ARM: OMAP3: Add minimal omap3430 support

Add minimal omap3430 support based on earlier patches from
Syed Mohammed Khasim. Also merge in omap34xx SRAM support
from Karthik Dasu and use consistent naming for sram init
functions.

Also do following changes that make 34xx support usable:

- Remove unused sram.c functions for 34xx

- Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally
  in entry-macro.S

- Update mach-omap2/io.c to support 2420, 2430, and 34xx

- Also merge in 34xx GPMC changes to add fields wr_access and
  wr_data_mux_bus from Adrian Hunter

- Remove memory initialization call omap2_init_memory() until
  until more generic memory initialization patches are posted.
  It's OK to rely on bootloader initialization until then.

Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com>
Signed-off-by: Karthik Dasu<karthik-dp@ti.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

12 files changed, 101 insertions, 12 deletions

diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b0039bdeb4e..1b11f5c6a2d9 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -35,6 +35,18 @@
 #ifdef CONFIG_OMAP_LL_DEBUG_UART3
 		add	\rx, \rx, #0x00004000	@ UART 3
 #endif
+
+#elif	CONFIG_ARCH_OMAP3
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xd8000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00fb0000	@ UART 3
+		add	\rx, \rx, #0x00006000
+#endif
 #endif
 		.endm
 
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index d4e9043bf201..030118ee204a 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -55,9 +55,17 @@
 1510:
 		.endm
 
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 
+#if defined(CONFIG_ARCH_OMAP24XX)
 #include <mach/omap24xx.h>
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+#include <mach/omap34xx.h>
+#endif
+
+#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt number */
 
 		.macro	disable_fiq
 		.endm
@@ -79,7 +87,7 @@
 		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
 		cmp	\irqnr, #0x0
 2222:
-		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
+		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
 
 		.endm
 
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 3c7b425c585e..45b678439bb7 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -84,6 +84,10 @@ struct gpmc_timings {
 	u16 access;		/* Start-cycle to first data valid delay */
 	u16 rd_cycle;		/* Total read cycle time */
 	u16 wr_cycle;		/* Total write cycle time */
+
+	/* The following are only on OMAP3430 */
+	u16 wr_access;		/* WRACCESSTIME */
+	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
 };
 
 extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index dd0cf069431d..adc83b7b8205 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -73,7 +73,6 @@
 #define L4_24XX_VIRT	0xd8000000
 #define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
 
-#ifdef CONFIG_ARCH_OMAP2430
 #define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
 #define L4_WK_243X_VIRT		0xd9000000
 #define L4_WK_243X_SIZE		SZ_1M
@@ -87,8 +86,6 @@
 #define OMAP243X_SMS_VIRT	0xFC000000
 #define OMAP243X_SMS_SIZE	SZ_1M
 
-#endif
-
 #define IO_OFFSET		0x90000000
 #define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
 #define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index e9fd63055cb2..9ee04969d366 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -286,6 +286,41 @@
 #define INT_24XX_USB_IRQ_OTG	80
 #define INT_24XX_MMC_IRQ	83
 
