summaryrefslogtreecommitdiff
path: root/arch/sh64
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/sh64
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/sh64')
-rw-r--r--arch/sh64/Kconfig293
-rw-r--r--arch/sh64/Kconfig.debug44
-rw-r--r--arch/sh64/Makefile116
-rw-r--r--arch/sh64/boot/Makefile20
-rw-r--r--arch/sh64/boot/compressed/Makefile46
-rw-r--r--arch/sh64/boot/compressed/cache.c39
-rw-r--r--arch/sh64/boot/compressed/head.S164
-rw-r--r--arch/sh64/boot/compressed/install.sh56
-rw-r--r--arch/sh64/boot/compressed/misc.c251
-rw-r--r--arch/sh64/boot/compressed/vmlinux.lds.S65
-rw-r--r--arch/sh64/configs/cayman_defconfig837
-rw-r--r--arch/sh64/kernel/Makefile36
-rw-r--r--arch/sh64/kernel/alphanum.c45
-rw-r--r--arch/sh64/kernel/asm-offsets.c33
-rw-r--r--arch/sh64/kernel/dma.c297
-rw-r--r--arch/sh64/kernel/early_printk.c105
-rw-r--r--arch/sh64/kernel/entry.S2103
-rw-r--r--arch/sh64/kernel/fpu.c170
-rw-r--r--arch/sh64/kernel/head.S373
-rw-r--r--arch/sh64/kernel/init_task.c46
-rw-r--r--arch/sh64/kernel/irq.c116
-rw-r--r--arch/sh64/kernel/irq_intc.c272
-rw-r--r--arch/sh64/kernel/led.c41
-rw-r--r--arch/sh64/kernel/module.c161
-rw-r--r--arch/sh64/kernel/pci-dma.c50
-rw-r--r--arch/sh64/kernel/pci_sh5.c541
-rw-r--r--arch/sh64/kernel/pci_sh5.h107
-rw-r--r--arch/sh64/kernel/pcibios.c168
-rw-r--r--arch/sh64/kernel/process.c962
-rw-r--r--arch/sh64/kernel/ptrace.c376
-rw-r--r--arch/sh64/kernel/semaphore.c140
-rw-r--r--arch/sh64/kernel/setup.c385
-rw-r--r--arch/sh64/kernel/sh_ksyms.c89
-rw-r--r--arch/sh64/kernel/signal.c727
-rw-r--r--arch/sh64/kernel/switchto.S198
-rw-r--r--arch/sh64/kernel/sys_sh64.c300
-rw-r--r--arch/sh64/kernel/syscalls.S345
-rw-r--r--arch/sh64/kernel/time.c610
-rw-r--r--arch/sh64/kernel/traps.c961
-rw-r--r--arch/sh64/kernel/unwind.c326
-rw-r--r--arch/sh64/kernel/vmlinux.lds.S181
-rw-r--r--arch/sh64/lib/Makefile19
-rw-r--r--arch/sh64/lib/c-checksum.c231
-rw-r--r--arch/sh64/lib/copy_user_memcpy.S217
-rw-r--r--arch/sh64/lib/dbg.c430
-rw-r--r--arch/sh64/lib/io.c140
-rw-r--r--arch/sh64/lib/iomap.c55
-rw-r--r--arch/sh64/lib/memcpy.c82
-rw-r--r--arch/sh64/lib/page_clear.S54
-rw-r--r--arch/sh64/lib/page_copy.S91
-rw-r--r--arch/sh64/lib/panic.c58
-rw-r--r--arch/sh64/lib/udelay.c60
-rw-r--r--arch/sh64/mach-cayman/Makefile11
-rw-r--r--arch/sh64/mach-cayman/iomap.c24
-rw-r--r--arch/sh64/mach-cayman/irq.c196
-rw-r--r--arch/sh64/mach-cayman/led.c51
-rw-r--r--arch/sh64/mach-cayman/setup.c246
-rw-r--r--arch/sh64/mach-harp/Makefile14
-rw-r--r--arch/sh64/mach-harp/setup.c139
-rw-r--r--arch/sh64/mach-romram/Makefile14
-rw-r--r--arch/sh64/mach-romram/setup.c142
-rw-r--r--arch/sh64/mach-sim/Makefile14
-rw-r--r--arch/sh64/mach-sim/setup.c164
-rw-r--r--arch/sh64/mm/Makefile44
-rw-r--r--arch/sh64/mm/cache.c1041
-rw-r--r--arch/sh64/mm/extable.c81
-rw-r--r--arch/sh64/mm/fault.c601
-rw-r--r--arch/sh64/mm/hugetlbpage.c264
-rw-r--r--arch/sh64/mm/init.c196
-rw-r--r--arch/sh64/mm/ioremap.c469
-rw-r--r--arch/sh64/mm/tlb.c166
-rw-r--r--arch/sh64/mm/tlbmiss.c280
-rw-r--r--arch/sh64/oprofile/Kconfig23
-rw-r--r--arch/sh64/oprofile/Makefile12
-rw-r--r--arch/sh64/oprofile/op_model_null.c23
75 files changed, 17847 insertions, 0 deletions
diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig
new file mode 100644
index 000000000000..76eb81fba45e
--- /dev/null
+++ b/arch/sh64/Kconfig
@@ -0,0 +1,293 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
+#
+
+mainmenu "Linux/SH64 Kernel Configuration"
+
+config SUPERH
+ bool
+ default y
+
+config SUPERH64
+ bool
+ default y
+
+config MMU
+ bool
+ default y
+
+config UID16
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config LOG_BUF_SHIFT
+ int
+ default 14
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_ISA_DMA
+ bool
+
+source init/Kconfig
+
+menu "System type"
+
+choice
+ prompt "SuperH system type"
+ default SH_SIMULATOR
+
+config SH_GENERIC
+ bool "Generic"
+
+config SH_SIMULATOR
+ bool "Simulator"
+
+config SH_CAYMAN
+ bool "Cayman"
+
+config SH_ROMRAM
+ bool "ROM/RAM"
+
+config SH_HARP
+ bool "ST50-Harp"
+
+endchoice
+
+choice
+ prompt "Processor family"
+ default CPU_SH5
+
+config CPU_SH5
+ bool "SH-5"
+
+endchoice
+
+choice
+ prompt "Processor type"
+
+config CPU_SUBTYPE_SH5_101
+ bool "SH5-101"
+ depends on CPU_SH5
+
+config CPU_SUBTYPE_SH5_103
+ bool "SH5-103"
+ depends on CPU_SH5
+
+endchoice
+
+choice
+ prompt "Endianness"
+ default LITTLE_ENDIAN
+
+config LITTLE_ENDIAN
+ bool "Little-Endian"
+
+config BIG_ENDIAN
+ bool "Big-Endian"
+
+endchoice
+
+config SH_FPU
+ bool "FPU support"
+ default y
+
+config SH64_FPU_DENORM_FLUSH
+ depends on SH_FPU
+ bool "Flush floating point denorms to zero"
+
+choice
+ prompt "Page table levels"
+ default SH64_PGTABLE_2_LEVEL
+
+config SH64_PGTABLE_2_LEVEL
+ bool "2"
+
+config SH64_PGTABLE_3_LEVEL
+ bool "3"
+
+endchoice
+
+choice
+ prompt "HugeTLB page size"
+ depends on HUGETLB_PAGE && MMU
+ default HUGETLB_PAGE_SIZE_64K
+
+config HUGETLB_PAGE_SIZE_64K
+ bool "64K"
+
+config HUGETLB_PAGE_SIZE_1MB
+ bool "1MB"
+
+config HUGETLB_PAGE_SIZE_512MB
+ bool "512MB"
+
+endchoice
+
+config SH64_USER_MISALIGNED_FIXUP
+ bool "Fixup misaligned loads/stores occurring in user mode"
+
+comment "Memory options"
+
+config CACHED_MEMORY_OFFSET
+ hex "Cached Area Offset"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "20000000"
+
+config MEMORY_START
+ hex "Physical memory start address"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "80000000"
+
+config MEMORY_SIZE_IN_MB
+ int "Memory size (in MB)" if SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "64" if SH_HARP || SH_CAYMAN
+ default "8" if SH_SIMULATOR
+
+comment "Cache options"
+
+config DCACHE_DISABLED
+ bool "DCache Disabling"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+
+choice
+ prompt "DCache mode"
+ depends on !DCACHE_DISABLED && !SH_SIMULATOR
+ default DCACHE_WRITE_BACK
+
+config DCACHE_WRITE_BACK
+ bool "Write-back"
+
+config DCACHE_WRITE_THROUGH
+ bool "Write-through"
+
+endchoice
+
+config ICACHE_DISABLED
+ bool "ICache Disabling"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+
+config PCIDEVICE_MEMORY_START
+ hex
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "C0000000"
+
+config DEVICE_MEMORY_START
+ hex
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "E0000000"
+
+config FLASH_MEMORY_START
+ hex "Flash memory/on-chip devices start address"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "00000000"
+
+config PCI_BLOCK_START
+ hex "PCI block start address"
+ depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
+ default "40000000"
+
+comment "CPU Subtype specific options"
+
+config SH64_ID2815_WORKAROUND
+ bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
+
+comment "Misc options"
+config HEARTBEAT
+ bool "Heartbeat LED"
+
+config HDSP253_LED
+ bool "Support for HDSP-253 LED"
+ depends on SH_CAYMAN
+
+config SH_DMA
+ tristate "DMA controller (DMAC) support"
+
+config PREEMPT
+ bool "Preemptible Kernel (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+
+endmenu
+
+menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+config ISA
+ bool
+
+config SBUS
+ bool
+
+config PCI
+ bool "PCI support"
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+config SH_PCIDMA_NONCOHERENT
+ bool "Cache and PCI noncoherent"
+ depends on PCI
+ default y
+ help
+ Enable this option if your platform does not have a CPU cache which
+ remains coherent with PCI DMA. It is safest to say 'Y', although you
+ will see better performance if you can say 'N', because the PCI DMA
+ code will not have to flush the CPU's caches. If you have a PCI host
+ bridge integrated with your SH CPU, refer carefully to the chip specs
+ to see if you can say 'N' here. Otherwise, leave it as 'Y'.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/sh64/oprofile/Kconfig"
+
+source "arch/sh64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
diff --git a/arch/sh64/Kconfig.debug b/arch/sh64/Kconfig.debug
new file mode 100644
index 000000000000..26d842c07139
--- /dev/null
+++ b/arch/sh64/Kconfig.debug
@@ -0,0 +1,44 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+ bool "Early SCIF console support"
+
+config DEBUG_KERNEL_WITH_GDB_STUB
+ bool "GDB Stub kernel debug"
+
+config SH64_PROC_TLB
+ bool "Debug: report TLB fill/purge activity through /proc/tlb"
+ depends on PROC_FS
+
+config SH64_PROC_ASIDS
+ bool "Debug: report ASIDs through /proc/asids"
+ depends on PROC_FS
+
+config SH64_SR_WATCH
+ bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
+
+config POOR_MANS_STRACE
+ bool "Debug: enable rudimentary strace facility"
+ help
+ This option allows system calls to be traced to the console. It also
+ aids in detecting kernel stack underflow. It is useful for debugging
+ early-userland problems (e.g. init incurring fatal exceptions.)
+
+config SH_ALPHANUMERIC
+ bool "Enable debug outputs to on-board alphanumeric display"
+
+config SH_NO_BSS_INIT
+ bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
+
+config FRAME_POINTER
+ bool "Compile the kernel with frame pointers"
+ default y if KGDB
+ help
+ If you say Y here the resulting kernel image will be slightly larger
+ and slower, but it will give very useful debugging information.
+ If you don't debug the kernel, you can say N, but we may not be able
+ to solve problems without frame pointers.
+
+endmenu
diff --git a/arch/sh64/Makefile b/arch/sh64/Makefile
new file mode 100644
index 000000000000..b4fd8e13fea9
--- /dev/null
+++ b/arch/sh64/Makefile
@@ -0,0 +1,116 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2000, 2001 Paolo Alberelli
+# Copyright (C) 2003, 2004 Paul Mundt
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+#
+
+cpu-y := -mb
+cpu-$(CONFIG_LITTLE_ENDIAN) := -ml
+
+cpu-$(CONFIG_CPU_SH5) += -m5-32media-nofpu
+
+ifdef CONFIG_LITTLE_ENDIAN
+LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64'
+LDFLAGS += -EL -mshlelf32_linux
+else
+LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4'
+LDFLAGS += -EB -mshelf32_linux
+endif
+
+# No requirements for endianess support from AFLAGS, 'as' always run through gcc
+AFLAGS += -m5 -isa=sh64 -traditional
+CFLAGS += $(cpu-y)
+
+LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_CACHED_MEMORY_OFFSET) \
+ --defsym phys_stext_shmedia=phys_stext+1 \
+ -e phys_stext_shmedia
+
+OBJCOPYFLAGS := -O binary -R .note -R .comment -R .stab -R .stabstr -S
+
+#
+# arch/sh64/defconfig never had any hope of being
+# frequently updated, so use one that does
+#
+KBUILD_DEFCONFIG := cayman_defconfig
+
+ifdef LOADADDR
+LINKFLAGS += -Ttext $(word 1,$(LOADADDR))
+endif
+
+machine-$(CONFIG_SH_CAYMAN) := cayman
+machine-$(CONFIG_SH_SIMULATOR) := sim
+machine-$(CONFIG_SH_HARP) := harp
+machine-$(CONFIG_SH_ROMRAM) := romram
+
+head-y := arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o
+
+core-y += arch/sh64/kernel/ arch/sh64/mm/
+
+ifneq ($(machine-y),)
+core-y += arch/sh64/mach-$(machine-y)/
+endif
+
+LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+libs-y += arch/$(ARCH)/lib/ $(LIBGCC)
+
+drivers-$(CONFIG_OPROFILE) += arch/sh64/oprofile/
+
+boot := arch/$(ARCH)/boot
+
+zImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+compressed: zImage
+
+archclean:
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+prepare: include/asm-$(ARCH)/asm-offsets.h arch/$(ARCH)/lib/syscalltab.h
+
+include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
+ include/asm include/linux/version.h
+ $(call filechk,gen-asm-offsets)
+
+define filechk_gen-syscalltab
+ (set -e; \
+ echo "/*"; \
+ echo " * DO NOT MODIFY."; \
+ echo " *"; \
+ echo " * This file was generated by arch/$(ARCH)/Makefile"; \
+ echo " * Any changes will be reverted at build time."; \
+ echo " */"; \
+ echo ""; \
+ echo "#ifndef __SYSCALLTAB_H"; \
+ echo "#define __SYSCALLTAB_H"; \
+ echo ""; \
+ echo "#include <linux/kernel.h>"; \
+ echo ""; \
+ echo "struct syscall_info {"; \
+ echo " const char *name;"; \
+ echo "} syscall_info_table[] = {"; \
+ sed -e '/^.*\.long /!d;s// { "/;s/\(\([^/]*\)\/\)\{1\}.*/\2/; \
+ s/[ \t]*$$//g;s/$$/" },/;s/\("\)sys_/\1/g'; \
+ echo "};"; \
+ echo ""; \
+ echo "#define NUM_SYSCALL_INFO_ENTRIES ARRAY_SIZE(syscall_info_table)"; \
+ echo ""; \
+ echo "#endif /* __SYSCALLTAB_H */" )
+endef
+
+arch/$(ARCH)/lib/syscalltab.h: arch/sh64/kernel/syscalls.S
+ $(call filechk,gen-syscalltab)
+
+CLEAN_FILES += include/asm-$(ARCH)/asm-offsets.h arch/$(ARCH)/lib/syscalltab.h
+
+define archhelp
+ @echo ' zImage - Compressed kernel image (arch/sh64/boot/zImage)'
+endef
+
diff --git a/arch/sh64/boot/Makefile b/arch/sh64/boot/Makefile
new file mode 100644
index 000000000000..fb71087b7b8a
--- /dev/null
+++ b/arch/sh64/boot/Makefile
@@ -0,0 +1,20 @@
+#
+# arch/sh64/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2002 Stuart Menefy
+#
+
+targets := zImage
+subdir- := compressed
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo 'Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
diff --git a/arch/sh64/boot/compressed/Makefile b/arch/sh64/boot/compressed/Makefile
new file mode 100644
index 000000000000..9cd216718856
--- /dev/null
+++ b/arch/sh64/boot/compressed/Makefile
@@ -0,0 +1,46 @@
+#
+# linux/arch/sh64/boot/compressed/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2002 Stuart Menefy
+# Copyright (C) 2004 Paul Mundt
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz \
+ head.o misc.o cache.o piggy.o vmlinux.lds
+
+EXTRA_AFLAGS := -traditional
+
+OBJECTS := $(obj)/head.o $(obj)/misc.o $(obj)/cache.o
+
+#
+# ZIMAGE_OFFSET is the load offset of the compression loader
+# (4M for the kernel plus 64K for this loader)
+#
+ZIMAGE_OFFSET = $(shell printf "0x%8x" $$[$(CONFIG_MEMORY_START)+0x400000+0x10000])
+
+LDFLAGS_vmlinux := -Ttext $(ZIMAGE_OFFSET) -e startup \
+ -T $(obj)/../../kernel/vmlinux.lds \
+ --no-warn-mismatch
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T
+OBJCOPYFLAGS += -R .empty_zero_page
+
+$(obj)/piggy.o: $(obj)/vmlinux.lds $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
+
diff --git a/arch/sh64/boot/compressed/cache.c b/arch/sh64/boot/compressed/cache.c
new file mode 100644
index 000000000000..708707355ffa
--- /dev/null
+++ b/arch/sh64/boot/compressed/cache.c
@@ -0,0 +1,39 @@
+/*
+ * arch/shmedia/boot/compressed/cache.c -- simple cache management functions
+ *
+ * Code extracted from sh-ipl+g, sh-stub.c, which has the copyright:
+ *
+ * This is originally based on an m68k software stub written by Glenn
+ * Engel at HP, but has changed quite a bit.
+ *
+ * Modifications for the SH by Ben Lee and Steve Chamberlain
+ *
+****************************************************************************
+
+ THIS SOFTWARE IS NOT COPYRIGHTED
+
+ HP offers the following for use in the public domain. HP makes no
+ warranty with regard to the software or it's performance and the
+ user accepts the software "AS IS" with all faults.
+
+ HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+ TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+#define CACHE_ENABLE 0
+#define CACHE_DISABLE 1
+
+int cache_control(unsigned int command)
+{
+ volatile unsigned int *p = (volatile unsigned int *) 0x80000000;
+ int i;
+
+ for (i = 0; i < (32 * 1024); i += 32) {
+ (void *) *p;
+ p += (32 / sizeof (int));
+ }
+
+ return 0;
+}
diff --git a/arch/sh64/boot/compressed/head.S b/arch/sh64/boot/compressed/head.S
new file mode 100644
index 000000000000..82040b1a29cf
--- /dev/null
+++ b/arch/sh64/boot/compressed/head.S
@@ -0,0 +1,164 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/shmedia/boot/compressed/head.S
+ *
+ * Copied from
+ * arch/shmedia/kernel/head.S
+ * which carried the copyright:
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ * Modification for compressed loader:
+ * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
+ */
+
+#include <linux/linkage.h>
+#include <asm/registers.h>
+#include <asm/cache.h>
+#include <asm/mmu_context.h>
+
+/*
+ * Fixed TLB entries to identity map the beginning of RAM
+ */
+#define MMUIR_TEXT_H 0x0000000000000003 | CONFIG_MEMORY_START
+ /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
+#define MMUIR_TEXT_L 0x000000000000009a | CONFIG_MEMORY_START
+ /* 512 Mb, Cacheable (Write-back), execute, Not User, Ph. Add. */
+
+#define MMUDR_CACHED_H 0x0000000000000003 | CONFIG_MEMORY_START
+ /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
+#define MMUDR_CACHED_L 0x000000000000015a | CONFIG_MEMORY_START
+ /* 512 Mb, Cacheable (Write-back), read/write, Not User, Ph. Add. */
+
+#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */
+#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */
+
+#if 1
+#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* OCE + OCI + WB */
+#else
+#define OCCR0_INIT_VAL OCCR0_OFF
+#endif
+#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */
+
+ .text
+
+ .global startup
+startup:
+ /*
+ * Prevent speculative fetch on device memory due to
+ * uninitialized target registers.
+ * This must be executed before the first branch.
+ */
+ ptabs/u ZERO, tr0
+ ptabs/u ZERO, tr1
+ ptabs/u ZERO, tr2
+ ptabs/u ZERO, tr3
+ ptabs/u ZERO, tr4
+ ptabs/u ZERO, tr5
+ ptabs/u ZERO, tr6
+ ptabs/u ZERO, tr7
+ synci
+
+ /*
+ * Set initial TLB entries for cached and uncached regions.
+ * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
+ */
+ /* Clear ITLBs */
+ pta 1f, tr1
+ movi ITLB_FIXED, r21
+ movi ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
+1: putcfg r21, 0, ZERO /* Clear MMUIR[n].PTEH.V */
+ addi r21, TLB_STEP, r21
+ bne r21, r22, tr1
+
+ /* Clear DTLBs */
+ pta 1f, tr1
+ movi DTLB_FIXED, r21
+ movi DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
+1: putcfg r21, 0, ZERO /* Clear MMUDR[n].PTEH.V */
+ addi r21, TLB_STEP, r21
+ bne r21, r22, tr1
+
+ /* Map one big (512Mb) page for ITLB */
+ movi ITLB_FIXED, r21
+ movi MMUIR_TEXT_L, r22 /* PTEL first */
+ putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */
+ movi MMUIR_TEXT_H, r22 /* PTEH last */
+ putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */
+
+ /* Map one big CACHED (512Mb) page for DTLB */
+ movi DTLB_FIXED, r21
+ movi MMUDR_CACHED_L, r22 /* PTEL first */
+ putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */
+ movi MMUDR_CACHED_H, r22 /* PTEH last */
+ putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */
+
+ /* ICache */
+ movi ICCR_BASE, r21
+ movi ICCR0_INIT_VAL, r22
+ movi ICCR1_INIT_VAL, r23
+ putcfg r21, ICCR_REG0, r22
+ putcfg r21, ICCR_REG1, r23
+ synci
+
+ /* OCache */
+ movi OCCR_BASE, r21
+ movi OCCR0_INIT_VAL, r22
+ movi OCCR1_INIT_VAL, r23
+ putcfg r21, OCCR_REG0, r22
+ putcfg r21, OCCR_REG1, r23
+ synco
+
+ /*
+ * Enable the MMU.
+ * From here-on code can be non-PIC.
+ */
+ movi SR_HARMLESS | SR_ENABLE_MMU, r22
+ putcon r22, SSR
+ movi 1f, r22
+ putcon r22, SPC
+ synco
+ rte /* And now go into the hyperspace ... */
+1: /* ... that's the next instruction ! */
+
+ /* Set initial stack pointer */
+ movi datalabel stack_start, r0
+ ld.l r0, 0, r15
+
+ /*
+ * Clear bss
+ */
+ pt 1f, tr1
+ movi datalabel __bss_start, r22
+ movi datalabel _end, r23
+1: st.l r22, 0, ZERO
+ addi r22, 4, r22
+ bne r22, r23, tr1
+
+ /*
+ * Decompress the kernel.
+ */
+ pt decompress_kernel, tr0
+ blink tr0, r18
+
+ /*
+ * Disable the MMU.
+ */
+ movi SR_HARMLESS, r22
+ putcon r22, SSR
+ movi 1f, r22
+ putcon r22, SPC
+ synco
+ rte /* And now go into the hyperspace ... */
+1: /* ... that's the next instruction ! */
+
+ /* Jump into the decompressed kernel */
+ movi datalabel (CONFIG_MEMORY_START + 0x2000)+1, r19
+ ptabs r19, tr0
+ blink tr0, r18
+
+ /* Shouldn't return here, but just in case, loop forever */
+ pt 1f, tr0
+1: blink tr0, ZERO
diff --git a/arch/sh64/boot/compressed/install.sh b/arch/sh64/boot/compressed/install.sh
new file mode 100644
index 000000000000..90589f0fec12
--- /dev/null
+++ b/arch/sh64/boot/compressed/install.sh
@@ -0,0 +1,56 @@
+#!/bin/sh
+#
+# arch/sh/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+# Adapted from code in arch/arm/boot/install.sh by Stuart Menefy
+#
+# "make install" script for sh architecture
+#
+# Arguments:
+# $1 - kernel version
+# $2 - kernel image file
+# $3 - kernel map file
+# $4 - default install path (blank if root directory)
+#
+
+# User may have a custom install script
+
+if [ -x /sbin/installkernel ]; then
+ exec /sbin/installkernel "$@"
+fi
+
+if [ "$2" = "zImage" ]; then
+# Compressed install
+ echo "Installing compressed kernel"
+ if [ -f $4/vmlinuz-$1 ]; then
+ mv $4/vmlinuz-$1 $4/vmlinuz.old
+ fi
+
+ if [ -f $4/System.map-$1 ]; then
+ mv $4/System.map-$1 $4/System.old
+ fi
+
+ cat $2 > $4/vmlinuz-$1
+ cp $3 $4/System.map-$1
+else
+# Normal install
+ echo "Installing normal kernel"
+ if [ -f $4/vmlinux-$1 ]; then
+ mv $4/vmlinux-$1 $4/vmlinux.old
+ fi
+
+ if [ -f $4/System.map ]; then
+ mv $4/System.map $4/System.old
+ fi
+
+ cat $2 > $4/vmlinux-$1
+ cp $3 $4/System.map
+fi
diff --git a/arch/sh64/boot/compressed/misc.c b/arch/sh64/boot/compressed/misc.c
new file mode 100644
index 000000000000..89dbf45df3c8
--- /dev/null
+++ b/arch/sh64/boot/compressed/misc.c
@@ -0,0 +1,251 @@
+/*
+ * arch/shmedia/boot/compressed/misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Adapted for SHmedia from sh by Stuart Menefy, May 2002
+ */
+
+#include <linux/config.h>
+#include <asm/uaccess.h>
+
+/* cache.c */
+#define CACHE_ENABLE 0
+#define CACHE_DISABLE 1
+int cache_control(unsigned int command);
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n) memset ((s), 0, (n))
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, */
+ /* and a power of two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* Sliding window buffer */
+
+static unsigned insize = 0; /* valid bytes in inbuf */
+static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
+static unsigned outcnt = 0; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Trace(x) fprintf x
+# define Tracev(x) {if (verbose) fprintf x ;}
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+extern char input_data[];
+extern int input_len;
+
+static long bytes_out = 0;
+static uch *output_data;
+static unsigned long output_ptr = 0;
+
+static void *malloc(int size);
+static void free(void *where);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+static void puts(const char *);
+
+extern int _text; /* Defined in vmlinux.lds.S */
+extern int _end;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+#define HEAP_SIZE 0x10000
+
+#include "../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size < 0)
+ error("Malloc error\n");
+ if (free_mem_ptr == 0)
+ error("Memory error\n");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *) free_mem_ptr;
+ free_mem_ptr += size;
+
+ if (free_mem_ptr >= free_mem_end_ptr)
+ error("\nOut of memory\n");
+
+ return p;
+}
+
+static void free(void *where)
+{ /* Don't care */
+}
+
+static void gzip_mark(void **ptr)
+{
+ *ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+ free_mem_ptr = (long) *ptr;
+}
+
+void puts(const char *s)
+{
+}
+
+void *memset(void *s, int c, size_t n)
+{
+ int i;
+ char *ss = (char *) s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return s;
+}
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+ int i;
+ char *d = (char *) __dest, *s = (char *) __src;
+
+ for (i = 0; i < __n; i++)
+ d[i] = s[i];
+ return __dest;
+}
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+static int fill_inbuf(void)
+{
+ if (insize != 0) {
+ error("ran out of input data\n");
+ }
+
+ inbuf = input_data;
+ insize = input_len;
+ inptr = 1;
+ return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void flush_window(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out++ = *in++;
+ c = crc_32_tab[((int) c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg) outcnt;
+ output_ptr += (ulg) outcnt;
+ outcnt = 0;
+ puts(".");
+}
+
+static void error(char *x)
+{
+ puts("\n\n");
+ puts(x);
+ puts("\n\n -- System halted");
+
+ while (1) ; /* Halt */
+}
+
+#define STACK_SIZE (4096)
+long __attribute__ ((aligned(8))) user_stack[STACK_SIZE];
+long *stack_start = &user_stack[STACK_SIZE];
+
+void decompress_kernel(void)
+{
+ output_data = (uch *) (CONFIG_MEMORY_START + 0x2000);
+ free_mem_ptr = (unsigned long) &_end;
+ free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
+ makecrc();
+ puts("Uncompressing Linux... ");
+ cache_control(CACHE_ENABLE);
+ gunzip();
+ puts("\n");
+
+#if 0
+ /* When booting from ROM may want to do something like this if the
+ * boot loader doesn't.
+ */
+
+ /* Set up the parameters and command line */
+ {
+ volatile unsigned int *parambase =
+ (int *) (CONFIG_MEMORY_START + 0x1000);
+
+ parambase[0] = 0x1; /* MOUNT_ROOT_RDONLY */
+ parambase[1] = 0x0; /* RAMDISK_FLAGS */
+ parambase[2] = 0x0200; /* ORIG_ROOT_DEV */
+ parambase[3] = 0x0; /* LOADER_TYPE */
+ parambase[4] = 0x0; /* INITRD_START */
+ parambase[5] = 0x0; /* INITRD_SIZE */
+ parambase[6] = 0;
+
+ strcpy((char *) ((int) parambase + 0x100),
+ "console=ttySC0,38400");
+ }
+#endif
+
+ puts("Ok, booting the kernel.\n");
+
+ cache_control(CACHE_DISABLE);
+}
diff --git a/arch/sh64/boot/compressed/vmlinux.lds.S b/arch/sh64/boot/compressed/vmlinux.lds.S
new file mode 100644
index 000000000000..15a737d9bba8
--- /dev/null
+++ b/arch/sh64/boot/compressed/vmlinux.lds.S
@@ -0,0 +1,65 @@
+/*
+ * ld script to make compressed SuperH/shmedia Linux kernel+decompression
+ * bootstrap
+ * Modified by Stuart Menefy from arch/sh/vmlinux.lds.S written by Niibe Yutaka
+ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_LITTLE_ENDIAN
+/* OUTPUT_FORMAT("elf32-sh64l-linux", "elf32-sh64l-linux", "elf32-sh64l-linux") */
+#define NOP 0x6ff0fff0
+#else
+/* OUTPUT_FORMAT("elf32-sh64", "elf32-sh64", "elf32-sh64") */
+#define NOP 0xf0fff06f
+#endif
+
+OUTPUT_FORMAT("elf32-sh64-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+#define ALIGNED_GAP(section, align) (((ADDR(section)+SIZEOF(section)+(align)-1) & ~((align)-1))-ADDR(section))
+#define FOLLOWING(section, align) AT (LOADADDR(section) + ALIGNED_GAP(section,align))
+
+SECTIONS
+{
+ _text = .; /* Text and read-only data */
+
+ .text : {
+ *(.text)
+ *(.text64)
+ *(.text..SHmedia32)
+ *(.fixup)
+ *(.gnu.warning)
+ } = NOP
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ /* There is no 'real' reason for eight byte alignment, four would work
+ * as well, but gdb downloads much (*4) faster with this.
+ */
+ . = ALIGN(8);
+ .image : { *(.image) }
+ . = ALIGN(4);
+ _etext = .; /* End of text section */
+
+ .data : /* Data */
+ FOLLOWING(.image, 4)
+ {
+ _data = .;
+ *(.data)
+ }
+ _data_image = LOADADDR(.data);/* Address of data section in ROM */
+
+ _edata = .; /* End of data section */
+
+ .stack : { stack = .; _stack = .; }
+
+ . = ALIGN(4);
+ __bss_start = .; /* BSS */
+ .bss : {
+ *(.bss)
+ }
+ . = ALIGN(4);
+ _end = . ;
+}
diff --git a/arch/sh64/configs/cayman_defconfig b/arch/sh64/configs/cayman_defconfig
new file mode 100644
index 000000000000..48f27407d5e4
--- /dev/null
+++ b/arch/sh64/configs/cayman_defconfig
@@ -0,0 +1,837 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11
+# Fri Feb 25 18:14:31 2005
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH64=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOG_BUF_SHIFT=14
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# System type
+#
+# CONFIG_SH_GENERIC is not set
+# CONFIG_SH_SIMULATOR is not set
+CONFIG_SH_CAYMAN=y
+# CONFIG_SH_ROMRAM is not set
+# CONFIG_SH_HARP is not set
+CONFIG_CPU_SH5=y
+CONFIG_CPU_SUBTYPE_SH5_101=y
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+CONFIG_LITTLE_ENDIAN=y
+# CONFIG_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH64_FPU_DENORM_FLUSH is not set
+CONFIG_SH64_PGTABLE_2_LEVEL=y
+# CONFIG_SH64_PGTABLE_3_LEVEL is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
+CONFIG_SH64_USER_MISALIGNED_FIXUP=y
+
+#
+# Memory options
+#
+CONFIG_CACHED_MEMORY_OFFSET=0x20000000
+CONFIG_MEMORY_START=0x80000000
+CONFIG_MEMORY_SIZE_IN_MB=128
+
+#
+# Cache options
+#
+# CONFIG_DCACHE_DISABLED is not set
+CONFIG_DCACHE_WRITE_BACK=y
+# CONFIG_DCACHE_WRITE_THROUGH is not set
+# CONFIG_ICACHE_DISABLED is not set
+CONFIG_PCIDEVICE_MEMORY_START=C0000000
+CONFIG_DEVICE_MEMORY_START=E0000000
+CONFIG_FLASH_MEMORY_START=0x00000000
+CONFIG_PCI_BLOCK_START=0x40000000
+
+#
+# CPU Subtype specific options
+#
+CONFIG_SH64_ID2815_WORKAROUND=y
+
+#
+# Misc options
+#
+CONFIG_HEARTBEAT=y
+CONFIG_HDSP253_LED=y
+CONFIG_SH_DMA=y
+CONFIG_PREEMPT=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+CONFIG_SUPERHYWAY=y
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SH_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+CONFIG_FB_KYRO=y
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_FS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
+CONFIG_SH64_PROC_TLB=y
+CONFIG_SH64_PROC_ASIDS=y
+CONFIG_SH64_SR_WATCH=y
+# CONFIG_POOR_MANS_STRACE is not set
+# CONFIG_SH_ALPHANUMERIC is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/sh64/kernel/Makefile b/arch/sh64/kernel/Makefile
new file mode 100644
index 000000000000..5816657c079c
--- /dev/null
+++ b/arch/sh64/kernel/Makefile
@@ -0,0 +1,36 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2000, 2001 Paolo Alberelli
+# Copyright (C) 2003 Paul Mundt
+#
+# Makefile for the Linux sh64 kernel.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+extra-y := head.o init_task.o vmlinux.lds
+
+obj-y := process.o signal.o entry.o traps.o irq.o irq_intc.o \
+ ptrace.o setup.o time.o sys_sh64.o semaphore.o sh_ksyms.o \
+ switchto.o syscalls.o
+
+obj-$(CONFIG_HEARTBEAT) += led.o
+obj-$(CONFIG_SH_ALPHANUMERIC) += alphanum.o
+obj-$(CONFIG_SH_DMA) += dma.o
+obj-$(CONFIG_SH_FPU) += fpu.o
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_KALLSYMS) += unwind.o
+obj-$(CONFIG_PCI) += pci-dma.o pcibios.o
+obj-$(CONFIG_MODULES) += module.o
+
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_CPU_SH5) += pci_sh5.o
+endif
+
+USE_STANDARD_AS_RULE := true
+
diff --git a/arch/sh64/kernel/alphanum.c b/arch/sh64/kernel/alphanum.c
new file mode 100644
index 000000000000..56d6f9f71524
--- /dev/null
+++ b/arch/sh64/kernel/alphanum.c
@@ -0,0 +1,45 @@
+/*
+ * arch/sh64/kernel/alpanum.c
+ *
+ * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Machine-independent functions for handling 8-digit alphanumeric display
+ * (e.g. Agilent HDSP-253x)
+ */
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+
+void mach_alphanum(int pos, unsigned char val);
+void mach_led(int pos, int val);
+
+void print_seg(char *file, int line)
+{
+ int i;
+ unsigned int nibble;
+
+ for (i = 0; i < 5; i++) {
+ mach_alphanum(i, file[i]);
+ }
+
+ for (i = 0; i < 3; i++) {
+ nibble = ((line >> (i * 4)) & 0xf);
+ mach_alphanum(7 - i, nibble + ((nibble > 9) ? 55 : 48));
+ }
+}
+
+void print_seg_num(unsigned num)
+{
+ int i;
+ unsigned int nibble;
+
+ for (i = 0; i < 8; i++) {
+ nibble = ((num >> (i * 4)) & 0xf);
+
+ mach_alphanum(7 - i, nibble + ((nibble > 9) ? 55 : 48));
+ }
+}
+
diff --git a/arch/sh64/kernel/asm-offsets.c b/arch/sh64/kernel/asm-offsets.c
new file mode 100644
index 000000000000..ca76537c16c0
--- /dev/null
+++ b/arch/sh64/kernel/asm-offsets.c
@@ -0,0 +1,33 @@
+/*
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <asm/thread_info.h>
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+int main(void)
+{
+ /* offsets into the thread_info struct */
+ DEFINE(TI_TASK, offsetof(struct thread_info, task));
+ DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
+ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
+ DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+ DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
+ DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block));
+
+ return 0;
+}
diff --git a/arch/sh64/kernel/dma.c b/arch/sh64/kernel/dma.c
new file mode 100644
index 000000000000..09cd9f4670b5
--- /dev/null
+++ b/arch/sh64/kernel/dma.c
@@ -0,0 +1,297 @@
+/*
+ * arch/sh64/kernel/dma.c
+ *
+ * DMA routines for the SH-5 DMAC.
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <asm/hardware.h>
+#include <asm/dma.h>
+#include <asm/signal.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+typedef struct {
+ unsigned long dev_addr;
+ unsigned long mem_addr;
+
+ unsigned int mode;
+ unsigned int count;
+} dma_info_t;
+
+static dma_info_t dma_info[MAX_DMA_CHANNELS];
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+/* arch/sh64/kernel/irq_intc.c */
+extern void make_intc_irq(unsigned int irq);
+
+/* DMAC Interrupts */
+#define DMA_IRQ_DMTE0 18
+#define DMA_IRQ_DERR 22
+
+#define DMAC_COMMON_BASE (dmac_base + 0x08)
+#define DMAC_SAR_BASE (dmac_base + 0x10)
+#define DMAC_DAR_BASE (dmac_base + 0x18)
+#define DMAC_COUNT_BASE (dmac_base + 0x20)
+#define DMAC_CTRL_BASE (dmac_base + 0x28)
+#define DMAC_STATUS_BASE (dmac_base + 0x30)
+
+#define DMAC_SAR(n) (DMAC_SAR_BASE + ((n) * 0x28))
+#define DMAC_DAR(n) (DMAC_DAR_BASE + ((n) * 0x28))
+#define DMAC_COUNT(n) (DMAC_COUNT_BASE + ((n) * 0x28))
+#define DMAC_CTRL(n) (DMAC_CTRL_BASE + ((n) * 0x28))
+#define DMAC_STATUS(n) (DMAC_STATUS_BASE + ((n) * 0x28))
+
+/* DMAC.COMMON Bit Definitions */
+#define DMAC_COMMON_PR 0x00000001 /* Priority */
+ /* Bits 1-2 Reserved */
+#define DMAC_COMMON_ME 0x00000008 /* Master Enable */
+#define DMAC_COMMON_NMI 0x00000010 /* NMI Flag */
+ /* Bits 5-6 Reserved */
+#define DMAC_COMMON_ER 0x00000780 /* Error Response */
+#define DMAC_COMMON_AAE 0x00007800 /* Address Alignment Error */
+ /* Bits 15-63 Reserved */
+
+/* DMAC.SAR Bit Definitions */
+#define DMAC_SAR_ADDR 0xffffffff /* Source Address */
+
+/* DMAC.DAR Bit Definitions */
+#define DMAC_DAR_ADDR 0xffffffff /* Destination Address */
+
+/* DMAC.COUNT Bit Definitions */
+#define DMAC_COUNT_CNT 0xffffffff /* Transfer Count */
+
+/* DMAC.CTRL Bit Definitions */
+#define DMAC_CTRL_TS 0x00000007 /* Transfer Size */
+#define DMAC_CTRL_SI 0x00000018 /* Source Increment */
+#define DMAC_CTRL_DI 0x00000060 /* Destination Increment */
+#define DMAC_CTRL_RS 0x00000780 /* Resource Select */
+#define DMAC_CTRL_IE 0x00000800 /* Interrupt Enable */
+#define DMAC_CTRL_TE 0x00001000 /* Transfer Enable */
+ /* Bits 15-63 Reserved */
+
+/* DMAC.STATUS Bit Definitions */
+#define DMAC_STATUS_TE 0x00000001 /* Transfer End */
+#define DMAC_STATUS_AAE 0x00000002 /* Address Alignment Error */
+ /* Bits 2-63 Reserved */
+
+static unsigned long dmac_base;
+
+void set_dma_count(unsigned int chan, unsigned int count);
+void set_dma_addr(unsigned int chan, unsigned int addr);
+
+static irqreturn_t dma_mte(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned int chan = irq - DMA_IRQ_DMTE0;
+ dma_info_t *info = dma_info + chan;
+ u64 status;
+
+ if (info->mode & DMA_MODE_WRITE) {
+ sh64_out64(info->mem_addr & DMAC_SAR_ADDR, DMAC_SAR(chan));
+ } else {
+ sh64_out64(info->mem_addr & DMAC_DAR_ADDR, DMAC_DAR(chan));
+ }
+
+ set_dma_count(chan, info->count);
+
+ /* Clear the TE bit */
+ status = sh64_in64(DMAC_STATUS(chan));
+ status &= ~DMAC_STATUS_TE;
+ sh64_out64(status, DMAC_STATUS(chan));
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq_dmte = {
+ .handler = dma_mte,
+ .flags = SA_INTERRUPT,
+ .name = "DMA MTE",
+};
+
+static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs)
+{
+ u64 tmp;
+ u8 chan;
+
+ printk(KERN_NOTICE "DMAC: Got a DMA Error!\n");
+
+ tmp = sh64_in64(DMAC_COMMON_BASE);
+
+ /* Check for the type of error */
+ if ((chan = tmp & DMAC_COMMON_AAE)) {
+ /* It's an address alignment error.. */
+ printk(KERN_NOTICE "DMAC: Alignment error on channel %d, ", chan);
+
+ printk(KERN_NOTICE "SAR: 0x%08llx, DAR: 0x%08llx, COUNT: %lld\n",
+ (sh64_in64(DMAC_SAR(chan)) & DMAC_SAR_ADDR),
+ (sh64_in64(DMAC_DAR(chan)) & DMAC_DAR_ADDR),
+ (sh64_in64(DMAC_COUNT(chan)) & DMAC_COUNT_CNT));
+
+ } else if ((chan = tmp & DMAC_COMMON_ER)) {
+ /* Something else went wrong.. */
+ printk(KERN_NOTICE "DMAC: Error on channel %d\n", chan);
+ }
+
+ /* Reset the ME bit to clear the interrupt */
+ tmp |= DMAC_COMMON_ME;
+ sh64_out64(tmp, DMAC_COMMON_BASE);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq_derr = {
+ .handler = dma_err,
+ .flags = SA_INTERRUPT,
+ .name = "DMA Error",
+};
+
+static inline unsigned long calc_xmit_shift(unsigned int chan)
+{
+ return sh64_in64(DMAC_CTRL(chan)) & 0x03;
+}
+
+void setup_dma(unsigned int chan, dma_info_t *info)
+{
+ unsigned int irq = DMA_IRQ_DMTE0 + chan;
+ dma_info_t *dma = dma_info + chan;
+
+ make_intc_irq(irq);
+ setup_irq(irq, &irq_dmte);
+ dma = info;
+}
+
+void enable_dma(unsigned int chan)
+{
+ u64 ctrl;
+
+ ctrl = sh64_in64(DMAC_CTRL(chan));
+ ctrl |= DMAC_CTRL_TE;
+ sh64_out64(ctrl, DMAC_CTRL(chan));
+}
+
+void disable_dma(unsigned int chan)
+{
+ u64 ctrl;
+
+ ctrl = sh64_in64(DMAC_CTRL(chan));
+ ctrl &= ~DMAC_CTRL_TE;
+ sh64_out64(ctrl, DMAC_CTRL(chan));
+}
+
+void set_dma_mode(unsigned int chan, char mode)
+{
+ dma_info_t *info = dma_info + chan;
+
+ info->mode = mode;
+
+ set_dma_addr(chan, info->mem_addr);
+ set_dma_count(chan, info->count);
+}
+
+void set_dma_addr(unsigned int chan, unsigned int addr)
+{
+ dma_info_t *info = dma_info + chan;
+ unsigned long sar, dar;
+
+ info->mem_addr = addr;
+ sar = (info->mode & DMA_MODE_WRITE) ? info->mem_addr : info->dev_addr;
+ dar = (info->mode & DMA_MODE_WRITE) ? info->dev_addr : info->mem_addr;
+
+ sh64_out64(sar & DMAC_SAR_ADDR, DMAC_SAR(chan));
+ sh64_out64(dar & DMAC_SAR_ADDR, DMAC_DAR(chan));
+}
+
+void set_dma_count(unsigned int chan, unsigned int count)
+{
+ dma_info_t *info = dma_info + chan;
+ u64 tmp;
+
+ info->count = count;
+
+ tmp = (info->count >> calc_xmit_shift(chan)) & DMAC_COUNT_CNT;
+
+ sh64_out64(tmp, DMAC_COUNT(chan));
+}
+
+unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dma_spin_lock, flags);
+
+ return flags;
+}
+
+void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+int get_dma_residue(unsigned int chan)
+{
+ return sh64_in64(DMAC_COUNT(chan) << calc_xmit_shift(chan));
+}
+
+int __init init_dma(void)
+{
+ struct vcr_info vcr;
+ u64 tmp;
+
+ /* Remap the DMAC */
+ dmac_base = onchip_remap(PHYS_DMAC_BLOCK, 1024, "DMAC");
+ if (!dmac_base) {
+ printk(KERN_ERR "Unable to remap DMAC\n");
+ return -ENOMEM;
+ }
+
+ /* Report DMAC.VCR Info */
+ vcr = sh64_get_vcr_info(dmac_base);
+ printk("DMAC: Module ID: 0x%04x, Module version: 0x%04x\n",
+ vcr.mod_id, vcr.mod_vers);
+
+ /* Set the ME bit */
+ tmp = sh64_in64(DMAC_COMMON_BASE);
+ tmp |= DMAC_COMMON_ME;
+ sh64_out64(tmp, DMAC_COMMON_BASE);
+
+ /* Enable the DMAC Error Interrupt */
+ make_intc_irq(DMA_IRQ_DERR);
+ setup_irq(DMA_IRQ_DERR, &irq_derr);
+
+ return 0;
+}
+
+static void __exit exit_dma(void)
+{
+ onchip_unmap(dmac_base);
+ free_irq(DMA_IRQ_DERR, 0);
+}
+
+module_init(init_dma);
+module_exit(exit_dma);
+
+MODULE_AUTHOR("Paul Mundt");
+MODULE_DESCRIPTION("DMA API for SH-5 DMAC");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(setup_dma);
+EXPORT_SYMBOL(claim_dma_lock);
+EXPORT_SYMBOL(release_dma_lock);
+EXPORT_SYMBOL(enable_dma);
+EXPORT_SYMBOL(disable_dma);
+EXPORT_SYMBOL(set_dma_mode);
+EXPORT_SYMBOL(set_dma_addr);
+EXPORT_SYMBOL(set_dma_count);
+EXPORT_SYMBOL(get_dma_residue);
+
diff --git a/arch/sh64/kernel/early_printk.c b/arch/sh64/kernel/early_printk.c
new file mode 100644
index 000000000000..8c8a76e180aa
--- /dev/null
+++ b/arch/sh64/kernel/early_printk.c
@@ -0,0 +1,105 @@
+/*
+ * arch/sh64/kernel/early_printk.c
+ *
+ * SH-5 Early SCIF console (cloned and hacked from sh implementation)
+ *
+ * Copyright (C) 2003, 2004 Paul Mundt <lethal@linux-sh.org>
+ * Copyright (C) 2002 M. R. Brown <mrbrown@0xd6.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+
+#define SCIF_BASE_ADDR 0x01030000
+#define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
+
+/*
+ * Fixed virtual address where SCIF is mapped (should already be done
+ * in arch/sh64/kernel/head.S!).
+ */
+#define SCIF_REG 0xfa030000
+
+enum {
+ SCIF_SCSMR2 = SCIF_REG + 0x00,
+ SCIF_SCBRR2 = SCIF_REG + 0x04,
+ SCIF_SCSCR2 = SCIF_REG + 0x08,
+ SCIF_SCFTDR2 = SCIF_REG + 0x0c,
+ SCIF_SCFSR2 = SCIF_REG + 0x10,
+ SCIF_SCFRDR2 = SCIF_REG + 0x14,
+ SCIF_SCFCR2 = SCIF_REG + 0x18,
+ SCIF_SCFDR2 = SCIF_REG + 0x1c,
+ SCIF_SCSPTR2 = SCIF_REG + 0x20,
+ SCIF_SCLSR2 = SCIF_REG + 0x24,
+};
+
+static void sh_console_putc(int c)
+{
+ while (!(ctrl_inw(SCIF_SCFSR2) & 0x20))
+ cpu_relax();
+
+ ctrl_outb(c, SCIF_SCFTDR2);
+ ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0x9f), SCIF_SCFSR2);
+
+ if (c == '\n')
+ sh_console_putc('\r');
+}
+
+static void sh_console_flush(void)
+{
+ ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0xbf), SCIF_SCFSR2);
+
+ while (!(ctrl_inw(SCIF_SCFSR2) & 0x40))
+ cpu_relax();
+
+ ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0xbf), SCIF_SCFSR2);
+}
+
+static void sh_console_write(struct console *con, const char *s, unsigned count)
+{
+ while (count-- > 0)
+ sh_console_putc(*s++);
+
+ sh_console_flush();
+}
+
+static int __init sh_console_setup(struct console *con, char *options)
+{
+ con->cflag = CREAD | HUPCL | CLOCAL | B19200 | CS8;
+
+ return 0;
+}
+
+static struct console sh_console = {
+ .name = "scifcon",
+ .write = sh_console_write,
+ .setup = sh_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+void __init enable_early_printk(void)
+{
+ ctrl_outb(0x2a, SCIF_SCBRR2); /* 19200bps */
+
+ ctrl_outw(0x04, SCIF_SCFCR2); /* Reset TFRST */
+ ctrl_outw(0x10, SCIF_SCFCR2); /* TTRG0=1 */
+
+ ctrl_outw(0, SCIF_SCSPTR2);
+ ctrl_outw(0x60, SCIF_SCFSR2);
+ ctrl_outw(0, SCIF_SCLSR2);
+ ctrl_outw(0x30, SCIF_SCSCR2);
+
+ register_console(&sh_console);
+}
+
+void disable_early_printk(void)
+{
+ unregister_console(&sh_console);
+}
+
diff --git a/arch/sh64/kernel/entry.S b/arch/sh64/kernel/entry.S
new file mode 100644
index 000000000000..2e2cfe20b426
--- /dev/null
+++ b/arch/sh64/kernel/entry.S
@@ -0,0 +1,2103 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/entry.S
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2004, 2005 Paul Mundt
+ * Copyright (C) 2003, 2004 Richard Curnow
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sys.h>
+
+#include <asm/processor.h>
+#include <asm/registers.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * SR fields.
+ */
+#define SR_ASID_MASK 0x00ff0000
+#define SR_FD_MASK 0x00008000
+#define SR_SS 0x08000000
+#define SR_BL 0x10000000
+#define SR_MD 0x40000000
+
+/*
+ * Event code.
+ */
+#define EVENT_INTERRUPT 0
+#define EVENT_FAULT_TLB 1
+#define EVENT_FAULT_NOT_TLB 2
+#define EVENT_DEBUG 3
+
+/* EXPEVT values */
+#define RESET_CAUSE 0x20
+#define DEBUGSS_CAUSE 0x980
+
+/*
+ * Frame layout. Quad index.
+ */
+#define FRAME_T(x) FRAME_TBASE+(x*8)
+#define FRAME_R(x) FRAME_RBASE+(x*8)
+#define FRAME_S(x) FRAME_SBASE+(x*8)
+#define FSPC 0
+#define FSSR 1
+#define FSYSCALL_ID 2
+
+/* Arrange the save frame to be a multiple of 32 bytes long */
+#define FRAME_SBASE 0
+#define FRAME_RBASE (FRAME_SBASE+(3*8)) /* SYSCALL_ID - SSR - SPC */
+#define FRAME_TBASE (FRAME_RBASE+(63*8)) /* r0 - r62 */
+#define FRAME_PBASE (FRAME_TBASE+(8*8)) /* tr0 -tr7 */
+#define FRAME_SIZE (FRAME_PBASE+(2*8)) /* pad0-pad1 */
+
+#define FP_FRAME_SIZE FP_FRAME_BASE+(33*8) /* dr0 - dr31 + fpscr */
+#define FP_FRAME_BASE 0
+
+#define SAVED_R2 0*8
+#define SAVED_R3 1*8
+#define SAVED_R4 2*8
+#define SAVED_R5 3*8
+#define SAVED_R18 4*8
+#define SAVED_R6 5*8
+#define SAVED_TR0 6*8
+
+/* These are the registers saved in the TLB path that aren't saved in the first
+ level of the normal one. */
+#define TLB_SAVED_R25 7*8
+#define TLB_SAVED_TR1 8*8
+#define TLB_SAVED_TR2 9*8
+#define TLB_SAVED_TR3 10*8
+#define TLB_SAVED_TR4 11*8
+/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing
+ breakage otherwise. */
+#define TLB_SAVED_R0 12*8
+#define TLB_SAVED_R1 13*8
+
+#define CLI() \
+ getcon SR, r6; \
+ ori r6, 0xf0, r6; \
+ putcon r6, SR;
+
+#define STI() \
+ getcon SR, r6; \
+ andi r6, ~0xf0, r6; \
+ putcon r6, SR;
+
+#ifdef CONFIG_PREEMPT
+# define preempt_stop() CLI()
+#else
+# define preempt_stop()
+# define resume_kernel restore_all
+#endif
+
+ .section .data, "aw"
+
+#define FAST_TLBMISS_STACK_CACHELINES 4
+#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES)
+
+/* Register back-up area for all exceptions */
+ .balign 32
+ /* Allow for 16 quadwords to be pushed by fast tlbmiss handling
+ * register saves etc. */
+ .fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0
+/* This is 32 byte aligned by construction */
+/* Register back-up area for all exceptions */
+reg_save_area:
+ .quad 0
+ .quad 0
+ .quad 0
+ .quad 0
+
+ .quad 0
+ .quad 0
+ .quad 0
+ .quad 0
+
+ .quad 0
+ .quad 0
+ .quad 0
+ .quad 0
+
+ .quad 0
+ .quad 0
+
+/* Save area for RESVEC exceptions. We cannot use reg_save_area because of
+ * reentrancy. Note this area may be accessed via physical address.
+ * Align so this fits a whole single cache line, for ease of purging.
+ */
+ .balign 32,0,32
+resvec_save_area:
+ .quad 0
+ .quad 0
+ .quad 0
+ .quad 0
+ .quad 0
+ .balign 32,0,32
+
+/* Jump table of 3rd level handlers */
+trap_jtable:
+ .long do_exception_error /* 0x000 */
+ .long do_exception_error /* 0x020 */
+ .long tlb_miss_load /* 0x040 */
+ .long tlb_miss_store /* 0x060 */
+ ! ARTIFICIAL pseudo-EXPEVT setting
+ .long do_debug_interrupt /* 0x080 */
+ .long tlb_miss_load /* 0x0A0 */
+ .long tlb_miss_store /* 0x0C0 */
+ .long do_address_error_load /* 0x0E0 */
+ .long do_address_error_store /* 0x100 */
+#ifdef CONFIG_SH_FPU
+ .long do_fpu_error /* 0x120 */
+#else
+ .long do_exception_error /* 0x120 */
+#endif
+ .long do_exception_error /* 0x140 */
+ .long system_call /* 0x160 */
+ .long do_reserved_inst /* 0x180 */
+ .long do_illegal_slot_inst /* 0x1A0 */
+ .long do_NMI /* 0x1C0 */
+ .long do_exception_error /* 0x1E0 */
+ .rept 15
+ .long do_IRQ /* 0x200 - 0x3C0 */
+ .endr
+ .long do_exception_error /* 0x3E0 */
+ .rept 32
+ .long do_IRQ /* 0x400 - 0x7E0 */
+ .endr
+ .long fpu_error_or_IRQA /* 0x800 */
+ .long fpu_error_or_IRQB /* 0x820 */
+ .long do_IRQ /* 0x840 */
+ .long do_IRQ /* 0x860 */
+ .rept 6
+ .long do_exception_error /* 0x880 - 0x920 */
+ .endr
+ .long do_software_break_point /* 0x940 */
+ .long do_exception_error /* 0x960 */
+ .long do_single_step /* 0x980 */
+
+ .rept 3
+ .long do_exception_error /* 0x9A0 - 0x9E0 */
+ .endr
+ .long do_IRQ /* 0xA00 */
+ .long do_IRQ /* 0xA20 */
+ .long itlb_miss_or_IRQ /* 0xA40 */
+ .long do_IRQ /* 0xA60 */
+ .long do_IRQ /* 0xA80 */
+ .long itlb_miss_or_IRQ /* 0xAA0 */
+ .long do_exception_error /* 0xAC0 */
+ .long do_address_error_exec /* 0xAE0 */
+ .rept 8
+ .long do_exception_error /* 0xB00 - 0xBE0 */
+ .endr
+ .rept 18
+ .long do_IRQ /* 0xC00 - 0xE20 */
+ .endr
+
+ .section .text64, "ax"
+
+/*
+ * --- Exception/Interrupt/Event Handling Section
+ */
+
+/*
+ * VBR and RESVEC blocks.
+ *
+ * First level handler for VBR-based exceptions.
+ *
+ * To avoid waste of space, align to the maximum text block size.
+ * This is assumed to be at most 128 bytes or 32 instructions.
+ * DO NOT EXCEED 32 instructions on the first level handlers !
+ *
+ * Also note that RESVEC is contained within the VBR block
+ * where the room left (1KB - TEXT_SIZE) allows placing
+ * the RESVEC block (at most 512B + TEXT_SIZE).
+ *
+ * So first (and only) level handler for RESVEC-based exceptions.
+ *
+ * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss
+ * and interrupt) we are a lot tight with register space until
+ * saving onto the stack frame, which is done in handle_exception().
+ *
+ */
+
+#define TEXT_SIZE 128
+#define BLOCK_SIZE 1664 /* Dynamic check, 13*128 */
+
+ .balign TEXT_SIZE
+LVBR_block:
+ .space 256, 0 /* Power-on class handler, */
+ /* not required here */
+not_a_tlb_miss:
+ synco /* TAKum03020 (but probably a good idea anyway.) */
+ /* Save original stack pointer into KCR1 */
+ putcon SP, KCR1
+
+ /* Save other original registers into reg_save_area */
+ movi reg_save_area, SP
+ st.q SP, SAVED_R2, r2
+ st.q SP, SAVED_R3, r3
+ st.q SP, SAVED_R4, r4
+ st.q SP, SAVED_R5, r5
+ st.q SP, SAVED_R6, r6
+ st.q SP, SAVED_R18, r18
+ gettr tr0, r3
+ st.q SP, SAVED_TR0, r3
+
+ /* Set args for Non-debug, Not a TLB miss class handler */
+ getcon EXPEVT, r2
+ movi ret_from_exception, r3
+ ori r3, 1, r3
+ movi EVENT_FAULT_NOT_TLB, r4
+ or SP, ZERO, r5
+ getcon KCR1, SP
+ pta handle_exception, tr0
+ blink tr0, ZERO
+
+ .balign 256
+ ! VBR+0x200
+ nop
+ .balign 256
+ ! VBR+0x300
+ nop
+ .balign 256
+ /*
+ * Instead of the natural .balign 1024 place RESVEC here
+ * respecting the final 1KB alignment.
+ */
+ .balign TEXT_SIZE
+ /*
+ * Instead of '.space 1024-TEXT_SIZE' place the RESVEC
+ * block making sure the final alignment is correct.
+ */
+tlb_miss:
+ synco /* TAKum03020 (but probably a good idea anyway.) */
+ putcon SP, KCR1
+ movi reg_save_area, SP
+ /* SP is guaranteed 32-byte aligned. */
+ st.q SP, TLB_SAVED_R0 , r0
+ st.q SP, TLB_SAVED_R1 , r1
+ st.q SP, SAVED_R2 , r2
+ st.q SP, SAVED_R3 , r3
+ st.q SP, SAVED_R4 , r4
+ st.q SP, SAVED_R5 , r5
+ st.q SP, SAVED_R6 , r6
+ st.q SP, SAVED_R18, r18
+
+ /* Save R25 for safety; as/ld may want to use it to achieve the call to
+ * the code in mm/tlbmiss.c */
+ st.q SP, TLB_SAVED_R25, r25
+ gettr tr0, r2
+ gettr tr1, r3
+ gettr tr2, r4
+ gettr tr3, r5
+ gettr tr4, r18
+ st.q SP, SAVED_TR0 , r2
+ st.q SP, TLB_SAVED_TR1 , r3
+ st.q SP, TLB_SAVED_TR2 , r4
+ st.q SP, TLB_SAVED_TR3 , r5
+ st.q SP, TLB_SAVED_TR4 , r18
+
+ pt do_fast_page_fault, tr0
+ getcon SSR, r2
+ getcon EXPEVT, r3
+ getcon TEA, r4
+ shlri r2, 30, r2
+ andi r2, 1, r2 /* r2 = SSR.MD */
+ blink tr0, LINK
+
+ pt fixup_to_invoke_general_handler, tr1
+
+ /* If the fast path handler fixed the fault, just drop through quickly
+ to the restore code right away to return to the excepting context.
