diff options
-rw-r--r-- | Documentation/devicetree/bindings/video/ssd1307fb.txt | 10 | ||||
-rw-r--r-- | drivers/video/of_display_timing.c | 55 | ||||
-rw-r--r-- | drivers/video/ssd1307fb.c | 392 | ||||
-rw-r--r-- | include/video/of_display_timing.h | 2 |
4 files changed, 339 insertions, 120 deletions
diff --git a/Documentation/devicetree/bindings/video/ssd1307fb.txt b/Documentation/devicetree/bindings/video/ssd1307fb.txt index 3d0060cff062..7a125427ff4b 100644 --- a/Documentation/devicetree/bindings/video/ssd1307fb.txt +++ b/Documentation/devicetree/bindings/video/ssd1307fb.txt @@ -1,13 +1,17 @@ * Solomon SSD1307 Framebuffer Driver Required properties: - - compatible: Should be "solomon,ssd1307fb-<bus>". The only supported bus for - now is i2c. + - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for + now is i2c, and the supported chips are ssd1306 and ssd1307. - reg: Should contain address of the controller on the I2C bus. Most likely 0x3c or 0x3d - pwm: Should contain the pwm to use according to the OF device tree PWM - specification [0] + specification [0]. Only required for the ssd1307. - reset-gpios: Should contain the GPIO used to reset the OLED display + - solomon,height: Height in pixel of the screen driven by the controller + - solomon,width: Width in pixel of the screen driven by the controller + - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is + mapped to. Optional properties: - reset-active-low: Is the reset gpio is active on physical low? diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c index 56009bc02b02..9c0f17b2e6fb 100644 --- a/drivers/video/of_display_timing.c +++ b/drivers/video/of_display_timing.c @@ -53,21 +53,16 @@ static int parse_timing_property(struct device_node *np, const char *name, } /** - * of_get_display_timing - parse display_timing entry from device_node + * of_parse_display_timing - parse display_timing entry from device_node * @np: device_node with the properties **/ -static struct display_timing *of_get_display_timing(struct device_node *np) +static int of_parse_display_timing(struct device_node *np, + struct display_timing *dt) { - struct display_timing *dt; u32 val = 0; int ret = 0; - dt = kzalloc(sizeof(*dt), GFP_KERNEL); - if (!dt) { - pr_err("%s: could not allocate display_timing struct\n", - of_node_full_name(np)); - return NULL; - } + memset(dt, 0, sizeof(*dt)); ret |= parse_timing_property(np, "hback-porch", &dt->hback_porch); ret |= parse_timing_property(np, "hfront-porch", &dt->hfront_porch); @@ -101,12 +96,38 @@ static struct display_timing *of_get_display_timing(struct device_node *np) if (ret) { pr_err("%s: error reading timing properties\n", of_node_full_name(np)); - kfree(dt); - return NULL; + return -EINVAL; + } + + return 0; +} + +/** + * of_get_display_timing - parse a display_timing entry + * @np: device_node with the timing subnode + * @name: name of the timing node + * @dt: display_timing struct to fill + **/ +int of_get_display_timing(struct device_node *np, const char *name, + struct display_timing *dt) +{ + struct device_node *timing_np; + + if (!np) { + pr_err("%s: no devicenode given\n", of_node_full_name(np)); + return -EINVAL; } - return dt; + timing_np = of_find_node_by_name(np, name); + if (!timing_np) { + pr_err("%s: could not find node '%s'\n", + of_node_full_name(np), name); + return -ENOENT; + } + + return of_parse_display_timing(timing_np, dt); } +EXPORT_SYMBOL_GPL(of_get_display_timing); /** * of_get_display_timings - parse all display_timing entries from a device_node @@ -174,9 +195,17 @@ struct display_timings *of_get_display_timings(struct device_node *np) for_each_child_of_node(timings_np, entry) { struct display_timing *dt; + int r; - dt = of_get_display_timing(entry); + dt = kzalloc(sizeof(*dt), GFP_KERNEL); if (!dt) { + pr_err("%s: could not allocate display_timing struct\n", + of_node_full_name(np)); + goto timingfail; + } + + r = of_parse_display_timing(entry, dt); + if (r) { /* * to not encourage wrong devicetrees, fail in case of * an error diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c index 9ef05d3ef68a..44967c8fef2b 100644 --- a/drivers/video/ssd1307fb.c +++ b/drivers/video/ssd1307fb.c @@ -16,24 +16,50 @@ #include <linux/pwm.h> #include <linux/delay.h> -#define SSD1307FB_WIDTH 96 -#define SSD1307FB_HEIGHT 16 - #define SSD1307FB_DATA 0x40 #define SSD1307FB_COMMAND 0x80 +#define SSD1307FB_SET_ADDRESS_MODE 0x20 +#define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL (0x00) +#define SSD1307FB_SET_ADDRESS_MODE_VERTICAL (0x01) +#define SSD1307FB_SET_ADDRESS_MODE_PAGE (0x02) +#define SSD1307FB_SET_COL_RANGE 0x21 +#define SSD1307FB_SET_PAGE_RANGE 0x22 #define SSD1307FB_CONTRAST 0x81 +#define SSD1307FB_CHARGE_PUMP 0x8d #define SSD1307FB_SEG_REMAP_ON 0xa1 #define SSD1307FB_DISPLAY_OFF 0xae +#define SSD1307FB_SET_MULTIPLEX_RATIO 0xa8 #define SSD1307FB_DISPLAY_ON 0xaf #define SSD1307FB_START_PAGE_ADDRESS 0xb0 +#define SSD1307FB_SET_DISPLAY_OFFSET 0xd3 +#define SSD1307FB_SET_CLOCK_FREQ 0xd5 +#define SSD1307FB_SET_PRECHARGE_PERIOD 0xd9 +#define SSD1307FB_SET_COM_PINS_CONFIG 0xda +#define SSD1307FB_SET_VCOMH 0xdb + +struct ssd1307fb_par; + +struct ssd1307fb_ops { + int (*init)(struct ssd1307fb_par *); + int (*remove)(struct ssd1307fb_par *); +}; struct ssd1307fb_par { struct i2c_client *client; + u32 height; struct fb_info *info; + struct ssd1307fb_ops *ops; + u32 page_offset; struct pwm_device *pwm; u32 pwm_period; int reset; + u32 width; +}; + +struct ssd1307fb_array { + u8 type; + u8 data[0]; }; static struct fb_fix_screeninfo ssd1307fb_fix = { @@ -43,68 +69,87 @@ static struct fb_fix_screeninfo ssd1307fb_fix = { .xpanstep = 0, .ypanstep = 0, .ywrapstep = 0, - .line_length = SSD1307FB_WIDTH / 8, .accel = FB_ACCEL_NONE, }; static struct fb_var_screeninfo ssd1307fb_var = { - .xres = SSD1307FB_WIDTH, - .yres = SSD1307FB_HEIGHT, - .xres_virtual = SSD1307FB_WIDTH, - .yres_virtual = SSD1307FB_HEIGHT, .bits_per_pixel = 1, }; -static int ssd1307fb_write_array(struct i2c_client *client, u8 type, u8 *cmd, u32 len) +static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type) { - u8 *buf; - int ret = 0; - - buf = kzalloc(len + 1, GFP_KERNEL); - if (!buf) { - dev_err(&client->dev, "Couldn't allocate sending buffer.\n"); - return -ENOMEM; - } + struct ssd1307fb_array *array; - buf[0] = type; - memcpy(buf + 1, cmd, len); + array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL); + if (!array) + return NULL; - ret = i2c_master_send(client, buf, len + 1); - if (ret != len + 1) { - dev_err(&client->dev, "Couldn't send I2C command.\n"); - goto error; - } + array->type = type; -error: - kfree(buf); - return ret; + return array; } -static inline int ssd1307fb_write_cmd_array(struct i2c_client *client, u8 *cmd, u32 len) +static int ssd1307fb_write_array(struct i2c_client *client, + struct ssd1307fb_array *array, u32 len) { - return ssd1307fb_write_array(client, SSD1307FB_COMMAND, cmd, len); + int ret; + + len += sizeof(struct ssd1307fb_array); + + ret = i2c_master_send(client, (u8 *)array, len); + if (ret != len) { + dev_err(&client->dev, "Couldn't send I2C command.