summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:28:06 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:28:06 -0700
commit2a2bf85f05e42b12ea6bfe821e2d19221cf93555 (patch)
tree11abcdaef6e4f8307574056998d306d21558b6ed /Documentation
parent11801e9de26992d37cb869cc74f389b6a7677e0e (diff)
parent99261fbad0a16f105b262d7525801697588ba526 (diff)
Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc device tree updates from Olof Johansson: "Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8." Trivial conflicts due to removal of vt8500 files, and one documentation file that was added with slightly different contents both here and in the USb tree. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits) arm: vt8500: Fixup for missing gpio.h ARM: LPC32xx: LED fix in PHY3250 DTS file ARM: dt: mmp-dma: add binding file arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/mrvl/tauros2.txt17
-rw-r--r--Documentation/devicetree/bindings/arm/msm/timer.txt38
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/vt8500.txt14
-rw-r--r--Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt16
-rw-r--r--Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt13
-rw-r--r--Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt15
-rw-r--r--Documentation/devicetree/bindings/clock/imx23-clock.txt76
-rw-r--r--Documentation/devicetree/bindings/clock/imx28-clock.txt99
-rw-r--r--Documentation/devicetree/bindings/clock/imx6q-clock.txt222
-rw-r--r--Documentation/devicetree/bindings/clock/vt8500.txt72
-rw-r--r--Documentation/devicetree/bindings/dma/mmp-dma.txt74
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-samsung.txt43
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-twl4030.txt6
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-vt8500.txt24
-rw-r--r--Documentation/devicetree/bindings/i2c/trivial-devices.txt1
-rw-r--r--Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt52
-rw-r--r--Documentation/devicetree/bindings/lpddr2/lpddr2.txt102
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/ti/emif.txt55
-rw-r--r--Documentation/devicetree/bindings/mfd/ab8500.txt15
-rw-r--r--Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt31
-rw-r--r--Documentation/devicetree/bindings/rtc/pxa-rtc.txt14
-rw-r--r--Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt15
-rw-r--r--Documentation/devicetree/bindings/sound/ux500-mop500.txt39
-rw-r--r--Documentation/devicetree/bindings/sound/ux500-msp.txt43
-rw-r--r--Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt17
-rw-r--r--Documentation/devicetree/bindings/usb/platform-uhci.txt21
-rw-r--r--Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt15
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
-rw-r--r--Documentation/devicetree/bindings/video/via,vt8500-fb.txt62
-rw-r--r--Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt13
-rw-r--r--Documentation/devicetree/bindings/video/wm,wm8505-fb.txt23
32 files changed, 1243 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt
new file mode 100644
index 000000000000..31af1cbb60bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt
@@ -0,0 +1,17 @@
+* Marvell Tauros2 Cache
+
+Required properties:
+- compatible : Should be "marvell,tauros2-cache".
+- marvell,tauros2-cache-features : Specify the features supported for the
+ tauros2 cache.
+ The features including
+ CACHE_TAUROS2_PREFETCH_ON (1 << 0)
+ CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1)
+ The definition can be found at
+ arch/arm/include/asm/hardware/cache-tauros2.h
+
+Example:
+ L2: l2-cache {
+ compatible = "marvell,tauros2-cache";
+ marvell,tauros2-cache-features = <0x3>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
new file mode 100644
index 000000000000..8c5907b9cae8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -0,0 +1,38 @@
+* MSM Timer
+
+Properties:
+
+- compatible : Should at least contain "qcom,msm-timer". More specific
+ properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general
+ purpose timer and a debug timer respectively.
+
+- interrupts : Interrupt indicating a match event.
+
+- reg : Specifies the base address of the timer registers. The second region
+ specifies an optional register used to configure the clock divider.
+
+- clock-frequency : The frequency of the timer in Hz.
+
+Optional:
+
+- cpu-offset : per-cpu offset used when the timer is accessed without the
+ CPU remapping facilities. The offset is cpu-offset * cpu-nr.
