Merge branch 'linus'

Conflicts:

	drivers/scsi/ipr.c

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 336 insertions, 207 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 822dd0b13133..f2ab3d56e565 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -49,7 +49,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.10"
+#define DRV_VERSION		"1.12"
 #define PFX			DRV_NAME " "
 
 /*
@@ -105,6 +105,7 @@ static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },	/* DGE-560T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, 	/* DGE-550SX */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) },	/* DGE-560SX */
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) },	/* DGE-550T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
@@ -126,6 +127,9 @@ static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
 	{ 0 }
 };
 
@@ -140,7 +144,7 @@ static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
 static const char *yukon2_name[] = {
 	"XL",		/* 0xb3 */
 	"EC Ultra", 	/* 0xb4 */
-	"UNKNOWN",	/* 0xb5 */
+	"Extreme",	/* 0xb5 */
 	"EC",		/* 0xb6 */
 	"FE",		/* 0xb7 */
 };
@@ -192,76 +196,52 @@ static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
 	return v;
 }
 
-static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
-{
-	u16 power_control;
-	int vaux;
-
-	pr_debug("sky2_set_power_state %d\n", state);
-	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
-	power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
-	vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
-		(power_control & PCI_PM_CAP_PME_D3cold);
-
-	power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
-
-	power_control |= PCI_PM_CTRL_PME_STATUS;
-	power_control &= ~(PCI_PM_CTRL_STATE_MASK);
 
-	switch (state) {
-	case PCI_D0:
-		/* switch power to VCC (WA for VAUX problem) */
-		sky2_write8(hw, B0_POWER_CTRL,
-			    PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
-
-		/* disable Core Clock Division, */
-		sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
-
-		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
-			/* enable bits are inverted */
-			sky2_write8(hw, B2_Y2_CLK_GATE,
-				    Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
-				    Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
-				    Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
-		else
-			sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+static void sky2_power_on(struct sky2_hw *hw)
+{
+	/* switch power to VCC (WA for VAUX problem) */
+	sky2_write8(hw, B0_POWER_CTRL,
+		    PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
 
-		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-			u32 reg1;
+	/* disable Core Clock Division, */
+	sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
 
-			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
-			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
-			reg1 &= P_ASPM_CONTROL_MSK;
-			sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
-			sky2_pci_write32(hw, PCI_DEV_REG5, 0);
-		}
+	if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+		/* enable bits are inverted */
+		sky2_write8(hw, B2_Y2_CLK_GATE,
+			    Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+			    Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+			    Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+	else
+		sky2_write8(hw, B2_Y2_CLK_GATE, 0);
 
-		break;
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
+		u32 reg1;
 
-	case PCI_D3hot:
-	case PCI_D3cold:
-		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
-			sky2_write8(hw, B2_Y2_CLK_GATE, 0);
-		else
-			/* enable bits are inverted */
-			sky2_write8(hw, B2_Y2_CLK_GATE,
-				    Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
-				    Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
-				    Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
-
-		/* switch power to VAUX */
-		if (vaux && state != PCI_D3cold)
-			sky2_write8(hw, B0_POWER_CTRL,
-				    (PC_VAUX_ENA | PC_VCC_ENA |
-				     PC_VAUX_ON | PC_VCC_OFF));
-		break;
-	default:
-		printk(KERN_ERR PFX "Unknown power state %d\n", state);
+		sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+		reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
+		reg1 &= P_ASPM_CONTROL_MSK;
+		sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
+		sky2_pci_write32(hw, PCI_DEV_REG5, 0);
 	}
+}
 
-	sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
-	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+static void sky2_power_aux(struct sky2_hw *hw)
+{
+	if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+		sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+	else
+		/* enable bits are inverted */
+		sky2_write8(hw, B2_Y2_CLK_GATE,
+			    Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+			    Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+			    Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+
+	/* switch power to VAUX */
+	if (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL)
+		sky2_write8(hw, B0_POWER_CTRL,
+			    (PC_VAUX_ENA | PC_VCC_ENA |
+			     PC_VAUX_ON | PC_VCC_OFF));
 }
 
 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
@@ -313,8 +293,10 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 	struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
 	u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
 
