summaryrefslogtreecommitdiff
path: root/drivers/net/hydra.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/hydra.h
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/hydra.h')
-rw-r--r--drivers/net/hydra.h177
1 files changed, 177 insertions, 0 deletions
diff --git a/drivers/net/hydra.h b/drivers/net/hydra.h
new file mode 100644
index 000000000000..37414146258d
--- /dev/null
+++ b/drivers/net/hydra.h
@@ -0,0 +1,177 @@
+/* $Linux: hydra.h,v 1.0 1994/10/26 02:03:47 cgd Exp $ */
+
+/*
+ * Copyright (c) 1994 Timo Rossi
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Timo Rossi
+ * 4. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * The Hydra Systems card uses the National Semiconductor
+ * 8390 NIC (Network Interface Controller) chip, located
+ * at card base address + 0xffe1. NIC registers are accessible
+ * only at odd byte addresses, so the register offsets must
+ * be multiplied by two.
+ *
+ * Card address PROM is located at card base + 0xffc0 (even byte addresses)
+ *
+ * RAM starts at the card base address, and is 16K or 64K.
+ * The current Amiga NetBSD hydra driver is hardwired for 16K.
+ * It seems that the RAM should be accessed as words or longwords only.
+ *
+ */
+
+/* adapted for Linux by Topi Kanerva 03/29/95
+ with original author's permission */
+
+#define HYDRA_NIC_BASE 0xffe1
+
+/* Page0 registers */
+
+#define NIC_CR 0 /* Command register */
+#define NIC_PSTART (1*2) /* Page start (write) */
+#define NIC_PSTOP (2*2) /* Page stop (write) */
+#define NIC_BNDRY (3*2) /* Boundary pointer */
+#define NIC_TSR (4*2) /* Transmit status (read) */
+#define NIC_TPSR (4*2) /* Transmit page start (write) */
+#define NIC_NCR (5*2) /* Number of collisions, read */
+#define NIC_TBCR0 (5*2) /* Transmit byte count low (write) */
+#define NIC_FIFO (6*2) /* FIFO reg. (read) */
+#define NIC_TBCR1 (6*2) /* Transmit byte count high (write) */
+#define NIC_ISR (7*2) /* Interrupt status register */
+#define NIC_RBCR0 (0xa*2) /* Remote byte count low (write) */
+#define NIC_RBCR1 (0xb*2) /* Remote byte count high (write) */
+#define NIC_RSR (0xc*2) /* Receive status (read) */
+#define NIC_RCR (0xc*2) /* Receive config (write) */
+#define NIC_CNTR0 (0xd*2) /* Frame alignment error count (read) */
+#define NIC_TCR (0xd*2) /* Transmit config (write) */
+#define NIC_CNTR1 (0xe*2) /* CRC error counter (read) */
+#define NIC_DCR (0xe*2) /* Data config (write) */
+#define NIC_CNTR2 (0xf*2) /* missed packet counter (read) */
+#define NIC_IMR (0xf*2) /* Interrupt mask reg. (write) */
+
+/* Page1 registers */
+
+#define NIC_PAR0 (1*2) /* Physical address */
+#define NIC_PAR1 (2*2)
+#define NIC_PAR2 (3*2)
+#define NIC_PAR3 (4*2)
+#define NIC_PAR4 (5*2)
+#define NIC_PAR5 (6*2)
+#define NIC_CURR (7*2) /* Current RX ring-buffer page */
+#define NIC_MAR0 (8*2) /* Multicast address */
+#define NIC_MAR1 (9*2)
+#define NIC_MAR2 (0xa*2)
+#define NIC_MAR3 (0xb*2)
+#define NIC_MAR4 (0xc*2)
+#define NIC_MAR5 (0xd*2)
+#define NIC_MAR6 (0xe*2)
+#define NIC_MAR7 (0xf*2)
+
+/* Command register definitions */
+
+#define CR_STOP 0x01 /* Stop -- software reset command */
+#define CR_START 0x02 /* Start */
+#define CR_TXP 0x04 /* Transmit packet */
+
+#define CR_RD0 0x08 /* Remote DMA cmd */
+#define CR_RD1 0x10
+#define CR_RD2 0x20
+
+#define CR_NODMA CR_RD2
+
+#define CR_PS0 0x40 /* Page select */
+#define CR_PS1 0x80
+
+#define CR_PAGE0 0
+#define CR_PAGE1 CR_PS0
+#define CR_PAGE2 CR_PS1
+
+/* Interrupt status reg. definitions */
+
+#define ISR_PRX 0x01 /* Packet received without errors */
+#define ISR_PTX 0x02 /* Packet transmitted without errors */
+#define ISR_RXE 0x04 /* Receive error */
+#define ISR_TXE 0x08 /* Transmit error */
+#define ISR_OVW 0x10 /* Ring buffer overrun */
+#define ISR_CNT 0x20 /* Counter overflow */
+#define ISR_RDC 0x40 /* Remote DMA compile */
+#define ISR_RST 0x80 /* Reset status */
+
+/* Data config reg. definitions */
+
+#define DCR_WTS 0x01 /* Word transfer select */
+#define DCR_BOS 0x02 /* Byte order select */
+#define DCR_LAS 0x04 /* Long address select */
+#define DCR_LS 0x08 /* Loopback select */
+#define DCR_AR 0x10 /* Auto-init remote */
+#define DCR_FT0 0x20 /* FIFO threshold select */
+#define DCR_FT1 0x40
+
+/* Transmit config reg. definitions */
+
+#define TCR_CRC 0x01 /* Inhibit CRC */
+#define TCR_LB0 0x02 /* Loopback control */
+#define TCR_LB1 0x04
+#define TCR_ATD 0x08 /* Auto transmit disable */
+#define TCR_OFST 0x10 /* Collision offset enable */
+
+/* Transmit status reg. definitions */
+
+#define TSR_PTX 0x01 /* Packet transmitted */
+#define TSR_COL 0x04 /* Transmit collided */
+#define TSR_ABT 0x08 /* Transmit aborted */
+#define TSR_CRS 0x10 /* Carrier sense lost */
+#define TSR_FU 0x20 /* FIFO underrun */
+#define TSR_CDH 0x40 /* CD Heartbeat */
+#define TSR_OWC 0x80 /* Out of Window Collision */
+
+/* Receiver config register definitions */
+
+#define RCR_SEP 0x01 /* Save errored packets */
+#define RCR_AR 0x02 /* Accept runt packets */
+#define RCR_AB 0x04 /* Accept broadcast */
+#define RCR_AM 0x08 /* Accept multicast */
+#define RCR_PRO 0x10 /* Promiscuous mode */
+#define RCR_MON 0x20 /* Monitor mode */
+
+/* Receiver status register definitions */
+
+#define RSR_PRX 0x01 /* Packet received without error */
+#define RSR_CRC 0x02 /* CRC error */
+#define RSR_FAE 0x04 /* Frame alignment error */
+#define RSR_FO 0x08 /* FIFO overrun */
+#define RSR_MPA 0x10 /* Missed packet */
+#define RSR_PHY 0x20 /* Physical address */
+#define RSR_DIS 0x40 /* Received disabled */
+#define RSR_DFR 0x80 /* Deferring (jabber) */
+
+/* Hydra System card address PROM offset */
+
+#define HYDRA_ADDRPROM 0xffc0
+
+