V4L/DVB (7914): Anysee: driver for Anysee DVB-T/C receiver

- driver for Anysee DVB-T/C receiver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

5 files changed, 873 insertions, 0 deletions

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index f00a0eb40420..3f7b9b6326b3 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -241,3 +241,12 @@ config DVB_USB_AF9005_REMOTE
 	  Say Y here to support the default remote control decoding for the
 	  Afatech AF9005 based receiver.
 
+config DVB_USB_ANYSEE
+	tristate "Anysee DVB-T/C USB2.0 support"
+	depends on DVB_USB
+	select DVB_MT352 if !DVB_FE_CUSTOMISE
+	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the Anysee E30, Anysee E30 Plus or
+	  Anysee E30 C Plus DVB USB2.0 receiver.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index c6511a6c0ab8..44c11e45e564 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -61,6 +61,9 @@ obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o
 dvb-usb-af9005-remote-objs = af9005-remote.o
 obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
 
+dvb-usb-anysee-objs = anysee.o
+obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
new file mode 100644
index 000000000000..dada92a14cf3
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -0,0 +1,555 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This
+ * module registers serial interface that can be used to comminicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#include "anysee.h"
+#include "tda1002x.h"
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "zl10353.h"
+
+/* debug */
+static int dvb_usb_anysee_debug;
+module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct mutex anysee_usb_mutex;
+
+static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
+	u8 *rbuf, u8 rlen)
+{
+	struct anysee_state *state = d->priv;
+	int act_len, ret;
+	u8 buf[64];
+
+	if (slen > sizeof(buf))
+		slen = sizeof(buf);
+	memcpy(&buf[0], sbuf, slen);
+	buf[60] = state->seq++;
+
+	if (mutex_lock_interruptible(&anysee_usb_mutex) < 0)
+		return -EAGAIN;
+
+	/* We need receive one message more after dvb_usb_generic_rw due
+	   to weird transaction flow, which is 1 x send + 2 x receive. */
+	ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
+
+	if (!ret) {
+		/* receive 2nd answer */
+		ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
+			d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf),
+			&act_len, 2000);
+		if (ret)
+			err("%s: recv bulk message failed: %d", __func__, ret);
+		else {
+			deb_xfer("<<< ");
+			debug_dump(buf, act_len, deb_xfer);
+		}
+	}
+
+	/* read request, copy returned data to return buf */
+	if (!ret && rbuf && rlen)
+		memcpy(rbuf, buf, rlen);
+
+	mutex_unlock(&anysee_usb_mutex);
+
+	return ret;
+}
+
+static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+	u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
+	int ret;
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
+	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val);
+	return ret;
+}
+
+static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+	u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
+	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
+{
+	u8 buf[] = {CMD_GET_HW_INFO};
+	return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
+}
+
+static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
+	deb_info("%s: onoff:%02x\n", __func__, onoff);
+	return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
+	deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
+	deb_info("%s: onoff:%02x\n", __func__, onoff);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_init(struct dvb_usb_device *d)
+{
+	int ret;
+	/* LED light */
+	ret = anysee_led_ctrl(d, 0x01, 0x03);
