diff options
| -rw-r--r-- | kernel/power/Makefile | 2 | ||||
| -rw-r--r-- | kernel/power/main.c | 503 | ||||
| -rw-r--r-- | kernel/power/power.h | 17 | ||||
| -rw-r--r-- | kernel/power/suspend.c | 300 | ||||
| -rw-r--r-- | kernel/power/suspend_test.c | 187 |
5 files changed, 505 insertions, 504 deletions
diff --git a/kernel/power/Makefile b/kernel/power/Makefile index 720ea4f781bd..c4baf1b633c4 100644 --- a/kernel/power/Makefile +++ b/kernel/power/Makefile @@ -6,6 +6,8 @@ endif obj-$(CONFIG_PM) += main.o obj-$(CONFIG_PM_SLEEP) += console.o obj-$(CONFIG_FREEZER) += process.o +obj-$(CONFIG_SUSPEND) += suspend.o +obj-$(CONFIG_PM_TEST_SUSPEND) += suspend_test.o obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o diff --git a/kernel/power/main.c b/kernel/power/main.c index 2a19f347bd8a..f710e36930cc 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -8,20 +8,9 @@ * */ -#include <linux/module.h> -#include <linux/suspend.h> #include <linux/kobject.h> #include <linux/string.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/kmod.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/cpu.h> #include <linux/resume-trace.h> -#include <linux/freezer.h> -#include <linux/vmstat.h> -#include <linux/syscalls.h> #include "power.h" @@ -119,355 +108,6 @@ power_attr(pm_test); #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_SUSPEND - -static int suspend_test(int level) -{ -#ifdef CONFIG_PM_DEBUG - if (pm_test_level == level) { - printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n"); - mdelay(5000); - return 1; - } -#endif /* !CONFIG_PM_DEBUG */ - return 0; -} - -#ifdef CONFIG_PM_TEST_SUSPEND - -/* - * We test the system suspend code by setting an RTC wakealarm a short - * time in the future, then suspending. Suspending the devices won't - * normally take long ... some systems only need a few milliseconds. - * - * The time it takes is system-specific though, so when we test this - * during system bootup we allow a LOT of time. - */ -#define TEST_SUSPEND_SECONDS 5 - -static unsigned long suspend_test_start_time; - -static void suspend_test_start(void) -{ - /* FIXME Use better timebase than "jiffies", ideally a clocksource. - * What we want is a hardware counter that will work correctly even - * during the irqs-are-off stages of the suspend/resume cycle... - */ - suspend_test_start_time = jiffies; -} - -static void suspend_test_finish(const char *label) -{ - long nj = jiffies - suspend_test_start_time; - unsigned msec; - - msec = jiffies_to_msecs(abs(nj)); - pr_info("PM: %s took %d.%03d seconds\n", label, - msec / 1000, msec % 1000); - - /* Warning on suspend means the RTC alarm period needs to be - * larger -- the system was sooo slooowwww to suspend that the - * alarm (should have) fired before the system went to sleep! - * - * Warning on either suspend or resume also means the system - * has some performance issues. The stack dump of a WARN_ON - * is more likely to get the right attention than a printk... - */ - WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label); -} - -#else - -static void suspend_test_start(void) -{ -} - -static void suspend_test_finish(const char *label) -{ -} - -#endif - -static struct platform_suspend_ops *suspend_ops; - -/** - * suspend_set_ops - Set the global suspend method table. - * @ops: Pointer to ops structure. - */ - -void suspend_set_ops(struct platform_suspend_ops *ops) -{ - mutex_lock(&pm_mutex); - suspend_ops = ops; - mutex_unlock(&pm_mutex); -} - -/** - * suspend_valid_only_mem - generic memory-only valid callback - * - * Platform drivers that implement mem suspend only and only need - * to check for that in their .valid callback can use this instead - * of rolling their own .valid callback. - */ -int suspend_valid_only_mem(suspend_state_t state) -{ - return state == PM_SUSPEND_MEM; -} - -/** - * suspend_prepare - Do prep work before entering