x86, intr-remap: enable interrupt remapping early

Currently, when x2apic is not enabled, interrupt remapping
will be enabled in init_dmars(), where it is too late to remap
ioapic interrupts, that is, ioapic interrupts are really in
compatibility mode, not remappable mode.

This patch always enables interrupt remapping before ioapic
setup, it guarantees all interrupts will be remapped when
interrupt remapping is enabled. Thus it doesn't need to set
the compatibility interrupt bit.

[ Impact: refactor intr-remap init sequence, enable fuller remap mode ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: allen.m.kay@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1239957736-6161-4-git-send-email-weidong.han@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

2 files changed, 39 insertions, 44 deletions

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index d4cb7e590c06..fbdd65446c7a 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -169,7 +169,6 @@ static inline u64 native_x2apic_icr_read(void)
 extern int x2apic, x2apic_phys;
 extern void check_x2apic(void);
 extern void enable_x2apic(void);
-extern void enable_IR_x2apic(void);
 extern void x2apic_icr_write(u32 low, u32 id);
 static inline int x2apic_enabled(void)
 {
@@ -190,18 +189,18 @@ static inline void check_x2apic(void)
 static inline void enable_x2apic(void)
 {
 }
-static inline void enable_IR_x2apic(void)
-{
-}
 static inline int x2apic_enabled(void)
 {
 	return 0;
 }
 
 #define	x2apic	0
+#define	x2apic_preenabled 0
 
 #endif
 
+extern void enable_IR_x2apic(void);
+
 extern int get_physical_broadcast(void);
 
 extern void apic_disable(void);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 83e47febcc89..0cf1eea750cc 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -141,6 +141,8 @@ static int x2apic_preenabled;
 static int disable_x2apic;
 static __init int setup_nox2apic(char *str)
 {
+	if (x2apic_enabled())
+		panic("Bios already enabled x2apic, can't enforce nox2apic");
 	disable_x2apic = 1;
 	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
 	return 0;
@@ -1345,6 +1347,7 @@ void enable_x2apic(void)
 		wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
 	}
 }
+#endif /* CONFIG_X86_X2APIC */
 
 void __init enable_IR_x2apic(void)
 {
@@ -1353,32 +1356,21 @@ void __init enable_IR_x2apic(void)
 	unsigned long flags;
 	struct IO_APIC_route_entry **ioapic_entries = NULL;
 
-	if (!cpu_has_x2apic)
-		return;
-
-	if (!x2apic_preenabled && disable_x2apic) {
-		pr_info("Skipped enabling x2apic and Interrupt-remapping "
-			"because of nox2apic\n");
-		return;
+	ret = dmar_table_init();
+	if (ret) {
+		pr_debug("dmar_table_init() failed with %d:\n", ret);
+		goto ir_failed;
 	}
 
-	if (x2apic_preenabled && disable_x2apic)
-		panic("Bios already enabled x2apic, can't enforce nox2apic");
-
-	if (!x2apic_preenabled && skip_ioapic_setup) {
-		pr_info("Skipped enabling x2apic and Interrupt-remapping "
-			"because of skipping io-apic setup\n");
-		return;
+	if (!intr_remapping_supported()) {
+		pr_debug("intr-remapping not supported\n");
+		goto ir_failed;
 	}
 
-	ret = dmar_table_init();
-	if (ret) {
-		pr_info("dmar_table_init() failed with %d:\n", ret);
 
-		if (x2apic_preenabled)
-			panic("x2apic enabled by bios. But IR enabling failed");
-		else
-			pr_info("Not enabling x2apic,Intr-remapping\n");
+	if (!x2apic_preenabled && skip_ioapic_setup) {
+		pr_info("Skipped enabling intr-remap because of skipping "
+			"io-apic setup\n");
 		return;
 	}
 
@@ -1398,20 +1390,25 @@ void __init enable_IR_x2apic(void)
 	mask_IO_APIC_setup(ioapic_entries);
 	mask_8259A();
 
-	ret = enable_intr_remapping(EIM_32BIT_APIC_ID);
-
-	if (ret && x2apic_preenabled) {
-		local_irq_restore(flags);
-		panic("x2apic enabled by bios. But IR enabling failed");
-	}
+#ifdef CONFIG_X86_X2APIC
+	if (cpu_has_x2apic)
+		ret = enable_intr_remapping(EIM_32BIT_APIC_ID);
+	else
+#endif
+		ret = enable_intr_remapping(EIM_8BIT_APIC_ID);
 
 	if (ret)
 		goto end_restore;
 
-	if (!x2apic) {
+	pr_info("Enabled Interrupt-remapping\n");
+
+#ifdef CONFIG_X86_X2APIC
+	if (cpu_has_x2apic && !x2apic) {
 		x2apic = 1;
 		enable_x2apic();
+		pr_info("Enabled x2apic\n");
 	}
+#endif
 
 end_restore:
 	if (ret)
@@ -1426,30 +1423,29 @@ end_restore:
 	local_irq_restore(flags);
 
 end:
-	if (!ret) {
-		if (!x2apic_preenabled)
-			pr_info("Enabled x2apic and interrupt-remapping\n");
-		else
-			pr_info("Enabled Interrupt-remapping\n");
-	} else
-		pr_err("Failed to enable Interrupt-remapping and x2apic\n");
 	if (ioapic_entries)
 		free_ioapic_entries(ioapic_entries);
+
+	if (!ret)
+		return;
+
+ir_failed:
+	if (x2apic_preenabled)
+		panic("x2apic enabled by bios. But IR enabling failed");
+	else if (cpu_has_x2apic)
+		pr_info("Not enabling x2apic,Intr-remapping\n");
 #else
 	if (!cpu_has_x2apic)
 		return;
 
 	if (x2apic_preenabled)
 		panic("x2apic enabled prior OS handover,"
-		      " enable CONFIG_INTR_REMAP");
-
-	pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping "
-		" and x2apic\n");
+		      " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
 #endif
 
 	return;
 }
-#endif /* CONFIG_X86_X2APIC */
+
 
 #ifdef CONFIG_X86_64
 /*