+ */
+ beqi/u r2, 0, tr1
+
+fast_tlb_miss_restore:
+ ld.q SP, SAVED_TR0, r2
+ ld.q SP, TLB_SAVED_TR1, r3
+ ld.q SP, TLB_SAVED_TR2, r4
+
+ ld.q SP, TLB_SAVED_TR3, r5
+ ld.q SP, TLB_SAVED_TR4, r18
+
+ ptabs r2, tr0
+ ptabs r3, tr1
+ ptabs r4, tr2
+ ptabs r5, tr3
+ ptabs r18, tr4
+
+ ld.q SP, TLB_SAVED_R0, r0
+ ld.q SP, TLB_SAVED_R1, r1
+ ld.q SP, SAVED_R2, r2
+ ld.q SP, SAVED_R3, r3
+ ld.q SP, SAVED_R4, r4
+ ld.q SP, SAVED_R5, r5
+ ld.q SP, SAVED_R6, r6
+ ld.q SP, SAVED_R18, r18
+ ld.q SP, TLB_SAVED_R25, r25
+
+ getcon KCR1, SP
+ rte
+ nop /* for safety, in case the code is run on sh5-101 cut1.x */
+
+fixup_to_invoke_general_handler:
+
+ /* OK, new method. Restore stuff that's not expected to get saved into
+ the 'first-level' reg save area, then just fall through to setting
+ up the registers and calling the second-level handler. */
+
+ /* 2nd level expects r2,3,4,5,6,18,tr0 to be saved. So we must restore
+ r25,tr1-4 and save r6 to get into the right state. */
+
+ ld.q SP, TLB_SAVED_TR1, r3
+ ld.q SP, TLB_SAVED_TR2, r4
+ ld.q SP, TLB_SAVED_TR3, r5
+ ld.q SP, TLB_SAVED_TR4, r18
+ ld.q SP, TLB_SAVED_R25, r25
+
+ ld.q SP, TLB_SAVED_R0, r0
+ ld.q SP, TLB_SAVED_R1, r1
+
+ ptabs/u r3, tr1
+ ptabs/u r4, tr2
+ ptabs/u r5, tr3
+ ptabs/u r18, tr4
+
+ /* Set args for Non-debug, TLB miss class handler */
+ getcon EXPEVT, r2
+ movi ret_from_exception, r3
+ ori r3, 1, r3
+ movi EVENT_FAULT_TLB, r4
+ or SP, ZERO, r5
+ getcon KCR1, SP
+ pta handle_exception, tr0
+ blink tr0, ZERO
+
+/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
+ DOES END UP AT VBR+0x600 */
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ .balign 256
+ /* VBR + 0x600 */
+
+interrupt:
+ synco /* TAKum03020 (but probably a good idea anyway.) */
+ /* Save original stack pointer into KCR1 */
+ putcon SP, KCR1
+
+ /* Save other original registers into reg_save_area */
+ movi reg_save_area, SP
+ st.q SP, SAVED_R2, r2
+ st.q SP, SAVED_R3, r3
+ st.q SP, SAVED_R4, r4
+ st.q SP, SAVED_R5, r5
+ st.q SP, SAVED_R6, r6
+ st.q SP, SAVED_R18, r18
+ gettr tr0, r3
+ st.q SP, SAVED_TR0, r3
+
+ /* Set args for interrupt class handler */
+ getcon INTEVT, r2
+ movi ret_from_irq, r3
+ ori r3, 1, r3
+ movi EVENT_INTERRUPT, r4
+ or SP, ZERO, r5
+ getcon KCR1, SP
+ pta handle_exception, tr0
+ blink tr0, ZERO
+ .balign TEXT_SIZE /* let's waste the bare minimum */
+
+LVBR_block_end: /* Marker. Used for total checking */
+
+ .balign 256
+LRESVEC_block:
+ /* Panic handler. Called with MMU off. Possible causes/actions:
+ * - Reset: Jump to program start.
+ * - Single Step: Turn off Single Step & return.
+ * - Others: Call panic handler, passing PC as arg.
+ * (this may need to be extended...)
+ */
+reset_or_panic:
+ synco /* TAKum03020 (but probably a good idea anyway.) */
+ putcon SP, DCR
+ /* First save r0-1 and tr0, as we need to use these */
+ movi resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
+ st.q SP, 0, r0
+ st.q SP, 8, r1
+ gettr tr0, r0
+ st.q SP, 32, r0
+
+ /* Check cause */
+ getcon EXPEVT, r0
+ movi RESET_CAUSE, r1
+ sub r1, r0, r1 /* r1=0 if reset */
+ movi _stext-CONFIG_CACHED_MEMORY_OFFSET, r0
+ ori r0, 1, r0
+ ptabs r0, tr0
+ beqi r1, 0, tr0 /* Jump to start address if reset */
+
+ getcon EXPEVT, r0
+ movi DEBUGSS_CAUSE, r1
+ sub r1, r0, r1 /* r1=0 if single step */
+ pta single_step_panic, tr0
+ beqi r1, 0, tr0 /* jump if single step */
+
+ /* Now jump to where we save the registers. */
+ movi panic_stash_regs-CONFIG_CACHED_MEMORY_OFFSET, r1
+ ptabs r1, tr0
+ blink tr0, r63
+
+single_step_panic:
+ /* We are in a handler with Single Step set. We need to resume the
+ * handler, by turning on MMU & turning off Single Step. */
+ getcon SSR, r0
+ movi SR_MMU, r1
+ or r0, r1, r0
+ movi ~SR_SS, r1
+ and r0, r1, r0
+ putcon r0, SSR
+ /* Restore EXPEVT, as the rte won't do this */
+ getcon PEXPEVT, r0
+ putcon r0, EXPEVT
+ /* Restore regs */
+ ld.q SP, 32, r0
+ ptabs r0, tr0
+ ld.q SP, 0, r0
+ ld.q SP, 8, r1
+ getcon DCR, SP
+ synco
+ rte
+
+
+ .balign 256
+debug_exception:
+ synco /* TAKum03020 (but probably a good idea anyway.) */
+ /*
+ * Single step/software_break_point first level handler.
+ * Called with MMU off, so the first thing we do is enable it
+ * by doing an rte with appropriate SSR.
+ */
+ putcon SP, DCR
+ /* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */
+ movi resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
+
+ /* With the MMU off, we are bypassing the cache, so purge any
+ * data that will be made stale by the following stores.
+ */
+ ocbp SP, 0
+ synco
+
+ st.q SP, 0, r0
+ st.q SP, 8, r1
+ getcon SPC, r0
+ st.q SP, 16, r0
+ getcon SSR, r0
+ st.q SP, 24, r0
+
+ /* Enable MMU, block exceptions, set priv mode, disable single step */
+ movi SR_MMU | SR_BL | SR_MD, r1
+ or r0, r1, r0
+ movi ~SR_SS, r1
+ and r0, r1, r0
+ putcon r0, SSR
+ /* Force control to debug_exception_2 when rte is executed */
+ movi debug_exeception_2, r0
+ ori r0, 1, r0 /* force SHmedia, just in case */
+ putcon r0, SPC
+ getcon DCR, SP
+ synco
+ rte
+debug_exeception_2:
+ /* Restore saved regs */
+ putcon SP, KCR1
+ movi resvec_save_area, SP
+ ld.q SP, 24, r0
+ putcon r0, SSR
+ ld.q SP, 16, r0
+ putcon r0, SPC
+ ld.q SP, 0, r0
+ ld.q SP, 8, r1
+
+ /* Save other original registers into reg_save_area */
+ movi reg_save_area, SP
+ st.q SP, SAVED_R2, r2
+ st.q SP, SAVED_R3, r3
+ st.q SP, SAVED_R4, r4
+ st.q SP, SAVED_R5, r5
+ st.q SP, SAVED_R6, r6
+ st.q SP, SAVED_R18, r18
+ gettr tr0, r3
+ st.q SP, SAVED_TR0, r3
+
+ /* Set args for debug class handler */
+ getcon EXPEVT, r2
+ movi ret_from_exception, r3
+ ori r3, 1, r3
+ movi EVENT_DEBUG, r4
+ or SP, ZERO, r5
+ getcon KCR1, SP
+ pta handle_exception, tr0
+ blink tr0, ZERO
+
+ .balign 256
+debug_interrupt:
+ /* !!! WE COME HERE IN REAL MODE !!! */
+ /* Hook-up debug interrupt to allow various debugging options to be
+ * hooked into its handler. */
+ /* Save original stack pointer into KCR1 */
+ synco
+ putcon SP, KCR1
+ movi resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
+ ocbp SP, 0
+ ocbp SP, 32
+ synco
+
+ /* Save other original registers into reg_save_area thru real addresses */
+ st.q SP, SAVED_R2, r2
+ st.q SP, SAVED_R3, r3
+ st.q SP, SAVED_R4, r4
+ st.q SP, SAVED_R5, r5
+ st.q SP, SAVED_R6, r6
+ st.q SP, SAVED_R18, r18
+ gettr tr0, r3
+ st.q SP, SAVED_TR0, r3
+
+ /* move (spc,ssr)->(pspc,pssr). The rte will shift
+ them back again, so that they look like the originals
+ as far as the real handler code is concerned. */
+ getcon spc, r6
+ putcon r6, pspc
+ getcon ssr, r6
+ putcon r6, pssr
+
+ ! construct useful SR for handle_exception
+ movi 3, r6
+ shlli r6, 30, r6
+ getcon sr, r18
+ or r18, r6, r6
+ putcon r6, ssr
+
+ ! SSR is now the current SR with the MD and MMU bits set
+ ! i.e. the rte will switch back to priv mode and put
+ ! the mmu back on
+
+ ! construct spc
+ movi handle_exception, r18
+ ori r18, 1, r18 ! for safety (do we need this?)
+ putcon r18, spc
+
+ /* Set args for Non-debug, Not a TLB miss class handler */
+
+ ! EXPEVT==0x80 is unused, so 'steal' this value to put the
+ ! debug interrupt handler in the vectoring table
+ movi 0x80, r2
+ movi ret_from_exception, r3
+ ori r3, 1, r3
+ movi EVENT_FAULT_NOT_TLB, r4
+
+ or SP, ZERO, r5
+ movi CONFIG_CACHED_MEMORY_OFFSET, r6
+ add r6, r5, r5
+ getcon KCR1, SP
+
+ synco ! for safety
+ rte ! -> handle_exception, switch back to priv mode again
+
+LRESVEC_block_end: /* Marker. Unused. */
+
+ .balign TEXT_SIZE
+
+/*
+ * Second level handler for VBR-based exceptions. Pre-handler.
+ * In common to all stack-frame sensitive handlers.
+ *
+ * Inputs:
+ * (KCR0) Current [current task union]
+ * (KCR1) Original SP
+ * (r2) INTEVT/EXPEVT
+ * (r3) appropriate return address
+ * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug)
+ * (r5) Pointer to reg_save_area
+ * (SP) Original SP
+ *
+ * Available registers:
+ * (r6)
+ * (r18)
+ * (tr0)
+ *
+ */
+handle_exception:
+ /* Common 2nd level handler. */
+
+ /* First thing we need an appropriate stack pointer */
+ getcon SSR, r6
+ shlri r6, 30, r6
+ andi r6, 1, r6
+ pta stack_ok, tr0
+ bne r6, ZERO, tr0 /* Original stack pointer is fine */
+
+ /* Set stack pointer for user fault */
+ getcon KCR0, SP
+ movi THREAD_SIZE, r6 /* Point to the end */
+ add SP, r6, SP
+
+stack_ok:
+
+/* DEBUG : check for underflow/overflow of the kernel stack */
+ pta no_underflow, tr0
+ getcon KCR0, r6
+ movi 1024, r18
+ add r6, r18, r6
+ bge SP, r6, tr0 ! ? below 1k from bottom of stack : danger zone
+
+/* Just panic to cause a crash. */
+bad_sp:
+ ld.b r63, 0, r6
+ nop
+
+no_underflow:
+ pta bad_sp, tr0
+ getcon kcr0, r6
+ movi THREAD_SIZE, r18
+ add r18, r6, r6
+ bgt SP, r6, tr0 ! sp above the stack
+
+ /* Make some room for the BASIC frame. */
+ movi -(FRAME_SIZE), r6
+ add SP, r6, SP
+
+/* Could do this with no stalling if we had another spare register, but the
+ code below will be OK. */
+ ld.q r5, SAVED_R2, r6
+ ld.q r5, SAVED_R3, r18
+ st.q SP, FRAME_R(2), r6
+ ld.q r5, SAVED_R4, r6
+ st.q SP, FRAME_R(3), r18
+ ld.q r5, SAVED_R5, r18
+ st.q SP, FRAME_R(4), r6
+ ld.q r5, SAVED_R6, r6
+ st.q SP, FRAME_R(5), r18
+ ld.q r5, SAVED_R18, r18
+ st.q SP, FRAME_R(6), r6
+ ld.q r5, SAVED_TR0, r6
+ st.q SP, FRAME_R(18), r18
+ st.q SP, FRAME_T(0), r6
+
+ /* Keep old SP around */
+ getcon KCR1, r6
+
+ /* Save the rest of the general purpose registers */
+ st.q SP, FRAME_R(0), r0
+ st.q SP, FRAME_R(1), r1
+ st.q SP, FRAME_R(7), r7
+ st.q SP, FRAME_R(8), r8
+ st.q SP, FRAME_R(9), r9
+ st.q SP, FRAME_R(10), r10
+ st.q SP, FRAME_R(11), r11
+ st.q SP, FRAME_R(12), r12
+ st.q SP, FRAME_R(13), r13
+ st.q SP, FRAME_R(14), r14
+
+ /* SP is somewhere else */
+ st.q SP, FRAME_R(15), r6
+
+ st.q SP, FRAME_R(16), r16
+ st.q SP, FRAME_R(17), r17
+ /* r18 is saved earlier. */
+ st.q SP, FRAME_R(19), r19
+ st.q SP, FRAME_R(20), r20
+ st.q SP, FRAME_R(21), r21
+ st.q SP, FRAME_R(22), r22
+ st.q SP, FRAME_R(23), r23
+ st.q SP, FRAME_R(24), r24
+ st.q SP, FRAME_R(25), r25
+ st.q SP, FRAME_R(26), r26
+ st.q SP, FRAME_R(27), r27
+ st.q SP, FRAME_R(28), r28
+ st.q SP, FRAME_R(29), r29
+ st.q SP, FRAME_R(30), r30
+ st.q SP, FRAME_R(31), r31
+ st.q SP, FRAME_R(32), r32
+ st.q SP, FRAME_R(33), r33
+ st.q SP, FRAME_R(34), r34
+ st.q SP, FRAME_R(35), r35
+ st.q SP, FRAME_R(36), r36
+ st.q SP, FRAME_R(37), r37
+ st.q SP, FRAME_R(38), r38
+ st.q SP, FRAME_R(39), r39
+ st.q SP, FRAME_R(40), r40
+ st.q SP, FRAME_R(41), r41
+ st.q SP, FRAME_R(42), r42
+ st.q SP, FRAME_R(43), r43
+ st.q SP, FRAME_R(44), r44
+ st.q SP, FRAME_R(45), r45
+ st.q SP, FRAME_R(46), r46
+ st.q SP, FRAME_R(47), r47
+ st.q SP, FRAME_R(48), r48
+ st.q SP, FRAME_R(49), r49
+ st.q SP, FRAME_R(50), r50
+ st.q SP, FRAME_R(51), r51
+ st.q SP, FRAME_R(52), r52
+ st.q SP, FRAME_R(53), r53
+ st.q SP, FRAME_R(54), r54
+ st.q SP, FRAME_R(55), r55
+ st.q SP, FRAME_R(56), r56
+ st.q SP, FRAME_R(57), r57
+ st.q SP, FRAME_R(58), r58
+ st.q SP, FRAME_R(59), r59
+ st.q SP, FRAME_R(60), r60
+ st.q SP, FRAME_R(61), r61
+ st.q SP, FRAME_R(62), r62
+
+ /*
+ * Save the S* registers.
+ */
+ getcon SSR, r61
+ st.q SP, FRAME_S(FSSR), r61
+ getcon SPC, r62
+ st.q SP, FRAME_S(FSPC), r62
+ movi -1, r62 /* Reset syscall_nr */
+ st.q SP, FRAME_S(FSYSCALL_ID), r62
+
+ /* Save the rest of the target registers */
+ gettr tr1, r6
+ st.q SP, FRAME_T(1), r6
+ gettr tr2, r6
+ st.q SP, FRAME_T(2), r6
+ gettr tr3, r6
+ st.q SP, FRAME_T(3), r6
+ gettr tr4, r6
+ st.q SP, FRAME_T(4), r6
+ gettr tr5, r6
+ st.q SP, FRAME_T(5), r6
+ gettr tr6, r6
+ st.q SP, FRAME_T(6), r6
+ gettr tr7, r6
+ st.q SP, FRAME_T(7), r6
+
+ ! setup FP so that unwinder can wind back through nested kernel mode
+ ! exceptions
+ add SP, ZERO, r14
+
+#ifdef CONFIG_POOR_MANS_STRACE
+ /* We've pushed all the registers now, so only r2-r4 hold anything
+ * useful. Move them into callee save registers */
+ or r2, ZERO, r28
+ or r3, ZERO, r29
+ or r4, ZERO, r30
+
+ /* Preserve r2 as the event code */
+ movi evt_debug, r3
+ ori r3, 1, r3
+ ptabs r3, tr0
+
+ or SP, ZERO, r6
+ getcon TRA, r5
+ blink tr0, LINK
+
+ or r28, ZERO, r2
+ or r29, ZERO, r3
+ or r30, ZERO, r4
+#endif
+
+ /* For syscall and debug race condition, get TRA now */
+ getcon TRA, r5
+
+ /* We are in a safe position to turn SR.BL off, but set IMASK=0xf
+ * Also set FD, to catch FPU usage in the kernel.
+ *
+ * benedict.gaster@superh.com 29/07/2002
+ *
+ * On all SH5-101 revisions it is unsafe to raise the IMASK and at the
+ * same time change BL from 1->0, as any pending interrupt of a level
+ * higher than he previous value of IMASK will leak through and be
+ * taken unexpectedly.
+ *
+ * To avoid this we raise the IMASK and then issue another PUTCON to
+ * enable interrupts.
+ */
+ getcon SR, r6
+ movi SR_IMASK | SR_FD, r7
+ or r6, r7, r6
+ putcon r6, SR
+ movi SR_UNBLOCK_EXC, r7
+ and r6, r7, r6
+ putcon r6, SR
+
+
+ /* Now call the appropriate 3rd level handler */
+ or r3, ZERO, LINK
+ movi trap_jtable, r3
+ shlri r2, 3, r2
+ ldx.l r2, r3, r3
+ shlri r2, 2, r2
+ ptabs r3, tr0
+ or SP, ZERO, r3
+ blink tr0, ZERO
+
+/*
+ * Second level handler for VBR-based exceptions. Post-handlers.
+ *
+ * Post-handlers for interrupts (ret_from_irq), exceptions
+ * (ret_from_exception) and common reentrance doors (restore_all
+ * to get back to the original context, ret_from_syscall loop to
+ * check kernel exiting).
+ *
+ * ret_with_reschedule and work_notifysig are an inner lables of
+ * the ret_from_syscall loop.
+ *
+ * In common to all stack-frame sensitive handlers.
+ *
+ * Inputs:
+ * (SP) struct pt_regs *, original register's frame pointer (basic)
+ *
+ */
+ .global ret_from_irq
+ret_from_irq:
+#ifdef CONFIG_POOR_MANS_STRACE
+ pta evt_debug_ret_from_irq, tr0
+ ori SP, 0, r2
+ blink tr0, LINK
+#endif
+ ld.q SP, FRAME_S(FSSR), r6
+ shlri r6, 30, r6
+ andi r6, 1, r6
+ pta resume_kernel, tr0
+ bne r6, ZERO, tr0 /* no further checks */
+ STI()
+ pta ret_with_reschedule, tr0
+ blink tr0, ZERO /* Do not check softirqs */
+
+ .global ret_from_exception
+ret_from_exception:
+ preempt_stop()
+
+#ifdef CONFIG_POOR_MANS_STRACE
+ pta evt_debug_ret_from_exc, tr0
+ ori SP, 0, r2
+ blink tr0, LINK
+#endif
+
+ ld.q SP, FRAME_S(FSSR), r6
+ shlri r6, 30, r6
+ andi r6, 1, r6
+ pta resume_kernel, tr0
+ bne r6, ZERO, tr0 /* no further checks */
+
+ /* Check softirqs */
+
+#ifdef CONFIG_PREEMPT
+ pta ret_from_syscall, tr0
+ blink tr0, ZERO
+
+resume_kernel:
+ pta restore_all, tr0
+
+ getcon KCR0, r6
+ ld.l r6, TI_PRE_COUNT, r7
+ beq/u r7, ZERO, tr0
+
+need_resched:
+ ld.l r6, TI_FLAGS, r7
+ movi (1 << TIF_NEED_RESCHED), r8
+ and r8, r7, r8
+ bne r8, ZERO, tr0
+
+ getcon SR, r7
+ andi r7, 0xf0, r7
+ bne r7, ZERO, tr0
+
+ movi ((PREEMPT_ACTIVE >> 16) & 65535), r8
+ shori (PREEMPT_ACTIVE & 65535), r8
+ st.l r6, TI_PRE_COUNT, r8
+
+ STI()
+ movi schedule, r7
+ ori r7, 1, r7
+ ptabs r7, tr1
+ blink tr1, LINK
+
+ st.l r6, TI_PRE_COUNT, ZERO
+ CLI()
+
+ pta need_resched, tr1
+ blink tr1, ZERO
+#endif
+
+ .global ret_from_syscall
+ret_from_syscall:
+
+ret_with_reschedule:
+ getcon KCR0, r6 ! r6 contains current_thread_info
+ ld.l r6, TI_FLAGS, r7 ! r7 contains current_thread_info->flags
+
+ ! FIXME:!!!
+ ! no handling of TIF_SYSCALL_TRACE yet!!
+
+ movi (1 << TIF_NEED_RESCHED), r8
+ and r8, r7, r8
+ pta work_resched, tr0
+ bne r8, ZERO, tr0
+
+ pta restore_all, tr1
+
+ movi (1 << TIF_SIGPENDING), r8
+ and r8, r7, r8
+ pta work_notifysig, tr0
+ bne r8, ZERO, tr0
+
+ blink tr1, ZERO
+
+work_resched:
+ pta ret_from_syscall, tr0
+ gettr tr0, LINK
+ movi schedule, r6
+ ptabs r6, tr0
+ blink tr0, ZERO /* Call schedule(), return on top */
+
+work_notifysig:
+ gettr tr1, LINK
+
+ movi do_signal, r6
+ ptabs r6, tr0
+ or SP, ZERO, r2
+ or ZERO, ZERO, r3
+ blink tr0, LINK /* Call do_signal(regs, 0), return here */
+
+restore_all:
+ /* Do prefetches */
+
+ ld.q SP, FRAME_T(0), r6
+ ld.q SP, FRAME_T(1), r7
+ ld.q SP, FRAME_T(2), r8
+ ld.q SP, FRAME_T(3), r9
+ ptabs r6, tr0
+ ptabs r7, tr1
+ ptabs r8, tr2
+ ptabs r9, tr3
+ ld.q SP, FRAME_T(4), r6
+ ld.q SP, FRAME_T(5), r7
+ ld.q SP, FRAME_T(6), r8
+ ld.q SP, FRAME_T(7), r9
+ ptabs r6, tr4
+ ptabs r7, tr5
+ ptabs r8, tr6
+ ptabs r9, tr7
+
+ ld.q SP, FRAME_R(0), r0
+ ld.q SP, FRAME_R(1), r1
+ ld.q SP, FRAME_R(2), r2
+ ld.q SP, FRAME_R(3), r3
+ ld.q SP, FRAME_R(4), r4
+ ld.q SP, FRAME_R(5), r5
+ ld.q SP, FRAME_R(6), r6
+ ld.q SP, FRAME_R(7), r7
+ ld.q SP, FRAME_R(8), r8
+ ld.q SP, FRAME_R(9), r9
+ ld.q SP, FRAME_R(10), r10
+ ld.q SP, FRAME_R(11), r11
+ ld.q SP, FRAME_R(12), r12
+ ld.q SP, FRAME_R(13), r13
+ ld.q SP, FRAME_R(14), r14
+
+ ld.q SP, FRAME_R(16), r16
+ ld.q SP, FRAME_R(17), r17
+ ld.q SP, FRAME_R(18), r18
+ ld.q SP, FRAME_R(19), r19
+ ld.q SP, FRAME_R(20), r20
+ ld.q SP, FRAME_R(21), r21
+ ld.q SP, FRAME_R(22), r22
+ ld.q SP, FRAME_R(23), r23
+ ld.q SP, FRAME_R(24), r24
+ ld.q SP, FRAME_R(25), r25
+ ld.q SP, FRAME_R(26), r26
+ ld.q SP, FRAME_R(27), r27
+ ld.q SP, FRAME_R(28), r28
+ ld.q SP, FRAME_R(29), r29
+ ld.q SP, FRAME_R(30), r30
+ ld.q SP, FRAME_R(31), r31
+ ld.q SP, FRAME_R(32), r32
+ ld.q SP, FRAME_R(33), r33
+ ld.q SP, FRAME_R(34), r34
+ ld.q SP, FRAME_R(35), r35
+ ld.q SP, FRAME_R(36), r36
+ ld.q SP, FRAME_R(37), r37
+ ld.q SP, FRAME_R(38), r38
+ ld.q SP, FRAME_R(39), r39
+ ld.q SP, FRAME_R(40), r40
+ ld.q SP, FRAME_R(41), r41
+ ld.q SP, FRAME_R(42), r42
+ ld.q SP, FRAME_R(43), r43
+ ld.q SP, FRAME_R(44), r44
+ ld.q SP, FRAME_R(45), r45
+ ld.q SP, FRAME_R(46), r46
+ ld.q SP, FRAME_R(47), r47
+ ld.q SP, FRAME_R(48), r48
+ ld.q SP, FRAME_R(49), r49
+ ld.q SP, FRAME_R(50), r50
+ ld.q SP, FRAME_R(51), r51
+ ld.q SP, FRAME_R(52), r52
+ ld.q SP, FRAME_R(53), r53
+ ld.q SP, FRAME_R(54), r54
+ ld.q SP, FRAME_R(55), r55
+ ld.q SP, FRAME_R(56), r56
+ ld.q SP, FRAME_R(57), r57
+ ld.q SP, FRAME_R(58), r58
+
+ getcon SR, r59
+ movi SR_BLOCK_EXC, r60
+ or r59, r60, r59
+ putcon r59, SR /* SR.BL = 1, keep nesting out */
+ ld.q SP, FRAME_S(FSSR), r61
+ ld.q SP, FRAME_S(FSPC), r62
+ movi SR_ASID_MASK, r60
+ and r59, r60, r59
+ andc r61, r60, r61 /* Clear out older ASID */
+ or r59, r61, r61 /* Retain current ASID */
+ putcon r61, SSR
+ putcon r62, SPC
+
+ /* Ignore FSYSCALL_ID */
+
+ ld.q SP, FRAME_R(59), r59
+ ld.q SP, FRAME_R(60), r60
+ ld.q SP, FRAME_R(61), r61
+ ld.q SP, FRAME_R(62), r62
+
+ /* Last touch */
+ ld.q SP, FRAME_R(15), SP
+ rte
+ nop
+
+/*
+ * Third level handlers for VBR-based exceptions. Adapting args to
+ * and/or deflecting to fourth level handlers.
+ *
+ * Fourth level handlers interface.
+ * Most are C-coded handlers directly pointed by the trap_jtable.
+ * (Third = Fourth level)
+ * Inputs:
+ * (r2) fault/interrupt code, entry number (e.g. NMI = 14,
+ * IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...)
+ * (r3) struct pt_regs *, original register's frame pointer
+ * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault)
+ * (r5) TRA control register (for syscall/debug benefit only)
+ * (LINK) return address
+ * (SP) = r3
+ *
+ * Kernel TLB fault handlers will get a slightly different interface.
+ * (r2) struct pt_regs *, original register's frame pointer
+ * (r3) writeaccess, whether it's a store fault as opposed to load fault
+ * (r4) execaccess, whether it's a ITLB fault as opposed to DTLB fault
+ * (r5) Effective Address of fault
+ * (LINK) return address
+ * (SP) = r2
+ *
+ * fpu_error_or_IRQ? is a helper to deflect to the right cause.
+ *
+ */
+tlb_miss_load:
+ or SP, ZERO, r2
+ or ZERO, ZERO, r3 /* Read */
+ or ZERO, ZERO, r4 /* Data */
+ getcon TEA, r5
+ pta call_do_page_fault, tr0
+ beq ZERO, ZERO, tr0
+
+tlb_miss_store:
+ or SP, ZERO, r2
+ movi 1, r3 /* Write */
+ or ZERO, ZERO, r4 /* Data */
+ getcon TEA, r5
+ pta call_do_page_fault, tr0
+ beq ZERO, ZERO, tr0
+
+itlb_miss_or_IRQ:
+ pta its_IRQ, tr0
+ beqi/u r4, EVENT_INTERRUPT, tr0
+ or SP, ZERO, r2
+ or ZERO, ZERO, r3 /* Read */
+ movi 1, r4 /* Text */
+ getcon TEA, r5
+ /* Fall through */
+
+call_do_page_fault:
+ movi do_page_fault, r6
+ ptabs r6, tr0
+ blink tr0, ZERO
+
+fpu_error_or_IRQA:
+ pta its_IRQ, tr0
+ beqi/l r4, EVENT_INTERRUPT, tr0
+#ifdef CONFIG_SH_FPU
+ movi do_fpu_state_restore, r6
+#else
+ movi do_exception_error, r6
+#endif
+ ptabs r6, tr0
+ blink tr0, ZERO
+
+fpu_error_or_IRQB:
+ pta its_IRQ, tr0
+ beqi/l r4, EVENT_INTERRUPT, tr0
+#ifdef CONFIG_SH_FPU
+ movi do_fpu_state_restore, r6
+#else
+ movi do_exception_error, r6
+#endif
+ ptabs r6, tr0
+ blink tr0, ZERO
+
+its_IRQ:
+ movi do_IRQ, r6
+ ptabs r6, tr0
+ blink tr0, ZERO
+
+/*
+ * system_call/unknown_trap third level handler:
+ *
+ * Inputs:
+ * (r2) fault/interrupt code, entry number (TRAP = 11)
+ * (r3) struct pt_regs *, original register's frame pointer
+ * (r4) Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault)
+ * (r5) TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr)
+ * (SP) = r3
+ * (LINK) return address: ret_from_exception
+ * (*r3) Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7)
+ *
+ * Outputs:
+ * (*r3) Syscall reply (Saved r2)
+ * (LINK) In case of syscall only it can be scrapped.
+ * Common second level post handler will be ret_from_syscall.
+ * Common (non-trace) exit point to that is syscall_ret (saving
+ * result to r2). Common bad exit point is syscall_bad (returning
+ * ENOSYS then saved to r2).
+ *
+ */
+
+unknown_trap:
+ /* Unknown Trap or User Trace */
+ movi do_unknown_trapa, r6
+ ptabs r6, tr0
+ ld.q r3, FRAME_R(9), r2 /* r2 = #arg << 16 | syscall # */
+ andi r2, 0x1ff, r2 /* r2 = syscall # */
+ blink tr0, LINK
+
+ pta syscall_ret, tr0
+ blink tr0, ZERO
+
+ /* New syscall implementation*/
+system_call:
+ pta unknown_trap, tr0
+ or r5, ZERO, r4 /* TRA (=r5) -> r4 */
+ shlri r4, 20, r4
+ bnei r4, 1, tr0 /* unknown_trap if not 0x1yzzzz */
+
+ /* It's a system call */
+ st.q r3, FRAME_S(FSYSCALL_ID), r5 /* ID (0x1yzzzz) -> stack */
+ andi r5, 0x1ff, r5 /* syscall # -> r5 */
+
+ STI()
+
+ pta syscall_allowed, tr0
+ movi NR_syscalls - 1, r4 /* Last valid */
+ bgeu/l r4, r5, tr0
+
+syscall_bad:
+ /* Return ENOSYS ! */
+ movi -(ENOSYS), r2 /* Fall-through */
+
+ .global syscall_ret
+syscall_ret:
+ st.q SP, FRAME_R(9), r2 /* Expecting SP back to BASIC frame */
+
+#ifdef CONFIG_POOR_MANS_STRACE
+ /* nothing useful in registers at this point */
+
+ movi evt_debug2, r5
+ ori r5, 1, r5
+ ptabs r5, tr0
+ ld.q SP, FRAME_R(9), r2
+ or SP, ZERO, r3
+ blink tr0, LINK
+#endif
+
+ ld.q SP, FRAME_S(FSPC), r2
+ addi r2, 4, r2 /* Move PC, being pre-execution event */
+ st.q SP, FRAME_S(FSPC), r2
+ pta ret_from_syscall, tr0
+ blink tr0, ZERO
+
+
+/* A different return path for ret_from_fork, because we now need
+ * to call schedule_tail with the later kernels. Because prev is
+ * loaded into r2 by switch_to() means we can just call it straight away
+ */
+
+.global ret_from_fork
+ret_from_fork:
+
+ movi schedule_tail,r5
+ ori r5, 1, r5
+ ptabs r5, tr0
+ blink tr0, LINK
+
+#ifdef CONFIG_POOR_MANS_STRACE
+ /* nothing useful in registers at this point */
+
+ movi evt_debug2, r5
+ ori r5, 1, r5
+ ptabs r5, tr0
+ ld.q SP, FRAME_R(9), r2
+ or SP, ZERO, r3
+ blink tr0, LINK
+#endif
+
+ ld.q SP, FRAME_S(FSPC), r2
+ addi r2, 4, r2 /* Move PC, being pre-execution event */
+ st.q SP, FRAME_S(FSPC), r2
+ pta ret_from_syscall, tr0
+ blink tr0, ZERO
+
+
+
+syscall_allowed:
+ /* Use LINK to deflect the exit point, default is syscall_ret */
+ pta syscall_ret, tr0
+ gettr tr0, LINK
+ pta syscall_notrace, tr0
+
+ getcon KCR0, r2
+ ld.l r2, TI_FLAGS, r4
+ movi (1 << TIF_SYSCALL_TRACE), r6
+ and r6, r4, r6
+ beq/l r6, ZERO, tr0
+
+ /* Trace it by calling syscall_trace before and after */
+ movi syscall_trace, r4
+ ptabs r4, tr0
+ blink tr0, LINK
+ /* Reload syscall number as r5 is trashed by syscall_trace */
+ ld.q SP, FRAME_S(FSYSCALL_ID), r5
+ andi r5, 0x1ff, r5
+
+ pta syscall_ret_trace, tr0
+ gettr tr0, LINK
+
+syscall_notrace:
+ /* Now point to the appropriate 4th level syscall handler */
+ movi sys_call_table, r4
+ shlli r5, 2, r5
+ ldx.l r4, r5, r5
+ ptabs r5, tr0
+
+ /* Prepare original args */
+ ld.q SP, FRAME_R(2), r2
+ ld.q SP, FRAME_R(3), r3
+ ld.q SP, FRAME_R(4), r4
+ ld.q SP, FRAME_R(5), r5
+ ld.q SP, FRAME_R(6), r6
+ ld.q SP, FRAME_R(7), r7
+
+ /* And now the trick for those syscalls requiring regs * ! */
+ or SP, ZERO, r8
+
+ /* Call it */
+ blink tr0, ZERO /* LINK is already properly set */
+
+syscall_ret_trace:
+ /* We get back here only if under trace */
+ st.q SP, FRAME_R(9), r2 /* Save return value */
+
+ movi syscall_trace, LINK
+ ptabs LINK, tr0
+ blink tr0, LINK
+
+ /* This needs to be done after any syscall tracing */
+ ld.q SP, FRAME_S(FSPC), r2
+ addi r2, 4, r2 /* Move PC, being pre-execution event */
+ st.q SP, FRAME_S(FSPC), r2
+
+ pta ret_from_syscall, tr0
+ blink tr0, ZERO /* Resume normal return sequence */
+
+/*
+ * --- Switch to running under a particular ASID and return the previous ASID value
+ * --- The caller is assumed to have done a cli before calling this.
+ *
+ * Input r2 : new ASID
+ * Output r2 : old ASID
+ */
+
+ .global switch_and_save_asid
+switch_and_save_asid:
+ getcon sr, r0
+ movi 255, r4
+ shlli r4, 16, r4 /* r4 = mask to select ASID */
+ and r0, r4, r3 /* r3 = shifted old ASID */
+ andi r2, 255, r2 /* mask down new ASID */
+ shlli r2, 16, r2 /* align new ASID against SR.ASID */
+ andc r0, r4, r0 /* efface old ASID from SR */
+ or r0, r2, r0 /* insert the new ASID */
+ putcon r0, ssr
+ movi 1f, r0
+ putcon r0, spc
+ rte
+ nop
+1:
+ ptabs LINK, tr0
+ shlri r3, 16, r2 /* r2 = old ASID */
+ blink tr0, r63
+
+ .global route_to_panic_handler
+route_to_panic_handler:
+ /* Switch to real mode, goto panic_handler, don't return. Useful for
+ last-chance debugging, e.g. if no output wants to go to the console.
+ */
+
+ movi panic_handler - CONFIG_CACHED_MEMORY_OFFSET, r1
+ ptabs r1, tr0
+ pta 1f, tr1
+ gettr tr1, r0
+ putcon r0, spc
+ getcon sr, r0
+ movi 1, r1
+ shlli r1, 31, r1
+ andc r0, r1, r0
+ putcon r0, ssr
+ rte
+ nop
+1: /* Now in real mode */
+ blink tr0, r63
+ nop
+
+ .global peek_real_address_q
+peek_real_address_q:
+ /* Two args:
+ r2 : real mode address to peek
+ r2(out) : result quadword
+
+ This is provided as a cheapskate way of manipulating device
+ registers for debugging (to avoid the need to onchip_remap the debug
+ module, and to avoid the need to onchip_remap the watchpoint
+ controller in a way that identity maps sufficient bits to avoid the
+ SH5-101 cut2 silicon defect).
+
+ This code is not performance critical
+ */
+
+ add.l r2, r63, r2 /* sign extend address */
+ getcon sr, r0 /* r0 = saved original SR */
+ movi 1, r1
+ shlli r1, 28, r1
+ or r0, r1, r1 /* r0 with block bit set */
+ putcon r1, sr /* now in critical section */
+ movi 1, r36
+ shlli r36, 31, r36
+ andc r1, r36, r1 /* turn sr.mmu off in real mode section */
+
+ putcon r1, ssr
+ movi .peek0 - CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */
+ movi 1f, r37 /* virtual mode return addr */
+ putcon r36, spc
+
+ synco
+ rte
+ nop
+
+.peek0: /* come here in real mode, don't touch caches!!
+ still in critical section (sr.bl==1) */
+ putcon r0, ssr
+ putcon r37, spc
+ /* Here's the actual peek. If the address is bad, all bets are now off
+ * what will happen (handlers invoked in real-mode = bad news) */
+ ld.q r2, 0, r2
+ synco
+ rte /* Back to virtual mode */
+ nop
+
+1:
+ ptabs LINK, tr0
+ blink tr0, r63
+
+ .global poke_real_address_q
+poke_real_address_q:
+ /* Two args:
+ r2 : real mode address to poke
+ r3 : quadword value to write.
+
+ This is provided as a cheapskate way of manipulating device
+ registers for debugging (to avoid the need to onchip_remap the debug
+ module, and to avoid the need to onchip_remap the watchpoint
+ controller in a way that identity maps sufficient bits to avoid the
+ SH5-101 cut2 silicon defect).
+
+ This code is not performance critical
+ */
+
+ add.l r2, r63, r2 /* sign extend address */
+ getcon sr, r0 /* r0 = saved original SR */
+ movi 1, r1
+ shlli r1, 28, r1
+ or r0, r1, r1 /* r0 with block bit set */
+ putcon r1, sr /* now in critical section */
+ movi 1, r36
+ shlli r36, 31, r36
+ andc r1, r36, r1 /* turn sr.mmu off in real mode section */
+
+ putcon r1, ssr
+ movi .poke0-CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */
+ movi 1f, r37 /* virtual mode return addr */
+ putcon r36, spc
+
+ synco
+ rte
+ nop
+
+.poke0: /* come here in real mode, don't touch caches!!
+ still in critical section (sr.bl==1) */
+ putcon r0, ssr
+ putcon r37, spc
+ /* Here's the actual poke. If the address is bad, all bets are now off
+ * what will happen (handlers invoked in real-mode = bad news) */
+ st.q r2, 0, r3
+ synco
+ rte /* Back to virtual mode */
+ nop
+
+1:
+ ptabs LINK, tr0
+ blink tr0, r63
+
+/*
+ * --- User Access Handling Section
+ */
+
+/*
+ * User Access support. It all moved to non inlined Assembler
+ * functions in here.
+ *
+ * __kernel_size_t __copy_user(void *__to, const void *__from,
+ * __kernel_size_t __n)
+ *
+ * Inputs:
+ * (r2) target address
+ * (r3) source address
+ * (r4) size in bytes
+ *
+ * Ouputs:
+ * (*r2) target data
+ * (r2) non-copied bytes
+ *
+ * If a fault occurs on the user pointer, bail out early and return the
+ * number of bytes not copied in r2.
+ * Strategy : for large blocks, call a real memcpy function which can
+ * move >1 byte at a time using unaligned ld/st instructions, and can
+ * manipulate the cache using prefetch + alloco to improve the speed
+ * further. If a fault occurs in that function, just revert to the
+ * byte-by-byte approach used for small blocks; this is rare so the
+ * performance hit for that case does not matter.
+ *
+ * For small blocks it's not worth the overhead of setting up and calling
+ * the memcpy routine; do the copy a byte at a time.
+ *
+ */
+ .global __copy_user
+__copy_user:
+ pta __copy_user_byte_by_byte, tr1
+ movi 16, r0 ! this value is a best guess, should tune it by benchmarking
+ bge/u r0, r4, tr1
+ pta copy_user_memcpy, tr0
+ addi SP, -32, SP
+ /* Save arguments in case we have to fix-up unhandled page fault */
+ st.q SP, 0, r2
+ st.q SP, 8, r3
+ st.q SP, 16, r4
+ st.q SP, 24, r35 ! r35 is callee-save
+ /* Save LINK in a register to reduce RTS time later (otherwise
+ ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */
+ ori LINK, 0, r35
+ blink tr0, LINK
+
+ /* Copy completed normally if we get back here */
+ ptabs r35, tr0
+ ld.q SP, 24, r35
+ /* don't restore r2-r4, pointless */
+ /* set result=r2 to zero as the copy must have succeeded. */
+ or r63, r63, r2
+ addi SP, 32, SP
+ blink tr0, r63 ! RTS
+
+ .global __copy_user_fixup
+__copy_user_fixup:
+ /* Restore stack frame */
+ ori r35, 0, LINK
+ ld.q SP, 24, r35
+ ld.q SP, 16, r4
+ ld.q SP, 8, r3
+ ld.q SP, 0, r2
+ addi SP, 32, SP
+ /* Fall through to original code, in the 'same' state we entered with */
+
+/* The slow byte-by-byte method is used if the fast copy traps due to a bad
+ user address. In that rare case, the speed drop can be tolerated. */
+__copy_user_byte_by_byte:
+ pta ___copy_user_exit, tr1
+ pta ___copy_user1, tr0
+ beq/u r4, r63, tr1 /* early exit for zero length copy */
+ sub r2, r3, r0
+ addi r0, -1, r0
+
+___copy_user1:
+ ld.b r3, 0, r5 /* Fault address 1 */
+
+ /* Could rewrite this to use just 1 add, but the second comes 'free'
+ due to load latency */
+ addi r3, 1, r3
+ addi r4, -1, r4 /* No real fixup required */
+___copy_user2:
+ stx.b r3, r0, r5 /* Fault address 2 */
+ bne r4, ZERO, tr0
+
+___copy_user_exit:
+ or r4, ZERO, r2
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+/*
+ * __kernel_size_t __clear_user(void *addr, __kernel_size_t size)
+ *
+ * Inputs:
+ * (r2) target address
+ * (r3) size in bytes
+ *
+ * Ouputs:
+ * (*r2) zero-ed target data
+ * (r2) non-zero-ed bytes
+ */
+ .global __clear_user
+__clear_user:
+ pta ___clear_user_exit, tr1
+ pta ___clear_user1, tr0
+ beq/u r3, r63, tr1
+
+___clear_user1:
+ st.b r2, 0, ZERO /* Fault address */
+ addi r2, 1, r2
+ addi r3, -1, r3 /* No real fixup required */
+ bne r3, ZERO, tr0
+
+___clear_user_exit:
+ or r3, ZERO, r2
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+
+/*
+ * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
+ * int __count)
+ *
+ * Inputs:
+ * (r2) target address
+ * (r3) source address
+ * (r4) maximum size in bytes
+ *
+ * Ouputs:
+ * (*r2) copied data
+ * (r2) -EFAULT (in case of faulting)
+ * copied data (otherwise)
+ */
+ .global __strncpy_from_user
+__strncpy_from_user:
+ pta ___strncpy_from_user1, tr0
+ pta ___strncpy_from_user_done, tr1
+ or r4, ZERO, r5 /* r5 = original count */
+ beq/u r4, r63, tr1 /* early exit if r4==0 */
+ movi -(EFAULT), r6 /* r6 = reply, no real fixup */
+ or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */
+
+___strncpy_from_user1:
+ ld.b r3, 0, r7 /* Fault address: only in reading */
+ st.b r2, 0, r7
+ addi r2, 1, r2
+ addi r3, 1, r3
+ beq/u ZERO, r7, tr1
+ addi r4, -1, r4 /* return real number of copied bytes */
+ bne/l ZERO, r4, tr0
+
+___strncpy_from_user_done:
+ sub r5, r4, r6 /* If done, return copied */
+
+___strncpy_from_user_exit:
+ or r6, ZERO, r2
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+/*
+ * extern long __strnlen_user(const char *__s, long __n)
+ *
+ * Inputs:
+ * (r2) source address
+ * (r3) source size in bytes
+ *
+ * Ouputs:
+ * (r2) -EFAULT (in case of faulting)
+ * string length (otherwise)
+ */
+ .global __strnlen_user
+__strnlen_user:
+ pta ___strnlen_user_set_reply, tr0
+ pta ___strnlen_user1, tr1
+ or ZERO, ZERO, r5 /* r5 = counter */
+ movi -(EFAULT), r6 /* r6 = reply, no real fixup */
+ or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */
+ beq r3, ZERO, tr0
+
+___strnlen_user1:
+ ldx.b r2, r5, r7 /* Fault address: only in reading */
+ addi r3, -1, r3 /* No real fixup */
+ addi r5, 1, r5
+ beq r3, ZERO, tr0
+ bne r7, ZERO, tr1
+! The line below used to be active. This meant led to a junk byte lying between each pair
+! of entries in the argv & envp structures in memory. Whilst the program saw the right data
+! via the argv and envp arguments to main, it meant the 'flat' representation visible through
+! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
+! addi r5, 1, r5 /* Include '\0' */
+
+___strnlen_user_set_reply:
+ or r5, ZERO, r6 /* If done, return counter */
+
+___strnlen_user_exit:
+ or r6, ZERO, r2
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+/*
+ * extern long __get_user_asm_?(void *val, long addr)
+ *
+ * Inputs:
+ * (r2) dest address
+ * (r3) source address (in User Space)
+ *
+ * Ouputs:
+ * (r2) -EFAULT (faulting)
+ * 0 (not faulting)
+ */
+ .global __get_user_asm_b
+__get_user_asm_b:
+ or r2, ZERO, r4
+ movi -(EFAULT), r2 /* r2 = reply, no real fixup */
+
+___get_user_asm_b1:
+ ld.b r3, 0, r5 /* r5 = data */
+ st.b r4, 0, r5
+ or ZERO, ZERO, r2
+
+___get_user_asm_b_exit:
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+
+ .global __get_user_asm_w
+__get_user_asm_w:
+ or r2, ZERO, r4
+ movi -(EFAULT), r2 /* r2 = reply, no real fixup */
+
+___get_user_asm_w1:
+ ld.w r3, 0, r5 /* r5 = data */
+ st.w r4, 0, r5
+ or ZERO, ZERO, r2
+
+___get_user_asm_w_exit:
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+
+ .global __get_user_asm_l
+__get_user_asm_l:
+ or r2, ZERO, r4
+ movi -(EFAULT), r2 /* r2 = reply, no real fixup */
+
+___get_user_asm_l1:
+ ld.l r3, 0, r5 /* r5 = data */
+ st.l r4, 0, r5
+ or ZERO, ZERO, r2
+
+___get_user_asm_l_exit:
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+
+ .global __get_user_asm_q
+__get_user_asm_q:
+ or r2, ZERO, r4
+ movi -(EFAULT), r2 /* r2 = reply, no real fixup */
+
+___get_user_asm_q1:
+ ld.q r3, 0, r5 /* r5 = data */
+ st.q r4, 0, r5
+ or ZERO, ZERO, r2
+
+___get_user_asm_q_exit:
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+/*
+ * extern long __put_user_asm_?(void *pval, long addr)
+ *
+ * Inputs:
+ * (r2) kernel pointer to value
+ * (r3) dest address (in User Space)
+ *
+ * Ouputs:
+ * (r2) -EFAULT (faulting)
+ * 0 (not faulting)
+ */
+ .global __put_user_asm_b
+__put_user_asm_b:
+ ld.b r2, 0, r4 /* r4 = data */
+ movi -(EFAULT), r2 /* r2 = reply, no real fixup */
+
+___put_user_asm_b1:
+ st.b r3, 0, r4
+ or ZERO, ZERO, r2
+
+___put_user_asm_b_exit:
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+
+ .global __put_user_asm_w
+__put_user_asm_w:
+ ld.w r2, 0, r4 /* r4 = data */
+ movi -(EFAULT), r2 /* r2 = reply, no real fixup */
+
+___put_user_asm_w1:
+ st.w r3, 0, r4
+ or ZERO, ZERO, r2
+
+___put_user_asm_w_exit:
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+
+ .global __put_user_asm_l
+__put_user_asm_l:
+ ld.l r2, 0, r4 /* r4 = data */
+ movi -(EFAULT), r2 /* r2 = reply, no real fixup */
+
+___put_user_asm_l1:
+ st.l r3, 0, r4
+ or ZERO, ZERO, r2
+
+___put_user_asm_l_exit:
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+
+ .global __put_user_asm_q
+__put_user_asm_q:
+ ld.q r2, 0, r4 /* r4 = data */
+ movi -(EFAULT), r2 /* r2 = reply, no real fixup */
+
+___put_user_asm_q1:
+ st.q r3, 0, r4
+ or ZERO, ZERO, r2
+
+___put_user_asm_q_exit:
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
+panic_stash_regs:
+ /* The idea is : when we get an unhandled panic, we dump the registers
+ to a known memory location, the just sit in a tight loop.
+ This allows the human to look at the memory region through the GDB
+ session (assuming the debug module's SHwy initiator isn't locked up
+ or anything), to hopefully analyze the cause of the panic. */
+
+ /* On entry, former r15 (SP) is in DCR
+ former r0 is at resvec_saved_area + 0
+ former r1 is at resvec_saved_area + 8
+ former tr0 is at resvec_saved_area + 32
+ DCR is the only register whose value is lost altogether.
+ */
+
+ movi 0xffffffff80000000, r0 ! phy of dump area
+ ld.q SP, 0x000, r1 ! former r0
+ st.q r0, 0x000, r1
+ ld.q SP, 0x008, r1 ! former r1
+ st.q r0, 0x008, r1
+ st.q r0, 0x010, r2
+ st.q r0, 0x018, r3
+ st.q r0, 0x020, r4
+ st.q r0, 0x028, r5
+ st.q r0, 0x030, r6
+ st.q r0, 0x038, r7
+ st.q r0, 0x040, r8
+ st.q r0, 0x048, r9
+ st.q r0, 0x050, r10
+ st.q r0, 0x058, r11
+ st.q r0, 0x060, r12
+ st.q r0, 0x068, r13
+ st.q r0, 0x070, r14
+ getcon dcr, r14
+ st.q r0, 0x078, r14
+ st.q r0, 0x080, r16
+ st.q r0, 0x088, r17
+ st.q r0, 0x090, r18
+ st.q r0, 0x098, r19
+ st.q r0, 0x0a0, r20
+ st.q r0, 0x0a8, r21
+ st.q r0, 0x0b0, r22
+ st.q r0, 0x0b8, r23
+ st.q r0, 0x0c0, r24
+ st.q r0, 0x0c8, r25
+ st.q r0, 0x0d0, r26
+ st.q r0, 0x0d8, r27
+ st.q r0, 0x0e0, r28
+ st.q r0, 0x0e8, r29
+ st.q r0, 0x0f0, r30
+ st.q r0, 0x0f8, r31
+ st.q r0, 0x100, r32
+ st.q r0, 0x108, r33
+ st.q r0, 0x110, r34
+ st.q r0, 0x118, r35
+ st.q r0, 0x120, r36
+ st.q r0, 0x128, r37
+ st.q r0, 0x130, r38
+ st.q r0, 0x138, r39
+ st.q r0, 0x140, r40
+ st.q r0, 0x148, r41
+ st.q r0, 0x150, r42
+ st.q r0, 0x158, r43
+ st.q r0, 0x160, r44
+ st.q r0, 0x168, r45
+ st.q r0, 0x170, r46
+ st.q r0, 0x178, r47
+ st.q r0, 0x180, r48
+ st.q r0, 0x188, r49
+ st.q r0, 0x190, r50
+ st.q r0, 0x198, r51
+ st.q r0, 0x1a0, r52
+ st.q r0, 0x1a8, r53
+ st.q r0, 0x1b0, r54
+ st.q r0, 0x1b8, r55
+ st.q r0, 0x1c0, r56
+ st.q r0, 0x1c8, r57
+ st.q r0, 0x1d0, r58
+ st.q r0, 0x1d8, r59
+ st.q r0, 0x1e0, r60
+ st.q r0, 0x1e8, r61
+ st.q r0, 0x1f0, r62
+ st.q r0, 0x1f8, r63 ! bogus, but for consistency's sake...
+
+ ld.q SP, 0x020, r1 ! former tr0
+ st.q r0, 0x200, r1
+ gettr tr1, r1
+ st.q r0, 0x208, r1
+ gettr tr2, r1
+ st.q r0, 0x210, r1
+ gettr tr3, r1
+ st.q r0, 0x218, r1
+ gettr tr4, r1
+ st.q r0, 0x220, r1
+ gettr tr5, r1
+ st.q r0, 0x228, r1
+ gettr tr6, r1
+ st.q r0, 0x230, r1
+ gettr tr7, r1
+ st.q r0, 0x238, r1
+
+ getcon sr, r1
+ getcon ssr, r2
+ getcon pssr, r3
+ getcon spc, r4
+ getcon pspc, r5
+ getcon intevt, r6
+ getcon expevt, r7
+ getcon pexpevt, r8
+ getcon tra, r9
+ getcon tea, r10
+ getcon kcr0, r11
+ getcon kcr1, r12
+ getcon vbr, r13
+ getcon resvec, r14
+
+ st.q r0, 0x240, r1
+ st.q r0, 0x248, r2
+ st.q r0, 0x250, r3
+ st.q r0, 0x258, r4
+ st.q r0, 0x260, r5
+ st.q r0, 0x268, r6
+ st.q r0, 0x270, r7
+ st.q r0, 0x278, r8
+ st.q r0, 0x280, r9
+ st.q r0, 0x288, r10
+ st.q r0, 0x290, r11
+ st.q r0, 0x298, r12
+ st.q r0, 0x2a0, r13
+ st.q r0, 0x2a8, r14
+
+ getcon SPC,r2
+ getcon SSR,r3
+ getcon EXPEVT,r4
+ /* Prepare to jump to C - physical address */
+ movi panic_handler-CONFIG_CACHED_MEMORY_OFFSET, r1
+ ori r1, 1, r1
+ ptabs r1, tr0
+ getcon DCR, SP
+ blink tr0, ZERO
+ nop
+ nop
+ nop
+ nop
+
+
+
+
+/*
+ * --- Signal Handling Section
+ */
+
+/*
+ * extern long long _sa_default_rt_restorer
+ * extern long long _sa_default_restorer
+ *
+ * or, better,
+ *
+ * extern void _sa_default_rt_restorer(void)
+ * extern void _sa_default_restorer(void)
+ *
+ * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn()
+ * from user space. Copied into user space by signal management.
+ * Both must be quad aligned and 2 quad long (4 instructions).
+ *
+ */
+ .balign 8
+ .global sa_default_rt_restorer
+sa_default_rt_restorer:
+ movi 0x10, r9
+ shori __NR_rt_sigreturn, r9
+ trapa r9
+ nop
+
+ .balign 8
+ .global sa_default_restorer
+sa_default_restorer:
+ movi 0x10, r9
+ shori __NR_sigreturn, r9
+ trapa r9
+ nop
+
+/*
+ * --- __ex_table Section
+ */
+
+/*
+ * User Access Exception Table.
+ */
+ .section __ex_table, "a"
+
+ .global asm_uaccess_start /* Just a marker */
+asm_uaccess_start:
+
+ .long ___copy_user1, ___copy_user_exit
+ .long ___copy_user2, ___copy_user_exit
+ .long ___clear_user1, ___clear_user_exit
+ .long ___strncpy_from_user1, ___strncpy_from_user_exit
+ .long ___strnlen_user1, ___strnlen_user_exit
+ .long ___get_user_asm_b1, ___get_user_asm_b_exit
+ .long ___get_user_asm_w1, ___get_user_asm_w_exit
+ .long ___get_user_asm_l1, ___get_user_asm_l_exit
+ .long ___get_user_asm_q1, ___get_user_asm_q_exit
+ .long ___put_user_asm_b1, ___put_user_asm_b_exit
+ .long ___put_user_asm_w1, ___put_user_asm_w_exit
+ .long ___put_user_asm_l1, ___put_user_asm_l_exit
+ .long ___put_user_asm_q1, ___put_user_asm_q_exit
+
+ .global asm_uaccess_end /* Just a marker */
+asm_uaccess_end:
+
+
+
+
+/*
+ * --- .text.init Section
+ */
+
+ .section .text.init, "ax"
+
+/*
+ * void trap_init (void)
+ *
+ */
+ .global trap_init
+trap_init:
+ addi SP, -24, SP /* Room to save r28/r29/r30 */
+ st.q SP, 0, r28
+ st.q SP, 8, r29
+ st.q SP, 16, r30
+
+ /* Set VBR and RESVEC */
+ movi LVBR_block, r19
+ andi r19, -4, r19 /* reset MMUOFF + reserved */
+ /* For RESVEC exceptions we force the MMU off, which means we need the
+ physical address. */
+ movi LRESVEC_block-CONFIG_CACHED_MEMORY_OFFSET, r20
+ andi r20, -4, r20 /* reset reserved */
+ ori r20, 1, r20 /* set MMUOFF */
+ putcon r19, VBR
+ putcon r20, RESVEC
+
+ /* Sanity check */
+ movi LVBR_block_end, r21
+ andi r21, -4, r21
+ movi BLOCK_SIZE, r29 /* r29 = expected size */
+ or r19, ZERO, r30
+ add r19, r29, r19
+
+ /*
+ * Ugly, but better loop forever now than crash afterwards.
+ * We should print a message, but if we touch LVBR or
+ * LRESVEC blocks we should not be surprised if we get stuck
+ * in trap_init().
+ */
+ pta trap_init_loop, tr1
+ gettr tr1, r28 /* r28 = trap_init_loop */
+ sub r21, r30, r30 /* r30 = actual size */
+
+ /*
+ * VBR/RESVEC handlers overlap by being bigger than
+ * allowed. Very bad. Just loop forever.
+ * (r28) panic/loop address
+ * (r29) expected size
+ * (r30) actual size
+ */
+trap_init_loop:
+ bne r19, r21, tr1
+
+ /* Now that exception vectors are set up reset SR.BL */
+ getcon SR, r22
+ movi SR_UNBLOCK_EXC, r23
+ and r22, r23, r22
+ putcon r22, SR
+
+ addi SP, 24, SP
+ ptabs LINK, tr0
+ blink tr0, ZERO
+
diff --git a/arch/sh64/kernel/fpu.c b/arch/sh64/kernel/fpu.c
new file mode 100644
index 000000000000..8ad4ed6a6c9b
--- /dev/null
+++ b/arch/sh64/kernel/fpu.c
@@ -0,0 +1,170 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/fpu.c
+ *
+ * Copyright (C) 2001 Manuela Cirronis, Paolo Alberelli
+ * Copyright (C) 2002 STMicroelectronics Limited
+ * Author : Stuart Menefy
+ *
+ * Started from SH4 version:
+ * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <asm/processor.h>
+#include <asm/user.h>
+#include <asm/io.h>
+
+/*
+ * Initially load the FPU with signalling NANS. This bit pattern
+ * has the property that no matter whether considered as single or as
+ * double precision, it still represents a signalling NAN.