+
+Example:
+
+ timer@200a004 {
+ compatible = "qcom,msm-gpt", "qcom,msm-timer";
+ interrupts = <1 2 0x301>;
+ reg = <0x0200a004 0x10>;
+ clock-frequency = <32768>;
+ cpu-offset = <0x40000>;
+ };
+
+ timer@200a024 {
+ compatible = "qcom,msm-dgt", "qcom,msm-timer";
+ interrupts = <1 3 0x301>;
+ reg = <0x0200a024 0x10>,
+ <0x0200a034 0x4>;
+ clock-frequency = <6750000>;
+ cpu-offset = <0x40000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index ccdd0e53451f..d0051a750587 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -36,6 +36,9 @@ Boards:
- OMAP3 BeagleBoard : Low cost community board
compatible = "ti,omap3-beagle", "ti,omap3"
+- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
+ compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+
- OMAP4 SDP : Software Developement Board
compatible = "ti,omap4-sdp", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt
new file mode 100644
index 000000000000..d657832c6819
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500.txt
@@ -0,0 +1,14 @@
+VIA/Wondermedia VT8500 Platforms Device Tree Bindings
+---------------------------------------
+
+Boards with the VIA VT8500 SoC shall have the following properties:
+Required root node property:
+compatible = "via,vt8500";
+
+Boards with the Wondermedia WM8505 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8505";
+
+Boards with the Wondermedia WM8650 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8650";
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
new file mode 100644
index 000000000000..0a4ce1051b02
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
@@ -0,0 +1,16 @@
+VIA/Wondermedia VT8500 Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-intc"
+- reg : Should contain 1 register ranges(address and length)
+- #interrupt-cells : should be <1>
+
+Example:
+
+ intc: interrupt-controller@d8140000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ reg = <0xd8140000 0x10000>;
+ #interrupt-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
new file mode 100644
index 000000000000..521b9c7de933
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
@@ -0,0 +1,13 @@
+VIA/Wondermedia VT8500 Power Management Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-pmc"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+ pmc@d8130000 {
+ compatible = "via,vt8500-pmc";
+ reg = <0xd8130000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
new file mode 100644
index 000000000000..901c73f0d8ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Timer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-timer"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : interrupt for the timer
+
+Example:
+
+ timer@d8130100 {
+ compatible = "via,vt8500-timer";
+ reg = <0xd8130100 0x28>;
+ interrupts = <36>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
new file mode 100644
index 000000000000..a0b867ef8d96
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt
@@ -0,0 +1,76 @@
+* Clock bindings for Freescale i.MX23
+
+Required properties:
+- compatible: Should be "fsl,imx23-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX23
+clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll 1
+ ref_cpu 2
+ ref_emi 3
+ ref_pix 4
+ ref_io 5
+ saif_sel 6
+ lcdif_sel 7
+ gpmi_sel 8
+ ssp_sel 9
+ emi_sel 10
+ cpu 11
+ etm_sel 12
+ cpu_pll 13
+ cpu_xtal 14
+ hbus 15
+ xbus 16
+ lcdif_div 17
+ ssp_div 18
+ gpmi_div 19
+ emi_pll 20
+ emi_xtal 21
+ etm_div 22
+ saif_div 23
+ clk32k_div 24
+ rtc 25
+ adc 26
+ spdif_div 27
+ clk32k 28
+ dri 29
+ pwm 30
+ filt 31
+ uart 32
+ ssp 33
+ gpmi 34
+ spdif 35
+ emi 36
+ saif 37
+ lcdif 38
+ etm 39
+ usb 40
+ usb_pwr 41
+
+Examples:
+
+clks: clkctrl@80040000 {
+ compatible = "fsl,imx23-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ clock-output-names =
+ ...
+ "uart", /* 32 */
+ ...
+ "end_of_list";
+};
+
+auart0: serial@8006c000 {
+ compatible = "fsl,imx23-auart";
+ reg = <0x8006c000 0x2000>;
+ interrupts = <24 25 23>;
+ clocks = <&clks 32>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
new file mode 100644
index 000000000000..aa2af2866fe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt
@@ -0,0 +1,99 @@
+* Clock bindings for Freescale i.MX28
+
+Required properties:
+- compatible: Should be "fsl,imx28-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX28
+clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll0 1
+ pll1 2
+ pll2 3
+ ref_cpu 4
+ ref_emi 5
+ ref_io0 6
+ ref_io1 7
+ ref_pix 8
+ ref_hsadc 9
+ ref_gpmi 10
+ saif0_sel 11
+ saif1_sel 12
+ gpmi_sel 13
+ ssp0_sel 14
+ ssp1_sel 15
+ ssp2_sel 16
+ ssp3_sel 17
+ emi_sel 18
+ etm_sel 19
+ lcdif_sel 20
+ cpu 21
+ ptp_sel 22
+ cpu_pll 23
+ cpu_xtal 24
+ hbus 25
+ xbus 26
+ ssp0_div 27
+ ssp1_div 28
+ ssp2_div 29
+ ssp3_div 30
+ gpmi_div 31
+ emi_pll 32
+ emi_xtal 33
+ lcdif_div 34
+ etm_div 35
+ ptp 36
+ saif0_div 37
+ saif1_div 38
+ clk32k_div 39
+ rtc 40
+ lradc 41
+ spdif_div 42
+ clk32k 43
+ pwm 44
+ uart 45
+ ssp0 46
+ ssp1 47
+ ssp2 48
+ ssp3 49
+ gpmi 50
+ spdif 51
+ emi 52
+ saif0 53
+ saif1 54
+ lcdif 55
+ etm 56
+ fec 57
+ can0 58
+ can1 59
+ usb0 60
+ usb1 61
+ usb0_pwr 62
+ usb1_pwr 63
+ enet_out 64
+
+Examples:
+
+clks: clkctrl@80040000 {
+ compatible = "fsl,imx28-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ clock-output-names =
+ ...
