the requests to the core
+ * device. This filed should not be used directly. Instead
+ * si476x_core_lock()/si476x_core_unlock() should be used to get
+ * exclusive access to the "core" device.
+ * @users: Active users counter(Used by the radio cell)
+ * @rds_read_queue: Wait queue used to wait for RDS data.
+ * @rds_fifo: FIFO in which all the RDS data received from the chip is
+ * placed.
+ * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
+ * @rds_drainer_is_working: Flag used for launching only one instance
+ * of the @rds_fifo_drainer.
+ * @rds_drainer_status_lock: Lock used to guard access to the
+ * @rds_drainer_is_working variable.
+ * @command: Wait queue for wainting on the command comapletion.
+ * @cts: Clear To Send flag set upon receiving first status with CTS
+ * set.
+ * @tuning: Wait queue used for wainting for tune/seek comand
+ * completion.
+ * @stc: Similar to @cts, but for the STC bit of the status value.
+ * @power_up_parameters: Parameters used as argument for POWER_UP
+ * command when the device is started.
+ * @state: Current power state of the device.
+ * @supplues: Structure containing handles to all power supplies used
+ * by the device (NULL ones are ignored).
+ * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
+ * @pinmux: Chip's configurable pins configuration.
+ * @diversity_mode: Chips role when functioning in diversity mode.
+ * @status_monitor: Polling worker used in polling use case scenarion
+ * (when IRQ is not avalible).
+ * @revision: Chip's running firmware revision number(Used for correct
+ * command set support).
+ */
+
+struct si476x_core {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	int chip_id;
+	struct mfd_cell cells[SI476X_MFD_CELLS];
+
+	struct mutex cmd_lock; /* for serializing fm radio operations */
+	atomic_t users;
+
+	wait_queue_head_t  rds_read_queue;
+	struct kfifo       rds_fifo;
+	struct work_struct rds_fifo_drainer;
+	bool               rds_drainer_is_working;
+	struct mutex       rds_drainer_status_lock;
+
+	wait_queue_head_t command;
+	atomic_t          cts;
+
+	wait_queue_head_t tuning;
+	atomic_t          stc;
+
+	struct si476x_power_up_args power_up_parameters;
+
+	enum si476x_power_state power_state;
+
+	struct regulator_bulk_data supplies[4];
+
+	int gpio_reset;
+
+	struct si476x_pinmux pinmux;
+	enum si476x_phase_diversity_mode diversity_mode;
+
+	atomic_t is_alive;
+
+	struct delayed_work status_monitor;
+#define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w),	\
+					    struct si476x_core,	\
+					    status_monitor)
+
+	int revision;
+
+	int rds_fifo_depth;
+};
+
+static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	return i2c_get_clientdata(client);
+}
+
+
+/**
+ * si476x_core_lock() - lock the core device to get an exclusive access
+ * to it.
+ */
+static inline void si476x_core_lock(struct si476x_core *core)
+{
+	mutex_lock(&core->cmd_lock);
+}
+
+/**
+ * si476x_core_unlock() - unlock the core device to relinquish an
+ * exclusive access to it.
+ */
+static inline void si476x_core_unlock(struct si476x_core *core)
+{
+	mutex_unlock(&core->cmd_lock);
+}
+
+/* *_TUNE_FREQ family of commands accept frequency in multiples of
+    10kHz */
+static inline u16 hz_to_si476x(struct si476x_core *core, int freq)
+{
+	u16 result;
+
+	switch (core->power_up_parameters.func) {
+	default:
+	case SI476X_FUNC_FM_RECEIVER:
+		result = freq / 10000;
+		break;
+	case SI476X_FUNC_AM_RECEIVER:
+		result = freq / 1000;
+		break;
+	}
+
+	return result;
+}
+
+static inline int si476x_to_hz(struct si476x_core *core, u16 freq)
+{
+	int result;
+
+	switch (core->power_up_parameters.func) {
+	default:
+	case SI476X_FUNC_FM_RECEIVER:
+		result = freq * 10000;
+		break;
+	case SI476X_FUNC_AM_RECEIVER:
+		result = freq * 1000;
+		break;
+	}
+
+	return result;
+}
+
+/* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
+ * mesures frequency in 62.5 Hz units */
+
+static inline int hz_to_v4l2(int freq)
+{
+	return (freq * 10) / 625;
+}
+
+static inline int v4l2_to_hz(int freq)
+{
+	return (freq * 625) / 10;
+}
+
+static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq)
+{
+	return hz_to_si476x(core, v4l2_to_hz(freq));
+}
+
+static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq)
+{
+	return hz_to_v4l2(si476x_to_hz(core, freq));
+}
+
+
+
+/**
+ * struct si476x_func_info - structure containing result of the
+ * FUNC_INFO command.
