V4L/DVB (9149): hvr950q: led feedback based on snr

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 188 insertions, 1 deletions

diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c
index 0b82cc2a1e16..eabf9a68e7ec 100644
--- a/drivers/media/dvb/frontends/au8522.c
+++ b/drivers/media/dvb/frontends/au8522.c
@@ -40,6 +40,8 @@ struct au8522_state {
 	u32 current_frequency;
 	fe_modulation_t current_modulation;
 
+	u32 fe_status;
+	unsigned int led_state;
 };
 
 static int debug;
@@ -538,11 +540,98 @@ static int au8522_init(struct dvb_frontend *fe)
 	return 0;
 }
 
+static int au8522_led_gpio_enable(struct au8522_state *state, int onoff)
+{
+	struct au8522_led_config *led_config = state->config->led_cfg;
+	u8 val;
+
+	/* bail out if we cant control an LED */
+	if (!led_config || !led_config->gpio_output ||
+	    !led_config->gpio_output_enable || !led_config->gpio_output_disable)
+		return 0;
+
+	val = au8522_readreg(state, 0x4000 |
+			     (led_config->gpio_output & ~0xc000));
+	if (onoff) {
+		/* enable GPIO output */
+		val &= ~((led_config->gpio_output_enable >> 8) & 0xff);
+		val |=  (led_config->gpio_output_enable & 0xff);
+	} else {
+		/* disable GPIO output */
+		val &= ~((led_config->gpio_output_disable >> 8) & 0xff);
+		val |=  (led_config->gpio_output_disable & 0xff);
+	}
+	return au8522_writereg(state, 0x8000 |
+			       (led_config->gpio_output & ~0xc000), val);
+}
+
+/* led = 0 | off
+ * led = 1 | signal ok
+ * led = 2 | signal strong
+ * led < 0 | only light led if leds are currently off
+ */
+static int au8522_led_ctrl(struct au8522_state *state, int led)
+{
+	struct au8522_led_config *led_config = state->config->led_cfg;
+	int i, ret = 0;
+
+	/* bail out if we cant control an LED */
+	if (!led_config || !led_config->gpio_leds ||
+	    !led_config->num_led_states || !led_config->led_states)
+		return 0;
+
+	if (led < 0) {
+		/* if LED is already lit, then leave it as-is */
+		if (state->led_state)
+			return 0;
+		else
+			led *= -1;
+	}
+
+	/* toggle LED if changing state */
+	if (state->led_state != led) {
+		u8 val;
+
+		dprintk("%s: %d\n", __func__, led);
+
+		au8522_led_gpio_enable(state, 1);
+
+		val = au8522_readreg(state, 0x4000 |
+				     (led_config->gpio_leds & ~0xc000));
+
+		/* start with all leds off */
+		for (i = 0; i < led_config->num_led_states; i++)
+			val &= ~led_config->led_states[i];
+
+		/* set selected LED state */
+		if (led < led_config->num_led_states)
+			val |= led_config->led_states[led];
+		else if (led_config->num_led_states)
+			val |=
+			led_config->led_states[led_config->num_led_states - 1];
+
+		ret = au8522_writereg(state, 0x8000 |
+				      (led_config->gpio_leds & ~0xc000), val);
+		if (ret < 0)
+			return ret;
+
+		state->led_state = led;
+
+		if (led == 0)
+			au8522_led_gpio_enable(state, 0);
+	}
+
+	return 0;
+}
+
 static int au8522_sleep(struct dvb_frontend *fe)
 {
 	struct au8522_state *state = fe->demodulator_priv;
 	dprintk("%s()\n", __func__);
 
+	/* turn off led */
+	au8522_led_ctrl(state, 0);
+
 	state->current_frequency = 0;
 
 	return 0;
@@ -592,12 +681,53 @@ static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status)
 			*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
 		break;
 	}
+	state->fe_status = *status;
+
+	if (*status & FE_HAS_LOCK)
+		/* turn on LED, if it isn't on already */
+		au8522_led_ctrl(state, -1);
+	else
+		/* turn off LED */
+		au8522_led_ctrl(state, 0);
 
 	dprintk("%s() status 0x%08x\n", __func__, *status);
 
 	return 0;
 }
 
+static int au8522_led_status(struct au8522_state *state, const u16 *snr)
+{
+	struct au8522_led_config *led_config = state->config->led_cfg;
+	int led;
+	u16 strong;
+
+	/* bail out if we cant control an LED */
+	if (!led_config)
+		return 0;
+
+	if (0 == (state->fe_status & FE_HAS_LOCK))
+		return au8522_led_ctrl(state, 0);
+	else if (state->current_modulation == QAM_256)
+		strong = led_config->qam256_strong;
+	else if (state->current_modulation == QAM_64)
+		strong = led_config->qam64_strong;
+	else /* (state->current_modulation == VSB_8) */
+		strong = led_config->vsb8_strong;
+
+	if (*snr >= strong)
+		led = 2;
+	else
+		led = 1;
+
+	if ((state->led_state) &&
+	    (((strong < *snr) ? (*snr - strong) : (strong - *snr)) <= 10))
+		/* snr didn't change enough to bother
+		 * changing the color of the led */
+		return 0;
+
+	return au8522_led_ctrl(state, led);
+}
+
 static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr)
 {
 	struct au8522_state *state = fe->demodulator_priv;
@@ -621,6 +751,9 @@ static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr)
 					    au8522_readreg(state, 0x4311),
 					    snr);
 