+ */
+#define sNAN64 0xFFFFFFFFFFFFFFFFULL
+#define sNAN32 0xFFFFFFFFUL
+
+static union sh_fpu_union init_fpuregs = {
+ .hard = {
+ .fp_regs = { [0 ... 63] = sNAN32 },
+ .fpscr = FPSCR_INIT
+ }
+};
+
+inline void fpsave(struct sh_fpu_hard_struct *fpregs)
+{
+ asm volatile("fst.p %0, (0*8), fp0\n\t"
+ "fst.p %0, (1*8), fp2\n\t"
+ "fst.p %0, (2*8), fp4\n\t"
+ "fst.p %0, (3*8), fp6\n\t"
+ "fst.p %0, (4*8), fp8\n\t"
+ "fst.p %0, (5*8), fp10\n\t"
+ "fst.p %0, (6*8), fp12\n\t"
+ "fst.p %0, (7*8), fp14\n\t"
+ "fst.p %0, (8*8), fp16\n\t"
+ "fst.p %0, (9*8), fp18\n\t"
+ "fst.p %0, (10*8), fp20\n\t"
+ "fst.p %0, (11*8), fp22\n\t"
+ "fst.p %0, (12*8), fp24\n\t"
+ "fst.p %0, (13*8), fp26\n\t"
+ "fst.p %0, (14*8), fp28\n\t"
+ "fst.p %0, (15*8), fp30\n\t"
+ "fst.p %0, (16*8), fp32\n\t"
+ "fst.p %0, (17*8), fp34\n\t"
+ "fst.p %0, (18*8), fp36\n\t"
+ "fst.p %0, (19*8), fp38\n\t"
+ "fst.p %0, (20*8), fp40\n\t"
+ "fst.p %0, (21*8), fp42\n\t"
+ "fst.p %0, (22*8), fp44\n\t"
+ "fst.p %0, (23*8), fp46\n\t"
+ "fst.p %0, (24*8), fp48\n\t"
+ "fst.p %0, (25*8), fp50\n\t"
+ "fst.p %0, (26*8), fp52\n\t"
+ "fst.p %0, (27*8), fp54\n\t"
+ "fst.p %0, (28*8), fp56\n\t"
+ "fst.p %0, (29*8), fp58\n\t"
+ "fst.p %0, (30*8), fp60\n\t"
+ "fst.p %0, (31*8), fp62\n\t"
+
+ "fgetscr fr63\n\t"
+ "fst.s %0, (32*8), fr63\n\t"
+ : /* no output */
+ : "r" (fpregs)
+ : "memory");
+}
+
+
+static inline void
+fpload(struct sh_fpu_hard_struct *fpregs)
+{
+ asm volatile("fld.p %0, (0*8), fp0\n\t"
+ "fld.p %0, (1*8), fp2\n\t"
+ "fld.p %0, (2*8), fp4\n\t"
+ "fld.p %0, (3*8), fp6\n\t"
+ "fld.p %0, (4*8), fp8\n\t"
+ "fld.p %0, (5*8), fp10\n\t"
+ "fld.p %0, (6*8), fp12\n\t"
+ "fld.p %0, (7*8), fp14\n\t"
+ "fld.p %0, (8*8), fp16\n\t"
+ "fld.p %0, (9*8), fp18\n\t"
+ "fld.p %0, (10*8), fp20\n\t"
+ "fld.p %0, (11*8), fp22\n\t"
+ "fld.p %0, (12*8), fp24\n\t"
+ "fld.p %0, (13*8), fp26\n\t"
+ "fld.p %0, (14*8), fp28\n\t"
+ "fld.p %0, (15*8), fp30\n\t"
+ "fld.p %0, (16*8), fp32\n\t"
+ "fld.p %0, (17*8), fp34\n\t"
+ "fld.p %0, (18*8), fp36\n\t"
+ "fld.p %0, (19*8), fp38\n\t"
+ "fld.p %0, (20*8), fp40\n\t"
+ "fld.p %0, (21*8), fp42\n\t"
+ "fld.p %0, (22*8), fp44\n\t"
+ "fld.p %0, (23*8), fp46\n\t"
+ "fld.p %0, (24*8), fp48\n\t"
+ "fld.p %0, (25*8), fp50\n\t"
+ "fld.p %0, (26*8), fp52\n\t"
+ "fld.p %0, (27*8), fp54\n\t"
+ "fld.p %0, (28*8), fp56\n\t"
+ "fld.p %0, (29*8), fp58\n\t"
+ "fld.p %0, (30*8), fp60\n\t"
+
+ "fld.s %0, (32*8), fr63\n\t"
+ "fputscr fr63\n\t"
+
+ "fld.p %0, (31*8), fp62\n\t"
+ : /* no output */
+ : "r" (fpregs) );
+}
+
+void fpinit(struct sh_fpu_hard_struct *fpregs)
+{
+ *fpregs = init_fpuregs.hard;
+}
+
+asmlinkage void
+do_fpu_error(unsigned long ex, struct pt_regs *regs)
+{
+ struct task_struct *tsk = current;
+
+ regs->pc += 4;
+
+ tsk->thread.trap_no = 11;
+ tsk->thread.error_code = 0;
+ force_sig(SIGFPE, tsk);
+}
+
+
+asmlinkage void
+do_fpu_state_restore(unsigned long ex, struct pt_regs *regs)
+{
+ void die(const char *str, struct pt_regs *regs, long err);
+
+ if (! user_mode(regs))
+ die("FPU used in kernel", regs, ex);
+
+ regs->sr &= ~SR_FD;
+
+ if (last_task_used_math == current)
+ return;
+
+ grab_fpu();
+ if (last_task_used_math != NULL) {
+ /* Other processes fpu state, save away */
+ fpsave(&last_task_used_math->thread.fpu.hard);
+ }
+ last_task_used_math = current;
+ if (used_math()) {
+ fpload(&current->thread.fpu.hard);
+ } else {
+ /* First time FPU user. */
+ fpload(&init_fpuregs.hard);
+ set_used_math();
+ }
+ release_fpu();
+}
+
diff --git a/arch/sh64/kernel/head.S b/arch/sh64/kernel/head.S
new file mode 100644
index 000000000000..cc0b628a9ea7
--- /dev/null
+++ b/arch/sh64/kernel/head.S
@@ -0,0 +1,373 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/head.S
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003, 2004 Paul Mundt
+ *
+ *
+ * benedict.gaster@superh.com: 2nd May 2002
+ * Moved definition of empty_zero_page to its own section allowing
+ * it to be placed at an absolute address known at load time.
+ *
+ * lethal@linux-sh.org: 9th May 2003
+ * Kill off GLOBAL_NAME() usage.
+ *
+ * lethal@linux-sh.org: 8th May 2004
+ * Add early SCIF console DTLB mapping.
+ */
+
+#include <linux/config.h>
+
+#include <asm/page.h>
+#include <asm/mmu_context.h>
+#include <asm/cache.h>
+#include <asm/tlb.h>
+#include <asm/processor.h>
+#include <asm/registers.h>
+#include <asm/thread_info.h>
+
+/*
+ * MMU defines: TLB boundaries.
+ */
+
+#define MMUIR_FIRST ITLB_FIXED
+#define MMUIR_END ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP
+#define MMUIR_STEP TLB_STEP
+
+#define MMUDR_FIRST DTLB_FIXED
+#define MMUDR_END DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP
+#define MMUDR_STEP TLB_STEP
+
+/* Safety check : CONFIG_CACHED_MEMORY_OFFSET has to be a multiple of 512Mb */
+#if (CONFIG_CACHED_MEMORY_OFFSET & ((1UL<<29)-1))
+#error "CONFIG_CACHED_MEMORY_OFFSET must be a multiple of 512Mb"
+#endif
+
+/*
+ * MMU defines: Fixed TLBs.
+ */
+/* Deal safely with the case where the base of RAM is not 512Mb aligned */
+
+#define ALIGN_512M_MASK (0xffffffffe0000000)
+#define ALIGNED_EFFECTIVE ((CONFIG_CACHED_MEMORY_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK)
+#define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK)
+
+#define MMUIR_TEXT_H (0x0000000000000003 | ALIGNED_EFFECTIVE)
+ /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
+
+#define MMUIR_TEXT_L (0x000000000000009a | ALIGNED_PHYSICAL)
+ /* 512 Mb, Cacheable, Write-back, execute, Not User, Ph. Add. */
+
+#define MMUDR_CACHED_H 0x0000000000000003 | ALIGNED_EFFECTIVE
+ /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
+#define MMUDR_CACHED_L 0x000000000000015a | ALIGNED_PHYSICAL
+ /* 512 Mb, Cacheable, Write-back, read/write, Not User, Ph. Add. */
+
+#ifdef CONFIG_ICACHE_DISABLED
+#define ICCR0_INIT_VAL ICCR0_OFF /* ICACHE off */
+#else
+#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */
+#endif
+#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */
+
+#if defined (CONFIG_DCACHE_DISABLED)
+#define OCCR0_INIT_VAL OCCR0_OFF /* D-cache: off */
+#elif defined (CONFIG_DCACHE_WRITE_THROUGH)
+#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WT /* D-cache: on, */
+ /* WT, invalidate */
+#elif defined (CONFIG_DCACHE_WRITE_BACK)
+#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* D-cache: on, */
+ /* WB, invalidate */
+#else
+#error preprocessor flag CONFIG_DCACHE_... not recognized!
+#endif
+
+#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */
+
+ .section .empty_zero_page, "aw"
+ .global empty_zero_page
+
+empty_zero_page:
+ .long 1 /* MOUNT_ROOT_RDONLY */
+ .long 0 /* RAMDISK_FLAGS */
+ .long 0x0200 /* ORIG_ROOT_DEV */
+ .long 1 /* LOADER_TYPE */
+ .long 0x00800000 /* INITRD_START */
+ .long 0x00800000 /* INITRD_SIZE */
+ .long 0
+
+ .text
+ .balign 4096,0,4096
+
+ .section .data, "aw"
+ .balign PAGE_SIZE
+
+ .section .data, "aw"
+ .balign PAGE_SIZE
+
+ .global swapper_pg_dir
+swapper_pg_dir:
+ .space PAGE_SIZE, 0
+
+ .global empty_bad_page
+empty_bad_page:
+ .space PAGE_SIZE, 0
+
+ .global empty_bad_pte_table
+empty_bad_pte_table:
+ .space PAGE_SIZE, 0
+
+ .global fpu_in_use
+fpu_in_use: .quad 0
+
+
+ .section .text, "ax"
+ .balign L1_CACHE_BYTES
+/*
+ * Condition at the entry of __stext:
+ * . Reset state:
+ * . SR.FD = 1 (FPU disabled)
+ * . SR.BL = 1 (Exceptions disabled)
+ * . SR.MD = 1 (Privileged Mode)
+ * . SR.MMU = 0 (MMU Disabled)
+ * . SR.CD = 0 (CTC User Visible)
+ * . SR.IMASK = Undefined (Interrupt Mask)
+ *
+ * Operations supposed to be performed by __stext:
+ * . prevent speculative fetch onto device memory while MMU is off
+ * . reflect as much as possible SH5 ABI (r15, r26, r27, r18)
+ * . first, save CPU state and set it to something harmless
+ * . any CPU detection and/or endianness settings (?)
+ * . initialize EMI/LMI (but not TMU/RTC/INTC/SCIF): TBD
+ * . set initial TLB entries for cached and uncached regions
+ * (no fine granularity paging)
+ * . set initial cache state
+ * . enable MMU and caches
+ * . set CPU to a consistent state
+ * . registers (including stack pointer and current/KCR0)
+ * . NOT expecting to set Exception handling nor VBR/RESVEC/DCR
+ * at this stage. This is all to later Linux initialization steps.
+ * . initialize FPU
+ * . clear BSS
+ * . jump into start_kernel()
+ * . be prepared to hopeless start_kernel() returns.
+ *
+ */
+ .global _stext
+_stext:
+ /*
+ * Prevent speculative fetch on device memory due to
+ * uninitialized target registers.
+ */
+ ptabs/u ZERO, tr0
+ ptabs/u ZERO, tr1
+ ptabs/u ZERO, tr2
+ ptabs/u ZERO, tr3
+ ptabs/u ZERO, tr4
+ ptabs/u ZERO, tr5
+ ptabs/u ZERO, tr6
+ ptabs/u ZERO, tr7
+ synci
+
+ /*
+ * Read/Set CPU state. After this block:
+ * r29 = Initial SR
+ */
+ getcon SR, r29
+ movi SR_HARMLESS, r20
+ putcon r20, SR
+
+ /*
+ * Initialize EMI/LMI. To Be Done.
+ */
+
+ /*
+ * CPU detection and/or endianness settings (?). To Be Done.
+ * Pure PIC code here, please ! Just save state into r30.
+ * After this block:
+ * r30 = CPU type/Platform Endianness
+ */
+
+ /*
+ * Set initial TLB entries for cached and uncached regions.
+ * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
+ */
+ /* Clear ITLBs */
+ pta clear_ITLB, tr1
+ movi MMUIR_FIRST, r21
+ movi MMUIR_END, r22
+clear_ITLB:
+ putcfg r21, 0, ZERO /* Clear MMUIR[n].PTEH.V */
+ addi r21, MMUIR_STEP, r21
+ bne r21, r22, tr1
+
+ /* Clear DTLBs */
+ pta clear_DTLB, tr1
+ movi MMUDR_FIRST, r21
+ movi MMUDR_END, r22
+clear_DTLB:
+ putcfg r21, 0, ZERO /* Clear MMUDR[n].PTEH.V */
+ addi r21, MMUDR_STEP, r21
+ bne r21, r22, tr1
+
+ /* Map one big (512Mb) page for ITLB */
+ movi MMUIR_FIRST, r21
+ movi MMUIR_TEXT_L, r22 /* PTEL first */
+ add.l r22, r63, r22 /* Sign extend */
+ putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */
+ movi MMUIR_TEXT_H, r22 /* PTEH last */
+ add.l r22, r63, r22 /* Sign extend */
+ putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */
+
+ /* Map one big CACHED (512Mb) page for DTLB */
+ movi MMUDR_FIRST, r21
+ movi MMUDR_CACHED_L, r22 /* PTEL first */
+ add.l r22, r63, r22 /* Sign extend */
+ putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */
+ movi MMUDR_CACHED_H, r22 /* PTEH last */
+ add.l r22, r63, r22 /* Sign extend */
+ putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */
+
+#ifdef CONFIG_EARLY_PRINTK
+ /*
+ * Setup a DTLB translation for SCIF phys.
+ */
+ addi r21, MMUDR_STEP, r21
+ movi 0x0a03, r22 /* SCIF phys */
+ shori 0x0148, r22
+ putcfg r21, 1, r22 /* PTEL first */
+ movi 0xfa03, r22 /* 0xfa030000, fixed SCIF virt */
+ shori 0x0003, r22
+ putcfg r21, 0, r22 /* PTEH last */
+#endif
+
+ /*
+ * Set cache behaviours.
+ */
+ /* ICache */
+ movi ICCR_BASE, r21
+ movi ICCR0_INIT_VAL, r22
+ movi ICCR1_INIT_VAL, r23
+ putcfg r21, ICCR_REG0, r22
+ putcfg r21, ICCR_REG1, r23
+
+ /* OCache */
+ movi OCCR_BASE, r21
+ movi OCCR0_INIT_VAL, r22
+ movi OCCR1_INIT_VAL, r23
+ putcfg r21, OCCR_REG0, r22
+ putcfg r21, OCCR_REG1, r23
+
+
+ /*
+ * Enable Caches and MMU. Do the first non-PIC jump.
+ * Now head.S global variables, constants and externs
+ * can be used.
+ */
+ getcon SR, r21
+ movi SR_ENABLE_MMU, r22
+ or r21, r22, r21
+ putcon r21, SSR
+ movi hyperspace, r22
+ ori r22, 1, r22 /* Make it SHmedia, not required but..*/
+ putcon r22, SPC
+ synco
+ rte /* And now go into the hyperspace ... */
+hyperspace: /* ... that's the next instruction ! */
+
+ /*
+ * Set CPU to a consistent state.
+ * r31 = FPU support flag
+ * tr0/tr7 in use. Others give a chance to loop somewhere safe
+ */
+ movi start_kernel, r32
+ ori r32, 1, r32
+
+ ptabs r32, tr0 /* r32 = _start_kernel address */
+ pta/u hopeless, tr1
+ pta/u hopeless, tr2
+ pta/u hopeless, tr3
+ pta/u hopeless, tr4
+ pta/u hopeless, tr5
+ pta/u hopeless, tr6
+ pta/u hopeless, tr7
+ gettr tr1, r28 /* r28 = hopeless address */
+
+ /* Set initial stack pointer */
+ movi init_thread_union, SP
+ putcon SP, KCR0 /* Set current to init_task */
+ movi THREAD_SIZE, r22 /* Point to the end */
+ add SP, r22, SP
+
+ /*
+ * Initialize FPU.
+ * Keep FPU flag in r31. After this block:
+ * r31 = FPU flag
+ */
+ movi fpu_in_use, r31 /* Temporary */
+
+#ifdef CONFIG_SH_FPU
+ getcon SR, r21
+ movi SR_ENABLE_FPU, r22
+ and r21, r22, r22
+ putcon r22, SR /* Try to enable */
+ getcon SR, r22
+ xor r21, r22, r21
+ shlri r21, 15, r21 /* Supposedly 0/1 */
+ st.q r31, 0 , r21 /* Set fpu_in_use */
+#else
+ movi 0, r21
+ st.q r31, 0 , r21 /* Set fpu_in_use */
+#endif
+ or r21, ZERO, r31 /* Set FPU flag at last */
+
+#ifndef CONFIG_SH_NO_BSS_INIT
+/* Don't clear BSS if running on slow platforms such as an RTL simulation,
+ remote memory via SHdebug link, etc. For these the memory can be guaranteed
+ to be all zero on boot anyway. */
+ /*
+ * Clear bss
+ */
+ pta clear_quad, tr1
+ movi __bss_start, r22
+ movi _end, r23
+clear_quad:
+ st.q r22, 0, ZERO
+ addi r22, 8, r22
+ bne r22, r23, tr1 /* Both quad aligned, see vmlinux.lds.S */
+#endif
+ pta/u hopeless, tr1
+
+ /* Say bye to head.S but be prepared to wrongly get back ... */
+ blink tr0, LINK
+
+ /* If we ever get back here through LINK/tr1-tr7 */
+ pta/u hopeless, tr7
+
+hopeless:
+ /*
+ * Something's badly wrong here. Loop endlessly,
+ * there's nothing more we can do about it.
+ *
+ * Note on hopeless: it can be jumped into invariably
+ * before or after jumping into hyperspace. The only
+ * requirement is to be PIC called (PTA) before and
+ * any way (PTA/PTABS) after. According to Virtual
+ * to Physical mapping a simulator/emulator can easily
+ * tell where we came here from just looking at hopeless
+ * (PC) address.
+ *
+ * For debugging purposes:
+ * (r28) hopeless/loop address
+ * (r29) Original SR
+ * (r30) CPU type/Platform endianness
+ * (r31) FPU Support
+ * (r32) _start_kernel address
+ */
+ blink tr7, ZERO
+
+
diff --git a/arch/sh64/kernel/init_task.c b/arch/sh64/kernel/init_task.c
new file mode 100644
index 000000000000..de2d07db1f88
--- /dev/null
+++ b/arch/sh64/kernel/init_task.c
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/init_task.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 Paul Mundt
+ *
+ */
+#include <linux/rwsem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+
+struct pt_regs fake_swapper_regs;
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE-byte aligned due
+ * to the way process stacks are handled. This is done by having a
+ * special "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+ { INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+
diff --git a/arch/sh64/kernel/irq.c b/arch/sh64/kernel/irq.c
new file mode 100644
index 000000000000..9fc2b71dbd84
--- /dev/null
+++ b/arch/sh64/kernel/irq.c
@@ -0,0 +1,116 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/irq.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 Paul Mundt
+ *
+ */
+
+/*
+ * IRQs are in fact implemented a bit like signal handlers for the kernel.
+ * Naturally it's not a 1:1 relation, but there are similarities.
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/bitops.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <linux/irq.h>
+
+void ack_bad_irq(unsigned int irq)
+{
+ printk("unexpected IRQ trap at irq %02x\n", irq);
+}
+
+#if defined(CONFIG_PROC_FS)
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, j;
+ struct irqaction * action;
+ unsigned long flags;
+
+ if (i == 0) {
+ seq_puts(p, " ");
+ for (j=0; j<NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "CPU%d ",j);
+ seq_putc(p, '\n');
+ }
+
+ if (i < NR_IRQS) {
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
+ if (!action)
+ goto unlock;
+ seq_printf(p, "%3d: ",i);
+ seq_printf(p, "%10u ", kstat_irqs(i));
+ seq_printf(p, " %14s", irq_desc[i].handler->typename);
+ seq_printf(p, " %s", action->name);
+
+ for (action=action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+ seq_putc(p, '\n');
+unlock:
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ }
+ return 0;
+}
+#endif
+
+/*
+ * do_NMI handles all Non-Maskable Interrupts.
+ */
+asmlinkage void do_NMI(unsigned long vector_num, struct pt_regs * regs)
+{
+ if (regs->sr & 0x40000000)
+ printk("unexpected NMI trap in system mode\n");
+ else
+ printk("unexpected NMI trap in user mode\n");
+
+ /* No statistics */
+}
+
+/*
+ * do_IRQ handles all normal device IRQ's.
+ */
+asmlinkage int do_IRQ(unsigned long vector_num, struct pt_regs * regs)
+{
+ int irq;
+
+ irq_enter();
+
+ irq = irq_demux(vector_num);
+
+ if (irq >= 0) {
+ __do_IRQ(irq, regs);
+ } else {
+ printk("unexpected IRQ trap at vector %03lx\n", vector_num);
+ }
+
+ irq_exit();
+
+ return 1;
+}
+
diff --git a/arch/sh64/kernel/irq_intc.c b/arch/sh64/kernel/irq_intc.c
new file mode 100644
index 000000000000..43f88f3a78b0
--- /dev/null
+++ b/arch/sh64/kernel/irq_intc.c
@@ -0,0 +1,272 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/irq_intc.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * Interrupt Controller support for SH5 INTC.
+ * Per-interrupt selective. IRLM=0 (Fixed priority) is not
+ * supported being useless without a cascaded interrupt
+ * controller.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/bitops.h> /* this includes also <asm/registers.h */
+ /* which is required to remap register */
+ /* names used into __asm__ blocks... */
+
+#include <asm/hardware.h>
+#include <asm/platform.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/*
+ * Maybe the generic Peripheral block could move to a more
+ * generic include file. INTC Block will be defined here
+ * and only here to make INTC self-contained in a single
+ * file.
+ */
+#define INTC_BLOCK_OFFSET 0x01000000
+
+/* Base */
+#define INTC_BASE PHYS_PERIPHERAL_BLOCK + \
+ INTC_BLOCK_OFFSET
+
+/* Address */
+#define INTC_ICR_SET (intc_virt + 0x0)
+#define INTC_ICR_CLEAR (intc_virt + 0x8)
+#define INTC_INTPRI_0 (intc_virt + 0x10)
+#define INTC_INTSRC_0 (intc_virt + 0x50)
+#define INTC_INTSRC_1 (intc_virt + 0x58)
+#define INTC_INTREQ_0 (intc_virt + 0x60)
+#define INTC_INTREQ_1 (intc_virt + 0x68)
+#define INTC_INTENB_0 (intc_virt + 0x70)
+#define INTC_INTENB_1 (intc_virt + 0x78)
+#define INTC_INTDSB_0 (intc_virt + 0x80)
+#define INTC_INTDSB_1 (intc_virt + 0x88)
+
+#define INTC_ICR_IRLM 0x1
+#define INTC_INTPRI_PREGS 8 /* 8 Priority Registers */
+#define INTC_INTPRI_PPREG 8 /* 8 Priorities per Register */
+
+
+/*
+ * Mapper between the vector ordinal and the IRQ number
+ * passed to kernel/device drivers.
+ */
+int intc_evt_to_irq[(0xE20/0x20)+1] = {
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */
+ 0, 0, 0, 0, 0, 1, 0, 0, /* 0x200 - 0x2E0 */
+ 2, 0, 0, 3, 0, 0, 0, -1, /* 0x300 - 0x3E0 */
+ 32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */
+ -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */
+ -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */
+ 39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */
+ 4, 5, 6, 7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */
+ 12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */
+ -1, -1 /* 0xE00 - 0xE20 */
+};
+
+/*
+ * Opposite mapper.
+ */
+static int IRQ_to_vectorN[NR_INTC_IRQS] = {
+ 0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /* 0- 7 */
+ -1, -1, -1, -1, 0x50, 0x51, 0x52, 0x53, /* 8-15 */
+ 0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36, -1, /* 16-23 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 24-31 */
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */
+ 0x39, 0x3A, 0x3B, -1, -1, -1, -1, -1, /* 40-47 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 48-55 */
+ -1, -1, -1, -1, -1, -1, -1, 0x2B, /* 56-63 */
+
+};
+
+static unsigned long intc_virt;
+
+static unsigned int startup_intc_irq(unsigned int irq);
+static void shutdown_intc_irq(unsigned int irq);
+static void enable_intc_irq(unsigned int irq);
+static void disable_intc_irq(unsigned int irq);
+static void mask_and_ack_intc(unsigned int);
+static void end_intc_irq(unsigned int irq);
+
+static struct hw_interrupt_type intc_irq_type = {
+ "INTC",
+ startup_intc_irq,
+ shutdown_intc_irq,
+ enable_intc_irq,
+ disable_intc_irq,
+ mask_and_ack_intc,
+ end_intc_irq
+};
+
+static int irlm; /* IRL mode */
+
+static unsigned int startup_intc_irq(unsigned int irq)
+{
+ enable_intc_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static void shutdown_intc_irq(unsigned int irq)
+{
+ disable_intc_irq(irq);
+}
+
+static void enable_intc_irq(unsigned int irq)
+{
+ unsigned long reg;
+ unsigned long bitmask;
+
+ if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
+ printk("Trying to use straight IRL0-3 with an encoding platform.\n");
+
+ if (irq < 32) {
+ reg = INTC_INTENB_0;
+ bitmask = 1 << irq;
+ } else {
+ reg = INTC_INTENB_1;
+ bitmask = 1 << (irq - 32);
+ }
+
+ ctrl_outl(bitmask, reg);
+}
+
+static void disable_intc_irq(unsigned int irq)
+{
+ unsigned long reg;
+ unsigned long bitmask;
+
+ if (irq < 32) {
+ reg = INTC_INTDSB_0;
+ bitmask = 1 << irq;
+ } else {
+ reg = INTC_INTDSB_1;
+ bitmask = 1 << (irq - 32);
+ }
+
+ ctrl_outl(bitmask, reg);
+}
+
+static void mask_and_ack_intc(unsigned int irq)
+{
+ disable_intc_irq(irq);
+}
+
+static void end_intc_irq(unsigned int irq)
+{
+ enable_intc_irq(irq);
+}
+
+/* For future use, if we ever support IRLM=0) */
+void make_intc_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ irq_desc[irq].handler = &intc_irq_type;
+ disable_intc_irq(irq);
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int intc_irq_describe(char* p, int irq)
+{
+ if (irq < NR_INTC_IRQS)
+ return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20);
+ else
+ return 0;
+}
+#endif
+
+void __init init_IRQ(void)
+{
+ unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
+ unsigned long reg;
+ unsigned long data;
+ int i;
+
+ intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
+ if (!intc_virt) {
+ panic("Unable to remap INTC\n");
+ }
+
+
+ /* Set default: per-line enable/disable, priority driven ack/eoi */
+ for (i = 0; i < NR_INTC_IRQS; i++) {
+ if (platform_int_priority[i] != NO_PRIORITY) {
+ irq_desc[i].handler = &intc_irq_type;
+ }
+ }
+
+
+ /* Disable all interrupts and set all priorities to 0 to avoid trouble */
+ ctrl_outl(-1, INTC_INTDSB_0);
+ ctrl_outl(-1, INTC_INTDSB_1);
+
+ for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
+ ctrl_outl( NO_PRIORITY, reg);
+
+
+ /* Set IRLM */
+ /* If all the priorities are set to 'no priority', then
+ * assume we are using encoded mode.
+ */
+ irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \
+ platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3];
+
+ if (irlm == NO_PRIORITY) {
+ /* IRLM = 0 */
+ reg = INTC_ICR_CLEAR;
+ i = IRQ_INTA;
+ printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
+ } else {
+ /* IRLM = 1 */
+ reg = INTC_ICR_SET;
+ i = IRQ_IRL0;
+ }
+ ctrl_outl(INTC_ICR_IRLM, reg);
+
+ /* Set interrupt priorities according to platform description */
+ for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
+ data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4);
+ if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
+ /* Upon the 7th, set Priority Register */
+ ctrl_outl(data, reg);
+ data = 0;
+ reg += 8;
+ }
+ }
+
+#ifdef CONFIG_SH_CAYMAN
+ {
+ extern void init_cayman_irq(void);
+
+ init_cayman_irq();
+ }
+#endif
+
+ /*
+ * And now let interrupts come in.
+ * sti() is not enough, we need to
+ * lower priority, too.
+ */
+ __asm__ __volatile__("getcon " __SR ", %0\n\t"
+ "and %0, %1, %0\n\t"
+ "putcon %0, " __SR "\n\t"
+ : "=&r" (__dummy0)
+ : "r" (__dummy1));
+}
diff --git a/arch/sh64/kernel/led.c b/arch/sh64/kernel/led.c
new file mode 100644
index 000000000000..cf993c4a9fdc
--- /dev/null
+++ b/arch/sh64/kernel/led.c
@@ -0,0 +1,41 @@
+/*
+ * arch/sh64/kernel/led.c
+ *
+ * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Flash the LEDs
+ */
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+
+void mach_led(int pos, int val);
+
+/* acts like an actual heart beat -- ie thump-thump-pause... */
+void heartbeat(void)
+{
+ static unsigned int cnt = 0, period = 0, dist = 0;
+
+ if (cnt == 0 || cnt == dist) {
+ mach_led(-1, 1);
+ } else if (cnt == 7 || cnt == dist + 7) {
+ mach_led(-1, 0);
+ }
+
+ if (++cnt > period) {
+ cnt = 0;
+
+ /*
+ * The hyperbolic function below modifies the heartbeat period
+ * length in dependency of the current (5min) load. It goes
+ * through the points f(0)=126, f(1)=86, f(5)=51, f(inf)->30.
+ */
+ period = ((672 << FSHIFT) / (5 * avenrun[0] +
+ (7 << FSHIFT))) + 30;
+ dist = period / 4;
+ }
+}
+
diff --git a/arch/sh64/kernel/module.c b/arch/sh64/kernel/module.c
new file mode 100644
index 000000000000..2598f6b88b44
--- /dev/null
+++ b/arch/sh64/kernel/module.c
@@ -0,0 +1,161 @@
+/* Kernel module help for sh64.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ Copyright 2004 SuperH (UK) Ltd
+ Author: Richard Curnow
+
+ Based on the sh version, and on code from the sh64-specific parts of
+ modutils, originally written by Richard Curnow and Ben Gaster.
+
+*/
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt...)
+#endif
+
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc(size);
+}
+
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ table entries. */
+}
+
+/* We don't need anything special. */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ Elf32_Addr relocation;
+ uint32_t *location;
+ int align;
+ int is_shmedia;
+
+ DEBUGP("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+ relocation = sym->st_value + rel[i].r_addend;
+ align = (int)location & 3;
+
+ /* For text addresses, bit2 of the st_other field indicates
+ * whether the symbol is SHmedia (1) or SHcompact (0). If
+ * SHmedia, the LSB of the symbol needs to be asserted
+ * for the CPU to be in SHmedia mode when it starts executing
+ * the branch target. */
+ is_shmedia = (sym->st_other & 4) ? 1 : 0;
+ if (is_shmedia) {
+ relocation |= 1;
+ }
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+ case R_SH_DIR32:
+ DEBUGP("R_SH_DIR32 @%08lx = %08lx\n", (unsigned long) location, (unsigned long) relocation);
+ *location += relocation;
+ break;
+ case R_SH_REL32:
+ DEBUGP("R_SH_REL32 @%08lx = %08lx\n", (unsigned long) location, (unsigned long) relocation);
+ relocation -= (Elf32_Addr) location;
+ *location += relocation;
+ break;
+ case R_SH_IMM_LOW16:
+ DEBUGP("R_SH_IMM_LOW16 @%08lx = %08lx\n", (unsigned long) location, (unsigned long) relocation);
+ *location = (*location & ~0x3fffc00) |
+ ((relocation & 0xffff) << 10);
+ break;
+ case R_SH_IMM_MEDLOW16:
+ DEBUGP("R_SH_IMM_MEDLOW16 @%08lx = %08lx\n", (unsigned long) location, (unsigned long) relocation);
+ *location = (*location & ~0x3fffc00) |
+ (((relocation >> 16) & 0xffff) << 10);
+ break;
+ case R_SH_IMM_LOW16_PCREL:
+ DEBUGP("R_SH_IMM_LOW16_PCREL @%08lx = %08lx\n", (unsigned long) location, (unsigned long) relocation);
+ relocation -= (Elf32_Addr) location;
+ *location = (*location & ~0x3fffc00) |
+ ((relocation & 0xffff) << 10);
+ break;
+ case R_SH_IMM_MEDLOW16_PCREL:
+ DEBUGP("R_SH_IMM_MEDLOW16_PCREL @%08lx = %08lx\n", (unsigned long) location, (unsigned long) relocation);
+ relocation -= (Elf32_Addr) location;
+ *location = (*location & ~0x3fffc00) |
+ (((relocation >> 16) & 0xffff) << 10);
+ break;
+ default:
+ printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ printk(KERN_ERR "module %s: REL RELOCATION unsupported\n",
+ me->name);
+ return -ENOEXEC;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
+
diff --git a/arch/sh64/kernel/pci-dma.c b/arch/sh64/kernel/pci-dma.c
new file mode 100644
index 000000000000..a36c3d71a3fe
--- /dev/null
+++ b/arch/sh64/kernel/pci-dma.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2003 Paul Mundt (lethal@linux-sh.org)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Dynamic DMA mapping support.
+ */
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+void *consistent_alloc(struct pci_dev *hwdev, size_t size,
+ dma_addr_t *dma_handle)
+{
+ void *ret;
+ int gfp = GFP_ATOMIC;
+ void *vp;
+
+ if (hwdev == NULL || hwdev->dma_mask != 0xffffffff)
+ gfp |= GFP_DMA;
+
+ ret = (void *)__get_free_pages(gfp, get_order(size));
+
+ /* now call our friend ioremap_nocache to give us an uncached area */
+ vp = ioremap_nocache(virt_to_phys(ret), size);
+
+ if (vp != NULL) {
+ memset(vp, 0, size);
+ *dma_handle = virt_to_bus(ret);
+ dma_cache_wback_inv((unsigned long)ret, size);
+ }
+
+ return vp;
+}
+
+void consistent_free(struct pci_dev *hwdev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ void *alloc;
+
+ alloc = bus_to_virt((unsigned long)dma_handle);
+ free_pages((unsigned long)alloc, get_order(size));
+
+ iounmap(vaddr);
+}
+
diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c
new file mode 100644
index 000000000000..6197879e8578
--- /dev/null
+++ b/arch/sh64/kernel/pci_sh5.c
@@ -0,0 +1,541 @@
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Support functions for the SH5 PCI hardware.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <asm/pci.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include "pci_sh5.h"
+
+static unsigned long pcicr_virt;
+unsigned long pciio_virt;
+
+static void __init pci_fixup_ide_bases(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * PCI IDE controllers use non-standard I/O port decoding, respect it.
+ */
+ if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ printk("PCI: IDE base address fixup for %s\n", pci_name(d));
+ for(i=0; i<4; i++) {
+ struct resource *r = &d->resource[i];
+ if ((r->start & ~0x80) == 0x374) {
+ r->start |= 2;
+ r->end = r->start;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+char * __init pcibios_setup(char *str)
+{
+ return str;
+}
+
+/* Rounds a number UP to the nearest power of two. Used for
+ * sizing the PCI window.
+ */
+static u32 __init r2p2(u32 num)
+{
+ int i = 31;
+ u32 tmp = num;
+
+ if (num == 0)
+ return 0;
+
+ do {
+ if (tmp & (1 << 31))
+ break;
+ i--;
+ tmp <<= 1;
+ } while (i >= 0);
+
+ tmp = 1 << i;
+ /* If the original number isn't a power of 2, round it up */
+ if (tmp != num)
+ tmp <<= 1;
+
+ return tmp;
+}
+
+extern unsigned long long memory_start, memory_end;
+
+int __init sh5pci_init(unsigned memStart, unsigned memSize)
+{
+ u32 lsr0;
+ u32 uval;
+
+ pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
+ if (!pcicr_virt) {
+ panic("Unable to remap PCICR\n");
+ }
+
+ pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
+ if (!pciio_virt) {
+ panic("Unable to remap PCIIO\n");
+ }
+
+ pr_debug("Register base addres is 0x%08lx\n", pcicr_virt);
+
+ /* Clear snoop registers */
+ SH5PCI_WRITE(CSCR0, 0);
+ SH5PCI_WRITE(CSCR1, 0);
+
+ pr_debug("Wrote to reg\n");
+
+ /* Switch off interrupts */
+ SH5PCI_WRITE(INTM, 0);
+ SH5PCI_WRITE(AINTM, 0);
+ SH5PCI_WRITE(PINTM, 0);
+
+ /* Set bus active, take it out of reset */
+ uval = SH5PCI_READ(CR);
+
+ /* Set command Register */
+ SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM);
+
+ uval=SH5PCI_READ(CR);
+ pr_debug("CR is actually 0x%08x\n",uval);
+
+ /* Allow it to be a master */
+ /* NB - WE DISABLE I/O ACCESS to stop overlap */
+ /* set WAIT bit to enable stepping, an attempt to improve stability */
+ SH5PCI_WRITE_SHORT(CSR_CMD,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT);
+
+ /*
+ ** Set translation mapping memory in order to convert the address
+ ** used for the main bus, to the PCI internal address.
+ */
+ SH5PCI_WRITE(MBR,0x40000000);
+
+ /* Always set the max size 512M */
+ SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
+
+ /*
+ ** I/O addresses are mapped at internal PCI specific address
+ ** as is described into the configuration bridge table.
+ ** These are changed to 0, to allow cards that have legacy
+ ** io such as vga to function correctly. We set the SH5 IOBAR to
+ ** 256K, which is a bit big as we can only have 64K of address space
+ */
+
+ SH5PCI_WRITE(IOBR,0x0);
+
+ pr_debug("PCI:Writing 0x%08x to IOBR\n",0);
+
+ /* Set up a 256K window. Totally pointless waste of address space */
+ SH5PCI_WRITE(IOBMR,0);
+ pr_debug("PCI:Writing 0x%08x to IOBMR\n",0);
+
+ /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally,
+ * we would want to map the I/O region somewhere, but it is so big this is not
+ * that easy!
+ */
+ SH5PCI_WRITE(CSR_IBAR0,~0);
+ /* Set memory size value */
+ memSize = memory_end - memory_start;
+
+ /* Now we set up the mbars so the PCI bus can see the memory of the machine */
+ if (memSize < (1024 * 1024)) {
+ printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize);
+ return -EINVAL;
+ }
+
+ /* Set LSR 0 */
+ lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1);
+ SH5PCI_WRITE(LSR0, lsr0);
+
+ pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0);
+
+ /* Set MBAR 0 */
+ SH5PCI_WRITE(CSR_MBAR0, memory_start);
+ SH5PCI_WRITE(LAR0, memory_start);
+
+ SH5PCI_WRITE(CSR_MBAR1,0);
+ SH5PCI_WRITE(LAR1,0);
+ SH5PCI_WRITE(LSR1,0);
+
+ pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start);
+ pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start);
+
+ /* Enable the PCI interrupts on the device */
+ SH5PCI_WRITE(INTM, ~0);
+ SH5PCI_WRITE(AINTM, ~0);
+ SH5PCI_WRITE(PINTM, ~0);
+
+ pr_debug("Switching on all error interrupts\n");
+
+ return(0);
+}
+
+static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *val)
+{
+ SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+ switch (size) {
+ case 1:
+ *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
+ break;
+ case 2:
+ *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
+ break;
+ case 4:
+ *val = SH5PCI_READ(PDR);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 val)
+{
+ SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+ switch (size) {
+ case 1:
+ SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
+ break;
+ case 2:
+ SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
+ break;
+ case 4:
+ SH5PCI_WRITE(PDR, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_config_ops = {
+ .read = sh5pci_read,
+ .write = sh5pci_write,
+};
+
+/* Everything hangs off this */
+static struct pci_bus *pci_root_bus;
+
+
+static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
+{
+ pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n",
+ dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin);
+ return PCI_SLOT(dev->devfn);
+}
+
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+ return (((pin-1) + slot) % 4) + 1;
+}
+
+u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+ if (dev->bus->number != 0) {
+ u8 pin = *pinp;
+ do {
+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ } while (dev->bus->self);
+ *pinp = pin;
+
+ /* The slot is the slot of the last bridge. */
+ }
+
+ return PCI_SLOT(dev->devfn);
+}
+
+/* This needs to be shunted out of here into the board specific bit */
+
+static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int result = -1;
+
+ /* The complication here is that the PCI IRQ lines from the Cayman's 2
+ 5V slots get into the CPU via a different path from the IRQ lines
+ from the 3 3.3V slots. Thus, we have to detect whether the card's
+ interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
+ at the point where we cross from 5V to 3.3V is not the normal case.
+
+ The added complication is that we don't know that the 5V slots are
+ always bus 2, because a card containing a PCI-PCI bridge may be
+ plugged into a 3.3V slot, and this changes the bus numbering.
+
+ Also, the Cayman has an intermediate PCI bus that goes a custom
+ expansion board header (and to the secondary bridge). This bus has
+ never been used in practice.
+
+ The 1ary onboard PCI-PCI bridge is device 3 on bus 0
+ The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge.
+ */
+
+ struct slot_pin {
+ int slot;
+ int pin;
+ } path[4];
+ int i=0;
+
+ while (dev->bus->number > 0) {
+
+ slot = path[i].slot = PCI_SLOT(dev->devfn);
+ pin = path[i].pin = bridge_swizzle(pin, slot);
+ dev = dev->bus->self;
+ i++;
+ if (i > 3) panic("PCI path to root bus too long!\n");
+ }
+
+ slot = PCI_SLOT(dev->devfn);
+ /* This is the slot on bus 0 through which the device is eventually
+ reachable. */
+
+ /* Now work back up. */
+ if ((slot < 3) || (i == 0)) {
+ /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
+ swizzle now. */
+ result = IRQ_INTA + bridge_swizzle(pin, slot) - 1;
+ } else {
+ i--;
+ slot = path[i].slot;
+ pin = path[i].pin;
+ if (slot > 0) {
+ panic("PCI expansion bus device found - not handled!\n");
+ } else {
+ if (i > 0) {
+ /* 5V slots */
+ i--;
+ slot = path[i].slot;
+ pin = path[i].pin;
+ /* 'pin' was swizzled earlier wrt slot, don't do it again. */
+ result = IRQ_P2INTA + (pin - 1);
+ } else {
+ /* IRQ for 2ary PCI-PCI bridge : unused */
+ result = -1;
+ }
+ }
+ }
+
+ return result;
+}
+
+irqreturn_t pcish5_err_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned pci_int, pci_air, pci_cir, pci_aint;
+
+ pci_int = SH5PCI_READ(INT);
+ pci_cir = SH5PCI_READ(CIR);
+ pci_air = SH5PCI_READ(AIR);
+
+ if (pci_int) {
+ printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
+ printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
+ printk("PCI AIR -> 0x%x\n", pci_air);
+ printk("PCI CIR -> 0x%x\n", pci_cir);
+ SH5PCI_WRITE(INT, ~0);
+ }
+
+ pci_aint = SH5PCI_READ(AINT);
+ if (pci_aint) {
+ printk("PCI ARB INTERRUPT!\n");
+ printk("PCI AINT -> 0x%x\n", pci_aint);
+ printk("PCI AIR -> 0x%x\n", pci_air);
+ printk("PCI CIR -> 0x%x\n", pci_cir);
+ SH5PCI_WRITE(AINT, ~0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t pcish5_serr_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ printk("SERR IRQ\n");
+
+ return IRQ_NONE;
+}
+
+#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
+
+static void __init
+pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
+ struct resource *memr)
+{
+ struct resource io_res, mem_res;
+ struct pci_dev *dev;
+ struct pci_dev *bridge = bus->self;
+ struct list_head *ln;
+
+ if (!bridge)
+ return; /* host bridge, nothing to do */
+
+ /* set reasonable default locations for pcibios_align_resource */
+ io_res.start = PCIBIOS_MIN_IO;
+ mem_res.start = PCIBIOS_MIN_MEM;
+
+ io_res.end = io_res.start;
+ mem_res.end = mem_res.start;
+
+ /* Collect information about how our direct children are layed out. */
+ for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
+ int i;
+ dev = pci_dev_b(ln);
+
+ /* Skip bridges for now */
+ if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
+ continue;
+
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ struct resource res;
+ unsigned long size;
+
+ memcpy(&res, &dev->resource[i], sizeof(res));
+ size = res.end - res.start + 1;
+
+ if (res.flags & IORESOURCE_IO) {
+ res.start = io_res.end;
+ pcibios_align_resource(dev, &res, size, 0);
+ io_res.end = res.start + size;
+ } else if (res.flags & IORESOURCE_MEM) {
+ res.start = mem_res.end;
+ pcibios_align_resource(dev, &res, size, 0);
+ mem_res.end = res.start + size;
+ }
+ }
+ }
+
+ /* And for all of the subordinate busses. */
+ for (ln=bus->children.next; ln != &bus->children; ln=ln->next)
+ pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res);
+
+ /* turn the ending locations into sizes (subtract start) */
+ io_res.end -= io_res.start;
+ mem_res.end -= mem_res.start;
+
+ /* Align the sizes up by bridge rules */
+ io_res.end = ROUND_UP(io_res.end, 4*1024) - 1;
+ mem_res.end = ROUND_UP(mem_res.end, 1*1024*1024) - 1;
+
+ /* Adjust the bridge's allocation requirements */
+ bridge->resource[0].end = bridge->resource[0].start + io_res.end;
+ bridge->resource[1].end = bridge->resource[1].start + mem_res.end;
+
+ bridge->resource[PCI_BRIDGE_RESOURCES].end =
+ bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end;
+ bridge->resource[PCI_BRIDGE_RESOURCES+1].end =
+ bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end;
+
+ /* adjust parent's resource requirements */
+ if (ior) {
+ ior->end = ROUND_UP(ior->end, 4*1024);
+ ior->end += io_res.end;
+ }
+
+ if (memr) {
+ memr->end = ROUND_UP(memr->end, 1*1024*1024);
+ memr->end += mem_res.end;
+ }
+}
+
+#undef ROUND_UP
+
+static void __init pcibios_size_bridges(void)
+{
+ struct resource io_res, mem_res;
+
+ memset(&io_res, 0, sizeof(io_res));
+ memset(&mem_res, 0, sizeof(mem_res));
+
+ pcibios_size_bridge(pci_root_bus, &io_res, &mem_res);
+}
+
+static int __init pcibios_init(void)
+{
+ if (request_irq(IRQ_ERR, pcish5_err_irq,
+ SA_INTERRUPT, "PCI Error",NULL) < 0) {
+ printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
+ return -EINVAL;
+ }
+
+ if (request_irq(IRQ_SERR, pcish5_serr_irq,
+ SA_INTERRUPT, "PCI SERR interrupt", NULL) < 0) {
+ printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
+ return -EINVAL;
+ }
+
+ /* The pci subsytem needs to know where memory is and how much
+ * of it there is. I've simply made these globals. A better mechanism
+ * is probably needed.
+ */
+ sh5pci_init(__pa(memory_start),
+ __pa(memory_end) - __pa(memory_start));
+
+ pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL);
+ pcibios_size_bridges();
+ pci_assign_unassigned_resources();
+ pci_fixup_irqs(no_swizzle, map_cayman_irq);
+
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev = bus->self;
+ int i;
+
+#if 1
+ if(dev) {
+ for(i=0; i<3; i++) {
+ bus->resource[i] =
+ &dev->resource[PCI_BRIDGE_RESOURCES+i];
+ bus->resource[i]->name = bus->name;
+ }
+ bus->resource[0]->flags |= IORESOURCE_IO;
+ bus->resource[1]->flags |= IORESOURCE_MEM;
+
+ /* For now, propagate host limits to the bus;
+ * we'll adjust them later. */
+
+#if 1
+ bus->resource[0]->end = 64*1024 - 1 ;
+ bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
+ bus->resource[0]->start = PCIBIOS_MIN_IO;
+ bus->resource[1]->start = PCIBIOS_MIN_MEM;
+#else
+ bus->resource[0]->end = 0
+ bus->resource[1]->end = 0
+ bus->resource[0]->start =0
+ bus->resource[1]->start = 0;
+#endif
+ /* Turn off downstream PF memory address range by default */
+ bus->resource[2]->start = 1024*1024;
+ bus->resource[2]->end = bus->resource[2]->start - 1;
+ }
+#endif
+
+}
+
diff --git a/arch/sh64/kernel/pci_sh5.h b/arch/sh64/kernel/pci_sh5.h
new file mode 100644
index 000000000000..8f21f5d2aa3e
--- /dev/null
+++ b/arch/sh64/kernel/pci_sh5.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Defintions for the SH5 PCI hardware.
+ */
+
+/* Product ID */
+#define PCISH5_PID 0x350d
+
+/* vendor ID */
+#define PCISH5_VID 0x1054
+
+/* Configuration types */
+#define ST_TYPE0 0x00 /* Configuration cycle type 0 */
+#define ST_TYPE1 0x01 /* Configuration cycle type 1 */
+
+/* VCR data */
+#define PCISH5_VCR_STATUS 0x00
+#define PCISH5_VCR_VERSION 0x08
+
+/*
+** ICR register offsets and bits
+*/
+#define PCISH5_ICR_CR 0x100 /* PCI control register values */
+#define CR_PBAM (1<<12)
+#define CR_PFCS (1<<11)
+#define CR_FTO (1<<10)
+#define CR_PFE (1<<9)
+#define CR_TBS (1<<8)
+#define CR_SPUE (1<<7)
+#define CR_BMAM (1<<6)
+#define CR_HOST (1<<5)
+#define CR_CLKEN (1<<4)
+#define CR_SOCS (1<<3)
+#define CR_IOCS (1<<2)
+#define CR_RSTCTL (1<<1)
+#define CR_CFINT (1<<0)
+#define CR_LOCK_MASK 0xa5000000
+
+#define PCISH5_ICR_INT 0x114 /* Interrupt registert values */
+#define INT_MADIM (1<<2)
+
+#define PCISH5_ICR_LSR0 0X104 /* Local space register values */
+#define PCISH5_ICR_LSR1 0X108 /* Local space register values */
+#define PCISH5_ICR_LAR0 0x10c /* Local address register values */
+#define PCISH5_ICR_LAR1 0x110 /* Local address register values */
+#define PCISH5_ICR_INTM 0x118 /* Interrupt mask register values */
+#define PCISH5_ICR_AIR 0x11c /* Interrupt error address information register values */
+#define PCISH5_ICR_CIR 0x120 /* Interrupt error command information register values */
+#define PCISH5_ICR_AINT 0x130 /* Interrupt error arbiter interrupt register values */
+#define PCISH5_ICR_AINTM 0x134 /* Interrupt error arbiter interrupt mask register values */
+#define PCISH5_ICR_BMIR 0x138 /* Interrupt error info register of bus master values */
+#define PCISH5_ICR_PAR 0x1c0 /* Pio address register values */
+#define PCISH5_ICR_MBR 0x1c4 /* Memory space bank register values */
+#define PCISH5_ICR_IOBR 0x1c8 /* I/O space bank register values */
+#define PCISH5_ICR_PINT 0x1cc /* power management interrupt register values */
+#define PCISH5_ICR_PINTM 0x1d0 /* power management interrupt mask register values */
+#define PCISH5_ICR_MBMR 0x1d8 /* memory space bank mask register values */
+#define PCISH5_ICR_IOBMR 0x1dc /* I/O space bank mask register values */
+#define PCISH5_ICR_CSCR0 0x210 /* PCI cache snoop control register 0 */
+#define PCISH5_ICR_CSCR1 0x214 /* PCI cache snoop control register 1 */
+#define PCISH5_ICR_PDR 0x220 /* Pio data register values */
+
+/* These are configs space registers */
+#define PCISH5_ICR_CSR_VID 0x000 /* Vendor id */
+#define PCISH5_ICR_CSR_DID 0x002 /* Device id */
+#define PCISH5_ICR_CSR_CMD 0x004 /* Command register */
+#define PCISH5_ICR_CSR_STATUS 0x006 /* Stautus */
+#define PCISH5_ICR_CSR_IBAR0 0x010 /* I/O base address register */
+#define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */
+#define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */
+
+
+
+/* Base address of registers */
+#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000)
+#define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000)
+/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */
+
+/* Register selection macro */
+#define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x))
+/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
+
+/* Write I/O functions */
+#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg))
+
+/* Read I/O functions */
+#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg))
+
+/* Set PCI config bits */
+#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
+
+/* Set PCI command register */
+#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where)
+
+/* Size converters */
+#define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18)
+#define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18)
+
+
diff --git a/arch/sh64/kernel/pcibios.c b/arch/sh64/kernel/pcibios.c
new file mode 100644
index 000000000000..50c61dcb9fae
--- /dev/null
+++ b/arch/sh64/kernel/pcibios.c
@@ -0,0 +1,168 @@
+/*
+ * $Id: pcibios.c,v 1.1 2001/08/24 12:38:19 dwmw2 Exp $
+ *
+ * arch/sh/kernel/pcibios.c
+ *
+ * Copyright (C) 2002 STMicroelectronics Limited
+ * Author : David J. McKay
+ *
+ * Copyright (C) 2004 Richard Curnow, SuperH UK Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * This is GPL'd.
+ *
+ * Provided here are generic versions of:
+ * pcibios_update_resource()
+ * pcibios_align_resource()
+ * pcibios_enable_device()
+ * pcibios_set_master()
+ * pcibios_update_irq()
+ *
+ * These functions are collected here to reduce duplication of common
+ * code amongst the many platform-specific PCI support code files.
+ *
+ * Platform-specific files are expected to provide:
+ * pcibios_fixup_bus()
+ * pcibios_init()
+ * pcibios_setup()
+ * pcibios_fixup_pbus_ranges()
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+void
+pcibios_update_resource(struct pci_dev *dev, struct resource *root,
+ struct resource *res, int resource)
+{
+ u32 new, check;
+ int reg;
+
+ new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
+ if (resource < 6) {
+ reg = PCI_BASE_ADDRESS_0 + 4*resource;
+ } else if (resource == PCI_ROM_RESOURCE) {
+ res->flags |= IORESOURCE_ROM_ENABLE;
+ new |= PCI_ROM_ADDRESS_ENABLE;
+ reg = dev->rom_base_reg;
+ } else {
+ /* Somebody might have asked allocation of a non-standard resource */
+ return;
+ }
+
+ pci_write_config_dword(dev, reg, new);
+ pci_read_config_dword(dev, reg, &check);
+ if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
+ printk(KERN_ERR "PCI: Error while updating region "
+ "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
+ new, check);
+ }
+}
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+ unsigned long size, unsigned long align)
+{
+ if (res->flags & IORESOURCE_IO) {
+ unsigned long start = res->start;
+
+ if (start & 0x300) {
+ start = (start + 0x3ff) & ~0x3ff;
+ res->start = start;
+ }
+ }
+}
+
+static void pcibios_enable_bridge(struct pci_dev *dev)
+{
+ struct pci_bus *bus = dev->subordinate;
+ u16 cmd, old_cmd;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+
+ if (bus->resource[0]->flags & IORESOURCE_IO) {
+ cmd |= PCI_COMMAND_IO;
+ }
+ if ((bus->resource[1]->flags & IORESOURCE_MEM) ||
+ (bus->resource[2]->flags & IORESOURCE_PREFETCH)) {
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+
+ if (cmd != old_cmd) {
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+
+ printk("PCI bridge %s, command register -> %04x\n",
+ pci_name(dev), cmd);
+
+}
+
+
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pcibios_enable_bridge(dev);
+ }
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for(idx=0; idx<6; idx++) {
+ if (!(mask & (1 << idx)))
+ continue;
+ r = &dev->resource[idx];
+ if (!r->start && r->end) {
+ printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ if (dev->resource[PCI_ROM_RESOURCE].start)
+ cmd |= PCI_COMMAND_MEMORY;
+ if (cmd != old_cmd) {
+ printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+/*
+ * If we set up a device for bus mastering, we need to check and set
+ * the latency timer as it may not be properly set.
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+ u8 lat;
+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+ if (lat < 16)
+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+ else if (lat > pcibios_max_latency)
+ lat = pcibios_max_latency;
+ else
+ return;
+ printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c
new file mode 100644
index 000000000000..efde41c0cd66
--- /dev/null
+++ b/arch/sh64/kernel/process.c
@@ -0,0 +1,962 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/process.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2003, 2004 Richard Curnow
+ *
+ * Started from SH3/4 version:
+ * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
+ *
+ * In turn started from i386 version:
+ * Copyright (C) 1995 Linus Torvalds
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+/* Temporary flags/tests. All to be removed/undefined. BEGIN */
+#define IDLE_TRACE
+#define VM_SHOW_TABLES
+#define VM_TEST_FAULT
+#define VM_TEST_RTLBMISS
+#define VM_TEST_WTLBMISS
+
+#undef VM_SHOW_TABLES
+#undef IDLE_TRACE
+/* Temporary flags/tests. All to be removed/undefined. END */
+
+#define __KERNEL_SYSCALLS__
+#include <stdarg.h>
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/unistd.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/processor.h> /* includes also <asm/registers.h> */
+#include <asm/mmu_context.h>
+#include <asm/elf.h>
+#include <asm/page.h>
+
+#include <linux/irq.h>
+
+struct task_struct *last_task_used_math = NULL;
+
+#ifdef IDLE_TRACE
+#ifdef VM_SHOW_TABLES
+/* For testing */
+static void print_PTE(long base)
+{
+ int i, skip=0;
+ long long x, y, *p = (long long *) base;
+
+ for (i=0; i< 512; i++, p++){
+ if (*p == 0) {
+ if (!skip) {
+ skip++;
+ printk("(0s) ");
+ }
+ } else {
+ skip=0;
+ x = (*p) >> 32;
+ y = (*p) & 0xffffffff;
+ printk("%08Lx%08Lx ", x, y);
+ if (!((i+1)&0x3)) printk("\n");
+ }
+ }
+}
+
+/* For testing */
+static void print_DIR(long base)
+{
+ int i, skip=0;
+ long *p = (long *) base;
+
+ for (i=0; i< 512; i++, p++){
+ if (*p == 0) {
+ if (!skip) {
+ skip++;
+ printk("(0s) ");
+ }
+ } else {
+ skip=0;
+ printk("%08lx ", *p);
+ if (!((i+1)&0x7)) printk("\n");
+ }
+ }
+}
+
+/* For testing */
+static void print_vmalloc_first_tables(void)
+{
+
+#define PRESENT 0x800 /* Bit 11 */
+
+ /*
+ * Do it really dirty by looking at raw addresses,
+ * raw offsets, no types. If we used pgtable/pgalloc
+ * macros/definitions we could hide potential bugs.
+ *
+ * Note that pointers are 32-bit for CDC.
+ */
+ long pgdt, pmdt, ptet;
+
+ pgdt = (long) &swapper_pg_dir;
+ printk("-->PGD (0x%08lx):\n", pgdt);
+ print_DIR(pgdt);
+ printk("\n");
+
+ /* VMALLOC pool is mapped at 0xc0000000, second (pointer) entry in PGD */
+ pgdt += 4;
+ pmdt = (long) (* (long *) pgdt);
+ if (!(pmdt & PRESENT)) {
+ printk("No PMD\n");
+ return;
+ } else pmdt &= 0xfffff000;
+
+ printk("-->PMD (0x%08lx):\n", pmdt);
+ print_DIR(pmdt);
+ printk("\n");
+
+ /* Get the pmdt displacement for 0xc0000000 */
+ pmdt += 2048;
+
+ /* just look at first two address ranges ... */
+ /* ... 0xc0000000 ... */
+ ptet = (long) (* (long *) pmdt);
+ if (!(ptet & PRESENT)) {
+ printk("No PTE0\n");
+ return;
+ } else ptet &= 0xfffff000;
+
+ printk("-->PTE0 (0x%08lx):\n", ptet);
+ print_PTE(ptet);
+ printk("\n");
+
+ /* ... 0xc0001000 ... */
+ ptet += 4;
+ if (!(ptet & PRESENT)) {
+ printk("No PTE1\n");
+ return;
+ } else ptet &= 0xfffff000;
+ printk("-->PTE1 (0x%08lx):\n", ptet);
+ print_PTE(ptet);
+ printk("\n");
+}
+#else
+#define print_vmalloc_first_tables()
+#endif /* VM_SHOW_TABLES */
+
+static void test_VM(void)
+{
+ void *a, *b, *c;
+
+#ifdef VM_SHOW_TABLES
+ printk("Initial PGD/PMD/PTE\n");
+#endif
+ print_vmalloc_first_tables();
+
+ printk("Allocating 2 bytes\n");
+ a = vmalloc(2);
+ print_vmalloc_first_tables();
+
+ printk("Allocating 4100 bytes\n");
+ b = vmalloc(4100);
+ print_vmalloc_first_tables();
+
+ printk("Allocating 20234 bytes\n");
+ c = vmalloc(20234);
+ print_vmalloc_first_tables();
+
+#ifdef VM_TEST_FAULT
+ /* Here you may want to fault ! */
+
+#ifdef VM_TEST_RTLBMISS
+ printk("Ready to fault upon read.\n");
+ if (* (char *) a) {
+ printk("RTLBMISSed on area a !\n");
+ }
+ printk("RTLBMISSed on area a !\n");
+#endif
+
+#ifdef VM_TEST_WTLBMISS
+ printk("Ready to fault upon write.\n");
+ *((char *) b) = 'L';
+ printk("WTLBMISSed on area b !\n");
+#endif
+
+#endif /* VM_TEST_FAULT */
+
+ printk("Deallocating the 4100 byte chunk\n");
+ vfree(b);
+ print_vmalloc_first_tables();
+
+ printk("Deallocating the 2 byte chunk\n");
+ vfree(a);
+ print_vmalloc_first_tables();
+
+ printk("Deallocating the last chunk\n");
+ vfree(c);
+ print_vmalloc_first_tables();
+}
+
+extern unsigned long volatile jiffies;
+int once = 0;
+unsigned long old_jiffies;
+int pid = -1, pgid = -1;
+
+void idle_trace(void)
+{
+
+ _syscall0(int, getpid)
+ _syscall1(int, getpgid, int, pid)
+
+ if (!once) {
+ /* VM allocation/deallocation simple test */
+ test_VM();
+ pid = getpid();
+
+ printk("Got all through to Idle !!\n");
+ printk("I'm now going to loop forever ...\n");
+ printk("Any ! below is a timer tick.\n");
+ printk("Any . below is a getpgid system call from pid = %d.\n", pid);
+
+
+ old_jiffies = jiffies;
+ once++;
+ }
+
+ if (old_jiffies != jiffies) {
+ old_jiffies = jiffies - old_jiffies;
+ switch (old_jiffies) {
+ case 1:
+ printk("!");
+ break;
+ case 2:
+ printk("!!");
+ break;
+ case 3:
+ printk("!!!");
+ break;
+ case 4:
+ printk("!!!!");
+ break;
+ default:
+ printk("(%d!)", (int) old_jiffies);
+ }
+ old_jiffies = jiffies;
+ }
+ pgid = getpgid(pid);
+ printk(".");
+}
+#else
+#define idle_trace() do { } while (0)
+#endif /* IDLE_TRACE */
+
+static int hlt_counter = 1;
+
+#define HARD_IDLE_TIMEOUT (HZ / 3)
+
+void disable_hlt(void)
+{
+ hlt_counter++;
+}
+
+void enable_hlt(void)
+{
+ hlt_counter--;
+}
+
+static int __init nohlt_setup(char *__unused)
+{
+ hlt_counter = 1;
+ return 1;
+}
+
+static int __init hlt_setup(char *__unused)
+{
+ hlt_counter = 0;
+ return 1;
+}
+
+__setup("nohlt", nohlt_setup);
+__setup("hlt", hlt_setup);
+
+static inline void hlt(void)
+{
+ if (hlt_counter)
+ return;
+
+ __asm__ __volatile__ ("sleep" : : : "memory");
+}
+
+/*
+ * The idle loop on a uniprocessor SH..
