summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLokesh Vutla <lokeshvutla@ti.com>2014-09-04 08:23:28 -0500
committerTony Lindgren <tony@atomide.com>2014-09-04 12:49:22 -0700
commitc7cc9ba11f8c09a4d12af0fc4aa9f9b026cdd354 (patch)
treeee5463ceed73951401db8f535f90c9b48ccf2ca0 /arch
parent68e4d9e58dbae2fb178e8b74806f521adb16f0d3 (diff)
ARM: dts: dra7-evm: Add vtt regulator support
DRA7 evm REV G and later boards uses a vtt regulator for DDR3 termination and this is controlled by gpio7_11. This gpio is configured in boot loader. gpio7_11, which is only available only on Pad A22, in previous boards, is connected only to an unused pad on expansion connector EXP_P3 and is safe to be muxed as GPIO on all DRA7-evm versions (without a need to spin off another dts file). Since gpio7_11 is used to control VTT and should not be reset or kept in idle state during boot up else VTT will be disconnected and DDR gets corrupted. So, as part of this change, mark gpio7 as no-reset and no-idle on init. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts27
1 files changed, 26 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index b80c67b6fe01..e03fbf3c6889 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "TI DRA742";
@@ -24,9 +25,29 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ vtt_fixed: fixedregulator-vtt {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ };
};
&dra7_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vtt_pin>;
+
+ vtt_pin: pinmux_vtt_pin {
+ pinctrl-single,pins = <
+ 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+ >;
+ };
+
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
@@ -54,7 +75,6 @@
0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
- 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs1 */
0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
>;
@@ -504,3 +524,8 @@
&usb2_phy2 {
phy-supply = <&ldousb_reg>;
};
+
+&gpio7 {
+ ti,no-reset-on-init;
+ ti,no-idle-on-init;
+};