summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2014-01-15 14:22:35 +1100
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>2014-01-15 14:22:35 +1100
commitfac515db45207718168cb55ca4d0a390e43b61af (patch)
tree7dd2fe9b94f769a2009ff6c7402c52ef3dd3b640
parent3ac8ff1c475bda7174fce63230c0932454287cd5 (diff)
parentd064f30e5063ec54ab50af08c64fb5055e759bfd (diff)
Merge remote-tracking branch 'scott/next' into next
Freescale updates from Scott: << Highlights include 32-bit booke relocatable support, e6500 hardware tablewalk support, various e500 SPE fixes, some new/revived boards, and e6500 deeper idle and altivec powerdown modes. >>
-rw-r--r--Documentation/devicetree/bindings/video/ssd1289fb.txt13
-rw-r--r--arch/powerpc/Kconfig5
-rw-r--r--arch/powerpc/boot/Makefile7
-rw-r--r--arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi82
-rw-r--r--arch/powerpc/boot/dts/fsl/p1020si-post.dtsi3
-rw-r--r--arch/powerpc/boot/dts/fsl/p1021si-post.dtsi3
-rw-r--r--arch/powerpc/boot/dts/fsl/p1022si-post.dtsi3
-rw-r--r--arch/powerpc/boot/dts/fsl/p1023si-post.dtsi3
-rw-r--r--arch/powerpc/boot/dts/mvme5100.dts185
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pa.dts23
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pa.dtsi85
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pa_36b.dts (renamed from arch/powerpc/boot/dts/p1010rdb_36b.dts)47
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pb.dts35
-rw-r--r--arch/powerpc/boot/dts/p1010rdb-pb_36b.dts58
-rw-r--r--arch/powerpc/boot/dts/p1010rdb.dts66
-rw-r--r--arch/powerpc/boot/dts/p1010rdb.dtsi43
-rw-r--r--arch/powerpc/boot/dts/p1010rdb_32b.dtsi79
-rw-r--r--arch/powerpc/boot/dts/p1010rdb_36b.dtsi79
-rw-r--r--arch/powerpc/boot/dts/p1022ds.dtsi3
-rw-r--r--arch/powerpc/boot/dts/p1025twr.dts95
-rw-r--r--arch/powerpc/boot/dts/p1025twr.dtsi280
-rw-r--r--arch/powerpc/boot/mvme5100.c27
-rwxr-xr-xarch/powerpc/boot/wrapper4
-rw-r--r--arch/powerpc/configs/85xx/p1023_defconfig188
-rw-r--r--arch/powerpc/configs/adder875_defconfig1
-rw-r--r--arch/powerpc/configs/ep88xc_defconfig1
-rw-r--r--arch/powerpc/configs/mpc85xx_defconfig3
-rw-r--r--arch/powerpc/configs/mpc85xx_smp_defconfig3
-rw-r--r--arch/powerpc/configs/mpc866_ads_defconfig1
-rw-r--r--arch/powerpc/configs/mpc885_ads_defconfig1
-rw-r--r--arch/powerpc/configs/mvme5100_defconfig144
-rw-r--r--arch/powerpc/configs/tqm8xx_defconfig1
-rw-r--r--arch/powerpc/include/asm/fsl_lbc.h2
-rw-r--r--arch/powerpc/include/asm/kvm_asm.h1
-rw-r--r--arch/powerpc/include/asm/mmu-book3e.h13
-rw-r--r--arch/powerpc/include/asm/mmu.h21
-rw-r--r--arch/powerpc/include/asm/paca.h6
-rw-r--r--arch/powerpc/include/asm/ppc_asm.h13
-rw-r--r--arch/powerpc/include/asm/processor.h6
-rw-r--r--arch/powerpc/include/asm/reg.h2
-rw-r--r--arch/powerpc/include/asm/reg_booke.h10
-rw-r--r--arch/powerpc/kernel/asm-offsets.c9
-rw-r--r--arch/powerpc/kernel/cpu_setup_fsl_booke.S54
-rw-r--r--arch/powerpc/kernel/exceptions-64e.S27
-rw-r--r--arch/powerpc/kernel/fsl_booke_entry_mapping.S2
-rw-r--r--arch/powerpc/kernel/head_fsl_booke.S266
-rw-r--r--arch/powerpc/kernel/paca.c5
-rw-r--r--arch/powerpc/kernel/process.c30
-rw-r--r--arch/powerpc/kernel/prom.c41
-rw-r--r--arch/powerpc/kernel/setup_64.c31
-rw-r--r--arch/powerpc/kernel/swsusp_booke.S32
-rw-r--r--arch/powerpc/kernel/sysfs.c316
-rw-r--r--arch/powerpc/kvm/bookehv_interrupts.S2
-rw-r--r--arch/powerpc/math-emu/math_efp.c316
-rw-r--r--arch/powerpc/mm/fsl_booke_mmu.c80
-rw-r--r--arch/powerpc/mm/hugetlbpage-book3e.c54
-rw-r--r--arch/powerpc/mm/mem.c6
-rw-r--r--arch/powerpc/mm/mmu_decl.h2
-rw-r--r--arch/powerpc/mm/pgtable_32.c1
-rw-r--r--arch/powerpc/mm/pgtable_64.c12
-rw-r--r--arch/powerpc/mm/tlb_low_64e.S174
-rw-r--r--arch/powerpc/mm/tlb_nohash.c93
-rw-r--r--arch/powerpc/mm/tlb_nohash_low.S4
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig6
-rw-r--r--arch/powerpc/platforms/85xx/Makefile1
-rw-r--r--arch/powerpc/platforms/85xx/common.c38
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx.h6
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c29
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_rdb.c25
-rw-r--r--arch/powerpc/platforms/85xx/smp.c17
-rw-r--r--arch/powerpc/platforms/85xx/twr_p102x.c147
-rw-r--r--arch/powerpc/platforms/embedded6xx/Kconfig13
-rw-r--r--arch/powerpc/platforms/embedded6xx/Makefile1
-rw-r--r--arch/powerpc/platforms/embedded6xx/mvme5100.c221
-rw-r--r--arch/powerpc/sysdev/fsl_lbc.c31
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c3
-rw-r--r--arch/powerpc/sysdev/indirect_pci.c6
-rw-r--r--arch/powerpc/sysdev/mpic_timer.c10
-rw-r--r--drivers/tty/Kconfig2
-rw-r--r--include/linux/of_fdt.h1
-rw-r--r--include/math-emu/op-common.h9
81 files changed, 3154 insertions, 614 deletions
diff --git a/Documentation/devicetree/bindings/video/ssd1289fb.txt b/Documentation/devicetree/bindings/video/ssd1289fb.txt
new file mode 100644
index 000000000000..4fcd5e68cb6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ssd1289fb.txt
@@ -0,0 +1,13 @@
+* Solomon SSD1289 Framebuffer Driver
+
+Required properties:
+ - compatible: Should be "solomon,ssd1289fb". The only supported bus for
+ now is lbc.
+ - reg: Should contain address of the controller on the LBC bus. The detail
+ was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
+
+Examples:
+display@2,0 {
+ compatible = "solomon,ssd1289fb";
+ reg = <0x2 0x0000 0x0004>;
+};
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index f0a893142cee..fa395179ddd6 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -402,8 +402,7 @@ config KEXEC
config CRASH_DUMP
bool "Build a kdump crash kernel"
depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
- select RELOCATABLE if PPC64 || 44x
- select DYNAMIC_MEMSTART if FSL_BOOKE
+ select RELOCATABLE if PPC64 || 44x || FSL_BOOKE
help
Build a kernel suitable for use as a kdump capture kernel.
The same kernel binary can be used as production kernel and dump
@@ -884,7 +883,7 @@ config DYNAMIC_MEMSTART
config RELOCATABLE
bool "Build a relocatable kernel"
- depends on ADVANCED_OPTIONS && FLATMEM && 44x
+ depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE)
select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running at the
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index ca7f08cc4afd..90e9d9548660 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -71,9 +71,9 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
uartlite.c mpc52xx-psc.c
src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
-src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c
+src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c
src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
-src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
src-plat-y := of.c epapr.c
src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
@@ -95,7 +95,7 @@ src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
cuboot-c2k.c gamecube-head.S \
gamecube.c wii-head.S wii.c holly.c \
- prpmc2800.c
+ prpmc2800.c fixed-head.S mvme5100.c
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
@@ -286,6 +286,7 @@ image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
image-$(CONFIG_PPC_C2K) += cuImage.c2k
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
image-$(CONFIG_WII) += dtbImage.wii
+image-$(CONFIG_MVME5100) += dtbImage.mvme5100
# Board port in arch/powerpc/platform/amigaone/Kconfig
image-$(CONFIG_AMIGAONE) += cuImage.amigaone
diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi
new file mode 100644
index 000000000000..d3cc8d0f7c25
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma2: dma@102300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x102300 0x4>,
+ <0x102600 0x4>;
+ ranges = <0x0 0x102100 0x500>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ interrupts = <464 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ interrupts = <465 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ interrupts = <466 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ interrupts = <467 2 0 0>;
+ };
+ dma-channel@300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ interrupts = <468 2 0 0>;
+ };
+ dma-channel@380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ interrupts = <469 2 0 0>;
+ };
+ dma-channel@400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ interrupts = <470 2 0 0>;
+ };
+ dma-channel@480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ interrupts = <471 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
index 68cc5e7f6477..642dc3a83d0e 100644
--- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -36,7 +36,8 @@
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
- interrupts = <19 2 0 0>;
+ interrupts = <19 2 0 0>,
+ <16 2 0 0>;
};
/* controller at 0x9000 */
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
index adb82fd9057f..407cb5fd0f5b 100644
--- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -36,7 +36,8 @@
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
- interrupts = <19 2 0 0>;
+ interrupts = <19 2 0 0>,
+ <16 2 0 0>;
};
/* controller at 0x9000 */
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
index e179803a81ef..ebf202234549 100644
--- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -40,7 +40,8 @@
* pin muxing when the DIU is enabled.
*/
compatible = "fsl,p1022-elbc", "fsl,elbc";
- interrupts = <19 2 0 0>;
+ interrupts = <19 2 0 0>,
+ <16 2 0 0>;
};
/* controller at 0x9000 */
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
index f1105bffa915..81437fdf1db4 100644
--- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -36,7 +36,8 @@
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
- interrupts = <19 2 0 0>;
+ interrupts = <19 2 0 0>,
+ <16 2 0 0>;
};
/* controller at 0xa000 */
diff --git a/arch/powerpc/boot/dts/mvme5100.dts b/arch/powerpc/boot/dts/mvme5100.dts
new file mode 100644
index 000000000000..1ecb341a232a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mvme5100.dts
@@ -0,0 +1,185 @@
+/*
+ * Device Tree Source for Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MVME5100";
+ compatible = "MVME5100";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &serial0;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,7410 {
+ device_type = "cpu";
+ reg = <0x0>;
+ /* Following required by dtc but not used */
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ timebase-frequency = <25000000>;
+ clock-frequency = <500000000>;
+ bus-frequency = <100000000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ hawk@fef80000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "hawk-bridge", "simple-bus";
+ ranges = <0x0 0xfef80000 0x10000>;
+ reg = <0xfef80000 0x10000>;
+
+ serial0: serial@8000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x8000 0x80>;
+ reg-shift = <4>;
+ clock-frequency = <1843200>;
+ current-speed = <9600>;
+ interrupts = <1 1>; // IRQ1 Level Active Low.
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@8200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x8200 0x80>;
+ reg-shift = <4>;
+ clock-frequency = <1843200>;
+ current-speed = <9600>;
+ interrupts = <1 1>; // IRQ1 Level Active Low.
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: interrupt-controller@f3f80000 {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ device_type = "open-pic";
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ reg = <0xf3f80000 0x40000>;
+ };
+ };
+
+ pci0: pci@feff0000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "hawk-pci";
+ reg = <0xfec00000 0x400000>;
+ 8259-interrupt-acknowledge = <0xfeff0030>;
+ ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000
+ 0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ /*
+ * This definition (IDSEL 11) duplicates the
+ * interrupts definition in the i8259
+ * interrupt controller below.
+ *
+ * Do not change the interrupt sense/polarity from
+ * 0x2 to anything else, doing so will cause endless
+ * "spurious" i8259 interrupts to be fielded.