+ */
+void default_idle(void)
+{
+ /* endless idle loop with no priority at all */
+ while (1) {
+ if (hlt_counter) {
+ while (1)
+ if (need_resched())
+ break;
+ } else {
+ local_irq_disable();
+ while (!need_resched()) {
+ local_irq_enable();
+ idle_trace();
+ hlt();
+ local_irq_disable();
+ }
+ local_irq_enable();
+ }
+ schedule();
+ }
+}
+
+void cpu_idle(void)
+{
+ default_idle();
+}
+
+void machine_restart(char * __unused)
+{
+ extern void phys_stext(void);
+
+ phys_stext();
+}
+
+void machine_halt(void)
+{
+ for (;;);
+}
+
+void machine_power_off(void)
+{
+ extern void enter_deep_standby(void);
+
+ enter_deep_standby();
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ unsigned long long ah, al, bh, bl, ch, cl;
+
+ printk("\n");
+
+ ah = (regs->pc) >> 32;
+ al = (regs->pc) & 0xffffffff;
+ bh = (regs->regs[18]) >> 32;
+ bl = (regs->regs[18]) & 0xffffffff;
+ ch = (regs->regs[15]) >> 32;
+ cl = (regs->regs[15]) & 0xffffffff;
+ printk("PC : %08Lx%08Lx LINK: %08Lx%08Lx SP : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->sr) >> 32;
+ al = (regs->sr) & 0xffffffff;
+ asm volatile ("getcon " __TEA ", %0" : "=r" (bh));
+ asm volatile ("getcon " __TEA ", %0" : "=r" (bl));
+ bh = (bh) >> 32;
+ bl = (bl) & 0xffffffff;
+ asm volatile ("getcon " __KCR0 ", %0" : "=r" (ch));
+ asm volatile ("getcon " __KCR0 ", %0" : "=r" (cl));
+ ch = (ch) >> 32;
+ cl = (cl) & 0xffffffff;
+ printk("SR : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[0]) >> 32;
+ al = (regs->regs[0]) & 0xffffffff;
+ bh = (regs->regs[1]) >> 32;
+ bl = (regs->regs[1]) & 0xffffffff;
+ ch = (regs->regs[2]) >> 32;
+ cl = (regs->regs[2]) & 0xffffffff;
+ printk("R0 : %08Lx%08Lx R1 : %08Lx%08Lx R2 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[3]) >> 32;
+ al = (regs->regs[3]) & 0xffffffff;
+ bh = (regs->regs[4]) >> 32;
+ bl = (regs->regs[4]) & 0xffffffff;
+ ch = (regs->regs[5]) >> 32;
+ cl = (regs->regs[5]) & 0xffffffff;
+ printk("R3 : %08Lx%08Lx R4 : %08Lx%08Lx R5 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[6]) >> 32;
+ al = (regs->regs[6]) & 0xffffffff;
+ bh = (regs->regs[7]) >> 32;
+ bl = (regs->regs[7]) & 0xffffffff;
+ ch = (regs->regs[8]) >> 32;
+ cl = (regs->regs[8]) & 0xffffffff;
+ printk("R6 : %08Lx%08Lx R7 : %08Lx%08Lx R8 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[9]) >> 32;
+ al = (regs->regs[9]) & 0xffffffff;
+ bh = (regs->regs[10]) >> 32;
+ bl = (regs->regs[10]) & 0xffffffff;
+ ch = (regs->regs[11]) >> 32;
+ cl = (regs->regs[11]) & 0xffffffff;
+ printk("R9 : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[12]) >> 32;
+ al = (regs->regs[12]) & 0xffffffff;
+ bh = (regs->regs[13]) >> 32;
+ bl = (regs->regs[13]) & 0xffffffff;
+ ch = (regs->regs[14]) >> 32;
+ cl = (regs->regs[14]) & 0xffffffff;
+ printk("R12 : %08Lx%08Lx R13 : %08Lx%08Lx R14 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[16]) >> 32;
+ al = (regs->regs[16]) & 0xffffffff;
+ bh = (regs->regs[17]) >> 32;
+ bl = (regs->regs[17]) & 0xffffffff;
+ ch = (regs->regs[19]) >> 32;
+ cl = (regs->regs[19]) & 0xffffffff;
+ printk("R16 : %08Lx%08Lx R17 : %08Lx%08Lx R19 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[20]) >> 32;
+ al = (regs->regs[20]) & 0xffffffff;
+ bh = (regs->regs[21]) >> 32;
+ bl = (regs->regs[21]) & 0xffffffff;
+ ch = (regs->regs[22]) >> 32;
+ cl = (regs->regs[22]) & 0xffffffff;
+ printk("R20 : %08Lx%08Lx R21 : %08Lx%08Lx R22 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[23]) >> 32;
+ al = (regs->regs[23]) & 0xffffffff;
+ bh = (regs->regs[24]) >> 32;
+ bl = (regs->regs[24]) & 0xffffffff;
+ ch = (regs->regs[25]) >> 32;
+ cl = (regs->regs[25]) & 0xffffffff;
+ printk("R23 : %08Lx%08Lx R24 : %08Lx%08Lx R25 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[26]) >> 32;
+ al = (regs->regs[26]) & 0xffffffff;
+ bh = (regs->regs[27]) >> 32;
+ bl = (regs->regs[27]) & 0xffffffff;
+ ch = (regs->regs[28]) >> 32;
+ cl = (regs->regs[28]) & 0xffffffff;
+ printk("R26 : %08Lx%08Lx R27 : %08Lx%08Lx R28 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[29]) >> 32;
+ al = (regs->regs[29]) & 0xffffffff;
+ bh = (regs->regs[30]) >> 32;
+ bl = (regs->regs[30]) & 0xffffffff;
+ ch = (regs->regs[31]) >> 32;
+ cl = (regs->regs[31]) & 0xffffffff;
+ printk("R29 : %08Lx%08Lx R30 : %08Lx%08Lx R31 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[32]) >> 32;
+ al = (regs->regs[32]) & 0xffffffff;
+ bh = (regs->regs[33]) >> 32;
+ bl = (regs->regs[33]) & 0xffffffff;
+ ch = (regs->regs[34]) >> 32;
+ cl = (regs->regs[34]) & 0xffffffff;
+ printk("R32 : %08Lx%08Lx R33 : %08Lx%08Lx R34 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[35]) >> 32;
+ al = (regs->regs[35]) & 0xffffffff;
+ bh = (regs->regs[36]) >> 32;
+ bl = (regs->regs[36]) & 0xffffffff;
+ ch = (regs->regs[37]) >> 32;
+ cl = (regs->regs[37]) & 0xffffffff;
+ printk("R35 : %08Lx%08Lx R36 : %08Lx%08Lx R37 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[38]) >> 32;
+ al = (regs->regs[38]) & 0xffffffff;
+ bh = (regs->regs[39]) >> 32;
+ bl = (regs->regs[39]) & 0xffffffff;
+ ch = (regs->regs[40]) >> 32;
+ cl = (regs->regs[40]) & 0xffffffff;
+ printk("R38 : %08Lx%08Lx R39 : %08Lx%08Lx R40 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[41]) >> 32;
+ al = (regs->regs[41]) & 0xffffffff;
+ bh = (regs->regs[42]) >> 32;
+ bl = (regs->regs[42]) & 0xffffffff;
+ ch = (regs->regs[43]) >> 32;
+ cl = (regs->regs[43]) & 0xffffffff;
+ printk("R41 : %08Lx%08Lx R42 : %08Lx%08Lx R43 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[44]) >> 32;
+ al = (regs->regs[44]) & 0xffffffff;
+ bh = (regs->regs[45]) >> 32;
+ bl = (regs->regs[45]) & 0xffffffff;
+ ch = (regs->regs[46]) >> 32;
+ cl = (regs->regs[46]) & 0xffffffff;
+ printk("R44 : %08Lx%08Lx R45 : %08Lx%08Lx R46 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[47]) >> 32;
+ al = (regs->regs[47]) & 0xffffffff;
+ bh = (regs->regs[48]) >> 32;
+ bl = (regs->regs[48]) & 0xffffffff;
+ ch = (regs->regs[49]) >> 32;
+ cl = (regs->regs[49]) & 0xffffffff;
+ printk("R47 : %08Lx%08Lx R48 : %08Lx%08Lx R49 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[50]) >> 32;
+ al = (regs->regs[50]) & 0xffffffff;
+ bh = (regs->regs[51]) >> 32;
+ bl = (regs->regs[51]) & 0xffffffff;
+ ch = (regs->regs[52]) >> 32;
+ cl = (regs->regs[52]) & 0xffffffff;
+ printk("R50 : %08Lx%08Lx R51 : %08Lx%08Lx R52 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[53]) >> 32;
+ al = (regs->regs[53]) & 0xffffffff;
+ bh = (regs->regs[54]) >> 32;
+ bl = (regs->regs[54]) & 0xffffffff;
+ ch = (regs->regs[55]) >> 32;
+ cl = (regs->regs[55]) & 0xffffffff;
+ printk("R53 : %08Lx%08Lx R54 : %08Lx%08Lx R55 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[56]) >> 32;
+ al = (regs->regs[56]) & 0xffffffff;
+ bh = (regs->regs[57]) >> 32;
+ bl = (regs->regs[57]) & 0xffffffff;
+ ch = (regs->regs[58]) >> 32;
+ cl = (regs->regs[58]) & 0xffffffff;
+ printk("R56 : %08Lx%08Lx R57 : %08Lx%08Lx R58 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[59]) >> 32;
+ al = (regs->regs[59]) & 0xffffffff;
+ bh = (regs->regs[60]) >> 32;
+ bl = (regs->regs[60]) & 0xffffffff;
+ ch = (regs->regs[61]) >> 32;
+ cl = (regs->regs[61]) & 0xffffffff;
+ printk("R59 : %08Lx%08Lx R60 : %08Lx%08Lx R61 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[62]) >> 32;
+ al = (regs->regs[62]) & 0xffffffff;
+ bh = (regs->tregs[0]) >> 32;
+ bl = (regs->tregs[0]) & 0xffffffff;
+ ch = (regs->tregs[1]) >> 32;
+ cl = (regs->tregs[1]) & 0xffffffff;
+ printk("R62 : %08Lx%08Lx T0 : %08Lx%08Lx T1 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->tregs[2]) >> 32;
+ al = (regs->tregs[2]) & 0xffffffff;
+ bh = (regs->tregs[3]) >> 32;
+ bl = (regs->tregs[3]) & 0xffffffff;
+ ch = (regs->tregs[4]) >> 32;
+ cl = (regs->tregs[4]) & 0xffffffff;
+ printk("T2 : %08Lx%08Lx T3 : %08Lx%08Lx T4 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->tregs[5]) >> 32;
+ al = (regs->tregs[5]) & 0xffffffff;
+ bh = (regs->tregs[6]) >> 32;
+ bl = (regs->tregs[6]) & 0xffffffff;
+ ch = (regs->tregs[7]) >> 32;
+ cl = (regs->tregs[7]) & 0xffffffff;
+ printk("T5 : %08Lx%08Lx T6 : %08Lx%08Lx T7 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ /*
+ * If we're in kernel mode, dump the stack too..
+ */
+ if (!user_mode(regs)) {
+ void show_stack(struct task_struct *tsk, unsigned long *sp);
+ unsigned long sp = regs->regs[15] & 0xffffffff;
+ struct task_struct *tsk = get_current();
+
+ tsk->thread.kregs = regs;
+
+ show_stack(tsk, (unsigned long *)sp);
+ }
+}
+
+struct task_struct * alloc_task_struct(void)
+{
+ /* Get task descriptor pages */
+ return (struct task_struct *)
+ __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE));
+}
+
+void free_task_struct(struct task_struct *p)
+{
+ free_pages((unsigned long) p, get_order(THREAD_SIZE));
+}
+
+/*
+ * Create a kernel thread
+ */
+
+/*
+ * This is the mechanism for creating a new kernel thread.
+ *
+ * NOTE! Only a kernel-only process(ie the swapper or direct descendants
+ * who haven't done an "execve()") should use this: it will work within
+ * a system call from a "real" process, but the process memory space will
+ * not be free'd until both the parent and the child have exited.
+ */
+int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+{
+ /* A bit less processor dependent than older sh ... */
+ unsigned int reply;
+
+static __inline__ _syscall2(int,clone,unsigned long,flags,unsigned long,newsp)
+static __inline__ _syscall1(int,exit,int,ret)
+
+ reply = clone(flags | CLONE_VM, 0);
+ if (!reply) {
+ /* Child */
+ reply = exit(fn(arg));
+ }
+
+ return reply;
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+ /* See arch/sparc/kernel/process.c for the precedent for doing this -- RPC.
+
+ The SH-5 FPU save/restore approach relies on last_task_used_math
+ pointing to a live task_struct. When another task tries to use the
+ FPU for the 1st time, the FPUDIS trap handling (see
+ arch/sh64/kernel/fpu.c) will save the existing FPU state to the
+ FP regs field within last_task_used_math before re-loading the new
+ task's FPU state (or initialising it if the FPU has been used
+ before). So if last_task_used_math is stale, and its page has already been
+ re-allocated for another use, the consequences are rather grim. Unless we
+ null it here, there is no other path through which it would get safely
+ nulled. */
+
+#ifdef CONFIG_SH_FPU
+ if (last_task_used_math == current) {
+ last_task_used_math = NULL;
+ }
+#endif
+}
+
+void flush_thread(void)
+{
+
+ /* Called by fs/exec.c (flush_old_exec) to remove traces of a
+ * previously running executable. */
+#ifdef CONFIG_SH_FPU
+ if (last_task_used_math == current) {
+ last_task_used_math = NULL;
+ }
+ /* Force FPU state to be reinitialised after exec */
+ clear_used_math();
+#endif
+
+ /* if we are a kernel thread, about to change to user thread,
+ * update kreg
+ */
+ if(current->thread.kregs==&fake_swapper_regs) {
+ current->thread.kregs =
+ ((struct pt_regs *)(THREAD_SIZE + (unsigned long) current) - 1);
+ current->thread.uregs = current->thread.kregs;
+ }
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+ /* do nothing */
+}
+
+/* Fill in the fpu structure for a core dump.. */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+#ifdef CONFIG_SH_FPU
+ int fpvalid;
+ struct task_struct *tsk = current;
+
+ fpvalid = !!tsk_used_math(tsk);
+ if (fpvalid) {
+ if (current == last_task_used_math) {
+ grab_fpu();
+ fpsave(&tsk->thread.fpu.hard);
+ release_fpu();
+ last_task_used_math = 0;
+ regs->sr |= SR_FD;
+ }
+
+ memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu));
+ }
+
+ return fpvalid;
+#else
+ return 0; /* Task didn't use the fpu at all. */
+#endif
+}
+
+asmlinkage void ret_from_fork(void);
+
+int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+ unsigned long unused,
+ struct task_struct *p, struct pt_regs *regs)
+{
+ struct pt_regs *childregs;
+ unsigned long long se; /* Sign extension */
+
+#ifdef CONFIG_SH_FPU
+ if(last_task_used_math == current) {
+ grab_fpu();
+ fpsave(&current->thread.fpu.hard);
+ release_fpu();
+ last_task_used_math = NULL;
+ regs->sr |= SR_FD;
+ }
+#endif
+ /* Copy from sh version */
+ childregs = ((struct pt_regs *)(THREAD_SIZE + (unsigned long) p->thread_info )) - 1;
+
+ *childregs = *regs;
+
+ if (user_mode(regs)) {
+ childregs->regs[15] = usp;
+ p->thread.uregs = childregs;
+ } else {
+ childregs->regs[15] = (unsigned long)p->thread_info + THREAD_SIZE;
+ }
+
+ childregs->regs[9] = 0; /* Set return value for child */
+ childregs->sr |= SR_FD; /* Invalidate FPU flag */
+
+ p->thread.sp = (unsigned long) childregs;
+ p->thread.pc = (unsigned long) ret_from_fork;
+
+ /*
+ * Sign extend the edited stack.
+ * Note that thread.pc and thread.pc will stay
+ * 32-bit wide and context switch must take care
+ * of NEFF sign extension.
+ */
+
+ se = childregs->regs[15];
+ se = (se & NEFF_SIGN) ? (se | NEFF_MASK) : se;
+ childregs->regs[15] = se;
+
+ return 0;
+}
+
+/*
+ * fill in the user structure for a core dump..
+ */
+void dump_thread(struct pt_regs * regs, struct user * dump)
+{
+ dump->magic = CMAGIC;
+ dump->start_code = current->mm->start_code;
+ dump->start_data = current->mm->start_data;
+ dump->start_stack = regs->regs[15] & ~(PAGE_SIZE - 1);
+ dump->u_tsize = (current->mm->end_code - dump->start_code) >> PAGE_SHIFT;
+ dump->u_dsize = (current->mm->brk + (PAGE_SIZE-1) - dump->start_data) >> PAGE_SHIFT;
+ dump->u_ssize = (current->mm->start_stack - dump->start_stack +
+ PAGE_SIZE - 1) >> PAGE_SHIFT;
+ /* Debug registers will come here. */
+
+ dump->regs = *regs;
+
+ dump->u_fpvalid = dump_fpu(regs, &dump->fpu);
+}
+
+asmlinkage int sys_fork(unsigned long r2, unsigned long r3,
+ unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs *pregs)
+{
+ return do_fork(SIGCHLD, pregs->regs[15], pregs, 0, 0, 0);
+}
+
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+ unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs *pregs)
+{
+ if (!newsp)
+ newsp = pregs->regs[15];
+ return do_fork(clone_flags, newsp, pregs, 0, 0, 0);
+}
+
+/*
+ * This is trivial, and on the face of it looks like it
+ * could equally well be done in user mode.
+ *
+ * Not so, for quite unobvious reasons - register pressure.
+ * In user mode vfork() cannot have a stack frame, and if
+ * done by calling the "clone()" system call directly, you
+ * do not have enough call-clobbered registers to hold all
+ * the information you need.
+ */
+asmlinkage int sys_vfork(unsigned long r2, unsigned long r3,
+ unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs *pregs)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, pregs->regs[15], pregs, 0, 0, 0);
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+asmlinkage int sys_execve(char *ufilename, char **uargv,
+ char **uenvp, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs *pregs)
+{
+ int error;
+ char *filename;
+
+ lock_kernel();
+ filename = getname((char __user *)ufilename);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+
+ error = do_execve(filename,
+ (char __user * __user *)uargv,
+ (char __user * __user *)uenvp,
+ pregs);
+ if (error == 0) {
+ task_lock(current);
+ current->ptrace &= ~PT_DTRACE;
+ task_unlock(current);
+ }
+ putname(filename);
+out:
+ unlock_kernel();
+ return error;
+}
+
+/*
+ * These bracket the sleeping functions..
+ */
+extern void interruptible_sleep_on(wait_queue_head_t *q);
+
+#define mid_sched ((unsigned long) interruptible_sleep_on)
+
+static int in_sh64_switch_to(unsigned long pc)
+{
+ extern char __sh64_switch_to_end;
+ /* For a sleeping task, the PC is somewhere in the middle of the function,
+ so we don't have to worry about masking the LSB off */
+ return (pc >= (unsigned long) sh64_switch_to) &&
+ (pc < (unsigned long) &__sh64_switch_to_end);
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long schedule_fp;
+ unsigned long sh64_switch_to_fp;
+ unsigned long schedule_caller_pc;
+ unsigned long pc;
+
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ /*
+ * The same comment as on the Alpha applies here, too ...
+ */
+ pc = thread_saved_pc(p);
+
+#ifdef CONFIG_FRAME_POINTER
+ if (in_sh64_switch_to(pc)) {
+ sh64_switch_to_fp = (long) p->thread.sp;
+ /* r14 is saved at offset 4 in the sh64_switch_to frame */
+ schedule_fp = *(unsigned long *) (long)(sh64_switch_to_fp + 4);
+
+ /* and the caller of 'schedule' is (currently!) saved at offset 24
+ in the frame of schedule (from disasm) */
+ schedule_caller_pc = *(unsigned long *) (long)(schedule_fp + 24);
+ return schedule_caller_pc;
+ }
+#endif
+ return pc;
+}
+
+/* Provide a /proc/asids file that lists out the
+ ASIDs currently associated with the processes. (If the DM.PC register is
+ examined through the debug link, this shows ASID + PC. To make use of this,
+ the PID->ASID relationship needs to be known. This is primarily for
+ debugging.)
+ */
+
+#if defined(CONFIG_SH64_PROC_ASIDS)
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+
+static int
+asids_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void *data)
+{
+ int len=0;
+ struct task_struct *p;
+ read_lock(&tasklist_lock);
+ for_each_process(p) {
+ int pid = p->pid;
+ struct mm_struct *mm;
+ if (!pid) continue;
+ mm = p->mm;
+ if (mm) {
+ unsigned long asid, context;
+ context = mm->context;
+ asid = (context & 0xff);
+ len += sprintf(buf+len, "%5d : %02lx\n", pid, asid);
+ } else {
+ len += sprintf(buf+len, "%5d : (none)\n", pid);
+ }
+ }
+ read_unlock(&tasklist_lock);
+ *eof = 1;
+ return len;
+}
+
+static int __init register_proc_asids(void)
+{
+ create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL);
+ return 0;
+}
+
+__initcall(register_proc_asids);
+#endif
+
diff --git a/arch/sh64/kernel/ptrace.c b/arch/sh64/kernel/ptrace.c
new file mode 100644
index 000000000000..800288c1562b
--- /dev/null
+++ b/arch/sh64/kernel/ptrace.c
@@ -0,0 +1,376 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/ptrace.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * Started from SH3/4 version:
+ * SuperH version: Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
+ *
+ * Original x86 implementation:
+ * By Ross Biro 1/23/92
+ * edited by Linus Torvalds
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+
+/* This mask defines the bits of the SR which the user is not allowed to
+ change, which are everything except S, Q, M, PR, SZ, FR. */
+#define SR_MASK (0xffff8cfd)
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/*
+ * This routine will get a word from the user area in the process kernel stack.
+ */
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+ unsigned char *stack;
+
+ stack = (unsigned char *)(task->thread.uregs);
+ stack += offset;
+ return (*((int *)stack));
+}
+
+static inline unsigned long
+get_fpu_long(struct task_struct *task, unsigned long addr)
+{
+ unsigned long tmp;
+ struct pt_regs *regs;
+ regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
+
+ if (!tsk_used_math(task)) {
+ if (addr == offsetof(struct user_fpu_struct, fpscr)) {
+ tmp = FPSCR_INIT;
+ } else {
+ tmp = 0xffffffffUL; /* matches initial value in fpu.c */
+ }
+ return tmp;
+ }
+
+ if (last_task_used_math == task) {
+ grab_fpu();
+ fpsave(&task->thread.fpu.hard);
+ release_fpu();
+ last_task_used_math = 0;
+ regs->sr |= SR_FD;
+ }
+
+ tmp = ((long *)&task->thread.fpu)[addr / sizeof(unsigned long)];
+ return tmp;
+}
+
+/*
+ * This routine will put a word into the user area in the process kernel stack.
+ */
+static inline int put_stack_long(struct task_struct *task, int offset,
+ unsigned long data)
+{
+ unsigned char *stack;
+
+ stack = (unsigned char *)(task->thread.uregs);
+ stack += offset;
+ *(unsigned long *) stack = data;
+ return 0;
+}
+
+static inline int
+put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
+{
+ struct pt_regs *regs;
+
+ regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
+
+ if (!tsk_used_math(task)) {
+ fpinit(&task->thread.fpu.hard);
+ set_stopped_child_used_math(task);
+ } else if (last_task_used_math == task) {
+ grab_fpu();
+ fpsave(&task->thread.fpu.hard);
+ release_fpu();
+ last_task_used_math = 0;
+ regs->sr |= SR_FD;
+ }
+
+ ((long *)&task->thread.fpu)[addr / sizeof(unsigned long)] = data;
+ return 0;
+}
+
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+{
+ struct task_struct *child;
+ extern void poke_real_address_q(unsigned long long addr, unsigned long long data);
+#define WPC_DBRMODE 0x0d104008
+ static int first_call = 1;
+ int ret;
+
+ lock_kernel();
+
+ if (first_call) {
+ /* Set WPC.DBRMODE to 0. This makes all debug events get
+ * delivered through RESVEC, i.e. into the handlers in entry.S.
+ * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE
+ * would normally be left set to 1, which makes debug events get
+ * delivered through DBRVEC, i.e. into the remote gdb's
+ * handlers. This prevents ptrace getting them, and confuses
+ * the remote gdb.) */
+ printk("DBRMODE set to 0 to permit native debugging\n");
+ poke_real_address_q(WPC_DBRMODE, 0);
+ first_call = 0;
+ }
+
+ ret = -EPERM;
+ if (request == PTRACE_TRACEME) {
+ /* are we already being traced? */
+ if (current->ptrace & PT_PTRACED)
+ goto out;
+ /* set the ptrace bit in the process flags. */
+ current->ptrace |= PT_PTRACED;
+ ret = 0;
+ goto out;
+ }
+ ret = -ESRCH;
+ read_lock(&tasklist_lock);
+ child = find_task_by_pid(pid);
+ if (child)
+ get_task_struct(child);
+ read_unlock(&tasklist_lock);
+ if (!child)
+ goto out;
+
+ ret = -EPERM;
+ if (pid == 1) /* you may not mess with init */
+ goto out_tsk;
+
+ if (request == PTRACE_ATTACH) {
+ ret = ptrace_attach(child);
+ goto out_tsk;
+ }
+
+ ret = ptrace_check_attach(child, request == PTRACE_KILL);
+ if (ret < 0)
+ goto out_tsk;
+
+ switch (request) {
+ /* when I and D space are separate, these will need to be fixed. */
+ case PTRACE_PEEKTEXT: /* read word at location addr. */
+ case PTRACE_PEEKDATA: {
+ unsigned long tmp;
+ int copied;
+
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ ret = -EIO;
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp,(unsigned long *) data);
+ break;
+ }
+
+ /* read the word at location addr in the USER area. */
+ case PTRACE_PEEKUSR: {
+ unsigned long tmp;
+
+ ret = -EIO;
+ if ((addr & 3) || addr < 0)
+ break;
+
+ if (addr < sizeof(struct pt_regs))
+ tmp = get_stack_long(child, addr);
+ else if ((addr >= offsetof(struct user, fpu)) &&
+ (addr < offsetof(struct user, u_fpvalid))) {
+ tmp = get_fpu_long(child, addr - offsetof(struct user, fpu));
+ } else if (addr == offsetof(struct user, u_fpvalid)) {
+ tmp = !!tsk_used_math(child);
+ } else {
+ break;
+ }
+ ret = put_user(tmp, (unsigned long *)data);
+ break;
+ }
+
+ /* when I and D space are separate, this will have to be fixed. */
+ case PTRACE_POKETEXT: /* write the word at location addr. */
+ case PTRACE_POKEDATA:
+ ret = 0;
+ if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
+ break;
+ ret = -EIO;
+ break;
+
+ case PTRACE_POKEUSR:
+ /* write the word at location addr in the USER area. We must
+ disallow any changes to certain SR bits or u_fpvalid, since
+ this could crash the kernel or result in a security
+ loophole. */
+ ret = -EIO;
+ if ((addr & 3) || addr < 0)
+ break;
+
+ if (addr < sizeof(struct pt_regs)) {
+ /* Ignore change of top 32 bits of SR */
+ if (addr == offsetof (struct pt_regs, sr)+4)
+ {
+ ret = 0;
+ break;
+ }
+ /* If lower 32 bits of SR, ignore non-user bits */
+ if (addr == offsetof (struct pt_regs, sr))
+ {
+ long cursr = get_stack_long(child, addr);
+ data &= ~(SR_MASK);
+ data |= (cursr & SR_MASK);
+ }
+ ret = put_stack_long(child, addr, data);
+ }
+ else if ((addr >= offsetof(struct user, fpu)) &&
+ (addr < offsetof(struct user, u_fpvalid))) {
+ ret = put_fpu_long(child, addr - offsetof(struct user, fpu), data);
+ }
+ break;
+
+ case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
+ case PTRACE_CONT: { /* restart after signal. */
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ child->exit_code = data;
+ wake_up_process(child);
+ ret = 0;
+ break;
+ }
+
+/*
+ * make the child exit. Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
+ * exit.
+ */
+ case PTRACE_KILL: {
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ wake_up_process(child);
+ break;
+ }
+
+ case PTRACE_SINGLESTEP: { /* set the trap flag. */
+ struct pt_regs *regs;
+
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ if ((child->ptrace & PT_DTRACE) == 0) {
+ /* Spurious delayed TF traps may occur */
+ child->ptrace |= PT_DTRACE;
+ }
+
+ regs = child->thread.uregs;
+
+ regs->sr |= SR_SSTEP; /* auto-resetting upon exception */
+
+ child->exit_code = data;
+ /* give it a chance to run. */
+ wake_up_process(child);
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_DETACH: /* detach a process that was attached. */
+ ret = ptrace_detach(child, data);
+ break;
+
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+out_tsk:
+ put_task_struct(child);
+out:
+ unlock_kernel();
+ return ret;
+}
+
+asmlinkage void syscall_trace(void)
+{
+ struct task_struct *tsk = current;
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+ if (!(tsk->ptrace & PT_PTRACED))
+ return;
+
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (tsk->exit_code) {
+ send_sig(tsk->exit_code, tsk, 1);
+ tsk->exit_code = 0;
+ }
+}
+
+/* Called with interrupts disabled */
+asmlinkage void do_single_step(unsigned long long vec, struct pt_regs *regs)
+{
+ /* This is called after a single step exception (DEBUGSS).
+ There is no need to change the PC, as it is a post-execution
+ exception, as entry.S does not do anything to the PC for DEBUGSS.
+ We need to clear the Single Step setting in SR to avoid
+ continually stepping. */
+ local_irq_enable();
+ regs->sr &= ~SR_SSTEP;
+ force_sig(SIGTRAP, current);
+}
+
+/* Called with interrupts disabled */
+asmlinkage void do_software_break_point(unsigned long long vec,
+ struct pt_regs *regs)
+{
+ /* We need to forward step the PC, to counteract the backstep done
+ in signal.c. */
+ local_irq_enable();
+ force_sig(SIGTRAP, current);
+ regs->pc += 4;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure single step bits etc are not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+ /* nothing to do.. */
+}
diff --git a/arch/sh64/kernel/semaphore.c b/arch/sh64/kernel/semaphore.c
new file mode 100644
index 000000000000..72c16533436e
--- /dev/null
+++ b/arch/sh64/kernel/semaphore.c
@@ -0,0 +1,140 @@
+/*
+ * Just taken from alpha implementation.
+ * This can't work well, perhaps.
+ */
+/*
+ * Generic semaphore code. Buyer beware. Do your own
+ * specific changes in <asm/semaphore-helper.h>
+ */
+
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/init.h>
+#include <asm/semaphore.h>
+#include <asm/semaphore-helper.h>
+
+spinlock_t semaphore_wake_lock;
+
+/*
+ * Semaphores are implemented using a two-way counter:
+ * The "count" variable is decremented for each process
+ * that tries to sleep, while the "waking" variable is
+ * incremented when the "up()" code goes to wake up waiting
+ * processes.
+ *
+ * Notably, the inline "up()" and "down()" functions can
+ * efficiently test if they need to do any extra work (up
+ * needs to do something only if count was negative before
+ * the increment operation.
+ *
+ * waking_non_zero() (from asm/semaphore.h) must execute
+ * atomically.
+ *
+ * When __up() is called, the count was negative before
+ * incrementing it, and we need to wake up somebody.
+ *
+ * This routine adds one to the count of processes that need to
+ * wake up and exit. ALL waiting processes actually wake up but
+ * only the one that gets to the "waking" field first will gate
+ * through and acquire the semaphore. The others will go back
+ * to sleep.
+ *
+ * Note that these functions are only called when there is
+ * contention on the lock, and as such all this is the
+ * "non-critical" part of the whole semaphore business. The
+ * critical part is the inline stuff in <asm/semaphore.h>
+ * where we want to avoid any extra jumps and calls.
+ */
+void __up(struct semaphore *sem)
+{
+ wake_one_more(sem);
+ wake_up(&sem->wait);
+}
+
+/*
+ * Perform the "down" function. Return zero for semaphore acquired,
+ * return negative for signalled out of the function.
+ *
+ * If called from __down, the return is ignored and the wait loop is
+ * not interruptible. This means that a task waiting on a semaphore
+ * using "down()" cannot be killed until someone does an "up()" on
+ * the semaphore.
+ *
+ * If called from __down_interruptible, the return value gets checked
+ * upon return. If the return value is negative then the task continues
+ * with the negative value in the return register (it can be tested by
+ * the caller).
+ *
+ * Either form may be used in conjunction with "up()".
+ *
+ */
+
+#define DOWN_VAR \
+ struct task_struct *tsk = current; \
+ wait_queue_t wait; \
+ init_waitqueue_entry(&wait, tsk);
+
+#define DOWN_HEAD(task_state) \
+ \
+ \
+ tsk->state = (task_state); \
+ add_wait_queue(&sem->wait, &wait); \
+ \
+ /* \
+ * Ok, we're set up. sem->count is known to be less than zero \
+ * so we must wait. \
+ * \
+ * We can let go the lock for purposes of waiting. \
+ * We re-acquire it after awaking so as to protect \
+ * all semaphore operations. \
+ * \
+ * If "up()" is called before we call waking_non_zero() then \
+ * we will catch it right away. If it is called later then \
+ * we will have to go through a wakeup cycle to catch it. \
+ * \
+ * Multiple waiters contend for the semaphore lock to see \
+ * who gets to gate through and who has to wait some more. \
+ */ \
+ for (;;) {
+
+#define DOWN_TAIL(task_state) \
+ tsk->state = (task_state); \
+ } \
+ tsk->state = TASK_RUNNING; \
+ remove_wait_queue(&sem->wait, &wait);
+
+void __sched __down(struct semaphore * sem)
+{
+ DOWN_VAR
+ DOWN_HEAD(TASK_UNINTERRUPTIBLE)
+ if (waking_non_zero(sem))
+ break;
+ schedule();
+ DOWN_TAIL(TASK_UNINTERRUPTIBLE)
+}
+
+int __sched __down_interruptible(struct semaphore * sem)
+{
+ int ret = 0;
+ DOWN_VAR
+ DOWN_HEAD(TASK_INTERRUPTIBLE)
+
+ ret = waking_non_zero_interruptible(sem, tsk);
+ if (ret)
+ {
+ if (ret == 1)
+ /* ret != 0 only if we get interrupted -arca */
+ ret = 0;
+ break;
+ }
+ schedule();
+ DOWN_TAIL(TASK_INTERRUPTIBLE)
+ return ret;
+}
+
+int __down_trylock(struct semaphore * sem)
+{
+ return waking_non_zero_trylock(sem);
+}
diff --git a/arch/sh64/kernel/setup.c b/arch/sh64/kernel/setup.c
new file mode 100644
index 000000000000..c7a7b816a30f
--- /dev/null
+++ b/arch/sh64/kernel/setup.c
@@ -0,0 +1,385 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/setup.c
+ *
+ * sh64 Arch Support
+ *
+ * This file handles the architecture-dependent parts of initialization
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003, 2004 Paul Mundt
+ *
+ * benedict.gaster@superh.com: 2nd May 2002
+ * Modified to use the empty_zero_page to pass command line arguments.
+ *
+ * benedict.gaster@superh.com: 3rd May 2002
+ * Added support for ramdisk, removing statically linked romfs at the same time.
+ *
+ * lethal@linux-sh.org: 15th May 2003
+ * Added generic procfs cpuinfo reporting. Make boards just export their name.
+ *
+ * lethal@linux-sh.org: 25th May 2003
+ * Added generic get_cpu_subtype() for subtype reporting from cpu_data->type.
+ *
+ */
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/blkdev.h>
+#include <linux/bootmem.h>
+#include <linux/console.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/initrd.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/platform.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_VT
+#include <linux/console.h>
+#endif
+
+struct screen_info screen_info;
+
+#ifdef CONFIG_BLK_DEV_RAM
+extern int rd_doload; /* 1 = load ramdisk, 0 = don't load */
+extern int rd_prompt; /* 1 = prompt for ramdisk, 0 = don't prompt */
+extern int rd_image_start; /* starting block # of image */
+#endif
+
+extern int root_mountflags;
+extern char *get_system_type(void);
+extern void platform_setup(void);
+extern void platform_monitor(void);
+extern void platform_reserve(void);
+extern int sh64_cache_init(void);
+extern int sh64_tlb_init(void);
+
+#define RAMDISK_IMAGE_START_MASK 0x07FF
+#define RAMDISK_PROMPT_FLAG 0x8000
+#define RAMDISK_LOAD_FLAG 0x4000
+
+static char command_line[COMMAND_LINE_SIZE] = { 0, };
+unsigned long long memory_start = CONFIG_MEMORY_START;
+unsigned long long memory_end = CONFIG_MEMORY_START + (CONFIG_MEMORY_SIZE_IN_MB * 1024 * 1024);
+
+struct sh_cpuinfo boot_cpu_data;
+
+static inline void parse_mem_cmdline (char ** cmdline_p)
+{
+ char c = ' ', *to = command_line, *from = COMMAND_LINE;
+ int len = 0;
+
+ /* Save unparsed command line copy for /proc/cmdline */
+ memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+ saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+
+ for (;;) {
+ /*
+ * "mem=XXX[kKmM]" defines a size of memory.
+ */
+ if (c == ' ' && !memcmp(from, "mem=", 4)) {
+ if (to != command_line)
+ to--;
+ {
+ unsigned long mem_size;
+
+ mem_size = memparse(from+4, &from);
+ memory_end = memory_start + mem_size;
+ }
+ }
+ c = *(from++);
+ if (!c)
+ break;
+ if (COMMAND_LINE_SIZE <= ++len)
+ break;
+ *(to++) = c;
+ }
+ *to = '\0';
+
+ *cmdline_p = command_line;
+}
+
+static void __init sh64_cpu_type_detect(void)
+{
+ extern unsigned long long peek_real_address_q(unsigned long long addr);
+ unsigned long long cir;
+ /* Do peeks in real mode to avoid having to set up a mapping for the
+ WPC registers. On SH5-101 cut2, such a mapping would be exposed to
+ an address translation erratum which would make it hard to set up
+ correctly. */
+ cir = peek_real_address_q(0x0d000008);
+
+ if ((cir & 0xffff) == 0x5103) {
+ boot_cpu_data.type = CPU_SH5_103;
+ } else if (((cir >> 32) & 0xffff) == 0x51e2) {
+ /* CPU.VCR aliased at CIR address on SH5-101 */
+ boot_cpu_data.type = CPU_SH5_101;
+ } else {
+ boot_cpu_data.type = CPU_SH_NONE;
+ }
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ unsigned long bootmap_size, i;
+ unsigned long first_pfn, start_pfn, last_pfn, pages;
+
+#ifdef CONFIG_EARLY_PRINTK
+ extern void enable_early_printk(void);
+
+ /*
+ * Setup Early SCIF console
+ */
+ enable_early_printk();
+#endif
+
+ /*
+ * Setup TLB mappings
+ */
+ sh64_tlb_init();
+
+ /*
+ * Caches are already initialized by the time we get here, so we just
+ * fill in cpu_data info for the caches.
+ */
+ sh64_cache_init();
+
+ platform_setup();
+ platform_monitor();
+
+ sh64_cpu_type_detect();
+
+ ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+
+#ifdef CONFIG_BLK_DEV_RAM
+ rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+ rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+ rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+
+ if (!MOUNT_ROOT_RDONLY)
+ root_mountflags &= ~MS_RDONLY;
+ init_mm.start_code = (unsigned long) _text;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = (unsigned long) _end;
+
+ code_resource.start = __pa(_text);
+ code_resource.end = __pa(_etext)-1;
+ data_resource.start = __pa(_etext);
+ data_resource.end = __pa(_edata)-1;
+
+ parse_mem_cmdline(cmdline_p);
+
+ /*
+ * Find the lowest and highest page frame numbers we have available
+ */
+ first_pfn = PFN_DOWN(memory_start);
+ last_pfn = PFN_DOWN(memory_end);
+ pages = last_pfn - first_pfn;
+
+ /*
+ * Partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+ start_pfn = PFN_UP(__pa(_end));
+
+ /*
+ * Find a proper area for the bootmem bitmap. After this
+ * bootstrap step all allocations (until the page allocator
+ * is intact) must be done via bootmem_alloc().
+ */
+ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
+ first_pfn,
+ last_pfn);
+ /*
+ * Round it up.
+ */
+ bootmap_size = PFN_PHYS(PFN_UP(bootmap_size));
+
+ /*
+ * Register fully available RAM pages with the bootmem allocator.
+ */
+ free_bootmem_node(NODE_DATA(0), PFN_PHYS(first_pfn), PFN_PHYS(pages));
+
+ /*
+ * Reserve all kernel sections + bootmem bitmap + a guard page.
+ */
+ reserve_bootmem_node(NODE_DATA(0), PFN_PHYS(first_pfn),
+ (PFN_PHYS(start_pfn) + bootmap_size + PAGE_SIZE) - PFN_PHYS(first_pfn));
+
+ /*
+ * Reserve platform dependent sections
+ */
+ platform_reserve();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (LOADER_TYPE && INITRD_START) {
+ if (INITRD_START + INITRD_SIZE <= (PFN_PHYS(last_pfn))) {
+ reserve_bootmem_node(NODE_DATA(0), INITRD_START + __MEMORY_START, INITRD_SIZE);
+
+ initrd_start =
+ (long) INITRD_START ? INITRD_START + PAGE_OFFSET + __MEMORY_START : 0;
+
+ initrd_end = initrd_start + INITRD_SIZE;
+ } else {
+ printk("initrd extends beyond end of memory "
+ "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+ (long) INITRD_START + INITRD_SIZE,
+ PFN_PHYS(last_pfn));
+ initrd_start = 0;
+ }
+ }
+#endif
+
+ /*
+ * Claim all RAM, ROM, and I/O resources.
+ */
+
+ /* Kernel RAM */
+ request_resource(&iomem_resource, &code_resource);
+ request_resource(&iomem_resource, &data_resource);
+
+ /* Other KRAM space */
+ for (i = 0; i < STANDARD_KRAM_RESOURCES - 2; i++)
+ request_resource(&iomem_resource,
+ &platform_parms.kram_res_p[i]);
+
+ /* XRAM space */
+ for (i = 0; i < STANDARD_XRAM_RESOURCES; i++)
+ request_resource(&iomem_resource,
+ &platform_parms.xram_res_p[i]);
+
+ /* ROM space */
+ for (i = 0; i < STANDARD_ROM_RESOURCES; i++)
+ request_resource(&iomem_resource,
+ &platform_parms.rom_res_p[i]);
+
+ /* I/O space */
+ for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+ request_resource(&ioport_resource,
+ &platform_parms.io_res_p[i]);
+
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+
+ printk("Hardware FPU: %s\n", fpu_in_use ? "enabled" : "disabled");
+
+ paging_init();
+}
+
+void __xchg_called_with_bad_pointer(void)
+{
+ printk(KERN_EMERG "xchg() called with bad pointer !\n");
+}
+
+static struct cpu cpu[1];
+
+static int __init topology_init(void)
+{
+ return register_cpu(cpu, 0, NULL);
+}
+
+subsys_initcall(topology_init);
+
+/*
+ * Get CPU information
+ */
+static const char *cpu_name[] = {
+ [CPU_SH5_101] = "SH5-101",
+ [CPU_SH5_103] = "SH5-103",
+ [CPU_SH_NONE] = "Unknown",
+};
+
+const char *get_cpu_subtype(void)
+{
+ return cpu_name[boot_cpu_data.type];
+}
+
+#ifdef CONFIG_PROC_FS
+static int show_cpuinfo(struct seq_file *m,void *v)
+{
+ unsigned int cpu = smp_processor_id();
+
+ if (!cpu)
+ seq_printf(m, "machine\t\t: %s\n", get_system_type());
+
+ seq_printf(m, "processor\t: %d\n", cpu);
+ seq_printf(m, "cpu family\t: SH-5\n");
+ seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype());
+
+ seq_printf(m, "icache size\t: %dK-bytes\n",
+ (boot_cpu_data.icache.ways *
+ boot_cpu_data.icache.sets *
+ boot_cpu_data.icache.linesz) >> 10);
+ seq_printf(m, "dcache size\t: %dK-bytes\n",
+ (boot_cpu_data.dcache.ways *
+ boot_cpu_data.dcache.sets *
+ boot_cpu_data.dcache.linesz) >> 10);
+ seq_printf(m, "itlb entries\t: %d\n", boot_cpu_data.itlb.entries);
+ seq_printf(m, "dtlb entries\t: %d\n", boot_cpu_data.dtlb.entries);
+
+#define PRINT_CLOCK(name, value) \
+ seq_printf(m, name " clock\t: %d.%02dMHz\n", \
+ ((value) / 1000000), ((value) % 1000000)/10000)
+
+ PRINT_CLOCK("cpu", boot_cpu_data.cpu_clock);
+ PRINT_CLOCK("bus", boot_cpu_data.bus_clock);
+ PRINT_CLOCK("module", boot_cpu_data.module_clock);
+
+ seq_printf(m, "bogomips\t: %lu.%02lu\n\n",
+ (loops_per_jiffy*HZ+2500)/500000,
+ ((loops_per_jiffy*HZ+2500)/5000) % 100);
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return (void*)(*pos == 0);
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ return NULL;
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+#endif /* CONFIG_PROC_FS */
diff --git a/arch/sh64/kernel/sh_ksyms.c b/arch/sh64/kernel/sh_ksyms.c
new file mode 100644
index 000000000000..0b5497d70bd3
--- /dev/null
+++ b/arch/sh64/kernel/sh_ksyms.c
@@ -0,0 +1,89 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/sh_ksyms.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/rwsem.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/user.h>
+#include <linux/elfcore.h>
+#include <linux/sched.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/tty.h>
+
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+
+extern void dump_thread(struct pt_regs *, struct user *);
+extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
+
+#if 0
+/* Not yet - there's no declaration of drive_info anywhere. */
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
+extern struct drive_info_struct drive_info;
+EXPORT_SYMBOL(drive_info);
+#endif
+#endif
+
+/* platform dependent support */
+EXPORT_SYMBOL(dump_thread);
+EXPORT_SYMBOL(dump_fpu);
+EXPORT_SYMBOL(iounmap);
+EXPORT_SYMBOL(enable_irq);
+EXPORT_SYMBOL(disable_irq);
+EXPORT_SYMBOL(kernel_thread);
+
+/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial_copy);
+
+EXPORT_SYMBOL(strpbrk);
+EXPORT_SYMBOL(strstr);
+
+#ifdef CONFIG_VT
+EXPORT_SYMBOL(screen_info);
+#endif
+
+EXPORT_SYMBOL(__down);
+EXPORT_SYMBOL(__down_trylock);
+EXPORT_SYMBOL(__up);
+EXPORT_SYMBOL(__put_user_asm_l);
+EXPORT_SYMBOL(__get_user_asm_l);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memscan);
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strlen);
+
+EXPORT_SYMBOL(flush_dcache_page);
+
+/* For ext3 */
+EXPORT_SYMBOL(sh64_page_clear);
+
+/* Ugh. These come in from libgcc.a at link time. */
+
+extern void __sdivsi3(void);
+extern void __muldi3(void);
+extern void __udivsi3(void);
+extern char __div_table;
+EXPORT_SYMBOL(__sdivsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__div_table);
+
+
diff --git a/arch/sh64/kernel/signal.c b/arch/sh64/kernel/signal.c
new file mode 100644
index 000000000000..45ad1026dde7
--- /dev/null
+++ b/arch/sh64/kernel/signal.c
@@ -0,0 +1,727 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/signal.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * Started from sh version.
+ *
+ */
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+
+#define REG_RET 9
+#define REG_ARG1 2
+#define REG_ARG2 3
+#define REG_ARG3 4
+#define REG_SP 15
+#define REG_PR 18
+#define REF_REG_RET regs->regs[REG_RET]
+#define REF_REG_SP regs->regs[REG_SP]
+#define DEREF_REG_PR regs->regs[REG_PR]
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+
+asmlinkage int
+sys_sigsuspend(old_sigset_t mask,
+ unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs * regs)
+{
+ sigset_t saveset;
+
+ mask &= _BLOCKABLE;
+ spin_lock_irq(&current->sighand->siglock);
+ saveset = current->blocked;
+ siginitset(&current->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ REF_REG_RET = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ regs->pc += 4; /* because sys_sigreturn decrements the pc */
+ if (do_signal(regs, &saveset)) {
+ /* pc now points at signal handler. Need to decrement
+ it because entry.S will increment it. */
+ regs->pc -= 4;
+ return -EINTR;
+ }
+ }
+}
+
+asmlinkage int
+sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
+ unsigned long r4, unsigned long r5, unsigned long r6,
+ unsigned long r7,
+ struct pt_regs * regs)
+{
+ sigset_t saveset, newset;
+
+ /* XXX: Don't preclude handling different sized sigset_t's. */
+ if (sigsetsize != sizeof(sigset_t))
+ return -EINVAL;
+
+ if (copy_from_user(&newset, unewset, sizeof(newset)))
+ return -EFAULT;
+ sigdelsetmask(&newset, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ saveset = current->blocked;
+ current->blocked = newset;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ REF_REG_RET = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ regs->pc += 4; /* because sys_sigreturn decrements the pc */
+ if (do_signal(regs, &saveset)) {
+ /* pc now points at signal handler. Need to decrement
+ it because entry.S will increment it. */
+ regs->pc -= 4;
+ return -EINTR;
+ }
+ }
+}
+
+asmlinkage int
+sys_sigaction(int sig, const struct old_sigaction __user *act,
+ struct old_sigaction __user *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ int ret;
+
+ if (act) {
+ old_sigset_t mask;
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+asmlinkage int
+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+ unsigned long r4, unsigned long r5, unsigned long r6,
+ unsigned long r7,
+ struct pt_regs * regs)
+{
+ return do_sigaltstack(uss, uoss, REF_REG_SP);
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+struct sigframe
+{
+ struct sigcontext sc;
+ unsigned long extramask[_NSIG_WORDS-1];
+ long long retcode[2];
+};
+
+struct rt_sigframe
+{
+ struct siginfo __user *pinfo;
+ void *puc;
+ struct siginfo info;
+ struct ucontext uc;
+ long long retcode[2];
+};
+
+#ifdef CONFIG_SH_FPU
+static inline int
+restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+ int err = 0;
+ int fpvalid;
+
+ err |= __get_user (fpvalid, &sc->sc_fpvalid);
+ conditional_used_math(fpvalid);
+ if (! fpvalid)
+ return err;
+
+ if (current == last_task_used_math) {
+ last_task_used_math = NULL;
+ regs->sr |= SR_FD;
+ }
+
+ err |= __copy_from_user(&current->thread.fpu.hard, &sc->sc_fpregs[0],
+ (sizeof(long long) * 32) + (sizeof(int) * 1));
+
+ return err;
+}
+
+static inline int
+setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+ int err = 0;
+ int fpvalid;
+
+ fpvalid = !!used_math();
+ err |= __put_user(fpvalid, &sc->sc_fpvalid);
+ if (! fpvalid)
+ return err;
+
+ if (current == last_task_used_math) {
+ grab_fpu();
+ fpsave(&current->thread.fpu.hard);
+ release_fpu();
+ last_task_used_math = NULL;
+ regs->sr |= SR_FD;
+ }
+
+ err |= __copy_to_user(&sc->sc_fpregs[0], &current->thread.fpu.hard,
+ (sizeof(long long) * 32) + (sizeof(int) * 1));
+ clear_used_math();
+
+ return err;
+}
+#else
+static inline int
+restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
+{}
+static inline int
+setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
+{}
+#endif
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, long long *r2_p)
+{
+ unsigned int err = 0;
+ unsigned long long current_sr, new_sr;
+#define SR_MASK 0xffff8cfd
+
+#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x)
+
+ COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]);
+ COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]);
+ COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]);
+ COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]);
+ COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]);
+ COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]);
+ COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]);
+ COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]);
+ COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]);
+ COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]);
+ COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]);
+ COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]);
+ COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]);
+ COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]);
+ COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]);
+ COPY(regs[60]); COPY(regs[61]); COPY(regs[62]);
+ COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]);
+ COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]);
+
+ /* Prevent the signal handler manipulating SR in a way that can
+ crash the kernel. i.e. only allow S, Q, M, PR, SZ, FR to be
+ modified */
+ current_sr = regs->sr;
+ err |= __get_user(new_sr, &sc->sc_sr);
+ regs->sr &= SR_MASK;
+ regs->sr |= (new_sr & ~SR_MASK);
+
+ COPY(pc);
+
+#undef COPY
+
+ /* Must do this last in case it sets regs->sr.fd (i.e. after rest of sr
+ * has been restored above.) */
+ err |= restore_sigcontext_fpu(regs, sc);
+
+ regs->syscall_nr = -1; /* disable syscall checks */
+ err |= __get_user(*r2_p, &sc->sc_regs[REG_RET]);
+ return err;
+}
+
+asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3,
+ unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs * regs)
+{
+ struct sigframe __user *frame = (struct sigframe __user *) (long) REF_REG_SP;
+ sigset_t set;
+ long long ret;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+
+ if (__get_user(set.sig[0], &frame->sc.oldmask)
+ || (_NSIG_WORDS > 1
+ && __copy_from_user(&set.sig[1], &frame->extramask,
+ sizeof(frame->extramask))))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->sc, &ret))
+ goto badframe;
+ regs->pc -= 4;
+
+ return (int) ret;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
+ unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs * regs)
+{
+ struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP;
+ sigset_t set;
+ stack_t __user st;
+ long long ret;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ret))
+ goto badframe;
+ regs->pc -= 4;
+
+ if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
+ goto badframe;
+ /* It is more difficult to avoid calling this function than to
+ call it and ignore errors. */
+ do_sigaltstack(&st, NULL, REF_REG_SP);
+
+ return (int) ret;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+ unsigned long mask)
+{
+ int err = 0;
+
+ /* Do this first, otherwise is this sets sr->fd, that value isn't preserved. */
+ err |= setup_sigcontext_fpu(regs, sc);
+
+#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x)
+
+ COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]);
+ COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]);
+ COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]);
+ COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]);
+ COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]);
+ COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]);
+ COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]);
+ COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]);
+ COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]);
+ COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]);
+ COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]);
+ COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]);
+ COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]);
+ COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]);
+ COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]);
+ COPY(regs[60]); COPY(regs[61]); COPY(regs[62]);
+ COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]);
+ COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]);
+ COPY(sr); COPY(pc);
+
+#undef COPY
+
+ err |= __put_user(mask, &sc->oldmask);
+
+ return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
+{
+ if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! on_sig_stack(sp))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+
+ return (void __user *)((sp - frame_size) & -8ul);
+}
+
+void sa_default_restorer(void); /* See comments below */
+void sa_default_rt_restorer(void); /* See comments below */
+
+static void setup_frame(int sig, struct k_sigaction *ka,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct sigframe __user *frame;
+ int err = 0;
+ int signal;
+
+ frame = get_sigframe(ka, regs->regs[REG_SP], sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ signal = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
+
+ /* Give up earlier as i386, in case */
+ if (err)
+ goto give_sigsegv;
+
+ if (_NSIG_WORDS > 1) {
+ err |= __copy_to_user(frame->extramask, &set->sig[1],
+ sizeof(frame->extramask)); }
+
+ /* Give up earlier as i386, in case */
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up to return from userspace. If provided, use a stub
+ already in userspace. */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1;
+
+ /*
+ * On SH5 all edited pointers are subject to NEFF
+ */
+ DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
+ (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+ } else {
+ /*
+ * Different approach on SH5.
+ * . Endianness independent asm code gets placed in entry.S .
+ * This is limited to four ASM instructions corresponding
+ * to two long longs in size.
+ * . err checking is done on the else branch only
+ * . flush_icache_range() is called upon __put_user() only
+ * . all edited pointers are subject to NEFF
+ * . being code, linker turns ShMedia bit on, always
+ * dereference index -1.
+ */
+ DEREF_REG_PR = (unsigned long) frame->retcode | 0x01;
+ DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
+ (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+
+ if (__copy_to_user(frame->retcode,
+ (unsigned long long)sa_default_restorer & (~1), 16) != 0)
+ goto give_sigsegv;
+
+ /* Cohere the trampoline with the I-cache. */
+ flush_cache_sigtramp(DEREF_REG_PR-1, DEREF_REG_PR-1+16);
+ }
+
+ /*
+ * Set up registers for signal handler.
+ * All edited pointers are subject to NEFF.
+ */
+ regs->regs[REG_SP] = (unsigned long) frame;
+ regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ?
+ (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
+ regs->regs[REG_ARG1] = signal; /* Arg for signal handler */
+
+ /* FIXME:
+ The glibc profiling support for SH-5 needs to be passed a sigcontext
+ so it can retrieve the PC. At some point during 2003 the glibc
+ support was changed to receive the sigcontext through the 2nd
+ argument, but there are still versions of libc.so in use that use
+ the 3rd argument. Until libc.so is stabilised, pass the sigcontext
+ through both 2nd and 3rd arguments.
+ */
+
+ regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
+ regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
+
+ regs->pc = (unsigned long) ka->sa.sa_handler;
+ regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc;
+
+ set_fs(USER_DS);
+
+#if DEBUG_SIG
+ /* Broken %016Lx */
+ printk("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n",
+ signal,
+ current->comm, current->pid, frame,
+ regs->pc >> 32, regs->pc & 0xffffffff,
+ DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff);
+#endif
+
+ return;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+}
+
+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame;
+ int err = 0;
+ int signal;
+
+ frame = get_sigframe(ka, regs->regs[REG_SP], sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ signal = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ err |= __put_user(&frame->info, &frame->pinfo);
+ err |= __put_user(&frame->uc, &frame->puc);
+ err |= copy_siginfo_to_user(&frame->info, info);
+
+ /* Give up earlier as i386, in case */
+ if (err)
+ goto give_sigsegv;
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user((void *)current->sas_ss_sp,
+ &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(regs->regs[REG_SP]),
+ &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= setup_sigcontext(&frame->uc.uc_mcontext,
+ regs, set->sig[0]);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ /* Give up earlier as i386, in case */
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up to return from userspace. If provided, use a stub
+ already in userspace. */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1;
+
+ /*
+ * On SH5 all edited pointers are subject to NEFF
+ */
+ DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
+ (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+ } else {
+ /*
+ * Different approach on SH5.
+ * . Endianness independent asm code gets placed in entry.S .
+ * This is limited to four ASM instructions corresponding
+ * to two long longs in size.
+ * . err checking is done on the else branch only
+ * . flush_icache_range() is called upon __put_user() only
+ * . all edited pointers are subject to NEFF
+ * . being code, linker turns ShMedia bit on, always
+ * dereference index -1.
+ */
+
+ DEREF_REG_PR = (unsigned long) frame->retcode | 0x01;
+ DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
+ (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+
+ if (__copy_to_user(frame->retcode,
+ (unsigned long long)sa_default_rt_restorer & (~1), 16) != 0)
+ goto give_sigsegv;
+
+ flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15);
+ }
+
+ /*
+ * Set up registers for signal handler.
+ * All edited pointers are subject to NEFF.
+ */
+ regs->regs[REG_SP] = (unsigned long) frame;
+ regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ?
+ (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
+ regs->regs[REG_ARG1] = signal; /* Arg for signal handler */
+ regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info;
+ regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext;
+ regs->pc = (unsigned long) ka->sa.sa_handler;
+ regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc;
+
+ set_fs(USER_DS);
+
+#if DEBUG_SIG
+ /* Broken %016Lx */
+ printk("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n",
+ signal,
+ current->comm, current->pid, frame,
+ regs->pc >> 32, regs->pc & 0xffffffff,
+ DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff);
+#endif
+
+ return;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static void
+handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs * regs)
+{
+ /* Are we from a system call? */
+ if (regs->syscall_nr >= 0) {
+ /* If so, check system call restarting.. */
+ switch (regs->regs[REG_RET]) {
+ case -ERESTARTNOHAND:
+ regs->regs[REG_RET] = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->regs[REG_RET] = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ /* Decode syscall # */
+ regs->regs[REG_RET] = regs->syscall_nr;
+ regs->pc -= 4;
+ }
+ }
+
+ /* Set up the stack frame */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+ setup_frame(sig, ka, oldset, regs);
+
+ if (!(ka->sa.sa_flags & SA_NODEFER)) {
+ spin_lock_irq(&current->sighand->siglock);
+ sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
+ sigaddset(&current->blocked,sig);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+ }
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+int do_signal(struct pt_regs *regs, sigset_t *oldset)
+{
+ siginfo_t info;
+ int signr;
+ struct k_sigaction ka;
+
+ /*
+ * We want the common case to go fast, which
+ * is why we may in certain cases get here from
+ * kernel mode. Just return without doing anything
+ * if so.