-	if (sky2->autoneg == AUTONEG_ENABLE &&
-	    !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+	if (sky2->autoneg == AUTONEG_ENABLE
+	    && !(hw->chip_id == CHIP_ID_YUKON_XL
+		 || hw->chip_id == CHIP_ID_YUKON_EC_U
+		 || hw->chip_id == CHIP_ID_YUKON_EX)) {
 		u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
 
 		ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -341,8 +323,10 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 			/* enable automatic crossover */
 			ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
 
-			if (sky2->autoneg == AUTONEG_ENABLE &&
-			    (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+			if (sky2->autoneg == AUTONEG_ENABLE
+			    && (hw->chip_id == CHIP_ID_YUKON_XL
+				|| hw->chip_id == CHIP_ID_YUKON_EC_U
+				|| hw->chip_id == CHIP_ID_YUKON_EX)) {
 				ctrl &= ~PHY_M_PC_DSC_MSK;
 				ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
 			}
@@ -497,7 +481,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		/* restore page register */
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 		break;
+
 	case CHIP_ID_YUKON_EC_U:
+	case CHIP_ID_YUKON_EX:
 		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
 
 		/* select page 3 to access LED control register */
@@ -539,7 +525,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 
 		/* set page register to 0 */
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-	} else {
+	} else if (hw->chip_id != CHIP_ID_YUKON_EX) {
 		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
 
 		if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
@@ -591,6 +577,73 @@ static void sky2_phy_reinit(struct sky2_port *sky2)
 	spin_unlock_bh(&sky2->phy_lock);
 }
 
+/* Put device in state to listen for Wake On Lan */
+static void sky2_wol_init(struct sky2_port *sky2)
+{
+	struct sky2_hw *hw = sky2->hw;
+	unsigned port = sky2->port;
+	enum flow_control save_mode;
+	u16 ctrl;
+	u32 reg1;
+
+	/* Bring hardware out of reset */
+	sky2_write16(hw, B0_CTST, CS_RST_CLR);
+	sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+	sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+	sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+	/* Force to 10/100
+	 * sky2_reset will re-enable on resume
+	 */
+	save_mode = sky2->flow_mode;
+	ctrl = sky2->advertising;
+
+	sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+	sky2->flow_mode = FC_NONE;
+	sky2_phy_power(hw, port, 1);
+	sky2_phy_reinit(sky2);
+
+	sky2->flow_mode = save_mode;
+	sky2->advertising = ctrl;
+
+	/* Set GMAC to no flow control and auto update for speed/duplex */
+	gma_write16(hw, port, GM_GP_CTRL,
+		    GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
+		    GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
+
+	/* Set WOL address */
+	memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
+		    sky2->netdev->dev_addr, ETH_ALEN);
+
+	/* Turn on appropriate WOL control bits */
+	sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
+	ctrl = 0;
+	if (sky2->wol & WAKE_PHY)
+		ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
+	else
+		ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
+
+	if (sky2->wol & WAKE_MAGIC)
+		ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
+	else
+		ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
+
+	ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
+	sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
+
+	/* Turn on legacy PCI-Express PME mode */
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+	reg1 |= PCI_Y2_PME_LEGACY;
+	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+	/* block receiver */
+	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+
+}
+
 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 {
 	struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
@@ -684,7 +737,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 	sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
 	sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
 		sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
 		sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
 		if (hw->dev[port]->mtu > ETH_DATA_LEN) {
@@ -1467,6 +1520,9 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 			if (unlikely(netif_msg_tx_done(sky2)))
 				printk(KERN_DEBUG "%s: tx done %u\n",
 				       dev->name, idx);
+			sky2->net_stats.tx_packets++;
+			sky2->net_stats.tx_bytes += re->skb->len;
+
 			dev_kfree_skb_any(re->skb);
 		}
 
@@ -1641,7 +1697,9 @@ static void sky2_link_up(struct sky2_port *sky2)
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG),
 		    LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
 
-	if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
+	if (hw->chip_id == CHIP_ID_YUKON_XL
+	    || hw->chip_id == CHIP_ID_YUKON_EC_U
+	    || hw->chip_id == CHIP_ID_YUKON_EX) {
 		u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
 		u16 led = PHY_M_LEDC_LOS_CTRL(1);	/* link active */
 
