Merge remote-tracking branch 'linus/master' into patchwork

There are some patches that depends on media-v3.16-rc6.
So, merge back from upstream before applying them.

* linus/master: (1123 commits)
  drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
  drm/bochs: add missing drm_connector_register call
  drm/cirrus: add missing drm_connector_register call
  staging: vt6655: buffer overflow in ioctl
  USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
  USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
  USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
  USB: EHCI: unlink QHs even after the controller has stopped
  [SCSI] fix for bidi use after free
  [SCSI] fix regression that accidentally disabled block-based tcq
  [SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
  drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
  drm/nouveau/runpm: fix module unload
  drm/radeon/px: fix module unload
  vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
  drm/radeon: don't reset dma on r6xx-evergreen init
  drm/radeon: don't reset sdma on CIK init
  drm/radeon: don't reset dma on NI/SI init
  drm/radeon/dpm: fix resume on mullins
  drm/radeon: Disable HDP flush before every CS again for < r600
  ...

10 files changed, 152 insertions, 50 deletions

diff --git a/drivers/acpi/acpi_cmos_rtc.c b/drivers/acpi/acpi_cmos_rtc.c
index 2da8660262e5..81dc75033f15 100644
--- a/drivers/acpi/acpi_cmos_rtc.c
+++ b/drivers/acpi/acpi_cmos_rtc.c
@@ -33,7 +33,7 @@ acpi_cmos_rtc_space_handler(u32 function, acpi_physical_address address,
 		      void *handler_context, void *region_context)
 {
 	int i;
-	u8 *value = (u8 *)&value64;
+	u8 *value = (u8 *)value64;
 
 	if (address > 0xff || !value64)
 		return AE_BAD_PARAMETER;
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index ce06149088c5..fddc1e86f9d0 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -196,6 +196,17 @@ static struct lpss_device_desc byt_i2c_dev_desc = {
 	.setup = lpss_i2c_setup,
 };
 
+static struct lpss_shared_clock bsw_pwm_clock = {
+	.name = "pwm_clk",
+	.rate = 19200000,
+};
+
+static struct lpss_device_desc bsw_pwm_dev_desc = {
+	.clk_required = true,
+	.save_ctx = true,
+	.shared_clock = &bsw_pwm_clock,
+};
+
 #else
 
 #define LPSS_ADDR(desc) (0UL)
@@ -225,6 +236,12 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = {
 	{ "INT33B2", },
 	{ "INT33FC", },
 
+	/* Braswell LPSS devices */
+	{ "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
+	{ "8086228A", LPSS_ADDR(byt_uart_dev_desc) },
+	{ "8086228E", LPSS_ADDR(byt_spi_dev_desc) },
+	{ "808622C1", LPSS_ADDR(byt_i2c_dev_desc) },
+
 	{ "INT3430", LPSS_ADDR(lpt_dev_desc) },
 	{ "INT3431", LPSS_ADDR(lpt_dev_desc) },
 	{ "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
@@ -593,7 +610,7 @@ static int acpi_lpss_suspend_late(struct device *dev)
 	return acpi_dev_suspend_late(dev);
 }
 
-static int acpi_lpss_restore_early(struct device *dev)
+static int acpi_lpss_resume_early(struct device *dev)
 {
 	int ret = acpi_dev_resume_early(dev);
 
@@ -633,15 +650,15 @@ static int acpi_lpss_runtime_resume(struct device *dev)
 static struct dev_pm_domain acpi_lpss_pm_domain = {
 	.ops = {
 #ifdef CONFIG_PM_SLEEP
-		.suspend_late = acpi_lpss_suspend_late,
-		.restore_early = acpi_lpss_restore_early,
 		.prepare = acpi_subsys_prepare,
 		.complete = acpi_subsys_complete,
 		.suspend = acpi_subsys_suspend,
-		.resume_early = acpi_subsys_resume_early,
+		.suspend_late = acpi_lpss_suspend_late,
+		.resume_early = acpi_lpss_resume_early,
 		.freeze = acpi_subsys_freeze,
 		.poweroff = acpi_subsys_suspend,
-		.poweroff_late = acpi_subsys_suspend_late,
+		.poweroff_late = acpi_lpss_suspend_late,
+		.restore_early = acpi_lpss_resume_early,
 #endif
 #ifdef CONFIG_PM_RUNTIME
 		.runtime_suspend = acpi_lpss_runtime_suspend,
diff --git a/drivers/acpi/acpica/nsprepkg.c b/drivers/acpi/acpica/nsprepkg.c
index 68f725839eb6..1b13b921dda9 100644
--- a/drivers/acpi/acpica/nsprepkg.c
+++ b/drivers/acpi/acpica/nsprepkg.c
@@ -316,6 +316,45 @@ acpi_ns_check_package(struct acpi_evaluate_info *info,
 		    acpi_ns_check_package_list(info, package, elements, count);
 		break;
 