+ *
+ * @firmware.major: Firmware major number.
+ * @firmware.minor[...]: Firmware minor numbers.
+ * @patch_id:
+ * @func: Mode tuner is working in.
+ */
+struct si476x_func_info {
+	struct {
+		u8 major, minor[2];
+	} firmware;
+	u16 patch_id;
+	enum si476x_func func;
+};
+
+/**
+ * struct si476x_power_down_args - structure used to pass parameters
+ * to POWER_DOWN command
+ *
+ * @xosc: true - Power down, but leav oscillator running.
+ *        false - Full power down.
+ */
+struct si476x_power_down_args {
+	bool xosc;
+};
+
+/**
+ * enum si476x_tunemode - enum representing possible tune modes for
+ * the chip.
+ * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
+ * channel after tune, tune status is valid.
+ * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
+ * channel after tune, tune status invalid.
+ * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
+ * metric thresholds are not met.
+ * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
+ * previous channel.
+ */
+enum si476x_tunemode {
+	SI476X_TM_VALIDATED_NORMAL_TUNE = 0,
+	SI476X_TM_INVALIDATED_FAST_TUNE = 1,
+	SI476X_TM_VALIDATED_AF_TUNE     = 2,
+	SI476X_TM_VALIDATED_AF_CHECK    = 3,
+};
+
+/**
+ * enum si476x_smoothmetrics - enum containing the possible setting fo
+ * audio transitioning of the chip
+ * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
+ * new channel
+ * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
+ * channel values to the new values
+ */
+enum si476x_smoothmetrics {
+	SI476X_SM_INITIALIZE_AUDIO = 0,
+	SI476X_SM_TRANSITION_AUDIO = 1,
+};
+
+/**
+ * struct si476x_rds_status_report - the structure representing the
+ * response to 'FM_RD_STATUS' command
+ * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
+ * code has changed.
+ * @rdspiint: Program indentifiaction(PI) code has changed.
+ * @rdssyncint: RDS synchronization has changed.
+ * @rdsfifoint: RDS was received and the RDS FIFO has at least
+ * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
+ * @tpptyvalid: TP flag and PTY code are valid falg.
+ * @pivalid: PI code is valid flag.
+ * @rdssync: RDS is currently synchronized.
+ * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
+ * @tp: Current channel's TP flag.
+ * @pty: Current channel's PTY code.
+ * @pi: Current channel's PI code.
+ * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
+ * empty).
+ */
+struct si476x_rds_status_report {
+	bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint;
+	bool tpptyvalid, pivalid, rdssync, rdsfifolost;
+	bool tp;
+
+	u8 pty;
+	u16 pi;
+
+	u8 rdsfifoused;
+	u8 ble[4];
+
+	struct v4l2_rds_data rds[4];
+};
+
+struct si476x_rsq_status_args {
+	bool primary;
+	bool rsqack;
+	bool attune;
+	bool cancel;
+	bool stcack;
+};
+
+enum si476x_injside {
+	SI476X_INJSIDE_AUTO	= 0,
+	SI476X_INJSIDE_LOW	= 1,
+	SI476X_INJSIDE_HIGH	= 2,
+};
+
+struct si476x_tune_freq_args {
+	bool zifsr;
+	bool hd;
+	enum si476x_injside injside;
+	int freq;
+	enum si476x_tunemode tunemode;
+	enum si476x_smoothmetrics smoothmetrics;
+	int antcap;
+};
+
+int  si476x_core_stop(struct si476x_core *, bool);
+int  si476x_core_start(struct si476x_core *, bool);
+int  si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state);
+bool si476x_core_has_am(struct si476x_core *);