+	if (ret)
+		return ret;
+
+	/* enable IR */
+	ret = anysee_ir_ctrl(d, 1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/* I2C */
+static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+	int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int ret, inc, i = 0;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	while (i < num) {
+		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			u8 buf[6];
+			buf[0] = CMD_I2C_READ;
+			buf[1] = msg[i].addr + 1;
+			buf[2] = msg[i].buf[0];
+			buf[3] = 0x00;
+			buf[4] = 0x00;
+			buf[5] = 0x01;
+			ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf,
+				msg[i+1].len);
+			inc = 2;
+		} else {
+			u8 buf[4+msg[i].len];
+			buf[0] = CMD_I2C_WRITE;
+			buf[1] = msg[i].addr;
+			buf[2] = msg[i].len;
+			buf[3] = 0x01;
+			memcpy(&buf[4], msg[i].buf, msg[i].len);
+			ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+			inc = 1;
+		}
+		if (ret)
+			return ret;
+
+		i += inc;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return i;
+}
+
+static u32 anysee_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm anysee_i2c_algo = {
+	.master_xfer   = anysee_master_xfer,
+	.functionality = anysee_i2c_func,
+};
+
+static int anysee_mt352_demod_init(struct dvb_frontend *fe)
+{
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
+	static u8 reset []         = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
+	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 };
+	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+/* Callbacks for DVB USB */
+static struct tda10023_config anysee_tda10023_config = {
+	.demod_address = 0x1a,
+	.invert = 0,
+	.xtal   = 16000000,
+	.pll_m  = 11,
+	.pll_p  = 3,
+	.pll_n  = 1,
+	.deltaf = 0xfed6,
+};
+
+static struct mt352_config anysee_mt352_config = {
+	.demod_address = 0x1e,
+	.demod_init    = anysee_mt352_demod_init,
+};
+
+static struct zl10353_config anysee_zl10353_config = {
+	.demod_address = 0x1e,
+	.parallel_ts = 1,
+};
+
+static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	struct anysee_state *state = adap->dev->priv;
+	u8 hw_info[3];
+	u8 io_d; /* IO port D */
+
+	/* check which hardware we have
+	   We must do this call two times to get reliable values (hw bug). */
+	ret = anysee_get_hw_info(adap->dev, hw_info);
+	if (ret)
+		return ret;
+	ret = anysee_get_hw_info(adap->dev, hw_info);
+	if (ret)
+		return ret;
+
+	/* Meaning of these info bytes are guessed. */
+	info("firmware version:%d.%d.%d hardware id:%d",
+		0, hw_info[1], hw_info[2], hw_info[0]);
+
+	ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */
+	if (ret)
+		return ret;
+	deb_info("%s: IO port D:%02x\n", __func__, io_d);
+
+	/* Select demod using trial and error method. */
+
+	/* Try to attach demodulator in following order:
+	      model      demod     hw  firmware
+	   1. E30        MT352     02  0.2.1
+	   2. E30        ZL10353   02  0.2.1
+	   3. E30 Plus   ZL10353   06  0.1.0
+	   4. E30C Plus  TDA10023  0a  0.1.0
+	      E30C Plus  TDA10023  0f  0.1.2 (not working)
+	*/
+
+	/* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
+	adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_THOMSON_DTT7579;
+		return 0;
+	}
+
+	/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
+	adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_THOMSON_DTT7579;
+		return 0;
+	}
+
+	/* connect demod on IO port D for TDA10023 & ZL10353 */
+	ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
+	if (ret)
+		return ret;
+
+	/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
+	adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_THOMSON_DTT7579;
+		return 0;
+	}
+
+	/* known not working (E30C Plus v0.1.2) */
+	if (hw_info[0] == 0x0f) {
