summaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-10-28 14:20:44 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-10-28 14:20:44 -0700
commit0e59e7e7feb5a12938fbf9135147eeda3238c6c4 (patch)
treedbe994369ca9cad6893f0fd710f75791bc84b816 /drivers/pci
parent46b51ea2099fa2082342e52b8284aa828429b80b (diff)
parenta513a99a7cebfb452839cc09c9c0586f72d96414 (diff)
Merge branch 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
* 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: Clean-up MPS debug output pci: Clamp pcie_set_readrq() when using "performance" settings PCI: enable MPS "performance" setting to properly handle bridge MPS PCI: Workaround for Intel MPS errata PCI: Add support for PASID capability PCI: Add implementation for PRI capability PCI: Export ATS functions to modules PCI: Move ATS implementation into own file PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake() PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove PCI / PM: Extend PME polling to all PCI devices PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823 PCI: Make pci_setup_bridge() non-static for use by arch code x86: constify PCI raw ops structures PCI: Add quirk for known incorrect MPSS PCI: Add Solarflare vendor ID and SFC4000 device IDs
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/Kconfig26
-rw-r--r--drivers/pci/Makefile1
-rw-r--r--drivers/pci/ats.c438
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c109
-rw-r--r--drivers/pci/iov.c142
-rw-r--r--drivers/pci/pci-acpi.c6
-rw-r--r--drivers/pci/pci.c59
-rw-r--r--drivers/pci/pcie/pme.c9
-rw-r--r--drivers/pci/probe.c68
-rw-r--r--drivers/pci/quirks.c111
-rw-r--r--drivers/pci/setup-bus.c2
11 files changed, 737 insertions, 234 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 0fa466a91bf4..cec66064ee4b 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -71,9 +71,13 @@ config HT_IRQ
If unsure say Y.
+config PCI_ATS
+ bool
+
config PCI_IOV
bool "PCI IOV support"
depends on PCI
+ select PCI_ATS
help
I/O Virtualization is a PCI feature supported by some devices
which allows them to create virtual devices which share their
@@ -81,6 +85,28 @@ config PCI_IOV
If unsure, say N.
+config PCI_PRI
+ bool "PCI PRI support"
+ select PCI_ATS
+ help
+ PRI is the PCI Page Request Interface. It allows PCI devices that are
+ behind an IOMMU to recover from page faults.
+
+ If unsure, say N.
+
+config PCI_PASID
+ bool "PCI PASID support"
+ depends on PCI
+ select PCI_ATS
+ help
+ Process Address Space Identifiers (PASIDs) can be used by PCI devices
+ to access more than one IO address space at the same time. To make
+ use of this feature an IOMMU is required which also supports PASIDs.
+ Select this option if you have such an IOMMU and want to compile the
+ driver for it into your kernel.
+
+ If unsure, say N.
+
config PCI_IOAPIC
bool
depends on PCI
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 6fadae3ad134..083a49fee56a 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_PCI_MSI) += msi.o
# Build the Hypertransport interrupt support
obj-$(CONFIG_HT_IRQ) += htirq.o
+obj-$(CONFIG_PCI_ATS) += ats.o
obj-$(CONFIG_PCI_IOV) += iov.o
#
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
new file mode 100644
index 000000000000..f727a09eb72f
--- /dev/null
+++ b/drivers/pci/ats.c
@@ -0,0 +1,438 @@
+/*
+ * drivers/pci/ats.c
+ *
+ * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
+ * Copyright (C) 2011 Advanced Micro Devices,
+ *
+ * PCI Express I/O Virtualization (IOV) support.