+bool si476x_core_has_diversity(struct si476x_core *);
+bool si476x_core_is_a_secondary_tuner(struct si476x_core *);
+bool si476x_core_is_a_primary_tuner(struct si476x_core *);
+bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core);
+bool si476x_core_is_powered_up(struct si476x_core *core);
+
+enum si476x_i2c_type {
+	SI476X_I2C_SEND,
+	SI476X_I2C_RECV
+};
+
+int si476x_core_i2c_xfer(struct si476x_core *,
+			 enum si476x_i2c_type,
+			 char *, int);
+
+
+/* -------------------- si476x-cmd.c ----------------------- */
+
+int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *);
+int si476x_core_cmd_set_property(struct si476x_core *, u16, u16);
+int si476x_core_cmd_get_property(struct si476x_core *, u16);
+int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *,
+				      enum si476x_dclk_config,
+				      enum si476x_dfs_config,
+				      enum si476x_dout_config,
+				      enum si476x_xout_config);
+int si476x_core_cmd_zif_pin_cfg(struct si476x_core *,
+				enum si476x_iqclk_config,
+				enum si476x_iqfs_config,
+				enum si476x_iout_config,
+				enum si476x_qout_config);
+int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *,
+					    enum si476x_icin_config,
+					    enum si476x_icip_config,
+					    enum si476x_icon_config,
+					    enum si476x_icop_config);
+int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *,
+				      enum si476x_lrout_config);
+int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config,
+				 enum si476x_a1_config);
+int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool);
+int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool);
+int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool,
+				  struct si476x_rds_status_report *);
+int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool,
+				      struct si476x_rds_blockcount_report *);
+int si476x_core_cmd_fm_tune_freq(struct si476x_core *,
+				 struct si476x_tune_freq_args *);
+int si476x_core_cmd_am_tune_freq(struct si476x_core *,
+				 struct si476x_tune_freq_args *);
+int si476x_core_cmd_am_rsq_status(struct si476x_core *,
+				  struct si476x_rsq_status_args *,
+				  struct si476x_rsq_status_report *);
+int si476x_core_cmd_fm_rsq_status(struct si476x_core *,
+				  struct si476x_rsq_status_args *,
+				  struct si476x_rsq_status_report *);
+int si476x_core_cmd_power_up(struct si476x_core *,
+			     struct si476x_power_up_args *);
+int si476x_core_cmd_power_down(struct si476x_core *,
+			       struct si476x_power_down_args *);
+int si476x_core_cmd_fm_phase_div_status(struct si476x_core *);
+int si476x_core_cmd_fm_phase_diversity(struct si476x_core *,
+				       enum si476x_phase_diversity_mode);
+
+int si476x_core_cmd_fm_acf_status(struct si476x_core *,
+				  struct si476x_acf_status_report *);
+int si476x_core_cmd_am_acf_status(struct si476x_core *,
+				  struct si476x_acf_status_report *);
+int si476x_core_cmd_agc_status(struct si476x_core *,
+			       struct si476x_agc_status_report *);
+
+enum si476x_power_grid_type {
+	SI476X_POWER_GRID_50HZ = 0,
+	SI476X_POWER_GRID_60HZ,
+};
+
+/* Properties  */
+
+enum si476x_interrupt_flags {
+	SI476X_STCIEN = (1 << 0),
+	SI476X_ACFIEN = (1 << 1),
+	SI476X_RDSIEN = (1 << 2),
+	SI476X_RSQIEN = (1 << 3),
+
+	SI476X_ERRIEN = (1 << 6),