+		info("this version of Anysee is not supported yet");
+		/* return IO port D to init value for safe */
+		ret = anysee_write_reg(adap->dev, 0xb0, io_d);
+		return -ENODEV;
+	}
+
+	/* Philips TDA10023 DVB-C demod */
+	adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
+			      &adap->dev->i2c_adap, 0x48);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
+		return 0;
+	}
+
+	/* return IO port D to init value for safe */
+	ret = anysee_write_reg(adap->dev, 0xb0, io_d);
+	if (ret)
+		return ret;
+
+	err("Unkown Anysee version: %02x %02x %02x. "\
+	    "Please report the <linux-dvb@linuxtv.org>.",
+	    hw_info[0], hw_info[1], hw_info[2]);
+
+	return -ENODEV;
+}
+
+static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct anysee_state *state = adap->dev->priv;
+	deb_info("%s: \n", __func__);
+
+	switch (state->tuner) {
+	case DVB_PLL_THOMSON_DTT7579:
+		/* Thomson dtt7579 (not sure) PLL inside of:
+		   Samsung DNOS404ZH102A NIM
+		   Samsung DNOS404ZH103A NIM */
+		dvb_attach(dvb_pll_attach, adap->fe, 0x61,
+			   NULL, DVB_PLL_THOMSON_DTT7579);
+		break;
+	case DVB_PLL_SAMSUNG_DTOS403IH102A:
+		/* Unknown PLL inside of Samsung DTOS403IH102A tuner module */
+		dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
+			   &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+		break;
+	}
+
+	return 0;
+}
+
+static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+	u8 buf[] = {CMD_GET_IR_CODE};
+	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	u8 ircode[2];
+	int i, ret;
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2);
+	if (ret)
+		return ret;
+
+	*event = 0;
+	*state = REMOTE_NO_KEY_PRESSED;
+
+	for (i = 0; i < d->props.rc_key_map_size; i++) {
+		if (keymap[i].custom == ircode[0] &&
+		    keymap[i].data == ircode[1]) {
+			*event = keymap[i].event;
+			*state = REMOTE_KEY_PRESSED;
+			return 0;
+		}
+	}
+	return 0;
+}
+
+static struct dvb_usb_rc_key anysee_rc_keys[] = {
+	{ 0x01, 0x00, KEY_0 },
+	{ 0x01, 0x01, KEY_1 },
+	{ 0x01, 0x02, KEY_2 },
+	{ 0x01, 0x03, KEY_3 },
+	{ 0x01, 0x04, KEY_4 },
+	{ 0x01, 0x05, KEY_5 },
+	{ 0x01, 0x06, KEY_6 },
+	{ 0x01, 0x07, KEY_7 },
+	{ 0x01, 0x08, KEY_8 },
+	{ 0x01, 0x09, KEY_9 },
+	{ 0x01, 0x0a, KEY_POWER },
+	{ 0x01, 0x0b, KEY_DOCUMENTS },    /* * */
+	{ 0x01, 0x19, KEY_FAVORITES },
+	{ 0x01, 0x20, KEY_SLEEP },
+	{ 0x01, 0x21, KEY_MODE },         /* 4:3 / 16:9 select */
+	{ 0x01, 0x22, KEY_ZOOM },
+	{ 0x01, 0x47, KEY_TEXT },
+	{ 0x01, 0x16, KEY_TV },           /* TV / radio select */
+	{ 0x01, 0x1e, KEY_LANGUAGE },     /* Second Audio Program */
+	{ 0x01, 0x1a, KEY_SUBTITLE },
+	{ 0x01, 0x1b, KEY_CAMERA },       /* screenshot */
+	{ 0x01, 0x42, KEY_MUTE },
+	{ 0x01, 0x0e, KEY_MENU },
+	{ 0x01, 0x0f, KEY_EPG },
+	{ 0x01, 0x17, KEY_INFO },
+	{ 0x01, 0x10, KEY_EXIT },
+	{ 0x01, 0x13, KEY_VOLUMEUP },
+	{ 0x01, 0x12, KEY_VOLUMEDOWN },
+	{ 0x01, 0x11, KEY_CHANNELUP },
+	{ 0x01, 0x14, KEY_CHANNELDOWN },
+	{ 0x01, 0x15, KEY_OK },
+	{ 0x01, 0x1d, KEY_RED },
+	{ 0x01, 0x1f, KEY_GREEN },
+	{ 0x01, 0x1c, KEY_YELLOW },
+	{ 0x01, 0x44, KEY_BLUE },
+	{ 0x01, 0x0c, KEY_SHUFFLE },      /* snapshot */
+	{ 0x01, 0x48, KEY_STOP },
+	{ 0x01, 0x50, KEY_PLAY },
+	{ 0x01, 0x51, KEY_PAUSE },
+	{ 0x01, 0x49, KEY_RECORD },
+	{ 0x01, 0x18, KEY_PREVIOUS },     /* |<< */
+	{ 0x01, 0x0d, KEY_NEXT },         /* >>| */
+	{ 0x01, 0x24, KEY_PROG1 },        /* F1 */
+	{ 0x01, 0x25, KEY_PROG2 },        /* F2 */
+};
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties anysee_properties;
+
+static int anysee_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct dvb_usb_device *d;
+	struct usb_host_interface *alt;
+	int ret;
+
+	mutex_init(&anysee_usb_mutex);
+
+	/* There is one interface with two alternate settings.