+ */
+ // IDSEL 11 - iPMC712 PCI/ISA Bridge
+ 0x5800 0x0 0x0 0x1 &mpic 0x0 0x2
+ 0x5800 0x0 0x0 0x2 &mpic 0x0 0x2
+ 0x5800 0x0 0x0 0x3 &mpic 0x0 0x2
+ 0x5800 0x0 0x0 0x4 &mpic 0x0 0x2
+
+ /* IDSEL 12 - Not Used */
+
+ /* IDSEL 13 - Universe VME Bridge */
+ 0x6800 0x0 0x0 0x1 &mpic 0x5 0x1
+ 0x6800 0x0 0x0 0x2 &mpic 0x6 0x1
+ 0x6800 0x0 0x0 0x3 &mpic 0x7 0x1
+ 0x6800 0x0 0x0 0x4 &mpic 0x8 0x1
+
+ /* IDSEL 14 - ENET 1 */
+ 0x7000 0x0 0x0 0x1 &mpic 0x2 0x1
+
+ /* IDSEL 15 - Not Used */
+
+ /* IDSEL 16 - PMC Slot 1 */
+ 0x8000 0x0 0x0 0x1 &mpic 0x9 0x1
+ 0x8000 0x0 0x0 0x2 &mpic 0xa 0x1
+ 0x8000 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0x8000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+ /* IDSEL 17 - PMC Slot 2 */
+ 0x8800 0x0 0x0 0x1 &mpic 0xc 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x9 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0xa 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0xb 0x1
+
+ /* IDSEL 18 - Not Used */
+
+ /* IDSEL 19 - ENET 2 */
+ 0x9800 0x0 0x0 0x1 &mpic 0xd 0x1
+
+ /* IDSEL 20 - PMCSPAN (PCI-X) */
+ 0xa000 0x0 0x0 0x1 &mpic 0x9 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0xa 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+ >;
+
+ isa {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "isa";
+ compatible = "isa";
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupts = <0 2>;
+ device_type = "interrupt-controller";
+ compatible = "chrp,iic";
+ interrupt-controller;
+ reg = <1 0x00000020 0x00000002
+ 1 0x000000a0 0x00000002
+ 1 0x000004d0 0x00000002>;
+ interrupt-parent = <&mpic>;
+ };
+
+ };
+
+ };
+
+ chosen {
+ linux,stdout-path = &serial0;
+ };
+
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/p1010rdb-pa.dts
new file mode 100644
index 000000000000..767d4c032857
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pa.dts
@@ -0,0 +1,23 @@
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB";
+ compatible = "fsl,P1010RDB";
+
+ /include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi
new file mode 100644
index 000000000000..434fb2d58575
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi
@@ -0,0 +1,85 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc_nand {
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND User area";
+ };
+};
+
+&phy0 {
+ interrupts = <1 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <4 1 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
index 64776f4a4651..3033371bc007 100644
--- a/arch/powerpc/boot/dts/p1010rdb_36b.dts
+++ b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
@@ -38,52 +38,9 @@
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
- memory {
- device_type = "memory";
- };
-
- board_ifc: ifc: ifc@fffe1e000 {
- /* NOR, NAND Flashes and CPLD on board */
- ranges = <0x0 0x0 0xf 0xee000000 0x02000000
- 0x1 0x0 0xf 0xff800000 0x00010000
- 0x3 0x0 0xf 0xffb00000 0x00000020>;
- reg = <0xf 0xffe1e000 0 0x2000>;
- };
-
- board_soc: soc: soc@fffe00000 {
- ranges = <0x0 0xf 0xffe00000 0x100000>;
- };
-
- pci0: pcie@fffe09000 {
- reg = <0xf 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@fffe0a000 {
- reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
+ /include/ "p1010rdb_36b.dtsi"
};
/include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/p1010rdb-pb.dts
new file mode 100644
index 000000000000..6eeb7d3185be
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pb.dts
@@ -0,0 +1,35 @@
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB-PB";
+ compatible = "fsl,P1010RDB-PB";
+
+ /include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+ interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <1 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
new file mode 100644
index 000000000000..7ab3c907b326
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
@@ -0,0 +1,58 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB-PB";
+ compatible = "fsl,P1010RDB-PB";
+
+ /include/ "p1010rdb_36b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+ interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <1 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
deleted file mode 100644
index b868d22984e9..000000000000
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * P1010 RDB Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1010si-pre.dtsi"
-
-/ {
- model = "fsl,P1010RDB";
- compatible = "fsl,P1010RDB";
-
- memory {
- device_type = "memory";
- };
-
- board_ifc: ifc: ifc@ffe1e000 {
- /* NOR, NAND Flashes and CPLD on board */
- ranges = <0x0 0x0 0x0 0xee000000 0x02000000
- 0x1 0x0 0x0 0xff800000 0x00010000
- 0x3 0x0 0x0 0xffb00000 0x00000020>;
- reg = <0x0 0xffe1e000 0 0x2000>;
- };
-
- board_soc: soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- };
-
- pci0: pcie@ffe09000 {
- reg = <0 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- reg = <0 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-};
-
-/include/ "p1010rdb.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index ec7c27a64671..ea534efa790d 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -69,49 +69,11 @@
};
};
- nand@1,0 {
+ ifc_nand: nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND Compressed RFS Image";
- };
-
- partition@a00000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00f00000>;
- label = "NAND JFFS2 Root File System";
- };
-
- partition@1900000 {
- /* 7MB for User Area */
- reg = <0x01900000 0x00700000>;
- label = "NAND User area";
- };
};
cpld@3,0 {
@@ -193,17 +155,14 @@
mdio@24000 {
phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
- interrupts = <2 1 0 0>;
reg = <0x0>;
};
phy2: ethernet-phy@2 {
- interrupts = <2 1 0 0>;
reg = <0x2>;
};
diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi
new file mode 100644
index 000000000000..fdc19aab2f70
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi
@@ -0,0 +1,79 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+memory {
+ device_type = "memory";
+};
+
+board_ifc: ifc: ifc@ffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+ 0x1 0x0 0x0 0xff800000 0x00010000
+ 0x3 0x0 0x0 0xffb00000 0x00000020>;
+ reg = <0x0 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+};
+
+pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
+
+pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi
new file mode 100644
index 000000000000..de2fceed4f79
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi
@@ -0,0 +1,79 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+memory {
+ device_type = "memory";
+};
+
+board_ifc: ifc: ifc@fffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+ 0x1 0x0 0xf 0xff800000 0x00010000
+ 0x3 0x0 0xf 0xffb00000 0x00000020>;
+ reg = <0xf 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+};
+
+pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
+
+pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi
index 873da350d01b..957e0dc1dc0f 100644
--- a/arch/powerpc/boot/dts/p1022ds.dtsi
+++ b/arch/powerpc/boot/dts/p1022ds.dtsi
@@ -146,8 +146,9 @@
*/
};
rtc@68 {
- compatible = "dallas,ds1339";
+ compatible = "dallas,ds3232";
reg = <0x68>;
+ interrupts = <0x1 0x1 0 0>;
};
adt7461@4c {
compatible = "adi,adt7461";
diff --git a/arch/powerpc/boot/dts/p1025twr.dts b/arch/powerpc/boot/dts/p1025twr.dts
new file mode 100644
index 000000000000..9036a4987905
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1025twr.dts
@@ -0,0 +1,95 @@
+/*
+ * P1025 TWR Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+ model = "fsl,P1025";
+ compatible = "fsl,TWR-P1025";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+
+ /* NOR Flash and SSD1289 */
+ ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+ 0x2 0x0 0x0 0xe0000000 0x00020000>;
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe09000 {
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ reg = <0 0xffe09000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ qe: qe@ffe80000 {
+ ranges = <0x0 0x0 0xffe80000 0x40000>;
+ reg = <0 0xffe80000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ };
+};
+
+/include/ "p1025twr.dtsi"
+/include/ "fsl/p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/p1025twr.dtsi
new file mode 100644
index 000000000000..8453501c256e
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1025twr.dtsi
@@ -0,0 +1,280 @@
+/*
+ * P1025 TWR Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/{
+ aliases {
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ };
+};
+
+&lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x4000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 5.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00580000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 56.75MB for Root file System */
+ reg = <0x00600000 0x038c0000>;
+ label = "NOR Root File System";
+ };
+
+ partition@ec0000 {
+ /* This location must not be altered */
+ /* 256KB for QE ucode firmware*/
+ reg = <0x03ec0000 0x00040000>;
+ label = "NOR QE microcode firmware";
+ read-only;
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x03f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ /* CS2 for Display */
+ display@2,0 {
+ compatible = "solomon,ssd1289fb";
+ reg = <0x2 0x0000 0x0004>;
+ };
+
+};
+
+&soc {
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <1 1 0 0>;
+ reg = <0x2>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ status = "disabled";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ par_io@e0100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xe0100 0x60>;
+ ranges = <0x0 0xe0100 0x60>;
+ device_type = "par_io";
+ num-ports = <3>;
+ pio1: ucc_pin@01 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
+ 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
+ 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
+ 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
+ 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
+ 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
+ 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
+ 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
+ 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
+ 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
+ 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
+ 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
+ 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
+ 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
+ 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
+ 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
+ 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
+ };
+
+ pio2: ucc_pin@02 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
+ 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
+ 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
+ 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
+ 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
+ 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
+ 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
+ 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
+ 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
+ };
+
+ pio3: ucc_pin@03 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/
+ 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/
+ 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/
+ 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/
+ 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/
+ };
+
+ pio4: ucc_pin@04 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/
+ 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/
+ 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/
+ 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/
+ 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/
+ };
+ };
+};
+
+&qe {
+ enet3: ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ rx-clock-name = "clk12";
+ tx-clock-name = "clk9";
+ pio-handle = <&pio1>;
+ phy-handle = <&qe_phy0>;
+ phy-connection-type = "mii";
+ };
+
+ mdio@2120 {
+ qe_phy0: ethernet-phy@18 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4 1 0 0>;
+ reg = <0x18>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy1: ethernet-phy@19 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1 0 0>;
+ reg = <0x19>;
+ device_type = "ethernet-phy";
+ };
+ tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet4: ucc@2400 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ rx-clock-name = "none";
+ tx-clock-name = "clk13";
+ pio-handle = <&pio2>;
+ phy-handle = <&qe_phy1>;
+ phy-connection-type = "rmii";
+ };
+
+ serial2: ucc@2600 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ port-number = <0>;
+ rx-clock-name = "brg6";
+ tx-clock-name = "brg6";
+ pio-handle = <&pio3>;
+ };
+
+ serial3: ucc@2200 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ port-number = <1>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ pio-handle = <&pio4>;
+ };
+};
diff --git a/arch/powerpc/boot/mvme5100.c b/arch/powerpc/boot/mvme5100.c
new file mode 100644
index 000000000000..cb865f83c60b
--- /dev/null
+++ b/arch/powerpc/boot/mvme5100.c
@@ -0,0 +1,27 @@
+/*
+ * Motorola/Emerson MVME5100 with PPCBug firmware.
+ *
+ * Author: Stephen Chivers <schivers@csc.com>
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+#include "types.h"
+#include "ops.h"
+#include "io.h"
+
+BSS_STACK(4096);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
+{
+ u32 heapsize;
+
+ heapsize = 0x8000000 - (u32)_end; /* 128M */
+ simple_alloc_init(_end, heapsize, 32, 64);
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 2e1af74a64be..d27a25518b01 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -265,6 +265,10 @@ epapr)
link_address='0x20000000'
pie=-pie
;;
+mvme5100)
+ platformo="$object/fixed-head.o $object/mvme5100.o"
+ binary=y
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
diff --git a/arch/powerpc/configs/85xx/p1023_defconfig b/arch/powerpc/configs/85xx/p1023_defconfig
deleted file mode 100644
index b06d37da44f4..000000000000
--- a/arch/powerpc/configs/85xx/p1023_defconfig
+++ /dev/null
@@ -1,188 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_RCU_FANOUT=32
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_P1023_RDB=y
-CONFIG_P1023_RDS=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_QE_GPIO=y
-CONFIG_CPM2=y
-CONFIG_HIGHMEM=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-CONFIG_SWIOTLB=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEAER is not set
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-CONFIG_INET_ESP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_ATA=y
-CONFIG_SATA_FSL=y
-CONFIG_SATA_SIL24=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_FS_ENET=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_E1000E=y
-CONFIG_PHYLIB=y
-CONFIG_AT803X_PHY=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_CPM=m
-CONFIG_I2C_MPC=y
-CONFIG_GPIO_MPC8XXX=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_STORAGE=y
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-# CONFIG_NET_DMA is not set
-CONFIG_STAGING=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FRAME_WARN=8092
-CONFIG_DEBUG_FS=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 69128740c14d..15b1ff5d96e7 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -70,3 +70,4 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_CRC32_SLICEBY4=y
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 219fd470ed22..b8a79d7ee89f 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -72,3 +72,4 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_CRC32_SLICEBY4=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index d2e0fab5ee5b..83d3550fdb54 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -31,6 +31,7 @@ CONFIG_C293_PCIE=y
CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y
+CONFIG_P1023_RDB=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
@@ -113,6 +114,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
@@ -211,6 +213,7 @@ CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
# CONFIG_NET_DMA is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 4cb7b59e98bd..4b686294feb4 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -34,6 +34,7 @@ CONFIG_C293_PCIE=y
CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y
+CONFIG_P1023_RDB=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
@@ -116,6 +117,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
@@ -212,6 +214,7 @@ CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
# CONFIG_NET_DMA is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 5c258823e694..d954e80c286a 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -55,3 +55,4 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_CRC_CCITT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC32_SLICEBY4=y
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 9e146cdf63de..3f47d00a10c0 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -78,3 +78,4 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_CRC32_SLICEBY4=y
diff --git a/arch/powerpc/configs/mvme5100_defconfig b/arch/powerpc/configs/mvme5100_defconfig
new file mode 100644
index 000000000000..93c7752e2dbb
--- /dev/null
+++ b/arch/powerpc/configs/mvme5100_defconfig
@@ -0,0 +1,144 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+CONFIG_EMBEDDED6xx=y
+CONFIG_MVME5100=y
+CONFIG_KVM_GUEST=y
+CONFIG_HZ_100=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPACTION is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,9600 ip=dhcp root=/dev/nfs"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_LAPB=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_EEPROM_LEGACY=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_E100=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=10
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MPC=y
+# CONFIG_HWMON is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_VME_BUS=m
+CONFIG_VME_CA91CX42=m
+CONFIG_EXT2_FS=m
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_XFS_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_CIFS=m
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/tqm8xx_defconfig b/arch/powerpc/configs/tqm8xx_defconfig
index 8616fde0896f..4b6f8bf104e0 100644
--- a/arch/powerpc/configs/tqm8xx_defconfig
+++ b/arch/powerpc/configs/tqm8xx_defconfig
@@ -84,3 +84,4 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_CRC32_SLICEBY4=y
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 420b45368fcf..067fb0dca549 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -285,7 +285,7 @@ struct fsl_lbc_ctrl {
/* device info */
struct device *dev;
struct fsl_lbc_regs __iomem *regs;
- int irq;
+ int irq[2];
wait_queue_head_t irq_wait;
spinlock_t lock;
void *nand;
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index 1bd92fd43cfb..1503d8c7c41b 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -74,6 +74,7 @@
#define BOOKE_INTERRUPT_GUEST_DBELL_CRIT 39
#define BOOKE_INTERRUPT_HV_SYSCALL 40
#define BOOKE_INTERRUPT_HV_PRIV 41
+#define BOOKE_INTERRUPT_LRAT_ERROR 42
/* book3s */
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 936db360790a..89b785d16846 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -286,8 +286,21 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
extern int mmu_linear_psize;
extern int mmu_vmemmap_psize;
+struct tlb_core_data {
+ /* For software way selection, as on Freescale TLB1 */
+ u8 esel_next, esel_max, esel_first;
+
+ /* Per-core spinlock for e6500 TLB handlers (no tlbsrx.) */
+ u8 lock;
+};
+
#ifdef CONFIG_PPC64
extern unsigned long linear_map_top;
+extern int book3e_htw_mode;
+
+#define PPC_HTW_NONE 0
+#define PPC_HTW_IBM 1
+#define PPC_HTW_E6500 2
/*
* 64-bit booke platforms don't load the tlb in the tlb miss handler code.
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 691fd8aca939..f8d1d6dcf7db 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -180,16 +180,17 @@ static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
#define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */
#define MMU_PAGE_256K 4
#define MMU_PAGE_1M 5
-#define MMU_PAGE_4M 6
-#define MMU_PAGE_8M 7
-#define MMU_PAGE_16M 8
-#define MMU_PAGE_64M 9
-#define MMU_PAGE_256M 10
-#define MMU_PAGE_1G 11
-#define MMU_PAGE_16G 12
-#define MMU_PAGE_64G 13
-
-#define MMU_PAGE_COUNT 14
+#define MMU_PAGE_2M 6
+#define MMU_PAGE_4M 7
+#define MMU_PAGE_8M 8
+#define MMU_PAGE_16M 9
+#define MMU_PAGE_64M 10
+#define MMU_PAGE_256M 11
+#define MMU_PAGE_1G 12
+#define MMU_PAGE_16G 13
+#define MMU_PAGE_64G 14
+
+#define MMU_PAGE_COUNT 15
#if defined(CONFIG_PPC_STD_MMU_64)
/* 64-bit classic hash table MMU */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 68bee4636045..9c5dbc3833fb 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -112,6 +112,10 @@ struct paca_struct {
/* Keep pgd in the same cacheline as the start of extlb */
pgd_t *pgd __attribute__((aligned(0x80))); /* Current PGD */
pgd_t *kernel_pgd; /* Kernel PGD */
+
+ /* Shared by all threads of a core -- points to tcd of first thread */
+ struct tlb_core_data *tcd_ptr;
+
/* We can have up to 3 levels of reentrancy in the TLB miss handler */
u64 extlb[3][EX_TLB_SIZE / sizeof(u64)];
u64 exmc[8]; /* used for machine checks */
@@ -122,6 +126,8 @@ struct paca_struct {
void *mc_kstack;
void *crit_kstack;
void *dbg_kstack;
+
+ struct tlb_core_data tcd;
#endif /* CONFIG_PPC_BOOK3E */
mm_context_t context;
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 7689e0e98d33..6586a40a46ce 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -294,6 +294,11 @@ n:
* you want to access various offsets within it). On ppc32 this is
* identical to LOAD_REG_IMMEDIATE.
*
+ * LOAD_REG_ADDR_PIC(rn, name)
+ * Loads the address of label 'name' into register 'run'. Use this when
+ * the kernel doesn't run at the linked or relocated address. Please
+ * note that this macro will clobber the lr register.