+ * Address Translation Service 1.0
+ * Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
+ * PASID support added by Joerg Roedel <joerg.roedel@amd.com>
+ */
+
+#include <linux/pci-ats.h>
+#include <linux/pci.h>
+
+#include "pci.h"
+
+static int ats_alloc_one(struct pci_dev *dev, int ps)
+{
+ int pos;
+ u16 cap;
+ struct pci_ats *ats;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
+ if (!pos)
+ return -ENODEV;
+
+ ats = kzalloc(sizeof(*ats), GFP_KERNEL);
+ if (!ats)
+ return -ENOMEM;
+
+ ats->pos = pos;
+ ats->stu = ps;
+ pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
+ ats->qdep = PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
+ PCI_ATS_MAX_QDEP;
+ dev->ats = ats;
+
+ return 0;
+}
+
+static void ats_free_one(struct pci_dev *dev)
+{
+ kfree(dev->ats);
+ dev->ats = NULL;
+}
+
+/**
+ * pci_enable_ats - enable the ATS capability
+ * @dev: the PCI device
+ * @ps: the IOMMU page shift
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+int pci_enable_ats(struct pci_dev *dev, int ps)
+{
+ int rc;
+ u16 ctrl;
+
+ BUG_ON(dev->ats && dev->ats->is_enabled);
+
+ if (ps < PCI_ATS_MIN_STU)
+ return -EINVAL;
+
+ if (dev->is_physfn || dev->is_virtfn) {
+ struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
+
+ mutex_lock(&pdev->sriov->lock);
+ if (pdev->ats)
+ rc = pdev->ats->stu == ps ? 0 : -EINVAL;
+ else
+ rc = ats_alloc_one(pdev, ps);
+
+ if (!rc)
+ pdev->ats->ref_cnt++;
+ mutex_unlock(&pdev->sriov->lock);
+ if (rc)
+ return rc;
+ }
+
+ if (!dev->is_physfn) {
+ rc = ats_alloc_one(dev, ps);
+ if (rc)
+ return rc;
+ }
+
+ ctrl = PCI_ATS_CTRL_ENABLE;
+ if (!dev->is_virtfn)
+ ctrl |= PCI_ATS_CTRL_STU(ps - PCI_ATS_MIN_STU);
+ pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
+
+ dev->ats->is_enabled = 1;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_enable_ats);
+
+/**
+ * pci_disable_ats - disable the ATS capability
+ * @dev: the PCI device
+ */
+void pci_disable_ats(struct pci_dev *dev)
+{
+ u16 ctrl;
+
+ BUG_ON(!dev->ats || !dev->ats->is_enabled);
+
+ pci_read_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, &ctrl);
+ ctrl &= ~PCI_ATS_CTRL_ENABLE;
+ pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
+
+ dev->ats->is_enabled = 0;
+
+ if (dev->is_physfn || dev->is_virtfn) {
+ struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
+
+ mutex_lock(&pdev->sriov->lock);
+ pdev->ats->ref_cnt--;
+ if (!pdev->ats->ref_cnt)
+ ats_free_one(pdev);
+ mutex_unlock(&pdev->sriov->lock);
+ }
+
+ if (!dev->is_physfn)
+ ats_free_one(dev);
+}
+EXPORT_SYMBOL_GPL(pci_disable_ats);
+
+/**
+ * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
+ * @dev: the PCI device
+ *
+ * Returns the queue depth on success, or negative on failure.
+ *
+ * The ATS spec uses 0 in the Invalidate Queue Depth field to
+ * indicate that the function can accept 32 Invalidate Request.
+ * But here we use the `real' values (i.e. 1~32) for the Queue
+ * Depth; and 0 indicates the function shares the Queue with
+ * other functions (doesn't exclusively own a Queue).
+ */
+int pci_ats_queue_depth(struct pci_dev *dev)
+{
+ int pos;
+ u16 cap;
+
+ if (dev->is_virtfn)
+ return 0;
+
+ if (dev->ats)
+ return dev->ats->qdep;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
+ if (!pos)
+ return -ENODEV;
+
+ pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
+
+ return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
+ PCI_ATS_MAX_QDEP;
+}
+EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
+
+#ifdef CONFIG_PCI_PRI
+/**
+ * pci_enable_pri - Enable PRI capability
+ * @ pdev: PCI device structure
+ *
+ * Returns 0 on success, negative value on error
+ */
+int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
+{
+ u16 control, status;
+ u32 max_requests;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ pci_read_config_word(pdev, pos + PCI_PRI_STATUS_OFF, &status);
+ if ((control & PCI_PRI_ENABLE) || !(status & PCI_PRI_STATUS_STOPPED))
+ return -EBUSY;
+
+ pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ_OFF, &max_requests);
+ reqs = min(max_requests, reqs);
+ pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ_OFF, reqs);
+
+ control |= PCI_PRI_ENABLE;
+ pci_write_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, control);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_enable_pri);
+
+/**
+ * pci_disable_pri - Disable PRI capability
+ * @pdev: PCI device structure
+ *
+ * Only clears the enabled-bit, regardless of its former value
+ */
+void pci_disable_pri(struct pci_dev *pdev)
+{
+ u16 control;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ control &= ~PCI_PRI_ENABLE;
+ pci_write_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, control);
+}
+EXPORT_SYMBOL_GPL(pci_disable_pri);
+
+/**
+ * pci_pri_enabled - Checks if PRI capability is enabled
+ * @pdev: PCI device structure
+ *
+ * Returns true if PRI is enabled on the device, false otherwise
+ */
+bool pci_pri_enabled(struct pci_dev *pdev)
+{
+ u16 control;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return false;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+
+ return (control & PCI_PRI_ENABLE) ? true : false;
+}
+EXPORT_SYMBOL_GPL(pci_pri_enabled);
+
+/**
+ * pci_reset_pri - Resets device's PRI state
+ * @pdev: PCI device structure
+ *
+ * The PRI capability must be disabled before this function is called.