low-power state. - * - * This is common code that is called for each state that we're entering. - * Run suspend notifiers, allocate a console and stop all processes. - */ -static int suspend_prepare(void) -{ - int error; - - if (!suspend_ops || !suspend_ops->enter) - return -EPERM; - - pm_prepare_console(); - - error = pm_notifier_call_chain(PM_SUSPEND_PREPARE); - if (error) - goto Finish; - - error = usermodehelper_disable(); - if (error) - goto Finish; - - error = suspend_freeze_processes(); - if (!error) - return 0; - - suspend_thaw_processes(); - usermodehelper_enable(); - Finish: - pm_notifier_call_chain(PM_POST_SUSPEND); - pm_restore_console(); - return error; -} - -/* default implementation */ -void __attribute__ ((weak)) arch_suspend_disable_irqs(void) -{ - local_irq_disable(); -} - -/* default implementation */ -void __attribute__ ((weak)) arch_suspend_enable_irqs(void) -{ - local_irq_enable(); -} - -/** - * suspend_enter - enter the desired system sleep state. - * @state: state to enter - * - * This function should be called after devices have been suspended. - */ -static int suspend_enter(suspend_state_t state) -{ - int error; - - if (suspend_ops->prepare) { - error = suspend_ops->prepare(); - if (error) - return error; - } - - error = dpm_suspend_noirq(PMSG_SUSPEND); - if (error) { - printk(KERN_ERR "PM: Some devices failed to power down\n"); - goto Platfrom_finish; - } - - if (suspend_ops->prepare_late) { - error = suspend_ops->prepare_late(); - if (error) - goto Power_up_devices; - } - - if (suspend_test(TEST_PLATFORM)) - goto Platform_wake; - - error = disable_nonboot_cpus(); - if (error || suspend_test(TEST_CPUS)) - goto Enable_cpus; - - arch_suspend_disable_irqs(); - BUG_ON(!irqs_disabled()); - - error = sysdev_suspend(PMSG_SUSPEND); - if (!error) { - if (!suspend_test(TEST_CORE)) - error = suspend_ops->enter(state); - sysdev_resume(); - } - - arch_suspend_enable_irqs(); - BUG_ON(irqs_disabled()); - - Enable_cpus: - enable_nonboot_cpus(); - - Platform_wake: - if (suspend_ops->wake) - suspend_ops->wake(); - - Power_up_devices: - dpm_resume_noirq(PMSG_RESUME); - - Platfrom_finish: - if (suspend_ops->finish) - suspend_ops->finish(); - - return error; -} - -/** - * suspend_devices_and_enter - suspend devices and enter the desired system - * sleep state. - * @state: state to enter - */ -int suspend_devices_and_enter(suspend_state_t state) -{ - int error; - - if (!suspend_ops) - return -ENOSYS; - - if (suspend_ops->begin) { - error = suspend_ops->begin(state); - if (error) - goto Close; - } - suspend_console(); - suspend_test_start(); - error = dpm_suspend_start(PMSG_SUSPEND); - if (error) { - printk(KERN_ERR "PM: Some devices failed to suspend\n"); - goto Recover_platform; - } - suspend_test_finish("suspend devices"); - if (suspend_test(TEST_DEVICES)) - goto Recover_platform; - - suspend_enter(state); - - Resume_devices: - suspend_test_start(); - dpm_resume_end(PMSG_RESUME); - suspend_test_finish("resume devices"); - resume_console(); - Close: - if (suspend_ops->end) - suspend_ops->end(); - return error; - - Recover_platform: - if (suspend_ops->recover) - suspend_ops->recover(); - goto Resume_devices; -} - -/** - * suspend_finish - Do final work before exiting suspend sequence. - * - * Call platform code to clean up, restart processes, and free the - * console that we've allocated. This is not called for suspend-to-disk. - */ -static void suspend_finish(void) -{ - suspend_thaw_processes(); - usermodehelper_enable(); - pm_notifier_call_chain(PM_POST_SUSPEND); - pm_restore_console(); -} - - - - -static const char * const pm_states[PM_SUSPEND_MAX] = { - [PM_SUSPEND_STANDBY] = "standby", - [PM_SUSPEND_MEM] = "mem", -}; - -static inline int valid_state(suspend_state_t state) -{ - /* All states need lowlevel support and need to be valid - * to the lowlevel implementation, no valid callback - * implies that none are valid. */ - if (!suspend_ops || !suspend_ops->valid || !suspend_ops->valid(state)) - return 0; - return 1; -} - - -/** - * enter_state - Do common work of entering low-power state. - * @state: pm_state structure for state we're entering. - * - * Make sure we're the only ones trying to enter a sleep state. Fail - * if someone has beat us to it, since we don't want anything weird to - * happen when we wake up. - * Then, do the setup for suspend, enter the state, and cleaup (after - * we've woken up). - */ -static int enter_state(suspend_state_t state) -{ - int error; - - if (!valid_state(state)) - return -ENODEV; - - if (!mutex_trylock(&pm_mutex)) - return -EBUSY; - - printk(KERN_INFO "PM: Syncing filesystems ... "); - sys_sync(); - printk("done.\n"); - - pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]); - error = suspend_prepare(); - if (error) - goto Unlock; - - if (suspend_test(TEST_FREEZER)) - goto Finish; - - pr_debug("PM: Entering %s sleep\n", pm_states[state]); - error = suspend_devices_and_enter(state); - - Finish: - pr_debug("PM: Finishing wakeup.\n"); - suspend_finish(); - Unlock: - mutex_unlock(&pm_mutex); - return error; -} - - -/** - * pm_suspend - Externally visible function for suspending system. - * @state: Enumerated value of state to enter. - * - * Determine whether or not value is within range, get state - * structure, and enter (above). - */ - -int pm_suspend(suspend_state_t state) -{ - if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX) - return enter_state(state); - return -EINVAL; -} - -EXPORT_SYMBOL(pm_suspend); - -#endif /* CONFIG_SUSPEND */ - struct kobject *power_kobj; /** @@ -480,7 +120,6 @@ struct kobject *power_kobj; * store() accepts one of those strings, translates it into the * proper enumerated value, and initiates a suspend transition. */ - static ssize_t state_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { @@ -578,7 +217,6 @@ static struct attribute_group attr_group = { .attrs = g, }; - static int __init pm_init(void) { power_kobj = kobject_create_and_add("power", NULL); @@ -588,144 +226,3 @@ static int __init pm_init(void) } core_initcall(pm_init); - - -#ifdef CONFIG_PM_TEST_SUSPEND - -#include <linux/rtc.h> - -/* - * To test system suspend, we need a hands-off mechanism to resume the - * system. RTCs wake alarms are a common self-contained mechanism. - */ - -static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state) -{ - static char err_readtime[] __initdata = - KERN_ERR "PM: can't read %s time, err %d\n"; - static char err_wakealarm [] __initdata = - KERN_ERR "PM: can't set %s wakealarm, err %d\n"; - static char err_suspend[] __initdata = - KERN_ERR "PM: suspend test failed, error %d\n"; - static char info_test[] __initdata = - KERN_INFO "PM: test RTC wakeup from '%s' suspend\n"; - - unsigned long now; - struct rtc_wkalrm alm; - int status; - - /* this may fail if the RTC hasn't been initialized */ - status = rtc_read_time(rtc, &alm.time); - if (status < 0) { - printk(err_readtime, dev_name(&rtc->dev), status); - return; - } - rtc_tm_to_time(&alm.time, &now); - - memset(&alm, 0, sizeof alm); - rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time); - alm.enabled = true; - - status = rtc_set_alarm(rtc, &alm); - if (status < 0) { - printk(err_wakealarm, dev_name(&rtc->dev), status); - return; - } - - if (state == PM_SUSPEND_MEM) { - printk(info_test, pm_states[state]); - status = pm_suspend(state); - if (status == -ENODEV) - state = PM_SUSPEND_STANDBY; - } - if (state == PM_SUSPEND_STANDBY) { - printk(info_test, pm_states[state]); - status = pm_suspend(state); - } - if (status < 0) - printk(err_suspend, status); - - /* Some platforms can't detect that the alarm triggered the - * wakeup, or (accordingly) disable it after it afterwards. - * It's supposed to give oneshot behavior; cope. - */ - alm.enabled = false; - rtc_set_alarm(rtc, &alm); -} - -static int __init has_wakealarm(struct device *dev, void *name_ptr) -{ - struct rtc_device *candidate = to_rtc_device(dev); - - if (!candidate->ops->set_alarm) - return 0; - if (!device_may_wakeup(candidate->dev.parent)) - return 0; - - *(const char **)name_ptr = dev_name(dev); - return 1; -} - -/* - * Kernel options like "test_suspend=mem" force suspend/resume sanity tests - * at startup time. They're normally disabled, for faster boot and because - * we can't know which states really work on this particular system. - */ -static suspend_state_t test_state __initdata = PM_SUSPEND_ON; - -static char warn_bad_state[] __initdata = - KERN_WARNING "PM: can't test '%s' suspend state\n"; - -static int __init setup_test_suspend(char *value) -{ - unsigned i; - - /* "=mem" ==> "mem" */ - value++; - for (i = 0; i < PM_SUSPEND_MAX; i++) { - if (!pm_states[i]) - continue; - if (strcmp(pm_states[i], value) != 0) - continue; - test_state = (__force suspend_state_t) i; - return 0; - } - printk(warn_bad_state, value); - return 0; -} -__setup("test_suspend", setup_test_suspend); - -static int __init test_suspend(void) -{ - static char warn_no_rtc[] __initdata = - KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n"; - - char *pony = NULL; - struct rtc_device *rtc = NULL; - - /* PM is initialized by now; is that state testable? */ - if (test_state == PM_SUSPEND_ON) - goto done; - if (!valid_state(test_state)) { - printk(warn_bad_state, pm_states[test_state]); - goto done; - } - - /* RTCs have initialized by now too ... can we use one? */ - class_find_device(rtc_class, NULL, &pony, has_wakealarm); - if (pony) - rtc = rtc_class_open(pony); - if (!rtc) { - printk(warn_no_rtc); - goto done; - } - - /* go for it */ - test_wakealarm(rtc, test_state); - rtc_class_close(rtc); -done: - return 0; -} -late_initcall(test_suspend); - -#endif /* CONFIG_PM_TEST_SUSPEND */ diff --git a/kernel/power/power.h b/kernel/power/power.h index ec4dbdfb07b4..2bd98d9fc19e 100644 --- a/kernel/power/power.h +++ b/kernel/power/power.h @@ -160,15 +160,30 @@ extern void swsusp_show_speed(struct timeval *, struct timeval *, unsigned int, char *); #ifdef CONFIG_SUSPEND -/* kernel/power/main.c */ +/* kernel/power/suspend.c */ +extern const char *const pm_states[]; + +extern bool valid_state(suspend_state_t state); extern int suspend_devices_and_enter(suspend_state_t state); +extern int enter_state(suspend_state_t state); #else /* !CONFIG_SUSPEND */ static inline int suspend_devices_and_enter(suspend_state_t state) { return -ENOSYS; } +static inline int enter_state(suspend_state_t state) { return -ENOSYS; } +static inline bool valid_state(suspend_state_t state) { return false; } #endif /* !CONFIG_SUSPEND */ +#ifdef CONFIG_PM_TEST_SUSPEND +/* kernel/power/suspend_test.c */ +extern void suspend_test_start(void); +extern void suspend_test_finish(const char *label); +#else /* !CONFIG_PM_TEST_SUSPEND */ +static inline void suspend_test_start(void) {} +static inline void suspend_test_finish(const char *label) {} +#endif /* !CONFIG_PM_TEST_SUSPEND */ + #ifdef CONFIG_PM_SLEEP /* kernel/power/main.c */ extern int pm_notifier_call_chain(unsigned long val); diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c new file mode 100644 index 000000000000..6f10dfc2d3e9 --- /dev/null +++ b/kernel/power/suspend.c @@ -0,0 +1,300 @@ +/* + * kernel/power/suspend.c - Suspend to RAM and standby functionality. + * + * Copyright (c) 2003 Patrick Mochel + * Copyright (c) 2003 Open Source Development Lab + * Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * + * This file is released under the GPLv2. + */ + +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/cpu.h> +#include <linux/syscalls.h> + +#include "power.h" + +const char *const pm_states[PM_SUSPEND_MAX] = { + [PM_SUSPEND_STANDBY] = "standby", + [PM_SUSPEND_MEM] = "mem", +}; + +static