+ */
+ if (!user_mode(regs))
+ return 1;
+
+ if (try_to_freeze(0))
+ goto no_signal;
+
+ if (!oldset)
+ oldset = &current->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, 0);
+
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ handle_signal(signr, &info, &ka, oldset, regs);
+ return 1;
+ }
+
+no_signal:
+ /* Did we come from a system call? */
+ if (regs->syscall_nr >= 0) {
+ /* Restart the system call - no handlers present */
+ if (regs->regs[REG_RET] == -ERESTARTNOHAND ||
+ regs->regs[REG_RET] == -ERESTARTSYS ||
+ regs->regs[REG_RET] == -ERESTARTNOINTR) {
+ /* Decode Syscall # */
+ regs->regs[REG_RET] = regs->syscall_nr;
+ regs->pc -= 4;
+ }
+ }
+ return 0;
+}
diff --git a/arch/sh64/kernel/switchto.S b/arch/sh64/kernel/switchto.S
new file mode 100644
index 000000000000..45b2d90eed7d
--- /dev/null
+++ b/arch/sh64/kernel/switchto.S
@@ -0,0 +1,198 @@
+/*
+ * arch/sh64/kernel/switchto.S
+ *
+ * sh64 context switch
+ *
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+*/
+
+ .section .text..SHmedia32,"ax"
+ .little
+
+ .balign 32
+
+ .type sh64_switch_to,@function
+ .global sh64_switch_to
+ .global __sh64_switch_to_end
+sh64_switch_to:
+
+/* Incoming args
+ r2 - prev
+ r3 - &prev->thread
+ r4 - next
+ r5 - &next->thread
+
+ Outgoing results
+ r2 - last (=prev) : this just stays in r2 throughout
+
+ Want to create a full (struct pt_regs) on the stack to allow backtracing
+ functions to work. However, we only need to populate the callee-save
+ register slots in this structure; since we're a function our ancestors must
+ have themselves preserved all caller saved state in the stack. This saves
+ some wasted effort since we won't need to look at the values.
+
+ In particular, all caller-save registers are immediately available for
+ scratch use.
+
+*/
+
+#define FRAME_SIZE (76*8 + 8)
+
+ movi FRAME_SIZE, r0
+ sub.l r15, r0, r15
+ ! Do normal-style register save to support backtrace
+
+ st.l r15, 0, r18 ! save link reg
+ st.l r15, 4, r14 ! save fp
+ add.l r15, r63, r14 ! setup frame pointer
+
+ ! hopefully this looks normal to the backtrace now.
+
+ addi.l r15, 8, r1 ! base of pt_regs
+ addi.l r1, 24, r0 ! base of pt_regs.regs
+ addi.l r0, (63*8), r8 ! base of pt_regs.trregs
+
+ /* Note : to be fixed?
+ struct pt_regs is really designed for holding the state on entry
+ to an exception, i.e. pc,sr,regs etc. However, for the context
+ switch state, some of this is not required. But the unwinder takes
+ struct pt_regs * as an arg so we have to build this structure
+ to allow unwinding switched tasks in show_state() */
+
+ st.q r0, ( 9*8), r9
+ st.q r0, (10*8), r10
+ st.q r0, (11*8), r11
+ st.q r0, (12*8), r12
+ st.q r0, (13*8), r13
+ st.q r0, (14*8), r14 ! for unwind, want to look as though we took a trap at
+ ! the point where the process is left in suspended animation, i.e. current
+ ! fp here, not the saved one.
+ st.q r0, (16*8), r16
+
+ st.q r0, (24*8), r24
+ st.q r0, (25*8), r25
+ st.q r0, (26*8), r26
+ st.q r0, (27*8), r27
+ st.q r0, (28*8), r28
+ st.q r0, (29*8), r29
+ st.q r0, (30*8), r30
+ st.q r0, (31*8), r31
+ st.q r0, (32*8), r32
+ st.q r0, (33*8), r33
+ st.q r0, (34*8), r34
+ st.q r0, (35*8), r35
+
+ st.q r0, (44*8), r44
+ st.q r0, (45*8), r45
+ st.q r0, (46*8), r46
+ st.q r0, (47*8), r47
+ st.q r0, (48*8), r48
+ st.q r0, (49*8), r49
+ st.q r0, (50*8), r50
+ st.q r0, (51*8), r51
+ st.q r0, (52*8), r52
+ st.q r0, (53*8), r53
+ st.q r0, (54*8), r54
+ st.q r0, (55*8), r55
+ st.q r0, (56*8), r56
+ st.q r0, (57*8), r57
+ st.q r0, (58*8), r58
+ st.q r0, (59*8), r59
+
+ ! do this early as pta->gettr has no pipeline forwarding (=> 5 cycle latency)
+ ! Use a local label to avoid creating a symbol that will confuse the !
+ ! backtrace
+ pta .Lsave_pc, tr0
+
+ gettr tr5, r45
+ gettr tr6, r46
+ gettr tr7, r47
+ st.q r8, (5*8), r45
+ st.q r8, (6*8), r46
+ st.q r8, (7*8), r47
+
+ ! Now switch context
+ gettr tr0, r9
+ st.l r3, 0, r15 ! prev->thread.sp
+ st.l r3, 8, r1 ! prev->thread.kregs
+ st.l r3, 4, r9 ! prev->thread.pc
+ st.q r1, 0, r9 ! save prev->thread.pc into pt_regs->pc
+
+ ! Load PC for next task (init value or save_pc later)
+ ld.l r5, 4, r18 ! next->thread.pc
+ ! Switch stacks
+ ld.l r5, 0, r15 ! next->thread.sp
+ ptabs r18, tr0
+
+ ! Update current
+ ld.l r4, 4, r9 ! next->thread_info (2nd element of next task_struct)
+ putcon r9, kcr0 ! current = next->thread_info
+
+ ! go to save_pc for a reschedule, or the initial thread.pc for a new process
+ blink tr0, r63
+
+ ! Restore (when we come back to a previously saved task)
+.Lsave_pc:
+ addi.l r15, 32, r0 ! r0 = next's regs
+ addi.l r0, (63*8), r8 ! r8 = next's tr_regs
+
+ ld.q r8, (5*8), r45
+ ld.q r8, (6*8), r46
+ ld.q r8, (7*8), r47
+ ptabs r45, tr5
+ ptabs r46, tr6
+ ptabs r47, tr7
+
+ ld.q r0, ( 9*8), r9
+ ld.q r0, (10*8), r10
+ ld.q r0, (11*8), r11
+ ld.q r0, (12*8), r12
+ ld.q r0, (13*8), r13
+ ld.q r0, (14*8), r14
+ ld.q r0, (16*8), r16
+
+ ld.q r0, (24*8), r24
+ ld.q r0, (25*8), r25
+ ld.q r0, (26*8), r26
+ ld.q r0, (27*8), r27
+ ld.q r0, (28*8), r28
+ ld.q r0, (29*8), r29
+ ld.q r0, (30*8), r30
+ ld.q r0, (31*8), r31
+ ld.q r0, (32*8), r32
+ ld.q r0, (33*8), r33
+ ld.q r0, (34*8), r34
+ ld.q r0, (35*8), r35
+
+ ld.q r0, (44*8), r44
+ ld.q r0, (45*8), r45
+ ld.q r0, (46*8), r46
+ ld.q r0, (47*8), r47
+ ld.q r0, (48*8), r48
+ ld.q r0, (49*8), r49
+ ld.q r0, (50*8), r50
+ ld.q r0, (51*8), r51
+ ld.q r0, (52*8), r52
+ ld.q r0, (53*8), r53
+ ld.q r0, (54*8), r54
+ ld.q r0, (55*8), r55
+ ld.q r0, (56*8), r56
+ ld.q r0, (57*8), r57
+ ld.q r0, (58*8), r58
+ ld.q r0, (59*8), r59
+
+ ! epilogue
+ ld.l r15, 0, r18
+ ld.l r15, 4, r14
+ ptabs r18, tr0
+ movi FRAME_SIZE, r0
+ add r15, r0, r15
+ blink tr0, r63
+__sh64_switch_to_end:
+.LFE1:
+ .size sh64_switch_to,.LFE1-sh64_switch_to
+
diff --git a/arch/sh64/kernel/sys_sh64.c b/arch/sh64/kernel/sys_sh64.c
new file mode 100644
index 000000000000..4546845b9caf
--- /dev/null
+++ b/arch/sh64/kernel/sys_sh64.c
@@ -0,0 +1,300 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/sys_sh64.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/SH5
+ * platform.
+ *
+ * Mostly taken from i386 version.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+#include <linux/syscalls.h>
+#include <asm/uaccess.h>
+#include <asm/ipc.h>
+#include <asm/ptrace.h>
+
+#define REG_3 3
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+#ifdef NEW_PIPE_IMPLEMENTATION
+asmlinkage int sys_pipe(unsigned long * fildes,
+ unsigned long dummy_r3,
+ unsigned long dummy_r4,
+ unsigned long dummy_r5,
+ unsigned long dummy_r6,
+ unsigned long dummy_r7,
+ struct pt_regs * regs) /* r8 = pt_regs forced by entry.S */
+{
+ int fd[2];
+ int ret;
+
+ ret = do_pipe(fd);
+ if (ret == 0)
+ /*
+ ***********************************************************************
+ * To avoid the copy_to_user we prefer to break the ABIs convention, *
+ * packing the valid pair of file IDs into a single register (r3); *
+ * while r2 is the return code as defined by the sh5-ABIs. *
+ * BE CAREFUL: pipe stub, into glibc, must be aware of this solution *
+ ***********************************************************************
+
+#ifdef __LITTLE_ENDIAN__
+ regs->regs[REG_3] = (((unsigned long long) fd[1]) << 32) | ((unsigned long long) fd[0]);
+#else
+ regs->regs[REG_3] = (((unsigned long long) fd[0]) << 32) | ((unsigned long long) fd[1]);
+#endif
+
+ */
+ /* although not very clever this is endianess independent */
+ regs->regs[REG_3] = (unsigned long long) *((unsigned long long *) fd);
+
+ return ret;
+}
+
+#else
+asmlinkage int sys_pipe(unsigned long * fildes)
+{
+ int fd[2];
+ int error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(fildes, fd, 2*sizeof(int)))
+ error = -EFAULT;
+ }
+ return error;
+}
+
+#endif
+
+/*
+ * To avoid cache alias, we map the shard page with same color.
+ */
+#define COLOUR_ALIGN(addr) (((addr)+SHMLBA-1)&~(SHMLBA-1))
+
+unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct vm_area_struct *vma;
+
+ if (flags & MAP_FIXED) {
+ /* We do not accept a shared mapping if it would violate
+ * cache aliasing constraints.
+ */
+ if ((flags & MAP_SHARED) && (addr & (SHMLBA - 1)))
+ return -EINVAL;
+ return addr;
+ }
+
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+ if (!addr)
+ addr = TASK_UNMAPPED_BASE;
+
+ if (flags & MAP_PRIVATE)
+ addr = PAGE_ALIGN(addr);
+ else
+ addr = COLOUR_ALIGN(addr);
+
+ for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {
+ /* At this point: (!vma || addr < vma->vm_end). */
+ if (TASK_SIZE - len < addr)
+ return -ENOMEM;
+ if (!vma || addr + len <= vma->vm_start)
+ return addr;
+ addr = vma->vm_end;
+ if (!(flags & MAP_PRIVATE))
+ addr = COLOUR_ALIGN(addr);
+ }
+}
+
+/* common code for old and new mmaps */
+static inline long do_mmap2(
+ unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ int error = -EBADF;
+ struct file * file = NULL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(&current->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(&current->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return error;
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ return do_mmap2(addr, len, prot, flags, fd, pgoff);
+}
+
+asmlinkage int old_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ int fd, unsigned long off)
+{
+ if (off & ~PAGE_MASK)
+ return -EINVAL;
+ return do_mmap2(addr, len, prot, flags, fd, off>>PAGE_SHIFT);
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage int sys_ipc(uint call, int first, int second,
+ int third, void __user *ptr, long fifth)
+{
+ int version, ret;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ if (call <= SEMCTL)
+ switch (call) {
+ case SEMOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr,
+ second, NULL);
+ case SEMTIMEDOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr,
+ second,
+ (const struct timespec __user *)fifth);
+ case SEMGET:
+ return sys_semget (first, second, third);
+ case SEMCTL: {
+ union semun fourth;
+ if (!ptr)
+ return -EINVAL;
+ if (get_user(fourth.__pad, (void * __user *) ptr))
+ return -EFAULT;
+ return sys_semctl (first, second, third, fourth);
+ }
+ default:
+ return -EINVAL;
+ }
+
+ if (call <= MSGCTL)
+ switch (call) {
+ case MSGSND:
+ return sys_msgsnd (first, (struct msgbuf __user *) ptr,
+ second, third);
+ case MSGRCV:
+ switch (version) {
+ case 0: {
+ struct ipc_kludge tmp;
+ if (!ptr)
+ return -EINVAL;
+
+ if (copy_from_user(&tmp,
+ (struct ipc_kludge __user *) ptr,
+ sizeof (tmp)))
+ return -EFAULT;
+ return sys_msgrcv (first, tmp.msgp, second,
+ tmp.msgtyp, third);
+ }
+ default:
+ return sys_msgrcv (first,
+ (struct msgbuf __user *) ptr,
+ second, fifth, third);
+ }
+ case MSGGET:
+ return sys_msgget ((key_t) first, second);
+ case MSGCTL:
+ return sys_msgctl (first, second,
+ (struct msqid_ds __user *) ptr);
+ default:
+ return -EINVAL;
+ }
+ if (call <= SHMCTL)
+ switch (call) {
+ case SHMAT:
+ switch (version) {
+ default: {
+ ulong raddr;
+ ret = do_shmat (first, (char __user *) ptr,
+ second, &raddr);
+ if (ret)
+ return ret;
+ return put_user (raddr, (ulong __user *) third);
+ }
+ case 1: /* iBCS2 emulator entry point */
+ if (!segment_eq(get_fs(), get_ds()))
+ return -EINVAL;
+ return do_shmat (first, (char __user *) ptr,
+ second, (ulong *) third);
+ }
+ case SHMDT:
+ return sys_shmdt ((char __user *)ptr);
+ case SHMGET:
+ return sys_shmget (first, second, third);
+ case SHMCTL:
+ return sys_shmctl (first, second,
+ (struct shmid_ds __user *) ptr);
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+asmlinkage int sys_uname(struct old_utsname * name)
+{
+ int err;
+ if (!name)
+ return -EFAULT;
+ down_read(&uts_sem);
+ err=copy_to_user(name, &system_utsname, sizeof (*name));
+ up_read(&uts_sem);
+ return err?-EFAULT:0;
+}
+
+/* Copy from mips version */
+asmlinkage long sys_shmatcall(int shmid, char __user *shmaddr,
+ int shmflg)
+{
+ unsigned long raddr;
+ int err;
+
+ err = do_shmat(shmid, shmaddr, shmflg, &raddr);
+ if (err)
+ return err;
+
+ err = raddr;
+ return err;
+}
diff --git a/arch/sh64/kernel/syscalls.S b/arch/sh64/kernel/syscalls.S
new file mode 100644
index 000000000000..8ed417df3dc6
--- /dev/null
+++ b/arch/sh64/kernel/syscalls.S
@@ -0,0 +1,345 @@
+/*
+ * arch/sh64/kernel/syscalls.S
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2003, 2004 Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+
+ .section .data, "aw"
+ .balign 32
+
+/*
+ * System calls jump table
+ */
+ .globl sys_call_table
+sys_call_table:
+ .long sys_ni_syscall /* 0 - old "setup()" system call */
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys( */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* sys_olduname */
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long sys_ni_syscall /* sys_oldselect */
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* ioperm */
+ .long sys_socketcall /* Obsolete implementation of socket syscall */
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_uname
+ .long sys_ni_syscall /* 110 */ /* iopl */
+ .long sys_vhangup
+ .long sys_ni_syscall /* idle */
+ .long sys_ni_syscall /* vm86old */
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc /* Obsolete ipc syscall implementation */
+ .long sys_fsync
+ .long sys_sigreturn
+ .long sys_clone /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_ni_syscall /* sys_modify_ldt */
+ .long sys_adjtimex
+ .long sys_mprotect /* 125 */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_ni_syscall /* vm86 */
+ .long sys_ni_syscall /* old "query_module" */
+ .long sys_poll
+ .long sys_nfsservctl
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_chown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* streams1 */
+ .long sys_ni_syscall /* streams2 */
+ .long sys_vfork /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ /* Broken-out socket family (maintain backwards compatibility in syscall
+ numbering with 2.4) */
+ .long sys_socket /* 220 */
+ .long sys_bind
+ .long sys_connect
+ .long sys_listen
+ .long sys_accept
+ .long sys_getsockname /* 225 */
+ .long sys_getpeername
+ .long sys_socketpair
+ .long sys_send
+ .long sys_sendto
+ .long sys_recv /* 230*/
+ .long sys_recvfrom
+ .long sys_shutdown
+ .long sys_setsockopt
+ .long sys_getsockopt
+ .long sys_sendmsg /* 235 */
+ .long sys_recvmsg
+ /* Broken-out IPC family (maintain backwards compatibility in syscall
+ numbering with 2.4) */
+ .long sys_semop
+ .long sys_semget
+ .long sys_semctl
+ .long sys_msgsnd /* 240 */
+ .long sys_msgrcv
+ .long sys_msgget
+ .long sys_msgctl
+ .long sys_shmatcall
+ .long sys_shmdt /* 245 */
+ .long sys_shmget
+ .long sys_shmctl
+ /* Rest of syscalls listed in 2.4 i386 unistd.h */
+ .long sys_getdents64
+ .long sys_fcntl64
+ .long sys_ni_syscall /* 250 reserved for TUX */
+ .long sys_ni_syscall /* Reserved for Security */
+ .long sys_gettid
+ .long sys_readahead
+ .long sys_setxattr
+ .long sys_lsetxattr /* 255 */
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr
+ .long sys_fgetxattr
+ .long sys_listxattr /* 260 */
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr
+ .long sys_lremovexattr
+ .long sys_fremovexattr /* 265 */
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity /* 270 */
+ .long sys_ni_syscall
+ .long sys_ni_syscall
+ .long sys_io_setup
+ .long sys_io_destroy
+ .long sys_io_getevents /* 275 */
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64
+ .long sys_ni_syscall
+ .long sys_exit_group /* 280 */
+ /* Rest of new 2.6 syscalls */
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl
+ .long sys_epoll_wait
+ .long sys_remap_file_pages /* 285 */
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun /* 290 */
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime
+ .long sys_clock_getres
+ .long sys_clock_nanosleep /* 295 */
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill
+ .long sys_utimes
+ .long sys_fadvise64_64 /* 300 */
+ .long sys_ni_syscall /* Reserved for vserver */
+ .long sys_ni_syscall /* Reserved for mbind */
+ .long sys_ni_syscall /* get_mempolicy */
+ .long sys_ni_syscall /* set_mempolicy */
+ .long sys_mq_open /* 305 */
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive
+ .long sys_mq_notify
+ .long sys_mq_getsetattr /* 310 */
+ .long sys_ni_syscall /* Reserved for kexec */
+ .long sys_waitid
+ .long sys_add_key
+ .long sys_request_key
+ .long sys_keyctl /* 315 */
+
diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
new file mode 100644
index 000000000000..6c84da3efc73
--- /dev/null
+++ b/arch/sh64/kernel/time.c
@@ -0,0 +1,610 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/time.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2003 Richard Curnow
+ *
+ * Original TMU/RTC code taken from sh version.
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Some code taken from i386 version.
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/smp.h>
+
+#include <asm/registers.h> /* required by inline __asm__ stmt. */
+
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+
+#include <linux/timex.h>
+#include <linux/irq.h>
+#include <asm/hardware.h>
+
+#define TMU_TOCR_INIT 0x00
+#define TMU0_TCR_INIT 0x0020
+#define TMU_TSTR_INIT 1
+#define TMU_TSTR_OFF 0
+
+/* RCR1 Bits */
+#define RCR1_CF 0x80 /* Carry Flag */
+#define RCR1_CIE 0x10 /* Carry Interrupt Enable */
+#define RCR1_AIE 0x08 /* Alarm Interrupt Enable */
+#define RCR1_AF 0x01 /* Alarm Flag */
+
+/* RCR2 Bits */
+#define RCR2_PEF 0x80 /* PEriodic interrupt Flag */
+#define RCR2_PESMASK 0x70 /* Periodic interrupt Set */
+#define RCR2_RTCEN 0x08 /* ENable RTC */
+#define RCR2_ADJ 0x04 /* ADJustment (30-second) */
+#define RCR2_RESET 0x02 /* Reset bit */
+#define RCR2_START 0x01 /* Start bit */
+
+/* Clock, Power and Reset Controller */
+#define CPRC_BLOCK_OFF 0x01010000
+#define CPRC_BASE PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF
+
+#define FRQCR (cprc_base+0x0)
+#define WTCSR (cprc_base+0x0018)
+#define STBCR (cprc_base+0x0030)
+
+/* Time Management Unit */
+#define TMU_BLOCK_OFF 0x01020000
+#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
+#define TMU0_BASE tmu_base + 0x8 + (0xc * 0x0)
+#define TMU1_BASE tmu_base + 0x8 + (0xc * 0x1)
+#define TMU2_BASE tmu_base + 0x8 + (0xc * 0x2)
+
+#define TMU_TOCR tmu_base+0x0 /* Byte access */
+#define TMU_TSTR tmu_base+0x4 /* Byte access */
+
+#define TMU0_TCOR TMU0_BASE+0x0 /* Long access */
+#define TMU0_TCNT TMU0_BASE+0x4 /* Long access */
+#define TMU0_TCR TMU0_BASE+0x8 /* Word access */
+
+/* Real Time Clock */
+#define RTC_BLOCK_OFF 0x01040000
+#define RTC_BASE PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
+
+#define R64CNT rtc_base+0x00
+#define RSECCNT rtc_base+0x04
+#define RMINCNT rtc_base+0x08
+#define RHRCNT rtc_base+0x0c
+#define RWKCNT rtc_base+0x10
+#define RDAYCNT rtc_base+0x14
+#define RMONCNT rtc_base+0x18
+#define RYRCNT rtc_base+0x1c /* 16bit */
+#define RSECAR rtc_base+0x20
+#define RMINAR rtc_base+0x24
+#define RHRAR rtc_base+0x28
+#define RWKAR rtc_base+0x2c
+#define RDAYAR rtc_base+0x30
+#define RMONAR rtc_base+0x34
+#define RCR1 rtc_base+0x38
+#define RCR2 rtc_base+0x3c
+
+#ifndef BCD_TO_BIN
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+#endif
+
+#ifndef BIN_TO_BCD
+#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
+#endif
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+extern unsigned long wall_jiffies;
+
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+static unsigned long tmu_base, rtc_base;
+unsigned long cprc_base;
+
+/* Variables to allow interpolation of time of day to resolution better than a
+ * jiffy. */
+
+/* This is effectively protected by xtime_lock */
+static unsigned long ctc_last_interrupt;
+static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
+
+#define CTC_JIFFY_SCALE_SHIFT 40
+
+/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
+static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
+
+/* Estimate number of microseconds that have elapsed since the last timer tick,
+ by scaling the delta that has occured in the CTC register.
+
+ WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
+ the CPU clock rate. If the CPU sleeps, the CTC stops counting. Bear this
+ in mind if enabling SLEEP_WORKS in process.c. In that case, this algorithm
+ probably needs to use TMU.TCNT0 instead. This will work even if the CPU is
+ sleeping, though will be coarser.
+
+ FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
+ is running or if the freq or tick arguments of adjtimex are modified after
+ we have calibrated the scaling factor? This will result in either a jump at
+ the end of a tick period, or a wrap backwards at the start of the next one,
+ if the application is reading the time of day often enough. I think we
+ ought to do better than this. For this reason, usecs_per_jiffy is left
+ separated out in the calculation below. This allows some future hook into
+ the adjtime-related stuff in kernel/timer.c to remove this hazard.
+
+*/
+
+static unsigned long usecs_since_tick(void)
+{
+ unsigned long long current_ctc;
+ long ctc_ticks_since_interrupt;
+ unsigned long long ull_ctc_ticks_since_interrupt;
+ unsigned long result;
+
+ unsigned long long mul1_out;
+ unsigned long long mul1_out_high;
+ unsigned long long mul2_out_low, mul2_out_high;
+
+ /* Read CTC register */
+ asm ("getcon cr62, %0" : "=r" (current_ctc));
+ /* Note, the CTC counts down on each CPU clock, not up.
+ Note(2), use long type to get correct wraparound arithmetic when
+ the counter crosses zero. */
+ ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
+ ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
+
+ /* Inline assembly to do 32x32x32->64 multiplier */
+ asm volatile ("mulu.l %1, %2, %0" :
+ "=r" (mul1_out) :
+ "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
+
+ mul1_out_high = mul1_out >> 32;
+
+ asm volatile ("mulu.l %1, %2, %0" :
+ "=r" (mul2_out_low) :
+ "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
+
+#if 1
+ asm volatile ("mulu.l %1, %2, %0" :
+ "=r" (mul2_out_high) :
+ "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
+#endif
+
+ result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
+
+ return result;
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long flags;
+ unsigned long seq;
+ unsigned long usec, sec;
+
+ do {
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ usec = usecs_since_tick();
+ {
+ unsigned long lost = jiffies - wall_jiffies;
+
+ if (lost)
+ usec += lost * (1000000 / HZ);
+ }
+
+ sec = xtime.tv_sec;
+ usec += xtime.tv_nsec / 1000;
+ } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+
+ while (usec >= 1000000) {
+ usec -= 1000000;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ /*
+ * This is revolting. We need to set "xtime" correctly. However, the
+ * value in this location is the value at the most recent update of
+ * wall time. Discover what correction gettimeofday() would have
+ * made, and then undo it!
+ */
+ nsec -= 1000 * (usecs_since_tick() +
+ (jiffies - wall_jiffies) * (1000000 / HZ));
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ time_adjust = 0; /* stop active adjtime() */
+ time_status |= STA_UNSYNC;
+ time_maxerror = NTP_PHASE_LIMIT;
+ time_esterror = NTP_PHASE_LIMIT;
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+
+ return 0;
+}
+
+static int set_rtc_time(unsigned long nowtime)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+
+ ctrl_outb(RCR2_RESET, RCR2); /* Reset pre-scaler & stop RTC */
+
+ cmos_minutes = ctrl_inb(RMINCNT);
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ ctrl_outb(real_seconds, RSECCNT);
+ ctrl_outb(real_minutes, RMINCNT);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_time: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start RTC */
+
+ return retval;
+}
+
+/* last time the RTC clock got updated */
+static long last_rtc_update = 0;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long long current_ctc;
+ asm ("getcon cr62, %0" : "=r" (current_ctc));
+ ctc_last_interrupt = (unsigned long) current_ctc;
+
+ do_timer(regs);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+ profile_tick(CPU_PROFILING, regs);
+
+#ifdef CONFIG_HEARTBEAT
+ {
+ extern void heartbeat(void);
+
+ heartbeat();
+ }
+#endif
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+ if ((time_status & STA_UNSYNC) == 0 &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+ (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
+ if (set_rtc_time(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+ }
+}
+
+/*
+ * This is the same as the above, except we _also_ save the current
+ * Time Stamp Counter value at the time of the timer interrupt, so that
+ * we later on can estimate the time of day more exactly.
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long timer_status;
+
+ /* Clear UNF bit */
+ timer_status = ctrl_inw(TMU0_TCR);
+ timer_status &= ~0x100;
+ ctrl_outw(timer_status, TMU0_TCR);
+
+ /*
+ * Here we are in the timer irq handler. We just have irqs locally
+ * disabled but we don't know if the timer_bh is running on the other
+ * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+ * the irq version of write_lock because as just said we have irq
+ * locally disabled. -arca
+ */
+ write_lock(&xtime_lock);
+ do_timer_interrupt(irq, NULL, regs);
+ write_unlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned long get_rtc_time(void)
+{
+ unsigned int sec, min, hr, wk, day, mon, yr, yr100;
+
+ again:
+ do {
+ ctrl_outb(0, RCR1); /* Clear CF-bit */
+ sec = ctrl_inb(RSECCNT);
+ min = ctrl_inb(RMINCNT);
+ hr = ctrl_inb(RHRCNT);
+ wk = ctrl_inb(RWKCNT);
+ day = ctrl_inb(RDAYCNT);
+ mon = ctrl_inb(RMONCNT);
+ yr = ctrl_inw(RYRCNT);
+ yr100 = (yr >> 8);
+ yr &= 0xff;
+ } while ((ctrl_inb(RCR1) & RCR1_CF) != 0);
+
+ BCD_TO_BIN(yr100);
+ BCD_TO_BIN(yr);
+ BCD_TO_BIN(mon);
+ BCD_TO_BIN(day);
+ BCD_TO_BIN(hr);
+ BCD_TO_BIN(min);
+ BCD_TO_BIN(sec);
+
+ if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
+ hr > 23 || min > 59 || sec > 59) {
+ printk(KERN_ERR
+ "SH RTC: invalid value, resetting to 1 Jan 2000\n");
+ ctrl_outb(RCR2_RESET, RCR2); /* Reset & Stop */
+ ctrl_outb(0, RSECCNT);
+ ctrl_outb(0, RMINCNT);
+ ctrl_outb(0, RHRCNT);
+ ctrl_outb(6, RWKCNT);
+ ctrl_outb(1, RDAYCNT);
+ ctrl_outb(1, RMONCNT);
+ ctrl_outw(0x2000, RYRCNT);
+ ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start */
+ goto again;
+ }
+
+ return mktime(yr100 * 100 + yr, mon, day, hr, min, sec);
+}
+
+static __init unsigned int get_cpu_hz(void)
+{
+ unsigned int count;
+ unsigned long __dummy;
+ unsigned long ctc_val_init, ctc_val;
+
+ /*
+ ** Regardless the toolchain, force the compiler to use the
+ ** arbitrary register r3 as a clock tick counter.
+ ** NOTE: r3 must be in accordance with rtc_interrupt()
+ */
+ register unsigned long long __rtc_irq_flag __asm__ ("r3");
+
+ local_irq_enable();
+ do {} while (ctrl_inb(R64CNT) != 0);
+ ctrl_outb(RCR1_CIE, RCR1); /* Enable carry interrupt */
+
+ /*
+ * r3 is arbitrary. CDC does not support "=z".
+ */
+ ctc_val_init = 0xffffffff;
+ ctc_val = ctc_val_init;
+
+ asm volatile("gettr tr0, %1\n\t"
+ "putcon %0, " __CTC "\n\t"
+ "and %2, r63, %2\n\t"
+ "pta $+4, tr0\n\t"
+ "beq/l %2, r63, tr0\n\t"
+ "ptabs %1, tr0\n\t"
+ "getcon " __CTC ", %0\n\t"
+ : "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag)
+ : "0" (0));
+ local_irq_disable();
+ /*
+ * SH-3:
+ * CPU clock = 4 stages * loop
+ * tst rm,rm if id ex
+ * bt/s 1b if id ex
+ * add #1,rd if id ex
+ * (if) pipe line stole
+ * tst rm,rm if id ex
+ * ....
+ *
+ *
+ * SH-4:
+ * CPU clock = 6 stages * loop
+ * I don't know why.
+ * ....
+ *
+ * SH-5:
+ * Use CTC register to count. This approach returns the right value
+ * even if the I-cache is disabled (e.g. whilst debugging.)
+ *
+ */
+
+ count = ctc_val_init - ctc_val; /* CTC counts down */
+
+#if defined (CONFIG_SH_SIMULATOR)
+ /*
+ * Let's pretend we are a 5MHz SH-5 to avoid a too
+ * little timer interval. Also to keep delay
+ * calibration within a reasonable time.
+ */
+ return 5000000;
+#else
+ /*
+ * This really is count by the number of clock cycles
+ * by the ratio between a complete R64CNT
+ * wrap-around (128) and CUI interrupt being raised (64).
+ */
+ return count*2;
+#endif
+}
+
+static irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ ctrl_outb(0, RCR1); /* Disable Carry Interrupts */
+ regs->regs[3] = 1; /* Using r3 */
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
+static struct irqaction irq1 = { rtc_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "rtc", NULL, NULL};
+
+void __init time_init(void)
+{
+ unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+ unsigned long interval;
+ unsigned long frqcr, ifc, pfc;
+ static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
+#define bfc_table ifc_table /* Same */
+#define pfc_table ifc_table /* Same */
+
+ tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
+ if (!tmu_base) {
+ panic("Unable to remap TMU\n");
+ }
+
+ rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
+ if (!rtc_base) {
+ panic("Unable to remap RTC\n");
+ }
+
+ cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
+ if (!cprc_base) {
+ panic("Unable to remap CPRC\n");
+ }
+
+ xtime.tv_sec = get_rtc_time();
+ xtime.tv_nsec = 0;
+
+ setup_irq(TIMER_IRQ, &irq0);
+ setup_irq(RTC_IRQ, &irq1);
+
+ /* Check how fast it is.. */
+ cpu_clock = get_cpu_hz();
+
+ /* Note careful order of operations to maintain reasonable precision and avoid overflow. */
+ scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ));
+
+ disable_irq(RTC_IRQ);
+
+ printk("CPU clock: %d.%02dMHz\n",
+ (cpu_clock / 1000000), (cpu_clock % 1000000)/10000);
+ {
+ unsigned short bfc;
+ frqcr = ctrl_inl(FRQCR);
+ ifc = ifc_table[(frqcr>> 6) & 0x0007];
+ bfc = bfc_table[(frqcr>> 3) & 0x0007];
+ pfc = pfc_table[(frqcr>> 12) & 0x0007];
+ master_clock = cpu_clock * ifc;
+ bus_clock = master_clock/bfc;
+ }
+
+ printk("Bus clock: %d.%02dMHz\n",
+ (bus_clock/1000000), (bus_clock % 1000000)/10000);
+ module_clock = master_clock/pfc;
+ printk("Module clock: %d.%02dMHz\n",
+ (module_clock/1000000), (module_clock % 1000000)/10000);
+ interval = (module_clock/(HZ*4));
+
+ printk("Interval = %ld\n", interval);
+
+ current_cpu_data.cpu_clock = cpu_clock;
+ current_cpu_data.master_clock = master_clock;
+ current_cpu_data.bus_clock = bus_clock;
+ current_cpu_data.module_clock = module_clock;
+
+ /* Start TMU0 */
+ ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
+ ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
+ ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
+ ctrl_outl(interval, TMU0_TCOR);
+ ctrl_outl(interval, TMU0_TCNT);
+ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+}
+
+void enter_deep_standby(void)
+{
+ /* Disable watchdog timer */
+ ctrl_outl(0xa5000000, WTCSR);
+ /* Configure deep standby on sleep */
+ ctrl_outl(0x03, STBCR);
+
+#ifdef CONFIG_SH_ALPHANUMERIC
+ {
+ extern void mach_alphanum(int position, unsigned char value);
+ extern void mach_alphanum_brightness(int setting);
+ char halted[] = "Halted. ";
+ int i;
+ mach_alphanum_brightness(6); /* dimmest setting above off */
+ for (i=0; i<8; i++) {
+ mach_alphanum(i, halted[i]);
+ }
+ asm __volatile__ ("synco");
+ }
+#endif
+
+ asm __volatile__ ("sleep");
+ asm __volatile__ ("synci");
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ panic("Unexpected wakeup!\n");
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ return (unsigned long long)jiffies * (1000000000 / HZ);
+}
+
diff --git a/arch/sh64/kernel/traps.c b/arch/sh64/kernel/traps.c
new file mode 100644
index 000000000000..224b7f5b9224
--- /dev/null
+++ b/arch/sh64/kernel/traps.c
@@ -0,0 +1,961 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/traps.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2003, 2004 Richard Curnow
+ *
+ */
+
+/*
+ * 'Traps.c' handles hardware traps and faults after we have saved some
+ * state in 'entry.S'.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/kallsyms.h>
+#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+
+#undef DEBUG_EXCEPTION
+#ifdef DEBUG_EXCEPTION
+/* implemented in ../lib/dbg.c */
+extern void show_excp_regs(char *fname, int trapnr, int signr,
+ struct pt_regs *regs);
+#else
+#define show_excp_regs(a, b, c, d)
+#endif
+
+static void do_unhandled_exception(int trapnr, int signr, char *str, char *fn_name,
+ unsigned long error_code, struct pt_regs *regs, struct task_struct *tsk);
+
+#define DO_ERROR(trapnr, signr, str, name, tsk) \
+asmlinkage void do_##name(unsigned long error_code, struct pt_regs *regs) \
+{ \
+ do_unhandled_exception(trapnr, signr, str, __stringify(name), error_code, regs, current); \
+}
+
+spinlock_t die_lock;
+
+void die(const char * str, struct pt_regs * regs, long err)
+{
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ printk("%s: %lx\n", str, (err & 0xffffff));
+ show_regs(regs);
+ spin_unlock_irq(&die_lock);
+ do_exit(SIGSEGV);
+}
+
+static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err)
+{
+ if (!user_mode(regs))
+ die(str, regs, err);
+}
+
+static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
+{
+ if (!user_mode(regs)) {
+ const struct exception_table_entry *fixup;
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
+ die(str, regs, err);
+ }
+}
+
+DO_ERROR(13, SIGILL, "illegal slot instruction", illegal_slot_inst, current)
+DO_ERROR(87, SIGSEGV, "address error (exec)", address_error_exec, current)
+
+
+/* Implement misaligned load/store handling for kernel (and optionally for user
+ mode too). Limitation : only SHmedia mode code is handled - there is no
+ handling at all for misaligned accesses occurring in SHcompact code yet. */
+
+static int misaligned_fixup(struct pt_regs *regs);
+
+asmlinkage void do_address_error_load(unsigned long error_code, struct pt_regs *regs)
+{
+ if (misaligned_fixup(regs) < 0) {
+ do_unhandled_exception(7, SIGSEGV, "address error(load)",
+ "do_address_error_load",
+ error_code, regs, current);
+ }
+ return;
+}
+
+asmlinkage void do_address_error_store(unsigned long error_code, struct pt_regs *regs)
+{
+ if (misaligned_fixup(regs) < 0) {
+ do_unhandled_exception(8, SIGSEGV, "address error(store)",
+ "do_address_error_store",
+ error_code, regs, current);
+ }
+ return;
+}
+
+#if defined(CONFIG_SH64_ID2815_WORKAROUND)
+
+#define OPCODE_INVALID 0
+#define OPCODE_USER_VALID 1
+#define OPCODE_PRIV_VALID 2
+
+/* getcon/putcon - requires checking which control register is referenced. */
+#define OPCODE_CTRL_REG 3
+
+/* Table of valid opcodes for SHmedia mode.
+ Form a 10-bit value by concatenating the major/minor opcodes i.e.
+ opcode[31:26,20:16]. The 6 MSBs of this value index into the following
+ array. The 4 LSBs select the bit-pair in the entry (bits 1:0 correspond to
+ LSBs==4'b0000 etc). */
+static unsigned long shmedia_opcode_table[64] = {
+ 0x55554044,0x54445055,0x15141514,0x14541414,0x00000000,0x10001000,0x01110055,0x04050015,
+ 0x00000444,0xc0000000,0x44545515,0x40405555,0x55550015,0x10005555,0x55555505,0x04050000,
+ 0x00000555,0x00000404,0x00040445,0x15151414,0x00000000,0x00000000,0x00000000,0x00000000,
+ 0x00000055,0x40404444,0x00000404,0xc0009495,0x00000000,0x00000000,0x00000000,0x00000000,
+ 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
+ 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
+ 0x80005050,0x04005055,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
+ 0x81055554,0x00000404,0x55555555,0x55555555,0x00000000,0x00000000,0x00000000,0x00000000
+};
+
+void do_reserved_inst(unsigned long error_code, struct pt_regs *regs)
+{
+ /* Workaround SH5-101 cut2 silicon defect #2815 :
+ in some situations, inter-mode branches from SHcompact -> SHmedia
+ which should take ITLBMISS or EXECPROT exceptions at the target
+ falsely take RESINST at the target instead. */
+
+ unsigned long opcode = 0x6ff4fff0; /* guaranteed reserved opcode */
+ unsigned long pc, aligned_pc;
+ int get_user_error;
+ int trapnr = 12;
+ int signr = SIGILL;
+ char *exception_name = "reserved_instruction";
+
+ pc = regs->pc;
+ if ((pc & 3) == 1) {
+ /* SHmedia : check for defect. This requires executable vmas
+ to be readable too. */
+ aligned_pc = pc & ~3;
+ if (!access_ok(VERIFY_READ, aligned_pc, sizeof(unsigned long))) {
+ get_user_error = -EFAULT;
+ } else {
+ get_user_error = __get_user(opcode, (unsigned long *)aligned_pc);
+ }
+ if (get_user_error >= 0) {
+ unsigned long index, shift;
+ unsigned long major, minor, combined;
+ unsigned long reserved_field;
+ reserved_field = opcode & 0xf; /* These bits are currently reserved as zero in all valid opcodes */
+ major = (opcode >> 26) & 0x3f;
+ minor = (opcode >> 16) & 0xf;
+ combined = (major << 4) | minor;
+ index = major;
+ shift = minor << 1;
+ if (reserved_field == 0) {
+ int opcode_state = (shmedia_opcode_table[index] >> shift) & 0x3;
+ switch (opcode_state) {
+ case OPCODE_INVALID:
+ /* Trap. */
+ break;
+ case OPCODE_USER_VALID:
+ /* Restart the instruction : the branch to the instruction will now be from an RTE
+ not from SHcompact so the silicon defect won't be triggered. */
+ return;
+ case OPCODE_PRIV_VALID:
+ if (!user_mode(regs)) {
+ /* Should only ever get here if a module has
+ SHcompact code inside it. If so, the same fix up is needed. */
+ return; /* same reason */
+ }
+ /* Otherwise, user mode trying to execute a privileged instruction -
+ fall through to trap. */
+ break;
+ case OPCODE_CTRL_REG:
+ /* If in privileged mode, return as above. */
+ if (!user_mode(regs)) return;
+ /* In user mode ... */
+ if (combined == 0x9f) { /* GETCON */
+ unsigned long regno = (opcode >> 20) & 0x3f;
+ if (regno >= 62) {
+ return;
+ }
+ /* Otherwise, reserved or privileged control register, => trap */
+ } else if (combined == 0x1bf) { /* PUTCON */
+ unsigned long regno = (opcode >> 4) & 0x3f;
+ if (regno >= 62) {
+ return;
+ }
+ /* Otherwise, reserved or privileged control register, => trap */
+ } else {
+ /* Trap */
+ }
+ break;
+ default:
+ /* Fall through to trap. */
+ break;
+ }
+ }
+ /* fall through to normal resinst processing */
+ } else {
+ /* Error trying to read opcode. This typically means a
+ real fault, not a RESINST any more. So change the
+ codes. */
+ trapnr = 87;
+ exception_name = "address error (exec)";
+ signr = SIGSEGV;
+ }
+ }
+
+ do_unhandled_exception(trapnr, signr, exception_name, "do_reserved_inst", error_code, regs, current);
+}
+
+#else /* CONFIG_SH64_ID2815_WORKAROUND */
+
+/* If the workaround isn't needed, this is just a straightforward reserved
+ instruction */
+DO_ERROR(12, SIGILL, "reserved instruction", reserved_inst, current)
+
+#endif /* CONFIG_SH64_ID2815_WORKAROUND */
+
+
+#include <asm/system.h>
+
+/* Called with interrupts disabled */
+asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
+{
+ PLS();
+ show_excp_regs(__FUNCTION__, -1, -1, regs);
+ die_if_kernel("exception", regs, ex);
+}
+
+int do_unknown_trapa(unsigned long scId, struct pt_regs *regs)
+{
+ /* Syscall debug */
+ printk("System call ID error: [0x1#args:8 #syscall:16 0x%lx]\n", scId);
+
+ die_if_kernel("unknown trapa", regs, scId);
+
+ return -ENOSYS;
+}
+
+void show_stack(struct task_struct *tsk, unsigned long *sp)
+{
+#ifdef CONFIG_KALLSYMS
+ extern void sh64_unwind(struct pt_regs *regs);
+ struct pt_regs *regs;
+
+ regs = tsk ? tsk->thread.kregs : NULL;
+
+ sh64_unwind(regs);
+#else
+ printk(KERN_ERR "Can't backtrace on sh64 without CONFIG_KALLSYMS\n");
+#endif
+}
+
+void show_task(unsigned long *sp)
+{
+ show_stack(NULL, sp);
+}
+
+void dump_stack(void)
+{
+ show_task(NULL);
+}
+/* Needed by any user of WARN_ON in view of the defn in include/asm-sh/bug.h */
+EXPORT_SYMBOL(dump_stack);
+
+static void do_unhandled_exception(int trapnr, int signr, char *str, char *fn_name,
+ unsigned long error_code, struct pt_regs *regs, struct task_struct *tsk)
+{
+ show_excp_regs(fn_name, trapnr, signr, regs);
+ tsk->thread.error_code = error_code;
+ tsk->thread.trap_no = trapnr;
+
+ if (user_mode(regs))
+ force_sig(signr, tsk);
+
+ die_if_no_fixup(str, regs, error_code);
+}
+
+static int read_opcode(unsigned long long pc, unsigned long *result_opcode, int from_user_mode)
+{
+ int get_user_error;
+ unsigned long aligned_pc;
+ unsigned long opcode;
+
+ if ((pc & 3) == 1) {
+ /* SHmedia */
+ aligned_pc = pc & ~3;
+ if (from_user_mode) {
+ if (!access_ok(VERIFY_READ, aligned_pc, sizeof(unsigned long))) {
+ get_user_error = -EFAULT;
+ } else {
+ get_user_error = __get_user(opcode, (unsigned long *)aligned_pc);
+ *result_opcode = opcode;
+ }
+ return get_user_error;
+ } else {
+ /* If the fault was in the kernel, we can either read
+ * this directly, or if not, we fault.
+ */
+ *result_opcode = *(unsigned long *) aligned_pc;
+ return 0;
+ }
+ } else if ((pc & 1) == 0) {
+ /* SHcompact */
+ /* TODO : provide handling for this. We don't really support
+ user-mode SHcompact yet, and for a kernel fault, this would
+ have to come from a module built for SHcompact. */
+ return -EFAULT;
+ } else {
+ /* misaligned */
+ return -EFAULT;
+ }
+}
+
+static int address_is_sign_extended(__u64 a)
+{
+ __u64 b;
+#if (NEFF == 32)
+ b = (__u64)(__s64)(__s32)(a & 0xffffffffUL);
+ return (b == a) ? 1 : 0;
+#else
+#error "Sign extend check only works for NEFF==32"
+#endif
+}
+
+static int generate_and_check_address(struct pt_regs *regs,
+ __u32 opcode,
+ int displacement_not_indexed,
+ int width_shift,
+ __u64 *address)
+{
+ /* return -1 for fault, 0 for OK */
+
+ __u64 base_address, addr;
+ int basereg;
+
+ basereg = (opcode >> 20) & 0x3f;
+ base_address = regs->regs[basereg];
+ if (displacement_not_indexed) {
+ __s64 displacement;
+ displacement = (opcode >> 10) & 0x3ff;
+ displacement = ((displacement << 54) >> 54); /* sign extend */
+ addr = (__u64)((__s64)base_address + (displacement << width_shift));
+ } else {
+ __u64 offset;
+ int offsetreg;
+ offsetreg = (opcode >> 10) & 0x3f;
+ offset = regs->regs[offsetreg];
+ addr = base_address + offset;
+ }
+
+ /* Check sign extended */
+ if (!address_is_sign_extended(addr)) {
+ return -1;
+ }
+
+#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
+ /* Check accessible. For misaligned access in the kernel, assume the
+ address is always accessible (and if not, just fault when the
+ load/store gets done.) */
+ if (user_mode(regs)) {
+ if (addr >= TASK_SIZE) {
+ return -1;
+ }
+ /* Do access_ok check later - it depends on whether it's a load or a store. */
+ }
+#endif
+
+ *address = addr;
+ return 0;
+}
+
+/* Default value as for sh */
+#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
+static int user_mode_unaligned_fixup_count = 10;
+static int user_mode_unaligned_fixup_enable = 1;
+#endif
+
+static int kernel_mode_unaligned_fixup_count = 32;
+
+static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result)
+{
+ unsigned short x;
+ unsigned char *p, *q;
+ p = (unsigned char *) (int) address;
+ q = (unsigned char *) &x;
+ q[0] = p[0];
+ q[1] = p[1];
+
+ if (do_sign_extend) {
+ *result = (__u64)(__s64) *(short *) &x;
+ } else {
+ *result = (__u64) x;
+ }
+}
+
+static void misaligned_kernel_word_store(__u64 address, __u64 value)
+{
+ unsigned short x;
+ unsigned char *p, *q;
+ p = (unsigned char *) (int) address;
+ q = (unsigned char *) &x;
+
+ x = (__u16) value;
+ p[0] = q[0];
+ p[1] = q[1];
+}
+
+static int misaligned_load(struct pt_regs *regs,
+ __u32 opcode,
+ int displacement_not_indexed,
+ int width_shift,
+ int do_sign_extend)
+{
+ /* Return -1 for a fault, 0 for OK */
+ int error;
+ int destreg;
+ __u64 address;
+
+ error = generate_and_check_address(regs, opcode,
+ displacement_not_indexed, width_shift, &address);
+ if (error < 0) {
+ return error;
+ }
+
+ destreg = (opcode >> 4) & 0x3f;
+#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
+ if (user_mode(regs)) {
+ __u64 buffer;
+
+ if (!access_ok(VERIFY_READ, (unsigned long) address, 1UL<<width_shift)) {
+ return -1;
+ }
+
+ if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) {
+ return -1; /* fault */
+ }
+ switch (width_shift) {
+ case 1:
+ if (do_sign_extend) {
+ regs->regs[destreg] = (__u64)(__s64) *(__s16 *) &buffer;
+ } else {
+ regs->regs[destreg] = (__u64) *(__u16 *) &buffer;
+ }
+ break;
+ case 2:
+ regs->regs[destreg] = (__u64)(__s64) *(__s32 *) &buffer;
+ break;
+ case 3:
+ regs->regs[destreg] = buffer;
+ break;
+ default:
+ printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n",
+ width_shift, (unsigned long) regs->pc);
+ break;
+ }
+ } else
+#endif
+ {
+ /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
+ __u64 lo, hi;
+
+ switch (width_shift) {
+ case 1:
+ misaligned_kernel_word_load(address, do_sign_extend, &regs->regs[destreg]);
+ break;
+ case 2:
+ asm ("ldlo.l %1, 0, %0" : "=r" (lo) : "r" (address));
+ asm ("ldhi.l %1, 3, %0" : "=r" (hi) : "r" (address));
+ regs->regs[destreg] = lo | hi;
+ break;
+ case 3:
+ asm ("ldlo.q %1, 0, %0" : "=r" (lo) : "r" (address));
+ asm ("ldhi.q %1, 7, %0" : "=r" (hi) : "r" (address));
+ regs->regs[destreg] = lo | hi;
+ break;
+
+ default:
+ printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n",
+ width_shift, (unsigned long) regs->pc);
+ break;
+ }
+ }
+
+ return 0;
+
+}
+
+static int misaligned_store(struct pt_regs *regs,
+ __u32 opcode,
+ int displacement_not_indexed,
+ int width_shift)
+{
+ /* Return -1 for a fault, 0 for OK */
+ int error;
+ int srcreg;
+ __u64 address;
+
+ error = generate_and_check_address(regs, opcode,
+ displacement_not_indexed, width_shift, &address);
+ if (error < 0) {
+ return error;
+ }
+
+ srcreg = (opcode >> 4) & 0x3f;
+#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
+ if (user_mode(regs)) {
+ __u64 buffer;
+
+ if (!access_ok(VERIFY_WRITE, (unsigned long) address, 1UL<<width_shift)) {
+ return -1;
+ }
+
+ switch (width_shift) {
+ case 1:
+ *(__u16 *) &buffer = (__u16) regs->regs[srcreg];
+ break;
+ case 2:
+ *(__u32 *) &buffer = (__u32) regs->regs[srcreg];
+ break;
+ case 3:
+ buffer = regs->regs[srcreg];
+ break;
+ default:
+ printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n",
+ width_shift, (unsigned long) regs->pc);
+ break;
+ }
+
+ if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
+ return -1; /* fault */
+ }
+ } else
+#endif
+ {
+ /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
+ __u64 val = regs->regs[srcreg];
+
+ switch (width_shift) {
+ case 1:
+ misaligned_kernel_word_store(address, val);
+ break;
+ case 2:
+ asm ("stlo.l %1, 0, %0" : : "r" (val), "r" (address));
+ asm ("sthi.l %1, 3, %0" : : "r" (val), "r" (address));
+ break;
+ case 3:
+ asm ("stlo.q %1, 0, %0" : : "r" (val), "r" (address));
+ asm ("sthi.q %1, 7, %0" : : "r" (val), "r" (address));
+ break;
+
+ default:
+ printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n",
+ width_shift, (unsigned long) regs->pc);
+ break;
+ }
+ }
+
+ return 0;
+
+}
+
+#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
+/* Never need to fix up misaligned FPU accesses within the kernel since that's a real
+ error. */
+static int misaligned_fpu_load(struct pt_regs *regs,
+ __u32 opcode,
+ int displacement_not_indexed,
+ int width_shift,
+ int do_paired_load)
+{
+ /* Return -1 for a fault, 0 for OK */
+ int error;
+ int destreg;
+ __u64 address;
+
+ error = generate_and_check_address(regs, opcode,
+ displacement_not_indexed, width_shift, &address);
+ if (error < 0) {
+ return error;
+ }
+
+ destreg = (opcode >> 4) & 0x3f;
+ if (user_mode(regs)) {
+ __u64 buffer;
+ __u32 buflo, bufhi;
+
+ if (!access_ok(VERIFY_READ, (unsigned long) address, 1UL<<width_shift)) {
+ return -1;
+ }
+
+ if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) {
+ return -1; /* fault */
+ }
+ /* 'current' may be the current owner of the FPU state, so
+ context switch the registers into memory so they can be
+ indexed by register number. */
+ if (last_task_used_math == current) {
+ grab_fpu();
+ fpsave(&current->thread.fpu.hard);
+ release_fpu();
+ last_task_used_math = NULL;
+ regs->sr |= SR_FD;
+ }
+
+ buflo = *(__u32*) &buffer;
+ bufhi = *(1 + (__u32*) &buffer);
+
+ switch (width_shift) {
+ case 2:
+ current->thread.fpu.hard.fp_regs[destreg] = buflo;
+ break;
+ case 3:
+ if (do_paired_load) {
+ current->thread.fpu.hard.fp_regs[destreg] = buflo;
+ current->thread.fpu.hard.fp_regs[destreg+1] = bufhi;
+ } else {
+#if defined(CONFIG_LITTLE_ENDIAN)
+ current->thread.fpu.hard.fp_regs[destreg] = bufhi;
+ current->thread.fpu.hard.fp_regs[destreg+1] = buflo;
+#else
+ current->thread.fpu.hard.fp_regs[destreg] = buflo;
+ current->thread.fpu.hard.fp_regs[destreg+1] = bufhi;
+#endif
+ }
+ break;
+ default:
+ printk("Unexpected width_shift %d in misaligned_fpu_load, PC=%08lx\n",
+ width_shift, (unsigned long) regs->pc);
+ break;
+ }
+ return 0;
+ } else {
+ die ("Misaligned FPU load inside kernel", regs, 0);
+ return -1;
+ }
+
+
+}
+
+static int misaligned_fpu_store(struct pt_regs *regs,
+ __u32 opcode,
+ int displacement_not_indexed,
+ int width_shift,
+ int do_paired_load)
+{
+ /* Return -1 for a fault, 0 for OK */
+ int error;
+ int srcreg;
+ __u64 address;
+
+ error = generate_and_check_address(regs, opcode,
+ displacement_not_indexed, width_shift, &address);
+ if (error < 0) {
+ return error;
+ }
+
+ srcreg = (opcode >> 4) & 0x3f;
+ if (user_mode(regs)) {
+ __u64 buffer;
+ /* Initialise these to NaNs. */
+ __u32 buflo=0xffffffffUL, bufhi=0xffffffffUL;
+
+ if (!access_ok(VERIFY_WRITE, (unsigned long) address, 1UL<<width_shift)) {
+ return -1;
+ }
+
+ /* 'current' may be the current owner of the FPU state, so
+ context switch the registers into memory so they can be
+ indexed by register number. */
+ if (last_task_used_math == current) {
+ grab_fpu();
+ fpsave(&current->thread.fpu.hard);
+ release_fpu();
+ last_task_used_math = NULL;
+ regs->sr |= SR_FD;
+ }
+
+ switch (width_shift) {
+ case 2:
+ buflo = current->thread.fpu.hard.fp_regs[srcreg];
+ break;
+ case 3:
+ if (do_paired_load) {
+ buflo = current->thread.fpu.hard.fp_regs[srcreg];
+ bufhi = current->thread.fpu.hard.fp_regs[srcreg+1];
+ } else {
+#if defined(CONFIG_LITTLE_ENDIAN)
+ bufhi = current->thread.fpu.hard.fp_regs[srcreg];
+ buflo = current->thread.fpu.hard.fp_regs[srcreg+1];
+#else
+ buflo = current->thread.fpu.hard.fp_regs[srcreg];
+ bufhi = current->thread.fpu.hard.fp_regs[srcreg+1];
+#endif
+ }
+ break;
+ default:
+ printk("Unexpected width_shift %d in misaligned_fpu_store, PC=%08lx\n",
+ width_shift, (unsigned long) regs->pc);
+ break;
+ }
+
+ *(__u32*) &buffer = buflo;
+ *(1 + (__u32*) &buffer) = bufhi;
+ if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
+ return -1; /* fault */
+ }
+ return 0;
+ } else {
+ die ("Misaligned FPU load inside kernel", regs, 0);
+ return -1;
+ }
+}
+#endif
+
+static int misaligned_fixup(struct pt_regs *regs)
+{
+ unsigned long opcode;
+ int error;
+ int major, minor;
+
+#if !defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
+ /* Never fixup user mode misaligned accesses without this option enabled. */
+ return -1;
+#else
+ if (!user_mode_unaligned_fixup_enable) return -1;
+#endif
+
+ error = read_opcode(regs->pc, &opcode, user_mode(regs));
+ if (error < 0) {
+ return error;
+ }
+ major = (opcode >> 26) & 0x3f;
+ minor = (opcode >> 16) & 0xf;
+
+#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
+ if (user_mode(regs) && (user_mode_unaligned_fixup_count > 0)) {
+ --user_mode_unaligned_fixup_count;
+ /* Only do 'count' worth of these reports, to remove a potential DoS against syslog */
+ printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%08x ins=0x%08lx\n",
+ current->comm, current->pid, (__u32)regs->pc, opcode);
+ } else
+#endif
+ if (!user_mode(regs) && (kernel_mode_unaligned_fixup_count > 0)) {
+ --kernel_mode_unaligned_fixup_count;
+ if (in_interrupt()) {
+ printk("Fixing up unaligned kernelspace access in interrupt pc=0x%08x ins=0x%08lx\n",
+ (__u32)regs->pc, opcode);
+ } else {
+ printk("Fixing up unaligned kernelspace access in \"%s\" pid=%d pc=0x%08x ins=0x%08lx\n",
+ current->comm, current->pid, (__u32)regs->pc, opcode);
+ }
+ }
+
+
+ switch (major) {
+ case (0x84>>2): /* LD.W */
+ error = misaligned_load(regs, opcode, 1, 1, 1);
+ break;
+ case (0xb0>>2): /* LD.UW */
+ error = misaligned_load(regs, opcode, 1, 1, 0);
+ break;
+ case (0x88>>2): /* LD.L */
+ error = misaligned_load(regs, opcode, 1, 2, 1);
+ break;
+ case (0x8c>>2): /* LD.Q */
+ error = misaligned_load(regs, opcode, 1, 3, 0);
+ break;
+
+ case (0xa4>>2): /* ST.W */
+ error = misaligned_store(regs, opcode, 1, 1);
+ break;
+ case (0xa8>>2): /* ST.L */
+ error = misaligned_store(regs, opcode, 1, 2);
+ break;
+ case (0xac>>2): /* ST.Q */
+ error = misaligned_store(regs, opcode, 1, 3);
+ break;
+
+ case (0x40>>2): /* indexed loads */
+ switch (minor) {
+ case 0x1: /* LDX.W */
+ error = misaligned_load(regs, opcode, 0, 1, 1);
+ break;
+ case 0x5: /* LDX.UW */
+ error = misaligned_load(regs, opcode, 0, 1, 0);
+ break;
+ case 0x2: /* LDX.L */
+ error = misaligned_load(regs, opcode, 0, 2, 1);
+ break;
+ case 0x3: /* LDX.Q */
+ error = misaligned_load(regs, opcode, 0, 3, 0);
+ break;
+ default:
+ error = -1;
+ break;
+ }
+ break;
+
+ case (0x60>>2): /* indexed stores */
+ switch (minor) {
+ case 0x1: /* STX.W */
+ error = misaligned_store(regs, opcode, 0, 1);
+ break;
+ case 0x2: /* STX.L */
+ error = misaligned_store(regs, opcode, 0, 2);
+ break;
+ case 0x3: /* STX.Q */
+ error = misaligned_store(regs, opcode, 0, 3);
+ break;
+ default:
+ error = -1;
+ break;
+ }
+ break;
+
+#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
+ case (0x94>>2): /* FLD.S */
+ error = misaligned_fpu_load(regs, opcode, 1, 2, 0);
+ break;
+ case (0x98>>2): /* FLD.P */
+ error = misaligned_fpu_load(regs, opcode, 1, 3, 1);
+ break;
+ case (0x9c>>2): /* FLD.D */
+ error = misaligned_fpu_load(regs, opcode, 1, 3, 0);
+ break;
+ case (0x1c>>2): /* floating indexed loads */
+ switch (minor) {
+ case 0x8: /* FLDX.S */
+ error = misaligned_fpu_load(regs, opcode, 0, 2, 0);
+ break;
+ case 0xd: /* FLDX.P */
+ error = misaligned_fpu_load(regs, opcode, 0, 3, 1);
+ break;
+ case 0x9: /* FLDX.D */
+ error = misaligned_fpu_load(regs, opcode, 0, 3, 0);
+ break;
+ default:
+ error = -1;
+ break;
+ }
+ break;
+ case (0xb4>>2): /* FLD.S */
+ error = misaligned_fpu_store(regs, opcode, 1, 2, 0);
+ break;
+ case (0xb8>>2): /* FLD.P */
+ error = misaligned_fpu_store(regs, opcode, 1, 3, 1);
+ break;
+ case (0xbc>>2): /* FLD.D */
+ error = misaligned_fpu_store(regs, opcode, 1, 3, 0);
+ break;
+ case (0x3c>>2): /* floating indexed stores */
+ switch (minor) {
+ case 0x8: /* FSTX.S */
+ error = misaligned_fpu_store(regs, opcode, 0, 2, 0);
+ break;
+ case 0xd: /* FSTX.P */
+ error = misaligned_fpu_store(regs, opcode, 0, 3, 1);
+ break;
+ case 0x9: /* FSTX.D */
+ error = misaligned_fpu_store(regs, opcode, 0, 3, 0);
+ break;
+ default:
+ error = -1;
+ break;
+ }
+ break;
+#endif
+
+ default:
+ /* Fault */
+ error = -1;
+ break;
+ }
+
+ if (error < 0) {
+ return error;
+ } else {
+ regs->pc += 4; /* Skip the instruction that's just been emulated */
+ return 0;
+ }
+
+}
+
+static ctl_table unaligned_table[] = {
+ {1, "kernel_reports", &kernel_mode_unaligned_fixup_count,
+ sizeof(int), 0644, NULL, &proc_dointvec},
+#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
+ {2, "user_reports", &user_mode_unaligned_fixup_count,
+ sizeof(int), 0644, NULL, &proc_dointvec},
+ {3, "user_enable", &user_mode_unaligned_fixup_enable,
+ sizeof(int), 0644, NULL, &proc_dointvec},
+#endif
+ {0}
+};
+
+static ctl_table unaligned_root[] = {
+ {1, "unaligned_fixup", NULL, 0, 0555, unaligned_table},
+ {0}
+};
+
+static ctl_table sh64_root[] = {
+ {1, "sh64", NULL, 0, 0555, unaligned_root},
+ {0}
+};
+static struct ctl_table_header *sysctl_header;
+static int __init init_sysctl(void)
+{
+ sysctl_header = register_sysctl_table(sh64_root, 0);
+ return 0;
+}
+
+__initcall(init_sysctl);
+
+
+asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs)
+{
+ u64 peek_real_address_q(u64 addr);
+ u64 poke_real_address_q(u64 addr, u64 val);
+ unsigned long long DM_EXP_CAUSE_PHY = 0x0c100010;
+ unsigned long long exp_cause;
+ /* It's not worth ioremapping the debug module registers for the amount
+ of access we make to them - just go direct to their physical
+ addresses. */
+ exp_cause = peek_real_address_q(DM_EXP_CAUSE_PHY);
+ if (exp_cause & ~4) {
+ printk("DM.EXP_CAUSE had unexpected bits set (=%08lx)\n",
+ (unsigned long)(exp_cause & 0xffffffff));
+ }
+ show_state();
+ /* Clear all DEBUGINT causes */
+ poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0);
+}
+
diff --git a/arch/sh64/kernel/unwind.c b/arch/sh64/kernel/unwind.c
new file mode 100644
index 000000000000..f934f97f9f9c
--- /dev/null
+++ b/arch/sh64/kernel/unwind.c
@@ -0,0 +1,326 @@
+/*
+ * arch/sh64/kernel/unwind.c
+ *
+ * Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kallsyms.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+static u8 regcache[63];
+
+/*
+ * Finding the previous stack frame isn't horribly straightforward as it is
+ * on some other platforms. In the sh64 case, we don't have "linked" stack
+ * frames, so we need to do a bit of work to determine the previous frame,
+ * and in turn, the previous r14/r18 pair.
