Merge branch 'linus' into tracing/core

Merge reason: tracing/core was on an older, pre-rc1 base.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

45 files changed, 988 insertions, 117 deletions

diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index b6da9c3873fe..aa20ce8cc668 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -1096,8 +1096,19 @@ static int xc2028_set_params(struct dvb_frontend *fe,
 	}
 
 	/* All S-code tables need a 200kHz shift */
-	if (priv->ctrl.demod)
+	if (priv->ctrl.demod) {
 		demod = priv->ctrl.demod + 200;
+		/*
+		 * The DTV7 S-code table needs a 700 kHz shift.
+		 * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this
+		 *
+		 * DTV7 is only used in Australia.  Germany or Italy may also
+		 * use this firmware after initialization, but a tune to a UHF
+		 * channel should then cause DTV78 to be used.
+		 */
+		if (type & DTV7)
+			demod += 500;
+	}
 
 	return generic_set_freq(fe, p->frequency,
 				T_DIGITAL_TV, type, 0, demod);
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
index 4601b059b2b2..0e246eaad05a 100644
--- a/drivers/media/dvb/bt8xx/dst_ca.c
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/dvb/ca.h>
 #include "dvbdev.h"
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
index 79927305e84d..487919bea7ae 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ b/drivers/media/dvb/dvb-core/dvbdev.h
@@ -27,7 +27,6 @@
 #include <linux/poll.h>
 #include <linux/fs.h>
 #include <linux/list.h>
-#include <linux/smp_lock.h>
 
 #define DVB_MAJOR 212
 
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 68eb4493f991..d8d4214fd65f 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,5 +1,6 @@
 config TTPCI_EEPROM
 	tristate
+	depends on I2C
 	default n
 
 config DVB_AV7110
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index d1d959ed37b7..8d65c652ba50 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -36,7 +36,6 @@
 #include <linux/fs.h>
 #include <linux/timer.h>
 #include <linux/poll.h>
-#include <linux/smp_lock.h>
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index 837467f93805..575bf9d89419 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -58,6 +58,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 640421ceb24a..e85f318b4d2b 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -127,6 +127,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
@@ -1200,7 +1201,7 @@ static int si470x_fops_release(struct file *file)
 			video_unregister_device(radio->videodev);
 			kfree(radio->buffer);
 			kfree(radio);
-			goto done;
+			goto unlock;
 		}
 
 		/* stop rds reception */
@@ -1213,9 +1214,8 @@ static int si470x_fops_release(struct file *file)
 		retval = si470x_stop(radio);
 		usb_autopm_put_interface(radio->intf);
 	}
-
+unlock:
 	mutex_unlock(&radio->disconnect_lock);
-
 done:
 	return retval;
 }
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 061e147f6f26..84b6fc15519d 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -312,6 +312,14 @@ config VIDEO_OV7670
 	  OV7670 VGA camera.  It currently only works with the M88ALP01
 	  controller.
 
+config VIDEO_MT9V011
+	tristate "Micron mt9v011 sensor support"
+	depends on I2C && VIDEO_V4L2
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the Micron
+	  mt0v011 1.3 Mpixel camera.  It currently only works with the
+	  em28xx driver.
+
 config VIDEO_TCM825X
 	tristate "TCM825x camera sensor support"
 	depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 7fb3add1b387..9f2e3214a482 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
 obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o
 obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
 obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
+obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
 
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
 obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 5eb1464af670..d147d29bb0d3 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -41,6 +41,7 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/kdev_t.h>
 #include "bttvp.h"
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index c92a25036f0e..36f2d76006fd 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -198,11 +198,14 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = {
 
 static const struct cx18_card cx18_card_mpc718 = {
 	.type = CX18_CARD_YUAN_MPC718,
-	.name = "Yuan MPC718",
-	.comment = "Analog video capture works; some audio line in may not.\n",
+	.name = "Yuan MPC718 MiniPCI DVB-T/Analog",
+	.comment = "Experimenters needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
 	.hw_audio_ctrl = CX18_HW_418_AV,
-	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
 	.video_inputs = {
 		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
 		{ CX18_CARD_INPUT_SVIDEO1,    1,
@@ -211,27 +214,34 @@ static const struct cx18_card cx18_card_mpc718 = {
 		{ CX18_CARD_INPUT_SVIDEO2,    2,
 				CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
 		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
-		{ CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 },
 	},
 	.audio_inputs = {
 		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
-		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 0 },
-		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL1, 0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
 	},
-	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 },
 	.tuners = {
 		/* XC3028 tuner */
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
 	},
+	/* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
 	.ddr = {
-		/* Probably Samsung K4D263238G-VC33 memory */
-		.chip_config = 0x003,
-		.refresh = 0x30c,
-		.timing1 = 0x23230b73,
-		.timing2 = 0x08,
+		/* Hynix HY5DU283222B DDR RAM */
+		.chip_config = 0x303,
+		.refresh = 0x3bd,
+		.timing1 = 0x36320966,
+		.timing2 = 0x1f,
 		.tune_lane = 0,
 		.initial_emrs = 2,
 	},
+	.gpio_init.initial_value = 0x1,
+	.gpio_init.direction = 0x3,
+	/* FIXME - these GPIO's are just guesses */
+	.gpio_audio_input = { .mask   = 0x3,
+			      .tuner  = 0x1,
+			      .linein = 0x3,
+			      .radio  = 0x1 },
 	.xceive_pin = 0,
 	.pci_list = cx18_pci_mpc718,
 	.i2c = &cx18_i2c_std,
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 6ea3fe623ef4..51a0c33b25b7 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -30,6 +30,10 @@
 #include "s5h1409.h"
 #include "mxl5005s.h"
 #include "zl10353.h"
+
+#include <linux/firmware.h>
+#include "mt352.h"
+#include "mt352_priv.h"
 #include "tuner-xc2028.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -38,6 +42,11 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 #define CX18_CLOCK_ENABLE2		 0xc71024
 #define CX18_DMUX_CLK_MASK		 0x0080
 
