summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mmc/mmci.txt54
-rw-r--r--arch/arm/boot/dts/ste-ccu9540.dts6
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi19
-rw-r--r--arch/arm/boot/dts/ste-nomadik-stn8815.dtsi4
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts4
-rw-r--r--arch/arm/boot/dts/ste-u300.dts4
-rw-r--r--arch/arm/mach-lpc32xx/phy3250.c3
-rw-r--r--arch/arm/mach-ux500/Makefile3
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c166
-rw-r--r--arch/arm/mach-ux500/board-mop500.h5
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c4
-rw-r--r--drivers/mmc/host/mmci.c324
-rw-r--r--drivers/mmc/host/mmci.h14
-rw-r--r--include/linux/amba/mmci.h42
14 files changed, 169 insertions, 483 deletions
diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
index 2b584cae352a..03796cf2d3e7 100644
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -4,12 +4,58 @@ The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
reading and writing to MultiMedia and SD cards alike.
This file documents differences between the core properties described
-by mmc.txt and the properties used by the mmci driver.
+by mmc.txt and the properties used by the mmci driver. Using "st" as
+the prefix for a property, indicates support by the ST Micro variant.
Required properties:
- compatible : contains "arm,pl18x", "arm,primecell".
-- arm,primecell-periphid : contains the PrimeCell Peripheral ID.
+- vmmc-supply : phandle to the regulator device tree node, mentioned
+ as the VCC/VDD supply in the eMMC/SD specs.
Optional properties:
-- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable
-- mmc-cap-sd-highspeed : indicates whether SD is high speed capable
+- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
+ the ID provided by the HW
+- vqmmc-supply : phandle to the regulator device tree node, mentioned
+ as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+- st,sig-dir-dat0 : bus signal direction pin used for DAT[0].
+- st,sig-dir-dat2 : bus signal direction pin used for DAT[2].
+- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1].
+- st,sig-dir-dat74 : bus signal direction pin used for DAT[4] to DAT[7].
+- st,sig-dir-cmd : cmd signal direction pin used for CMD.
+- st,sig-pin-fbclk : feedback clock signal pin used.
+
+Deprecated properties:
+- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable.
+- mmc-cap-sd-highspeed : indicates whether SD is high speed capable.
+
+Example:
+
+sdi0_per1@80126000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80126000 0x1000>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+ <&dma 29 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+ clock-names = "sdi", "apb_pclk";
+
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cd-gpios = <&gpio2 31 0x4>; // 95
+ st,sig-dir-dat0;
+ st,sig-dir-dat2;
+ st,sig-dir-cmd;
+ st,sig-pin-fbclk;
+
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&vmmci>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi0_default_mode>;
+ pinctrl-1 = <&sdi0_sleep_mode>;
+};
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index 229508750890..651c56d400a4 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -38,8 +38,8 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
- mmc-cap-sd-highspeed;
- mmc-cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
cd-gpios = <&gpio7 6 0x4>; // 230
@@ -63,7 +63,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
status = "okay";
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 6cb9b68e2188..bf8f0eddc2c0 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -116,8 +116,15 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
- mmc-cap-sd-highspeed;
- mmc-cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ full-pwr-cycle;
+ st,sig-dir-dat0;
+ st,sig-dir-dat2;
+ st,sig-dir-cmd;
+ st,sig-pin-fbclk;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
@@ -132,6 +139,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
+ non-removable;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi1_default_mode>;
pinctrl-1 = <&sdi1_sleep_mode>;
@@ -144,7 +152,9 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
+ non-removable;
+ vmmc-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi2_default_mode>;
pinctrl-1 = <&sdi2_sleep_mode>;
@@ -157,7 +167,8 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
+ non-removable;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi4_default_mode>;
