Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits)
  [SKY2]: status polling loop (post merge)
  [NET]: Fix NAPI completion handling in some drivers.
  [TCP]: Limit processing lost_retrans loop to work-to-do cases
  [TCP]: Fix lost_retrans loop vs fastpath problems
  [TCP]: No need to re-count fackets_out/sacked_out at RTO
  [TCP]: Extract tcp_match_queue_to_sack from sacktag code
  [TCP]: Kill almost unused variable pcount from sacktag
  [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L
  [TCP]: Add bytes_acked (ABC) clearing to FRTO too
  [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2
  [NETFILTER]: x_tables: add missing ip6t_modulename aliases
  [NETFILTER]: nf_conntrack_tcp: fix connection reopening
  [QETH]: fix qeth_main.c
  [NETLINK]: fib_frontend build fixes
  [IPv6]: Export userland ND options through netlink (RDNSS support)
  [9P]: build fix with !CONFIG_SYSCTL
  [NET]: Fix dev_put() and dev_hold() comments
  [NET]: make netlink user -> kernel interface synchronious
  [NET]: unify netlink kernel socket recognition
  [NET]: cleanup 3rd argument in netlink_sendskb
  ...

Fix up conflicts manually in Documentation/feature-removal-schedule.txt
and my new least favourite crap, the "mod_devicetable" support in the
files include/linux/mod_devicetable.h and scripts/mod/file2alias.c.

(The latter files seem to be explicitly _designed_ to get conflicts when
different subsystems work with them - that have an absolutely horrid
lack of subsystem separation!)

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 141 insertions, 118 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c5519250efd9..9c635a237a9d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -135,6 +135,12 @@ config TUN
 
 	  If you don't know what to use this for, you don't need it.
 
+config VETH
+	tristate "Virtual ethernet device"
+	---help---
+	  The device is an ethernet tunnel. Devices are created in pairs. When
+	  one end receives the packet it appears on its pair and vice versa.
+
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
 	depends on PNP
@@ -159,6 +165,15 @@ config NET_SB1000
 
 	  If you don't have this card, of course say N.
 
+config IP1000
+       tristate "IP1000 Gigabit Ethernet support"
+       depends on PCI && EXPERIMENTAL
+       ---help---
+         This driver supports IP1000 gigabit Ethernet cards.
+
+         To compile this driver as a module, choose M here: the module
+         will be called ipg.  This is recommended.
+
 source "drivers/net/arcnet/Kconfig"
 
 source "drivers/net/phy/Kconfig"
@@ -225,6 +240,13 @@ config AX88796
 	  AX88796 driver, using platform bus to provide
 	  chip detection and resources
 
+config AX88796_93CX6
+	bool "ASIX AX88796 external 93CX6 eeprom support"
+	depends on AX88796
+	select EEPROM_93CX6
+	help
+	  Select this if your platform comes with an external 93CX6 eeprom.
+
 config MACE
 	tristate "MACE (Power Mac ethernet) support"
 	depends on PPC_PMAC && PPC32
@@ -466,10 +488,6 @@ config MIPS_AU1X00_ENET
 	  If you have an Alchemy Semi AU1X00 based system
 	  say Y.  Otherwise, say N.
 
-config NET_SB1250_MAC
-	tristate "SB1250 Ethernet support"
-	depends on SIBYTE_SB1xxx_SOC
-
 config SGI_IOC3_ETH
 	bool "SGI IOC3 Ethernet"
 	depends on PCI && SGI_IP27
@@ -480,26 +498,6 @@ config SGI_IOC3_ETH
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-config SGI_IOC3_ETH_HW_RX_CSUM
-	bool "Receive hardware checksums"
-	depends on SGI_IOC3_ETH && INET
-	default y
-	help
-	  The SGI IOC3 network adapter supports TCP and UDP checksums in
-	  hardware to offload processing of these checksums from the CPU.  At
-	  the moment only acceleration of IPv4 is supported.  This option
-	  enables offloading for checksums on receive.  If unsure, say Y.
-
-config SGI_IOC3_ETH_HW_TX_CSUM
-	bool "Transmit hardware checksums"
-	depends on SGI_IOC3_ETH && INET
-	default y
-	help
-	  The SGI IOC3 network adapter supports TCP and UDP checksums in
-	  hardware to offload processing of these checksums from the CPU.  At
-	  the moment only acceleration of IPv4 is supported.  This option
-	  enables offloading for checksums on transmit.  If unsure, say Y.
-
 config MIPS_SIM_NET
 	tristate "MIPS simulator Network device"
 	depends on MIPS_SIM
@@ -843,6 +841,8 @@ config BFIN_MAC
 	tristate "Blackfin 536/537 on-chip mac support"
 	depends on NET_ETHERNET && (BF537 || BF536) && (!BF537_PORT_H)
 	select CRC32
+	select MII
+	select PHYLIB
 	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
 	help
 	  This is the driver for blackfin on-chip mac device. Say Y if you want it
@@ -944,7 +944,7 @@ config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
 	select MII
-	depends on ARCH_PXA
+	depends on ARCH_PXA || SUPERH
 	help
 	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
@@ -1250,75 +1250,8 @@ config IBMVETH
 	  <file:Documentation/networking/net-modules.txt>. The module will
 	  be called ibmveth.
 
