diff options
author | Ingo Molnar <mingo@elte.hu> | 2008-07-16 13:11:29 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2008-07-16 13:11:29 +0200 |
commit | 77e442461c74068217b59b356cf18992c78ed896 (patch) | |
tree | 70f62a16bc6a81b63768279c9b40645d8f4dd4ff /Documentation | |
parent | d54191b85e294c46f05a2249b1f55ae54930bcc7 (diff) | |
parent | 45158894d4d6704afbb4cefe55e5f6ca279fe12a (diff) |
Merge branch 'linus' into x86/kprobes
Diffstat (limited to 'Documentation')
50 files changed, 2120 insertions, 1497 deletions
diff --git a/Documentation/IRQ-affinity.txt b/Documentation/IRQ-affinity.txt index 938d7dd05490..b4a615b78403 100644 --- a/Documentation/IRQ-affinity.txt +++ b/Documentation/IRQ-affinity.txt @@ -1,17 +1,26 @@ +ChangeLog: + Started by Ingo Molnar <mingo@redhat.com> + Update by Max Krasnyansky <maxk@qualcomm.com> -SMP IRQ affinity, started by Ingo Molnar <mingo@redhat.com> - +SMP IRQ affinity /proc/irq/IRQ#/smp_affinity specifies which target CPUs are permitted for a given IRQ source. It's a bitmask of allowed CPUs. It's not allowed to turn off all CPUs, and if an IRQ controller does not support IRQ affinity then the value will not change from the default 0xffffffff. +/proc/irq/default_smp_affinity specifies default affinity mask that applies +to all non-active IRQs. Once IRQ is allocated/activated its affinity bitmask +will be set to the default mask. It can then be changed as described above. +Default mask is 0xffffffff. + Here is an example of restricting IRQ44 (eth1) to CPU0-3 then restricting -the IRQ to CPU4-7 (this is an 8-CPU SMP box): +it to CPU4-7 (this is an 8-CPU SMP box): +[root@moon 44]# cd /proc/irq/44 [root@moon 44]# cat smp_affinity ffffffff + [root@moon 44]# echo 0f > smp_affinity [root@moon 44]# cat smp_affinity 0000000f @@ -21,17 +30,27 @@ PING hell (195.4.7.3): 56 data bytes --- hell ping statistics --- 6029 packets transmitted, 6027 packets received, 0% packet loss round-trip min/avg/max = 0.1/0.1/0.4 ms -[root@moon 44]# cat /proc/interrupts | grep 44: - 44: 0 1785 1785 1783 1783 1 -1 0 IO-APIC-level eth1 +[root@moon 44]# cat /proc/interrupts | grep 'CPU\|44:' + CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 + 44: 1068 1785 1785 1783 0 0 0 0 IO-APIC-level eth1 + +As can be seen from the line above IRQ44 was delivered only to the first four +processors (0-3). +Now lets restrict that IRQ to CPU(4-7). + [root@moon 44]# echo f0 > smp_affinity +[root@moon 44]# cat smp_affinity +000000f0 [root@moon 44]# ping -f h PING hell (195.4.7.3): 56 data bytes .. --- hell ping statistics --- 2779 packets transmitted, 2777 packets received, 0% packet loss round-trip min/avg/max = 0.1/0.5/585.4 ms -[root@moon 44]# cat /proc/interrupts | grep 44: - 44: 1068 1785 1785 1784 1784 1069 1070 1069 IO-APIC-level eth1 -[root@moon 44]# +[root@moon 44]# cat /proc/interrupts | 'CPU\|44:' + CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 + 44: 1068 1785 1785 1783 1784 1069 1070 1069 IO-APIC-level eth1 + +This time around IRQ44 was delivered only to the last four processors. +i.e counters for the CPU0-3 did not change. diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt index c64158ecde43..a6d32e65d222 100644 --- a/Documentation/RCU/NMI-RCU.txt +++ b/Documentation/RCU/NMI-RCU.txt @@ -93,6 +93,9 @@ Since NMI handlers disable preemption, synchronize_sched() is guaranteed not to return until all ongoing NMI handlers exit. It is therefore safe to free up the handler's data as soon as synchronize_sched() returns. +Important note: for this to work, the architecture in question must +invoke irq_enter() and irq_exit() on NMI entry and exit, respectively. + Answer to Quick Quiz diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt index 39ad8f56783a..9f711d2df91b 100644 --- a/Documentation/RCU/RTFP.txt +++ b/Documentation/RCU/RTFP.txt @@ -52,6 +52,10 @@ of each iteration. Unfortunately, chaotic relaxation requires highly structured data, such as the matrices used in scientific programs, and is thus inapplicable to most data structures in operating-system kernels. +In 1992, Henry (now Alexia) Massalin completed a dissertation advising +parallel programmers to defer processing when feasible to simplify +synchronization. RCU makes extremely heavy use of this advice. + In 1993, Jacobson [Jacobson93] verbally described what is perhaps the simplest deferred-free technique: simply waiting a fixed amount of time before freeing blocks awaiting deferred free. Jacobson did not describe @@ -138,6 +142,13 @@ blocking in read-side critical sections appeared [PaulEMcKenney2006c], Robert Olsson described an RCU-protected trie-hash combination [RobertOlsson2006a]. +2007 saw the journal version of the award-winning RCU paper from 2006 +[ThomasEHart2007a], as well as a paper demonstrating use of Promela +and Spin to mechanically verify an optimization to Oleg Nesterov's +QRCU [PaulEMcKenney2007QRCUspin], a design document describing +preemptible RCU [PaulEMcKenney2007PreemptibleRCU], and the three-part +LWN "What is RCU?" series [PaulEMcKenney2007WhatIsRCUFundamentally, +PaulEMcKenney2008WhatIsRCUUsage, and PaulEMcKenney2008WhatIsRCUAPI]. Bibtex Entries @@ -202,6 +213,20 @@ Bibtex Entries ,Year="1991" } +@phdthesis{HMassalinPhD +,author="H. Massalin" +,title="Synthesis: An Efficient Implementation of Fundamental Operating +System Services" +,school="Columbia University" +,address="New York, NY" +,year="1992" +,annotation=" + Mondo optimizing compiler. + Wait-free stuff. + Good advice: defer work to avoid synchronization. +" +} + @unpublished{Jacobson93 ,author="Van Jacobson" ,title="Avoid Read-Side Locking Via Delayed Free" @@ -635,3 +660,86 @@ Revised: " } +@unpublished{PaulEMcKenney2007PreemptibleRCU +,Author="Paul E. McKenney" +,Title="The design of preemptible read-copy-update" +,month="October" +,day="8" +,year="2007" +,note="Available: +\url{http://lwn.net/Articles/253651/} +[Viewed October 25, 2007]" +,annotation=" + LWN article describing the design of preemptible RCU. +" +} + +######################################################################## +# +# "What is RCU?" LWN series. +# + +@unpublished{PaulEMcKenney2007WhatIsRCUFundamentally +,Author="Paul E. McKenney and Jonathan Walpole" +,Title="What is {RCU}, Fundamentally?" +,month="December" +,day="17" +,year="2007" +,note="Available: +\url{http://lwn.net/Articles/262464/} +[Viewed December 27, 2007]" +,annotation=" + Lays out the three basic components of RCU: (1) publish-subscribe, + (2) wait for pre-existing readers to complete, and (2) maintain + multiple versions. +" +} + +@unpublished{PaulEMcKenney2008WhatIsRCUUsage +,Author="Paul E. McKenney" +,Title="What is {RCU}? Part 2: Usage" +,month="January" +,day="4" +,year="2008" +,note="Available: +\url{http://lwn.net/Articles/263130/} +[Viewed January 4, 2008]" +,annotation=" + Lays out six uses of RCU: + 1. RCU is a Reader-Writer Lock Replacement + 2. RCU is a Restricted Reference-Counting Mechanism + 3. RCU is a Bulk Reference-Counting Mechanism + 4. RCU is a Poor Man's Garbage Collector + 5. RCU is a Way of Providing Existence Guarantees + 6. RCU is a Way of Waiting for Things to Finish +" +} + +@unpublished{PaulEMcKenney2008WhatIsRCUAPI +,Author="Paul E. McKenney" +,Title="{RCU} part 3: the {RCU} {API}" +,month="January" +,day="17" +,year="2008" +,note="Available: +\url{http://lwn.net/Articles/264090/} +[Viewed January 10, 2008]" +,annotation=" + Gives an overview of the Linux-kernel RCU API and a brief annotated RCU + bibliography. +" +} + +@article{DinakarGuniguntala2008IBMSysJ +,author="D. Guniguntala and P. E. McKenney and J. Triplett and J. Walpole" +,title="The read-copy-update mechanism for supporting real-time applications on shared-memory multiprocessor systems with {Linux}" +,Year="2008" +,Month="April" +,journal="IBM Systems Journal" +,volume="47" +,number="2" +,pages="@@-@@" +,annotation=" + RCU, realtime RCU, sleepable RCU, performance. +" +} diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index 42b01bc2e1b4..cf5562cbe356 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -13,10 +13,13 @@ over a rather long period of time, but improvements are always welcome! detailed performance measurements show that RCU is nonetheless the right tool for the job. - The other exception would be where performance is not an issue, - and RCU provides a simpler implementation. An example of this - situation is the dynamic NMI code in the Linux 2.6 kernel, - at least on architectures where NMIs are rare. + Another exception is where performance is not an issue, and RCU + provides a simpler implementation. An example of this situation + is the dynamic NMI code in the Linux 2.6 kernel, at least on + architectures where NMIs are rare. + + Yet another exception is where the low real-time latency of RCU's + read-side primitives is critically important. 1. Does the update code have proper mutual exclusion? @@ -39,9 +42,10 @@ over a rather long period of time, but improvements are always welcome! 2. Do the RCU read-side critical sections make proper use of rcu_read_lock() and friends? These primitives are needed - to suppress preemption (or bottom halves, in the case of - rcu_read_lock_bh()) in the read-side critical sections, - and are also an excellent aid to readability. + to prevent grace periods from ending prematurely, which + could result in data being unceremoniously freed out from + under your read-side code, which can greatly increase the + actuarial risk of your kernel. As a rough rule of thumb, any dereference of an RCU-protected pointer must be covered by rcu_read_lock() or rcu_read_lock_bh() @@ -54,15 +58,30 @@ over a rather long period of time, but improvements are always welcome! be running while updates are in progress. There are a number of ways to handle this concurrency, depending on the situation: - a. Make updates appear atomic to readers. For example, + a. Use the RCU variants of the list and hlist update + primitives to add, remove, and replace elements on an + RCU-protected list. Alternatively, use the RCU-protected + trees that have been added to the Linux kernel. + + This is almost always the best approach. + + b. Proceed as in (a) above, but also maintain per-element + locks (that are acquired by both readers and writers) + that guard per-element state. Of course, fields that + the readers refrain from accessing can be guarded by the + update-side lock. + + This works quite well, also. + + c. Make updates appear atomic to readers. For example, pointer updates to properly aligned fields will appear atomic, as will individual atomic primitives. Operations performed under a lock and sequences of multiple atomic primitives will -not- appear to be atomic. - This is almost always the best approach. + This can work, but is starting to get a bit tricky. - b. Carefully order the updates and the reads so that + d. Carefully order the updates and the reads so that readers see valid data at all phases of the update. This is often more difficult than it sounds, especially given modern CPUs' tendency to reorder memory references. @@ -123,18 +142,22 @@ over a rather long period of time, but improvements are always welcome! when publicizing a pointer to a structure that can be traversed by an RCU read-side critical section. -5. If call_rcu(), or a related primitive such as call_rcu_bh(), - is used, the callback function must be written to be called - from softirq context. In particular, it cannot block. +5. If call_rcu(), or a related primitive such as call_rcu_bh() or + call_rcu_sched(), is used, the callback function must be + written to be called from softirq context. In particular, + it cannot block. 6. Since synchronize_rcu() can block, it cannot be called from - any sort of irq context. + any sort of irq context. Ditto for synchronize_sched() and + synchronize_srcu(). 7. If the updater uses call_rcu(), then the corresponding readers must use rcu_read_lock() and rcu_read_unlock(). If the updater uses call_rcu_bh(), then the corresponding readers must use - rcu_read_lock_bh() and rcu_read_unlock_bh(). Mixing things up - will result in confusion and broken kernels. + rcu_read_lock_bh() and rcu_read_unlock_bh(). If the updater + uses call_rcu_sched(), then the corresponding readers must + disable preemption. Mixing things up will result in confusion + and broken kernels. One exception to this rule: rcu_read_lock() and rcu_read_unlock() may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh() @@ -143,9 +166,9 @@ over a rather long period of time, but improvements are always welcome! such cases is a must, of course! And the jury is still out on whether the increased speed is worth it. -8. Although synchronize_rcu() is a bit slower than is call_rcu(), - it usually results in simpler code. So, unless update - performance is critically important or the updaters cannot block, +8. Although synchronize_rcu() is slower than is call_rcu(), it + usually results in simpler code. So, unless update performance + is critically important or the updaters cannot block, synchronize_rcu() should be used in preference to call_rcu(). An especially important property of the synchronize_rcu() @@ -187,23 +210,23 @@ over a rather long period of time, but improvements are always welcome! number of updates per grace period. 9. All RCU list-traversal primitives, which include - list_for_each_rcu(), list_for_each_entry_rcu(), + rcu_dereference(), list_for_each_rcu(), list_for_each_entry_rcu(), list_for_each_continue_rcu(), and list_for_each_safe_rcu(), - must be within an RCU read-side critical section. RCU + must be either within an RCU read-side critical section or + must be protected by appropriate update-side locks. RCU read-side critical sections are delimited by rcu_read_lock() and rcu_read_unlock(), or by similar primitives such as rcu_read_lock_bh() and rcu_read_unlock_bh(). - Use of the _rcu() list-traversal primitives outside of an - RCU read-side critical section causes no harm other than - a slight performance degradation on Alpha CPUs. It can - also be quite helpful in reducing code bloat when common - code is shared between readers and updaters. + The reason that it is permissible to use RCU list-traversal + primitives when the update-side lock is held is that doing so + can be quite helpful in reducing code bloat when common code is + shared between readers and updaters. 10. Conversely, if you are in an RCU read-side critical section, - you -must- use the "_rcu()" variants of the list macros. - Failing to do so will break Alpha and confuse people reading - your code. + and you don't hold the appropriate update-side lock, you -must- + use the "_rcu()" variants of the list macros. Failing to do so + will break Alpha and confuse people reading your code. 11. Note that synchronize_rcu() -only- guarantees to wait until all currently executing rcu_read_lock()-protected RCU read-side @@ -230,6 +253,14 @@ over a rather long period of time, but improvements are always welcome! must use whatever locking or other synchronization is required to safely access and/or modify that data structure. + RCU callbacks are -usually- executed on the same CPU that executed + the corresponding call_rcu(), call_rcu_bh(), or call_rcu_sched(), + but are by -no- means guaranteed to be. For example, if a given + CPU goes offline while having an RCU callback pending, then that + RCU callback will execute on some surviving CPU. (If this was + not the case, a self-spawning RCU callback would prevent the + victim CPU from ever going offline.) + 14. SRCU (srcu_read_lock(), srcu_read_unlock(), and synchronize_srcu()) may only be invoked from process context. Unlike other forms of RCU, it -is- permissible to block in an SRCU read-side critical diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt index 2967a65269d8..a342b6e1cc10 100644 --- a/Documentation/RCU/torture.txt +++ b/Documentation/RCU/torture.txt @@ -10,23 +10,30 @@ status messages via printk(), which can be examined via the dmesg command (perhaps grepping for "torture"). The test is started when the module is loaded, and stops when the module is unloaded. -However, actually setting this config option to "y" results in the system -running the test immediately upon boot, and ending only when the system -is taken down. Normally, one will instead want to build the system -with CONFIG_RCU_TORTURE_TEST=m and to use modprobe and rmmod to control -the test, perhaps using a script similar to the one shown at the end of -this document. Note that you will need CONFIG_MODULE_UNLOAD in order -to be able to end the test. +CONFIG_RCU_TORTURE_TEST_RUNNABLE + +It is also possible to specify CONFIG_RCU_TORTURE_TEST=y, which will +result in the tests being loaded into the base kernel. In this case, +the CONFIG_RCU_TORTURE_TEST_RUNNABLE config option is used to specify +whether the RCU torture tests are to be started immediately during +boot or whether the /proc/sys/kernel/rcutorture_runnable file is used +to enable them. This /proc file can be used to repeatedly pause and +restart the tests, regardless of the initial state specified by the +CONFIG_RCU_TORTURE_TEST_RUNNABLE config option. + +You will normally -not- want to start the RCU torture tests during boot +(and thus the default is CONFIG_RCU_TORTURE_TEST_RUNNABLE=n), but doing +this can sometimes be useful in finding boot-time bugs. MODULE PARAMETERS This module has the following parameters: -nreaders This is the number of RCU reading threads supported. - The default is twice the number of CPUs. Why twice? - To properly exercise RCU implementations with preemptible - read-side critical sections. +irqreaders Says to invoke RCU readers from irq level. This is currently + done via timers. Defaults to "1" for variants of RCU that + permit this. (Or, more accurately, variants of RCU that do + -not- permit this know to ignore this variable.) nfakewriters This is the number of RCU fake writer threads to run. Fake writer threads repeatedly use the synchronous "wait for @@ -37,6 +44,16 @@ nfakewriters This is the number of RCU fake writer threads to run. Fake to trigger special cases caused by multiple writers, such as the synchronize_srcu() early return optimization. +nreaders This is the number of RCU reading threads supported. + The default is twice the number of CPUs. Why twice? + To properly exercise RCU implementations with preemptible + read-side critical sections. + +shuffle_interval + The number of seconds to keep the test threads affinitied + to a particular subset of the CPUs, defaults to 3 seconds. + Used in conjunction with test_no_idle_hz. + stat_interval The number of seconds between output of torture statistics (via printk()). Regardless of the interval, statistics are printed when the module is unloaded. @@ -44,10 +61,11 @@ stat_interval The number of seconds between output of torture be printed -only- when the module is unloaded, and this is the default. -shuffle_interval - The number of seconds to keep the test threads affinitied - to a particular subset of the CPUs, defaults to 5 seconds. - Used in conjunction with test_no_idle_hz. +stutter The length of time to run the test before pausing for this + same period of time. Defaults to "stutter=5", so as + to run and pause for (roughly) five-second intervals. + Specifying "stutter=0" causes the test to run continuously + without pausing, which is the old default behavior. test_no_idle_hz Whether or not to test the ability of RCU to operate in a kernel that disables the scheduling-clock interrupt to diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index e0d6d99b8f9b..e04d643a9f57 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -1,3 +1,11 @@ +Please note that the "What is RCU?" LWN series is an excellent place +to start learning about RCU: + +1. What is RCU, Fundamentally? http://lwn.net/Articles/262464/ +2. What is RCU? Part 2: Usage http://lwn.net/Articles/263130/ +3. RCU part 3: the RCU API http://lwn.net/Articles/264090/ + + What is RCU? RCU is a synchronization mechanism that was added to the Linux kernel @@ -772,26 +780,18 @@ Linux-kernel source code, but it helps to have a full list of the APIs, since there does not appear to be a way to categorize them in docbook. Here is the list, by category. -Markers for RCU read-side critical sections: - - rcu_read_lock - rcu_read_unlock - rcu_read_lock_bh - rcu_read_unlock_bh - srcu_read_lock - srcu_read_unlock - RCU pointer/list traversal: