diff options
42 files changed, 346 insertions, 196 deletions
@@ -120,7 +120,6 @@ D: Author of lil (Linux Interrupt Latency benchmark) D: Fixed the shm swap deallocation at swapoff time (try_to_unuse message) D: VM hacker D: Various other kernel hacks -S: Via Cicalini 26 S: Imola 40026 S: Italy diff --git a/MAINTAINERS b/MAINTAINERS index 3d7d30dc5439..8db5c339845d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1752,7 +1752,8 @@ P: Ralf Baechle M: ralf@linux-mips.org W: http://www.linux-mips.org/ L: linux-mips@linux-mips.org -S: Maintained +T: git www.linux-mips.org:/pub/scm/linux.git +S: Supported MISCELLANEOUS MCA-SUPPORT P: James Bottomley @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 16 -EXTRAVERSION =-rc6 +EXTRAVERSION = NAME=Sliding Snow Leopard # *DOCUMENTATION* diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index eba7f53f8b4a..7007e1783797 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1029,6 +1029,16 @@ int __devinit smp_prepare_cpu(int cpu) int apicid, ret; lock_cpu_hotplug(); + + /* + * On x86, CPU0 is never offlined. Trying to bring up an + * already-booted CPU will hang. So check for that case. + */ + if (cpu_online(cpu)) { + ret = -EINVAL; + goto exit; + } + apicid = x86_cpu_to_apicid[cpu]; if (apicid == BAD_APICID) { ret = -ENODEV; diff --git a/arch/mips/Makefile b/arch/mips/Makefile index fe9da16f3a40..3d8dac681c63 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -108,7 +108,8 @@ MODFLAGS += -mlong-calls cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB) cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL) -cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer +cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ + -fno-omit-frame-pointer # # Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>) diff --git a/arch/mips/arc/misc.c b/arch/mips/arc/misc.c index 84867de22028..b2e10b9e9452 100644 --- a/arch/mips/arc/misc.c +++ b/arch/mips/arc/misc.c @@ -9,7 +9,6 @@ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) * Copyright (C) 1999 Silicon Graphics, Inc. */ -#include <linux/config.h> #include <linux/init.h> #include <linux/kernel.h> @@ -20,17 +19,11 @@ #include <asm/bootinfo.h> #include <asm/system.h> -extern void *sgiwd93_host; -extern void reset_wd33c93(void *instance); - VOID ArcHalt(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(halt); never: goto never; } @@ -40,9 +33,6 @@ ArcPowerDown(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(pdown); never: goto never; } @@ -53,9 +43,6 @@ ArcRestart(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(restart); never: goto never; } @@ -65,9 +52,6 @@ ArcReboot(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(reboot); never: goto never; } @@ -77,9 +61,6 @@ ArcEnterInteractiveMode(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(imode); never: goto never; } diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c index 4ffccedf5967..c93af224c1b3 100644 --- a/arch/mips/au1000/common/reset.c +++ b/arch/mips/au1000/common/reset.c @@ -164,17 +164,20 @@ void au1000_restart(char *command) void au1000_halt(void) { -#if defined(CONFIG_MIPS_PB1550) +#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) /* power off system */ - printk("\n** Powering off Pb1550\n"); + printk("\n** Powering off...\n"); au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); au_sync(); while(1); /* should not get here */ -#endif +#else printk(KERN_NOTICE "\n** You can safely turn off the power\n"); #ifdef CONFIG_MIPS_MIRAGE au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); #endif +#ifdef CONFIG_MIPS_DB1200 + au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C); +#endif #ifdef CONFIG_PM au_sleep(); @@ -187,6 +190,7 @@ void au1000_halt(void) "wait\n\t" ".set\tmips0"); #endif +#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */ } void au1000_power_off(void) diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 42c94c771afb..51273b7297a7 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -424,6 +424,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) unsigned long j; unsigned int count; + write_seqlock(&xtime_lock); + count = mips_hpt_read(); mips_timer_ack(); @@ -441,7 +443,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * CMOS clock accordingly every ~11 minutes. rtc_set_time() has to be * called as close as possible to 500 ms before the new second starts. */ - write_seqlock(&xtime_lock); if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && @@ -453,7 +454,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) last_rtc_update = xtime.tv_sec - 600; } } - write_sequnlock(&xtime_lock); /* * If