diff options
| -rw-r--r-- | Documentation/devicetree/bindings/powerpc/fsl/raideng.txt | 81 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 1 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 6 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi | 85 |
4 files changed, 173 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt new file mode 100644 index 000000000000..4ad29b9ac2ac --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt @@ -0,0 +1,81 @@ +* Freescale 85xx RAID Engine nodes + +RAID Engine nodes are defined to describe on-chip RAID accelerators. Each RAID +Engine should have a separate node. + +Supported chips: +P5020, P5040 + +Required properties: + +- compatible: Should contain "fsl,raideng-v1.0" as the value + This identifies RAID Engine block. 1 in 1.0 represents + major number whereas 0 represents minor number. The + version matches the hardware IP version. +- reg: offset and length of the register set for the device +- ranges: standard ranges property specifying the translation + between child address space and parent address space + +Example: + /* P5020 */ + raideng: raideng@320000 { + compatible = "fsl,raideng-v1.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x320000 0x10000>; + ranges = <0 0x320000 0x10000>; + }; + + +There must be a sub-node for each job queue present in RAID Engine +This node must be a sub-node of the main RAID Engine node + +- compatible: Should contain "fsl,raideng-v1.0-job-queue" as the value + This identifies the job queue interface +- reg: offset and length of the register set for job queue +- ranges: standard ranges property specifying the translation + between child address space and parent address space + +Example: + /* P5020 */ + raideng_jq0@1000 { + compatible = "fsl,raideng-v1.0-job-queue"; + reg = <0x1000 0x1000>; + ranges = <0x0 0x1000 0x1000>; + }; + + +There must be a sub-node for each job ring present in RAID Engine +This node must be a sub-node of job queue node + +- compatible: Must contain "fsl,raideng-v1.0-job-ring" as the value + This identifies job ring. Should contain either + "fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring" + depending upon whether ring has high or low priority +- reg: offset and length of the register set for job ring +- interrupts: interrupt mapping for job ring IRQ + +Optional property: + +- fsl,liodn: Specifies the LIODN to be used for Job Ring. This + property is normally set by firmware. Value + is of 12-bits which is the LIODN number for this JR. + This property is used by the IOMMU (PAMU) to distinquish + transactions from this JR and than be able to do address + translation & protection accordingly. + +Example: + /* P5020 */ + raideng_jq0@1000 { + compatible = "fsl,raideng-v1.0-job-queue"; + reg = <0x1000 0x1000>; + ranges = <0x0 0x1000 0x1000>; + + raideng_jr0: jr@0 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring"; + reg = <0x0 0x400>; + interrupts = <139 2 0 0>; + interrupt-parent = <&mpic>; + fsl,liodn = <0x41>; + }; + }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 64b6abea8464..5d7205b7bb05 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -354,4 +354,5 @@ /include/ "qoriq-sata2-0.dtsi" /include/ "qoriq-sata2-1.dtsi" /include/ "qoriq-sec4.2-0.dtsi" +/include/ "qoriq-raid1.0-0.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi index 0a198b0a77e5..8df47fc45ab5 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -73,6 +73,12 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + raideng = &raideng; + raideng_jr0 = &raideng_jr0; + raideng_jr1 = &raideng_jr1; + raideng_jr2 = &raideng_jr2; + raideng_jr3 = &raideng_jr3; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi new file mode 100644 index 000000000000..8d2e8aa6cf8a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi @@ -0,0 +1,85 @@ +/* + * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +raideng: raideng@320000 { + compatible = "fsl,raideng-v1.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x320000 0x10000>; + ranges = <0 0x320000 0x10000>; + + raideng_jq0@1000 { + compatible = "fsl,raideng-v1.0-job-queue"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1000 0x1000>; + ranges = <0x0 0x1000 0x1000>; + + raideng_jr0: jr@0 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring"; + reg = <0x0 0x400>; + interrupts = <139 2 0 0>; + interrupt-parent = <&mpic>; + }; + + raideng_jr1: jr@400 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring"; + reg = <0x400 0x400>; + interrupts = <140 2 0 0>; + interrupt-parent = <&mpic>; + }; + }; + + raideng_jq1@2000 { + compatible = "fsl,raideng-v1.0-job-queue"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2000 0x1000>; + ranges = <0x0 0x2000 0x1000>; + + raideng_jr2: jr@0 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring"; + reg = <0x0 0x400>; + interrupts = <141 2 0 0>; + interrupt-parent = <&mpic>; + }; + + raideng_jr3: jr@400 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring"; + reg = <0x400 0x400>; + interrupts = <142 2 0 0>; + interrupt-parent = <&mpic>; + }; + }; +}; |