diff options
55 files changed, 3004 insertions, 2167 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 97ad190e13af..6bf68053e4b8 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -122,3 +122,10 @@ Description: This symbolic link appears when a device is a Virtual Function. The symbolic link points to the PCI device sysfs entry of the Physical Function this device associates with. + +What: /sys/bus/pci/slots/.../module +Date: June 2009 +Contact: linux-pci@vger.kernel.org +Description: + This symbolic link points to the PCI hotplug controller driver + module that manages the hotplug slot. diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt index ddeb14beacc8..be21001ab144 100644 --- a/Documentation/PCI/pcieaer-howto.txt +++ b/Documentation/PCI/pcieaer-howto.txt @@ -61,6 +61,10 @@ be initiated although firmwares have no _OSC support. To enable the walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line when booting kernel. Note that forceload=n by default. +nosourceid, another parameter of type bool, can be used when broken +hardware (mostly chipsets) has root ports that cannot obtain the reporting +source ID. nosourceid=n by default. + 2.3 AER error output When a PCI-E AER error is captured, an error message will be outputed to console. If it's a correctable error, it is outputed as a warning. @@ -246,3 +250,24 @@ with the PCI Express AER Root driver? A: It could call the helper functions to enable AER in devices and cleanup uncorrectable status register. Pls. refer to section 3.3. + +4. Software error injection + +Debugging PCIE AER error recovery code is quite difficult because it +is hard to trigger real hardware errors. Software based error +injection can be used to fake various kinds of PCIE errors. + +First you should enable PCIE AER software error injection in kernel +configuration, that is, following item should be in your .config. + +CONFIG_PCIEAER_INJECT=y or CONFIG_PCIEAER_INJECT=m + +After reboot with new kernel or insert the module, a device file named +/dev/aer_inject should be created. + +Then, you need a user space tool named aer-inject, which can be gotten +from: + http://www.kernel.org/pub/linux/utils/pci/aer-inject/ + +More information about aer-inject can be found in the document comes +with its source code. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 08def8deb5f5..7da0899d1fb9 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1776,6 +1776,9 @@ and is between 256 and 4096 characters. It is defined in the file root domains (aka PCI segments, in ACPI-speak). nommconf [X86] Disable use of MMCONFIG for PCI Configuration + check_enable_amd_mmconf [X86] check for and enable + properly configured MMIO access to PCI + config space on AMD family 10h CPU nomsi [MSI] If the PCI_MSI kernel config parameter is enabled, this kernel boot option can be used to disable the use of MSI interrupts system-wide. @@ -1828,7 +1831,7 @@ and is between 256 and 4096 characters. It is defined in the file IRQ routing is enabled. noacpi [X86] Do not use ACPI for IRQ routing or for PCI scanning. - use_crs [X86] Use _CRS for PCI resource + nocrs [X86] Don't use _CRS for PCI resource allocation. routeirq Do IRQ routing for all PCI devices. This is normally done in pci_enable_device(), @@ -1865,6 +1868,12 @@ and is between 256 and 4096 characters. It is defined in the file PAGE_SIZE is used as alignment. PCI-PCI bridge can be specified, if resource windows need to be expanded. + ecrc= Enable/disable PCIe ECRC (transaction layer + end-to-end CRC checking). + bios: Use BIOS/firmware settings. This is the + the default. + off: Turn ECRC off + on: Turn ECRC on. pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power Management. diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 9a2a6e32f00f..0e8db6771252 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -122,7 +122,7 @@ static void eeh_enable_irq(struct pci_dev *dev) * passed back in "userdata". */ -static void eeh_report_error(struct pci_dev *dev, void *userdata) +static int eeh_report_error(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; @@ -130,19 +130,21 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata) dev->error_state = pci_channel_io_frozen; if (!driver) - return; + return 0; eeh_disable_irq(dev); if (!driver->err_handler || !driver->err_handler->error_detected) - return; + return 0; rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen); /* A driver that needs a reset trumps all others */ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; + + return 0; } /** @@ -153,7 +155,7 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata) * Cumulative response passed back in "userdata". */ -static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) +static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; @@ -161,26 +163,28 @@ static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) if (!driver || !driver->err_handler || !driver->err_handler->mmio_enabled) - return; + return 0; rc = driver->err_handler->mmio_enabled (dev); /* A driver that needs a reset trumps all others */ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; + + return 0; } /** * eeh_report_reset - tell device that slot has been reset */ -static void eeh_report_reset(struct pci_dev *dev, void *userdata) +static int eeh_report_reset(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; if (!driver) - return; + return 0; dev->error_state = pci_channel_io_normal; @@ -188,35 +192,39 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) if (!driver->err_handler || !driver->err_handler->slot_reset) - return; + return 0; rc = driver->err_handler->slot_reset(dev); if ((*res == PCI_ERS_RESULT_NONE) || (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc; if (*res == PCI_ERS_RESULT_DISCONNECT && rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; + + return 0; } /** * eeh_report_resume - tell device to resume normal operations */ -static void eeh_report_resume(struct pci_dev *dev, void *userdata) +static int eeh_report_resume(struct pci_dev *dev, void *userdata) { struct pci_driver *driver = dev->driver; dev->error_state = pci_channel_io_normal; if (!driver) - return; + return 0; eeh_enable_irq(dev); if (!driver->err_handler || !driver->err_handler->resume) - return; + return 0; driver->err_handler->resume(dev); + + return 0; } /** @@ -226,22 +234,24 @@ static void eeh_report_resume(struct pci_dev *dev, void *userdata) * dead, and that no further recovery attempts will be made on it. */ -static void eeh_report_failure(struct pci_dev *dev, void *userdata) +static int eeh_report_failure(struct pci_dev *dev, void *userdata) { struct pci_driver *driver = dev->driver; dev->error_state = pci_channel_io_perm_failure; if (!driver) - return; + return 0; eeh_disable_irq(dev); if (!driver->err_handler || !driver->err_handler->error_detected) - return; + return 0; driver->err_handler->error_detected(dev, pci_channel_io_perm_failure); + + return 0; } /* ------------------------------------------------------- */ diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index b51a1e8b0baf..927958d13c19 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -130,6 +130,7 @@ extern void pci_iommu_alloc(void); /* generic pci stuff */ #include <asm-generic/pci.h> +#define PCIBIOS_MAX_MEM_32 0xffffffff #ifdef CONFIG_NUMA /* Returns the node based on pci bus */ diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index e60fd3e14bdf..cb739cc0a080 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -25,7 +25,7 @@ #define PCI_BIOS_IRQ_SCAN 0x2000 #define PCI_ASSIGN_ALL_BUSSES 0x4000 #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 -#define PCI_USE__CRS 0x10000 +#define PCI_NO_ROOT_CRS 0x10000 #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 #define PCI_HAS_IO_ECS 0x40000 #define PCI_NOASSIGN_ROMS 0x80000 diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index c0ecf250fe51..16c3fda85bba 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -38,15 +38,26 @@ count_resource(struct acpi_resource *acpi_res, void *data) struct acpi_resource_address64 addr; acpi_status status; - if (info->res_num >= PCI_BUS_NUM_RESOURCES) - return AE_OK; - status = resource_to_addr(acpi_res, &addr); if (ACPI_SUCCESS(status)) info->res_num++; return AE_OK; } +static int +bus_has_transparent_bridge(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + u16 class = dev->class >> 8; + + if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) + return true; + } + return false; +} + static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data) { @@ -56,9 +67,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data) acpi_status status; unsigned long flags; struct resource *root; - - if (info->res_num >= PCI_BUS_NUM_RESOURCES) - return AE_OK; + int max_root_bus_resources = PCI_BUS_NUM_RESOURCES; status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) @@ -82,6 +91,18 @@ setup_resource(struct acpi_resource *acpi_res, void *data) res->end = res->start + addr.address_length - 1; res->child = NULL; + if (bus_has_transparent_bridge(info->bus)) + max_root_bus_resources -= 3; + if (info->res_num >= max_root_bus_resources) { + printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx " + "from %s for %s due to _CRS returning more than " + "%d resource descriptors\n", (unsigned long) res->start, + (unsigned long) res->end, root->name, info->name, + max_root_bus_resources); + info->res_num++; + return AE_OK; + } + if (insert_resource(root, res)) { printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx " "from %s for %s\n", (unsigned long) res->start, @@ -217,7 +238,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do #endif } - if (bus && (pci_probe & PCI_USE__CRS)) + if (bus && !(pci_probe & PCI_NO_ROOT_CRS)) get_current_resources(device, busnum, domain, bus); return bus; } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index f893d6a6e803..2255f880678b 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -101,7 +101,7 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) struct pci_root_info *info; /* don't go for it if _CRS is used */ - if (pci_probe & PCI_USE__CRS) + if (!(pci_probe & PCI_NO_ROOT_CRS)) return; /* if only one root bus, don't need to anything */ diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 2202b6257b82..4740119e4bb7 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -515,8 +515,8 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "assign-busses")) { pci_probe |= PCI_ASSIGN_ALL_BUSSES; return NULL; - } else if (!strcmp(str, "use_crs")) { - pci_probe |= PCI_USE__CRS; + } else if (!strcmp(str, "nocrs")) { + pci_probe |= PCI_NO_ROOT_CRS; return NULL; } else if (!strcmp(str, "earlydump")) { pci_early_dump_regs = 1; diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 431f8b439553..7ec7d88c5999 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -266,6 +266,7 @@ config ACPI_DEBUG_FUNC_TRACE config ACPI_PCI_SLOT tristate "PCI slot detection driver" + depends on SYSFS default n help This driver creates entries in /sys/bus/pci/slots/ for all PCI diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index b77ae6794275..1ebd6b4c743b 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -2,10 +2,11 @@ # Makefile for the PCI bus specific drivers. # -obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \ +obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \ pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \ irq.o obj-$(CONFIG_PROC_FS) += proc.o +obj-$(CONFIG_SYSFS) += slot.o # Build PCI Express stuff if needed obj-$(CONFIG_PCIEPORTBUS) += pcie/ diff --git a/drivers/pci/access.c b/drivers/pci/access.c index 0f3706512686..db23200c4874 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -66,6 +66,25 @@ EXPORT_SYMBOL(pci_bus_write_config_byte); EXPORT_SYMBOL(pci_bus_write_config_word); EXPORT_SYMBOL(pci_bus_write_config_dword); +/** + * pci_bus_set_ops - Set raw operations of pci bus + * @bus: pci bus struct + * @ops: new raw operations + * + * Return previous raw operations + */ +struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops) +{ + struct pci_ops *old_ops; + unsigned long flags; + + spin_lock_irqsave(&pci_lock, flags); + old_ops = bus->ops; + bus->ops = ops; + spin_unlock_irqrestore(&pci_lock, flags); + return old_ops; +} +EXPORT_SYMBOL(pci_bus_set_ops); /** * pci_read_vpd - Read one entry from Vital Product Data diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 97a8194063b5..cef28a79103f 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -41,9 +41,14 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, void *alignf_data) { int i, ret = -ENOMEM; + resource_size_t max = -1; type_mask |= IORESOURCE_IO | IORESOURCE_MEM; + /* don't allocate too high if the pref mem doesn't support 64bit*/ + if (!(res->flags & IORESOURCE_MEM_64)) + max = PCIBIOS_MAX_MEM_32; + for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { struct resource *r = bus->resource[i]; if (!r) @@ -62,7 +67,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, /* Ok, try it out.. */ ret = allocate_resource(r, res, size, r->start ? : min, - -1, align, + max, align, alignf, alignf_data); if (ret == 0) break; @@ -201,13 +206,18 @@ void pci_enable_bridges(struct pci_bus *bus) * Walk the given bus, including any bridged devices * on buses under this bus. Call the provided callback * on each device found. + * + * We check the return of @cb each time. If it returns anything + * other than 0, we break out. + * */ -void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *), +void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata) { struct pci_dev *dev; struct pci_bus *bus; struct list_head *next; + int retval; bus = top; down_read(&pci_bus_sem); @@ -231,8 +241,10 @@ void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *), /* Run device routines with the device locked */ down(&dev->dev.sem); - cb(dev, userdata); + retval = cb(dev, userdata); up(&dev->dev.sem); + if (retval) + break; } up_read(&pci_bus_sem); } diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 9aa4fe100a0d..66f29bc00be4 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -4,7 +4,7 @@ menuconfig HOTPLUG_PCI tristate "Support for PCI Hotplug" - depends on PCI && HOTPLUG + depends on PCI && HOTPLUG && SYSFS ---help--- Say Y here if you have a motherboard with a PCI Hotplug controller. This allows you to add and remove PCI cards while the machine is @@ -41,7 +41,7 @@ config HOTPLUG_PCI_FAKE config HOTPLUG_PCI_COMPAQ tristate "Compaq PCI Hotplug driver" - depends on X86 && PCI_BIOS && PCI_LEGACY + depends on X86 && PCI_BIOS help Say Y here if you have a motherboard with a Compaq PCI Hotplug controller. diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 43c10bd261b4..4dd7114964ac 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -77,7 +77,6 @@ static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); static struct hotplug_slot_ops acpi_hotplug_slot_ops = { - .owner = THIS_MODULE, .enable_slot = enable_slot, .disable_slot = disable_slot, .set_attention_status = set_attention_status, diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index de94f4feef8c..a5b9f6ae507b 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -72,7 +72,6 @@ static int get_adapter_status(struct hotplug_slot *slot, u8 * value); static int get_latch_status(struct hotplug_slot *slot, u8 * value); static struct hotplug_slot_ops cpci_hotplug_slot_ops = { - .owner = THIS_MODULE, .enable_slot = enable_slot, .disable_slot = disable_slot, .set_attention_status = set_attention_status, diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index afaf8f69f73e..53836001d511 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -150,25 +150,25 @@ struct ctrl_reg { /* offset */ /* offsets to the controller registers based on the above structure layout */ enum ctrl_offsets { - SLOT_RST = offsetof(struct ctrl_reg, slot_RST), + SLOT_RST = offsetof(struct ctrl_reg, slot_RST), SLOT_ENABLE = offsetof(struct ctrl_reg, slot_enable), MISC = offsetof(struct ctrl_reg, misc), LED_CONTROL = offsetof(struct ctrl_reg, led_control), INT_INPUT_CLEAR = offsetof(struct ctrl_reg, int_input_clear), - INT_MASK = offsetof(struct ctrl_reg, int_mask), - CTRL_RESERVED0 = offsetof(struct ctrl_reg, reserved0), + INT_MASK = offsetof(struct ctrl_reg, int_mask), + CTRL_RESERVED0 = offsetof(struct ctrl_reg, reserved0), CTRL_RESERVED1 = offsetof(struct ctrl_reg, reserved1), CTRL_RESERVED2 = offsetof(struct ctrl_reg, reserved1), - GEN_OUTPUT_AB = offsetof(struct ctrl_reg, gen_output_AB), - NON_INT_INPUT = offsetof(struct ctrl_reg, non_int_input), + GEN_OUTPUT_AB = offsetof(struct ctrl_reg, gen_output_AB), + NON_INT_INPUT = offsetof(struct ctrl_reg, non_int_input), CTRL_RESERVED3 = offsetof(struct ctrl_reg, reserved3), CTRL_RESERVED4 = offsetof(struct ctrl_reg, reserved4), CTRL_RESERVED5 = offsetof(struct ctrl_reg, reserved5), CTRL_RESERVED6 = offsetof(struct ctrl_reg, reserved6), CTRL_RESERVED7 = offsetof(struct ctrl_reg, reserved7), CTRL_RESERVED8 = offsetof(struct ctrl_reg, reserved8), - SLOT_MASK = offsetof(struct ctrl_reg, slot_mask), - CTRL_RESERVED9 = offsetof(struct ctrl_reg, reserved9), + SLOT_MASK = offsetof(struct ctrl_reg, slot_mask), + CTRL_RESERVED9 = offsetof(struct ctrl_reg, reserved9), CTRL_RESERVED10 = offsetof(struct ctrl_reg, reserved10), CTRL_RESERVED11 = offsetof(struct ctrl_reg, reserved11), SLOT_SERR = offsetof(struct ctrl_reg, slot_SERR), @@ -190,7 +190,9 @@ struct hrt { u32 reserved2; } __attribute__ ((packed)); -/* offsets to the hotplug resource table registers based on the above structure layout */ +/* offsets to the hotplug resource table registers based on the above + * structure layout + */ enum hrt_offsets { SIG0 = offsetof(struct hrt, sig0), SIG1 = offsetof(struct hrt, sig1), @@ -217,18 +219,20 @@ struct slot_rt { u16 pre_mem_length; } __attribute__ ((packed)); -/* offsets to the hotplug slot resource table registers based on the above structure layout */ +/* offsets to the hotplug slot resource table registers based on the above + * structure layout + */ enum slot_rt_offsets { DEV_FUNC = offsetof(struct slot_rt, dev_func), - PRIMARY_BUS = offsetof(struct slot_rt, primary_bus), - SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus), - MAX_BUS = offsetof(struct slot_rt, max_bus), - IO_BASE = offsetof(struct slot_rt, io_base), - IO_LENGTH = offsetof(struct slot_rt, io_length), - MEM_BASE = offsetof(struct slot_rt, mem_base), - MEM_LENGTH = offsetof(struct slot_rt, mem_length), - PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base), - PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length), + PRIMARY_BUS = offsetof(struct slot_rt, primary_bus), + SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus), + MAX_BUS = offsetof(struct slot_rt, max_bus), + IO_BASE = offsetof(struct slot_rt, io_base), + IO_LENGTH = offsetof(struct slot_rt, io_length), + MEM_BASE = offsetof(struct slot_rt, mem_base), + MEM_LENGTH = offsetof(struct slot_rt, mem_length), + PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base), + PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length), }; struct pci_func { @@ -286,8 +290,8 @@ struct event_info { struct controller { struct controller *next; u32 ctrl_int_comp; - struct mutex crit_sect; /* critical section mutex */ - void __iomem *hpc_reg; /* cookie for our pci controller location */ + struct mutex crit_sect; /* critical section mutex */ + void __iomem *hpc_reg; /* cookie for our pci controller location */ struct pci_resource *mem_head; struct pci_resource *p_mem_head; struct pci_resource *io_head; @@ -299,7 +303,7 @@ struct controller { u8 next_event; u8 interrupt; u8 cfgspc_irq; - u8 bus; /* bus number for the pci hotplug controller */ + u8 bus; /* bus number for the pci hotplug controller */ u8 rev; u8 slot_device_offset; u8 first_slot; @@ -401,46 +405,57 @@ struct resource_lists { /* debugfs functions for the hotplug controller info */ -extern void cpqhp_initialize_debugfs (void); -extern void cpqhp_shutdown_debugfs (void); -extern void cpqhp_create_debugfs_files (struct controller *ctrl); -extern void cpqhp_remove_debugfs_files (struct controller *ctrl); +extern void cpqhp_initialize_debugfs(void); +extern void cpqhp_shutdown_debugfs(void); +extern void cpqhp_create_debugfs_files(struct controller *ctrl); +extern void cpqhp_remove_debugfs_files(struct controller *ctrl); /* controller functions */ -extern void cpqhp_pushbutton_thread (unsigned long event_pointer); -extern irqreturn_t cpqhp_ctrl_intr (int IRQ, void *data); -extern int cpqhp_find_available_resources (struct controller *ctrl, void __iomem *rom_start); -extern int cpqhp_event_start_thread (void); -extern void cpqhp_event_stop_thread (void); -extern struct pci_func *cpqhp_slot_create (unsigned char busnumber); -extern struct pci_func *cpqhp_slot_find (unsigned char bus, unsigned char device, unsigned char index); -extern int cpqhp_process_SI (struct controller *ctrl, struct pci_func *func); -extern int cpqhp_process_SS (struct controller *ctrl, struct pci_func *func); -extern int cpqhp_hardware_test (struct controller *ctrl, int test_num); +extern void cpqhp_pushbutton_thread(unsigned long event_pointer); +extern irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data); +extern int cpqhp_find_available_resources(struct controller *ctrl, + void __iomem *rom_start); +extern int cpqhp_event_start_thread(void); +extern void cpqhp_event_stop_thread(void); +extern struct pci_func *cpqhp_slot_create(unsigned char busnumber); +extern struct pci_func *cpqhp_slot_find(unsigned char bus, unsigned char device, + unsigned char index); +extern int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func); +extern int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func); +extern int cpqhp_hardware_test(struct controller *ctrl, int test_num); /* resource functions */ extern int cpqhp_resource_sort_and_combine (struct pci_resource **head); /* pci functions */ -extern int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num); -extern int cpqhp_get_bus_dev (struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot); -extern int cpqhp_save_config (struct controller *ctrl, int busnumber, int is_hot_plug); -extern int cpqhp_save_base_addr_length (struct controller *ctrl, struct pci_func * func); -extern int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func); -extern int cpqhp_configure_board (struct controller *ctrl, struct pci_func * func); -extern int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot); -extern int cpqhp_valid_replace (struct controller *ctrl, struct pci_func * func); -extern void cpqhp_destroy_board_resources (struct pci_func * func); -extern int cpqhp_return_board_resources (struct pci_func * func, struct resource_lists * resources); -extern void cpqhp_destroy_resource_list (struct resource_lists * resources); -extern int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func); -extern int cpqhp_unconfigure_device (struct pci_func* func); +extern int cpqhp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num); +extern int cpqhp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num, + u8 slot); +extern int cpqhp_save_config(struct controller *ctrl, int busnumber, + int is_hot_plug); +extern int cpqhp_save_base_addr_length(struct controller *ctrl, + struct pci_func *func); +extern int cpqhp_save_used_resources(struct controller *ctrl, + struct pci_func *func); +extern int cpqhp_configure_board(struct controller *ctrl, + struct pci_func *func); +extern int cpqhp_save_slot_config(struct controller *ctrl, + struct pci_func *new_slot); +extern int cpqhp_valid_replace(struct controller *ctrl, struct pci_func *func); +extern void cpqhp_destroy_board_resources(struct pci_func *func); +extern int cpqhp_return_board_resources (struct pci_func *func, + struct resource_lists *resources); +extern void cpqhp_destroy_resource_list(struct resource_lists *resources); +extern int cpqhp_configure_device(struct controller *ctrl, + struct pci_func *func); +extern int cpqhp_unconfigure_device(struct pci_func *func); /* Global variables */ extern int cpqhp_debug; extern int cpqhp_legacy_mode; extern struct controller *cpqhp_ctrl_list; extern struct pci_func *cpqhp_slot_list[256]; +extern struct irq_routing_table *cpqhp_routing_table; /* these can be gotten rid of, but for debugging they are purty */ extern u8 cpqhp_nic_irq; @@ -449,7 +464,7 @@ extern u8 cpqhp_disk_irq; /* inline functions */ -static inline char *slot_name(struct slot *slot) +static inline const char *slot_name(struct slot *slot) { return hotplug_slot_name(slot->hotplug_slot); } @@ -458,9 +473,9 @@ static inline char *slot_name(struct slot *slot) * return_resource * * Puts node back in the resource list pointed to by head - * */ -static inline void return_resource(struct pci_resource **head, struct pci_resource *node) +static inline void return_resource(struct pci_resource **head, + struct pci_resource *node) { if (!node || !head) return; @@ -471,7 +486,7 @@ static inline void return_resource(struct pci_resource **head, struct pci_resour static inline void set_SOGO(struct controller *ctrl) { u16 misc; - + misc = readw(ctrl->hpc_reg + MISC); misc = (misc | 0x0001) & 0xFFFB; writew(misc, ctrl->hpc_reg + MISC); @@ -481,7 +496,7 @@ static inline void set_SOGO(struct controller *ctrl) static inline void amber_LED_on(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control |= (0x01010000L << slot); writel(led_control, ctrl->hpc_reg + LED_CONTROL); @@ -491,7 +506,7 @@ static inline void amber_LED_on(struct controller *ctrl, u8 slot) static inline void amber_LED_off(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control &= ~(0x01010000L << slot); writel(led_control, ctrl->hpc_reg + LED_CONTROL); @@ -504,7 +519,7 @@ static inline int read_amber_LED(struct controller *ctrl, u8 slot) led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control &= (0x01010000L << slot); - + return led_control ? 1 : 0; } @@ -512,7 +527,7 @@ static inline int read_amber_LED(struct controller *ctrl, u8 slot) static inline void green_LED_on(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control |= 0x0101L << slot; writel(led_control, ctrl->hpc_reg + LED_CONTROL); @@ -521,7 +536,7 @@ static inline void green_LED_on(struct controller *ctrl, u8 slot) static inline void green_LED_off(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control &= ~(0x0101L << slot); writel(led_control, ctrl->hpc_reg + LED_CONTROL); @@ -531,7 +546,7 @@ static inline void green_LED_off(struct controller *ctrl, u8 slot) static inline void green_LED_blink(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control &= ~(0x0101L << slot); led_control |= (0x0001L << slot); @@ -575,22 +590,21 @@ static inline u8 read_slot_enable(struct controller *ctrl) } -/* +/** * get_controller_speed - find the current frequency/mode of controller. * * @ctrl: controller to get frequency/mode for. * * Returns controller speed. - * */ static inline u8 get_controller_speed(struct controller *ctrl) { u8 curr_freq; - u16 misc; - + u16 misc; + if (ctrl->pcix_support) { curr_freq = readb(ctrl->hpc_reg + NEXT_CURR_FREQ); - if ((curr_freq & 0xB0) == 0xB0) + if ((curr_freq & 0xB0) == 0xB0) return PCI_SPEED_133MHz_PCIX; if ((curr_freq & 0xA0) == 0xA0) return PCI_SPEED_100MHz_PCIX; @@ -602,19 +616,18 @@ static inline u8 get_controller_speed(struct controller *ctrl) return PCI_SPEED_33MHz; } - misc = readw(ctrl->hpc_reg + MISC); - return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; + misc = readw(ctrl->hpc_reg + MISC); + return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; } - -/* + +/** * get_adapter_speed - find the max supported frequency/mode of adapter. * * @ctrl: hotplug controller. * @hp_slot: hotplug slot where adapter is installed. * * Returns adapter speed. - * */ static inline u8 get_adapter_speed(struct controller *ctrl, u8 hp_slot) { @@ -672,7 +685,8 @@ static inline int get_slot_enabled(struct controller *ctrl, struct slot *slot) } -static inline int cpq_get_latch_status(struct controller *ctrl, struct slot *slot) +static inline int cpq_get_latch_status(struct controller *ctrl, + struct slot *slot) { u32 status; u8 hp_slot; @@ -687,7 +701,8 @@ static inline int cpq_get_latch_status(struct controller *ctrl, struct slot *slo } -static inline int get_presence_status(struct controller *ctrl, struct slot *slot) +static inline int get_presence_status(struct controller *ctrl, + struct slot *slot) { int presence_save = 0; u8 hp_slot; @@ -696,7 +711,8 @@ static inline int get_presence_status(struct controller *ctrl, struct slot *slot hp_slot = slot->device - ctrl->slot_device_offset; tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); - presence_save = (int) ((((~tempdword) >> 23) | ((~tempdword) >> 15)) >> hp_slot) & 0x02; + presence_save = (int) ((((~tempdword) >> 23) | ((~tempdword) >> 15)) + >> hp_slot) & 0x02; return presence_save; } @@ -718,5 +734,12 @@ static inline int wait_for_ctrl_irq(struct controller *ctrl) return retval; } -#endif +#include <asm/pci_x86.h> +static inline int cpqhp_routing_table_length(void) +{ + BUG_ON(cpqhp_routing_table == NULL); + return ((cpqhp_routing_table->size - sizeof(struct irq_routing_table)) / + sizeof(struct irq_info)); +} +#endif diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index c2e1bcbb28a7..075b4f4b6e0d 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -25,8 +25,7 @@ * Send feedback to <greg@kroah.com> * * Jan 12, 2003 - Added 66/100/133MHz PCI-X support, - * Torben Mathiasen <torben.mathiasen@hp.com> - * + * Torben Mathiasen <torben.mathiasen@hp.com> */ #include <linux/module.h> @@ -45,7 +44,6 @@ #include "cpqphp.h" #include "cpqphp_nvram.h" -#include <asm/pci_x86.h> /* Global variables */ @@ -53,6 +51,7 @@ int cpqhp_debug; int cpqhp_legacy_mode; struct controller *cpqhp_ctrl_list; /* = NULL */ struct pci_func *cpqhp_slot_list[256]; +struct irq_routing_table *cpqhp_routing_table; /* local variables */ static void __iomem *smbios_table; @@ -78,33 +77,6 @@ MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); #define CPQHPC_MODULE_MINOR 208 -static int one_time_init (void); -static int set_attention_status (struct hotplug_slot *slot, u8 value); -static int process_SI (struct hotplug_slot *slot); -static int process_SS (struct hotplug_slot *slot); -static int hardware_test (struct hotplug_slot *slot, u32 value); -static int get_power_status (struct hotplug_slot *slot, u8 *value); -static int get_attention_status (struct hotplug_slot *slot, u8 *value); -static int get_latch_status (struct hotplug_slot *slot, u8 *value); -static int get_adapter_status (struct hotplug_slot *slot, u8 *value); -static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); -static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); - -static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { - .owner = THIS_MODULE, - .set_attention_status = set_attention_status, - .enable_slot = process_SI, - .disable_slot = process_SS, - .hardware_test = hardware_test, - .get_power_status = get_power_status, - .get_attention_status = get_attention_status, - .get_latch_status = get_latch_status, - .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, -}; - - static inline int is_slot64bit(struct slot *slot) { return (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06) ? 