Merge 4.4.97 into android-4.4

Changes in 4.4.97
	ALSA: timer: Add missing mutex lock for compat ioctls
	ALSA: seq: Fix nested rwsem annotation for lockdep splat
	cifs: check MaxPathNameComponentLength != 0 before using it
	KEYS: return full count in keyring_read() if buffer is too small
	KEYS: fix out-of-bounds read during ASN.1 parsing
	ASoC: adau17x1: Workaround for noise bug in ADC
	arm64: ensure __dump_instr() checks addr_limit
	ARM: dts: mvebu: pl310-cache disable double-linefill
	ARM: 8715/1: add a private asm/unaligned.h
	ocfs2: fstrim: Fix start offset of first cluster group during fstrim
	perf tools: Fix build failure on perl script context
	drm/msm: Fix potential buffer overflow issue
	drm/msm: fix an integer overflow test
	tracing/samples: Fix creation and deletion of simple_thread_fn creation
	Fix tracing sample code warning.
	PM / wakeirq: report a wakeup_event on dedicated wekup irq
	mmc: s3cmci: include linux/interrupt.h for tasklet_struct
	ARM: pxa: Don't rely on public mmc header to include leds.h
	mfd: ab8500-sysctrl: Handle probe deferral
	mfd: axp20x: Fix axp288 PEK_DBR and PEK_DBF irqs being swapped
	staging: rtl8712u: Fix endian settings for structs describing network packets
	ext4: fix stripe-unaligned allocations
	ext4: do not use stripe_width if it is not set
	i2c: riic: correctly finish transfers
	drm/amdgpu: when dpm disabled, also need to stop/start vce.
	perf tools: Only increase index if perf_evsel__new_idx() succeeds
	cx231xx: Fix I2C on Internal Master 3 Bus
	xen/manage: correct return value check on xenbus_scanf()
	scsi: aacraid: Process Error for response I/O
	platform/x86: intel_mid_thermal: Fix module autoload
	staging: lustre: llite: don't invoke direct_IO for the EOF case
	staging: lustre: hsm: stack overrun in hai_dump_data_field
	staging: lustre: ptlrpc: skip lock if export failed
	exynos4-is: fimc-is: Unmap region obtained by of_iomap()
	mei: return error on notification request to a disconnected client
	s390/dasd: check for device error pointer within state change interrupts
	bt8xx: fix memory leak
	xen: don't print error message in case of missing Xenstore entry
	staging: r8712u: Fix Sparse warning in rtl871x_xmit.c
	Linux 4.4.97

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

21 files changed, 316 insertions, 229 deletions

diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c
index 404d94c6c8bc..feba1b211898 100644
--- a/drivers/base/power/wakeirq.c
+++ b/drivers/base/power/wakeirq.c
@@ -141,6 +141,13 @@ static irqreturn_t handle_threaded_wake_irq(int irq, void *_wirq)
 	struct wake_irq *wirq = _wirq;
 	int res;
 
+	/* Maybe abort suspend? */
+	if (irqd_is_wakeup_set(irq_get_irq_data(irq))) {
+		pm_wakeup_event(wirq->dev, 0);
+
+		return IRQ_HANDLED;
+	}
+
 	/* We don't want RPM_ASYNC or RPM_NOWAIT here */
 	res = pm_runtime_resume(wirq->dev);
 	if (res < 0)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c
index bb0da76051a1..e5da6f19b9b8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c
@@ -284,6 +284,10 @@ static void amdgpu_vce_idle_work_handler(struct work_struct *work)
 			amdgpu_dpm_enable_vce(adev, false);
 		} else {
 			amdgpu_asic_set_vce_clocks(adev, 0, 0);
+			amdgpu_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_VCE,
+							    AMD_PG_STATE_GATE);
+			amdgpu_set_clockgating_state(adev, AMD_IP_BLOCK_TYPE_VCE,
+							    AMD_CG_STATE_GATE);
 		}
 	} else {
 		schedule_delayed_work(&adev->vce.idle_work,
@@ -315,6 +319,11 @@ static void amdgpu_vce_note_usage(struct amdgpu_device *adev)
 			amdgpu_dpm_enable_vce(adev, true);
 		} else {
 			amdgpu_asic_set_vce_clocks(adev, 53300, 40000);
+			amdgpu_set_clockgating_state(adev, AMD_IP_BLOCK_TYPE_VCE,
+							    AMD_CG_STATE_UNGATE);
+			amdgpu_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_VCE,
+							    AMD_PG_STATE_UNGATE);
+
 		}
 	}
 }
diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c
index fed44d4e5b72..f4eaccb191d4 100644
--- a/drivers/gpu/drm/msm/msm_gem_submit.c
+++ b/drivers/gpu/drm/msm/msm_gem_submit.c
@@ -34,10 +34,13 @@ static inline void __user *to_user_ptr(u64 address)
 }
 