+/*
+ * CX18_CARD_HVR_1600_ESMT
+ * CX18_CARD_HVR_1600_SAMSUNG
+ */
+
 static struct mxl5005s_config hauppauge_hvr1600_tuner = {
 	.i2c_address     = 0xC6 >> 1,
 	.if_freq         = IF_FREQ_5380000HZ,
@@ -65,6 +74,9 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
+/*
+ * CX18_CARD_LEADTEK_DVR3100H
+ */
 /* Information/confirmation of proper config values provided by Terry Wu */
 static struct zl10353_config leadtek_dvr3100h_demod = {
 	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
@@ -74,6 +86,121 @@ static struct zl10353_config leadtek_dvr3100h_demod = {
 	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
 };
 
+/*
+ * CX18_CARD_YUAN_MPC718
+ */
+/*
+ * Due to
+ *
+ * 1. an absence of information on how to prgram the MT352
+ * 2. the Linux mt352 module pushing MT352 initialzation off onto us here
+ *
+ * We have to use an init sequence that *you* must extract from the Windows
+ * driver (yuanrap.sys) and which we load as a firmware.
+ *
+ * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual
+ * with chip programming details, then I can remove this annoyance.
+ */
+static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
+				   const struct firmware **fw)
+{
+	struct cx18 *cx = stream->cx;
+	const char *fn = "dvb-cx18-mpc718-mt352.fw";
+	int ret;
+
+	ret = request_firmware(fw, fn, &cx->pci_dev->dev);
+	if (ret)
+		CX18_ERR("Unable to open firmware file %s\n", fn);
+	else {
+		size_t sz = (*fw)->size;
+		if (sz < 2 || sz > 64 || (sz % 2) != 0) {
+			CX18_ERR("Firmware %s has a bad size: %lu bytes\n",
+				 fn, (unsigned long) sz);
+			ret = -EILSEQ;
+			release_firmware(*fw);
+			*fw = NULL;
+		}
+	}
+
+	if (ret) {
+		CX18_ERR("The MPC718 board variant with the MT352 DVB-T"
+			  "demodualtor will not work without it\n");
+		CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware "
+			  "mpc718' if you need the firmware\n");
+	}
+	return ret;
+}
+
+static int yuan_mpc718_mt352_init(struct dvb_frontend *fe)
+{
+	struct cx18_dvb *dvb = container_of(fe->dvb,
+					    struct cx18_dvb, dvb_adapter);
+	struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb);
+	const struct firmware *fw = NULL;
+	int ret;
+	int i;
+	u8 buf[3];
+
+	ret = yuan_mpc718_mt352_reqfw(stream, &fw);
+	if (ret)
+		return ret;
+
+	/* Loop through all the register-value pairs in the firmware file */
+	for (i = 0; i < fw->size; i += 2) {
+		buf[0] = fw->data[i];
+		/* Intercept a few registers we want to set ourselves */
+		switch (buf[0]) {
+		case TRL_NOMINAL_RATE_0:
+			/* Set our custom OFDM bandwidth in the case below */
+			break;
+		case TRL_NOMINAL_RATE_1:
+			/* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */
+			/* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */
+			/* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */
+			buf[1] = 0x72;
+			buf[2] = 0x49;
+			mt352_write(fe, buf, 3);
+			break;
+		case INPUT_FREQ_0:
+			/* Set our custom IF in the case below */
+			break;
+		case INPUT_FREQ_1:
+			/* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */
+			buf[1] = 0x31;
+			buf[2] = 0xc0;
+			mt352_write(fe, buf, 3);
+			break;
+		default:
+			/* Pass through the register-value pair from the fw */
+			buf[1] = fw->data[i+1];
+			mt352_write(fe, buf, 2);
+			break;
+		}
+	}
+
+	buf[0] = (u8) TUNER_GO;
+	buf[1] = 0x01; /* Go */
+	mt352_write(fe, buf, 2);
+	release_firmware(fw);
+	return 0;
+}
+
+static struct mt352_config yuan_mpc718_mt352_demod = {
+	.demod_address = 0x1e >> 1,
+	.adc_clock     = 20480,     /* 20.480 MHz */
+	.if2           =  4560,     /*  4.560 MHz */
+	.no_tuner      = 1,         /* XC3028 is not behind the gate */
+	.demod_init    = yuan_mpc718_mt352_init,
+};
+
+static struct zl10353_config yuan_mpc718_zl10353_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
+};
+
 static int dvb_register(struct cx18_stream *stream);
 
 /* Kernel DVB framework calls this when the feed needs to start.
@@ -113,6 +240,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 		break;
 
 	case CX18_CARD_LEADTEK_DVR3100H:
+	case CX18_CARD_YUAN_MPC718:
 	default:
 		/* Assumption - Parallel transport - Signalling
 		 * undefined or default.
@@ -326,6 +454,38 @@ static int dvb_register(struct cx18_stream *stream)
 				fe->ops.tuner_ops.set_config(fe, &ctrl);
 		}
 		break;
+	case CX18_CARD_YUAN_MPC718:
+		/*
+		 * TODO
+		 * Apparently, these cards also could instead have a
+		 * DiBcom demod supported by one of the db7000 drivers
+		 */
+		dvb->fe = dvb_attach(mt352_attach,
+				     &yuan_mpc718_mt352_demod,
+				     &cx->i2c_adap[1]);
+		if (dvb->fe == NULL)
+			dvb->fe = dvb_attach(zl10353_attach,
+					     &yuan_mpc718_zl10353_demod,
+					     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
 	default:
 		/* No Digital Tv Support */
 		break;
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 2943bfd32a94..428f0c45e6b7 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -31,6 +31,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
+#include <linux/smp_lock.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 48a975134ac5..86ac529e62be 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -463,6 +463,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = {
 	.if_khz = 5380,
 };
 