+ "uart", /* 45 */
+ ...
+ "end_of_list";
+};
+
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+ clocks = <&clks 45>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
new file mode 100644
index 000000000000..492bd991d52a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -0,0 +1,222 @@
+* Clock bindings for Freescale i.MX6 Quad
+
+Required properties:
+- compatible: Should be "fsl,imx6q-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX6Q
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ dummy 0
+ ckil 1
+ ckih 2
+ osc 3
+ pll2_pfd0_352m 4
+ pll2_pfd1_594m 5
+ pll2_pfd2_396m 6
+ pll3_pfd0_720m 7
+ pll3_pfd1_540m 8
+ pll3_pfd2_508m 9
+ pll3_pfd3_454m 10
+ pll2_198m 11
+ pll3_120m 12
+ pll3_80m 13
+ pll3_60m 14
+ twd 15
+ step 16
+ pll1_sw 17
+ periph_pre 18
+ periph2_pre 19
+ periph_clk2_sel 20
+ periph2_clk2_sel 21
+ axi_sel 22
+ esai_sel 23
+ asrc_sel 24
+ spdif_sel 25
+ gpu2d_axi 26
+ gpu3d_axi 27
+ gpu2d_core_sel 28
+ gpu3d_core_sel 29
+ gpu3d_shader_sel 30
+ ipu1_sel 31
+ ipu2_sel 32
+ ldb_di0_sel 33
+ ldb_di1_sel 34
+ ipu1_di0_pre_sel 35
+ ipu1_di1_pre_sel 36
+ ipu2_di0_pre_sel 37
+ ipu2_di1_pre_sel 38
+ ipu1_di0_sel 39
+ ipu1_di1_sel 40
+ ipu2_di0_sel 41
+ ipu2_di1_sel 42
+ hsi_tx_sel 43
+ pcie_axi_sel 44
+ ssi1_sel 45
+ ssi2_sel 46
+ ssi3_sel 47
+ usdhc1_sel 48
+ usdhc2_sel 49
+ usdhc3_sel 50
+ usdhc4_sel 51
+ enfc_sel 52
+ emi_sel 53
+ emi_slow_sel 54
+ vdo_axi_sel 55
+ vpu_axi_sel 56
+ cko1_sel 57
+ periph 58
+ periph2 59
+ periph_clk2 60
+ periph2_clk2 61
+ ipg 62
+ ipg_per 63
+ esai_pred 64
+ esai_podf 65
+ asrc_pred 66
+ asrc_podf 67
+ spdif_pred 68
+ spdif_podf 69
+ can_root 70
+ ecspi_root 71
+ gpu2d_core_podf 72
+ gpu3d_core_podf 73
+ gpu3d_shader 74
+ ipu1_podf 75
+ ipu2_podf 76
+ ldb_di0_podf 77
+ ldb_di1_podf 78
+ ipu1_di0_pre 79
+ ipu1_di1_pre 80
+ ipu2_di0_pre 81
+ ipu2_di1_pre 82
+ hsi_tx_podf 83
+ ssi1_pred 84
+ ssi1_podf 85
+ ssi2_pred 86
+ ssi2_podf 87
+ ssi3_pred 88
+ ssi3_podf 89
+ uart_serial_podf 90
+ usdhc1_podf 91
+ usdhc2_podf 92
+ usdhc3_podf 93
+ usdhc4_podf 94
+ enfc_pred 95
+ enfc_podf 96
+ emi_podf 97
+ emi_slow_podf 98
+ vpu_axi_podf 99
+ cko1_podf 100
+ axi 101
+ mmdc_ch0_axi_podf 102
+ mmdc_ch1_axi_podf 103
+ arm 104
+ ahb 105
+ apbh_dma 106
+ asrc 107
+ can1_ipg 108
+ can1_serial 109
+ can2_ipg 110
+ can2_serial 111
+ ecspi1 112
+ ecspi2 113
+ ecspi3 114
+ ecspi4 115
+ ecspi5 116
+ enet 117
+ esai 118
+ gpt_ipg 119
+ gpt_ipg_per 120
+ gpu2d_core 121
+ gpu3d_core 122
+ hdmi_iahb 123
+ hdmi_isfr 124
+ i2c1 125
+ i2c2 126
+ i2c3 127
+ iim 128
+ enfc 129
+ ipu1 130
+ ipu1_di0 131
+ ipu1_di1 132
+ ipu2 133
+ ipu2_di0 134
+ ldb_di0 135
+ ldb_di1 136
+ ipu2_di1 137
+ hsi_tx 138
+ mlb 139
+ mmdc_ch0_axi 140
+ mmdc_ch1_axi 141
+ ocram 142
+ openvg_axi 143
+ pcie_axi 144
+ pwm1 145
+ pwm2 146
+ pwm3 147
+ pwm4 148
+ per1_bch 149
+ gpmi_bch_apb 150
+ gpmi_bch 151
+ gpmi_io 152
+ gpmi_apb 153
