summaryrefslogtreecommitdiff
path: root/arch/ppc/platforms
diff options
context:
space:
mode:
authorSylvain Munaut <tnt@246tNt.com>2006-03-26 13:38:09 +0200
committerPaul Mackerras <paulus@samba.org>2006-03-27 14:49:00 +1100
commit1f5e3b028c5b592b5a792a390c78d609219aebfd (patch)
treef8aec1818e99f8ee485fdc686c73299bcbb6a18a /arch/ppc/platforms
parentf8dd311982c86141f4f2fd326c0edf0c2d9fd97b (diff)
[PATCH] ppc32: Reorganize and complete MPC52xx initial cpu setup
ppc32: Reorganize and complete MPC52xx initial cpu setup This patch splits up the CPU setup into a generic part and a platform specific part. We also add a few missing init at the same time. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/ppc/platforms')
-rw-r--r--arch/ppc/platforms/lite5200.c38
1 files changed, 10 insertions, 28 deletions
diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
index d91efe1dc2d1..fecbe9adc9e0 100644
--- a/arch/ppc/platforms/lite5200.c
+++ b/arch/ppc/platforms/lite5200.c
@@ -36,8 +36,6 @@
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <syslib/mpc52xx_pci.h>
-
extern int powersave_nap;
@@ -99,34 +97,23 @@ lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
static void __init
lite5200_setup_cpu(void)
{
- struct mpc52xx_cdm __iomem *cdm;
struct mpc52xx_gpio __iomem *gpio;
struct mpc52xx_intr __iomem *intr;
- struct mpc52xx_xlb __iomem *xlb;
u32 port_config;
u32 intr_ctrl;
/* Map zones */
- cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
- xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
- if (!cdm || !gpio || !xlb || !intr) {
- printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during"
- "lite5200_setup_cpu\n");
+ if (!gpio || !intr) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping GPIO/INTR during "
+ "lite5200_setup_cpu\n");
goto unmap_regs;
}
- /* Use internal 48 Mhz */
- out_8(&cdm->ext_48mhz_en, 0x00);
- out_8(&cdm->fd_enable, 0x01);
- if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
- out_be16(&cdm->fd_counters, 0x0001);
- else
- out_be16(&cdm->fd_counters, 0x5555);
-
/* Get port mux config */
port_config = in_be32(&gpio->port_config);
@@ -137,17 +124,13 @@ lite5200_setup_cpu(void)
port_config &= ~0x00007000; /* Differential mode - USB1 only */
port_config |= 0x00001000;
+ /* ATA CS is on csb_4/5 */
+ port_config &= ~0x03000000;
+ port_config |= 0x01000000;
+
/* Commit port config */
out_be32(&gpio->port_config, port_config);
- /* Configure the XLB Arbiter */
- out_be32(&xlb->master_pri_enable, 0xff);
- out_be32(&xlb->master_priority, 0x11111111);
-
- /* Enable ram snooping for 1GB window */
- out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
- out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
/* IRQ[0-3] setup */
intr_ctrl = in_be32(&intr->ctrl);
intr_ctrl &= ~0x00ff0000;
@@ -163,9 +146,7 @@ lite5200_setup_cpu(void)
/* Unmap reg zone */
unmap_regs:
- if (cdm) iounmap(cdm);
if (gpio) iounmap(gpio);
- if (xlb) iounmap(xlb);
if (intr) iounmap(intr);
}
@@ -173,7 +154,8 @@ static void __init
lite5200_setup_arch(void)
{
/* CPU & Port mux setup */
- lite5200_setup_cpu();
+ mpc52xx_setup_cpu(); /* Generic */
+ lite5200_setup_cpu(); /* Platform specific */
#ifdef CONFIG_PCI
/* PCI Bridge setup */