+	case ACPI_PTYPE2_UUID_PAIR:
+
+		/* The package must contain pairs of (UUID + type) */
+
+		if (count & 1) {
+			expected_count = count + 1;
+			goto package_too_small;
+		}
+
+		while (count > 0) {
+			status = acpi_ns_check_object_type(info, elements,
+							   package->ret_info.
+							   object_type1, 0);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+
+			/* Validate length of the UUID buffer */
+
+			if ((*elements)->buffer.length != 16) {
+				ACPI_WARN_PREDEFINED((AE_INFO,
+						      info->full_pathname,
+						      info->node_flags,
+						      "Invalid length for UUID Buffer"));
+				return (AE_AML_OPERAND_VALUE);
+			}
+
+			status = acpi_ns_check_object_type(info, elements + 1,
+							   package->ret_info.
+							   object_type2, 0);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+
+			elements += 2;
+			count -= 2;
+		}
+		break;
+
 	default:
 
 		/* Should not get here if predefined info table is correct */
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 1c162e7be045..5fdfe65fe165 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -534,20 +534,6 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 			" invalid.\n");
 	}
 
-	/*
-	 * When fully charged, some batteries wrongly report
-	 * capacity_now = design_capacity instead of = full_charge_capacity
-	 */
-	if (battery->capacity_now > battery->full_charge_capacity
-	    && battery->full_charge_capacity != ACPI_BATTERY_VALUE_UNKNOWN) {
-		if (battery->capacity_now != battery->design_capacity)
-			printk_once(KERN_WARNING FW_BUG
-				"battery: reported current charge level (%d) "
-				"is higher than reported maximum charge level (%d).\n",
-				battery->capacity_now, battery->full_charge_capacity);
-		battery->capacity_now = battery->full_charge_capacity;
-	}
-
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)
 	    && battery->capacity_now >= 0 && battery->capacity_now <= 100)
 		battery->capacity_now = (battery->capacity_now *
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 8581f5b84f48..8b67bd0f6bb5 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -177,16 +177,6 @@ void acpi_bus_detach_private_data(acpi_handle handle)
 }
 EXPORT_SYMBOL_GPL(acpi_bus_detach_private_data);
 