1 : 0; @@ -144,7 +116,7 @@ static void __iomem * detect_SMBIOS_pointer(void __iomem *begin, void __iomem *e break; } } - + if (!status) fp = NULL; @@ -171,7 +143,7 @@ static int init_SERR(struct controller * ctrl) tempdword = ctrl->first_slot; number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F; - // Loop through slots + /* Loop through slots */ while (number_of_slots) { physical_slot = tempdword; writeb(0, ctrl->hpc_reg + SLOT_SERR); @@ -182,41 +154,42 @@ static int init_SERR(struct controller * ctrl) return 0; } - -/* nice debugging output */ -static int pci_print_IRQ_route (void) +static int init_cpqhp_routing_table(void) { - struct irq_routing_table *routing_table; int len; - int loop; - - u8 tbus, tdevice, tslot; - routing_table = pcibios_get_irq_routing_table(); - if (routing_table == NULL) { - err("No BIOS Routing Table??? Not good\n"); + cpqhp_routing_table = pcibios_get_irq_routing_table(); + if (cpqhp_routing_table == NULL) return -ENOMEM; - } - len = (routing_table->size - sizeof(struct irq_routing_table)) / - sizeof(struct irq_info); - // Make sure I got at least one entry + len = cpqhp_routing_table_length(); if (len == 0) { - kfree(routing_table); + kfree(cpqhp_routing_table); + cpqhp_routing_table = NULL; return -1; } - dbg("bus dev func slot\n"); + return 0; +} + +/* nice debugging output */ +static void pci_print_IRQ_route(void) +{ + int len; + int loop; + u8 tbus, tdevice, tslot; + + len = cpqhp_routing_table_length(); + dbg("bus dev func slot\n"); for (loop = 0; loop < len; ++loop) { - tbus = routing_table->slots[loop].bus; - tdevice = routing_table->slots[loop].devfn; - tslot = routing_table->slots[loop].slot; + tbus = cpqhp_routing_table->slots[loop].bus; + tdevice = cpqhp_routing_table->slots[loop].devfn; + tslot = cpqhp_routing_table->slots[loop].slot; dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot); } - kfree(routing_table); - return 0; + return; } @@ -242,9 +215,9 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start, void __iomem *p_max; if (!smbios_table || !curr) - return(NULL); + return NULL; - // set p_max to the end of the table + /* set p_max to the end of the table */ p_max = smbios_start + readw(smbios_table + ST_LENGTH); p_temp = curr; @@ -253,20 +226,19 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start, while ((p_temp < p_max) && !bail) { /* Look for the double NULL terminator * The first condition is the previous byte - * and the second is the curr */ - if (!previous_byte && !(readb(p_temp))) { + * and the second is the curr + */ + if (!previous_byte && !(readb(p_temp))) bail = 1; - } previous_byte = readb(p_temp); p_temp++; } - if (p_temp < p_max) { + if (p_temp < p_max) return p_temp; - } else { + else return NULL; - } } @@ -292,21 +264,18 @@ static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start, if (!smbios_table) return NULL; - if (!previous) { + if (!previous) previous = smbios_start; - } else { + else previous = get_subsequent_smbios_entry(smbios_start, smbios_table, previous); - } - while (previous) { - if (readb(previous + SMBIOS_GENERIC_TYPE) != type) { + while (previous) + if (readb(previous + SMBIOS_GENERIC_TYPE) != type) previous = get_subsequent_smbios_entry(smbios_start, smbios_table, previous); - } else { + else break; - } - } return previous; } @@ -322,144 +291,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) kfree(slot); } -#define SLOT_NAME_SIZE 10 - -static int ctrl_slot_setup(struct controller *ctrl, - void __iomem *smbios_start, - void __iomem *smbios_table) -{ - struct slot *slot; - struct hotplug_slot *hotplug_slot; - struct hotplug_slot_info *hotplug_slot_info; - u8 number_of_slots; - u8 slot_device; - u8 slot_number; - u8 ctrl_slot; - u32 tempdword; - char name[SLOT_NAME_SIZE]; - void __iomem *slot_entry= NULL; - int result = -ENOMEM; - - dbg("%s\n", __func__); - - tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); - - number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F; - slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4; - slot_number = ctrl->first_slot; - - while (number_of_slots) { - slot = kzalloc(sizeof(*slot), GFP_KERNEL); - if (!slot) - goto error; - - slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)), - GFP_KERNEL); - if (!slot->hotplug_slot) - goto error_slot; - hotplug_slot = slot->hotplug_slot; - - hotplug_slot->info = - kzalloc(sizeof(*(hotplug_slot->info)), - GFP_KERNEL); - if (!hotplug_slot->info) - goto error_hpslot; - hotplug_slot_info = hotplug_slot->info; - - slot->ctrl = ctrl; - slot->bus = ctrl->bus; - slot->device = slot_device; - slot->number = slot_number; - dbg("slot->number = %u\n", slot->number); - - slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, - slot_entry); - - while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) != - slot->number)) { - slot_entry = get_SMBIOS_entry(smbios_start, - smbios_table, 9, slot_entry); - } - - slot->p_sm_slot = slot_entry; - - init_timer(&slot->task_event); - slot->task_event.expires = jiffies + 5 * HZ; - slot->task_event.function = cpqhp_pushbutton_thread; - - //FIXME: these capabilities aren't used but if they are - // they need to be correctly implemented - slot->capabilities |= PCISLOT_REPLACE_SUPPORTED; - slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED; - - if (is_slot64bit(slot)) - slot->capabilities |= PCISLOT_64_BIT_SUPPORTED; - if (is_slot66mhz(slot)) - slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED; - if (ctrl->speed == PCI_SPEED_66MHz) - slot->capabilities |= PCISLOT_66_MHZ_OPERATION; - - ctrl_slot = - slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4); - - // Check presence - slot->capabilities |= - ((((~tempdword) >> 23) | - ((~tempdword) >> 15)) >> ctrl_slot) & 0x02; - // Check the switch state - slot->capabilities |= - ((~tempdword & 0xFF) >> ctrl_slot) & 0x01; - // Check the slot enable - slot->capabilities |= - ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04; - - /* register this slot with the hotplug pci core */ - hotplug_slot->release = &release_slot; - hotplug_slot->private = slot; - snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); - hotplug_slot->ops = &cpqphp_hotplug_slot_ops; - - hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot); - hotplug_slot_info->attention_status = - cpq_get_attention_status(ctrl, slot); - hotplug_slot_info->latch_status = - cpq_get_latch_status(ctrl, slot); - hotplug_slot_info->adapter_status = - get_presence_status(ctrl, slot); - - dbg("registering bus %d, dev %d, number %d, " - "ctrl->slot_device_offset %d, slot %d\n", - slot->bus, slot->device, - slot->number, ctrl->slot_device_offset, - slot_number); - result = pci_hp_register(hotplug_slot, - ctrl->pci_dev->bus, - slot->device, - name); - if (result) { - err("pci_hp_register failed with error %d\n", result); - goto error_info; - } - - slot->next = ctrl->slot; - ctrl->slot = slot; - - number_of_slots--; - slot_device++; - slot_number++; - } - - return 0; -error_info: - kfree(hotplug_slot_info); -error_hpslot: - kfree(hotplug_slot); -error_slot: - kfree(slot); -error: - return result; -} - static int ctrl_slot_cleanup (struct controller * ctrl) { struct slot *old_slot, *next_slot; @@ -476,36 +307,32 @@ static int ctrl_slot_cleanup (struct controller * ctrl) cpqhp_remove_debugfs_files(ctrl); - //Free IRQ associated with hot plug device + /* Free IRQ associated with hot plug device */ free_irq(ctrl->interrupt, ctrl); - //Unmap the memory + /* Unmap the memory */ iounmap(ctrl->hpc_reg); - //Finally reclaim PCI mem + /* Finally reclaim PCI mem */ release_mem_region(pci_resource_start(ctrl->pci_dev, 0), pci_resource_len(ctrl->pci_dev, 0)); - return(0); + return 0; } -//============================================================================ -// function: get_slot_mapping -// -// Description: Attempts to determine a logical slot mapping for a PCI -// device. Won't work for more than one PCI-PCI bridge -// in a slot. -// -// Input: u8 bus_num - bus number of PCI device -// u8 dev_num - device number of PCI device -// u8 *slot - Pointer to u8 where slot number will -// be returned -// -// Output: SUCCESS or FAILURE -//============================================================================= +/** + * get_slot_mapping - determine logical slot mapping for PCI device + * + * Won't work for more than one PCI-PCI bridge in a slot. + * + * @bus_num - bus number of PCI device + * @dev_num - device number of PCI device + * @slot - Pointer to u8 where slot number will be returned + * + * Output: SUCCESS or FAILURE + */ static int get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) { - struct irq_routing_table *PCIIRQRoutingInfoLength; u32 work; long len; long loop; @@ -516,36 +343,25 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) bridgeSlot = 0xFF; - PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table(); - if (!PCIIRQRoutingInfoLength) - return -1; - - len = (PCIIRQRoutingInfoLength->size - - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); - // Make sure I got at least one entry - if (len == 0) { - kfree(PCIIRQRoutingInfoLength); - return -1; - } - + len = cpqhp_routing_table_length(); for (loop = 0; loop < len; ++loop) { - tbus = PCIIRQRoutingInfoLength->slots[loop].bus; - tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn >> 3; - tslot = PCIIRQRoutingInfoLength->slots[loop].slot; + tbus = cpqhp_routing_table->slots[loop].bus; + tdevice = cpqhp_routing_table->slots[loop].devfn >> 3; + tslot = cpqhp_routing_table->slots[loop].slot; if ((tbus == bus_num) && (tdevice == dev_num)) { *slot = tslot; - kfree(PCIIRQRoutingInfoLength); return 0; } else { /* Did not get a match on the target PCI device. Check - * if the current IRQ table entry is a PCI-to-PCI bridge - * device. If so, and it's secondary bus matches the - * bus number for the target device, I need to save the - * bridge's slot number. If I can not find an entry for - * the target device, I will have to assume it's on the - * other side of the bridge, and assign it the bridge's - * slot. */ + * if the current IRQ table entry is a PCI-to-PCI + * bridge device. If so, and it's secondary bus + * matches the bus number for the target device, I need + * to save the bridge's slot number. If I can not find + * an entry for the target device, I will have to + * assume it's on the other side of the bridge, and + * assign it the bridge's slot. + */ bus->number = tbus; pci_bus_read_config_dword(bus, PCI_DEVFN(tdevice, 0), PCI_CLASS_REVISION, &work); @@ -555,25 +371,23 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) PCI_DEVFN(tdevice, 0), PCI_PRIMARY_BUS, &work); // See if bridge's secondary bus matches target bus. - if (((work >> 8) & 0x000000FF) == (long) bus_num) { + if (((work >> 8) & 0x000000FF) == (long) bus_num) bridgeSlot = tslot; - } } } } - // If we got here, we didn't find an entry in the IRQ mapping table - // for the target PCI device. If we did determine that the target - // device is on the other side of a PCI-to-PCI bridge, return the - // slot number for the bridge. + /* If we got here, we didn't find an entry in the IRQ mapping table for + * the target PCI device. If we did determine that the target device + * is on the other side of a PCI-to-PCI bridge, return the slot number + * for the bridge. + */ if (bridgeSlot != 0xFF) { *slot = bridgeSlot; - kfree(PCIIRQRoutingInfoLength); return 0; } - kfree(PCIIRQRoutingInfoLength); - // Couldn't find an entry in the routing table for this PCI device + /* Couldn't find an entry in the routing table for this PCI device */ return -1; } @@ -591,32 +405,32 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func, u8 hp_slot; if (func == NULL) - return(1); + return 1; hp_slot = func->device - ctrl->slot_device_offset; - // Wait for exclusive access to hardware + /* Wait for exclusive access to hardware */ mutex_lock(&ctrl->crit_sect); - if (status == 1) { + if (status == 1) amber_LED_on (ctrl, hp_slot); - } else if (status == 0) { + else if (status == 0) amber_LED_off (ctrl, hp_slot); - } else { - // Done with exclusive hardware access + else { + /* Done with exclusive hardware access */ mutex_unlock(&ctrl->crit_sect); - return(1); + return 1; } set_SOGO(ctrl); - // Wait for SOBS to be unset + /* Wait for SOBS to be unset */ wait_for_ctrl_irq (ctrl); - // Done with exclusive hardware access + /* Done with exclusive hardware access */ mutex_unlock(&ctrl->crit_sect); - return(0); + return 0; } @@ -719,7 +533,7 @@ static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value) dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); - return cpqhp_hardware_test(ctrl, value); + return cpqhp_hardware_test(ctrl, value); } @@ -738,7 +552,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) { struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = cpq_get_attention_status(ctrl, slot); @@ -793,6 +607,230 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp return 0; } +static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { + .set_attention_status = set_attention_status, + .enable_slot = process_SI, + .disable_slot = process_SS, + .hardware_test = hardware_test, + .get_power_status = get_power_status, + .get_attention_status = get_attention_status, + .get_latch_status = get_latch_status, + .get_adapter_status = get_adapter_status, + .get_max_bus_speed = get_max_bus_speed, + .get_cur_bus_speed = get_cur_bus_speed, +}; + +#define SLOT_NAME_SIZE 10 + +static int ctrl_slot_setup(struct controller *ctrl, + void __iomem *smbios_start, + void __iomem *smbios_table) +{ + struct slot *slot; + struct hotplug_slot *hotplug_slot; + struct hotplug_slot_info *hotplug_slot_info; + u8 number_of_slots; + u8 slot_device; + u8 slot_number; + u8 ctrl_slot; + u32 tempdword; + char name[SLOT_NAME_SIZE]; + void __iomem *slot_entry= NULL; + int result = -ENOMEM; + + dbg("%s\n", __func__); + + tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); + + number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F; + slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4; + slot_number = ctrl->first_slot; + + while (number_of_slots) { + slot = kzalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) + goto error; + + slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)), + GFP_KERNEL); + if (!slot->hotplug_slot) + goto error_slot; + hotplug_slot = slot->hotplug_slot; + + hotplug_slot->info = kzalloc(sizeof(*(hotplug_slot->info)), + GFP_KERNEL); + if (!hotplug_slot->info) + goto error_hpslot; + hotplug_slot_info = hotplug_slot->info; + + slot->ctrl = ctrl; + slot->bus = ctrl->bus; + slot->device = slot_device; + slot->number = slot_number; + dbg("slot->number = %u\n", slot->number); + + slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, + slot_entry); + + while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) != + slot->number)) { + slot_entry = get_SMBIOS_entry(smbios_start, + smbios_table, 9, slot_entry); + } + + slot->p_sm_slot = slot_entry; + + init_timer(&slot->task_event); + slot->task_event.expires = jiffies + 5 * HZ; + slot->task_event.function = cpqhp_pushbutton_thread; + + /*FIXME: these capabilities aren't used but if they are + * they need to be correctly implemented + */ + slot->capabilities |= PCISLOT_REPLACE_SUPPORTED; + slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED; + + if (is_slot64bit(slot)) + slot->capabilities |= PCISLOT_64_BIT_SUPPORTED; + if (is_slot66mhz(slot)) + slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED; + if (ctrl->speed == PCI_SPEED_66MHz) + slot->capabilities |= PCISLOT_66_MHZ_OPERATION; + + ctrl_slot = + slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4); + + /* Check presence */ + slot->capabilities |= + ((((~tempdword) >> 23) | + ((~tempdword) >> 15)) >> ctrl_slot) & 0x02; + /* Check the switch state */ + slot->capabilities |= + ((~tempdword & 0xFF) >> ctrl_slot) & 0x01; + /* Check the slot enable */ + slot->capabilities |= + ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04; + + /* register this slot with the hotplug pci core */ + hotplug_slot->release = &release_slot; + hotplug_slot->private = slot; + snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); + hotplug_slot->ops = &cpqphp_hotplug_slot_ops; + + hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot); + hotplug_slot_info->attention_status = + cpq_get_attention_status(ctrl, slot); + hotplug_slot_info->latch_status = + cpq_get_latch_status(ctrl, slot); + hotplug_slot_info->adapter_status = + get_presence_status(ctrl, slot); + + dbg("registering bus %d, dev %d, number %d, " + "ctrl->slot_device_offset %d, slot %d\n", + slot->bus, slot->device, + slot->number, ctrl->slot_device_offset, + slot_number); + result = pci_hp_register(hotplug_slot, + ctrl->pci_dev->bus, + slot->device, + name); + if (result) { + err("pci_hp_register failed with error %d\n", result); + goto error_info; + } + + slot->next = ctrl->slot; + ctrl->slot = slot; + + number_of_slots--; + slot_device++; + slot_number++; + } + + return 0; +error_info: + kfree(hotplug_slot_info); +error_hpslot: + kfree(hotplug_slot); +error_slot: + kfree(slot); +error: + return result; +} + +static int one_time_init(void) +{ + int loop; + int retval = 0; + + if (initialized) + return 0; + + power_mode = 0; + + retval = init_cpqhp_routing_table(); + if (retval) + goto error; + + if (cpqhp_debug) + pci_print_IRQ_route(); + + dbg("Initialize + Start the notification mechanism \n"); + + retval = cpqhp_event_start_thread(); + if (retval) + goto error; + + dbg("Initialize slot lists\n"); + for (loop = 0; loop < 256; loop++) + cpqhp_slot_list[loop] = NULL; + + /* FIXME: We also need to hook the NMI handler eventually. + * this also needs to be worked with Christoph + * register_NMI_handler(); + */ + /* Map rom address */ + cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN); + if (!cpqhp_rom_start) { + err ("Could not ioremap memory region for ROM\n"); + retval = -EIO; + goto error; + } + + /* Now, map the int15 entry point if we are on compaq specific + * hardware + */ + compaq_nvram_init(cpqhp_rom_start); + + /* Map smbios table entry point structure */ + smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start, + cpqhp_rom_start + ROM_PHY_LEN); + if (!smbios_table) { + err ("Could not find the SMBIOS pointer in memory\n"); + retval = -EIO; + goto error_rom_start; + } + + smbios_start = ioremap(readl(smbios_table + ST_ADDRESS), + readw(smbios_table + ST_LENGTH)); + if (!smbios_start) { + err ("Could not ioremap memory region taken from SMBIOS values\n"); + retval = -EIO; + goto error_smbios_start; + } + + initialized = 1; + + return retval; + +error_smbios_start: + iounmap(smbios_start); +error_rom_start: + iounmap(cpqhp_rom_start); +error: + return retval; +} + static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { u8 num_of_slots = 0; @@ -815,7 +853,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return err; } - // Need to read VID early b/c it's used to differentiate CPQ and INTC discovery + /* Need to read VID early b/c it's used to differentiate CPQ and INTC + * discovery + */ rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id); if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) { err(msg_HPC_non_compaq_or_intel); @@ -832,217 +872,209 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* Check for the proper subsytem ID's - * Intel uses a different SSID programming model than Compaq. + * Intel uses a different SSID programming model than Compaq. * For Intel, each SSID bit identifies a PHP capability. * Also Intel HPC's may have RID=0. */ - if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) { - // TODO: This code can be made to support non-Compaq or Intel subsystem IDs - rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid); - if (rc) { - err("%s : pci_read_config_word failed\n", __func__); - goto err_disable_device; - } - dbg("Subsystem Vendor ID: %x\n", subsystem_vid); - if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) { - err(msg_HPC_non_compaq_or_intel); - rc = -ENODEV; - goto err_disable_device; - } + if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) { + err(msg_HPC_not_supported); + return -ENODEV; + } - ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL); - if (!ctrl) { - err("%s : out of memory\n", __func__); - rc = -ENOMEM; - goto err_disable_device; - } + /* TODO: This code can be made to support non-Compaq or Intel + * subsystem IDs + */ + rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid); + if (rc) { + err("%s : pci_read_config_word failed\n", __func__); + goto err_disable_device; + } + dbg("Subsystem Vendor ID: %x\n", subsystem_vid); + if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) { + err(msg_HPC_non_compaq_or_intel); + rc = -ENODEV; + goto err_disable_device; + } - rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid); - if (rc) { - err("%s : pci_read_config_word failed\n", __func__); - goto err_free_ctrl; - } + ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL); + if (!ctrl) { + err("%s : out of memory\n", __func__); + rc = -ENOMEM; + goto err_disable_device; + } - info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid); - - /* Set Vendor ID, so it can be accessed later from other functions */ - ctrl->vendor_id = vendor_id; - - switch (subsystem_vid) { - case PCI_VENDOR_ID_COMPAQ: - if (pdev->revision >= 0x13) { /* CIOBX */ - ctrl->push_flag = 1; - ctrl->slot_switch_type = 1; - ctrl->push_button = 1; - ctrl->pci_config_space = 1; - ctrl->defeature_PHP = 1; - ctrl->pcix_support = 1; - ctrl->pcix_speed_capability = 1; - pci_read_config_byte(pdev, 0x41, &bus_cap); - if (bus_cap & 0x80) { - dbg("bus max supports 133MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_133MHz_PCIX; - break; - } - if (bus_cap & 0x40) { - dbg("bus max supports 100MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; - break; - } - if (bus_cap & 20) { - dbg("bus max supports 66MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_66MHz_PCIX; - break; - } - if (bus_cap & 10) { - dbg("bus max supports 66MHz PCI\n"); - ctrl->speed_capability = PCI_SPEED_66MHz; - break; - } - - break; - } - - switch (subsystem_deviceid) { - case PCI_SUB_HPC_ID: - /* Original 6500/7000 implementation */ - ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; - ctrl->push_button = 0; - ctrl->pci_config_space = 1; - ctrl->defeature_PHP = 1; - ctrl->pcix_support = 0; - ctrl->pcix_speed_capability = 0; - break; - case PCI_SUB_HPC_ID2: - /* First Pushbutton implementation */ - ctrl->push_flag = 1; - ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; - ctrl->push_button = 1; - ctrl->pci_config_space = 1; - ctrl->defeature_PHP = 1; - ctrl->pcix_support = 0; - ctrl->pcix_speed_capability = 0; - break; - case PCI_SUB_HPC_ID_INTC: - /* Third party (6500/7000) */ - ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; - ctrl->push_button = 0; - ctrl->pci_config_space = 1; - ctrl->defeature_PHP = 1; - ctrl->pcix_support = 0; - ctrl->pcix_speed_capability = 0; - break; - case PCI_SUB_HPC_ID3: - /* First 66 Mhz implementation */ - ctrl->push_flag = 1; - ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_66MHz; - ctrl->push_button = 1; - ctrl->pci_config_space = 1; - ctrl->defeature_PHP = 1; - ctrl->pcix_support = 0; - ctrl->pcix_speed_capability = 0; - break; - case PCI_SUB_HPC_ID4: - /* First PCI-X implementation, 100MHz */ - ctrl->push_flag = 1; - ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; - ctrl->push_button = 1; - ctrl->pci_config_space = 1; - ctrl->defeature_PHP = 1; - ctrl->pcix_support = 1; - ctrl->pcix_speed_capability = 0; - break; - default: - err(msg_HPC_not_supported); - rc = -ENODEV; - goto err_free_ctrl; - } - break; + rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid); + if (rc) { + err("%s : pci_read_config_word failed\n", __func__); + goto err_free_ctrl; + } - case PCI_VENDOR_ID_INTEL: - /* Check for speed capability (0=33, 1=66) */ - if (subsystem_deviceid & 0x0001) { - ctrl->speed_capability = PCI_SPEED_66MHz; - } else { - ctrl->speed_capability = PCI_SPEED_33MHz; - } - - /* Check for push button */ - if (subsystem_deviceid & 0x0002) { - /* no push button */ - ctrl->push_button = 0; - } else { - /* push button supported */ - ctrl->push_button = 1; - } - - /* Check for slot switch type (0=mechanical, 1=not mechanical) */ - if (subsystem_deviceid & 0x0004) { - /* no switch */ - ctrl->slot_switch_type = 0; - } else { - /* switch */ - ctrl->slot_switch_type = 1; - } - - /* PHP Status (0=De-feature PHP, 1=Normal operation) */ - if (subsystem_deviceid & 0x0008) { - ctrl->defeature_PHP = 1; // PHP supported - } else { - ctrl->defeature_PHP = 0; // PHP not supported - } - - /* Alternate Base Address Register Interface (0=not supported, 1=supported) */ - if (subsystem_deviceid & 0x0010) { - ctrl->alternate_base_address = 1; // supported - } else { - ctrl->alternate_base_address = 0; // not supported - } - - /* PCI Config Space Index (0=not supported, 1=supported) */ - if (subsystem_deviceid & 0x0020) { - ctrl->pci_config_space = 1; // supported - } else { - ctrl->pci_config_space = 0; // not supported - } - - /* PCI-X support */ - if (subsystem_deviceid & 0x0080) { - /* PCI-X capable */ - ctrl->pcix_support = 1; - /* Frequency of operation in PCI-X mode */ - if (subsystem_deviceid & 0x0040) { - /* 133MHz PCI-X if bit 7 is 1 */ - ctrl->pcix_speed_capability = 1; - } else { - /* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */ - /* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */ - ctrl->pcix_speed_capability = 0; - } - } else { - /* Conventional PCI */ - ctrl->pcix_support = 0; - ctrl->pcix_speed_capability = 0; - } + info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid); + + /* Set Vendor ID, so it can be accessed later from other + * functions + */ + ctrl->vendor_id = vendor_id; + + switch (subsystem_vid) { + case PCI_VENDOR_ID_COMPAQ: + if (pdev->revision >= 0x13) { /* CIOBX */ + ctrl->push_flag = 1; + ctrl->slot_switch_type = 1; + ctrl->push_button = 1; + ctrl->pci_config_space = 1; + ctrl->defeature_PHP = 1; + ctrl->pcix_support = 1; + ctrl->pcix_speed_capability = 1; + pci_read_config_byte(pdev, 0x41, &bus_cap); + if (bus_cap & 0x80) { + dbg("bus max supports 133MHz PCI-X\n"); + ctrl->speed_capability = PCI_SPEED_133MHz_PCIX; break; + } + if (bus_cap & 0x40) { + dbg("bus max supports 100MHz PCI-X\n"); + ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; + break; + } + if (bus_cap & 20) { + dbg("bus max supports 66MHz PCI-X\n"); + ctrl->speed_capability = PCI_SPEED_66MHz_PCIX; + break; + } + if (bus_cap & 10) { + dbg("bus max supports 66MHz PCI\n"); + ctrl->speed_capability = PCI_SPEED_66MHz; + break; + } + + break; + } - default: - err(msg_HPC_not_supported); - rc = -ENODEV; - goto err_free_ctrl; + switch (subsystem_deviceid) { + case PCI_SUB_HPC_ID: + /* Original 6500/7000 implementation */ + ctrl->slot_switch_type = 1; + ctrl->speed_capability = PCI_SPEED_33MHz; + ctrl->push_button = 0; + ctrl->pci_config_space = 1; + ctrl->defeature_PHP = 1; + ctrl->pcix_support = 0; + ctrl->pcix_speed_capability = 0; + break; + case PCI_SUB_HPC_ID2: + /* First Pushbutton implementation */ + ctrl->push_flag = 1; + ctrl->slot_switch_type = 1; + ctrl->speed_capability = PCI_SPEED_33MHz; + ctrl->push_button = 1; + ctrl->pci_config_space = 1; + ctrl->defeature_PHP = 1; + ctrl->pcix_support = 0; + ctrl->pcix_speed_capability = 0; + break; + case PCI_SUB_HPC_ID_INTC: + /* Third party (6500/7000) */ + ctrl->slot_switch_type = 1; + ctrl->speed_capability = PCI_SPEED_33MHz; + ctrl->push_button = 0; + ctrl->pci_config_space = 1; + ctrl->defeature_PHP = 1; + ctrl->pcix_support = 0; + ctrl->pcix_speed_capability = 0; + break; + case PCI_SUB_HPC_ID3: + /* First 66 Mhz implementation */ + ctrl->push_flag = 1; + ctrl->slot_switch_type = 1; + ctrl->speed_capability = PCI_SPEED_66MHz; + ctrl->push_button = 1; + ctrl->pci_config_space = 1; + ctrl->defeature_PHP = 1; + ctrl->pcix_support = 0; + ctrl->pcix_speed_capability = 0; + break; + case PCI_SUB_HPC_ID4: + /* First PCI-X implementation, 100MHz */ + ctrl->push_flag = 1; + ctrl->slot_switch_type = 1; + ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; + ctrl->push_button = 1; + ctrl->pci_config_space = 1; + ctrl->defeature_PHP = 1; + ctrl->pcix_support = 1; + ctrl->pcix_speed_capability = 0; + break; + default: + err(msg_HPC_not_supported); + rc = -ENODEV; + goto err_free_ctrl; } + break; + + case PCI_VENDOR_ID_INTEL: + /* Check for speed capability (0=33, 1=66) */ + if (subsystem_deviceid & 0x0001) + ctrl->speed_capability = PCI_SPEED_66MHz; + else + ctrl->speed_capability = PCI_SPEED_33MHz; + + /* Check for push button */ + if (subsystem_deviceid & 0x0002) + ctrl->push_button = 0; + else + ctrl->push_button = 1; + + /* Check for slot switch type (0=mechanical, 1=not mechanical) */ + if (subsystem_deviceid & 0x0004) + ctrl->slot_switch_type = 0; + else + ctrl->slot_switch_type = 1; + + /* PHP Status (0=De-feature PHP, 1=Normal operation) */ + if (subsystem_deviceid & 0x0008) + ctrl->defeature_PHP = 1; /* PHP supported */ + else + ctrl->defeature_PHP = 0; /* PHP not supported */ + + /* Alternate Base Address Register Interface + * (0=not supported, 1=supported) + */ + if (subsystem_deviceid & 0x0010) + ctrl->alternate_base_address = 1; + else + ctrl->alternate_base_address = 0; + + /* PCI Config Space Index (0=not supported, 1=supported) */ + if (subsystem_deviceid & 0x0020) + ctrl->pci_config_space = 1; + else + ctrl->pci_config_space = 0; + + /* PCI-X support */ + if (subsystem_deviceid & 0x0080) { + ctrl->pcix_support = 1; + if (subsystem_deviceid & 0x0040) + /* 133MHz PCI-X if bit 7 is 1 */ + ctrl->pcix_speed_capability = 1; + else + /* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */ + /* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */ + ctrl->pcix_speed_capability = 0; + } else { + /* Conventional PCI */ + ctrl->pcix_support = 0; + ctrl->pcix_speed_capability = 0; + } + break; - } else { + default: err(msg_HPC_not_supported); - return -ENODEV; + rc = -ENODEV; + goto err_free_ctrl; } - // Tell the user that we found one. + /* Tell the user that we found one. */ info("Initializing the PCI hot plug controller residing on PCI bus %d\n", pdev->bus->number); @@ -1087,7 +1119,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) { goto err_free_bus; } - + dbg("pdev = %p\n", pdev); dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0)); dbg("pci resource len %llx\n", (unsigned long long)pci_resource_len(pdev, 0)); @@ -1109,7 +1141,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_free_mem_region; } - // Check for 66Mhz operation + /* Check for 66Mhz operation */ ctrl->speed = get_controller_speed(ctrl); @@ -1120,7 +1152,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * ********************************************************/ - // find the physical slot number of the first hot plug slot + /* find the physical slot number of the first hot plug slot */ /* Get slot won't work for devices behind bridges, but * in this case it will always be called for the "base" @@ -1137,7 +1169,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_iounmap; } - // Store PCI Config Space for all devices on this bus + /* Store PCI Config Space for all devices on this bus */ rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK)); if (rc) { err("%s: unable to save PCI configuration data, error %d\n", @@ -1148,7 +1180,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* * Get IO, memory, and IRQ resources for new devices */ - // The next line is required for cpqhp_find_available_resources + /* The next line is required for cpqhp_find_available_resources */ ctrl->interrupt = pdev->irq; if (ctrl->interrupt < 0x10) { cpqhp_legacy_mode = 1; @@ -1182,7 +1214,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) __func__, rc); goto err_iounmap; } - + /* Mask all general input interrupts */ writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK); @@ -1196,12 +1228,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_iounmap; } - /* Enable Shift Out interrupt and clear it, also enable SERR on power fault */ + /* Enable Shift Out interrupt and clear it, also enable SERR on power + * fault + */ temp_word = readw(ctrl->hpc_reg + MISC); temp_word |= 0x4006; writew(temp_word, ctrl->hpc_reg + MISC); - // Changed 05/05/97 to clear all interrupts at start + /* Changed 05/05/97 to clear all interrupts at start */ writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR); ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); @@ -1216,13 +1250,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) cpqhp_ctrl_list = ctrl; } - // turn off empty slots here unless command line option "ON" set - // Wait for exclusive access to hardware + /* turn off empty slots here unless command line option "ON" set + * Wait for exclusive access to hardware + */ mutex_lock(&ctrl->crit_sect); num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F; - // find first device number for the ctrl + /* find first device number for the ctrl */ device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4; while (num_of_slots) { @@ -1234,23 +1269,21 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) hp_slot = func->device - ctrl->slot_device_offset; dbg("hp_slot: %d\n", hp_slot); - // We have to save the presence info for these slots + /* We have to save the presence info for these slots */ temp_word = ctrl->ctrl_int_comp >> 16; func->presence_save = (temp_word >> hp_slot) & 0x01; func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; - if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) { + if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) func->switch_save = 0; - } else { + else func->switch_save = 0x10; - } - if (!power_mode) { + if (!power_mode) if (!func->is_a_board) { green_LED_off(ctrl, hp_slot); slot_disable(ctrl, hp_slot); } - } device++; num_of_slots--; @@ -1258,7 +1291,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!power_mode) { set_SOGO(ctrl); - // Wait for SOBS to be unset + /* Wait for SOBS to be unset */ wait_for_ctrl_irq(ctrl); } @@ -1269,7 +1302,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_free_irq; } - // Done with exclusive hardware access + /* Done with exclusive hardware access */ mutex_unlock(&ctrl->crit_sect); cpqhp_create_debugfs_files(ctrl); @@ -1291,77 +1324,6 @@ err_disable_device: return rc; } - -static int one_time_init(void) -{ - int loop; - int retval = 0; - - if (initialized) - return 0; - - power_mode = 0; - - retval = pci_print_IRQ_route(); - if (retval) - goto error; - - dbg("Initialize + Start the notification mechanism \n"); - - retval = cpqhp_event_start_thread(); - if (retval) - goto error; - - dbg("Initialize slot lists\n"); - for (loop = 0; loop < 256; loop++) { - cpqhp_slot_list[loop] = NULL; - } - - // FIXME: We also need to hook the NMI handler eventually. - // this also needs to be worked with Christoph - // register_NMI_handler(); - - // Map rom address - cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN); - if (!cpqhp_rom_start) { - err ("Could not ioremap memory region for ROM\n"); - retval = -EIO; - goto error; - } - - /* Now, map the int15 entry point if we are on compaq specific hardware */ - compaq_nvram_init(cpqhp_rom_start); - - /* Map smbios table entry point structure */ - smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start, - cpqhp_rom_start + ROM_PHY_LEN); - if (!smbios_table) { - err ("Could not find the SMBIOS pointer in memory\n"); - retval = -EIO; - goto error_rom_start; - } - - smbios_start = ioremap(readl(smbios_table + ST_ADDRESS), - readw(smbios_table + ST_LENGTH)); - if (!smbios_start) { - err ("Could not ioremap memory region taken from SMBIOS values\n"); - retval = -EIO; - goto error_smbios_start; - } - - initialized = 1; - - return retval; - -error_smbios_start: - iounmap(smbios_start); -error_rom_start: - iounmap(cpqhp_rom_start); -error: - return retval; -} - - static void __exit unload_cpqphpd(void) { struct pci_func *next; @@ -1381,10 +1343,10 @@ static void __exit unload_cpqphpd(void) if (ctrl->hpc_reg) { u16 misc; rc = read_slot_enable (ctrl); - + writeb(0, ctrl->hpc_reg + SLOT_SERR); writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK); - + misc = readw(ctrl->hpc_reg + MISC); misc &= 0xFFFD; writew(misc, ctrl->hpc_reg + MISC); @@ -1464,38 +1426,34 @@ static void __exit unload_cpqphpd(void) } } - // Stop the notification mechanism + /* Stop the notification mechanism */ if (initialized) cpqhp_event_stop_thread(); - //unmap the rom address + /* unmap the rom address */ if (cpqhp_rom_start) iounmap(cpqhp_rom_start); if (smbios_start) iounmap(smbios_start); } - - static struct pci_device_id hpcd_pci_tbl[] = { { /* handle any PCI Hotplug controller */ .class = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00), .class_mask = ~0, - + /* no matter who makes it */ .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - + }, { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl); - - static struct pci_driver cpqhpc_driver = { .name = "compaq_pci_hotplug", .id_table = hpcd_pci_tbl, @@ -1503,8 +1461,6 @@ static struct pci_driver cpqhpc_driver = { /* remove: cpqhpc_remove_one, */ }; - - static int __init cpqhpc_init(void) { int result; @@ -1518,7 +1474,6 @@ static int __init cpqhpc_init(void) return result; } - static void __exit cpqhpc_cleanup(void) { dbg("unload_cpqphpd()\n"); @@ -1529,8 +1484,5 @@ static void __exit cpqhpc_cleanup(void) cpqhp_shutdown_debugfs(); } - module_init(cpqhpc_init); module_exit(cpqhpc_cleanup); - - diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index cc227a8c4b11..2fa47af992a8 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -81,14 +81,15 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl) for (hp_slot = 0; hp_slot < 6; hp_slot++) { if (change & (0x1L << hp_slot)) { - /********************************** + /* * this one changed. - **********************************/ + */ func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0); /* this is the structure that tells the worker thread - *what to do */ + * what to do + */ taskInfo = &(ctrl->event_queue[ctrl->next_event]); ctrl->next_event = (ctrl->next_event + 1) % 10; taskInfo->hp_slot = hp_slot; @@ -100,17 +101,17 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl) func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) { - /********************************** + /* * Switch opened - **********************************/ + */ func->switch_save = 0; taskInfo->event_type = INT_SWITCH_OPEN; } else { - /********************************** + /* * Switch closed - **********************************/ + */ func->switch_save = 0x10; @@ -131,9 +132,8 @@ static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device) { struct slot *slot = ctrl->slot; - while (slot && (slot->device != device)) { + while (slot && (slot->device != device)) slot = slot->next; - } return slot; } @@ -152,17 +152,17 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl) if (!change) return 0; - /********************************** + /* * Presence Change - **********************************/ + */ dbg("cpqsbd: Presence/Notify input change.\n"); dbg(" Changed bits are 0x%4.4x\n", change ); for (hp_slot = 0; hp_slot < 6; hp_slot++) { if (change & (0x0101 << hp_slot)) { - /********************************** + /* * this one changed. - **********************************/ + */ func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0); @@ -177,22 +177,23 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl) return 0; /* If the switch closed, must be a button - * If not in button mode, nevermind */ + * If not in button mode, nevermind + */ if (func->switch_save && (ctrl->push_button == 1)) { temp_word = ctrl->ctrl_int_comp >> 16; temp_byte = (temp_word >> hp_slot) & 0x01; temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02; if (temp_byte != func->presence_save) { - /************************************** + /* * button Pressed (doesn't do anything) - **************************************/ + */ dbg("hp_slot %d button pressed\n", hp_slot); taskInfo->event_type = INT_BUTTON_PRESS; } else { - /********************************** + /* * button Released - TAKE ACTION!!!! - **********************************/ + */ dbg("hp_slot %d button released\n", hp_slot); taskInfo->event_type = INT_BUTTON_RELEASE; @@ -210,7 +211,8 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl) } } else { /* Switch is open, assume a presence change - * Save the presence state */ + * Save the presence state + */ temp_word = ctrl->ctrl_int_comp >> 16; func->presence_save = (temp_word >> hp_slot) & 0x01; func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; @@ -241,17 +243,17 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl) if (!change) return 0; - /********************************** + /* * power fault - **********************************/ + */ info("power fault interrupt\n"); for (hp_slot = 0; hp_slot < 6; hp_slot++) { if (change & (0x01 << hp_slot)) { - /********************************** + /* * this one changed. - **********************************/ + */ func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0); @@ -262,16 +264,16 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl) rc++; if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) { - /********************************** + /* * power fault Cleared - **********************************/ + */ func->status = 0x00; taskInfo->event_type = INT_POWER_FAULT_CLEAR; } else { - /********************************** + /* * power fault - **********************************/ + */ taskInfo->event_type = INT_POWER_FAULT; if (ctrl->rev < 4) { @@ -432,13 +434,15 @@ static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **h /* If we got here, there the bridge requires some of the resource, but - * we may be able to split some off of the front */ + * we may be able to split some off of the front + */ node = *head; if (node->length & (alignment -1)) { /* this one isn't an aligned length, so we'll make a new entry - * and split it up. */ + * and split it up. + */ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); if (!split_node) @@ -544,10 +548,10 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size if (!(*head)) return NULL; - if ( cpqhp_resource_sort_and_combine(head) ) + if (cpqhp_resource_sort_and_combine(head)) return NULL; - if ( sort_by_size(head) ) + if (sort_by_size(head)) return NULL; for (node = *head; node; node = node->next) { @@ -556,7 +560,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size if (node->base & (size - 1)) { /* this one isn't base aligned properly - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ temp_dword = (node->base | (size-1)) + 1; /* Short circuit if adjusted size is too small */ @@ -581,7 +586,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size /* Don't need to check if too small since we already did */ if (node->length > size) { /* this one is longer than we need - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); if (!split_node) @@ -601,7 +607,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size continue; /* If we got here, then it is the right size - * Now take it out of the list and break */ + * Now take it out of the list and break + */ if (*head == node) { *head = node->next; } else { @@ -642,14 +649,16 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz return NULL; for (max = *head; max; max = max->next) { - /* If not big enough we could probably just bail, - * instead we'll continue to the next. */ + /* If not big enough we could probably just bail, + * instead we'll continue to the next. + */ if (max->length < size) continue; if (max->base & (size - 1)) { /* this one isn't base aligned properly - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ temp_dword = (max->base | (size-1)) + 1; /* Short circuit if adjusted size is too small */ @@ -672,7 +681,8 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz if ((max->base + max->length) & (size - 1)) { /* this one isn't end aligned properly at the top - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); if (!split_node) @@ -744,7 +754,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size) if (node->base & (size - 1)) { dbg("%s: not aligned\n", __func__); /* this one isn't base aligned properly - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ temp_dword = (node->base | (size-1)) + 1; /* Short circuit if adjusted size is too small */ @@ -769,7 +780,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size) if (node->length > size) { dbg("%s: too big\n", __func__); /* this one is longer than we need - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); if (!split_node) @@ -886,19 +898,19 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data) u32 Diff; u32 temp_dword; - + misc = readw(ctrl->hpc_reg + MISC); - /*************************************** + /* * Check to see if it was our interrupt - ***************************************/ + */ if (!(misc & 0x000C)) { return IRQ_NONE; } if (misc & 0x0004) { - /********************************** + /* * Serial Output interrupt Pending - **********************************/ + */ /* Clear the interrupt */ misc |= 0x0004; @@ -961,11 +973,8 @@ struct pci_func *cpqhp_slot_create(u8 busnumber) struct pci_func *next; new_slot = kzalloc(sizeof(*new_slot), GFP_KERNEL); - if (new_slot == NULL) { - /* I'm not dead yet! - * You will be. */ + if (new_slot == NULL) return new_slot; - } new_slot->next = NULL; new_slot->configured = 1; @@ -996,10 +1005,8 @@ static int slot_remove(struct pci_func * old_slot) return 1; next = cpqhp_slot_list[old_slot->bus]; - - if (next == NULL) { + if (next == NULL) return 1; - } if (next == old_slot) { cpqhp_slot_list[old_slot->bus] = old_slot->next; @@ -1008,9 +1015,8 @@ static int slot_remove(struct pci_func * old_slot) return 0; } - while ((next->next != old_slot) && (next->next != NULL)) { + while ((next->next != old_slot) && (next->next != NULL)) next = next->next; - } if (next->next == old_slot) { next->next = old_slot->next; @@ -1040,9 +1046,8 @@ static int bridge_slot_remove(struct pci_func *bridge) for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { next = cpqhp_slot_list[tempBus]; - while (!slot_remove(next)) { + while (!slot_remove(next)) next = cpqhp_slot_list[tempBus]; - } } next = cpqhp_slot_list[bridge->bus]; @@ -1130,39 +1135,43 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER); u16 reg16; u32 leds = readl(ctrl->hpc_reg + LED_CONTROL); - + if (ctrl->speed == adapter_speed) return 0; - + /* We don't allow freq/mode changes if we find another adapter running - * in another slot on this controller */ + * in another slot on this controller + */ for(slot = ctrl->slot; slot; slot = slot->next) { - if (slot->device == (hp_slot + ctrl->slot_device_offset)) + if (slot->device == (hp_slot + ctrl->slot_device_offset)) continue; if (!slot->hotplug_slot || !slot->hotplug_slot->info) continue; - if (slot->hotplug_slot->info->adapter_status == 0) + if (slot->hotplug_slot->info->adapter_status == 0) continue; /* If another adapter is running on the same segment but at a * lower speed/mode, we allow the new adapter to function at - * this rate if supported */ - if (ctrl->speed < adapter_speed) + * this rate if supported + */ + if (ctrl->speed < adapter_speed) return 0; return 1; } - + /* If the controller doesn't support freq/mode changes and the - * controller is running at a higher mode, we bail */ + * controller is running at a higher mode, we bail + */ if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability)) return 1; - + /* But we allow the adapter to run at a lower rate if possible */ if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability)) return 0; /* We try to set the max speed supported by both the adapter and - * controller */ + * controller + */ if (ctrl->speed_capability < adapter_speed) { if (ctrl->speed == ctrl->speed_capability) return 0; @@ -1171,22 +1180,22 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ writel(0x0L, ctrl->hpc_reg + LED_CONTROL); writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE); - - set_SOGO(ctrl); + + set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); - + if (adapter_speed != PCI_SPEED_133MHz_PCIX) reg = 0xF5; else - reg = 0xF4; + reg = 0xF4; pci_write_config_byte(ctrl->pci_dev, 0x41, reg); - + reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ); reg16 &= ~0x000F; switch(adapter_speed) { - case(PCI_SPEED_133MHz_PCIX): + case(PCI_SPEED_133MHz_PCIX): reg = 0x75; - reg16 |= 0xB; + reg16 |= 0xB; break; case(PCI_SPEED_100MHz_PCIX): reg = 0x74; @@ -1203,48 +1212,48 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ default: /* 33MHz PCI 2.2 */ reg = 0x71; break; - + } reg16 |= 0xB << 12; writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ); - - mdelay(5); - + + mdelay(5); + /* Reenable interrupts */ writel(0, ctrl->hpc_reg + INT_MASK); - pci_write_config_byte(ctrl->pci_dev, 0x41, reg); - + pci_write_config_byte(ctrl->pci_dev, 0x41, reg); + /* Restart state machine */ reg = ~0xF; pci_read_config_byte(ctrl->pci_dev, 0x43, ®); pci_write_config_byte(ctrl->pci_dev, 0x43, reg); - + /* Only if mode change...*/ if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) set_SOGO(ctrl); - + wait_for_ctrl_irq(ctrl); mdelay(1100); - + /* Restore LED/Slot state */ writel(leds, ctrl->hpc_reg + LED_CONTROL); writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE); - + set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); ctrl->speed = adapter_speed; slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - info("Successfully changed frequency/mode for adapter in slot %d\n", + info("Successfully changed frequency/mode for adapter in slot %d\n", slot->number); return 0; } -/* the following routines constitute the bulk of the - hotplug controller logic +/* the following routines constitute the bulk of the + * hotplug controller logic */ @@ -1268,17 +1277,17 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) hp_slot = func->device - ctrl->slot_device_offset; - if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) { - /********************************** - * The switch is open. - **********************************/ + /* + * The switch is open. + */ + if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) rc = INTERLOCK_OPEN; - } else if (is_slot_enabled (ctrl, hp_slot)) { - /********************************** - * The board is already on - **********************************/ + /* + * The board is already on + */ + else if (is_slot_enabled (ctrl, hp_slot)) rc = CARD_FUNCTIONING; - } else { + else { mutex_lock(&ctrl->crit_sect); /* turn on board without attaching to the bus */ @@ -1299,7 +1308,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) /* Wait for SOBS to be unset */ wait_for_ctrl_irq (ctrl); - + adapter_speed = get_adapter_speed(ctrl, hp_slot); if (ctrl->speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) @@ -1352,7 +1361,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) * Get slot won't work for devices behind * bridges, but in this case it will always be * called for the "base" bus/dev/func of an - * adapter. */ + * adapter. + */ mutex_lock(&ctrl->crit_sect); @@ -1377,7 +1387,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) * Get slot won't work for devices behind bridges, but * in this case it will always be called for the "base" - * bus/dev/func of an adapter. */ + * bus/dev/func of an adapter. + */ mutex_lock(&ctrl->crit_sect); @@ -1434,7 +1445,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) wait_for_ctrl_irq (ctrl); /* Change bits in slot power register to force another shift out - * NOTE: this is to work around the timer bug */ + * NOTE: this is to work around the timer bug + */ temp_byte = readb(ctrl->hpc_reg + SLOT_POWER); writeb(0x00, ctrl->hpc_reg + SLOT_POWER); writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER); @@ -1443,12 +1455,12 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) /* Wait for SOBS to be unset */ wait_for_ctrl_irq (ctrl); - + adapter_speed = get_adapter_speed(ctrl, hp_slot); if (ctrl->speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) rc = WRONG_BUS_FREQUENCY; - + /* turn off board without attaching to the bus */ disable_slot_power (ctrl, hp_slot); @@ -1461,7 +1473,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) if (rc) return rc; - + p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); /* turn on board and blink green LED */ @@ -1521,7 +1533,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) } /* All F's is an empty slot or an invalid board */ - if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */ + if (temp_register != 0xFFFFFFFF) { res_lists.io_head = ctrl->io_head; res_lists.mem_head = ctrl->mem_head; res_lists.p_mem_head = ctrl->p_mem_head; @@ -1570,9 +1582,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) index = 0; do { new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++); - if (new_slot && !new_slot->pci_dev) { + if (new_slot && !new_slot->pci_dev) cpqhp_configure_device(ctrl, new_slot); - } } while (new_slot); mutex_lock(&ctrl->crit_sect); @@ -1859,12 +1870,12 @@ static void interrupt_event_handler(struct controller *ctrl) info(msg_button_on, p_slot->number); } mutex_lock(&ctrl->crit_sect); - + dbg("blink green LED and turn off amber\n"); - + amber_LED_off (ctrl, hp_slot); green_LED_blink (ctrl, hp_slot); - + set_SOGO(ctrl); /* Wait for SOBS to be unset */ @@ -1958,7 +1969,7 @@ void cpqhp_pushbutton_thread(unsigned long slot) if (cpqhp_process_SI(ctrl, func) != 0) { amber_LED_on(ctrl, hp_slot); green_LED_off(ctrl, hp_slot); - + set_SOGO(ctrl); /* Wait for SOBS to be unset */ @@ -2079,7 +2090,7 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func) struct pci_bus *pci_bus = ctrl->pci_bus; int physical_slot=0; - device = func->device; + device = func->device; func = cpqhp_slot_find(ctrl->bus, device, index++); p_slot = cpqhp_find_slot(ctrl, device); if (p_slot) { @@ -2113,9 +2124,8 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func) /* If the VGA Enable bit is set, remove isn't * supported */ - if (BCR & PCI_BRIDGE_CTL_VGA) { + if (BCR & PCI_BRIDGE_CTL_VGA) rc = REMOVE_NOT_SUPPORTED; - } } } @@ -2183,67 +2193,67 @@ int cpqhp_hardware_test(struct controller *ctrl, int test_num) num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f; switch (test_num) { - case 1: - /* Do stuff here! */ - - /* Do that funky LED thing */ - /* so we can restore them later */ - save_LED = readl(ctrl->hpc_reg + LED_CONTROL); - work_LED = 0x01010101; - switch_leds(ctrl, num_of_slots, &work_LED, 0); - switch_leds(ctrl, num_of_slots, &work_LED, 1); - switch_leds(ctrl, num_of_slots, &work_LED, 0); - switch_leds(ctrl, num_of_slots, &work_LED, 1); - - work_LED = 0x01010000; - writel(work_LED, ctrl->hpc_reg + LED_CONTROL); - switch_leds(ctrl, num_of_slots, &work_LED, 0); - switch_leds(ctrl, num_of_slots, &work_LED, 1); - work_LED = 0x00000101; - writel(work_LED, ctrl->hpc_reg + LED_CONTROL); - switch_leds(ctrl, num_of_slots, &work_LED, 0); - switch_leds(ctrl, num_of_slots, &work_LED, 1); + case 1: + /* Do stuff here! */ + + /* Do that funky LED thing */ + /* so we can restore them later */ + save_LED = readl(ctrl->hpc_reg + LED_CONTROL); + work_LED = 0x01010101; + switch_leds(ctrl, num_of_slots, &work_LED, 0); + switch_leds(ctrl, num_of_slots, &work_LED, 1); + switch_leds(ctrl, num_of_slots, &work_LED, 0); + switch_leds(ctrl, num_of_slots, &work_LED, 1); + + work_LED = 0x01010000; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + switch_leds(ctrl, num_of_slots, &work_LED, 0); + switch_leds(ctrl, num_of_slots, &work_LED, 1); + work_LED = 0x00000101; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + switch_leds(ctrl, num_of_slots, &work_LED, 0); + switch_leds(ctrl, num_of_slots, &work_LED, 1); + + work_LED = 0x01010000; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + for (loop = 0; loop < num_of_slots; loop++) { + set_SOGO(ctrl); - work_LED = 0x01010000; - writel(work_LED, ctrl->hpc_reg + LED_CONTROL); - for (loop = 0; loop < num_of_slots; loop++) { - set_SOGO(ctrl); + /* Wait for SOGO interrupt */ + wait_for_ctrl_irq (ctrl); - /* Wait for SOGO interrupt */ - wait_for_ctrl_irq (ctrl); + /* Get ready for next iteration */ + long_delay((3*HZ)/10); + work_LED = work_LED >> 16; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); - /* Get ready for next iteration */ - long_delay((3*HZ)/10); - work_LED = work_LED >> 16; - writel(work_LED, ctrl->hpc_reg + LED_CONTROL); - - set_SOGO(ctrl); + set_SOGO(ctrl); - /* Wait for SOGO interrupt */ - wait_for_ctrl_irq (ctrl); + /* Wait for SOGO interrupt */ + wait_for_ctrl_irq (ctrl); - /* Get ready for next iteration */ - long_delay((3*HZ)/10); - work_LED = work_LED << 16; - writel(work_LED, ctrl->hpc_reg + LED_CONTROL); - work_LED = work_LED << 1; - writel(work_LED, ctrl->hpc_reg + LED_CONTROL); - } + /* Get ready for next iteration */ + long_delay((3*HZ)/10); + work_LED = work_LED << 16; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + work_LED = work_LED << 1; + writel(work_LED, ctrl->hpc_reg + LED_CONTROL); + } - /* put it back the way it was */ - writel(save_LED, ctrl->hpc_reg + LED_CONTROL); + /* put it back the way it was */ + writel(save_LED, ctrl->hpc_reg + LED_CONTROL); - set_SOGO(ctrl); + set_SOGO(ctrl); - /* Wait for SOBS to be unset */ - wait_for_ctrl_irq (ctrl); - break; - case 2: - /* Do other stuff here! */ - break; - case 3: - /* and more... */ - break; + /* Wait for SOBS to be unset */ + wait_for_ctrl_irq (ctrl); + break; + case 2: + /* Do other stuff here! */ + break; + case 3: + /* and more... */ + break; } return 0; } @@ -2312,9 +2322,9 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func while ((function < max_functions) && (!stop_it)) { pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID); - if (ID == 0xFFFFFFFF) { /* There's nothing there. */ + if (ID == 0xFFFFFFFF) { function++; - } else { /* There's something there */ + } else { /* Setup slot structure. */ new_slot = cpqhp_slot_create(func->bus); @@ -2339,8 +2349,8 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func /* - Configuration logic that involves the hotplug data structures and - their bookkeeping + * Configuration logic that involves the hotplug data structures and + * their bookkeeping */ @@ -2393,7 +2403,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func if (rc) return rc; - if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ + if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* set Primary bus */ dbg("set Primary bus = %d\n", func->bus); rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus); @@ -2484,7 +2494,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func temp_resources.irqs = &irqs; /* Make copies of the nodes we are going to pass down so that - * if there is a problem,we can just use these to free resources */ + * if there is a problem,we can just use these to free resources + */ hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL); hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL); hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL); @@ -2556,7 +2567,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16; rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - /* Adjust this to compensate for extra adjustment in first loop */ + /* Adjust this to compensate for extra adjustment in first loop + */ irqs.barber_pole--; rc = 0; @@ -2917,27 +2929,26 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func } /* End of base register loop */ if (cpqhp_legacy_mode) { /* Figure out which interrupt pin this function uses */ - rc = pci_bus_read_config_byte (pci_bus, devfn, + rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_INTERRUPT_PIN, &temp_byte); /* If this function needs an interrupt and we are behind * a bridge and the pin is tied to something that's * alread mapped, set this one the same */ - if (temp_byte && resources->irqs && - (resources->irqs->valid_INT & + if (temp_byte && resources->irqs && + (resources->irqs->valid_INT & (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) { /* We have to share with something already set up */ - IRQ = resources->irqs->interrupt[(temp_byte + + IRQ = resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03]; } else { /* Program IRQ based on card type */ rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); - if (class_code == PCI_BASE_CLASS_STORAGE) { + if (class_code == PCI_BASE_CLASS_STORAGE) IRQ = cpqhp_disk_irq; - } else { + else IRQ = cpqhp_nic_irq; - } } /* IRQ Line */ diff --git a/drivers/pci/hotplug/cpqphp_nvram.c b/drivers/pci/hotplug/cpqphp_nvram.c index cb174888002b..76ba8a1c774d 100644 --- a/drivers/pci/hotplug/cpqphp_nvram.c +++ b/drivers/pci/hotplug/cpqphp_nvram.c @@ -94,12 +94,13 @@ static u8 evbuffer[1024]; static void __iomem *compaq_int15_entry_point; -static spinlock_t int15_lock; /* lock for ordering int15_bios_call() */ +/* lock for ordering int15_bios_call() */ +static spinlock_t int15_lock; /* This is a series of function that deals with - setting & getting the hotplug resource table in some environment variable. -*/ + * setting & getting the hotplug resource table in some environment variable. + */ /* * We really shouldn't be doing this unless there is a _very_ good reason to!!! @@ -113,7 +114,7 @@ static u32 add_byte( u32 **p_buffer, u8 value, u32 *used, u32 *avail) if ((*used + 1) > *avail) return(1); - + *((u8*)*p_buffer) = value; tByte = (u8**)p_buffer; (*tByte)++; @@ -170,10 +171,10 @@ static u32 access_EV (u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size) unsigned long flags; int op = operation; int ret_val; - + if (!compaq_int15_entry_point) return -ENODEV; - + spin_lock_irqsave(&int15_lock, flags); __asm__ ( "xorl %%ebx,%%ebx\n" \ @@ -187,7 +188,7 @@ static u32 access_EV (u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size) "D" (buffer), "m" (compaq_int15_entry_point) : "%ebx", "%edx"); spin_unlock_irqrestore(&int15_lock, flags); - + return((ret_val & 0xFF00) >> 8); } @@ -210,14 +211,16 @@ static int load_HRT (void __iomem *rom_start) available = 1024; - // Now load the EV + /* Now load the EV */ temp_dword = available; rc = access_EV(READ_EV, "CQTHPS", evbuffer, &temp_dword); evbuffer_length = temp_dword; - // We're maintaining the resource lists so write FF to invalidate old info + /* We're maintaining the resource lists so write FF to invalidate old + * info + */ temp_dword = 1; rc = access_EV(WRITE_EV, "CQTHPS", &temp_byte, &temp_dword); @@ -263,13 +266,13 @@ static u32 store_HRT (void __iomem *rom_start) p_EV_header = (struct ev_hrt_header *) pFill; ctrl = cpqhp_ctrl_list; - - // The revision of this structure + + /* The revision of this structure */ rc = add_byte( &pFill, 1 + ctrl->push_flag, &usedbytes, &available); if (rc) return(rc); - // The number of controllers + /* The number of controllers */ rc = add_byte( &pFill, 1, &usedbytes, &available); if (rc) return(rc); @@ -279,27 +282,27 @@ static u32 store_HRT (void __iomem *rom_start) numCtrl++; - // The bus number + /* The bus number */ rc = add_byte( &pFill, ctrl->bus, &usedbytes, &available); if (rc) return(rc); - // The device Number + /* The device Number */ rc = add_byte( &pFill, PCI_SLOT(ctrl->pci_dev->devfn), &usedbytes, &available); if (rc) return(rc); - // The function Number + /* The function Number */ rc = add_byte( &pFill, PCI_FUNC(ctrl->pci_dev->devfn), &usedbytes, &available); if (rc) return(rc); - // Skip the number of available entries + /* Skip the number of available entries */ rc = add_dword( &pFill, 0, &usedbytes, &available); if (rc) return(rc); - // Figure out memory Available + /* Figure out memory Available */ resNode = ctrl->mem_head; @@ -308,12 +311,12 @@ static u32 store_HRT (void __iomem *rom_start) while (resNode) { loop ++; - // base + /* base */ rc = add_dword( &pFill, resNode->base, &usedbytes, &available); if (rc) return(rc); - // length + /* length */ rc = add_dword( &pFill, resNode->length, &usedbytes, &available); if (rc) return(rc); @@ -321,10 +324,10 @@ static u32 store_HRT (void __iomem *rom_start) resNode = resNode->next; } - // Fill in the number of entries + /* Fill in the number of entries */ p_ev_ctrl->mem_avail = loop; - // Figure out prefetchable memory Available + /* Figure out prefetchable memory Available */ resNode = ctrl->p_mem_head; @@ -333,12 +336,12 @@ static u32 store_HRT (void __iomem *rom_start) while (resNode) { loop ++; - // base + /* base */ rc = add_dword( &pFill, resNode->base, &usedbytes, &available); if (rc) return(rc); - // length + /* length */ rc = add_dword( &pFill, resNode->length, &usedbytes, &available); if (rc) return(rc); @@ -346,10 +349,10 @@ static u32 store_HRT (void __iomem *rom_start) resNode = resNode->next; } - // Fill in the number of entries + /* Fill in the number of entries */ p_ev_ctrl->p_mem_avail = loop; - // Figure out IO Available + /* Figure out IO Available */ resNode = ctrl->io_head; @@ -358,12 +361,12 @@ static u32 store_HRT (void __iomem *rom_start) while (resNode) { loop ++; - // base + /* base */ rc = add_dword( &pFill, resNode->base, &usedbytes, &available); if (rc) return(rc); - // length + /* length */ rc = add_dword( &pFill, resNode->length, &usedbytes, &available); if (rc) return(rc); @@ -371,10 +374,10 @@ static u32 store_HRT (void __iomem *rom_start) resNode = resNode->next; } - // Fill in the number of entries + /* Fill in the number of entries */ p_ev_ctrl->io_avail = loop; - // Figure out bus Available + /* Figure out bus Available */ resNode = ctrl->bus_head; @@ -383,12 +386,12 @@ static u32 store_HRT (void __iomem *rom_start) while (resNode) { loop ++; - // base + /* base */ rc = add_dword( &pFill, resNode->base, &usedbytes, &available); if (rc) return(rc); - // length + /* length */ rc = add_dword( &pFill, resNode->length, &usedbytes, &available); if (rc) return(rc); @@ -396,15 +399,15 @@ static u32 store_HRT (void __iomem *rom_start) resNode = resNode->next; } - // Fill in the number of entries + /* Fill in the number of entries */ p_ev_ctrl->bus_avail = loop; ctrl = ctrl->next; } - + p_EV_header->num_of_ctrl = numCtrl; - // Now store the EV + /* Now store the EV */ temp_dword = usedbytes; @@ -449,20 +452,21 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) struct ev_hrt_header *p_EV_header; if (!evbuffer_init) { - // Read the resource list information in from NVRAM + /* Read the resource list information in from NVRAM */ if (load_HRT(rom_start)) memset (evbuffer, 0, 1024); evbuffer_init = 1; } - // If we saved information in NVRAM, use it now + /* If we saved information in NVRAM, use it now */ p_EV_header = (struct ev_hrt_header *) evbuffer; - // The following code is for systems where version 1.0 of this - // driver has been loaded, but doesn't support the hardware. - // In that case, the driver would incorrectly store something - // in NVRAM. + /* The following code is for systems where version 1.0 of this + * driver has been loaded, but doesn't support the hardware. + * In that case, the driver would incorrectly store something + * in NVRAM. + */ if ((p_EV_header->Version == 2) || ((p_EV_header->Version == 1) && !ctrl->push_flag)) { p_byte = &(p_EV_header->next); @@ -479,7 +483,7 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) function = p_ev_ctrl->function; while ((bus != ctrl->bus) || - (device != PCI_SLOT(ctrl->pci_dev->devfn)) || + (device != PCI_SLOT(ctrl->pci_dev->devfn)) || (function != PCI_FUNC(ctrl->pci_dev->devfn))) { nummem = p_ev_ctrl->mem_avail; numpmem = p_ev_ctrl->p_mem_avail; @@ -491,7 +495,7 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) if (p_byte > ((u8*)p_EV_header + evbuffer_length)) return 2; - // Skip forward to the next entry + /* Skip forward to the next entry */ p_byte += (nummem + numpmem + numio + numbus) * 8; if (p_byte > ((u8*)p_EV_header + evbuffer_length)) @@ -629,8 +633,9 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) ctrl->bus_head = bus_node; } - // If all of the following fail, we don't have any resources for - // hot plug add + /* If all of the following fail, we don't have any resources for + * hot plug add + */ rc = 1; rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); @@ -640,14 +645,14 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) if (rc) return(rc); } else { - if ((evbuffer[0] != 0) && (!ctrl->push_flag)) + if ((evbuffer[0] != 0) && (!ctrl->push_flag)) return 1; } return 0; } - + int compaq_nvram_store (void __iomem *rom_start) { int rc = 1; diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c index 6c0ed0fcb8ee..6173b9a4544e 100644 --- a/drivers/pci/hotplug/cpqphp_pci.c +++ b/drivers/pci/hotplug/cpqphp_pci.c @@ -37,7 +37,6 @@ #include "../pci.h" #include "cpqphp.h" #include "cpqphp_nvram.h" -#include <asm/pci_x86.h> u8 cpqhp_nic_irq; @@ -82,14 +81,14 @@ static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iom } -int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) +int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) { unsigned char bus; struct pci_bus *child; int num; if (func->pci_dev == NULL) - func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function)); + func->pci_dev = pci_get_bus_and_slot(func->bus,PCI_DEVFN(func->device, func->function)); /* No pci device, we need to create it then */ if (func->pci_dev == NULL) { @@ -99,7 +98,7 @@ int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) if (num) pci_bus_add_devices(ctrl->pci_dev->bus); - func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function)); + func->pci_dev = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, func->function)); if (func->pci_dev == NULL) { dbg("ERROR: pci_dev still null\n"); return 0; @@ -112,20 +111,24 @@ int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) pci_do_scan_bus(child); } + pci_dev_put(func->pci_dev); + return 0; } -int cpqhp_unconfigure_device(struct pci_func* func) +int cpqhp_unconfigure_device(struct pci_func* func) { int j; - + dbg("%s: bus/dev/func = %x/%x/%x\n", __func__, func->bus, func->device, func->function); for (j=0; j<8 ; j++) { - struct pci_dev* temp = pci_find_slot(func->bus, PCI_DEVFN(func->device, j)); - if (temp) + struct pci_dev* temp = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, j)); + if (temp) { + pci_dev_put(temp); pci_remove_bus_device(temp); + } } return 0; } @@ -178,32 +181,22 @@ int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num) if (!rc) return !rc; - // set the Edge Level Control Register (ELCR) + /* set the Edge Level Control Register (ELCR) */ temp_word = inb(0x4d0); temp_word |= inb(0x4d1) << 8; temp_word |= 0x01 << irq_num; - // This should only be for x86 as it sets the Edge Level Control Register - outb((u8) (temp_word & 0xFF), 0x4d0); - outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1); - rc = 0; - } + /* This should only be for x86 as it sets the Edge Level + * Control Register + */ + outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word & + 0xFF00) >> 8), 0x4d1); rc = 0; } return rc; } -/* - * WTF??? This function isn't in the code, yet a function calls it, but the - * compiler optimizes it away? strange. Here as a placeholder to keep the - * compiler happy. - */ -static int PCI_ScanBusNonBridge (u8 bus, u8 device) -{ - return 0; -} - static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev_num) { u16 tdevice; @@ -213,11 +206,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev ctrl->pci_bus->number = bus_num; for (tdevice = 0; tdevice < 0xFF; tdevice++) { - //Scan for access first + /* Scan for access first */ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1) continue; dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice); - //Yep we got one. Not a bridge ? + /* Yep we got one. Not a bridge ? */ if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) { *dev_num = tdevice; dbg("found it !\n"); @@ -225,16 +218,16 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev } } for (tdevice = 0; tdevice < 0xFF; tdevice++) { - //Scan for access first + /* Scan for access first */ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1) continue; dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice); - //Yep we got one. bridge ? + /* Yep we got one. bridge ? */ if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) { pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus); + /* XXX: no recursion, wtf? */ dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice); - if (PCI_ScanBusNonBridge(tbus, tdevice) == 0) - return 0; + return 0; } } @@ -244,39 +237,23 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge) { - struct irq_routing_table *PCIIRQRoutingInfoLength; - long len; - long loop; + int loop, len; u32 work; - u8 tbus, tdevice, tslot; - PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table(); - if (!PCIIRQRoutingInfoLength) - return -1; - - len = (PCIIRQRoutingInfoLength->size - - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); - // Make sure I got at least one entry - if (len == 0) { - kfree(PCIIRQRoutingInfoLength ); - return -1; - } - + len = cpqhp_routing_table_length(); for (loop = 0; loop < len; ++loop) { - tbus = PCIIRQRoutingInfoLength->slots[loop].bus; - tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn; - tslot = PCIIRQRoutingInfoLength->slots[loop].slot; + tbus = cpqhp_routing_table->slots[loop].bus; + tdevice = cpqhp_routing_table->slots[loop].devfn; + tslot = cpqhp_routing_table->slots[loop].slot; if (tslot == slot) { *bus_num = tbus; *dev_num = tdevice; ctrl->pci_bus->number = tbus; pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work); - if (!nobridge || (work == 0xffffffff)) { - kfree(PCIIRQRoutingInfoLength ); + if (!nobridge || (work == 0xffffffff)) return 0; - } dbg("bus_num %d devfn %d\n", *bus_num, *dev_num); pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work); @@ -287,28 +264,26 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num dbg("Scan bus for Non Bridge: bus %d\n", tbus); if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) { *bus_num = tbus; - kfree(PCIIRQRoutingInfoLength ); return 0; } - } else { - kfree(PCIIRQRoutingInfoLength ); + } else return 0; - } - } } - kfree(PCIIRQRoutingInfoLength ); return -1; } int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot) { - return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); //plain (bridges allowed) + /* plain (bridges allowed) */ + return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); } -/* More PCI configuration routines; this time centered around hotplug controller */ +/* More PCI configuration routines; this time centered around hotplug + * controller + */ /* @@ -339,12 +314,12 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) int stop_it; int index; - // Decide which slots are supported + /* Decide which slots are supported */ if (is_hot_plug) { - //********************************* - // is_hot_plug is the slot mask - //********************************* + /* + * is_hot_plug is the slot mask + */ FirstSupported = is_hot_plug >> 4; LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1; } else { @@ -352,123 +327,127 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) LastSupported = 0x1F; } - // Save PCI configuration space for all devices in supported slots + /* Save PCI configuration space for all devices in supported slots */ ctrl->pci_bus->number = busnumber; for (device = FirstSupported; device <= LastSupported; device++) { ID = 0xFFFFFFFF; - rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID); + rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID); + + if (ID == 0xFFFFFFFF) { + if (is_hot_plug) { + /* Setup slot structure with entry for empty + * slot + */ + new_slot = cpqhp_slot_create(busnumber); + if (new_slot == NULL) + return 1; - if (ID != 0xFFFFFFFF) { // device in slot - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code); - if (rc) - return rc; + new_slot->bus = (u8) busnumber; + new_slot->device = (u8) device; + new_slot->function = 0; + new_slot->is_a_board = 0; + new_slot->presence_save = 0; + new_slot->switch_save = 0; + } + continue; + } - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code); + if (rc) + return rc; - // If multi-function device, set max_functions to 8 - if (header_type & 0x80) - max_functions = 8; - else - max_functions = 1; + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type); + if (rc) + return rc; - function = 0; + /* If multi-function device, set max_functions to 8 */ + if (header_type & 0x80) + max_functions = 8; + else + max_functions = 1; - do { - DevError = 0; + function = 0; - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // P-P Bridge - // Recurse the subordinate bus - // get the subordinate bus number - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus); - if (rc) { + do { + DevError = 0; + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Recurse the subordinate bus + * get the subordinate bus number + */ + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus); + if (rc) { + return rc; + } else { + sub_bus = (int) secondary_bus; + + /* Save secondary bus cfg spc + * with this recursive call. + */ + rc = cpqhp_save_config(ctrl, sub_bus, 0); + if (rc) return rc; - } else { - sub_bus = (int) secondary_bus; - - // Save secondary bus cfg spc - // with this recursive call. - rc = cpqhp_save_config(ctrl, sub_bus, 0); - if (rc) - return rc; - ctrl->pci_bus->number = busnumber; - } + ctrl->pci_bus->number = busnumber; } + } - index = 0; + index = 0; + new_slot = cpqhp_slot_find(busnumber, device, index++); + while (new_slot && + (new_slot->function != (u8) function)) new_slot = cpqhp_slot_find(busnumber, device, index++); - while (new_slot && - (new_slot->function != (u8) function)) - new_slot = cpqhp_slot_find(busnumber, device, index++); - if (!new_slot) { - // Setup slot structure. - new_slot = cpqhp_slot_create(busnumber); - - if (new_slot == NULL) - return(1); - } - - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = (u8) function; - new_slot->is_a_board = 1; - new_slot->switch_save = 0x10; - // In case of unsupported board - new_slot->status = DevError; - new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function); - - for (cloop = 0; cloop < 0x20; cloop++) { - rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); - if (rc) - return rc; - } + if (!new_slot) { + /* Setup slot structure. */ + new_slot = cpqhp_slot_create(busnumber); + if (new_slot == NULL) + return 1; + } - function++; + new_slot->bus = (u8) busnumber; + new_slot->device = (u8) device; + new_slot->function = (u8) function; + new_slot->is_a_board = 1; + new_slot->switch_save = 0x10; + /* In case of unsupported board */ + new_slot->status = DevError; + new_slot->pci_dev = pci_get_bus_and_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function); - stop_it = 0; + for (cloop = 0; cloop < 0x20; cloop++) { + rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); + if (rc) + return rc; + } - // this loop skips to the next present function - // reading in Class Code and Header type. + pci_dev_put(new_slot->pci_dev); - while ((function < max_functions)&&(!stop_it)) { - rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID); - if (ID == 0xFFFFFFFF) { // nothing there. - function++; - } else { // Something there - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code); - if (rc) - return rc; + function++; - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; + stop_it = 0; - stop_it++; - } + /* this loop skips to the next present function + * reading in Class Code and Header type. + */ + while ((function < max_functions) && (!stop_it)) { + rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID); + if (ID == 0xFFFFFFFF) { + function++; + continue; } + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code); + if (rc) + return rc; - } while (function < max_functions); - } // End of IF (device in slot?) - else if (is_hot_plug) { - // Setup slot structure with entry for empty slot - new_slot = cpqhp_slot_create(busnumber); + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type); + if (rc) + return rc; - if (new_slot == NULL) { - return(1); + stop_it++; } - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = 0; - new_slot->is_a_board = 0; - new_slot->presence_save = 0; - new_slot->switch_save = 0; - } - } // End of FOR loop + } while (function < max_functions); + } /* End of FOR loop */ - return(0); + return 0; } @@ -489,7 +468,7 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot) u8 secondary_bus; int sub_bus; int max_functions; - int function; + int function = 0; int cloop = 0; int stop_it; @@ -498,63 +477,58 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot) ctrl->pci_bus->number = new_slot->bus; pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID); - if (ID != 0xFFFFFFFF) { // device in slot - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code); - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type); - - if (header_type & 0x80) // Multi-function device - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge - // Recurse the subordinate bus - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus); + if (ID == 0xFFFFFFFF) + return 2; - sub_bus = (int) secondary_bus; + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code); + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type); - // Save the config headers for the secondary bus. - rc = cpqhp_save_config(ctrl, sub_bus, 0); - if (rc) - return(rc); - ctrl->pci_bus->number = new_slot->bus; + if (header_type & 0x80) /* Multi-function device */ + max_functions = 8; + else + max_functions = 1; - } // End of IF + while (function < max_functions) { + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Recurse the subordinate bus */ + pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus); - new_slot->status = 0; + sub_bus = (int) secondary_bus; - for (cloop = 0; cloop < 0x20; cloop++) { - pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); - } + /* Save the config headers for the secondary + * bus. + */ + rc = cpqhp_save_config(ctrl, sub_bus, 0); + if (rc) + return(rc); + ctrl->pci_bus->number = new_slot->bus; - function++; + } - stop_it = 0; + new_slot->status = 0; - // this loop skips to the next present function - // reading in the Class Code and the Header type. + for (cloop = 0; cloop < 0x20; cloop++) + pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); - while ((function < max_functions) && (!stop_it)) { - pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID); + function++; - if (ID == 0xFFFFFFFF) { // nothing there. - function++; - } else { // Something there - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code); + stop_it = 0; - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type); + /* this loop skips to the next present function + * reading in the Class Code and the Header type. + */ + while ((function < max_functions) && (!stop_it)) { + pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID); - stop_it++; - } + if (ID == 0xFFFFFFFF) + function++; + else { + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code); + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type); + stop_it++; } + } - } while (function < max_functions); - } // End of IF (device in slot?) - else { - return 2; } return 0; @@ -590,11 +564,10 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - // Check for Bridge + /* Check for Bridge */ pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { - // PCI-PCI Bridge pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); sub_bus = (int) secondary_bus; @@ -610,23 +583,27 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) } pci_bus->number = func->bus; - //FIXME: this loop is duplicated in the non-bridge case. The two could be rolled together - // Figure out IO and memory base lengths + /* FIXME: this loop is duplicated in the non-bridge + * case. The two could be rolled together Figure out + * IO and memory base lengths + */ for (cloop = 0x10; cloop <= 0x14; cloop += 4) { temp_register = 0xFFFFFFFF; pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); - - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (base & 0x01L) { - // IO base - // set base = amount of IO space requested + /* IO base + * set base = amount of IO space + * requested + */ base = base & 0xFFFFFFFE; base = (~base) + 1; type = 1; } else { - // memory base + /* memory base */ base = base & 0xFFFFFFF0; base = (~base) + 1; @@ -637,32 +614,36 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) type = 0; } - // Save information in slot structure + /* Save information in slot structure */ func->base_length[(cloop - 0x10) >> 2] = base; func->base_type[(cloop - 0x10) >> 2] = type; - } // End of base register loop + } /* End of base register loop */ - - } else if ((header_type & 0x7F) == 0x00) { // PCI-PCI Bridge - // Figure out IO and memory base lengths + } else if ((header_type & 0x7F) == 0x00) { + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x24; cloop += 4) { temp_register = 0xFFFFFFFF; pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (base & 0x01L) { - // IO base - // base = amount of IO space requested + /* IO base + * base = amount of IO space + * requested + */ base = base & 0xFFFFFFFE; base = (~base) + 1; type = 1; } else { - // memory base - // base = amount of memory space requested + /* memory base + * base = amount of memory + * space requested + */ base = base & 0xFFFFFFF0; base = (~base) + 1; @@ -673,16 +654,16 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) type = 0; } - // Save information in slot structure + /* Save information in slot structure */ func->base_length[(cloop - 0x10) >> 2] = base; func->base_type[(cloop - 0x10) >> 2] = type; - } // End of base register loop + } /* End of base register loop */ - } else { // Some other unknown header type + } else { /* Some other unknown header type */ } - // find the next device in this slot + /* find the next device in this slot */ func = cpqhp_slot_find(func->bus, func->device, index++); } @@ -728,18 +709,18 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - // Save the command register + /* Save the command register */ pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command); - // disable card + /* disable card */ command = 0x00; pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - // Check for Bridge + /* Check for Bridge */ pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge - // Clear Bridge Control Register + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Clear Bridge Control Register */ command = 0x00; pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command); pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); @@ -755,7 +736,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) bus_node->next = func->bus_head; func->bus_head = bus_node; - // Save IO base and Limit registers + /* Save IO base and Limit registers */ pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base); pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length); @@ -771,7 +752,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) func->io_head = io_node; } - // Save memory base and Limit registers + /* Save memory base and Limit registers */ pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base); pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length); @@ -787,7 +768,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) func->mem_head = mem_node; } - // Save prefetchable memory base and Limit registers + /* Save prefetchable memory base and Limit registers */ pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base); pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length); @@ -802,7 +783,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) p_mem_node->next = func->p_mem_head; func->p_mem_head = p_mem_node; } - // Figure out IO and memory base lengths + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x14; cloop += 4) { pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base); @@ -812,11 +793,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) temp_register = base; - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (((base & 0x03L) == 0x01) && (save_command & 0x01)) { - // IO base - // set temp_register = amount of IO space requested + /* IO base + * set temp_register = amount + * of IO space requested + */ temp_register = base & 0xFFFFFFFE; temp_register = (~temp_register) + 1; @@ -834,7 +818,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x08) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -851,7 +835,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x00) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -868,9 +852,10 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else return(1); } - } // End of base register loop - } else if ((header_type & 0x7F) == 0x00) { // Standard header - // Figure out IO and memory base lengths + } /* End of base register loop */ + /* Standard header */ + } else if ((header_type & 0x7F) == 0x00) { + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x24; cloop += 4) { pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base); @@ -880,11 +865,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) temp_register = base; - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (((base & 0x03L) == 0x01) && (save_command & 0x01)) { - // IO base - // set temp_register = amount of IO space requested + /* IO base + * set temp_register = amount + * of IO space requested + */ temp_register = base & 0xFFFFFFFE; temp_register = (~temp_register) + 1; @@ -901,7 +889,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x08) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -918,7 +906,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x00) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -935,15 +923,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else return(1); } - } // End of base register loop - } else { // Some other unknown header type + } /* End of base register loop */ } - // find the next device in this slot + /* find the next device in this slot */ func = cpqhp_slot_find(func->bus, func->device, index++); } - return(0); + return 0; } @@ -975,16 +962,16 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func) pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - // Start at the top of config space so that the control - // registers are programmed last - for (cloop = 0x3C; cloop > 0; cloop -= 4) { + /* Start at the top of config space so that the control + * registers are programmed last + */ + for (cloop = 0x3C; cloop > 0; cloop -= 4) pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]); - } pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - // If this is a bridge device, restore subordinate devices - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge + /* If this is a bridge device, restore subordinate devices */ + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); sub_bus = (int) secondary_bus; @@ -1000,8 +987,9 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func) } } else { - // Check all the base Address Registers to make sure - // they are the same. If not, the board is different. + /* Check all the base Address Registers to make sure + * they are the same. If not, the board is different. + */ for (cloop = 16; cloop < 40; cloop += 4) { pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp); @@ -1058,27 +1046,28 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register); - // No adapter present + /* No adapter present */ if (temp_register == 0xFFFFFFFF) return(NO_ADAPTER_PRESENT); if (temp_register != func->config_space[0]) return(ADAPTER_NOT_SAME); - // Check for same revision number and class code + /* Check for same revision number and class code */ pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register); - // Adapter not the same + /* Adapter not the same */ if (temp_register != func->config_space[0x08 >> 2]) return(ADAPTER_NOT_SAME); - // Check for Bridge + /* Check for Bridge */ pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge - // In order to continue checking, we must program the - // bus registers in the bridge to respond to accesses - // for it's subordinate bus(es) + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* In order to continue checking, we must program the + * bus registers in the bridge to respond to accesses + * for its subordinate bus(es) + */ temp_register = func->config_space[0x18 >> 2]; pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register); @@ -1096,35 +1085,39 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) } } - // Check to see if it is a standard config header + /* Check to see if it is a standard config header */ else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) { - // Check subsystem vendor and ID + /* Check subsystem vendor and ID */ pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register); if (temp_register != func->config_space[0x2C >> 2]) { - // If it's a SMART-2 and the register isn't filled - // in, ignore the difference because - // they just have an old rev of the firmware - + /* If it's a SMART-2 and the register isn't + * filled in, ignore the difference because + * they just have an old rev of the firmware + */ if (!