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 5acc0449676a..d316c955bd5f 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -840,8 +840,8 @@
interrupts = <22>;
max-frequency = <48000000>;
bus-width = <4>;
- mmc-cap-mmc-highspeed;
- mmc-cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
cd-gpios = <&gpio3 15 0x1>;
cd-inverted;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index a2f632d0be2a..474ef83229cd 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -156,7 +156,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
@@ -195,7 +195,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi4_default_mode>;
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 6fe688e9e4da..82a661677e97 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -442,8 +442,8 @@
clock-names = "apb_pclk", "mclk";
max-frequency = <24000000>;
bus-width = <4>; // SD-card slot
- mmc-cap-mmc-highspeed;
- mmc-cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
cd-gpios = <&gpio 12 0x4>;
cd-inverted;
vmmc-supply = <&ab3100_ldo_g_reg>;
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 34932e0e31fa..7858d5b6f6ce 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -202,9 +202,6 @@ static struct mmci_platform_data lpc32xx_mmci_data = {
.ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.ios_handler = mmc_handle_ios,
- .dma_filter = NULL,
- /* No DMA for now since AMBA PL080 dmaengine driver only does scatter
- * gather, and the MMCI driver doesn't do it this way */
};
static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index de544aabf292..9741de956b3e 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,8 +5,7 @@
obj-y := cpu.o id.o timer.o pm.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500) += board-mop500-sdi.o \
- board-mop500-regulators.o \
+obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \
board-mop500-audio.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
deleted file mode 100644
index fcbf3a13a539..000000000000
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <asm/mach-types.h>
-
-#include "db8500-regs.h"
-#include "board-mop500.h"
-#include "ste-dma40-db8500.h"
-
-/*
- * v2 has a new version of this block that need to be forced, the number found
- * in hardware is incorrect
- */
-#define U8500_SDI_V2_PERIPHID 0x10480180
-
-/*
- * SDI 0 (MicroSD slot)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_DEV_TO_MEM,
- .dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-
-static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_MEM_TO_DEV,
- .dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi0_data = {
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA |
- MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_ERASE |
- MMC_CAP_UHS_SDR12 |
- MMC_CAP_UHS_SDR25,
- .gpio_wp = -1,
- .sigdir = MCI_ST_FBCLKEN |
- MCI_ST_CMDDIREN |
- MCI_ST_DATA0DIREN |
- MCI_ST_DATA2DIREN,
-#ifdef CONFIG_STE_DMA40
- .dma_filter = stedma40_filter,
- .dma_rx_param = &mop500_sdi0_dma_cfg_rx,
- .dma_tx_param = &mop500_sdi0_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI1 (SDIO WLAN)
- */
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_DEV_TO_MEM,
- .dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-
-static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_MEM_TO_DEV,
- .dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi1_data = {
- .ocr_mask = MMC_VDD_29_30,
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA |
- MMC_CAP_NONREMOVABLE,
- .gpio_cd = -1,
- .gpio_wp = -1,
-#ifdef CONFIG_STE_DMA40
- .dma_filter = stedma40_filter,
- .dma_rx_param = &sdi1_dma_cfg_rx,
- .dma_tx_param = &sdi1_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 2 (POP eMMC, not on DB8500ed)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_DEV_TO_MEM,
- .dev_type = DB8500_DMA_DEV28_SD_MM2,
-};
-
-static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_MEM_TO_DEV,
- .dev_type = DB8500_DMA_DEV28_SD_MM2,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi2_data = {
- .ocr_mask = MMC_VDD_165_195,
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NONREMOVABLE |
- MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_ERASE |
- MMC_CAP_CMD23,
- .gpio_cd = -1,
- .gpio_wp = -1,
-#ifdef CONFIG_STE_DMA40
- .dma_filter = stedma40_filter,
- .dma_rx_param = &mop500_sdi2_dma_cfg_rx,
- .dma_tx_param = &mop500_sdi2_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 4 (on-board eMMC)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_DEV_TO_MEM,