 static struct msm_gem_submit *submit_create(struct drm_device *dev,
-		struct msm_gpu *gpu, int nr)
+		struct msm_gpu *gpu, uint32_t nr)
 {
 	struct msm_gem_submit *submit;
-	int sz = sizeof(*submit) + (nr * sizeof(submit->bos[0]));
+	uint64_t sz = sizeof(*submit) + ((u64)nr * sizeof(submit->bos[0]));
+
+	if (sz > SIZE_MAX)
+		return NULL;
 
 	submit = kmalloc(sz, GFP_TEMPORARY | __GFP_NOWARN | __GFP_NORETRY);
 	if (submit) {
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index d7e3af671543..d8803c3bbfdc 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -80,6 +80,7 @@
 #define ICIER_TEIE	0x40
 #define ICIER_RIE	0x20
 #define ICIER_NAKIE	0x10
+#define ICIER_SPIE	0x08
 
 #define ICSR2_NACKF	0x10
 
@@ -216,11 +217,10 @@ static irqreturn_t riic_tend_isr(int irq, void *data)
 		return IRQ_NONE;
 	}
 
-	if (riic->is_last || riic->err)
+	if (riic->is_last || riic->err) {
+		riic_clear_set_bit(riic, 0, ICIER_SPIE, RIIC_ICIER);
 		writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
-
-	writeb(0, riic->base + RIIC_ICIER);
-	complete(&riic->msg_done);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -240,13 +240,13 @@ static irqreturn_t riic_rdrf_isr(int irq, void *data)
 
 	if (riic->bytes_left == 1) {
 		/* STOP must come before we set ACKBT! */
-		if (riic->is_last)
+		if (riic->is_last) {
+			riic_clear_set_bit(riic, 0, ICIER_SPIE, RIIC_ICIER);
 			writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
+		}
 
 		riic_clear_set_bit(riic, 0, ICMR3_ACKBT, RIIC_ICMR3);
 
-		writeb(0, riic->base + RIIC_ICIER);
-		complete(&riic->msg_done);
 	} else {
 		riic_clear_set_bit(riic, ICMR3_ACKBT, 0, RIIC_ICMR3);
 	}
@@ -259,6 +259,21 @@ static irqreturn_t riic_rdrf_isr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t riic_stop_isr(int irq, void *data)
+{
+	struct riic_dev *riic = data;
+
+	/* read back registers to confirm writes have fully propagated */
+	writeb(0, riic->base + RIIC_ICSR2);
+	readb(riic->base + RIIC_ICSR2);
+	writeb(0, riic->base + RIIC_ICIER);
+	readb(riic->base + RIIC_ICIER);
+
+	complete(&riic->msg_done);
+
+	return IRQ_HANDLED;
+}
+
 static u32 riic_func(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -326,6 +341,7 @@ static struct riic_irq_desc riic_irqs[] = {
 	{ .res_num = 0, .isr = riic_tend_isr, .name = "riic-tend" },
 	{ .res_num = 1, .isr = riic_rdrf_isr, .name = "riic-rdrf" },
 	{ .res_num = 2, .isr = riic_tdre_isr, .name = "riic-tdre" },
+	{ .res_num = 3, .isr = riic_stop_isr, .name = "riic-stop" },
 	{ .res_num = 5, .isr = riic_tend_isr, .name = "riic-nack" },
 };
 
diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c
index d407244fd1bc..bd0f5b195188 100644
--- a/drivers/media/pci/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c
@@ -680,6 +680,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 		/*	DST is not a frontend, attaching the ASIC	*/
 		if (dvb_attach(dst_attach, state, &card->dvb_adapter) == NULL) {
 			pr_err("%s: Could not find a Twinhan DST\n", __func__);
+			kfree(state);
 			break;
 		}
 		/*	Attach other DST peripherals if any		*/
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 49658ca39e51..a851f20dca23 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -815,12 +815,13 @@ static int fimc_is_probe(struct platform_device *pdev)
 	is->irq = irq_of_parse_and_map(dev->of_node, 0);
 	if (!is->irq) {
 		dev_err(dev, "no irq found\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_iounmap;
 	}
 
 	ret = fimc_is_get_clocks(is);
 	if (ret < 0)
-		return ret;
+		goto err_iounmap;
 
 	platform_set_drvdata(pdev, is);
 
@@ -880,6 +881,8 @@ err_irq:
 	free_irq(is->irq, is);
 err_clk:
 	fimc_is_put_clocks(is);
+err_iounmap:
+	iounmap(is->pmu_regs);
 	return ret;
 }
 
