summaryrefslogtreecommitdiff
path: root/include/linux/fdreg.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/fdreg.h
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/fdreg.h')
-rw-r--r--include/linux/fdreg.h137
1 files changed, 137 insertions, 0 deletions
diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
new file mode 100644
index 000000000000..c2eeb63b72db
--- /dev/null
+++ b/include/linux/fdreg.h
@@ -0,0 +1,137 @@
+#ifndef _LINUX_FDREG_H
+#define _LINUX_FDREG_H
+/*
+ * This file contains some defines for the floppy disk controller.
+ * Various sources. Mostly "IBM Microcomputers: A Programmers
+ * Handbook", Sanches and Canton.
+ */
+
+#ifdef FDPATCHES
+#define FD_IOPORT fdc_state[fdc].address
+#else
+/* It would be a lot saner just to force fdc_state[fdc].address to always
+ be set ! FIXME */
+#define FD_IOPORT 0x3f0
+#endif
+
+/* Fd controller regs. S&C, about page 340 */
+#define FD_STATUS (4 + FD_IOPORT )
+#define FD_DATA (5 + FD_IOPORT )
+
+/* Digital Output Register */
+#define FD_DOR (2 + FD_IOPORT )
+
+/* Digital Input Register (read) */
+#define FD_DIR (7 + FD_IOPORT )
+
+/* Diskette Control Register (write)*/
+#define FD_DCR (7 + FD_IOPORT )
+
+/* Bits of main status register */
+#define STATUS_BUSYMASK 0x0F /* drive busy mask */
+#define STATUS_BUSY 0x10 /* FDC busy */
+#define STATUS_DMA 0x20 /* 0- DMA mode */
+#define STATUS_DIR 0x40 /* 0- cpu->fdc */
+#define STATUS_READY 0x80 /* Data reg ready */
+
+/* Bits of FD_ST0 */
+#define ST0_DS 0x03 /* drive select mask */
+#define ST0_HA 0x04 /* Head (Address) */
+#define ST0_NR 0x08 /* Not Ready */
+#define ST0_ECE 0x10 /* Equipment check error */
+#define ST0_SE 0x20 /* Seek end */
+#define ST0_INTR 0xC0 /* Interrupt code mask */
+
+/* Bits of FD_ST1 */
+#define ST1_MAM 0x01 /* Missing Address Mark */
+#define ST1_WP 0x02 /* Write Protect */
+#define ST1_ND 0x04 /* No Data - unreadable */
+#define ST1_OR 0x10 /* OverRun */
+#define ST1_CRC 0x20 /* CRC error in data or addr */
+#define ST1_EOC 0x80 /* End Of Cylinder */
+
+/* Bits of FD_ST2 */
+#define ST2_MAM 0x01 /* Missing Address Mark (again) */
+#define ST2_BC 0x02 /* Bad Cylinder */
+#define ST2_SNS 0x04 /* Scan Not Satisfied */
+#define ST2_SEH 0x08 /* Scan Equal Hit */
+#define ST2_WC 0x10 /* Wrong Cylinder */
+#define ST2_CRC 0x20 /* CRC error in data field */
+#define ST2_CM 0x40 /* Control Mark = deleted */
+
+/* Bits of FD_ST3 */
+#define ST3_HA 0x04 /* Head (Address) */
+#define ST3_DS 0x08 /* drive is double-sided */
+#define ST3_TZ 0x10 /* Track Zero signal (1=track 0) */
+#define ST3_RY 0x20 /* drive is ready */
+#define ST3_WP 0x40 /* Write Protect */
+#define ST3_FT 0x80 /* Drive Fault */
+
+/* Values for FD_COMMAND */
+#define FD_RECALIBRATE 0x07 /* move to track 0 */
+#define FD_SEEK 0x0F /* seek track */
+#define FD_READ 0xE6 /* read with MT, MFM, SKip deleted */
+#define FD_WRITE 0xC5 /* write with MT, MFM */
+#define FD_SENSEI 0x08 /* Sense Interrupt Status */
+#define FD_SPECIFY 0x03 /* specify HUT etc */
+#define FD_FORMAT 0x4D /* format one track */
+#define FD_VERSION 0x10 /* get version code */
+#define FD_CONFIGURE 0x13 /* configure FIFO operation */
+#define FD_PERPENDICULAR 0x12 /* perpendicular r/w mode */
+#define FD_GETSTATUS 0x04 /* read ST3 */
+#define FD_DUMPREGS 0x0E /* dump the contents of the fdc regs */
+#define FD_READID 0xEA /* prints the header of a sector */
+#define FD_UNLOCK 0x14 /* Fifo config unlock */
+#define FD_LOCK 0x94 /* Fifo config lock */
+#define FD_RSEEK_OUT 0x8f /* seek out (i.e. to lower tracks) */
+#define FD_RSEEK_IN 0xcf /* seek in (i.e. to higher tracks) */
+
+/* the following commands are new in the 82078. They are not used in the
+ * floppy driver, except the first three. These commands may be useful for apps
+ * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
+ * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */
+
+#define FD_PARTID 0x18 /* part id ("extended" version cmd) */
+#define FD_SAVE 0x2e /* save fdc regs for later restore */
+#define FD_DRIVESPEC 0x8e /* drive specification: Access to the
+ * 2 Mbps data transfer rate for tape
+ * drives */
+
+#define FD_RESTORE 0x4e /* later restore */
+#define FD_POWERDOWN 0x27 /* configure FDC's powersave features */
+#define FD_FORMAT_N_WRITE 0xef /* format and write in one go. */
+#define FD_OPTION 0x33 /* ISO format (which is a clean way to
+ * pack more sectors on a track) */
+
+/* DMA commands */
+#define DMA_READ 0x46
+#define DMA_WRITE 0x4A
+
+/* FDC version return types */
+#define FDC_NONE 0x00
+#define FDC_UNKNOWN 0x10 /* DO NOT USE THIS TYPE EXCEPT IF IDENTIFICATION
+ FAILS EARLY */
+#define FDC_8272A 0x20 /* Intel 8272a, NEC 765 */
+#define FDC_765ED 0x30 /* Non-Intel 1MB-compatible FDC, can't detect */
+#define FDC_82072 0x40 /* Intel 82072; 8272a + FIFO + DUMPREGS */
+#define FDC_82072A 0x45 /* 82072A (on Sparcs) */
+#define FDC_82077_ORIG 0x51 /* Original version of 82077AA, sans LOCK */
+#define FDC_82077 0x52 /* 82077AA-1 */
+#define FDC_82078_UNKN 0x5f /* Unknown 82078 variant */
+#define FDC_82078 0x60 /* 44pin 82078 or 64pin 82078SL */
+#define FDC_82078_1 0x61 /* 82078-1 (2Mbps fdc) */
+#define FDC_S82078B 0x62 /* S82078B (first seen on Adaptec AVA-2825 VLB
+ * SCSI/EIDE/Floppy controller) */
+#define FDC_87306 0x63 /* National Semiconductor PC 87306 */
+
+/*
+ * Beware: the fdc type list is roughly sorted by increasing features.
+ * Presence of features is tested by comparing the FDC version id with the
+ * "oldest" version that has the needed feature.
+ * If during FDC detection, an obscure test fails late in the sequence, don't
+ * assign FDC_UNKNOWN. Else the FDC will be treated as a dumb 8272a, or worse.
+ * This is especially true if the tests are unneeded.
+ */
+
+#define FD_RESET_DELAY 20
+#endif