struct platform_suspend_ops *suspend_ops; + +/** + * suspend_set_ops - Set the global suspend method table. + * @ops: Pointer to ops structure. + */ +void suspend_set_ops(struct platform_suspend_ops *ops) +{ + mutex_lock(&pm_mutex); + suspend_ops = ops; + mutex_unlock(&pm_mutex); +} + +bool valid_state(suspend_state_t state) +{ + /* + * All states need lowlevel support and need to be valid to the lowlevel + * implementation, no valid callback implies that none are valid. + */ + return suspend_ops && suspend_ops->valid && suspend_ops->valid(state); +} + +/** + * suspend_valid_only_mem - generic memory-only valid callback + * + * Platform drivers that implement mem suspend only and only need + * to check for that in their .valid callback can use this instead + * of rolling their own .valid callback. + */ +int suspend_valid_only_mem(suspend_state_t state) +{ + return state == PM_SUSPEND_MEM; +} + +static int suspend_test(int level) +{ +#ifdef CONFIG_PM_DEBUG + if (pm_test_level == level) { + printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n"); + mdelay(5000); + return 1; + } +#endif /* !CONFIG_PM_DEBUG */ + return 0; +} + +/** + * suspend_prepare - Do prep work before entering low-power state. + * + * This is common code that is called for each state that we're entering. + * Run suspend notifiers, allocate a console and stop all processes. + */ +static int suspend_prepare(void) +{ + int error; + + if (!suspend_ops || !suspend_ops->enter) + return -EPERM; + + pm_prepare_console(); + + error = pm_notifier_call_chain(PM_SUSPEND_PREPARE); + if (error) + goto Finish; + + error = usermodehelper_disable(); + if (error) + goto Finish; + + error = suspend_freeze_processes(); + if (!error) + return 0; + + suspend_thaw_processes(); + usermodehelper_enable(); + Finish: + pm_notifier_call_chain(PM_POST_SUSPEND); + pm_restore_console(); + return error; +} + +/* default implementation */ +void __attribute__ ((weak)) arch_suspend_disable_irqs(void) +{ + local_irq_disable(); +} + +/* default implementation */ +void __attribute__ ((weak)) arch_suspend_enable_irqs(void) +{ + local_irq_enable(); +} + +/** + * suspend_enter - enter the desired system sleep state. + * @state: state to enter + * + * This function should be called after devices have been suspended. + */ +static int suspend_enter(suspend_state_t state) +{ + int error; + + if (suspend_ops->prepare) { + error = suspend_ops->prepare(); + if (error) + return error; + } + + error = dpm_suspend_noirq(PMSG_SUSPEND); + if (error) { + printk(KERN_ERR "PM: Some devices failed to power down\n"); + goto Platfrom_finish; + } + + if (suspend_ops->prepare_late) { + error = suspend_ops->prepare_late(); + if (error) + goto Power_up_devices; + } + + if (suspend_test(TEST_PLATFORM)) + goto Platform_wake; + + error = disable_nonboot_cpus(); + if (error || suspend_test(TEST_CPUS)) + goto Enable_cpus; + + arch_suspend_disable_irqs(); + BUG_ON(!irqs_disabled()); + + error = sysdev_suspend(PMSG_SUSPEND); + if (!error) { + if (!suspend_test(TEST_CORE)) + error = suspend_ops->enter(state); + sysdev_resume(); + } + + arch_suspend_enable_irqs(); + BUG_ON(irqs_disabled()); + + Enable_cpus: + enable_nonboot_cpus(); + + Platform_wake: + if (suspend_ops->wake) + suspend_ops->wake(); + + Power_up_devices: + dpm_resume_noirq(PMSG_RESUME); + + Platfrom_finish: + if (suspend_ops->finish) + suspend_ops->finish(); + + return error; +} + +/** + * suspend_devices_and_enter - suspend devices and enter the desired system + * sleep state. + * @state: state to enter + */ +int suspend_devices_and_enter(suspend_state_t state) +{ + int error; + + if (!suspend_ops) + return -ENOSYS; + + if (suspend_ops->begin) { + error = suspend_ops->begin(state); + if (error) + goto Close; + } + suspend_console(); + suspend_test_start(); + error = dpm_suspend_start(PMSG_SUSPEND); + if (error) { + printk(KERN_ERR "PM: Some devices failed to suspend\n"); + goto Recover_platform; + } + suspend_test_finish("suspend devices"); + if (suspend_test(TEST_DEVICES)) + goto Recover_platform; + + suspend_enter(state); + + Resume_devices: + suspend_test_start(); + dpm_resume_end(PMSG_RESUME); + suspend_test_finish("resume devices"); + resume_console(); + Close: + if (suspend_ops->end) + suspend_ops->end(); + return error; + + Recover_platform: + if (suspend_ops->recover) + suspend_ops->recover(); + goto Resume_devices; +} + +/** + * suspend_finish - Do final work before exiting suspend sequence. + * + * Call platform code to clean up, restart processes, and free the + * console that we've allocated. This is not called for suspend-to-disk. + */ +static void suspend_finish(void) +{ + suspend_thaw_processes(); + usermodehelper_enable(); + pm_notifier_call_chain(PM_POST_SUSPEND); + pm_restore_console(); +} + +/** + * enter_state - Do common work of entering low-power state. + * @state: pm_state structure for state we're entering. + * + * Make sure we're the only ones trying to enter a sleep state. Fail + * if someone has beat us to it, since we don't want anything weird to + * happen when we wake up. + * Then, do the setup for suspend, enter the state, and cleaup (after + * we've woken up). + */ +int enter_state(suspend_state_t state) +{ + int error; + + if (!valid_state(state)) + return -ENODEV; + + if (!mutex_trylock(&pm_mutex)) + return -EBUSY; + + printk(KERN_INFO "PM: Syncing filesystems ... "); + sys_sync(); + printk("done.\n"); + + pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]); + error = suspend_prepare(); + if (error) + goto Unlock; + + if (suspend_test(TEST_FREEZER)) + goto Finish; + + pr_debug("PM: Entering %s sleep\n", pm_states[state]); + error = suspend_devices_and_enter(state); + + Finish: + pr_debug("PM: Finishing wakeup.\n"); + suspend_finish(); + Unlock: + mutex_unlock(&pm_mutex); + return error; +} + +/** + * pm_suspend - Externally visible function for suspending system. + * @state: Enumerated value of state to enter. + * + * Determine whether or not value is within range, get state + * structure, and enter (above). + */ +int pm_suspend(suspend_state_t state) +{ + if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX) + return enter_state(state); + return -EINVAL; +} +EXPORT_SYMBOL(pm_suspend); diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c new file mode 100644 index 000000000000..17d8bb1acf9c --- /dev/null +++ b/kernel/power/suspend_test.c @@ -0,0 +1,187 @@ +/* + * kernel/power/suspend_test.c - Suspend to RAM and standby test facility. + * + * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz> + * + * This file is released under the GPLv2. + */ + +#include <linux/init.h> +#include <linux/rtc.h> + +#include "power.h" + +/* + * We test the system suspend code by setting an RTC wakealarm a short + * time in the future, then suspending. Suspending the devices won't + * normally take long ... some systems only need a few milliseconds. + * + * The time it takes is system-specific though, so when we test this + * during system bootup we allow a LOT of time. + */ +#define TEST_SUSPEND_SECONDS 5 + +static unsigned long suspend_test_start_time; + +void suspend_test_start(void) +{ + /* FIXME Use better timebase than "jiffies", ideally a clocksource. + * What we want is a hardware counter that will work correctly even + * during the irqs-are-off stages of the suspend/resume cycle... + */ + suspend_test_start_time = jiffies; +} + +void suspend_test_finish(const char *label) +{ + long nj = jiffies - suspend_test_start_time; + unsigned msec; + + msec = jiffies_to_msecs(abs(nj)); + pr_info("PM: %s took %d.