@@ -935,6 +938,7 @@ static int fimc_is_remove(struct platform_device *pdev)
 	fimc_is_unregister_subdevs(is);
 	vb2_dma_contig_cleanup_ctx(is->alloc_ctx);
 	fimc_is_put_clocks(is);
+	iounmap(is->pmu_regs);
 	fimc_is_debugfs_remove(is);
 	release_firmware(is->fw.f_w);
 	fimc_is_free_cpu_memory(is);
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 19b0293312a0..07670117f922 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -356,7 +356,12 @@ int cx231xx_send_vendor_cmd(struct cx231xx *dev,
 	 */
 	if ((ven_req->wLength > 4) && ((ven_req->bRequest == 0x4) ||
 					(ven_req->bRequest == 0x5) ||
-					(ven_req->bRequest == 0x6))) {
+					(ven_req->bRequest == 0x6) ||
+
+					/* Internal Master 3 Bus can send
+					 * and receive only 4 bytes per time
+					 */
+					(ven_req->bRequest == 0x2))) {
 		unsend_size = 0;
 		pdata = ven_req->pBuff;
 
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 0d1825696153..405ce78c1ef4 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -99,7 +99,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value)
 	u8 bank;
 
 	if (sysctrl_dev == NULL)
-		return -EINVAL;
+		return -EPROBE_DEFER;
 
 	bank = (reg >> 8);
 	if (!valid_bank(bank))
@@ -115,11 +115,13 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
 	u8 bank;
 
 	if (sysctrl_dev == NULL)
-		return -EINVAL;
+		return -EPROBE_DEFER;
 
 	bank = (reg >> 8);
-	if (!valid_bank(bank))
+	if (!valid_bank(bank)) {
+		pr_err("invalid bank\n");
 		return -EINVAL;
+	}
 
 	return abx500_mask_and_set_register_interruptible(sysctrl_dev, bank,
 		(u8)(reg & 0xFF), mask, value);
@@ -180,9 +182,15 @@ static int ab8500_sysctrl_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id ab8500_sysctrl_match[] = {
+	{ .compatible = "stericsson,ab8500-sysctrl", },
+	{}
+};
+
 static struct platform_driver ab8500_sysctrl_driver = {
 	.driver = {
 		.name = "ab8500-sysctrl",
+		.of_match_table = ab8500_sysctrl_match,
 	},
 	.probe = ab8500_sysctrl_probe,
 	.remove = ab8500_sysctrl_remove,
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 9842199e2e6c..89a2dd4d212a 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -164,14 +164,14 @@ static struct resource axp22x_pek_resources[] = {
 static struct resource axp288_power_button_resources[] = {
 	{
 		.name	= "PEK_DBR",
-		.start	= AXP288_IRQ_POKN,
-		.end	= AXP288_IRQ_POKN,
+		.start	= AXP288_IRQ_POKP,
+		.end	= AXP288_IRQ_POKP,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
 		.name	= "PEK_DBF",
-		.start	= AXP288_IRQ_POKP,
-		.end	= AXP288_IRQ_POKP,
+		.start	= AXP288_IRQ_POKN,
+		.end	= AXP288_IRQ_POKN,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 2ff39fbc70d1..df268365e04e 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -1300,6 +1300,9 @@ int mei_cl_notify_request(struct mei_cl *cl, struct file *file, u8 request)
 		return -EOPNOTSUPP;
 	}
 
+	if (!mei_cl_is_connected(cl))
+		return -ENODEV;
+
 	rets = pm_runtime_get(dev->dev);
 	if (rets < 0 && rets != -EINPROGRESS) {
 		pm_runtime_put_noidle(dev->dev);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 6291d5042ef2..6fed41bd016a 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -21,6 +21,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index 9f713b832ba3..5c768c4627d3 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -550,6 +550,7 @@ static const struct platform_device_id therm_id_table[] = {
 	{ "msic_thermal", 1 },
 	{ }
 };
+MODULE_DEVICE_TABLE(platform, therm_id_table);
 
 static struct platform_driver mid_thermal_driver = {
 	.driver = {
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 84c13dffa3a8..e7a6f1222642 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -1635,8 +1635,11 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	/* check for for attention message */
 	if (scsw_dstat(&irb->scsw) & DEV_STAT_ATTENTION) {
 		device = dasd_device_from_cdev_locked(cdev);
-		device->discipline->check_attention(device, irb->esw.esw1.lpum);
-		dasd_put_device(device);
+		if (!IS_ERR(device)) {
+			device->discipline->check_attention(device,
+							    irb->esw.esw1.lpum);
+			dasd_put_device(device);
+		}
 	}
 
 	if (!cqr)
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index e4c243748a97..de33801ca31e 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -2977,16 +2977,11 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		return;
 
 	BUG_ON(fibptr == NULL);
-	dev = fibptr->dev;
-
-	scsi_dma_unmap(scsicmd);
 
-	/* expose physical device if expose_physicald flag is on */
-	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
-	  && expose_physicals > 0)
-		aac_expose_phy_device(scsicmd);
+	dev = fibptr->dev;
 