+ sata 154
+ sdma 155
+ spba 156
+ ssi1 157
+ ssi2 158
+ ssi3 159
+ uart_ipg 160
+ uart_serial 161
+ usboh3 162
+ usdhc1 163
+ usdhc2 164
+ usdhc3 165
+ usdhc4 166
+ vdo_axi 167
+ vpu_axi 168
+ cko1 169
+ pll1_sys 170
+ pll2_bus 171
+ pll3_usb_otg 172
+ pll4_audio 173
+ pll5_video 174
+ pll6_mlb 175
+ pll7_usb_host 176
+ pll8_enet 177
+ ssi1_ipg 178
+ ssi2_ipg 179
+ ssi3_ipg 180
+ rom 181
+ usbphy1 182
+ usbphy2 183
+ ldb_di0_div_3_5 184
+ ldb_di1_div_3_5 185
+
+Examples:
+
+clks: ccm@020c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ #clock-cells = <1>;
+ clock-output-names = ...
+ "uart_ipg",
+ "uart_serial",
+ ...;
+};
+
+uart1: serial@02020000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt
new file mode 100644
index 000000000000..a880c70d0047
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/vt8500.txt
@@ -0,0 +1,72 @@
+Device Tree Clock bindings for arch-vt8500
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock
+ "wm,wm8650-pll-clock" - for a WM8650 PLL clock
+ "via,vt8500-device-clock" - for a VT/WM device clock
+
+Required properties for PLL clocks:
+- reg : shall be the control register offset from PMC base for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Required properties for device clocks:
+- clocks : shall be the input parent clock phandle for the clock. This should
+ be a pll output.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+
+Device Clocks
+
+Device clocks are required to have one or both of the following sets of
+properties:
+
+
+Gated device clocks:
+
+Required properties:
+- enable-reg : shall be the register offset from PMC base for the enable
+ register.
+- enable-bit : shall be the bit within enable-reg to enable/disable the clock.
+
+
+Divisor device clocks:
+
+Required property:
+- divisor-reg : shall be the register offset from PMC base for the divisor
+ register.
+Optional property:
+- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f
+ if not specified.
+
+
+For example:
+
+ref25: ref25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+};
+
+plla: plla {
+ #clock-cells = <0>;
+ compatible = "wm,wm8650-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x200>;
+};
+
+sdhc: sdhc {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x328>;
+ divisor-mask = <0x3f>;
+ enable-reg = <0x254>;
+ enable-bit = <18>;
+};
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
new file mode 100644
index 000000000000..a4fa4efa1d83
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt
@@ -0,0 +1,74 @@
+* MARVELL MMP DMA controller
+
+Marvell Peripheral DMA Controller
+Used platfroms: pxa688, pxa910, pxa3xx, etc
+
+Required properties:
+- compatible: Should be "marvell,pdma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Either contain all of the per-channel DMA interrupts
+ or one irq for pdma device
+- #dma-channels: Number of DMA channels supported by the controller.
