[MTD] Remove references to TI 'toto' platform.

This was a reference board for which support never got merged upstream.
Kill it off, at rmk's suggestion.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

3 files changed, 0 insertions, 141 deletions

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index db667b16c043..3ae76ecc07d7 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -434,13 +434,6 @@ config MTD_CEIVA
 	  PhotoMax Digital Picture Frame.
 	  If you have such a device, say 'Y'.
 
-config MTD_NOR_TOTO
-	tristate "NOR Flash device on TOTO board"
-	depends on ARCH_OMAP && OMAP_TOTO
-	help
-	  This enables access to the NOR flash on the Texas Instruments
-	  TOTO board.
-
 config MTD_H720X
 	tristate "Hynix evaluation board mappings"
 	depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index b2582506cde9..6d9ba35caf11 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_MTD_NETtel)	+= nettel.o
 obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
 obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
 obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
-obj-$(CONFIG_MTD_NOR_TOTO)	+= omap-toto-flash.o
 obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
 obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
 obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
deleted file mode 100644
index 0a60ebbc2175..000000000000
--- a/drivers/mtd/maps/omap-toto-flash.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * NOR Flash memory access on TI Toto board
- *
- * jzhang@ti.com (C) 2003 Texas Instruments.
- *
- *  (C) 2002 MontVista Software, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-
-#ifndef CONFIG_ARCH_OMAP
-#error This is for OMAP architecture only
-#endif
-
-//these lines need be moved to a hardware header file
-#define OMAP_TOTO_FLASH_BASE 0xd8000000
-#define OMAP_TOTO_FLASH_SIZE 0x80000
-
-static struct map_info omap_toto_map_flash = {
-	.name =		"OMAP Toto flash",
-	.bankwidth =	2,
-	.virt =		(void __iomem *)OMAP_TOTO_FLASH_BASE,
-};
-
-
-static struct mtd_partition toto_flash_partitions[] = {
-	{
-		.name =		"BootLoader",
-		.size =		0x00040000,     /* hopefully u-boot will stay 128k + 128*/
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name =		"ReservedSpace",
-		.size =		0x00030000,
-		.offset =	MTDPART_OFS_APPEND,
-		//mask_flags:	MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name =		"EnvArea",      /* bottom 64KiB for env vars */
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	MTDPART_OFS_APPEND,
-	}
-};
-
-static struct mtd_partition *parsed_parts;
-
-static struct mtd_info *flash_mtd;
-
-static int __init init_flash (void)
-{
-
-	struct mtd_partition *parts;
-	int nb_parts = 0;
-	int parsed_nr_parts = 0;
-	const char *part_type;
-
-	/*
-	 * Static partition definition selection
-	 */
-	part_type = "static";
-
- 	parts = toto_flash_partitions;
-	nb_parts = ARRAY_SIZE(toto_flash_partitions);
-	omap_toto_map_flash.size = OMAP_TOTO_FLASH_SIZE;
-	omap_toto_map_flash.phys = virt_to_phys(OMAP_TOTO_FLASH_BASE);
-
-	simple_map_init(&omap_toto_map_flash);
-	/*
-	 * Now let's probe for the actual flash.  Do it here since
-	 * specific machine settings might have been set above.
-	 */
-	printk(KERN_NOTICE "OMAP toto flash: probing %d-bit flash bus\n",
-		omap_toto_map_flash.bankwidth*8);
-	flash_mtd = do_map_probe("jedec_probe", &omap_toto_map_flash);
-	if (!flash_mtd)
-		return -ENXIO;
-
- 	if (parsed_nr_parts > 0) {
-		parts = parsed_parts;
-		nb_parts = parsed_nr_parts;
-	}
-
-	if (nb_parts == 0) {
-		printk(KERN_NOTICE "OMAP toto flash: no partition info available,"
-			"registering whole flash at once\n");
-		if (add_mtd_device(flash_mtd)){
-            return -ENXIO;
-        }
-	} else {
-		printk(KERN_NOTICE "Using %s partition definition\n",
-			part_type);
-		return add_mtd_partitions(flash_mtd, parts, nb_parts);
-	}
-	return 0;
-}
-
-int __init omap_toto_mtd_init(void)
-{
-	int status;
-
- 	if (status = init_flash()) {
-		printk(KERN_ERR "OMAP Toto Flash: unable to init map for toto flash\n");
-	}
-    return status;
-}
-
-static void  __exit omap_toto_mtd_cleanup(void)
-{
-	if (flash_mtd) {
-		del_mtd_partitions(flash_mtd);
-		map_destroy(flash_mtd);
-		kfree(parsed_parts);
-	}
-}
-
-module_init(omap_toto_mtd_init);
-module_exit(omap_toto_mtd_cleanup);
-
-MODULE_AUTHOR("Jian Zhang");
-MODULE_DESCRIPTION("OMAP Toto board map driver");
-MODULE_LICENSE("GPL");