 	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
+
 	scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */
 
 	if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
@@ -2999,158 +2994,176 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		 */
 		scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
 				   - le32_to_cpu(srbreply->data_xfer_length));
-		/*
-		 * First check the fib status
-		 */
+	}
 
-		if (le32_to_cpu(srbreply->status) != ST_OK) {
-			int len;
 
-			printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
-			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-				    SCSI_SENSE_BUFFERSIZE);
-			scsicmd->result = DID_ERROR << 16
-						| COMMAND_COMPLETE << 8
-						| SAM_STAT_CHECK_CONDITION;
-			memcpy(scsicmd->sense_buffer,
-					srbreply->sense_data, len);
-		}
+	scsi_dma_unmap(scsicmd);
 
-		/*
-		 * Next check the srb status
-		 */
-		switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
-		case SRB_STATUS_ERROR_RECOVERY:
-		case SRB_STATUS_PENDING:
-		case SRB_STATUS_SUCCESS:
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
-			break;
-		case SRB_STATUS_DATA_OVERRUN:
-			switch (scsicmd->cmnd[0]) {
-			case  READ_6:
-			case  WRITE_6:
-			case  READ_10:
-			case  WRITE_10:
-			case  READ_12:
-			case  WRITE_12:
-			case  READ_16:
-			case  WRITE_16:
-				if (le32_to_cpu(srbreply->data_xfer_length)
-							< scsicmd->underflow)
-					printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
-				else
-					printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
-				scsicmd->result = DID_ERROR << 16
-							| COMMAND_COMPLETE << 8;
-				break;
-			case INQUIRY: {
-				scsicmd->result = DID_OK << 16
-							| COMMAND_COMPLETE << 8;
-				break;
-			}
-			default:
-				scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
-				break;
-			}
-			break;
-		case SRB_STATUS_ABORTED:
-			scsicmd->result = DID_ABORT << 16 | ABORT << 8;
-			break;
-		case SRB_STATUS_ABORT_FAILED:
-			/*
-			 * Not sure about this one - but assuming the
-			 * hba was trying to abort for some reason
-			 */
-			scsicmd->result = DID_ERROR << 16 | ABORT << 8;
-			break;
-		case SRB_STATUS_PARITY_ERROR:
-			scsicmd->result = DID_PARITY << 16
-						| MSG_PARITY_ERROR << 8;
-			break;
-		case SRB_STATUS_NO_DEVICE:
-		case SRB_STATUS_INVALID_PATH_ID:
-		case SRB_STATUS_INVALID_TARGET_ID:
-		case SRB_STATUS_INVALID_LUN:
-		case SRB_STATUS_SELECTION_TIMEOUT:
-			scsicmd->result = DID_NO_CONNECT << 16
-						| COMMAND_COMPLETE << 8;
-			break;
+	/* expose physical device if expose_physicald flag is on */
+	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
+	  && expose_physicals > 0)
+		aac_expose_phy_device(scsicmd);
 
-		case SRB_STATUS_COMMAND_TIMEOUT:
-		case SRB_STATUS_TIMEOUT:
-			scsicmd->result = DID_TIME_OUT << 16
-						| COMMAND_COMPLETE << 8;
-			break;
+	/*
+	 * First check the fib status
+	 */
 
-		case SRB_STATUS_BUSY:
-			scsicmd->result = DID_BUS_BUSY << 16
-						| COMMAND_COMPLETE << 8;
-			break;
+	if (le32_to_cpu(srbreply->status) != ST_OK) {
+		int len;
 
-		case SRB_STATUS_BUS_RESET:
-			scsicmd->result = DID_RESET << 16
-						| COMMAND_COMPLETE << 8;
-			break;
+		pr_warn("aac_srb_callback: srb failed, status = %d\n",
+				le32_to_cpu(srbreply->status));
+		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+			    SCSI_SENSE_BUFFERSIZE);
+		scsicmd->result = DID_ERROR << 16
+				| COMMAND_COMPLETE << 8
+				| SAM_STAT_CHECK_CONDITION;
+		memcpy(scsicmd->sense_buffer,
+				srbreply->sense_data, len);
+	}
 