rcu_dereference + list_for_each_entry_rcu + hlist_for_each_entry_rcu + list_for_each_rcu (to be deprecated in favor of list_for_each_entry_rcu) - list_for_each_entry_rcu list_for_each_continue_rcu (to be deprecated in favor of new list_for_each_entry_continue_rcu) - hlist_for_each_entry_rcu -RCU pointer update: +RCU pointer/list update: rcu_assign_pointer list_add_rcu @@ -799,16 +799,36 @@ RCU pointer update: list_del_rcu list_replace_rcu hlist_del_rcu + hlist_add_after_rcu + hlist_add_before_rcu hlist_add_head_rcu + hlist_replace_rcu + list_splice_init_rcu() -RCU grace period: +RCU: Critical sections Grace period Barrier + + rcu_read_lock synchronize_net rcu_barrier + rcu_read_unlock synchronize_rcu + call_rcu + + +bh: Critical sections Grace period Barrier + + rcu_read_lock_bh call_rcu_bh rcu_barrier_bh + rcu_read_unlock_bh + + +sched: Critical sections Grace period Barrier + + [preempt_disable] synchronize_sched rcu_barrier_sched + [and friends] call_rcu_sched + + +SRCU: Critical sections Grace period Barrier + + srcu_read_lock synchronize_srcu N/A + srcu_read_unlock - synchronize_net - synchronize_sched - synchronize_rcu - synchronize_srcu - call_rcu - call_rcu_bh See the comment headers in the source code (or the docbook generated from them) for more information. diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index b61cb9564023..bd699da24666 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -14,9 +14,8 @@ represent the thread siblings to cpu X in the same physical package; To implement it in an architecture-neutral way, a new source file, drivers/base/topology.c, is to export the 4 attributes. -If one architecture wants to support this feature, it just needs to -implement 4 defines, typically in file include/asm-XXX/topology.h. -The 4 defines are: +For an architecture to support this feature, it must define some of +these macros in include/asm-XXX/topology.h: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) #define topology_thread_siblings(cpu) @@ -25,17 +24,10 @@ The 4 defines are: The type of **_id is int. The type of siblings is cpumask_t. -To be consistent on all architectures, the 4 attributes should have -default values if their values are unavailable. Below is the rule. -1) physical_package_id: If cpu has no physical package id, -1 is the -default value. -2) core_id: If cpu doesn't support multi-core, its core id is 0. -3) thread_siblings: Just include itself, if the cpu doesn't support -HT/multi-thread. -4) core_siblings: Just include itself, if the cpu doesn't support -multi-core and HT/Multi-thread. - -So be careful when declaring the 4 defines in include/asm-XXX/topology.h. - -If an attribute isn't defined on an architecture, it won't be exported. - +To be consistent on all architectures, include/linux/topology.h +provides default definitions for any of the above macros that are +not defined by include/asm-XXX/topology.h: +1) physical_package_id: -1 +2) core_id: 0 +3) thread_siblings: just the given CPU +4) core_siblings: just the given CPU diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 46ece3fba6f9..65a1482457a8 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -222,13 +222,6 @@ Who: Thomas Gleixner <tglx@linutronix.de> --------------------------- -What: i2c-i810, i2c-prosavage and i2c-savage4 -When: May 2008 -Why: These drivers are superseded by i810fb, intelfb and savagefb. -Who: Jean Delvare <khali@linux-fr.org> - ---------------------------- - What (Why): - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files (superseded by xt_TOS/xt_tos target & match) diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 0c5086db8352..80e193d82e2e 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -13,72 +13,93 @@ Mailing list: linux-ext4@vger.kernel.org 1. Quick usage instructions: =========================== - - Grab updated e2fsprogs from - ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs-interim/ - This is a patchset on top of e2fsprogs-1.39, which can be found at + - Compile and install the latest version of e2fsprogs (as of this + writing version 1.41) from: + + http://sourceforge.net/project/showfiles.php?group_id=2406 + + or + ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/ - - It's still mke2fs -j /dev/hda1 + or grab the latest git repository from: + + git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git + + - Create a new filesystem using the ext4dev filesystem type: + + # mke2fs -t ext4dev /dev/hda1 + + Or configure an existing ext3 filesystem to support extents and set + the test_fs flag to indicate that it's ok for an in-development + filesystem to touch this filesystem: - - mount /dev/hda1 /wherever -t ext4dev + # tune2fs -O extents -E test_fs /dev/hda1 - - To enable extents, + If the filesystem was created with 128 byte inodes, it can be + converted to use 256 byte for greater efficiency via: - mount /dev/hda1 /wherever -t ext4dev -o extents + # tune2fs -I 256 /dev/hda1 - - The filesystem is compatible with the ext3 driver until you add a file - which has extents (ie: `mount -o extents', then create a file). + (Note: we currently do not have tools to convert an ext4dev + filesystem back to ext3; so please do not do try this on production + filesystems.) - NOTE: The "extents" mount flag is temporary. It will soon go away and - extents will be enabled by the "-o extents" flag to mke2fs or tune2fs + - Mounting: + + # mount -t ext4dev /dev/hda1 /wherever - When comparing performance with other filesystems, remember that - ext3/4 by default offers higher data integrity guarantees than most. So - when comparing with a metadata-only journalling filesystem, use `mount -o - data=writeback'. And you might as well use `mount -o nobh' too along - with it. Making the journal larger than the mke2fs default often helps - performance with metadata-intensive workloads. + ext3/4 by default offers higher data integrity guarantees than most. + So when comparing with a metadata-only journalling filesystem, such + as ext3, use `mount -o data=writeback'. And you might as well use + `mount -o nobh' too along with it. Making the journal larger than + the mke2fs default often helps performance with metadata-intensive + workloads. 2. Features =========== 2.1 Currently available -* ability to use filesystems > 16TB +* ability to use filesystems > 16TB (e2fsprogs support not available yet) * extent format reduces metadata overhead (RAM, IO for access, transactions) * extent format more robust in face of on-disk corruption due to magics, * internal redunancy in tree - -2.1 Previously available, soon to be enabled by default by "mkefs.ext4": - -* dir_index and resize inode will be on by default -* large inodes will be used by default for fast EAs, nsec timestamps, etc +* improved file allocation (multi-block alloc) +* fix 32000 subdirectory limit +* nsec timestamps for mtime, atime, ctime, create time +* inode version field on disk (NFSv4, Lustre) +* reduced e2fsck time via uninit_bg feature +* journal checksumming for robustness, performance +* persistent file preallocation (e.g for streaming media, databases) +* ability to pack bitmaps and inode tables into larger virtual groups via the + flex_bg feature +* large file support +* Inode allocation using large virtual block groups via flex_bg +* delayed allocation +* large block (up to pagesize) support +* efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force + the ordering) 2.2 Candidate features for future inclusion -There are several under discussion, whether they all make it in is -partly a function of how much time everyone has to work on them: +* Online defrag (patches available but not well tested) +* reduced mke2fs time via lazy itable initialization in conjuction with + the uninit_bg feature (capability to do this is available in e2fsprogs + but a kernel thread to do lazy zeroing of unused inode table blocks + after filesystem is first mounted is required for safety) -* improved file allocation (multi-block alloc, delayed alloc; basically done) -* fix 32000 subdirectory limit (patch exists, needs some e2fsck work) -* nsec timestamps for mtime, atime, ctime, create time (patch exists, - needs some e2fsck work) -* inode version field on disk (NFSv4, Lustre; prototype exists) -* reduced mke2fs/e2fsck time via uninitialized groups (prototype exists) -* journal checksumming for robustness, performance (prototype exists) -* persistent file preallocation (e.g for streaming media, databases) +There are several others under discussion, whether they all make it in is +partly a function of how much time everyone has to work on them. Features like +metadata checksumming have been discussed and planned for a bit but no patches +exist yet so I'm not sure they're in the near-term roadmap. -Features like metadata checksumming have been discussed and planned for -a bit but no patches exist yet so I'm not sure they're in the near-term -roadmap. +The big performance win will come with mballoc, delalloc and flex_bg +grouping of bitmaps and inode tables. Some test results available here: -The big performance win will come with mballoc and delalloc. CFS has -been using mballoc for a few years already with Lustre, and IBM + Bull -did a lot of benchmarking on it. The reason it isn't in the first set of -patches is partly a manageability issue, and partly because it doesn't -directly affect the on-disk format (outside of much better allocation) -so it isn't critical to get into the first round of changes. I believe -Alex is working on a new set of patches right now. + - http://www.bullopensource.org/ext4/20080530/ffsb-write-2.6.26-rc2.html + - http://www.bullopensource.org/ext4/20080530/ffsb-readwrite-2.6.26-rc2.html 3. Options ========== @@ -222,9 +243,11 @@ stripe=n Number of filesystem blocks that mballoc will try to use for allocation size and alignment. For RAID5/6 systems this should be the number of data disks * RAID chunk size in file system blocks. - +delalloc (*) Deferring block allocation until write-out time. +nodelalloc Disable delayed allocation. Blocks are allocation + when data is copied from user to page cache. Data Mode ---------- +========= There are 3 different data modes: * writeback mode @@ -236,10 +259,10 @@ typically provide the best ext4 performance. * ordered mode In data=ordered mode, ext4 only officially journals metadata, but it logically -groups metadata and data blocks into a single unit called a transaction. When -it's time to write the new metadata out to disk, the associated data blocks -are written first. In general, this mode performs slightly slower than -writeback but significantly faster than journal mode. +groups metadata information related to data changes with the data blocks into a +single unit called a transaction. When it's time to write the new metadata +out to disk, the associated data blocks are written first. In general, +this mode performs slightly slower than writeback but significantly faster than journal mode. * journal mode data=journal mode provides full data and metadata journaling. All new data is @@ -247,7 +270,8 @@ written to the journal first, and then to its final location. In the event of a crash, the journal can be replayed, bringing both data and metadata into a consistent state. This mode is the slowest except when data needs to be read from and written to disk at the same time where it -outperforms all others modes. +outperforms all others modes. Curently ext4 does not have delayed +allocation support if this data journalling mode is selected. References ========== @@ -256,7 +280,8 @@ kernel source: <file:fs/ext4/> <file:fs/jbd2/> programs: http://e2fsprogs.sourceforge.net/ - http://ext2resize.sourceforge.net useful links: http://fedoraproject.org/wiki/ext3-devel http://www.bullopensource.org/ext4/ + http://ext4.wiki.kernel.org/index.php/Main_Page + http://fedoraproject.org/wiki/Features/Ext4 diff --git a/Documentation/filesystems/gfs2-glocks.txt b/Documentation/filesystems/gfs2-glocks.txt new file mode 100644 index 000000000000..4dae9a3840bf --- /dev/null +++ b/Documentation/filesystems/gfs2-glocks.txt @@ -0,0 +1,114 @@ + Glock internal locking rules + ------------------------------ + +This documents the basic principles of the glock state machine +internals. Each glock (struct gfs2_glock in fs/gfs2/incore.h) +has two main (internal) locks: + + 1. A spinlock (gl_spin) which protects the internal state such + as gl_state, gl_target and the list of holders (gl_holders) + 2. A non-blocking bit lock, GLF_LOCK, which is used to prevent other + threads from making calls to the DLM, etc. at the same time. If a + thread takes this lock, it must then call run_queue (usually via the + workqueue) when it releases it in order to ensure any pending tasks + are completed. + +The gl_holders list contains all the queued lock requests (not +just the holders) associated with the glock. If there are any +held locks, then they will be contiguous entries at the head +of the list. Locks are granted in strictly the order that they +are queued, except for those marked LM_FLAG_PRIORITY which are +used only during recovery, and even then only for journal locks. + +There are three lock states that users of the glock layer can request, +namely shared (SH), deferred (DF) and exclusive (EX). Those translate +to the following DLM lock modes: + +Glock mode | DLM lock mode +------------------------------ + UN | IV/NL Unlocked (no DLM lock associated with glock) or NL + SH | PR (Protected read) + DF | CW (Concurrent write) + EX | EX (Exclusive) + +Thus DF is basically a shared mode which is incompatible with the "normal" +shared lock mode, SH. In GFS2 the DF mode is used exclusively for direct I/O +operations. The glocks are basically a lock plus some routines which deal +with cache management. The following rules apply for the cache: + +Glock mode | Cache data | Cache Metadata | Dirty Data | Dirty Metadata +-------------------------------------------------------------------------- + UN | No | No | No | No + SH | Yes | Yes | No | No + DF | No | Yes | No | No + EX | Yes | Yes | Yes | Yes + +These rules are implemented using the various glock operations which +are defined for each type of glock. Not all types of glocks use +all the modes. Only inode glocks use the DF mode for example. + +Table of glock operations and per type constants: + +Field | Purpose +---------------------------------------------------------------------------- +go_xmote_th | Called before remote state change (e.g. to sync dirty data) +go_xmote_bh | Called after remote state change (e.g. to refill cache) +go_inval | Called if remote state change requires invalidating the cache +go_demote_ok | Returns boolean value of whether its ok to demote a glock + | (e.g. checks timeout, and that there is no cached data) +go_lock | Called for the first local holder of a lock +go_unlock | Called on the final local unlock of a lock +go_dump | Called to print content of object for debugfs file, or on + | error to dump glock to the log. +go_type; | The type of the glock, LM_TYPE_..... +go_min_hold_time | The minimum hold time + +The minimum hold time for each lock is the time after a remote lock +grant for which we ignore remote demote requests. This is in order to +prevent a situation where locks are being bounced around the cluster +from node to node with none of the nodes making any progress. This +tends to show up most with shared mmaped files which are being written +to by multiple nodes. By delaying the demotion in response to a +remote callback, that gives the userspace program time to make +some progress before the pages are unmapped. + +There is a plan to try and remove the go_lock and go_unlock callbacks +if possible, in order to try and speed up the fast path though the locking. +Also, eventually we hope to make the glock "EX" mode locally shared +such that any local locking will be done with the i_mutex as required +rather than via the glock. + +Locking rules for glock operations: + +Operation | GLF_LOCK bit lock held | gl_spin spinlock held +----------------------------------------------------------------- +go_xmote_th | Yes | No +go_xmote_bh | Yes | No +go_inval | Yes | No +go_demote_ok | Sometimes | Yes +go_lock | Yes | No +go_unlock | Yes | No +go_dump | Sometimes | Yes + +N.B. Operations must not drop either the bit lock or the spinlock +if its held on entry. go_dump and do_demote_ok must never block. +Note that go_dump will only be called if the glock's state +indicates that it is caching uptodate data. + +Glock locking order within GFS2: + + 1. i_mutex (if required) + 2. Rename glock (for rename only) + 3. Inode glock(s) + (Parents before children, inodes at "same level" with same parent in + lock number order) + 4. Rgrp glock(s) (for (de)allocation operations) + 5. Transaction glock (via gfs2_trans_begin) for non-read operations + 6. Page lock (always last, very important!) + +There are two glocks per inode. One deals with access to the inode +itself (locking order as above), and the other, known as the iopen +glock is used in conjunction with the i_nlink field in the inode to +determine the lifetime of the inode in question. Locking of inodes +is on a per-inode basis. Locking of rgrps is on a per rgrp basis. + diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index dbc3c6a3650f..7f268f327d75 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -380,28 +380,35 @@ i386 and x86_64 platforms support the new IRQ vector displays. Of some interest is the introduction of the /proc/irq directory to 2.4. It could be used to set IRQ to CPU affinity, this means that you can "hook" an IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the -irq subdir is one subdir for each IRQ, and one file; prof_cpu_mask +irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and +prof_cpu_mask. For example > ls /proc/irq/ 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask - 1 11 13 15 17 19 3 5 7 9 + 1 11 13 15 17 19 3 5 7 9 default_smp_affinity > ls /proc/irq/0/ smp_affinity -The contents of the prof_cpu_mask file and each smp_affinity file for each IRQ -is the same by default: +smp_affinity is a bitmask, in which you can specify which CPUs can handle the +IRQ, you can set it by doing: - > cat /proc/irq/0/smp_affinity - ffffffff + > echo 1 > /proc/irq/10/smp_affinity + +This means that only the first CPU will handle the IRQ, but you can also echo +5 which means that only the first and fourth CPU can handle the IRQ. -It's a bitmask, in which you can specify which CPUs can handle the IRQ, you can -set it by doing: +The contents of each smp_affinity file is the same by default: + + > cat /proc/irq/0/smp_affinity + ffffffff - > echo 1 > /proc/irq/prof_cpu_mask +The default_smp_affinity mask applies to all non-active IRQs, which are the +IRQs which have not yet been allocated/activated, and hence which lack a +/proc/irq/[0-9]* directory. -This means that only the first CPU will handle the IRQ, but you can also echo 5 -which means that only the first and fourth CPU can handle the IRQ. +prof_cpu_mask specifies which CPUs are to be profiled by the system wide +profiler. Default value is ffffffff (all cpus). The way IRQs are routed is handled by the IO-APIC, and it's Round Robin between all the CPUs which are allowed to handle it. As usual the kernel has diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 77d3faa1a611..f218f616ff6b 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -4,9 +4,10 @@ Copyright 2008 Red Hat Inc. Author: Steven Rostedt <srostedt@redhat.com> License: The GNU Free Documentation License, Version 1.2 -Reviewers: Elias Oltmanns and Randy Dunlap +Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, + John Kacur, and David Teigland. -Writen for: 2.6.26-rc8 linux-2.6-tip.git tip/tracing/ftrace branch +Written for: 2.6.27-rc1 Introduction ------------ @@ -18,10 +19,11 @@ issues that take place outside of user-space. Although ftrace is the function tracer, it also includes an infrastructure that allows for other types of tracing. Some of the -tracers that are currently in ftrace is a tracer to trace +tracers that are currently in ftrace include a tracer to trace context switches, the time it takes for a high priority task to run after it was woken up, the time interrupts are disabled, and -more. +more (ftrace allows for tracer plugins, which means that the list of +tracers can always grow). The File System @@ -35,6 +37,8 @@ To mount the