+ *
* LOAD_REG_ADDRBASE(rn, name)
* ADDROFF(name)
* LOAD_REG_ADDRBASE loads part of the address of label 'name' into
@@ -304,6 +309,14 @@ n:
* LOAD_REG_ADDRBASE(rX, name)
* ld rY,ADDROFF(name)(rX)
*/
+
+/* Be careful, this will clobber the lr register. */
+#define LOAD_REG_ADDR_PIC(reg, name) \
+ bl 0f; \
+0: mflr reg; \
+ addis reg,reg,(name - 0b)@ha; \
+ addi reg,reg,(name - 0b)@l;
+
#ifdef __powerpc64__
#define LOAD_REG_IMMEDIATE(reg,expr) \
lis reg,(expr)@highest; \
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 232a2fa5b483..8ca20ac28dc2 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -256,6 +256,8 @@ struct thread_struct {
unsigned long evr[32]; /* upper 32-bits of SPE regs */
u64 acc; /* Accumulator */
unsigned long spefscr; /* SPE & eFP status */
+ unsigned long spefscr_last; /* SPEFSCR value on last prctl
+ call or trap return */
int used_spe; /* set if process has used spe */
#endif /* CONFIG_SPE */
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -317,7 +319,9 @@ struct thread_struct {
(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
#ifdef CONFIG_SPE
-#define SPEFSCR_INIT .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,
+#define SPEFSCR_INIT \
+ .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, \
+ .spefscr_last = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,
#else
#define SPEFSCR_INIT
#endif
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index fa8388ed94c5..62b114e079cf 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1075,6 +1075,8 @@
#define PVR_8560 0x80200000
#define PVR_VER_E500V1 0x8020
#define PVR_VER_E500V2 0x8021
+#define PVR_VER_E6500 0x8040
+
/*
* For the 8xx processors, all of them report the same PVR family for
* the PowerPC core. The various versions of these processors must be
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 2e31aacd8acc..163c3b05a76e 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -101,6 +101,7 @@
#define SPRN_IVOR39 0x1B1 /* Interrupt Vector Offset Register 39 */
#define SPRN_IVOR40 0x1B2 /* Interrupt Vector Offset Register 40 */
#define SPRN_IVOR41 0x1B3 /* Interrupt Vector Offset Register 41 */
+#define SPRN_IVOR42 0x1B4 /* Interrupt Vector Offset Register 42 */
#define SPRN_GIVOR2 0x1B8 /* Guest IVOR2 */
#define SPRN_GIVOR3 0x1B9 /* Guest IVOR3 */
#define SPRN_GIVOR4 0x1BA /* Guest IVOR4 */
@@ -170,6 +171,7 @@
#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
+#define SPRN_PWRMGTCR0 0x3FB /* Power management control register 0 */
#define SPRN_SVR 0x3FF /* System Version Register */
/*
@@ -216,6 +218,14 @@
#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
#define CCR1_TCS 0x00000080 /* Timer Clock Select */
+/* Bit definitions for PWRMGTCR0. */
+#define PWRMGTCR0_PW20_WAIT (1 << 14) /* PW20 state enable bit */
+#define PWRMGTCR0_PW20_ENT_SHIFT 8
+#define PWRMGTCR0_PW20_ENT 0x3F00
+#define PWRMGTCR0_AV_IDLE_PD_EN (1 << 22) /* Altivec idle enable */
+#define PWRMGTCR0_AV_IDLE_CNT_SHIFT 16
+#define PWRMGTCR0_AV_IDLE_CNT 0x3F0000
+
/* Bit definitions for the MCSR. */
#define MCSR_MCS 0x80000000 /* Machine Check Summary */
#define MCSR_IB 0x40000000 /* Instruction PLB Error */
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 41a283956a29..ed8d68ce71f3 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -203,6 +203,15 @@ int main(void)
DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack));
DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack));
DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack));
+ DEFINE(PACA_TCD_PTR, offsetof(struct paca_struct, tcd_ptr));
+
+ DEFINE(TCD_ESEL_NEXT,
+ offsetof(struct tlb_core_data, esel_next));
+ DEFINE(TCD_ESEL_MAX,
+ offsetof(struct tlb_core_data, esel_max));
+ DEFINE(TCD_ESEL_FIRST,
+ offsetof(struct tlb_core_data, esel_first));
+ DEFINE(TCD_LOCK, offsetof(struct tlb_core_data, lock));
#endif /* CONFIG_PPC_BOOK3E */
#ifdef CONFIG_PPC_STD_MMU_64
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index bfb18c7290b7..cc2d8962e090 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -53,11 +53,57 @@ _GLOBAL(__e500_dcache_setup)
isync
blr
+/*
+ * FIXME - we haven't yet done testing to determine a reasonable default
+ * value for PW20_WAIT_IDLE_BIT.
+ */
+#define PW20_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */
+_GLOBAL(setup_pw20_idle)
+ mfspr r3, SPRN_PWRMGTCR0
+
+ /* Set PW20_WAIT bit, enable pw20 state*/
+ ori r3, r3, PWRMGTCR0_PW20_WAIT
+ li r11, PW20_WAIT_IDLE_BIT
+
+ /* Set Automatic PW20 Core Idle Count */
+ rlwimi r3, r11, PWRMGTCR0_PW20_ENT_SHIFT, PWRMGTCR0_PW20_ENT
+
+ mtspr SPRN_PWRMGTCR0, r3
+
+ blr
+
+/*
+ * FIXME - we haven't yet done testing to determine a reasonable default
+ * value for AV_WAIT_IDLE_BIT.
+ */
+#define AV_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */
+_GLOBAL(setup_altivec_idle)
+ mfspr r3, SPRN_PWRMGTCR0
+
+ /* Enable Altivec Idle */
+ oris r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h
+ li r11, AV_WAIT_IDLE_BIT
+
+ /* Set Automatic AltiVec Idle Count */
+ rlwimi r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT
+
+ mtspr SPRN_PWRMGTCR0, r3
+
+ blr
+
_GLOBAL(__setup_cpu_e6500)
mflr r6
#ifdef CONFIG_PPC64
bl .setup_altivec_ivors
+ /* Touch IVOR42 only if the CPU supports E.HV category */
+ mfspr r10,SPRN_MMUCFG
+ rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
+ beq 1f
+ bl .setup_lrat_ivor
+1:
#endif
+ bl setup_pw20_idle
+ bl setup_altivec_idle
bl __setup_cpu_e5500
mtlr r6
blr
@@ -119,6 +165,14 @@ _GLOBAL(__setup_cpu_e5500)
_GLOBAL(__restore_cpu_e6500)
mflr r5
bl .setup_altivec_ivors
+ /* Touch IVOR42 only if the CPU supports E.HV category */
+ mfspr r10,SPRN_MMUCFG
+ rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
+ beq 1f
+ bl .setup_lrat_ivor
+1:
+ bl .setup_pw20_idle
+ bl .setup_altivec_idle
bl __restore_cpu_e5500
mtlr r5
blr
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index e7751561fd1d..063b65dd4f27 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -308,6 +308,7 @@ interrupt_base_book3e: /* fake trap */
EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
EXCEPTION_STUB(0x300, hypercall)
EXCEPTION_STUB(0x320, ehpriv)
+ EXCEPTION_STUB(0x340, lrat_error)
.globl interrupt_end_book3e
interrupt_end_book3e:
@@ -677,6 +678,17 @@ kernel_dbg_exc:
bl .unknown_exception
b .ret_from_except
+/* LRAT Error interrupt */
+ START_EXCEPTION(lrat_error);
+ NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR,
+ PROLOG_ADDITION_NONE)
+ EXCEPTION_COMMON(0x340, PACA_EXGEN, INTS_KEEP)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .unknown_exception
+ b .ret_from_except
+
/*
* An interrupt came in while soft-disabled; We mark paca->irq_happened
* accordingly and if the interrupt is level sensitive, we hard disable
@@ -859,6 +871,7 @@ BAD_STACK_TRAMPOLINE(0x2e0)
BAD_STACK_TRAMPOLINE(0x300)
BAD_STACK_TRAMPOLINE(0x310)
BAD_STACK_TRAMPOLINE(0x320)
+BAD_STACK_TRAMPOLINE(0x340)
BAD_STACK_TRAMPOLINE(0x400)
BAD_STACK_TRAMPOLINE(0x500)
BAD_STACK_TRAMPOLINE(0x600)
@@ -1055,12 +1068,9 @@ skpinv: addi r6,r6,1 /* Increment */
mtspr SPRN_MAS0,r3
tlbre
mfspr r6,SPRN_MAS1
- rlwinm r6,r6,0,2,0 /* clear IPROT */
+ rlwinm r6,r6,0,2,31 /* clear IPROT and VALID */
mtspr SPRN_MAS1,r6
tlbwe
-
- /* Invalidate TLB1 */
- PPC_TLBILX_ALL(0,R0)
sync
isync
@@ -1114,12 +1124,9 @@ skpinv: addi r6,r6,1 /* Increment */
mtspr SPRN_MAS0,r4
tlbre
mfspr r5,SPRN_MAS1
- rlwinm r5,r5,0,2,0 /* clear IPROT */
+ rlwinm r5,r5,0,2,31 /* clear IPROT and VALID */
mtspr SPRN_MAS1,r5
tlbwe
-
- /* Invalidate TLB1 */
- PPC_TLBILX_ALL(0,R0)
sync
isync
@@ -1414,3 +1421,7 @@ _GLOBAL(setup_ehv_ivors)
SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
blr
+
+_GLOBAL(setup_lrat_ivor)
+ SET_IVOR(42, 0x340) /* LRAT Error */
+ blr
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
index a92c79be2728..f22e7e44fbf3 100644
--- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -176,6 +176,8 @@ skpinv: addi r6,r6,1 /* Increment */
/* 7. Jump to KERNELBASE mapping */
lis r6,(KERNELBASE & ~0xfff)@h
ori r6,r6,(KERNELBASE & ~0xfff)@l
+ rlwinm r7,r25,0,0x03ffffff
+ add r6,r7,r6
#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
/*
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index f45726a1d963..b497188a94a1 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -65,29 +65,78 @@ _ENTRY(_start);
nop
/* Translate device tree address to physical, save in r30/r31 */
- mfmsr r16
- mfspr r17,SPRN_PID
- rlwinm r17,r17,16,0x3fff0000 /* turn PID into MAS6[SPID] */
- rlwimi r17,r16,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */
- mtspr SPRN_MAS6,r17
-
- tlbsx 0,r3 /* must succeed */
-
- mfspr r16,SPRN_MAS1
- mfspr r20,SPRN_MAS3
- rlwinm r17,r16,25,0x1f /* r17 = log2(page size) */
- li r18,1024
- slw r18,r18,r17 /* r18 = page size */
- addi r18,r18,-1
- and r19,r3,r18 /* r19 = page offset */
- andc r31,r20,r18 /* r31 = page base */
- or r31,r31,r19 /* r31 = devtree phys addr */
- mfspr r30,SPRN_MAS7
+ bl get_phys_addr
+ mr r30,r3
+ mr r31,r4
li r25,0 /* phys kernel start (low) */
li r24,0 /* CPU number */
li r23,0 /* phys kernel start (high) */
+#ifdef CONFIG_RELOCATABLE
+ LOAD_REG_ADDR_PIC(r3, _stext) /* Get our current runtime base */
+
+ /* Translate _stext address to physical, save in r23/r25 */
+ bl get_phys_addr
+ mr r23,r3
+ mr r25,r4
+
+ bl 0f
+0: mflr r8
+ addis r3,r8,(is_second_reloc - 0b)@ha
+ lwz r19,(is_second_reloc - 0b)@l(r3)
+
+ /* Check if this is the second relocation. */
+ cmpwi r19,1
+ bne 1f
+
+ /*
+ * For the second relocation, we already get the real memstart_addr
+ * from device tree. So we will map PAGE_OFFSET to memstart_addr,
+ * then the virtual address of start kernel should be:
+ * PAGE_OFFSET + (kernstart_addr - memstart_addr)
+ * Since the offset between kernstart_addr and memstart_addr should
+ * never be beyond 1G, so we can just use the lower 32bit of them
+ * for the calculation.
+ */
+ lis r3,PAGE_OFFSET@h
+
+ addis r4,r8,(kernstart_addr - 0b)@ha
+ addi r4,r4,(kernstart_addr - 0b)@l
+ lwz r5,4(r4)
+
+ addis r6,r8,(memstart_addr - 0b)@ha
+ addi r6,r6,(memstart_addr - 0b)@l
+ lwz r7,4(r6)
+
+ subf r5,r7,r5
+ add r3,r3,r5
+ b 2f
+
+1:
+ /*
+ * We have the runtime (virutal) address of our base.
+ * We calculate our shift of offset from a 64M page.
+ * We could map the 64M page we belong to at PAGE_OFFSET and
+ * get going from there.
+ */
+ lis r4,KERNELBASE@h
+ ori r4,r4,KERNELBASE@l
+ rlwinm r6,r25,0,0x3ffffff /* r6 = PHYS_START % 64M */
+ rlwinm r5,r4,0,0x3ffffff /* r5 = KERNELBASE % 64M */
+ subf r3,r5,r6 /* r3 = r6 - r5 */
+ add r3,r4,r3 /* Required Virtual Address */
+
+2: bl relocate
+
+ /*
+ * For the second relocation, we already set the right tlb entries
+ * for the kernel space, so skip the code in fsl_booke_entry_mapping.S
+ */
+ cmpwi r19,1
+ beq set_ivor
+#endif
+
/* We try to not make any assumptions about how the boot loader
* setup or used the TLBs. We invalidate all mappings from the
* boot loader and load a single entry in TLB1[0] to map the
@@ -113,6 +162,7 @@ _ENTRY(__early_start)
#include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_BOOT_SETUP
+set_ivor:
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
SET_IVOR(1, MachineCheck);
@@ -166,8 +216,7 @@ _ENTRY(__early_start)
/* Check to see if we're the second processor, and jump
* to the secondary_start code if so
*/
- lis r24, boot_cpuid@h
- ori r24, r24, boot_cpuid@l
+ LOAD_REG_ADDR_PIC(r24, boot_cpuid)
lwz r24, 0(r24)
cmpwi r24, -1
mfspr r24,SPRN_PIR
@@ -197,6 +246,18 @@ _ENTRY(__early_start)
bl early_init
+#ifdef CONFIG_RELOCATABLE
+ mr r3,r30
+ mr r4,r31
+#ifdef CONFIG_PHYS_64BIT
+ mr r5,r23
+ mr r6,r25
+#else
+ mr r5,r25
+#endif
+ bl relocate_init
+#endif
+
#ifdef CONFIG_DYNAMIC_MEMSTART
lis r3,kernstart_addr@ha
la r3,kernstart_addr@l(r3)
@@ -856,6 +917,33 @@ KernelSPE:
#endif /* CONFIG_SPE */
/*
+ * Translate the effec addr in r3 to phys addr. The phys addr will be put
+ * into r3(higher 32bit) and r4(lower 32bit)
+ */
+get_phys_addr:
+ mfmsr r8
+ mfspr r9,SPRN_PID
+ rlwinm r9,r9,16,0x3fff0000 /* turn PID into MAS6[SPID] */
+ rlwimi r9,r8,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */
+ mtspr SPRN_MAS6,r9
+
+ tlbsx 0,r3 /* must succeed */
+
+ mfspr r8,SPRN_MAS1
+ mfspr r12,SPRN_MAS3
+ rlwinm r9,r8,25,0x1f /* r9 = log2(page size) */
+ li r10,1024
+ slw r10,r10,r9 /* r10 = page size */
+ addi r10,r10,-1
+ and r11,r3,r10 /* r11 = page offset */
+ andc r4,r12,r10 /* r4 = page base */
+ or r4,r4,r11 /* r4 = devtree phys addr */
+#ifdef CONFIG_PHYS_64BIT
+ mfspr r3,SPRN_MAS7
+#endif
+ blr
+
+/*
* Global functions
*/
@@ -1057,24 +1145,36 @@ _GLOBAL(__flush_disable_L1)
/* When we get here, r24 needs to hold the CPU # */
.globl __secondary_start
__secondary_start:
- lis r3,__secondary_hold_acknowledge@h
- ori r3,r3,__secondary_hold_acknowledge@l
- stw r24,0(r3)
-
- li r3,0
- mr r4,r24 /* Why? */
- bl call_setup_cpu
-
- lis r3,tlbcam_index@ha
- lwz r3,tlbcam_index@l(r3)
+ LOAD_REG_ADDR_PIC(r3, tlbcam_index)
+ lwz r3,0(r3)
mtctr r3
li r26,0 /* r26 safe? */
+ bl switch_to_as1
+ mr r27,r3 /* tlb entry */
/* Load each CAM entry */
1: mr r3,r26
bl loadcam_entry
addi r26,r26,1
bdnz 1b
+ mr r3,r27 /* tlb entry */
+ LOAD_REG_ADDR_PIC(r4, memstart_addr)
+ lwz r4,0(r4)
+ mr r5,r25 /* phys kernel start */
+ rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */
+ subf r4,r5,r4 /* memstart_addr - phys kernel start */
+ li r5,0 /* no device tree */
+ li r6,0 /* not boot cpu */
+ bl restore_to_as0
+
+
+ lis r3,__secondary_hold_acknowledge@h
+ ori r3,r3,__secondary_hold_acknowledge@l
+ stw r24,0(r3)
+
+ li r3,0
+ mr r4,r24 /* Why? */
+ bl call_setup_cpu
/* get current_thread_info and current */
lis r1,secondary_ti@ha
@@ -1111,6 +1211,112 @@ __secondary_hold_acknowledge:
#endif
/*
+ * Create a tlb entry with the same effective and physical address as
+ * the tlb entry used by the current running code. But set the TS to 1.
