ARM: OMAP2+: Remove legacy support for zoom platforms

We now have pretty decent device tree based support for
zoom platforms. It's not complete, but basics work for
me so adding more features should be quite trivial.

Looks like also 3630 sdp is zoom based, and looking
at it's board file should also be trivial to support
with the device tree based booting.

Patches are welcome if people are still using these.

Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 0 insertions, 139 deletions

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
deleted file mode 100644
index 42e5f231a799..000000000000
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-#include "board-zoom.h"
-
-#include "soc.h"
-#include "common.h"
-
-#define ZOOM_SMSC911X_CS	7
-#define ZOOM_SMSC911X_GPIO	158
-#define ZOOM_QUADUART_CS	3
-#define ZOOM_QUADUART_GPIO	102
-#define ZOOM_QUADUART_RST_GPIO	152
-#define QUART_CLK		1843200
-#define DEBUG_BASE		0x08000000
-#define ZOOM_ETHR_START	DEBUG_BASE
-
-static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = {
-	.cs             = ZOOM_SMSC911X_CS,
-	.gpio_irq       = ZOOM_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init zoom_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&zoom_smsc911x_cfg);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= ZOOM_UART_BASE,
-		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
-		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= QUART_CLK,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device zoom_debugboard_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static inline void __init zoom_init_quaduart(void)
-{
-	int quart_cs;
-	unsigned long cs_mem_base;
-	int quart_gpio = 0;
-
-	if (gpio_request_one(ZOOM_QUADUART_RST_GPIO,
-				GPIOF_OUT_INIT_LOW,
-				"TL16CP754C GPIO") < 0) {
-		pr_err("Failed to request GPIO%d for TL16CP754C\n",
-			ZOOM_QUADUART_RST_GPIO);
-		return;
-	}
-
-	quart_cs = ZOOM_QUADUART_CS;
-
-	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
-		pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
-		return;
-	}
-
-	quart_gpio = ZOOM_QUADUART_GPIO;
-
-	if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
-		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
-								quart_gpio);
-
-	serial_platform_data[0].irq = gpio_to_irq(102);
-}
-
-static inline int omap_zoom_debugboard_detect(void)
-{
-	int debug_board_detect = 0;
-	int ret = 1;
-
-	debug_board_detect = ZOOM_SMSC911X_GPIO;
-
-	if (gpio_request_one(debug_board_detect, GPIOF_IN,
-			     "Zoom debug board detect") < 0) {
-		pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
-		       debug_board_detect);
-		return 0;
-	}
-
-	if (!gpio_get_value(debug_board_detect)) {
-		ret = 0;
-	}
-	gpio_free(debug_board_detect);
-	return ret;
-}
-
-static struct platform_device *zoom_devices[] __initdata = {
-	&zoom_debugboard_serial_device,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-int __init zoom_debugboard_init(void)
-{
-	if (!omap_zoom_debugboard_detect())
-		return 0;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	zoom_init_smsc911x();
-	zoom_init_quaduart();
-	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
-}