@@ -1734,14 +1792,16 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
 	sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
 
 	/* Pause bits are offset (9..8) */
-	if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
+	if (hw->chip_id == CHIP_ID_YUKON_XL
+	    || hw->chip_id == CHIP_ID_YUKON_EC_U
+	    || hw->chip_id == CHIP_ID_YUKON_EX)
 		aux >>= 6;
 
 	sky2->flow_status = sky2_flow(aux & PHY_M_PS_RX_P_EN,
 				      aux & PHY_M_PS_TX_P_EN);
 
 	if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000
-	    && hw->chip_id != CHIP_ID_YUKON_EC_U)
+	    && !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
 		sky2->flow_status = FC_NONE;
 
 	if (aux & PHY_M_PS_RX_P_EN)
@@ -1794,48 +1854,37 @@ out:
 }
 
 
-/* Transmit timeout is only called if we are running, carries is up
+/* Transmit timeout is only called if we are running, carrier is up
  * and tx queue is full (stopped).
+ * Called with netif_tx_lock held.
  */
 static void sky2_tx_timeout(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
-	unsigned txq = txqaddr[sky2->port];
-	u16 report, done;
+	u32 imask;
 
 	if (netif_msg_timer(sky2))
 		printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
 
-	report = sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX);
-	done = sky2_read16(hw, Q_ADDR(txq, Q_DONE));
-
 	printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
-	       dev->name,
-	       sky2->tx_cons, sky2->tx_prod, report, done);
+	       dev->name, sky2->tx_cons, sky2->tx_prod,
+	       sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+	       sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
 
-	if (report != done) {
-		printk(KERN_INFO PFX "status burst pending (irq moderation?)\n");
-
-		sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
-		sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
-	} else if (report != sky2->tx_cons) {
-		printk(KERN_INFO PFX "status report lost?\n");
+	imask = sky2_read32(hw, B0_IMSK);	/* block IRQ in hw */
+	sky2_write32(hw, B0_IMSK, 0);
+	sky2_read32(hw, B0_IMSK);
 
-		netif_tx_lock_bh(dev);
-		sky2_tx_complete(sky2, report);
-		netif_tx_unlock_bh(dev);
-	} else {
-		printk(KERN_INFO PFX "hardware hung? flushing\n");
+	netif_poll_disable(hw->dev[0]);		/* stop NAPI poll */
+	synchronize_irq(hw->pdev->irq);
 
-		sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP);
-		sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
+	netif_start_queue(dev);			/* don't wakeup during flush */
+	sky2_tx_complete(sky2, sky2->tx_prod);	/* Flush transmit queue */
 
-		sky2_tx_clean(dev);
+	sky2_write32(hw, B0_IMSK, imask);
 
-		sky2_qset(hw, txq);
-		sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1);
-	}
+	sky2_phy_reinit(sky2);			/* this clears flow control etc */
 }
 
 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
@@ -1849,8 +1898,9 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
 	if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
 		return -EINVAL;
 
+	/* TSO on Yukon Ultra and MTU > 1500 not supported */
 	if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN)
-		return -EINVAL;
+		dev->features &= ~NETIF_F_TSO;
 
 	if (!netif_running(dev)) {
 		dev->mtu = new_mtu;
@@ -2089,6 +2139,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 				goto force_update;
 
 			skb->protocol = eth_type_trans(skb, dev);
+			sky2->net_stats.rx_packets++;
+			sky2->net_stats.rx_bytes += skb->len;
 			dev->last_rx = jiffies;
 
 #ifdef SKY2_VLAN_TAG_USED
@@ -2218,8 +2270,8 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 
 		pci_err = sky2_pci_read16(hw, PCI_STATUS);
 		if (net_ratelimit())
-			printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
-			       pci_name(hw->pdev), pci_err);
+			dev_err(&hw->pdev->dev, "PCI hardware error (0x%x)\n",
+			        pci_err);
 