+	SI476X_CTSIEN = (1 << 7),
+
+	SI476X_STCREP = (1 << 8),
+	SI476X_ACFREP = (1 << 9),
+	SI476X_RDSREP = (1 << 10),
+	SI476X_RSQREP = (1 << 11),
+};
+
+enum si476x_rdsint_sources {
+	SI476X_RDSTPPTY = (1 << 4),
+	SI476X_RDSPI    = (1 << 3),
+	SI476X_RDSSYNC	= (1 << 1),
+	SI476X_RDSRECV	= (1 << 0),
+};
+
+enum si476x_status_response_bits {
+	SI476X_CTS	  = (1 << 7),
+	SI476X_ERR	  = (1 << 6),
+	/* Status response for WB receiver */
+	SI476X_WB_ASQ_INT = (1 << 4),
+	SI476X_RSQ_INT    = (1 << 3),
+	/* Status response for FM receiver */
+	SI476X_FM_RDS_INT = (1 << 2),
+	SI476X_ACF_INT    = (1 << 1),
+	SI476X_STC_INT    = (1 << 0),
+};
+
+/* -------------------- si476x-prop.c ----------------------- */
+
+enum si476x_common_receiver_properties {
+	SI476X_PROP_INT_CTL_ENABLE			= 0x0000,
+	SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE	= 0x0200,
+	SI476X_PROP_DIGITAL_IO_INPUT_FORMAT		= 0x0201,
+	SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE	= 0x0202,
+	SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT		= 0x0203,
+
+	SI476X_PROP_SEEK_BAND_BOTTOM			= 0x1100,
+	SI476X_PROP_SEEK_BAND_TOP			= 0x1101,
+	SI476X_PROP_SEEK_FREQUENCY_SPACING		= 0x1102,
+
+	SI476X_PROP_VALID_MAX_TUNE_ERROR		= 0x2000,
+	SI476X_PROP_VALID_SNR_THRESHOLD			= 0x2003,
+	SI476X_PROP_VALID_RSSI_THRESHOLD		= 0x2004,
+};
+
+enum si476x_am_receiver_properties {
+	SI476X_PROP_AUDIO_PWR_LINE_FILTER		= 0x0303,
+};
+
+enum si476x_fm_receiver_properties {
+	SI476X_PROP_AUDIO_DEEMPHASIS			= 0x0302,
+
+	SI476X_PROP_FM_RDS_INTERRUPT_SOURCE		= 0x4000,
+	SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT		= 0x4001,
+	SI476X_PROP_FM_RDS_CONFIG			= 0x4002,
+};
+
+enum si476x_prop_audio_pwr_line_filter_bits {
+	SI476X_PROP_PWR_HARMONICS_MASK	= 0x001f,
+	SI476X_PROP_PWR_GRID_MASK	= 0x0100,
+	SI476X_PROP_PWR_ENABLE_MASK	= 0x0200,
+	SI476X_PROP_PWR_GRID_50HZ	= 0x0000,
+	SI476X_PROP_PWR_GRID_60HZ	= 0x0100,
+};
+
+enum si476x_prop_fm_rds_config_bits {
+	SI476X_PROP_RDSEN_MASK	= 0x1,
+	SI476X_PROP_RDSEN	= 0x1,
+};
+
+
+struct regmap *devm_regmap_init_si476x(struct si476x_core *);
+
+#endif	/* SI476X_CORE_H */
diff --git a/include/linux/mfd/si476x-platform.h b/include/linux/mfd/si476x-platform.h
new file mode 100644
index 000000000000..88bb93b7a9d5
--- /dev/null
+++ b/include/linux/mfd/si476x-platform.h
@@ -0,0 +1,267 @@
+/*
+ * include/media/si476x-platform.h -- Platform data specific definitions
+ *
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef __SI476X_PLATFORM_H__
+#define __SI476X_PLATFORM_H__
+
+/* It is possible to select one of the four adresses using pins A0
+ * and A1 on SI476x */
+#define SI476X_I2C_ADDR_1	0x60
+#define SI476X_I2C_ADDR_2	0x61
+#define SI476X_I2C_ADDR_3	0x62
+#define SI476X_I2C_ADDR_4	0x63
+
+enum si476x_iqclk_config {
+	SI476X_IQCLK_NOOP = 0,
+	SI476X_IQCLK_TRISTATE = 1,
+	SI476X_IQCLK_IQ = 21,
+};
+enum si476x_iqfs_config {
+	SI476X_IQFS_NOOP = 0,
+	SI476X_IQFS_TRISTATE = 1,
+	SI476X_IQFS_IQ = 21,
+};
+enum si476x_iout_config {
+	SI476X_IOUT_NOOP = 0,
+	SI476X_IOUT_TRISTATE = 1,
+	SI476X_IOUT_OUTPUT = 22,
+};
+enum si476x_qout_config {
+	SI476X_QOUT_NOOP = 0,
+	SI476X_QOUT_TRISTATE = 1,
+	SI476X_QOUT_OUTPUT = 22,
+};
+
+enum si476x_dclk_config {
+	SI476X_DCLK_NOOP      = 0,
+	SI476X_DCLK_TRISTATE  = 1,