-config IBM_EMAC
-	tristate "PowerPC 4xx on-chip Ethernet support"
-	depends on 4xx && !PPC_MERGE
-	help
-	  This driver supports the PowerPC 4xx EMAC family of on-chip
-          Ethernet controllers.
-
-config IBM_EMAC_RXB
-	int "Number of receive buffers"
-	depends on IBM_EMAC
-	default "128"
-
-config IBM_EMAC_TXB
-	int "Number of transmit buffers"
-	depends on IBM_EMAC
-	default "64"
-
-config IBM_EMAC_POLL_WEIGHT
-	int "MAL NAPI polling weight"
-	depends on IBM_EMAC
-	default "32"
-
-config IBM_EMAC_RX_COPY_THRESHOLD
-	int "RX skb copy threshold (bytes)"
-	depends on IBM_EMAC
-	default "256"
-
-config IBM_EMAC_RX_SKB_HEADROOM
-	int "Additional RX skb headroom (bytes)"
-	depends on IBM_EMAC
-	default "0"
-	help
-	  Additional receive skb headroom. Note, that driver
-	  will always reserve at least 2 bytes to make IP header
-	  aligned, so usually there is no need to add any additional
-	  headroom.
-	  
-	  If unsure, set to 0.
-
-config IBM_EMAC_PHY_RX_CLK_FIX
-	bool "PHY Rx clock workaround"
-	depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
-	help
-	  Enable this if EMAC attached to a PHY which doesn't generate
-	  RX clock if there is no link, if this is the case, you will 
-	  see "TX disable timeout" or "RX disable timeout" in the system
-	  log.
-	  
-	  If unsure, say N.
-
-config IBM_EMAC_DEBUG
-	bool "Debugging"
-	depends on IBM_EMAC
-	default n
-
-config IBM_EMAC_ZMII
-	bool
-	depends on IBM_EMAC && (NP405H || NP405L || 44x)
-	default y
-
-config IBM_EMAC_RGMII
-	bool
-	depends on IBM_EMAC && 440GX
-	default y
-		
-config IBM_EMAC_TAH
-	bool
-	depends on IBM_EMAC && 440GX
-	default y
+source "drivers/net/ibm_emac/Kconfig"
+source "drivers/net/ibm_newemac/Kconfig"
 
 config NET_PCI
 	bool "EISA, VLB, PCI and on board controllers"
@@ -1453,18 +1386,38 @@ config APRICOT
 	  called apricot.
 
 config B44
-	tristate "Broadcom 4400 ethernet support"
-	depends on NET_PCI && PCI
+	tristate "Broadcom 440x/47xx ethernet support"
+	depends on SSB_POSSIBLE
+	select SSB
 	select MII
 	help
-	  If you have a network (Ethernet) controller of this type, say Y and
-	  read the Ethernet-HOWTO, available from
+	  If you have a network (Ethernet) controller of this type, say Y
+	  or M and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
 	  To compile this driver as a module, choose M here and read
 	  <file:Documentation/networking/net-modules.txt>.  The module will be
 	  called b44.
 
+# Auto-select SSB PCI-HOST support, if possible
+config B44_PCI_AUTOSELECT
+	bool
+	depends on B44 && SSB_PCIHOST_POSSIBLE
+	select SSB_PCIHOST
+	default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B44_PCICORE_AUTOSELECT
+	bool
+	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
+	select SSB_DRIVER_PCICORE
+	default y
+
+config B44_PCI
+	bool
+	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
+	default y
+
 config FORCEDETH
 	tristate "nForce Ethernet support"
 	depends on NET_PCI && PCI
@@ -1513,21 +1466,6 @@ config TC35815
 	depends on NET_PCI && PCI && MIPS
 	select MII
 
-config DGRS
-	tristate "Digi Intl. RightSwitch SE-X support"
-	depends on NET_PCI && (PCI || EISA)
-	---help---
-	  This is support for the Digi International RightSwitch series of
-	  PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
-	  models.  If you have a network card of this type, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  More specific
-	  information is contained in <file:Documentation/networking/dgrs.txt>.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
-	  will be called dgrs.
-
 config EEPRO100
 	tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
 	depends on NET_PCI && PCI
@@ -2009,14 +1947,15 @@ config ACENIC_OMIT_TIGON_I
 	  The safe and default value for this is N.
 