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		sky2_pci_write16(hw, PCI_STATUS,
@@ -2234,8 +2286,8 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 		pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
 
 		if (net_ratelimit())
-			printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
-			       pci_name(hw->pdev), pex_err);
+			dev_err(&hw->pdev->dev, "PCI Express error (0x%x)\n",
+				pex_err);
 
 		/* clear the interrupt */
 		sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
@@ -2404,6 +2456,7 @@ static inline u32 sky2_mhz(const struct sky2_hw *hw)
 	switch (hw->chip_id) {
 	case CHIP_ID_YUKON_EC:
 	case CHIP_ID_YUKON_EC_U:
+	case CHIP_ID_YUKON_EX:
 		return 125;	/* 125 Mhz */
 	case CHIP_ID_YUKON_FE:
 		return 100;	/* 100 Mhz */
@@ -2423,34 +2476,62 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 }
 
 
-static int sky2_reset(struct sky2_hw *hw)
+static int __devinit sky2_init(struct sky2_hw *hw)
 {
-	u16 status;
 	u8 t8;
-	int i;
 
 	sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
 	hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
 	if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
-		printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
-		       pci_name(hw->pdev), hw->chip_id);
+		dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
+			hw->chip_id);
 		return -EOPNOTSUPP;
 	}
 
+	if (hw->chip_id == CHIP_ID_YUKON_EX)
+		dev_warn(&hw->pdev->dev, "this driver not yet tested on this chip type\n"
+			 "Please report success or failure to <netdev@vger.kernel.org>\n");
+
+	/* Make sure and enable all clocks */
+	if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
+		sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
 	hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
 
 	/* This rev is really old, and requires untested workarounds */
 	if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) {
-		printk(KERN_ERR PFX "%s: unsupported revision Yukon-%s (0x%x) rev %d\n",
-		       pci_name(hw->pdev), yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
-		       hw->chip_id, hw->chip_rev);
+		dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n",
+			yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
+			hw->chip_id, hw->chip_rev);
 		return -EOPNOTSUPP;
 	}
 
+	hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
+	hw->ports = 1;
+	t8 = sky2_read8(hw, B2_Y2_HW_RES);
+	if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
+		if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
+			++hw->ports;
+	}
+
+	return 0;
+}
+
+static void sky2_reset(struct sky2_hw *hw)
+{
+	u16 status;
+	int i;
+
 	/* disable ASF */
 	if (hw->chip_id <= CHIP_ID_YUKON_EC) {
-		sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
+		if (hw->chip_id == CHIP_ID_YUKON_EX) {
+			status = sky2_read16(hw, HCU_CCSR);
+			status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
+				    HCU_CCSR_UC_STATE_MSK);
+			sky2_write16(hw, HCU_CCSR, status);
+		} else
+			sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
 		sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
 	}
 
@@ -2472,15 +2553,7 @@ static int sky2_reset(struct sky2_hw *hw)
 		sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
 
 
-	hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
-	hw->ports = 1;
-	t8 = sky2_read8(hw, B2_Y2_HW_RES);
-	if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
-		if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
-			++hw->ports;
-	}
-
-	sky2_set_power_state(hw, PCI_D0);
+	sky2_power_on(hw);
 
 	for (i = 0; i < hw->ports; i++) {
 		sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
@@ -2563,7 +2636,37 @@ static int sky2_reset(struct sky2_hw *hw)
 	sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
 	sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
 	sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
+}
+
+static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
+{
+	return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
+}
+
+static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	const struct sky2_port *sky2 = netdev_priv(dev);
+
+	wol->supported = sky2_wol_supported(sky2->hw);
+	wol->wolopts = sky2->wol;
+}
+
+static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	struct sky2_hw *hw = sky2->hw;
+
+	if (wol->wolopts & ~sky2_wol_supported(sky2->hw))
+		return -EOPNOTSUPP;
+
+	sky2->wol = wol->wolopts;
+
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U)
+		sky2_write32(hw, B0_CTST, sky2->wol
+			     ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
 
+	if (!netif_running(dev))
+		sky2_wol_init(sky2);
 	return 0;
 }
 
@@ -2814,25 +2917,9 @@ static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
 	}
 }
 