+ * Then switch to the address space 1. It will return with the r3 set to
+ * the ESEL of the new created tlb.
+ */
+_GLOBAL(switch_to_as1)
+ mflr r5
+
+ /* Find a entry not used */
+ mfspr r3,SPRN_TLB1CFG
+ andi. r3,r3,0xfff
+ mfspr r4,SPRN_PID
+ rlwinm r4,r4,16,0x3fff0000 /* turn PID into MAS6[SPID] */
+ mtspr SPRN_MAS6,r4
+1: lis r4,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ addi r3,r3,-1
+ rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r4
+ tlbre
+ mfspr r4,SPRN_MAS1
+ andis. r4,r4,MAS1_VALID@h
+ bne 1b
+
+ /* Get the tlb entry used by the current running code */
+ bl 0f
+0: mflr r4
+ tlbsx 0,r4
+
+ mfspr r4,SPRN_MAS1
+ ori r4,r4,MAS1_TS /* Set the TS = 1 */
+ mtspr SPRN_MAS1,r4
+
+ mfspr r4,SPRN_MAS0
+ rlwinm r4,r4,0,~MAS0_ESEL_MASK
+ rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r4
+ tlbwe
+ isync
+ sync
+
+ mfmsr r4
+ ori r4,r4,MSR_IS | MSR_DS
+ mtspr SPRN_SRR0,r5
+ mtspr SPRN_SRR1,r4
+ sync
+ rfi
+
+/*
+ * Restore to the address space 0 and also invalidate the tlb entry created
+ * by switch_to_as1.
+ * r3 - the tlb entry which should be invalidated
+ * r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0)
+ * r5 - device tree virtual address. If r4 is 0, r5 is ignored.
+ * r6 - boot cpu
+*/
+_GLOBAL(restore_to_as0)
+ mflr r0
+
+ bl 0f
+0: mflr r9
+ addi r9,r9,1f - 0b
+
+ /*
+ * We may map the PAGE_OFFSET in AS0 to a different physical address,
+ * so we need calculate the right jump and device tree address based
+ * on the offset passed by r4.
+ */
+ add r9,r9,r4
+ add r5,r5,r4
+ add r0,r0,r4
+
+2: mfmsr r7
+ li r8,(MSR_IS | MSR_DS)
+ andc r7,r7,r8
+
+ mtspr SPRN_SRR0,r9
+ mtspr SPRN_SRR1,r7
+ sync
+ rfi
+
+ /* Invalidate the temporary tlb entry for AS1 */
+1: lis r9,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r9,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r9
+ tlbre
+ mfspr r9,SPRN_MAS1
+ rlwinm r9,r9,0,2,31 /* Clear MAS1 Valid and IPPROT */
+ mtspr SPRN_MAS1,r9
+ tlbwe
+ isync
+
+ cmpwi r4,0
+ cmpwi cr1,r6,0
+ cror eq,4*cr1+eq,eq
+ bne 3f /* offset != 0 && is_boot_cpu */
+ mtlr r0
+ blr
+
+ /*
+ * The PAGE_OFFSET will map to a different physical address,
+ * jump to _start to do another relocation again.
+ */
+3: mr r3,r5
+ bl _start
+
+/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.
*/
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 623c356fe34f..bf0aada02fe4 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -160,6 +160,11 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
#ifdef CONFIG_PPC_STD_MMU_64
new_paca->slb_shadow_ptr = init_slb_shadow(cpu);
#endif /* CONFIG_PPC_STD_MMU_64 */
+
+#ifdef CONFIG_PPC_BOOK3E
+ /* For now -- if we have threads this will be adjusted later */
+ new_paca->tcd_ptr = &new_paca->tcd;
+#endif
}
/* Put the paca pointer into r13 and SPRG_PACA */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3573d186505f..5fc5906ec337 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1296,6 +1296,19 @@ int set_fpexc_mode(struct task_struct *tsk, unsigned int val)
if (val & PR_FP_EXC_SW_ENABLE) {
#ifdef CONFIG_SPE
if (cpu_has_feature(CPU_FTR_SPE)) {
+ /*
+ * When the sticky exception bits are set
+ * directly by userspace, it must call prctl
+ * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
+ * in the existing prctl settings) or
+ * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
+ * the bits being set). <fenv.h> functions
+ * saving and restoring the whole
+ * floating-point environment need to do so
+ * anyway to restore the prctl settings from
+ * the saved environment.
+ */
+ tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR);
tsk->thread.fpexc_mode = val &
(PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT);
return 0;
@@ -1327,9 +1340,22 @@ int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE)
#ifdef CONFIG_SPE
- if (cpu_has_feature(CPU_FTR_SPE))
+ if (cpu_has_feature(CPU_FTR_SPE)) {
+ /*
+ * When the sticky exception bits are set
+ * directly by userspace, it must call prctl
+ * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
+ * in the existing prctl settings) or
+ * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
+ * the bits being set). <fenv.h> functions
+ * saving and restoring the whole
+ * floating-point environment need to do so
+ * anyway to restore the prctl settings from
+ * the saved environment.
+ */
+ tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR);
val = tsk->thread.fpexc_mode;
- else
+ } else
return -EINVAL;
#else
return -EINVAL;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index fa0ad8aafbcc..f58c0d3aaeb4 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -523,6 +523,20 @@ static int __init early_init_dt_scan_memory_ppc(unsigned long node,
return early_init_dt_scan_memory(node, uname, depth, data);
}
+/*
+ * For a relocatable kernel, we need to get the memstart_addr first,
+ * then use it to calculate the virtual kernel start address. This has
+ * to happen at a very early stage (before machine_init). In this case,
+ * we just want to get the memstart_address and would not like to mess the
+ * memblock at this stage. So introduce a variable to skip the memblock_add()
+ * for this reason.
+ */
+#ifdef CONFIG_RELOCATABLE
+static int add_mem_to_memblock = 1;
+#else
+#define add_mem_to_memblock 1
+#endif
+
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
#ifdef CONFIG_PPC64
@@ -543,7 +557,8 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
}
/* Add the chunk to the MEMBLOCK list */
- memblock_add(base, size);
+ if (add_mem_to_memblock)
+ memblock_add(base, size);
}
static void __init early_reserve_mem_dt(void)
@@ -740,6 +755,30 @@ void __init early_init_devtree(void *params)
DBG(" <- early_init_devtree()\n");
}
+#ifdef CONFIG_RELOCATABLE
+/*
+ * This function run before early_init_devtree, so we have to init
+ * initial_boot_params.
+ */
+void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
+{
+ /* Setup flat device-tree pointer */
+ initial_boot_params = params;
+
+ /*
+ * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
+ * mess the memblock.
+ */
+ add_mem_to_memblock = 0;
+ of_scan_flat_dt(early_init_dt_scan_root, NULL);
+ of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
+ add_mem_to_memblock = 1;
+
+ if (size)
+ *size = first_memblock_size;
+}
+#endif
+
/*******
*
* New implementation of the OF "find" APIs, return a refcounted
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 2232aff66059..1ce9b87d7df8 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -97,6 +97,36 @@ int dcache_bsize;
int icache_bsize;
int ucache_bsize;
+#if defined(CONFIG_PPC_BOOK3E) && defined(CONFIG_SMP)
+static void setup_tlb_core_data(void)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ int first = cpu_first_thread_sibling(cpu);
+
+ paca[cpu].tcd_ptr = &paca[first].tcd;
+
+ /*
+ * If we have threads, we need either tlbsrx.
+ * or e6500 tablewalk mode, or else TLB handlers
+ * will be racy and could produce duplicate entries.
+ */
+ if (smt_enabled_at_boot >= 2 &&
+ !mmu_has_feature(MMU_FTR_USE_TLBRSRV) &&
+ book3e_htw_mode != PPC_HTW_E6500) {
+ /* Should we panic instead? */
+ WARN_ONCE("%s: unsupported MMU configuration -- expect problems\n",
+ __func__);
+ }
+ }
+}
+#else
+static void setup_tlb_core_data(void)
+{
+}
+#endif
+
#ifdef CONFIG_SMP
static char *smt_enabled_cmdline;
@@ -445,6 +475,7 @@ void __init setup_system(void)
smp_setup_cpu_maps();
check_smt_enabled();
+ setup_tlb_core_data();
#ifdef CONFIG_SMP
/* Release secondary cpus out of their spinloops at 0x60 now that
diff --git a/arch/powerpc/kernel/swsusp_booke.S b/arch/powerpc/kernel/swsusp_booke.S
index 0f204053e5b5..553c1405ee05 100644
--- a/arch/powerpc/kernel/swsusp_booke.S
+++ b/arch/powerpc/kernel/swsusp_booke.S
@@ -74,21 +74,21 @@ _GLOBAL(swsusp_arch_suspend)
bne 1b
/* Save SPRGs */
- mfsprg r4,0
+ mfspr r4,SPRN_SPRG0
stw r4,SL_SPRG0(r11)
- mfsprg r4,1
+ mfspr r4,SPRN_SPRG1
stw r4,SL_SPRG1(r11)
- mfsprg r4,2
+ mfspr r4,SPRN_SPRG2
stw r4,SL_SPRG2(r11)
- mfsprg r4,3
+ mfspr r4,SPRN_SPRG3
stw r4,SL_SPRG3(r11)
- mfsprg r4,4
+ mfspr r4,SPRN_SPRG4
stw r4,SL_SPRG4(r11)
- mfsprg r4,5
+ mfspr r4,SPRN_SPRG5
stw r4,SL_SPRG5(r11)
- mfsprg r4,6
+ mfspr r4,SPRN_SPRG6
stw r4,SL_SPRG6(r11)
- mfsprg r4,7
+ mfspr r4,SPRN_SPRG7
stw r4,SL_SPRG7(r11)
/* Call the low level suspend stuff (we should probably have made
@@ -150,21 +150,21 @@ _GLOBAL(swsusp_arch_resume)
bl _tlbil_all
lwz r4,SL_SPRG0(r11)
- mtsprg 0,r4
+ mtspr SPRN_SPRG0,r4
lwz r4,SL_SPRG1(r11)
- mtsprg 1,r4
+ mtspr SPRN_SPRG1,r4
lwz r4,SL_SPRG2(r11)
- mtsprg 2,r4
+ mtspr SPRN_SPRG2,r4
lwz r4,SL_SPRG3(r11)
- mtsprg 3,r4
+ mtspr SPRN_SPRG3,r4
lwz r4,SL_SPRG4(r11)
- mtsprg 4,r4
+ mtspr SPRN_SPRG4,r4
lwz r4,SL_SPRG5(r11)
- mtsprg 5,r4
+ mtspr SPRN_SPRG5,r4
lwz r4,SL_SPRG6(r11)
- mtsprg 6,r4
+ mtspr SPRN_SPRG6,r4
lwz r4,SL_SPRG7(r11)
- mtsprg 7,r4
+ mtspr SPRN_SPRG7,r4
/* restore the MSR */
lwz r3,SL_MSR(r11)
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index cad777eb613a..d4a43e64a6a9 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -86,6 +86,304 @@ __setup("smt-snooze-delay=", setup_smt_snooze_delay);
#endif /* CONFIG_PPC64 */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+#define MAX_BIT 63
+
+static u64 pw20_wt;
+static u64 altivec_idle_wt;
+
+static unsigned int get_idle_ticks_bit(u64 ns)
+{
+ u64 cycle;
+
+ if (ns >= 10000)
+ cycle = div_u64(ns + 500, 1000) * tb_ticks_per_usec;
+ else
+ cycle = div_u64(ns * tb_ticks_per_usec, 1000);
+
+ if (!cycle)
+ return 0;
+
+ return ilog2(cycle);
+}
+
+static void do_show_pwrmgtcr0(void *val)
+{
+ u32 *value = val;
+
+ *value = mfspr(SPRN_PWRMGTCR0);
+}
+
+static ssize_t show_pw20_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 value;
+ unsigned int cpu = dev->id;
+
+ smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+
+ value &= PWRMGTCR0_PW20_WAIT;
+
+ return sprintf(buf, "%u\n", value ? 1 : 0);
+}
+
+static void do_store_pw20_state(void *val)
+{
+ u32 *value = val;
+ u32 pw20_state;
+
+ pw20_state = mfspr(SPRN_PWRMGTCR0);
+
+ if (*value)
+ pw20_state |= PWRMGTCR0_PW20_WAIT;
+ else
+ pw20_state &= ~PWRMGTCR0_PW20_WAIT;
+
+ mtspr(SPRN_PWRMGTCR0, pw20_state);
+}
+
+static ssize_t store_pw20_state(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 value;
+ unsigned int cpu = dev->id;
+
+ if (kstrtou32(buf, 0, &value))
+ return -EINVAL;
+
+ if (value > 1)
+ return -EINVAL;
+
+ smp_call_function_single(cpu, do_store_pw20_state, &value, 1);
+
+ return count;
+}
+
+static ssize_t show_pw20_wait_time(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 value;
+ u64 tb_cycle = 1;
+ u64 time;
+
+ unsigned int cpu = dev->id;
+
+ if (!pw20_wt) {
+ smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+ value = (value & PWRMGTCR0_PW20_ENT) >>
+ PWRMGTCR0_PW20_ENT_SHIFT;
+
+ tb_cycle = (tb_cycle << (MAX_BIT - value + 1));
+ /* convert ms to ns */
+ if (tb_ticks_per_usec > 1000) {
+ time = div_u64(tb_cycle, tb_ticks_per_usec / 1000);
+ } else {
+ u32 rem_us;
+
+ time = div_u64_rem(tb_cycle, tb_ticks_per_usec,
+ &rem_us);
+ time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec;
+ }
+ } else {
+ time = pw20_wt;
+ }
+
+ return sprintf(buf, "%llu\n", time > 0 ? time : 0);
+}
+
+static void set_pw20_wait_entry_bit(void *val)
+{
+ u32 *value = val;
+ u32 pw20_idle;
+
+ pw20_idle = mfspr(SPRN_PWRMGTCR0);
+
+ /* Set Automatic PW20 Core Idle Count */
+ /* clear count */
+ pw20_idle &= ~PWRMGTCR0_PW20_ENT;
+
+ /* set count */
+ pw20_idle |= ((MAX_BIT - *value) << PWRMGTCR0_PW20_ENT_SHIFT);
+
+ mtspr(SPRN_PWRMGTCR0, pw20_idle);
+}
+
+static ssize_t store_pw20_wait_time(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 entry_bit;
+ u64 value;
+
+ unsigned int cpu = dev->id;
+
+ if (kstrtou64(buf, 0, &value))
+ return -EINVAL;
+
+ if (!value)
+ return -EINVAL;
+
+ entry_bit = get_idle_ticks_bit(value);
+ if (entry_bit > MAX_BIT)
+ return -EINVAL;
+
+ pw20_wt = value;
+
+ smp_call_function_single(cpu, set_pw20_wait_entry_bit,
+ &entry_bit, 1);
+
+ return count;
+}
+
+static ssize_t show_altivec_idle(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 value;
+ unsigned int cpu = dev->id;
+
+ smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+
+ value &= PWRMGTCR0_AV_IDLE_PD_EN;
+
+ return sprintf(buf, "%u\n", value ? 1 : 0);
+}
+
+static void do_store_altivec_idle(void *val)
+{
+ u32 *value = val;
+ u32 altivec_idle;
+
+ altivec_idle = mfspr(SPRN_PWRMGTCR0);
+
+ if (*value)
+ altivec_idle |= PWRMGTCR0_AV_IDLE_PD_EN;
+ else
+ altivec_idle &= ~PWRMGTCR0_AV_IDLE_PD_EN;
+
+ mtspr(SPRN_PWRMGTCR0, altivec_idle);
+}
+
+static ssize_t store_altivec_idle(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 value;
+ unsigned int cpu = dev->id;
+
+ if (kstrtou32(buf, 0, &value))
+ return -EINVAL;
+
+ if (value > 1)
+ return -EINVAL;
+
+ smp_call_function_single(cpu, do_store_altivec_idle, &value, 1);
+
+ return count;
+}
+
+static ssize_t show_altivec_idle_wait_time(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 value;
+ u64 tb_cycle = 1;
+ u64 time;
+
+ unsigned int cpu = dev->id;
+
+ if (!altivec_idle_wt) {
+ smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+ value = (value & PWRMGTCR0_AV_IDLE_CNT) >>
+ PWRMGTCR0_AV_IDLE_CNT_SHIFT;
+
+ tb_cycle = (tb_cycle << (MAX_BIT - value + 1));
+ /* convert ms to ns */
+ if (tb_ticks_per_usec > 1000) {
+ time = div_u64(tb_cycle, tb_ticks_per_usec / 1000);
+ } else {
+ u32 rem_us;
+
+ time = div_u64_rem(tb_cycle, tb_ticks_per_usec,
+ &rem_us);
+ time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec;
+ }
+ } else {
+ time = altivec_idle_wt;
+ }
+
+ return sprintf(buf, "%llu\n", time > 0 ? time : 0);
+}
+
+static void set_altivec_idle_wait_entry_bit(void *val)
+{
+ u32 *value = val;
+ u32 altivec_idle;
+
+ altivec_idle = mfspr(SPRN_PWRMGTCR0);
+
+ /* Set Automatic AltiVec Idle Count */
+ /* clear count */
+ altivec_idle &= ~PWRMGTCR0_AV_IDLE_CNT;
+
+ /* set count */
+ altivec_idle |= ((MAX_BIT - *value) << PWRMGTCR0_AV_IDLE_CNT_SHIFT);
+
+ mtspr(SPRN_PWRMGTCR0, altivec_idle);
+}
+
+static ssize_t store_altivec_idle_wait_time(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 entry_bit;
+ u64 value;
+
+ unsigned int cpu = dev->id;
+
+ if (kstrtou64(buf, 0, &value))
+ return -EINVAL;
+
+ if (!value)
+ return -EINVAL;
+
+ entry_bit = get_idle_ticks_bit(value);
+ if (entry_bit > MAX_BIT)
+ return -EINVAL;
+
+ altivec_idle_wt = value;
+
+ smp_call_function_single(cpu, set_altivec_idle_wait_entry_bit,
+ &entry_bit, 1);
+
+ return count;
+}
+
+/*
+ * Enable/Disable interface:
+ * 0, disable. 1, enable.