debugfs system: # mkdir /debug # mount -t debugfs nodev /debug +(Note: it is more common to mount at /sys/kernel/debug, but for simplicity + this document will use /debug) That's it! (assuming that you have ftrace configured into your kernel) @@ -50,20 +54,19 @@ of ftrace. Here is a list of some of the key files: available_tracers : This holds the different types of tracers that have been compiled into the kernel. The tracers - listed here can be configured by echoing in their - name into current_tracer. + listed here can be configured by echoing their name + into current_tracer. tracing_enabled : This sets or displays whether the current_tracer is activated and tracing or not. Echo 0 into this - file to disable the tracer or 1 (or non-zero) to - enable it. + file to disable the tracer or 1 to enable it. trace : This file holds the output of the trace in a human readable - format. + format (described below). latency_trace : This file shows the same trace but the information is organized more to display possible latencies - in the system. + in the system (described below). trace_pipe : The output is the same as the "trace" file but this file is meant to be streamed with live tracing. @@ -75,7 +78,7 @@ of ftrace. Here is a list of some of the key files: file, it is consumed, and will not be read again with a sequential read. The "trace" and "latency_trace" files are static, and if the - tracer isn't adding more data, they will display + tracer is not adding more data, they will display the same information every time they are read. iter_ctrl : This file lets the user control the amount of data @@ -92,10 +95,10 @@ of ftrace. Here is a list of some of the key files: trace_entries : This sets or displays the number of trace entries each CPU buffer can hold. The tracer buffers - are the same size for each CPU, so care must be - taken when modifying the trace_entries. The trace - buffers are allocated in pages (blocks of memory that - the kernel uses for allocation, usually 4 KB in size). + are the same size for each CPU. The displayed number + is the size of the CPU buffer and not total size. The + trace buffers are allocated in pages (blocks of memory + that the kernel uses for allocation, usually 4 KB in size). Since each entry is smaller than a page, if the last allocated page has room for more entries than were requested, the rest of the page is used to allocate @@ -112,20 +115,19 @@ of ftrace. Here is a list of some of the key files: on specified CPUS. The format is a hex string representing the CPUS. - set_ftrace_filter : When dynamic ftrace is configured in, the - code is dynamically modified to disable calling - of the function profiler (mcount). This lets - tracing be configured in with practically no overhead - in performance. This also has a side effect of - enabling or disabling specific functions to be - traced. Echoing in names of functions into this - file will limit the trace to only these functions. - - set_ftrace_notrace: This has the opposite effect that - set_ftrace_filter has. Any function that is added - here will not be traced. If a function exists - in both set_ftrace_filter and set_ftrace_notrace, - the function will _not_ be traced. + set_ftrace_filter : When dynamic ftrace is configured in (see the + section below "dynamic ftrace"), the code is dynamically + modified (code text rewrite) to disable calling of the + function profiler (mcount). This lets tracing be configured + in with practically no overhead in performance. This also + has a side effect of enabling or disabling specific functions + to be traced. Echoing names of functions into this file + will limit the trace to only those functions. + + set_ftrace_notrace: This has an effect opposite to that of + set_ftrace_filter. Any function that is added here will not + be traced. If a function exists in both set_ftrace_filter + and set_ftrace_notrace, the function will _not_ be traced. available_filter_functions : When a function is encountered the first time by the dynamic tracer, it is recorded and @@ -133,32 +135,31 @@ of ftrace. Here is a list of some of the key files: lists the functions that have been recorded by the dynamic tracer and these functions can be used to set the ftrace filter by the above - "set_ftrace_filter" file. + "set_ftrace_filter" file. (See the section "dynamic ftrace" + below for more details). The Tracers ----------- -Here are the list of current tracers that can be configured. +Here is the list of current tracers that may be configured. ftrace - function tracer that uses mcount to trace all functions. - It is possible to filter out which functions that are - to be traced when dynamic ftrace is configured in. sched_switch - traces the context switches between tasks. - irqsoff - traces the areas that disable interrupts and saves off + irqsoff - traces the areas that disable interrupts and saves the trace with the longest max latency. See tracing_max_latency. When a new max is recorded, it replaces the old trace. It is best to view this - trace with the latency_trace file. + trace via the latency_trace file. - preemptoff - Similar to irqsoff but traces and records the time - preemption is disabled. + preemptoff - Similar to irqsoff but traces and records the amount of + time for which preemption is disabled. preemptirqsoff - Similar to irqsoff and preemptoff, but traces and - records the largest time irqs and/or preemption is - disabled. + records the largest time for which irqs and/or preemption + is disabled. wakeup - Traces and records the max latency that it takes for the highest priority task to get scheduled after @@ -171,13 +172,13 @@ Here are the list of current tracers that can be configured. Examples of using the tracer ---------------------------- -Here are typical examples of using the tracers with only controlling -them with the debugfs interface (without using any user-land utilities). +Here are typical examples of using the tracers when controlling them only +with the debugfs interface (without using any user-land utilities). Output format: -------------- -Here's an example of the output format of the file "trace" +Here is an example of the output format of the file "trace" -------- # tracer: ftrace @@ -189,14 +190,15 @@ Here's an example of the output format of the file "trace" bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput -------- -A header is printed with the trace that is represented. In this case -the tracer is "ftrace". Then a header showing the format. Task name -"bash", the task PID "4251", the CPU that it was running on +A header is printed with the tracer name that is represented by the trace. +In this case the tracer is "ftrace". Then a header showing the format. Task +name "bash", the task PID "4251", the CPU that it was running on "01", the timestamp in <secs>.<usecs> format, the function name that was traced "path_put" and the parent function that called this function -"path_walk". +"path_walk". The timestamp is the time at which the function was +entered. -The sched_switch tracer also includes tracing of task wake ups and +The sched_switch tracer also includes tracing of task wakeups and context switches. ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S @@ -206,7 +208,7 @@ context switches. kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R -Wake ups are represented by a "+" and the context switches show +Wake ups are represented by a "+" and the context switches are shown as "==>". The format is: Context switches: @@ -221,7 +223,7 @@ Wake ups are represented by a "+" and the context switches show <pid>:<prio>:<state> + <pid>:<prio>:<state> -The prio is the internal kernel priority, which is inverse to the +The prio is the internal kernel priority, which is the inverse of the priority that is usually displayed by user-space tools. Zero represents the highest priority (99). Prio 100 starts the "nice" priorities with 100 being equal to nice -20 and 139 being nice 19. The prio "140" is @@ -232,7 +234,7 @@ Latency trace format -------------------- For traces that display latency times, the latency_trace file gives -a bit more information to see why a latency happened. Here's a typical +somewhat more information to see why a latency happened. Here is a typical trace. # tracer: irqsoff @@ -260,21 +262,20 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 <idle>-0 0d.s1 98us : trace_hardirqs_on (do_softirq) -vim:ft=help - -This shows that the current tracer is "irqsoff" tracing the time -interrupts are disabled. It gives the trace version and the kernel -this was executed on (2.6.26-rc8). Then it displays the max latency -in microsecs (97 us). The number of trace entries displayed -by the total number recorded (both are three: #3/3). The type of +This shows that the current tracer is "irqsoff" tracing the time for which +interrupts were disabled. It gives the trace version and the version +of the kernel upon which this was executed on (2.6.26-rc8). Then it displays +the max latency in microsecs (97 us). The number of trace entries displayed +and the total number recorded (both are three: #3/3). The type of preemption that was used (PREEMPT). VP, KP, SP, and HP are always zero -and reserved for later use. #P is the number of online CPUS (#P:2). +and are reserved for later use. #P is the number of online CPUS (#P:2). -The task is the process that was running when the latency happened. +The task is the process that was running when the latency occurred. (swapper pid: 0). -The start and stop that caused the latencies: +The start and stop (the functions in which the interrupts were disabled and +enabled respectively) that caused the latencies: apic_timer_interrupt is where the interrupts were disabled. do_softirq is where they were enabled again. @@ -286,14 +287,14 @@ explains which is which. pid: The PID of that process. - CPU#: The CPU that the process was running on. + CPU#: The CPU which the process was running on. irqs-off: 'd' interrupts are disabled. '.' otherwise. need-resched: 'N' task need_resched is set, '.' otherwise. hardirq/softirq: - 'H' - hard irq happened inside a softirq. + 'H' - hard irq occurred inside a softirq. 'h' - hard irq is running 's' - soft irq is running '.' - normal context. @@ -303,7 +304,7 @@ explains which is which. The above is mostly meaningful for kernel developers. time: This differs from the trace file output. The trace file output - included an absolute timestamp. The timestamp used by the + includes an absolute timestamp. The timestamp used by the latency_trace file is relative to the start of the trace. delay: This is just to help catch your eye a bit better. And @@ -385,7 +386,7 @@ Here are the available options: sched_switch ------------ -This tracer simply records schedule switches. Here's an example +This tracer simply records schedule switches. Here is an example of how to use it. # echo sched_switch > /debug/tracing/current_tracer @@ -421,8 +422,8 @@ the name of the trace and points to the options. The "FUNCTION" is a misnomer since here it represents the wake ups and context switches. -The sched_switch only lists the wake ups (represented with '+') -and context switches ('==>') with the previous task or current +The sched_switch file only lists the wake ups (represented with '+') +and context switches ('==>') with the previous task or current task first followed by the next task or task waking up. The format for both of these is PID:KERNEL-PRIO:TASK-STATE. Remember that the KERNEL-PRIO is the inverse of the actual priority with zero (0) being the highest @@ -437,7 +438,8 @@ The task states are: R - running : wants to run, may not actually be running S - sleep : process is waiting to be woken up (handles signals) - D - deep sleep : process must be woken up (ignores signals) + D - disk sleep (uninterruptible sleep) : process must be woken up + (ignores signals) T - stopped : process suspended t - traced : process is being traced (with something like gdb) Z - zombie : process waiting to be cleaned up @@ -447,8 +449,8 @@ The task states are: ftrace_enabled -------------- -The following tracers give different output depending on whether -or not the sysctl ftrace_enabled is set. To set ftrace_enabled, +The following tracers (listed below) give different output depending +on whether or not the sysctl ftrace_enabled is set. To set ftrace_enabled, one can either use the sysctl function or set it via the proc file system interface. @@ -475,13 +477,12 @@ interrupt from triggering or the mouse interrupt from letting the kernel know of a new mouse event. The result is a latency with the reaction time. -The irqsoff tracer tracks the time interrupts are disabled to the time -they are re-enabled. When a new maximum latency is hit, it saves off -the trace so that it may be retrieved at a later time. Every time a -new maximum in reached, the old saved trace is discarded and the new -trace is saved. +The irqsoff tracer tracks the time for which interrupts are disabled. +When a new maximum latency is hit, the tracer saves the trace leading up +to that latency point so that every time a new maximum is reached, the old +saved trace is discarded and the new trace is saved. -To reset the maximum, echo 0 into tracing_max_latency. Here's an +To reset the maximum, echo 0 into tracing_max_latency. Here is an example: # echo irqsoff > /debug/tracing/current_tracer @@ -493,14 +494,14 @@ example: # cat /debug/tracing/latency_trace # tracer: irqsoff # -irqsoff latency trace v1.1.5 on 2.6.26-rc8 +irqsoff latency trace v1.1.5 on 2.6.26 -------------------------------------------------------------------- - latency: 6 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + latency: 12 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- - | task: bash-4269 (uid:0 nice:0 policy:0 rt_prio:0) + | task: bash-3730 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- - => started at: copy_page_range - => ended at: copy_page_range + => started at: sys_setpgid + => ended at: sys_setpgid # _------=> CPU# # / _-----=> irqs-off @@ -511,21 +512,19 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 # ||||| delay # cmd pid ||||| time | caller # \ / ||||| \ | / - bash-4269 1...1 0us+: _spin_lock (copy_page_range) - bash-4269 1...1 7us : _spin_unlock (copy_page_range) - bash-4269 1...2 7us : trace_preempt_on (copy_page_range) - + bash-3730 1d... 0us : _write_lock_irq (sys_setpgid) + bash-3730 1d..1 1us+: _write_unlock_irq (sys_setpgid) + bash-3730 1d..2 14us : trace_hardirqs_on (sys_setpgid) -vim:ft=help -Here we see that that we had a latency of 6 microsecs (which is -very good). The spin_lock in copy_page_range disabled interrupts. -The difference between the 6 and the displayed timestamp 7us is -because the clock must have incremented between the time of recording -the max latency and recording the function that had that latency. +Here we see that that we had a latency of 12 microsecs (which is +very good). The _write_lock_irq in sys_setpgid disabled interrupts. +The difference between the 12 and the displayed timestamp 14us occurred +because the clock was incremented between the time of recording the max +latency and the time of recording the function that had that latency. -Note the above had ftrace_enabled not set. If we set the ftrace_enabled, -we get a much larger output: +Note the above example had ftrace_enabled not set. If we set the +ftrace_enabled, we get a much larger output: # tracer: irqsoff # @@ -571,12 +570,10 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal) -vim:ft=help - Here we traced a 50 microsecond latency. But we also see all the functions that were called during that time. Note that by enabling -function tracing, we endure an added overhead. This overhead may +function tracing, we incur an added overhead. This overhead may extend the latency times. But nevertheless, this trace has provided some very helpful debugging information. @@ -590,8 +587,9 @@ for preemption to be enabled again before it can preempt a lower priority task. The preemptoff tracer traces the places that disable preemption. -Like the irqsoff, it records the maximum latency that preemption -was disabled. The control of preemptoff is much like the irqsoff. +Like the irqsoff tracer, it records the maximum latency for which preemption +was disabled. The control of preemptoff tracer is much like the irqsoff +tracer. # echo preemptoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -625,8 +623,6 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq) -vim:ft=help - This has some more changes. Preemption was disabled when an interrupt came in (notice the 'h'), and was enabled while doing a softirq. (notice the 's'). But we also see that interrupts have been disabled @@ -694,16 +690,16 @@ The above is an example of the preemptoff trace with ftrace_enabled set. Here we see that interrupts were disabled the entire time. The irq_enter code lets us know that we entered an interrupt 'h'. Before that, the functions being traced still show that it is not -in an interrupt, but we can see by the functions themselves that +in an interrupt, but we can see from the functions themselves that this is not the case. -Notice that the __do_softirq when called doesn't have a preempt_count. -It may seem that we missed a preempt enabled. What really happened -is that the preempt count is held on the threads stack and we +Notice that __do_softirq when called does not have a preempt_count. +It may seem that we missed a preempt enabling. What really happened +is that the preempt count is held on the thread's stack and we switched to the softirq stack (4K stacks in effect). The code does not copy the preempt count, but because interrupts are disabled, -we don't need to worry about it. Having a tracer like this is good -to let people know what really happens inside the kernel. +we do not need to worry about it. Having a tracer like this is good +for letting people know what really happens inside the kernel. preemptirqsoff @@ -713,7 +709,7 @@ Knowing the locations that have interrupts disabled or preemption disabled for the longest times is helpful. But sometimes we would like to know when either preemption and/or interrupts are disabled. -The following code: +Consider the following code: local_irq_disable(); call_function_with_irqs_off(); @@ -769,12 +765,10 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq) -vim:ft=help - The trace_hardirqs_off_thunk is called from assembly on x86 when interrupts are disabled in the assembly code. Without the function -tracing, we don't know if interrupts were enabled within the preemption +tracing, we do not know if interrupts were enabled within the preemption points. We do see that it started with preemption enabled. Here is a trace with ftrace_enabled set: @@ -865,19 +859,19 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 This is a very interesting trace. It started with the preemption of the ls task. We see that the task had the "need_resched" bit set -with the 'N' in the trace. Interrupts are disabled in the spin_lock -and the trace started. We see that a schedule took place to run +via the 'N' in the trace. Interrupts were disabled before the spin_lock +at the beginning of the trace. We see that a schedule took place to run sshd. When the interrupts were enabled, we took an interrupt. On return from the interrupt handler, the softirq ran. We took another -interrupt while running the softirq as we see with the capital 'H'. +interrupt while running the softirq as we see from the capital 'H'. wakeup ------ -In Real-Time environment it is very important to know the wakeup -time it takes for the highest priority task that wakes up to the -time it executes. This is also known as "schedule latency". +In a Real-Time environment it is very important to know the wakeup +time it takes for the highest priority task that is woken up to the +time that it executes. This is also known as "schedule latency". I stress the point that this is about RT tasks. It is also important to know the scheduling latency of non-RT tasks, but the average schedule latency is better for non-RT tasks. Tools like @@ -926,8 +920,6 @@ wakeup latency trace v1.1.5 on 2.6.26-rc8 <idle>-0 1d..4 4us : schedule (cpu_idle) -vim:ft=help - Running this on an idle system, we see that it only took 4 microseconds to perform the task switch. Note, since the trace marker in the @@ -996,15 +988,15 @@ ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock) ksoftirq-7 1d..4 50us : schedule (__cond_resched) The interrupt went off while running ksoftirqd. This task runs at -SCHED_OTHER. Why didn't we see the 'N' set early? This may be +SCHED_OTHER. Why did not we see the 'N' set early? This may be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K stacks -configured, the interrupt and softirq runs with their own stack. +configured, the interrupt and softirq run with their own stack. Some information is held on the top of the task's stack (need_resched and preempt_count are both stored there). The setting of the NEED_RESCHED bit is done directly to the task's stack, but the reading of the NEED_RESCHED is done by looking at the current stack, which in this case is the stack for the hard interrupt. This hides the fact that NEED_RESCHED -has been set. We don't see the 'N' until we switch back to the task's +has been set. We do not see the 'N' until we switch back to the task's assigned stack. ftrace @@ -1044,14 +1036,14 @@ this tracer is a nop. [...] -Note: It is sometimes better to enable or disable tracing directly from -a program, because the buffer may be overflowed by the echo commands -before you get to the point you want to trace. It is also easier to -stop the tracing at the point that you hit the part that you are -interested in. Since the ftrace buffer is a ring buffer with the -oldest data being overwritten, usually it is sufficient to start the -tracer with an echo command but have you code stop it. Something -like the following is usually appropriate for this. +Note: ftrace uses ring buffers to store the above entries. The newest data +may overwrite the oldest data. Sometimes using echo to stop the trace +is not sufficient because the tracing could have overwritten the data +that you wanted to record. For this reason, it is sometimes better to +disable tracing directly from a program. This allows you to stop the +tracing at the point that you hit the part that you are interested in. +To disable the tracing directly from a C program, something like following +code snippet can be used: int trace_fd; [...] @@ -1060,20 +1052,26 @@ int main(int argc, char *argv[]) { trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY); [...] if (condition_hit()) { - write(trace_fd, "0", 1); + write(trace_fd, "0", 1); } [...] } +Note: Here we hard coded the path name. The debugfs mount is not +guaranteed to be at /debug (and is more commonly at /sys/kernel/debug). +For simple one time traces, the above is sufficent. For anything else, +a search through /proc/mounts may be needed to find where the debugfs +file-system is mounted. dynamic ftrace -------------- -If CONFIG_DYNAMIC_FTRACE is set, then the system will run with +If CONFIG_DYNAMIC_FTRACE is set, the system will run with virtually no overhead when function tracing is disabled. The way this works is the mcount function call (placed at the start of every kernel function, produced by the -pg switch in gcc), starts -of pointing to a simple return. +of pointing to a simple return. (Enabling FTRACE will include the +-pg switch in the compiling of the kernel.) When dynamic ftrace is initialized, it calls kstop_machine to make the machine act like a uniprocessor so that it can freely modify code @@ -1086,15 +1084,15 @@ Later on the ftraced kernel thread is awoken and will again call kstop_machine if new functions have been recorded. The ftraced thread will change all calls to mcount to "nop". Just calling mcount and having mcount return has shown a 10% overhead. By converting -it to a nop, there is no recordable overhead to the system. +it to a nop, there is no measurable overhead to the system. One special side-effect to the recording of the functions being -traced, is that we can now selectively choose which functions we -want to trace and which ones we want the mcount calls to remain as +traced is that we can now selectively choose which functions we +wish to trace and which ones we want the mcount calls to remain as nops. Two files are used, one for enabling and one for disabling the tracing -of recorded functions. They are: +of specified functions. They are: set_ftrace_filter @@ -1116,7 +1114,7 @@ pick_next_task_fair mutex_lock [...] -If I'm only interested in sys_nanosleep and hrtimer_interrupt: +If I am only interested in sys_nanosleep and hrtimer_interrupt: # echo sys_nanosleep hrtimer_interrupt \ > /debug/tracing/set_ftrace_filter @@ -1133,21 +1131,21 @@ If I'm only interested in sys_nanosleep and hrtimer_interrupt: usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call <idle>-0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt -To see what functions are being traced, you can cat the file: +To see which functions are being traced, you can cat the file: # cat /debug/tracing/set_ftrace_filter hrtimer_interrupt sys_nanosleep -Perhaps this isn't enough. The filters also allow simple wild cards. +Perhaps this is not enough. The filters also allow simple wild cards. Only the following are currently available <match>* - will match functions that begin with <match> *<match> - will match functions that end with <match> *<match>* - will match functions that have <match> in it -Thats all the wild cards that are allowed. +These are the only wild cards which are supported. <match>*<match> will not work. @@ -1258,15 +1256,15 @@ calls that need to be converted into nops. If there are not any, then it simply goes back to sleep. But if there are some, it will call kstop_machine to convert the calls to nops. -There may be a case that you do not want this added latency. +There may be a case in which you do not want this added latency. Perhaps you are doing some audio recording and this activity might cause skips in the playback. There is an interface to disable -and enable the ftraced kernel thread. +and enable the "ftraced" kernel thread. # echo 0 > /debug/tracing/ftraced_enabled -This will disable the calling of the kstop_machine to update the -mcount calls to nops. Remember that there's a large overhead +This will disable the calling of kstop_machine to update the +mcount calls to nops. Remember that there is a large overhead to calling mcount. Without this kernel thread, that overhead will exist. @@ -1282,8 +1280,8 @@ that uses ftrace function recording. trace_pipe ---------- -The trace_pipe outputs the same as trace, but the effect on the -tracing is different. Every read from trace_pipe is consumed. +The trace_pipe outputs the same content as the trace file, but the effect +on the tracing is different. Every read from trace_pipe is consumed. This means that subsequent reads will be different. The trace is live. @@ -1313,7 +1311,7 @@ is live. bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up -Note, reading the trace_pipe will block until more input is added. +Note, reading the trace_pipe file will block until more input is added. By changing the tracer, trace_pipe will issue an EOF. We needed to set the ftrace tracer _before_ cating the trace_pipe file. @@ -1322,7 +1320,7 @@ trace entries ------------- Having too much or not enough data can be troublesome in diagnosing -some issue in the kernel. The file trace_entries is used to modify +an issue in the kernel. The file trace_entries is used to modify the size of the internal trace buffers. The number listed is the number of entries that can be recorded per CPU. To know the full size, multiply the number of possible CPUS with the @@ -1332,7 +1330,8 @@ number of entries. 65620 Note, to modify this, you must have tracing completely disabled. To do that, -echo "none" into the current_tracer. +echo "none" into the current_tracer. If the current_tracer is not set +to "none", an EINVAL error will be returned. # echo none > /debug/tracing/current_tracer # echo 100000 > /debug/tracing/trace_entries @@ -1341,18 +1340,18 @@ echo "none" into the current_tracer. Notice that we echoed in 100,000 but the size is 100,045. The entries -are held by individual pages. It allocates the number of pages it takes +are held in individual pages. It allocates the number of pages it takes to fulfill the request. If more entries may fit on the last page -it will add them. +then they will be added. # echo 1 > /debug/tracing/trace_entries # cat /debug/tracing/trace_entries 85 -This shows us that 85 entries can fit on a single page. +This shows us that 85 entries can fit in a single page. -The number of pages that will be allocated is a percentage of available -memory. Allocating too much will produce an error. +The number of pages which will be allocated is limited to a percentage +of available memory. Allocating too much will produce an error. # echo 1000000000000 > /debug/tracing/trace_entries -bash: echo: write error: Cannot allocate memory diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810 deleted file mode 100644 index 778210ee1583..000000000000 --- a/Documentation/i2c/busses/i2c-i810 +++ /dev/null @@ -1,47 +0,0 @@ -Kernel driver i2c-i810 - -Supported adapters: - * Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH) - * Intel 82845G (GMCH) - -Authors: - Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, - Kyösti Mälkki <kmalkki@cc.hut.fi>, - Ralph Metzler <rjkm@thp.uni-koeln.de>, - Mark D. Studebaker <mdsxyz123@yahoo.com> - -Main contact: Mark Studebaker <mdsxyz123@yahoo.com> - -Description ------------ - -WARNING: If you have an '810' or '815' motherboard, your standard I2C -temperature sensors are most likely on the 801's I2C bus. You want the -i2c-i801 driver for those, not this driver. - -Now for the i2c-i810... - -The GMCH chip contains two I2C interfaces. - -The first interface is used for DDC (Data Display Channel) which is a -serial channel through the VGA monitor connector to a DDC-compliant -monitor. This interface is defined by the Video Electronics Standards -Association (VESA). The standards are available for purchase at -http://www.vesa.org . - -The second interface is a general-purpose I2C bus. It may be connected to a -TV-out chip such as the BT869 or possibly to a digital flat-panel display. - -Features --------- - -Both busses use the i2c-algo-bit driver for 'bit banging' -and support for specific transactions is provided by i2c-algo-bit. - -Issues ------- - -If you enable bus testing in i2c-algo-bit (insmod i2c-algo-bit bit_test=1), -the test may fail; if so, the i2c-i810 driver won't be inserted. However, -we think this has been fixed. diff --git a/Documentation/i2c/busses/i2c-prosavage b/Documentation/i2c/busses/i2c-prosavage deleted file mode 100644 index 703687902511..000000000000 --- a/Documentation/i2c/busses/i2c-prosavage +++ /dev/null @@ -1,23 +0,0 @@ -Kernel driver i2c-prosavage - -Supported adapters: - - S3/VIA KM266/VT8375 aka ProSavage8 - S3/VIA KM133/VT8365 aka Savage4 - -Author: Henk Vergonet <henk@god.dyndns.org> - -Description ------------ - -The Savage4 chips contain two I2C interfaces (aka a I2C 'master' or -'host'). - -The first interface is used for DDC (Data Display Channel) which is a -serial channel through the VGA monitor connector to a DDC-compliant -monitor. This interface is defined by the Video Electronics Standards -Association (VESA). The standards are available for purchase at -http://www.vesa.org . The second interface is a general-purpose I2C bus. - -Usefull for gaining access to the TV Encoder chips. - diff --git a/Documentation/i2c/busses/i2c-savage4 b/Documentation/i2c/busses/i2c-savage4 deleted file mode 100644 index 6ecceab618d3..000000000000 --- a/Documentation/i2c/busses/i2c-savage4 +++ /dev/null @@ -1,26 +0,0 @@ -Kernel driver i2c-savage4 - -Supported adapters: - * Savage4 - * Savage2000 - -Authors: - Alexander Wold <awold@bigfoot.com>, - Mark D. Studebaker <mdsxyz123@yahoo.com> - -Description ------------ - -The Savage4 chips contain two I2C interfaces (aka a I2C 'master' -or 'host'). - -The first interface is used for DDC (Data Display Channel) which is a -serial channel through the VGA monitor connector to a DDC-compliant -monitor. This interface is defined by the Video Electronics Standards -Association (VESA). The standards are available for purchase at -http://www.vesa.org . The DDC bus is not yet supported because its register -is not directly memory-mapped. - -The second interface is a general-purpose I2C bus. This is the only -interface supported by the driver at the moment. - diff --git a/Documentation/i2c/fault-codes b/Documentation/i2c/fault-codes new file mode 100644 index 000000000000..045765c0b9b5 --- /dev/null +++ b/Documentation/i2c/fault-codes @@ -0,0 +1,127 @@ +This is a summary of the most important conventions for use of fault +codes in the I2C/SMBus stack. + + +A "Fault" is not always an "Error" +---------------------------------- +Not all fault reports imply errors; "page faults" should be a familiar +example. Software often retries idempotent operations after transient +faults. There may be fancier recovery schemes that are appropriate in +some cases, such as re-initializing (and maybe resetting). After such +recovery, triggered by a fault report, there is no error. + +In a similar way, sometimes a "fault" code just reports one defined +result for an operation ... it doesn't indicate that anything is wrong +at all, just that the outcome wasn't on the "golden path". + +In short, your I2C driver code may need to know these codes in order +to respond correctly. Other code may need to rely on YOUR code reporting +the right fault code, so that it can (in turn) behave correctly. + + +I2C and SMBus fault codes +------------------------- +These are returned as negative numbers from most calls, with zero or +some positive number indicating a non-fault return. The specific +numbers associated with these symbols differ between architectures, +though most Linux systems use <asm-generic/errno*.h> numbering. + +Note that the descriptions here are not exhaustive. There are other +codes that may be returned, and other cases where these codes should +be returned. However, drivers should not return other codes for these +cases (unless the hardware doesn't provide unique fault reports). + +Also, codes returned by adapter probe methods follow rules which are +specific to their host bus (such as PCI, or the platform bus). + + +EAGAIN + Returned by I2C adapters when they lose arbitration in master + transmit mode: some other master was transmitting different + data at the same time. + + Also returned when trying to invoke an I2C operation in an + atomic context, when some task is already using that I2C bus + to execute some other operation. + +EBADMSG + Returned by SMBus logic when an invalid Packet Error Code byte + is received. This code is a CRC covering all bytes in the + transaction, and is sent before the terminating STOP. This + fault is only reported on read transactions; the SMBus slave + may have a way to report PEC mismatches on writes from the + host. Note that even if PECs are in use, you should not rely + on these as the only way to detect incorrect data transfers. + +EBUSY + Returned by SMBus adapters when the bus was busy for longer + than allowed. This usually indicates some device (maybe the + SMBus adapter) needs some fault recovery (such as resetting), + or that the reset was attempted but failed. + +EINVAL + This rather vague error means an invalid parameter has been + detected before any I/O operation was started. Use a more + specific fault code when you can. + + One example would be a driver trying an SMBus Block Write + with block size outside the range of 1-32 bytes. + +EIO + This rather vague error means something went wrong when + performing an I/O operation. Use a more specific fault + code when you can. + +ENODEV + Returned by driver probe() methods. This is a bit more + specific than ENXIO, implying the problem isn't with the + address, but with the device found there. Driver probes + may verify the device returns *correct* responses, and + return this as appropriate. (The driver core will warn + about probe faults other than ENXIO and ENODEV.) + +ENOMEM + Returned by any component that can't allocate memory when + it needs to do so. + +ENXIO + Returned by I2C adapters to indicate that the address phase + of a transfer didn't get an ACK. While it might just mean + an I2C device was temporarily not responding, usually it + means there's nothing listening at that address. + + Returned by driver probe() methods to indicate that they + found no device to bind to. (ENODEV may also be used.) + +EOPNOTSUPP + Returned by an adapter when asked to perform an operation + that it doesn't, or can't, support. + + For example, this would be returned when an adapter that + doesn't support SMBus block transfers is asked to execute + one. In that case, the driver making that request should + have verified that functionality was supported before it + made that block transfer request. + + Similarly, if an I2C adapter can't execute all legal I2C + messages, it should return this when asked to perform a + transaction it can't. (These limitations can't be seen in + the adapter's functionality mask, since the assumption is + that if an adapter supports I2C it supports all of I2C.) + +EPROTO + Returned when slave does not conform to the relevant I2C + or SMBus (or chip-specific) protocol specifications. One + case is when the length of an SMBus block data response + (from the SMBus slave) is outside the range 1-32 bytes. + +ETIMEDOUT + This is returned by drivers when an operation took too much + time, and was aborted before it completed. + + SMBus adapters may return it when an operation took more + time than allowed by the SMBus specification; for example, + when a slave stretches clocks too far. I2C has no such + timeouts, but it's normal for I2C adapters to impose some + arbitrary limits (much longer than SMBus!) too. + diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol index 03f08fb491cc..24bfb65da17d 100644 --- a/Documentation/i2c/smbus-protocol +++ b/Documentation/i2c/smbus-protocol @@ -42,8 +42,8 @@ Count (8 bits): A data byte containing the length of a block operation. [..]: Data sent by I2C device, as opposed to data sent by the host adapter. -SMBus Quick Command: i2c_smbus_write_quick() -============================================= +SMBus Quick Command +=================== This sends a single bit to the device, at the place of the Rd/Wr bit. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index d4cd4126d1ad..6b61b3a2e90b 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -44,6 +44,10 @@ static struct i2c_driver foo_driver = { .id_table = foo_ids, .probe = foo_probe, .remove = foo_remove, + /* if device autodetection is needed: */ + .class = I2C_CLASS_SOMETHING, + .detect = foo_detect, + .address_data = &addr_data, /* else, driver uses "legacy" binding model: */ .attach_adapter = foo_attach_adapter, @@ -217,6 +221,31 @@ in the I2C bus driver. You may want to save the returned i2c_client reference for later use. +Device Detection (Standard driver model) +---------------------------------------- + +Sometimes you do not know in advance which I2C devices are connected to +a given I2C bus. This is for example the case of hardware monitoring +devices on a PC's SMBus. In that case, you may want to let your driver +detect supported devices automatically. This is how the legacy model +was working, and is now available as an extension to the standard +driver model (so that we can finally get rid of the legacy model.) + +You simply have to define a detect callback which will attempt to +identify supported devices (returning 0 for supported ones and -ENODEV +for unsupported ones), a list of addresses to probe, and a device type +(or class) so that only I2C buses which may have that type of device +connected (and not otherwise enumerated) will be probed. The i2c +core will then call you back as needed and will instantiate a device +for you for every successful detection. + +Note that this mechanism is purely optional and not suitable for all +devices. You need some reliable way to identify the supported devices +(typically using device-specific, dedicated identification registers), +otherwise misdetections are likely to occur and things can get wrong +quickly. + + Device Deletion (Standard driver model) --------------------------------------- @@ -569,7 +598,6 @@ SMBus communication in terms of it. Never use this function directly! - extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte(struct i2c_client * client); extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); @@ -578,30 +606,31 @@ SMBus communication extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); extern s32 i2c_smbus_write_word_data(struct i2c_client * client, u8 command, u16 value); + extern s32 i2c_smbus_read_block_data(struct i2c_client * client, + u8 command, u8 *values); extern s32 i2c_smbus_write_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); - -These ones were removed in Linux 2.6.10 because they had no users, but could -be added back later if needed: - - extern s32 i2c_smbus_read_block_data(struct i2c_client * client, - u8 command, u8 *values); extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); + +These ones were removed from i2c-core because they had no users, but could +be added back later if needed: + + extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); extern s32 i2c_smbus_process_call(struct i2c_client * client, u8 command, u16 value); extern s32 i2c_smbus_block_process_call(struct i2c_client *client, u8 command, u8 length, u8 *values) -All these transactions return -1 on failure. The 'write' transactions -return 0 on success; the 'read' transactions return the read value, except -for read_block, which returns the number of values read. The block buffers -need not be longer than 32 bytes. +All these transactions return a negative errno value on failure. The 'write' +transactions return 0 on success; the 'read' transactions return the read +value, except for block transactions, which return the number of values +read. The block buffers need not be longer than 32 bytes. You can read the file `smbus-protocol' for more information about the actual SMBus protocol. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b3a5aad7e629..312fe77764a4 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -571,6 +571,8 @@ and is between 256 and 4096 characters. It is defined in the file debug_objects [KNL] Enable object debugging + debugpat [X86] Enable PAT debugging + decnet.addr= [HW,NET] Format: <area>[,<node>] See also Documentation/networking/decnet.txt. @@ -756,9 +758,6 @@ and is between 256 and 4096 characters. It is defined in the file hd= [EIDE] (E)IDE hard drive subsystem geometry Format: <cyl>,<head>,<sect> - hd?= [HW] (E)IDE subsystem - hd?lun= See Documentation/ide/ide.txt. - highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact size of <nn>. This works even on boxes that have no highmem otherwise. This also works to reduce highmem @@ -1610,6 +1609,10 @@ and is between 256 and 4096 characters. It is defined in the file Format: { parport<nr> | timid | 0 } See also Documentation/parport.txt. + pmtmr= [X86] Manual setup of pmtmr I/O Port. + Override pmtimer IOPort with a hex value. + e.g. pmtmr=0x508 + pnpacpi= [ACPI] { off } diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 6877e7187113..a79633d702bf 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -172,6 +172,7 @@ architectures: - ia64 (Does not support probes on instruction slot1.) - sparc64 (Return probes not yet implemented.) - arm +- ppc 3. Configuring Kprobes diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 1d2a772506cf..de2e5c05d6e7 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -41,23 +41,12 @@ Table of Contents VI - System-on-a-chip devices and nodes 1) Defining child nodes of an SOC 2) Representing devices without a current OF specification - a) MDIO IO device - b) Gianfar-compatible ethernet nodes - c) PHY nodes - d) Interrupt controllers - e) I2C - f) Freescale SOC USB controllers - g) Freescale SOC SEC Security Engines - h) Board Control and Status (BCSR) - i) Freescale QUICC Engine module (QE) - j) CFI or JEDEC memory-mapped NOR flash - k) Global Utilities Block - l) Freescale Communications Processor Module - m) Chipselect/Local Bus - n) 4xx/Axon EMAC ethernet nodes - o) Xilinx IP cores - p) Freescale Synchronous Serial Interface - q) USB EHCI controllers + a) PHY nodes + b) Interrupt controllers + c) CFI or JEDEC memory-mapped NOR flash + d) 4xx/Axon EMAC ethernet nodes + e) Xilinx IP cores + f) USB EHCI controllers VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -1246,80 +1235,7 @@ descriptions for the SOC devices for which new nodes have been defined; this list will expand as more and more SOC-containing platforms are moved over to use the flattened-device-tree model. - a) MDIO IO device - - The MDIO is a bus to which the PHY devices are connected. For each - device that exists on this bus, a child node should be created. See - the definition of the PHY node below for an example of how to define - a PHY. - - Required properties: - - reg : Offset and length of the register set for the device - - compatible : Should define the compatible device type for the - mdio. Currently, this is most likely to be "fsl,gianfar-mdio" - - Example: - - mdio@24520 { - reg = <24520 20>; - compatible = "fsl,gianfar-mdio"; - - ethernet-phy@0 { - ...... - }; - }; - - - b) Gianfar-compatible ethernet nodes - - Required properties: - - - device_type : Should be "network" - - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" - - compatible : Should be "gianfar" - - reg : Offset and length of the register set for the device - - mac-address : List of bytes representing the ethernet address of - this controller - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - phy-handle : The phandle for the PHY connected to this ethernet - controller. - - fixed-link : <a b c d e> where a is emulated phy id - choose any, - but unique to the all specified fixed-links, b is duplex - 0 half, - 1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no - pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause. - - Recommended properties: - - - phy-connection-type : a string naming the controller/PHY interface type, - i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii", - "tbi", or "rtbi". This property is only really needed if the connection - is of type "rgmii-id", as all other connection types are detected by - hardware. - - - Example: - - ethernet@24000 { - #size-cells = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <24000 1000>; - mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <d 3 e 3 12 3>; - interrupt-parent = <40000>; - phy-handle = <2452000> - }; - - - - c) PHY nodes + a) PHY nodes Required properties: @@ -1347,7 +1263,7 @@ platforms are moved over to use the flattened-device-tree model. }; - d) Interrupt controllers + b) Interrupt controllers Some SOC devices contain interrupt controllers that are different from the standard Open PIC specification. The SOC device nodes for @@ -1360,491 +1276,14 @@ platforms are moved over to use the flattened-device-tree model. pic@40000 { linux,phandle = <40000>; - clock-frequency = <0>; interrupt-controller; #address-cells = <0>; reg = <40000 40000>; - built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; - big-endian; - }; - - - e) I2C - - Required properties : - - - device_type : Should be "i2c" - - reg : Offset and length of the register set for the device - - Recommended properties : - - - compatible : Should be "fsl-i2c" for parts compatible with - Freescale I2C specifications. - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - dfsrr : boolean; if defined, indicates that this I2C device has - a digital filter sampling rate register - - fsl5200-clocking : boolean; if defined, indicated that this device - uses the FSL 5200 clocking mechanism. - - Example : - - i2c@3000 { - interrupt-parent = <40000>; - interrupts = <1b 3>; - reg = <3000 18>; - device_type = "i2c"; - compatible = "fsl-i2c"; - dfsrr; - }; - - - f) Freescale SOC USB controllers - - The device node for a USB controller that is part of a Freescale - SOC is as described in the document "Open Firmware Recommended - Practice : Universal Serial Bus" with the following modifications - and additions : - - Required properties : - - compatible : Should be "fsl-usb2-mph" for multi port host USB - controllers, or "fsl-usb2-dr" for dual role USB controllers - - phy_type : For multi port host USB controllers, should be one of - "ulpi", or "serial". For dual role USB controllers, should be - one of "ulpi", "utmi", "utmi_wide", or "serial". - - reg : Offset and length of the register set for the device - - port0 : boolean; if defined, indicates port0 is connected for - fsl-usb2-mph compatible controllers. Either this property or - "port1" (or both) must be defined for "fsl-usb2-mph" compatible - controllers. - - port1 : boolean; if defined, indicates port1 is connected for - fsl-usb2-mph compatible controllers. Either this property or - "port0" (or both) must be defined for "fsl-usb2-mph" compatible - controllers. - - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible - controllers. Can be "host", "peripheral", or "otg". Default to - "host" if not defined for backward compatibility. - - Recommended properties : - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - Example multi port host USB controller device node : - usb@22000 { - compatible = "fsl-usb2-mph"; - reg = <22000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 1>; - phy_type = "ulpi"; - port0; - port1; - }; - - Example dual role USB controller device node : - usb@23000 { - compatible = "fsl-usb2-dr"; - reg = <23000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 1>; - dr_mode = "otg"; - phy = "ulpi"; - }; - - - g) Freescale SOC SEC Security Engines - - Required properties: - - - device_type : Should be "crypto" - - model : Model of the device. Should be "SEC1" or "SEC2" - - compatible : Should be "talitos" - - reg : Offset and length of the register set for the device - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - num-channels : An integer representing the number of channels - available. - - channel-fifo-len : An integer representing the number of - descriptor pointers each channel fetch fifo can hold. - - exec-units-mask : The bitmask representing what execution units - (EUs) are available. It's a single 32-bit cell. EU information - should be encoded following the SEC's Descriptor Header Dword - EU_SEL0 field documentation, i.e. as follows: - - bit 0 = reserved - should be 0 - bit 1 = set if SEC has the ARC4 EU (AFEU) - bit 2 = set if SEC has the DES/3DES EU (DEU) - bit 3 = set if SEC has the message digest EU (MDEU) - bit 4 = set if SEC has the random number generator EU (RNG) - bit 5 = set if SEC has the public key EU (PKEU) - bit 6 = set if SEC has the AES EU (AESU) - bit 7 = set if SEC has the Kasumi EU (KEU) - - bits 8 through 31 are reserved for future SEC EUs. - - - descriptor-types-mask : The bitmask representing what descriptors - are available. It's a single 32-bit cell. Descriptor type - information should be encoded following the SEC's Descriptor - Header Dword DESC_TYPE field documentation, i.e. as follows: - - bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type - bit 1 = set if SEC supports the ipsec_esp descriptor type - bit 2 = set if SEC supports the common_nonsnoop desc. type - bit 3 = set if SEC supports the 802.11i AES ccmp desc. type - bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type - bit 5 = set if SEC supports the srtp descriptor type - bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type - bit 7 = set if SEC supports the pkeu_assemble descriptor type - bit 8 = set if SEC supports the aesu_key_expand_output desc.type - bit 9 = set if SEC supports the pkeu_ptmul descriptor type - bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type - bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type - - ..and so on and so forth. - - Example: - - /* MPC8548E */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = <1d 3>; - interrupt-parent = <40000>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <000000fe>; - descriptor-types-mask = <012b0ebf>; - }; - - h) Board Control and Status (BCSR) - - Required properties: - - - device_type : Should be "board-control" - - reg : Offset and length of the register set for the device - - Example: - - bcsr@f8000000 { - device_type = "board-control"; - reg = <f8000000 8000>; - }; - - i) Freescale QUICC Engine module (QE) - This represents qe module that is installed on PowerQUICC II Pro. - - NOTE: This is an interim binding; it should be updated to fit - in with the CPM binding later in this document. - - Basically, it is a bus of devices, that could act more or less - as a complete entity (UCC, USB etc ). All of them should be siblings on - the "root" qe node, using the common properties from there. - The description below applies to the qe of MPC8360 and - more nodes and properties would be extended in the future. - - i) Root QE device - - Required properties: - - compatible : should be "fsl,qe"; - - model : precise model of the QE, Can be "QE", "CPM", or "CPM2" - - reg : offset and length of the device registers. - - bus-frequency : the clock frequency for QUICC Engine. - - Recommended properties - - brg-frequency : the internal clock source frequency for baud-rate - generators in Hz. - - Example: - qe@e0100000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - compatible = "fsl,qe"; - ranges = <0 e0100000 00100000>; - reg = <e0100000 480>; - brg-frequency = <0>; - bus-frequency = <179A7B00>; - } - - - ii) SPI (Serial Peripheral Interface) - - Required properties: - - cell-index : SPI controller index. - - compatible : should be "fsl,spi". - - mode : the SPI operation mode, it can be "cpu" or "cpu-qe". - - reg : Offset and length of the register set for the device - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - Example: - spi@4c0 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <4c0 40>; - interrupts = <82 0>; - interrupt-parent = <700>; - mode = "cpu"; - }; - - - iii) USB (Universal Serial Bus Controller) - - Required properties: - - compatible : could be "qe_udc" or "fhci-hcd". - - mode : the could be "host" or "slave". - - reg : Offset and length of the register set for the device - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - Example(slave): - usb@6c0 { - compatible = "qe_udc"; - reg = <6c0 40>; - interrupts = <8b 0>; - interrupt-parent = <700>; - mode = "slave"; }; - - iv) UCC (Unified Communications Controllers) - - Required properties: - - device_type : should be "network", "hldc", "uart", "transparent" - "bisync", "atm", or "serial". - - compatible : could be "ucc_geth" or "fsl_atm" and so on. - - cell-index : the ucc number(1-8), corresponding to UCCx in UM. - - reg : Offset and length of the register set for the device - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - pio-handle : The phandle for the Parallel I/O port configuration. - - port-number : for UART drivers, the port number to use, between 0 and 3. - This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0. - The port number is added to the minor number of the device. Unlike the - CPM UART driver, the port-number is required for the QE UART driver. - - soft-uart : for UART drivers, if specified this means the QE UART device - driver should use "Soft-UART" mode, which is needed on some SOCs that have - broken UART hardware. Soft-UART is provided via a microcode upload. - - rx-clock-name: the UCC receive clock source - "none": clock source is disabled - "brg1" through "brg16": clock source is BRG1-BRG16, respectively - "clk1" through "clk24": clock source is CLK1-CLK24, respectively - - tx-clock-name: the UCC transmit clock source - "none": clock source is disabled - "brg1" through "brg16": clock source is BRG1-BRG16, respectively - "clk1" through "clk24": clock source is CLK1-CLK24, respectively - The following two properties are deprecated. rx-clock has been replaced - with rx-clock-name, and tx-clock has been replaced with tx-clock-name. - Drivers that currently use the deprecated properties should continue to - do so, in order to support older device trees, but they should be updated - to check for the new properties first. - - rx-clock : represents the UCC receive clock source. - 0x00 : clock source is disabled; - 0x1~0x10 : clock source is BRG1~BRG16 respectively; - 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. - - tx-clock: represents the UCC transmit clock source; - 0x00 : clock source is disabled; - 0x1~0x10 : clock source is BRG1~BRG16 respectively; - 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. - - Required properties for network device_type: - - mac-address : list of bytes representing the ethernet address. - - phy-handle : The phandle for the PHY connected to this controller. - - Recommended properties: - - phy-connection-type : a string naming the controller/PHY interface type, - i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal - Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only), - "tbi", or "rtbi". - - Example: - ucc@2000 { - device_type = "network"; - compatible = "ucc_geth"; - cell-index = <1>; - reg = <2000 200>; - interrupts = <a0 0>; - interrupt-parent = <700>; - mac-address = [ 00 04 9f 00 23 23 ]; - rx-clock = "none"; - tx-clock = "clk9"; - phy-handle = <212000>; - phy-connection-type = "gmii"; - pio-handle = <140001>; - }; - - - v) Parallel I/O Ports - - This node configures Parallel I/O ports for CPUs with QE support. - The node should reside in the "soc" node of the tree. For each - device that using parallel I/O ports, a child node should be created. - See the definition of the Pin configuration nodes below for more - information. - - Required properties: - - device_type : should be "par_io". - - reg : offset to the register set and its length. - - num-ports : number of Parallel I/O ports - - Example: - par_io@1400 { - reg = <1400 100>; - #address-cells = <1>; - #size-cells = <0>; - device_type = "par_io"; - num-ports = <7>; - ucc_pin@01 { - ...... - }; - - - vi) Pin configuration nodes - - Required properties: - - linux,phandle : phandle of this node; likely referenced by a QE - device. - - pio-map : array of pin configurations. Each pin is defined by 6 - integers. The six numbers are respectively: port, pin, dir, - open_drain, assignment, has_irq. - - port : port number of the pin; 0-6 represent port A-G in UM. - - pin : pin number in the port. - - dir : direction of the pin, should encode as follows: - - 0 = The pin is disabled - 1 = The pin is an output - 2 = The pin is an input - 3 = The pin is I/O - - - open_drain : indicates the pin is normal or wired-OR: - - 0 = The pin is actively driven as an output - 1 = The pin is an open-drain driver. As an output, the pin is - driven active-low, otherwise it is three-stated. - - - assignment : function number of the pin according to the Pin Assignment - tables in User Manual. Each pin can have up to 4 possible functions in - QE and two options for CPM. - - has_irq : indicates if the pin is used as source of external - interrupts. - - Example: - ucc_pin@01 { - linux,phandle = <140001>; - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 0 3 1 0 1 0 /* TxD0 */ - 0 4 1 0 1 0 /* TxD1 */ - 0 5 1 0 1 0 /* TxD2 */ - 0 6 1 0 1 0 /* TxD3 */ - 1 6 1 0 3 0 /* TxD4 */ - 1 7 1 0 1 0 /* TxD5 */ - 1 9 1 0 2 0 /* TxD6 */ - 1 a 1 0 2 0 /* TxD7 */ - 0 9 2 0 1 0 /* RxD0 */ - 0 a 2 0 1 0 /* RxD1 */ - 0 b 2 0 1 0 /* RxD2 */ - 0 c 2 0 1 0 /* RxD3 */ - 0 d 2 0 1 0 /* RxD4 */ - 1 1 2 0 2 0 /* RxD5 */ - 1 0 2 0 2 0 /* RxD6 */ - 1 4 2 0 2 0 /* RxD7 */ - 0 7 1 0 1 0 /* TX_EN */ - 0 8 1 0 1 0 /* TX_ER */ - 0 f 2 0 1 0 /* RX_DV */ - 0 10 2 0 1 0 /* RX_ER */ - 0 0 2 0 1 0 /* RX_CLK */ - 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ - 2 8 2 0 1 0>; /* GTX125 - CLK9 */ - }; - - vii) Multi-User RAM (MURAM) - - Required properties: - - compatible : should be "fsl,qe-muram", "fsl,cpm-muram". - - mode : the could be "host" or "slave". - - ranges : Should be defined as specified in 1) to describe the - translation of MURAM addresses. - - data-only : sub-node which defines the address area under MURAM - bus that can be allocated as data/parameter - - Example: - - muram@10000 { - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0 00010000 0000c000>; - - data-only@0{ - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0 c000>; - }; - }; - - viii) Uploaded QE firmware - - If a new firwmare has been uploaded to the QE (usually by the - boot loader), then a 'firmware' child node should be added to the QE - node. This node provides information on the uploaded firmware that - device drivers may need. - - Required properties: - - id: The string name of the