-/* Use hardware MIB variables for critical path statistics and
- * transmit feedback not reported at interrupt.
- * Other errors are accounted for in interrupt handler.
- */
 static struct net_device_stats *sky2_get_stats(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
-	u64 data[13];
-
-	sky2_phy_stats(sky2, data, ARRAY_SIZE(data));
-
-	sky2->net_stats.tx_bytes = data[0];
-	sky2->net_stats.rx_bytes = data[1];
-	sky2->net_stats.tx_packets = data[2] + data[4] + data[6];
-	sky2->net_stats.rx_packets = data[3] + data[5] + data[7];
-	sky2->net_stats.multicast = data[3] + data[5];
-	sky2->net_stats.collisions = data[10];
-	sky2->net_stats.tx_aborted_errors = data[12];
-
 	return &sky2->net_stats;
 }
 
@@ -3191,7 +3278,9 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 static const struct ethtool_ops sky2_ethtool_ops = {
 	.get_settings = sky2_get_settings,
 	.set_settings = sky2_set_settings,
-	.get_drvinfo = sky2_get_drvinfo,
+	.get_drvinfo  = sky2_get_drvinfo,
+	.get_wol      = sky2_get_wol,
+	.set_wol      = sky2_set_wol,
 	.get_msglevel = sky2_get_msglevel,
 	.set_msglevel = sky2_set_msglevel,
 	.nway_reset   = sky2_nway_reset,
@@ -3221,13 +3310,14 @@ static const struct ethtool_ops sky2_ethtool_ops = {
 
 /* Initialize network device */
 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
-						     unsigned port, int highmem)
+						     unsigned port,
+						     int highmem, int wol)
 {
 	struct sky2_port *sky2;
 	struct net_device *dev = alloc_etherdev(sizeof(*sky2));
 
 	if (!dev) {
-		printk(KERN_ERR "sky2 etherdev alloc failed");
+		dev_err(&hw->pdev->dev, "etherdev alloc failed");
 		return NULL;
 	}
 
@@ -3269,6 +3359,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	sky2->speed = -1;
 	sky2->advertising = sky2_supported_modes(hw);
 	sky2->rx_csum = 1;
+	sky2->wol = wol;
 
 	spin_lock_init(&sky2->phy_lock);
 	sky2->tx_pending = TX_DEF_PENDING;
@@ -3278,11 +3369,9 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 
 	sky2->port = port;
 
-	if (hw->chip_id != CHIP_ID_YUKON_EC_U)
-		dev->features |= NETIF_F_TSO;
+	dev->features |= NETIF_F_TSO | NETIF_F_IP_CSUM | NETIF_F_SG;
 	if (highmem)
 		dev->features |= NETIF_F_HIGHDMA;
-	dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 
 #ifdef SKY2_VLAN_TAG_USED
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
@@ -3343,8 +3432,7 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
 
 	err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
 	if (err) {
-		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
-		       pci_name(pdev), pdev->irq);
+		dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
 		return err;
 	}
 
@@ -3355,9 +3443,8 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
 
 	if (!hw->msi) {
 		/* MSI test failed, go back to INTx mode */
-		printk(KERN_INFO PFX "%s: No interrupt generated using MSI, "
-		       "switching to INTx mode.\n",
-		       pci_name(pdev));
+		dev_info(&pdev->dev, "No interrupt generated using MSI, "
+			 "switching to INTx mode.\n");
 
 		err = -EOPNOTSUPP;
 		sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
@@ -3371,62 +3458,62 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
 	return err;
 }
 