+
+"marvell,pdma-1.0"
+Used platfroms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
+
+Examples:
+
+/*
+ * Each channel has specific irq
+ * ICU parse out irq channel from ICU register,
+ * while DMA controller may not able to distinguish the irq channel
+ * Using this method, interrupt-parent is required as demuxer
+ * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
+ * 18~21 is ADMA irq
+ */
+pdma: dma-controller@d4000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0xd4000000 0x10000>;
+ interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+ interrupt-parent = <&intcmux32>;
+ #dma-channels = <16>;
+ };
+
+/*
+ * One irq for all channels
+ * Dmaengine driver (DMA controller) distinguish irq channel via
+ * parsing internal register
+ */
+pdma: dma-controller@d4000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0xd4000000 0x10000>;
+ interrupts = <47>;
+ #dma-channels = <16>;
+ };
+
+
+Marvell Two Channel DMA Controller used specifically for audio
+Used platfroms: pxa688, pxa910
+
+Required properties:
+- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
+- reg: Should contain DMA registers location and length.
+- interrupts: Either contain all of the per-channel DMA interrupts
+ or one irq for dma device
+
+"marvell,adma-1.0" used on pxa688
+"marvell,pxa910-squ" used on pxa910
+
+Examples:
+
+/* each channel has specific irq */
+adma0: dma-controller@d42a0800 {
+ compatible = "marvell,adma-1.0";
+ reg = <0xd42a0800 0x100>;
+ interrupts = <18 19>;
+ interrupt-parent = <&intcmux32>;
+ };
+
+/* One irq for all channels */
+squ: dma-controller@d42a0800 {
+ compatible = "marvell,pxa910-squ";
+ reg = <0xd42a0800 0x100>;
+ interrupts = <46>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
index 5375625e8cd2..f1e5dfecf55d 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -39,3 +39,46 @@ Example:
#gpio-cells = <4>;
gpio-controller;
};
+
+
+Samsung S3C24XX GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c24xx-gpio".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes
+ should be the following with values derived from the SoC user manual.
+ <[phandle of the gpio controller node]
+ [pin number within the gpio controller]
+ [mux function]
+ [flags and pull up/down]
+
+ Values for gpio specifier:
+ - Pin number: depending on the controller a number from 0 up to 15.
+ - Mux function: Depending on the SoC and the gpio bank the gpio can be set
+ as input, output or a special function
+ - Flags and Pull Up/Down: the values to use differ for the individual SoCs
+ example S3C2416/S3C2450:
+ 0 - Pull Up/Down Disabled.
+ 1 - Pull Down Enabled.
+ 2 - Pull Up Enabled.
+ Bit 16 (0x00010000) - Input is active low.
+ Consult the user manual for the correct values of Mux and Pull Up/Down.
+
+- gpio-controller: Specifies that the node is a gpio controller.
+- #address-cells: should be 1.
+- #size-cells: should be 1.
+
+Example:
+
+ gpa: gpio-controller@56000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "samsung,s3c24xx-gpio";
+ reg = <0x56000000 0x10>;
+ #gpio-cells = <3>;
+ gpio-controller;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
index 16695d9cf1e8..66788fda1db3 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
@@ -11,6 +11,11 @@ Required properties:
- interrupt-controller: Mark the device node as an interrupt controller
The first cell is the GPIO number.
The second cell is not used.
+- ti,use-leds : Enables LEDA and LEDB outputs if set
+- ti,debounce : if n-th bit is set, debounces GPIO-n
+- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
+- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
+- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
Example:
@@ -20,4 +25,5 @@ twl_gpio: gpio {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ ti,use-leds;
};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
new file mode 100644
index 000000000000..f4dc5233167e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
@@ -0,0 +1,24 @@
+VIA/Wondermedia VT8500 GPIO Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-gpio", "wm,wm8505-gpio"
+ or "wm,wm8650-gpio" depending on your SoC
+- reg : Should contain 1 register range (address and length)
+- #gpio-cells : should be <3>.
+ 1) bank
+ 2) pin number
+ 3) flags - should be 0
+
+Example:
+
+ gpio: gpio-controller@d8110000 {
+ compatible = "via,vt8500-gpio";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <3>;
+ };
+
+ vibrate {
+ gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */
+ };
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 1a85f986961b..2f5322b119eb 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,3 +56,4 @@ stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
ti,tsc2003 I2C Touch-Screen Controller
+ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
new file mode 100644
index 000000000000..9ceb19e0c7fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
@@ -0,0 +1,52 @@
+* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
+
+Required properties:
+- compatible : Should be "jedec,lpddr2-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
+
+Optional properties:
+
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds). Parameters with
+a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
+- tRCD
+- tWR
+- tRAS-min
+- tRRD
+- tWTR
+- tXP
+- tRTP
+- tDQSCK-max
+- tFAW
+- tZQCS
+- tZQinit
+- tRPab
+- tZQCL
+- tCKESR
+- tRAS-max-ns
+- tDQSCK-max-derated
+
+Example:
+
+timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+};
diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt
new file mode 100644
index 000000000000..58354a075e13
--- /dev/null
+++ b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt
@@ -0,0 +1,102 @@
+* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
+
+Required properties:
+- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
+ "jedec,lpddr2-s4"
+
+ "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
+
+ "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
+
+ "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
+
+- density : <u32> representing density in Mb (Mega bits)
+
+- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
+
+Optional properties:
+
+The following optional properties represent the minimum value of some AC
+timing parameters of the DDR device in terms of number of clock cycles.