+ */
+static DEVICE_ATTR(pw20_state, 0600, show_pw20_state, store_pw20_state);
+static DEVICE_ATTR(altivec_idle, 0600, show_altivec_idle, store_altivec_idle);
+
+/*
+ * Set wait time interface:(Nanosecond)
+ * Example: Base on TBfreq is 41MHZ.
+ * 1~48(ns): TB[63]
+ * 49~97(ns): TB[62]
+ * 98~195(ns): TB[61]
+ * 196~390(ns): TB[60]
+ * 391~780(ns): TB[59]
+ * 781~1560(ns): TB[58]
+ * ...
+ */
+static DEVICE_ATTR(pw20_wait_time, 0600,
+ show_pw20_wait_time,
+ store_pw20_wait_time);
+static DEVICE_ATTR(altivec_idle_wait_time, 0600,
+ show_altivec_idle_wait_time,
+ store_altivec_idle_wait_time);
+#endif
+
/*
* Enabling PMCs will slow partition context switch times so we only do
* it the first time we write to the PMCs.
@@ -425,6 +723,15 @@ static void register_cpu_online(unsigned int cpu)
device_create_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
+ device_create_file(s, &dev_attr_pw20_state);
+ device_create_file(s, &dev_attr_pw20_wait_time);
+
+ device_create_file(s, &dev_attr_altivec_idle);
+ device_create_file(s, &dev_attr_altivec_idle_wait_time);
+ }
+#endif
cacheinfo_cpu_online(cpu);
}
@@ -497,6 +804,15 @@ static void unregister_cpu_online(unsigned int cpu)
device_remove_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
+ device_remove_file(s, &dev_attr_pw20_state);
+ device_remove_file(s, &dev_attr_pw20_wait_time);
+
+ device_remove_file(s, &dev_attr_altivec_idle);
+ device_remove_file(s, &dev_attr_altivec_idle_wait_time);
+ }
+#endif
cacheinfo_cpu_offline(cpu);
}
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index e8ed7d659c55..a0d6929d8678 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -319,6 +319,8 @@ kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(DBG), \
SPRN_DSRR0, SPRN_DSRR1, 0
kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(CRIT), \
SPRN_CSRR0, SPRN_CSRR1, 0
+kvm_handler BOOKE_INTERRUPT_LRAT_ERROR, EX_PARAMS(GEN), \
+ SPRN_SRR0, SPRN_SRR1, (NEED_EMU | NEED_DEAR | NEED_ESR)
#else
/*
* For input register values, see arch/powerpc/include/asm/kvm_booke_hv_asm.h
diff --git a/arch/powerpc/math-emu/math_efp.c b/arch/powerpc/math-emu/math_efp.c
index a73f0884d358..28337c9709ae 100644
--- a/arch/powerpc/math-emu/math_efp.c
+++ b/arch/powerpc/math-emu/math_efp.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/prctl.h>
#include <asm/uaccess.h>
#include <asm/reg.h>
@@ -275,21 +276,13 @@ int do_spe_mathemu(struct pt_regs *regs)
case EFSCTSF:
case EFSCTUF:
- if (!((vb.wp[1] >> 23) == 0xff && ((vb.wp[1] & 0x7fffff) > 0))) {
- /* NaN */
- if (((vb.wp[1] >> 23) & 0xff) == 0) {
- /* denorm */
- vc.wp[1] = 0x0;
- } else if ((vb.wp[1] >> 31) == 0) {
- /* positive normal */
- vc.wp[1] = (func == EFSCTSF) ?
- 0x7fffffff : 0xffffffff;
- } else { /* negative normal */
- vc.wp[1] = (func == EFSCTSF) ?
- 0x80000000 : 0x0;
- }
- } else { /* rB is NaN */
- vc.wp[1] = 0x0;
+ if (SB_c == FP_CLS_NAN) {
+ vc.wp[1] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ SB_e += (func == EFSCTSF ? 31 : 32);
+ FP_TO_INT_ROUND_S(vc.wp[1], SB, 32,
+ (func == EFSCTSF));
}
goto update_regs;
@@ -306,16 +299,25 @@ int do_spe_mathemu(struct pt_regs *regs)
}
case EFSCTSI:
- case EFSCTSIZ:
case EFSCTUI:
+ if (SB_c == FP_CLS_NAN) {
+ vc.wp[1] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ FP_TO_INT_ROUND_S(vc.wp[1], SB, 32,
+ ((func & 0x3) != 0));
+ }
+ goto update_regs;
+
+ case EFSCTSIZ:
case EFSCTUIZ:
- if (func & 0x4) {
- _FP_ROUND(1, SB);
+ if (SB_c == FP_CLS_NAN) {
+ vc.wp[1] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
} else {
- _FP_ROUND_ZERO(1, SB);
+ FP_TO_INT_S(vc.wp[1], SB, 32,
+ ((func & 0x3) != 0));
}
- FP_TO_INT_S(vc.wp[1], SB, 32,
- (((func & 0x3) != 0) || SB_s));
goto update_regs;
default:
@@ -404,22 +406,13 @@ cmp_s:
case EFDCTSF:
case EFDCTUF:
- if (!((vb.wp[0] >> 20) == 0x7ff &&
- ((vb.wp[0] & 0xfffff) > 0 || (vb.wp[1] > 0)))) {
- /* not a NaN */
- if (((vb.wp[0] >> 20) & 0x7ff) == 0) {
- /* denorm */
- vc.wp[1] = 0x0;
- } else if ((vb.wp[0] >> 31) == 0) {
- /* positive normal */
- vc.wp[1] = (func == EFDCTSF) ?
- 0x7fffffff : 0xffffffff;
- } else { /* negative normal */
- vc.wp[1] = (func == EFDCTSF) ?
- 0x80000000 : 0x0;
- }
- } else { /* NaN */
- vc.wp[1] = 0x0;
+ if (DB_c == FP_CLS_NAN) {
+ vc.wp[1] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ DB_e += (func == EFDCTSF ? 31 : 32);
+ FP_TO_INT_ROUND_D(vc.wp[1], DB, 32,
+ (func == EFDCTSF));
}
goto update_regs;
@@ -437,21 +430,35 @@ cmp_s:
case EFDCTUIDZ:
case EFDCTSIDZ:
- _FP_ROUND_ZERO(2, DB);
- FP_TO_INT_D(vc.dp[0], DB, 64, ((func & 0x1) == 0));
+ if (DB_c == FP_CLS_NAN) {
+ vc.dp[0] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ FP_TO_INT_D(vc.dp[0], DB, 64,
+ ((func & 0x1) == 0));
+ }
goto update_regs;
case EFDCTUI:
case EFDCTSI:
+ if (DB_c == FP_CLS_NAN) {
+ vc.wp[1] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ FP_TO_INT_ROUND_D(vc.wp[1], DB, 32,
+ ((func & 0x3) != 0));
+ }
+ goto update_regs;
+
case EFDCTUIZ:
case EFDCTSIZ:
- if (func & 0x4) {
- _FP_ROUND(2, DB);
+ if (DB_c == FP_CLS_NAN) {
+ vc.wp[1] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
} else {
- _FP_ROUND_ZERO(2, DB);
+ FP_TO_INT_D(vc.wp[1], DB, 32,
+ ((func & 0x3) != 0));
}
- FP_TO_INT_D(vc.wp[1], DB, 32,
- (((func & 0x3) != 0) || DB_s));
goto update_regs;
default:
@@ -556,37 +563,60 @@ cmp_d:
cmp = -1;
goto cmp_vs;
- case EVFSCTSF:
- __asm__ __volatile__ ("mtspr 512, %4\n"
- "efsctsf %0, %2\n"
- "efsctsf %1, %3\n"
- : "=r" (vc.wp[0]), "=r" (vc.wp[1])
- : "r" (vb.wp[0]), "r" (vb.wp[1]), "r" (0));
- goto update_regs;
-
case EVFSCTUF:
- __asm__ __volatile__ ("mtspr 512, %4\n"
- "efsctuf %0, %2\n"
- "efsctuf %1, %3\n"
- : "=r" (vc.wp[0]), "=r" (vc.wp[1])
- : "r" (vb.wp[0]), "r" (vb.wp[1]), "r" (0));
+ case EVFSCTSF:
+ if (SB0_c == FP_CLS_NAN) {
+ vc.wp[0] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ SB0_e += (func == EVFSCTSF ? 31 : 32);
+ FP_TO_INT_ROUND_S(vc.wp[0], SB0, 32,
+ (func == EVFSCTSF));
+ }
+ if (SB1_c == FP_CLS_NAN) {
+ vc.wp[1] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ SB1_e += (func == EVFSCTSF ? 31 : 32);
+ FP_TO_INT_ROUND_S(vc.wp[1], SB1, 32,
+ (func == EVFSCTSF));
+ }
goto update_regs;
case EVFSCTUI:
case EVFSCTSI:
+ if (SB0_c == FP_CLS_NAN) {
+ vc.wp[0] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ FP_TO_INT_ROUND_S(vc.wp[0], SB0, 32,
+ ((func & 0x3) != 0));
+ }
+ if (SB1_c == FP_CLS_NAN) {
+ vc.wp[1] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ FP_TO_INT_ROUND_S(vc.wp[1], SB1, 32,
+ ((func & 0x3) != 0));
+ }
+ goto update_regs;
+
case EVFSCTUIZ:
case EVFSCTSIZ:
- if (func & 0x4) {
- _FP_ROUND(1, SB0);
- _FP_ROUND(1, SB1);
+ if (SB0_c == FP_CLS_NAN) {
+ vc.wp[0] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
} else {
- _FP_ROUND_ZERO(1, SB0);
- _FP_ROUND_ZERO(1, SB1);
+ FP_TO_INT_S(vc.wp[0], SB0, 32,
+ ((func & 0x3) != 0));
+ }
+ if (SB1_c == FP_CLS_NAN) {
+ vc.wp[1] = 0;
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ } else {
+ FP_TO_INT_S(vc.wp[1], SB1, 32,
+ ((func & 0x3) != 0));
}
- FP_TO_INT_S(vc.wp[0], SB0, 32,
- (((func & 0x3) != 0) || SB0_s));
- FP_TO_INT_S(vc.wp[1], SB1, 32,
- (((func & 0x3) != 0) || SB1_s));
goto update_regs;
default:
@@ -630,9 +660,27 @@ update_ccr:
regs->ccr |= (IR << ((7 - ((speinsn >> 23) & 0x7)) << 2));
update_regs:
- __FPU_FPSCR &= ~FP_EX_MASK;
+ /*
+ * If the "invalid" exception sticky bit was set by the
+ * processor for non-finite input, but was not set before the
+ * instruction being emulated, clear it. Likewise for the
+ * "underflow" bit, which may have been set by the processor
+ * for exact underflow, not just inexact underflow when the
+ * flag should be set for IEEE 754 semantics. Other sticky
+ * exceptions will only be set by the processor when they are
+ * correct according to IEEE 754 semantics, and we must not
+ * clear sticky bits that were already set before the emulated
+ * instruction as they represent the user-visible sticky
+ * exception status. "inexact" traps to kernel are not
+ * required for IEEE semantics and are not enabled by default,
+ * so the "inexact" sticky bit may have been set by a previous
+ * instruction without the kernel being aware of it.
+ */
+ __FPU_FPSCR
+ &= ~(FP_EX_INVALID | FP_EX_UNDERFLOW) | current->thread.spefscr_last;
__FPU_FPSCR |= (FP_CUR_EXCEPTIONS & FP_EX_MASK);
mtspr(SPRN_SPEFSCR, __FPU_FPSCR);
+ current->thread.spefscr_last = __FPU_FPSCR;
current->thread.evr[fc] = vc.wp[0];
regs->gpr[fc] = vc.wp[1];
@@ -644,6 +692,23 @@ update_regs:
pr_debug("va: %08x %08x\n", va.wp[0], va.wp[1]);
pr_debug("vb: %08x %08x\n", vb.wp[0], vb.wp[1]);
+ if (current->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) {
+ if ((FP_CUR_EXCEPTIONS & FP_EX_DIVZERO)
+ && (current->thread.fpexc_mode & PR_FP_EXC_DIV))
+ return 1;
+ if ((FP_CUR_EXCEPTIONS & FP_EX_OVERFLOW)
+ && (current->thread.fpexc_mode & PR_FP_EXC_OVF))
+ return 1;
+ if ((FP_CUR_EXCEPTIONS & FP_EX_UNDERFLOW)
+ && (current->thread.fpexc_mode & PR_FP_EXC_UND))
+ return 1;
+ if ((FP_CUR_EXCEPTIONS & FP_EX_INEXACT)
+ && (current->thread.fpexc_mode & PR_FP_EXC_RES))
+ return 1;
+ if ((FP_CUR_EXCEPTIONS & FP_EX_INVALID)
+ && (current->thread.fpexc_mode & PR_FP_EXC_INV))
+ return 1;
+ }
return 0;
illegal:
@@ -662,21 +727,28 @@ int speround_handler(struct pt_regs *regs)
{
union dw_union fgpr;
int s_lo, s_hi;
- unsigned long speinsn, type, fc;
+ int lo_inexact, hi_inexact;
+ int fp_result;
+ unsigned long speinsn, type, fb, fc, fptype, func;
if (get_user(speinsn, (unsigned int __user *) regs->nip))
return -EFAULT;
if ((speinsn >> 26) != 4)
return -EINVAL; /* not an spe instruction */
- type = insn_type(speinsn & 0x7ff);
+ func = speinsn & 0x7ff;
+ type = insn_type(func);
if (type == XCR) return -ENOSYS;
__FPU_FPSCR = mfspr(SPRN_SPEFSCR);
pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
+ fptype = (speinsn >> 5) & 0x7;
+
/* No need to round if the result is exact */
- if (!(__FPU_FPSCR & FP_EX_INEXACT))
+ lo_inexact = __FPU_FPSCR & (SPEFSCR_FG | SPEFSCR_FX);
+ hi_inexact = __FPU_FPSCR & (SPEFSCR_FGH | SPEFSCR_FXH);
+ if (!(lo_inexact || (hi_inexact && fptype == VCT)))
return 0;
fc = (speinsn >> 21) & 0x1f;
@@ -685,9 +757,68 @@ int speround_handler(struct pt_regs *regs)
fgpr.wp[0] = current->thread.evr[fc];
fgpr.wp[1] = regs->gpr[fc];
+ fb = (speinsn >> 11) & 0x1f;
+ switch (func) {
+ case EFSCTUIZ:
+ case EFSCTSIZ:
+ case EVFSCTUIZ:
+ case EVFSCTSIZ:
+ case EFDCTUIDZ:
+ case EFDCTSIDZ:
+ case EFDCTUIZ:
+ case EFDCTSIZ:
+ /*
+ * These instructions always round to zero,
+ * independent of the rounding mode.