+static int __devinit pci_wake_enabled(struct pci_dev *dev)
+{
+	int pm  = pci_find_capability(dev, PCI_CAP_ID_PM);
+	u16 value;
+
+	if (!pm)
+		return 0;
+	if (pci_read_config_word(dev, pm + PCI_PM_CTRL, &value))
+		return 0;
+	return value & PCI_PM_CTRL_PME_ENABLE;
+}
+
 static int __devinit sky2_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
-	struct net_device *dev, *dev1 = NULL;
+	struct net_device *dev;
 	struct sky2_hw *hw;
-	int err, pm_cap, using_dac = 0;
+	int err, using_dac = 0, wol_default;
 
 	err = pci_enable_device(pdev);
 	if (err) {
-		printk(KERN_ERR PFX "%s cannot enable PCI device\n",
-		       pci_name(pdev));
+		dev_err(&pdev->dev, "cannot enable PCI device\n");
 		goto err_out;
 	}
 
 	err = pci_request_regions(pdev, DRV_NAME);
 	if (err) {
-		printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
-		       pci_name(pdev));
+		dev_err(&pdev->dev, "cannot obtain PCI resources\n");
 		goto err_out;
 	}
 
 	pci_set_master(pdev);
 
-	/* Find power-management capability. */
-	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
-	if (pm_cap == 0) {
-		printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
-		       "aborting.\n");
-		err = -EIO;
-		goto err_out_free_regions;
-	}
-
 	if (sizeof(dma_addr_t) > sizeof(u32) &&
 	    !(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
 		using_dac = 1;
 		err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 		if (err < 0) {
-			printk(KERN_ERR PFX "%s unable to obtain 64 bit DMA "
-			       "for consistent allocations\n", pci_name(pdev));
+			dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
+				"for consistent allocations\n");
 			goto err_out_free_regions;
 		}
-
 	} else {
 		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (err) {
-			printk(KERN_ERR PFX "%s no usable DMA configuration\n",
-			       pci_name(pdev));
+			dev_err(&pdev->dev, "no usable DMA configuration\n");
 			goto err_out_free_regions;
 		}
 	}
 
+	wol_default = pci_wake_enabled(pdev) ? WAKE_MAGIC : 0;
+
 	err = -ENOMEM;
 	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
 	if (!hw) {
-		printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
-		       pci_name(pdev));
+		dev_err(&pdev->dev, "cannot allocate hardware struct\n");
 		goto err_out_free_regions;
 	}
 
@@ -3434,11 +3521,9 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 
 	hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
 	if (!hw->regs) {
-		printk(KERN_ERR PFX "%s: cannot map device registers\n",
-		       pci_name(pdev));
+		dev_err(&pdev->dev, "cannot map device registers\n");
 		goto err_out_free_hw;
 	}
-	hw->pm_cap = pm_cap;
 
 #ifdef __BIG_ENDIAN
 	/* The sk98lin vendor driver uses hardware byte swapping but
@@ -3458,18 +3543,22 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	if (!hw->st_le)
 		goto err_out_iounmap;
 
-	err = sky2_reset(hw);
+	err = sky2_init(hw);
 	if (err)
 		goto err_out_iounmap;
 
-	printk(KERN_INFO PFX "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
+	dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
 	       DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
 	       pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
 	       hw->chip_id, hw->chip_rev);
 
-	dev = sky2_init_netdev(hw, 0, using_dac);
-	if (!dev)
+	sky2_reset(hw);
+
+	dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
+	if (!dev) {
+		err = -ENOMEM;
 		goto err_out_free_pci;
+	}
 
 	if (!disable_msi && pci_enable_msi(pdev) == 0) {
 		err = sky2_test_msi(hw);
@@ -3481,32 +3570,33 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 
 	err = register_netdev(dev);
 	if (err) {
-		printk(KERN_ERR PFX "%s: cannot register net device\n",
-		       pci_name(pdev));
+		dev_err(&pdev->dev, "cannot register net device\n");
 		goto err_out_free_netdev;
 	}
 
 	err = request_irq(pdev->irq,  sky2_intr, hw->msi ? 0 : IRQF_SHARED,
 			  dev->name, hw);
 	if (err) {
-		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
-		       pci_name(pdev), pdev->irq);
+		dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
 		goto err_out_unregister;
 	}
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 
 	sky2_show_addr(dev);
 