((func->config_space[0] == 0xAE100E11) && (temp_register == 0x00L))) return(ADAPTER_NOT_SAME); } - // Figure out IO and memory base lengths + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x24; cloop += 4) { temp_register = 0xFFFFFFFF; pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); - if (base) { // If this register is implemented + + /* If this register is implemented */ + if (base) { if (base & 0x01L) { - // IO base - // set base = amount of IO space requested + /* IO base + * set base = amount of IO + * space requested + */ base = base & 0xFFFFFFFE; base = (~base) + 1; type = 1; } else { - // memory base + /* memory base */ base = base & 0xFFFFFFF0; base = (~base) + 1; @@ -1135,23 +1128,24 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) type = 0; } - // Check information in slot structure + /* Check information in slot structure */ if (func->base_length[(cloop - 0x10) >> 2] != base) return(ADAPTER_NOT_SAME); if (func->base_type[(cloop - 0x10) >> 2] != type) return(ADAPTER_NOT_SAME); - } // End of base register loop + } /* End of base register loop */ - } // End of (type 0 config space) else + } /* End of (type 0 config space) else */ else { - // this is not a type 0 or 1 config space header so - // we don't know how to do it + /* this is not a type 0 or 1 config space header so + * we don't know how to do it + */ return(DEVICE_TYPE_NOT_SUPPORTED); } - // Get the next function + /* Get the next function */ func = cpqhp_slot_find(func->bus, func->device, index++); } @@ -1168,7 +1162,7 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) * this function is for hot plug ADD! * * returns 0 if success - */ + */ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start) { u8 temp; @@ -1187,10 +1181,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st rom_resource_table = detect_HRT_floating_pointer(rom_start, rom_start+0xffff); dbg("rom_resource_table = %p\n", rom_resource_table); - if (rom_resource_table == NULL) { + if (rom_resource_table == NULL) return -ENODEV; - } - // Sum all resources and setup resource maps + + /* Sum all resources and setup resource maps */ unused_IRQ = readl(rom_resource_table + UNUSED_IRQ); dbg("unused_IRQ = %x\n", unused_IRQ); @@ -1222,13 +1216,11 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st temp = 0; - if (!cpqhp_nic_irq) { + if (!cpqhp_nic_irq) cpqhp_nic_irq = ctrl->cfgspc_irq; - } - if (!cpqhp_disk_irq) { + if (!cpqhp_disk_irq) cpqhp_disk_irq = ctrl->cfgspc_irq; - } dbg("cpqhp_disk_irq, cpqhp_nic_irq= %d, %d\n", cpqhp_disk_irq, cpqhp_nic_irq); @@ -1262,13 +1254,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length, primary_bus, secondary_bus, max_bus); - // If this entry isn't for our controller's bus, ignore it + /* If this entry isn't for our controller's bus, ignore it */ if (primary_bus != ctrl->bus) { i--; one_slot += sizeof (struct slot_rt); continue; } - // find out if this entry is for an occupied slot + /* find out if this entry is for an occupied slot */ ctrl->pci_bus->number = primary_bus; pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword); dbg("temp_D_word = %x\n", temp_dword); @@ -1282,13 +1274,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++); } - // If we can't find a match, skip this table entry + /* If we can't find a match, skip this table entry */ if (!func) { i--; one_slot += sizeof (struct slot_rt); continue; } - // this may not work and shouldn't be used + /* this may not work and shouldn't be used */ if (secondary_bus != primary_bus) bridged_slot = 1; else @@ -1301,7 +1293,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } - // If we've got a valid IO base, use it + /* If we've got a valid IO base, use it */ temp_dword = io_base + io_length; @@ -1325,7 +1317,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } } - // If we've got a valid memory base, use it + /* If we've got a valid memory base, use it */ temp_dword = mem_base + mem_length; if ((mem_base) && (temp_dword < 0x10000)) { mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL); @@ -1348,8 +1340,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } } - // If we've got a valid prefetchable memory base, and - // the base + length isn't greater than 0xFFFF + /* If we've got a valid prefetchable memory base, and + * the base + length isn't greater than 0xFFFF + */ temp_dword = pre_mem_base + pre_mem_length; if ((pre_mem_base) && (temp_dword < 0x10000)) { p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL); @@ -1372,9 +1365,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } } - // If we've got a valid bus number, use it - // The second condition is to ignore bus numbers on - // populated slots that don't have PCI-PCI bridges + /* If we've got a valid bus number, use it + * The second condition is to ignore bus numbers on + * populated slots that don't have PCI-PCI bridges + */ if (secondary_bus && (secondary_bus != primary_bus)) { bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL); if (!bus_node) @@ -1398,8 +1392,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st one_slot += sizeof (struct slot_rt); } - // If all of the following fail, we don't have any resources for - // hot plug add + /* If all of the following fail, we don't have any resources for + * hot plug add + */ rc = 1; rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index 42e4260c3b12..7485ffda950c 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -1318,7 +1318,6 @@ error: } struct hotplug_slot_ops ibmphp_hotplug_slot_ops = { - .owner = THIS_MODULE, .set_attention_status = set_attention_status, .enable_slot = enable_slot, .disable_slot = ibmphp_disable_slot, @@ -1421,3 +1420,4 @@ static void __exit ibmphp_exit(void) } module_init(ibmphp_init); +module_exit(ibmphp_exit); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 535fce0f07f9..844580489d4d 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -347,125 +347,129 @@ static struct pci_slot_attribute hotplug_slot_attr_test = { .store = test_write_file }; -static int has_power_file(struct pci_slot *pci_slot) +static bool has_power_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) - return -ENODEV; + return false; if ((slot->ops->enable_slot) || (slot->ops->disable_slot) || (slot->ops->get_power_status)) - return 0; - return -ENOENT; + return true; + return false; } -static int has_attention_file(struct pci_slot *pci_slot) +static bool has_attention_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) - return -ENODEV; + return false; if ((slot->ops->set_attention_status) || (slot->ops->get_attention_status)) - return 0; - return -ENOENT; + return true; + return false; } -static int has_latch_file(struct pci_slot *pci_slot) +static bool has_latch_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) - return -ENODEV; + return false; if (slot->ops->get_latch_status) - return 0; - return -ENOENT; + return true; + return false; } -static int has_adapter_file(struct pci_slot *pci_slot) +static bool has_adapter_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) - return -ENODEV; + return false; if (slot->ops->get_adapter_status) - return 0; - return -ENOENT; + return true; + return false; } -static int has_max_bus_speed_file(struct pci_slot *pci_slot) +static bool has_max_bus_speed_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) - return -ENODEV; + return false; if (slot->ops->get_max_bus_speed) - return 0; - return -ENOENT; + return true; + return false; } -static int has_cur_bus_speed_file(struct pci_slot *pci_slot) +static bool has_cur_bus_speed_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) - return -ENODEV; + return false; if (slot->ops->get_cur_bus_speed) - return 0; - return -ENOENT; + return true; + return false; } -static int has_test_file(struct pci_slot *pci_slot) +static bool has_test_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) - return -ENODEV; + return false; if (slot->ops->hardware_test) - return 0; - return -ENOENT; + return true; + return false; } static int fs_add_slot(struct pci_slot *slot) { int retval = 0; - if (has_power_file(slot) == 0) { - retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_power.attr); + /* Create symbolic link to the hotplug driver module */ + pci_hp_create_module_link(slot); + + if (has_power_file(slot)) { + retval = sysfs_create_file(&slot->kobj, + &hotplug_slot_attr_power.attr); if (retval) goto exit_power; } - if (has_attention_file(slot) == 0) { + if (has_attention_file(slot)) { retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_attention.attr); if (retval) goto exit_attention; } - if (has_latch_file(slot) == 0) { + if (has_latch_file(slot)) { retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_latch.attr); if (retval) goto exit_latch; } - if (has_adapter_file(slot) == 0) { + if (has_adapter_file(slot)) { retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_presence.attr); if (retval) goto exit_adapter; } - if (has_max_bus_speed_file(slot) == 0) { + if (has_max_bus_speed_file(slot)) { retval = sysfs_create_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); + &hotplug_slot_attr_max_bus_speed.attr); if (retval) goto exit_max_speed; } - if (has_cur_bus_speed_file(slot) == 0) { + if (has_cur_bus_speed_file(slot)) { retval = sysfs_create_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); + &hotplug_slot_attr_cur_bus_speed.attr); if (retval) goto exit_cur_speed; } - if (has_test_file(slot) == 0) { + if (has_test_file(slot)) { retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_test.attr); if (retval) @@ -475,55 +479,61 @@ static int fs_add_slot(struct pci_slot *slot) goto exit; exit_test: - if (has_cur_bus_speed_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr); - + if (has_cur_bus_speed_file(slot)) + sysfs_remove_file(&slot->kobj, + &hotplug_slot_attr_cur_bus_speed.attr); exit_cur_speed: - if (has_max_bus_speed_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr); - + if (has_max_bus_speed_file(slot)) + sysfs_remove_file(&slot->kobj, + &hotplug_slot_attr_max_bus_speed.attr); exit_max_speed: - if (has_adapter_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); - + if (has_adapter_file(slot)) + sysfs_remove_file(&slot->kobj, + &hotplug_slot_attr_presence.attr); exit_adapter: - if (has_latch_file(slot) == 0) + if (has_latch_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_latch.attr); - exit_latch: - if (has_attention_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_attention.attr); - + if (has_attention_file(slot)) + sysfs_remove_file(&slot->kobj, + &hotplug_slot_attr_attention.attr); exit_attention: - if (has_power_file(slot) == 0) + if (has_power_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr); exit_power: + pci_hp_remove_module_link(slot); exit: return retval; } static void fs_remove_slot(struct pci_slot *slot) { - if (has_power_file(slot) == 0) + if (has_power_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr); - if (has_attention_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_attention.attr); + if (has_attention_file(slot)) + sysfs_remove_file(&slot->kobj, + &hotplug_slot_attr_attention.attr); - if (has_latch_file(slot) == 0) + if (has_latch_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_latch.attr); - if (has_adapter_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); + if (has_adapter_file(slot)) + sysfs_remove_file(&slot->kobj, + &hotplug_slot_attr_presence.attr); - if (has_max_bus_speed_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr); + if (has_max_bus_speed_file(slot)) + sysfs_remove_file(&slot->kobj, + &hotplug_slot_attr_max_bus_speed.attr); - if (has_cur_bus_speed_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr); + if (has_cur_bus_speed_file(slot)) + sysfs_remove_file(&slot->kobj, + &hotplug_slot_attr_cur_bus_speed.attr); - if (has_test_file(slot) == 0) + if (has_test_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr); + + pci_hp_remove_module_link(slot); } static struct hotplug_slot *get_slot_from_name (const char *name) @@ -540,10 +550,10 @@ static struct hotplug_slot *get_slot_from_name (const char *name) } /** - * pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem + * __pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem * @bus: bus this slot is on * @slot: pointer to the &struct hotplug_slot to register - * @slot_nr: slot number + * @devnr: device number * @name: name registered with kobject core * * Registers a hotplug slot with the pci hotplug subsystem, which will allow @@ -551,8 +561,9 @@ static struct hotplug_slot *get_slot_from_name (const char *name) * * Returns 0 if successful, anything else for an error. */ -int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr, - const char *name) +int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, + int devnr, const char *name, + struct module *owner, const char *mod_name) { int result; struct pci_slot *pci_slot; @@ -567,14 +578,16 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr, return -EINVAL; } - mutex_lock(&pci_hp_mutex); + slot->ops->owner = owner; + slot->ops->mod_name = mod_name; + mutex_lock(&pci_hp_mutex); /* * No problems if we call this interface from both ACPI_PCI_SLOT * driver and call it here again. If we've already created the * pci_slot, the interface will simply bump the refcount. */ - pci_slot = pci_create_slot(bus, slot_nr, name, slot); + pci_slot = pci_create_slot(bus, devnr, name, slot); if (IS_ERR(pci_slot)) { result = PTR_ERR(pci_slot); goto out; @@ -684,6 +697,6 @@ MODULE_LICENSE("GPL"); module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); -EXPORT_SYMBOL_GPL(pci_hp_register); +EXPORT_SYMBOL_GPL(__pci_hp_register); EXPORT_SYMBOL_GPL(pci_hp_deregister); EXPORT_SYMBOL_GPL(pci_hp_change_slot_info); diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 0a368547e633..e6cf096498be 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -81,7 +81,6 @@ struct slot { struct hpc_ops *hpc_ops; struct hotplug_slot *hotplug_slot; struct list_head slot_list; - unsigned long last_emi_toggle; struct delayed_work work; /* work for button event */ struct mutex lock; }; @@ -203,8 +202,6 @@ struct hpc_ops { int (*set_attention_status)(struct slot *slot, u8 status); int (*get_latch_status)(struct slot *slot, u8 *status); int (*get_adapter_status)(struct slot *slot, u8 *status); - int (*get_emi_status)(struct slot *slot, u8 *status); - int (*toggle_emi)(struct slot *slot); int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed); int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed); int (*get_max_lnk_width)(struct slot *slot, enum pcie_link_width *val); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index fb254b2454de..2317557fdee6 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -73,7 +73,6 @@ static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *val static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); static struct hotplug_slot_ops pciehp_hotplug_slot_ops = { - .owner = THIS_MODULE, .set_attention_status = set_attention_status, .enable_slot = enable_slot, .disable_slot = disable_slot, @@ -85,99 +84,6 @@ static struct hotplug_slot_ops pciehp_hotplug_slot_ops = { .get_cur_bus_speed = get_cur_bus_speed, }; -/* - * Check the status of the Electro Mechanical Interlock (EMI) - */ -static int get_lock_status(struct hotplug_slot *hotplug_slot, u8 *value) -{ - struct slot *slot = hotplug_slot->private; - return (slot->hpc_ops->get_emi_status(slot, value)); -} - -/* - * sysfs interface for the Electro Mechanical Interlock (EMI) - * 1 == locked, 0 == unlocked - */ -static ssize_t lock_read_file(struct hotplug_slot *slot, char *buf) -{ - int retval; - u8 value; - - retval = get_lock_status(slot, &value); - if (retval) - goto lock_read_exit; - retval = sprintf (buf, "%d\n", value); - -lock_read_exit: - return retval; -} - -/* - * Change the status of the Electro Mechanical Interlock (EMI) - * This is a toggle - in addition there must be at least 1 second - * in between toggles. - */ -static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status) -{ - struct slot *slot = hotplug_slot->private; - int retval; - u8 value; - - mutex_lock(&slot->ctrl->crit_sect); - - /* has it been >1 sec since our last toggle? */ - if ((get_seconds() - slot->last_emi_toggle) < 1) { - mutex_unlock(&slot->ctrl->crit_sect); - return -EINVAL; - } - - /* see what our current state is */ - retval = get_lock_status(hotplug_slot, &value); - if (retval || (value == status)) - goto set_lock_exit; - - slot->hpc_ops->toggle_emi(slot); -set_lock_exit: - mutex_unlock(&slot->ctrl->crit_sect); - return 0; -} - -/* - * sysfs interface which allows the user to toggle the Electro Mechanical - * Interlock. Valid values are either 0 or 1. 0 == unlock, 1 == lock - */ -static ssize_t lock_write_file(struct hotplug_slot *hotplug_slot, - const char *buf, size_t count) -{ - struct slot *slot = hotplug_slot->private; - unsigned long llock; - u8 lock; - int retval = 0; - - llock = simple_strtoul(buf, NULL, 10); - lock = (u8)(llock & 0xff); - - switch (lock) { - case 0: - case 1: - retval = set_lock_status(hotplug_slot, lock); - break; - default: - ctrl_err(slot->ctrl, "%d is an invalid lock value\n", - lock); - retval = -EINVAL; - } - if (retval) - return retval; - return count; -} - -static struct hotplug_slot_attribute hotplug_slot_attr_lock = { - .attr = {.name = "lock", .mode = S_IFREG | S_IRUGO | S_IWUSR}, - .show = lock_read_file, - .store = lock_write_file -}; - /** * release_slot - free up the memory used by a slot * @hotplug_slot: slot to free @@ -236,17 +142,6 @@ static int init_slots(struct controller *ctrl) get_attention_status(hotplug_slot, &info->attention_status); get_latch_status(hotplug_slot, &info->latch_status); get_adapter_status(hotplug_slot, &info->adapter_status); - /* create additional sysfs entries */ - if (EMI(ctrl)) { - retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj, - &hotplug_slot_attr_lock.attr); - if (retval) { - pci_hp_deregister(hotplug_slot); - ctrl_err(ctrl, "Cannot create additional sysfs " - "entries\n"); - goto error_info; - } - } } return 0; @@ -261,13 +156,8 @@ error: static void cleanup_slots(struct controller *ctrl) { struct slot *slot; - - list_for_each_entry(slot, &ctrl->slot_list, slot_list) { - if (EMI(ctrl)) - sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj, - &hotplug_slot_attr_lock.attr); + list_for_each_entry(slot, &ctrl->slot_list, slot_list) pci_hp_deregister(slot->hotplug_slot); - } } /* diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 07bd32151146..52813257e5bf 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -422,35 +422,6 @@ static int hpc_query_power_fault(struct slot *slot) return !!(slot_status & PCI_EXP_SLTSTA_PFD); } -static int hpc_get_emi_status(struct slot *slot, u8 *status) -{ - struct controller *ctrl = slot->ctrl; - u16 slot_status; - int retval; - - retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status); - if (retval) { - ctrl_err(ctrl, "Cannot check EMI status\n"); - return retval; - } - *status = !!(slot_status & PCI_EXP_SLTSTA_EIS); - return retval; -} - -static int hpc_toggle_emi(struct slot *slot) -{ - u16 slot_cmd; - u16 cmd_mask; - int rc; - - slot_cmd = PCI_EXP_SLTCTL_EIC; - cmd_mask = PCI_EXP_SLTCTL_EIC; - rc = pcie_write_cmd(slot->ctrl, slot_cmd, cmd_mask); - slot->last_emi_toggle = get_seconds(); - - return rc; -} - static int hpc_set_attention_status(struct slot *slot, u8 value) { struct controller *ctrl = slot->ctrl; @@ -874,8 +845,6 @@ static struct hpc_ops pciehp_hpc_ops = { .get_attention_status = hpc_get_attention_status, .get_latch_status = hpc_get_latch_status, .get_adapter_status = hpc_get_adapter_status, - .get_emi_status = hpc_get_emi_status, - .toggle_emi = hpc_toggle_emi, .get_max_bus_speed = hpc_get_max_lnk_speed, .get_cur_bus_speed = hpc_get_cur_lnk_speed, diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c index e3dd6cf9e89f..5175d9b26f0b 100644 --- a/drivers/pci/hotplug/pcihp_skeleton.c +++ b/drivers/pci/hotplug/pcihp_skeleton.c @@ -82,7 +82,6 @@ static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); static struct hotplug_slot_ops skel_hotplug_slot_ops = { - .owner = THIS_MODULE, .enable_slot = enable_slot, .disable_slot = disable_slot, .set_attention_status = set_attention_status, diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 95d02a08fdc7..c159223389ec 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -423,7 +423,6 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) } struct hotplug_slot_ops rpaphp_hotplug_slot_ops = { - .owner = THIS_MODULE, .enable_slot = enable_slot, .disable_slot = disable_slot, .set_attention_status = set_attention_status, diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index 2d6da78fddb6..a4494d78e7c2 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -83,7 +83,6 @@ static int disable_slot(struct hotplug_slot *slot); static inline int get_power_status(struct hotplug_slot *slot, u8 *value); static struct hotplug_slot_ops sn_hotplug_slot_ops = { - .owner = THIS_MODULE, .enable_slot = enable_slot, .disable_slot = disable_slot, .get_power_status = get_power_status, diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index fe8d149c2293..8a520a3d0f59 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -69,7 +69,6 @@ static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *val static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); static struct hotplug_slot_ops shpchp_hotplug_slot_ops = { - .owner = THIS_MODULE, .set_attention_status = set_attention_status, .enable_slot = enable_slot, .disable_slot = disable_slot, diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index b497daab3d4a..03c7706c0a09 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -110,7 +110,7 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset) } if (reset) - pci_execute_reset_function(virtfn); + __pci_reset_function(virtfn); pci_device_add(virtfn, virtfn->bus); mutex_unlock(&iov->dev->sriov->lock); @@ -164,7 +164,7 @@ static void virtfn_remove(struct pci_dev *dev, int id, int reset) if (reset) { device_release_driver(&virtfn->dev); - pci_execute_reset_function(virtfn); + __pci_reset_function(virtfn); } sprintf(buf, "virtfn%u", id); @@ -487,6 +487,8 @@ found: iov->self = dev; pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap); pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link); + if (dev->pcie_type == PCI_EXP_TYPE_RC_END) + iov->link = PCI_DEVFN(PCI_SLOT(dev->devfn), iov->link); if (pdev) iov->dev = pci_dev_get(pdev); diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 362773247fbf..d9f06fbfa0bf 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -75,22 +75,17 @@ void arch_teardown_msi_irqs(struct pci_dev *dev) } #endif -static void __msi_set_enable(struct pci_dev *dev, int pos, int enable) +static void msi_set_enable(struct pci_dev *dev, int pos, int enable) { u16 control; - if (pos) { - pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); - control &= ~PCI_MSI_FLAGS_ENABLE; - if (enable) - control |= PCI_MSI_FLAGS_ENABLE; - pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); - } -} + BUG_ON(!pos); -static void msi_set_enable(struct pci_dev *dev, int enable) -{ - __msi_set_enable(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), enable); + pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); + control &= ~PCI_MSI_FLAGS_ENABLE; + if (enable) + control |= PCI_MSI_FLAGS_ENABLE; + pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); } static void msix_set_enable(struct pci_dev *dev, int enable) @@ -131,9 +126,6 @@ static inline __attribute_const__ u32 msi_enabled_mask(u16 control) * mask all MSI interrupts by clearing the MSI enable bit does not work * reliably as devices without an INTx disable bit will then generate a * level IRQ which will never be cleared. - * - * Returns 1 if it succeeded in masking the interrupt and 0 if the device - * doesn't support MSI masking. */ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) { @@ -303,7 +295,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev) pos = entry->msi_attrib.pos; pci_intx_for_msi(dev, 0); - msi_set_enable(dev, 0); + msi_set_enable(dev, pos, 0); write_msi_msg(dev->irq, &entry->msg); pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); @@ -321,22 +313,22 @@ static void __pci_restore_msix_state(struct pci_dev *dev) if (!dev->msix_enabled) return; + BUG_ON(list_empty(&dev->msi_list)); + entry = list_entry(dev->msi_list.next, struct msi_desc, list); + pos = entry->msi_attrib.pos; + pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); /* route the table */ pci_intx_for_msi(dev, 0); - msix_set_enable(dev, 0); + control |= PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL; + pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); list_for_each_entry(entry, &dev->msi_list, list) { write_msi_msg(entry->irq, &entry->msg); msix_mask_irq(entry, entry->masked); } - BUG_ON(list_empty(&dev->msi_list)); - entry = list_entry(dev->msi_list.next, struct msi_desc, list); - pos = entry->msi_attrib.pos; - pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); control &= ~PCI_MSIX_FLAGS_MASKALL; - control |= PCI_MSIX_FLAGS_ENABLE; pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); } @@ -365,9 +357,9 @@ static int msi_capability_init(struct pci_dev *dev, int nvec) u16 control; unsigned mask; - msi_set_enable(dev, 0); /* Ensure msi is disabled as I set it up */ - pos = pci_find_capability(dev, PCI_CAP_ID_MSI); + msi_set_enable(dev, pos, 0); /* Disable MSI during set up */ + pci_read_config_word(dev, msi_control_reg(pos), &control); /* MSI Entry Initialization */ entry = alloc_msi_entry(dev); @@ -381,7 +373,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec) entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ entry->msi_attrib.pos = pos; - entry->mask_pos = msi_mask_bits_reg(pos, entry->msi_attrib.is_64); + entry->mask_pos = msi_mask_reg(pos, entry->msi_attrib.is_64); /* All MSIs are unmasked by default, Mask them all */ if (entry->msi_attrib.maskbit) pci_read_config_dword(dev, entry->mask_pos, &entry->masked); @@ -399,7 +391,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec) /* Set MSI enabled bits */ pci_intx_for_msi(dev, 0); - msi_set_enable(dev, 1); + msi_set_enable(dev, pos, 1); dev->msi_enabled = 1; dev->irq = entry->irq; @@ -427,11 +419,14 @@ static int msix_capability_init(struct pci_dev *dev, u8 bir; void __iomem *base; - msix_set_enable(dev, 0);/* Ensure msix is disabled as I set it up */ - pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); + pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); + + /* Ensure MSI-X is disabled while it is set up */ + control &= ~PCI_MSIX_FLAGS_ENABLE; + pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); + /* Request & Map MSI-X table region */ - pci_read_config_word(dev, msi_control_reg(pos), &control); nr_entries = multi_msix_capable(control); pci_read_config_dword(dev, msix_table_offset_reg(pos), &table_offset); @@ -442,7 +437,6 @@ static int msix_capability_init(struct pci_dev *dev, if (base == NULL) return -ENOMEM; - /* MSI-X Table Initialization */ for (i = 0; i < nvec; i++) { entry = alloc_msi_entry(dev); if (!entry) @@ -455,7 +449,6 @@ static int msix_capability_init(struct pci_dev *dev, entry->msi_attrib.default_irq = dev->irq; entry->msi_attrib.pos = pos; entry->mask_base = base; - msix_mask_irq(entry, 1); list_add_tail(&entry->list, &dev->msi_list); } @@ -480,22 +473,31 @@ static int msix_capability_init(struct pci_dev *dev, return ret; } + /* + * Some devices require MSI-X to be enabled before we can touch the + * MSI-X registers. We need to mask all the vectors to prevent + * interrupts coming in before they're fully set up. + */ + control |= PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE; + pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); + i = 0; list_for_each_entry(entry, &dev->msi_list, list) { entries[i].vector = entry->irq; set_irq_msi(entry->irq, entry); + j = entries[i].entry; + entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE + + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); + msix_mask_irq(entry, 1); i++; } - /* Set MSI-X enabled bits */ + + /* Set MSI-X enabled bits and unmask the function */ pci_intx_for_msi(dev, 0); - msix_set_enable(dev, 1); dev->msix_enabled = 1; - list_for_each_entry(entry, &dev->msi_list, list) { - int vector = entry->msi_attrib.entry_nr; - entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); - } + control &= ~PCI_MSIX_FLAGS_MASKALL; + pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); return 0; } @@ -596,17 +598,20 @@ void pci_msi_shutdown(struct pci_dev *dev) struct msi_desc *desc; u32 mask; u16 ctrl; + unsigned pos; if (!pci_msi_enable || !dev || !dev->msi_enabled) return; - msi_set_enable(dev, 0); + BUG_ON(list_empty(&dev->msi_list)); + desc = list_first_entry(&dev->msi_list, struct msi_desc, list); + pos = desc->msi_attrib.pos; + + msi_set_enable(dev, pos, 0); pci_intx_for_msi(dev, 1); dev->msi_enabled = 0; - BUG_ON(list_empty(&dev->msi_list)); - desc = list_first_entry(&dev->msi_list, struct msi_desc, list); - pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &ctrl); + pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl); mask = msi_capable_mask(ctrl); msi_mask_irq(desc, mask, ~mask); @@ -648,10 +653,7 @@ static int msi_free_irqs(struct pci_dev* dev) list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) { if (entry->msi_attrib.is_msix) { - writel(1, entry->mask_base + entry->msi_attrib.entry_nr - * PCI_MSIX_ENTRY_SIZE - + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); - + msix_mask_irq(entry, 1); if (list_is_last(&entry->list, &dev->msi_list)) iounmap(entry->mask_base); } @@ -691,8 +693,8 @@ int pci_msix_table_size(struct pci_dev *dev) * indicates the successful configuration of MSI-X capability structure * with new allocated MSI-X irqs. A return of < 0 indicates a failure. * Or a return of > 0 indicates that driver request is exceeding the number - * of irqs available. Driver should use the returned value to re-send - * its request. + * of irqs or MSI-X vectors available. Driver should use the returned value to + * re-send its request. **/ int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) { @@ -708,7 +710,7 @@ int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) nr_entries = pci_msix_table_size(dev); if (nvec > nr_entries) - return -EINVAL; + return nr_entries; /* Check for any invalid entries */ for (i = 0; i < nvec; i++) { diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index 71f4df2ef654..a0662842550b 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -16,21 +16,15 @@ #define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO) #define msi_upper_address_reg(base) (base + PCI_MSI_ADDRESS_HI) #define msi_data_reg(base, is64bit) \ - ( (is64bit == 1) ? base+PCI_MSI_DATA_64 : base+PCI_MSI_DATA_32 ) -#define msi_mask_bits_reg(base, is64bit) \ - ( (is64bit == 1) ? base+PCI_MSI_MASK_BIT : base+PCI_MSI_MASK_BIT-4) -#define msi_disable(control) control &= ~PCI_MSI_FLAGS_ENABLE + (base + ((is64bit == 1) ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32)) +#define msi_mask_reg(base, is64bit) \ + (base + ((is64bit == 1) ? PCI_MSI_MASK_64 : PCI_MSI_MASK_32)) #define is_64bit_address(control) (!!(control & PCI_MSI_FLAGS_64BIT)) #define is_mask_bit_support(control) (!!(control & PCI_MSI_FLAGS_MASKBIT)) #define msix_table_offset_reg(base) (base + 0x04) #define msix_pba_offset_reg(base) (base + 0x08) -#define msix_enable(control) control |= PCI_MSIX_FLAGS_ENABLE -#define msix_disable(control) control &= ~PCI_MSIX_FLAGS_ENABLE #define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1) -#define multi_msix_capable msix_table_size -#define msix_unmask(address) (address & ~PCI_MSIX_FLAGS_BITMASK) -#define msix_mask(address) (address | PCI_MSIX_FLAGS_BITMASK) -#define msix_is_pending(address) (address & PCI_MSIX_FLAGS_PENDMASK) +#define multi_msix_capable(control) msix_table_size((control)) #endif /* MSI_H */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 07bbb9b3b93f..6c93af5ced18 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -485,6 +485,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) pmcsr &= ~PCI_PM_CTRL_STATE_MASK; pmcsr |= state; break; + case PCI_D3hot: + case PCI_D3cold: case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) @@ -1208,7 +1210,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable) * Error code depending on the platform is returned if both the platform and * the native mechanism fail to enable the generation of wake-up events */ -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) +int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) { int error = 0; bool pme_done = false; @@ -1287,15 +1289,14 @@ pci_power_t pci_target_state(struct pci_dev *dev) default: target_state = state; } + } else if (!dev->pm_cap) { + target_state = PCI_D0; } else if (device_may_wakeup(&dev->dev)) { /* * Find the deepest state from which the device can generate * wake-up events, make it the target state and enable device * to generate PME#. */ - if (!dev->pm_cap) - return PCI_POWER_ERROR; - if (dev->pme_support) { while (target_state && !