+#define INT_34XX_BENCH_MPU_EMUL	3
+#define INT_34XX_ST_MCBSP2_IRQ	4
+#define INT_34XX_ST_MCBSP3_IRQ	5
+#define INT_34XX_SSM_ABORT_IRQ	6
+#define INT_34XX_SYS_NIRQ	7
+#define INT_34XX_D2D_FW_IRQ	8
+#define INT_34XX_PRCM_MPU_IRQ	11
+#define INT_34XX_MCBSP1_IRQ	16
+#define INT_34XX_MCBSP2_IRQ	17
+#define INT_34XX_MCBSP3_IRQ	22
+#define INT_34XX_MCBSP4_IRQ	23
+#define INT_34XX_CAM_IRQ	24
+#define INT_34XX_MCBSP5_IRQ	27
+#define INT_34XX_GPIO_BANK1	29
+#define INT_34XX_GPIO_BANK2	30
+#define INT_34XX_GPIO_BANK3	31
+#define INT_34XX_GPIO_BANK4	32
+#define INT_34XX_GPIO_BANK5	33
+#define INT_34XX_GPIO_BANK6	34
+#define INT_34XX_USIM_IRQ	35
+#define INT_34XX_WDT3_IRQ	36
+#define INT_34XX_SPI4_IRQ	48
+#define INT_34XX_SHA1MD52_IRQ	49
+#define INT_34XX_FPKA_READY_IRQ	50
+#define INT_34XX_SHA1MD51_IRQ	51
+#define INT_34XX_RNG_IRQ	52
+#define INT_34XX_I2C3_IRQ	61
+#define INT_34XX_FPKA_ERROR_IRQ	64
+#define INT_34XX_PBIAS_IRQ	75
+#define INT_34XX_OHCI_IRQ	76
+#define INT_34XX_EHCI_IRQ	77
+#define INT_34XX_TLL_IRQ	78
+#define INT_34XX_PARTHASH_IRQ	79
+#define INT_34XX_MMC3_IRQ	94
+#define INT_34XX_GPT12_IRQ	95
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index a3074f2fb7ce..c8d0aa118be7 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -91,7 +91,7 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x04
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index a325caf80d04..d40cac60b959 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,7 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 5670d563f378..6bbf1789bed5 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -723,7 +723,31 @@ enum omap34xx_index {
 	AB12_3430_USB3HS_TLL_DATA4,
 	AB13_3430_USB3HS_TLL_DATA5,
 	AA13_3430_USB3HS_TLL_DATA6,
-	AA12_3430_USB3HS_TLL_DATA7
+	AA12_3430_USB3HS_TLL_DATA7,
+
+	/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+	AF10_3430_USB1FS_PHY_MM1_RXDP,
+	AG9_3430_USB1FS_PHY_MM1_RXDM,
+	W13_3430_USB1FS_PHY_MM1_RXRCV,
+	W12_3430_USB1FS_PHY_MM1_TXSE0,
+	W11_3430_USB1FS_PHY_MM1_TXDAT,
+	Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+	/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+	AF7_3430_USB2FS_PHY_MM2_RXDP,
+	AH7_3430_USB2FS_PHY_MM2_RXDM,
+	AB10_3430_USB2FS_PHY_MM2_RXRCV,
+	AB9_3430_USB2FS_PHY_MM2_TXSE0,
+	W3_3430_USB2FS_PHY_MM2_TXDAT,
+	T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+	/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+	AH3_3430_USB3FS_PHY_MM3_RXDP,
+	AE3_3430_USB3FS_PHY_MM3_RXDM,
+	AD1_3430_USB3FS_PHY_MM3_RXRCV,
+	AE1_3430_USB3FS_PHY_MM3_TXSE0,
+	AD2_3430_USB3FS_PHY_MM3_TXDAT,
+	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
 
 };
 
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 556f0eb4d55c..24335d4932f5 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -39,7 +39,6 @@
 /* interrupt controller */
 #define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
 #define OMAP24XX_IVA_INTC_BASE	0x40000000
-#define IRQ_SIR_IRQ		0x0040
 
 #define OMAP2420_CTRL_BASE	L4_24XX_BASE
 #define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 25ee3819faad..a98c6c3beb2c 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,8 +25,8 @@
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
 #define SDRC_MR_0		0x084
-#define SDRC_ACTIM_CTRL_A	0x09c
-#define SDRC_ACTIM_CTRL_B	0x0a0
+#define SDRC_ACTIM_CTRL_A_0	0x09c
+#define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index e09323449981..ab35d622dcf5 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -21,6 +21,10 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 				      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
+extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
+				     u32 sdrc_actim_ctrla,
+				     u32 sdrc_actim_ctrlb, u32 m2);
+
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
 extern unsigned long omap1_sram_reprogram_clock_sz;
@@ -53,4 +57,10 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 						u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
+
+extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
+					  u32 sdrc_actim_ctrla,
+					  u32 sdrc_actim_ctrlb, u32 m2);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06a28c7b98de..06923f261545 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -40,7 +40,7 @@ static inline void omap1_arch_reset(char mode)
 
 static inline void arch_reset(char mode)
 {
-	if (!cpu_is_omap24xx())
+	if (!cpu_class_is_omap2())
 		omap1_arch_reset(mode);
 	else
 		omap_prcm_arch_reset(mode);