jiffies has overflown in this timer_interrupt, we must @@ -496,6 +496,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) } } + write_sequnlock(&xtime_lock); + /* * In UP mode, we call local_timer_interrupt() to do profiling * and process accouting. diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 0668e9bfce41..9572ed44f0d5 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -375,6 +375,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm) struct flush_cache_page_args { struct vm_area_struct *vma; unsigned long addr; + unsigned long pfn; }; static inline void local_r4k_flush_cache_page(void *args) @@ -382,6 +383,7 @@ static inline void local_r4k_flush_cache_page(void *args) struct flush_cache_page_args *fcp_args = args; struct vm_area_struct *vma = fcp_args->vma; unsigned long addr = fcp_args->addr; + unsigned long paddr = fcp_args->pfn << PAGE_SHIFT; int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; pgd_t *pgdp; @@ -431,11 +433,12 @@ static inline void local_r4k_flush_cache_page(void *args) * Do indexed flush, too much work to get the (possible) TLB refills * to work correctly. */ - addr = INDEX_BASE + (addr & (dcache_size - 1)); if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) { - r4k_blast_dcache_page_indexed(addr); - if (exec && !cpu_icache_snoops_remote_store) - r4k_blast_scache_page_indexed(addr); + r4k_blast_dcache_page_indexed(cpu_has_pindexed_dcache ? + paddr : addr); + if (exec && !cpu_icache_snoops_remote_store) { + r4k_blast_scache_page_indexed(paddr); + } } if (exec) { if (cpu_has_vtag_icache) { @@ -455,6 +458,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma, args.vma = vma; args.addr = addr; + args.pfn = pfn; on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1); } @@ -956,6 +960,7 @@ static void __init probe_pcache(void) switch (c->cputype) { case CPU_20KC: case CPU_25KF: + c->dcache.flags |= MIPS_CACHE_PINDEX; case CPU_R10000: case CPU_R12000: case CPU_SB1: diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index 7c572bea4a98..fe232e3988e3 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -210,7 +210,6 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page * Do indexed flush, too much work to get the (possible) TLB refills * to work correctly. */ - page = (KSEG0 + (page & (dcache_size - 1))); if (cpu_has_dc_aliases || exec) tx39_blast_dcache_page_indexed(page); if (exec) diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index 511c89d65f38..1588f6debd90 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -47,23 +47,51 @@ #define IMR_IP3_VAL K_INT_MAP_I1 #define IMR_IP4_VAL K_INT_MAP_I2 +#define SB1250_HPT_NUM 3 +#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */ +#define SB1250_HPT_SHIFT ((sizeof(unsigned int)*8)-V_SCD_TIMER_WIDTH) + + extern int sb1250_steal_irq(int irq); +static unsigned int sb1250_hpt_read(void); +static void sb1250_hpt_init(unsigned int); + +static unsigned int hpt_offset; + +void __init sb1250_hpt_setup(void) +{ + int cpu = smp_processor_id(); + + if (!cpu) { + /* Setup hpt using timer #3 but do not enable irq for it */ + __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); + __raw_writeq(SB1250_HPT_VALUE, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_INIT))); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); + + /* + * we need to fill 32 bits, so just use the upper 23 bits and pretend + * the timer is going 512Mhz instead of 1Mhz + */ + mips_hpt_frequency = V_SCD_TIMER_FREQ << SB1250_HPT_SHIFT; + mips_hpt_init = sb1250_hpt_init; + mips_hpt_read = sb1250_hpt_read; + } +} + + void sb1250_time_init(void) { int cpu = smp_processor_id(); int irq = K_INT_TIMER_0+cpu; - /* Only have 4 general purpose timers */ - if (cpu > 3) { + /* Only have 4 general purpose timers, and we use last one as hpt */ + if (cpu > 2) { BUG(); } - if (!cpu) { - /* Use our own gettimeoffset() routine */ - do_gettimeoffset = sb1250_gettimeoffset; - } - sb1250_mask_irq(cpu, irq); /* Map the timer interrupt to ip[4] of this cpu */ @@ -75,10 +103,10 @@ void sb1250_time_init(void) /* Disable the timer and set up the count */ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); #ifdef CONFIG_SIMULATION - __raw_writeq(50000 / HZ, + __raw_writeq((50000 / HZ) - 1, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #else - __raw_writeq(1000000 / HZ, + __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #endif @@ -103,7 +131,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs) int cpu = smp_processor_id(); int irq = K_INT_TIMER_0 + cpu; - /* Reset the timer */ + /* ACK interrupt */ ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); @@ -122,15 +150,26 @@ void sb1250_timer_interrupt(struct pt_regs *regs) } /* - * We use our own do_gettimeoffset() instead of the generic one, - * because the generic one does not work for SMP case. - * In addition, since we use general timer 0 for system time, - * we can get accurate intra-jiffy offset without calibration. + * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over + * again. There's no easy way to set to a specific value so store init value + * in hpt_offset and subtract each time. + * + * Note: Timer isn't full 32bits so shift it into the upper part making + * it appear to run at a higher frequency. */ -unsigned long sb1250_gettimeoffset(void) +static unsigned int sb1250_hpt_read(void) { - unsigned long count = - __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT))); + unsigned int count; - return 1000000/HZ - count; - } + count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT)))); + + count = (SB1250_HPT_VALUE - count) << SB1250_HPT_SHIFT; + + return count - hpt_offset; +} + +static void sb1250_hpt_init(unsigned int count) +{ + hpt_offset = count; + return; +} diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index b614ca0ddb69..b661d2425a36 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -70,6 +70,12 @@ const char *get_system_type(void) return "SiByte " SIBYTE_BOARD_NAME; } +void __init swarm_time_init(void) +{ + /* Setup HPT */ + sb1250_hpt_setup(); +} + void __init swarm_timer_setup(struct irqaction *irq) { /* @@ -109,6 +115,7 @@ void __init plat_setup(void) panic_timeout = 5; /* For debug. */ + board_time_init = swarm_time_init; board_timer_setup = swarm_timer_setup; board_be_handler = swarm_be_handler; diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index ab89278a56bf..697aacafb02a 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -103,9 +103,15 @@ static int stripe_ctr(struct dm_target *ti, unsigned int argc, char **argv) return -EINVAL; } + if (((uint32_t)ti->len) & (chunk_size - 1)) { + ti->error = "dm-stripe: Target length not divisible by " + "chunk size"; + return -EINVAL; + } + width = ti->len; if (sector_div(width, stripes)) { - ti->error = "dm-stripe: Target length not divisable by " + ti->error = "dm-stripe: Target length not divisible by " "number of stripes"; return -EINVAL; } diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index e99dfbbf3e95..87d79df05336 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -15,20 +15,6 @@ config VIDEO_CX88 To compile this driver as a module, choose M here: the module will be called cx8800 -config VIDEO_CX88_DVB - tristate "DVB/ATSC Support for cx2388x based TV cards" - depends on VIDEO_CX88 && DVB_CORE - select VIDEO_BUF_DVB - ---help--- - This adds support for DVB/ATSC cards based on the - Connexant 2388x chip. - - To compile this driver as a module, choose M here: the - module will be called cx88-dvb. - - You must also select one or more DVB/ATSC demodulators. - If you are unsure which you need, choose all of them. - config VIDEO_CX88_ALSA tristate "ALSA DMA audio support" depends on VIDEO_CX88 && SND && EXPERIMENTAL @@ -44,6 +30,20 @@ config VIDEO_CX88_ALSA To compile this driver as a module, choose M here: the module will be called cx88-alsa. +config VIDEO_CX88_DVB + tristate "DVB/ATSC Support for cx2388x based TV cards" + depends on VIDEO_CX88 && DVB_CORE + select VIDEO_BUF_DVB + ---help--- + This adds support for DVB/ATSC cards based on the + Connexant 2388x chip. + + To compile this driver as a module, choose M here: the + module will be called cx88-dvb. + + You must also select one or more DVB/ATSC demodulators. + If you are unsure which you need, choose all of them. + config VIDEO_CX88_DVB_ALL_FRONTENDS bool "Build all supported frontends for cx2388x based TV cards" default y diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 94a14a2bb6d6..5b267808a9d4 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -367,6 +367,9 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) em28xx_capture_start(dev, 1); em28xx_resolution_set(dev); + /* device needs to be initialized before isoc transfer */ + video_mux(dev, 0); + /* start the transfer */ errCode = em28xx_init_isoc(dev); if (errCode) diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index 2c5b849b7ba4..30ff8ea1a402 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1021,7 +1021,7 @@ static void restart_tx_queues(struct sge *sge) if (test_and_clear_bit(nd->if_port, &sge->stopped_tx_queues) && netif_running(nd)) { - sge->stats.cmdQ_restarted[3]++; + sge->stats.cmdQ_restarted[2]++; netif_wake_queue(nd); } } @@ -1350,7 +1350,7 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, if (unlikely(credits < count)) { netif_stop_queue(dev); set_bit(dev->if_port, &sge->stopped_tx_queues); - sge->stats.cmdQ_full[3]++; + sge->stats.cmdQ_full[2]++; spin_unlock(&q->lock); if (!netif_queue_stopped(dev)) CH_ERR("%s: Tx ring full while queue awake!