- .dev_type = DB8500_DMA_DEV42_SD_MM4,
-};
-
-static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_MEM_TO_DEV,
- .dev_type = DB8500_DMA_DEV42_SD_MM4,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi4_data = {
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NONREMOVABLE |
- MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_ERASE |
- MMC_CAP_CMD23,
- .gpio_cd = -1,
- .gpio_wp = -1,
-#ifdef CONFIG_STE_DMA40
- .dma_filter = stedma40_filter,
- .dma_rx_param = &mop500_sdi4_dma_cfg_rx,
- .dma_tx_param = &mop500_sdi4_dma_cfg_tx,
-#endif
-};
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 32cc0d8d8a0e..7c7b0adca582 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -8,12 +8,7 @@
#define __BOARD_MOP500_H
#include <linux/platform_data/asoc-ux500-msp.h>
-#include <linux/amba/mmci.h>
-extern struct mmci_platform_data mop500_sdi0_data;
-extern struct mmci_platform_data mop500_sdi1_data;
-extern struct mmci_platform_data mop500_sdi2_data;
-extern struct mmci_platform_data mop500_sdi4_data;
extern struct msp_i2s_platform_data msp0_platform_data;
extern struct msp_i2s_platform_data msp1_platform_data;
extern struct msp_i2s_platform_data msp2_platform_data;
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 8820f602fcd2..fa308f07fae5 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -146,10 +146,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
- OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 771c60ab4a32..a084edd37af5 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -23,6 +24,7 @@
#include <linux/mmc/pm.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/slot-gpio.h>
#include <linux/amba/bus.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
@@ -364,7 +366,6 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
#ifdef CONFIG_DMA_ENGINE
static void mmci_dma_setup(struct mmci_host *host)
{
- struct mmci_platform_data *plat = host->plat;
const char *rxname, *txname;
dma_cap_mask_t mask;
@@ -378,25 +379,6 @@ static void mmci_dma_setup(struct mmci_host *host)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- if (plat && plat->dma_filter) {
- if (!host->dma_rx_channel && plat->dma_rx_param) {
- host->dma_rx_channel = dma_request_channel(mask,
- plat->dma_filter,
- plat->dma_rx_param);
- /* E.g if no DMA hardware is present */
- if (!host->dma_rx_channel)
- dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
- }
-
- if (!host->dma_tx_channel && plat->dma_tx_param) {
- host->dma_tx_channel = dma_request_channel(mask,
- plat->dma_filter,
- plat->dma_tx_param);
- if (!host->dma_tx_channel)
- dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
- }
- }
-
/*
* If only an RX channel is specified, the driver will
* attempt to use it bidirectionally, however if it is
@@ -444,11 +426,9 @@ static void mmci_dma_setup(struct mmci_host *host)
*/
static inline void mmci_dma_release(struct mmci_host *host)
{
- struct mmci_platform_data *plat = host->plat;
-
if (host->dma_rx_channel)
dma_release_channel(host->dma_rx_channel);
- if (host->dma_tx_channel && plat->dma_tx_param)
+ if (host->dma_tx_channel)
dma_release_channel(host->dma_tx_channel);
host->dma_rx_channel = host->dma_tx_channel = NULL;
}
@@ -1285,7 +1265,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
* indicating signal direction for the signals in
* the SD/MMC bus and feedback-clock usage.
*/
- pwr |= host->plat->sigdir;
+ pwr |= host->pwr_reg_add;
if (ios->bus_width == MMC_BUS_WIDTH_4)
pwr &= ~MCI_ST_DATA74DIREN;
@@ -1326,35 +1306,18 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
pm_runtime_put_autosuspend(mmc_dev(mmc));
}
-static int mmci_get_ro(struct mmc_host *mmc)
-{
- struct mmci_host *host = mmc_priv(mmc);
-
- if (host->gpio_wp == -ENOSYS)
- return -ENOSYS;
-
- return gpio_get_value_cansleep(host->gpio_wp);
-}
-
static int mmci_get_cd(struct mmc_host *mmc)
{
struct mmci_host *host = mmc_priv(mmc);
struct mmci_platform_data *plat = host->plat;
- unsigned int status;
+ unsigned int status = mmc_gpio_get_cd(mmc);
- if (host->gpio_cd == -ENOSYS) {
+ if (status == -ENOSYS) {
if (!plat->status)
return 1; /* Assume always present */
status = plat->status(mmc_dev(host->mmc));
- } else
- status = !!gpio_get_value_cansleep(host->gpio_cd)
- ^ plat->cd_invert;
-
- /*
- * Use positive logic throughout - status is zero for no card,
- * non-zero for card inserted.