+	if (state->config->led_cfg)
+		au8522_led_status(state, snr);
+
 	return ret;
 }
 
diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h
index 595915ade8c3..7b94f554a093 100644
--- a/drivers/media/dvb/frontends/au8522.h
+++ b/drivers/media/dvb/frontends/au8522.h
@@ -30,6 +30,21 @@ enum au8522_if_freq {
 	AU8522_IF_3_25MHZ,
 };
 
+struct au8522_led_config {
+	u16 vsb8_strong;
+	u16 qam64_strong;
+	u16 qam256_strong;
+
+	u16 gpio_output;
+	/* unset hi bits, set low bits */
+	u16 gpio_output_enable;
+	u16 gpio_output_disable;
+
+	u16 gpio_leds;
+	u8 *led_states;
+	unsigned int num_led_states;
+};
+
 struct au8522_config {
 	/* the demodulator's i2c address */
 	u8 demod_address;
@@ -39,6 +54,8 @@ struct au8522_config {
 #define AU8522_DEMODLOCKING 1
 	u8 status_mode;
 
+	struct au8522_led_config *led_cfg;
+
 	enum au8522_if_freq vsb_if;
 	enum au8522_if_freq qam_if;
 };
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index a52abce16e1a..f0fcdb4769d7 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -36,11 +36,39 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 #define _AU0828_BULKPIPE 0x83
 #define _BULKPIPESIZE 0xe522
 
+static u8 hauppauge_hvr950q_led_states[] = {
+	0x00, /* off */
+	0x02, /* yellow */
+	0x04, /* green */
+};
+
+static struct au8522_led_config hauppauge_hvr950q_led_cfg = {
+	.gpio_output = 0x00e0,
+	.gpio_output_enable  = 0x6006,
+	.gpio_output_disable = 0x0660,
+
+	.gpio_leds = 0x00e2,
+	.led_states  = hauppauge_hvr950q_led_states,
+	.num_led_states = sizeof(hauppauge_hvr950q_led_states),
+
+	.vsb8_strong   = 20 /* dB */ * 10,
+	.qam64_strong  = 25 /* dB */ * 10,
+	.qam256_strong = 32 /* dB */ * 10,
+};
+
 static struct au8522_config hauppauge_hvr950q_config = {
 	.demod_address = 0x8e >> 1,
 	.status_mode   = AU8522_DEMODLOCKING,
 	.qam_if        = AU8522_IF_6MHZ,
 	.vsb_if        = AU8522_IF_6MHZ,
+	.led_cfg       = &hauppauge_hvr950q_led_cfg,
+};
+
+static struct au8522_config fusionhdtv7usb_config = {
+	.demod_address = 0x8e >> 1,
+	.status_mode   = AU8522_DEMODLOCKING,
+	.qam_if        = AU8522_IF_6MHZ,
+	.vsb_if        = AU8522_IF_6MHZ,
 };
 
 static struct au8522_config hauppauge_woodbury_config = {
@@ -352,7 +380,6 @@ int au0828_dvb_register(struct au0828_dev *dev)
 	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
-	case AU0828_BOARD_DVICO_FUSIONHDTV7:
 		dvb->frontend = dvb_attach(au8522_attach,
 				&hauppauge_hvr950q_config,
 				&dev->i2c_adap);
@@ -378,6 +405,16 @@ int au0828_dvb_register(struct au0828_dev *dev)
 				   0x60, &dev->i2c_adap,
 				   &hauppauge_woodbury_tunerconfig);
 		break;
+	case AU0828_BOARD_DVICO_FUSIONHDTV7:
+		dvb->frontend = dvb_attach(au8522_attach,
+				&fusionhdtv7usb_config,
+				&dev->i2c_adap);
+		if (dvb->frontend != NULL) {
+			dvb_attach(xc5000_attach, dvb->frontend,
+				&dev->i2c_adap,
+				&hauppauge_hvr950q_tunerconfig);
+		}
+		break;
 	default:
 		printk(KERN_WARNING "The frontend of your DVB/ATSC card "
 		       "isn't supported yet\n");