+ * Returns 0 on success, negative value on error.
+ */
+int pci_reset_pri(struct pci_dev *pdev)
+{
+ u16 control;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ if (control & PCI_PRI_ENABLE)
+ return -EBUSY;
+
+ control |= PCI_PRI_RESET;
+
+ pci_write_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, control);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_reset_pri);
+
+/**
+ * pci_pri_stopped - Checks whether the PRI capability is stopped
+ * @pdev: PCI device structure
+ *
+ * Returns true if the PRI capability on the device is disabled and the
+ * device has no outstanding PRI requests, false otherwise. The device
+ * indicates this via the STOPPED bit in the status register of the
+ * capability.
+ * The device internal state can be cleared by resetting the PRI state
+ * with pci_reset_pri(). This can force the capability into the STOPPED
+ * state.
+ */
+bool pci_pri_stopped(struct pci_dev *pdev)
+{
+ u16 control, status;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return true;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ pci_read_config_word(pdev, pos + PCI_PRI_STATUS_OFF, &status);
+
+ if (control & PCI_PRI_ENABLE)
+ return false;
+
+ return (status & PCI_PRI_STATUS_STOPPED) ? true : false;
+}
+EXPORT_SYMBOL_GPL(pci_pri_stopped);
+
+/**
+ * pci_pri_status - Request PRI status of a device
+ * @pdev: PCI device structure
+ *
+ * Returns negative value on failure, status on success. The status can
+ * be checked against status-bits. Supported bits are currently:
+ * PCI_PRI_STATUS_RF: Response failure
+ * PCI_PRI_STATUS_UPRGI: Unexpected Page Request Group Index
+ * PCI_PRI_STATUS_STOPPED: PRI has stopped
+ */
+int pci_pri_status(struct pci_dev *pdev)
+{
+ u16 status, control;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ pci_read_config_word(pdev, pos + PCI_PRI_STATUS_OFF, &status);
+
+ /* Stopped bit is undefined when enable == 1, so clear it */
+ if (control & PCI_PRI_ENABLE)
+ status &= ~PCI_PRI_STATUS_STOPPED;
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(pci_pri_status);
+#endif /* CONFIG_PCI_PRI */
+
+#ifdef CONFIG_PCI_PASID
+/**
+ * pci_enable_pasid - Enable the PASID capability
+ * @pdev: PCI device structure
+ * @features: Features to enable
+ *
+ * Returns 0 on success, negative value on error. This function checks
+ * whether the features are actually supported by the device and returns
+ * an error if not.
+ */
+int pci_enable_pasid(struct pci_dev *pdev, int features)
+{
+ u16 control, supported;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PASID_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PASID_CONTROL_OFF, &control);
+ pci_read_config_word(pdev, pos + PCI_PASID_CAP_OFF, &supported);
+
+ if (!(supported & PCI_PASID_ENABLE))
+ return -EINVAL;
+
+ supported &= PCI_PASID_EXEC | PCI_PASID_PRIV;
+
+ /* User wants to enable anything unsupported? */
+ if ((supported & features) != features)
+ return -EINVAL;
+
+ control = PCI_PASID_ENABLE | features;
+
+ pci_write_config_word(pdev, pos + PCI_PASID_CONTROL_OFF, control);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_enable_pasid);
+
+/**
+ * pci_disable_pasid - Disable the PASID capability
+ * @pdev: PCI device structure
+ *
+ */
+void pci_disable_pasid(struct pci_dev *pdev)
+{
+ u16 control = 0;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PASID_CAP);
+ if (!pos)
+ return;
+
+ pci_write_config_word(pdev, pos + PCI_PASID_CONTROL_OFF, control);
+}
+EXPORT_SYMBOL_GPL(pci_disable_pasid);
+
+/**
+ * pci_pasid_features - Check which PASID features are supported
+ * @pdev: PCI device structure
+ *
+ * Returns a negative value when no PASI capability is present.
+ * Otherwise is returns a bitmask with supported features. Current
+ * features reported are:
+ * PCI_PASID_ENABLE - PASID capability can be enabled
+ * PCI_PASID_EXEC - Execute permission supported
+ * PCI_PASID_PRIV - Priviledged mode supported
+ */
+int pci_pasid_features(struct pci_dev *pdev)
+{
+ u16 supported;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PASID_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PASID_CAP_OFF, &supported);
+
+ supported &= PCI_PASID_ENABLE | PCI_PASID_EXEC | PCI_PASID_PRIV;
+
+ return supported;
+}
+EXPORT_SYMBOL_GPL(pci_pasid_features);
+
+#define PASID_NUMBER_SHIFT 8
+#define PASID_NUMBER_MASK (0x1f << PASID_NUMBER_SHIFT)
+/**
+ * pci_max_pasid - Get maximum number of PASIDs supported by device
+ * @pdev: PCI device structure
+ *
+ * Returns negative value when PASID capability is not present.
