summaryrefslogtreecommitdiff
path: root/drivers/mmc/host
diff options
context:
space:
mode:
authorMagnus Damm <damm+renesas@opensource.se>2016-02-16 13:06:41 +0900
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-04-12 09:09:01 -0700
commit0a060276f0f429bb0402e7fa6581d472934300fb (patch)
treefcdd792e81eaed92b3ef3fd46bd7d79b19e3b6fc /drivers/mmc/host
parentd69bc6d28c9662bde7230d88e405c8694d05d94c (diff)
mmc: mmc_spi: Add Card Detect comments and fix CD GPIO case
commit bcdc9f260bdce09913db1464be9817170d51044a upstream. This patch fixes the MMC SPI driver from doing polling card detect when a CD GPIO that supports interrupts is specified using the gpios DT property. Without this patch the DT node below results in the following output: spi_gpio: spi-gpio { /* SD2 @ CN12 */ compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; gpio-sck = <&gpio6 16 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio6 17 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio6 18 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; status = "okay"; spi@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3200 3400>; spi-max-frequency = <25000000>; gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; /* CD */ }; }; # dmesg | grep mmc mmc_spi spi32766.0: SD/MMC host mmc0, no WP, no poweroff, cd polling mmc0: host does not support reading read-only switch, assuming write-enable mmc0: new SDHC card on SPI mmcblk0: mmc0:0000 SU04G 3.69 GiB mmcblk0: p1 With this patch applied the "cd polling" portion above disappears. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/mmc_spi.c6
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 1c1b45ef3faf..aad3243a48fc 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1436,6 +1436,12 @@ static int mmc_spi_probe(struct spi_device *spi)
host->pdata->cd_debounce);
if (status != 0)
goto fail_add_host;
+
+ /* The platform has a CD GPIO signal that may support
+ * interrupts, so let mmc_gpiod_request_cd_irq() decide
+ * if polling is needed or not.
+ */
+ mmc->caps &= ~MMC_CAP_NEEDS_POLL;
mmc_gpiod_request_cd_irq(mmc);
}