diff options
| -rw-r--r-- | arch/powerpc/include/asm/eeh.h | 3 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/ppc-pci.h | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/eeh.c | 79 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/eeh_pe.c | 94 |
4 files changed, 97 insertions, 80 deletions
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index 5e45a1c5c9e8..629fb27c093e 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -171,6 +171,9 @@ typedef void *(*eeh_traverse_func)(void *data, void *flag); int __devinit eeh_phb_pe_create(struct pci_controller *phb); int eeh_add_to_parent_pe(struct eeh_dev *edev); int eeh_rmv_from_parent_pe(struct eeh_dev *edev); +void *eeh_pe_dev_traverse(struct eeh_pe *root, + eeh_traverse_func fn, void *flag); +void eeh_pe_restore_bars(struct eeh_pe *pe); void * __devinit eeh_dev_init(struct device_node *dn, void *data); void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb); diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index 3e301b14e09f..5cbe3f2a7e80 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -54,7 +54,6 @@ struct pci_dev *pci_addr_cache_get_device(unsigned long addr); void eeh_slot_error_detail(struct eeh_dev *edev, int severity); int eeh_pci_enable(struct eeh_dev *edev, int function); int eeh_reset_pe(struct eeh_dev *); -void eeh_restore_bars(struct eeh_dev *); int rtas_write_config(struct pci_dn *, int where, int size, u32 val); int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); void eeh_pe_state_mark(struct eeh_pe *pe, int state); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 3c8658ea13f2..b5fcecb06731 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -610,85 +610,6 @@ int eeh_reset_pe(struct eeh_dev *edev) return -1; } -/** Save and restore of PCI BARs - * - * Although firmware will set up BARs during boot, it doesn't - * set up device BAR's after a device reset, although it will, - * if requested, set up bridge configuration. Thus, we need to - * configure the PCI devices ourselves. - */ - -/** - * eeh_restore_one_device_bars - Restore the Base Address Registers for one device - * @edev: PCI device associated EEH device - * - * Loads the PCI configuration space base address registers, - * the expansion ROM base address, the latency timer, and etc. - * from the saved values in the device node. - */ -static inline void eeh_restore_one_device_bars(struct eeh_dev *edev) -{ - int i; - u32 cmd; - struct device_node *dn = eeh_dev_to_of_node(edev); - - if (!edev->phb) - return; - - for (i=4; i<10; i++) { - eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]); - } - - /* 12 == Expansion ROM Address */ - eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]); - -#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) -#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)]) - - eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1, - SAVED_BYTE(PCI_CACHE_LINE_SIZE)); - - eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1, - SAVED_BYTE(PCI_LATENCY_TIMER)); - - /* max latency, min grant, interrupt pin and line */ - eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]); - - /* Restore PERR & SERR bits, some devices require it, - * don't touch the other command bits - */ - eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd); - if (edev->config_space[1] & PCI_COMMAND_PARITY) - cmd |= PCI_COMMAND_PARITY; - else - cmd &= ~PCI_COMMAND_PARITY; - if (edev->config_space[1] & PCI_COMMAND_SERR) - cmd |= PCI_COMMAND_SERR; - else - cmd &= ~PCI_COMMAND_SERR; - eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd); -} - -/** - * eeh_restore_bars - Restore the PCI config space info - * @edev: EEH device - * - * This routine performs a recursive walk to the children - * of this device as well. - */ -void eeh_restore_bars(struct eeh_dev *edev) -{ - struct device_node *dn; - if (!edev) - return; - - if ((edev->mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(edev->class_code)) - eeh_restore_one_device_bars(edev); - - for_each_child_of_node(eeh_dev_to_of_node(edev), dn) - eeh_restore_bars(of_node_to_eeh_dev(dn)); -} - /** * eeh_save_bars - Save device bars * @edev: PCI device associated EEH device diff --git a/arch/powerpc/platforms/pseries/eeh_pe.c b/arch/powerpc/platforms/pseries/eeh_pe.c index 0dac1b69582d..2b7e85b804a4 100644 --- a/arch/powerpc/platforms/pseries/eeh_pe.c +++ b/arch/powerpc/platforms/pseries/eeh_pe.c @@ -172,6 +172,38 @@ static void *eeh_pe_traverse(struct eeh_pe *root, } /** + * eeh_pe_dev_traverse - Traverse the devices from the PE + * @root: EEH PE + * @fn: function callback + * @flag: extra parameter to callback + * + * The function is used to traverse the devices of the specified + * PE and its child PEs. + */ +void *eeh_pe_dev_traverse(struct eeh_pe *root, + eeh_traverse_func fn, void *flag) +{ + struct eeh_pe *pe; + struct eeh_dev *edev; + void *ret; + + if (!root) { + pr_warning("%s: Invalid PE %p\n", __func__, root); + return NULL; + } + + /* Traverse root PE */ + for (pe = root; pe; pe = eeh_pe_next(pe, root)) { + eeh_pe_for_each_dev(pe, edev) { + ret = fn(edev, flag); + if (ret) return ret; + } + } + + return NULL; +} + +/** * __eeh_pe_get - Check the PE address * @data: EEH PE * @flag: EEH device @@ -467,3 +499,65 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state) { eeh_pe_traverse(pe, __eeh_pe_state_clear, &state); } + +/** + * eeh_restore_one_device_bars - Restore the Base Address Registers for one device + * @data: EEH device + * @flag: Unused + * + * Loads the PCI configuration space base address registers, + * the expansion ROM base address, the latency timer, and etc. + * from the saved values in the device node. + */ +static void *eeh_restore_one_device_bars(void *data, void *flag) +{ + int i; + u32 cmd; + struct eeh_dev *edev = (struct eeh_dev *)data; + struct device_node *dn = eeh_dev_to_of_node(edev); + + for (i = 4; i < 10; i++) + eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]); + /* 12 == Expansion ROM Address */ + eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]); + +#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) +#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)]) + + eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1, + SAVED_BYTE(PCI_CACHE_LINE_SIZE)); + eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1, + SAVED_BYTE(PCI_LATENCY_TIMER)); + + /* max latency, min grant, interrupt pin and line */ + eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]); + + /* + * Restore PERR & SERR bits, some devices require it, + * don't touch the other command bits + */ + eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd); + if (edev->config_space[1] & PCI_COMMAND_PARITY) + cmd |= PCI_COMMAND_PARITY; + else + cmd &= ~PCI_COMMAND_PARITY; + if (edev->config_space[1] & PCI_COMMAND_SERR) + cmd |= PCI_COMMAND_SERR; + else + cmd &= ~PCI_COMMAND_SERR; + eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd); + + return NULL; +} + +/** + * eeh_pe_restore_bars - Restore the PCI config space info + * @pe: EEH PE + * + * This routine performs a recursive walk to the children + * of this device as well. + */ +void eeh_pe_restore_bars(struct eeh_pe *pe) +{ + eeh_pe_dev_traverse(pe, eeh_restore_one_device_bars, NULL); +} |