-		case SRB_STATUS_MESSAGE_REJECTED:
+	/*
+	 * Next check the srb status
+	 */
+	switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
+	case SRB_STATUS_ERROR_RECOVERY:
+	case SRB_STATUS_PENDING:
+	case SRB_STATUS_SUCCESS:
+		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		break;
+	case SRB_STATUS_DATA_OVERRUN:
+		switch (scsicmd->cmnd[0]) {
+		case  READ_6:
+		case  WRITE_6:
+		case  READ_10:
+		case  WRITE_10:
+		case  READ_12:
+		case  WRITE_12:
+		case  READ_16:
+		case  WRITE_16:
+			if (le32_to_cpu(srbreply->data_xfer_length)
+						< scsicmd->underflow)
+				pr_warn("aacraid: SCSI CMD underflow\n");
+			else
+				pr_warn("aacraid: SCSI CMD Data Overrun\n");
 			scsicmd->result = DID_ERROR << 16
-						| MESSAGE_REJECT << 8;
+					| COMMAND_COMPLETE << 8;
+			break;
+		case INQUIRY:
+			scsicmd->result = DID_OK << 16
+					| COMMAND_COMPLETE << 8;
 			break;
-		case SRB_STATUS_REQUEST_FLUSHED:
-		case SRB_STATUS_ERROR:
-		case SRB_STATUS_INVALID_REQUEST:
-		case SRB_STATUS_REQUEST_SENSE_FAILED:
-		case SRB_STATUS_NO_HBA:
-		case SRB_STATUS_UNEXPECTED_BUS_FREE:
-		case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
-		case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
-		case SRB_STATUS_DELAYED_RETRY:
-		case SRB_STATUS_BAD_FUNCTION:
-		case SRB_STATUS_NOT_STARTED:
-		case SRB_STATUS_NOT_IN_USE:
-		case SRB_STATUS_FORCE_ABORT:
-		case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
 		default:
+			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+			break;
+		}
+		break;
+	case SRB_STATUS_ABORTED:
+		scsicmd->result = DID_ABORT << 16 | ABORT << 8;
+		break;
+	case SRB_STATUS_ABORT_FAILED:
+		/*
+		 * Not sure about this one - but assuming the
+		 * hba was trying to abort for some reason
+		 */
+		scsicmd->result = DID_ERROR << 16 | ABORT << 8;
+		break;
+	case SRB_STATUS_PARITY_ERROR:
+		scsicmd->result = DID_PARITY << 16
+				| MSG_PARITY_ERROR << 8;
+		break;
+	case SRB_STATUS_NO_DEVICE:
+	case SRB_STATUS_INVALID_PATH_ID:
+	case SRB_STATUS_INVALID_TARGET_ID:
+	case SRB_STATUS_INVALID_LUN:
+	case SRB_STATUS_SELECTION_TIMEOUT:
+		scsicmd->result = DID_NO_CONNECT << 16
+				| COMMAND_COMPLETE << 8;
+		break;
+
+	case SRB_STATUS_COMMAND_TIMEOUT:
+	case SRB_STATUS_TIMEOUT:
+		scsicmd->result = DID_TIME_OUT << 16
+				| COMMAND_COMPLETE << 8;
+		break;
+
+	case SRB_STATUS_BUSY:
+		scsicmd->result = DID_BUS_BUSY << 16
+				| COMMAND_COMPLETE << 8;
+		break;
+
+	case SRB_STATUS_BUS_RESET:
+		scsicmd->result = DID_RESET << 16
+				| COMMAND_COMPLETE << 8;
+		break;
+
+	case SRB_STATUS_MESSAGE_REJECTED:
+		scsicmd->result = DID_ERROR << 16
+				| MESSAGE_REJECT << 8;
+		break;
+	case SRB_STATUS_REQUEST_FLUSHED:
+	case SRB_STATUS_ERROR:
+	case SRB_STATUS_INVALID_REQUEST:
+	case SRB_STATUS_REQUEST_SENSE_FAILED:
+	case SRB_STATUS_NO_HBA:
+	case SRB_STATUS_UNEXPECTED_BUS_FREE:
+	case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
+	case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
+	case SRB_STATUS_DELAYED_RETRY:
+	case SRB_STATUS_BAD_FUNCTION:
+	case SRB_STATUS_NOT_STARTED:
+	case SRB_STATUS_NOT_IN_USE:
+	case SRB_STATUS_FORCE_ABORT:
+	case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
+	default:
 #ifdef AAC_DETAILED_STATUS_INFO
-			printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
-				le32_to_cpu(srbreply->srb_status) & 0x3F,
-				aac_get_status_string(
-					le32_to_cpu(srbreply->srb_status) & 0x3F),
-				scsicmd->cmnd[0],
-				le32_to_cpu(srbreply->scsi_status));
+		pr_info("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x -scsi status 0x%x\n",
+			le32_to_cpu(srbreply->srb_status) & 0x3F,
+			aac_get_status_string(
+				le32_to_cpu(srbreply->srb_status) & 0x3F),
+			scsicmd->cmnd[0],
+			le32_to_cpu(srbreply->scsi_status));
 #endif
-			if ((scsicmd->cmnd[0] == ATA_12)
-				|| (scsicmd->cmnd[0] == ATA_16)) {
-					if (scsicmd->cmnd[2] & (0x01 << 5)) {
-						scsicmd->result = DID_OK << 16
-							| COMMAND_COMPLETE << 8;
-				break;
-				} else {
-					scsicmd->result = DID_ERROR << 16
-						| COMMAND_COMPLETE << 8;
-					break;
-				}
+		/*
+		 * When the CC bit is SET by the host in ATA pass thru CDB,
+		 *  driver is supposed to return DID_OK
+		 *
+		 * When the CC bit is RESET by the host, driver should
+		 *  return DID_ERROR
+		 */
+		if ((scsicmd->cmnd[0] == ATA_12)
+			|| (scsicmd->cmnd[0] == ATA_16)) {
+
+			if (scsicmd->cmnd[2] & (0x01 << 5)) {
+				scsicmd->result = DID_OK << 16
+					| COMMAND_COMPLETE << 8;
+			break;
 			} else {
 				scsicmd->result = DID_ERROR << 16
 					| COMMAND_COMPLETE << 8;
-				break;
+			break;
 			}
+		} else {
+			scsicmd->result = DID_ERROR << 16
+				| COMMAND_COMPLETE << 8;
+			break;
 		}
-		if (le32_to_cpu(srbreply->scsi_status)
-				== SAM_STAT_CHECK_CONDITION) {
-			int len;
+	}
+	if (le32_to_cpu(srbreply->scsi_status)
+			== SAM_STAT_CHECK_CONDITION) {
+		int len;
 
