diff options
-rw-r--r-- | drivers/regulator/ab8500-ext.c | 98 | ||||
-rw-r--r-- | include/linux/regulator/ab8500.h | 4 |
2 files changed, 75 insertions, 27 deletions
diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c index 95008dec5190..21b9bfb0fc5e 100644 --- a/drivers/regulator/ab8500-ext.c +++ b/drivers/regulator/ab8500-ext.c @@ -28,80 +28,121 @@ * @dev: device pointer * @desc: regulator description * @rdev: regulator device + * @cfg: regulator configuration (extension of regulator FW configuration) * @is_enabled: status of regulator (on/off) * @update_bank: bank to control on/off * @update_reg: register to control on/off * @update_mask: mask to enable/disable and set mode of regulator * @update_val: bits holding the regulator current mode - * @update_val_en: bits to set EN pin active (LPn pin deactive) + * @update_val_hp: bits to set EN pin active (LPn pin deactive) * normally this means high power mode - * @update_val_en_lp: bits to set EN pin active and LPn pin active - * normally this means low power mode - * @delay: startup delay in ms + * @update_val_lp: bits to set EN pin active and LPn pin active + * normally this means low power mode + * @update_val_hw: bits to set regulator pins in HW control + * SysClkReq pins and logic will choose mode */ struct ab8500_ext_regulator_info { struct device *dev; struct regulator_desc desc; struct regulator_dev *rdev; + struct ab8500_ext_regulator_cfg *cfg; bool is_enabled; u8 update_bank; u8 update_reg; u8 update_mask; u8 update_val; - u8 update_val_en; - u8 update_val_en_lp; + u8 update_val_hp; + u8 update_val_lp; + u8 update_val_hw; }; -static int ab8500_ext_regulator_enable(struct regulator_dev *rdev) +static int enable(struct ab8500_ext_regulator_info *info, u8 *regval) { int ret; - struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); - if (info == NULL) { - dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); - return -EINVAL; - } + *regval = info->update_val; + + /* + * To satisfy both HW high power request and SW request, the regulator + * must be on in high power. + */ + if (info->cfg && info->cfg->hwreq) + *regval = info->update_val_hp; ret = abx500_mask_and_set_register_interruptible(info->dev, info->update_bank, info->update_reg, - info->update_mask, info->update_val); + info->update_mask, *regval); if (ret < 0) dev_err(rdev_get_dev(info->rdev), "couldn't set enable bits for regulator\n"); info->is_enabled = true; - dev_dbg(rdev_get_dev(rdev), "%s-enable (bank, reg, mask, value):" - " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", - info->desc.name, info->update_bank, info->update_reg, - info->update_mask, info->update_val); - return ret; } -static int ab8500_ext_regulator_disable(struct regulator_dev *rdev) +static int ab8500_ext_regulator_enable(struct regulator_dev *rdev) { int ret; struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); + u8 regval; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } + ret = enable(info, ®val); + + dev_dbg(rdev_get_dev(rdev), "%s-enable (bank, reg, mask, value):" + " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", + info->desc.name, info->update_bank, info->update_reg, + info->update_mask, regval); + + return ret; +} + +static int disable(struct ab8500_ext_regulator_info *info, u8 *regval) +{ + int ret; + + *regval = 0x0; + + /* + * Set the regulator in HW request mode if configured + */ + if (info->cfg && info->cfg->hwreq) + *regval = info->update_val_hw; + ret = abx500_mask_and_set_register_interruptible(info->dev, info->update_bank, info->update_reg, - info->update_mask, 0x0); + info->update_mask, *regval); if (ret < 0) dev_err(rdev_get_dev(info->rdev), "couldn't set disable bits for regulator\n"); info->is_enabled = false; + return ret; +} + +static int ab8500_ext_regulator_disable(struct regulator_dev *rdev) +{ + int ret; + struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); + u8 regval; + + if (info == NULL) { + dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); + return -EINVAL; + } + + ret = disable(info, ®val); + dev_dbg(rdev_get_dev(rdev), "%s-disable (bank, reg, mask, value):" " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", info->desc.name, info->update_bank, info->update_reg, - info->update_mask, 0x0); + info->update_mask, regval); return ret; } @@ -130,7 +171,8 @@ static int ab8500_ext_regulator_is_enabled(struct regulator_dev *rdev) info->desc.name, info->update_bank, info->update_reg, info->update_mask, regval); - if (regval & info->update_mask) + if (((regval & info->update_mask) == info->update_val_lp) || + ((regval & info->update_mask) == info->update_val_hp)) info->is_enabled = true; else info->is_enabled = false; @@ -241,7 +283,6 @@ static struct regulator_ops ab8500_ext_regulator_ops = { .list_voltage = ab8500_ext_list_voltage, }; - static struct ab8500_ext_regulator_info ab8500_ext_regulator_info[AB8500_NUM_EXT_REGULATORS] = { [AB8500_EXT_SUPPLY1] = { @@ -291,8 +332,9 @@ static struct ab8500_ext_regulator_info .update_reg = 0x08, .update_mask = 0x30, .update_val = 0x10, - .update_val_en = 0x10, - .update_val_en_lp = 0x30, + .update_val_hp = 0x10, + .update_val_lp = 0x30, + .update_val_hw = 0x20, }, }; @@ -333,8 +375,8 @@ int ab8500_ext_regulator_init(struct platform_device *pdev) /* VextSupply3LPn is inverted on AB8500 2.x */ info = &ab8500_ext_regulator_info[AB8500_EXT_SUPPLY3]; info->update_val = 0x30; - info->update_val_en = 0x30; - info->update_val_en_lp = 0x10; + info->update_val_hp = 0x30; + info->update_val_lp = 0x10; } /* register all regulators */ @@ -344,6 +386,8 @@ int ab8500_ext_regulator_init(struct platform_device *pdev) /* assign per-regulator data */ info = &ab8500_ext_regulator_info[i]; info->dev = &pdev->dev; + info->cfg = (struct ab8500_ext_regulator_cfg *) + pdata->ext_regulator[i].driver_data; config.dev = &pdev->dev; config.init_data = &pdata->ext_regulator[i]; diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index 4e92e5b879a5..cf496e93c0cf 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -143,6 +143,10 @@ enum ab9540_regulator_reg { }; /* AB8500 external regulators */ +struct ab8500_ext_regulator_cfg { + bool hwreq; /* requires hw mode or high power mode */ +}; + enum ab8500_ext_regulator_id { AB8500_EXT_SUPPLY1, AB8500_EXT_SUPPLY2, |