diff options
-rw-r--r-- | arch/mips/cobalt/Makefile | 1 | ||||
-rw-r--r-- | arch/mips/cobalt/mtd.c | 61 | ||||
-rw-r--r-- | arch/mips/configs/cobalt_defconfig | 86 | ||||
-rw-r--r-- | drivers/char/lcd.c | 168 | ||||
-rw-r--r-- | drivers/char/lcd.h | 32 |
5 files changed, 146 insertions, 202 deletions
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index 225ac8f34ccd..12589a1ff048 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -5,5 +5,6 @@ obj-y := irq.o reset.o setup.o obj-$(CONFIG_EARLY_PRINTK) += console.o +obj-$(CONFIG_MTD_PHYSMAP) += mtd.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c new file mode 100644 index 000000000000..01d8ec77fe9c --- /dev/null +++ b/arch/mips/cobalt/mtd.c @@ -0,0 +1,61 @@ +/* + * Registration of Cobalt MTD device. + * + * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +static struct mtd_partition cobalt_mtd_partitions[] = { + { + .name = "Colo", + .offset = 0x0, + .size = 0x80000, + }, +}; + +static struct physmap_flash_data cobalt_flash_data = { + .width = 1, + .nr_parts = 1, + .parts = cobalt_mtd_partitions, +}; + +static struct resource cobalt_mtd_resource = { + .start = 0x1fc00000, + .end = 0x1fc7ffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device cobalt_mtd = { + .name = "physmap-flash", + .dev = { + .platform_data = &cobalt_flash_data, + }, + .num_resources = 1, + .resource = &cobalt_mtd_resource, +}; + +static int __init cobalt_mtd_init(void) +{ + platform_device_register(&cobalt_mtd); + + return 0; +} + +module_init(cobalt_mtd_init); diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 1a3d776ad1e4..f88c40fc9948 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.20 -# Sun Feb 18 21:27:37 2007 +# Mon Feb 19 14:51:58 2007 # CONFIG_MIPS=y @@ -373,7 +373,88 @@ CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) # -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set # # Parallel port support @@ -901,6 +982,7 @@ CONFIG_CONFIGFS_FS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set diff --git a/drivers/char/lcd.c b/drivers/char/lcd.c index d649abbf0857..5f4fdcf7c96e 100644 --- a/drivers/char/lcd.c +++ b/drivers/char/lcd.c @@ -409,138 +409,6 @@ static int lcd_ioctl(struct inode *inode, struct file *file, break; } -// Erase the flash - - case FLASH_Erase:{ - - int ctr = 0; - - if ( !capable(CAP_SYS_ADMIN) ) return -EPERM; - - pr_info(LCD "Erasing Flash\n"); - - // Chip Erase Sequence - WRITE_FLASH(kFlash_Addr1, kFlash_Data1); - WRITE_FLASH(kFlash_Addr2, kFlash_Data2); - WRITE_FLASH(kFlash_Addr1, kFlash_Erase3); - WRITE_FLASH(kFlash_Addr1, kFlash_Data1); - WRITE_FLASH(kFlash_Addr2, kFlash_Data2); - WRITE_FLASH(kFlash_Addr1, kFlash_Erase6); - - while ((!dqpoll(0x00000000, 0xFF)) - && (!timeout(0x00000000))) { - ctr++; - } - - if (READ_FLASH(0x07FFF0) == 0xFF) { - pr_info(LCD "Erase Successful\n"); - } else if (timeout) { - pr_info(LCD "Erase Timed Out\n"); - } - - break; - } - -// burn the flash - - case FLASH_Burn:{ - - volatile unsigned long burn_addr; - unsigned long flags; - unsigned int i, index; - unsigned char *rom; - - - struct lcd_display display; - - if ( !capable(CAP_SYS_ADMIN) ) return -EPERM; - - if (copy_from_user - (&display, (struct lcd_display *) arg, - sizeof(struct lcd_display))) - return -EFAULT; - rom = kmalloc((128), GFP_ATOMIC); - if (rom == NULL) { - printk(KERN_ERR LCD "kmalloc() failed in %s\n", - __FUNCTION__); - return -ENOMEM; - } - - pr_info(LCD "Starting Flash burn\n"); - for (i = 0; i < FLASH_SIZE; i = i + 128) { - - if (copy_from_user - (rom, display.RomImage + i, 128)) { - kfree(rom); - return -EFAULT; - } - burn_addr = kFlashBase + i; - spin_lock_irqsave(&lcd_lock, flags); - for (index = 0; index < (128); index++) { - - WRITE_FLASH(kFlash_Addr1, - kFlash_Data1); - WRITE_FLASH(kFlash_Addr2, - kFlash_Data2); - WRITE_FLASH(kFlash_Addr1, - kFlash_Prog); - *((volatile unsigned char *)burn_addr) = - (volatile unsigned char) rom[index]; - - while ((!dqpoll (burn_addr, - (volatile unsigned char) - rom[index])) && - (!timeout(burn_addr))) { } - burn_addr++; - } - spin_unlock_irqrestore(&lcd_lock, flags); - if (* ((volatile unsigned char *) - (burn_addr - 1)) == - (volatile unsigned char) - rom[index - 1]) { - } else if (timeout) { - pr_info(LCD "Flash burn timed out\n"); - } - - - } - kfree(rom); - - pr_info(LCD "Flash successfully burned\n"); - - break; - } - -// read the flash all at once - - case FLASH_Read:{ - - unsigned char *user_bytes; - volatile unsigned long read_addr; - unsigned int i; - - user_bytes = - &(((struct lcd_display *) arg)->RomImage[0]); - - if (!access_ok - (VERIFY_WRITE, user_bytes, FLASH_SIZE)) - return -EFAULT; - - pr_info(LCD "Reading Flash"); - for (i = 0; i < FLASH_SIZE; i++) { - unsigned char tmp_byte; - read_addr = kFlashBase + i; - tmp_byte = - *((volatile unsigned char *) - read_addr); - if (__put_user(tmp_byte, &user_bytes[i])) - return -EFAULT; - } - - - break; - } - default: return -EINVAL; @@ -644,42 +512,6 @@ static void __exit lcd_exit(void) misc_deregister(&lcd_dev); } -// -// Function: dqpoll -// -// Description: Polls the data lines to see if the flash is busy -// -// In: address, byte data -// -// Out: 0 = busy, 1 = write or erase complete -// -// - -static int dqpoll(volatile unsigned long address, volatile unsigned char data) -{ - volatile unsigned char dq7; - - dq7 = data & 0x80; - - return ((READ_FLASH(address) & 0x80) == dq7); -} - -// -// Function: timeout -// -// Description: Checks to see if erase or write has timed out -// By polling dq5 -// -// In: address -// -// -// Out: 0 = not timed out, 1 = timed out - -static int timeout(volatile unsigned long address) -{ - return (READ_FLASH(address) & 0x20) == 0x20; -} - module_init(lcd_init); module_exit(lcd_exit); diff --git a/drivers/char/lcd.h b/drivers/char/lcd.h index a8d4ae737158..290b3ff23b03 100644 --- a/drivers/char/lcd.h +++ b/drivers/char/lcd.h @@ -14,11 +14,7 @@ // function headers -static int dqpoll(volatile unsigned long, volatile unsigned char ); -static int timeout(volatile unsigned long); - #define LCD_CHARS_PER_LINE 40 -#define FLASH_SIZE 524288 #define MAX_IDLE_TIME 120 struct lcd_display { @@ -54,26 +50,6 @@ struct lcd_display { #define LCDTimeoutValue 0xfff -// Flash definitions AMD 29F040 -#define kFlashBase 0x0FC00000 - -#define kFlash_Addr1 0x5555 -#define kFlash_Addr2 0x2AAA -#define kFlash_Data1 0xAA -#define kFlash_Data2 0x55 -#define kFlash_Prog 0xA0 -#define kFlash_Erase3 0x80 -#define kFlash_Erase6 0x10 -#define kFlash_Read 0xF0 - -#define kFlash_ID 0x90 -#define kFlash_VenAddr 0x00 -#define kFlash_DevAddr 0x01 -#define kFlash_VenID 0x01 -#define kFlash_DevID 0xA4 // 29F040 -//#define kFlash_DevID 0xAD // 29F016 - - // Macros #define LCDWriteData(x) outl((x << 24), kLCD_DR) @@ -89,9 +65,6 @@ struct lcd_display { #define WRITE_GAL(x,y) outl(y, 0x04000000 | (x)) #define BusyCheck() while ((LCDReadInst & 0x80) == 0x80) -#define WRITE_FLASH(x,y) outb((char)y, kFlashBase | (x)) -#define READ_FLASH(x) (inb(kFlashBase | (x))) - /* @@ -124,11 +97,6 @@ struct lcd_display { // Button defs #define BUTTON_Read 50 -// Flash command codes -#define FLASH_Erase 60 -#define FLASH_Burn 61 -#define FLASH_Read 62 - // Ethernet LINK check hackaroo #define LINK_Check 90 |