 config DL2K
-	tristate "D-Link DL2000-based Gigabit Ethernet support"
+	tristate "DL2000/TC902x-based Gigabit Ethernet support"
 	depends on PCI
 	select CRC32
 	help
-	  This driver supports D-Link 2000-based gigabit ethernet cards, which
-	  includes
+	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+	  which includes
 	  D-Link DGE-550T Gigabit Ethernet Adapter.
 	  D-Link DL2000-based Gigabit Ethernet Adapter.
+	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called dl2k.
@@ -2069,6 +2008,29 @@ config E1000_DISABLE_PACKET_SPLIT
 
 	  If in doubt, say N.
 
+config E1000E
+	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
+	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
+	  use the regular e1000 driver For more information on how to
+	  identify your adapter, go to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/e1000e.txt>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called e1000e.
+
 source "drivers/net/ixp2000/Kconfig"
 
 config MYRI_SBUS
@@ -2153,6 +2115,19 @@ config R8169_VLAN
 	  
 	  If in doubt, say Y.
 
+config SB1250_MAC
+	tristate "SB1250 Gigabit Ethernet support"
+	depends on SIBYTE_SB1xxx_SOC
+	select PHYLIB
+	---help---
+	  This driver supports Gigabit Ethernet interfaces based on the
+	  Broadcom SiByte family of System-On-a-Chip parts.  They include
+	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
+	  and BCM1480 chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sb1250-mac.
+
 config SIS190
 	tristate "SiS190/SiS191 gigabit ethernet support"
 	depends on PCI
@@ -2501,18 +2476,42 @@ config CHELSIO_T3
 config EHEA
 	tristate "eHEA Ethernet support"
 	depends on IBMEBUS
+	select INET_LRO
 	---help---
 	  This driver supports the IBM pSeries eHEA ethernet adapter.
 
 	  To compile the driver as a module, choose M here. The module
 	  will be called ehea.
 
+config IXGBE
+	tristate "Intel(R) 10GbE PCI Express adapters support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) 10GbE PCI Express family of
+	  adapters.  For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/ixgbe.txt>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called ixgbe.
+
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
 	depends on PCI
 	---help---
-	  This driver supports Intel(R) PRO/10GbE family of
-	  adapters.  For more information on how to identify your adapter, go
+	  This driver supports Intel(R) PRO/10GbE family of adapters for
+	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
+	  instead. For more information on how to identify your adapter, go
 	  to the Adapter & Driver ID Guide at:
 
 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
@@ -2576,6 +2575,7 @@ config MYRI10GE
 	depends on PCI
 	select FW_LOADER
 	select CRC32
+	select INET_LRO
 	---help---
 	  This driver supports Myricom Myri-10G Dual Protocol interface in
 	  Ethernet mode. If the eeprom on your board is not recent enough,
@@ -2594,6 +2594,13 @@ config NETXEN_NIC
 	help
 	  This enables the support for NetXen's Gigabit Ethernet card.
 
+config NIU
+	tristate "Sun Neptune 10Gbit Ethernet support"
+	depends on PCI
+	help
+	  This enables support for cards based upon Sun's
+	  Neptune chipset.
+
 config PASEMI_MAC
 	tristate "PA Semi 1/10Gbit MAC"
 	depends on PPC64 && PCI
@@ -2617,6 +2624,12 @@ config MLX4_DEBUG
 	  debug_level module parameter (which can also be set after
 	  the driver is loaded through sysfs).
 
+config TEHUTI
+	tristate "Tehuti Networks 10G Ethernet"
+	depends on PCI
+	help
+	  Tehuti Networks 10G Ethernet NIC
+
 endif # NETDEV_10000
 
 source "drivers/net/tokenring/Kconfig"
@@ -3074,6 +3087,16 @@ config NETCONSOLE
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
+config NETCONSOLE_DYNAMIC
+	bool "Dynamic reconfiguration of logging targets (EXPERIMENTAL)"
+	depends on NETCONSOLE && SYSFS && EXPERIMENTAL
+	select CONFIGFS_FS
+	help
+	  This option enables the ability to dynamically reconfigure target
+	  parameters (interface, IP addresses, port numbers, MAC addresses)
+	  at runtime through a userspace interface exported using configfs.
+	  See <file:Documentation/networking/netconsole.txt> for details.
+
 config NETPOLL
 	def_bool NETCONSOLE