+ * Otherwise it returns the numer of supported PASIDs.
+ */
+int pci_max_pasids(struct pci_dev *pdev)
+{
+ u16 supported;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PASID_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PASID_CAP_OFF, &supported);
+
+ supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT;
+
+ return (1 << supported);
+}
+EXPORT_SYMBOL_GPL(pci_max_pasids);
+#endif /* CONFIG_PCI_PASID */
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 220285760b68..596172b4ae95 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -48,6 +48,7 @@
#include <linux/pci-acpi.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
#include "../pci.h"
#include "acpiphp.h"
@@ -1149,15 +1150,35 @@ check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
return AE_OK ;
}
-/**
- * handle_hotplug_event_bridge - handle ACPI event on bridges
- * @handle: Notify()'ed acpi_handle
- * @type: Notify code
- * @context: pointer to acpiphp_bridge structure
- *
- * Handles ACPI event notification on {host,p2p} bridges.
- */
-static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context)
+struct acpiphp_hp_work {
+ struct work_struct work;
+ acpi_handle handle;
+ u32 type;
+ void *context;
+};
+
+static void alloc_acpiphp_hp_work(acpi_handle handle, u32 type,
+ void *context,
+ void (*func)(struct work_struct *work))
+{
+ struct acpiphp_hp_work *hp_work;
+ int ret;
+
+ hp_work = kmalloc(sizeof(*hp_work), GFP_KERNEL);
+ if (!hp_work)
+ return;
+
+ hp_work->handle = handle;
+ hp_work->type = type;
+ hp_work->context = context;
+
+ INIT_WORK(&hp_work->work, func);
+ ret = queue_work(kacpi_hotplug_wq, &hp_work->work);
+ if (!ret)
+ kfree(hp_work);
+}
+
+static void _handle_hotplug_event_bridge(struct work_struct *work)
{
struct acpiphp_bridge *bridge;
char objname[64];
@@ -1165,11 +1186,18 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
.pointer = objname };
struct acpi_device *device;
int num_sub_bridges = 0;
+ struct acpiphp_hp_work *hp_work;
+ acpi_handle handle;
+ u32 type;
+
+ hp_work = container_of(work, struct acpiphp_hp_work, work);
+ handle = hp_work->handle;
+ type = hp_work->type;
if (acpi_bus_get_device(handle, &device)) {
/* This bridge must have just been physically inserted */
handle_bridge_insertion(handle, type);
- return;
+ goto out;
}
bridge = acpiphp_handle_to_bridge(handle);
@@ -1180,7 +1208,7 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
if (!bridge && !num_sub_bridges) {
err("cannot get bridge info\n");
- return;
+ goto out;
}
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
@@ -1241,22 +1269,49 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
break;
}
+
+out:
+ kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
}
/**
- * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
+ * handle_hotplug_event_bridge - handle ACPI event on bridges
* @handle: Notify()'ed acpi_handle
* @type: Notify code
- * @context: pointer to acpiphp_func structure
+ * @context: pointer to acpiphp_bridge structure
*
- * Handles ACPI event notification on slots.
+ * Handles ACPI event notification on {host,p2p} bridges.
*/
-static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
+static void handle_hotplug_event_bridge(acpi_handle handle, u32 type,
+ void *context)
+{
+ /*
+ * Currently the code adds all hotplug events to the kacpid_wq
+ * queue when it should add hotplug events to the kacpi_hotplug_wq.
+ * The proper way to fix this is to reorganize the code so that
+ * drivers (dock, etc.) do not call acpi_os_execute(), etc.
+ * For now just re-add this work to the kacpi_hotplug_wq so we
+ * don't deadlock on hotplug actions.
+ */
+ alloc_acpiphp_hp_work(handle, type, context,
+ _handle_hotplug_event_bridge);
+}
+
+static void _handle_hotplug_event_func(struct work_struct *work)
{
struct acpiphp_func *func;
char objname[64];
struct acpi_buffer buffer = { .length = sizeof(objname),
.pointer = objname };
+ struct acpiphp_hp_work *hp_work;
+ acpi_handle handle;
+ u32 type;
+ void *context;
+
+ hp_work = container_of(work, struct acpiphp_hp_work, work);
+ handle = hp_work->handle;
+ type = hp_work->type;
+ context = hp_work->context;
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
@@ -1291,8 +1346,32 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *contex
warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
break;
}
+
+ kfree(hp_work); /* allocated in handle_hotplug_event_func */
}
+/**
+ * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
+ * @handle: Notify()'ed acpi_handle
+ * @type: Notify code
+ * @context: pointer to acpiphp_func structure
+ *
+ * Handles ACPI event notification on slots.