+	SI476X_DCLK_DAUDIO    = 10,
+};
+
+enum si476x_dfs_config {
+	SI476X_DFS_NOOP      = 0,
+	SI476X_DFS_TRISTATE  = 1,
+	SI476X_DFS_DAUDIO    = 10,
+};
+
+enum si476x_dout_config {
+	SI476X_DOUT_NOOP       = 0,
+	SI476X_DOUT_TRISTATE   = 1,
+	SI476X_DOUT_I2S_OUTPUT = 12,
+	SI476X_DOUT_I2S_INPUT  = 13,
+};
+
+enum si476x_xout_config {
+	SI476X_XOUT_NOOP        = 0,
+	SI476X_XOUT_TRISTATE    = 1,
+	SI476X_XOUT_I2S_INPUT   = 13,
+	SI476X_XOUT_MODE_SELECT = 23,
+};
+
+enum si476x_icin_config {
+	SI476X_ICIN_NOOP	= 0,
+	SI476X_ICIN_TRISTATE	= 1,
+	SI476X_ICIN_GPO1_HIGH	= 2,
+	SI476X_ICIN_GPO1_LOW	= 3,
+	SI476X_ICIN_IC_LINK	= 30,
+};
+
+enum si476x_icip_config {
+	SI476X_ICIP_NOOP	= 0,
+	SI476X_ICIP_TRISTATE	= 1,
+	SI476X_ICIP_GPO2_HIGH	= 2,
+	SI476X_ICIP_GPO2_LOW	= 3,
+	SI476X_ICIP_IC_LINK	= 30,
+};
+
+enum si476x_icon_config {
+	SI476X_ICON_NOOP	= 0,
+	SI476X_ICON_TRISTATE	= 1,
+	SI476X_ICON_I2S		= 10,
+	SI476X_ICON_IC_LINK	= 30,
+};
+
+enum si476x_icop_config {
+	SI476X_ICOP_NOOP	= 0,
+	SI476X_ICOP_TRISTATE	= 1,
+	SI476X_ICOP_I2S		= 10,
+	SI476X_ICOP_IC_LINK	= 30,
+};
+
+
+enum si476x_lrout_config {
+	SI476X_LROUT_NOOP	= 0,
+	SI476X_LROUT_TRISTATE	= 1,
+	SI476X_LROUT_AUDIO	= 2,
+	SI476X_LROUT_MPX	= 3,
+};
+
+
+enum si476x_intb_config {
+	SI476X_INTB_NOOP     = 0,
+	SI476X_INTB_TRISTATE = 1,
+	SI476X_INTB_DAUDIO   = 10,
+	SI476X_INTB_IRQ      = 40,
+};
+
+enum si476x_a1_config {
+	SI476X_A1_NOOP     = 0,
+	SI476X_A1_TRISTATE = 1,
+	SI476X_A1_IRQ      = 40,
+};
+
+
+struct si476x_pinmux {
+	enum si476x_dclk_config  dclk;
+	enum si476x_dfs_config   dfs;
+	enum si476x_dout_config  dout;
+	enum si476x_xout_config  xout;
+
+	enum si476x_iqclk_config iqclk;
+	enum si476x_iqfs_config  iqfs;
+	enum si476x_iout_config  iout;
+	enum si476x_qout_config  qout;
+
+	enum si476x_icin_config  icin;
+	enum si476x_icip_config  icip;
+	enum si476x_icon_config  icon;
+	enum si476x_icop_config  icop;
+
+	enum si476x_lrout_config lrout;
+
+	enum si476x_intb_config  intb;
+	enum si476x_a1_config    a1;
+};
+
+enum si476x_ibias6x {
+	SI476X_IBIAS6X_OTHER			= 0,
+	SI476X_IBIAS6X_RCVR1_NON_4MHZ_CLK	= 1,
+};
+
+enum si476x_xstart {
+	SI476X_XSTART_MULTIPLE_TUNER	= 0x11,
+	SI476X_XSTART_NORMAL		= 0x77,
+};
+
+enum si476x_freq {
+	SI476X_FREQ_4_MHZ		= 0,
+	SI476X_FREQ_37P209375_MHZ	= 1,
+	SI476X_FREQ_36P4_MHZ		= 2,
+	SI476X_FREQ_37P8_MHZ		=  3,
+};
+
+enum si476x_xmode {
+	SI476X_XMODE_CRYSTAL_RCVR1	= 1,
+	SI476X_XMODE_EXT_CLOCK		= 2,
+	SI476X_XMODE_CRYSTAL_RCVR2_3	= 3,
+};
+
+enum si476x_xbiashc {
+	SI476X_XBIASHC_SINGLE_RECEIVER = 0,
+	SI476X_XBIASHC_MULTIPLE_RECEIVER = 1,
+};
+
+enum si476x_xbias {
+	SI476X_XBIAS_RCVR2_3	= 0,
+	SI476X_XBIAS_4MHZ_RCVR1 = 3,
+	SI476X_XBIAS_RCVR1	= 7,
+};
+
+enum si476x_func {
+	SI476X_FUNC_BOOTLOADER	= 0,
+	SI476X_FUNC_FM_RECEIVER = 1,
+	SI476X_FUNC_AM_RECEIVER = 2,
+	SI476X_FUNC_WB_RECEIVER = 3,
+};
+
+
+/**
+ * @xcload: Selects the amount of additional on-chip capacitance to
+ *          be connected between XTAL1 and gnd and between XTAL2 and
+ *          GND. One half of the capacitance value shown here is the
+ *          additional load capacitance presented to the xtal. The
+ *          minimum step size is 0.277 pF. Recommended value is 0x28
+ *          but it will be layout dependent. Range is 0–0x3F i.e.