\n"); + return ret; + } + + return 0; } static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd) { - return ssd1307fb_write_cmd_array(client, &cmd, 1); -} + struct ssd1307fb_array *array; + int ret; -static inline int ssd1307fb_write_data_array(struct i2c_client *client, u8 *cmd, u32 len) -{ - return ssd1307fb_write_array(client, SSD1307FB_DATA, cmd, len); + array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND); + if (!array) + return -ENOMEM; + + array->data[0] = cmd; + + ret = ssd1307fb_write_array(client, array, 1); + kfree(array); + + return ret; } static inline int ssd1307fb_write_data(struct i2c_client *client, u8 data) { - return ssd1307fb_write_data_array(client, &data, 1); + struct ssd1307fb_array *array; + int ret; + + array = ssd1307fb_alloc_array(1, SSD1307FB_DATA); + if (!array) + return -ENOMEM; + + array->data[0] = data; + + ret = ssd1307fb_write_array(client, array, 1); + kfree(array); + + return ret; } static void ssd1307fb_update_display(struct ssd1307fb_par *par) { + struct ssd1307fb_array *array; u8 *vmem = par->info->screen_base; int i, j, k; + array = ssd1307fb_alloc_array(par->width * par->height / 8, + SSD1307FB_DATA); + if (!array) + return; + /* * The screen is divided in pages, each having a height of 8 * pixels, and the width of the screen. When sending a byte of @@ -134,24 +179,23 @@ static void ssd1307fb_update_display(struct ssd1307fb_par *par) * (5) A4 B4 C4 D4 E4 F4 G4 H4 */ - for (i = 0; i < (SSD1307FB_HEIGHT / 8); i++) { - ssd1307fb_write_cmd(par->client, SSD1307FB_START_PAGE_ADDRESS + (i + 1)); - ssd1307fb_write_cmd(par->client, 0x00); - ssd1307fb_write_cmd(par->client, 0x10); - - for (j = 0; j < SSD1307FB_WIDTH; j++) { - u8 buf = 0; + for (i = 0; i < (par->height / 8); i++) { + for (j = 0; j < par->width; j++) { + u32 array_idx = i * par->width + j; + array->data[array_idx] = 0; for (k = 0; k < 8; k++) { - u32 page_length = SSD1307FB_WIDTH * i; - u32 index = page_length + (SSD1307FB_WIDTH * k + j) / 8; + u32 page_length = par->width * i; + u32 index = page_length + (par->width * k + j) / 8; u8 byte = *(vmem + index); u8 bit = byte & (1 << (j % 8)); bit = bit >> (j % 8); - buf |= bit << k; + array->data[array_idx] |= bit << k; } - ssd1307fb_write_data(par->client, buf); } } + + ssd1307fb_write_array(par->client, array, par->width * par->height / 8); + kfree(array); } @@ -227,16 +271,167 @@ static struct fb_deferred_io ssd1307fb_defio = { .deferred_io = ssd1307fb_deferred_io, }; +static int ssd1307fb_ssd1307_init(struct ssd1307fb_par *par) +{ + int ret; + + par->pwm = pwm_get(&par->client->dev, NULL); + if (IS_ERR(par->pwm)) { + dev_err(&par->client->dev, "Could not get PWM from device tree!\n"); + return PTR_ERR(par->pwm); + } + + par->pwm_period = pwm_get_period(par->pwm); + /* Enable the PWM */ + pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period); + pwm_enable(par->pwm); + + dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n", + par->pwm->pwm, par->pwm_period); + + /* Map column 127 of the OLED to segment 0 */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON); + if (ret < 0) + return ret; + + /* Turn on the display */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); + if (ret < 0) + return ret; + + return 0; +} + +static int ssd1307fb_ssd1307_remove(struct ssd1307fb_par *par) +{ + pwm_disable(par->pwm); + pwm_put(par->pwm); + return 0; +} + +static struct ssd1307fb_ops ssd1307fb_ssd1307_ops = { + .init = ssd1307fb_ssd1307_init, + .remove = ssd1307fb_ssd1307_remove, +}; + +static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par) +{ + int ret; + + /* Set initial contrast */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); + ret = ret & ssd1307fb_write_cmd(par->client, 0x7f); + if (ret < 0) + return ret; + + /* Set COM direction */ + ret = ssd1307fb_write_cmd(par->client, 0xc8); + if (ret < 0) + return ret; + + /* Set segment re-map */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON); + if (ret < 0) + return ret; + + /* Set multiplex ratio value */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO); + ret = ret & ssd1307fb_write_cmd(par->client, par->height - 1); + if (ret < 0) + return ret; + + /* set display offset value */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET); + ret = ssd1307fb_write_cmd(par->client, 0x20); + if (ret < 0) + return ret; + + /* Set clock frequency */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ); + ret = ret & ssd1307fb_write_cmd(par->client, 0xf0); + if (ret < 0) + return ret; + + /* Set precharge period in number of ticks from the internal clock */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD); + ret = ret & ssd1307fb_write_cmd(par->client, 0x22); + if (ret < 0) + return ret; + + /* Set COM pins configuration */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG); + ret = ret & ssd1307fb_write_cmd(par->client, 0x22); + if (ret < 0) + return ret; + + /* Set VCOMH */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH); + ret = ret & ssd1307fb_write_cmd(par->client, 0x49); + if (ret < 0) + return ret; + + /* Turn on the DC-DC Charge Pump */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP); + ret = ret & ssd1307fb_write_cmd(par->client, 0x14); + if (ret < 0) + return ret; + + /* Switch to horizontal addressing mode */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE); + ret = ret & ssd1307fb_write_cmd(par->client, + SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE); + ret = ret & ssd1307fb_write_cmd(par->client, 0x0); + ret = ret & ssd1307fb_write_cmd(par->client, par->width - 1); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE); + ret = ret & ssd1307fb_write_cmd(par->client, 0x0); + ret = ret & ssd1307fb_write_cmd(par->client, + par->page_offset + (par->height / 8) - 1); + if (ret < 0) + return ret; + + /* Turn on the display */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); + if (ret < 0) + return ret; + + return 0; +} + +static struct ssd1307fb_ops ssd1307fb_ssd1306_ops = { + .init = ssd1307fb_ssd1306_init, +}; + +static const struct of_device_id ssd1307fb_of_match[] = { + { + .compatible = "solomon,ssd1306fb-i2c", + .data = (void *)&ssd1307fb_ssd1306_ops, + }, + { + .compatible = "solomon,ssd1307fb-i2c", + .data = (void *)&ssd1307fb_ssd1307_ops, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, ssd1307fb_of_match); + static int ssd1307fb_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct fb_info *info; - u32 vmem_size = SSD1307FB_WIDTH * SSD1307FB_HEIGHT / 8; + struct device_node *node = client->dev.of_node; + u32 vmem_size; struct ssd1307fb_par *par; u8 *vmem; int ret; - if (!client->dev.of_node) { + if (!node) { dev_err(&client->dev, "No device tree data found!\n"); return -EINVAL; } @@ -247,6 +442,31 @@ static int ssd1307fb_probe(struct i2c_client *client, return -ENOMEM; } + par = info->par; + par->info = info; + par->client = client; + + par->ops = (struct ssd1307fb_ops *)of_match_device(ssd1307fb_of_match, + &client->dev)->data; + + par->reset = of_get_named_gpio(client->dev.of_node, + "reset-gpios", 0); + if (!gpio_is_valid(par->reset)) { + ret = -EINVAL; + goto fb_alloc_error; + } + + if (of_property_read_u32(node, "solomon,width", &par->width)) + par->width = 96; + + if (of_property_read_u32(node, "solomon,height", &par->height)) + par->width = 16; + + if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset)) + par->page_offset = 1; + + vmem_size = par->width * par->height / 8; + vmem = devm_kzalloc(&client->dev, vmem_size, GFP_KERNEL); if (!vmem) { dev_err(&client->dev, "Couldn't allocate graphical memory.