-	if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) {
-		if (register_netdev(dev1) == 0)
-			sky2_show_addr(dev1);
-		else {
-			/* Failure to register second port need not be fatal */
-			printk(KERN_WARNING PFX
-			       "register of second port failed\n");
+	if (hw->ports > 1) {
+		struct net_device *dev1;
+
+		dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
+		if (!dev1)
+			dev_warn(&pdev->dev, "allocation for second device failed\n");
+		else if ((err = register_netdev(dev1))) {
+			dev_warn(&pdev->dev,
+				 "register of second port failed (%d)\n", err);
 			hw->dev[1] = NULL;
 			free_netdev(dev1);
-		}
+		} else
+			sky2_show_addr(dev1);
 	}
 
 	setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
@@ -3555,7 +3645,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 		unregister_netdev(dev1);
 	unregister_netdev(dev0);
 
-	sky2_set_power_state(hw, PCI_D3hot);
+	sky2_power_aux(hw);
+
 	sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
 	sky2_write8(hw, B0_CTST, CS_RST_SET);
 	sky2_read8(hw, B0_CTST);
@@ -3580,27 +3671,31 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
-	int i;
-	pci_power_t pstate = pci_choose_state(pdev, state);
-
-	if (!(pstate == PCI_D3hot || pstate == PCI_D3cold))
-		return -EINVAL;
+	int i, wol = 0;
 
 	del_timer_sync(&hw->idle_timer);
 	netif_poll_disable(hw->dev[0]);
 
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
+		struct sky2_port *sky2 = netdev_priv(dev);
 
-		if (netif_running(dev)) {
+		if (netif_running(dev))
 			sky2_down(dev);
-			netif_device_detach(dev);
-		}
+
+		if (sky2->wol)
+			sky2_wol_init(sky2);
+
+		wol |= sky2->wol;
 	}
 
 	sky2_write32(hw, B0_IMSK, 0);
+	sky2_power_aux(hw);
+
 	pci_save_state(pdev);
-	sky2_set_power_state(hw, pstate);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
 	return 0;
 }
 
@@ -3609,21 +3704,22 @@ static int sky2_resume(struct pci_dev *pdev)
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
 	int i, err;
 
-	pci_restore_state(pdev);
-	pci_enable_wake(pdev, PCI_D0, 0);
-	sky2_set_power_state(hw, PCI_D0);
+	err = pci_set_power_state(pdev, PCI_D0);
+	if (err)
+		goto out;
 
-	err = sky2_reset(hw);
+	err = pci_restore_state(pdev);
 	if (err)
 		goto out;
 
+	pci_enable_wake(pdev, PCI_D0, 0);
+	sky2_reset(hw);
+
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
 		if (netif_running(dev)) {
-			netif_device_attach(dev);
-
 			err = sky2_up(dev);
 			if (err) {
 				printk(KERN_ERR PFX "%s: could not up: %d\n",
@@ -3636,11 +3732,43 @@ static int sky2_resume(struct pci_dev *pdev)
 
 	netif_poll_enable(hw->dev[0]);
 	sky2_idle_start(hw);
+	return 0;
 out:
+	dev_err(&pdev->dev, "resume failed (%d)\n", err);
+	pci_disable_device(pdev);
 	return err;
 }
 #endif
 
+static void sky2_shutdown(struct pci_dev *pdev)
+{
+	struct sky2_hw *hw = pci_get_drvdata(pdev);
+	int i, wol = 0;
+
+	del_timer_sync(&hw->idle_timer);
+	netif_poll_disable(hw->dev[0]);
+
+	for (i = 0; i < hw->ports; i++) {
+		struct net_device *dev = hw->dev[i];
+		struct sky2_port *sky2 = netdev_priv(dev);
+
+		if (sky2->wol) {
+			wol = 1;
+			sky2_wol_init(sky2);
+		}
+	}
+
+	if (wol)
+		sky2_power_aux(hw);
+
+	pci_enable_wake(pdev, PCI_D3hot, wol);
+	pci_enable_wake(pdev, PCI_D3cold, wol);
+
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+}
+
 static struct pci_driver sky2_driver = {
 	.name = DRV_NAME,
 	.id_table = sky2_id_table,
@@ -3650,6 +3778,7 @@ static struct pci_driver sky2_driver = {
 	.suspend = sky2_suspend,
 	.resume = sky2_resume,
 #endif
+	.shutdown = sky2_shutdown,
 };
 
 static int __init sky2_init_module(void)