-void acpi_bus_no_hotplug(acpi_handle handle)
-{
-	struct acpi_device *adev = NULL;
-
-	acpi_bus_get_device(handle, &adev);
-	if (adev)
-		adev->flags.no_hotplug = true;
-}
-EXPORT_SYMBOL_GPL(acpi_bus_no_hotplug);
-
 static void acpi_print_osc_error(acpi_handle handle,
 	struct acpi_osc_context *context, char *error)
 {
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index a66ab658abbc..cb6066c809ea 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -197,6 +197,8 @@ static bool advance_transaction(struct acpi_ec *ec)
 				t->rdata[t->ri++] = acpi_ec_read_data(ec);
 				if (t->rlen == t->ri) {
 					t->flags |= ACPI_EC_COMMAND_COMPLETE;
+					if (t->command == ACPI_EC_COMMAND_QUERY)
+						pr_debug("hardware QR_EC completion\n");
 					wakeup = true;
 				}
 			} else
@@ -208,7 +210,20 @@ static bool advance_transaction(struct acpi_ec *ec)
 		}
 		return wakeup;
 	} else {
-		if ((status & ACPI_EC_FLAG_IBF) == 0) {
+		/*
+		 * There is firmware refusing to respond QR_EC when SCI_EVT
+		 * is not set, for which case, we complete the QR_EC
+		 * without issuing it to the firmware.
+		 * https://bugzilla.kernel.org/show_bug.cgi?id=86211
+		 */
+		if (!(status & ACPI_EC_FLAG_SCI) &&
+		    (t->command == ACPI_EC_COMMAND_QUERY)) {
+			t->flags |= ACPI_EC_COMMAND_POLL;
+			t->rdata[t->ri++] = 0x00;
+			t->flags |= ACPI_EC_COMMAND_COMPLETE;
+			pr_debug("software QR_EC completion\n");
+			wakeup = true;
+		} else if ((status & ACPI_EC_FLAG_IBF) == 0) {
 			acpi_ec_write_cmd(ec, t->command);
 			t->flags |= ACPI_EC_COMMAND_POLL;
 		} else
@@ -288,11 +303,11 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
 	/* following two actions should be kept atomic */
 	ec->curr = t;
 	start_transaction(ec);
-	if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
-		clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
 	spin_unlock_irqrestore(&ec->lock, tmp);
 	ret = ec_poll(ec);
 	spin_lock_irqsave(&ec->lock, tmp);
+	if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
+		clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
 	ec->curr = NULL;
 	spin_unlock_irqrestore(&ec->lock, tmp);
 	return ret;
@@ -1015,6 +1030,10 @@ static struct dmi_system_id ec_dmi_table[] __initdata = {
 	DMI_MATCH(DMI_SYS_VENDOR, "Quanta"),
 	DMI_MATCH(DMI_PRODUCT_NAME, "TW9/SW9"),}, NULL},
 	{
+	ec_flag_msi, "Clevo W350etq", {
+	DMI_MATCH(DMI_SYS_VENDOR, "CLEVO CO."),
+	DMI_MATCH(DMI_PRODUCT_NAME, "W35_37ET"),}, NULL},
+	{
 	ec_validate_ecdt, "ASUS hardware", {
 	DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
 	{
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index c96887d5289e..6e6b80eb0bba 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -484,6 +484,10 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
 	/* Keep IOAPIC pin configuration when suspending */
 	if (dev->dev.power.is_prepared)
 		return;
+#ifdef	CONFIG_PM_RUNTIME
+	if (dev->dev.power.runtime_status == RPM_SUSPENDING)
+		return;
+#endif
 
 	entry = acpi_pci_irq_lookup(dev, pin);
 	if (!entry)
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 3dca36d4ad26..17f9ec501972 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1071,9 +1071,9 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
 
 	if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
 
-		cpuidle_pause_and_lock();
 		/* Protect against cpu-hotplug */
 		get_online_cpus();
+		cpuidle_pause_and_lock();
 
 		/* Disable all cpuidle devices */
 		for_each_online_cpu(cpu) {
@@ -1100,8 +1100,8 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
 				cpuidle_enable_device(dev);
 			}
 		}
-		put_online_cpus();
 		cpuidle_resume_and_unlock();
+		put_online_cpus();
 	}
 
 	return 0;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 0a817ad24f16..3bf7764659a4 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -667,8 +667,14 @@ static ssize_t
 acpi_device_sun_show(struct device *dev, struct device_attribute *attr,
 		     char *buf) {
 	struct acpi_device *acpi_dev = to_acpi_device(dev);
+	acpi_status status;
+	unsigned long long sun;
+
+	status = acpi_evaluate_integer(acpi_dev->handle, "_SUN", NULL, &sun);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
 
-	return sprintf(buf, "%lu\n", acpi_dev->pnp.sun);
+	return sprintf(buf, "%llu\n", sun);
 }
 static DEVICE_ATTR(sun, 0444, acpi_device_sun_show, NULL);
 
@@ -690,7 +696,6 @@ static int acpi_device_setup_files(struct acpi_device *dev)
 {
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
 	acpi_status status;
-	unsigned long long sun;
 	int result = 0;
 
 	/*
@@ -731,14 +736,10 @@ static int acpi_device_setup_files(struct acpi_device *dev)
 	if (dev->pnp.unique_id)
 		result = device_create_file(&dev->dev, &dev_attr_uid);
 