+ *          (0–16.33 pF)
+ * @ctsien: enable CTSINT(interrupt request when CTS condition
+ *          arises) when set
+ * @intsel: when set A1 pin becomes the interrupt pin; otherwise,
+ *          INTB is the interrupt pin
+ * @func:   selects the boot function of the device. I.e.
+ *          SI476X_BOOTLOADER  - Boot loader
+ *          SI476X_FM_RECEIVER - FM receiver
+ *          SI476X_AM_RECEIVER - AM receiver
+ *          SI476X_WB_RECEIVER - Weatherband receiver
+ * @freq:   oscillator's crystal frequency:
+ *          SI476X_XTAL_37P209375_MHZ - 37.209375 Mhz
+ *          SI476X_XTAL_36P4_MHZ      - 36.4 Mhz
+ *          SI476X_XTAL_37P8_MHZ      - 37.8 Mhz
+ */
+struct si476x_power_up_args {
+	enum si476x_ibias6x ibias6x;
+	enum si476x_xstart  xstart;
+	u8   xcload;
+	bool fastboot;
+	enum si476x_xbiashc xbiashc;
+	enum si476x_xbias   xbias;
+	enum si476x_func    func;
+	enum si476x_freq    freq;
+	enum si476x_xmode   xmode;
+};
+
+
+/**
+ * enum si476x_phase_diversity_mode - possbile phase diversity modes
+ * for SI4764/5/6/7 chips.
+ *
+ * @SI476X_PHDIV_DISABLED:		Phase diversity feature is
+ *					disabled.
+ * @SI476X_PHDIV_PRIMARY_COMBINING:	Tuner works as a primary tuner
+ *					in combination with a
+ *					secondary one.
+ * @SI476X_PHDIV_PRIMARY_ANTENNA:	Tuner works as a primary tuner
+ *					using only its own antenna.
+ * @SI476X_PHDIV_SECONDARY_ANTENNA:	Tuner works as a primary tuner
+ *					usning seconary tuner's antenna.
+ * @SI476X_PHDIV_SECONDARY_COMBINING:	Tuner works as a secondary
+ *					tuner in combination with the
+ *					primary one.
+ */
+enum si476x_phase_diversity_mode {
+	SI476X_PHDIV_DISABLED			= 0,
+	SI476X_PHDIV_PRIMARY_COMBINING		= 1,
+	SI476X_PHDIV_PRIMARY_ANTENNA		= 2,
+	SI476X_PHDIV_SECONDARY_ANTENNA		= 3,
+	SI476X_PHDIV_SECONDARY_COMBINING	= 5,
+};
+
+
+/*
+ * Platform dependent definition
+ */
+struct si476x_platform_data {
+	int gpio_reset; /* < 0 if not used */
+
+	struct si476x_power_up_args power_up_parameters;
+	enum si476x_phase_diversity_mode diversity_mode;
+
+	struct si476x_pinmux pinmux;
+};
+
+
+#endif /* __SI476X_PLATFORM_H__ */
diff --git a/include/linux/mfd/si476x-reports.h b/include/linux/mfd/si476x-reports.h
new file mode 100644
index 000000000000..e0b9455a79c0
--- /dev/null
+++ b/include/linux/mfd/si476x-reports.h
@@ -0,0 +1,163 @@
+/*
+ * include/media/si476x-platform.h -- Definitions of the data formats
+ * returned by debugfs hooks
+ *
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef __SI476X_REPORTS_H__
+#define __SI476X_REPORTS_H__
+
+/**
+ * struct si476x_rsq_status - structure containing received signal
+ * quality
+ * @multhint:   Multipath Detect High.
+ *              true  - Indicatedes that the value is below
+ *                      FM_RSQ_MULTIPATH_HIGH_THRESHOLD
+ *              false - Indicatedes that the value is above
+ *                      FM_RSQ_MULTIPATH_HIGH_THRESHOLD
+ * @multlint:   Multipath Detect Low.
+ *              true  - Indicatedes that the value is below
+ *                      FM_RSQ_MULTIPATH_LOW_THRESHOLD
+ *              false - Indicatedes that the value is above
+ *                      FM_RSQ_MULTIPATH_LOW_THRESHOLD
+ * @snrhint:    SNR Detect High.