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
+				    struct dvb_frontend_parameters *param)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+		switch (param->u.vsb.modulation) {
+		case VSB_8:
+			cx23885_gpio_clear(dev, GPIO_5);
+			break;
+		case QAM_64:
+		case QAM_256:
+		default:
+			cx23885_gpio_set(dev, GPIO_5);
+			break;
+		}
+		break;
+	}
+	return (port->set_frontend_save) ?
+		port->set_frontend_save(fe, param) : -ENODEV;
+}
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
@@ -502,6 +526,12 @@ static int dvb_register(struct cx23885_tsport *port)
 				   0x60, &dev->i2c_bus[1].i2c_adap,
 				   &hauppauge_hvr127x_config);
 		}
+
+		/* FIXME: temporary hack */
+		/* define bridge override to set_frontend */
+		port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
+		fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
+
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 		i2c_bus = &dev->i2c_bus[0];
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 70836af3ab48..5d6093336300 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -26,6 +26,7 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 1a2ac518a3f1..214a55e943b7 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -288,6 +288,10 @@ struct cx23885_tsport {
 	/* Allow a single tsport to have multiple frontends */
 	u32                        num_frontends;
 	void                       *port_priv;
+
+	/* FIXME: temporary hack */
+	int (*set_frontend_save) (struct dvb_frontend *,
+				  struct dvb_frontend_parameters *);
 };
 
 struct cx23885_dev {
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 44eacfb0d0d6..356d6896da3f 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
+#include <linux/smp_lock.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index b12770848c00..2bb54c3ef5cd 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -31,6 +31,7 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index ec2f45dde164..0664d111085f 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 16a5af30e9d1..6524b493e033 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -8,6 +8,8 @@ config VIDEO_EM28XX
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO
+
 	---help---
 	  This is a video4linux driver for Empia 28xx based TV cards.
 
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c43fdb9bc888..ebd24a25fb85 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -58,6 +58,8 @@ static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
 module_param_array(card,  int, NULL, 0444);
 MODULE_PARM_DESC(card,     "card type");
 
+#define MT9V011_VERSION                 0x8243
+
 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
 static unsigned long em28xx_devused;
 
@@ -191,6 +193,13 @@ static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
 	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
 	{	-1,		-1,	-1,		-1},
 };
+
+static struct em28xx_reg_seq silvercrest_reg_seq[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{EM28XX_R08_GPIO,	0x01,	0xf7,		10},
+	{	-1,		-1,	-1,		-1},
+};
+
 /*
  *  Board definitions
  */
@@ -438,6 +447,18 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
+	[EM2820_BOARD_SILVERCREST_WEBCAM] = {
+		.name         = "Silvercrest Webcam 1.3mpix",
+		.tuner_type   = TUNER_ABSENT,
+		.is_27xx      = 1,
+		.decoder      = EM28XX_MT9V011,
+		.input        = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = silvercrest_reg_seq,
+		} },
+	},
 	[EM2821_BOARD_SUPERCOMP_USB_2] = {
 		.name         = "Supercomp USB 2.0 TV",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
@@ -826,7 +847,7 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_gpio     = default_tuner_gpio,
 		.decoder        = EM28XX_TVP5150,
 		.has_dvb        = 1,
-		.dvb_gpio       = default_analog,
+		.dvb_gpio       = default_digital,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -1639,6 +1660,11 @@ static unsigned short tvp5150_addrs[] = {
 	I2C_CLIENT_END
 };
 
+static unsigned short mt9v011_addrs[] = {
+	0xba >> 1,
+	I2C_CLIENT_END
+};
+
 static unsigned short msp3400_addrs[] = {
 	0x80 >> 1,
 	0x88 >> 1,
@@ -1678,6 +1704,46 @@ static inline void em28xx_set_model(struct em28xx *dev)
 				       EM28XX_I2C_FREQ_100_KHZ;
 }
 
+/* HINT method: webcam I2C chips
+ *
+ * This method work for webcams with Micron sensors
+ */
+static int em28xx_hint_sensor(struct em28xx *dev)
+{
+	int rc;
+	char *sensor_name;
+	unsigned char cmd;
+	__be16 version_be;
+	u16 version;
+
+	if (dev->model != EM2820_BOARD_UNKNOWN)
+		return 0;
+
+	dev->i2c_client.addr = 0xba >> 1;
+	cmd = 0;
+	i2c_master_send(&dev->i2c_client, &cmd, 1);
+	rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
+	if (rc != 2)
+		return -EINVAL;
+
+	version = be16_to_cpu(version_be);
+
+	switch (version) {
+	case MT9V011_VERSION:
+		dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+		sensor_name = "mt9v011";
+		break;
+	default:
+		printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version));
+		return -EINVAL;
+	}
+
+	em28xx_errdev("Sensor is %s, assuming that webcam is %s\n",
+		      sensor_name, em28xx_boards[dev->model].name);
+
+	return 0;
+}
+
 /* Since em28xx_pre_card_setup() requires a proper dev->model,
  * this won't work for boards with generic PCI IDs
  */
@@ -1706,7 +1772,10 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 			em28xx_info("chip ID is em2750\n");
 			break;
 		case CHIP_ID_EM2820:
-			em28xx_info("chip ID is em2820\n");
+			if (dev->board.is_27xx)
+				em28xx_info("chip is em2710\n");
+			else
+				em28xx_info("chip ID is em2820\n");
 			break;
 		case CHIP_ID_EM2840:
 			em28xx_info("chip ID is em2840\n");
@@ -2158,6 +2227,10 @@ void em28xx_card_setup(struct em28xx *dev)
 		   before probing the i2c bus. */
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		break;
+	case EM2820_BOARD_SILVERCREST_WEBCAM:
+		/* FIXME: need to document the registers bellow */
+		em28xx_write_reg(dev, 0x0d, 0x42);
+		em28xx_write_reg(dev, 0x13, 0x08);
 	}
 
 	if (dev->board.has_snapshot_button)
@@ -2189,6 +2262,10 @@ void em28xx_card_setup(struct em28xx *dev)
 		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 			"tvp5150", "tvp5150", tvp5150_addrs);
 
+	if (dev->board.decoder == EM28XX_MT9V011)
+		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"mt9v011", "mt9v011", mt9v011_addrs);
+
 	if (dev->board.adecoder == EM28XX_TVAUDIO)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 			"tvaudio", "tvaudio", dev->board.tvaudio_addr);
@@ -2333,6 +2410,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		return errCode;
 	}
 