-	status = acpi_evaluate_integer(dev->handle, "_SUN", NULL, &sun);
-	if (ACPI_SUCCESS(status)) {
-		dev->pnp.sun = (unsigned long)sun;
+	if (acpi_has_method(dev->handle, "_SUN")) {
 		result = device_create_file(&dev->dev, &dev_attr_sun);
 		if (result)
 			goto end;
-	} else {
-		dev->pnp.sun = (unsigned long)-1;
 	}
 
 	if (acpi_has_method(dev->handle, "_STA")) {
@@ -922,12 +923,17 @@ static void acpi_device_notify(acpi_handle handle, u32 event, void *data)
 	device->driver->ops.notify(device, event);
 }
 
-static acpi_status acpi_device_notify_fixed(void *data)
+static void acpi_device_notify_fixed(void *data)
 {
 	struct acpi_device *device = data;
 
 	/* Fixed hardware devices have no handles */
 	acpi_device_notify(NULL, ACPI_FIXED_HARDWARE_EVENT, device);
+}
+
+static acpi_status acpi_device_fixed_event(void *data)
+{
+	acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_device_notify_fixed, data);
 	return AE_OK;
 }
 
@@ -938,12 +944,12 @@ static int acpi_device_install_notify_handler(struct acpi_device *device)
 	if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
 		status =
 		    acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
-						     acpi_device_notify_fixed,
+						     acpi_device_fixed_event,
 						     device);
 	else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
 		status =
 		    acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
-						     acpi_device_notify_fixed,
+						     acpi_device_fixed_event,
 						     device);
 	else
 		status = acpi_install_notify_handler(device->handle,
@@ -960,10 +966,10 @@ static void acpi_device_remove_notify_handler(struct acpi_device *device)
 {
 	if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
 		acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
-						acpi_device_notify_fixed);
+						acpi_device_fixed_event);
 	else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
 		acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
-						acpi_device_notify_fixed);
+						acpi_device_fixed_event);
 	else
 		acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
 					   acpi_device_notify);
@@ -975,7 +981,7 @@ static int acpi_device_probe(struct device *dev)
 	struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver);
 	int ret;
 
-	if (acpi_dev->handler)
+	if (acpi_dev->handler && !acpi_is_pnp_device(acpi_dev))
 		return -EINVAL;
 
 	if (!acpi_drv->ops.add)
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 826884392e6b..fcbda105616e 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -82,9 +82,9 @@ module_param(allow_duplicates, bool, 0644);
  * For Windows 8 systems: used to decide if video module
  * should skip registering backlight interface of its own.
  */
-static int use_native_backlight_param = 1;
+static int use_native_backlight_param = -1;
 module_param_named(use_native_backlight, use_native_backlight_param, int, 0444);
-static bool use_native_backlight_dmi = false;
+static bool use_native_backlight_dmi = true;
 
 static int register_count;
 static struct mutex video_list_lock;
@@ -417,6 +417,12 @@ static int __init video_set_use_native_backlight(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init video_disable_native_backlight(const struct dmi_system_id *d)
+{
+	use_native_backlight_dmi = false;
+	return 0;
+}
+
 static struct dmi_system_id video_dmi_table[] __initdata = {
 	/*
 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -720,6 +726,41 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 8780w"),
 		},
 	},
+
+	/*
+	 * These models have a working acpi_video backlight control, and using
+	 * native backlight causes a regression where backlight does not work
+	 * when userspace is not handling brightness key events. Disable
+	 * native_backlight on these to fix this:
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=81691
+	 */
+	{
+	 .callback = video_disable_native_backlight,
+	 .ident = "ThinkPad T420",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T420"),
+		},
+	},
+	{
+	 .callback = video_disable_native_backlight,
+	 .ident = "ThinkPad T520",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T520"),
+		},
+	},
+
+	/* The native backlight controls do not work on some older machines */
+	{
+	 /* https://bugs.freedesktop.org/show_bug.cgi?id=81515 */
+	 .callback = video_disable_native_backlight,
+	 .ident = "HP ENVY 15 Notebook",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"),
+		},
+	},
 	{}
 };