%03d seconds\n", label, + msec / 1000, msec % 1000); + + /* Warning on suspend means the RTC alarm period needs to be + * larger -- the system was sooo slooowwww to suspend that the + * alarm (should have) fired before the system went to sleep! + * + * Warning on either suspend or resume also means the system + * has some performance issues. The stack dump of a WARN_ON + * is more likely to get the right attention than a printk... + */ + WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label); +} + +/* + * To test system suspend, we need a hands-off mechanism to resume the + * system. RTCs wake alarms are a common self-contained mechanism. + */ + +static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state) +{ + static char err_readtime[] __initdata = + KERN_ERR "PM: can't read %s time, err %d\n"; + static char err_wakealarm [] __initdata = + KERN_ERR "PM: can't set %s wakealarm, err %d\n"; + static char err_suspend[] __initdata = + KERN_ERR "PM: suspend test failed, error %d\n"; + static char info_test[] __initdata = + KERN_INFO "PM: test RTC wakeup from '%s' suspend\n"; + + unsigned long now; + struct rtc_wkalrm alm; + int status; + + /* this may fail if the RTC hasn't been initialized */ + status = rtc_read_time(rtc, &alm.time); + if (status < 0) { + printk(err_readtime, dev_name(&rtc->dev), status); + return; + } + rtc_tm_to_time(&alm.time, &now); + + memset(&alm, 0, sizeof alm); + rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time); + alm.enabled = true; + + status = rtc_set_alarm(rtc, &alm); + if (status < 0) { + printk(err_wakealarm, dev_name(&rtc->dev), status); + return; + } + + if (state == PM_SUSPEND_MEM) { + printk(info_test, pm_states[state]); + status = pm_suspend(state); + if (status == -ENODEV) + state = PM_SUSPEND_STANDBY; + } + if (state == PM_SUSPEND_STANDBY) { + printk(info_test, pm_states[state]); + status = pm_suspend(state); + } + if (status < 0) + printk(err_suspend, status); + + /* Some platforms can't detect that the alarm triggered the + * wakeup, or (accordingly) disable it after it afterwards. + * It's supposed to give oneshot behavior; cope. + */ + alm.enabled = false; + rtc_set_alarm(rtc, &alm); +} + +static int __init has_wakealarm(struct device *dev, void *name_ptr) +{ + struct rtc_device *candidate = to_rtc_device(dev); + + if (!candidate->ops->set_alarm) + return 0; + if (!device_may_wakeup(candidate->dev.parent)) + return 0; + + *(const char **)name_ptr = dev_name(dev); + return 1; +} + +/* + * Kernel options like "test_suspend=mem" force suspend/resume sanity tests + * at startup time. They're normally disabled, for faster boot and because + * we can't know which states really work on this particular system. + */ +static suspend_state_t test_state __initdata = PM_SUSPEND_ON; + +static char warn_bad_state[] __initdata = + KERN_WARNING "PM: can't test '%s' suspend state\n"; + +static int __init setup_test_suspend(char *value) +{ + unsigned i; + + /* "=mem" ==> "mem" */ + value++; + for (i = 0; i < PM_SUSPEND_MAX; i++) { + if (!pm_states[i]) + continue; + if (strcmp(pm_states[i], value) != 0) + continue; + test_state = (__force suspend_state_t) i; + return 0; + } + printk(warn_bad_state, value); + return 0; +} +__setup("test_suspend", setup_test_suspend); + +static int __init test_suspend(void) +{ + static char warn_no_rtc[] __initdata = + KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n"; + + char *pony = NULL; + struct rtc_device *rtc = NULL; + + /* PM is initialized by now; is that state testable? */ + if (test_state == PM_SUSPEND_ON) + goto done; + if (!valid_state(test_state)) { + printk(warn_bad_state, pm_states[test_state]); + goto done; + } + + /* RTCs have initialized by now too ... can we use one? */ + class_find_device(rtc_class, NULL, &pony, has_wakealarm); + if (pony) + rtc = rtc_class_open(pony); + if (!rtc) { + printk(warn_no_rtc); + goto done; + } + + /* go for it */ + test_wakealarm(rtc, test_state); + rtc_class_close(rtc); +done: + return 0; +} +late_initcall(test_suspend); |