-			scsicmd->result |= SAM_STAT_CHECK_CONDITION;
-			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-				    SCSI_SENSE_BUFFERSIZE);
+		scsicmd->result |= SAM_STAT_CHECK_CONDITION;
+		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+			    SCSI_SENSE_BUFFERSIZE);
 #ifdef AAC_DETAILED_STATUS_INFO
-			printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
-						le32_to_cpu(srbreply->status), len);
+		pr_warn("aac_srb_callback: check condition, status = %d len=%d\n",
+					le32_to_cpu(srbreply->status), len);
 #endif
-			memcpy(scsicmd->sense_buffer,
-					srbreply->sense_data, len);
-		}
+		memcpy(scsicmd->sense_buffer,
+				srbreply->sense_data, len);
 	}
+
 	/*
 	 * OR in the scsi status (already shifted up a bit)
 	 */
diff --git a/drivers/staging/lustre/lustre/include/lustre/lustre_user.h b/drivers/staging/lustre/lustre/include/lustre/lustre_user.h
index 80f8ec529424..8ed4558238fc 100644
--- a/drivers/staging/lustre/lustre/include/lustre/lustre_user.h
+++ b/drivers/staging/lustre/lustre/include/lustre/lustre_user.h
@@ -1063,23 +1063,21 @@ struct hsm_action_item {
  * \retval buffer
  */
 static inline char *hai_dump_data_field(struct hsm_action_item *hai,
-					char *buffer, int len)
+					char *buffer, size_t len)
 {
-	int i, sz, data_len;
+	int i, data_len;
 	char *ptr;
 
 	ptr = buffer;
-	sz = len;
 	data_len = hai->hai_len - sizeof(*hai);
-	for (i = 0 ; (i < data_len) && (sz > 0) ; i++) {
-		int cnt;
-
-		cnt = snprintf(ptr, sz, "%.2X",
-			       (unsigned char)hai->hai_data[i]);
-		ptr += cnt;
-		sz -= cnt;
+	for (i = 0; (i < data_len) && (len > 2); i++) {
+		snprintf(ptr, 3, "%02X", (unsigned char)hai->hai_data[i]);
+		ptr += 2;
+		len -= 2;
 	}
+
 	*ptr = '\0';
+
 	return buffer;
 }
 
diff --git a/drivers/staging/lustre/lustre/ldlm/ldlm_lock.c b/drivers/staging/lustre/lustre/ldlm/ldlm_lock.c
index 7f8c70056ffd..040553d6e316 100644
--- a/drivers/staging/lustre/lustre/ldlm/ldlm_lock.c
+++ b/drivers/staging/lustre/lustre/ldlm/ldlm_lock.c
@@ -550,6 +550,13 @@ struct ldlm_lock *__ldlm_handle2lock(const struct lustre_handle *handle,
 	if (lock == NULL)
 		return NULL;
 
+	if (lock->l_export && lock->l_export->exp_failed) {
+		CDEBUG(D_INFO, "lock export failed: lock %p, exp %p\n",
+		       lock, lock->l_export);
+		LDLM_LOCK_PUT(lock);
+		return NULL;
+	}
+
 	/* It's unlikely but possible that someone marked the lock as
 	 * destroyed after we did handle2object on it */
 	if (flags == 0 && ((lock->l_flags & LDLM_FL_DESTROYED) == 0)) {
diff --git a/drivers/staging/lustre/lustre/llite/rw26.c b/drivers/staging/lustre/lustre/llite/rw26.c
index 3da4c01e2159..adeefb31cbad 100644
--- a/drivers/staging/lustre/lustre/llite/rw26.c
+++ b/drivers/staging/lustre/lustre/llite/rw26.c
@@ -376,6 +376,10 @@ static ssize_t ll_direct_IO_26(struct kiocb *iocb, struct iov_iter *iter,
 	if (!lli->lli_has_smd)
 		return -EBADF;
 