+ *              true  - Indicatedes that the value is below
+ *                      FM_RSQ_SNR_HIGH_THRESHOLD
+ *              false - Indicatedes that the value is above
+ *                      FM_RSQ_SNR_HIGH_THRESHOLD
+ * @snrlint:    SNR Detect Low.
+ *              true  - Indicatedes that the value is below
+ *                      FM_RSQ_SNR_LOW_THRESHOLD
+ *              false - Indicatedes that the value is above
+ *                      FM_RSQ_SNR_LOW_THRESHOLD
+ * @rssihint:   RSSI Detect High.
+ *              true  - Indicatedes that the value is below
+ *                      FM_RSQ_RSSI_HIGH_THRESHOLD
+ *              false - Indicatedes that the value is above
+ *                      FM_RSQ_RSSI_HIGH_THRESHOLD
+ * @rssilint:   RSSI Detect Low.
+ *              true  - Indicatedes that the value is below
+ *                      FM_RSQ_RSSI_LOW_THRESHOLD
+ *              false - Indicatedes that the value is above
+ *                      FM_RSQ_RSSI_LOW_THRESHOLD
+ * @bltf:       Band Limit.
+ *              Set if seek command hits the band limit or wrapped to
+ *              the original frequency.
+ * @snr_ready:  SNR measurement in progress.
+ * @rssiready:  RSSI measurement in progress.
+ * @afcrl:      Set if FREQOFF >= MAX_TUNE_ERROR
+ * @valid:      Set if the channel is valid
+ *               rssi < FM_VALID_RSSI_THRESHOLD
+ *               snr  < FM_VALID_SNR_THRESHOLD
+ *               tune_error < FM_VALID_MAX_TUNE_ERROR
+ * @readfreq:   Current tuned frequency.
+ * @freqoff:    Signed frequency offset.
+ * @rssi:       Received Signal Strength Indicator(dBuV).
+ * @snr:        RF SNR Indicator(dB).
+ * @lassi:
+ * @hassi:      Low/High side Adjacent(100 kHz) Channel Strength Indicator
+ * @mult:       Multipath indicator
+ * @dev:        Who knows? But values may vary.
+ * @readantcap: Antenna tuning capacity value.
+ * @assi:       Adjacent Channel(+/- 200kHz) Strength Indicator
+ * @usn:        Ultrasonic Noise Inticator in -DBFS
+ */
+struct si476x_rsq_status_report {
+	__u8 multhint, multlint;
+	__u8 snrhint,  snrlint;
+	__u8 rssihint, rssilint;
+	__u8 bltf;
+	__u8 snr_ready;
+	__u8 rssiready;
+	__u8 injside;
+	__u8 afcrl;
+	__u8 valid;
+
+	__u16 readfreq;
+	__s8  freqoff;
+	__s8  rssi;
+	__s8  snr;
+	__s8  issi;
+	__s8  lassi, hassi;
+	__s8  mult;
+	__u8  dev;
+	__u16 readantcap;
+	__s8  assi;
+	__s8  usn;
+
+	__u8 pilotdev;
+	__u8 rdsdev;
+	__u8 assidev;
+	__u8 strongdev;
+	__u16 rdspi;
+} __packed;
+
+/**
+ * si476x_acf_status_report - ACF report results
+ *
+ * @blend_int: If set, indicates that stereo separation has crossed
+ * below the blend threshold as set by FM_ACF_BLEND_THRESHOLD
+ * @hblend_int: If set, indicates that HiBlend cutoff frequency is
+ * lower than threshold as set by FM_ACF_HBLEND_THRESHOLD
+ * @hicut_int:  If set, indicates that HiCut cutoff frequency is lower
+ * than the threshold set by ACF_
+
+ */
+struct si476x_acf_status_report {
+	__u8 blend_int;
+	__u8 hblend_int;
+	__u8 hicut_int;
+	__u8 chbw_int;
+	__u8 softmute_int;
+	__u8 smute;
+	__u8 smattn;
+	__u8 chbw;
+	__u8 hicut;
+	__u8 hiblend;
+	__u8 pilot;
+	__u8 stblend;
+} __packed;
+
+enum si476x_fmagc {
+	SI476X_FMAGC_10K_OHM	= 0,
+	SI476X_FMAGC_800_OHM	= 1,
+	SI476X_FMAGC_400_OHM	= 2,
+	SI476X_FMAGC_200_OHM	= 4,
+	SI476X_FMAGC_100_OHM	= 8,
+	SI476X_FMAGC_50_OHM	= 16,
+	SI476X_FMAGC_25_OHM	= 32,
+	SI476X_FMAGC_12P5_OHM	= 64,
+	SI476X_FMAGC_6P25_OHM	= 128,
+};
+