+These values shall be obtained from the device data-sheet.
+- tRRD-min-tck
+- tWTR-min-tck
+- tXP-min-tck
+- tRTP-min-tck
+- tCKE-min-tck
+- tRPab-min-tck
+- tRCD-min-tck
+- tWR-min-tck
+- tRASmin-min-tck
+- tCKESR-min-tck
+- tFAW-min-tck
+
+Child nodes:
+- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+ "lpddr2-timings" provides AC timing parameters of the device for
+ a given speed-bin. The user may provide the timings for as many
+ speed-bins as is required. Please see Documentation/devicetree/
+ bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings"
+
+Example:
+
+elpida_ECB240ABACN : lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ };
+
+}
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
new file mode 100644
index 000000000000..938f8e1ba205
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -0,0 +1,55 @@
+* EMIF family of TI SDRAM controllers
+
+EMIF - External Memory Interface - is an SDRAM controller used in
+TI SoCs. EMIF supports, based on the IP revision, one or more of
+DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
+of the EMIF IP and memory parts attached to it.
+
+Required properties:
+- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
+ is the IP revision of the specific EMIF instance.
+
+- phy-type : <u32> indicating the DDR phy type. Following are the
+ allowed values
+ <1> : Attila PHY
+ <2> : Intelli PHY
+
+- device-handle : phandle to a "lpddr2" node representing the memory part
+
+- ti,hwmods : For TI hwmods processing and omap device creation
+ the value shall be "emif<n>" where <n> is the number of the EMIF
+ instance with base 1.
+
+Optional properties:
+- cs1-used : Have this property if CS1 of this EMIF
+ instance has a memory part attached to it. If there is a memory
+ part attached to CS1, it should be the same type as the one on CS0,
+ so there is no need to give the details of this memory part.
+
+- cal-resistor-per-cs : Have this property if the board has one
+ calibration resistor per chip-select.
+
+- hw-caps-read-idle-ctrl: Have this property if the controller
+ supports read idle window programming
+
+- hw-caps-dll-calib-ctrl: Have this property if the controller
+ supports dll calibration control
+
+- hw-caps-ll-interface : Have this property if the controller
+ has a low latency interface and corresponding interrupt events
+
+- hw-caps-temp-alert : Have this property if the controller
+ has capability for generating SDRAM temperature alerts
+
+Example:
+
+emif1: emif@0x4c000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ device-handle = <&elpida_ECB240ABACN>;
+ cs1-used;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+};
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index 69e757a657a0..ce83c8d3c00e 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -23,6 +23,7 @@ Device IRQ Names Supply Names Description
ab8500-bm : : : Battery Manager
ab8500-btemp : : : Battery Temperature
ab8500-charger : : : Battery Charger
+ab8500-codec : : : Audio Codec
ab8500-fg : : : Fuel Gauge
ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
SW_CONV_END : :
@@ -52,6 +53,14 @@ Optional child device properties:
supplied in the interrupts property
- <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree
+Non-standard child device properties:
+ - Audio CODEC:
+ - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
+ - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
+ - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
+ - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
+ - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
+
ab8500@5 {
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
@@ -110,6 +119,12 @@ ab8500@5 {
compatible = "stericsson,ab8500-pwm";
};
+ codec: ab8500-codec {
+ compatible = "stericsson,ab8500-codec";
+
+ stericsson,earpeice-cmv = <950>; /* Units in mV. */
+ };
+
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
new file mode 100644
index 000000000000..f1421e2bbab7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -0,0 +1,31 @@
+PXA3xx NAND DT bindings
+
+Required properties:
+
+ - compatible: Should be "marvell,pxa3xx-nand"
+ - reg: The register base for the controller
+ - interrupts: The interrupt to map
+ - #address-cells: Set to <1> if the node includes partitions
+
+Optional properties:
+
+ - marvell,nand-enable-arbiter: Set to enable the bus arbiter
+ - marvell,nand-keep-config: Set to keep the NAND controller config as set
+ by the bootloader
+ - num-cs: Number of chipselect lines to usw
+
+Example:
+
+ nand0: nand@43100000 {
+ compatible = "marvell,pxa3xx-nand";
+ reg = <0x43100000 90>;
+ interrupts = <45>;
+ #address-cells = <1>;
+
+ marvell,nand-enable-arbiter;
+ marvell,nand-keep-config;
+ num-cs = <1>;
+
+ /* partitions (optional) */
+ };
+
diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
new file mode 100644
index 000000000000..8c6672a1b7d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
@@ -0,0 +1,14 @@
+* PXA RTC
+
+PXA specific RTC driver.