+ */
+static void handle_hotplug_event_func(acpi_handle handle, u32 type,
+ void *context)
+{
+ /*
+ * Currently the code adds all hotplug events to the kacpid_wq
+ * queue when it should add hotplug events to the kacpi_hotplug_wq.
+ * The proper way to fix this is to reorganize the code so that
+ * drivers (dock, etc.) do not call acpi_os_execute(), etc.
+ * For now just re-add this work to the kacpi_hotplug_wq so we
+ * don't deadlock on hotplug actions.
+ */
+ alloc_acpiphp_hp_work(handle, type, context,
+ _handle_hotplug_event_func);
+}
static acpi_status
find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 42fae4776515..9b4e88c636f8 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -722,145 +722,3 @@ int pci_num_vf(struct pci_dev *dev)
return dev->sriov->nr_virtfn;
}
EXPORT_SYMBOL_GPL(pci_num_vf);
-
-static int ats_alloc_one(struct pci_dev *dev, int ps)
-{
- int pos;
- u16 cap;
- struct pci_ats *ats;
-
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
- if (!pos)
- return -ENODEV;
-
- ats = kzalloc(sizeof(*ats), GFP_KERNEL);
- if (!ats)
- return -ENOMEM;
-
- ats->pos = pos;
- ats->stu = ps;
- pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
- ats->qdep = PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
- PCI_ATS_MAX_QDEP;
- dev->ats = ats;
-
- return 0;
-}
-
-static void ats_free_one(struct pci_dev *dev)
-{
- kfree(dev->ats);
- dev->ats = NULL;
-}
-
-/**
- * pci_enable_ats - enable the ATS capability
- * @dev: the PCI device
- * @ps: the IOMMU page shift
- *
- * Returns 0 on success, or negative on failure.
- */
-int pci_enable_ats(struct pci_dev *dev, int ps)
-{
- int rc;
- u16 ctrl;
-
- BUG_ON(dev->ats && dev->ats->is_enabled);
-
- if (ps < PCI_ATS_MIN_STU)
- return -EINVAL;
-
- if (dev->is_physfn || dev->is_virtfn) {
- struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
-
- mutex_lock(&pdev->sriov->lock);
- if (pdev->ats)
- rc = pdev->ats->stu == ps ? 0 : -EINVAL;
- else
- rc = ats_alloc_one(pdev, ps);
-
- if (!rc)
- pdev->ats->ref_cnt++;
- mutex_unlock(&pdev->sriov->lock);
- if (rc)
- return rc;
- }
-
- if (!dev->is_physfn) {
- rc = ats_alloc_one(dev, ps);
- if (rc)
- return rc;
- }
-
- ctrl = PCI_ATS_CTRL_ENABLE;
- if (!dev->is_virtfn)
- ctrl |= PCI_ATS_CTRL_STU(ps - PCI_ATS_MIN_STU);
- pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
-
- dev->ats->is_enabled = 1;
-
- return 0;
-}
-
-/**
- * pci_disable_ats - disable the ATS capability
- * @dev: the PCI device
- */
-void pci_disable_ats(struct pci_dev *dev)
-{
- u16 ctrl;
-
- BUG_ON(!dev->ats || !dev->ats->is_enabled);
-
- pci_read_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, &ctrl);
- ctrl &= ~PCI_ATS_CTRL_ENABLE;
- pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
-
- dev->ats->is_enabled = 0;
-
- if (dev->is_physfn || dev->is_virtfn) {
- struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
-
- mutex_lock(&pdev->sriov->lock);
- pdev->ats->ref_cnt--;
- if (!pdev->ats->ref_cnt)
- ats_free_one(pdev);
- mutex_unlock(&pdev->sriov->lock);
- }
-
- if (!dev->is_physfn)
- ats_free_one(dev);
-}
-
-/**
- * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
- * @dev: the PCI device
- *
- * Returns the queue depth on success, or negative on failure.
- *
- * The ATS spec uses 0 in the Invalidate Queue Depth field to
- * indicate that the function can accept 32 Invalidate Request.
- * But here we use the `real' values (i.e. 1~32) for the Queue
- * Depth; and 0 indicates the function shares the Queue with
- * other functions (doesn't exclusively own a Queue).