\n"); @@ -256,9 +476,15 @@ static int ssd1307fb_probe(struct i2c_client *client, info->fbops = &ssd1307fb_ops; info->fix = ssd1307fb_fix; + info->fix.line_length = par->width / 8; info->fbdefio = &ssd1307fb_defio; info->var = ssd1307fb_var; + info->var.xres = par->width; + info->var.xres_virtual = par->width; + info->var.yres = par->height; + info->var.yres_virtual = par->height; + info->var.red.length = 1; info->var.red.offset = 0; info->var.green.length = 1; @@ -272,17 +498,6 @@ static int ssd1307fb_probe(struct i2c_client *client, fb_deferred_io_init(info); - par = info->par; - par->info = info; - par->client = client; - - par->reset = of_get_named_gpio(client->dev.of_node, - "reset-gpios", 0); - if (!gpio_is_valid(par->reset)) { - ret = -EINVAL; - goto reset_oled_error; - } - ret = devm_gpio_request_one(&client->dev, par->reset, GPIOF_OUT_INIT_HIGH, "oled-reset"); @@ -293,23 +508,6 @@ static int ssd1307fb_probe(struct i2c_client *client, goto reset_oled_error; } - par->pwm = pwm_get(&client->dev, NULL); - if (IS_ERR(par->pwm)) { - dev_err(&client->dev, "Could not get PWM from device tree!\n"); - ret = PTR_ERR(par->pwm); - goto pwm_error; - } - - par->pwm_period = pwm_get_period(par->pwm); - - dev_dbg(&client->dev, "Using PWM%d with a %dns period.\n", par->pwm->pwm, par->pwm_period); - - ret = register_framebuffer(info); - if (ret) { - dev_err(&client->dev, "Couldn't register the framebuffer\n"); - goto fbreg_error; - } - i2c_set_clientdata(client, info); /* Reset the screen */ @@ -318,34 +516,25 @@ static int ssd1307fb_probe(struct i2c_client *client, gpio_set_value(par->reset, 1); udelay(4); - /* Enable the PWM */ - pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period); - pwm_enable(par->pwm); - - /* Map column 127 of the OLED to segment 0 */ - ret = ssd1307fb_write_cmd(client, SSD1307FB_SEG_REMAP_ON); - if (ret < 0) { - dev_err(&client->dev, "Couldn't remap the screen.\n"); - goto remap_error; + if (par->ops->init) { + ret = par->ops->init(par); + if (ret) + goto reset_oled_error; } - /* Turn on the display */ - ret = ssd1307fb_write_cmd(client, SSD1307FB_DISPLAY_ON); - if (ret < 0) { - dev_err(&client->dev, "Couldn't turn the display on.\n"); - goto remap_error; + ret = register_framebuffer(info); + if (ret) { + dev_err(&client->dev, "Couldn't register the framebuffer\n"); + goto panel_init_error; } dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size); return 0; -remap_error: - unregister_framebuffer(info); - pwm_disable(par->pwm); -fbreg_error: - pwm_put(par->pwm); -pwm_error: +panel_init_error: + if (par->ops->remove) + par->ops->remove(par); reset_oled_error: fb_deferred_io_cleanup(info); fb_alloc_error: @@ -359,8 +548,8 @@ static int ssd1307fb_remove(struct i2c_client *client) struct ssd1307fb_par *par = info->par; unregister_framebuffer(info); - pwm_disable(par->pwm); - pwm_put(par->pwm); + if (par->ops->remove) + par->ops->remove(par); fb_deferred_io_cleanup(info); framebuffer_release(info); @@ -368,17 +557,12 @@ static int ssd1307fb_remove(struct i2c_client *client) } static const struct i2c_device_id ssd1307fb_i2c_id[] = { + { "ssd1306fb", 0 }, { "ssd1307fb", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id); -static const struct of_device_id ssd1307fb_of_match[] = { - { .compatible = "solomon,ssd1307fb-i2c" }, - {}, -}; -MODULE_DEVICE_TABLE(of, ssd1307fb_of_match); - static struct i2c_driver ssd1307fb_driver = { .probe = ssd1307fb_probe, .remove = ssd1307fb_remove, diff --git a/include/video/of_display_timing.h b/include/video/of_display_timing.h index 8016eb727cf3..6562ad965889 100644 --- a/include/video/of_display_timing.h +++ b/include/video/of_display_timing.h @@ -14,6 +14,8 @@ struct display_timings; #define OF_USE_NATIVE_MODE -1 +int of_get_display_timing(struct device_node *np, const char *name, + struct display_timing *dt); struct display_timings *of_get_display_timings(struct device_node *np); int of_display_timings_exist(struct device_node *np); |