+ *
+ * There are generally a few cases which determine where we can find out
+ * the r14/r18 values. In the general case, this can be determined by poking
+ * around the prologue of the symbol PC is in (note that we absolutely must
+ * have frame pointer support as well as the kernel symbol table mapped,
+ * otherwise we can't even get this far).
+ *
+ * In other cases, such as the interrupt/exception path, we can poke around
+ * the sp/fp.
+ *
+ * Notably, this entire approach is somewhat error prone, and in the event
+ * that the previous frame cannot be determined, that's all we can do.
+ * Either way, this still leaves us with a more correct backtrace then what
+ * we would be able to come up with by walking the stack (which is garbage
+ * for anything beyond the first frame).
+ * -- PFM.
+ */
+static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
+ unsigned long *pprev_fp, unsigned long *pprev_pc,
+ struct pt_regs *regs)
+{
+ const char *sym;
+ char *modname, namebuf[128];
+ unsigned long offset, size;
+ unsigned long prologue = 0;
+ unsigned long fp_displacement = 0;
+ unsigned long fp_prev = 0;
+ unsigned long offset_r14 = 0, offset_r18 = 0;
+ int i, found_prologue_end = 0;
+
+ sym = kallsyms_lookup(pc, &size, &offset, &modname, namebuf);
+ if (!sym)
+ return -EINVAL;
+
+ prologue = pc - offset;
+ if (!prologue)
+ return -EINVAL;
+
+ /* Validate fp, to avoid risk of dereferencing a bad pointer later.
+ Assume 128Mb since that's the amount of RAM on a Cayman. Modify
+ when there is an SH-5 board with more. */
+ if ((fp < (unsigned long) phys_to_virt(__MEMORY_START)) ||
+ (fp >= (unsigned long)(phys_to_virt(__MEMORY_START)) + 128*1024*1024) ||
+ ((fp & 7) != 0)) {
+ return -EINVAL;
+ }
+
+ /*
+ * Depth to walk, depth is completely arbitrary.
+ */
+ for (i = 0; i < 100; i++, prologue += sizeof(unsigned long)) {
+ unsigned long op;
+ u8 major, minor;
+ u8 src, dest, disp;
+
+ op = *(unsigned long *)prologue;
+
+ major = (op >> 26) & 0x3f;
+ src = (op >> 20) & 0x3f;
+ minor = (op >> 16) & 0xf;
+ disp = (op >> 10) & 0x3f;
+ dest = (op >> 4) & 0x3f;
+
+ /*
+ * Stack frame creation happens in a number of ways.. in the
+ * general case when the stack frame is less than 511 bytes,
+ * it's generally created by an addi or addi.l:
+ *
+ * addi/addi.l r15, -FRAME_SIZE, r15
+ *
+ * in the event that the frame size is bigger than this, it's
+ * typically created using a movi/sub pair as follows:
+ *
+ * movi FRAME_SIZE, rX
+ * sub r15, rX, r15
+ */
+
+ switch (major) {
+ case (0x00 >> 2):
+ switch (minor) {
+ case 0x8: /* add.l */
+ case 0x9: /* add */
+ /* Look for r15, r63, r14 */
+ if (src == 15 && disp == 63 && dest == 14)
+ found_prologue_end = 1;
+
+ break;
+ case 0xa: /* sub.l */
+ case 0xb: /* sub */
+ if (src != 15 || dest != 15)
+ continue;
+
+ fp_displacement -= regcache[disp];
+ fp_prev = fp - fp_displacement;
+ break;
+ }
+ break;
+ case (0xa8 >> 2): /* st.l */
+ if (src != 15)
+ continue;
+
+ switch (dest) {
+ case 14:
+ if (offset_r14 || fp_displacement == 0)
+ continue;
+
+ offset_r14 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
+ offset_r14 *= sizeof(unsigned long);
+ offset_r14 += fp_displacement;
+ break;
+ case 18:
+ if (offset_r18 || fp_displacement == 0)
+ continue;
+
+ offset_r18 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
+ offset_r18 *= sizeof(unsigned long);
+ offset_r18 += fp_displacement;
+ break;
+ }
+
+ break;
+ case (0xcc >> 2): /* movi */
+ if (dest >= 63) {
+ printk(KERN_NOTICE "%s: Invalid dest reg %d "
+ "specified in movi handler. Failed "
+ "opcode was 0x%lx: ", __FUNCTION__,
+ dest, op);
+
+ continue;
+ }
+
+ /* Sign extend */
+ regcache[dest] =
+ ((((s64)(u64)op >> 10) & 0xffff) << 54) >> 54;
+ break;
+ case (0xd0 >> 2): /* addi */
+ case (0xd4 >> 2): /* addi.l */
+ /* Look for r15, -FRAME_SIZE, r15 */
+ if (src != 15 || dest != 15)
+ continue;
+
+ /* Sign extended frame size.. */
+ fp_displacement +=
+ (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
+ fp_prev = fp - fp_displacement;
+ break;
+ }
+
+ if (found_prologue_end && offset_r14 && (offset_r18 || *pprev_pc) && fp_prev)
+ break;
+ }
+
+ if (offset_r14 == 0 || fp_prev == 0) {
+ if (!offset_r14)
+ pr_debug("Unable to find r14 offset\n");
+ if (!fp_prev)
+ pr_debug("Unable to find previous fp\n");
+
+ return -EINVAL;
+ }
+
+ /* For innermost leaf function, there might not be a offset_r18 */
+ if (!*pprev_pc && (offset_r18 == 0))
+ return -EINVAL;
+
+ *pprev_fp = *(unsigned long *)(fp_prev + offset_r14);
+
+ if (offset_r18)
+ *pprev_pc = *(unsigned long *)(fp_prev + offset_r18);
+
+ *pprev_pc &= ~1;
+
+ return 0;
+}
+
+/* Don't put this on the stack since we'll want to call sh64_unwind
+ * when we're close to underflowing the stack anyway. */
+static struct pt_regs here_regs;
+
+extern const char syscall_ret;
+extern const char ret_from_syscall;
+extern const char ret_from_exception;
+extern const char ret_from_irq;
+
+static void sh64_unwind_inner(struct pt_regs *regs);
+
+static void unwind_nested (unsigned long pc, unsigned long fp)
+{
+ if ((fp >= __MEMORY_START) &&
+ ((fp & 7) == 0)) {
+ sh64_unwind_inner((struct pt_regs *) fp);
+ }
+}
+
+static void sh64_unwind_inner(struct pt_regs *regs)
+{
+ unsigned long pc, fp;
+ int ofs = 0;
+ int first_pass;
+
+ pc = regs->pc & ~1;
+ fp = regs->regs[14];
+
+ first_pass = 1;
+ for (;;) {
+ int cond;
+ unsigned long next_fp, next_pc;
+
+ if (pc == ((unsigned long) &syscall_ret & ~1)) {
+ printk("SYSCALL\n");
+ unwind_nested(pc,fp);
+ return;
+ }
+
+ if (pc == ((unsigned long) &ret_from_syscall & ~1)) {
+ printk("SYSCALL (PREEMPTED)\n");
+ unwind_nested(pc,fp);
+ return;
+ }
+
+ /* In this case, the PC is discovered by lookup_prev_stack_frame but
+ it has 4 taken off it to look like the 'caller' */
+ if (pc == ((unsigned long) &ret_from_exception & ~1)) {
+ printk("EXCEPTION\n");
+ unwind_nested(pc,fp);
+ return;
+ }
+
+ if (pc == ((unsigned long) &ret_from_irq & ~1)) {
+ printk("IRQ\n");
+ unwind_nested(pc,fp);
+ return;
+ }
+
+ cond = ((pc >= __MEMORY_START) && (fp >= __MEMORY_START) &&
+ ((pc & 3) == 0) && ((fp & 7) == 0));
+
+ pc -= ofs;
+
+ printk("[<%08lx>] ", pc);
+ print_symbol("%s\n", pc);
+
+ if (first_pass) {
+ /* If the innermost frame is a leaf function, it's
+ * possible that r18 is never saved out to the stack.
+ */
+ next_pc = regs->regs[18];
+ } else {
+ next_pc = 0;
+ }
+
+ if (lookup_prev_stack_frame(fp, pc, &next_fp, &next_pc, regs) == 0) {
+ ofs = sizeof(unsigned long);
+ pc = next_pc & ~1;
+ fp = next_fp;
+ } else {
+ printk("Unable to lookup previous stack frame\n");
+ break;
+ }
+ first_pass = 0;
+ }
+
+ printk("\n");
+
+}
+
+void sh64_unwind(struct pt_regs *regs)
+{
+ if (!regs) {
+ /*
+ * Fetch current regs if we have no other saved state to back
+ * trace from.
+ */
+ regs = &here_regs;
+
+ __asm__ __volatile__ ("ori r14, 0, %0" : "=r" (regs->regs[14]));
+ __asm__ __volatile__ ("ori r15, 0, %0" : "=r" (regs->regs[15]));
+ __asm__ __volatile__ ("ori r18, 0, %0" : "=r" (regs->regs[18]));
+
+ __asm__ __volatile__ ("gettr tr0, %0" : "=r" (regs->tregs[0]));
+ __asm__ __volatile__ ("gettr tr1, %0" : "=r" (regs->tregs[1]));
+ __asm__ __volatile__ ("gettr tr2, %0" : "=r" (regs->tregs[2]));
+ __asm__ __volatile__ ("gettr tr3, %0" : "=r" (regs->tregs[3]));
+ __asm__ __volatile__ ("gettr tr4, %0" : "=r" (regs->tregs[4]));
+ __asm__ __volatile__ ("gettr tr5, %0" : "=r" (regs->tregs[5]));
+ __asm__ __volatile__ ("gettr tr6, %0" : "=r" (regs->tregs[6]));
+ __asm__ __volatile__ ("gettr tr7, %0" : "=r" (regs->tregs[7]));
+
+ __asm__ __volatile__ (
+ "pta 0f, tr0\n\t"
+ "blink tr0, %0\n\t"
+ "0: nop"
+ : "=r" (regs->pc)
+ );
+ }
+
+ printk("\nCall Trace:\n");
+ sh64_unwind_inner(regs);
+}
+
diff --git a/arch/sh64/kernel/vmlinux.lds.S b/arch/sh64/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..7d9f7a6339a0
--- /dev/null
+++ b/arch/sh64/kernel/vmlinux.lds.S
@@ -0,0 +1,181 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh5/vmlinux.lds.S
+ *
+ * ld script to make ST50 Linux kernel
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ * benedict.gaster@superh.com: 2nd May 2002
+ * Add definition of empty_zero_page to be the first page of kernel image.
+ *
+ * benedict.gaster@superh.com: 3rd May 2002
+ * Added support for ramdisk, removing statically linked romfs at the same time.
+ *
+ * lethal@linux-sh.org: 9th May 2003
+ * Kill off GLOBAL_NAME() usage and other CDC-isms.
+ *
+ * lethal@linux-sh.org: 19th May 2003
+ * Remove support for ancient toolchains.
+ */
+
+#include <linux/config.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+
+#define LOAD_OFFSET CONFIG_CACHED_MEMORY_OFFSET
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef NOTDEF
+#ifdef CONFIG_LITTLE_ENDIAN
+OUTPUT_FORMAT("elf32-sh64l-linux", "elf32-sh64l-linux", "elf32-sh64l-linux")
+#else
+OUTPUT_FORMAT("elf32-sh64", "elf32-sh64", "elf32-sh64")
+#endif
+#endif
+
+OUTPUT_ARCH(sh:sh5)
+
+#define C_PHYS(x) AT (ADDR(x) - LOAD_OFFSET)
+
+ENTRY(__start)
+SECTIONS
+{
+ . = CONFIG_CACHED_MEMORY_OFFSET + CONFIG_MEMORY_START + PAGE_SIZE;
+ _text = .; /* Text and read-only data */
+ text = .; /* Text and read-only data */
+
+ .empty_zero_page : C_PHYS(.empty_zero_page) {
+ *(.empty_zero_page)
+ } = 0
+
+ .text : C_PHYS(.text) {
+ *(.text)
+ *(.text64)
+ *(.text..SHmedia32)
+ SCHED_TEXT
+ LOCK_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+#ifdef CONFIG_LITTLE_ENDIAN
+ } = 0x6ff0fff0
+#else
+ } = 0xf0fff06f
+#endif
+
+ /* We likely want __ex_table to be Cache Line aligned */
+ . = ALIGN(L1_CACHE_BYTES); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : C_PHYS(__ex_table) { *(__ex_table) }
+ __stop___ex_table = .;
+
+ RODATA
+
+ _etext = .; /* End of text section */
+
+ .data : C_PHYS(.data) { /* Data */
+ *(.data)
+ CONSTRUCTORS
+ }
+
+ . = ALIGN(PAGE_SIZE);
+ .data.page_aligned : C_PHYS(.data.page_aligned) { *(.data.page_aligned) }
+
+ . = ALIGN(L1_CACHE_BYTES);
+ __per_cpu_start = .;
+ .data.percpu : C_PHYS(.data.percpu) { *(.data.percpu) }
+ __per_cpu_end = . ;
+ .data.cacheline_aligned : C_PHYS(.data.cacheline_aligned) { *(.data.cacheline_aligned) }
+
+ _edata = .; /* End of data section */
+
+ . = ALIGN(THREAD_SIZE); /* init_task: structure size aligned */
+ .data.init_task : C_PHYS(.data.init_task) { *(.data.init_task) }
+
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
+ __init_begin = .;
+ _sinittext = .;
+ .init.text : C_PHYS(.init.text) { *(.init.text) }
+ _einittext = .;
+ .init.data : C_PHYS(.init.data) { *(.init.data) }
+ . = ALIGN(L1_CACHE_BYTES); /* Better if Cache Line aligned */
+ __setup_start = .;
+ .init.setup : C_PHYS(.init.setup) { *(.init.setup) }
+ __setup_end = .;
+ __initcall_start = .;
+ .initcall.init : C_PHYS(.initcall.init) {
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ }
+ __initcall_end = .;
+ __con_initcall_start = .;
+ .con_initcall.init : C_PHYS(.con_initcall.init) { *(.con_initcall.init) }
+ __con_initcall_end = .;
+ SECURITY_INIT
+ __initramfs_start = .;
+ .init.ramfs : C_PHYS(.init.ramfs) { *(.init.ramfs) }
+ __initramfs_end = .;
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+
+ /* Align to the biggest single data representation, head and tail */
+ . = ALIGN(8);
+ __bss_start = .; /* BSS */
+ .bss : C_PHYS(.bss) {
+ *(.bss)
+ }
+ . = ALIGN(8);
+ _end = . ;
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exit.text)
+ *(.exit.data)
+ *(.exitcall.exit)
+ }
+
+ /* Stabs debugging sections. */
+ .stab 0 : C_PHYS(.stab) { *(.stab) }
+ .stabstr 0 : C_PHYS(.stabstr) { *(.stabstr) }
+ .stab.excl 0 : C_PHYS(.stab.excl) { *(.stab.excl) }
+ .stab.exclstr 0 : C_PHYS(.stab.exclstr) { *(.stab.exclstr) }
+ .stab.index 0 : C_PHYS(.stab.index) { *(.stab.index) }
+ .stab.indexstr 0 : C_PHYS(.stab.indexstr) { *(.stab.indexstr) }
+ .comment 0 : C_PHYS(.comment) { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging section are relative to the beginning
+ of the section so we begin .debug at 0. */
+ /* DWARF 1 */
+ .debug 0 : C_PHYS(.debug) { *(.debug) }
+ .line 0 : C_PHYS(.line) { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : C_PHYS(.debug_srcinfo) { *(.debug_srcinfo) }
+ .debug_sfnames 0 : C_PHYS(.debug_sfnames) { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : C_PHYS(.debug_aranges) { *(.debug_aranges) }
+ .debug_pubnames 0 : C_PHYS(.debug_pubnames) { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : C_PHYS(.debug_info) { *(.debug_info) }
+ .debug_abbrev 0 : C_PHYS(.debug_abbrev) { *(.debug_abbrev) }
+ .debug_line 0 : C_PHYS(.debug_line) { *(.debug_line) }
+ .debug_frame 0 : C_PHYS(.debug_frame) { *(.debug_frame) }
+ .debug_str 0 : C_PHYS(.debug_str) { *(.debug_str) }
+ .debug_loc 0 : C_PHYS(.debug_loc) { *(.debug_loc) }
+ .debug_macinfo 0 : C_PHYS(.debug_macinfo) { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : C_PHYS(.debug_weaknames) { *(.debug_weaknames) }
+ .debug_funcnames 0 : C_PHYS(.debug_funcnames) { *(.debug_funcnames) }
+ .debug_typenames 0 : C_PHYS(.debug_typenames) { *(.debug_typenames) }
+ .debug_varnames 0 : C_PHYS(.debug_varnames) { *(.debug_varnames) }
+ /* These must appear regardless of . */
+}
diff --git a/arch/sh64/lib/Makefile b/arch/sh64/lib/Makefile
new file mode 100644
index 000000000000..6a4cc3f9c0b1
--- /dev/null
+++ b/arch/sh64/lib/Makefile
@@ -0,0 +1,19 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2000, 2001 Paolo Alberelli
+# Coprygith (C) 2003 Paul Mundt
+#
+# Makefile for the SH-5 specific library files..
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+# Panic should really be compiled as PIC
+lib-y := udelay.o c-checksum.o dbg.o io.o panic.o memcpy.o copy_user_memcpy.o \
+ page_copy.o page_clear.o iomap.o
+
diff --git a/arch/sh64/lib/c-checksum.c b/arch/sh64/lib/c-checksum.c
new file mode 100644
index 000000000000..a82d8f1a7a64
--- /dev/null
+++ b/arch/sh64/lib/c-checksum.c
@@ -0,0 +1,231 @@
+/*
+ * arch/sh/lib/csum_parial.c
+ *
+ * This file contains network checksum routines that are better done
+ * in an architecture-specific manner due to speed..
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+static inline unsigned short from64to16(unsigned long long x)
+{
+ /* add up 32-bit words for 33 bits */
+ x = (x & 0xffffffff) + (x >> 32);
+ /* add up 16-bit and 17-bit words for 17+c bits */
+ x = (x & 0xffff) + (x >> 16);
+ /* add up 16-bit and 2-bit for 16+c bit */
+ x = (x & 0xffff) + (x >> 16);
+ /* add up carry.. */
+ x = (x & 0xffff) + (x >> 16);
+ return x;
+}
+
+static inline unsigned short foldto16(unsigned long x)
+{
+ /* add up 16-bit for 17 bits */
+ x = (x & 0xffff) + (x >> 16);
+ /* add up carry.. */
+ x = (x & 0xffff) + (x >> 16);
+ return x;
+}
+
+static inline unsigned short myfoldto16(unsigned long long x)
+{
+ /* Fold down to 32-bits so we don't loose in the typedef-less
+ network stack. */
+ /* 64 to 33 */
+ x = (x & 0xffffffff) + (x >> 32);
+ /* 33 to 32 */
+ x = (x & 0xffffffff) + (x >> 32);
+
+ /* add up 16-bit for 17 bits */
+ x = (x & 0xffff) + (x >> 16);
+ /* add up carry.. */
+ x = (x & 0xffff) + (x >> 16);
+ return x;
+}
+
+#define odd(x) ((x)&1)
+#define U16(x) ntohs(x)
+
+static unsigned long do_csum(const unsigned char *buff, int len)
+{
+ int odd, count;
+ unsigned long result = 0;
+
+ pr_debug("do_csum buff %p, len %d (0x%x)\n", buff, len, len);
+#ifdef DEBUG
+ for (i = 0; i < len; i++) {
+ if ((i % 26) == 0)
+ printk("\n");
+ printk("%02X ", buff[i]);
+ }
+#endif
+
+ if (len <= 0)
+ goto out;
+
+ odd = 1 & (unsigned long) buff;
+ if (odd) {
+ result = *buff << 8;
+ len--;
+ buff++;
+ }
+ count = len >> 1; /* nr of 16-bit words.. */
+ if (count) {
+ if (2 & (unsigned long) buff) {
+ result += *(unsigned short *) buff;
+ count--;
+ len -= 2;
+ buff += 2;
+ }
+ count >>= 1; /* nr of 32-bit words.. */
+ if (count) {
+ unsigned long carry = 0;
+ do {
+ unsigned long w = *(unsigned long *) buff;
+ buff += 4;
+ count--;
+ result += carry;
+ result += w;
+ carry = (w > result);
+ } while (count);
+ result += carry;
+ result = (result & 0xffff) + (result >> 16);
+ }
+ if (len & 2) {
+ result += *(unsigned short *) buff;
+ buff += 2;
+ }
+ }
+ if (len & 1)
+ result += *buff;
+ result = foldto16(result);
+ if (odd)
+ result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
+
+ pr_debug("\nCHECKSUM is 0x%x\n", result);
+
+ out:
+ return result;
+}
+
+/* computes the checksum of a memory block at buff, length len,
+ and adds in "sum" (32-bit) */
+unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
+{
+ unsigned long long result = do_csum(buff, len);
+
+ /* add in old sum, and carry.. */
+ result += sum;
+ /* 32+c bits -> 32 bits */
+ result = (result & 0xffffffff) + (result >> 32);
+
+ pr_debug("csum_partial, buff %p len %d sum 0x%x result=0x%016Lx\n",
+ buff, len, sum, result);
+
+ return result;
+}
+
+/* Copy while checksumming, otherwise like csum_partial. */
+unsigned int
+csum_partial_copy(const unsigned char *src, unsigned char *dst, int len, unsigned int sum)
+{
+ sum = csum_partial(src, len, sum);
+ memcpy(dst, src, len);
+
+ return sum;
+}
+
+/* Copy from userspace and compute checksum. If we catch an exception
+ then zero the rest of the buffer. */
+unsigned int
+csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, int len,
+ unsigned int sum, int *err_ptr)
+{
+ int missing;
+
+ pr_debug
+ ("csum_partial_copy_from_user src %p, dest %p, len %d, sum %08x, err_ptr %p\n",
+ src, dst, len, sum, err_ptr);
+ missing = copy_from_user(dst, src, len);
+ pr_debug(" access_ok %d\n", __access_ok((unsigned long) src, len));
+ pr_debug(" missing %d\n", missing);
+ if (missing) {
+ memset(dst + len - missing, 0, missing);
+ *err_ptr = -EFAULT;
+ }
+
+ return csum_partial(dst, len, sum);
+}
+
+/* Copy to userspace and compute checksum. */
+unsigned int
+csum_partial_copy_to_user(const unsigned char *src, unsigned char *dst, int len,
+ unsigned int sum, int *err_ptr)
+{
+ sum = csum_partial(src, len, sum);
+
+ if (copy_to_user(dst, src, len))
+ *err_ptr = -EFAULT;
+
+ return sum;
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
+{
+ pr_debug("ip_fast_csum %p,%d\n", iph, ihl);
+
+ return ~do_csum(iph, ihl * 4);
+}
+
+unsigned int csum_tcpudp_nofold(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto, unsigned int sum)
+{
+ unsigned long long result;
+
+ pr_debug("ntohs(0x%x)=0x%x\n", 0xdead, ntohs(0xdead));
+ pr_debug("htons(0x%x)=0x%x\n", 0xdead, htons(0xdead));
+
+ result = ((unsigned long long) saddr +
+ (unsigned long long) daddr +
+ (unsigned long long) sum +
+ ((unsigned long long) ntohs(len) << 16) +
+ ((unsigned long long) proto << 8));
+
+ /* Fold down to 32-bits so we don't loose in the typedef-less
+ network stack. */
+ /* 64 to 33 */
+ result = (result & 0xffffffff) + (result >> 32);
+ /* 33 to 32 */
+ result = (result & 0xffffffff) + (result >> 32);
+
+ pr_debug("%s saddr %x daddr %x len %x proto %x sum %x result %08Lx\n",
+ __FUNCTION__, saddr, daddr, len, proto, sum, result);
+
+ return result;
+}
+
+// Post SIM:
+unsigned int
+csum_partial_copy_nocheck(const unsigned char *src, unsigned char *dst, int len, unsigned int sum)
+{
+ // unsigned dummy;
+ pr_debug("csum_partial_copy_nocheck src %p dst %p len %d\n", src, dst,
+ len);
+
+ return csum_partial_copy(src, dst, len, sum);
+}
diff --git a/arch/sh64/lib/copy_user_memcpy.S b/arch/sh64/lib/copy_user_memcpy.S
new file mode 100644
index 000000000000..2a62816d2ddd
--- /dev/null
+++ b/arch/sh64/lib/copy_user_memcpy.S
@@ -0,0 +1,217 @@
+!
+! Fast SH memcpy
+!
+! by Toshiyasu Morita (tm@netcom.com)
+! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
+! SH5 code Copyright 2002 SuperH Ltd.
+!
+! Entry: ARG0: destination pointer
+! ARG1: source pointer
+! ARG2: byte count
+!
+! Exit: RESULT: destination pointer
+! any other registers in the range r0-r7: trashed
+!
+! Notes: Usually one wants to do small reads and write a longword, but
+! unfortunately it is difficult in some cases to concatanate bytes
+! into a longword on the SH, so this does a longword read and small
+! writes.
+!
+! This implementation makes two assumptions about how it is called:
+!
+! 1.: If the byte count is nonzero, the address of the last byte to be
+! copied is unsigned greater than the address of the first byte to
+! be copied. This could be easily swapped for a signed comparison,
+! but the algorithm used needs some comparison.
+!
+! 2.: When there are two or three bytes in the last word of an 11-or-more
+! bytes memory chunk to b copied, the rest of the word can be read
+! without side effects.
+! This could be easily changed by increasing the minumum size of
+! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
+! however, this would cost a few extra cyles on average.
+! For SHmedia, the assumption is that any quadword can be read in its
+! enirety if at least one byte is included in the copy.
+
+/* Imported into Linux kernel by Richard Curnow. This is used to implement the
+ __copy_user function in the general case, so it has to be a distinct
+ function from intra-kernel memcpy to allow for exception fix-ups in the
+ event that the user pointer is bad somewhere in the copy (e.g. due to
+ running off the end of the vma).
+
+ Note, this algorithm will be slightly wasteful in the case where the source
+ and destination pointers are equally aligned, because the stlo/sthi pairs
+ could then be merged back into single stores. If there are a lot of cache
+ misses, this is probably offset by the stall lengths on the preloads.
+
+*/
+
+/* NOTE : Prefetches removed and allocos guarded by synco to avoid TAKum03020
+ * erratum. The first two prefetches are nop-ed out to avoid upsetting the
+ * instruction counts used in the jump address calculation.
+ * */
+
+ .section .text..SHmedia32,"ax"
+ .little
+ .balign 32
+ .global copy_user_memcpy
+ .global copy_user_memcpy_end
+copy_user_memcpy:
+
+#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
+#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
+#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
+#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
+
+ nop ! ld.b r3,0,r63 ! TAKum03020
+ pta/l Large,tr0
+ movi 25,r0
+ bgeu/u r4,r0,tr0
+ nsb r4,r0
+ shlli r0,5,r0
+ movi (L1-L0+63*32 + 1) & 0xffff,r1
+ sub r1, r0, r0
+L0: ptrel r0,tr0
+ add r2,r4,r5
+ ptabs r18,tr1
+ add r3,r4,r6
+ blink tr0,r63
+
+/* Rearranged to make cut2 safe */
+ .balign 8
+L4_7: /* 4..7 byte memcpy cntd. */
+ stlo.l r2, 0, r0
+ or r6, r7, r6
+ sthi.l r5, -1, r6
+ stlo.l r5, -4, r6
+ blink tr1,r63
+
+ .balign 8
+L1: /* 0 byte memcpy */
+ nop
+ blink tr1,r63
+ nop
+ nop
+ nop
+ nop
+
+L2_3: /* 2 or 3 byte memcpy cntd. */
+ st.b r5,-1,r6
+ blink tr1,r63
+
+ /* 1 byte memcpy */
+ ld.b r3,0,r0
+ st.b r2,0,r0
+ blink tr1,r63
+
+L8_15: /* 8..15 byte memcpy cntd. */
+ stlo.q r2, 0, r0
+ or r6, r7, r6
+ sthi.q r5, -1, r6
+ stlo.q r5, -8, r6
+ blink tr1,r63
+
+ /* 2 or 3 byte memcpy */
+ ld.b r3,0,r0
+ nop ! ld.b r2,0,r63 ! TAKum03020
+ ld.b r3,1,r1
+ st.b r2,0,r0
+ pta/l L2_3,tr0
+ ld.b r6,-1,r6
+ st.b r2,1,r1
+ blink tr0, r63
+
+ /* 4 .. 7 byte memcpy */
+ LDUAL (r3, 0, r0, r1)
+ pta L4_7, tr0
+ ldlo.l r6, -4, r7
+ or r0, r1, r0
+ sthi.l r2, 3, r0
+ ldhi.l r6, -1, r6
+ blink tr0, r63
+
+ /* 8 .. 15 byte memcpy */
+ LDUAQ (r3, 0, r0, r1)
+ pta L8_15, tr0
+ ldlo.q r6, -8, r7
+ or r0, r1, r0
+ sthi.q r2, 7, r0
+ ldhi.q r6, -1, r6
+ blink tr0, r63
+
+ /* 16 .. 24 byte memcpy */
+ LDUAQ (r3, 0, r0, r1)
+ LDUAQ (r3, 8, r8, r9)
+ or r0, r1, r0
+ sthi.q r2, 7, r0
+ or r8, r9, r8
+ sthi.q r2, 15, r8
+ ldlo.q r6, -8, r7
+ ldhi.q r6, -1, r6
+ stlo.q r2, 8, r8
+ stlo.q r2, 0, r0
+ or r6, r7, r6
+ sthi.q r5, -1, r6
+ stlo.q r5, -8, r6
+ blink tr1,r63
+
+Large:
+ ! ld.b r2, 0, r63 ! TAKum03020
+ pta/l Loop_ua, tr1
+ ori r3, -8, r7
+ sub r2, r7, r22
+ sub r3, r2, r6
+ add r2, r4, r5
+ ldlo.q r3, 0, r0
+ addi r5, -16, r5
+ movi 64+8, r27 ! could subtract r7 from that.
+ stlo.q r2, 0, r0
+ sthi.q r2, 7, r0
+ ldx.q r22, r6, r0
+ bgtu/l r27, r4, tr1
+
+ addi r5, -48, r27
+ pta/l Loop_line, tr0
+ addi r6, 64, r36
+ addi r6, -24, r19
+ addi r6, -16, r20
+ addi r6, -8, r21
+
+Loop_line:
+ ! ldx.q r22, r36, r63 ! TAKum03020
+ alloco r22, 32
+ synco
+ addi r22, 32, r22
+ ldx.q r22, r19, r23
+ sthi.q r22, -25, r0
+ ldx.q r22, r20, r24
+ ldx.q r22, r21, r25
+ stlo.q r22, -32, r0
+ ldx.q r22, r6, r0
+ sthi.q r22, -17, r23
+ sthi.q r22, -9, r24
+ sthi.q r22, -1, r25
+ stlo.q r22, -24, r23
+ stlo.q r22, -16, r24
+ stlo.q r22, -8, r25
+ bgeu r27, r22, tr0
+
+Loop_ua:
+ addi r22, 8, r22
+ sthi.q r22, -1, r0
+ stlo.q r22, -8, r0
+ ldx.q r22, r6, r0
+ bgtu/l r5, r22, tr1
+
+ add r3, r4, r7
+ ldlo.q r7, -8, r1
+ sthi.q r22, 7, r0
+ ldhi.q r7, -1, r7
+ ptabs r18,tr1
+ stlo.q r22, 0, r0
+ or r1, r7, r1
+ sthi.q r5, 15, r1
+ stlo.q r5, 8, r1
+ blink tr1, r63
+copy_user_memcpy_end:
+ nop
diff --git a/arch/sh64/lib/dbg.c b/arch/sh64/lib/dbg.c
new file mode 100644
index 000000000000..526fedae6db8
--- /dev/null
+++ b/arch/sh64/lib/dbg.c
@@ -0,0 +1,430 @@
+/*--------------------------------------------------------------------------
+--
+-- Identity : Linux50 Debug Funcions
+--
+-- File : arch/sh64/lib/dbg.C
+--
+-- Copyright 2000, 2001 STMicroelectronics Limited.
+-- Copyright 2004 Richard Curnow (evt_debug etc)
+--
+--------------------------------------------------------------------------*/
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+
+typedef u64 regType_t;
+
+static regType_t getConfigReg(u64 id)
+{
+ register u64 reg __asm__("r2");
+ asm volatile ("getcfg %1, 0, %0":"=r" (reg):"r"(id));
+ return (reg);
+}
+
+/* ======================================================================= */
+
+static char *szTab[] = { "4k", "64k", "1M", "512M" };
+static char *protTab[] = { "----",
+ "---R",
+ "--X-",
+ "--XR",
+ "-W--",
+ "-W-R",
+ "-WX-",
+ "-WXR",
+ "U---",
+ "U--R",
+ "U-X-",
+ "U-XR",
+ "UW--",
+ "UW-R",
+ "UWX-",
+ "UWXR"
+};
+#define ITLB_BASE 0x00000000
+#define DTLB_BASE 0x00800000
+#define MAX_TLBs 64
+/* PTE High */
+#define GET_VALID(pte) ((pte) & 0x1)
+#define GET_SHARED(pte) ((pte) & 0x2)
+#define GET_ASID(pte) ((pte >> 2) & 0x0ff)
+#define GET_EPN(pte) ((pte) & 0xfffff000)
+
+/* PTE Low */
+#define GET_CBEHAVIOR(pte) ((pte) & 0x3)
+#define GET_PAGE_SIZE(pte) szTab[((pte >> 3) & 0x3)]
+#define GET_PROTECTION(pte) protTab[((pte >> 6) & 0xf)]
+#define GET_PPN(pte) ((pte) & 0xfffff000)
+
+#define PAGE_1K_MASK 0x00000000
+#define PAGE_4K_MASK 0x00000010
+#define PAGE_64K_MASK 0x00000080
+#define MMU_PAGESIZE_MASK (PAGE_64K_MASK | PAGE_4K_MASK)
+#define PAGE_1MB_MASK MMU_PAGESIZE_MASK
+#define PAGE_1K (1024)
+#define PAGE_4K (1024 * 4)
+#define PAGE_64K (1024 * 64)
+#define PAGE_1MB (1024 * 1024)
+
+#define HOW_TO_READ_TLB_CONTENT \
+ "[ ID] PPN EPN ASID Share CB P.Size PROT.\n"
+
+void print_single_tlb(unsigned long tlb, int single_print)
+{
+ regType_t pteH;
+ regType_t pteL;
+ unsigned int valid, shared, asid, epn, cb, ppn;
+ char *pSize;
+ char *pProt;
+
+ /*
+ ** in case of single print <single_print> is true, this implies:
+ ** 1) print the TLB in any case also if NOT VALID
+ ** 2) print out the header
+ */
+
+ pteH = getConfigReg(tlb);
+ valid = GET_VALID(pteH);
+ if (single_print)
+ printk(HOW_TO_READ_TLB_CONTENT);
+ else if (!valid)
+ return;
+
+ pteL = getConfigReg(tlb + 1);
+
+ shared = GET_SHARED(pteH);
+ asid = GET_ASID(pteH);
+ epn = GET_EPN(pteH);
+ cb = GET_CBEHAVIOR(pteL);
+ pSize = GET_PAGE_SIZE(pteL);
+ pProt = GET_PROTECTION(pteL);
+ ppn = GET_PPN(pteL);
+ printk("[%c%2ld] 0x%08x 0x%08x %03d %02x %02x %4s %s\n",
+ ((valid) ? ' ' : 'u'), ((tlb & 0x0ffff) / TLB_STEP),
+ ppn, epn, asid, shared, cb, pSize, pProt);
+}
+
+void print_dtlb(void)
+{
+ int count;
+ unsigned long tlb;
+
+ printk(" ================= SH-5 D-TLBs Status ===================\n");
+ printk(HOW_TO_READ_TLB_CONTENT);
+ tlb = DTLB_BASE;
+ for (count = 0; count < MAX_TLBs; count++, tlb += TLB_STEP)
+ print_single_tlb(tlb, 0);
+ printk
+ (" =============================================================\n");
+}
+
+void print_itlb(void)
+{
+ int count;
+ unsigned long tlb;
+
+ printk(" ================= SH-5 I-TLBs Status ===================\n");
+ printk(HOW_TO_READ_TLB_CONTENT);
+ tlb = ITLB_BASE;
+ for (count = 0; count < MAX_TLBs; count++, tlb += TLB_STEP)
+ print_single_tlb(tlb, 0);
+ printk
+ (" =============================================================\n");
+}
+
+/* ======================================================================= */
+
+#ifdef CONFIG_POOR_MANS_STRACE
+
+#include "syscalltab.h"
+
+struct ring_node {
+ int evt;
+ int ret_addr;
+ int event;
+ int tra;
+ int pid;
+ unsigned long sp;
+ unsigned long pc;
+};
+
+static struct ring_node event_ring[16];
+static int event_ptr = 0;
+
+struct stored_syscall_data {
+ int pid;
+ int syscall_number;
+};
+
+#define N_STORED_SYSCALLS 16
+
+static struct stored_syscall_data stored_syscalls[N_STORED_SYSCALLS];
+static int syscall_next=0;
+static int syscall_next_print=0;
+
+void evt_debug(int evt, int ret_addr, int event, int tra, struct pt_regs *regs)
+{
+ int syscallno = tra & 0xff;
+ unsigned long sp;
+ unsigned long stack_bottom;
+ int pid;
+ struct ring_node *rr;
+
+ pid = current->pid;
+ stack_bottom = (unsigned long) current->thread_info;
+ asm volatile("ori r15, 0, %0" : "=r" (sp));
+ rr = event_ring + event_ptr;
+ rr->evt = evt;
+ rr->ret_addr = ret_addr;
+ rr->event = event;
+ rr->tra = tra;
+ rr->pid = pid;
+ rr->sp = sp;
+ rr->pc = regs->pc;
+
+ if (sp < stack_bottom + 3092) {
+ printk("evt_debug : stack underflow report\n");
+ int i, j;
+ for (j=0, i = event_ptr; j<16; j++) {
+ rr = event_ring + i;
+ printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n",
+ rr->evt, rr->event, rr->tra, rr->pid, rr->sp, rr->pc);
+ i--;
+ i &= 15;
+ }
+ panic("STACK UNDERFLOW\n");
+ }
+
+ event_ptr = (event_ptr + 1) & 15;
+
+ if ((event == 2) && (evt == 0x160)) {
+ if (syscallno < NUM_SYSCALL_INFO_ENTRIES) {
+ /* Store the syscall information to print later. We
+ * can't print this now - currently we're running with
+ * SR.BL=1, so we can't take a tlbmiss (which could occur
+ * in the console drivers under printk).
+ *
+ * Just overwrite old entries on ring overflow - this
+ * is only for last-hope debugging. */
+ stored_syscalls[syscall_next].pid = current->pid;
+ stored_syscalls[syscall_next].syscall_number = syscallno;
+ syscall_next++;
+ syscall_next &= (N_STORED_SYSCALLS - 1);
+ }
+ }
+}
+
+static void drain_syscalls(void) {
+ while (syscall_next_print != syscall_next) {
+ printk("Task %d: %s()\n",
+ stored_syscalls[syscall_next_print].pid,
+ syscall_info_table[stored_syscalls[syscall_next_print].syscall_number].name);
+ syscall_next_print++;
+ syscall_next_print &= (N_STORED_SYSCALLS - 1);
+ }
+}
+
+void evt_debug2(unsigned int ret)
+{
+ drain_syscalls();
+ printk("Task %d: syscall returns %08x\n", current->pid, ret);
+}
+
+void evt_debug_ret_from_irq(struct pt_regs *regs)
+{
+ int pid;
+ struct ring_node *rr;
+
+ pid = current->pid;
+ rr = event_ring + event_ptr;
+ rr->evt = 0xffff;
+ rr->ret_addr = 0;
+ rr->event = 0;
+ rr->tra = 0;
+ rr->pid = pid;
+ rr->pc = regs->pc;
+ event_ptr = (event_ptr + 1) & 15;
+}
+
+void evt_debug_ret_from_exc(struct pt_regs *regs)
+{
+ int pid;
+ struct ring_node *rr;
+
+ pid = current->pid;
+ rr = event_ring + event_ptr;
+ rr->evt = 0xfffe;
+ rr->ret_addr = 0;
+ rr->event = 0;
+ rr->tra = 0;
+ rr->pid = pid;
+ rr->pc = regs->pc;
+ event_ptr = (event_ptr + 1) & 15;
+}
+
+#endif /* CONFIG_POOR_MANS_STRACE */
+
+/* ======================================================================= */
+
+void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs)
+{
+
+ unsigned long long ah, al, bh, bl, ch, cl;
+
+ printk("\n");
+ printk("EXCEPTION - %s: task %d; Linux trap # %d; signal = %d\n",
+ ((from) ? from : "???"), current->pid, trapnr, signr);
+
+ asm volatile ("getcon " __EXPEVT ", %0":"=r"(ah));
+ asm volatile ("getcon " __EXPEVT ", %0":"=r"(al));
+ ah = (ah) >> 32;
+ al = (al) & 0xffffffff;
+ asm volatile ("getcon " __KCR1 ", %0":"=r"(bh));
+ asm volatile ("getcon " __KCR1 ", %0":"=r"(bl));
+ bh = (bh) >> 32;
+ bl = (bl) & 0xffffffff;
+ asm volatile ("getcon " __INTEVT ", %0":"=r"(ch));
+ asm volatile ("getcon " __INTEVT ", %0":"=r"(cl));
+ ch = (ch) >> 32;
+ cl = (cl) & 0xffffffff;
+ printk("EXPE: %08Lx%08Lx KCR1: %08Lx%08Lx INTE: %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ asm volatile ("getcon " __PEXPEVT ", %0":"=r"(ah));
+ asm volatile ("getcon " __PEXPEVT ", %0":"=r"(al));
+ ah = (ah) >> 32;
+ al = (al) & 0xffffffff;
+ asm volatile ("getcon " __PSPC ", %0":"=r"(bh));
+ asm volatile ("getcon " __PSPC ", %0":"=r"(bl));
+ bh = (bh) >> 32;
+ bl = (bl) & 0xffffffff;
+ asm volatile ("getcon " __PSSR ", %0":"=r"(ch));
+ asm volatile ("getcon " __PSSR ", %0":"=r"(cl));
+ ch = (ch) >> 32;
+ cl = (cl) & 0xffffffff;
+ printk("PEXP: %08Lx%08Lx PSPC: %08Lx%08Lx PSSR: %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->pc) >> 32;
+ al = (regs->pc) & 0xffffffff;
+ bh = (regs->regs[18]) >> 32;
+ bl = (regs->regs[18]) & 0xffffffff;
+ ch = (regs->regs[15]) >> 32;
+ cl = (regs->regs[15]) & 0xffffffff;
+ printk("PC : %08Lx%08Lx LINK: %08Lx%08Lx SP : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->sr) >> 32;
+ al = (regs->sr) & 0xffffffff;
+ asm volatile ("getcon " __TEA ", %0":"=r"(bh));
+ asm volatile ("getcon " __TEA ", %0":"=r"(bl));
+ bh = (bh) >> 32;
+ bl = (bl) & 0xffffffff;
+ asm volatile ("getcon " __KCR0 ", %0":"=r"(ch));
+ asm volatile ("getcon " __KCR0 ", %0":"=r"(cl));
+ ch = (ch) >> 32;
+ cl = (cl) & 0xffffffff;
+ printk("SR : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[0]) >> 32;
+ al = (regs->regs[0]) & 0xffffffff;
+ bh = (regs->regs[1]) >> 32;
+ bl = (regs->regs[1]) & 0xffffffff;
+ ch = (regs->regs[2]) >> 32;
+ cl = (regs->regs[2]) & 0xffffffff;
+ printk("R0 : %08Lx%08Lx R1 : %08Lx%08Lx R2 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[3]) >> 32;
+ al = (regs->regs[3]) & 0xffffffff;
+ bh = (regs->regs[4]) >> 32;
+ bl = (regs->regs[4]) & 0xffffffff;
+ ch = (regs->regs[5]) >> 32;
+ cl = (regs->regs[5]) & 0xffffffff;
+ printk("R3 : %08Lx%08Lx R4 : %08Lx%08Lx R5 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[6]) >> 32;
+ al = (regs->regs[6]) & 0xffffffff;
+ bh = (regs->regs[7]) >> 32;
+ bl = (regs->regs[7]) & 0xffffffff;
+ ch = (regs->regs[8]) >> 32;
+ cl = (regs->regs[8]) & 0xffffffff;
+ printk("R6 : %08Lx%08Lx R7 : %08Lx%08Lx R8 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+
+ ah = (regs->regs[9]) >> 32;
+ al = (regs->regs[9]) & 0xffffffff;
+ bh = (regs->regs[10]) >> 32;
+ bl = (regs->regs[10]) & 0xffffffff;
+ ch = (regs->regs[11]) >> 32;
+ cl = (regs->regs[11]) & 0xffffffff;
+ printk("R9 : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+ printk("....\n");
+
+ ah = (regs->tregs[0]) >> 32;
+ al = (regs->tregs[0]) & 0xffffffff;
+ bh = (regs->tregs[1]) >> 32;
+ bl = (regs->tregs[1]) & 0xffffffff;
+ ch = (regs->tregs[2]) >> 32;
+ cl = (regs->tregs[2]) & 0xffffffff;
+ printk("T0 : %08Lx%08Lx T1 : %08Lx%08Lx T2 : %08Lx%08Lx\n",
+ ah, al, bh, bl, ch, cl);
+ printk("....\n");
+
+ print_dtlb();
+ print_itlb();
+}
+
+/* ======================================================================= */
+
+/*
+** Depending on <base> scan the MMU, Data or Instrction side
+** looking for a valid mapping matching Eaddr & asid.
+** Return -1 if not found or the TLB id entry otherwise.
+** Note: it works only for 4k pages!
+*/
+static unsigned long
+lookup_mmu_side(unsigned long base, unsigned long Eaddr, unsigned long asid)
+{
+ regType_t pteH;
+ unsigned long epn;
+ int count;
+
+ epn = Eaddr & 0xfffff000;
+
+ for (count = 0; count < MAX_TLBs; count++, base += TLB_STEP) {
+ pteH = getConfigReg(base);
+ if (GET_VALID(pteH))
+ if ((unsigned long) GET_EPN(pteH) == epn)
+ if ((unsigned long) GET_ASID(pteH) == asid)
+ break;
+ }
+ return ((unsigned long) ((count < MAX_TLBs) ? base : -1));
+}
+
+unsigned long lookup_dtlb(unsigned long Eaddr)
+{
+ unsigned long asid = get_asid();
+ return (lookup_mmu_side((u64) DTLB_BASE, Eaddr, asid));
+}
+
+unsigned long lookup_itlb(unsigned long Eaddr)
+{
+ unsigned long asid = get_asid();
+ return (lookup_mmu_side((u64) ITLB_BASE, Eaddr, asid));
+}
+
+void print_page(struct page *page)
+{
+ printk(" page[%p] -> index 0x%lx, count 0x%x, flags 0x%lx\n",
+ page, page->index, page_count(page), page->flags);
+ printk(" address_space = %p, pages =%ld\n", page->mapping,
+ page->mapping->nrpages);
+
+}
diff --git a/arch/sh64/lib/io.c b/arch/sh64/lib/io.c
new file mode 100644
index 000000000000..277e11b10c2b
--- /dev/null
+++ b/arch/sh64/lib/io.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * This file contains the I/O routines for use on the overdrive board
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the SuperH architecture, we just read/write the
+ * memory location directly.
+ */
+
+/* This is horrible at the moment - needs more work to do something sensible */
+#define IO_DELAY()
+
+#define OUT_DELAY(x,type) \
+void out##x##_p(unsigned type value,unsigned long port){out##x(value,port);IO_DELAY();}
+
+#define IN_DELAY(x,type) \
+unsigned type in##x##_p(unsigned long port) {unsigned type tmp=in##x(port);IO_DELAY();return tmp;}
+
+#if 1
+OUT_DELAY(b, long) OUT_DELAY(w, long) OUT_DELAY(l, long)
+ IN_DELAY(b, long) IN_DELAY(w, long) IN_DELAY(l, long)
+#endif
+/* Now for the string version of these functions */
+void outsb(unsigned long port, const void *addr, unsigned long count)
+{
+ int i;
+ unsigned char *p = (unsigned char *) addr;
+
+ for (i = 0; i < count; i++, p++) {
+ outb(*p, port);
+ }
+}
+
+void insb(unsigned long port, void *addr, unsigned long count)
+{
+ int i;
+ unsigned char *p = (unsigned char *) addr;
+
+ for (i = 0; i < count; i++, p++) {
+ *p = inb(port);
+ }
+}
+
+/* For the 16 and 32 bit string functions, we have to worry about alignment.
+ * The SH does not do unaligned accesses, so we have to read as bytes and
+ * then write as a word or dword.
+ * This can be optimised a lot more, especially in the case where the data
+ * is aligned
+ */
+
+void outsw(unsigned long port, const void *addr, unsigned long count)
+{
+ int i;
+ unsigned short tmp;
+ unsigned char *p = (unsigned char *) addr;
+
+ for (i = 0; i < count; i++, p += 2) {
+ tmp = (*p) | ((*(p + 1)) << 8);
+ outw(tmp, port);
+ }
+}
+
+void insw(unsigned long port, void *addr, unsigned long count)
+{
+ int i;
+ unsigned short tmp;
+ unsigned char *p = (unsigned char *) addr;
+
+ for (i = 0; i < count; i++, p += 2) {
+ tmp = inw(port);
+ p[0] = tmp & 0xff;
+ p[1] = (tmp >> 8) & 0xff;
+ }
+}
+
+void outsl(unsigned long port, const void *addr, unsigned long count)
+{
+ int i;
+ unsigned tmp;
+ unsigned char *p = (unsigned char *) addr;
+
+ for (i = 0; i < count; i++, p += 4) {
+ tmp = (*p) | ((*(p + 1)) << 8) | ((*(p + 2)) << 16) |
+ ((*(p + 3)) << 24);
+ outl(tmp, port);
+ }
+}
+
+void insl(unsigned long port, void *addr, unsigned long count)
+{
+ int i;
+ unsigned tmp;
+ unsigned char *p = (unsigned char *) addr;
+
+ for (i = 0; i < count; i++, p += 4) {
+ tmp = inl(port);
+ p[0] = tmp & 0xff;
+ p[1] = (tmp >> 8) & 0xff;
+ p[2] = (tmp >> 16) & 0xff;
+ p[3] = (tmp >> 24) & 0xff;
+
+ }
+}
+
+void memcpy_toio(void __iomem *to, const void *from, long count)
+{
+ unsigned char *p = (unsigned char *) from;
+
+ while (count) {
+ count--;
+ writeb(*p++, to++);
+ }
+}
+
+void memcpy_fromio(void *to, void __iomem *from, long count)
+{
+ int i;
+ unsigned char *p = (unsigned char *) to;
+
+ for (i = 0; i < count; i++) {
+ p[i] = readb(from);
+ from++;
+ }
+}
diff --git a/arch/sh64/lib/iomap.c b/arch/sh64/lib/iomap.c
new file mode 100644
index 000000000000..83c5f0c04958
--- /dev/null
+++ b/arch/sh64/lib/iomap.c
@@ -0,0 +1,55 @@
+/*
+ * arch/sh64/lib/iomap.c
+ *
+ * Generic sh64 iomap interface
+ *
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+void __iomem *__attribute__ ((weak))
+ioport_map(unsigned long port, unsigned int len)
+{
+ return (void __iomem *)port;
+}
+
+void ioport_unmap(void __iomem *addr)
+{
+ /* Nothing .. */
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len)
+ return NULL;
+ if (max && len > max)
+ len = max;
+ if (flags & IORESOURCE_IO)
+ return ioport_map(start + pciio_virt, len);
+ if (flags & IORESOURCE_MEM)
+ return (void __iomem *)start;
+
+ /* What? */
+ return NULL;
+}
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+ /* Nothing .. */
+}
+
+EXPORT_SYMBOL(ioport_map);
+EXPORT_SYMBOL(ioport_unmap);
+EXPORT_SYMBOL(pci_iomap);
+EXPORT_SYMBOL(pci_iounmap);
+
diff --git a/arch/sh64/lib/memcpy.c b/arch/sh64/lib/memcpy.c
new file mode 100644
index 000000000000..c785d0aa194d
--- /dev/null
+++ b/arch/sh64/lib/memcpy.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2002 Mark Debbage (Mark.Debbage@superh.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/string.h>
+
+// This is a simplistic optimization of memcpy to increase the
+// granularity of access beyond one byte using aligned
+// loads and stores. This is not an optimal implementation
+// for SH-5 (especially with regard to prefetching and the cache),
+// and a better version should be provided later ...
+
+void *memcpy(void *dest, const void *src, size_t count)
+{
+ char *d = (char *) dest, *s = (char *) src;
+
+ if (count >= 32) {
+ int i = 8 - (((unsigned long) d) & 0x7);
+
+ if (i != 8)
+ while (i-- && count--) {
+ *d++ = *s++;
+ }
+
+ if (((((unsigned long) d) & 0x7) == 0) &&
+ ((((unsigned long) s) & 0x7) == 0)) {
+ while (count >= 32) {
+ unsigned long long t1, t2, t3, t4;
+ t1 = *(unsigned long long *) (s);
+ t2 = *(unsigned long long *) (s + 8);
+ t3 = *(unsigned long long *) (s + 16);
+ t4 = *(unsigned long long *) (s + 24);
+ *(unsigned long long *) (d) = t1;
+ *(unsigned long long *) (d + 8) = t2;
+ *(unsigned long long *) (d + 16) = t3;
+ *(unsigned long long *) (d + 24) = t4;
+ d += 32;
+ s += 32;
+ count -= 32;
+ }
+ while (count >= 8) {
+ *(unsigned long long *) d =
+ *(unsigned long long *) s;
+ d += 8;
+ s += 8;
+ count -= 8;
+ }
+ }
+
+ if (((((unsigned long) d) & 0x3) == 0) &&
+ ((((unsigned long) s) & 0x3) == 0)) {
+ while (count >= 4) {
+ *(unsigned long *) d = *(unsigned long *) s;
+ d += 4;
+ s += 4;
+ count -= 4;
+ }
+ }
+
+ if (((((unsigned long) d) & 0x1) == 0) &&
+ ((((unsigned long) s) & 0x1) == 0)) {
+ while (count >= 2) {
+ *(unsigned short *) d = *(unsigned short *) s;
+ d += 2;
+ s += 2;
+ count -= 2;
+ }
+ }
+ }
+
+ while (count--) {
+ *d++ = *s++;
+ }
+
+ return d;
+}
diff --git a/arch/sh64/lib/page_clear.S b/arch/sh64/lib/page_clear.S
new file mode 100644
index 000000000000..ac0111d669a3
--- /dev/null
+++ b/arch/sh64/lib/page_clear.S
@@ -0,0 +1,54 @@
+/*
+ Copyright 2003 Richard Curnow, SuperH (UK) Ltd.
+
+ This file is subject to the terms and conditions of the GNU General Public
+ License. See the file "COPYING" in the main directory of this archive
+ for more details.
+
+ Tight version of memset for the case of just clearing a page. It turns out
+ that having the alloco's spaced out slightly due to the increment/branch
+ pair causes them to contend less for access to the cache. Similarly,
+ keeping the stores apart from the allocos causes less contention. => Do two
+ separate loops. Do multiple stores per loop to amortise the
+ increment/branch cost a little.
+
+ Parameters:
+ r2 : source effective address (start of page)
+
+ Always clears 4096 bytes.
+
+ Note : alloco guarded by synco to avoid TAKum03020 erratum
+
+*/
+
+ .section .text..SHmedia32,"ax"
+ .little
+
+ .balign 8
+ .global sh64_page_clear
+sh64_page_clear:
+ pta/l 1f, tr1
+ pta/l 2f, tr2
+ ptabs/l r18, tr0
+
+ movi 4096, r7
+ add r2, r7, r7
+ add r2, r63, r6
+1:
+ alloco r6, 0
+ synco ! TAKum03020
+ addi r6, 32, r6
+ bgt/l r7, r6, tr1
+
+ add r2, r63, r6
+2:
+ st.q r6, 0, r63
+ st.q r6, 8, r63
+ st.q r6, 16, r63
+ st.q r6, 24, r63
+ addi r6, 32, r6
+ bgt/l r7, r6, tr2
+
+ blink tr0, r63
+
+
diff --git a/arch/sh64/lib/page_copy.S b/arch/sh64/lib/page_copy.S
new file mode 100644
index 000000000000..e159c3cd2582
--- /dev/null
+++ b/arch/sh64/lib/page_copy.S
@@ -0,0 +1,91 @@
+/*
+ Copyright 2003 Richard Curnow, SuperH (UK) Ltd.
+
+ This file is subject to the terms and conditions of the GNU General Public
+ License. See the file "COPYING" in the main directory of this archive
+ for more details.
+
+ Tight version of mempy for the case of just copying a page.
+ Prefetch strategy empirically optimised against RTL simulations
+ of SH5-101 cut2 eval chip with Cayman board DDR memory.
+
+ Parameters:
+ r2 : source effective address (start of page)
+ r3 : destination effective address (start of page)
+
+ Always copies 4096 bytes.
+
+ Points to review.
+ * Currently the prefetch is 4 lines ahead and the alloco is 2 lines ahead.
+ It seems like the prefetch needs to be at at least 4 lines ahead to get
+ the data into the cache in time, and the allocos contend with outstanding
+ prefetches for the same cache set, so it's better to have the numbers
+ different.
+ */
+
+ .section .text..SHmedia32,"ax"
+ .little
+
+ .balign 8
+ .global sh64_page_copy
+sh64_page_copy:
+
+ /* Copy 4096 bytes worth of data from r2 to r3.
+ Do prefetches 4 lines ahead.