- */
-int pci_ats_queue_depth(struct pci_dev *dev)
-{
- int pos;
- u16 cap;
-
- if (dev->is_virtfn)
- return 0;
-
- if (dev->ats)
- return dev->ats->qdep;
-
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
- if (!pos)
- return -ENODEV;
-
- pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
-
- return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
- PCI_ATS_MAX_QDEP;
-}
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index d36f41ea8cbf..4ecb6408b0d6 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -46,6 +46,9 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
struct pci_dev *pci_dev = context;
if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
+ if (pci_dev->pme_poll)
+ pci_dev->pme_poll = false;
+
pci_wakeup_event(pci_dev);
pci_check_pme_status(pci_dev);
pm_runtime_resume(&pci_dev->dev);
@@ -282,7 +285,6 @@ static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
{
struct acpi_device *dev;
acpi_handle handle;
- int error = -ENODEV;
if (!device_run_wake(phys_dev))
return -EINVAL;
@@ -302,7 +304,7 @@ static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
acpi_disable_wakeup_device_power(dev);
}
- return error;
+ return 0;
}
static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e9651f0a8817..6f45a73c6e9f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1407,13 +1407,16 @@ bool pci_check_pme_status(struct pci_dev *dev)
/**
* pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
* @dev: Device to handle.
- * @ign: Ignored.
+ * @pme_poll_reset: Whether or not to reset the device's pme_poll flag.
*
* Check if @dev has generated PME and queue a resume request for it in that
* case.
*/
-static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
+static int pci_pme_wakeup(struct pci_dev *dev, void *pme_poll_reset)
{
+ if (pme_poll_reset && dev->pme_poll)
+ dev->pme_poll = false;
+
if (pci_check_pme_status(dev)) {
pci_wakeup_event(dev);
pm_request_resume(&dev->dev);
@@ -1428,7 +1431,7 @@ static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
void pci_pme_wakeup_bus(struct pci_bus *bus)
{
if (bus)
- pci_walk_bus(bus, pci_pme_wakeup, NULL);
+ pci_walk_bus(bus, pci_pme_wakeup, (void *)true);
}
/**
@@ -1446,31 +1449,26 @@ bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
static void pci_pme_list_scan(struct work_struct *work)
{
- struct pci_pme_device *pme_dev;
+ struct pci_pme_device *pme_dev, *n;
mutex_lock(&pci_pme_list_mutex);
if (!list_empty(&pci_pme_list)) {
- list_for_each_entry(pme_dev, &pci_pme_list, list)
- pci_pme_wakeup(pme_dev->dev, NULL);
- schedule_delayed_work(&pci_pme_work, msecs_to_jiffies(PME_TIMEOUT));
+ list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
+ if (pme_dev->dev->pme_poll) {
+ pci_pme_wakeup(pme_dev->dev, NULL);
+ } else {
+ list_del(&pme_dev->list);
+ kfree(pme_dev);
+ }
+ }
+ if (!list_empty(&pci_pme_list))
+ schedule_delayed_work(&pci_pme_work,
+ msecs_to_jiffies(PME_TIMEOUT));
}
mutex_unlock(&pci_pme_list_mutex);
}
/**
- * pci_external_pme - is a device an external PCI PME source?
- * @dev: PCI device to check
- *
- */
-
-static bool pci_external_pme(struct pci_dev *dev)
-{
- if (pci_is_pcie(dev) || dev->bus->number == 0)
- return false;
- return true;
-}
-
-/**
* pci_pme_active - enable or disable PCI device's PME# function
* @dev: PCI device to handle.
* @enable: 'true' to enable PME# generation; 'false' to disable it.
@@ -1503,7 +1501,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
hit, and the power savings from the devices will still be a
win. */
- if (pci_external_pme(dev)) {
+ if (dev->pme_poll) {
struct pci_pme_device *pme_dev;
if (enable) {
pme_dev = kmalloc(sizeof(struct pci_pme_device),
@@ -1821,6 +1819,7 @@ void pci_pm_init(struct pci_dev *dev)
(pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
(pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
+ dev->pme_poll = true;
/*
* Make device's PM flags reflect the wake-up capability, but
* let the user space enable it to wake up the system as needed.