+
+Required properties:
+- compatible : Should be "marvell,pxa-rtc"
+
+Examples:
+
+rtc@40900000 {
+ compatible = "marvell,pxa-rtc";
+ reg = <0x40900000 0x3c>;
+ interrupts = <30 31>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
new file mode 100644
index 000000000000..3c0484c49582
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Realtime Clock Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-rtc"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : alarm interrupt
+
+Example:
+
+ rtc@d8100000 {
+ compatible = "via,vt8500-rtc";
+ reg = <0xd8100000 0x10000>;
+ interrupts = <48>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/ux500-mop500.txt b/Documentation/devicetree/bindings/sound/ux500-mop500.txt
new file mode 100644
index 000000000000..48e071c96b46
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ux500-mop500.txt
@@ -0,0 +1,39 @@
+* MOP500 Audio Machine Driver
+
+This node is responsible for linking together all ux500 Audio Driver components.
+
+Required properties:
+ - compatible : "stericsson,snd-soc-mop500"
+
+Non-standard properties:
+ - stericsson,cpu-dai : Phandle to the CPU-side DAI
+ - stericsson,audio-codec : Phandle to the Audio CODEC
+ - stericsson,card-name : Over-ride default card name
+
+Example:
+
+ sound {
+ compatible = "stericsson,snd-soc-mop500";
+
+ stericsson,cpu-dai = <&msp1 &msp3>;
+ stericsson,audio-codec = <&codec>;
+ };
+
+ msp1: msp@80124000 {
+ compatible = "stericsson,ux500-msp-i2s";
+ reg = <0x80124000 0x1000>;
+ interrupts = <0 62 0x4>;
+ v-ape-supply = <&db8500_vape_reg>;
+ };
+
+ msp3: msp@80125000 {
+ compatible = "stericsson,ux500-msp-i2s";
+ reg = <0x80125000 0x1000>;
+ interrupts = <0 62 0x4>;
+ v-ape-supply = <&db8500_vape_reg>;
+ };
+
+ codec: ab8500-codec {
+ compatible = "stericsson,ab8500-codec";
+ stericsson,earpeice-cmv = <950>; /* Units in mV. */
+ };
diff --git a/Documentation/devicetree/bindings/sound/ux500-msp.txt b/Documentation/devicetree/bindings/sound/ux500-msp.txt
new file mode 100644
index 000000000000..99acd9c774e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ux500-msp.txt
@@ -0,0 +1,43 @@
+* ux500 MSP (CPU-side Digital Audio Interface)
+
+Required properties:
+ - compatible :"stericsson,ux500-msp-i2s"
+ - reg : Physical base address and length of the device's registers.
+
+Optional properties:
+ - interrupts : The interrupt output from the device.
+ - interrupt-parent : The parent interrupt controller.
+ - <name>-supply : Phandle to the regulator <name> supply
+
+Example:
+
+ sound {
+ compatible = "stericsson,snd-soc-mop500";
+
+ stericsson,platform-pcm-dma = <&pcm>;
+ stericsson,cpu-dai = <&msp1 &msp3>;
+ stericsson,audio-codec = <&codec>;
+ };
+
+ pcm: ux500-pcm {
+ compatible = "stericsson,ux500-pcm";
+ };
+
+ msp1: msp@80124000 {
+ compatible = "stericsson,ux500-msp-i2s";
+ reg = <0x80124000 0x1000>;
+ interrupts = <0 62 0x4>;
+ v-ape-supply = <&db8500_vape_reg>;
+ };
+
+ msp3: msp@80125000 {
+ compatible = "stericsson,ux500-msp-i2s";
+ reg = <0x80125000 0x1000>;
+ interrupts = <0 62 0x4>;
+ v-ape-supply = <&db8500_vape_reg>;
+ };
+
+ codec: ab8500-codec {
+ compatible = "stericsson,ab8500-codec";
+ stericsson,earpeice-cmv = <950>; /* Units in mV. */
+ };
diff --git a/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
new file mode 100644
index 000000000000..5feef1ef167d
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
@@ -0,0 +1,17 @@
+VIA/Wondermedia VT8500 UART Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-uart"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : UART interrupt
+- clocks : phandle to the uart source clock (usually a 24Mhz fixed clock)
+
+Example:
+
+ uart@d8210000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8210000 0x1040>;
+ interrupts = <47>;
+ clocks = <&ref24>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt b/Documentation/devicetree/bindings/usb/platform-uhci.txt
index 91477d6830ec..a4fb0719d157 100644
--- a/Documentation/devicetree/bindings/usb/platform-uhci.txt
+++ b/Documentation/devicetree/bindings/usb/platform-uhci.txt
@@ -1,12 +1,15 @@
-Generic Platform UHCI controllers.