firmware. This is taken from the 'id' - member of the qe_firmware structure of the uploaded firmware. - Device drivers can search this string to determine if the - firmware they want is already present. - - extended-modes: The Extended Modes bitfield, taken from the - firmware binary. It is a 64-bit number represented - as an array of two 32-bit numbers. - - virtual-traps: The virtual traps, taken from the firmware binary. - It is an array of 8 32-bit numbers. - - Example: - - firmware { - id = "Soft-UART"; - extended-modes = <0 0>; - virtual-traps = <0 0 0 0 0 0 0 0>; - } - - j) CFI or JEDEC memory-mapped NOR flash + c) CFI or JEDEC memory-mapped NOR flash Flash chips (Memory Technology Devices) are often used for solid state file systems on embedded devices. @@ -1908,268 +1347,7 @@ platforms are moved over to use the flattened-device-tree model. }; }; - k) Global Utilities Block - - The global utilities block controls power management, I/O device - enabling, power-on-reset configuration monitoring, general-purpose - I/O signal configuration, alternate function selection for multiplexed - signals, and clock control. - - Required properties: - - - compatible : Should define the compatible device type for - global-utilities. - - reg : Offset and length of the register set for the device. - - Recommended properties: - - - fsl,has-rstcr : Indicates that the global utilities register set - contains a functioning "reset control register" (i.e. the board - is wired to reset upon setting the HRESET_REQ bit in this register). - - Example: - - global-utilities@e0000 { /* global utilities block */ - compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; - fsl,has-rstcr; - }; - - l) Freescale Communications Processor Module - - NOTE: This is an interim binding, and will likely change slightly, - as more devices are supported. The QE bindings especially are - incomplete. - - i) Root CPM node - - Properties: - - compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe". - - reg : A 48-byte region beginning with CPCR. - - Example: - cpm@119c0 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; - reg = <119c0 30>; - } - - ii) Properties common to mulitple CPM/QE devices - - - fsl,cpm-command : This value is ORed with the opcode and command flag - to specify the device on which a CPM command operates. - - - fsl,cpm-brg : Indicates which baud rate generator the device - is associated with. If absent, an unused BRG - should be dynamically allocated. If zero, the - device uses an external clock rather than a BRG. - - - reg : Unless otherwise specified, the first resource represents the - scc/fcc/ucc registers, and the second represents the device's - parameter RAM region (if it has one). - - iii) Serial - - Currently defined compatibles: - - fsl,cpm1-smc-uart - - fsl,cpm2-smc-uart - - fsl,cpm1-scc-uart - - fsl,cpm2-scc-uart - - fsl,qe-uart - - Example: - - serial@11a00 { - device_type = "serial"; - compatible = "fsl,mpc8272-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <11a00 20 8000 100>; - interrupts = <28 8>; - interrupt-parent = <&PIC>; - fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; - }; - - iii) Network - - Currently defined compatibles: - - fsl,cpm1-scc-enet - - fsl,cpm2-scc-enet - - fsl,cpm1-fec-enet - - fsl,cpm2-fcc-enet (third resource is GFEMR) - - fsl,qe-enet - - Example: - - ethernet@11300 { - device_type = "network"; - compatible = "fsl,mpc8272-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <11300 20 8400 100 11390 1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8>; - interrupt-parent = <&PIC>; - phy-handle = <&PHY0>; - fsl,cpm-command = <12000300>; - }; - - iv) MDIO - - Currently defined compatibles: - fsl,pq1-fec-mdio (reg is same as first resource of FEC device) - fsl,cpm2-mdio-bitbang (reg is port C registers) - - Properties for fsl,cpm2-mdio-bitbang: - fsl,mdio-pin : pin of port C controlling mdio data - fsl,mdc-pin : pin of port C controlling mdio clock - - Example: - - mdio@10d40 { - device_type = "mdio"; - compatible = "fsl,mpc8272ads-mdio-bitbang", - "fsl,mpc8272-mdio-bitbang", - "fsl,cpm2-mdio-bitbang"; - reg = <10d40 14>; - #address-cells = <1>; - #size-cells = <0>; - fsl,mdio-pin = <12>; - fsl,mdc-pin = <13>; - }; - - v) Baud Rate Generators - - Currently defined compatibles: - fsl,cpm-brg - fsl,cpm1-brg - fsl,cpm2-brg - - Properties: - - reg : There may be an arbitrary number of reg resources; BRG - numbers are assigned to these in order. - - clock-frequency : Specifies the base frequency driving - the BRG. - - Example: - - brg@119f0 { - compatible = "fsl,mpc8272-brg", - "fsl,cpm2-brg", - "fsl,cpm-brg"; - reg = <119f0 10 115f0 10>; - clock-frequency = <d#25000000>; - }; - - vi) Interrupt Controllers - - Currently defined compatibles: - - fsl,cpm1-pic - - only one interrupt cell - - fsl,pq1-pic - - fsl,cpm2-pic - - second interrupt cell is level/sense: - - 2 is falling edge - - 8 is active low - - Example: - - interrupt-controller@10c00 { - #interrupt-cells = <2>; - interrupt-controller; - reg = <10c00 80>; - compatible = "mpc8272-pic", "fsl,cpm2-pic"; - }; - - vii) USB (Universal Serial Bus Controller) - - Properties: - - compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb" - - Example: - usb@11bc0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,cpm2-usb"; - reg = <11b60 18 8b00 100>; - interrupts = <b 8>; - interrupt-parent = <&PIC>; - fsl,cpm-command = <2e600000>; - }; - - viii) Multi-User RAM (MURAM) - - The multi-user/dual-ported RAM is expressed as a bus under the CPM node. - - Ranges must be set up subject to the following restrictions: - - - Children's reg nodes must be offsets from the start of all muram, even - if the user-data area does not begin at zero. - - If multiple range entries are used, the difference between the parent - address and the child address must be the same in all, so that a single - mapping can cover them all while maintaining the ability to determine - CPM-side offsets with pointer subtraction. It is recommended that - multiple range entries not be used. - - A child address of zero must be translatable, even if no reg resources - contain it. - - A child "data" node must exist, compatible with "fsl,cpm-muram-data", to - indicate the portion of muram that is usable by the OS for arbitrary - purposes. The data node may have an arbitrary number of reg resources, - all of which contribute to the allocatable muram pool. - - Example, based on mpc8272: - - muram@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 10000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9800 800>; - }; - }; - - m) Chipselect/Local Bus - - Properties: - - name : Should be localbus - - #address-cells : Should be either two or three. The first cell is the - chipselect number, and the remaining cells are the - offset into the chipselect. - - #size-cells : Either one or two, depending on how large each chipselect - can be. - - ranges : Each range corresponds to a single chipselect, and cover - the entire access window as configured. - - Example: - localbus@f0010100 { - compatible = "fsl,mpc8272-localbus", - "fsl,pq2-localbus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <f0010100 40>; - - ranges = <0 0 fe000000 02000000 - 1 0 f4500000 00008000>; - - flash@0,0 { - compatible = "jedec-flash"; - reg = <0 0 2000000>; - bank-width = <4>; - device-width = <1>; - }; - - board-control@1,0 { - reg = <1 0 20>; - compatible = "fsl,mpc8272ads-bcsr"; - }; - }; - - - n) 4xx/Axon EMAC ethernet nodes + d) 4xx/Axon EMAC ethernet nodes The EMAC ethernet controller in IBM and AMCC 4xx chips, and also the Axon bridge. To operate this needs to interact with a ths @@ -2317,7 +1495,7 @@ platforms are moved over to use the flattened-device-tree model. available. For Axon: 0x0000012a - o) Xilinx IP cores + e) Xilinx IP cores The Xilinx EDK toolchain ships with a set of IP cores (devices) for use in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range @@ -2611,206 +1789,7 @@ platforms are moved over to use the flattened-device-tree model. - reg-offset : A value of 3 is required - reg-shift : A value of 2 is required - - p) Freescale Synchronous Serial Interface - - The SSI is a serial device that communicates with audio codecs. It can - be programmed in AC97, I2S, left-justified, or right-justified modes. - - Required properties: - - compatible : compatible list, containing "fsl,ssi" - - cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on - - reg : offset and length of the register set for the device - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and - level information for the interrupt. This should be - encoded based on the information in section 2) - depending on the type of interrupt controller you - have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - fsl,mode : the operating mode for the SSI interface - "i2s-slave" - I2S mode, SSI is clock slave - "i2s-master" - I2S mode, SSI is clock master - "lj-slave" - left-justified mode, SSI is clock slave - "lj-master" - l.j. mode, SSI is clock master - "rj-slave" - right-justified mode, SSI is clock slave - "rj-master" - r.j., SSI is clock master - "ac97-slave" - AC97 mode, SSI is clock slave - "ac97-master" - AC97 mode, SSI is clock master - - Optional properties: - - codec-handle : phandle to a 'codec' node that defines an audio - codec connected to this SSI. This node is typically - a child of an I2C or other control node. - - Child 'codec' node required properties: - - compatible : compatible list, contains the name of the codec - - Child 'codec' node optional properties: - - clock-frequency : The frequency of the input clock, which typically - comes from an on-board dedicated oscillator. - - * Freescale 83xx DMA Controller - - Freescale PowerPC 83xx have on chip general purpose DMA controllers. - - Required properties: - - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma", where CHIP is the processor - (mpc8349, mpc8360, etc.) and the second is - "fsl,elo-dma" - - reg : <registers mapping for DMA general status reg> - - ranges : Should be defined as specified in 1) to describe the - DMA controller channels. - - cell-index : controller index. 0 for controller @ 0x8100 - - interrupts : <interrupt mapping for DMA IRQ> - - interrupt-parent : optional, if needed for interrupt mapping - - - - DMA channel nodes: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma-channel", where CHIP is the processor - (mpc8349, mpc8350, etc.) and the second is - "fsl,elo-dma-channel" - - reg : <registers mapping for channel> - - cell-index : dma channel index starts at 0. - - Optional properties: - - interrupts : <interrupt mapping for DMA channel IRQ> - (on 83xx this is expected to be identical to - the interrupts property of the parent node) - - interrupt-parent : optional, if needed for interrupt mapping - - Example: - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <82a8 4>; - ranges = <0 8100 1a4>; - interrupt-parent = <&ipic>; - interrupts = <47 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <0>; - reg = <0 80>; - }; - dma-channel@80 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <1>; - reg = <80 80>; - }; - dma-channel@100 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <2>; - reg = <100 80>; - }; - dma-channel@180 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <3>; - reg = <180 80>; - }; - }; - - * Freescale 85xx/86xx DMA Controller - - Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers. - - Required properties: - - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma", where CHIP is the processor - (mpc8540, mpc8540, etc.) and the second is - "fsl,eloplus-dma" - - reg : <registers mapping for DMA general status reg> - - cell-index : controller index. 0 for controller @ 0x21000, - 1 for controller @ 0xc000 - - ranges : Should be defined as specified in 1) to describe the - DMA controller channels. - - - DMA channel nodes: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma-channel", where CHIP is the processor - (mpc8540, mpc8560, etc.) and the second is - "fsl,eloplus-dma-channel" - - cell-index : dma channel index starts at 0. - - reg : <registers mapping for channel> - - interrupts : <interrupt mapping for DMA channel IRQ> - - interrupt-parent : optional, if needed for interrupt mapping - - Example: - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <21300 4>; - ranges = <0 21100 200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0 80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <14 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <80 80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <15 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <100 80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <180 80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <17 2>; - }; - }; - - * Freescale 8xxx/3.0 Gb/s SATA nodes - - SATA nodes are defined to describe on-chip Serial ATA controllers. - Each SATA port should have its own node. - - Required properties: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-sata", where CHIP is the processor - (mpc8315, mpc8379, etc.) and the second is - "fsl,pq-sata" - - interrupts : <interrupt mapping for SATA IRQ> - - cell-index : controller index. - 1 for controller @ 0x18000 - 2 for controller @ 0x19000 - 3 for controller @ 0x1a000 - 4 for controller @ 0x1b000 - - Optional properties: - - interrupt-parent : optional, if needed for interrupt mapping - - reg : <registers mapping> - - Example: - - sata@18000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <2c 8>; - interrupt-parent = < &ipic >; - }; - - q) USB EHCI controllers + f) USB EHCI controllers Required properties: - compatible : should be "usb-ehci". @@ -2836,40 +1815,6 @@ platforms are moved over to use the flattened-device-tree model. big-endian; }; - r) Freescale Display Interface Unit - - The Freescale DIU is a LCD controller, with proper hardware, it can also - drive DVI monitors. - - Required properties: - - compatible : should be "fsl-diu". - - reg : should contain at least address and length of the DIU register - set. - - Interrupts : one DIU interrupt should be describe here. - - Example (MPC8610HPCD) - display@2c000 { - compatible = "fsl,diu"; - reg = <0x2c000 100>; - interrupts = <72 2>; - interrupt-parent = <&mpic>; - }; - - s) Freescale on board FPGA - - This is the memory-mapped registers for on board FPGA. - - Required properities: - - compatible : should be "fsl,fpga-pixis". - - reg : should contain the address and the lenght of the FPPGA register - set. - - Example (MPC8610HPCD) - board-control@e8000000 { - compatible = "fsl,fpga-pixis"; - reg = <0xe8000000 32>; - }; - VII - Marvell Discovery mv64[345]6x System Controller chips =========================================================== @@ -3622,14 +2567,11 @@ not necessary as they are usually the same as the root node. pic@40000 { linux,phandle = <40000>; - clock-frequency = <0>; interrupt-controller; #address-cells = <0>; reg = <40000 40000>; - built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; - big-endian; }; i2c@3000 { diff --git a/Documentation/powerpc/bootwrapper.txt b/Documentation/powerpc/bootwrapper.txt new file mode 100644 index 000000000000..d60fced5e1cc --- /dev/null +++ b/Documentation/powerpc/bootwrapper.txt @@ -0,0 +1,141 @@ +The PowerPC boot wrapper +------------------------ +Copyright (C) Secret Lab Technologies Ltd. + +PowerPC image targets compresses and wraps the kernel image (vmlinux) with +a boot wrapper to make it usable by the system firmware. There is no +standard PowerPC firmware interface, so the boot wrapper is designed to +be adaptable for each kind of image that needs to be built. + +The boot wrapper can be found in the arch/powerpc/boot/ directory. The +Makefile in that directory has targets for all the available image types. +The different image types are used to support all of the various firmware +interfaces found on PowerPC platforms. OpenFirmware is the most commonly +used firmware type on general purpose PowerPC systems from Apple, IBM and +others. U-Boot is typically found on embedded PowerPC hardware, but there +are a handful of other firmware implementations which are also popular. Each +firmware interface requires a different image format. + +The boot wrapper is built from the makefile in arch/powerpc/boot/Makefile and +it uses the wrapper script (arch/powerpc/boot/wrapper) to generate target +image. The details of the build system is discussed in the next section. +Currently, the following image format targets exist: + + cuImage.%: Backwards compatible uImage for older version of + U-Boot (for versions that don't understand the device + tree). This image embeds a device tree blob inside + the image. The boot wrapper, kernel and device tree + are all embedded inside the U-Boot uImage file format + with boot wrapper code that extracts data from the old + bd_info structure and loads the data into the device + tree before jumping into the kernel. + Because of the series of #ifdefs found in the + bd_info structure used in the old U-Boot interfaces, + cuImages are platform specific. Each specific + U-Boot platform has a different platform init file + which populates the embedded device tree with data + from the platform specific bd_info file. The platform + specific cuImage platform init code can be found in + arch/powerpc/boot/cuboot.*.c. Selection of the correct + cuImage init code for a specific board can be found in + the wrapper structure. + dtbImage.%: Similar to zImage, except device tree blob is embedded + inside the image instead of provided by firmware. The + output image file can be either an elf file or a flat + binary depending on the platform. + dtbImages are used on systems which do not have an + interface for passing a device tree directly. + dtbImages are similar to simpleImages except that + dtbImages have platform specific code for extracting + data from the board firmware, but simpleImages do not + talk to the firmware at all. + PlayStation 3 support uses dtbImage. So do Embedded + Planet boards using the PlanetCore firmware. Board + specific initialization code is typically found in a + file named arch/powerpc/boot/<platform>.c; but this + can be overridden by the wrapper script. + simpleImage.%: Firmware independent compressed image that does not + depend on any particular firmware interface and embeds + a device tree blob. This image is a flat binary that + can be loaded to any location in RAM and jumped to. + Firmware cannot pass any configuration data to the + kernel with this image type and it depends entirely on + the embedded device tree for all information. + The simpleImage is useful for booting systems with + an unknown firmware interface or for booting from + a debugger when no firmware is present (such as on + the Xilinx Virtex platform). The only assumption that + simpleImage makes is that RAM is correctly initialized + and that the MMU is either off or has RAM mapped to + base address 0. + simpleImage also supports inserting special platform + specific initialization code to the start of the bootup + sequence. The virtex405 platform uses this feature to + ensure that the cache is invalidated before caching + is enabled. Platform specific initialization code is + added as part of the wrapper script and is keyed on + the image target name. For example, all + simpleImage.virtex405-* targets will add the + virtex405-head.S initialization code (This also means + that the dts file for virtex405 targets should be + named (virtex405-<board>.dts). Search the wrapper + script for 'virtex405' and see the file + arch/powerpc/boot/virtex405-head.S for details. + treeImage.%; Image format for used with OpenBIOS firmware found + on some ppc4xx hardware. This image embeds a device + tree blob inside the image. + uImage: Native image format used by U-Boot. The uImage target + does not add any boot code. It just wraps a compressed + vmlinux in the uImage data structure. This image + requires a version of U-Boot that is able to pass + a device tree to the kernel at boot. If using an older + version of U-Boot, then you need to use a cuImage + instead. + zImage.