- */
+ }
return status;
}
@@ -1391,70 +1354,44 @@ static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
return ret;
}
-static irqreturn_t mmci_cd_irq(int irq, void *dev_id)
-{
- struct mmci_host *host = dev_id;
-
- mmc_detect_change(host->mmc, msecs_to_jiffies(500));
-
- return IRQ_HANDLED;
-}
-
static struct mmc_host_ops mmci_ops = {
.request = mmci_request,
.pre_req = mmci_pre_request,
.post_req = mmci_post_request,
.set_ios = mmci_set_ios,
- .get_ro = mmci_get_ro,
+ .get_ro = mmc_gpio_get_ro,
.get_cd = mmci_get_cd,
.start_signal_voltage_switch = mmci_sig_volt_switch,
};
-#ifdef CONFIG_OF
-static void mmci_dt_populate_generic_pdata(struct device_node *np,
- struct mmci_platform_data *pdata)
+static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc)
{
- int bus_width = 0;
-
- pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
- pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
+ struct mmci_host *host = mmc_priv(mmc);
+ int ret = mmc_of_parse(mmc);
- if (of_get_property(np, "cd-inverted", NULL))
- pdata->cd_invert = true;
- else
- pdata->cd_invert = false;
+ if (ret)
+ return ret;
- of_property_read_u32(np, "max-frequency", &pdata->f_max);
- if (!pdata->f_max)
- pr_warn("%s has no 'max-frequency' property\n", np->full_name);
+ if (of_get_property(np, "st,sig-dir-dat0", NULL))
+ host->pwr_reg_add |= MCI_ST_DATA0DIREN;
+ if (of_get_property(np, "st,sig-dir-dat2", NULL))
+ host->pwr_reg_add |= MCI_ST_DATA2DIREN;
+ if (of_get_property(np, "st,sig-dir-dat31", NULL))
+ host->pwr_reg_add |= MCI_ST_DATA31DIREN;
+ if (of_get_property(np, "st,sig-dir-dat74", NULL))
+ host->pwr_reg_add |= MCI_ST_DATA74DIREN;
+ if (of_get_property(np, "st,sig-dir-cmd", NULL))
+ host->pwr_reg_add |= MCI_ST_CMDDIREN;
+ if (of_get_property(np, "st,sig-pin-fbclk", NULL))
+ host->pwr_reg_add |= MCI_ST_FBCLKEN;
if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL))
- pdata->capabilities |= MMC_CAP_MMC_HIGHSPEED;
+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
if (of_get_property(np, "mmc-cap-sd-highspeed", NULL))
- pdata->capabilities |= MMC_CAP_SD_HIGHSPEED;
+ mmc->caps |= MMC_CAP_SD_HIGHSPEED;
- of_property_read_u32(np, "bus-width", &bus_width);
- switch (bus_width) {
- case 0 :
- /* No bus-width supplied. */
- break;
- case 4 :
- pdata->capabilities |= MMC_CAP_4_BIT_DATA;
- break;
- case 8 :
- pdata->capabilities |= MMC_CAP_8_BIT_DATA;
- break;
- default :
- pr_warn("%s: Unsupported bus width\n", np->full_name);
- }
-}
-#else
-static void mmci_dt_populate_generic_pdata(struct device_node *np,
- struct mmci_platform_data *pdata)
-{
- return;
+ return 0;
}
-#endif
static int mmci_probe(struct amba_device *dev,
const struct amba_id *id)
@@ -1478,26 +1415,17 @@ static int mmci_probe(struct amba_device *dev,
return -ENOMEM;
}
- if (np)
- mmci_dt_populate_generic_pdata(np, plat);
+ mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev);
+ if (!mmc)
+ return -ENOMEM;
- ret = amba_request_regions(dev, DRIVER_NAME);
+ ret = mmci_of_parse(np, mmc);
if (ret)
- goto out;
-
- mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev);
- if (!mmc) {
- ret = -ENOMEM;
- goto rel_regions;
- }
+ goto host_free;
host = mmc_priv(mmc);
host->mmc = mmc;
- host->gpio_wp = -ENOSYS;
- host->gpio_cd = -ENOSYS;
- host->gpio_cd_irq = -1;
-
host->hw_designer = amba_manf(dev);
host->hw_revision = amba_rev(dev);
dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
@@ -1529,10 +1457,11 @@ static int mmci_probe(struct amba_device *dev,
dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
host->mclk);
}
+
host->phybase = dev->res.start;
- host->base = ioremap(dev->res.start, resource_size(&dev->res));
- if (!host->base) {
- ret = -ENOMEM;
+ host->base = devm_ioremap_resource(&dev->dev, &dev->res);
+ if (IS_ERR(host->base)) {
+ ret = PTR_ERR(host->base);
goto clk_disable;
}
@@ -1546,15 +1475,13 @@ static int mmci_probe(struct amba_device *dev,
else
mmc->f_min = DIV_ROUND_UP(host->mclk, 512);
/*
- * If the platform data supplies a maximum operating
- * frequency, this takes precedence. Else, we fall back
- * to using the module parameter, which has a (low)
- * default value in case it is not specified. Either
- * value must not exceed the clock rate into the block,
- * of course.