\n", @@ -1358,7 +1358,7 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, return NETDEV_TX_BUSY; } if (unlikely(credits - count < q->stop_thres)) { - sge->stats.cmdQ_full[3]++; + sge->stats.cmdQ_full[2]++; netif_stop_queue(dev); set_bit(dev->if_port, &sge->stopped_tx_queues); } diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 24253c807e55..f57a85feda3d 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2154,6 +2154,9 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) msleep(10); + pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, + RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), skb->data, ETH_DATA_LEN)) err = -EAGAIN; @@ -2161,8 +2164,8 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) err_loopback_none: mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0); nic->loopback = lb_none; - e100_hw_init(nic); e100_clean_cbs(nic); + e100_hw_reset(nic); err_clean_rx: e100_rx_clean_list(nic); return err; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4c4db96d0b7b..84dcca3776ee 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3710,7 +3710,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, e1000_rx_checksum(adapter, (uint32_t)(status) | ((uint32_t)(rx_desc->errors) << 24), - rx_desc->csum, skb); + le16_to_cpu(rx_desc->csum), skb); skb->protocol = eth_type_trans(skb, netdev); #ifdef CONFIG_E1000_NAPI @@ -3854,11 +3854,11 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, } e1000_rx_checksum(adapter, staterr, - rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb); skb->protocol = eth_type_trans(skb, netdev); if (likely(rx_desc->wb.upper.header_status & - E1000_RXDPS_HDRSTAT_HDRSP)) + cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))) adapter->rx_hdr_split++; #ifdef CONFIG_E1000_NAPI if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { @@ -3884,7 +3884,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, #endif next_desc: - rx_desc->wb.middle.status_error &= ~0xFF; + rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF); buffer_info->skb = NULL; /* return some buffers to hardware, one at a time is too slow */ diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index b8f1524da557..caf4102b54ce 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -9552,12 +9552,36 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) } } - /* Find msi capability. */ + /* The EPB bridge inside 5714, 5715, and 5780 cannot support + * DMA addresses > 40-bit. This bridge may have other additional + * 57xx devices behind it in some 4-port NIC designs for example. + * Any tg3 device found behind the bridge will also need the 40-bit + * DMA workaround. + */ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { tp->tg3_flags2 |= TG3_FLG2_5780_CLASS; + tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG; tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI); } + else { + struct pci_dev *bridge = NULL; + + do { + bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_EPB, + bridge); + if (bridge && bridge->subordinate && + (bridge->subordinate->number <= + tp->pdev->bus->number) && + (bridge->subordinate->subordinate >= + tp->pdev->bus->number)) { + tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG; + pci_dev_put(bridge); + break; + } + } while (bridge); + } /* Initialize misc host control in PCI block. */ tp->misc_host_ctrl |= (misc_ctrl_reg & @@ -10303,7 +10327,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f); - if (ccval == 0x6 || ccval == 0x7) + /* If the 5704 is behind the EPB bridge, we can + * do the less restrictive ONE_DMA workaround for + * better performance. + */ + if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) && + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) + tp->dma_rwctrl |= 0x8000; + else if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; /* Set bit 23 to enable PCIX hw bug fix */ @@ -10759,19 +10790,20 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, goto err_out_iounmap; } - /* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit. + /* The EPB bridge inside 5714, 5715, and 5780 and any + * device behind the EPB cannot support DMA addresses > 40-bit. * On 64-bit systems with IOMMU, use 40-bit dma_mask. * On 64-bit systems without IOMMU, use 64-bit dma_mask and * do DMA address check in tg3_start_xmit(). */ - if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { + if (tp->tg3_flags2 & TG3_FLG2_IS_5788) + persist_dma_mask = dma_mask = DMA_32BIT_MASK; + else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) { persist_dma_mask = dma_mask = DMA_40BIT_MASK; #ifdef CONFIG_HIGHMEM dma_mask = DMA_64BIT_MASK; #endif - } else if (tp->tg3_flags2 & TG3_FLG2_IS_5788) - persist_dma_mask = dma_mask = DMA_32BIT_MASK; - else + } else persist_dma_mask = dma_mask = DMA_64BIT_MASK; /* Configure DMA attributes. */ @@ -10908,8 +10940,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0, (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0, (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0); - printk(KERN_INFO "%s: dma_rwctrl[%08x]\n", - dev->name, tp->dma_rwctrl); + printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n", + dev->name, tp->dma_rwctrl, + (pdev->dma_mask == DMA_32BIT_MASK) ? 32 : + (((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64)); return 0; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 7f4b7f6ac40d..7e3b613afb29 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2163,6 +2163,7 @@ struct tg3 { #define TG3_FLAG_10_100_ONLY 0x01000000 #define TG3_FLAG_PAUSE_AUTONEG 0x02000000 #define TG3_FLAG_IN_RESET_TASK 0x04000000 +#define TG3_FLAG_40BIT_DMA_BUG 0x08000000 #define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000 #define TG3_FLAG_GOT_SERDES_FLOWCTL 0x20000000 #define TG3_FLAG_SPLIT_MODE 0x40000000 diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c index ae6d032b9b59..cd5eeb032d64 100644 --- a/fs/9p/vfs_dir.c +++ b/fs/9p/vfs_dir.c @@ -202,7 +202,6 @@ int v9fs_dir_release(struct inode *inode, struct file *filp) filp->private_data = NULL; } - d_drop(filp->f_dentry); return 0; } diff --git a/fs/nfsctl.c b/fs/nfsctl.c index 0d4cf9486068..1c72c7f85ddc 100644 --- a/fs/nfsctl.c +++ b/fs/nfsctl.c @@ -98,10 +98,8 @@ asmlinkage sys_nfsservctl(int cmd, struct nfsctl_arg __user *arg, void __user *r if (copy_from_user(&version, &arg->ca_version, sizeof(int))) return -EFAULT; - if (version != NFSCTL_VERSION) { - printk(KERN_WARNING "nfsd: incompatible version in syscall.\n"); + if (version != NFSCTL_VERSION) return -EINVAL; - } if (cmd < 0 || cmd >= sizeof(map)/sizeof(map[0]) || !map[cmd].name) return -EINVAL; diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h index 78c9cc2735d5..3f2b6d9ac45e 100644 --- a/include/asm-mips/cpu-features.h +++ b/include/asm-mips/cpu-features.h @@ -96,6 +96,9 @@ #ifndef cpu_has_ic_fills_f_dc #define cpu_has_ic_fills_f_dc (cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC) #endif +#ifndef cpu_has_pindexed_dcache +#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) +#endif /* * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h index d5cf519f8fcc..140be1c67da7 100644 --- a/include/asm-mips/cpu-info.h +++ b/include/asm-mips/cpu-info.h @@ -39,6 +39,7 @@ struct cache_desc { #define MIPS_CACHE_ALIASES 0x00000004 /* Cache could have aliases */ #define MIPS_CACHE_IC_F_DC 0x00000008 /* Ic can refill from D-cache */ #define MIPS_IC_SNOOPS_REMOTE 0x00000010 /* Ic snoops remote stores */ +#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */ struct cpuinfo_mips { unsigned long udelay_val; diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h index 6111a0ce58c4..feb29a793888 100644 --- a/include/asm-mips/hazards.h +++ b/include/asm-mips/hazards.h @@ -3,7 +3,9 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2003, 2004 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) MIPS Technologies, Inc. + * written by Ralf Baechle <ralf@linux-mips.org> */ #ifndef _ASM_HAZARDS_H #define _ASM_HAZARDS_H @@ -74,8 +76,7 @@ #define irq_disable_hazard _ehb -#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \ - defined(CONFIG_CPU_SB1) +#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. @@ -99,13 +100,13 @@ #else /* __ASSEMBLY__ */ __asm__( - " .macro _ssnop \n\t" - " sll $0, $0, 1 \n\t" - " .endm \n\t" - " \n\t" - " .macro _ehb \n\t" - " sll $0, $0, 3 \n\t" - " .endm \n\t"); + " .macro _ssnop \n" + " sll $0, $0, 1 \n" + " .endm \n" + " \n" + " .macro _ehb \n" + " sll $0, $0, 3 \n" + " .endm \n"); #ifdef CONFIG_CPU_RM9000 @@ -117,17 +118,21 @@ __asm__( #define mtc0_tlbw_hazard() \ __asm__ __volatile__( \ - ".set\tmips32\n\t" \ - "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \ - ".set\tmips0") + " .set mips32 \n" \ + " _ssnop \n" \ + " _ssnop \n" \ + " _ssnop \n" \ + " _ssnop \n" \ + " .set mips0 \n") #define tlbw_use_hazard() \ __asm__ __volatile__( \ - ".set\tmips32\n\t" \ - "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \ - ".set\tmips0") - -#define back_to_back_c0_hazard() do { } while (0) + " .set mips32 \n" \ + " _ssnop \n" \ + " _ssnop \n" \ + " _ssnop \n" \ + " _ssnop \n" \ + " .set mips0 \n") #else @@ -136,15 +141,25 @@ __asm__( */ #define mtc0_tlbw_hazard() \ __asm__ __volatile__( \ - ".set noreorder\n\t" \ - "nop; nop; nop; nop; nop; nop;\n\t" \ - ".set reorder\n\t") + " .set noreorder \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + " .set reorder \n") #define tlbw_use_hazard() \ __asm__ __volatile__( \ - ".set noreorder\n\t" \ - "nop; nop; nop; nop; nop; nop;\n\t" \ - ".set reorder\n\t") + " .set noreorder \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + " .set reorder \n") #endif @@ -156,49 +171,26 @@ __asm__( #ifdef CONFIG_CPU_MIPSR2 -__asm__( - " .macro\tirq_enable_hazard \n\t" - " _ehb \n\t" - " .endm \n\t" - " \n\t" - " .macro\tirq_disable_hazard \n\t" - " _ehb \n\t" - " .endm \n\t" - " \n\t" - " .macro\tback_to_back_c0_hazard \n\t" - " _ehb \n\t" - " .endm"); - -#define irq_enable_hazard() \ - __asm__ __volatile__( \ - "irq_enable_hazard") +__asm__(" .macro irq_enable_hazard \n" + " _ehb \n" + " .endm \n" + " \n" + " .macro irq_disable_hazard \n" + " _ehb \n" + " .endm \n"); -#define irq_disable_hazard() \ - __asm__ __volatile__( \ - "irq_disable_hazard") - -#define back_to_back_c0_hazard() \ - __asm__ __volatile__( \ - "back_to_back_c0_hazard") - -#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \ - defined(CONFIG_CPU_SB1) +#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. */ __asm__( - " .macro\tirq_enable_hazard \n\t" - " .endm \n\t" - " \n\t" - " .macro\tirq_disable_hazard \n\t" - " .endm"); - -#define irq_enable_hazard() do { } while (0) -#define irq_disable_hazard() do { } while (0) - -#define back_to_back_c0_hazard() do { } while (0) + " .macro irq_enable_hazard \n" + " .endm \n" + " \n" + " .macro irq_disable_hazard \n" + " .endm \n"); #else @@ -209,29 +201,63 @@ __asm__( */ __asm__( - " # \n\t" - " # There is a hazard but we do not care \n\t" - " # \n\t" - " .macro\tirq_enable_hazard \n\t" - " .endm \n\t" - " \n\t" - " .macro\tirq_disable_hazard \n\t" - " _ssnop; _ssnop; _ssnop \n\t" - " .endm"); + " # \n" + " # There is a hazard but we do not care \n" + " # \n" + " .macro\tirq_enable_hazard \n" + " .endm \n" + " \n" + " .macro\tirq_disable_hazard \n" + " _ssnop \n" + " _ssnop \n" + " _ssnop \n" + " .endm \n"); -#define irq_enable_hazard() do { } while (0) +#endif + +#define irq_enable_hazard() \ + __asm__ __volatile__("irq_enable_hazard") #define irq_disable_hazard() \ - __asm__ __volatile__( \ - "irq_disable_hazard") + __asm__ __volatile__("irq_disable_hazard") -#define back_to_back_c0_hazard() \ - __asm__ __volatile__( \ - " .set noreorder \n" \ - " nop; nop; nop \n" \ - " .set reorder \n") + +/* + * Back-to-back hazards - + * + * What is needed to separate a move to cp0 from a subsequent read from the + * same cp0 register? + */ +#ifdef CONFIG_CPU_MIPSR2 + +__asm__(" .macro back_to_back_c0_hazard \n" + " _ehb \n" + " .endm \n"); + +#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \ + defined(CONFIG_CPU_SB1) + +__asm__(" .macro back_to_back_c0_hazard \n" + " .endm \n"); + +#else + +__asm__(" .macro back_to_back_c0_hazard \n" + " .set noreorder \n" + " _ssnop \n" + " _ssnop \n" + " _ssnop \n" + " .set reorder \n" + " .endm"); #endif +#define back_to_back_c0_hazard() \ + __asm__ __volatile__("back_to_back_c0_hazard") + + +/* + * Instruction execution hazard + */ #ifdef CONFIG_CPU_MIPSR2 /* * gcc has a tradition of misscompiling the previous construct using the diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 8c011aa61afa..ba1d7bbc15d2 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -4,7 +4,7 @@ * for more details. * * Copyright (C) 1994, 1995 Waldorf GmbH - * Copyright (C) 1994 - 2000 Ralf Baechle + * Copyright (C) 1994 - 2000, 06 Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. * Author: Maciej W. Rozycki <macro@mips.com> @@ -103,8 +103,20 @@ */ extern const unsigned long mips_io_port_base; -#define set_io_port_base(base) \ - do { * (unsigned long *) &mips_io_port_base = (base); } while (0) +/* + * Gcc will generate code to load the value of mips_io_port_base after each + * function call which may be fairly wasteful in some cases. So we don't + * play quite by the book. We tell gcc mips_io_port_base is a long variable + * which solves the code generation issue. Now we need to violate the + * aliasing rules a little to make initialization possible and finally we + * will need the barrier() to fight side effects of the aliasing chat. + * This trickery will eventually collapse under gcc's optimizer. Oh well. + */ +static