+	/* Check EOF by ourselves */
+	if (iov_iter_rw(iter) == READ && file_offset >= i_size_read(inode))
+		return 0;
+
 	/* FIXME: io smaller than PAGE_SIZE is broken on ia64 ??? */
 	if ((file_offset & ~CFS_PAGE_MASK) || (count & ~CFS_PAGE_MASK))
 		return -EINVAL;
diff --git a/drivers/staging/lustre/lustre/ptlrpc/service.c b/drivers/staging/lustre/lustre/ptlrpc/service.c
index f45898f17793..6d3c25ccb297 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/service.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/service.c
@@ -1240,20 +1240,15 @@ static int ptlrpc_server_hpreq_init(struct ptlrpc_service_part *svcpt,
 		 * it may hit swab race at LU-1044. */
 		if (req->rq_ops->hpreq_check) {
 			rc = req->rq_ops->hpreq_check(req);
-			/**
-			 * XXX: Out of all current
-			 * ptlrpc_hpreq_ops::hpreq_check(), only
-			 * ldlm_cancel_hpreq_check() can return an error code;
-			 * other functions assert in similar places, which seems
-			 * odd. What also does not seem right is that handlers
-			 * for those RPCs do not assert on the same checks, but
-			 * rather handle the error cases. e.g. see
-			 * ost_rw_hpreq_check(), and ost_brw_read(),
-			 * ost_brw_write().
+			if (rc == -ESTALE) {
+				req->rq_status = rc;
+				ptlrpc_error(req);
+			}
+			/** can only return error,
+			 * 0 for normal request,
+			 *  or 1 for high priority request
 			 */
-			if (rc < 0)
-				return rc;
-			LASSERT(rc == 0 || rc == 1);
+			LASSERT(rc <= 1);
 		}
 
 		spin_lock_bh(&req->rq_export->exp_rpc_lock);
diff --git a/drivers/staging/rtl8712/ieee80211.h b/drivers/staging/rtl8712/ieee80211.h
index d374824c4f33..7b16c05b5e8b 100644
--- a/drivers/staging/rtl8712/ieee80211.h
+++ b/drivers/staging/rtl8712/ieee80211.h
@@ -143,52 +143,52 @@ struct ieee_ibss_seq {
 };
 
 struct ieee80211_hdr {
-	u16 frame_ctl;
-	u16 duration_id;
+	__le16 frame_ctl;
+	__le16 duration_id;
 	u8 addr1[ETH_ALEN];
 	u8 addr2[ETH_ALEN];
 	u8 addr3[ETH_ALEN];
-	u16 seq_ctl;
+	__le16 seq_ctl;
 	u8 addr4[ETH_ALEN];
-} __packed;
+}  __packed __aligned(2);
 
 struct ieee80211_hdr_3addr {
-	u16 frame_ctl;
-	u16 duration_id;
+	__le16 frame_ctl;
+	__le16 duration_id;
 	u8 addr1[ETH_ALEN];
 	u8 addr2[ETH_ALEN];
 	u8 addr3[ETH_ALEN];
-	u16 seq_ctl;
-} __packed;
+	__le16 seq_ctl;
+}  __packed __aligned(2);
 
 
 struct	ieee80211_hdr_qos {
-	u16 frame_ctl;
-	u16 duration_id;
+	__le16 frame_ctl;
+	__le16 duration_id;
 	u8 addr1[ETH_ALEN];
 	u8 addr2[ETH_ALEN];
 	u8 addr3[ETH_ALEN];
-	u16 seq_ctl;
+	__le16 seq_ctl;
 	u8 addr4[ETH_ALEN];
-	u16	qc;
-}  __packed;
+	__le16	qc;
+}   __packed __aligned(2);
 
 struct  ieee80211_hdr_3addr_qos {
-	u16 frame_ctl;
-	u16 duration_id;
+	__le16 frame_ctl;
+	__le16 duration_id;
 	u8  addr1[ETH_ALEN];
 	u8  addr2[ETH_ALEN];
 	u8  addr3[ETH_ALEN];
-	u16 seq_ctl;
-	u16 qc;
+	__le16 seq_ctl;
+	__le16 qc;
 }  __packed;
 
 struct eapol {
 	u8 snap[6];
-	u16 ethertype;
+	__be16 ethertype;
 	u8 version;
 	u8 type;
-	u16 length;
+	__le16 length;
 } __packed;
 
 
@@ -528,13 +528,13 @@ struct ieee80211_security {
  */
 
 struct ieee80211_header_data {
-	u16 frame_ctl;
-	u16 duration_id;
+	__le16 frame_ctl;
+	__le16 duration_id;
 	u8 addr1[6];
 	u8 addr2[6];
 	u8 addr3[6];
-	u16 seq_ctrl;
-};
+	__le16 seq_ctrl;
+} __packed __aligned(2);
 