+	   Alternate setting 0 is for bulk transfer.
+	   Alternate setting 1 is for isochronous transfer.
+	   We use bulk transfer (alternate setting 0). */
+	if (intf->num_altsetting < 1)
+		return -ENODEV;
+
+	ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
+		adapter_nr);
+	if (ret)
+		return ret;
+
+	alt = usb_altnum_to_altsetting(intf, 0);
+	if (alt == NULL) {
+		deb_info("%s: no alt found!\n", __func__);
+		return -ENODEV;
+	}
+
+	ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
+		alt->desc.bAlternateSetting);
+	if (ret)
+		return ret;
+
+	if (d)
+		ret = anysee_init(d);
+
+	return ret;
+}
+
+static struct usb_device_id anysee_table [] = {
+	{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
+	{ USB_DEVICE(USB_VID_AMT,     USB_PID_ANYSEE) },
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, anysee_table);
+
+static struct dvb_usb_device_properties anysee_properties = {
+	.caps             = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl         = DEVICE_SPECIFIC,
+
+	.size_of_priv     = sizeof(struct anysee_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = anysee_streaming_ctrl,
+			.frontend_attach  = anysee_frontend_attach,
+			.tuner_attach     = anysee_tuner_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 8,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 512,
+					}
+				}
+			},
+		}
+	},
+
+	.rc_key_map       = anysee_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(anysee_rc_keys),
+	.rc_query         = anysee_rc_query,
+	.rc_interval      = 200,  /* windows driver uses 500ms */
+
+	.i2c_algo         = &anysee_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 1,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "Anysee DVB USB2.0",
+			.cold_ids = {NULL},
+			.warm_ids = {&anysee_table[0],
+				     &anysee_table[1], NULL},
+		},
+	}
+};
+
+static struct usb_driver anysee_driver = {
+	.name       = "dvb_usb_anysee",
+	.probe      = anysee_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table   = anysee_table,
+};
+
+/* module stuff */
+static int __init anysee_module_init(void)
+{
+	int ret;
+
+	ret = usb_register(&anysee_driver);
+	if (ret)
+		err("%s: usb_register failed. Error number %d", __func__, ret);
+
+	return ret;
+}
+
+static void __exit anysee_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&anysee_driver);
+}
+
+module_init(anysee_module_init);
+module_exit(anysee_module_exit);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
new file mode 100644
index 000000000000..48da3949ef0b
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -0,0 +1,304 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This
+ * module registers serial interface that can be used to comminicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#ifndef _DVB_USB_ANYSEE_H_
+#define _DVB_USB_ANYSEE_H_
+
+#define DVB_USB_LOG_PREFIX "anysee"
+#include "dvb-usb.h"
+
+#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_anysee_debug, 0x04, args)
+#define deb_reg(args...)  dprintk(dvb_usb_anysee_debug, 0x08, args)
+#define deb_i2c(args...)  dprintk(dvb_usb_anysee_debug, 0x10, args)
+#define deb_fw(args...)   dprintk(dvb_usb_anysee_debug, 0x20, args)
+
+enum cmd {
+	CMD_I2C_READ            = 0x33,
+	CMD_I2C_WRITE           = 0x31,
+	CMD_REG_READ            = 0xb0,
+	CMD_REG_WRITE           = 0xb1,
+	CMD_STREAMING_CTRL      = 0x12,
+	CMD_LED_AND_IR_CTRL     = 0x16,
+	CMD_GET_IR_CODE         = 0x41,
+	CMD_GET_HW_INFO         = 0x19,
+	CMD_SMARTCARD           = 0x34,
+};
+
+struct anysee_state {
+	u8 tuner;
+	u8 seq;
+};
+
+#endif
+
+/***************************************************************************
+ * USB API description (reverse engineered)
+ ***************************************************************************
+
+Transaction flow:
+=================
+BULK[00001] >>> REQUEST PACKET 64 bytes
+BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
+BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
+
+General reply packet(s) are always used if not own reply defined.