+ * If no maximum operating frequency is supplied, fall back to use
+ * the module parameter, which has a (low) default value in case it
+ * is not specified. Either value must not exceed the clock rate into
+ * the block, of course.
*/
- if (plat->f_max)
- mmc->f_max = min(host->mclk, plat->f_max);
+ if (mmc->f_max)
+ mmc->f_max = min(host->mclk, mmc->f_max);
else
mmc->f_max = min(host->mclk, fmax);
dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
@@ -1566,8 +1493,15 @@ static int mmci_probe(struct amba_device *dev,
else if (plat->ocr_mask)
dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
- mmc->caps = plat->capabilities;
- mmc->caps2 = plat->capabilities2;
+ /* DT takes precedence over platform data. */
+ if (!np) {
+ if (!plat->cd_invert)
+ mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+ mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+ }
+
+ /* We support these capabilities. */
+ mmc->caps |= MMC_CAP_CMD23;
if (variant->busy_detect) {
mmci_ops.card_busy = mmci_card_busy;
@@ -1579,7 +1513,7 @@ static int mmci_probe(struct amba_device *dev,
mmc->ops = &mmci_ops;
/* We support these PM capabilities. */
- mmc->pm_caps = MMC_PM_KEEP_POWER;
+ mmc->pm_caps |= MMC_PM_KEEP_POWER;
/*
* We can do SGIO
@@ -1616,62 +1550,30 @@ static int mmci_probe(struct amba_device *dev,
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
- if (plat->gpio_cd == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto err_gpio_cd;
- }
- if (gpio_is_valid(plat->gpio_cd)) {
- ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
- if (ret == 0)
- ret = gpio_direction_input(plat->gpio_cd);
- if (ret == 0)
- host->gpio_cd = plat->gpio_cd;
- else if (ret != -ENOSYS)
- goto err_gpio_cd;
-
- /*
- * A gpio pin that will detect cards when inserted and removed
- * will most likely want to trigger on the edges if it is
- * 0 when ejected and 1 when inserted (or mutatis mutandis
- * for the inverted case) so we request triggers on both
- * edges.
- */
- ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd),
- mmci_cd_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- DRIVER_NAME " (cd)", host);
- if (ret >= 0)
- host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
- }
- if (plat->gpio_wp == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto err_gpio_wp;
+ /* If DT, cd/wp gpios must be supplied through it. */
+ if (!np && gpio_is_valid(plat->gpio_cd)) {
+ ret = mmc_gpio_request_cd(mmc, plat->gpio_cd, 0);
+ if (ret)
+ goto clk_disable;
}
- if (gpio_is_valid(plat->gpio_wp)) {
- ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
- if (ret == 0)
- ret = gpio_direction_input(plat->gpio_wp);
- if (ret == 0)
- host->gpio_wp = plat->gpio_wp;
- else if (ret != -ENOSYS)
- goto err_gpio_wp;
+ if (!np && gpio_is_valid(plat->gpio_wp)) {
+ ret = mmc_gpio_request_ro(mmc, plat->gpio_wp);
+ if (ret)
+ goto clk_disable;
}
- if ((host->plat->status || host->gpio_cd != -ENOSYS)
- && host->gpio_cd_irq < 0)
- mmc->caps |= MMC_CAP_NEEDS_POLL;
-
- ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
+ ret = devm_request_irq(&dev->dev, dev->irq[0], mmci_irq, IRQF_SHARED,
+ DRIVER_NAME " (cmd)", host);
if (ret)
- goto unmap;
+ goto clk_disable;
if (!dev->irq[1])
host->singleirq = true;
else {
- ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,
- DRIVER_NAME " (pio)", host);
+ ret = devm_request_irq(&dev->dev, dev->irq[1], mmci_pio_irq,
+ IRQF_SHARED, DRIVER_NAME " (pio)", host);
if (ret)
- goto irq0_free;
+ goto clk_disable;
}
writel(MCI_IRQENABLE, host->base + MMCIMASK0);
@@ -1693,25 +1595,10 @@ static int mmci_probe(struct amba_device *dev,