%: Image format which does not embed a device tree. + Used by OpenFirmware and other firmware interfaces + which are able to supply a device tree. This image + expects firmware to provide the device tree at boot. + Typically, if you have general purpose PowerPC + hardware then you want this image format. + +Image types which embed a device tree blob (simpleImage, dtbImage, treeImage, +and cuImage) all generate the device tree blob from a file in the +arch/powerpc/boot/dts/ directory. The Makefile selects the correct device +tree source based on the name of the target. Therefore, if the kernel is +built with 'make treeImage.walnut simpleImage.virtex405-ml403', then the +build system will use arch/powerpc/boot/dts/walnut.dts to build +treeImage.walnut and arch/powerpc/boot/dts/virtex405-ml403.dts to build +the simpleImage.virtex405-ml403. + +Two special targets called 'zImage' and 'zImage.initrd' also exist. These +targets build all the default images as selected by the kernel configuration. +Default images are selected by the boot wrapper Makefile +(arch/powerpc/boot/Makefile) by adding targets to the $image-y variable. Look +at the Makefile to see which default image targets are available. + +How it is built +--------------- +arch/powerpc is designed to support multiplatform kernels, which means +that a single vmlinux image can be booted on many different target boards. +It also means that the boot wrapper must be able to wrap for many kinds of +images on a single build. The design decision was made to not use any +conditional compilation code (#ifdef, etc) in the boot wrapper source code. +All of the boot wrapper pieces are buildable at any time regardless of the +kernel configuration. Building all the wrapper bits on every kernel build +also ensures that obscure parts of the wrapper are at the very least compile +tested in a large variety of environments. + +The wrapper is adapted for different image types at link time by linking in +just the wrapper bits that are appropriate for the image type. The 'wrapper +script' (found in arch/powerpc/boot/wrapper) is called by the Makefile and +is responsible for selecting the correct wrapper bits for the image type. +The arguments are well documented in the script's comment block, so they +are not repeated here. However, it is worth mentioning that the script +uses the -p (platform) argument as the main method of deciding which wrapper +bits to compile in. Look for the large 'case "$platform" in' block in the +middle of the script. This is also the place where platform specific fixups +can be selected by changing the link order. + +In particular, care should be taken when working with cuImages. cuImage +wrapper bits are very board specific and care should be taken to make sure +the target you are trying to build is supported by the wrapper bits. diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt new file mode 100644 index 000000000000..74ae6f1cd2d6 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/board.txt @@ -0,0 +1,29 @@ +* Board Control and Status (BCSR) + +Required properties: + + - device_type : Should be "board-control" + - reg : Offset and length of the register set for the device + +Example: + + bcsr@f8000000 { + device_type = "board-control"; + reg = <f8000000 8000>; + }; + +* Freescale on board FPGA + +This is the memory-mapped registers for on board FPGA. + +Required properities: +- compatible : should be "fsl,fpga-pixis". +- reg : should contain the address and the lenght of the FPPGA register + set. + +Example (MPC8610HPCD): + + board-control@e8000000 { + compatible = "fsl,fpga-pixis"; + reg = <0xe8000000 32>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt new file mode 100644 index 000000000000..088fc471e03a --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt @@ -0,0 +1,67 @@ +* Freescale Communications Processor Module + +NOTE: This is an interim binding, and will likely change slightly, +as more devices are supported. The QE bindings especially are +incomplete. + +* Root CPM node + +Properties: +- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe". +- reg : A 48-byte region beginning with CPCR. + +Example: + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; + reg = <119c0 30>; + } + +* Properties common to mulitple CPM/QE devices + +- fsl,cpm-command : This value is ORed with the opcode and command flag + to specify the device on which a CPM command operates. + +- fsl,cpm-brg : Indicates which baud rate generator the device + is associated with. If absent, an unused BRG + should be dynamically allocated. If zero, the + device uses an external clock rather than a BRG. + +- reg : Unless otherwise specified, the first resource represents the + scc/fcc/ucc registers, and the second represents the device's + parameter RAM region (if it has one). + +* Multi-User RAM (MURAM) + +The multi-user/dual-ported RAM is expressed as a bus under the CPM node. + +Ranges must be set up subject to the following restrictions: + +- Children's reg nodes must be offsets from the start of all muram, even + if the user-data area does not begin at zero. +- If multiple range entries are used, the difference between the parent + address and the child address must be the same in all, so that a single + mapping can cover them all while maintaining the ability to determine + CPM-side offsets with pointer subtraction. It is recommended that + multiple range entries not be used. +- A child address of zero must be translatable, even if no reg resources + contain it. + +A child "data" node must exist, compatible with "fsl,cpm-muram-data", to +indicate the portion of muram that is usable by the OS for arbitrary +purposes. The data node may have an arbitrary number of reg resources, +all of which contribute to the allocatable muram pool. + +Example, based on mpc8272: + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9800 800>; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt new file mode 100644 index 000000000000..4c7d45eaf025 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt @@ -0,0 +1,21 @@ +* Baud Rate Generators + +Currently defined compatibles: +fsl,cpm-brg +fsl,cpm1-brg +fsl,cpm2-brg + +Properties: +- reg : There may be an arbitrary number of reg resources; BRG + numbers are assigned to these in order. +- clock-frequency : Specifies the base frequency driving + the BRG. + +Example: + brg@119f0 { + compatible = "fsl,mpc8272-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <119f0 10 115f0 10>; + clock-frequency = <d#25000000>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt new file mode 100644 index 000000000000..87bc6048667e --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt @@ -0,0 +1,41 @@ +* I2C + +The I2C controller is expressed as a bus under the CPM node. + +Properties: +- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c" +- reg : On CPM2 devices, the second resource doesn't specify the I2C + Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM + (typically 0x8afc 0x2). +- #address-cells : Should be one. The cell is the i2c device address with + the r/w bit set to zero. +- #size-cells : Should be zero. +- clock-frequency : Can be used to set the i2c clock frequency. If + unspecified, a default frequency of 60kHz is being used. +The following two properties are deprecated. They are only used by legacy +i2c drivers to find the bus to probe: +- linux,i2c-index : Can be used to hard code an i2c bus number. By default, + the bus number is dynamically assigned by the i2c core. +- linux,i2c-class : Can be used to override the i2c class. The class is used + by legacy i2c device drivers to find a bus in a specific context like + system management, video or sound. By default, I2C_CLASS_HWMON (1) is + being used. The definition of the classes can be found in + include/i2c/i2c.h + +Example, based on mpc823: + + i2c@860 { + compatible = "fsl,mpc823-i2c", + "fsl,cpm1-i2c"; + reg = <0x860 0x20 0x3c80 0x30>; + interrupts = <16>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt new file mode 100644 index 000000000000..8e3ee1681618 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt @@ -0,0 +1,18 @@ +* Interrupt Controllers + +Currently defined compatibles: +- fsl,cpm1-pic + - only one interrupt cell +- fsl,pq1-pic +- fsl,cpm2-pic + - second interrupt cell is level/sense: + - 2 is falling edge + - 8 is active low + +Example: + interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + compatible = "mpc8272-pic", "fsl,cpm2-pic"; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt new file mode 100644 index 000000000000..74bfda4bb824 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt @@ -0,0 +1,15 @@ +* USB (Universal Serial Bus Controller) + +Properties: +- compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb" + +Example: + usb@11bc0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,cpm2-usb"; + reg = <11b60 18 8b00 100>; + interrupts = <b 8>; + interrupt-parent = <&PIC>; + fsl,cpm-command = <2e600000>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt new file mode 100644 index 000000000000..0e4269446580 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt @@ -0,0 +1,45 @@ +* Network + +Currently defined compatibles: +- fsl,cpm1-scc-enet +- fsl,cpm2-scc-enet +- fsl,cpm1-fec-enet +- fsl,cpm2-fcc-enet (third resource is GFEMR) +- fsl,qe-enet + +Example: + + ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11300 20 8400 100 11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + fsl,cpm-command = <12000300>; + }; + +* MDIO + +Currently defined compatibles: +fsl,pq1-fec-mdio (reg is same as first resource of FEC device) +fsl,cpm2-mdio-bitbang (reg is port C registers) + +Properties for fsl,cpm2-mdio-bitbang: +fsl,mdio-pin : pin of port C controlling mdio data +fsl,mdc-pin : pin of port C controlling mdio clock + +Example: + mdio@10d40 { + device_type = "mdio"; + compatible = "fsl,mpc8272ads-mdio-bitbang", + "fsl,mpc8272-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + reg = <10d40 14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt new file mode 100644 index 000000000000..78790d58dc2c --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt @@ -0,0 +1,58 @@ +* Freescale QUICC Engine module (QE) +This represents qe module that is installed on PowerQUICC II Pro. + +NOTE: This is an interim binding; it should be updated to fit +in with the CPM binding later in this document. + +Basically, it is a bus of devices, that could act more or less +as a complete entity (UCC, USB etc ). All of them should be siblings on +the "root" qe node, using the common properties from there. +The description below applies to the qe of MPC8360 and +more nodes and properties would be extended in the future. + +i) Root QE device + +Required properties: +- compatible : should be "fsl,qe"; +- model : precise model of the QE, Can be "QE", "CPM", or "CPM2" +- reg : offset and length of the device registers. +- bus-frequency : the clock frequency for QUICC Engine. + +Recommended properties +- brg-frequency : the internal clock source frequency for baud-rate + generators in Hz. + +Example: + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,qe"; + ranges = <0 e0100000 00100000>; + reg = <e0100000 480>; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + } + +* Multi-User RAM (MURAM) + +Required properties: +- compatible : should be "fsl,qe-muram", "fsl,cpm-muram". +- mode : the could be "host" or "slave". +- ranges : Should be defined as specified in 1) to describe the + translation of MURAM addresses. +- data-only : sub-node which defines the address area under MURAM + bus that can be allocated as data/parameter + +Example: + + muram@10000 { + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0 c000>; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt new file mode 100644 index 000000000000..6c238f59b2a9 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt @@ -0,0 +1,24 @@ +* Uploaded QE firmware + + If a new firwmare has been uploaded to the QE (usually by the + boot loader), then a 'firmware' child node should be added to the QE + node. This node provides information on the uploaded firmware that + device drivers may need. + + Required properties: + - id: The string name of the firmware. This is taken from the 'id' + member of the qe_firmware structure of the uploaded firmware. + Device drivers can search this string to determine if the + firmware they want is already present. + - extended-modes: The Extended Modes bitfield, taken from the + firmware binary. It is a 64-bit number represented + as an array of two 32-bit numbers. + - virtual-traps: The virtual traps, taken from the firmware binary. + It is an array of 8 32-bit numbers. + +Example: + firmware { + id = "Soft-UART"; + extended-modes = <0 0>; + virtual-traps = <0 0 0 0 0 0 0 0>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt new file mode 100644 index 000000000000..60984260207b --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt @@ -0,0 +1,51 @@ +* Parallel I/O Ports + +This node configures Parallel I/O ports for CPUs with QE support. +The node should reside in the "soc" node of the tree. For each +device that using parallel I/O ports, a child node should be created. +See the definition of the Pin configuration nodes below for more +information. + +Required properties: +- device_type : should be "par_io". +- reg : offset to the register set and its length. +- num-ports : number of Parallel I/O ports + +Example: +par_io@1400 { + reg = <1400 100>; + #address-cells = <1>; + #size-cells = <0>; + device_type = "par_io"; + num-ports = <7>; + ucc_pin@01 { + ...... + }; + +Note that "par_io" nodes are obsolete, and should not be used for +the new device trees. Instead, each Par I/O bank should be represented +via its own gpio-controller node: + +Required properties: +- #gpio-cells : should be "2". +- compatible : should be "fsl,<chip>-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank". +- reg : offset to the register set and its length. +- gpio-controller : node to identify gpio controllers. + +Example: + qe_pio_a: gpio-controller@1400 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1400 0x18>; + gpio-controller; + }; + + qe_pio_e: gpio-controller@1460 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1460 0x18>; + gpio-controller; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt new file mode 100644 index 000000000000..c5b43061db3a --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt @@ -0,0 +1,60 @@ +* Pin configuration nodes + +Required properties: +- linux,phandle : phandle of this node; likely referenced by a QE + device. +- pio-map : array of pin configurations. Each pin is defined by 6 + integers. The six numbers are respectively: port, pin, dir, + open_drain, assignment, has_irq. + - port : port number of the pin; 0-6 represent port A-G in UM. + - pin : pin number in the port. + - dir : direction of the pin, should encode as follows: + + 0 = The pin is disabled + 1 = The pin is an output + 2 = The pin is an input + 3 = The pin is I/O + + - open_drain : indicates the pin is normal or wired-OR: + + 0 = The pin is actively driven as an output + 1 = The pin is an open-drain driver. As an output, the pin is + driven active-low, otherwise it is three-stated. + + - assignment : function number of the pin according to the Pin Assignment + tables in User Manual. Each pin can have up to 4 possible functions in + QE and two options for CPM. + - has_irq : indicates if the pin is used as source of external + interrupts. + +Example: + ucc_pin@01 { + linux,phandle = <140001>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 1 6 1 0 3 0 /* TxD4 */ + 1 7 1 0 1 0 /* TxD5 */ + 1 9 1 0 2 0 /* TxD6 */ + 1 a 1 0 2 0 /* TxD7 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 a 2 0 1 0 /* RxD1 */ + 0 b 2 0 1 0 /* RxD2 */ + 0 c 2 0 1 0 /* RxD3 */ + 0 d 2 0 1 0 /* RxD4 */ + 1 1 2 0 2 0 /* RxD5 */ + 1 0 2 0 2 0 /* RxD6 */ + 1 4 2 0 2 0 /* RxD7 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 f 2 0 1 0 /* RX_DV */ + 0 10 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0>; /* GTX125 - CLK9 */ + }; + + diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt new file mode 100644 index 000000000000..e47734bee3f0 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt @@ -0,0 +1,70 @@ +* UCC (Unified Communications Controllers) + +Required properties: +- device_type : should be "network", "hldc", "uart", "transparent" + "bisync", "atm", or "serial". +- compatible : could be "ucc_geth" or "fsl_atm" and so on. +- cell-index : the ucc number(1-8), corresponding to UCCx in UM. +- reg : Offset and length of the register set for the device +- interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. +- pio-handle : The phandle for the Parallel I/O port configuration. +- port-number : for UART drivers, the port number to use, between 0 and 3. + This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0. + The port number is added to the minor number of the device. Unlike the + CPM UART driver, the port-number is required for the QE UART driver. +- soft-uart : for UART drivers, if specified this means the QE UART device + driver should use "Soft-UART" mode, which is needed on some SOCs that have + broken UART hardware. Soft-UART is provided via a microcode upload. +- rx-clock-name: the UCC receive clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- tx-clock-name: the UCC transmit clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +The following two properties are deprecated. rx-clock has been replaced +with rx-clock-name, and tx-clock has been replaced with tx-clock-name. +Drivers that currently use the deprecated properties should continue to +do so, in order to support older device trees, but they should be updated +to check for the new properties first. +- rx-clock : represents the UCC receive clock source. + 0x00 : clock source is disabled; + 0x1~0x10 : clock source is BRG1~BRG16 respectively; + 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. +- tx-clock: represents the UCC transmit clock source; + 0x00 : clock source is disabled; + 0x1~0x10 : clock source is BRG1~BRG16 respectively; + 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. + +Required properties for network device_type: +- mac-address : list of bytes representing the ethernet address. +- phy-handle : The phandle for the PHY connected to this controller. + +Recommended properties: +- phy-connection-type : a string naming the controller/PHY interface type, + i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal + Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only), + "tbi", or "rtbi". + +Example: + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <2000 200>; + interrupts = <a0 0>; + interrupt-parent = <700>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = "none"; + tx-clock = "clk9"; + phy-handle = <212000>; + phy-connection-type = "gmii"; + pio-handle = <140001>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt new file mode 100644 index 000000000000..c8f44d6bcbcf --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt @@ -0,0 +1,22 @@ +* USB (Universal Serial Bus Controller) + +Required properties: +- compatible : could be "qe_udc" or "fhci-hcd". +- mode : the could be "host" or "slave". +- reg : Offset and length of the register set for the device +- interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Example(slave): + usb@6c0 { + compatible = "qe_udc"; + reg = <6c0 40>; + interrupts = <8b 0>; + interrupt-parent = <700>; + mode = "slave"; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt new file mode 100644 index 000000000000..b35f3482e3e4 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt @@ -0,0 +1,21 @@ +* Serial + +Currently defined compatibles: +- fsl,cpm1-smc-uart +- fsl,cpm2-smc-uart +- fsl,cpm1-scc-uart +- fsl,cpm2-scc-uart +- fsl,qe-uart + +Example: + + serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a00 20 8000 100>; + interrupts = <28 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt new file mode 100644 index 000000000000..deb35de70988 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt @@ -0,0 +1,18 @@ +* Freescale Display Interface Unit + +The Freescale DIU is a LCD controller, with proper hardware, it can also +drive DVI monitors. + +Required properties: +- compatible : should be "fsl-diu". +- reg : should contain at least address and length of the DIU register + set. +- Interrupts : one DIU interrupt should be describe here. + +Example (MPC8610HPCD): + display@2c000 { + compatible = "fsl,diu"; + reg = <0x2c000 100>; + interrupts = <72 2>; + interrupt-parent = <&mpic>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt new file mode 100644 index 000000000000..86826df00e64 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt @@ -0,0 +1,127 @@ +* Freescale 83xx DMA Controller + +Freescale PowerPC 83xx have on chip general purpose DMA controllers. + +Required properties: + +- compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma", where CHIP is the processor + (mpc8349, mpc8360, etc.) and the second is + "fsl,elo-dma" +- reg : <registers mapping for DMA general status reg> +- ranges : Should be defined as specified in 1) to describe the + DMA controller channels. +- cell-index : controller index. 