+	em28xx_hint_sensor(dev);
+
 	/* Do board specific init and eeprom reading */
 	em28xx_card_setup(dev);
 
@@ -2573,6 +2652,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	retval = em28xx_init_dev(&dev, udev, interface, nr);
 	if (retval) {
 		em28xx_devused &= ~(1<<dev->devno);
+		mutex_unlock(&dev->lock);
 		kfree(dev);
 		goto err;
 	}
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index c8d7ce8fbd36..079ab4d563a6 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -648,17 +648,28 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 int em28xx_set_outfmt(struct em28xx *dev)
 {
 	int ret;
+	int vinmode, vinctl, outfmt;
+
+	outfmt  = dev->format->reg;
+
+	if (dev->board.is_27xx) {
+		vinmode = 0x0d;
+		vinctl  = 0x00;
+	} else {
+		vinmode = 0x10;
+		vinctl  = 0x11;
+	}
 
 	ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
-				    dev->format->reg | 0x20, 0x3f);
+				outfmt | 0x20, 0xff);
 	if (ret < 0)
-		return ret;
+			return ret;
 
-	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10);
+	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode);
 	if (ret < 0)
 		return ret;
 
-	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11);
+	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl);
 }
 
 static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -695,13 +706,19 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
 {
 	u8 mode;
 	/* the em2800 scaler only supports scaling down to 50% */
-	if (dev->board.is_em2800)
+
+	if (dev->board.is_27xx) {
+		/* FIXME: Don't use the scaler yet */
+		mode = 0;
+	} else if (dev->board.is_em2800) {
 		mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
-	else {
+	} else {
 		u8 buf[2];
+
 		buf[0] = h;
 		buf[1] = h >> 8;
 		em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
+
 		buf[0] = v;
 		buf[1] = v >> 8;
 		em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
@@ -720,8 +737,11 @@ int em28xx_resolution_set(struct em28xx *dev)
 	height = norm_maxh(dev) >> 1;
 
 	em28xx_set_outfmt(dev);
+
+
 	em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
 	em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+
 	return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
 }
 
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index e7b47c8da8f3..3da97c32b8fa 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -243,6 +243,14 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
+static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner = 1,
+	.disable_i2c_gate_ctrl = 1,
+	.parallel_ts = 1,
+	.if2 = 45600,
+};
+
 #ifdef EM28XX_DRX397XD_SUPPORT
 /* [TODO] djh - not sure yet what the device config needs to contain */
 static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
@@ -433,7 +441,6 @@ static int dvb_init(struct em28xx *dev)
 		}
 		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
-	case EM2880_BOARD_TERRATEC_HYBRID_XS:
 	case EM2880_BOARD_KWORLD_DVB_310U:
 	case EM2880_BOARD_EMPIRE_DUAL_TV:
 		dvb->frontend = dvb_attach(zl10353_attach,
@@ -444,6 +451,25 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM2880_BOARD_TERRATEC_HYBRID_XS:
+		dvb->frontend = dvb_attach(zl10353_attach,
+					   &em28xx_terratec_xs_zl10353_xc3028,
+					   &dev->i2c_adap);
+		if (dvb->frontend == NULL) {
+			/* This board could have either a zl10353 or a mt352.
+			   If the chip id isn't for zl10353, try mt352 */
+
+			/* FIXME: make support for mt352 work */
+			printk(KERN_ERR "version of this board with mt352 not "
+			       "currently supported\n");
+			result = -EINVAL;
+			goto out_free;
+		}
+		if (attach_xc3028(0x61, dev) < 0) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		break;
 	case EM2883_BOARD_KWORLD_HYBRID_330U:
 	case EM2882_BOARD_EVGA_INDTUBE:
 		dvb->frontend = dvb_attach(s5h1409_attach,
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 2c86fcf089f5..27e33a287dfc 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -483,7 +483,7 @@ static char *i2c_devs[128] = {
 	[0xa0 >> 1] = "eeprom",
 	[0xb0 >> 1] = "tda9874",
 	[0xb8 >> 1] = "tvp5150a",
-	[0xba >> 1] = "tvp5150a",
+	[0xba >> 1] = "webcam sensor or tvp5150a",
 	[0xc0 >> 1] = "tuner (analog)",
 	[0xc2 >> 1] = "tuner (analog)",
 	[0xc4 >> 1] = "tuner (analog)",
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8fe1beecfffa..14316c912179 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -90,10 +90,35 @@ MODULE_PARM_DESC(video_debug, "enable debug messages [video]");
 /* supported video standards */
 static struct em28xx_fmt format[] = {
 	{
-		.name     = "16bpp YUY2, 4:2:2, packed",
+		.name     = "16 bpp YUY2, 4:2:2, packed",
 		.fourcc   = V4L2_PIX_FMT_YUYV,
 		.depth    = 16,
 		.reg	  = EM28XX_OUTFMT_YUV422_Y0UY1V,
+	}, {
+		.name     = "16 bpp RGB 565, LE",
+		.fourcc   = V4L2_PIX_FMT_RGB565,
+		.depth    = 16,
+		.reg      = EM28XX_OUTFMT_RGB_16_656,
+	}, {
+		.name     = "8 bpp Bayer BGBG..GRGR",
+		.fourcc   = V4L2_PIX_FMT_SBGGR8,
+		.depth    = 8,
+		.reg      = EM28XX_OUTFMT_RGB_8_BGBG,
+	}, {
+		.name     = "8 bpp Bayer GRGR..BGBG",
+		.fourcc   = V4L2_PIX_FMT_SGRBG8,
+		.depth    = 8,
+		.reg      = EM28XX_OUTFMT_RGB_8_GRGR,
+	}, {
+		.name     = "8 bpp Bayer GBGB..RGRG",
+		.fourcc   = V4L2_PIX_FMT_SGBRG8,
+		.depth    = 8,
+		.reg      = EM28XX_OUTFMT_RGB_8_GBGB,
+	}, {
+		.name     = "12 bpp YUV411",
+		.fourcc   = V4L2_PIX_FMT_YUV411P,
+		.depth    = 12,
+		.reg      = EM28XX_OUTFMT_YUV411,
 	},
 };
 
