Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull late ARM soc platform updates from Olof Johansson:
 "This branch contains updates to OMAP and Marvell platforms (kirkwood,
  dove, mvebu) that came in after we had done the big multiplatform
  merges, so they were kept separate from the rest, and not separated
  into the traditional topics of cleanup/driver/platform features.

  For OMAP, the updates are:
   - Runtime PM conversions for the GPMC and RNG IP blocks
   - Preparation patches for the OMAP common clock framework conversion
   - clkdev alias additions required by other drivers
   - Performance Monitoring Unit (PMU) support for OMAP2, 3, and
     non-4430 OMAP4
   - OMAP hwmod code and data improvements
   - Preparation patches for the IOMMU runtime PM conversion
   - Preparation patches for OMAP4 full-chip retention support

  For Kirkwood/Dove/mvebu:
   - New driver for "address decoder controller" for mvebu, which is a
     piece of hardware that configures addressable devices and
     peripherals.  First user is the boot rom aperture on armada XP
     since it is needed for SMP support.
   - New device tree bindings for peripherals such as gpio-fan, iconnect
     nand, mv_cesa and the above address decoder controller.
   - Some defconfig updates, mostly to enable new DT boards and a few
     drivers.
   - New drivers using the pincontrol subsystem for dove, kirkwood and
     mvebu
   - New clean gpio driver for mvebu"

* tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits)
  ARM: mvebu: fix build breaks from multi-platform conversion
  ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70
  ARM: OMAP2+: PMU: Add runtime PM support
  ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD
  ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
  ARM: OMAP3: hwmod data: Add debugss HWMOD data
  ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems
  ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP
  hwrng: OMAP: remove SoC restrictions from driver registration
  ARM: OMAP: split OMAP1, OMAP2+ RNG device registration
  hwrng: OMAP: convert to use runtime PM
  hwrng: OMAP: store per-device data in per-device variables, not file statics
  ARM: OMAP2xxx: hwmod/CM: add RNG integration data
  ARM: OMAP2+: gpmc: minimal driver support
  ARM: OMAP2+: gpmc: Adapt to HWMOD
  ARM: OMAP2/3: hwmod data: add gpmc
  ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp
  ARM: OMAP3: hwmod data: add mmu data for iva and isp
  ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected
  ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks
  ...

17 files changed, 776 insertions, 4 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4745c1f68b49..29f541f0e653 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -17,6 +17,9 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
 	usb_a9263.dtb \
 	usb_a9g20.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
+	dove-cubox.dtb \
+	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
@@ -33,10 +36,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
 dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
 	kirkwood-goflexnet.dtb \
 	kirkwood-ib62x0.dtb \
 	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-km_kirkwood.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-ts219-6281.dtb \
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 6b6b932a5a7d..16cc82cdaa81 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -63,6 +63,11 @@
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
 		};
+
+		addr-decoding@d0020000 {
+			compatible = "marvell,armada-addr-decoding-controller";
+			reg = <0xd0020000 0x258>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 3228ccc83332..2069151afe01 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -21,6 +21,12 @@
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
 	mpic: interrupt-controller@d0020000 {
 	      reg = <0xd0020a00 0x1d0>,
 		    <0xd0021870 0x58>;
@@ -31,5 +37,43 @@
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x100>;
 		};
+
+		pinctrl {
+			compatible = "marvell,mv88f6710-pinctrl";
+			reg = <0xd0018000 0x38>;
+	        };
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <82>, <83>, <84>, <85>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <87>, <88>, <89>, <90>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
+			ngpios = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <91>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f97040d4258d..b1fc728515e9 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,11 +14,11 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp.dtsi"
+/include/ "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
new file mode 100644
index 000000000000..ea355192be6f
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78230-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <17>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
new file mode 100644
index 000000000000..2057863f3dfa
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78260-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
new file mode 100644
index 000000000000..ffac98373792
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78460-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+ };
diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts
new file mode 100644
index 000000000000..61a8062e56de
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cm-a510.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
new file mode 100644
index 000000000000..0adbd5a38095
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
new file mode 100644
index 000000000000..e5a920beab45
--- /dev/null
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	spi-flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
new file mode 100644
index 000000000000..96fb824b5e6e
--- /dev/null
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -0,0 +1,143 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf1020204 0x04>,
+		      <0xf1020214 0x04>;
+	};
+
+	mbus@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0 0xf1000000 0x4000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <7>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <8>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart2: serial@12200 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <9>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart3: serial@12300 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <10>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		wdt: wdt@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>;
+		};
+
+		gpio0: gpio@d0400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0400 0x20>;
+			ngpio = <32>;
+			interrupts = <12>, <13>, <14>, <60>;
+		};
+
+		gpio1: gpio@d0420 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0420 0x20>;
+			ngpio = <32>;
+			interrupts = <61>;
+		};
+
+		gpio2: gpio@e8400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xe8400 0x0c>;
+			ngpio = <8>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <6>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		spi1: spi@14600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <5>;
+			reg = <0x14600 0x28>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clock-frequency = <400000>;
+			timeout-ms = <1000>;
+			status = "disabled";
+		};
+
+		sdio0: sdio@92000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x92000 0x100>;
+			interrupts = <35>, <37>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@90000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x90000 0x100>;
+			interrupts = <36>, <38>;
+			status = "disabled";
+		};
+
+		sata0: sata@a0000 {
+			compatible = "marvell,orion-sata";
+			reg = <0xa0000 0x2400>;
+			interrupts = <62>;
+			nr-ports = <1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 7408655f91b5..9b32d0272825 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -25,6 +25,16 @@
 		};
 	};
 
+	gpio_fan {
+		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+		compatible = "gpio-fan";
+		gpios = <&gpio1 14 1
+			 &gpio1 13 1>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+	};
+
 	ocp@f1000000 {
 		sata@80000 {
 			status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
new file mode 100644
index 000000000000..08a582414b88
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "data";
+				reg = <0x0500000 0xfb00000>;
+			};
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index f8ca6fa88192..d97cd9d4753e 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -12,7 +12,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)";
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
 		linux,initrd-start = <0x4500040>;
 		linux,initrd-end   = <0x4800000>;
 	};
@@ -30,7 +30,37 @@
 			clock-frequency = <200000000>;
 			status = "ok";
 		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0xc0000>;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			partition@100000 {
+				label = "zImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@540000 {
+				label = "initrd";
+				reg = <0x540000 0x300000>;
+			};
+
+			partition@980000 {
+				label = "boot";
+				reg = <0x980000 0x1f400000>;
+			};
+		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -69,4 +99,22 @@
 			gpios = <&gpio1 16 0>;
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+			debounce-interval = <100>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
new file mode 100644
index 000000000000..865aeec40a26
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -0,0 +1,105 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@400000 {
+				label = "uInitrd";
+				reg = <0x540000 0x1000000>;
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 0>;
+			linux,default-trigger = "default-on";
+		};
+		health_led1 {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 0>;
+		};
+		health_led2 {
+			label = "status:white:health_led";
+			gpios = <&gpio1 4 0>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 0>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		Power {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio0 14 1>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
new file mode 100644
index 000000000000..75bdb93fed26
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "ok";
+			chip-delay = <25>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index cef9616f330a..4e5b8154a5be 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -14,7 +14,8 @@
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x4000000>;
+		ranges = <0x00000000 0xf1000000 0x4000000
+		          0xf5000000 0xf5000000 0x0000400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -105,5 +106,14 @@
 			clock-frequency = <100000>;
 			status = "disabled";
 		};
+
+		crypto@30000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x30000 0x10000>,
+			      <0xf5000000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			status = "okay";
+		};
 	};
 };