inline void set_io_port_base(unsigned long base) +{ + * (unsigned long *) &mips_io_port_base = base; + barrier(); +} /* * Thanks to James van Artsdalen for a better timing-fix than diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h index 9632c27dad15..0bcb79a58ee9 100644 --- a/include/asm-mips/r4kcache.h +++ b/include/asm-mips/r4kcache.h @@ -257,7 +257,8 @@ static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \ \ static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \ { \ - unsigned long start = page; \ + unsigned long indexmask = current_cpu_data.desc.waysize - 1; \ + unsigned long start = INDEX_BASE + (page & indexmask); \ unsigned long end = start + PAGE_SIZE; \ unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \ unsigned long ws_end = current_cpu_data.desc.ways << \ diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h index a474c29cd701..b09e16c93ca0 100644 --- a/include/asm-mips/sibyte/sb1250.h +++ b/include/asm-mips/sibyte/sb1250.h @@ -45,8 +45,8 @@ extern unsigned int soc_type; extern unsigned int periph_rev; extern unsigned int zbbus_mhz; +extern void sb1250_hpt_setup(void); extern void sb1250_time_init(void); -extern unsigned long sb1250_gettimeoffset(void); extern void sb1250_mask_irq(int cpu, int irq); extern void sb1250_unmask_irq(int cpu, int irq); extern void sb1250_smp_finish(void); diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h index a667bc14a7cd..f4178bdcfcb0 100644 --- a/include/asm-mips/sibyte/sb1250_scd.h +++ b/include/asm-mips/sibyte/sb1250_scd.h @@ -359,14 +359,15 @@ */ #define V_SCD_TIMER_FREQ 1000000 +#define V_SCD_TIMER_WIDTH 23 #define S_SCD_TIMER_INIT 0 -#define M_SCD_TIMER_INIT _SB_MAKEMASK(20,S_SCD_TIMER_INIT) +#define M_SCD_TIMER_INIT _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_INIT) #define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x,S_SCD_TIMER_INIT) #define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT) #define S_SCD_TIMER_CNT 0 -#define M_SCD_TIMER_CNT _SB_MAKEMASK(20,S_SCD_TIMER_CNT) +#define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_CNT) #define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x,S_SCD_TIMER_CNT) #define G_SCD_TIMER_CNT(x) _SB_GETVALUE(x,S_SCD_TIMER_CNT,M_SCD_TIMER_CNT) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 1709b5009d2e..751eea58bde8 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1365,6 +1365,7 @@ #define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008 #define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009 #define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017 +#define PCI_DEVICE_ID_SERVERWORKS_EPB 0x0103 #define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200 #define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201 #define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203 diff --git a/include/net/ax25.h b/include/net/ax25.h index 2250a18b0cbb..d052b221dbcd 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -110,8 +110,15 @@ enum { enum { AX25_PROTO_STD_SIMPLEX, AX25_PROTO_STD_DUPLEX, +#ifdef CONFIG_AX25_DAMA_SLAVE AX25_PROTO_DAMA_SLAVE, - AX25_PROTO_DAMA_MASTER +#ifdef CONFIG_AX25_DAMA_MASTER + AX25_PROTO_DAMA_MASTER, +#define AX25_PROTO_MAX AX25_PROTO_DAMA_MASTER +#endif +#endif + __AX25_PROTO_MAX, + AX25_PROTO_MAX = __AX25_PROTO_MAX -1 }; enum { diff --git a/include/net/sock.h b/include/net/sock.h index 30758035d616..f63d0d56712c 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -478,9 +478,9 @@ static inline void sk_add_backlog(struct sock *sk, struct sk_buff *skb) rc = __condition; \ if (!rc) { \ *(__timeo) = schedule_timeout(*(__timeo)); \ - rc = __condition; \ } \ lock_sock(__sk); \ + rc = __condition; \ rc; \ }) diff --git a/kernel/fork.c b/kernel/fork.c index ccdfbb16c86d..b373322ca497 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1478,9 +1478,7 @@ static int unshare_vm(unsigned long unshare_flags, struct mm_struct **new_mmp) if ((unshare_flags & CLONE_VM) && (mm && atomic_read(&mm->mm_users) > 1)) { - *new_mmp = dup_mm(current); - if (!