@@ -701,7 +726,11 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 		return -EINVAL;
 	}
 
-	if (dev->board.is_em2800) {
+	if (dev->board.is_27xx) {
+		/* FIXME: This is the only supported fmt */
+		width  = 640;
+		height = 480;
+	} else if (dev->board.is_em2800) {
 		/* the em2800 can only scale down to 50% */
 		height = height > (3 * maxh / 4) ? maxh : maxh / 2;
 		width = width > (3 * maxw / 4) ? maxw : maxw / 2;
@@ -733,13 +762,40 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
+static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
+				   unsigned width, unsigned height)
+{
+	struct em28xx_fmt     *fmt;
+
+	/* FIXME: This is the only supported fmt */
+	if (dev->board.is_27xx) {
+		width  = 640;
+		height = 480;
+	}
+
+	fmt = format_by_fourcc(fourcc);
+	if (!fmt)
+		return -EINVAL;
+
+	dev->format = fmt;
+	dev->width  = width;
+	dev->height = height;
+
+	/* set new image size */
+	get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
+
+	em28xx_set_alternate(dev);
+	em28xx_resolution_set(dev);
+
+	return 0;
+}
+
 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 			struct v4l2_format *f)
 {
 	struct em28xx_fh      *fh  = priv;
 	struct em28xx         *dev = fh->dev;
 	int                   rc;
-	struct em28xx_fmt     *fmt;
 
 	rc = check_dev(dev);
 	if (rc < 0)
@@ -749,12 +805,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 
 	vidioc_try_fmt_vid_cap(file, priv, f);
 
-	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	if (!fmt) {
-		rc = -EINVAL;
-		goto out;
-	}
-
 	if (videobuf_queue_is_busy(&fh->vb_vidq)) {
 		em28xx_errdev("%s queue busy\n", __func__);
 		rc = -EBUSY;
@@ -767,16 +817,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 		goto out;
 	}
 
-	/* set new image size */
-	dev->width = f->fmt.pix.width;
-	dev->height = f->fmt.pix.height;
-	dev->format = fmt;
-	get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
-
-	em28xx_set_alternate(dev);
-	em28xx_resolution_set(dev);
-
-	rc = 0;
+	rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat,
+				f->fmt.pix.width, f->fmt.pix.height);
 
 out:
 	mutex_unlock(&dev->lock);
@@ -1616,11 +1658,6 @@ static int em28xx_v4l2_open(struct file *filp)
 	filp->private_data = fh;
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
-		dev->width = norm_maxw(dev);
-		dev->height = norm_maxh(dev);
-		dev->hscale = 0;
-		dev->vscale = 0;
-
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		em28xx_set_alternate(dev);
 		em28xx_resolution_set(dev);
@@ -1962,15 +1999,14 @@ int em28xx_register_analog_devices(struct em28xx *dev)
 
 	/* set default norm */
 	dev->norm = em28xx_video_template.current_norm;
-	dev->width = norm_maxw(dev);
-	dev->height = norm_maxh(dev);
 	dev->interlaced = EM28XX_INTERLACED_DEFAULT;
-	dev->hscale = 0;
-	dev->vscale = 0;
 	dev->ctl_input = 0;
 
 	/* Analog specific initialization */
 	dev->format = &format[0];
+	em28xx_set_video_format(dev, format[0].fourcc,
+				norm_maxw(dev), norm_maxh(dev));
+
 	video_mux(dev, dev->ctl_input);
 
 	/* Audio defaults */
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 813ce45c2f99..d90fef463764 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -107,6 +107,7 @@
 #define EM2860_BOARD_TERRATEC_AV350		  68
 #define EM2882_BOARD_KWORLD_ATSC_315U		  69
 #define EM2882_BOARD_EVGA_INDTUBE		  70
+#define EM2820_BOARD_SILVERCREST_WEBCAM           71
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
@@ -360,6 +361,7 @@ enum em28xx_decoder {
 	EM28XX_NODECODER,
 	EM28XX_TVP5150,
 	EM28XX_SAA711X,
+	EM28XX_MT9V011,
 };
 
 enum em28xx_adecoder {
@@ -388,6 +390,7 @@ struct em28xx_board {
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
 	unsigned int has_snapshot_button:1;
+	unsigned int is_27xx:1;
 	unsigned int valid:1;
 
 	unsigned char xclk, i2c_speed;
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index 9df7137fe67e..992ce530f138 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -36,10 +36,6 @@
 
 #define STV_ISOC_ENDPOINT_ADDR		0x81
 
-#ifndef V4L2_PIX_FMT_SGRBG8
-#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G')
-#endif
-
 #define STV_REG23 			0x0423
 