(dev->pme_support & (1 << target_state))) @@ -1532,7 +1533,7 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge) if (!pin) return -1; - while (dev->bus->parent) { + while (!pci_is_root_bus(dev->bus)) { pin = pci_swizzle_interrupt_pin(dev, pin); dev = dev->bus->self; } @@ -1552,7 +1553,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp) { u8 pin = *pinp; - while (dev->bus->parent) { + while (!pci_is_root_bus(dev->bus)) { pin = pci_swizzle_interrupt_pin(dev, pin); dev = dev->bus->self; } @@ -2058,111 +2059,177 @@ int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask) EXPORT_SYMBOL(pci_set_dma_seg_boundary); #endif -static int __pcie_flr(struct pci_dev *dev, int probe) +static int pcie_flr(struct pci_dev *dev, int probe) { - u16 status; + int i; + int pos; u32 cap; - int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP); + u16 status; - if (!exppos) + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!pos) return -ENOTTY; - pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap); + + pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap); if (!(cap & PCI_EXP_DEVCAP_FLR)) return -ENOTTY; if (probe) return 0; - pci_block_user_cfg_access(dev); - /* Wait for Transaction Pending bit clean */ - pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); - if (!(status & PCI_EXP_DEVSTA_TRPND)) - goto transaction_done; + for (i = 0; i < 4; i++) { + if (i) + msleep((1 << (i - 1)) * 100); - msleep(100); - pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); - if (!(status & PCI_EXP_DEVSTA_TRPND)) - goto transaction_done; - - dev_info(&dev->dev, "Busy after 100ms while trying to reset; " - "sleeping for 1 second\n"); - ssleep(1); - pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); - if (status & PCI_EXP_DEVSTA_TRPND) - dev_info(&dev->dev, "Still busy after 1s; " - "proceeding with reset anyway\n"); - -transaction_done: - pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL, + pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status); + if (!(status & PCI_EXP_DEVSTA_TRPND)) + goto clear; + } + + dev_err(&dev->dev, "transaction is not cleared; " + "proceeding with reset anyway\n"); + +clear: + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); - mdelay(100); + msleep(100); - pci_unblock_user_cfg_access(dev); return 0; } -static int __pci_af_flr(struct pci_dev *dev, int probe) +static int pci_af_flr(struct pci_dev *dev, int probe) { - int cappos = pci_find_capability(dev, PCI_CAP_ID_AF); - u8 status; + int i; + int pos; u8 cap; + u8 status; - if (!cappos) + pos = pci_find_capability(dev, PCI_CAP_ID_AF); + if (!pos) return -ENOTTY; - pci_read_config_byte(dev, cappos + PCI_AF_CAP, &cap); + + pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap); if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR)) return -ENOTTY; if (probe) return 0; - pci_block_user_cfg_access(dev); - /* Wait for Transaction Pending bit clean */ - pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status); - if (!(status & PCI_AF_STATUS_TP)) - goto transaction_done; + for (i = 0; i < 4; i++) { + if (i) + msleep((1 << (i - 1)) * 100); + + pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status); + if (!(status & PCI_AF_STATUS_TP)) + goto clear; + } + dev_err(&dev->dev, "transaction is not cleared; " + "proceeding with reset anyway\n"); + +clear: + pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR); msleep(100); - pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status); - if (!(status & PCI_AF_STATUS_TP)) - goto transaction_done; - - dev_info(&dev->dev, "Busy after 100ms while trying to" - " reset; sleeping for 1 second\n"); - ssleep(1); - pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status); - if (status & PCI_AF_STATUS_TP) - dev_info(&dev->dev, "Still busy after 1s; " - "proceeding with reset anyway\n"); - -transaction_done: - pci_write_config_byte(dev, cappos + PCI_AF_CTRL, PCI_AF_CTRL_FLR); - mdelay(100); - - pci_unblock_user_cfg_access(dev); + return 0; } -static int __pci_reset_function(struct pci_dev *pdev, int probe) +static int pci_pm_reset(struct pci_dev *dev, int probe) { - int res; + u16 csr; + + if (!dev->pm_cap) + return -ENOTTY; - res = __pcie_flr(pdev, probe); - if (res != -ENOTTY) - return res; + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr); + if (csr & PCI_PM_CTRL_NO_SOFT_RESET) + return -ENOTTY; - res = __pci_af_flr(pdev, probe); - if (res != -ENOTTY) - return res; + if (probe) + return 0; - return res; + if (dev->current_state != PCI_D0) + return -EINVAL; + + csr &= ~PCI_PM_CTRL_STATE_MASK; + csr |= PCI_D3hot; + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); + msleep(pci_pm_d3_delay); + + csr &= ~PCI_PM_CTRL_STATE_MASK; + csr |= PCI_D0; + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); + msleep(pci_pm_d3_delay); + + return 0; +} + +static int pci_parent_bus_reset(struct pci_dev *dev, int probe) +{ + u16 ctrl; + struct pci_dev *pdev; + + if (dev->subordinate) + return -ENOTTY; + + list_for_each_entry(pdev, &dev->bus->devices, bus_list) + if (pdev != dev) + return -ENOTTY; + + if (probe) + return 0; + + pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl); + ctrl |= PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl); + msleep(100); + + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl); + msleep(100); + + return 0; +} + +static int pci_dev_reset(struct pci_dev *dev, int probe) +{ + int rc; + + might_sleep(); + + if (!probe) { + pci_block_user_cfg_access(dev); + /* block PM suspend, driver probe, etc. */ + down(&dev->dev.sem); + } + + rc = pcie_flr(dev, probe); + if (rc != -ENOTTY) + goto done; + + rc = pci_af_flr(dev, probe); + if (rc != -ENOTTY) + goto done; + + rc = pci_pm_reset(dev, probe); + if (rc != -ENOTTY) + goto done; + + rc = pci_parent_bus_reset(dev, probe); +done: + if (!probe) { + up(&dev->dev.sem); + pci_unblock_user_cfg_access(dev); + } + + return rc; } /** - * pci_execute_reset_function() - Reset a PCI device function - * @dev: Device function to reset + * __pci_reset_function - reset a PCI device function + * @dev: PCI device to reset * * Some devices allow an individual function to be reset without affecting * other functions in the same device. The PCI device must be responsive @@ -2174,18 +2241,18 @@ static int __pci_reset_function(struct pci_dev *pdev, int probe) * device including MSI, bus mastering, BARs, decoding IO and memory spaces, * etc. * - * Returns 0 if the device function was successfully reset or -ENOTTY if the + * Returns 0 if the device function was successfully reset or negative if the * device doesn't support resetting a single function. */ -int pci_execute_reset_function(struct pci_dev *dev) +int __pci_reset_function(struct pci_dev *dev) { - return __pci_reset_function(dev, 0); + return pci_dev_reset(dev, 0); } -EXPORT_SYMBOL_GPL(pci_execute_reset_function); +EXPORT_SYMBOL_GPL(__pci_reset_function); /** - * pci_reset_function() - quiesce and reset a PCI device function - * @dev: Device function to reset + * pci_reset_function - quiesce and reset a PCI device function + * @dev: PCI device to reset * * Some devices allow an individual function to be reset without affecting * other functions in the same device. The PCI device must be responsive @@ -2193,32 +2260,33 @@ EXPORT_SYMBOL_GPL(pci_execute_reset_function); * * This function does not just reset the PCI portion of a device, but * clears all the state associated with the device. This function differs - * from pci_execute_reset_function in that it saves and restores device state + * from __pci_reset_function in that it saves and restores device state * over the reset. * - * Returns 0 if the device function was successfully reset or -ENOTTY if the + * Returns 0 if the device function was successfully reset or negative if the * device doesn't support resetting a single function. */ int pci_reset_function(struct pci_dev *dev) { - int r = __pci_reset_function(dev, 1); + int rc; - if (r < 0) - return r; + rc = pci_dev_reset(dev, 1); + if (rc) + return rc; - if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0) - disable_irq(dev->irq); pci_save_state(dev); + /* + * both INTx and MSI are disabled after the Interrupt Disable bit + * is set and the Bus Master bit is cleared. + */ pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE); - r = pci_execute_reset_function(dev); + rc = pci_dev_reset(dev, 0); pci_restore_state(dev); - if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0) - enable_irq(dev->irq); - return r; + return rc; } EXPORT_SYMBOL_GPL(pci_reset_function); @@ -2591,6 +2659,8 @@ static int __init pci_setup(char *str) } else if (!strncmp(str, "resource_alignment=", 19)) { pci_set_resource_alignment_param(str + 19, strlen(str + 19)); + } else if (!strncmp(str, "ecrc=", 5)) { + pcie_ecrc_get_policy(str + 5); } else { printk(KERN_ERR "PCI: Unknown option `%s'\n", str); diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig index c3bde588aa13..50e94e02378a 100644 --- a/drivers/pci/pcie/aer/Kconfig +++ b/drivers/pci/pcie/aer/Kconfig @@ -10,3 +10,18 @@ config PCIEAER This enables PCI Express Root Port Advanced Error Reporting (AER) driver support. Error reporting messages sent to Root Port will be handled by PCI Express AER driver. + + +# +# PCI Express ECRC +# +config PCIE_ECRC + bool "PCI Express ECRC settings control" + depends on PCIEAER + help + Used to override firmware/bios settings for PCI Express ECRC + (transaction layer end-to-end CRC checking). + + When in doubt, say N. + +source "drivers/pci/pcie/aer/Kconfig.debug" diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug new file mode 100644 index 000000000000..b8c925c1f6aa --- /dev/null +++ b/drivers/pci/pcie/aer/Kconfig.debug @@ -0,0 +1,18 @@ +# +# PCI Express Root Port Device AER Debug Configuration +# + +config PCIEAER_INJECT + tristate "PCIE AER error injector support" + depends on PCIEAER + default n + help + This enables PCI Express Root Port Advanced Error Reporting + (AER) software error injector. + + Debuging PCIE AER code is quite difficult because it is hard + to trigger various real hardware errors. Software based + error injection can fake almost all kinds of errors with the + help of a user space helper tool aer-inject, which can be + gotten from: + http://www.kernel.org/pub/linux/utils/pci/aer-inject/ diff --git a/drivers/pci/pcie/aer/Makefile b/drivers/pci/pcie/aer/Makefile index 8da3bd8455a8..2cba67510dc8 100644 --- a/drivers/pci/pcie/aer/Makefile +++ b/drivers/pci/pcie/aer/Makefile @@ -4,6 +4,9 @@ obj-$(CONFIG_PCIEAER) += aerdriver.o +obj-$(CONFIG_PCIE_ECRC) += ecrc.o + aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o aerdriver-$(CONFIG_ACPI) += aerdrv_acpi.o +obj-$(CONFIG_PCIEAER_INJECT) += aer_inject.o diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c new file mode 100644 index 000000000000..d92ae21a59d8 --- /dev/null +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -0,0 +1,473 @@ +/* + * PCIE AER software error injection support. + * + * Debuging PCIE AER code is quite difficult because it is hard to + * trigger various real hardware errors. Software based error + * injection can fake almost all kinds of errors with the help of a + * user space helper tool aer-inject, which can be gotten from: + * http://www.kernel.org/pub/linux/utils/pci/aer-inject/ + * + * Copyright 2009 Intel Corporation. + * Huang Ying <ying.huang@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/miscdevice.h> +#include <linux/pci.h> +#include <linux/fs.h> +#include <asm/uaccess.h> +#include "aerdrv.h" + +struct aer_error_inj +{ + u8 bus; + u8 dev; + u8 fn; + u32 uncor_status; + u32 cor_status; + u32 header_log0; + u32 header_log1; + u32 header_log2; + u32 header_log3; +}; + +struct aer_error +{ + struct list_head list; + unsigned int bus; + unsigned int devfn; + int pos_cap_err; + + u32 uncor_status; + u32 cor_status; + u32 header_log0; + u32 header_log1; + u32 header_log2; + u32 header_log3; + u32 root_status; + u32 source_id; +}; + +struct pci_bus_ops +{ + struct list_head list; + struct pci_bus *bus; + struct pci_ops *ops; +}; + +static LIST_HEAD(einjected); + +static LIST_HEAD(pci_bus_ops_list); + +/* Protect einjected and pci_bus_ops_list */ +static DEFINE_SPINLOCK(inject_lock); + +static void aer_error_init(struct aer_error *err, unsigned int bus, + unsigned int devfn, int pos_cap_err) +{ + INIT_LIST_HEAD(&err->list); + err->bus = bus; + err->devfn = devfn; + err->pos_cap_err = pos_cap_err; +} + +/* inject_lock must be held before calling */ +static struct aer_error *__find_aer_error(unsigned int bus, unsigned int devfn) +{ + struct aer_error *err; + + list_for_each_entry(err, &einjected, list) { + if (bus == err->bus && devfn == err->devfn) + return err; + } + return NULL; +} + +/* inject_lock must be held before calling */ +static struct aer_error *__find_aer_error_by_dev(struct pci_dev *dev) +{ + return __find_aer_error(dev->bus->number, dev->devfn); +} + +/* inject_lock must be held before calling */ +static struct pci_ops *__find_pci_bus_ops(struct pci_bus *bus) +{ + struct pci_bus_ops *bus_ops; + + list_for_each_entry(bus_ops, &pci_bus_ops_list, list) { + if (bus_ops->bus == bus) + return bus_ops->ops; + } + return NULL; +} + +static struct pci_bus_ops *pci_bus_ops_pop(void) +{ + unsigned long flags; + struct pci_bus_ops *bus_ops = NULL; + + spin_lock_irqsave(&inject_lock, flags); + if (list_empty(&pci_bus_ops_list)) + bus_ops = NULL; + else { + struct list_head *lh = pci_bus_ops_list.next; + list_del(lh); + bus_ops = list_entry(lh, struct pci_bus_ops, list); + } + spin_unlock_irqrestore(&inject_lock, flags); + return bus_ops; +} + +static u32 *find_pci_config_dword(struct aer_error *err, int where, + int *prw1cs) +{ + int rw1cs = 0; + u32 *target = NULL; + + if (err->pos_cap_err == -1) + return NULL; + + switch (where - err->pos_cap_err) { + case PCI_ERR_UNCOR_STATUS: + target = &err->uncor_status; + rw1cs = 1; + break; + case PCI_ERR_COR_STATUS: + target = &err->cor_status; + rw1cs = 1; + break; + case PCI_ERR_HEADER_LOG: + target = &err->header_log0; + break; + case PCI_ERR_HEADER_LOG+4: + target = &err->header_log1; + break; + case PCI_ERR_HEADER_LOG+8: + target = &err->header_log2; + break; + case PCI_ERR_HEADER_LOG+12: + target = &err->header_log3; + break; + case PCI_ERR_ROOT_STATUS: + target = &err->root_status; + rw1cs = 1; + break; + case PCI_ERR_ROOT_COR_SRC: + target = &err->source_id; + break; + } + if (prw1cs) + *prw1cs = rw1cs; + return target; +} + +static int pci_read_aer(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + u32 *sim; + struct aer_error *err; + unsigned long flags; + struct pci_ops *ops; + + spin_lock_irqsave(&inject_lock, flags); + if (size != sizeof(u32)) + goto out; + err = __find_aer_error(bus->number, devfn); + if (!err) + goto out; + + sim = find_pci_config_dword(err, where, NULL); + if (sim) { + *val = *sim; + spin_unlock_irqrestore(&inject_lock, flags); + return 0; + } +out: + ops = __find_pci_bus_ops(bus); + spin_unlock_irqrestore(&inject_lock, flags); + return ops->read(bus, devfn, where, size, val); +} + +int pci_write_aer(struct pci_bus *bus, unsigned int devfn, int where, int size, + u32 val) +{ + u32 *sim; + struct aer_error *err; + unsigned long flags; + int rw1cs; + struct pci_ops *ops; + + spin_lock_irqsave(&inject_lock, flags); + if (size != sizeof(u32)) + goto out; + err = __find_aer_error(bus->number, devfn); + if (!err) + goto out; + + sim = find_pci_config_dword(err, where, &rw1cs); + if (sim) { + if (rw1cs) + *sim ^= val; + else + *sim = val; + spin_unlock_irqrestore(&inject_lock, flags); + return 0; + } +out: + ops = __find_pci_bus_ops(bus); + spin_unlock_irqrestore(&inject_lock, flags); + return ops->write(bus, devfn, where, size, val); +} + +static struct pci_ops pci_ops_aer = { + .read = pci_read_aer, + .write = pci_write_aer, +}; + +static void pci_bus_ops_init(struct pci_bus_ops *bus_ops, + struct pci_bus *bus, + struct pci_ops *ops) +{ + INIT_LIST_HEAD(&bus_ops->list); + bus_ops->bus = bus; + bus_ops->ops = ops; +} + +static int pci_bus_set_aer_ops(struct pci_bus *bus) +{ + struct pci_ops *ops; + struct pci_bus_ops *bus_ops; + unsigned long flags; + + bus_ops = kmalloc(sizeof(*bus_ops), GFP_KERNEL); + if (!bus_ops) + return -ENOMEM; + ops = pci_bus_set_ops(bus, &pci_ops_aer); + spin_lock_irqsave(&inject_lock, flags); + if (ops == &pci_ops_aer) + goto out; + pci_bus_ops_init(bus_ops, bus, ops); + list_add(&bus_ops->list, &pci_bus_ops_list); + bus_ops = NULL; +out: + spin_unlock_irqrestore(&inject_lock, flags); + if (bus_ops) + kfree(bus_ops); + return 0; +} + +static struct pci_dev *pcie_find_root_port(struct pci_dev *dev) +{ + while (1) { + if (!dev->is_pcie) + break; + if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) + return dev; + if (!dev->bus->self) + break; + dev = dev->bus->self; + } + return NULL; +} + +static int find_aer_device_iter(struct device *device, void *data) +{ + struct pcie_device **result = data; + struct pcie_device *pcie_dev; + + if (device->bus == &pcie_port_bus_type) { + pcie_dev = to_pcie_device(device); + if (pcie_dev->service & PCIE_PORT_SERVICE_AER) { + *result = pcie_dev; + return 1; + } + } + return 0; +} + +static int find_aer_device(struct pci_dev *dev, struct pcie_device **result) +{ + return device_for_each_child(&dev->dev, result, find_aer_device_iter); +} + +static int aer_inject(struct aer_error_inj *einj) +{ + struct aer_error *err, *rperr; + struct aer_error *err_alloc = NULL, *rperr_alloc = NULL; + struct pci_dev *dev, *rpdev; + struct pcie_device *edev; + unsigned long flags; + unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn); + int pos_cap_err, rp_pos_cap_err; + u32 sever; + int ret = 0; + + dev = pci_get_bus_and_slot(einj->bus, devfn); + if (!dev) + return -EINVAL; + rpdev = pcie_find_root_port(dev); + if (!rpdev) { + ret = -EINVAL; + goto out_put; + } + + pos_cap_err = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (!pos_cap_err) { + ret = -EIO; + goto out_put; + } + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever); + + rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR); + if (!rp_pos_cap_err) { + ret = -EIO; + goto out_put; + } + + err_alloc = kzalloc(sizeof(struct aer_error), GFP_KERNEL); + if (!err_alloc) { + ret = -ENOMEM; + goto out_put; + } + rperr_alloc = kzalloc(sizeof(struct aer_error), GFP_KERNEL); + if (!rperr_alloc) { + ret = -ENOMEM; + goto out_put; + } + + spin_lock_irqsave(&inject_lock, flags); + + err = __find_aer_error_by_dev(dev); + if (!err) { + err = err_alloc; + err_alloc = NULL; + aer_error_init(err, einj->bus, devfn, pos_cap_err); + list_add(&err->list, &einjected); + } + err->uncor_status |= einj->uncor_status; + err->cor_status |= einj->cor_status; + err->header_log0 = einj->header_log0; + err->header_log1 = einj->header_log1; + err->header_log2 = einj->header_log2; + err->header_log3 = einj->header_log3; + + rperr = __find_aer_error_by_dev(rpdev); + if (!rperr) { + rperr = rperr_alloc; + rperr_alloc = NULL; + aer_error_init(rperr, rpdev->bus->number, rpdev->devfn, + rp_pos_cap_err); + list_add(&rperr->list, &einjected); + } + if (einj->cor_status) { + if (rperr->root_status & PCI_ERR_ROOT_COR_RCV) + rperr->root_status |= PCI_ERR_ROOT_MULTI_COR_RCV; + else + rperr->root_status |= PCI_ERR_ROOT_COR_RCV; + rperr->source_id &= 0xffff0000; + rperr->source_id |= (einj->bus << 8) | devfn; + } + if (einj->uncor_status) { + if (rperr->root_status & PCI_ERR_ROOT_UNCOR_RCV) + rperr->root_status |= PCI_ERR_ROOT_MULTI_UNCOR_RCV; + if (sever & einj->uncor_status) { + rperr->root_status |= PCI_ERR_ROOT_FATAL_RCV; + if (!(rperr->root_status & PCI_ERR_ROOT_UNCOR_RCV)) + rperr->root_status |= PCI_ERR_ROOT_FIRST_FATAL; + } else + rperr->root_status |= PCI_ERR_ROOT_NONFATAL_RCV; + rperr->root_status |= PCI_ERR_ROOT_UNCOR_RCV; + rperr->source_id &= 0x0000ffff; + rperr->source_id |= ((einj->bus << 8) | devfn) << 16; + } + spin_unlock_irqrestore(&inject_lock, flags); + + ret = pci_bus_set_aer_ops(dev->bus); + if (ret) + goto out_put; + ret = pci_bus_set_aer_ops(rpdev->bus); + if (ret) + goto out_put; + + if (find_aer_device(rpdev, &edev)) + aer_irq(-1, edev); + else + ret = -EINVAL; +out_put: + if (err_alloc) + kfree(err_alloc); + if (rperr_alloc) + kfree(rperr_alloc); + pci_dev_put(dev); + return ret; +} + +static ssize_t aer_inject_write(struct file *filp, const char __user *ubuf, + size_t usize, loff_t *off) +{ + struct aer_error_inj einj; + int ret; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (usize != sizeof(struct aer_error_inj)) + return -EINVAL; + + if (copy_from_user(&einj, ubuf, usize)) + return -EFAULT; + + ret = aer_inject(&einj); + return ret ? ret : usize; +} + +static const struct file_operations aer_inject_fops = { + .write = aer_inject_write, + .owner = THIS_MODULE, +}; + +static struct miscdevice aer_inject_device = { + .minor = MISC_DYNAMIC_MINOR, + .name = "aer_inject", + .fops = &aer_inject_fops, +}; + +static int __init aer_inject_init(void) +{ + return misc_register(&aer_inject_device); +} + +static void __exit aer_inject_exit(void) +{ + struct aer_error *err, *err_next; + unsigned long flags; + struct pci_bus_ops *bus_ops; + + misc_deregister(&aer_inject_device); + + while ((bus_ops = pci_bus_ops_pop())) { + pci_bus_set_ops(bus_ops->bus, bus_ops->ops); + kfree(bus_ops); + } + + spin_lock_irqsave(&inject_lock, flags); + list_for_each_entry_safe(err, err_next, + &pci_bus_ops_list, list) { + list_del(&err->list); + kfree(err); + } + spin_unlock_irqrestore(&inject_lock, flags); +} + +module_init(aer_inject_init); +module_exit(aer_inject_exit); + +MODULE_DESCRIPTION("PCIE AER software error injector"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 32ade5af927e..4770f13b3ca1 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -77,7 +77,7 @@ void pci_no_aer(void) * * Invoked when Root Port detects AER messages. **/ -static irqreturn_t aer_irq(int irq, void *context) +irqreturn_t aer_irq(int irq, void *context) { unsigned int status, id; struct pcie_device *pdev = (struct pcie_device *)context; @@ -126,6 +126,7 @@ static irqreturn_t aer_irq(int irq, void *context) return IRQ_HANDLED; } +EXPORT_SYMBOL_GPL(aer_irq); /** * aer_alloc_rpc - allocate Root Port data structure diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index aa14482a4779..bbd7428ca2d0 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -11,6 +11,7 @@ #include <linux/workqueue.h> #include <linux/pcieport_if.h> #include <linux/aer.h> +#include <linux/interrupt.h> #define AER_NONFATAL 0 #define AER_FATAL 1 @@ -56,7 +57,11 @@ struct header_log_regs { unsigned int dw3; }; +#define AER_MAX_MULTI_ERR_DEVICES 5 /* Not likely to have more */ struct aer_err_info { + struct pci_dev *dev[AER_MAX_MULTI_ERR_DEVICES]; + int error_dev_num; + u16 id; int severity; /* 0:NONFATAL | 1:FATAL | 2:COR */ int flags; unsigned int status; /* COR/UNCOR Error Status */ @@ -120,6 +125,7 @@ extern void aer_delete_rootport(struct aer_rpc *rpc); extern int aer_init(struct pcie_device *dev); extern void aer_isr(struct work_struct *work); extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info); +extern irqreturn_t aer_irq(int irq, void *context); #ifdef CONFIG_ACPI extern int aer_osc_setup(struct pcie_device *pciedev); diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 307452f30035..3d8872704a58 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -26,7 +26,9 @@ #include "aerdrv.h" static int forceload; +static int nosourceid; module_param(forceload, bool, 0); +module_param(nosourceid, bool, 0); int pci_enable_pcie_error_reporting(struct pci_dev *dev) { @@ -109,19 +111,23 @@ int pci_cleanup_aer_correct_error_status(struct pci_dev *dev) #endif /* 0 */ -static void set_device_error_reporting(struct pci_dev *dev, void *data) +static int set_device_error_reporting(struct pci_dev *dev, void *data) { bool enable = *((bool *)data); - if (dev->pcie_type != PCIE_RC_PORT && - dev->pcie_type != PCIE_SW_UPSTREAM_PORT && - dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT) - return; + if (dev->pcie_type == PCIE_RC_PORT || + dev->pcie_type == PCIE_SW_UPSTREAM_PORT || + dev->pcie_type == PCIE_SW_DOWNSTREAM_PORT) { + if (enable) + pci_enable_pcie_error_reporting(dev); + else + pci_disable_pcie_error_reporting(dev); + } if (enable) - pci_enable_pcie_error_reporting(dev); - else - pci_disable_pcie_error_reporting(dev); + pcie_set_ecrc_checking(dev); + + return 0; } /** @@ -139,73 +145,148 @@ static void set_downstream_devices_error_reporting(struct pci_dev *dev, pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable); } -static int find_device_iter(struct device *device, void *data) +static inline int compare_device_id(struct pci_dev *dev, + struct aer_err_info *e_info) { - struct pci_dev *dev; - u16 id = *(unsigned long *)data; - u8 secondary, subordinate, d_bus = id >> 8; + if (e_info->id == ((dev->bus->number << 8) | dev->devfn)) { + /* + * Device ID match + */ + return 1; + } - if (device->bus == &pci_bus_type) { - dev = to_pci_dev(device); - if (id == ((dev->bus->number << 8) | dev->devfn)) { - /* - * Device ID match - */ - *(unsigned long*)data = (unsigned long)device; - return 1; - } + return 0; +} + +static int add_error_device(struct aer_err_info *e_info, struct pci_dev *dev) +{ + if (e_info->error_dev_num < AER_MAX_MULTI_ERR_DEVICES) { + e_info->dev[e_info->error_dev_num] = dev; + e_info->error_dev_num++; + return 1; + } else + return 0; +} + + +#define PCI_BUS(x) (((x) >> 8) & 0xff) + +static int find_device_iter(struct pci_dev *dev, void *data) +{ + int pos; + u32 status; + u32 mask; + u16 reg16; + int result; + struct aer_err_info *e_info = (struct aer_err_info *)data; + + /* + * When bus id is equal to 0, it might be a bad id + * reported by root port. + */ + if (!nosourceid && (PCI_BUS(e_info->id) != 0)) { + result = compare_device_id(dev, e_info); + if (result) + add_error_device(e_info, dev); /* - * If device is P2P, check if it is an upstream? + * If there is no multiple error, we stop + * or continue based on the id comparing. */ - if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE) { - pci_read_config_byte(dev, PCI_SECONDARY_BUS, - &secondary); - pci_read_config_byte(dev, PCI_SUBORDINATE_BUS, - &subordinate); - if (d_bus >= secondary && d_bus <= subordinate) { - *(unsigned long*)data = (unsigned long)device; - return 1; - } + if (!(e_info->flags & AER_MULTI_ERROR_VALID_FLAG)) + return result; + + /* + * If there are multiple errors and id does match, + * We need continue to search other devices under + * the root port. Return 0 means that. + */ + if (result) + return 0; + } + + /* + * When either + * 1) nosourceid==y; + * 2) bus id is equal to 0. Some ports might lose the bus + * id of error source id; + * 3) There are multiple errors and prior id comparing fails; + * We check AER status registers to find the initial reporter. + */ + if (atomic_read(&dev->enable_cnt) == 0) + return 0; + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!pos) + return 0; + /* Check if AER is enabled */ + pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, ®16); + if (!(reg16 & ( + PCI_EXP_DEVCTL_CERE | + PCI_EXP_DEVCTL_NFERE | + PCI_EXP_DEVCTL_FERE | + PCI_EXP_DEVCTL_URRE))) + return 0; + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (!pos) + return 0; + + status = 0; + mask = 0; + if (e_info->severity == AER_CORRECTABLE) { + pci_read_config_dword(dev, + pos + PCI_ERR_COR_STATUS, + &status); + pci_read_config_dword(dev, + pos + PCI_ERR_COR_MASK, + &mask); + if (status & ERR_CORRECTABLE_ERROR_MASK & ~mask) { + add_error_device(e_info, dev); + goto added; + } + } else { + pci_read_config_dword(dev, + pos + PCI_ERR_UNCOR_STATUS, + &status); + pci_read_config_dword(dev, + pos + PCI_ERR_UNCOR_MASK, + &mask); + if (status & ERR_UNCORRECTABLE_ERROR_MASK & ~mask) { + add_error_device(e_info, dev); + goto added; } } return 0; + +added: + if (e_info->flags & AER_MULTI_ERROR_VALID_FLAG) + return 0; + else + return 1; } /** * find_source_device - search through device hierarchy for source device * @parent: pointer to Root Port pci_dev data structure - * @id: device ID of agent who sends an error message to this Root Port + * @err_info: including detailed error information such like id * * Invoked when error is detected at the Root Port. */ -static struct device* find_source_device(struct pci_dev *parent, u16 id) +static void find_source_device(struct pci_dev *parent, + struct aer_err_info *e_info) { struct pci_dev *dev = parent; - struct device *device; - unsigned long device_addr; - int status; + int result; /* Is Root Port an agent that sends error message? */ - if (id == ((dev->bus->number << 8) | dev->devfn)) - return &dev->dev; - - do { - device_addr = id; - if ((status = device_for_each_child(&dev->dev, - &device_addr, find_device_iter))) { - device = (struct device*)device_addr; - dev = to_pci_dev(device); - if (id == ((dev->bus->number << 8) | dev->devfn)) - return device; - } - }while (status); + result = find_device_iter(dev, e_info); + if (result) + return; - return NULL; + pci_walk_bus(parent->subordinate, find_device_iter, e_info); } -static void report_error_detected(struct pci_dev *dev, void *data) +static int report_error_detected(struct pci_dev *dev, void *data) { pci_ers_result_t vote; struct pci_error_handlers *err_handler; @@ -230,16 +311,16 @@ static void report_error_detected(struct pci_dev *dev, void *data) dev->driver ? "no AER-aware driver" : "no driver"); } - return; + return 0; } err_handler = dev->driver->err_handler; vote = err_handler->error_detected(dev, result_data->state); result_data->result = merge_result(result_data->result, vote); - return; + return 0; } -static void report_mmio_enabled(struct pci_dev *dev, void *data) +static int report_mmio_enabled(struct pci_dev *dev, void *data) { pci_ers_result_t vote; struct pci_error_handlers *err_handler; @@ -249,15 +330,15 @@ static void report_mmio_enabled(struct pci_dev *dev, void *data) if (!dev->driver || !dev->driver->err_handler || !dev->driver->err_handler->mmio_enabled) - return; + return 0; err_handler = dev->driver->err_handler; vote = err_handler->mmio_enabled(dev); result_data->result = merge_result(result_data->result, vote); - return; + return 0; } -static void report_slot_reset(struct pci_dev *dev, void *data) +static int report_slot_reset(struct pci_dev *dev, void *data) { pci_ers_result_t vote; struct pci_error_handlers *err_handler; @@ -267,15 +348,15 @@ static void report_slot_reset(struct pci_dev *dev, void *data) if (!dev->driver || !dev->driver->err_handler || !dev->driver->err_handler->slot_reset) - return; + return 0; err_handler = dev->driver->err_handler; vote = err_handler->slot_reset(dev); result_data->result = merge_result(result_data->result, vote); - return; + return 0; } -static void report_resume(struct pci_dev *dev, void *data) +static int report_resume(struct pci_dev *dev, void *data) { struct pci_error_handlers *err_handler; @@ -284,11 +365,11 @@ static void report_resume(struct pci_dev *dev, void *data) if (!dev->driver || !dev->driver->err_handler || !dev->driver->err_handler->resume) - return; + return 0; err_handler = dev->driver->err_handler; err_handler->resume(dev); - return; + return 0; } /** @@ -305,7 +386,7 @@ static void report_resume(struct pci_dev *dev, void *data) static pci_ers_result_t broadcast_error_message(struct pci_dev *dev, enum pci_channel_state state, char *error_mesg, - void (*cb)(struct pci_dev *, void *)) + int (*cb)(struct pci_dev *, void *)) { struct aer_broadcast_data result_data; @@ -497,12 +578,12 @@ static pci_ers_result_t do_recovery(struct pcie_device *aerdev, */ static void handle_error_source(struct pcie_device * aerdev, struct pci_dev *dev, - struct aer_err_info info) + struct aer_err_info *info) { pci_ers_result_t status = 0; int pos; - if (info.severity == AER_CORRECTABLE) { + if (info->severity == AER_CORRECTABLE) { /* * Correctable error does not need software intevention. * No need to go through error recovery process. @@ -510,9 +591,9 @@ static void handle_error_source(struct pcie_device * aerdev, pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); if (pos) pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, - info.status); + info->status); } else { - status = do_recovery(aerdev, dev, info.severity); + status = do_recovery(aerdev, dev, info->severity); if (status == PCI_ERS_RESULT_RECOVERED) { dev_printk(KERN_DEBUG, &dev->dev, "AER driver " "successfully recovered\n"); @@ -661,6 +742,28 @@ static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info) return AER_SUCCESS; } +static inline void aer_process_err_devices(struct pcie_device *p_device, + struct aer_err_info *e_info) +{ + int i; + + if (!e_info->dev[0]) { + dev_printk(KERN_DEBUG, &p_device->port->dev, + "can't find device of ID%04x\n", + e_info->id); + } + + for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) { + if (get_device_error_info(e_info->dev[i], e_info) == + AER_SUCCESS) { + aer_print_error(e_info->dev[i], e_info); + handle_error_source(p_device, + e_info->dev[i], + e_info); + } + } +} + /** * aer_isr_one_error - consume an error detected by root port * @p_device: pointer to error root port service device @@ -669,10 +772,16 @@ static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info) static void aer_isr_one_error(struct pcie_device *p_device, struct aer_err_source *e_src) { - struct device *s_device; - struct aer_err_info e_info = {0, 0, 0,}; + struct aer_err_info *e_info; int i; - u16 id; + + /* struct aer_err_info might be big, so we allocate it with slab */ + e_info = kmalloc(sizeof(struct aer_err_info), GFP_KERNEL); + if (e_info == NULL) { + dev_printk(KERN_DEBUG, &p_device->port->dev, + "Can't allocate mem when processing AER errors\n"); + return; + } /* * There is a possibility that both correctable error and @@ -684,31 +793,26 @@ static void aer_isr_one_error(struct pcie_device *p_device, if (!