0 for controller @ 0x8100 +- interrupts : <interrupt mapping for DMA IRQ> +- interrupt-parent : optional, if needed for interrupt mapping + + +- DMA channel nodes: + - compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma-channel", where CHIP is the processor + (mpc8349, mpc8350, etc.) and the second is + "fsl,elo-dma-channel" + - reg : <registers mapping for channel> + - cell-index : dma channel index starts at 0. + +Optional properties: + - interrupts : <interrupt mapping for DMA channel IRQ> + (on 83xx this is expected to be identical to + the interrupts property of the parent node) + - interrupt-parent : optional, if needed for interrupt mapping + +Example: + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <82a8 4>; + ranges = <0 8100 1a4>; + interrupt-parent = <&ipic>; + interrupts = <47 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <0>; + reg = <0 80>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <1>; + reg = <80 80>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <2>; + reg = <100 80>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <3>; + reg = <180 80>; + }; + }; + +* Freescale 85xx/86xx DMA Controller + +Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers. + +Required properties: + +- compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma", where CHIP is the processor + (mpc8540, mpc8540, etc.) and the second is + "fsl,eloplus-dma" +- reg : <registers mapping for DMA general status reg> +- cell-index : controller index. 0 for controller @ 0x21000, + 1 for controller @ 0xc000 +- ranges : Should be defined as specified in 1) to describe the + DMA controller channels. + +- DMA channel nodes: + - compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma-channel", where CHIP is the processor + (mpc8540, mpc8560, etc.) and the second is + "fsl,eloplus-dma-channel" + - cell-index : dma channel index starts at 0. + - reg : <registers mapping for channel> + - interrupts : <interrupt mapping for DMA channel IRQ> + - interrupt-parent : optional, if needed for interrupt mapping + +Example: + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <21300 4>; + ranges = <0 21100 200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0 80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <14 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <80 80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <15 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <100 80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <180 80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <17 2>; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/gtm.txt b/Documentation/powerpc/dts-bindings/fsl/gtm.txt new file mode 100644 index 000000000000..9a33efded4bc --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/gtm.txt @@ -0,0 +1,31 @@ +* Freescale General-purpose Timers Module + +Required properties: + - compatible : should be + "fsl,<chip>-gtm", "fsl,gtm" for SOC GTMs + "fsl,<chip>-qe-gtm", "fsl,qe-gtm", "fsl,gtm" for QE GTMs + "fsl,<chip>-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs + - reg : should contain gtm registers location and length (0x40). + - interrupts : should contain four interrupts. + - interrupt-parent : interrupt source phandle. + - clock-frequency : specifies the frequency driving the timer. + +Example: + +timer@500 { + compatible = "fsl,mpc8360-gtm", "fsl,gtm"; + reg = <0x500 0x40>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + /* filled by u-boot */ + clock-frequency = <0>; +}; + +timer@440 { + compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* filled by u-boot */ + clock-frequency = <0>; +}; diff --git a/Documentation/powerpc/dts-bindings/fsl/guts.txt b/Documentation/powerpc/dts-bindings/fsl/guts.txt new file mode 100644 index 000000000000..9e7a2417dac5 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/guts.txt @@ -0,0 +1,25 @@ +* Global Utilities Block + +The global utilities block controls power management, I/O device +enabling, power-on-reset configuration monitoring, general-purpose +I/O signal configuration, alternate function selection for multiplexed +signals, and clock control. + +Required properties: + + - compatible : Should define the compatible device type for + global-utilities. + - reg : Offset and length of the register set for the device. + +Recommended properties: + + - fsl,has-rstcr : Indicates that the global utilities register set + contains a functioning "reset control register" (i.e. the board + is wired to reset upon setting the HRESET_REQ bit in this register). + +Example: + global-utilities@e0000 { /* global utilities block */ + compatible = "fsl,mpc8548-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt new file mode 100644 index 000000000000..d0ab33e21fe6 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -0,0 +1,32 @@ +* I2C + +Required properties : + + - device_type : Should be "i2c" + - reg : Offset and length of the register set for the device + +Recommended properties : + + - compatible : Should be "fsl-i2c" for parts compatible with + Freescale I2C specifications. + - interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - dfsrr : boolean; if defined, indicates that this I2C device has + a digital filter sampling rate register + - fsl5200-clocking : boolean; if defined, indicated that this device + uses the FSL 5200 clocking mechanism. + +Example : + i2c@3000 { + interrupt-parent = <40000>; + interrupts = <1b 3>; + reg = <3000 18>; + device_type = "i2c"; + compatible = "fsl-i2c"; + dfsrr; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/lbc.txt b/Documentation/powerpc/dts-bindings/fsl/lbc.txt new file mode 100644 index 000000000000..3300fec501c5 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/lbc.txt @@ -0,0 +1,35 @@ +* Chipselect/Local Bus + +Properties: +- name : Should be localbus +- #address-cells : Should be either two or three. The first cell is the + chipselect number, and the remaining cells are the + offset into the chipselect. +- #size-cells : Either one or two, depending on how large each chipselect + can be. +- ranges : Each range corresponds to a single chipselect, and cover + the entire access window as configured. + +Example: + localbus@f0010100 { + compatible = "fsl,mpc8272-localbus", + "fsl,pq2-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <f0010100 40>; + + ranges = <0 0 fe000000 02000000 + 1 0 f4500000 00008000>; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0 0 2000000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <1 0 20>; + compatible = "fsl,mpc8272ads-bcsr"; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt new file mode 100644 index 000000000000..b26b91992c55 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt @@ -0,0 +1,36 @@ +* Freescale MSI interrupt controller + +Reguired properities: +- compatible : compatible list, contains 2 entries, + first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, + etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on + the parent type. +- reg : should contain the address and the length of the shared message + interrupt register set. +- msi-available-ranges: use <start count> style section to define which + msi interrupt can be used in the 256 msi interrupts. This property is + optional, without this, all the 256 MSI interrupts can be used. +- interrupts : each one of the interrupts here is one entry per 32 MSIs, + and routed to the host interrupt controller. the interrupts should + be set as edge sensitive. +- interrupt-parent: the phandle for the interrupt controller + that services interrupts for this device. for 83xx cpu, the interrupts + are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed + to MPIC. + +Example: + msi@41600 { + compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/sata.txt b/Documentation/powerpc/dts-bindings/fsl/sata.txt new file mode 100644 index 000000000000..b46bcf46c3d8 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/sata.txt @@ -0,0 +1,29 @@ +* Freescale 8xxx/3.0 Gb/s SATA nodes + +SATA nodes are defined to describe on-chip Serial ATA controllers. +Each SATA port should have its own node. + +Required properties: +- compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-sata", where CHIP is the processor + (mpc8315, mpc8379, etc.) and the second is + "fsl,pq-sata" +- interrupts : <interrupt mapping for SATA IRQ> +- cell-index : controller index. + 1 for controller @ 0x18000 + 2 for controller @ 0x19000 + 3 for controller @ 0x1a000 + 4 for controller @ 0x1b000 + +Optional properties: +- interrupt-parent : optional, if needed for interrupt mapping +- reg : <registers mapping> + +Example: + sata@18000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <2c 8>; + interrupt-parent = < &ipic >; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/sec.txt b/Documentation/powerpc/dts-bindings/fsl/sec.txt new file mode 100644 index 000000000000..2b6f2d45c45a --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/sec.txt @@ -0,0 +1,68 @@ +Freescale SoC SEC Security Engines + +Required properties: + +- compatible : Should contain entries for this and backward compatible + SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" +- reg : Offset and length of the register set for the device +- interrupts : the SEC's interrupt number +- fsl,num-channels : An integer representing the number of channels + available. +- fsl,channel-fifo-len : An integer representing the number of + descriptor pointers each channel fetch fifo can hold. +- fsl,exec-units-mask : The bitmask representing what execution units + (EUs) are available. It's a single 32-bit cell. EU information + should be encoded following the SEC's Descriptor Header Dword + EU_SEL0 field documentation, i.e. as follows: + + bit 0 = reserved - should be 0 + bit 1 = set if SEC has the ARC4 EU (AFEU) + bit 2 = set if SEC has the DES/3DES EU (DEU) + bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A) + bit 4 = set if SEC has the random number generator EU (RNG) + bit 5 = set if SEC has the public key EU (PKEU) + bit 6 = set if SEC has the AES EU (AESU) + bit 7 = set if SEC has the Kasumi EU (KEU) + bit 8 = set if SEC has the CRC EU (CRCU) + bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B) + +remaining bits are reserved for future SEC EUs. + +- fsl,descriptor-types-mask : The bitmask representing what descriptors + are available. It's a single 32-bit cell. Descriptor type information + should be encoded following the SEC's Descriptor Header Dword DESC_TYPE + field documentation, i.e. as follows: + + bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type + bit 1 = set if SEC supports the ipsec_esp descriptor type + bit 2 = set if SEC supports the common_nonsnoop desc. type + bit 3 = set if SEC supports the 802.11i AES ccmp desc. type + bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type + bit 5 = set if SEC supports the srtp descriptor type + bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type + bit 7 = set if SEC supports the pkeu_assemble descriptor type + bit 8 = set if SEC supports the aesu_key_expand_output desc.type + bit 9 = set if SEC supports the pkeu_ptmul descriptor type + bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type + bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type + + ..and so on and so forth. + +Optional properties: + +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Example: + + /* MPC8548E */ + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <29 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt new file mode 100644 index 000000000000..e7d9a344c4f4 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/spi.txt @@ -0,0 +1,24 @@ +* SPI (Serial Peripheral Interface) + +Required properties: +- cell-index : SPI controller index. +- compatible : should be "fsl,spi". +- mode : the SPI operation mode, it can be "cpu" or "cpu-qe". +- reg : Offset and length of the register set for the device +- interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Example: + spi@4c0 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <4c0 40>; + interrupts = <82 0>; + interrupt-parent = <700>; + mode = "cpu"; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt new file mode 100644 index 000000000000..d100555d488a --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt @@ -0,0 +1,38 @@ +Freescale Synchronous Serial Interface + +The SSI is a serial device that communicates with audio codecs. It can +be programmed in AC97, I2S, left-justified, or right-justified modes. + +Required properties: +- compatible : compatible list, containing "fsl,ssi" +- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on +- reg : offset and length of the register set for the device +- interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and + level information for the interrupt. This should be + encoded based on the information in section 2) + depending on the type of interrupt controller you + have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. +- fsl,mode : the operating mode for the SSI interface + "i2s-slave" - I2S mode, SSI is clock slave + "i2s-master" - I2S mode, SSI is clock master + "lj-slave" - left-justified mode, SSI is clock slave + "lj-master" - l.j. mode, SSI is clock master + "rj-slave" - right-justified mode, SSI is clock slave + "rj-master" - r.j., SSI is clock master + "ac97-slave" - AC97 mode, SSI is clock slave + "ac97-master" - AC97 mode, SSI is clock master + +Optional properties: +- codec-handle : phandle to a 'codec' node that defines an audio + codec connected to this SSI. This node is typically + a child of an I2C or other control node. + +Child 'codec' node required properties: +- compatible : compatible list, contains the name of the codec + +Child 'codec' node optional properties: +- clock-frequency : The frequency of the input clock, which typically + comes from an on-board dedicated oscillator. diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt new file mode 100644 index 000000000000..583ef6b56c43 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt @@ -0,0 +1,69 @@ +* MDIO IO device + +The MDIO is a bus to which the PHY devices are connected. For each +device that exists on this bus, a child node should be created. See +the definition of the PHY node below for an example of how to define +a PHY. + +Required properties: + - reg : Offset and length of the register set for the device + - compatible : Should define the compatible device type for the + mdio. Currently, this is most likely to be "fsl,gianfar-mdio" + +Example: + + mdio@24520 { + reg = <24520 20>; + compatible = "fsl,gianfar-mdio"; + + ethernet-phy@0 { + ...... + }; + }; + + +* Gianfar-compatible ethernet nodes + +Required properties: + + - device_type : Should be "network" + - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" + - compatible : Should be "gianfar" + - reg : Offset and length of the register set for the device + - mac-address : List of bytes representing the ethernet address of + this controller + - interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - phy-handle : The phandle for the PHY connected to this ethernet + controller. + - fixed-link : <a b c d e> where a is emulated phy id - choose any, + but unique to the all specified fixed-links, b is duplex - 0 half, + 1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no + pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause. + +Recommended properties: + + - phy-connection-type : a string naming the controller/PHY interface type, + i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii", + "tbi", or "rtbi". This property is only really needed if the connection + is of type "rgmii-id", as all other connection types are detected by + hardware. + + +Example: + ethernet@24000 { + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 3 e 3 12 3>; + interrupt-parent = <40000>; + phy-handle = <2452000> + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/usb.txt b/Documentation/powerpc/dts-bindings/fsl/usb.txt new file mode 100644 index 000000000000..b00152402694 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/usb.txt @@ -0,0 +1,59 @@ +Freescale SOC USB controllers + +The device node for a USB controller that is part of a Freescale +SOC is as described in the document "Open Firmware Recommended +Practice : Universal Serial Bus" with the following modifications +and additions : + +Required properties : + - compatible : Should be "fsl-usb2-mph" for multi port host USB + controllers, or "fsl-usb2-dr" for dual role USB controllers + - phy_type : For multi port host USB controllers, should be one of + "ulpi", or "serial". For dual role USB controllers, should be + one of "ulpi", "utmi", "utmi_wide", or "serial". + - reg : Offset and length of the register set for the device + - port0 : boolean; if defined, indicates port0 is connected for + fsl-usb2-mph compatible controllers. Either this property or + "port1" (or both) must be defined for "fsl-usb2-mph" compatible + controllers. + - port1 : boolean; if defined, indicates port1 is connected for + fsl-usb2-mph compatible controllers. Either this property or + "port0" (or both) must be defined for "fsl-usb2-mph" compatible + controllers. + - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible + controllers. Can be "host", "peripheral", or "otg". Default to + "host" if not defined for backward compatibility. + +Recommended properties : + - interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Example multi port host USB controller device node : + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <22000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <27 1>; + phy_type = "ulpi"; + port0; + port1; + }; + +Example dual role USB controller device node : + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 1>; + dr_mode = "otg"; + phy = "ulpi"; + }; diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt index d16011a8618e..709ca991a451 100644 --- a/Documentation/scsi/aacraid.txt +++ b/Documentation/scsi/aacraid.txt @@ -56,19 +56,33 @@ Supported Cards/Chipsets 9005:0285:9005:02d1 Adaptec 5405 (Voodoo40) 9005:0285:15d9:02d2 SMC AOC-USAS-S8i-LP 9005:0285:15d9:02d3 SMC AOC-USAS-S8iR-LP - 9005:0285:9005:02d4 Adaptec 2045 (Voodoo04 Lite) - 9005:0285:9005:02d5 Adaptec 2405 (Voodoo40 Lite) - 9005:0285:9005:02d6 Adaptec 2445 (Voodoo44 Lite) - 9005:0285:9005:02d7 Adaptec 2805 (Voodoo80 Lite) + 9005:0285:9005:02d4 Adaptec ASR-2045 (Voodoo04 Lite) + 9005:0285:9005:02d5 Adaptec ASR-2405 (Voodoo40 Lite) + 9005:0285:9005:02d6 Adaptec ASR-2445 (Voodoo44 Lite) + 9005:0285:9005:02d7 Adaptec ASR-2805 (Voodoo80 Lite) + 9005:0285:9005:02d8 Adaptec 5405G (Voodoo40 PM) + 9005:0285:9005:02d9 Adaptec 5445G (Voodoo44 PM) + 9005:0285:9005:02da Adaptec 5805G (Voodoo80 PM) + 9005:0285:9005:02db Adaptec 5085G (Voodoo08 PM) + 9005:0285:9005:02dc Adaptec 51245G (Voodoo124 PM) + 9005:0285:9005:02dd Adaptec 51645G (Voodoo164 PM) + 9005:0285:9005:02de Adaptec 52445G (Voodoo244 PM) + 9005:0285:9005:02df Adaptec ASR-2045G (Voodoo04 Lite PM) + 9005:0285:9005:02e0 Adaptec ASR-2405G (Voodoo40 Lite PM) + 9005:0285:9005:02e1 Adaptec ASR-2445G (Voodoo44 Lite PM) + 9005:0285:9005:02e2 Adaptec ASR-2805G (Voodoo80 Lite PM) 1011:0046:9005:0364 Adaptec 5400S (Mustang) + 1011:0046:9005:0365 Adaptec 5400S (Mustang) 9005:0287:9005:0800 Adaptec Themisto (Jupiter) 9005:0200:9005:0200 Adaptec Themisto (Jupiter) 9005:0286:9005:0800 Adaptec Callisto (Jupiter) 1011:0046:9005:1364 Dell PERC 2/QC (Quad Channel, Mustang) + 1011:0046:9005:1365 Dell PERC 2/QC (Quad Channel, Mustang) 1028:0001:1028:0001 Dell PERC 2/Si (Iguana) 1028:0003:1028:0003 Dell PERC 3/Si (SlimFast) 1028:0002:1028:0002 Dell PERC 3/Di (Opal) - 1028:0004:1028:0004 Dell PERC 3/DiF (Iguana) + 1028:0004:1028:0004 Dell PERC 3/SiF (Iguana) + 1028:0004:1028:00d0 Dell PERC 3/DiF (Iguana) 1028:0002:1028:00d1 Dell PERC 3/DiV (Viper) 1028:0002:1028:00d9 Dell PERC 3/DiL (Lexus) 1028:000a:1028:0106 Dell PERC 3/DiJ (Jaguar) |