 /* Control registers of the STV0600 ASIC */
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
new file mode 100644
index 000000000000..1fe8fc9183a7
--- /dev/null
+++ b/drivers/media/video/mt9v011.c
@@ -0,0 +1,431 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <media/v4l2-device.h>
+#include "mt9v011.h"
+#include <media/v4l2-i2c-drv.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
+
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* supported controls */
+static struct v4l2_queryctrl mt9v011_qctrl[] = {
+	{
+		.id = V4L2_CID_GAIN,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Gain",
+		.minimum = 0,
+		.maximum = (1 << 10) - 1,
+		.step = 1,
+		.default_value = 0x0020,
+		.flags = 0,
+	}, {
+		.id = V4L2_CID_RED_BALANCE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Red Balance",
+		.minimum = -1 << 9,
+		.maximum = (1 << 9) - 1,
+		.step = 1,
+		.default_value = 0,
+		.flags = 0,
+	}, {
+		.id = V4L2_CID_BLUE_BALANCE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Blue Balance",
+		.minimum = -1 << 9,
+		.maximum = (1 << 9) - 1,
+		.step = 1,
+		.default_value = 0,
+		.flags = 0,
+	},
+};
+
+struct mt9v011 {
+	struct v4l2_subdev sd;
+	unsigned width, height;
+
+	u16 global_gain, red_bal, blue_bal;
+};
+
+static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct mt9v011, sd);
+}
+
+static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(sd);
+	__be16 buffer;
+	int rc, val;
+
+	rc = i2c_master_send(c, &addr, 1);
+	if (rc != 1)
+		v4l2_dbg(0, debug, sd,
+			 "i2c i/o error: rc == %d (should be 1)\n", rc);
+
+	msleep(10);
+
+	rc = i2c_master_recv(c, (char *)&buffer, 2);
+	if (rc != 2)
+		v4l2_dbg(0, debug, sd,
+			 "i2c i/o error: rc == %d (should be 2)\n", rc);
+
+	val = be16_to_cpu(buffer);
+
+	v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val);
+
+	return val;
+}
+
+static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr,
+				 u16 value)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(sd);
+	unsigned char buffer[3];
+	int rc;
+
+	buffer[0] = addr;
+	buffer[1] = value >> 8;
+	buffer[2] = value & 0xff;
+
+	v4l2_dbg(2, debug, sd,
+		 "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value);
+	rc = i2c_master_send(c, buffer, 3);
+	if (rc != 3)
+		v4l2_dbg(0, debug, sd,
+			 "i2c i/o error: rc == %d (should be 3)\n", rc);
+}
+
+
+struct i2c_reg_value {
+	unsigned char reg;
+	u16           value;
+};
+
+/*
+ * Values used at the original driver
+ * Some values are marked as Reserved at the datasheet
+ */
+static const struct i2c_reg_value mt9v011_init_default[] = {
+		{ R0D_MT9V011_RESET, 0x0001 },
+		{ R0D_MT9V011_RESET, 0x0000 },
+
+		{ R0C_MT9V011_SHUTTER_DELAY, 0x0000 },
+		{ R09_MT9V011_SHUTTER_WIDTH, 0x1fc },
+
+		{ R0A_MT9V011_CLK_SPEED, 0x0000 },
+		{ R1E_MT9V011_DIGITAL_ZOOM,  0x0000 },
+		{ R20_MT9V011_READ_MODE, 0x1000 },
+
+		{ R07_MT9V011_OUT_CTRL, 0x000a },	/* chip enable */
+};
+
+static void set_balance(struct v4l2_subdev *sd)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	u16 green1_gain, green2_gain, blue_gain, red_gain;
+
+	green1_gain = core->global_gain;
+	green2_gain = core->global_gain;
+
+	blue_gain = core->global_gain +
+		    core->global_gain * core->blue_bal / (1 << 9);
+
+	red_gain = core->global_gain +
+		   core->global_gain * core->blue_bal / (1 << 9);
+
+	mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain);
+	mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN,  green1_gain);
+	mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
+	mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
+}
+
+static void set_res(struct v4l2_subdev *sd)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned vstart, hstart;
+
+	/*
+	 * The mt9v011 doesn't have scaling. So, in order to select the desired
+	 * resolution, we're cropping at the middle of the sensor.
+	 * hblank and vblank should be adjusted, in order to warrant that
+	 * we'll preserve the line timings for 30 fps, no matter what resolution
+	 * is selected.
+	 * NOTE: datasheet says that width (and height) should be filled with
+	 * width-1. However, this doesn't work, since one pixel per line will
+	 * be missing.
+	 */
+
+	hstart = 14 + (640 - core->width) / 2;
+	mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
+	mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
+	mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
+
+	vstart = 8 + (640 - core->height) / 2;
+	mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
+	mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
+	mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
+};
+
+static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++)
+		mt9v011_write(sd, mt9v011_init_default[i].reg,
+			       mt9v011_init_default[i].value);
+
+	set_balance(sd);
+	set_res(sd);
+
+	return 0;
+};
+
+static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+
+	v4l2_dbg(1, debug, sd, "g_ctrl called\n");
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		ctrl->value = core->global_gain;
+		return 0;
+	case V4L2_CID_RED_BALANCE:
+		ctrl->value = core->red_bal;
+		return 0;
+	case V4L2_CID_BLUE_BALANCE:
+		ctrl->value = core->blue_bal;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	u8 i, n;
+	n = ARRAY_SIZE(mt9v011_qctrl);
+
+	for (i = 0; i < n; i++) {
+		if (ctrl->id != mt9v011_qctrl[i].id)
+			continue;
+		if (ctrl->value < mt9v011_qctrl[i].minimum ||
+		    ctrl->value > mt9v011_qctrl[i].maximum)
+			return -ERANGE;
+		v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n",
+					ctrl->id, ctrl->value);
+		break;
+	}
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		core->global_gain = ctrl->value;
+		break;
+	case V4L2_CID_RED_BALANCE:
+		core->red_bal = ctrl->value;
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		core->blue_bal = ctrl->value;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	set_balance(sd);
+
+	return 0;
+}
+
+static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
+{
+	if (fmt->index > 0)
+		return -EINVAL;
+
+	fmt->flags = 0;
+	strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG");
+	fmt->pixelformat = V4L2_PIX_FMT_SGRBG8;
+
+	return 0;
+}
+
+static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8)
+		return -EINVAL;
+
+	v4l_bound_align_image(&pix->width, 48, 639, 1,