+ */
+ return 0;
+
+ case EFSCTUI:
+ case EFSCTUF:
+ case EVFSCTUI:
+ case EVFSCTUF:
+ case EFDCTUI:
+ case EFDCTUF:
+ fp_result = 0;
+ s_lo = 0;
+ s_hi = 0;
+ break;
+
+ case EFSCTSI:
+ case EFSCTSF:
+ fp_result = 0;
+ /* Recover the sign of a zero result if possible. */
+ if (fgpr.wp[1] == 0)
+ s_lo = regs->gpr[fb] & SIGN_BIT_S;
+ break;
+
+ case EVFSCTSI:
+ case EVFSCTSF:
+ fp_result = 0;
+ /* Recover the sign of a zero result if possible. */
+ if (fgpr.wp[1] == 0)
+ s_lo = regs->gpr[fb] & SIGN_BIT_S;
+ if (fgpr.wp[0] == 0)
+ s_hi = current->thread.evr[fb] & SIGN_BIT_S;
+ break;
+
+ case EFDCTSI:
+ case EFDCTSF:
+ fp_result = 0;
+ s_hi = s_lo;
+ /* Recover the sign of a zero result if possible. */
+ if (fgpr.wp[1] == 0)
+ s_hi = current->thread.evr[fb] & SIGN_BIT_S;
+ break;
+
+ default:
+ fp_result = 1;
+ break;
+ }
+
pr_debug("round fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]);
- switch ((speinsn >> 5) & 0x7) {
+ switch (fptype) {
/* Since SPE instructions on E500 core can handle round to nearest
* and round toward zero with IEEE-754 complied, we just need
* to handle round toward +Inf and round toward -Inf by software.
@@ -696,25 +827,52 @@ int speround_handler(struct pt_regs *regs)
if ((FP_ROUNDMODE) == FP_RND_PINF) {
if (!s_lo) fgpr.wp[1]++; /* Z > 0, choose Z1 */
} else { /* round to -Inf */
- if (s_lo) fgpr.wp[1]++; /* Z < 0, choose Z2 */
+ if (s_lo) {
+ if (fp_result)
+ fgpr.wp[1]++; /* Z < 0, choose Z2 */
+ else
+ fgpr.wp[1]--; /* Z < 0, choose Z2 */
+ }
}
break;
case DPFP:
if (FP_ROUNDMODE == FP_RND_PINF) {
- if (!s_hi) fgpr.dp[0]++; /* Z > 0, choose Z1 */
+ if (!s_hi) {
+ if (fp_result)
+ fgpr.dp[0]++; /* Z > 0, choose Z1 */
+ else
+ fgpr.wp[1]++; /* Z > 0, choose Z1 */
+ }
} else { /* round to -Inf */
- if (s_hi) fgpr.dp[0]++; /* Z < 0, choose Z2 */
+ if (s_hi) {
+ if (fp_result)
+ fgpr.dp[0]++; /* Z < 0, choose Z2 */
+ else
+ fgpr.wp[1]--; /* Z < 0, choose Z2 */
+ }
}
break;
case VCT:
if (FP_ROUNDMODE == FP_RND_PINF) {
- if (!s_lo) fgpr.wp[1]++; /* Z_low > 0, choose Z1 */
- if (!s_hi) fgpr.wp[0]++; /* Z_high word > 0, choose Z1 */
+ if (lo_inexact && !s_lo)
+ fgpr.wp[1]++; /* Z_low > 0, choose Z1 */
+ if (hi_inexact && !s_hi)
+ fgpr.wp[0]++; /* Z_high word > 0, choose Z1 */
} else { /* round to -Inf */
- if (s_lo) fgpr.wp[1]++; /* Z_low < 0, choose Z2 */
- if (s_hi) fgpr.wp[0]++; /* Z_high < 0, choose Z2 */
+ if (lo_inexact && s_lo) {
+ if (fp_result)
+ fgpr.wp[1]++; /* Z_low < 0, choose Z2 */
+ else
+ fgpr.wp[1]--; /* Z_low < 0, choose Z2 */
+ }
+ if (hi_inexact && s_hi) {
+ if (fp_result)
+ fgpr.wp[0]++; /* Z_high < 0, choose Z2 */
+ else
+ fgpr.wp[0]--; /* Z_high < 0, choose Z2 */
+ }
}
break;
@@ -727,6 +885,8 @@ int speround_handler(struct pt_regs *regs)
pr_debug(" to fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]);
+ if (current->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE)
+ return (current->thread.fpexc_mode & PR_FP_EXC_RES) ? 1 : 0;
return 0;
}
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index 07ba45b0f07c..94cd728166d3 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -52,6 +52,7 @@
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/setup.h>
+#include <asm/paca.h>
#include "mmu_decl.h"
@@ -171,11 +172,10 @@ unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
return 1UL << camsize;
}
-unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
+ unsigned long ram, int max_cam_idx)
{
int i;
- unsigned long virt = PAGE_OFFSET;
- phys_addr_t phys = memstart_addr;
unsigned long amount_mapped = 0;
/* Calculate CAM values */
@@ -192,9 +192,23 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
}
tlbcam_index = i;
+#ifdef CONFIG_PPC64
+ get_paca()->tcd.esel_next = i;
+ get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+ get_paca()->tcd.esel_first = i;
+#endif
+
return amount_mapped;
}
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+{
+ unsigned long virt = PAGE_OFFSET;
+ phys_addr_t phys = memstart_addr;
+
+ return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx);
+}
+
#ifdef CONFIG_PPC32
#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
@@ -222,7 +236,9 @@ void __init adjust_total_lowmem(void)
/* adjust lowmem size to __max_low_memory */
ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
+ i = switch_to_as1();
__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
+ restore_to_as0(i, 0, 0, 1);
pr_info("Memory CAM mapping: ");
for (i = 0; i < tlbcam_index - 1; i++)
@@ -241,4 +257,62 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
/* 64M mapped initially according to head_fsl_booke.S */
memblock_set_current_limit(min_t(u64, limit, 0x04000000));
}
+
+#ifdef CONFIG_RELOCATABLE
+int __initdata is_second_reloc;
+notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
+{
+ unsigned long base = KERNELBASE;
+
+ kernstart_addr = start;
+ if (is_second_reloc) {
+ virt_phys_offset = PAGE_OFFSET - memstart_addr;
+ return;
+ }
+
+ /*
+ * Relocatable kernel support based on processing of dynamic
+ * relocation entries. Before we get the real memstart_addr,
+ * We will compute the virt_phys_offset like this:
+ * virt_phys_offset = stext.run - kernstart_addr
+ *
+ * stext.run = (KERNELBASE & ~0x3ffffff) +
+ * (kernstart_addr & 0x3ffffff)
+ * When we relocate, we have :
+ *
+ * (kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff)
+ *
+ * hence:
+ * virt_phys_offset = (KERNELBASE & ~0x3ffffff) -
+ * (kernstart_addr & ~0x3ffffff)
+ *
+ */
+ start &= ~0x3ffffff;
+ base &= ~0x3ffffff;
+ virt_phys_offset = base - start;
+ early_get_first_memblock_info(__va(dt_ptr), NULL);
+ /*
+ * We now get the memstart_addr, then we should check if this
+ * address is the same as what the PAGE_OFFSET map to now. If
+ * not we have to change the map of PAGE_OFFSET to memstart_addr
+ * and do a second relocation.
+ */
+ if (start != memstart_addr) {
+ int n;
+ long offset = start - memstart_addr;
+
+ is_second_reloc = 1;
+ n = switch_to_as1();
+ /* map a 64M area for the second relocation */
+ if (memstart_addr > start)
+ map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM);
+ else
+ map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
+ 0x4000000, CONFIG_LOWMEM_CAM_NUM);
+ restore_to_as0(n, offset, __va(dt_ptr), 1);
+ /* We should never reach here */
+ panic("Relocation error");
+ }
+}
+#endif
#endif
diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c
index 74551b5e41e5..5e4ee2573903 100644
--- a/arch/powerpc/mm/hugetlbpage-book3e.c
+++ b/arch/powerpc/mm/hugetlbpage-book3e.c
@@ -8,6 +8,44 @@
#include <linux/mm.h>
#include <linux/hugetlb.h>
+#ifdef CONFIG_PPC_FSL_BOOK3E
+#ifdef CONFIG_PPC64
+static inline int tlb1_next(void)
+{
+ struct paca_struct *paca = get_paca();
+ struct tlb_core_data *tcd;
+ int this, next;
+
+ tcd = paca->tcd_ptr;
+ this = tcd->esel_next;
+
+ next = this + 1;
+ if (next >= tcd->esel_max)
+ next = tcd->esel_first;
+
+ tcd->esel_next = next;
+ return this;
+}
+#else
+static inline int tlb1_next(void)
+{
+ int index, ncams;
+
+ ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+
+ index = __get_cpu_var(next_tlbcam_idx);
+
+ /* Just round-robin the entries and wrap when we hit the end */
+ if (unlikely(index == ncams - 1))
+ __get_cpu_var(next_tlbcam_idx) = tlbcam_index;
+ else
+ __get_cpu_var(next_tlbcam_idx)++;
+
+ return index;
+}
+#endif /* !PPC64 */
+#endif /* FSL */
+
static inline int mmu_get_tsize(int psize)
{
return mmu_psize_defs[psize].enc;
@@ -47,7 +85,7 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
struct mm_struct *mm;
#ifdef CONFIG_PPC_FSL_BOOK3E
- int index, ncams;
+ int index;
#endif
if (unlikely(is_kernel_addr(ea)))
@@ -77,18 +115,11 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
}
#ifdef CONFIG_PPC_FSL_BOOK3E
- ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
-
/* We have to use the CAM(TLB1) on FSL parts for hugepages */
- index = __get_cpu_var(next_tlbcam_idx);
+ index = tlb1_next();
mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1));
-
- /* Just round-robin the entries and wrap when we hit the end */
- if (unlikely(index == ncams - 1))
- __get_cpu_var(next_tlbcam_idx) = tlbcam_index;
- else
- __get_cpu_var(next_tlbcam_idx)++;
#endif
+
mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize);
mas2 = ea & ~((1UL << shift) - 1);
mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK;
@@ -103,7 +134,8 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
if (mmu_has_feature(MMU_FTR_USE_PAIRED_MAS)) {
mtspr(SPRN_MAS7_MAS3, mas7_3);
} else {
- mtspr(SPRN_MAS7, upper_32_bits(mas7_3));
+ if (mmu_has_feature(MMU_FTR_BIG_PHYS))
+ mtspr(SPRN_MAS7, upper_32_bits(mas7_3));
mtspr(SPRN_MAS3, lower_32_bits(mas7_3));
}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 9c25feba7c40..b1c5734bc2ce 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -307,6 +307,12 @@ static void __init register_page_bootmem_info(void)
void __init mem_init(void)
{
+ /*
+ * book3s is limited to 16 page sizes due to encoding this in
+ * a 4-bit field for slices.
+ */
+ BUILD_BUG_ON(MMU_PAGE_COUNT > 16);
+
#ifdef CONFIG_SWIOTLB
swiotlb_init(0);
#endif
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 83eb5d5f53d5..9615d82919b8 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -148,6 +148,8 @@ extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(unsigned long top);
extern void adjust_total_lowmem(void);
+extern int switch_to_as1(void);
+extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
#endif
extern void loadcam_entry(unsigned int index);
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 5b9601715289..343a87fa78b5 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -299,6 +299,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
__pgprot(flags)));
}
+ smp_wmb();
return err;
}
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 7f0e872ab83d..65b7b65e8708 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -152,6 +152,18 @@ int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
}
#endif /* !CONFIG_PPC_MMU_NOHASH */
}
+
+#ifdef CONFIG_PPC_BOOK3E_64
+ /*
+ * With hardware tablewalk, a sync is needed to ensure that
+ * subsequent accesses see the PTE we just wrote. Unlike userspace
+ * mappings, we can't tolerate spurious faults, so make sure
+ * the new PTE will be seen the first time.
+ */
+ mb();
+#else
+ smp_wmb();
+#endif
return 0;
}
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index b4113bf86353..16250b162375 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -136,7 +136,7 @@ BEGIN_MMU_FTR_SECTION
*/
PPC_TLBSRX_DOT(0,R16)
ldx r14,r14,r15 /* grab pgd entry */
- beq normal_tlb_miss_done /* tlb exists already, bail */
+ beq tlb_miss_done_bolted /* tlb exists already, bail */
MMU_FTR_SECTION_ELSE
ldx r14,r14,r15 /* grab pgd entry */
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
@@ -192,6 +192,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
mtspr SPRN_MAS7_MAS3,r15
tlbwe
+tlb_miss_done_bolted:
TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
tlb_epilog_bolted
rfi
@@ -239,6 +240,177 @@ itlb_miss_fault_bolted:
beq tlb_miss_common_bolted
b itlb_miss_kernel_bolted
+/*
+ * TLB miss handling for e6500 and derivatives, using hardware tablewalk.
+ *
+ * Linear mapping is bolted: no virtual page table or nested TLB misses
+ * Indirect entries in TLB1, hardware loads resulting direct entries
+ * into TLB0
+ * No HES or NV hint on TLB1, so we need to do software round-robin
+ * No tlbsrx. so we need a spinlock, and we have to deal
+ * with MAS-damage caused by tlbsx
+ * 4K pages only
+ */
+
+ START_EXCEPTION(instruction_tlb_miss_e6500)
+ tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0
+
+ ld r11,PACA_TCD_PTR(r13)
+ srdi. r15,r16,60 /* get region */
+ ori r16,r16,1
+
+ TLB_MISS_STATS_SAVE_INFO_BOLTED
+ bne tlb_miss_kernel_e6500 /* user/kernel test */
+
+ b tlb_miss_common_e6500
+
+ START_EXCEPTION(data_tlb_miss_e6500)
+ tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR
+
+ ld r11,PACA_TCD_PTR(r13)
+ srdi. r15,r16,60 /* get region */
+ rldicr r16,r16,0,62
+
+ TLB_MISS_STATS_SAVE_INFO_BOLTED
+ bne tlb_miss_kernel_e6500 /* user vs kernel check */
+
+/*
+ * This is the guts of the TLB miss handler for e6500 and derivatives.
+ * We are entered with:
+ *
+ * r16 = page of faulting address (low bit 0 if data, 1 if instruction)
+ * r15 = crap (free to use)
+ * r14 = page table base
+ * r13 = PACA
+ * r11 = tlb_per_core ptr
+ * r10 = crap (free to use)
+ */
+tlb_miss_common_e6500:
+ /*
+ * Search if we already have an indirect entry for that virtual
+ * address, and if we do, bail out.
+ *
+ * MAS6:IND should be already set based on MAS4
+ */
+ addi r10,r11,TCD_LOCK
+1: lbarx r15,0,r10
+ cmpdi r15,0
+ bne 2f
+ li r15,1
+ stbcx. r15,0,r10
+ bne 1b
+ .subsection 1
+2: lbz r15,0(r10)
+ cmpdi r15,0
+ bne 2b
+ b 1b
+ .previous
+
+ mfspr r15,SPRN_MAS2
+
+ tlbsx 0,r16
+ mfspr r10,SPRN_MAS1
+ andis. r10,r10,MAS1_VALID@h
+ bne tlb_miss_done_e6500
+
+ /* Undo MAS-damage from the tlbsx */
+ mfspr r10,SPRN_MAS1
+ oris r10,r10,MAS1_VALID@h
+ mtspr SPRN_MAS1,r10
+ mtspr SPRN_MAS2,r15
+
+ /* Now, we need to walk the page tables. First check if we are in
+ * range.