@@ -3203,8 +3202,6 @@ int pcie_set_readrq(struct pci_dev *dev, int rq)
if (rq < 128 || rq > 4096 || !is_power_of_2(rq))
goto out;
- v = (ffs(rq) - 8) << 12;
-
cap = pci_pcie_cap(dev);
if (!cap)
goto out;
@@ -3212,6 +3209,22 @@ int pcie_set_readrq(struct pci_dev *dev, int rq)
err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
if (err)
goto out;
+ /*
+ * If using the "performance" PCIe config, we clamp the
+ * read rq size to the max packet size to prevent the
+ * host bridge generating requests larger than we can
+ * cope with
+ */
+ if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
+ int mps = pcie_get_mps(dev);
+
+ if (mps < 0)
+ return mps;
+ if (mps < rq)
+ rq = mps;
+ }
+
+ v = (ffs(rq) - 8) << 12;
if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
ctl &= ~PCI_EXP_DEVCTL_READRQ;
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 0057344a3fcb..001f1b78f39c 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -84,6 +84,9 @@ static bool pcie_pme_walk_bus(struct pci_bus *bus)
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Skip PCIe devices in case we started from a root port. */
if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
+ if (dev->pme_poll)
+ dev->pme_poll = false;
+
pci_wakeup_event(dev);
pm_request_resume(&dev->dev);
ret = true;
@@ -142,6 +145,9 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
/* First, check if the PME is from the root port itself. */
if (port->devfn == devfn && port->bus->number == busnr) {
+ if (port->pme_poll)
+ port->pme_poll = false;
+
if (pci_check_pme_status(port)) {
pm_request_resume(&port->dev);
found = true;
@@ -187,6 +193,9 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
/* The device is there, but we have to check its PME status. */
found = pci_check_pme_status(dev);
if (found) {
+ if (dev->pme_poll)
+ dev->pme_poll = false;
+
pci_wakeup_event(dev);
pm_request_resume(&dev->dev);
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6ab6bd3df4b2..04e74f485714 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1363,31 +1363,25 @@ static int pcie_find_smpss(struct pci_dev *dev, void *data)
static void pcie_write_mps(struct pci_dev *dev, int mps)
{
- int rc, dev_mpss;
-
- dev_mpss = 128 << dev->pcie_mpss;
+ int rc;
if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
- if (dev->bus->self) {
- dev_dbg(&dev->bus->dev, "Bus MPSS %d\n",
- 128 << dev->bus->self->pcie_mpss);
+ mps = 128 << dev->pcie_mpss;
- /* For "MPS Force Max", the assumption is made that
+ if (dev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && dev->bus->self)
+ /* For "Performance", the assumption is made that
* downstream communication will never be larger than
* the MRRS. So, the MPS only needs to be configured
* for the upstream communication. This being the case,
* walk from the top down and set the MPS of the child
* to that of the parent bus.
+ *
+ * Configure the device MPS with the smaller of the
+ * device MPSS or the bridge MPS (which is assumed to be
+ * properly configured at this point to the largest
+ * allowable MPS based on its parent bus).
*/
- mps = 128 << dev->bus->self->pcie_mpss;
- if (mps > dev_mpss)
- dev_warn(&dev->dev, "MPS configured higher than"
- " maximum supported by the device. If"
- " a bus issue occurs, try running with"
- " pci=pcie_bus_safe.\n");
- }
-
- dev->pcie_mpss = ffs(mps) - 8;
+ mps = min(mps, pcie_get_mps(dev->bus->self));
}
rc = pcie_set_mps(dev, mps);
@@ -1395,25 +1389,22 @@ static void pcie_write_mps(struct pci_dev *dev, int mps)
dev_err(&dev->dev, "Failed attempting to set the MPS\n");
}
-static void pcie_write_mrrs(struct pci_dev *dev, int mps)
+static void pcie_write_mrrs(struct pci_dev *dev)
{
- int rc, mrrs, dev_mpss;
+ int rc, mrrs;
/* In the "safe" case, do not configure the MRRS. There appear to be
* issues with setting MRRS to 0 on a number of devices.
*/
-
if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
return;
- dev_mpss = 128 << dev->pcie_mpss;
-
/* For Max performance, the MRRS must be set to the largest supported
* value. However, it cannot be configured larger than the MPS the
- * device or the bus can support. This assumes that the largest MRRS
- * available on the device cannot be smaller than the device MPSS.
+ * device or the bus can support. This should already be properly
+ * configured by a prior call to pcie_write_mps.
*/
- mrrs = min(mps, dev_mpss);
+ mrrs = pcie_get_mps(dev);
/* MRRS is a R/W register. Invalid values can be written, but a
* subsequent read will verify if the value is acceptable or not.
@@ -1421,38 +1412,41 @@ static void pcie_write_mrrs(struct pci_dev *dev, int mps)
* shrink the value until it is acceptable to the HW.
*/
while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
- dev_warn(&dev->dev, "Attempting to modify the PCI-E MRRS value"
- " to %d. If any issues are encountered, please try "
- "running with pci=pcie_bus_safe\n", mrrs);
rc = pcie_set_readrq(dev, mrrs);
- if (rc)
- dev_err(&dev->dev,
- "Failed attempting to set the MRRS\n");
+ if (!rc)
+ break;
+ dev_warn(&dev->dev, "Failed attempting to set the MRRS\n");
mrrs /= 2;
}
+
+ if (mrrs < 128)
+ dev_err(&dev->dev, "MRRS was unable to be configured with a "
+ "safe value. If problems are experienced, try running "
+ "with pci=pcie_bus_safe.\n");
}
static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
{
- int mps = 128 << *(u8 *)data;
+ int mps, orig_mps;
if (!pci_is_pcie(dev))
return 0;
- dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
- pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
+ mps = 128 << *(u8 *)data;
+ orig_mps = pcie_get_mps(dev);
pcie_write_mps(dev, mps);
- pcie_write_mrrs(dev, mps);
+ pcie_write_mrrs(dev);
- dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
- pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
+ dev_info(&dev->dev, "PCI-E Max Payload Size set to %4d/%4d (was %4d), "
+ "Max Read Rq %4d\n", pcie_get_mps(dev), 128 << dev->pcie_mpss,
+ orig_mps, pcie_get_readrq(dev));
return 0;
}
-/* pcie_bus_configure_mps requires that pci_walk_bus work in a top-down,
+/* pcie_bus_configure_settings requires that pci_walk_bus work in a top-down,
* parents then children fashion. If this changes, then this code will not
* work as designed.
*/
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b23856aaf6eb..7285145ac1c9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2745,20 +2745,6 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
/* disable must be done via function #0 */
if (PCI_FUNC(dev->devfn))
return;
-
- pci_read_config_byte(dev, 0xCB, &disable);
-
- if (disable & 0x02)
- return;
-
- pci_read_config_byte(dev, 0xCA, &write_enable);
- pci_write_config_byte(dev, 0xCA, 0x57);
- pci_write_config_byte(dev, 0xCB, disable | 0x02);
- pci_write_config_byte(dev, 0xCA, write_enable);
-
- dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
- dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
-
/*
* RICOH 0xe823 SD/MMC card reader fails to recognize
* certain types of SD/MMC cards. Lowering the SD base
@@ -2781,6 +2767,20 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
}
+
+ pci_read_config_byte(dev, 0xCB, &disable);
+
+ if (disable & 0x02)
+ return;
+
+ pci_read_config_byte(dev, 0xCA, &write_enable);
+ pci_write_config_byte(dev, 0xCA, 0x57);
+ pci_write_config_byte(dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(dev, 0xCA, write_enable);
+
+ dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+ dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
@@ -2822,6 +2822,89 @@ static void __devinit fixup_ti816x_class(struct pci_dev* dev)
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class);
+/* Some PCIe devices do not work reliably with the claimed maximum
+ * payload size supported.
+ */
+static void __devinit fixup_mpss_256(struct pci_dev *dev)
+{
+ dev->pcie_mpss = 1; /* 256 bytes */
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+
+/* Intel 5000 and 5100 Memory controllers have an errata with read completion
+ * coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
+ * Since there is no way of knowing what the PCIE MPS on each fabric will be
+ * until all of the devices are discovered and buses walked, read completion
+ * coalescing must be disabled. Unfortunately, it cannot be re-enabled because
+ * it is possible to hotplug a device with MPS of 256B.
+ */
+static void __devinit quirk_intel_mc_errata(struct pci_dev *dev)
+{
+ int err;
+ u16 rcc;
+
+ if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
+ return;
+
+ /* Intel errata specifies bits to change but does not say what they are.
+ * Keeping them magical until such time as the registers and values can
+ * be explained.
+ */
+ err = pci_read_config_word(dev, 0x48, &rcc);
+ if (err) {
+ dev_err(&dev->dev, "Error attempting to read the read "
+ "completion coalescing register.\n");
+ return;
+ }
+
+ if (!(rcc & (1 << 10)))
+ return;
+
+ rcc &= ~(1 << 10);
+
+ err = pci_write_config_word(dev, 0x48, rcc);
+ if (err) {
+ dev_err(&dev->dev, "Error attempting to write the read "
+ "completion coalescing register.\n");
+ return;
+ }
+
+ pr_info_once("Read completion coalescing disabled due to hardware "
+ "errata relating to 256B MPS.\n");
+}
+/* Intel 5000 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata);
+/* Intel 5100 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 784da9d36029..86b69f85f900 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -426,7 +426,7 @@ static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
-static void pci_setup_bridge(struct pci_bus *bus)
+void pci_setup_bridge(struct pci_bus *bus)
{
unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;