+			      &pix->height, 32, 480, 1, 0);
+
+	return 0;
+}
+
+static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	struct mt9v011 *core = to_mt9v011(sd);
+	int rc;
+
+	rc = mt9v011_try_fmt(sd, fmt);
+	if (rc < 0)
+		return -EINVAL;
+
+	core->width = pix->width;
+	core->height = pix->height;
+
+	set_res(sd);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int mt9v011_g_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (!v4l2_chip_match_i2c_client(client, &reg->match))
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	reg->val = mt9v011_read(sd, reg->reg & 0xff);
+	reg->size = 2;
+
+	return 0;
+}
+
+static int mt9v011_s_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (!v4l2_chip_match_i2c_client(client, &reg->match))
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff);
+
+	return 0;
+}
+#endif
+
+static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
+				struct v4l2_dbg_chip_ident *chip)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
+					  MT9V011_VERSION);
+}
+
+static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
+	.g_ctrl = mt9v011_g_ctrl,
+	.s_ctrl = mt9v011_s_ctrl,
+	.reset = mt9v011_reset,
+	.g_chip_ident = mt9v011_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = mt9v011_g_register,
+	.s_register = mt9v011_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
+	.enum_fmt = mt9v011_enum_fmt,
+	.try_fmt = mt9v011_try_fmt,
+	.s_fmt = mt9v011_s_fmt,
+};
+
+static const struct v4l2_subdev_ops mt9v011_ops = {
+	.core  = &mt9v011_core_ops,
+	.video = &mt9v011_video_ops,
+};
+
+
+/****************************************************************************
+			I2C Client & Driver
+ ****************************************************************************/
+
+static int mt9v011_probe(struct i2c_client *c,
+			 const struct i2c_device_id *id)
+{
+	u16 version;
+	struct mt9v011 *core;
+	struct v4l2_subdev *sd;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(c->adapter,
+	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+		return -EIO;
+
+	core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL);
+	if (!core)
+		return -ENOMEM;
+
+	sd = &core->sd;
+	v4l2_i2c_subdev_init(sd, c, &mt9v011_ops);
+
+	/* Check if the sensor is really a MT9V011 */
+	version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+	if (version != MT9V011_VERSION) {
+		v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n",
+			  version);
+		kfree(core);
+		return -EINVAL;
+	}
+
+	core->global_gain = 0x0024;
+	core->width  = 640;
+	core->height = 480;
+
+	v4l_info(c, "chip found @ 0x%02x (%s)\n",
+		 c->addr << 1, c->adapter->name);
+
+	return 0;
+}
+
+static int mt9v011_remove(struct i2c_client *c)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(c);
+
+	v4l2_dbg(1, debug, sd,
+		"mt9v011.c: removing mt9v011 adapter on address 0x%x\n",
+		c->addr << 1);
+
+	v4l2_device_unregister_subdev(sd);
+	kfree(to_mt9v011(sd));
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_device_id mt9v011_id[] = {
+	{ "mt9v011", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mt9v011_id);
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+	.name = "mt9v011",
+	.probe = mt9v011_probe,
+	.remove = mt9v011_remove,
+	.id_table = mt9v011_id,
+};
diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h
new file mode 100644
index 000000000000..9e443ee30558
--- /dev/null
+++ b/drivers/media/video/mt9v011.h
@@ -0,0 +1,35 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#ifndef MT9V011_H_
+#define MT9V011_H_
+
+#define R00_MT9V011_CHIP_VERSION	0x00
+#define R01_MT9V011_ROWSTART		0x01
+#define R02_MT9V011_COLSTART		0x02
+#define R03_MT9V011_HEIGHT		0x03
+#define R04_MT9V011_WIDTH		0x04
+#define R05_MT9V011_HBLANK		0x05
+#define R06_MT9V011_VBLANK		0x06
+#define R07_MT9V011_OUT_CTRL		0x07
+#define R09_MT9V011_SHUTTER_WIDTH	0x09
+#define R0A_MT9V011_CLK_SPEED		0x0a
+#define R0B_MT9V011_RESTART		0x0b
+#define R0C_MT9V011_SHUTTER_DELAY	0x0c
+#define R0D_MT9V011_RESET		0x0d
+#define R1E_MT9V011_DIGITAL_ZOOM	0x1e
+#define R20_MT9V011_READ_MODE		0x20
+#define R2B_MT9V011_GREEN_1_GAIN	0x2b
+#define R2C_MT9V011_BLUE_GAIN		0x2c
+#define R2D_MT9V011_RED_GAIN		0x2d
+#define R2E_MT9V011_GREEN_2_GAIN	0x2e
+#define R35_MT9V011_GLOBAL_GAIN		0x35
+#define RF1_MT9V011_CHIP_ENABLE		0xf1
+
+#define MT9V011_VERSION			0x8243
+
+#endif
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index db25c3034c11..8d17cf613306 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -62,6 +62,7 @@
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 #include <linux/usb/input.h>
 #endif
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 0be6f814f539..0b658dee05a4 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -29,7 +29,6 @@
 #include <linux/usb.h>
 #include <linux/spinlock.h>
 #include <linux/wait.h>
-#include <linux/smp_lock.h>
 #include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/mm.h>
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 6be845ccc7d7..9e3262c0ba37 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -48,6 +48,7 @@
 #include <linux/videodev2.h>
 #include <linux/version.h>
 #include <linux/mm.h>
+#include <linux/smp_lock.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index 155804b061e9..b624a4c01fdc 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -43,7 +43,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/videotext.h>
 #include <linux/videodev2.h>
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index 271d6e931b75..12835fb82c95 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -46,7 +46,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/videotext.h>
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index add1757f8930..296788c3bf0e 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 
 #include "saa7134-reg.h"
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index c8f05297d0f0..85ffc2cba039 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -31,6 +31,7 @@ static const char version[] = "0.24";
 #include <linux/init.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/usb.h>
 #include "se401.h"
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 16f595d4337a..9f5ae8167855 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -237,11 +237,11 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 		return -ENOMEM;
 