+ */
+ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+ bne- tlb_miss_fault_e6500
+
+ rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
+ cmpldi cr0,r14,0
+ clrrdi r15,r15,3
+ beq- tlb_miss_fault_e6500 /* No PGDIR, bail */
+ ldx r14,r14,r15 /* grab pgd entry */
+
+ rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
+ clrrdi r15,r15,3
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_e6500 /* Bad pgd entry or hugepage; bail */
+ ldx r14,r14,r15 /* grab pud entry */
+
+ rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
+ clrrdi r15,r15,3
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_e6500
+ ldx r14,r14,r15 /* Grab pmd entry */
+
+ mfspr r10,SPRN_MAS0
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_e6500
+
+ /* Now we build the MAS for a 2M indirect page:
+ *
+ * MAS 0 : ESEL needs to be filled by software round-robin
+ * MAS 1 : Fully set up
+ * - PID already updated by caller if necessary
+ * - TSIZE for now is base ind page size always
+ * - TID already cleared if necessary
+ * MAS 2 : Default not 2M-aligned, need to be redone
+ * MAS 3+7 : Needs to be done
+ */
+
+ ori r14,r14,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
+ mtspr SPRN_MAS7_MAS3,r14
+
+ clrrdi r15,r16,21 /* make EA 2M-aligned */
+ mtspr SPRN_MAS2,r15
+
+ lbz r15,TCD_ESEL_NEXT(r11)
+ lbz r16,TCD_ESEL_MAX(r11)
+ lbz r14,TCD_ESEL_FIRST(r11)
+ rlwimi r10,r15,16,0x00ff0000 /* insert esel_next into MAS0 */
+ addi r15,r15,1 /* increment esel_next */
+ mtspr SPRN_MAS0,r10
+ cmpw r15,r16
+ iseleq r15,r14,r15 /* if next == last use first */
+ stb r15,TCD_ESEL_NEXT(r11)
+
+ tlbwe
+
+tlb_miss_done_e6500:
+ .macro tlb_unlock_e6500
+ li r15,0
+ isync
+ stb r15,TCD_LOCK(r11)
+ .endm
+
+ tlb_unlock_e6500
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
+ tlb_epilog_bolted
+ rfi
+
+tlb_miss_kernel_e6500:
+ mfspr r10,SPRN_MAS1
+ ld r14,PACA_KERNELPGD(r13)
+ cmpldi cr0,r15,8 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ beq+ tlb_miss_common_e6500
+
+tlb_miss_fault_e6500:
+ tlb_unlock_e6500
+ /* We need to check if it was an instruction miss */
+ andi. r16,r16,1
+ bne itlb_miss_fault_e6500
+dtlb_miss_fault_e6500:
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+ tlb_epilog_bolted
+ b exc_data_storage_book3e
+itlb_miss_fault_e6500:
+ TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+ tlb_epilog_bolted
+ b exc_instruction_storage_book3e
+
+
/**********************************************************************
* *
* TLB miss handling for Book3E with TLB reservation and HES support *
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 8805b7b87dc6..735839b74dc5 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -43,6 +43,7 @@
#include <asm/tlb.h>
#include <asm/code-patching.h>
#include <asm/hugetlb.h>
+#include <asm/paca.h>
#include "mmu_decl.h"
@@ -58,6 +59,10 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
.shift = 12,
.enc = BOOK3E_PAGESZ_4K,
},
+ [MMU_PAGE_2M] = {
+ .shift = 21,
+ .enc = BOOK3E_PAGESZ_2M,
+ },
[MMU_PAGE_4M] = {
.shift = 22,
.enc = BOOK3E_PAGESZ_4M,
@@ -136,7 +141,7 @@ static inline int mmu_get_tsize(int psize)
int mmu_linear_psize; /* Page size used for the linear mapping */
int mmu_pte_psize; /* Page size used for PTE pages */
int mmu_vmemmap_psize; /* Page size used for the virtual mem map */
-int book3e_htw_enabled; /* Is HW tablewalk enabled ? */
+int book3e_htw_mode; /* HW tablewalk? Value is PPC_HTW_* */
unsigned long linear_map_top; /* Top of linear mapping */
#endif /* CONFIG_PPC64 */
@@ -377,7 +382,7 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
{
int tsize = mmu_psize_defs[mmu_pte_psize].enc;
- if (book3e_htw_enabled) {
+ if (book3e_htw_mode != PPC_HTW_NONE) {
unsigned long start = address & PMD_MASK;
unsigned long end = address + PMD_SIZE;
unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift;
@@ -430,7 +435,7 @@ static void setup_page_sizes(void)
def = &mmu_psize_defs[psize];
shift = def->shift;
- if (shift == 0)
+ if (shift == 0 || shift & 1)
continue;
/* adjust to be in terms of 4^shift Kb */
@@ -440,21 +445,40 @@ static void setup_page_sizes(void)
def->flags |= MMU_PAGE_SIZE_DIRECT;
}
- goto no_indirect;
+ goto out;
}
if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) {
- u32 tlb1ps = mfspr(SPRN_TLB1PS);
+ u32 tlb1cfg, tlb1ps;
+
+ tlb0cfg = mfspr(SPRN_TLB0CFG);
+ tlb1cfg = mfspr(SPRN_TLB1CFG);
+ tlb1ps = mfspr(SPRN_TLB1PS);
+ eptcfg = mfspr(SPRN_EPTCFG);
+
+ if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT))
+ book3e_htw_mode = PPC_HTW_E6500;
+
+ /*
+ * We expect 4K subpage size and unrestricted indirect size.
+ * The lack of a restriction on indirect size is a Freescale
+ * extension, indicated by PSn = 0 but SPSn != 0.
+ */
+ if (eptcfg != 2)
+ book3e_htw_mode = PPC_HTW_NONE;
for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
struct mmu_psize_def *def = &mmu_psize_defs[psize];
if (tlb1ps & (1U << (def->shift - 10))) {
def->flags |= MMU_PAGE_SIZE_DIRECT;
+
+ if (book3e_htw_mode && psize == MMU_PAGE_2M)
+ def->flags |= MMU_PAGE_SIZE_INDIRECT;
}
}
- goto no_indirect;
+ goto out;
}
#endif
@@ -471,8 +495,11 @@ static void setup_page_sizes(void)
}
/* Indirect page sizes supported ? */
- if ((tlb0cfg & TLBnCFG_IND) == 0)
- goto no_indirect;
+ if ((tlb0cfg & TLBnCFG_IND) == 0 ||
+ (tlb0cfg & TLBnCFG_PT) == 0)
+ goto out;
+
+ book3e_htw_mode = PPC_HTW_IBM;
/* Now, we only deal with one IND page size for each
* direct size. Hopefully all implementations today are
@@ -497,8 +524,8 @@ static void setup_page_sizes(void)
def->ind = ps + 10;
}
}
- no_indirect:
+out:
/* Cleanup array and print summary */
pr_info("MMU: Supported page sizes\n");
for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
@@ -520,23 +547,23 @@ static void setup_page_sizes(void)
static void setup_mmu_htw(void)
{
- /* Check if HW tablewalk is present, and if yes, enable it by:
- *
- * - patching the TLB miss handlers to branch to the
- * one dedicates to it
- *
- * - setting the global book3e_htw_enabled
- */
- unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
+ /*
+ * If we want to use HW tablewalk, enable it by patching the TLB miss
+ * handlers to branch to the one dedicated to it.
+ */
- if ((tlb0cfg & TLBnCFG_IND) &&
- (tlb0cfg & TLBnCFG_PT)) {
+ switch (book3e_htw_mode) {
+ case PPC_HTW_IBM:
patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e);
patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e);
- book3e_htw_enabled = 1;
+ break;
+ case PPC_HTW_E6500:
+ patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e);
+ patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e);
+ break;
}
pr_info("MMU: Book3E HW tablewalk %s\n",
- book3e_htw_enabled ? "enabled" : "not supported");
+ book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported");
}
/*
@@ -576,8 +603,16 @@ static void __early_init_mmu(int boot_cpu)
/* Set MAS4 based on page table setting */
mas4 = 0x4 << MAS4_WIMGED_SHIFT;
- if (book3e_htw_enabled) {
- mas4 |= mas4 | MAS4_INDD;
+ switch (book3e_htw_mode) {
+ case PPC_HTW_E6500:
+ mas4 |= MAS4_INDD;
+ mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT;
+ mas4 |= MAS4_TLBSELD(1);
+ mmu_pte_psize = MMU_PAGE_2M;
+ break;
+
+ case PPC_HTW_IBM:
+ mas4 |= MAS4_INDD;
#ifdef CONFIG_PPC_64K_PAGES
mas4 |= BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT;
mmu_pte_psize = MMU_PAGE_256M;
@@ -585,13 +620,16 @@ static void __early_init_mmu(int boot_cpu)
mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT;
mmu_pte_psize = MMU_PAGE_1M;
#endif
- } else {
+ break;
+
+ case PPC_HTW_NONE:
#ifdef CONFIG_PPC_64K_PAGES
mas4 |= BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT;
#else
mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT;
#endif
mmu_pte_psize = mmu_virtual_psize;
+ break;
}
mtspr(SPRN_MAS4, mas4);
@@ -611,8 +649,11 @@ static void __early_init_mmu(int boot_cpu)
/* limit memory so we dont have linear faults */
memblock_enforce_memory_limit(linear_map_top);
- patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
- patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e);
+ if (book3e_htw_mode == PPC_HTW_NONE) {
+ patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
+ patch_exception(0x1e0,
+ exc_instruction_tlb_miss_bolted_book3e);
+ }
}
#endif
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 626ad081639f..43ff3c797fbf 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -402,7 +402,9 @@ _GLOBAL(set_context)
* Load TLBCAM[index] entry in to the L2 CAM MMU
*/
_GLOBAL(loadcam_entry)
- LOAD_REG_ADDR(r4, TLBCAM)
+ mflr r5
+ LOAD_REG_ADDR_PIC(r4, TLBCAM)
+ mtlr r5
mulli r5,r3,TLBCAM_SIZE
add r3,r5,r4
lwz r4,TLBCAM_MAS0(r3)
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 4d4634958cfb..c17aae80e7ff 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -123,6 +123,12 @@ config P1023_RDS
help
This option enables support for the P1023 RDS and RDB boards
+config TWR_P102x
+ bool "Freescale TWR-P102x"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the TWR-P1025 board.
+
config SOCRATES
bool "Socrates"
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index dd4c0b59577b..25cebe74ac46 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
+obj-$(CONFIG_TWR_P102x) += twr_p102x.o
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index eba78c85303f..3b085c7ee539 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -9,6 +9,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <asm/qe.h>
#include <sysdev/cpm2_pic.h>
#include "mpc85xx.h"
@@ -82,3 +83,40 @@ void __init mpc85xx_cpm2_pic_init(void)
irq_set_chained_handler(irq, cpm2_cascade);
}
#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+void __init mpc85xx_qe_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!np) {
+ np = of_find_node_by_name(NULL, "qe");
+ if (!np) {
+ pr_err("%s: Could not find Quicc Engine node\n",
+ __func__);
+ return;
+ }
+ }
+
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
+ return;
+ }
+
+ qe_reset();
+ of_node_put(np);
+
+ np = of_find_node_by_name(NULL, "par_io");
+ if (np) {
+ struct device_node *ucc;
+
+ par_io_init(np);
+ of_node_put(np);
+
+ for_each_node_by_name(ucc, "ucc")
+ par_io_of_config(ucc);
+
+ }
+}
+#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
index 2aa7c5dc2c7f..fc51dd4092e5 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx.h
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -8,4 +8,10 @@ extern void mpc85xx_cpm2_pic_init(void);
static inline void __init mpc85xx_cpm2_pic_init(void) {}
#endif /* CONFIG_CPM2 */
+#ifdef CONFIG_QUICC_ENGINE
+extern void mpc85xx_qe_init(void);
+#else
+static inline void __init mpc85xx_qe_init(void) {}
+#endif
+
#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a7b3621a8df5..34f3c5eb3bee 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2010, 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc.
* All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
@@ -238,32 +238,7 @@ static void __init mpc85xx_mds_qe_init(void)
{
struct device_node *np;
- np = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!np) {
- np = of_find_node_by_name(NULL, "qe");
- if (!np)
- return;
- }
-
- if (!of_device_is_available(np)) {
- of_node_put(np);
- return;
- }
-
- qe_reset();
- of_node_put(np);
-
- np = of_find_node_by_name(NULL, "par_io");
- if (np) {
- struct device_node *ucc;
-
- par_io_init(np);
- of_node_put(np);
-
- for_each_node_by_name(ucc, "ucc")
- par_io_of_config(ucc);
- }
-
+ mpc85xx_qe_init();
mpc85xx_mds_reset_ucc_phys();
if (machine_is(p1021_mds)) {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 53b6fb0a3d56..e15bdd18fdb2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -1,7 +1,7 @@
/*
* MPC85xx RDB Board Setup
*
- * Copyright 2009,2012 Freescale Semiconductor Inc.
+ * Copyright 2009,2012-2013 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -98,26 +98,7 @@ static void __init mpc85xx_rdb_setup_arch(void)
fsl_pci_assign_primary();
#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!np) {
- pr_err("%s: Could not find Quicc Engine node\n", __func__);
- goto qe_fail;
- }
-
- qe_reset();
- of_node_put(np);
-
- np = of_find_node_by_name(NULL, "par_io");
- if (np) {
- struct device_node *ucc;
-
- par_io_init(np);
- of_node_put(np);
-
- for_each_node_by_name(ucc, "ucc")
- par_io_of_config(ucc);
-
- }
+ mpc85xx_qe_init();
#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
if (machine_is(p1025_rdb)) {
@@ -148,8 +129,6 @@ static void __init mpc85xx_rdb_setup_arch(void)
}
#endif
-
-qe_fail:
#endif /* CONFIG_QUICC_ENGINE */
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 393f975ab397..6382098d6f8d 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -389,15 +389,18 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
}
#endif /* CONFIG_KEXEC */
-static void smp_85xx_setup_cpu(int cpu_nr)
+static void smp_85xx_basic_setup(int cpu_nr)
{
- if (smp_85xx_ops.probe == smp_mpic_probe)
- mpic_setup_this_cpu();
-
if (cpu_has_feature(CPU_FTR_DBELL))
doorbell_setup_this_cpu();
}
+static void smp_85xx_setup_cpu(int cpu_nr)
+{
+ mpic_setup_this_cpu();
+ smp_85xx_basic_setup(cpu_nr);
+}
+
static const struct of_device_id mpc85xx_smp_guts_ids[] = {
{ .compatible = "fsl,mpc8572-guts", },
{ .compatible = "fsl,p1020-guts", },
@@ -412,13 +415,14 @@ void __init mpc85xx_smp_init(void)
{
struct device_node *np;
- smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
np = of_find_node_by_type(NULL, "open-pic");
if (np) {
smp_85xx_ops.probe = smp_mpic_probe;
+ smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
smp_85xx_ops.message_pass = smp_mpic_message_pass;
- }
+ } else
+ smp_85xx_ops.setup_cpu = smp_85xx_basic_setup;
if (cpu_has_feature(CPU_FTR_DBELL)) {
/*
@@ -427,6 +431,7 @@ void __init mpc85xx_smp_init(void)
*/
smp_85xx_ops.message_pass = NULL;
smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
+ smp_85xx_ops.probe = NULL;
}
np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
new file mode 100644
index 000000000000..c25ff10f05ee
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Michael Johnston <michael.johnston@freescale.com>
+ *
+ * Description:
+ * TWR-P102x Board Setup
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <asm/fsl_guts.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+static void __init twr_p1025_pic_init(void)
+{
+ struct mpic *mpic;
+
+#ifdef CONFIG_QUICC_ENGINE
+ struct device_node *np;
+#endif
+
+ mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (np) {
+ qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+ qe_ic_cascade_high_mpic);
+ of_node_put(np);
+ } else
+ pr_err("Could not find qe-ic node\n");
+#endif
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init twr_p1025_setup_arch(void)
+{
+#ifdef CONFIG_QUICC_ENGINE
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("twr_p1025_setup_arch()", 0);
+
+ mpc85xx_smp_init();
+
+ fsl_pci_assign_primary();
+
+#ifdef CONFIG_QUICC_ENGINE
+ mpc85xx_qe_init();
+
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
+ if (machine_is(twr_p1025)) {
+ struct ccsr_guts __iomem *guts;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts");
+ if (np) {
+ guts = of_iomap(np, 0);
+ if (!guts)
+ pr_err("twr_p1025: could not map global utilities register\n");
+ else {
+ /* P1025 has pins muxed for QE and other functions. To
+ * enable QE UEC mode, we need to set bit QE0 for UCC1
+ * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+ * and QE12 for QE MII management signals in PMUXCR
+ * register.