+struct si476x_agc_status_report {
+	__u8 mxhi;
+	__u8 mxlo;
+	__u8 lnahi;
+	__u8 lnalo;
+	__u8 fmagc1;
+	__u8 fmagc2;
+	__u8 pgagain;
+	__u8 fmwblang;
+} __packed;
+
+struct si476x_rds_blockcount_report {
+	__u16 expected;
+	__u16 received;
+	__u16 uncorrectable;
+} __packed;
+
+#endif  /* __SI476X_REPORTS_H__ */
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 383ac1512a39..48395a69a7e9 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -26,6 +26,7 @@ enum stmpe_partnum {
 	STMPE801,
 	STMPE811,
 	STMPE1601,
+	STMPE1801,
 	STMPE2401,
 	STMPE2403,
 	STMPE_NBR_PARTS
@@ -39,6 +40,7 @@ enum {
 	STMPE_IDX_CHIP_ID,
 	STMPE_IDX_ICR_LSB,
 	STMPE_IDX_IER_LSB,
+	STMPE_IDX_ISR_LSB,
 	STMPE_IDX_ISR_MSB,
 	STMPE_IDX_GPMR_LSB,
 	STMPE_IDX_GPSR_LSB,
@@ -49,6 +51,7 @@ enum {
 	STMPE_IDX_GPFER_LSB,
 	STMPE_IDX_GPAFR_U_MSB,
 	STMPE_IDX_IEGPIOR_LSB,
+	STMPE_IDX_ISGPIOR_LSB,
 	STMPE_IDX_ISGPIOR_MSB,
 	STMPE_IDX_MAX,
 };
diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h
index 6aeb6b8da64d..b473577f36db 100644
--- a/include/linux/mfd/syscon.h
+++ b/include/linux/mfd/syscon.h
@@ -15,8 +15,11 @@
 #ifndef __LINUX_MFD_SYSCON_H__
 #define __LINUX_MFD_SYSCON_H__
 
+struct device_node;
+
 extern struct regmap *syscon_node_to_regmap(struct device_node *np);
 extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s);
+extern struct regmap *syscon_regmap_lookup_by_pdevname(const char *s);
 extern struct regmap *syscon_regmap_lookup_by_phandle(
 					struct device_node *np,
 					const char *property);
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 998628a2b08b..3f43069413e7 100644
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -27,6 +27,7 @@
 
 /* TPS65090 IRQs */
 enum {
+	TPS65090_IRQ_INTERRUPT,
 	TPS65090_IRQ_VAC_STATUS_CHANGE,
 	TPS65090_IRQ_VSYS_STATUS_CHANGE,
 	TPS65090_IRQ_BAT_STATUS_CHANGE,
diff --git a/include/linux/of.h b/include/linux/of.h
index fb2002f3c7dc..1b671c3809b8 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -356,6 +356,11 @@ static inline struct device_node *of_find_node_by_name(struct device_node *from,
 	return NULL;
 }
 
+static inline struct device_node *of_get_parent(const struct device_node *node)
+{
+	return NULL;
+}
+
 static inline bool of_have_populated_dt(void)
 {
 	return false;
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index d21b33c4c6ca..2e9ee4d1c676 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -83,15 +83,12 @@
 #define UCB_ID			0x7e
 #define UCB_ID_1400             0x4304
 
-struct ucb1400_gpio_data {
-	int gpio_offset;
-	int (*gpio_setup)(struct device *dev, int ngpio);
-	int (*gpio_teardown)(struct device *dev, int ngpio);
-};
-
 struct ucb1400_gpio {
 	struct gpio_chip	gc;
 	struct snd_ac97		*ac97;
+	int			gpio_offset;
+	int			(*gpio_setup)(struct device *dev, int ngpio);
+	int			(*gpio_teardown)(struct device *dev, int ngpio);
 };
 
 struct ucb1400_ts {
@@ -110,6 +107,9 @@ struct ucb1400 {
 
 struct ucb1400_pdata {
 	int	irq;
+	int	gpio_offset;
+	int	(*gpio_setup)(struct device *dev, int ngpio);
+	int	(*gpio_teardown)(struct device *dev, int ngpio);
 };
 
 static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
@@ -162,10 +162,4 @@ static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
 unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
 			      int adcsync);
 
-#ifdef CONFIG_GPIO_UCB1400
-void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data);
-#else
-static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {}
-#endif
-
 #endif