 	icd->num_user_formats = fmts;
-	fmts = 0;
 
 	dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts);
 
 	/* Second pass - actually fill data formats */
+	fmts = 0;
 	for (i = 0; i < icd->num_formats; i++)
 		if (!ici->ops->get_formats) {
 			icd->user_formats[i].host_fmt = icd->formats + i;
@@ -877,8 +877,11 @@ static int soc_camera_probe(struct device *dev)
 			(unsigned short)~0;
 
 		ret = soc_camera_init_user_formats(icd);
-		if (ret < 0)
+		if (ret < 0) {
+			if (icd->ops->remove)
+				icd->ops->remove(icd);
 			goto eiufmt;
+		}
 
 		icd->height	= DEFAULT_HEIGHT;
 		icd->width	= DEFAULT_WIDTH;
@@ -902,8 +905,10 @@ static int soc_camera_remove(struct device *dev)
 {
 	struct soc_camera_device *icd = to_soc_camera_dev(dev);
 
+	mutex_lock(&icd->video_lock);
 	if (icd->ops->remove)
 		icd->ops->remove(icd);
+	mutex_unlock(&icd->video_lock);
 
 	soc_camera_free_user_formats(icd);
 
@@ -1145,6 +1150,7 @@ evidallocd:
 }
 EXPORT_SYMBOL(soc_camera_video_start);
 
+/* Called from client .remove() methods with .video_lock held */
 void soc_camera_video_stop(struct soc_camera_device *icd)
 {
 	struct video_device *vdev = icd->vdev;
@@ -1154,10 +1160,8 @@ void soc_camera_video_stop(struct soc_camera_device *icd)
 	if (!icd->dev.parent || !vdev)
 		return;
 
-	mutex_lock(&icd->video_lock);
 	video_unregister_device(vdev);
 	icd->vdev = NULL;
-	mutex_unlock(&icd->video_lock);
 }
 EXPORT_SYMBOL(soc_camera_video_stop);
 
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 2e5937047278..4d6785e63455 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 
 #include <linux/usb.h>
 #include <linux/mm.h>
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 0eb313082c97..eaada39c76fd 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/poll.h>
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 75f286f7a2e9..8b4e7dafce7b 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -62,6 +62,7 @@
 #include <linux/init.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/errno.h>
 #include <linux/videodev.h>
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 8d73979596f9..45fce39ec9ad 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -43,6 +43,7 @@
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 90b58914f984..90d9b5c0e9a7 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -50,6 +50,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/utsname.h>
 #include <linux/highmem.h>
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 31eac66411d7..a7f1b69a7dab 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/kmod.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index cd7266858462..7705fc6baf00 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -343,6 +343,53 @@ static struct bar_std bars[] = {
 #define TO_U(r, g, b) \
 	(((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128)
 
+/* precalculate color bar values to speed up rendering */
+static void precalculate_bars(struct vivi_fh *fh)
+{
+	struct vivi_dev *dev = fh->dev;
+	unsigned char r, g, b;
+	int k, is_yuv;
+
+	fh->input = dev->input;
+
+	for (k = 0; k < 8; k++) {
+		r = bars[fh->input].bar[k][0];
+		g = bars[fh->input].bar[k][1];
+		b = bars[fh->input].bar[k][2];
+		is_yuv = 0;
+
+		switch (fh->fmt->fourcc) {
+		case V4L2_PIX_FMT_YUYV:
+		case V4L2_PIX_FMT_UYVY:
+			is_yuv = 1;
+			break;
+		case V4L2_PIX_FMT_RGB565:
+		case V4L2_PIX_FMT_RGB565X:
+			r >>= 3;
+			g >>= 2;
+			b >>= 3;
+			break;
+		case V4L2_PIX_FMT_RGB555:
+		case V4L2_PIX_FMT_RGB555X:
+			r >>= 3;
+			g >>= 3;
+			b >>= 3;
+			break;
+		}
+
+		if (is_yuv) {
+			fh->bars[k][0] = TO_Y(r, g, b);	/* Luma */
+			fh->bars[k][1] = TO_U(r, g, b);	/* Cb */
+			fh->bars[k][2] = TO_V(r, g, b);	/* Cr */
+		} else {
+			fh->bars[k][0] = r;
+			fh->bars[k][1] = g;
+			fh->bars[k][2] = b;
+		}
+	}
+
+}
+
 #define TSTAMP_MIN_Y	24
 #define TSTAMP_MAX_Y	(TSTAMP_MIN_Y + 15)
 #define TSTAMP_INPUT_X	10
@@ -755,6 +802,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
 	buf->vb.height = fh->height;
 	buf->vb.field  = field;
 
+	precalculate_bars(fh);
+
 	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
 		rc = videobuf_iolock(vq, &buf->vb, NULL);
 		if (rc < 0)
@@ -893,53 +942,6 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
-/* precalculate color bar values to speed up rendering */
-static void precalculate_bars(struct vivi_fh *fh)
-{
-	struct vivi_dev *dev = fh->dev;
-	unsigned char r, g, b;
-	int k, is_yuv;
-
-	fh->input = dev->input;
-
-	for (k = 0; k < 8; k++) {
-		r = bars[fh->input].bar[k][0];
-		g = bars[fh->input].bar[k][1];
-		b = bars[fh->input].bar[k][2];
-		is_yuv = 0;
-
-		switch (fh->fmt->fourcc) {
-		case V4L2_PIX_FMT_YUYV:
-		case V4L2_PIX_FMT_UYVY:
-			is_yuv = 1;
-			break;
-		case V4L2_PIX_FMT_RGB565:
-		case V4L2_PIX_FMT_RGB565X:
-			r >>= 3;
-			g >>= 2;
-			b >>= 3;
-			break;
-		case V4L2_PIX_FMT_RGB555:
-		case V4L2_PIX_FMT_RGB555X:
-			r >>= 3;
-			g >>= 3;
-			b >>= 3;
-			break;
-		}
-
-		if (is_yuv) {
-			fh->bars[k][0] = TO_Y(r, g, b);	/* Luma */
-			fh->bars[k][1] = TO_U(r, g, b);	/* Cb */
-			fh->bars[k][2] = TO_V(r, g, b);	/* Cr */
-		} else {
-			fh->bars[k][0] = r;
-			fh->bars[k][1] = g;
-			fh->bars[k][2] = b;
-		}
-	}
-
-}
-
 /*FIXME: This seems to be generic enough to be at videodev2 */
 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 					struct v4l2_format *f)
@@ -965,8 +967,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	fh->vb_vidq.field = f->fmt.pix.field;
 	fh->type          = f->type;
 
-	precalculate_bars(fh);
-
 	ret = 0;
 out:
 	mutex_unlock(&q->vb_lock);
@@ -1357,6 +1357,7 @@ static int __init vivi_create_instance(int inst)
 		goto unreg_dev;
 
 	*vfd = vivi_template;
+	vfd->debug = debug;
 
 	ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
 	if (ret < 0)
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 3d7df32a3d87..bcdefb1bcb3d 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -49,6 +49,7 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>