+ * Set QE mux bits in PMUXCR */
+ setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
+ MPC85xx_PMUXCR_QE(3) |
+ MPC85xx_PMUXCR_QE(9) |
+ MPC85xx_PMUXCR_QE(12));
+ iounmap(guts);
+
+#if defined(CONFIG_SERIAL_QE)
+ /* On P1025TWR board, the UCC7 acted as UART port.
+ * However, The UCC7's CTS pin is low level in default,
+ * it will impact the transmission in full duplex
+ * communication. So disable the Flow control pin PA18.
+ * The UCC7 UART just can use RXD and TXD pins.
+ */
+ par_io_config_pin(0, 18, 0, 0, 0, 0);
+#endif
+ /* Drive PB29 to CPLD low - CPLD will then change
+ * muxing from LBC to QE */
+ par_io_config_pin(1, 29, 1, 0, 0, 0);
+ par_io_data_set(1, 29, 0);
+ }
+ of_node_put(np);
+ }
+ }
+#endif
+#endif /* CONFIG_QUICC_ENGINE */
+
+ pr_info("TWR-P1025 board from Freescale Semiconductor\n");
+}
+
+machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices);
+
+static int __init twr_p1025_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,TWR-P1025");
+}
+
+define_machine(twr_p1025) {
+ .name = "TWR-P1025",
+ .probe = twr_p1025_probe,
+ .setup_arch = twr_p1025_setup_arch,
+ .init_IRQ = twr_p1025_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 302ba43d73a1..6d3c7a9fd047 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -67,6 +67,18 @@ config PPC_C2K
This option enables support for the GE Fanuc C2K board (formerly
an SBS board).
+config MVME5100
+ bool "Motorola/Emerson MVME5100"
+ depends on EMBEDDED6xx
+ select MPIC
+ select PCI
+ select PPC_INDIRECT_PCI
+ select PPC_I8259
+ select PPC_NATIVE
+ help
+ This option enables support for the Motorola (now Emerson) MVME5100
+ board.
+
config TSI108_BRIDGE
bool
select PCI
@@ -113,4 +125,3 @@ config WII
help
Select WII if configuring for the Nintendo Wii.
More information at: <http://gc-linux.sourceforge.net/>
-
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 66c23e423f40..cdd48d402b93 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o
obj-$(CONFIG_GAMECUBE) += gamecube.o
obj-$(CONFIG_WII) += wii.o hlwd-pic.o
+obj-$(CONFIG_MVME5100) += mvme5100.o
diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c
new file mode 100644
index 000000000000..25e3bfb64efb
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c
@@ -0,0 +1,221 @@
+/*
+ * Board setup routines for the Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * Based on earlier code by:
+ *
+ * Matt Porter, MontaVista Software Inc.
+ * Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Author: Stephen Chivers <schivers@csc.com>
+ *
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/i8259.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#define HAWK_MPIC_SIZE 0x00040000U
+#define MVME5100_PCI_MEM_OFFSET 0x00000000
+
+/* Board register addresses. */
+#define BOARD_STATUS_REG 0xfef88080
+#define BOARD_MODFAIL_REG 0xfef88090
+#define BOARD_MODRST_REG 0xfef880a0
+#define BOARD_TBEN_REG 0xfef880c0
+#define BOARD_SW_READ_REG 0xfef880e0
+#define BOARD_GEO_ADDR_REG 0xfef880e8
+#define BOARD_EXT_FEATURE1_REG 0xfef880f0
+#define BOARD_EXT_FEATURE2_REG 0xfef88100
+
+static phys_addr_t pci_membase;
+static u_char *restart;
+
+static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned int cascade_irq = i8259_irq();
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static void __init mvme5100_pic_init(void)
+{
+ struct mpic *mpic;
+ struct device_node *np;
+ struct device_node *cp = NULL;
+ unsigned int cirq;
+ unsigned long intack = 0;
+ const u32 *prop = NULL;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (!np) {
+ pr_err("Could not find open-pic node\n");
+ return;
+ }
+
+ mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC ");
+
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_assign_isu(mpic, 0, pci_membase + 0x10000);
+
+ mpic_init(mpic);
+
+ cp = of_find_compatible_node(NULL, NULL, "chrp,iic");
+ if (cp == NULL) {
+ pr_warn("mvme5100_pic_init: couldn't find i8259\n");
+ return;
+ }
+
+ cirq = irq_of_parse_and_map(cp, 0);
+ if (cirq == NO_IRQ) {
+ pr_warn("mvme5100_pic_init: no cascade interrupt?\n");
+ return;
+ }
+
+ np = of_find_compatible_node(NULL, "pci", "mpc10x-pci");
+ if (np) {
+ prop = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+
+ if (prop)
+ intack = prop[0];
+
+ of_node_put(np);
+ }
+
+ if (intack)
+ pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n",
+ intack);
+
+ i8259_init(cp, intack);
+ of_node_put(cp);
+ irq_set_chained_handler(cirq, mvme5100_8259_cascade);
+}
+
+static int __init mvme5100_add_bridge(struct device_node *dev)
+{
+ const int *bus_range;
+ int len;
+ struct pci_controller *hose;
+ unsigned short devid;
+
+ pr_info("Adding PCI host bridge %s\n", dev->full_name);
+
+ bus_range = of_get_property(dev, "bus-range", &len);
+
+ hose = pcibios_alloc_controller(dev);
+ if (hose == NULL)
+ return -ENOMEM;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0);
+
+ pci_process_bridge_OF_ranges(hose, dev, 1);
+
+ early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid);
+
+ if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) {
+ pr_err("HAWK PHB not present?\n");
+ return 0;
+ }
+
+ early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
+
+ if (pci_membase == 0) {
+ pr_err("HAWK PHB mibar not correctly set?\n");
+ return 0;
+ }
+
+ pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase);
+
+ return 0;
+}
+
+static struct of_device_id mvme5100_of_bus_ids[] __initdata = {
+ { .compatible = "hawk-bridge", },
+ {},
+};
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme5100_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mvme5100_setup_arch()", 0);
+
+ for_each_compatible_node(np, "pci", "hawk-pci")
+ mvme5100_add_bridge(np);
+
+ restart = ioremap(BOARD_MODRST_REG, 4);
+}
+
+
+static void mvme5100_show_cpuinfo(struct seq_file *m)
+{
+ seq_puts(m, "Vendor\t\t: Motorola/Emerson\n");
+ seq_puts(m, "Machine\t\t: MVME5100\n");
+}
+
+static void mvme5100_restart(char *cmd)
+{
+
+ local_irq_disable();
+ mtmsr(mfmsr() | MSR_IP);
+
+ out_8((u_char *) restart, 0x01);
+
+ while (1)
+ ;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme5100_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MVME5100");
+}
+
+static int __init probe_of_platform_devices(void)
+{
+
+ of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL);
+ return 0;
+}
+
+machine_device_initcall(mvme5100, probe_of_platform_devices);
+
+define_machine(mvme5100) {
+ .name = "MVME5100",
+ .probe = mvme5100_probe,
+ .setup_arch = mvme5100_setup_arch,
+ .init_IRQ = mvme5100_pic_init,
+ .show_cpuinfo = mvme5100_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = mvme5100_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 6bc5a546d49f..d631022ffb4b 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -214,10 +214,14 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
struct fsl_lbc_ctrl *ctrl = data;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
u32 status;
+ unsigned long flags;
+ spin_lock_irqsave(&fsl_lbc_lock, flags);
status = in_be32(&lbc->ltesr);
- if (!status)
+ if (!status) {
+ spin_unlock_irqrestore(&fsl_lbc_lock, flags);
return IRQ_NONE;
+ }
out_be32(&lbc->ltesr, LTESR_CLEAR);
out_be32(&lbc->lteatr, 0);
@@ -260,6 +264,7 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
if (status & ~LTESR_MASK)
dev_err(ctrl->dev, "Unknown error: "
"LTESR 0x%08X\n", status);
+ spin_unlock_irqrestore(&fsl_lbc_lock, flags);
return IRQ_HANDLED;
}
@@ -298,8 +303,8 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev)
goto err;
}
- fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
- if (fsl_lbc_ctrl_dev->irq == NO_IRQ) {
+ fsl_lbc_ctrl_dev->irq[0] = irq_of_parse_and_map(dev->dev.of_node, 0);
+ if (!fsl_lbc_ctrl_dev->irq[0]) {
dev_err(&dev->dev, "failed to get irq resource\n");
ret = -ENODEV;
goto err;
@@ -311,20 +316,34 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev)
if (ret < 0)
goto err;
- ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0,
+ ret = request_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_irq, 0,
"fsl-lbc", fsl_lbc_ctrl_dev);
if (ret != 0) {
dev_err(&dev->dev, "failed to install irq (%d)\n",
- fsl_lbc_ctrl_dev->irq);
- ret = fsl_lbc_ctrl_dev->irq;
+ fsl_lbc_ctrl_dev->irq[0]);
+ ret = fsl_lbc_ctrl_dev->irq[0];
goto err;
}
+ fsl_lbc_ctrl_dev->irq[1] = irq_of_parse_and_map(dev->dev.of_node, 1);
+ if (fsl_lbc_ctrl_dev->irq[1]) {
+ ret = request_irq(fsl_lbc_ctrl_dev->irq[1], fsl_lbc_ctrl_irq,
+ IRQF_SHARED, "fsl-lbc-err", fsl_lbc_ctrl_dev);
+ if (ret) {
+ dev_err(&dev->dev, "failed to install irq (%d)\n",
+ fsl_lbc_ctrl_dev->irq[1]);
+ ret = fsl_lbc_ctrl_dev->irq[1];
+ goto err1;
+ }
+ }
+
/* Enable interrupts for any detected events */
out_be32(&fsl_lbc_ctrl_dev->regs->lteir, LTEIR_ENABLE);
return 0;
+err1:
+ free_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_dev);
err:
iounmap(fsl_lbc_ctrl_dev->regs);
kfree(fsl_lbc_ctrl_dev);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 7066e5262468..a625dcf26b2b 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -454,7 +454,7 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus)
}
}
-int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
+int fsl_add_bridge(struct platform_device *pdev, int is_primary)
{
int len;
struct pci_controller *hose;
@@ -1035,6 +1035,7 @@ static const struct of_device_id pci_ids[] = {
{ .compatible = "fsl,mpc8548-pcie", },
{ .compatible = "fsl,mpc8610-pci", },
{ .compatible = "fsl,mpc8641-pcie", },
+ { .compatible = "fsl,qoriq-pcie", },
{ .compatible = "fsl,qoriq-pcie-v2.1", },
{ .compatible = "fsl,qoriq-pcie-v2.2", },
{ .compatible = "fsl,qoriq-pcie-v2.3", },
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index c6c8b526a4f6..1f6c570d66d4 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -152,10 +152,8 @@ static struct pci_ops indirect_pci_ops =
.write = indirect_write_config,
};
-void __init
-setup_indirect_pci(struct pci_controller* hose,
- resource_size_t cfg_addr,
- resource_size_t cfg_data, u32 flags)
+void setup_indirect_pci(struct pci_controller *hose, resource_size_t cfg_addr,
+ resource_size_t cfg_data, u32 flags)
{
resource_size_t base = cfg_addr & PAGE_MASK;
void __iomem *mbase;
diff --git a/arch/powerpc/sysdev/mpic_timer.c b/arch/powerpc/sysdev/mpic_timer.c
index 22d7d57eead9..9d9b06217f8b 100644
--- a/arch/powerpc/sysdev/mpic_timer.c
+++ b/arch/powerpc/sysdev/mpic_timer.c
@@ -41,6 +41,7 @@
#define MPIC_TIMER_TCR_ROVR_OFFSET 24
#define TIMER_STOP 0x80000000
+#define GTCCR_TOG 0x80000000
#define TIMERS_PER_GROUP 4
#define MAX_TICKS (~0U >> 1)
#define MAX_TICKS_CASCADE (~0U)
@@ -96,8 +97,11 @@ static void convert_ticks_to_time(struct timer_group_priv *priv,
time->tv_sec = (__kernel_time_t)div_u64(ticks, priv->timerfreq);
tmp_sec = (u64)time->tv_sec * (u64)priv->timerfreq;
- time->tv_usec = (__kernel_suseconds_t)
- div_u64((ticks - tmp_sec) * 1000000, priv->timerfreq);
+ time->tv_usec = 0;
+
+ if (tmp_sec <= ticks)
+ time->tv_usec = (__kernel_suseconds_t)
+ div_u64((ticks - tmp_sec) * 1000000, priv->timerfreq);
return;
}
@@ -327,11 +331,13 @@ void mpic_get_remain_time(struct mpic_timer *handle, struct timeval *time)
casc_priv = priv->timer[handle->num].cascade_handle;
if (casc_priv) {
tmp_ticks = in_be32(&priv->regs[handle->num].gtccr);
+ tmp_ticks &= ~GTCCR_TOG;
ticks = ((u64)tmp_ticks & UINT_MAX) * (u64)MAX_TICKS_CASCADE;
tmp_ticks = in_be32(&priv->regs[handle->num - 1].gtccr);
ticks += tmp_ticks;
} else {
ticks = in_be32(&priv->regs[handle->num].gtccr);
+ ticks &= ~GTCCR_TOG;
}
convert_ticks_to_time(priv, ticks, time);
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 978db344bda0..b24aa010f68c 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -366,7 +366,7 @@ config TRACE_SINK
"Trace data router for MIPI P1149.7 cJTAG standard".
config PPC_EPAPR_HV_BYTECHAN
- tristate "ePAPR hypervisor byte channel driver"
+ bool "ePAPR hypervisor byte channel driver"
depends on PPC
select EPAPR_PARAVIRT
help
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 0beaee9dac1f..2b77058a7335 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -116,6 +116,7 @@ extern const void *of_flat_dt_match_machine(const void *default_match,
extern void unflatten_device_tree(void);
extern void unflatten_and_copy_device_tree(void);
extern void early_init_devtree(void *);
+extern void early_get_first_memblock_info(void *, phys_addr_t *);
#else /* CONFIG_OF_FLATTREE */
static inline const char *of_flat_dt_get_machine_name(void) { return NULL; }
static inline void unflatten_device_tree(void) {}
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index 9696a5e2c437..6bdf8c61d221 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -685,7 +685,7 @@ do { \
else \
{ \
r = 0; \
- if (X##_s) \
+ if (!X##_s) \
r = ~r; \
} \
FP_SET_EXCEPTION(FP_EX_INVALID); \
@@ -743,12 +743,17 @@ do { \
} \
else \
{ \
+ int _lz0, _lz1; \
if (X##_e <= -_FP_WORKBITS - 1) \
_FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc); \
else \
_FP_FRAC_SRS_##wc(X, _FP_FRACBITS_##fs - 1 - X##_e, \
_FP_WFRACBITS_##fs); \
+ _FP_FRAC_CLZ_##wc(_lz0, X); \
_FP_ROUND(wc, X); \
+ _FP_FRAC_CLZ_##wc(_lz1, X); \
+ if (_lz1 < _lz0) \
+ X##_e++; /* For overflow detection. */ \
_FP_FRAC_SRL_##wc(X, _FP_WORKBITS); \
_FP_FRAC_ASSEMBLE_##wc(r, X, rsize); \
} \
@@ -762,7 +767,7 @@ do { \
if (!rsigned) \
{ \
r = 0; \
- if (X##_s) \
+ if (!X##_s) \
r = ~r; \
} \
else if (rsigned != 2) \