(e_src->status & i)) continue; + memset(e_info, 0, sizeof(struct aer_err_info)); + /* Init comprehensive error information */ if (i & PCI_ERR_ROOT_COR_RCV) { - id = ERR_COR_ID(e_src->id); - e_info.severity = AER_CORRECTABLE; + e_info->id = ERR_COR_ID(e_src->id); + e_info->severity = AER_CORRECTABLE; } else { - id = ERR_UNCOR_ID(e_src->id); - e_info.severity = ((e_src->status >> 6) & 1); + e_info->id = ERR_UNCOR_ID(e_src->id); + e_info->severity = ((e_src->status >> 6) & 1); } if (e_src->status & (PCI_ERR_ROOT_MULTI_COR_RCV | PCI_ERR_ROOT_MULTI_UNCOR_RCV)) - e_info.flags |= AER_MULTI_ERROR_VALID_FLAG; - if (!(s_device = find_source_device(p_device->port, id))) { - printk(KERN_DEBUG "%s->can't find device of ID%04x\n", - __func__, id); - continue; - } - if (get_device_error_info(to_pci_dev(s_device), &e_info) == - AER_SUCCESS) { - aer_print_error(to_pci_dev(s_device), &e_info); - handle_error_source(p_device, - to_pci_dev(s_device), - e_info); - } + e_info->flags |= AER_MULTI_ERROR_VALID_FLAG; + + find_source_device(p_device->port, e_info); + aer_process_err_devices(p_device, e_info); } + + kfree(e_info); } /** diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c new file mode 100644 index 000000000000..ece97df4df6d --- /dev/null +++ b/drivers/pci/pcie/aer/ecrc.c @@ -0,0 +1,131 @@ +/* + * Enables/disables PCIe ECRC checking. + * + * (C) Copyright 2009 Hewlett-Packard Development Company, L.P. + * Andrew Patterson <andrew.patterson@hp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/errno.h> +#include "../../pci.h" + +#define ECRC_POLICY_DEFAULT 0 /* ECRC set by BIOS */ +#define ECRC_POLICY_OFF 1 /* ECRC off for performance */ +#define ECRC_POLICY_ON 2 /* ECRC on for data integrity */ + +static int ecrc_policy = ECRC_POLICY_DEFAULT; + +static const char *ecrc_policy_str[] = { + [ECRC_POLICY_DEFAULT] = "bios", + [ECRC_POLICY_OFF] = "off", + [ECRC_POLICY_ON] = "on" +}; + +/** + * enable_ercr_checking - enable PCIe ECRC checking for a device + * @dev: the PCI device + * + * Returns 0 on success, or negative on failure. + */ +static int enable_ecrc_checking(struct pci_dev *dev) +{ + int pos; + u32 reg32; + + if (!dev->is_pcie) + return -ENODEV; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (!pos) + return -ENODEV; + + pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32); + if (reg32 & PCI_ERR_CAP_ECRC_GENC) + reg32 |= PCI_ERR_CAP_ECRC_GENE; + if (reg32 & PCI_ERR_CAP_ECRC_CHKC) + reg32 |= PCI_ERR_CAP_ECRC_CHKE; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32); + + return 0; +} + +/** + * disable_ercr_checking - disables PCIe ECRC checking for a device + * @dev: the PCI device + * + * Returns 0 on success, or negative on failure. + */ +static int disable_ecrc_checking(struct pci_dev *dev) +{ + int pos; + u32 reg32; + + if (!dev->is_pcie) + return -ENODEV; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (!pos) + return -ENODEV; + + pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32); + reg32 &= ~(PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE); + pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32); + + return 0; +} + +/** + * pcie_set_ecrc_checking - set/unset PCIe ECRC checking for a device based on global policy + * @dev: the PCI device + */ +void pcie_set_ecrc_checking(struct pci_dev *dev) +{ + switch (ecrc_policy) { + case ECRC_POLICY_DEFAULT: + return; + case ECRC_POLICY_OFF: + disable_ecrc_checking(dev); + break; + case ECRC_POLICY_ON: + enable_ecrc_checking(dev);; + break; + default: + return; + } +} + +/** + * pcie_ecrc_get_policy - parse kernel command-line ecrc option + */ +void pcie_ecrc_get_policy(char *str) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ecrc_policy_str); i++) + if (!strncmp(str, ecrc_policy_str[i], + strlen(ecrc_policy_str[i]))) + break; + if (i >= ARRAY_SIZE(ecrc_policy_str)) + return; + + ecrc_policy = i; +} diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index b0367f168af4..3d27c97e0486 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -26,40 +26,36 @@ #endif #define MODULE_PARAM_PREFIX "pcie_aspm." -struct endpoint_state { - unsigned int l0s_acceptable_latency; - unsigned int l1_acceptable_latency; +struct aspm_latency { + u32 l0s; /* L0s latency (nsec) */ + u32 l1; /* L1 latency (nsec) */ }; struct pcie_link_state { - struct list_head sibiling; - struct pci_dev *pdev; - bool downstream_has_switch; - - struct pcie_link_state *parent; - struct list_head children; - struct list_head link; + struct pci_dev *pdev; /* Upstream component of the Link */ + struct pcie_link_state *root; /* pointer to the root port link */ + struct pcie_link_state *parent; /* pointer to the parent Link state */ + struct list_head sibling; /* node in link_list */ + struct list_head children; /* list of child link states */ + struct list_head link; /* node in parent's children list */ /* ASPM state */ - unsigned int support_state; - unsigned int enabled_state; - unsigned int bios_aspm_state; - /* upstream component */ - unsigned int l0s_upper_latency; - unsigned int l1_upper_latency; - /* downstream component */ - unsigned int l0s_down_latency; - unsigned int l1_down_latency; - /* Clock PM state*/ - unsigned int clk_pm_capable; - unsigned int clk_pm_enabled; - unsigned int bios_clk_state; + u32 aspm_support:2; /* Supported ASPM state */ + u32 aspm_enabled:2; /* Enabled ASPM state */ + u32 aspm_default:2; /* Default ASPM state by BIOS */ + + /* Clock PM state */ + u32 clkpm_capable:1; /* Clock PM capable? */ + u32 clkpm_enabled:1; /* Current Clock PM state */ + u32 clkpm_default:1; /* Default Clock PM state by BIOS */ + /* Latencies */ + struct aspm_latency latency; /* Exit latency */ /* - * A pcie downstream port only has one slot under it, so at most there - * are 8 functions + * Endpoint acceptable latencies. A pcie downstream port only + * has one slot under it, so at most there are 8 functions. */ - struct endpoint_state endpoints[8]; + struct aspm_latency acceptable[8]; }; static int aspm_disabled, aspm_force; @@ -78,27 +74,23 @@ static const char *policy_str[] = { #define LINK_RETRAIN_TIMEOUT HZ -static int policy_to_aspm_state(struct pci_dev *pdev) +static int policy_to_aspm_state(struct pcie_link_state *link) { - struct pcie_link_state *link_state = pdev->link_state; - switch (aspm_policy) { case POLICY_PERFORMANCE: /* Disable ASPM and Clock PM */ return 0; case POLICY_POWERSAVE: /* Enable ASPM L0s/L1 */ - return PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1; + return PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1; case POLICY_DEFAULT: - return link_state->bios_aspm_state; + return link->aspm_default; } return 0; } -static int policy_to_clkpm_state(struct pci_dev *pdev) +static int policy_to_clkpm_state(struct pcie_link_state *link) { - struct pcie_link_state *link_state = pdev->link_state; - switch (aspm_policy) { case POLICY_PERFORMANCE: /* Disable ASPM and Clock PM */ @@ -107,73 +99,78 @@ static int policy_to_clkpm_state(struct pci_dev *pdev) /* Disable Clock PM */ return 1; case POLICY_DEFAULT: - return link_state->bios_clk_state; + return link->clkpm_default; } return 0; } -static void pcie_set_clock_pm(struct pci_dev *pdev, int enable) +static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable) { - struct pci_dev *child_dev; int pos; u16 reg16; - struct pcie_link_state *link_state = pdev->link_state; + struct pci_dev *child; + struct pci_bus *linkbus = link->pdev->subordinate; - list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { - pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); + list_for_each_entry(child, &linkbus->devices, bus_list) { + pos = pci_find_capability(child, PCI_CAP_ID_EXP); if (!pos) return; - pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, ®16); + pci_read_config_word(child, pos + PCI_EXP_LNKCTL, ®16); if (enable) reg16 |= PCI_EXP_LNKCTL_CLKREQ_EN; else reg16 &= ~PCI_EXP_LNKCTL_CLKREQ_EN; - pci_write_config_word(child_dev, pos + PCI_EXP_LNKCTL, reg16); + pci_write_config_word(child, pos + PCI_EXP_LNKCTL, reg16); } - link_state->clk_pm_enabled = !!enable; + link->clkpm_enabled = !!enable; } -static void pcie_check_clock_pm(struct pci_dev *pdev, int blacklist) +static void pcie_set_clkpm(struct pcie_link_state *link, int enable) { - int pos; + /* Don't enable Clock PM if the link is not Clock PM capable */ + if (!link->clkpm_capable && enable) + return; + /* Need nothing if the specified equals to current state */ + if (link->clkpm_enabled == enable) + return; + pcie_set_clkpm_nocheck(link, enable); +} + +static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist) +{ + int pos, capable = 1, enabled = 1; u32 reg32; u16 reg16; - int capable = 1, enabled = 1; - struct pci_dev *child_dev; - struct pcie_link_state *link_state = pdev->link_state; + struct pci_dev *child; + struct pci_bus *linkbus = link->pdev->subordinate; /* All functions should have the same cap and state, take the worst */ - list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { - pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); + list_for_each_entry(child, &linkbus->devices, bus_list) { + pos = pci_find_capability(child, PCI_CAP_ID_EXP); if (!pos) return; - pci_read_config_dword(child_dev, pos + PCI_EXP_LNKCAP, ®32); + pci_read_config_dword(child, pos + PCI_EXP_LNKCAP, ®32); if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) { capable = 0; enabled = 0; break; } - pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, ®16); + pci_read_config_word(child, pos + PCI_EXP_LNKCTL, ®16); if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN)) enabled = 0; } - link_state->clk_pm_enabled = enabled; - link_state->bios_clk_state = enabled; - if (!blacklist) { - link_state->clk_pm_capable = capable; - pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev)); - } else { - link_state->clk_pm_capable = 0; - pcie_set_clock_pm(pdev, 0); - } + link->clkpm_enabled = enabled; + link->clkpm_default = enabled; + link->clkpm_capable = (blacklist) ? 0 : capable; } -static bool pcie_aspm_downstream_has_switch(struct pci_dev *pdev) +static bool pcie_aspm_downstream_has_switch(struct pcie_link_state *link) { - struct pci_dev *child_dev; + struct pci_dev *child; + struct pci_bus *linkbus = link->pdev->subordinate; - list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { - if (child_dev->pcie_type == PCI_EXP_TYPE_UPSTREAM) + list_for_each_entry(child, &linkbus->devices, bus_list) { + if (child->pcie_type == PCI_EXP_TYPE_UPSTREAM) return true; } return false; @@ -184,289 +181,263 @@ static bool pcie_aspm_downstream_has_switch(struct pci_dev *pdev) * could use common clock. If they are, configure them to use the * common clock. That will reduce the ASPM state exit latency. */ -static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) +static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) { - int pos, child_pos, i = 0; - u16 reg16 = 0; - struct pci_dev *child_dev; - int same_clock = 1; + int ppos, cpos, same_clock = 1; + u16 reg16, parent_reg, child_reg[8]; unsigned long start_jiffies; - u16 child_regs[8], parent_reg; + struct pci_dev *child, *parent = link->pdev; + struct pci_bus *linkbus = parent->subordinate; /* - * all functions of a slot should have the same Slot Clock + * All functions of a slot should have the same Slot Clock * Configuration, so just check one function - * */ - child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev, - bus_list); - BUG_ON(!child_dev->is_pcie); + */ + child = list_entry(linkbus->devices.next, struct pci_dev, bus_list); + BUG_ON(!child->is_pcie); /* Check downstream component if bit Slot Clock Configuration is 1 */ - child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); - pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKSTA, ®16); + cpos = pci_find_capability(child, PCI_CAP_ID_EXP); + pci_read_config_word(child, cpos + PCI_EXP_LNKSTA, ®16); if (!(reg16 & PCI_EXP_LNKSTA_SLC)) same_clock = 0; /* Check upstream component if bit Slot Clock Configuration is 1 */ - pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); - pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); + ppos = pci_find_capability(parent, PCI_CAP_ID_EXP); + pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, ®16); if (!(reg16 & PCI_EXP_LNKSTA_SLC)) same_clock = 0; /* Configure downstream component, all functions */ - list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { - child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); - pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, - ®16); - child_regs[i] = reg16; + list_for_each_entry(child, &linkbus->devices, bus_list) { + cpos = pci_find_capability(child, PCI_CAP_ID_EXP); + pci_read_config_word(child, cpos + PCI_EXP_LNKCTL, ®16); + child_reg[PCI_FUNC(child->devfn)] = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; - pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, - reg16); - i++; + pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16); } /* Configure upstream component */ - pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); + pci_read_config_word(parent, ppos + PCI_EXP_LNKCTL, ®16); parent_reg = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; - pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); - /* retrain link */ + /* Retrain link */ reg16 |= PCI_EXP_LNKCTL_RL; - pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); - /* Wait for link training end */ - /* break out after waiting for timeout */ + /* Wait for link training end. Break out after waiting for timeout */ start_jiffies = jiffies; for (;;) { - pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); + pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, ®16); if (!(reg16 & PCI_EXP_LNKSTA_LT)) break; if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT)) break; msleep(1); } - /* training failed -> recover */ - if (reg16 & PCI_EXP_LNKSTA_LT) { - dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure" - " common clock\n"); - i = 0; - list_for_each_entry(child_dev, &pdev->subordinate->devices, - bus_list) { - child_pos = pci_find_capability(child_dev, - PCI_CAP_ID_EXP); - pci_write_config_word(child_dev, - child_pos + PCI_EXP_LNKCTL, - child_regs[i]); - i++; - } - pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg); + if (!(reg16 & PCI_EXP_LNKSTA_LT)) + return; + + /* Training failed. Restore common clock configurations */ + dev_printk(KERN_ERR, &parent->dev, + "ASPM: Could not configure common clock\n"); + list_for_each_entry(child, &linkbus->devices, bus_list) { + cpos = pci_find_capability(child, PCI_CAP_ID_EXP); + pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, + child_reg[PCI_FUNC(child->devfn)]); } + pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, parent_reg); } -/* - * calc_L0S_latency: Convert L0s latency encoding to ns - */ -static unsigned int calc_L0S_latency(unsigned int latency_encoding, int ac) +/* Convert L0s latency encoding to ns */ +static u32 calc_l0s_latency(u32 encoding) { - unsigned int ns = 64; + if (encoding == 0x7) + return (5 * 1000); /* > 4us */ + return (64 << encoding); +} - if (latency_encoding == 0x7) { - if (ac) - ns = -1U; - else - ns = 5*1000; /* > 4us */ - } else - ns *= (1 << latency_encoding); - return ns; +/* Convert L0s acceptable latency encoding to ns */ +static u32 calc_l0s_acceptable(u32 encoding) +{ + if (encoding == 0x7) + return -1U; + return (64 << encoding); } -/* - * calc_L1_latency: Convert L1 latency encoding to ns - */ -static unsigned int calc_L1_latency(unsigned int latency_encoding, int ac) +/* Convert L1 latency encoding to ns */ +static u32 calc_l1_latency(u32 encoding) { - unsigned int ns = 1000; + if (encoding == 0x7) + return (65 * 1000); /* > 64us */ + return (1000 << encoding); +} - if (latency_encoding == 0x7) { - if (ac) - ns = -1U; - else - ns = 65*1000; /* > 64us */ - } else - ns *= (1 << latency_encoding); - return ns; +/* Convert L1 acceptable latency encoding to ns */ +static u32 calc_l1_acceptable(u32 encoding) +{ + if (encoding == 0x7) + return -1U; + return (1000 << encoding); } static void pcie_aspm_get_cap_device(struct pci_dev *pdev, u32 *state, - unsigned int *l0s, unsigned int *l1, unsigned int *enabled) + u32 *l0s, u32 *l1, u32 *enabled) { int pos; u16 reg16; - u32 reg32; - unsigned int latency; + u32 reg32, encoding; + *l0s = *l1 = *enabled = 0; pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32); *state = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10; if (*state != PCIE_LINK_STATE_L0S && - *state != (PCIE_LINK_STATE_L1|PCIE_LINK_STATE_L0S)) + *state != (PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_L0S)) *state = 0; if (*state == 0) return; - latency = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12; - *l0s = calc_L0S_latency(latency, 0); + encoding = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12; + *l0s = calc_l0s_latency(encoding); if (*state & PCIE_LINK_STATE_L1) { - latency = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15; - *l1 = calc_L1_latency(latency, 0); + encoding = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15; + *l1 = calc_l1_latency(encoding); } pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); - *enabled = reg16 & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1); + *enabled = reg16 & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1); } -static void pcie_aspm_cap_init(struct pci_dev *pdev) +static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) { - struct pci_dev *child_dev; - u32 state, tmp; - struct pcie_link_state *link_state = pdev->link_state; + u32 support, l0s, l1, enabled; + struct pci_dev *child, *parent = link->pdev; + struct pci_bus *linkbus = parent->subordinate; + + if (blacklist) { + /* Set support state to 0, so we will disable ASPM later */ + link->aspm_support = 0; + link->aspm_default = 0; + link->aspm_enabled = PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1; + return; + } + + /* Configure common clock before checking latencies */ + pcie_aspm_configure_common_clock(link); /* upstream component states */ - pcie_aspm_get_cap_device(pdev, &link_state->support_state, - &link_state->l0s_upper_latency, - &link_state->l1_upper_latency, - &link_state->enabled_state); + pcie_aspm_get_cap_device(parent, &support, &l0s, &l1, &enabled); + link->aspm_support = support; + link->latency.l0s = l0s; + link->latency.l1 = l1; + link->aspm_enabled = enabled; + /* downstream component states, all functions have the same setting */ - child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev, - bus_list); - pcie_aspm_get_cap_device(child_dev, &state, - &link_state->l0s_down_latency, - &link_state->l1_down_latency, - &tmp); - link_state->support_state &= state; - if (!link_state->support_state) + child = list_entry(linkbus->devices.next, struct pci_dev, bus_list); + pcie_aspm_get_cap_device(child, &support, &l0s, &l1, &enabled); + link->aspm_support &= support; + link->latency.l0s = max_t(u32, link->latency.l0s, l0s); + link->latency.l1 = max_t(u32, link->latency.l1, l1); + + if (!link->aspm_support) return; - link_state->enabled_state &= link_state->support_state; - link_state->bios_aspm_state = link_state->enabled_state; + + link->aspm_enabled &= link->aspm_support; + link->aspm_default = link->aspm_enabled; /* ENDPOINT states*/ - list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { + list_for_each_entry(child, &linkbus->devices, bus_list) { int pos; - u32 reg32; - unsigned int latency; - struct endpoint_state *ep_state = - &link_state->endpoints[PCI_FUNC(child_dev->devfn)]; + u32 reg32, encoding; + struct aspm_latency *acceptable = + &link->acceptable[PCI_FUNC(child->devfn)]; - if (child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT && - child_dev->pcie_type != PCI_EXP_TYPE_LEG_END) + if (child->pcie_type != PCI_EXP_TYPE_ENDPOINT && + child->pcie_type != PCI_EXP_TYPE_LEG_END) continue; - pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); - pci_read_config_dword(child_dev, pos + PCI_EXP_DEVCAP, ®32); - latency = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6; - latency = calc_L0S_latency(latency, 1); - ep_state->l0s_acceptable_latency = latency; - if (link_state->support_state & PCIE_LINK_STATE_L1) { - latency = (reg32 & PCI_EXP_DEVCAP_L1) >> 9; - latency = calc_L1_latency(latency, 1); - ep_state->l1_acceptable_latency = latency; + pos = pci_find_capability(child, PCI_CAP_ID_EXP); + pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, ®32); + encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6; + acceptable->l0s = calc_l0s_acceptable(encoding); + if (link->aspm_support & PCIE_LINK_STATE_L1) { + encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9; + acceptable->l1 = calc_l1_acceptable(encoding); } } } -static unsigned int __pcie_aspm_check_state_one(struct pci_dev *pdev, - unsigned int state) -{ - struct pci_dev *parent_dev, *tmp_dev; - unsigned int latency, l1_latency = 0; - struct pcie_link_state *link_state; - struct endpoint_state *ep_state; - - parent_dev = pdev->bus->self; - link_state = parent_dev->link_state; - state &= link_state->support_state; - if (state == 0) - return 0; - ep_state = &link_state->endpoints[PCI_FUNC(pdev->devfn)]; - - /* - * Check latency for endpoint device. - * TBD: The latency from the endpoint to root complex vary per - * switch's upstream link state above the device. Here we just do a - * simple check which assumes all links above the device can be in L1 - * state, that is we just consider the worst case. If switch's upstream - * link can't be put into L0S/L1, then our check is too strictly. - */ - tmp_dev = pdev; - while (state & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) { - parent_dev = tmp_dev->bus->self; - link_state = parent_dev->link_state; - if (state & PCIE_LINK_STATE_L0S) { - latency = max_t(unsigned int, - link_state->l0s_upper_latency, - link_state->l0s_down_latency); - if (latency > ep_state->l0s_acceptable_latency) - state &= ~PCIE_LINK_STATE_L0S; - } - if (state & PCIE_LINK_STATE_L1) { - latency = max_t(unsigned int, - link_state->l1_upper_latency, - link_state->l1_down_latency); - if (latency + l1_latency > - ep_state->l1_acceptable_latency) - state &= ~PCIE_LINK_STATE_L1; - } - if (!parent_dev->bus->self) /* parent_dev is a root port */ - break; - else { - /* - * parent_dev is the downstream port of a switch, make - * tmp_dev the upstream port of the switch - */ - tmp_dev = parent_dev->bus->self; - /* - * every switch on the path to root complex need 1 more - * microsecond for L1. Spec doesn't mention L0S. - */ - if (state & PCIE_LINK_STATE_L1) - l1_latency += 1000; - } +/** + * __pcie_aspm_check_state_one - check latency for endpoint device. + * @endpoint: pointer to the struct pci_dev of endpoint device + * + * TBD: The latency from the endpoint to root complex vary per switch's + * upstream link state above the device. Here we just do a simple check + * which assumes all links above the device can be in L1 state, that + * is we just consider the worst case. If switch's upstream link can't + * be put into L0S/L1, then our check is too strictly. + */ +static u32 __pcie_aspm_check_state_one(struct pci_dev *endpoint, u32 state) +{ + u32 l1_switch_latency = 0; + struct aspm_latency *acceptable; + struct pcie_link_state *link; + + link = endpoint->bus->self->link_state; + state &= link->aspm_support; + acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)]; + + while (link && state) { + if ((state & PCIE_LINK_STATE_L0S) && + (link->latency.l0s > acceptable->l0s)) + state &= ~PCIE_LINK_STATE_L0S; + if ((state & PCIE_LINK_STATE_L1) && + (link->latency.l1 + l1_switch_latency > acceptable->l1)) + state &= ~PCIE_LINK_STATE_L1; + link = link->parent; + /* + * Every switch on the path to root complex need 1 + * more microsecond for L1. Spec doesn't mention L0s. + */ + l1_switch_latency += 1000; } return state; } -static unsigned int pcie_aspm_check_state(struct pci_dev *pdev, - unsigned int state) +static u32 pcie_aspm_check_state(struct pcie_link_state *link, u32 state) { - struct pci_dev *child_dev; + pci_power_t power_state; + struct pci_dev *child; + struct pci_bus *linkbus = link->pdev->subordinate; /* If no child, ignore the link */ - if (list_empty(&pdev->subordinate->devices)) + if (list_empty(&linkbus->devices)) return state; - list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { - if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { - /* - * If downstream component of a link is pci bridge, we - * disable ASPM for now for the link - * */ - state = 0; - break; - } - if ((child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT && - child_dev->pcie_type != PCI_EXP_TYPE_LEG_END)) + + list_for_each_entry(child, &linkbus->devices, bus_list) { + /* + * If downstream component of a link is pci bridge, we + * disable ASPM for now for the link + */ + if (child->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) + return 0; + + if ((child->pcie_type != PCI_EXP_TYPE_ENDPOINT && + child->pcie_type != PCI_EXP_TYPE_LEG_END)) continue; /* Device not in D0 doesn't need check latency */ - if (child_dev->current_state == PCI_D1 || - child_dev->current_state == PCI_D2 || - child_dev->current_state == PCI_D3hot || - child_dev->current_state == PCI_D3cold) + power_state = child->current_state; + if (power_state == PCI_D1 || power_state == PCI_D2 || + power_state == PCI_D3hot || power_state == PCI_D3cold) continue; - state = __pcie_aspm_check_state_one(child_dev, state); + state = __pcie_aspm_check_state_one(child, state); } return state; } @@ -482,90 +453,71 @@ static void __pcie_aspm_config_one_dev(struct pci_dev *pdev, unsigned int state) pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); } -static void __pcie_aspm_config_link(struct pci_dev *pdev, unsigned int state) +static void __pcie_aspm_config_link(struct pcie_link_state *link, u32 state) { - struct pci_dev *child_dev; - int valid = 1; - struct pcie_link_state *link_state = pdev->link_state; + struct pci_dev *child, *parent = link->pdev; + struct pci_bus *linkbus = parent->subordinate; /* If no child, disable the link */ - if (list_empty(&pdev->subordinate->devices)) + if (list_empty(&linkbus->devices)) state = 0; /* - * if the downstream component has pci bridge function, don't do ASPM - * now + * If the downstream component has pci bridge function, don't + * do ASPM now. */ - list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { - if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { - valid = 0; - break; - } + list_for_each_entry(child, &linkbus->devices, bus_list) { + if (child->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) + return; } - if (!valid) - return; - /* - * spec 2.0 suggests all functions should be configured the same - * setting for ASPM. Enabling ASPM L1 should be done in upstream - * component first and then downstream, and vice versa for disabling - * ASPM L1. Spec doesn't mention L0S. + * Spec 2.0 suggests all functions should be configured the + * same setting for ASPM. Enabling ASPM L1 should be done in + * upstream component first and then downstream, and vice + * versa for disabling ASPM L1. Spec doesn't mention L0S. */ if (state & PCIE_LINK_STATE_L1) - __pcie_aspm_config_one_dev(pdev, state); + __pcie_aspm_config_one_dev(parent, state); - list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) - __pcie_aspm_config_one_dev(child_dev, state); + list_for_each_entry(child, &linkbus->devices, bus_list) + __pcie_aspm_config_one_dev(child, state); if (!