+ Do alloco 2 lines ahead */
+
+ pta 1f, tr1
+ pta 2f, tr2
+ pta 3f, tr3
+ ptabs r18, tr0
+
+#if 0
+ /* TAKum03020 */
+ ld.q r2, 0x00, r63
+ ld.q r2, 0x20, r63
+ ld.q r2, 0x40, r63
+ ld.q r2, 0x60, r63
+#endif
+ alloco r3, 0x00
+ synco ! TAKum03020
+ alloco r3, 0x20
+ synco ! TAKum03020
+
+ movi 3968, r6
+ add r3, r6, r6
+ addi r6, 64, r7
+ addi r7, 64, r8
+ sub r2, r3, r60
+ addi r60, 8, r61
+ addi r61, 8, r62
+ addi r62, 8, r23
+ addi r60, 0x80, r22
+
+/* Minimal code size. The extra branches inside the loop don't cost much
+ because they overlap with the time spent waiting for prefetches to
+ complete. */
+1:
+#if 0
+ /* TAKum03020 */
+ bge/u r3, r6, tr2 ! skip prefetch for last 4 lines
+ ldx.q r3, r22, r63 ! prefetch 4 lines hence
+#endif
+2:
+ bge/u r3, r7, tr3 ! skip alloco for last 2 lines
+ alloco r3, 0x40 ! alloc destination line 2 lines ahead
+ synco ! TAKum03020
+3:
+ ldx.q r3, r60, r36
+ ldx.q r3, r61, r37
+ ldx.q r3, r62, r38
+ ldx.q r3, r23, r39
+ st.q r3, 0, r36
+ st.q r3, 8, r37
+ st.q r3, 16, r38
+ st.q r3, 24, r39
+ addi r3, 32, r3
+ bgt/l r8, r3, tr1
+
+ blink tr0, r63 ! return
+
+
diff --git a/arch/sh64/lib/panic.c b/arch/sh64/lib/panic.c
new file mode 100644
index 000000000000..c9eb1cb50d97
--- /dev/null
+++ b/arch/sh64/lib/panic.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2003 Richard Curnow, SuperH UK Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/registers.h>
+
+/* THIS IS A PHYSICAL ADDRESS */
+#define HDSP2534_ADDR (0x04002100)
+
+#ifdef CONFIG_SH_CAYMAN
+
+static void poor_mans_delay(void)
+{
+ int i;
+ for (i = 0; i < 2500000; i++) {
+ } /* poor man's delay */
+}
+
+static void show_value(unsigned long x)
+{
+ int i;
+ unsigned nibble;
+ for (i = 0; i < 8; i++) {
+ nibble = ((x >> (i * 4)) & 0xf);
+
+ ctrl_outb(nibble + ((nibble > 9) ? 55 : 48),
+ HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
+ }
+}
+
+#endif
+
+void
+panic_handler(unsigned long panicPC, unsigned long panicSSR,
+ unsigned long panicEXPEVT)
+{
+#ifdef CONFIG_SH_CAYMAN
+ while (1) {
+ /* This piece of code displays the PC on the LED display */
+ show_value(panicPC);
+ poor_mans_delay();
+ show_value(panicSSR);
+ poor_mans_delay();
+ show_value(panicEXPEVT);
+ poor_mans_delay();
+ }
+#endif
+
+ /* Never return from the panic handler */
+ for (;;) ;
+
+}
diff --git a/arch/sh64/lib/udelay.c b/arch/sh64/lib/udelay.c
new file mode 100644
index 000000000000..dad2f254efee
--- /dev/null
+++ b/arch/sh64/lib/udelay.c
@@ -0,0 +1,60 @@
+/*
+ * arch/sh64/lib/udelay.c
+ *
+ * Delay routines, using a pre-computed "loops_per_jiffy" value.
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003, 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/param.h>
+
+extern unsigned long loops_per_jiffy;
+
+/*
+ * Use only for very small delays (< 1 msec).
+ *
+ * The active part of our cycle counter is only 32-bits wide, and
+ * we're treating the difference between two marks as signed. On
+ * a 1GHz box, that's about 2 seconds.
+ */
+
+void __delay(int loops)
+{
+ long long dummy;
+ __asm__ __volatile__("gettr tr0, %1\n\t"
+ "pta $+4, tr0\n\t"
+ "addi %0, -1, %0\n\t"
+ "bne %0, r63, tr0\n\t"
+ "ptabs %1, tr0\n\t":"=r"(loops),
+ "=r"(dummy)
+ :"0"(loops));
+}
+
+void __udelay(unsigned long long usecs, unsigned long lpj)
+{
+ usecs *= (((unsigned long long) HZ << 32) / 1000000) * lpj;
+ __delay((long long) usecs >> 32);
+}
+
+void __ndelay(unsigned long long nsecs, unsigned long lpj)
+{
+ nsecs *= (((unsigned long long) HZ << 32) / 1000000000) * lpj;
+ __delay((long long) nsecs >> 32);
+}
+
+void udelay(unsigned long usecs)
+{
+ __udelay(usecs, loops_per_jiffy);
+}
+
+void ndelay(unsigned long nsecs)
+{
+ __ndelay(nsecs, loops_per_jiffy);
+}
+
diff --git a/arch/sh64/mach-cayman/Makefile b/arch/sh64/mach-cayman/Makefile
new file mode 100644
index 000000000000..67a2258bf8c4
--- /dev/null
+++ b/arch/sh64/mach-cayman/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Hitachi Cayman specific parts of the kernel
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y := setup.o irq.o iomap.o
+obj-$(CONFIG_HEARTBEAT) += led.o
+
diff --git a/arch/sh64/mach-cayman/iomap.c b/arch/sh64/mach-cayman/iomap.c
new file mode 100644
index 000000000000..d6a538c70709
--- /dev/null
+++ b/arch/sh64/mach-cayman/iomap.c
@@ -0,0 +1,24 @@
+/*
+ * arch/sh64/mach-cayman/iomap.c
+ *
+ * Cayman iomap interface
+ *
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/cayman.h>
+
+void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+ if (port < 0x400)
+ return (void __iomem *)((port << 2) | smsc_superio_virt);
+
+ return (void __iomem *)port;
+}
+
diff --git a/arch/sh64/mach-cayman/irq.c b/arch/sh64/mach-cayman/irq.c
new file mode 100644
index 000000000000..f797c84bfdd1
--- /dev/null
+++ b/arch/sh64/mach-cayman/irq.c
@@ -0,0 +1,196 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/irq_cayman.c
+ *
+ * SH-5 Cayman Interrupt Support
+ *
+ * This file handles the board specific parts of the Cayman interrupt system
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ */
+
+#include <linux/config.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <asm/cayman.h>
+
+unsigned long epld_virt;
+
+#define EPLD_BASE 0x04002000
+#define EPLD_STATUS_BASE (epld_virt + 0x10)
+#define EPLD_MASK_BASE (epld_virt + 0x20)
+
+/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
+ the same SH-5 interrupt */
+
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id, struct pt_regs *regs)
+{
+ printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
+ return IRQ_NONE;
+}
+
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id, struct pt_regs *regs)
+{
+ printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
+ return IRQ_NONE;
+}
+
+static struct irqaction cayman_action_smsc = {
+ .name = "Cayman SMSC Mux",
+ .handler = cayman_interrupt_smsc,
+ .flags = SA_INTERRUPT,
+};
+
+static struct irqaction cayman_action_pci2 = {
+ .name = "Cayman PCI2 Mux",
+ .handler = cayman_interrupt_pci2,
+ .flags = SA_INTERRUPT,
+};
+
+static void enable_cayman_irq(unsigned int irq)
+{
+ unsigned long flags;
+ unsigned long mask;
+ unsigned int reg;
+ unsigned char bit;
+
+ irq -= START_EXT_IRQS;
+ reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+ bit = 1<<(irq % 8);
+ local_irq_save(flags);
+ mask = ctrl_inl(reg);
+ mask |= bit;
+ ctrl_outl(mask, reg);
+ local_irq_restore(flags);
+}
+
+void disable_cayman_irq(unsigned int irq)
+{
+ unsigned long flags;
+ unsigned long mask;
+ unsigned int reg;
+ unsigned char bit;
+
+ irq -= START_EXT_IRQS;
+ reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+ bit = 1<<(irq % 8);
+ local_irq_save(flags);
+ mask = ctrl_inl(reg);
+ mask &= ~bit;
+ ctrl_outl(mask, reg);
+ local_irq_restore(flags);
+}
+
+static void ack_cayman_irq(unsigned int irq)
+{
+ disable_cayman_irq(irq);
+}
+
+static void end_cayman_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_cayman_irq(irq);
+}
+
+static unsigned int startup_cayman_irq(unsigned int irq)
+{
+ enable_cayman_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static void shutdown_cayman_irq(unsigned int irq)
+{
+ disable_cayman_irq(irq);
+}
+
+struct hw_interrupt_type cayman_irq_type = {
+ .typename = "Cayman-IRQ",
+ .startup = startup_cayman_irq,
+ .shutdown = shutdown_cayman_irq,
+ .enable = enable_cayman_irq,
+ .disable = disable_cayman_irq,
+ .ack = ack_cayman_irq,
+ .end = end_cayman_irq,
+};
+
+int cayman_irq_demux(int evt)
+{
+ int irq = intc_evt_to_irq[evt];
+
+ if (irq == SMSC_IRQ) {
+ unsigned long status;
+ int i;
+
+ status = ctrl_inl(EPLD_STATUS_BASE) &
+ ctrl_inl(EPLD_MASK_BASE) & 0xff;
+ if (status == 0) {
+ irq = -1;
+ } else {
+ for (i=0; i<8; i++) {
+ if (status & (1<<i))
+ break;
+ }
+ irq = START_EXT_IRQS + i;
+ }
+ }
+
+ if (irq == PCI2_IRQ) {
+ unsigned long status;
+ int i;
+
+ status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+ ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+ if (status == 0) {
+ irq = -1;
+ } else {
+ for (i=0; i<8; i++) {
+ if (status & (1<<i))
+ break;
+ }
+ irq = START_EXT_IRQS + (3 * 8) + i;
+ }
+ }
+
+ return irq;
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int cayman_irq_describe(char* p, int irq)
+{
+ if (irq < NR_INTC_IRQS) {
+ return intc_irq_describe(p, irq);
+ } else if (irq < NR_INTC_IRQS + 8) {
+ return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
+ } else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
+ return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
+ }
+
+ return 0;
+}
+#endif
+
+void init_cayman_irq(void)
+{
+ int i;
+
+ epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+ if (!epld_virt) {
+ printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
+ return;
+ }
+
+ for (i=0; i<NR_EXT_IRQS; i++) {
+ irq_desc[START_EXT_IRQS + i].handler = &cayman_irq_type;
+ }
+
+ /* Setup the SMSC interrupt */
+ setup_irq(SMSC_IRQ, &cayman_action_smsc);
+ setup_irq(PCI2_IRQ, &cayman_action_pci2);
+}
diff --git a/arch/sh64/mach-cayman/led.c b/arch/sh64/mach-cayman/led.c
new file mode 100644
index 000000000000..8b3cc4c78870
--- /dev/null
+++ b/arch/sh64/mach-cayman/led.c
@@ -0,0 +1,51 @@
+/*
+ * arch/sh64/kernel/led_cayman.c
+ *
+ * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Flash the LEDs
+ */
+#include <asm/io.h>
+
+/*
+** It is supposed these functions to be used for a low level
+** debugging (via Cayman LEDs), hence to be available as soon
+** as possible.
+** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped
+** (this happen when IRQ are initialized... quite late).
+** These triky dependencies should be removed. Temporary, it
+** may be enough to NOP until EPLD is mapped.
+*/
+
+extern unsigned long epld_virt;
+
+#define LED_ADDR (epld_virt + 0x008)
+#define HDSP2534_ADDR (epld_virt + 0x100)
+
+void mach_led(int position, int value)
+{
+ if (!epld_virt)
+ return;
+
+ if (value)
+ ctrl_outl(0, LED_ADDR);
+ else
+ ctrl_outl(1, LED_ADDR);
+
+}
+
+void mach_alphanum(int position, unsigned char value)
+{
+ if (!epld_virt)
+ return;
+
+ ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2));
+}
+
+void mach_alphanum_brightness(int setting)
+{
+ ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0);
+}
diff --git a/arch/sh64/mach-cayman/setup.c b/arch/sh64/mach-cayman/setup.c
new file mode 100644
index 000000000000..c793245629ad
--- /dev/null
+++ b/arch/sh64/mach-cayman/setup.c
@@ -0,0 +1,246 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mach-cayman/setup.c
+ *
+ * SH5 Cayman support
+ *
+ * This file handles the architecture-dependent parts of initialization
+ *
+ * Copyright David J. Mckay.
+ * Needs major work!
+ *
+ * benedict.gaster@superh.com: 3rd May 2002
+ * Added support for ramdisk, removing statically linked romfs at the same time.
+ *
+ * lethal@linux-sh.org: 15th May 2003
+ * Use the generic procfs cpuinfo interface, just return a valid board name.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define RES NO_PRIORITY /* Disabled */
+#define IR0 IRL0_PRIORITY /* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY /* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY /* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY /* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY /* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY /* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY /* WDT Ints */
+
+/* Setup for the SMSC FDC37C935 */
+#define SMSC_SUPERIO_BASE 0x04000000
+#define SMSC_CONFIG_PORT_ADDR 0x3f0
+#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR 0x3f1
+
+#define SMSC_ENTER_CONFIG_KEY 0x55
+#define SMSC_EXIT_CONFIG_KEY 0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX 0x07
+#define SMSC_DEVICE_ID_INDEX 0x20
+#define SMSC_DEVICE_REV_INDEX 0x21
+#define SMSC_ACTIVATE_INDEX 0x30
+#define SMSC_PRIMARY_BASE_INDEX 0x60
+#define SMSC_SECONDARY_BASE_INDEX 0x62
+#define SMSC_PRIMARY_INT_INDEX 0x70
+#define SMSC_SECONDARY_INT_INDEX 0x72
+
+#define SMSC_IDE1_DEVICE 1
+#define SMSC_KEYBOARD_DEVICE 7
+#define SMSC_CONFIG_REGISTERS 8
+
+#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
+ outb((index), SMSC_INDEX_PORT_ADDR); \
+ inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
+ outb((index), SMSC_INDEX_PORT_ADDR); \
+ outb((val), SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE 0x01f0
+#define IDE1_SECONDARY_BASE 0x03f6
+
+unsigned long smsc_superio_virt;
+
+/*
+ * Platform dependent structures: maps and parms block.
+ */
+struct resource io_resources[] = {
+ /* To be updated with external devices */
+};
+
+struct resource kram_resources[] = {
+ { "Kernel code", 0, 0 }, /* These must be last in the array */
+ { "Kernel data", 0, 0 } /* These must be last in the array */
+};
+
+struct resource xram_resources[] = {
+ /* To be updated with external devices */
+};
+
+struct resource rom_resources[] = {
+ /* To be updated with external devices */
+};
+
+struct sh64_platform platform_parms = {
+ .readonly_rootfs = 1,
+ .initial_root_dev = 0x0100,
+ .loader_type = 1,
+ .io_res_p = io_resources,
+ .io_res_count = ARRAY_SIZE(io_resources),
+ .kram_res_p = kram_resources,
+ .kram_res_count = ARRAY_SIZE(kram_resources),
+ .xram_res_p = xram_resources,
+ .xram_res_count = ARRAY_SIZE(xram_resources),
+ .rom_res_p = rom_resources,
+ .rom_res_count = ARRAY_SIZE(rom_resources),
+};
+
+int platform_int_priority[NR_INTC_IRQS] = {
+ IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
+ RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
+ PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
+ RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
+ TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
+ RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
+ RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
+ RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
+};
+
+static int __init smsc_superio_setup(void)
+{
+ unsigned char devid, devrev;
+
+ smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+ if (!smsc_superio_virt) {
+ panic("Unable to remap SMSC SuperIO\n");
+ }
+
+ /* Initially the chip is in run state */
+ /* Put it into configuration state */
+ outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+ outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+ /* Read device ID info */
+ devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+ devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+ printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
+
+ /* Select the keyboard device */
+ SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+
+ /* enable it */
+ SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+ /* Select the interrupts */
+ /* On a PC keyboard is IRQ1, mouse is IRQ12 */
+ SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
+ SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
+
+#ifdef CONFIG_IDE
+ /*
+ * Only IDE1 exists on the Cayman
+ */
+
+ /* Power it on */
+ SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
+
+ SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+ SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
+ SMSC_PRIMARY_BASE_INDEX + 0);
+ SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
+ SMSC_PRIMARY_BASE_INDEX + 1);
+
+ SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
+ SMSC_SECONDARY_BASE_INDEX + 0);
+ SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
+ SMSC_SECONDARY_BASE_INDEX + 1);
+
+ SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
+
+ SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
+ SMCS_LOGICAL_DEV_INDEX);
+
+ SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+ SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+ SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+ SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+#endif
+
+ /* Exit the configuraton state */
+ outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+ return 0;
+}
+
+/* This is grotty, but, because kernel is always referenced on the link line
+ * before any devices, this is safe.
+ */
+__initcall(smsc_superio_setup);
+
+void __init platform_setup(void)
+{
+ /* Cayman platform leaves the decision to head.S, for now */
+ platform_parms.fpu_flags = fpu_in_use;
+}
+
+void __init platform_monitor(void)
+{
+ /* Nothing yet .. */
+}
+
+void __init platform_reserve(void)
+{
+ /* Nothing yet .. */
+}
+
+const char *get_system_type(void)
+{
+ return "Hitachi Cayman";
+}
+
diff --git a/arch/sh64/mach-harp/Makefile b/arch/sh64/mach-harp/Makefile
new file mode 100644
index 000000000000..63f065bad2f9
--- /dev/null
+++ b/arch/sh64/mach-harp/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the ST50 Harp specific parts of the kernel
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+O_TARGET := harp.o
+
+obj-y := setup.o
+
+include $(TOPDIR)/Rules.make
+
diff --git a/arch/sh64/mach-harp/setup.c b/arch/sh64/mach-harp/setup.c
new file mode 100644
index 000000000000..3938a65c4b25
--- /dev/null
+++ b/arch/sh64/mach-harp/setup.c
@@ -0,0 +1,139 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mach-harp/setup.c
+ *
+ * SH-5 Simulator Platform Support
+ *
+ * This file handles the architecture-dependent parts of initialization
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ * benedict.gaster@superh.com: 3rd May 2002
+ * Added support for ramdisk, removing statically linked romfs at the same time. *
+ *
+ * lethal@linux-sh.org: 15th May 2003
+ * Use the generic procfs cpuinfo interface, just return a valid board name.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+
+#define RES_COUNT(res) ((sizeof((res))/sizeof(struct resource)))
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define RES NO_PRIORITY /* Disabled */
+#define IR0 IRL0_PRIORITY /* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY /* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY /* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY /* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY /* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY /* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY /* WDT Ints */
+
+/*
+ * Platform dependent structures: maps and parms block.
+ */
+struct resource io_resources[] = {
+ /* To be updated with external devices */
+};
+
+struct resource kram_resources[] = {
+ { "Kernel code", 0, 0 }, /* These must be last in the array */
+ { "Kernel data", 0, 0 } /* These must be last in the array */
+};
+
+struct resource xram_resources[] = {
+ /* To be updated with external devices */
+};
+
+struct resource rom_resources[] = {
+ /* To be updated with external devices */
+};
+
+struct sh64_platform platform_parms = {
+ .readonly_rootfs = 1,
+ .initial_root_dev = 0x0100,
+ .loader_type = 1,
+ .io_res_p = io_resources,
+ .io_res_count = RES_COUNT(io_resources),
+ .kram_res_p = kram_resources,
+ .kram_res_count = RES_COUNT(kram_resources),
+ .xram_res_p = xram_resources,
+ .xram_res_count = RES_COUNT(xram_resources),
+ .rom_res_p = rom_resources,
+ .rom_res_count = RES_COUNT(rom_resources),
+};
+
+int platform_int_priority[NR_INTC_IRQS] = {
+ IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
+ RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
+ PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
+ RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
+ TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
+ RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
+ RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
+ RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
+};
+
+void __init platform_setup(void)
+{
+ /* Harp platform leaves the decision to head.S, for now */
+ platform_parms.fpu_flags = fpu_in_use;
+}
+
+void __init platform_monitor(void)
+{
+ /* Nothing yet .. */
+}
+
+void __init platform_reserve(void)
+{
+ /* Nothing yet .. */
+}
+
+const char *get_system_type(void)
+{
+ return "ST50 Harp";
+}
+
diff --git a/arch/sh64/mach-romram/Makefile b/arch/sh64/mach-romram/Makefile
new file mode 100644
index 000000000000..02d05c05afa1
--- /dev/null
+++ b/arch/sh64/mach-romram/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the SH-5 ROM/RAM specific parts of the kernel
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+O_TARGET := romram.o
+
+obj-y := setup.o
+
+include $(TOPDIR)/Rules.make
+
diff --git a/arch/sh64/mach-romram/setup.c b/arch/sh64/mach-romram/setup.c
new file mode 100644
index 000000000000..a9ba03fc5bed
--- /dev/null
+++ b/arch/sh64/mach-romram/setup.c
@@ -0,0 +1,142 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mach-romram/setup.c
+ *
+ * SH-5 ROM/RAM Platform Support
+ *
+ * This file handles the architecture-dependent parts of initialization
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ * benedict.gaster@superh.com: 3rd May 2002
+ * Added support for ramdisk, removing statically linked romfs at the same time. *
+ *
+ * lethal@linux-sh.org: 15th May 2003
+ * Use the generic procfs cpuinfo interface, just return a valid board name.
+ *
+ * Sean.McGoogan@superh.com 17th Feb 2004
+ * copied from arch/sh64/mach-harp/setup.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+
+#define RES_COUNT(res) ((sizeof((res))/sizeof(struct resource)))
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define RES NO_PRIORITY /* Disabled */
+#define IR0 IRL0_PRIORITY /* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY /* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY /* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY /* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY /* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY /* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY /* WDT Ints */
+
+/*
+ * Platform dependent structures: maps and parms block.
+ */
+struct resource io_resources[] = {
+ /* To be updated with external devices */
+};
+
+struct resource kram_resources[] = {
+ { "Kernel code", 0, 0 }, /* These must be last in the array */
+ { "Kernel data", 0, 0 } /* These must be last in the array */
+};
+
+struct resource xram_resources[] = {
+ /* To be updated with external devices */
+};
+
+struct resource rom_resources[] = {
+ /* To be updated with external devices */
+};
+
+struct sh64_platform platform_parms = {
+ .readonly_rootfs = 1,
+ .initial_root_dev = 0x0100,
+ .loader_type = 1,
+ .io_res_p = io_resources,
+ .io_res_count = RES_COUNT(io_resources),
+ .kram_res_p = kram_resources,
+ .kram_res_count = RES_COUNT(kram_resources),
+ .xram_res_p = xram_resources,
+ .xram_res_count = RES_COUNT(xram_resources),
+ .rom_res_p = rom_resources,
+ .rom_res_count = RES_COUNT(rom_resources),
+};
+
+int platform_int_priority[NR_INTC_IRQS] = {
+ IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
+ RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
+ PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
+ RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
+ TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
+ RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
+ RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
+ RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
+};
+
+void __init platform_setup(void)
+{
+ /* ROM/RAM platform leaves the decision to head.S, for now */
+ platform_parms.fpu_flags = fpu_in_use;
+}
+
+void __init platform_monitor(void)
+{
+ /* Nothing yet .. */
+}
+
+void __init platform_reserve(void)
+{
+ /* Nothing yet .. */
+}
+
+const char *get_system_type(void)
+{
+ return "ROM/RAM";
+}
+
diff --git a/arch/sh64/mach-sim/Makefile b/arch/sh64/mach-sim/Makefile
new file mode 100644
index 000000000000..819c4078fdc6
--- /dev/null
+++ b/arch/sh64/mach-sim/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the SH-5 Simulator specific parts of the kernel
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+O_TARGET := sim.o
+
+obj-y := setup.o
+
+include $(TOPDIR)/Rules.make
+
diff --git a/arch/sh64/mach-sim/setup.c b/arch/sh64/mach-sim/setup.c
new file mode 100644
index 000000000000..a68639cb4e5a
--- /dev/null
+++ b/arch/sh64/mach-sim/setup.c
@@ -0,0 +1,164 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mach-sim/setup.c
+ *
+ * ST50 Simulator Platform Support
+ *
+ * This file handles the architecture-dependent parts of initialization
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ * lethal@linux-sh.org: 15th May 2003
+ * Use the generic procfs cpuinfo interface, just return a valid board name.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#include "../rootfs/rootfs.h"
+#endif
+
+static __init void platform_monitor(void);
+static __init void platform_setup(void);
+static __init void platform_reserve(void);
+
+
+#define PHYS_MEMORY CONFIG_MEMORY_SIZE_IN_MB*1024*1024
+
+#if (PHYS_MEMORY < P1SEG_FOOTPRINT_RAM)
+#error "Invalid kernel configuration. Physical memory below footprint requirements."
+#endif
+
+#define RAM_DISK_START CONFIG_MEMORY_START+P1SEG_INITRD_BLOCK /* Top of 4MB */
+#ifdef PLATFORM_ROMFS_SIZE
+#define RAM_DISK_SIZE (PAGE_ALIGN(PLATFORM_ROMFS_SIZE)) /* Variable Top */
+#if ((RAM_DISK_START + RAM_DISK_SIZE) > (CONFIG_MEMORY_START + PHYS_MEMORY))
+#error "Invalid kernel configuration. ROM RootFS exceeding physical memory."
+#endif
+#else
+#define RAM_DISK_SIZE P1SEG_INITRD_BLOCK_SIZE /* Top of 4MB */
+#endif
+
+#define RES_COUNT(res) ((sizeof((res))/sizeof(struct resource)))
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define RES NO_PRIORITY /* Disabled */
+#define IR0 IRL0_PRIORITY /* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY /* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY /* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY /* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY /* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY /* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY /* WDT Ints */
+
+/*
+ * Platform dependent structures: maps and parms block.
+ */
+struct resource io_resources[] = {
+ /* Nothing yet .. */
+};
+
+struct resource kram_resources[] = {
+ { "Kernel code", 0, 0 }, /* These must be last in the array */
+ { "Kernel data", 0, 0 } /* These must be last in the array */
+};
+
+struct resource xram_resources[] = {
+ /* Nothing yet .. */
+};
+
+struct resource rom_resources[] = {
+ /* Nothing yet .. */
+};
+
+struct sh64_platform platform_parms = {
+ .readonly_rootfs = 1,
+ .initial_root_dev = 0x0100,
+ .loader_type = 1,
+ .initrd_start = RAM_DISK_START,
+ .initrd_size = RAM_DISK_SIZE,
+ .io_res_p = io_resources,
+ .io_res_count = RES_COUNT(io_resources),
+ .kram_res_p = kram_resources,
+ .kram_res_count = RES_COUNT(kram_resources),
+ .xram_res_p = xram_resources,
+ .xram_res_count = RES_COUNT(xram_resources),
+ .rom_res_p = rom_resources,
+ .rom_res_count = RES_COUNT(rom_resources),
+};
+
+int platform_int_priority[NR_IRQS] = {
+ IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
+ RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
+ PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
+ RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
+ TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
+ RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
+ RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
+ RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
+};
+
+void __init platform_setup(void)
+{
+ /* Simulator platform leaves the decision to head.S */
+ platform_parms.fpu_flags = fpu_in_use;
+}
+
+void __init platform_monitor(void)
+{
+ /* Nothing yet .. */
+}
+
+void __init platform_reserve(void)
+{
+ /* Nothing yet .. */
+}
+
+const char *get_system_type(void)
+{
+ return "SH-5 Simulator";
+}
+
diff --git a/arch/sh64/mm/Makefile b/arch/sh64/mm/Makefile
new file mode 100644
index 000000000000..ff19378ac90a
--- /dev/null
+++ b/arch/sh64/mm/Makefile
@@ -0,0 +1,44 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2000, 2001 Paolo Alberelli
+# Copyright (C) 2003, 2004 Paul Mundt
+#
+# Makefile for the sh64-specific parts of the Linux memory manager.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y := init.o fault.o ioremap.o extable.o cache.o tlbmiss.o tlb.o
+
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+
+# Special flags for tlbmiss.o. This puts restrictions on the number of
+# caller-save registers that the compiler can target when building this file.
+# This is required because the code is called from a context in entry.S where
+# very few registers have been saved in the exception handler (for speed
+# reasons).
+# The caller save registers that have been saved and which can be used are
+# r2,r3,r4,r5 : argument passing
+# r15, r18 : SP and LINK
+# tr0-4 : allow all caller-save TR's. The compiler seems to be able to make
+# use of them, so it's probably beneficial to performance to save them
+# and have them available for it.
+#
+# The resources not listed below are callee save, i.e. the compiler is free to
+# use any of them and will spill them to the stack itself.
+
+CFLAGS_tlbmiss.o += -ffixed-r7 \
+ -ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
+ -ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
+ -ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
+ -ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
+ -ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
+ -ffixed-r41 -ffixed-r42 -ffixed-r43 \
+ -ffixed-r60 -ffixed-r61 -ffixed-r62 \
+ -fomit-frame-pointer
+
diff --git a/arch/sh64/mm/cache.c b/arch/sh64/mm/cache.c
new file mode 100644
index 000000000000..3b87e25ea773
--- /dev/null
+++ b/arch/sh64/mm/cache.c
@@ -0,0 +1,1041 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mm/cache.c
+ *
+ * Original version Copyright (C) 2000, 2001 Paolo Alberelli
+ * Second version Copyright (C) benedict.gaster@superh.com 2002
+ * Third version Copyright Richard.Curnow@superh.com 2003
+ * Hacks to third version Copyright (C) 2003 Paul Mundt
+ */
+
+/****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/tlb.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h> /* for flush_itlb_range */
+
+#include <linux/proc_fs.h>
+
+/* This function is in entry.S */
+extern unsigned long switch_and_save_asid(unsigned long new_asid);
+
+/* Wired TLB entry for the D-cache */
+static unsigned long long dtlb_cache_slot;
+
+/**
+ * sh64_cache_init()
+ *
+ * This is pretty much just a straightforward clone of the SH
+ * detect_cpu_and_cache_system().
+ *
+ * This function is responsible for setting up all of the cache
+ * info dynamically as well as taking care of CPU probing and
+ * setting up the relevant subtype data.
+ *
+ * FIXME: For the time being, we only really support the SH5-101
+ * out of the box, and don't support dynamic probing for things
+ * like the SH5-103 or even cut2 of the SH5-101. Implement this
+ * later!
+ */
+int __init sh64_cache_init(void)
+{
+ /*
+ * First, setup some sane values for the I-cache.
+ */
+ cpu_data->icache.ways = 4;
+ cpu_data->icache.sets = 256;
+ cpu_data->icache.linesz = L1_CACHE_BYTES;
+
+ /*
+ * FIXME: This can probably be cleaned up a bit as well.. for example,
+ * do we really need the way shift _and_ the way_step_shift ?? Judging
+ * by the existing code, I would guess no.. is there any valid reason
+ * why we need to be tracking this around?
+ */
+ cpu_data->icache.way_shift = 13;
+ cpu_data->icache.entry_shift = 5;
+ cpu_data->icache.set_shift = 4;
+ cpu_data->icache.way_step_shift = 16;
+ cpu_data->icache.asid_shift = 2;
+
+ /*
+ * way offset = cache size / associativity, so just don't factor in
+ * associativity in the first place..
+ */
+ cpu_data->icache.way_ofs = cpu_data->icache.sets *
+ cpu_data->icache.linesz;
+
+ cpu_data->icache.asid_mask = 0x3fc;
+ cpu_data->icache.idx_mask = 0x1fe0;
+ cpu_data->icache.epn_mask = 0xffffe000;
+ cpu_data->icache.flags = 0;
+
+ /*
+ * Next, setup some sane values for the D-cache.
+ *
+ * On the SH5, these are pretty consistent with the I-cache settings,
+ * so we just copy over the existing definitions.. these can be fixed
+ * up later, especially if we add runtime CPU probing.
+ *
+ * Though in the meantime it saves us from having to duplicate all of
+ * the above definitions..
+ */
+ cpu_data->dcache = cpu_data->icache;
+
+ /*
+ * Setup any cache-related flags here
+ */
+#if defined(CONFIG_DCACHE_WRITE_THROUGH)
+ set_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags));
+#elif defined(CONFIG_DCACHE_WRITE_BACK)
+ set_bit(SH_CACHE_MODE_WB, &(cpu_data->dcache.flags));
+#endif
+
+ /*
+ * We also need to reserve a slot for the D-cache in the DTLB, so we
+ * do this now ..
+ */
+ dtlb_cache_slot = sh64_get_wired_dtlb_entry();
+
+ return 0;
+}
+
+#ifdef CONFIG_DCACHE_DISABLED
+#define sh64_dcache_purge_all() do { } while (0)
+#define sh64_dcache_purge_coloured_phy_page(paddr, eaddr) do { } while (0)
+#define sh64_dcache_purge_user_range(mm, start, end) do { } while (0)
+#define sh64_dcache_purge_phy_page(paddr) do { } while (0)
+#define sh64_dcache_purge_virt_page(mm, eaddr) do { } while (0)
+#define sh64_dcache_purge_kernel_range(start, end) do { } while (0)
+#define sh64_dcache_wback_current_user_range(start, end) do { } while (0)
+#endif
+
+/*##########################################################################*/
+
+/* From here onwards, a rewrite of the implementation,
+ by Richard.Curnow@superh.com.
+
+ The major changes in this compared to the old version are;
+ 1. use more selective purging through OCBP instead of using ALLOCO to purge
+ by natural replacement. This avoids purging out unrelated cache lines
+ that happen to be in the same set.
+ 2. exploit the APIs copy_user_page and clear_user_page better
+ 3. be more selective about I-cache purging, in particular use invalidate_all
+ more sparingly.
+
+ */
+
+/*##########################################################################
+ SUPPORT FUNCTIONS
+ ##########################################################################*/
+
+/****************************************************************************/
+/* The following group of functions deal with mapping and unmapping a temporary
+ page into the DTLB slot that have been set aside for our exclusive use. */
+/* In order to accomplish this, we use the generic interface for adding and
+ removing a wired slot entry as defined in arch/sh64/mm/tlb.c */
+/****************************************************************************/
+
+static unsigned long slot_own_flags;
+
+static inline void sh64_setup_dtlb_cache_slot(unsigned long eaddr, unsigned long asid, unsigned long paddr)
+{
+ local_irq_save(slot_own_flags);
+ sh64_setup_tlb_slot(dtlb_cache_slot, eaddr, asid, paddr);
+}
+
+static inline void sh64_teardown_dtlb_cache_slot(void)
+{
+ sh64_teardown_tlb_slot(dtlb_cache_slot);
+ local_irq_restore(slot_own_flags);
+}
+
+/****************************************************************************/
+
+#ifndef CONFIG_ICACHE_DISABLED
+
+static void __inline__ sh64_icache_inv_all(void)
+{
+ unsigned long long addr, flag, data;
+ unsigned int flags;
+
+ addr=ICCR0;
+ flag=ICCR0_ICI;
+ data=0;
+
+ /* Make this a critical section for safety (probably not strictly necessary.) */
+ local_irq_save(flags);
+
+ /* Without %1 it gets unexplicably wrong */
+ asm volatile("getcfg %3, 0, %0\n\t"
+ "or %0, %2, %0\n\t"
+ "putcfg %3, 0, %0\n\t"
+ "synci"
+ : "=&r" (data)
+ : "0" (data), "r" (flag), "r" (addr));
+
+ local_irq_restore(flags);
+}
+
+static void sh64_icache_inv_kernel_range(unsigned long start, unsigned long end)
+{
+ /* Invalidate range of addresses [start,end] from the I-cache, where
+ * the addresses lie in the kernel superpage. */
+
+ unsigned long long ullend, addr, aligned_start;
+#if (NEFF == 32)
+ aligned_start = (unsigned long long)(signed long long)(signed long) start;
+#else
+#error "NEFF != 32"
+#endif
+ aligned_start &= L1_CACHE_ALIGN_MASK;
+ addr = aligned_start;
+#if (NEFF == 32)
+ ullend = (unsigned long long) (signed long long) (signed long) end;
+#else
+#error "NEFF != 32"
+#endif
+ while (addr <= ullend) {
+ asm __volatile__ ("icbi %0, 0" : : "r" (addr));
+ addr += L1_CACHE_BYTES;
+ }
+}
+
+static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long eaddr)
+{
+ /* If we get called, we know that vma->vm_flags contains VM_EXEC.
+ Also, eaddr is page-aligned. */
+
+ unsigned long long addr, end_addr;
+ unsigned long flags = 0;
+ unsigned long running_asid, vma_asid;
+ addr = eaddr;
+ end_addr = addr + PAGE_SIZE;
+
+ /* Check whether we can use the current ASID for the I-cache
+ invalidation. For example, if we're called via
+ access_process_vm->flush_cache_page->here, (e.g. when reading from
+ /proc), 'running_asid' will be that of the reader, not of the
+ victim.
+
+ Also, note the risk that we might get pre-empted between the ASID
+ compare and blocking IRQs, and before we regain control, the
+ pid->ASID mapping changes. However, the whole cache will get
+ invalidated when the mapping is renewed, so the worst that can
+ happen is that the loop below ends up invalidating somebody else's
+ cache entries.
+ */
+
+ running_asid = get_asid();
+ vma_asid = (vma->vm_mm->context & MMU_CONTEXT_ASID_MASK);
+ if (running_asid != vma_asid) {
+ local_irq_save(flags);
+ switch_and_save_asid(vma_asid);
+ }
+ while (addr < end_addr) {
+ /* Worth unrolling a little */
+ asm __volatile__("icbi %0, 0" : : "r" (addr));
+ asm __volatile__("icbi %0, 32" : : "r" (addr));
+ asm __volatile__("icbi %0, 64" : : "r" (addr));
+ asm __volatile__("icbi %0, 96" : : "r" (addr));
+ addr += 128;
+ }
+ if (running_asid != vma_asid) {
+ switch_and_save_asid(running_asid);
+ local_irq_restore(flags);
+ }
+}
+
+/****************************************************************************/
+
+static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ /* Used for invalidating big chunks of I-cache, i.e. assume the range
+ is whole pages. If 'start' or 'end' is not page aligned, the code
+ is conservative and invalidates to the ends of the enclosing pages.
+ This is functionally OK, just a performance loss. */
+
+ /* See the comments below in sh64_dcache_purge_user_range() regarding
+ the choice of algorithm. However, for the I-cache option (2) isn't
+ available because there are no physical tags so aliases can't be
+ resolved. The icbi instruction has to be used through the user
+ mapping. Because icbi is cheaper than ocbp on a cache hit, it
+ would be cheaper to use the selective code for a large range than is
+ possible with the D-cache. Just assume 64 for now as a working
+ figure.
+ */
+
+ int n_pages;
+
+ if (!mm) return;
+
+ n_pages = ((end - start) >> PAGE_SHIFT);
+ if (n_pages >= 64) {
+ sh64_icache_inv_all();
+ } else {
+ unsigned long aligned_start;
+ unsigned long eaddr;
+ unsigned long after_last_page_start;
+ unsigned long mm_asid, current_asid;
+ unsigned long long flags = 0ULL;
+
+ mm_asid = mm->context & MMU_CONTEXT_ASID_MASK;
+ current_asid = get_asid();
+
+ if (mm_asid != current_asid) {
+ /* Switch ASID and run the invalidate loop under cli */
+ local_irq_save(flags);
+ switch_and_save_asid(mm_asid);
+ }
+
+ aligned_start = start & PAGE_MASK;
+ after_last_page_start = PAGE_SIZE + ((end - 1) & PAGE_MASK);
+
+ while (aligned_start < after_last_page_start) {
+ struct vm_area_struct *vma;
+ unsigned long vma_end;
+ vma = find_vma(mm, aligned_start);
+ if (!vma || (aligned_start <= vma->vm_end)) {
+ /* Avoid getting stuck in an error condition */
+ aligned_start += PAGE_SIZE;
+ continue;
+ }
+ vma_end = vma->vm_end;
+ if (vma->vm_flags & VM_EXEC) {
+ /* Executable */
+ eaddr = aligned_start;
+ while (eaddr < vma_end) {
+ sh64_icache_inv_user_page(vma, eaddr);
+ eaddr += PAGE_SIZE;
+ }
+ }
+ aligned_start = vma->vm_end; /* Skip to start of next region */
+ }
+ if (mm_asid != current_asid) {
+ switch_and_save_asid(current_asid);
+ local_irq_restore(flags);
+ }
+ }
+}
+
+static void sh64_icache_inv_user_small_range(struct mm_struct *mm,
+ unsigned long start, int len)
+{
+
+ /* Invalidate a small range of user context I-cache, not necessarily
+ page (or even cache-line) aligned. */
+
+ unsigned long long eaddr = start;
+ unsigned long long eaddr_end = start + len;
+ unsigned long current_asid, mm_asid;
+ unsigned long long flags;
+ unsigned long long epage_start;
+
+ /* Since this is used inside ptrace, the ASID in the mm context
+ typically won't match current_asid. We'll have to switch ASID to do
+ this. For safety, and given that the range will be small, do all
+ this under cli.
+
+ Note, there is a hazard that the ASID in mm->context is no longer
+ actually associated with mm, i.e. if the mm->context has started a
+ new cycle since mm was last active. However, this is just a
+ performance issue: all that happens is that we invalidate lines
+ belonging to another mm, so the owning process has to refill them
+ when that mm goes live again. mm itself can't have any cache
+ entries because there will have been a flush_cache_all when the new
+ mm->context cycle started. */
+
+ /* Align to start of cache line. Otherwise, suppose len==8 and start
+ was at 32N+28 : the last 4 bytes wouldn't get invalidated. */
+ eaddr = start & L1_CACHE_ALIGN_MASK;
+ eaddr_end = start + len;
+
+ local_irq_save(flags);
+ mm_asid = mm->context & MMU_CONTEXT_ASID_MASK;
+ current_asid = switch_and_save_asid(mm_asid);
+
+ epage_start = eaddr & PAGE_MASK;
+
+ while (eaddr < eaddr_end)
+ {
+ asm __volatile__("icbi %0, 0" : : "r" (eaddr));
+ eaddr += L1_CACHE_BYTES;
+ }
+ switch_and_save_asid(current_asid);
+ local_irq_restore(flags);
+}
+
+static void sh64_icache_inv_current_user_range(unsigned long start, unsigned long end)
+{
+ /* The icbi instruction never raises ITLBMISS. i.e. if there's not a
+ cache hit on the virtual tag the instruction ends there, without a
+ TLB lookup. */
+
+ unsigned long long aligned_start;
+ unsigned long long ull_end;
+ unsigned long long addr;
+
+ ull_end = end;
+
+ /* Just invalidate over the range using the natural addresses. TLB
+ miss handling will be OK (TBC). Since it's for the current process,
+ either we're already in the right ASID context, or the ASIDs have
+ been recycled since we were last active in which case we might just
+ invalidate another processes I-cache entries : no worries, just a
+ performance drop for him. */
+ aligned_start = start & L1_CACHE_ALIGN_MASK;
+ addr = aligned_start;
+ while (addr < ull_end) {
+ asm __volatile__ ("icbi %0, 0" : : "r" (addr));
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ addr += L1_CACHE_BYTES;
+ }
+}
+
+#endif /* !CONFIG_ICACHE_DISABLED */
+
+/****************************************************************************/
+
+#ifndef CONFIG_DCACHE_DISABLED
+
+/* Buffer used as the target of alloco instructions to purge data from cache
+ sets by natural eviction. -- RPC */
+#define DUMMY_ALLOCO_AREA_SIZE L1_CACHE_SIZE_BYTES + (1024 * 4)
+static unsigned char dummy_alloco_area[DUMMY_ALLOCO_AREA_SIZE] __cacheline_aligned = { 0, };
+
+/****************************************************************************/
+
+static void __inline__ sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets)
+{
+ /* Purge all ways in a particular block of sets, specified by the base
+ set number and number of sets. Can handle wrap-around, if that's
+ needed. */
+
+ int dummy_buffer_base_set;
+ unsigned long long eaddr, eaddr0, eaddr1;
+ int j;
+ int set_offset;
+
+ dummy_buffer_base_set = ((int)&dummy_alloco_area & cpu_data->dcache.idx_mask) >> cpu_data->dcache.entry_shift;
+ set_offset = sets_to_purge_base - dummy_buffer_base_set;
+
+ for (j=0; j<n_sets; j++, set_offset++) {
+ set_offset &= (cpu_data->dcache.sets - 1);
+ eaddr0 = (unsigned long long)dummy_alloco_area + (set_offset << cpu_data->dcache.entry_shift);
+
+ /* Do one alloco which hits the required set per cache way. For
+ write-back mode, this will purge the #ways resident lines. There's
+ little point unrolling this loop because the allocos stall more if
+ they're too close together. */
+ eaddr1 = eaddr0 + cpu_data->dcache.way_ofs * cpu_data->dcache.ways;
+ for (eaddr=eaddr0; eaddr<eaddr1; eaddr+=cpu_data->dcache.way_ofs) {
+ asm __volatile__ ("alloco %0, 0" : : "r" (eaddr));
+ asm __volatile__ ("synco"); /* TAKum03020 */
+ }
+
+ eaddr1 = eaddr0 + cpu_data->dcache.way_ofs * cpu_data->dcache.ways;
+ for (eaddr=eaddr0; eaddr<eaddr1; eaddr+=cpu_data->dcache.way_ofs) {
+ /* Load from each address. Required because alloco is a NOP if
+ the cache is write-through. Write-through is a config option. */
+ if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags)))
+ *(volatile unsigned char *)(int)eaddr;
+ }
+ }
+
+ /* Don't use OCBI to invalidate the lines. That costs cycles directly.
+ If the dummy block is just left resident, it will naturally get
+ evicted as required. */
+
+ return;
+}
+
+/****************************************************************************/
+
+static void sh64_dcache_purge_all(void)
+{
+ /* Purge the entire contents of the dcache. The most efficient way to
+ achieve this is to use alloco instructions on a region of unused
+ memory equal in size to the cache, thereby causing the current
+ contents to be discarded by natural eviction. The alternative,
+ namely reading every tag, setting up a mapping for the corresponding
+ page and doing an OCBP for the line, would be much more expensive.
+ */
+
+ sh64_dcache_purge_sets(0, cpu_data->dcache.sets);
+
+ return;
+
+}
+
+/****************************************************************************/
+
+static void sh64_dcache_purge_kernel_range(unsigned long start, unsigned long end)
+{
+ /* Purge the range of addresses [start,end] from the D-cache. The
+ addresses lie in the superpage mapping. There's no harm if we
+ overpurge at either end - just a small performance loss. */
+ unsigned long long ullend, addr, aligned_start;
+#if (NEFF == 32)
+ aligned_start = (unsigned long long)(signed long long)(signed long) start;
+#else
+#error "NEFF != 32"
+#endif
+ aligned_start &= L1_CACHE_ALIGN_MASK;
+ addr = aligned_start;
+#if (NEFF == 32)
+ ullend = (unsigned long long) (signed long long) (signed long) end;
+#else
+#error "NEFF != 32"
+#endif
+ while (addr <= ullend) {
+ asm __volatile__ ("ocbp %0, 0" : : "r" (addr));
+ addr += L1_CACHE_BYTES;
+ }
+ return;
+}
+
+/* Assumes this address (+ (2**n_synbits) pages up from it) aren't used for
+ anything else in the kernel */
+#define MAGIC_PAGE0_START 0xffffffffec000000ULL
+
+static void sh64_dcache_purge_coloured_phy_page(unsigned long paddr, unsigned long eaddr)
+{
+ /* Purge the physical page 'paddr' from the cache. It's known that any
+ cache lines requiring attention have the same page colour as the the
+ address 'eaddr'.
+
+ This relies on the fact that the D-cache matches on physical tags
+ when no virtual tag matches. So we create an alias for the original
+ page and purge through that. (Alternatively, we could have done
+ this by switching ASID to match the original mapping and purged
+ through that, but that involves ASID switching cost + probably a
+ TLBMISS + refill anyway.)
+ */
+
+ unsigned long long magic_page_start;
+ unsigned long long magic_eaddr, magic_eaddr_end;
+
+ magic_page_start = MAGIC_PAGE0_START + (eaddr & CACHE_OC_SYN_MASK);
+
+ /* As long as the kernel is not pre-emptible, this doesn't need to be
+ under cli/sti. */
+
+ sh64_setup_dtlb_cache_slot(magic_page_start, get_asid(), paddr);
+
+ magic_eaddr = magic_page_start;
+ magic_eaddr_end = magic_eaddr + PAGE_SIZE;
+ while (magic_eaddr < magic_eaddr_end) {
+ /* Little point in unrolling this loop - the OCBPs are blocking
+ and won't go any quicker (i.e. the loop overhead is parallel
+ to part of the OCBP execution.) */
+ asm __volatile__ ("ocbp %0, 0" : : "r" (magic_eaddr));
+ magic_eaddr += L1_CACHE_BYTES;
+ }
+
+ sh64_teardown_dtlb_cache_slot();
+}
+
+/****************************************************************************/
+
+static void sh64_dcache_purge_phy_page(unsigned long paddr)
+{
+ /* Pure a page given its physical start address, by creating a
+ temporary 1 page mapping and purging across that. Even if we know
+ the virtual address (& vma or mm) of the page, the method here is
+ more elegant because it avoids issues of coping with page faults on
+ the purge instructions (i.e. no special-case code required in the
+ critical path in the TLB miss handling). */
+
+ unsigned long long eaddr_start, eaddr, eaddr_end;
+ int i;
+
+ /* As long as the kernel is not pre-emptible, this doesn't need to be
+ under cli/sti. */
+
+ eaddr_start = MAGIC_PAGE0_START;
+ for (i=0; i < (1 << CACHE_OC_N_SYNBITS); i++) {
+ sh64_setup_dtlb_cache_slot(eaddr_start, get_asid(), paddr);
+
+ eaddr = eaddr_start;
+ eaddr_end = eaddr + PAGE_SIZE;
+ while (eaddr < eaddr_end) {
+ asm __volatile__ ("ocbp %0, 0" : : "r" (eaddr));
+ eaddr += L1_CACHE_BYTES;
+ }
+
+ sh64_teardown_dtlb_cache_slot();
+ eaddr_start += PAGE_SIZE;
+ }
+}
+
+static void sh64_dcache_purge_user_page(struct mm_struct *mm, unsigned long eaddr)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ pte_t entry;
+ unsigned long paddr;
+
+ /* NOTE : all the callers of this have mm->page_table_lock held, so the
+ following page table traversal is safe even on SMP/pre-emptible. */
+
+ if (!mm) return; /* No way to find physical address of page */
+ pgd = pgd_offset(mm, eaddr);
+ if (pgd_bad(*pgd)) return;
+
+ pmd = pmd_offset(pgd, eaddr);
+ if (pmd_none(*pmd) || pmd_bad(*pmd)) return;
+
+ pte = pte_offset_kernel(pmd, eaddr);
+ entry = *pte;
+ if (pte_none(entry) || !pte_present(entry)) return;
+
+ paddr = pte_val(entry) & PAGE_MASK;
+
+ sh64_dcache_purge_coloured_phy_page(paddr, eaddr);
+
+}
+/****************************************************************************/
+
+static void sh64_dcache_purge_user_range(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ /* There are at least 5 choices for the implementation of this, with
+ pros (+), cons(-), comments(*):
+
+ 1. ocbp each line in the range through the original user's ASID
+ + no lines spuriously evicted
+ - tlbmiss handling (must either handle faults on demand => extra
+ special-case code in tlbmiss critical path), or map the page in
+ advance (=> flush_tlb_range in advance to avoid multiple hits)
+ - ASID switching
+ - expensive for large ranges
+
+ 2. temporarily map each page in the range to a special effective
+ address and ocbp through the temporary mapping; relies on the
+ fact that SH-5 OCB* always do TLB lookup and match on ptags (they
+ never look at the etags)
+ + no spurious evictions
+ - expensive for large ranges
+ * surely cheaper than (1)
+
+ 3. walk all the lines in the cache, check the tags, if a match
+ occurs create a page mapping to ocbp the line through
+ + no spurious evictions
+ - tag inspection overhead
+ - (especially for small ranges)
+ - potential cost of setting up/tearing down page mapping for
+ every line that matches the range
+ * cost partly independent of range size
+
+ 4. walk all the lines in the cache, check the tags, if a match
+ occurs use 4 * alloco to purge the line (+3 other probably
+ innocent victims) by natural eviction
+ + no tlb mapping overheads
+ - spurious evictions
+ - tag inspection overhead
+
+ 5. implement like flush_cache_all
+ + no tag inspection overhead
+ - spurious evictions
+ - bad for small ranges
+
+ (1) can be ruled out as more expensive than (2). (2) appears best
+ for small ranges. The choice between (3), (4) and (5) for large
+ ranges and the range size for the large/small boundary need
+ benchmarking to determine.
+
+ For now use approach (2) for small ranges and (5) for large ones.
+
+ */
+
+ int n_pages;
+
+ n_pages = ((end - start) >> PAGE_SHIFT);
+ if (n_pages >= 64) {
+#if 1
+ sh64_dcache_purge_all();
+#else
+ unsigned long long set, way;
+ unsigned long mm_asid = mm->context & MMU_CONTEXT_ASID_MASK;
+ for (set = 0; set < cpu_data->dcache.sets; set++) {
+ unsigned long long set_base_config_addr = CACHE_OC_ADDRESS_ARRAY + (set << cpu_data->dcache.set_shift);
+ for (way = 0; way < cpu_data->dcache.ways; way++) {
+ unsigned long long config_addr = set_base_config_addr + (way << cpu_data->dcache.way_step_shift);
+ unsigned long long tag0;
+ unsigned long line_valid;
+
+ asm __volatile__("getcfg %1, 0, %0" : "=r" (tag0) : "r" (config_addr));
+ line_valid = tag0 & SH_CACHE_VALID;
+ if (line_valid) {
+ unsigned long cache_asid;
+ unsigned long epn;
+
+ cache_asid = (tag0 & cpu_data->dcache.asid_mask) >> cpu_data->dcache.asid_shift;
+ /* The next line needs some
+ explanation. The virtual tags
+ encode bits [31:13] of the virtual
+ address, bit [12] of the 'tag' being
+ implied by the cache set index. */
+ epn = (tag0 & cpu_data->dcache.epn_mask) | ((set & 0x80) << cpu_data->dcache.entry_shift);
+
+ if ((cache_asid == mm_asid) && (start <= epn) && (epn < end)) {
+ /* TODO : could optimise this
+ call by batching multiple
+ adjacent sets together. */
+ sh64_dcache_purge_sets(set, 1);
+ break; /* Don't waste time inspecting other ways for this set */
+ }
+ }
+ }
+ }
+#endif
+ } else {
+ /* 'Small' range */
+ unsigned long aligned_start;
+ unsigned long eaddr;
+ unsigned long last_page_start;
+
+ aligned_start = start & PAGE_MASK;
+ /* 'end' is 1 byte beyond the end of the range */
+ last_page_start = (end - 1) & PAGE_MASK;
+
+ eaddr = aligned_start;
+ while (eaddr <= last_page_start) {
+ sh64_dcache_purge_user_page(mm, eaddr);
+ eaddr += PAGE_SIZE;
+ }
+ }
+ return;
+}
+
+static void sh64_dcache_wback_current_user_range(unsigned long start, unsigned long end)
+{
+ unsigned long long aligned_start;
+ unsigned long long ull_end;
+ unsigned long long addr;
+
+ ull_end = end;
+
+ /* Just wback over the range using the natural addresses. TLB miss
+ handling will be OK (TBC) : the range has just been written to by
+ the signal frame setup code, so the PTEs must exist.
+
+ Note, if we have CONFIG_PREEMPT and get preempted inside this loop,
+ it doesn't matter, even if the pid->ASID mapping changes whilst
+ we're away. In that case the cache will have been flushed when the
+ mapping was renewed. So the writebacks below will be nugatory (and
+ we'll doubtless have to fault the TLB entry/ies in again with the
+ new ASID), but it's a rare case.
+ */
+ aligned_start = start & L1_CACHE_ALIGN_MASK;
+ addr = aligned_start;
+ while (addr < ull_end) {
+ asm __volatile__ ("ocbwb %0, 0" : : "r" (addr));
+ addr += L1_CACHE_BYTES;
+ }
+}
+
+/****************************************************************************/
+
+/* These *MUST* lie in an area of virtual address space that's otherwise unused. */
+#define UNIQUE_EADDR_START 0xe0000000UL
+#define UNIQUE_EADDR_END 0xe8000000UL
+
+static unsigned long sh64_make_unique_eaddr(unsigned long user_eaddr, unsigned long paddr)
+{
+ /* Given a physical address paddr, and a user virtual address
+ user_eaddr which will eventually be mapped to it, create a one-off
+ kernel-private eaddr mapped to the same paddr. This is used for
+ creating special destination pages for copy_user_page and
+ clear_user_page */
+
+ static unsigned long current_pointer = UNIQUE_EADDR_START;
+ unsigned long coloured_pointer;
+
+ if (current_pointer == UNIQUE_EADDR_END) {
+ sh64_dcache_purge_all();
+ current_pointer = UNIQUE_EADDR_START;
+ }
+
+ coloured_pointer = (current_pointer & ~CACHE_OC_SYN_MASK) | (user_eaddr & CACHE_OC_SYN_MASK);
+ sh64_setup_dtlb_cache_slot(coloured_pointer, get_asid(), paddr);
+
+ current_pointer += (PAGE_SIZE << CACHE_OC_N_SYNBITS);
+
+ return coloured_pointer;
+}
+
+/****************************************************************************/
+
+static void sh64_copy_user_page_coloured(void *to, void *from, unsigned long address)
+{
+ void *coloured_to;
+
+ /* Discard any existing cache entries of the wrong colour. These are
+ present quite often, if the kernel has recently used the page
+ internally, then given it up, then it's been allocated to the user.
+ */
+ sh64_dcache_purge_coloured_phy_page(__pa(to), (unsigned long) to);
+
+ coloured_to = (void *) sh64_make_unique_eaddr(address, __pa(to));
+ sh64_page_copy(from, coloured_to);
+
+ sh64_teardown_dtlb_cache_slot();
+}
+
+static void sh64_clear_user_page_coloured(void *to, unsigned long address)
+{
+ void *coloured_to;
+
+ /* Discard any existing kernel-originated lines of the wrong colour (as
+ above) */
+ sh64_dcache_purge_coloured_phy_page(__pa(to), (unsigned long) to);
+
+ coloured_to = (void *) sh64_make_unique_eaddr(address, __pa(to));
+ sh64_page_clear(coloured_to);
+
+ sh64_teardown_dtlb_cache_slot();
+}
+
+#endif /* !CONFIG_DCACHE_DISABLED */
+
+/****************************************************************************/
+
+/*##########################################################################
+ EXTERNALLY CALLABLE API.
+ ##########################################################################*/
+
+/* These functions are described in Documentation/cachetlb.txt.
+ Each one of these functions varies in behaviour depending on whether the
+ I-cache and/or D-cache are configured out.
+
+ Note that the Linux term 'flush' corresponds to what is termed 'purge' in
+ the sh/sh64 jargon for the D-cache, i.e. write back dirty data then
+ invalidate the cache lines, and 'invalidate' for the I-cache.
+ */
+
+#undef FLUSH_TRACE
+
+void flush_cache_all(void)
+{
+ /* Invalidate the entire contents of both caches, after writing back to
+ memory any dirty data from the D-cache. */
+ sh64_dcache_purge_all();
+ sh64_icache_inv_all();
+}
+
+/****************************************************************************/
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+ /* Invalidate an entire user-address space from both caches, after
+ writing back dirty data (e.g. for shared mmap etc). */
+
+ /* This could be coded selectively by inspecting all the tags then
+ doing 4*alloco on any set containing a match (as for
+ flush_cache_range), but fork/exit/execve (where this is called from)
+ are expensive anyway. */
+
+ /* Have to do a purge here, despite the comments re I-cache below.
+ There could be odd-coloured dirty data associated with the mm still
+ in the cache - if this gets written out through natural eviction
+ after the kernel has reused the page there will be chaos.
+ */
+
+ sh64_dcache_purge_all();
+
+ /* The mm being torn down won't ever be active again, so any Icache
+ lines tagged with its ASID won't be visible for the rest of the
+ lifetime of this ASID cycle. Before the ASID gets reused, there
+ will be a flush_cache_all. Hence we don't need to touch the
+ I-cache. This is similar to the lack of action needed in
+ flush_tlb_mm - see fault.c. */
+}
+
+/****************************************************************************/
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ struct mm_struct *mm = vma->vm_mm;
+
+ /* Invalidate (from both caches) the range [start,end) of virtual
+ addresses from the user address space specified by mm, after writing
+ back any dirty data.
+
+ Note(1), 'end' is 1 byte beyond the end of the range to flush.
+
+ Note(2), this is called with mm->page_table_lock held.*/
+
+ sh64_dcache_purge_user_range(mm, start, end);
+ sh64_icache_inv_user_page_range(mm, start, end);
+}
+
+/****************************************************************************/
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long eaddr, unsigned long pfn)
+{
+ /* Invalidate any entries in either cache for the vma within the user
+ address space vma->vm_mm for the page starting at virtual address
+ 'eaddr'. This seems to be used primarily in breaking COW. Note,
+ the I-cache must be searched too in case the page in question is
+ both writable and being executed from (e.g. stack trampolines.)
+
+ Note(1), this is called with mm->page_table_lock held.
+ */
+
+ sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
+
+ if (vma->vm_flags & VM_EXEC) {
+ sh64_icache_inv_user_page(vma, eaddr);
+ }
+}
+
+/****************************************************************************/
+
+#ifndef CONFIG_DCACHE_DISABLED
+
+void copy_user_page(void *to, void *from, unsigned long address, struct page *page)
+{
+ /* 'from' and 'to' are kernel virtual addresses (within the superpage
+ mapping of the physical RAM). 'address' is the user virtual address
+ where the copy 'to' will be mapped after. This allows a custom
+ mapping to be used to ensure that the new copy is placed in the
+ right cache sets for the user to see it without having to bounce it
+ out via memory. Note however : the call to flush_page_to_ram in
+ (generic)/mm/memory.c:(break_cow) undoes all this good work in that one
+ very important case!
+
+ TBD : can we guarantee that on every call, any cache entries for
+ 'from' are in the same colour sets as 'address' also? i.e. is this
+ always used just to deal with COW? (I suspect not). */
+
+ /* There are two possibilities here for when the page 'from' was last accessed:
+ * by the kernel : this is OK, no purge required.