 #define BEACON_PROBE_SSID_ID_POSITION 12
 
@@ -566,18 +566,18 @@ struct ieee80211_info_element {
 /*
  * These are the data types that can make up management packets
  *
-	u16 auth_algorithm;
-	u16 auth_sequence;
-	u16 beacon_interval;
-	u16 capability;
+	__le16 auth_algorithm;
+	__le16 auth_sequence;
+	__le16 beacon_interval;
+	__le16 capability;
 	u8 current_ap[ETH_ALEN];
-	u16 listen_interval;
+	__le16 listen_interval;
 	struct {
 		u16 association_id:14, reserved:2;
 	} __packed;
-	u32 time_stamp[2];
-	u16 reason;
-	u16 status;
+	__le32 time_stamp[2];
+	__le16 reason;
+	__le16 status;
 */
 
 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
@@ -585,16 +585,16 @@ struct ieee80211_info_element {
 
 struct ieee80211_authentication {
 	struct ieee80211_header_data header;
-	u16 algorithm;
-	u16 transaction;
-	u16 status;
+	__le16 algorithm;
+	__le16 transaction;
+	__le16 status;
 } __packed;
 
 struct ieee80211_probe_response {
 	struct ieee80211_header_data header;
-	u32 time_stamp[2];
-	u16 beacon_interval;
-	u16 capability;
+	__le32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
 	struct ieee80211_info_element info_element;
 } __packed;
 
@@ -604,16 +604,16 @@ struct ieee80211_probe_request {
 
 struct ieee80211_assoc_request_frame {
 	struct ieee80211_hdr_3addr header;
-	u16 capability;
-	u16 listen_interval;
+	__le16 capability;
+	__le16 listen_interval;
 	struct ieee80211_info_element_hdr info_element;
 } __packed;
 
 struct ieee80211_assoc_response_frame {
 	struct ieee80211_hdr_3addr header;
-	u16 capability;
-	u16 status;
-	u16 aid;
+	__le16 capability;
+	__le16 status;
+	__le16 aid;
 } __packed;
 
 struct ieee80211_txb {
diff --git a/drivers/staging/rtl8712/rtl871x_xmit.c b/drivers/staging/rtl8712/rtl871x_xmit.c
index 68d65d230fe3..d3ad89c7b8af 100644
--- a/drivers/staging/rtl8712/rtl871x_xmit.c
+++ b/drivers/staging/rtl8712/rtl871x_xmit.c
@@ -339,7 +339,8 @@ sint r8712_update_attrib(struct _adapter *padapter, _pkt *pkt,
 	/* if in MP_STATE, update pkt_attrib from mp_txcmd, and overwrite
 	 * some settings above.*/
 	if (check_fwstate(pmlmepriv, WIFI_MP_STATE))
-		pattrib->priority = (txdesc.txdw1 >> QSEL_SHT) & 0x1f;
+		pattrib->priority =
+		    (le32_to_cpu(txdesc.txdw1) >> QSEL_SHT) & 0x1f;
 	return _SUCCESS;
 }
 
@@ -479,7 +480,7 @@ static sint make_wlanhdr(struct _adapter *padapter, u8 *hdr,
 	struct ieee80211_hdr *pwlanhdr = (struct ieee80211_hdr *)hdr;
 	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct qos_priv *pqospriv = &pmlmepriv->qospriv;
-	u16 *fctrl = &pwlanhdr->frame_ctl;
+	__le16 *fctrl = &pwlanhdr->frame_ctl;
 
 	memset(hdr, 0, WLANHDR_OFFSET);
 	SetFrameSubType(fctrl, pattrib->subtype);
@@ -568,7 +569,7 @@ static sint r8712_put_snap(u8 *data, u16 h_proto)
 	snap->oui[0] = oui[0];
 	snap->oui[1] = oui[1];
 	snap->oui[2] = oui[2];
-	*(u16 *)(data + SNAP_SIZE) = htons(h_proto);
+	*(__be16 *)(data + SNAP_SIZE) = htons(h_proto);
 	return SNAP_SIZE + sizeof(u16);
 }
 
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index e12bd3635f83..2dd285827169 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -275,8 +275,16 @@ static void sysrq_handler(struct xenbus_watch *watch, const char **vec,
 	err = xenbus_transaction_start(&xbt);
 	if (err)
 		return;
-	if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) {
-		pr_err("Unable to read sysrq code in control/sysrq\n");
+	err = xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key);
+	if (err < 0) {
+		/*
+		 * The Xenstore watch fires directly after registering it and
+		 * after a suspend/resume cycle. So ENOENT is no error but
+		 * might happen in those cases.
+		 */
+		if (err != -ENOENT)
+			pr_err("Error %d reading sysrq code in control/sysrq\n",
+			       err);
 		xenbus_transaction_end(xbt, 1);
 		return;
 	}