return 0;
- irq0_free:
- free_irq(dev->irq[0], host);
- unmap:
- if (host->gpio_wp != -ENOSYS)
- gpio_free(host->gpio_wp);
- err_gpio_wp:
- if (host->gpio_cd_irq >= 0)
- free_irq(host->gpio_cd_irq, host);
- if (host->gpio_cd != -ENOSYS)
- gpio_free(host->gpio_cd);
- err_gpio_cd:
- iounmap(host->base);
clk_disable:
clk_disable_unprepare(host->clk);
host_free:
mmc_free_host(mmc);
- rel_regions:
- amba_release_regions(dev);
- out:
return ret;
}
@@ -1737,92 +1624,46 @@ static int mmci_remove(struct amba_device *dev)
writel(0, host->base + MMCIDATACTRL);
mmci_dma_release(host);
- free_irq(dev->irq[0], host);
- if (!host->singleirq)
- free_irq(dev->irq[1], host);
-
- if (host->gpio_wp != -ENOSYS)
- gpio_free(host->gpio_wp);
- if (host->gpio_cd_irq >= 0)
- free_irq(host->gpio_cd_irq, host);
- if (host->gpio_cd != -ENOSYS)
- gpio_free(host->gpio_cd);
-
- iounmap(host->base);
clk_disable_unprepare(host->clk);
-
mmc_free_host(mmc);
-
- amba_release_regions(dev);
- }
-
- return 0;
-}
-
-#ifdef CONFIG_SUSPEND
-static int mmci_suspend(struct device *dev)
-{
- struct amba_device *adev = to_amba_device(dev);
- struct mmc_host *mmc = amba_get_drvdata(adev);
-
- if (mmc) {
- struct mmci_host *host = mmc_priv(mmc);
- pm_runtime_get_sync(dev);
- writel(0, host->base + MMCIMASK0);
}
return 0;
}
-static int mmci_resume(struct device *dev)
-{
- struct amba_device *adev = to_amba_device(dev);
- struct mmc_host *mmc = amba_get_drvdata(adev);
-
- if (mmc) {
- struct mmci_host *host = mmc_priv(mmc);
- writel(MCI_IRQENABLE, host->base + MMCIMASK0);
- pm_runtime_put(dev);
- }
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static void mmci_save(struct mmci_host *host)
{
unsigned long flags;
- if (host->variant->pwrreg_nopower) {
- spin_lock_irqsave(&host->lock, flags);
+ spin_lock_irqsave(&host->lock, flags);
- writel(0, host->base + MMCIMASK0);
+ writel(0, host->base + MMCIMASK0);
+ if (host->variant->pwrreg_nopower) {
writel(0, host->base + MMCIDATACTRL);
writel(0, host->base + MMCIPOWER);
writel(0, host->base + MMCICLOCK);
- mmci_reg_delay(host);
-
- spin_unlock_irqrestore(&host->lock, flags);
}
+ mmci_reg_delay(host);
+ spin_unlock_irqrestore(&host->lock, flags);
}
static void mmci_restore(struct mmci_host *host)
{
unsigned long flags;
- if (host->variant->pwrreg_nopower) {
- spin_lock_irqsave(&host->lock, flags);
+ spin_lock_irqsave(&host->lock, flags);
+ if (host->variant->pwrreg_nopower) {
writel(host->clk_reg, host->base + MMCICLOCK);
writel(host->datactrl_reg, host->base + MMCIDATACTRL);
writel(host->pwr_reg, host->base + MMCIPOWER);
- writel(MCI_IRQENABLE, host->base + MMCIMASK0);
- mmci_reg_delay(host);
-
- spin_unlock_irqrestore(&host->lock, flags);
}
+ writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+ mmci_reg_delay(host);
+
+ spin_unlock_irqrestore(&host->lock, flags);
}
static int mmci_runtime_suspend(struct device *dev)
@@ -1857,8 +1698,9 @@ static int mmci_runtime_resume(struct device *dev)
#endif
static const struct dev_pm_ops mmci_dev_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(mmci_suspend, mmci_resume)
- SET_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_PM_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL)
};
static struct amba_id mmci_ids[] = {
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 58b1b8896bf2..347d942d740b 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -13,6 +13,16 @@
#define MCI_PWR_ON 0x03
#define MCI_OD (1 << 6)
#define MCI_ROD (1 << 7)
+/*
+ * The ST Micro version does not have ROD and reuse the voltage registers for
+ * direction settings.
