summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/linux/nl80211.h42
-rw-r--r--include/net/cfg80211.h17
-rw-r--r--net/wireless/nl80211.c81
3 files changed, 139 insertions, 1 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index c73582fb9d20..a5ab23df5b17 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -506,6 +506,9 @@
* @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
* of PMKSA caching dandidates.
*
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -632,6 +635,9 @@ enum nl80211_commands {
NL80211_CMD_PMKSA_CANDIDATE,
+ NL80211_CMD_TDLS_OPER,
+ NL80211_CMD_TDLS_MGMT,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1089,6 +1095,20 @@ enum nl80211_commands {
* This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
* %NL80211_CMD_FRAME commands.
*
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
+ * request, link setup confirm, link teardown, etc.). Values are
+ * described in the TDLS (802.11z) specification.
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
+ * TDLS conversation between two devices.
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
+ * &enum nl80211_tdls_operation, represented as a u8.
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
+ * as a TDLS peer sta.
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
+ * procedures should be performed by sending TDLS packets via
+ * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
+ * used for asking the driver to perform a TDLS operation.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1311,6 +1331,12 @@ enum nl80211_attrs {
NL80211_ATTR_TX_NO_CCK_RATE,
+ NL80211_ATTR_TDLS_ACTION,
+ NL80211_ATTR_TDLS_DIALOG_TOKEN,
+ NL80211_ATTR_TDLS_OPERATION,
+ NL80211_ATTR_TDLS_SUPPORT,
+ NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2604,4 +2630,20 @@ enum nl80211_pmksa_candidate_attr {
MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
};
+/**
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
+ * @NL80211_TDLS_SETUP: Setup TDLS link
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
+ */
+enum nl80211_tdls_operation {
+ NL80211_TDLS_DISCOVERY_REQ,
+ NL80211_TDLS_SETUP,
+ NL80211_TDLS_TEARDOWN,
+ NL80211_TDLS_ENABLE_LINK,
+ NL80211_TDLS_DISABLE_LINK,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 34b8f269976b..74f4f85be32f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1422,6 +1422,9 @@ struct cfg80211_gtk_rekey_data {
* @set_ringparam: Set tx and rx ring sizes.
*
* @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tdls_mgmt: Transmit a TDLS management frame.
+ * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup).
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -1605,6 +1608,12 @@ struct cfg80211_ops {
int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_gtk_rekey_data *data);
+
+ int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *peer, u8 action_code, u8 dialog_token,
+ u16 status_code, const u8 *buf, size_t len);
+ int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *peer, enum nl80211_tdls_operation oper);
};
/*
@@ -1657,6 +1666,12 @@ struct cfg80211_ops {
* @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the
* firmware.
* @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP.
+ * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation.
+ * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z)
+ * link setup/discovery operations internally. Setup, discovery and
+ * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
+ * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
+ * used for asking the driver/firmware to perform a TDLS operation.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -1673,6 +1688,8 @@ enum wiphy_flags {
WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12),
WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13),
WIPHY_FLAG_AP_UAPSD = BIT(14),
+ WIPHY_FLAG_SUPPORTS_TDLS = BIT(15),
+ WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16),
};
/**
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3799623e7f46..25a37fc951e3 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -192,6 +192,11 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_ROAM_SUPPORT] = { .type = NLA_FLAG },
[NL80211_ATTR_SCHED_SCAN_MATCH] = { .type = NLA_NESTED },
[NL80211_ATTR_TX_NO_CCK_RATE] = { .type = NLA_FLAG },
+ [NL80211_ATTR_TDLS_ACTION] = { .type = NLA_U8 },
+ [NL80211_ATTR_TDLS_DIALOG_TOKEN] = { .type = NLA_U8 },
+ [NL80211_ATTR_TDLS_OPERATION] = { .type = NLA_U8 },
+ [NL80211_ATTR_TDLS_SUPPORT] = { .type = NLA_FLAG },
+ [NL80211_ATTR_TDLS_EXTERNAL_SETUP] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -732,9 +737,12 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
NLA_PUT_FLAG(msg, NL80211_ATTR_SUPPORT_MESH_AUTH);
if (dev->wiphy.flags & WIPHY_FLAG_AP_UAPSD)
NLA_PUT_FLAG(msg, NL80211_ATTR_SUPPORT_AP_UAPSD);
-
if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_FW_ROAM)
NLA_PUT_FLAG(msg, NL80211_ATTR_ROAM_SUPPORT);
+ if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS)
+ NLA_PUT_FLAG(msg, NL80211_ATTR_TDLS_SUPPORT);
+ if (dev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP)
+ NLA_PUT_FLAG(msg, NL80211_ATTR_TDLS_EXTERNAL_SETUP);
NLA_PUT(msg, NL80211_ATTR_CIPHER_SUITES,
sizeof(u32) * dev->wiphy.n_cipher_suites,
@@ -877,6 +885,10 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
}
CMD(set_channel, SET_CHANNEL);
CMD(set_wds_peer, SET_WDS_PEER);
+ if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) {
+ CMD(tdls_mgmt, TDLS_MGMT);
+ CMD(tdls_oper, TDLS_OPER);
+ }
if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN)
CMD(sched_scan_start, START_SCHED_SCAN);
@@ -4966,6 +4978,57 @@ static int nl80211_flush_pmksa(struct sk_buff *skb, struct genl_info *info)
return rdev->ops->flush_pmksa(&rdev->wiphy, dev);
}
+static int nl80211_tdls_mgmt(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ u8 action_code, dialog_token;
+ u16 status_code;
+ u8 *peer;
+
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) ||
+ !rdev->ops->tdls_mgmt)
+ return -EOPNOTSUPP;
+
+ if (!info->attrs[NL80211_ATTR_TDLS_ACTION] ||
+ !info->attrs[NL80211_ATTR_STATUS_CODE] ||
+ !info->attrs[NL80211_ATTR_TDLS_DIALOG_TOKEN] ||
+ !info->attrs[NL80211_ATTR_IE] ||
+ !info->attrs[NL80211_ATTR_MAC])
+ return -EINVAL;
+
+ peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
+ action_code = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_ACTION]);
+ status_code = nla_get_u16(info->attrs[NL80211_ATTR_STATUS_CODE]);
+ dialog_token = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_DIALOG_TOKEN]);
+
+ return rdev->ops->tdls_mgmt(&rdev->wiphy, dev, peer, action_code,
+ dialog_token, status_code,
+ nla_data(info->attrs[NL80211_ATTR_IE]),
+ nla_len(info->attrs[NL80211_ATTR_IE]));
+}
+
+static int nl80211_tdls_oper(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ enum nl80211_tdls_operation operation;
+ u8 *peer;
+
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) ||
+ !rdev->ops->tdls_oper)
+ return -EOPNOTSUPP;
+
+ if (!info->attrs[NL80211_ATTR_TDLS_OPERATION] ||
+ !info->attrs[NL80211_ATTR_MAC])
+ return -EINVAL;
+
+ operation = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_OPERATION]);
+ peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
+
+ return rdev->ops->tdls_oper(&rdev->wiphy, dev, peer, operation);
+}
+
static int nl80211_remain_on_channel(struct sk_buff *skb,
struct genl_info *info)
{
@@ -6281,6 +6344,22 @@ static struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_TDLS_MGMT,
+ .doit = nl80211_tdls_mgmt,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_TDLS_OPER,
+ .doit = nl80211_tdls_oper,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {