summaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
authorKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>2006-05-12 11:11:48 +0900
committerGreg Kroah-Hartman <gregkh@suse.de>2006-06-19 14:13:24 -0700
commit4085399da3c2176ba8ed64e93a2722907d41df3f (patch)
treefc923b10c70ededacf661b21285d852a8da8d886 /drivers/pci
parentc4cecc1937cafd8505151452a9f7eea876a5bd9c (diff)
[PATCH] shpchp: Cleanup SHPC commands
This patch cleans up the code related to issuing SHPC commands. This patch has no functional changes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c98
1 files changed, 48 insertions, 50 deletions
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index e0f8c1bbaf12..f6b3bf3ee7ca 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -147,39 +147,37 @@
#define CON_PFAULT_SERR_MASK (1 << 30)
#define SLOT_REG_RSVDZ_MASK (1 << 15) | (7 << 21)
-/* SHPC 'write' operations/commands */
-
-/* Slot operation - 0x00h to 0x3Fh */
-
-#define NO_CHANGE 0x00
-
-/* Slot state - Bits 0 & 1 of controller command register */
-#define SET_SLOT_PWR 0x01
-#define SET_SLOT_ENABLE 0x02
-#define SET_SLOT_DISABLE 0x03
-
-/* Power indicator state - Bits 2 & 3 of controller command register*/
-#define SET_PWR_ON 0x04
-#define SET_PWR_BLINK 0x08
-#define SET_PWR_OFF 0x0C
-
-/* Attention indicator state - Bits 4 & 5 of controller command register*/
-#define SET_ATTN_ON 0x010
-#define SET_ATTN_BLINK 0x020
-#define SET_ATTN_OFF 0x030
-
-/* Set bus speed/mode A - 0x40h to 0x47h */
-#define SETA_PCI_33MHZ 0x40
+/*
+ * SHPC Command Code definitnions
+ *
+ * Slot Operation 00h - 3Fh
+ * Set Bus Segment Speed/Mode A 40h - 47h
+ * Power-Only All Slots 48h
+ * Enable All Slots 49h
+ * Set Bus Segment Speed/Mode B (PI=2) 50h - 5Fh
+ * Reserved Command Codes 60h - BFh
+ * Vendor Specific Commands C0h - FFh
+ */
+#define SET_SLOT_PWR 0x01 /* Slot Operation */
+#define SET_SLOT_ENABLE 0x02
+#define SET_SLOT_DISABLE 0x03
+#define SET_PWR_ON 0x04
+#define SET_PWR_BLINK 0x08
+#define SET_PWR_OFF 0x0c
+#define SET_ATTN_ON 0x10
+#define SET_ATTN_BLINK 0x20
+#define SET_ATTN_OFF 0x30
+#define SETA_PCI_33MHZ 0x40 /* Set Bus Segment Speed/Mode A */
#define SETA_PCI_66MHZ 0x41
#define SETA_PCIX_66MHZ 0x42
#define SETA_PCIX_100MHZ 0x43
#define SETA_PCIX_133MHZ 0x44
-#define RESERV_1 0x45
-#define RESERV_2 0x46
-#define RESERV_3 0x47
-
-/* Set bus speed/mode B - 0x50h to 0x5fh */
-#define SETB_PCI_33MHZ 0x50
+#define SETA_RESERVED1 0x45
+#define SETA_RESERVED2 0x46
+#define SETA_RESERVED3 0x47
+#define SET_PWR_ONLY_ALL 0x48 /* Power-Only All Slots */
+#define SET_ENABLE_ALL 0x49 /* Enable All Slots */
+#define SETB_PCI_33MHZ 0x50 /* Set Bus Segment Speed/Mode B */
#define SETB_PCI_66MHZ 0x51
#define SETB_PCIX_66MHZ_PM 0x52
#define SETB_PCIX_100MHZ_PM 0x53
@@ -193,23 +191,21 @@
#define SETB_PCIX_66MHZ_533 0x5b
#define SETB_PCIX_100MHZ_533 0x5c
#define SETB_PCIX_133MHZ_533 0x5d
+#define SETB_RESERVED1 0x5e
+#define SETB_RESERVED2 0x5f
-
-/* Power-on all slots - 0x48h */
-#define SET_PWR_ON_ALL 0x48
-
-/* Enable all slots - 0x49h */
-#define SET_ENABLE_ALL 0x49
-
-/* SHPC controller command error code */
+/*
+ * SHPC controller command error code
+ */
#define SWITCH_OPEN 0x1
#define INVALID_CMD 0x2
#define INVALID_SPEED_MODE 0x4
-/* For accessing SHPC Working Register Set */
+/*
+ * For accessing SHPC Working Register Set via PCI Configuration Space
+ */
#define DWORD_SELECT 0x2
#define DWORD_DATA 0x4
-#define BASE_OFFSET 0x0
/* Field Offset in Logical Slot Register - byte boundary */
#define SLOT_EVENT_LATCH 0x2
@@ -630,13 +626,13 @@ static int hpc_set_attention_status(struct slot *slot, u8 value)
switch (value) {
case 0 :
- slot_cmd = 0x30; /* OFF */
+ slot_cmd = SET_ATTN_OFF; /* OFF */
break;
case 1:
- slot_cmd = 0x10; /* ON */
+ slot_cmd = SET_ATTN_ON; /* ON */
break;
case 2:
- slot_cmd = 0x20; /* BLINK */
+ slot_cmd = SET_ATTN_BLINK; /* BLINK */
break;
default:
return -1;
@@ -648,17 +644,17 @@ static int hpc_set_attention_status(struct slot *slot, u8 value)
static void hpc_set_green_led_on(struct slot *slot)
{
- shpc_write_cmd(slot, slot->hp_slot, 0x04);
+ shpc_write_cmd(slot, slot->hp_slot, SET_PWR_ON);
}
static void hpc_set_green_led_off(struct slot *slot)
{
- shpc_write_cmd(slot, slot->hp_slot, 0x0c);
+ shpc_write_cmd(slot, slot->hp_slot, SET_PWR_OFF);
}
static void hpc_set_green_led_blink(struct slot *slot)
{
- shpc_write_cmd(slot, slot->hp_slot, 0x08);
+ shpc_write_cmd(slot, slot->hp_slot, SET_PWR_BLINK);
}
int shpc_get_ctlr_slot_config(struct controller *ctrl,
@@ -769,7 +765,7 @@ static int hpc_power_on_slot(struct slot * slot)
DBG_ENTER_ROUTINE
- retval = shpc_write_cmd(slot, slot->hp_slot, 0x01);
+ retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR);
if (retval) {
err("%s: Write command failed!\n", __FUNCTION__);
return retval;
@@ -786,8 +782,9 @@ static int hpc_slot_enable(struct slot * slot)
DBG_ENTER_ROUTINE
- /* 3A => Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */
- retval = shpc_write_cmd(slot, slot->hp_slot, 0x3a);
+ /* Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */
+ retval = shpc_write_cmd(slot, slot->hp_slot,
+ SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF);
if (retval) {
err("%s: Write command failed!\n", __FUNCTION__);
return retval;
@@ -803,8 +800,9 @@ static int hpc_slot_disable(struct slot * slot)
DBG_ENTER_ROUTINE
- /* 1F => Slot - Disable, Power Indicator - Off, Attention Indicator - On */
- retval = shpc_write_cmd(slot, slot->hp_slot, 0x1f);
+ /* Slot - Disable, Power Indicator - Off, Attention Indicator - On */
+ retval = shpc_write_cmd(slot, slot->hp_slot,
+ SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON);
if (retval) {
err("%s: Write command failed!\n", __FUNCTION__);
return retval;