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
+============================================================================
+|    00 | reply data (if any) from previous transaction
+|       | Just same reply packet as returned during previous transaction.
+|       | Needed only if reply is missed in previous transaction.
+|       | Just skip normally.
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
+============================================================================
+|    00 | reply data (if any)
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C WRITE REQUEST PACKET
+============================================================================
+|    00 | 0x31 I2C write command
+----------------------------------------------------------------------------
+|    01 | i2c address
+----------------------------------------------------------------------------
+|    02 | data length
+|       | 0x02 (for typical I2C reg / val pair)
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+| 04-   | data
+----------------------------------------------------------------------------
+|   -59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C READ REQUEST PACKET
+============================================================================
+|    00 | 0x33 I2C read command
+----------------------------------------------------------------------------
+|    01 | i2c address + 1
+----------------------------------------------------------------------------
+|    02 | register
+----------------------------------------------------------------------------
+|    03 | 0x00
+----------------------------------------------------------------------------
+|    04 | 0x00
+----------------------------------------------------------------------------
+|    05 | 0x01
+----------------------------------------------------------------------------
+| 06-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
+============================================================================
+|    00 | 0xb1 register write command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+|    04 | value
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
+============================================================================
+|    00 | 0xb0 register read command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | LED CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+|    01 | 0x01 (LED)
+----------------------------------------------------------------------------
+|    03 | 0x00 blink
+|       | 0x01 lights continuously
+----------------------------------------------------------------------------
+|    04 | blink interval
+|       | 0x00 fastest (looks like LED lights continuously)
+|       | 0xff slowest
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | IR CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+|    01 | 0x02 (IR)
+----------------------------------------------------------------------------
+|    03 | 0x00 IR disabled
+|       | 0x01 IR enabled
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | STREAMING CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x12 streaming control command
+----------------------------------------------------------------------------
+|    01 | 0x00 streaming disabled
+|       | 0x01 streaming enabled
+----------------------------------------------------------------------------
+|    02 | 0x00
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x41 remote control command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REPLY PACKET
+============================================================================
+|    00 | 0x00 code not received
+|       | 0x01 code received
+----------------------------------------------------------------------------
+|    01 | remote control code
+----------------------------------------------------------------------------
+| 02-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REQUEST PACKET
+============================================================================
+|    00 | 0x19 get hardware info command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REPLY PACKET
+============================================================================
+|    00 | hardware id
+----------------------------------------------------------------------------
+| 01-02 | firmware version
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | SMART CARD READER PACKET
+============================================================================
+|    00 | 0x34 smart card reader command
+----------------------------------------------------------------------------
+|    xx |
+----------------------------------------------------------------------------
+| xx-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+*/
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 34245d1b7dd9..e6b43fb3a148 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -14,6 +14,7 @@
 #define USB_VID_AFATECH				0x15a4
 #define USB_VID_ALCOR_MICRO			0x058f
 #define USB_VID_ALINK				0x05e3
+#define USB_VID_AMT				0x1c73
 #define USB_VID_ANCHOR				0x0547
 #define USB_VID_ANSONIC				0x10b9
 #define USB_VID_ANUBIS_ELECTRONIC		0x10fd
@@ -57,6 +58,7 @@
 #define USB_PID_AFATECH_AF9005				0x9020
 #define USB_VID_ALINK_DTU				0xf170
 #define USB_PID_ANSONIC_DVBT_USB			0x6000
+#define USB_PID_ANYSEE					0x861f
 #define USB_PID_AVERMEDIA_DVBT_USB_COLD			0x0001
 #define USB_PID_AVERMEDIA_DVBT_USB_WARM			0x0002
 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD		0xa800