(state & PCIE_LINK_STATE_L1)) - __pcie_aspm_config_one_dev(pdev, state); + __pcie_aspm_config_one_dev(parent, state); - link_state->enabled_state = state; + link->aspm_enabled = state; } -static struct pcie_link_state *get_root_port_link(struct pcie_link_state *link) +/* Check the whole hierarchy, and configure each link in the hierarchy */ +static void __pcie_aspm_configure_link_state(struct pcie_link_state *link, + u32 state) { - struct pcie_link_state *root_port_link = link; - while (root_port_link->parent) - root_port_link = root_port_link->parent; - return root_port_link; -} + struct pcie_link_state *leaf, *root = link->root; -/* check the whole hierarchy, and configure each link in the hierarchy */ -static void __pcie_aspm_configure_link_state(struct pci_dev *pdev, - unsigned int state) -{ - struct pcie_link_state *link_state = pdev->link_state; - struct pcie_link_state *root_port_link = get_root_port_link(link_state); - struct pcie_link_state *leaf; + state &= (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1); - state &= PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1; - - /* check all links who have specific root port link */ - list_for_each_entry(leaf, &link_list, sibiling) { - if (!list_empty(&leaf->children) || - get_root_port_link(leaf) != root_port_link) + /* Check all links who have specific root port link */ + list_for_each_entry(leaf, &link_list, sibling) { + if (!list_empty(&leaf->children) || (leaf->root != root)) continue; - state = pcie_aspm_check_state(leaf->pdev, state); + state = pcie_aspm_check_state(leaf, state); } - /* check root port link too in case it hasn't children */ - state = pcie_aspm_check_state(root_port_link->pdev, state); - - if (link_state->enabled_state == state) + /* Check root port link too in case it hasn't children */ + state = pcie_aspm_check_state(root, state); + if (link->aspm_enabled == state) return; - /* - * we must change the hierarchy. See comments in + * We must change the hierarchy. See comments in * __pcie_aspm_config_link for the order **/ if (state & PCIE_LINK_STATE_L1) { - list_for_each_entry(leaf, &link_list, sibiling) { - if (get_root_port_link(leaf) == root_port_link) - __pcie_aspm_config_link(leaf->pdev, state); + list_for_each_entry(leaf, &link_list, sibling) { + if (leaf->root == root) + __pcie_aspm_config_link(leaf, state); } } else { - list_for_each_entry_reverse(leaf, &link_list, sibiling) { - if (get_root_port_link(leaf) == root_port_link) - __pcie_aspm_config_link(leaf->pdev, state); + list_for_each_entry_reverse(leaf, &link_list, sibling) { + if (leaf->root == root) + __pcie_aspm_config_link(leaf, state); } } } @@ -574,45 +526,42 @@ static void __pcie_aspm_configure_link_state(struct pci_dev *pdev, * pcie_aspm_configure_link_state: enable/disable PCI express link state * @pdev: the root port or switch downstream port */ -static void pcie_aspm_configure_link_state(struct pci_dev *pdev, - unsigned int state) +static void pcie_aspm_configure_link_state(struct pcie_link_state *link, + u32 state) { down_read(&pci_bus_sem); mutex_lock(&aspm_lock); - __pcie_aspm_configure_link_state(pdev, state); + __pcie_aspm_configure_link_state(link, state); mutex_unlock(&aspm_lock); up_read(&pci_bus_sem); } -static void free_link_state(struct pci_dev *pdev) +static void free_link_state(struct pcie_link_state *link) { - kfree(pdev->link_state); - pdev->link_state = NULL; + link->pdev->link_state = NULL; + kfree(link); } static int pcie_aspm_sanity_check(struct pci_dev *pdev) { - struct pci_dev *child_dev; - int child_pos; + struct pci_dev *child; + int pos; u32 reg32; - /* - * Some functions in a slot might not all be PCIE functions, very - * strange. Disable ASPM for the whole slot + * Some functions in a slot might not all be PCIE functions, + * very strange. Disable ASPM for the whole slot */ - list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { - child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); - if (!child_pos) + list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { + pos = pci_find_capability(child, PCI_CAP_ID_EXP); + if (!pos) return -EINVAL; - /* * Disable ASPM for pre-1.1 PCIe device, we follow MS to use * RBER bit to determine if a function is 1.1 version device */ - pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP, - ®32); + pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, ®32); if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) { - dev_printk(KERN_INFO, &child_dev->dev, "disabling ASPM" + dev_printk(KERN_INFO, &child->dev, "disabling ASPM" " on pre-1.1 PCIe device. You can enable it" " with 'pcie_aspm=force'\n"); return -EINVAL; @@ -621,6 +570,47 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) return 0; } +static struct pcie_link_state *pcie_aspm_setup_link_state(struct pci_dev *pdev) +{ + struct pcie_link_state *link; + int blacklist = !!pcie_aspm_sanity_check(pdev); + + link = kzalloc(sizeof(*link), GFP_KERNEL); + if (!link) + return NULL; + INIT_LIST_HEAD(&link->sibling); + INIT_LIST_HEAD(&link->children); + INIT_LIST_HEAD(&link->link); + link->pdev = pdev; + if (pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM) { + struct pcie_link_state *parent; + parent = pdev->bus->parent->self->link_state; + if (!parent) { + kfree(link); + return NULL; + } + link->parent = parent; + list_add(&link->link, &parent->children); + } + /* Setup a pointer to the root port link */ + if (!link->parent) + link->root = link; + else + link->root = link->parent->root; + + list_add(&link->sibling, &link_list); + + pdev->link_state = link; + + /* Check ASPM capability */ + pcie_aspm_cap_init(link, blacklist); + + /* Check Clock PM capability */ + pcie_clkpm_cap_init(link, blacklist); + + return link; +} + /* * pcie_aspm_init_link_state: Initiate PCI express link state. * It is called after the pcie and its children devices are scaned. @@ -628,75 +618,47 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) */ void pcie_aspm_init_link_state(struct pci_dev *pdev) { - unsigned int state; - struct pcie_link_state *link_state; - int error = 0; - int blacklist; + u32 state; + struct pcie_link_state *link; if (aspm_disabled || !pdev->is_pcie || pdev->link_state) return; if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && - pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) + pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) + return; + + /* VIA has a strange chipset, root port is under a bridge */ + if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT && + pdev->bus->self) return; + down_read(&pci_bus_sem); if (list_empty(&pdev->subordinate->devices)) goto out; - blacklist = !!pcie_aspm_sanity_check(pdev); - mutex_lock(&aspm_lock); - - link_state = kzalloc(sizeof(*link_state), GFP_KERNEL); - if (!link_state) - goto unlock_out; - - link_state->downstream_has_switch = pcie_aspm_downstream_has_switch(pdev); - INIT_LIST_HEAD(&link_state->children); - INIT_LIST_HEAD(&link_state->link); - if (pdev->bus->self) {/* this is a switch */ - struct pcie_link_state *parent_link_state; - - parent_link_state = pdev->bus->parent->self->link_state; - if (!parent_link_state) { - kfree(link_state); - goto unlock_out; - } - list_add(&link_state->link, &parent_link_state->children); - link_state->parent = parent_link_state; - } - - pdev->link_state = link_state; - - if (!blacklist) { - pcie_aspm_configure_common_clock(pdev); - pcie_aspm_cap_init(pdev); + link = pcie_aspm_setup_link_state(pdev); + if (!link) + goto unlock; + /* + * Setup initial ASPM state + * + * If link has switch, delay the link config. The leaf link + * initialization will config the whole hierarchy. But we must + * make sure BIOS doesn't set unsupported link state. + */ + if (pcie_aspm_downstream_has_switch(link)) { + state = pcie_aspm_check_state(link, link->aspm_default); + __pcie_aspm_config_link(link, state); } else { - link_state->enabled_state = PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1; - link_state->bios_aspm_state = 0; - /* Set support state to 0, so we will disable ASPM later */ - link_state->support_state = 0; + state = policy_to_aspm_state(link); + __pcie_aspm_configure_link_state(link, state); } - link_state->pdev = pdev; - list_add(&link_state->sibiling, &link_list); - - if (link_state->downstream_has_switch) { - /* - * If link has switch, delay the link config. The leaf link - * initialization will config the whole hierarchy. but we must - * make sure BIOS doesn't set unsupported link state - **/ - state = pcie_aspm_check_state(pdev, link_state->bios_aspm_state); - __pcie_aspm_config_link(pdev, state); - } else - __pcie_aspm_configure_link_state(pdev, - policy_to_aspm_state(pdev)); - - pcie_check_clock_pm(pdev, blacklist); - -unlock_out: - if (error) - free_link_state(pdev); + /* Setup initial Clock PM state */ + state = (link->clkpm_capable) ? policy_to_clkpm_state(link) : 0; + pcie_set_clkpm(link, state); +unlock: mutex_unlock(&aspm_lock); out: up_read(&pci_bus_sem); @@ -725,11 +687,11 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) /* All functions are removed, so just disable ASPM for the link */ __pcie_aspm_config_one_dev(parent, 0); - list_del(&link_state->sibiling); + list_del(&link_state->sibling); list_del(&link_state->link); /* Clock PM is for endpoint device */ - free_link_state(parent); + free_link_state(link_state); out: mutex_unlock(&aspm_lock); up_read(&pci_bus_sem); @@ -749,7 +711,7 @@ void pcie_aspm_pm_state_change(struct pci_dev *pdev) * devices changed PM state, we should recheck if latency meets all * functions' requirement */ - pcie_aspm_configure_link_state(pdev, link_state->enabled_state); + pcie_aspm_configure_link_state(link_state, link_state->aspm_enabled); } /* @@ -772,14 +734,12 @@ void pci_disable_link_state(struct pci_dev *pdev, int state) down_read(&pci_bus_sem); mutex_lock(&aspm_lock); link_state = parent->link_state; - link_state->support_state &= - ~(state & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1)); - if (state & PCIE_LINK_STATE_CLKPM) - link_state->clk_pm_capable = 0; - - __pcie_aspm_configure_link_state(parent, link_state->enabled_state); - if (!link_state->clk_pm_capable && link_state->clk_pm_enabled) - pcie_set_clock_pm(parent, 0); + link_state->aspm_support &= ~state; + __pcie_aspm_configure_link_state(link_state, link_state->aspm_enabled); + if (state & PCIE_LINK_STATE_CLKPM) { + link_state->clkpm_capable = 0; + pcie_set_clkpm(link_state, 0); + } mutex_unlock(&aspm_lock); up_read(&pci_bus_sem); } @@ -788,7 +748,6 @@ EXPORT_SYMBOL(pci_disable_link_state); static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp) { int i; - struct pci_dev *pdev; struct pcie_link_state *link_state; for (i = 0; i < ARRAY_SIZE(policy_str); i++) @@ -802,14 +761,10 @@ static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp) down_read(&pci_bus_sem); mutex_lock(&aspm_lock); aspm_policy = i; - list_for_each_entry(link_state, &link_list, sibiling) { - pdev = link_state->pdev; - __pcie_aspm_configure_link_state(pdev, - policy_to_aspm_state(pdev)); - if (link_state->clk_pm_capable && - link_state->clk_pm_enabled != policy_to_clkpm_state(pdev)) - pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev)); - + list_for_each_entry(link_state, &link_list, sibling) { + __pcie_aspm_configure_link_state(link_state, + policy_to_aspm_state(link_state)); + pcie_set_clkpm(link_state, policy_to_clkpm_state(link_state)); } mutex_unlock(&aspm_lock); up_read(&pci_bus_sem); @@ -838,7 +793,7 @@ static ssize_t link_state_show(struct device *dev, struct pci_dev *pci_device = to_pci_dev(dev); struct pcie_link_state *link_state = pci_device->link_state; - return sprintf(buf, "%d\n", link_state->enabled_state); + return sprintf(buf, "%d\n", link_state->aspm_enabled); } static ssize_t link_state_store(struct device *dev, @@ -846,7 +801,7 @@ static ssize_t link_state_store(struct device *dev, const char *buf, size_t n) { - struct pci_dev *pci_device = to_pci_dev(dev); + struct pci_dev *pdev = to_pci_dev(dev); int state; if (n < 1) @@ -854,7 +809,7 @@ static ssize_t link_state_store(struct device *dev, state = buf[0]-'0'; if (state >= 0 && state <= 3) { /* setup link aspm state */ - pcie_aspm_configure_link_state(pci_device, state); + pcie_aspm_configure_link_state(pdev->link_state, state); return n; } @@ -868,7 +823,7 @@ static ssize_t clk_ctl_show(struct device *dev, struct pci_dev *pci_device = to_pci_dev(dev); struct pcie_link_state *link_state = pci_device->link_state; - return sprintf(buf, "%d\n", link_state->clk_pm_enabled); + return sprintf(buf, "%d\n", link_state->clkpm_enabled); } static ssize_t clk_ctl_store(struct device *dev, @@ -876,7 +831,7 @@ static ssize_t clk_ctl_store(struct device *dev, const char *buf, size_t n) { - struct pci_dev *pci_device = to_pci_dev(dev); + struct pci_dev *pdev = to_pci_dev(dev); int state; if (n < 1) @@ -885,7 +840,7 @@ static ssize_t clk_ctl_store(struct device *dev, down_read(&pci_bus_sem); mutex_lock(&aspm_lock); - pcie_set_clock_pm(pci_device, !!state); + pcie_set_clkpm_nocheck(pdev->link_state, !!state); mutex_unlock(&aspm_lock); up_read(&pci_bus_sem); @@ -904,10 +859,10 @@ void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev) pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state) return; - if (link_state->support_state) + if (link_state->aspm_support) sysfs_add_file_to_group(&pdev->dev.kobj, &dev_attr_link_state.attr, power_group); - if (link_state->clk_pm_capable) + if (link_state->clkpm_capable) sysfs_add_file_to_group(&pdev->dev.kobj, &dev_attr_clk_ctl.attr, power_group); } @@ -920,10 +875,10 @@ void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev) pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state) return; - if (link_state->support_state) + if (link_state->aspm_support) sysfs_remove_file_from_group(&pdev->dev.kobj, &dev_attr_link_state.attr, power_group); - if (link_state->clk_pm_capable) + if (link_state->clkpm_capable) sysfs_remove_file_from_group(&pdev->dev.kobj, &dev_attr_clk_ctl.attr, power_group); } diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index f1ae2475ffff..40e75f6a5056 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -193,7 +193,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN; if (type == pci_bar_io) { l &= PCI_BASE_ADDRESS_IO_MASK; - mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff; + mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT; } else { l &= PCI_BASE_ADDRESS_MEM_MASK; mask = (u32)PCI_BASE_ADDRESS_MEM_MASK; @@ -237,6 +237,8 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, dev_printk(KERN_DEBUG, &dev->dev, "reg %x 64bit mmio: %pR\n", pos, res); } + + res->flags |= IORESOURCE_MEM_64; } else { sz = pci_size(l, sz, mask); @@ -287,7 +289,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) struct resource *res; int i; - if (!child->parent) /* It's a host bus, nothing to read */ + if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ return; if (dev->transparent) { @@ -362,7 +364,10 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) } } if (base <= limit) { - res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; + res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) | + IORESOURCE_MEM | IORESOURCE_PREFETCH; + if (res->flags & PCI_PREF_RANGE_TYPE_64) + res->flags |= IORESOURCE_MEM_64; res->start = base; res->end = limit + 0xfffff; dev_printk(KERN_DEBUG, &dev->dev, "bridge %sbit mmio pref: %pR\n", diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bd4253f93d5a..56552d74abea 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1133,6 +1133,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) switch (dev->subsystem_device) { case 0x1751: /* M2N notebook */ case 0x1821: /* M5N notebook */ + case 0x1897: /* A6L notebook */ asus_hides_smbus = 1; } else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) @@ -1163,6 +1164,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) switch (dev->subsystem_device) { case 0x12bc: /* HP D330L */ case 0x12bd: /* HP D530 */ + case 0x006a: /* HP Compaq nx9500 */ asus_hides_smbus = 1; } else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) @@ -2016,6 +2018,28 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5709S, quirk_brcm_570x_limit_vpd); +/* Originally in EDAC sources for i82875P: + * Intel tells BIOS developers to hide device 6 which + * configures the overflow device access containing + * the DRBs - this is where we expose device 6. + * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm + */ +static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev) +{ + u8 reg; + + if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { + dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n"); + pci_write_config_byte(dev, 0xF4, reg | 0x02); + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, + quirk_unhide_mch_dev6); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, + quirk_unhide_mch_dev6); + + #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 86503c14ce7e..176615e7231f 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -32,8 +32,6 @@ static void pci_stop_dev(struct pci_dev *dev) static void pci_destroy_dev(struct pci_dev *dev) { - pci_stop_dev(dev); - /* Remove the device from the device lists, and prevent any further * list accesses from this device */ down_write(&pci_bus_sem); diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 710d4ea69568..e8cb5051c311 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -29,7 +29,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev) if (pdev->is_pcie) return NULL; while (1) { - if (!pdev->bus->parent) + if (pci_is_root_bus(pdev->bus)) break; pdev = pdev->bus->self; /* a p2p bridge */ @@ -115,36 +115,6 @@ pci_find_next_bus(const struct pci_bus *from) #ifdef CONFIG_PCI_LEGACY /** - * pci_find_slot - locate PCI device from a given PCI slot - * @bus: number of PCI bus on which desired PCI device resides - * @devfn: encodes number of PCI slot in which the desired PCI - * device resides and the logical device number within that slot - * in case of multi-function devices. - * - * Given a PCI bus and slot/function number, the desired PCI device - * is located in system global list of PCI devices. If the device - * is found, a pointer to its data structure is returned. If no - * device is found, %NULL is returned. - * - * NOTE: Do not use this function any more; use pci_get_slot() instead, as - * the PCI device returned by this function can disappear at any moment in - * time. - */ -struct pci_dev *pci_find_slot(unsigned int bus, unsigned int devfn) -{ - struct pci_dev *dev = NULL; - - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - if (dev->bus->number == bus && dev->devfn == devfn) { - pci_dev_put(dev); - return dev; - } - } - return NULL; -} -EXPORT_SYMBOL(pci_find_slot); - -/** * pci_find_device - begin or continue searching for a PCI device by vendor/device id * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index a00f85471b6e..b636e245445d 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -58,7 +58,6 @@ static void pbus_assign_resources_sorted(const struct pci_bus *bus) res = list->res; idx = res - &list->dev->resource[0]; if (pci_assign_resource(list->dev, idx)) { - /* FIXME: get rid of this */ res->start = 0; res->end = 0; res->flags = 0; @@ -143,6 +142,7 @@ static void pci_setup_bridge(struct pci_bus *bus) struct pci_dev *bridge = bus->self; struct pci_bus_region region; u32 l, bu, lu, io_upper16; + int pref_mem64; if (pci_is_enabled(bridge)) return; @@ -198,16 +198,22 @@ static void pci_setup_bridge(struct pci_bus *bus) pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0); /* Set up PREF base/limit. */ + pref_mem64 = 0; bu = lu = 0; pcibios_resource_to_bus(bridge, ®ion, bus->resource[2]); if (bus->resource[2]->flags & IORESOURCE_PREFETCH) { + int width = 8; l = (region.start >> 16) & 0xfff0; l |= region.end & 0xfff00000; - bu = upper_32_bits(region.start); - lu = upper_32_bits(region.end); - dev_info(&bridge->dev, " PREFETCH window: %#016llx-%#016llx\n", - (unsigned long long)region.start, - (unsigned long long)region.end); + if (bus->resource[2]->flags & IORESOURCE_MEM_64) { + pref_mem64 = 1; + bu = upper_32_bits(region.start); + lu = upper_32_bits(region.end); + width = 16; + } + dev_info(&bridge->dev, " PREFETCH window: %#0*llx-%#0*llx\n", + width, (unsigned long long)region.start, + width, (unsigned long long)region.end); } else { l = 0x0000fff0; @@ -215,9 +221,11 @@ static void pci_setup_bridge(struct pci_bus *bus) } pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l); - /* Set the upper 32 bits of PREF base & limit. */ - pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu); - pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu); + if (pref_mem64) { + /* Set the upper 32 bits of PREF base & limit. */ + pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu); + pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu); + } pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl); } @@ -255,8 +263,25 @@ static void pci_bridge_check_ranges(struct pci_bus *bus) pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem); pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0); } - if (pmem) + if (pmem) { b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH; + if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) + b_res[2].flags |= IORESOURCE_MEM_64; + } + + /* double check if bridge does support 64 bit pref */ + if (b_res[2].flags & IORESOURCE_MEM_64) { + u32 mem_base_hi, tmp; + pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, + &mem_base_hi); + pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, + 0xffffffff); + pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp); + if (!tmp) + b_res[2].flags &= ~IORESOURCE_MEM_64; + pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, + mem_base_hi); + } } /* Helper function for sizing routines: find first available @@ -336,6 +361,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */ int order, max_order; struct resource *b_res = find_free_bus_resource(bus, type); + unsigned int mem64_mask = 0; if (!b_res) return 0; @@ -344,9 +370,12 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long max_order = 0; size = 0; + mem64_mask = b_res->flags & IORESOURCE_MEM_64; + b_res->flags &= ~IORESOURCE_MEM_64; + list_for_each_entry(dev, &bus->devices, bus_list) { int i; - + for (i = 0; i < PCI_NUM_RESOURCES; i++) { struct resource *r = &dev->resource[i]; resource_size_t r_size; @@ -372,6 +401,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long aligns[order] += align; if (order > max_order) max_order = order; + mem64_mask &= r->flags & IORESOURCE_MEM_64; } } @@ -396,6 +426,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long b_res->start = min_align; b_res->end = size + min_align - 1; b_res->flags |= IORESOURCE_STARTALIGN; + b_res->flags |= mem64_mask; return 1; } diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 12403516776a..b711fb7181e2 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -135,23 +135,16 @@ void pci_disable_bridge_window(struct pci_dev *dev) } #endif /* CONFIG_PCI_QUIRKS */ -int pci_assign_resource(struct pci_dev *dev, int resno) +static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev, + int resno) { - struct pci_bus *bus = dev->bus; struct resource *res = dev->resource + resno; resource_size_t size, min, align; int ret; size = resource_size(res); min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM; - align = resource_alignment(res); - if (!align) { - dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus " - "alignment) %pR flags %#lx\n", - resno, res, res->flags); - return -EINVAL; - } /* First, try exact prefetching match.. */ ret = pci_bus_alloc_resource(bus, res, size, align, min, @@ -169,10 +162,7 @@ int pci_assign_resource(struct pci_dev *dev, int resno) pcibios_align_resource, dev); } - if (ret) { - dev_info(&dev->dev, "BAR %d: can't allocate %s resource %pR\n", - resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res); - } else { + if (!ret) { res->flags &= ~IORESOURCE_STARTALIGN; if (resno < PCI_BRIDGE_RESOURCES) pci_update_resource(dev, resno); @@ -181,6 +171,39 @@ int pci_assign_resource(struct pci_dev *dev, int resno) return ret; } +int pci_assign_resource(struct pci_dev *dev, int resno) +{ + struct resource *res = dev->resource + resno; + resource_size_t align; + struct pci_bus *bus; + int ret; + + align = resource_alignment(res); + if (!align) { + dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus " + "alignment) %pR flags %#lx\n", + resno, res, res->flags); + return -EINVAL; + } + + bus = dev->bus; + while ((ret = __pci_assign_resource(bus, dev, resno))) { + if (bus->parent && bus->self->transparent) + bus = bus->parent; + else + bus = NULL; + if (bus) + continue; + break; + } + + if (ret) + dev_info(&dev->dev, "BAR %d: can't allocate %s resource %pR\n", + resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res); + + return ret; +} + #if 0 int pci_assign_resource_fixed(struct pci_dev *dev, int resno) { diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index fe95ce20bcbd..eddb0748b0ea 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -307,6 +307,45 @@ void pci_destroy_slot(struct pci_slot *slot) } EXPORT_SYMBOL_GPL(pci_destroy_slot); +#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE) +#include <linux/pci_hotplug.h> +/** + * pci_hp_create_link - create symbolic link to the hotplug driver module. + * @slot: struct pci_slot + * + * Helper function for pci_hotplug_core.c to create symbolic link to + * the hotplug driver module. + */ +void pci_hp_create_module_link(struct pci_slot *pci_slot) +{ + struct hotplug_slot *slot = pci_slot->hotplug; + struct kobject *kobj = NULL; + int no_warn; + + if (!slot || !slot->ops) + return; + kobj = kset_find_obj(module_kset, slot->ops->mod_name); + if (!kobj) + return; + no_warn = sysfs_create_link(&pci_slot->kobj, kobj, "module"); + kobject_put(kobj); +} +EXPORT_SYMBOL_GPL(pci_hp_create_module_link); + +/** + * pci_hp_remove_link - remove symbolic link to the hotplug driver module. + * @slot: struct pci_slot + * + * Helper function for pci_hotplug_core.c to remove symbolic link to + * the hotplug driver module. + */ +void pci_hp_remove_module_link(struct pci_slot *pci_slot) +{ + sysfs_remove_link(&pci_slot->kobj, "module"); +} +EXPORT_SYMBOL_GPL(pci_hp_remove_module_link); +#endif + static int pci_slot_init(void) { struct kset *pci_bus_kset; diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 32e4b2f72294..786e7b8cece9 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -49,6 +49,8 @@ struct resource_list { #define IORESOURCE_SIZEALIGN 0x00020000 /* size indicates alignment */ #define IORESOURCE_STARTALIGN 0x00040000 /* start field is alignment */ +#define IORESOURCE_MEM_64 0x00100000 + #define IORESOURCE_EXCLUSIVE 0x08000000 /* Userland may not map this resource */ #define IORESOURCE_DISABLED 0x10000000 #define IORESOURCE_UNSET 0x20000000 diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 092e82e0048c..93a7c08f869d 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -15,7 +15,7 @@ static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { struct pci_bus *pbus = pdev->bus; /* Find a PCI root bus */ - while (pbus->parent) + while (!pci_is_root_bus(pbus)) pbus = pbus->parent; return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus), pbus->number); @@ -23,7 +23,7 @@ static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus) { - if (pbus->parent) + if (!pci_is_root_bus(pbus)) return DEVICE_ACPI_HANDLE(&(pbus->self->dev)); return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus), pbus->number); diff --git a/include/linux/pci.h b/include/linux/pci.h index 8e366bb0705f..1365c745bdb7 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -607,8 +607,6 @@ extern void pci_sort_breadthfirst(void); struct pci_dev __deprecated *pci_find_device(unsigned int vendor, unsigned int device, struct pci_dev *from); -struct pci_dev __deprecated *pci_find_slot(unsigned int bus, - unsigned int devfn); #endif /* CONFIG_PCI_LEGACY */ enum pci_lost_interrupt_reason { @@ -647,6 +645,7 @@ int pci_bus_write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val); int pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val); +struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops); static inline int pci_read_config_byte(struct pci_dev *dev, int where, u8 *val) { @@ -711,8 +710,8 @@ int pcix_get_mmrbc(struct pci_dev *dev); int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc); int pcie_get_readrq(struct pci_dev *dev); int pcie_set_readrq(struct pci_dev *dev, int rq); +int __pci_reset_function(struct pci_dev *dev); int pci_reset_function(struct pci_dev *dev); -int pci_execute_reset_function(struct pci_dev *dev); void pci_update_resource(struct pci_dev *dev, int resno); int __must_check pci_assign_resource(struct pci_dev *dev, int i); int pci_select_bars(struct pci_dev *dev, unsigned long flags); @@ -732,7 +731,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); bool pci_pme_capable(struct pci_dev *dev, pci_power_t state); void pci_pme_active(struct pci_dev *dev, bool enable); -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable); +int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable); int pci_wake_from_d3(struct pci_dev *dev, bool enable); pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); @@ -798,7 +797,7 @@ const struct pci_device_id *pci_match_id(const struct pci_device_id *ids, int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass); -void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *), +void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata); int pci_cfg_space_size_ext(struct pci_dev *dev); int pci_cfg_space_size(struct pci_dev *dev); @@ -888,6 +887,17 @@ static inline int pcie_aspm_enabled(void) extern int pcie_aspm_enabled(void); #endif +#ifndef CONFIG_PCIE_ECRC +static inline void pcie_set_ecrc_checking(struct pci_dev *dev) +{ + return; +} +static inline void pcie_ecrc_get_policy(char *str) {}; +#else +extern void pcie_set_ecrc_checking(struct pci_dev *dev); +extern void pcie_ecrc_get_policy(char *str); +#endif + #define pci_enable_msi(pdev) pci_enable_msi_block(pdev, 1) #ifdef CONFIG_HT_IRQ @@ -944,12 +954,6 @@ static inline struct pci_dev *pci_find_device(unsigned int vendor, return NULL; } -static inline struct pci_dev *pci_find_slot(unsigned int bus, - unsigned int devfn) -{ - return NULL; -} - static inline struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device, struct pci_dev *from) @@ -1105,6 +1109,10 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus, #include <asm/pci.h> +#ifndef PCIBIOS_MAX_MEM_32 +#define PCIBIOS_MAX_MEM_32 (-1) +#endif + /* these helpers provide future and backwards compatibility * for accessing popular PCI BAR info */ #define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) @@ -1261,5 +1269,10 @@ static inline irqreturn_t pci_sriov_migration(struct pci_dev *dev) } #endif +#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE) +extern void pci_hp_create_module_link(struct pci_slot *pci_slot); +extern void pci_hp_remove_module_link(struct pci_slot *pci_slot); +#endif + #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 20998746518e..b3646cd7fd5a 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -66,17 +66,10 @@ enum pcie_link_speed { PCIE_LNK_SPEED_UNKNOWN = 0xFF, }; -struct hotplug_slot; -struct hotplug_slot_attribute { - struct attribute attr; - ssize_t (*show)(struct hotplug_slot *, char *); - ssize_t (*store)(struct hotplug_slot *, const char *, size_t); -}; -#define to_hotplug_attr(n) container_of(n, struct hotplug_slot_attribute, attr); - /** * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use * @owner: The module owner of this structure + * @mod_name: The module name (KBUILD_MODNAME) of this structure * @enable_slot: Called when the user wants to enable a specific pci slot * @disable_slot: Called when the user wants to disable a specific pci slot * @set_attention_status: Called to set the specific slot's attention LED to @@ -109,6 +102,7 @@ struct hotplug_slot_attribute { */ struct hotplug_slot_ops { struct module *owner; + const char *mod_name; int (*enable_slot) (struct hotplug_slot *slot); int (*disable_slot) (struct hotplug_slot *slot); int (*set_attention_status) (struct hotplug_slot *slot, u8 value); @@ -167,12 +161,21 @@ static inline const char *hotplug_slot_name(const struct hotplug_slot *slot) return pci_slot_name(slot->pci_slot); } -extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr, - const char *name); +extern int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *pbus, + int nr, const char *name, + struct module *owner, const char *mod_name); extern int pci_hp_deregister(struct hotplug_slot *slot); extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot, struct hotplug_slot_info *info); +static inline int pci_hp_register(struct hotplug_slot *slot, + struct pci_bus *pbus, + int devnr, const char *name) +{ + return __pci_hp_register(slot, pbus, devnr, name, + THIS_MODULE, KBUILD_MODNAME); +} + /* PCI Setting Record (Type 0) */ struct hpp_type0 { u32 revision; diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 616bf8b3c8b5..83b02f5a25b2 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -295,8 +295,9 @@ #define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ #define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ #define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ +#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ #define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ -#define PCI_MSI_MASK_BIT 16 /* Mask bits register */ +#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ /* MSI-X registers (these are at offset PCI_MSIX_FLAGS) */ #define PCI_MSIX_FLAGS 2 @@ -304,7 +305,6 @@ #define PCI_MSIX_FLAGS_ENABLE (1 << 15) #define PCI_MSIX_FLAGS_MASKALL (1 << 14) #define PCI_MSIX_FLAGS_BIRMASK (7 << 0) -#define PCI_MSIX_FLAGS_BITMASK (1 << 0) /* CompactPCI Hotswap Register */ |