Bluetooth: btmrvl: add calibration data download support

A text file containing calibration data in hex format can
be provided at following path:

/lib/firmware/mrvl/sd8797_caldata.conf

The data will be downloaded to firmware during initialization.

Reviewed-by: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

1 files changed, 116 insertions, 0 deletions

diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index e0ae1f4ea406..6e7bd4e4adbb 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -432,12 +432,128 @@ static int btmrvl_open(struct hci_dev *hdev)
 	return 0;
 }
 
+/*
+ * This function parses provided calibration data input. It should contain
+ * hex bytes separated by space or new line character. Here is an example.
+ * 00 1C 01 37 FF FF FF FF 02 04 7F 01
+ * CE BA 00 00 00 2D C6 C0 00 00 00 00
+ * 00 F0 00 00
+ */
+static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size)
+{
+	const u8 *s = src;
+	u8 *d = dst;
+	int ret;
+	u8 tmp[3];
+
+	tmp[2] = '\0';
+	while ((s - src) <= len - 2) {
+		if (isspace(*s)) {
+			s++;
+			continue;
+		}
+
+		if (isxdigit(*s)) {
+			if ((d - dst) >= dst_size) {
+				BT_ERR("calibration data file too big!!!");
+				return -EINVAL;
+			}
+
+			memcpy(tmp, s, 2);
+
+			ret = kstrtou8(tmp, 16, d++);
+			if (ret < 0)
+				return ret;
+
+			s += 2;
+		} else {
+			return -EINVAL;
+		}
+	}
+	if (d == dst)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int btmrvl_load_cal_data(struct btmrvl_private *priv,
+				u8 *config_data)
+{
+	int i, ret;
+	u8 data[BT_CMD_DATA_SIZE];
+
+	data[0] = 0x00;
+	data[1] = 0x00;
+	data[2] = 0x00;
+	data[3] = BT_CMD_DATA_SIZE - 4;
+
+	/* Swap cal-data bytes. Each four bytes are swapped. Considering 4
+	 * byte SDIO header offset, mapping of input and output bytes will be
+	 * {3, 2, 1, 0} -> {0+4, 1+4, 2+4, 3+4},
+	 * {7, 6, 5, 4} -> {4+4, 5+4, 6+4, 7+4} */
+	for (i = 4; i < BT_CMD_DATA_SIZE; i++)
+		data[i] = config_data[(i / 4) * 8 - 1 - i];
+
+	print_hex_dump_bytes("Calibration data: ",
+			     DUMP_PREFIX_OFFSET, data, BT_CMD_DATA_SIZE);
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,
+				   BT_CMD_DATA_SIZE);
+	if (ret)
+		BT_ERR("Failed to download caibration data\n");
+
+	return 0;
+}
+
+static int
+btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size)
+{
+	u8 cal_data[BT_CAL_DATA_SIZE];
+	int ret;
+
+	ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data));
+	if (ret)
+		return ret;
+
+	ret = btmrvl_load_cal_data(priv, cal_data);
+	if (ret) {
+		BT_ERR("Fail to load calibrate data");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int btmrvl_cal_data_config(struct btmrvl_private *priv)
+{
+	const struct firmware *cfg;
+	int ret;
+	const char *cal_data = priv->btmrvl_dev.cal_data;
+
+	if (!cal_data)
+		return 0;
+
+	ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev);
+	if (ret < 0) {
+		BT_DBG("Failed to get %s file, skipping cal data download",
+		       cal_data);
+		return 0;
+	}
+
+	ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size);
+	release_firmware(cfg);
+	return ret;
+}
+
 static int btmrvl_setup(struct hci_dev *hdev)
 {
 	struct btmrvl_private *priv = hci_get_drvdata(hdev);
 
 	btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
 
+	if (btmrvl_cal_data_config(priv))
+		BT_ERR("Set cal data failed");
+
 	priv->btmrvl_dev.psmode = 1;
 	btmrvl_enable_ps(priv);