+ * by the/a user (e.g. for break_COW) : need to purge.
+
+ If the potential user mapping at 'address' is the same colour as
+ 'from' there is no need to purge any cache lines from the 'from'
+ page mapped into cache sets of colour 'address'. (The copy will be
+ accessing the page through 'from').
+ */
+
+ if (((address ^ (unsigned long) from) & CACHE_OC_SYN_MASK) != 0) {
+ sh64_dcache_purge_coloured_phy_page(__pa(from), address);
+ }
+
+ if (((address ^ (unsigned long) to) & CACHE_OC_SYN_MASK) == 0) {
+ /* No synonym problem on destination */
+ sh64_page_copy(from, to);
+ } else {
+ sh64_copy_user_page_coloured(to, from, address);
+ }
+
+ /* Note, don't need to flush 'from' page from the cache again - it's
+ done anyway by the generic code */
+}
+
+void clear_user_page(void *to, unsigned long address, struct page *page)
+{
+ /* 'to' is a kernel virtual address (within the superpage
+ mapping of the physical RAM). 'address' is the user virtual address
+ where the 'to' page will be mapped after. This allows a custom
+ mapping to be used to ensure that the new copy is placed in the
+ right cache sets for the user to see it without having to bounce it
+ out via memory.
+ */
+
+ if (((address ^ (unsigned long) to) & CACHE_OC_SYN_MASK) == 0) {
+ /* No synonym problem on destination */
+ sh64_page_clear(to);
+ } else {
+ sh64_clear_user_page_coloured(to, address);
+ }
+}
+
+#endif /* !CONFIG_DCACHE_DISABLED */
+
+/****************************************************************************/
+
+void flush_dcache_page(struct page *page)
+{
+ sh64_dcache_purge_phy_page(page_to_phys(page));
+ wmb();
+}
+
+/****************************************************************************/
+
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+ /* Flush the range [start,end] of kernel virtual adddress space from
+ the I-cache. The corresponding range must be purged from the
+ D-cache also because the SH-5 doesn't have cache snooping between
+ the caches. The addresses will be visible through the superpage
+ mapping, therefore it's guaranteed that there no cache entries for
+ the range in cache sets of the wrong colour.
+
+ Primarily used for cohering the I-cache after a module has
+ been loaded. */
+
+ /* We also make sure to purge the same range from the D-cache since
+ flush_page_to_ram() won't be doing this for us! */
+
+ sh64_dcache_purge_kernel_range(start, end);
+ wmb();
+ sh64_icache_inv_kernel_range(start, end);
+}
+
+/****************************************************************************/
+
+void flush_icache_user_range(struct vm_area_struct *vma,
+ struct page *page, unsigned long addr, int len)
+{
+ /* Flush the range of user (defined by vma->vm_mm) address space
+ starting at 'addr' for 'len' bytes from the cache. The range does
+ not straddle a page boundary, the unique physical page containing
+ the range is 'page'. This seems to be used mainly for invalidating
+ an address range following a poke into the program text through the
+ ptrace() call from another process (e.g. for BRK instruction
+ insertion). */
+
+ sh64_dcache_purge_coloured_phy_page(page_to_phys(page), addr);
+ mb();
+
+ if (vma->vm_flags & VM_EXEC) {
+ sh64_icache_inv_user_small_range(vma->vm_mm, addr, len);
+ }
+}
+
+/*##########################################################################
+ ARCH/SH64 PRIVATE CALLABLE API.
+ ##########################################################################*/
+
+void flush_cache_sigtramp(unsigned long start, unsigned long end)
+{
+ /* For the address range [start,end), write back the data from the
+ D-cache and invalidate the corresponding region of the I-cache for
+ the current process. Used to flush signal trampolines on the stack
+ to make them executable. */
+
+ sh64_dcache_wback_current_user_range(start, end);
+ wmb();
+ sh64_icache_inv_current_user_range(start, end);
+}
+
diff --git a/arch/sh64/mm/extable.c b/arch/sh64/mm/extable.c
new file mode 100644
index 000000000000..9da50e28b3fa
--- /dev/null
+++ b/arch/sh64/mm/extable.c
@@ -0,0 +1,81 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mm/extable.c
+ *
+ * Copyright (C) 2003 Richard Curnow
+ * Copyright (C) 2003, 2004 Paul Mundt
+ *
+ * Cloned from the 2.5 SH version..
+ */
+#include <linux/config.h>
+#include <linux/rwsem.h>
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+extern unsigned long copy_user_memcpy, copy_user_memcpy_end;
+extern void __copy_user_fixup(void);
+
+static const struct exception_table_entry __copy_user_fixup_ex = {
+ .fixup = (unsigned long)&__copy_user_fixup,
+};
+
+/* Some functions that may trap due to a bad user-mode address have too many loads
+ and stores in them to make it at all practical to label each one and put them all in
+ the main exception table.
+
+ In particular, the fast memcpy routine is like this. It's fix-up is just to fall back
+ to a slow byte-at-a-time copy, which is handled the conventional way. So it's functionally
+ OK to just handle any trap occurring in the fast memcpy with that fixup. */
+static const struct exception_table_entry *check_exception_ranges(unsigned long addr)
+{
+ if ((addr >= (unsigned long)&copy_user_memcpy) &&
+ (addr <= (unsigned long)&copy_user_memcpy_end))
+ return &__copy_user_fixup_ex;
+
+ return NULL;
+}
+
+/* Simple binary search */
+const struct exception_table_entry *
+search_extable(const struct exception_table_entry *first,
+ const struct exception_table_entry *last,
+ unsigned long value)
+{
+ const struct exception_table_entry *mid;
+
+ mid = check_exception_ranges(value);
+ if (mid)
+ return mid;
+
+ while (first <= last) {
+ long diff;
+
+ mid = (last - first) / 2 + first;
+ diff = mid->insn - value;
+ if (diff == 0)
+ return mid;
+ else if (diff < 0)
+ first = mid+1;
+ else
+ last = mid-1;
+ }
+
+ return NULL;
+}
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return 1;
+ }
+
+ return 0;
+}
+
diff --git a/arch/sh64/mm/fault.c b/arch/sh64/mm/fault.c
new file mode 100644
index 000000000000..a24932881dbb
--- /dev/null
+++ b/arch/sh64/mm/fault.c
@@ -0,0 +1,601 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mm/fault.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes)
+ * Copyright (C) 2003 Paul Mundt
+ *
+ */
+
+#include <linux/signal.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/tlb.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/registers.h> /* required by inline asm statements */
+
+#if defined(CONFIG_SH64_PROC_TLB)
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+/* Count numbers of tlb refills in each region */
+static unsigned long long calls_to_update_mmu_cache = 0ULL;
+static unsigned long long calls_to_flush_tlb_page = 0ULL;
+static unsigned long long calls_to_flush_tlb_range = 0ULL;
+static unsigned long long calls_to_flush_tlb_mm = 0ULL;
+static unsigned long long calls_to_flush_tlb_all = 0ULL;
+unsigned long long calls_to_do_slow_page_fault = 0ULL;
+unsigned long long calls_to_do_fast_page_fault = 0ULL;
+
+/* Count size of ranges for flush_tlb_range */
+static unsigned long long flush_tlb_range_1 = 0ULL;
+static unsigned long long flush_tlb_range_2 = 0ULL;
+static unsigned long long flush_tlb_range_3_4 = 0ULL;
+static unsigned long long flush_tlb_range_5_7 = 0ULL;
+static unsigned long long flush_tlb_range_8_11 = 0ULL;
+static unsigned long long flush_tlb_range_12_15 = 0ULL;
+static unsigned long long flush_tlb_range_16_up = 0ULL;
+
+static unsigned long long page_not_present = 0ULL;
+
+#endif
+
+extern void die(const char *,struct pt_regs *,long);
+
+#define PFLAG(val,flag) (( (val) & (flag) ) ? #flag : "" )
+#define PPROT(flag) PFLAG(pgprot_val(prot),flag)
+
+static inline void print_prots(pgprot_t prot)
+{
+ printk("prot is 0x%08lx\n",pgprot_val(prot));
+
+ printk("%s %s %s %s %s\n",PPROT(_PAGE_SHARED),PPROT(_PAGE_READ),
+ PPROT(_PAGE_EXECUTE),PPROT(_PAGE_WRITE),PPROT(_PAGE_USER));
+}
+
+static inline void print_vma(struct vm_area_struct *vma)
+{
+ printk("vma start 0x%08lx\n", vma->vm_start);
+ printk("vma end 0x%08lx\n", vma->vm_end);
+
+ print_prots(vma->vm_page_prot);
+ printk("vm_flags 0x%08lx\n", vma->vm_flags);
+}
+
+static inline void print_task(struct task_struct *tsk)
+{
+ printk("Task pid %d\n", tsk->pid);
+}
+
+static pte_t *lookup_pte(struct mm_struct *mm, unsigned long address)
+{
+ pgd_t *dir;
+ pmd_t *pmd;
+ pte_t *pte;
+ pte_t entry;
+
+ dir = pgd_offset(mm, address);
+ if (pgd_none(*dir)) {
+ return NULL;
+ }
+
+ pmd = pmd_offset(dir, address);
+ if (pmd_none(*pmd)) {
+ return NULL;
+ }
+
+ pte = pte_offset_kernel(pmd, address);
+ entry = *pte;
+
+ if (pte_none(entry)) {
+ return NULL;
+ }
+ if (!pte_present(entry)) {
+ return NULL;
+ }
+
+ return pte;
+}
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ */
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
+ unsigned long textaccess, unsigned long address)
+{
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ struct vm_area_struct * vma;
+ const struct exception_table_entry *fixup;
+ pte_t *pte;
+
+#if defined(CONFIG_SH64_PROC_TLB)
+ ++calls_to_do_slow_page_fault;
+#endif
+
+ /* SIM
+ * Note this is now called with interrupts still disabled
+ * This is to cope with being called for a missing IO port
+ * address with interupts disabled. This should be fixed as
+ * soon as we have a better 'fast path' miss handler.
+ *
+ * Plus take care how you try and debug this stuff.
+ * For example, writing debug data to a port which you
+ * have just faulted on is not going to work.
+ */
+
+ tsk = current;
+ mm = tsk->mm;
+
+ /* Not an IO address, so reenable interrupts */
+ local_irq_enable();
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+ if (in_interrupt() || !mm)
+ goto no_context;
+
+ /* TLB misses upon some cache flushes get done under cli() */
+ down_read(&mm->mmap_sem);
+
+ vma = find_vma(mm, address);
+
+ if (!vma) {
+#ifdef DEBUG_FAULT
+ print_task(tsk);
+ printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
+ __FUNCTION__,__LINE__,
+ address,regs->pc,textaccess,writeaccess);
+ show_regs(regs);
+#endif
+ goto bad_area;
+ }
+ if (vma->vm_start <= address) {
+ goto good_area;
+ }
+
+ if (!(vma->vm_flags & VM_GROWSDOWN)) {
+#ifdef DEBUG_FAULT
+ print_task(tsk);
+ printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
+ __FUNCTION__,__LINE__,
+ address,regs->pc,textaccess,writeaccess);
+ show_regs(regs);
+
+ print_vma(vma);
+#endif
+ goto bad_area;
+ }
+ if (expand_stack(vma, address)) {
+#ifdef DEBUG_FAULT
+ print_task(tsk);
+ printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
+ __FUNCTION__,__LINE__,
+ address,regs->pc,textaccess,writeaccess);
+ show_regs(regs);
+#endif
+ goto bad_area;
+ }
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+ if (textaccess) {
+ if (!(vma->vm_flags & VM_EXEC))
+ goto bad_area;
+ } else {
+ if (writeaccess) {
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ } else {
+ if (!(vma->vm_flags & VM_READ))
+ goto bad_area;
+ }
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+survive:
+ switch (handle_mm_fault(mm, vma, address, writeaccess)) {
+ case 1:
+ tsk->min_flt++;
+ break;
+ case 2:
+ tsk->maj_flt++;
+ break;
+ case 0:
+ goto do_sigbus;
+ default:
+ goto out_of_memory;
+ }
+ /* If we get here, the page fault has been handled. Do the TLB refill
+ now from the newly-setup PTE, to avoid having to fault again right
+ away on the same instruction. */
+ pte = lookup_pte (mm, address);
+ if (!pte) {
+ /* From empirical evidence, we can get here, due to
+ !pte_present(pte). (e.g. if a swap-in occurs, and the page
+ is swapped back out again before the process that wanted it
+ gets rescheduled?) */
+ goto no_pte;
+ }
+
+ __do_tlb_refill(address, textaccess, pte);
+
+no_pte:
+
+ up_read(&mm->mmap_sem);
+ return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+#ifdef DEBUG_FAULT
+ printk("fault:bad area\n");
+#endif
+ up_read(&mm->mmap_sem);
+
+ if (user_mode(regs)) {
+ static int count=0;
+ siginfo_t info;
+ if (count < 4) {
+ /* This is really to help debug faults when starting
+ * usermode, so only need a few */
+ count++;
+ printk("user mode bad_area address=%08lx pid=%d (%s) pc=%08lx\n",
+ address, current->pid, current->comm,
+ (unsigned long) regs->pc);
+#if 0
+ show_regs(regs);
+#endif
+ }
+ if (tsk->pid == 1) {
+ panic("INIT had user mode bad_area\n");
+ }
+ tsk->thread.address = address;
+ tsk->thread.error_code = writeaccess;
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ info.si_addr = (void *) address;
+ force_sig_info(SIGSEGV, &info, tsk);
+ return;
+ }
+
+no_context:
+#ifdef DEBUG_FAULT
+ printk("fault:No context\n");
+#endif
+ /* Are we prepared to handle this kernel fault? */
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ *
+ */
+ if (address < PAGE_SIZE)
+ printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
+ else
+ printk(KERN_ALERT "Unable to handle kernel paging request");
+ printk(" at virtual address %08lx\n", address);
+ printk(KERN_ALERT "pc = %08Lx%08Lx\n", regs->pc >> 32, regs->pc & 0xffffffff);
+ die("Oops", regs, writeaccess);
+ do_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ if (current->pid == 1) {
+ panic("INIT out of memory\n");
+ yield();
+ goto survive;
+ }
+ printk("fault:Out of memory\n");
+ up_read(&mm->mmap_sem);
+ if (current->pid == 1) {
+ yield();
+ down_read(&mm->mmap_sem);
+ goto survive;
+ }
+ printk("VM: killing process %s\n", tsk->comm);
+ if (user_mode(regs))
+ do_exit(SIGKILL);
+ goto no_context;
+
+do_sigbus:
+ printk("fault:Do sigbus\n");
+ up_read(&mm->mmap_sem);
+
+ /*
+ * Send a sigbus, regardless of whether we were in kernel
+ * or user mode.
+ */
+ tsk->thread.address = address;
+ tsk->thread.error_code = writeaccess;
+ tsk->thread.trap_no = 14;
+ force_sig(SIGBUS, tsk);
+
+ /* Kernel mode? Handle exceptions or die */
+ if (!user_mode(regs))
+ goto no_context;
+}
+
+
+void flush_tlb_all(void);
+
+void update_mmu_cache(struct vm_area_struct * vma,
+ unsigned long address, pte_t pte)
+{
+#if defined(CONFIG_SH64_PROC_TLB)
+ ++calls_to_update_mmu_cache;
+#endif
+
+ /*
+ * This appears to get called once for every pte entry that gets
+ * established => I don't think it's efficient to try refilling the
+ * TLBs with the pages - some may not get accessed even. Also, for
+ * executable pages, it is impossible to determine reliably here which
+ * TLB they should be mapped into (or both even).
+ *
+ * So, just do nothing here and handle faults on demand. In the
+ * TLBMISS handling case, the refill is now done anyway after the pte
+ * has been fixed up, so that deals with most useful cases.
+ */
+}
+
+static void __flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+ unsigned long long match, pteh=0, lpage;
+ unsigned long tlb;
+ struct mm_struct *mm;
+
+ mm = vma->vm_mm;
+
+ if (mm->context == NO_CONTEXT)
+ return;
+
+ /*
+ * Sign-extend based on neff.
+ */
+ lpage = (page & NEFF_SIGN) ? (page | NEFF_MASK) : page;
+ match = ((mm->context & MMU_CONTEXT_ASID_MASK) << PTEH_ASID_SHIFT) | PTEH_VALID;
+ match |= lpage;
+
+ /* Do ITLB : don't bother for pages in non-exectutable VMAs */
+ if (vma->vm_flags & VM_EXEC) {
+ for_each_itlb_entry(tlb) {
+ asm volatile ("getcfg %1, 0, %0"
+ : "=r" (pteh)
+ : "r" (tlb) );
+
+ if (pteh == match) {
+ __flush_tlb_slot(tlb);
+ break;
+ }
+
+ }
+ }
+
+ /* Do DTLB : any page could potentially be in here. */
+ for_each_dtlb_entry(tlb) {
+ asm volatile ("getcfg %1, 0, %0"
+ : "=r" (pteh)
+ : "r" (tlb) );
+
+ if (pteh == match) {
+ __flush_tlb_slot(tlb);
+ break;
+ }
+
+ }
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+ unsigned long flags;
+
+#if defined(CONFIG_SH64_PROC_TLB)
+ ++calls_to_flush_tlb_page;
+#endif
+
+ if (vma->vm_mm) {
+ page &= PAGE_MASK;
+ local_irq_save(flags);
+ __flush_tlb_page(vma, page);
+ local_irq_restore(flags);
+ }
+}
+
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ unsigned long flags;
+ unsigned long long match, pteh=0, pteh_epn, pteh_low;
+ unsigned long tlb;
+ struct mm_struct *mm;
+
+ mm = vma->vm_mm;
+
+#if defined(CONFIG_SH64_PROC_TLB)
+ ++calls_to_flush_tlb_range;
+
+ {
+ unsigned long size = (end - 1) - start;
+ size >>= 12; /* divide by PAGE_SIZE */
+ size++; /* end=start+4096 => 1 page */
+ switch (size) {
+ case 1 : flush_tlb_range_1++; break;
+ case 2 : flush_tlb_range_2++; break;
+ case 3 ... 4 : flush_tlb_range_3_4++; break;
+ case 5 ... 7 : flush_tlb_range_5_7++; break;
+ case 8 ... 11 : flush_tlb_range_8_11++; break;
+ case 12 ... 15 : flush_tlb_range_12_15++; break;
+ default : flush_tlb_range_16_up++; break;
+ }
+ }
+#endif
+
+ if (mm->context == NO_CONTEXT)
+ return;
+
+ local_irq_save(flags);
+
+ start &= PAGE_MASK;
+ end &= PAGE_MASK;
+
+ match = ((mm->context & MMU_CONTEXT_ASID_MASK) << PTEH_ASID_SHIFT) | PTEH_VALID;
+
+ /* Flush ITLB */
+ for_each_itlb_entry(tlb) {
+ asm volatile ("getcfg %1, 0, %0"
+ : "=r" (pteh)
+ : "r" (tlb) );
+
+ pteh_epn = pteh & PAGE_MASK;
+ pteh_low = pteh & ~PAGE_MASK;
+
+ if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
+ __flush_tlb_slot(tlb);
+ }
+
+ /* Flush DTLB */
+ for_each_dtlb_entry(tlb) {
+ asm volatile ("getcfg %1, 0, %0"
+ : "=r" (pteh)
+ : "r" (tlb) );
+
+ pteh_epn = pteh & PAGE_MASK;
+ pteh_low = pteh & ~PAGE_MASK;
+
+ if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
+ __flush_tlb_slot(tlb);
+ }
+
+ local_irq_restore(flags);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ unsigned long flags;
+
+#if defined(CONFIG_SH64_PROC_TLB)
+ ++calls_to_flush_tlb_mm;
+#endif
+
+ if (mm->context == NO_CONTEXT)
+ return;
+
+ local_irq_save(flags);
+
+ mm->context=NO_CONTEXT;
+ if(mm==current->mm)
+ activate_context(mm);
+
+ local_irq_restore(flags);
+
+}
+
+void flush_tlb_all(void)
+{
+ /* Invalidate all, including shared pages, excluding fixed TLBs */
+
+ unsigned long flags, tlb;
+
+#if defined(CONFIG_SH64_PROC_TLB)
+ ++calls_to_flush_tlb_all;
+#endif
+
+ local_irq_save(flags);
+
+ /* Flush each ITLB entry */
+ for_each_itlb_entry(tlb) {
+ __flush_tlb_slot(tlb);
+ }
+
+ /* Flush each DTLB entry */
+ for_each_dtlb_entry(tlb) {
+ __flush_tlb_slot(tlb);
+ }
+
+ local_irq_restore(flags);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ /* FIXME: Optimize this later.. */
+ flush_tlb_all();
+}
+
+#if defined(CONFIG_SH64_PROC_TLB)
+/* Procfs interface to read the performance information */
+
+static int
+tlb_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void *data)
+{
+ int len=0;
+ len += sprintf(buf+len, "do_fast_page_fault called %12lld times\n", calls_to_do_fast_page_fault);
+ len += sprintf(buf+len, "do_slow_page_fault called %12lld times\n", calls_to_do_slow_page_fault);
+ len += sprintf(buf+len, "update_mmu_cache called %12lld times\n", calls_to_update_mmu_cache);
+ len += sprintf(buf+len, "flush_tlb_page called %12lld times\n", calls_to_flush_tlb_page);
+ len += sprintf(buf+len, "flush_tlb_range called %12lld times\n", calls_to_flush_tlb_range);
+ len += sprintf(buf+len, "flush_tlb_mm called %12lld times\n", calls_to_flush_tlb_mm);
+ len += sprintf(buf+len, "flush_tlb_all called %12lld times\n", calls_to_flush_tlb_all);
+ len += sprintf(buf+len, "flush_tlb_range_sizes\n"
+ " 1 : %12lld\n"
+ " 2 : %12lld\n"
+ " 3 - 4 : %12lld\n"
+ " 5 - 7 : %12lld\n"
+ " 8 - 11 : %12lld\n"
+ "12 - 15 : %12lld\n"
+ "16+ : %12lld\n",
+ flush_tlb_range_1, flush_tlb_range_2, flush_tlb_range_3_4,
+ flush_tlb_range_5_7, flush_tlb_range_8_11, flush_tlb_range_12_15,
+ flush_tlb_range_16_up);
+ len += sprintf(buf+len, "page not present %12lld times\n", page_not_present);
+ *eof = 1;
+ return len;
+}
+
+static int __init register_proc_tlb(void)
+{
+ create_proc_read_entry("tlb", 0, NULL, tlb_proc_info, NULL);
+ return 0;
+}
+
+__initcall(register_proc_tlb);
+
+#endif
diff --git a/arch/sh64/mm/hugetlbpage.c b/arch/sh64/mm/hugetlbpage.c
new file mode 100644
index 000000000000..bcad2aefa4ee
--- /dev/null
+++ b/arch/sh64/mm/hugetlbpage.c
@@ -0,0 +1,264 @@
+/*
+ * arch/sh64/mm/hugetlbpage.c
+ *
+ * SuperH HugeTLB page support.
+ *
+ * Cloned from sparc64 by Paul Mundt.
+ *
+ * Copyright (C) 2002, 2003 David S. Miller (davem@redhat.com)
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/pagemap.h>
+#include <linux/smp_lock.h>
+#include <linux/slab.h>
+#include <linux/sysctl.h>
+
+#include <asm/mman.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+
+static pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte = NULL;
+
+ pgd = pgd_offset(mm, addr);
+ if (pgd) {
+ pmd = pmd_alloc(mm, pgd, addr);
+ if (pmd)
+ pte = pte_alloc_map(mm, pmd, addr);
+ }
+ return pte;
+}
+
+static pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte = NULL;
+
+ pgd = pgd_offset(mm, addr);
+ if (pgd) {
+ pmd = pmd_offset(pgd, addr);
+ if (pmd)
+ pte = pte_offset_map(pmd, addr);
+ }
+ return pte;
+}
+
+#define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0)
+
+static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma,
+ struct page *page, pte_t * page_table, int write_access)
+{
+ unsigned long i;
+ pte_t entry;
+
+ add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE);
+
+ if (write_access)
+ entry = pte_mkwrite(pte_mkdirty(mk_pte(page,
+ vma->vm_page_prot)));
+ else
+ entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot));
+ entry = pte_mkyoung(entry);
+ mk_pte_huge(entry);
+
+ for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
+ set_pte(page_table, entry);
+ page_table++;
+
+ pte_val(entry) += PAGE_SIZE;
+ }
+}
+
+/*
+ * This function checks for proper alignment of input addr and len parameters.
+ */
+int is_aligned_hugepage_range(unsigned long addr, unsigned long len)
+{
+ if (len & ~HPAGE_MASK)
+ return -EINVAL;
+ if (addr & ~HPAGE_MASK)
+ return -EINVAL;
+ return 0;
+}
+
+int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src,
+ struct vm_area_struct *vma)
+{
+ pte_t *src_pte, *dst_pte, entry;
+ struct page *ptepage;
+ unsigned long addr = vma->vm_start;
+ unsigned long end = vma->vm_end;
+ int i;
+
+ while (addr < end) {
+ dst_pte = huge_pte_alloc(dst, addr);
+ if (!dst_pte)
+ goto nomem;
+ src_pte = huge_pte_offset(src, addr);
+ BUG_ON(!src_pte || pte_none(*src_pte));
+ entry = *src_pte;
+ ptepage = pte_page(entry);
+ get_page(ptepage);
+ for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
+ set_pte(dst_pte, entry);
+ pte_val(entry) += PAGE_SIZE;
+ dst_pte++;
+ }
+ add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE);
+ addr += HPAGE_SIZE;
+ }
+ return 0;
+
+nomem:
+ return -ENOMEM;
+}
+
+int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
+ struct page **pages, struct vm_area_struct **vmas,
+ unsigned long *position, int *length, int i)
+{
+ unsigned long vaddr = *position;
+ int remainder = *length;
+
+ WARN_ON(!is_vm_hugetlb_page(vma));
+
+ while (vaddr < vma->vm_end && remainder) {
+ if (pages) {
+ pte_t *pte;
+ struct page *page;
+
+ pte = huge_pte_offset(mm, vaddr);
+
+ /* hugetlb should be locked, and hence, prefaulted */
+ BUG_ON(!pte || pte_none(*pte));
+
+ page = pte_page(*pte);
+
+ WARN_ON(!PageCompound(page));
+
+ get_page(page);
+ pages[i] = page;
+ }
+
+ if (vmas)
+ vmas[i] = vma;
+
+ vaddr += PAGE_SIZE;
+ --remainder;
+ ++i;
+ }
+
+ *length = remainder;
+ *position = vaddr;
+
+ return i;
+}
+
+struct page *follow_huge_addr(struct mm_struct *mm,
+ unsigned long address, int write)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+int pmd_huge(pmd_t pmd)
+{
+ return 0;
+}
+
+struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+ pmd_t *pmd, int write)
+{
+ return NULL;
+}
+
+void unmap_hugepage_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ unsigned long address;
+ pte_t *pte;
+ struct page *page;
+ int i;
+
+ BUG_ON(start & (HPAGE_SIZE - 1));
+ BUG_ON(end & (HPAGE_SIZE - 1));
+
+ for (address = start; address < end; address += HPAGE_SIZE) {
+ pte = huge_pte_offset(mm, address);
+ BUG_ON(!pte);
+ if (pte_none(*pte))
+ continue;
+ page = pte_page(*pte);
+ put_page(page);
+ for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
+ pte_clear(mm, address+(i*PAGE_SIZE), pte);
+ pte++;
+ }
+ }
+ add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT));
+ flush_tlb_range(vma, start, end);
+}
+
+int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long addr;
+ int ret = 0;
+
+ BUG_ON(vma->vm_start & ~HPAGE_MASK);
+ BUG_ON(vma->vm_end & ~HPAGE_MASK);
+
+ spin_lock(&mm->page_table_lock);
+ for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) {
+ unsigned long idx;
+ pte_t *pte = huge_pte_alloc(mm, addr);
+ struct page *page;
+
+ if (!pte) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ if (!pte_none(*pte))
+ continue;
+
+ idx = ((addr - vma->vm_start) >> HPAGE_SHIFT)
+ + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
+ page = find_get_page(mapping, idx);
+ if (!page) {
+ /* charge the fs quota first */
+ if (hugetlb_get_quota(mapping)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ page = alloc_huge_page();
+ if (!page) {
+ hugetlb_put_quota(mapping);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC);
+ if (! ret) {
+ unlock_page(page);
+ } else {
+ hugetlb_put_quota(mapping);
+ free_huge_page(page);
+ goto out;
+ }
+ }
+ set_huge_pte(mm, vma, page, pte, vma->vm_flags & VM_WRITE);
+ }
+out:
+ spin_unlock(&mm->page_table_lock);
+ return ret;
+}
diff --git a/arch/sh64/mm/init.c b/arch/sh64/mm/init.c
new file mode 100644
index 000000000000..a65e8bb2c3cc
--- /dev/null
+++ b/arch/sh64/mm/init.c
@@ -0,0 +1,196 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mm/init.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003, 2004 Paul Mundt
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/rwsem.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/bootmem.h>
+
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/tlb.h>
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#include <linux/blk.h>
+#endif
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/*
+ * Cache of MMU context last used.
+ */
+unsigned long mmu_context_cache;
+pgd_t * mmu_pdtp_cache;
+int after_bootmem = 0;
+
+/*
+ * BAD_PAGE is the page that is used for page faults when linux
+ * is out-of-memory. Older versions of linux just did a
+ * do_exit(), but using this instead means there is less risk
+ * for a process dying in kernel mode, possibly leaving an inode
+ * unused etc..
+ *
+ * BAD_PAGETABLE is the accompanying page-table: it is initialized
+ * to point to BAD_PAGE entries.
+ *
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+
+extern unsigned char empty_zero_page[PAGE_SIZE];
+extern unsigned char empty_bad_page[PAGE_SIZE];
+extern pte_t empty_bad_pte_table[PTRS_PER_PTE];
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+extern char _text, _etext, _edata, __bss_start, _end;
+extern char __init_begin, __init_end;
+
+/* It'd be good if these lines were in the standard header file. */
+#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
+#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
+
+
+void show_mem(void)
+{
+ int i, total = 0, reserved = 0;
+ int shared = 0, cached = 0;
+
+ printk("Mem-info:\n");
+ show_free_areas();
+ printk("Free swap: %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
+ i = max_mapnr;
+ while (i-- > 0) {
+ total++;
+ if (PageReserved(mem_map+i))
+ reserved++;
+ else if (PageSwapCache(mem_map+i))
+ cached++;
+ else if (page_count(mem_map+i))
+ shared += page_count(mem_map+i) - 1;
+ }
+ printk("%d pages of RAM\n",total);
+ printk("%d reserved pages\n",reserved);
+ printk("%d pages shared\n",shared);
+ printk("%d pages swap cached\n",cached);
+ printk("%ld pages in page table cache\n",pgtable_cache_size);
+}
+
+/*
+ * paging_init() sets up the page tables.
+ *
+ * head.S already did a lot to set up address translation for the kernel.
+ * Here we comes with:
+ * . MMU enabled
+ * . ASID set (SR)
+ * . some 512MB regions being mapped of which the most relevant here is:
+ * . CACHED segment (ASID 0 [irrelevant], shared AND NOT user)
+ * . possible variable length regions being mapped as:
+ * . UNCACHED segment (ASID 0 [irrelevant], shared AND NOT user)
+ * . All of the memory regions are placed, independently from the platform
+ * on high addresses, above 0x80000000.
+ * . swapper_pg_dir is already cleared out by the .space directive
+ * in any case swapper does not require a real page directory since
+ * it's all kernel contained.
+ *
+ * Those pesky NULL-reference errors in the kernel are then
+ * dealt with by not mapping address 0x00000000 at all.
+ *
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+
+ pgd_init((unsigned long)swapper_pg_dir);
+ pgd_init((unsigned long)swapper_pg_dir +
+ sizeof(pgd_t) * USER_PTRS_PER_PGD);
+
+ mmu_context_cache = MMU_CONTEXT_FIRST_VERSION;
+
+ /*
+ * All memory is good as ZONE_NORMAL (fall-through) and ZONE_DMA.
+ */
+ zones_size[ZONE_DMA] = MAX_LOW_PFN - START_PFN;
+ NODE_DATA(0)->node_mem_map = NULL;
+ free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0);
+}
+
+void __init mem_init(void)
+{
+ int codesize, reservedpages, datasize, initsize;
+ int tmp;
+
+ max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
+ high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE);
+
+ /*
+ * Clear the zero-page.
+ * This is not required but we might want to re-use
+ * this very page to pass boot parameters, one day.
+ */
+ memset(empty_zero_page, 0, PAGE_SIZE);
+
+ /* this will put all low memory onto the freelists */
+ totalram_pages += free_all_bootmem_node(NODE_DATA(0));
+ reservedpages = 0;
+ for (tmp = 0; tmp < num_physpages; tmp++)
+ /*
+ * Only count reserved RAM pages
+ */
+ if (PageReserved(mem_map+tmp))
+ reservedpages++;
+
+ after_bootmem = 1;
+
+ codesize = (unsigned long) &_etext - (unsigned long) &_text;
+ datasize = (unsigned long) &_edata - (unsigned long) &_etext;
+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+ printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+ max_mapnr << (PAGE_SHIFT-10),
+ codesize >> 10,
+ reservedpages << (PAGE_SHIFT-10),
+ datasize >> 10,
+ initsize >> 10);
+}
+
+void free_initmem(void)
+{
+ unsigned long addr;
+
+ addr = (unsigned long)(&__init_begin);
+ for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ set_page_count(virt_to_page(addr), 1);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk ("Freeing unused kernel memory: %ldk freed\n", (&__init_end - &__init_begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ unsigned long p;
+ for (p = start; p < end; p += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(p));
+ set_page_count(virt_to_page(p), 1);
+ free_page(p);
+ totalram_pages++;
+ }
+ printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+}
+#endif
+
diff --git a/arch/sh64/mm/ioremap.c b/arch/sh64/mm/ioremap.c
new file mode 100644
index 000000000000..f4003da556bc
--- /dev/null
+++ b/arch/sh64/mm/ioremap.c
@@ -0,0 +1,469 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mm/ioremap.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003, 2004 Paul Mundt
+ *
+ * Mostly derived from arch/sh/mm/ioremap.c which, in turn is mostly
+ * derived from arch/i386/mm/ioremap.c .
+ *
+ * (C) Copyright 1995 1996 Linus Torvalds
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <linux/ioport.h>
+#include <linux/bootmem.h>
+#include <linux/proc_fs.h>
+
+static void shmedia_mapioaddr(unsigned long, unsigned long);
+static unsigned long shmedia_ioremap(struct resource *, u32, int);
+
+static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
+ unsigned long phys_addr, unsigned long flags)
+{
+ unsigned long end;
+ unsigned long pfn;
+ pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_READ |
+ _PAGE_WRITE | _PAGE_DIRTY |
+ _PAGE_ACCESSED | _PAGE_SHARED | flags);
+
+ address &= ~PMD_MASK;
+ end = address + size;
+ if (end > PMD_SIZE)
+ end = PMD_SIZE;
+ if (address >= end)
+ BUG();
+
+ pfn = phys_addr >> PAGE_SHIFT;
+
+ pr_debug(" %s: pte %p address %lx size %lx phys_addr %lx\n",
+ __FUNCTION__,pte,address,size,phys_addr);
+
+ do {
+ if (!pte_none(*pte)) {
+ printk("remap_area_pte: page already exists\n");
+ BUG();
+ }
+
+ set_pte(pte, pfn_pte(pfn, pgprot));
+ address += PAGE_SIZE;
+ pfn++;
+ pte++;
+ } while (address && (address < end));
+}
+
+static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
+ unsigned long phys_addr, unsigned long flags)
+{
+ unsigned long end;
+
+ address &= ~PGDIR_MASK;
+ end = address + size;
+
+ if (end > PGDIR_SIZE)
+ end = PGDIR_SIZE;
+
+ phys_addr -= address;
+
+ if (address >= end)
+ BUG();
+
+ do {
+ pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ if (!pte)
+ return -ENOMEM;
+ remap_area_pte(pte, address, end - address, address + phys_addr, flags);
+ address = (address + PMD_SIZE) & PMD_MASK;
+ pmd++;
+ } while (address && (address < end));
+ return 0;
+}
+
+static int remap_area_pages(unsigned long address, unsigned long phys_addr,
+ unsigned long size, unsigned long flags)
+{
+ int error;
+ pgd_t * dir;
+ unsigned long end = address + size;
+
+ phys_addr -= address;
+ dir = pgd_offset_k(address);
+ flush_cache_all();
+ if (address >= end)
+ BUG();
+ spin_lock(&init_mm.page_table_lock);
+ do {
+ pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
+ error = -ENOMEM;
+ if (!pmd)
+ break;
+ if (remap_area_pmd(pmd, address, end - address,
+ phys_addr + address, flags)) {
+ break;
+ }
+ error = 0;
+ address = (address + PGDIR_SIZE) & PGDIR_MASK;
+ dir++;
+ } while (address && (address < end));
+ spin_unlock(&init_mm.page_table_lock);
+ flush_tlb_all();
+ return 0;
+}
+
+/*
+ * Generic mapping function (not visible outside):
+ */
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
+{
+ void * addr;
+ struct vm_struct * area;
+ unsigned long offset, last_addr;
+
+ /* Don't allow wraparound or zero size */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /*
+ * Mappings have to be page-aligned
+ */
+ offset = phys_addr & ~PAGE_MASK;
+ phys_addr &= PAGE_MASK;
+ size = PAGE_ALIGN(last_addr + 1) - phys_addr;
+
+ /*
+ * Ok, go for it..
+ */
+ area = get_vm_area(size, VM_IOREMAP);
+ pr_debug("Get vm_area returns %p addr %p\n",area,area->addr);
+ if (!area)
+ return NULL;
+ area->phys_addr = phys_addr;
+ addr = area->addr;
+ if (remap_area_pages((unsigned long)addr, phys_addr, size, flags)) {
+ vunmap(addr);
+ return NULL;
+ }
+ return (void *) (offset + (char *)addr);
+}
+
+void iounmap(void *addr)
+{
+ struct vm_struct *area;
+
+ vfree((void *) (PAGE_MASK & (unsigned long) addr));
+ area = remove_vm_area((void *) (PAGE_MASK & (unsigned long) addr));
+ if (!area) {
+ printk(KERN_ERR "iounmap: bad address %p\n", addr);
+ return;
+ }
+
+ kfree(area);
+}
+
+static struct resource shmedia_iomap = {
+ .name = "shmedia_iomap",
+ .start = IOBASE_VADDR + PAGE_SIZE,
+ .end = IOBASE_END - 1,
+};
+
+static void shmedia_mapioaddr(unsigned long pa, unsigned long va);
+static void shmedia_unmapioaddr(unsigned long vaddr);
+static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz);
+
+/*
+ * We have the same problem as the SPARC, so lets have the same comment:
+ * Our mini-allocator...
+ * Boy this is gross! We need it because we must map I/O for
+ * timers and interrupt controller before the kmalloc is available.
+ */
+
+#define XNMLN 15
+#define XNRES 10
+
+struct xresource {
+ struct resource xres; /* Must be first */
+ int xflag; /* 1 == used */
+ char xname[XNMLN+1];
+};
+
+static struct xresource xresv[XNRES];
+
+static struct xresource *xres_alloc(void)
+{
+ struct xresource *xrp;
+ int n;
+
+ xrp = xresv;
+ for (n = 0; n < XNRES; n++) {
+ if (xrp->xflag == 0) {
+ xrp->xflag = 1;
+ return xrp;
+ }
+ xrp++;
+ }
+ return NULL;
+}
+
+static void xres_free(struct xresource *xrp)
+{
+ xrp->xflag = 0;
+}
+
+static struct resource *shmedia_find_resource(struct resource *root,
+ unsigned long vaddr)
+{
+ struct resource *res;
+
+ for (res = root->child; res; res = res->sibling)
+ if (res->start <= vaddr && res->end >= vaddr)
+ return res;
+
+ return NULL;
+}
+
+static unsigned long shmedia_alloc_io(unsigned long phys, unsigned long size,
+ const char *name)
+{
+ static int printed_full = 0;
+ struct xresource *xres;
+ struct resource *res;
+ char *tack;
+ int tlen;
+
+ if (name == NULL) name = "???";
+
+ if ((xres = xres_alloc()) != 0) {
+ tack = xres->xname;
+ res = &xres->xres;
+ } else {
+ if (!printed_full) {
+ printk("%s: done with statics, switching to kmalloc\n",
+ __FUNCTION__);
+ printed_full = 1;
+ }
+ tlen = strlen(name);
+ tack = kmalloc(sizeof (struct resource) + tlen + 1, GFP_KERNEL);
+ if (!tack)
+ return -ENOMEM;
+ memset(tack, 0, sizeof(struct resource));
+ res = (struct resource *) tack;
+ tack += sizeof (struct resource);
+ }
+
+ strncpy(tack, name, XNMLN);
+ tack[XNMLN] = 0;
+ res->name = tack;
+
+ return shmedia_ioremap(res, phys, size);
+}
+
+static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz)
+{
+ unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK);
+ unsigned long round_sz = (offset + sz + PAGE_SIZE-1) & PAGE_MASK;
+ unsigned long va;
+ unsigned int psz;
+
+ if (allocate_resource(&shmedia_iomap, res, round_sz,
+ shmedia_iomap.start, shmedia_iomap.end,
+ PAGE_SIZE, NULL, NULL) != 0) {
+ panic("alloc_io_res(%s): cannot occupy\n",
+ (res->name != NULL)? res->name: "???");
+ }
+
+ va = res->start;
+ pa &= PAGE_MASK;
+
+ psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
+
+ /* log at boot time ... */
+ printk("mapioaddr: %6s [%2d page%s] va 0x%08lx pa 0x%08x\n",
+ ((res->name != NULL) ? res->name : "???"),
+ psz, psz == 1 ? " " : "s", va, pa);
+
+ for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) {
+ shmedia_mapioaddr(pa, va);
+ va += PAGE_SIZE;
+ pa += PAGE_SIZE;
+ }
+
+ res->start += offset;
+ res->end = res->start + sz - 1; /* not strictly necessary.. */
+
+ return res->start;
+}
+
+static void shmedia_free_io(struct resource *res)
+{
+ unsigned long len = res->end - res->start + 1;
+
+ BUG_ON((len & (PAGE_SIZE - 1)) != 0);
+
+ while (len) {
+ len -= PAGE_SIZE;
+ shmedia_unmapioaddr(res->start + len);
+ }
+
+ release_resource(res);
+}
+
+static void *sh64_get_page(void)
+{
+ extern int after_bootmem;
+ void *page;
+
+ if (after_bootmem) {
+ page = (void *)get_zeroed_page(GFP_ATOMIC);
+ } else {
+ page = alloc_bootmem_pages(PAGE_SIZE);
+ }
+
+ if (!page || ((unsigned long)page & ~PAGE_MASK))
+ panic("sh64_get_page: Out of memory already?\n");
+
+ return page;
+}
+
+static void shmedia_mapioaddr(unsigned long pa, unsigned long va)
+{
+ pgd_t *pgdp;
+ pmd_t *pmdp;
+ pte_t *ptep, pte;
+ pgprot_t prot;
+ unsigned long flags = 1; /* 1 = CB0-1 device */
+
+ pr_debug("shmedia_mapiopage pa %08lx va %08lx\n", pa, va);
+
+ pgdp = pgd_offset_k(va);
+ if (pgd_none(*pgdp) || !pgd_present(*pgdp)) {
+ pmdp = (pmd_t *)sh64_get_page();
+ set_pgd(pgdp, __pgd((unsigned long)pmdp | _KERNPG_TABLE));
+ }
+
+ pmdp = pmd_offset(pgdp, va);
+ if (pmd_none(*pmdp) || !pmd_present(*pmdp) ) {
+ ptep = (pte_t *)sh64_get_page();
+ set_pmd(pmdp, __pmd((unsigned long)ptep + _PAGE_TABLE));
+ }
+
+ prot = __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE |
+ _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_SHARED | flags);
+
+ pte = pfn_pte(pa >> PAGE_SHIFT, prot);
+ ptep = pte_offset_kernel(pmdp, va);
+
+ if (!pte_none(*ptep) &&
+ pte_val(*ptep) != pte_val(pte))
+ pte_ERROR(*ptep);
+
+ set_pte(ptep, pte);
+
+ flush_tlb_kernel_range(va, PAGE_SIZE);
+}
+
+static void shmedia_unmapioaddr(unsigned long vaddr)
+{
+ pgd_t *pgdp;
+ pmd_t *pmdp;
+ pte_t *ptep;
+
+ pgdp = pgd_offset_k(vaddr);
+ pmdp = pmd_offset(pgdp, vaddr);
+
+ if (pmd_none(*pmdp) || pmd_bad(*pmdp))
+ return;
+
+ ptep = pte_offset_kernel(pmdp, vaddr);
+
+ if (pte_none(*ptep) || !pte_present(*ptep))
+ return;
+
+ clear_page((void *)ptep);
+ pte_clear(&init_mm, vaddr, ptep);
+}
+
+unsigned long onchip_remap(unsigned long phys, unsigned long size, const char *name)
+{
+ if (size < PAGE_SIZE)
+ size = PAGE_SIZE;
+
+ return shmedia_alloc_io(phys, size, name);
+}
+
+void onchip_unmap(unsigned long vaddr)
+{
+ struct resource *res;
+ unsigned int psz;
+
+ res = shmedia_find_resource(&shmedia_iomap, vaddr);
+ if (!res) {
+ printk(KERN_ERR "%s: Failed to free 0x%08lx\n",
+ __FUNCTION__, vaddr);
+ return;
+ }
+
+ psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
+
+ printk(KERN_DEBUG "unmapioaddr: %6s [%2d page%s] freed\n",
+ res->name, psz, psz == 1 ? " " : "s");
+
+ shmedia_free_io(res);
+
+ if ((char *)res >= (char *)xresv &&
+ (char *)res < (char *)&xresv[XNRES]) {
+ xres_free((struct xresource *)res);
+ } else {
+ kfree(res);
+ }
+}
+
+#ifdef CONFIG_PROC_FS
+static int
+ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof,
+ void *data)
+{
+ char *p = buf, *e = buf + length;
+ struct resource *r;
+ const char *nm;
+
+ for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) {
+ if (p + 32 >= e) /* Better than nothing */
+ break;
+ if ((nm = r->name) == 0) nm = "???";
+ p += sprintf(p, "%08lx-%08lx: %s\n", r->start, r->end, nm);
+ }
+
+ return p-buf;
+}
+#endif /* CONFIG_PROC_FS */
+
+static int __init register_proc_onchip(void)
+{
+#ifdef CONFIG_PROC_FS
+ create_proc_read_entry("io_map",0,0, ioremap_proc_info, &shmedia_iomap);
+#endif
+ return 0;
+}
+
+__initcall(register_proc_onchip);
diff --git a/arch/sh64/mm/tlb.c b/arch/sh64/mm/tlb.c
new file mode 100644
index 000000000000..d517e7d70340
--- /dev/null
+++ b/arch/sh64/mm/tlb.c
@@ -0,0 +1,166 @@
+/*
+ * arch/sh64/mm/tlb.c
+ *
+ * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
+ * Copyright (C) 2003 Richard Curnow <richard.curnow@superh.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+
+/**
+ * sh64_tlb_init
+ *
+ * Perform initial setup for the DTLB and ITLB.
+ */
+int __init sh64_tlb_init(void)
+{
+ /* Assign some sane DTLB defaults */
+ cpu_data->dtlb.entries = 64;
+ cpu_data->dtlb.step = 0x10;
+
+ cpu_data->dtlb.first = DTLB_FIXED | cpu_data->dtlb.step;
+ cpu_data->dtlb.next = cpu_data->dtlb.first;
+
+ cpu_data->dtlb.last = DTLB_FIXED |
+ ((cpu_data->dtlb.entries - 1) *
+ cpu_data->dtlb.step);
+
+ /* And again for the ITLB */
+ cpu_data->itlb.entries = 64;
+ cpu_data->itlb.step = 0x10;
+
+ cpu_data->itlb.first = ITLB_FIXED | cpu_data->itlb.step;
+ cpu_data->itlb.next = cpu_data->itlb.first;
+ cpu_data->itlb.last = ITLB_FIXED |
+ ((cpu_data->itlb.entries - 1) *
+ cpu_data->itlb.step);
+
+ return 0;
+}
+
+/**
+ * sh64_next_free_dtlb_entry
+ *
+ * Find the next available DTLB entry
+ */
+unsigned long long sh64_next_free_dtlb_entry(void)
+{
+ return cpu_data->dtlb.next;
+}
+
+/**
+ * sh64_get_wired_dtlb_entry
+ *
+ * Allocate a wired (locked-in) entry in the DTLB
+ */
+unsigned long long sh64_get_wired_dtlb_entry(void)
+{
+ unsigned long long entry = sh64_next_free_dtlb_entry();
+
+ cpu_data->dtlb.first += cpu_data->dtlb.step;
+ cpu_data->dtlb.next += cpu_data->dtlb.step;
+
+ return entry;
+}
+
+/**
+ * sh64_put_wired_dtlb_entry
+ *
+ * @entry: Address of TLB slot.
+ *
+ * Free a wired (locked-in) entry in the DTLB.
+ *
+ * Works like a stack, last one to allocate must be first one to free.
+ */
+int sh64_put_wired_dtlb_entry(unsigned long long entry)
+{
+ __flush_tlb_slot(entry);
+
+ /*
+ * We don't do any particularly useful tracking of wired entries,
+ * so this approach works like a stack .. last one to be allocated
+ * has to be the first one to be freed.
+ *
+ * We could potentially load wired entries into a list and work on
+ * rebalancing the list periodically (which also entails moving the
+ * contents of a TLB entry) .. though I have a feeling that this is
+ * more trouble than it's worth.
+ */
+
+ /*
+ * Entry must be valid .. we don't want any ITLB addresses!
+ */
+ if (entry <= DTLB_FIXED)
+ return -EINVAL;
+
+ /*
+ * Next, check if we're within range to be freed. (ie, must be the
+ * entry beneath the first 'free' entry!
+ */
+ if (entry < (cpu_data->dtlb.first - cpu_data->dtlb.step))
+ return -EINVAL;
+
+ /* If we are, then bring this entry back into the list */
+ cpu_data->dtlb.first -= cpu_data->dtlb.step;
+ cpu_data->dtlb.next = entry;
+
+ return 0;
+}
+
+/**
+ * sh64_setup_tlb_slot
+ *
+ * @config_addr: Address of TLB slot.
+ * @eaddr: Virtual address.
+ * @asid: Address Space Identifier.
+ * @paddr: Physical address.
+ *
+ * Load up a virtual<->physical translation for @eaddr<->@paddr in the
+ * pre-allocated TLB slot @config_addr (see sh64_get_wired_dtlb_entry).
+ */
+inline void sh64_setup_tlb_slot(unsigned long long config_addr,
+ unsigned long eaddr,
+ unsigned long asid,
+ unsigned long paddr)
+{
+ unsigned long long pteh, ptel;
+
+ /* Sign extension */
+#if (NEFF == 32)
+ pteh = (unsigned long long)(signed long long)(signed long) eaddr;
+#else
+#error "Can't sign extend more than 32 bits yet"
+#endif
+ pteh &= PAGE_MASK;
+ pteh |= (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
+#if (NEFF == 32)
+ ptel = (unsigned long long)(signed long long)(signed long) paddr;
+#else
+#error "Can't sign extend more than 32 bits yet"
+#endif
+ ptel &= PAGE_MASK;
+ ptel |= (_PAGE_CACHABLE | _PAGE_READ | _PAGE_WRITE);
+
+ asm volatile("putcfg %0, 1, %1\n\t"
+ "putcfg %0, 0, %2\n"
+ : : "r" (config_addr), "r" (ptel), "r" (pteh));
+}
+
+/**
+ * sh64_teardown_tlb_slot
+ *
+ * @config_addr: Address of TLB slot.
+ *
+ * Teardown any existing mapping in the TLB slot @config_addr.
+ */
+inline void sh64_teardown_tlb_slot(unsigned long long config_addr)
+ __attribute__ ((alias("__flush_tlb_slot")));
+
diff --git a/arch/sh64/mm/tlbmiss.c b/arch/sh64/mm/tlbmiss.c
new file mode 100644
index 000000000000..c8615954aaa9
--- /dev/null
+++ b/arch/sh64/mm/tlbmiss.c
@@ -0,0 +1,280 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/mm/tlbmiss.c
+ *
+ * Original code from fault.c
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ * Fast PTE->TLB refill path
+ * Copyright (C) 2003 Richard.Curnow@superh.com
+ *
+ * IMPORTANT NOTES :
+ * The do_fast_page_fault function is called from a context in entry.S where very few registers
+ * have been saved. In particular, the code in this file must be compiled not to use ANY
+ * caller-save regiseters that are not part of the restricted save set. Also, it means that
+ * code in this file must not make calls to functions elsewhere in the kernel, or else the
+ * excepting context will see corruption in its caller-save registers. Plus, the entry.S save
+ * area is non-reentrant, so this code has to run with SR.BL==1, i.e. no interrupts taken inside
+ * it and panic on any exception.
+ *
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/tlb.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/registers.h> /* required by inline asm statements */
+
+/* Callable from fault.c, so not static */
+inline void __do_tlb_refill(unsigned long address,
+ unsigned long long is_text_not_data, pte_t *pte)
+{
+ unsigned long long ptel;
+ unsigned long long pteh=0;
+ struct tlb_info *tlbp;
+ unsigned long long next;
+
+ /* Get PTEL first */
+ ptel = pte_val(*pte);
+
+ /*
+ * Set PTEH register
+ */
+ pteh = address & MMU_VPN_MASK;
+
+ /* Sign extend based on neff. */
+#if (NEFF == 32)
+ /* Faster sign extension */
+ pteh = (unsigned long long)(signed long long)(signed long)pteh;
+#else
+ /* General case */
+ pteh = (pteh & NEFF_SIGN) ? (pteh | NEFF_MASK) : pteh;
+#endif
+
+ /* Set the ASID. */
+ pteh |= get_asid() << PTEH_ASID_SHIFT;
+ pteh |= PTEH_VALID;
+
+ /* Set PTEL register, set_pte has performed the sign extension */
+ ptel &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
+
+ tlbp = is_text_not_data ? &(cpu_data->itlb) : &(cpu_data->dtlb);
+ next = tlbp->next;
+ __flush_tlb_slot(next);
+ asm volatile ("putcfg %0,1,%2\n\n\t"
+ "putcfg %0,0,%1\n"
+ : : "r" (next), "r" (pteh), "r" (ptel) );
+
+ next += TLB_STEP;
+ if (next > tlbp->last) next = tlbp->first;
+ tlbp->next = next;
+
+}
+
+static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long protection_flags,
+ unsigned long long textaccess,
+ unsigned long address)
+{
+ pgd_t *dir;
+ pmd_t *pmd;
+ static pte_t *pte;
+ pte_t entry;
+
+ dir = pgd_offset_k(address);
+ pmd = pmd_offset(dir, address);
+
+ if (pmd_none(*pmd)) {
+ return 0;
+ }
+
+ if (pmd_bad(*pmd)) {
+ pmd_clear(pmd);
+ return 0;
+ }
+
+ pte = pte_offset_kernel(pmd, address);
+ entry = *pte;
+
+ if (pte_none(entry) || !pte_present(entry)) {
+ return 0;
+ }
+
+ if ((pte_val(entry) & protection_flags) != protection_flags) {
+ return 0;
+ }
+
+ __do_tlb_refill(address, textaccess, pte);
+
+ return 1;
+}
+
+static int handle_tlbmiss(struct mm_struct *mm, unsigned long long protection_flags,
+ unsigned long long textaccess,
+ unsigned long address)
+{
+ pgd_t *dir;
+ pmd_t *pmd;
+ pte_t *pte;
+ pte_t entry;
+
+ /* NB. The PGD currently only contains a single entry - there is no
+ page table tree stored for the top half of the address space since
+ virtual pages in that region should never be mapped in user mode.
+ (In kernel mode, the only things in that region are the 512Mb super
+ page (locked in), and vmalloc (modules) + I/O device pages (handled
+ by handle_vmalloc_fault), so no PGD for the upper half is required
+ by kernel mode either).
+
+ See how mm->pgd is allocated and initialised in pgd_alloc to see why
+ the next test is necessary. - RPC */
+ if (address >= (unsigned long) TASK_SIZE) {
+ /* upper half - never has page table entries. */
+ return 0;
+ }
+ dir = pgd_offset(mm, address);
+ if (pgd_none(*dir)) {
+ return 0;
+ }
+ if (!pgd_present(*dir)) {
+ return 0;
+ }
+
+ pmd = pmd_offset(dir, address);
+ if (pmd_none(*pmd)) {
+ return 0;
+ }
+ if (!pmd_present(*pmd)) {
+ return 0;
+ }
+ pte = pte_offset_kernel(pmd, address);
+ entry = *pte;
+ if (pte_none(entry)) {
+ return 0;
+ }
+ if (!pte_present(entry)) {
+ return 0;
+ }
+
+ /* If the page doesn't have sufficient protection bits set to service the
+ kind of fault being handled, there's not much point doing the TLB refill.
+ Punt the fault to the general handler. */
+ if ((pte_val(entry) & protection_flags) != protection_flags) {
+ return 0;
+ }
+
+ __do_tlb_refill(address, textaccess, pte);
+
+ return 1;
+}
+
+/* Put all this information into one structure so that everything is just arithmetic
+ relative to a single base address. This reduces the number of movi/shori pairs needed
+ just to load addresses of static data. */
+struct expevt_lookup {
+ unsigned short protection_flags[8];
+ unsigned char is_text_access[8];
+ unsigned char is_write_access[8];
+};
+
+#define PRU (1<<9)
+#define PRW (1<<8)
+#define PRX (1<<7)
+#define PRR (1<<6)
+
+#define DIRTY (_PAGE_DIRTY | _PAGE_ACCESSED)
+#define YOUNG (_PAGE_ACCESSED)
+
+/* Sized as 8 rather than 4 to allow checking the PTE's PRU bit against whether
+ the fault happened in user mode or privileged mode. */
+static struct expevt_lookup expevt_lookup_table = {
+ .protection_flags = {PRX, PRX, 0, 0, PRR, PRR, PRW, PRW},
+ .is_text_access = {1, 1, 0, 0, 0, 0, 0, 0}
+};
+
+/*
+ This routine handles page faults that can be serviced just by refilling a
+ TLB entry from an existing page table entry. (This case represents a very
+ large majority of page faults.) Return 1 if the fault was successfully
+ handled. Return 0 if the fault could not be handled. (This leads into the
+ general fault handling in fault.c which deals with mapping file-backed
+ pages, stack growth, segmentation faults, swapping etc etc)
+ */
+asmlinkage int do_fast_page_fault(unsigned long long ssr_md, unsigned long long expevt,
+ unsigned long address)
+{
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ unsigned long long textaccess;
+ unsigned long long protection_flags;
+ unsigned long long index;
+ unsigned long long expevt4;
+
+ /* The next few lines implement a way of hashing EXPEVT into a small array index
+ which can be used to lookup parameters specific to the type of TLBMISS being
+ handled. Note:
+ ITLBMISS has EXPEVT==0xa40
+ RTLBMISS has EXPEVT==0x040
+ WTLBMISS has EXPEVT==0x060
+ */
+
+ expevt4 = (expevt >> 4);
+ /* TODO : xor ssr_md into this expression too. Then we can check that PRU is set
+ when it needs to be. */
+ index = expevt4 ^ (expevt4 >> 5);
+ index &= 7;
+ protection_flags = expevt_lookup_table.protection_flags[index];
+ textaccess = expevt_lookup_table.is_text_access[index];
+
+#ifdef CONFIG_SH64_PROC_TLB
+ ++calls_to_do_fast_page_fault;
+#endif
+
+ /* SIM
+ * Note this is now called with interrupts still disabled
+ * This is to cope with being called for a missing IO port
+ * address with interupts disabled. This should be fixed as
+ * soon as we have a better 'fast path' miss handler.
+ *
+ * Plus take care how you try and debug this stuff.
+ * For example, writing debug data to a port which you
+ * have just faulted on is not going to work.
+ */
+
+ tsk = current;
+ mm = tsk->mm;
+
+ if ((address >= VMALLOC_START && address < VMALLOC_END) ||
+ (address >= IOBASE_VADDR && address < IOBASE_END)) {
+ if (ssr_md) {
+ /* Process-contexts can never have this address range mapped */
+ if (handle_vmalloc_fault(mm, protection_flags, textaccess, address)) {
+ return 1;
+ }
+ }
+ } else if (!in_interrupt() && mm) {
+ if (handle_tlbmiss(mm, protection_flags, textaccess, address)) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
diff --git a/arch/sh64/oprofile/Kconfig b/arch/sh64/oprofile/Kconfig
new file mode 100644
index 000000000000..19d37730b664
--- /dev/null
+++ b/arch/sh64/oprofile/Kconfig
@@ -0,0 +1,23 @@
+
+menu "Profiling support"
+ depends on EXPERIMENTAL
+
+config PROFILING
+ bool "Profiling support (EXPERIMENTAL)"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+
+config OPROFILE
+ tristate "OProfile system profiling (EXPERIMENTAL)"
+ depends on PROFILING
+ help
+ OProfile is a profiling system capable of profiling the
+ whole system, include the kernel, kernel modules, libraries,
+ and applications.
+
+ If unsure, say N.
+
+endmenu
+
diff --git a/arch/sh64/oprofile/Makefile b/arch/sh64/oprofile/Makefile
new file mode 100644
index 000000000000..11a451f6a9c3
--- /dev/null
+++ b/arch/sh64/oprofile/Makefile
@@ -0,0 +1,12 @@
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+profdrvr-y := op_model_null.o
+
+oprofile-y := $(DRIVER_OBJS) $(profdrvr-y)
+
diff --git a/arch/sh64/oprofile/op_model_null.c b/arch/sh64/oprofile/op_model_null.c
new file mode 100644
index 000000000000..a845b088edb4
--- /dev/null
+++ b/arch/sh64/oprofile/op_model_null.c
@@ -0,0 +1,23 @@
+/*
+ * arch/sh/oprofile/op_model_null.c
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+ return -ENODEV;
+}
+
+void oprofile_arch_exit(void)
+{
+}
+