*new_mmp) - return -ENOMEM; + return -EINVAL; } return 0; @@ -1569,7 +1567,7 @@ asmlinkage long sys_unshare(unsigned long unshare_flags) if (new_sigh) { sigh = current->sighand; - current->sighand = new_sigh; + rcu_assign_pointer(current->sighand, new_sigh); new_sigh = sigh; } diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index 216f574b5ffb..fa895fc2ecf5 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -353,6 +353,7 @@ static int posix_timer_fn(void *data) hrtimer_forward(&timr->it.real.timer, timr->it.real.interval); ret = HRTIMER_RESTART; + ++timr->it_requeue_pending; } } diff --git a/kernel/timer.c b/kernel/timer.c index bf7c4193b936..2410c18dbeb1 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1354,8 +1354,8 @@ void __init init_timers(void) #ifdef CONFIG_TIME_INTERPOLATION -struct time_interpolator *time_interpolator; -static struct time_interpolator *time_interpolator_list; +struct time_interpolator *time_interpolator __read_mostly; +static struct time_interpolator *time_interpolator_list __read_mostly; static DEFINE_SPINLOCK(time_interpolator_lock); static inline u64 time_interpolator_get_cycles(unsigned int src) diff --git a/mm/memory.c b/mm/memory.c index 9abc6008544b..85e80a57db29 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -623,11 +623,12 @@ static unsigned long zap_pte_range(struct mmu_gather *tlb, (*zap_work)--; continue; } + + (*zap_work) -= PAGE_SIZE; + if (pte_present(ptent)) { struct page *page; - (*zap_work) -= PAGE_SIZE; - page = vm_normal_page(vma, addr, ptent); if (unlikely(details) && page) { /* diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 2a8206009422..b21869a39f0b 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -330,9 +330,19 @@ check_range(struct mm_struct *mm, unsigned long start, unsigned long end, int err; struct vm_area_struct *first, *vma, *prev; - /* Clear the LRU lists so pages can be isolated */ - if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL)) + if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL)) { + /* Must have swap device for migration */ + if (nr_swap_pages <= 0) + return ERR_PTR(-ENODEV); + + /* + * Clear the LRU lists so pages can be isolated. + * Note that pages may be moved off the LRU after we have + * drained them. Those pages will fail to migrate like other + * pages that may be busy. + */ lru_add_drain_all(); + } first = find_vma(mm, start); if (!first) diff --git a/mm/swap.c b/mm/swap.c index e9ec06d845e8..b524ea90bddb 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -393,7 +393,8 @@ void pagevec_strip(struct pagevec *pvec) struct page *page = pvec->pages[i]; if (PagePrivate(page) && !TestSetPageLocked(page)) { - try_to_release_page(page, 0); + if (PagePrivate(page)) + try_to_release_page(page, 0); unlock_page(page); } } diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c index f67711f2ee96..894a22558d9d 100644 --- a/net/ax25/sysctl_net_ax25.c +++ b/net/ax25/sysctl_net_ax25.c @@ -24,7 +24,7 @@ static int min_t3[1], max_t3[] = {3600 * HZ}; static int min_idle[1], max_idle[] = {65535 * HZ}; static int min_n2[] = {1}, max_n2[] = {31}; static int min_paclen[] = {1}, max_paclen[] = {512}; -static int min_proto[1], max_proto[] = {3}; +static int min_proto[1], max_proto[] = { AX25_PROTO_MAX }; static int min_ds_timeout[1], max_ds_timeout[] = {65535 * HZ}; static struct ctl_table_header *ax25_table_header; diff --git a/net/ieee80211/ieee80211_crypt_ccmp.c b/net/ieee80211/ieee80211_crypt_ccmp.c index 470221728503..3840d1911f2b 100644 --- a/net/ieee80211/ieee80211_crypt_ccmp.c +++ b/net/ieee80211/ieee80211_crypt_ccmp.c @@ -131,7 +131,7 @@ static void ccmp_init_blocks(struct crypto_tfm *tfm, a4_included = ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)); qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) && - (WLAN_FC_GET_STYPE(fc) & 0x08)); + (WLAN_FC_GET_STYPE(fc) & IEEE80211_STYPE_QOS_DATA)); aad_len = 22; if (a4_included) aad_len += 6; diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index b410ab8bcf7a..7ac6a7165d9c 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -1417,10 +1417,10 @@ static void ieee80211_process_probe_response(struct ieee80211_device if (is_beacon(beacon->header.frame_ctl)) { if (ieee->handle_beacon != NULL) - ieee->handle_beacon(dev, beacon, &network); + ieee->handle_beacon(dev, beacon, target); } else { if (ieee->handle_probe_response != NULL) - ieee->handle_probe_response(dev, beacon, &network); + ieee->handle_probe_response(dev, beacon, target); } } diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index f70ff13d4818..b8b2a560b26b 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -508,12 +508,7 @@ buf_printf(struct buffer *buf, const char *fmt, ...) va_start(ap, fmt); len = vsnprintf(tmp, SZ, fmt, ap); - if (buf->size - buf->pos < len + 1) { - buf->size += 128; - buf->p = realloc(buf->p, buf->size); - } - strncpy(buf->p + buf->pos, tmp, len + 1); - buf->pos += len; + buf_write(buf, tmp, len); va_end(ap); } @@ -521,7 +516,7 @@ void buf_write(struct buffer *buf, const char *s, int len) { if (buf->size - buf->pos < len) { - buf->size += len; + buf->size += len + SZ; buf->p = realloc(buf->p, buf->size); } strncpy(buf->p + buf->pos, s, len); |