+ */
+#define MCI_ST_DATA2DIREN (1 << 2)
+#define MCI_ST_CMDDIREN (1 << 3)
+#define MCI_ST_DATA0DIREN (1 << 4)
+#define MCI_ST_DATA31DIREN (1 << 5)
+#define MCI_ST_FBCLKEN (1 << 7)
+#define MCI_ST_DATA74DIREN (1 << 8)
#define MMCICLOCK 0x004
#define MCI_CLK_ENABLE (1 << 8)
@@ -176,9 +186,6 @@ struct mmci_host {
struct mmc_data *data;
struct mmc_host *mmc;
struct clk *clk;
- int gpio_cd;
- int gpio_wp;
- int gpio_cd_irq;
bool singleirq;
spinlock_t lock;
@@ -186,6 +193,7 @@ struct mmci_host {
unsigned int mclk;
unsigned int cclk;
u32 pwr_reg;
+ u32 pwr_reg_add;
u32 clk_reg;
u32 datactrl_reg;
u32 busy_status;
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index 32a89cf5ec45..8c98113069ce 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -6,28 +6,9 @@
#include <linux/mmc/host.h>
-
-/*
- * These defines is places here due to access is needed from machine
- * configuration files. The ST Micro version does not have ROD and
- * reuse the voltage registers for direction settings.
- */
-#define MCI_ST_DATA2DIREN (1 << 2)
-#define MCI_ST_CMDDIREN (1 << 3)
-#define MCI_ST_DATA0DIREN (1 << 4)
-#define MCI_ST_DATA31DIREN (1 << 5)
-#define MCI_ST_FBCLKEN (1 << 7)
-#define MCI_ST_DATA74DIREN (1 << 8)
-
-/* Just some dummy forwarding */
-struct dma_chan;
-
/**
* struct mmci_platform_data - platform configuration for the MMCI
* (also known as PL180) block.
- * @f_max: the maximum operational frequency for this host in this
- * platform configuration. When this is specified it takes precedence
- * over the module parameter for the same frequency.
* @ocr_mask: available voltages on the 4 pins from the block, this
* is ignored if a regulator is used, see the MMC_VDD_* masks in
* mmc/host.h
@@ -42,37 +23,14 @@ struct dma_chan;
* @gpio_wp: read this GPIO pin to see if the card is write protected
* @gpio_cd: read this GPIO pin to detect card insertion
* @cd_invert: true if the gpio_cd pin value is active low
- * @capabilities: the capabilities of the block as implemented in
- * this platform, signify anything MMC_CAP_* from mmc/host.h
- * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h
- * @sigdir: a bit field indicating for what bits in the MMC bus the host
- * should enable signal direction indication.
- * @dma_filter: function used to select an appropriate RX and TX
- * DMA channel to be used for DMA, if and only if you're deploying the
- * generic DMA engine
- * @dma_rx_param: parameter passed to the DMA allocation
- * filter in order to select an appropriate RX channel. If
- * there is a bidirectional RX+TX channel, then just specify
- * this and leave dma_tx_param set to NULL
- * @dma_tx_param: parameter passed to the DMA allocation
- * filter in order to select an appropriate TX channel. If this
- * is NULL the driver will attempt to use the RX channel as a
- * bidirectional channel
*/
struct mmci_platform_data {
- unsigned int f_max;
unsigned int ocr_mask;
int (*ios_handler)(struct device *, struct mmc_ios *);
unsigned int (*status)(struct device *);
int gpio_wp;
int gpio_cd;
bool cd_invert;
- unsigned long capabilities;
- unsigned long capabilities2;
- u32 sigdir;
- bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
- void *dma_rx_param;
- void *dma_tx_param;
};
#endif