+Generic Platform UHCI Controller
+-----------------------------------------------------
Required properties:
- - compatible: Should be "platform-uhci".
- - reg: Address range of the uhci registers
- - interrupts: Should contain the uhci interrupt.
+- compatible : "platform-uhci"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : UHCI controller interrupt
-usb: uhci@D8007301 {
- compatible = "platform-uhci", "usb-uhci";
- reg = <0xD8007301 0x200>;
- interrupts = <0>;
-};
+Example:
+
+ uhci@d8007b00 {
+ compatible = "platform-uhci";
+ reg = <0xd8007b00 0x200>;
+ interrupts = <43>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
new file mode 100644
index 000000000000..17b3ad1d97e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 EHCI Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-ehci"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : ehci controller interrupt
+
+Example:
+
+ ehci@d8007900 {
+ compatible = "via,vt8500-ehci";
+ reg = <0xd8007900 0x200>;
+ interrupts = <43>;
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4f293e5571f0..9de2b9ff9d6e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -48,5 +48,7 @@ sirf SiRF Technology, Inc.
st STMicroelectronics
stericsson ST-Ericsson
ti Texas Instruments
+via VIA Technologies, Inc.
wlf Wolfson Microelectronics
+wm Wondermedia Technologies, Inc.
xlnx Xilinx
diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
new file mode 100644
index 000000000000..c870b6478ec8
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
@@ -0,0 +1,62 @@
+VIA VT8500 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-fb"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : framebuffer controller interrupt
+- display: a phandle pointing to the display node
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+ This should be in the board dts.
+- default-mode: a videomode within the display with timing parameters
+ as specified below.
+
+Example:
+
+ fb@d800e400 {
+ compatible = "via,vt8500-fb";
+ reg = <0xd800e400 0x400>;
+ interrupts = <12>;
+ display = <&display>;
+ default-mode = <&mode0>;
+ };
+
+VIA VT8500 Display
+-----------------------------------------------------
+Required properties (as per of_videomode_helper):
+
+ - hactive, vactive: Display resolution
+ - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
+ in pixels
+ vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
+ lines
+ - clock: displayclock in Hz
+ - bpp: lcd panel bit-depth.
+ <16> for RGB565, <32> for RGB888
+
+Optional properties (as per of_videomode_helper):
+ - width-mm, height-mm: Display dimensions in mm
+ - hsync-active-high (bool): Hsync pulse is active high
+ - vsync-active-high (bool): Vsync pulse is active high
+ - interlaced (bool): This is an interlaced mode
+ - doublescan (bool): This is a doublescan mode
+
+Example:
+ display: display@0 {
+ modes {
+ mode0: mode@0 {
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hfront-porch = <40>;
+ hsync-len = <0>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <1>;
+ clock = <0>; /* unused but required */
+ bpp = <16>; /* non-standard but required */
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
new file mode 100644
index 000000000000..a850fa011f02
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
@@ -0,0 +1,13 @@
+VIA/Wondermedia Graphics Engine Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,prizm-ge-rops"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+ ge_rops@d8050400 {
+ compatible = "wm,prizm-ge-rops";
+ reg = <0xd8050400 0x100>;
+ };
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
new file mode 100644
index 000000000000..3d325e1d11ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -0,0 +1,23 @@
+Wondermedia WM8505 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,wm8505-fb"
+- reg : Should contain 1 register ranges(address and length)
+- via,display: a phandle pointing to the display node
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+ This should be in the board dts. See definition in
+ Documentation/devicetree/bindings/video/via,vt8500-fb.txt
+- default-mode: a videomode node as specified in
+ Documentation/devicetree/bindings/video/via,vt8500-fb.txt
+
+Example:
+
+ fb@d8050800 {
+ compatible = "wm,wm8505-fb";
+ reg = <0xd8050800 0x200>;
+ display = <&display>;
+ default-mode = <&mode0>;
+ };