diff options
41 files changed, 49 insertions, 49 deletions
diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt index cc2450d80310..18dc52c4f2a0 100644 --- a/Documentation/DMA-attributes.txt +++ b/Documentation/DMA-attributes.txt @@ -98,5 +98,5 @@ DMA_ATTR_FORCE_CONTIGUOUS By default DMA-mapping subsystem is allowed to assemble the buffer allocated by dma_alloc_attrs() function from individual pages if it can be mapped as contiguous chunk into device dma address space. By -specifing this attribute the allocated buffer is forced to be contiguous +specifying this attribute the allocated buffer is forced to be contiguous also in physical memory. diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index af9b4a0d902b..aa71962352ff 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -114,5 +114,5 @@ Boards: - AM43x EPOS EVM compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43" -- DRA7 EVM: Software Developement Board for DRA7XX +- DRA7 EVM: Software Development Board for DRA7XX compatible = "ti,dra7-evm", "ti,dra7" diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt index 7586fb68c072..5fa44f52a0b8 100644 --- a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt +++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt @@ -197,7 +197,7 @@ to be set by the operating system and that are guaranteed to be free of overlaps with one another or with the system memory ranges. Each entry in the property refers to exactly one window. If the operating system -choses to use a different set of mbus windows, it must ensure that any address +chooses to use a different set of mbus windows, it must ensure that any address translations performed from downstream devices are adapted accordingly. The operating system may insert additional mbus windows that do not conflict diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt index 3ddc7ccfe5f3..c306a2d0f2b1 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt @@ -54,7 +54,7 @@ Optional device specific properties: IO 8-15 are bank 2. These chips have two different interrupt outputs: One for bank 1 and another for bank 2. If irq-mirror is set, both interrupts are generated regardless of the bank that an input change - occured on. If it is not set, the interrupt are only generated for the + occurred on. If it is not set, the interrupt are only generated for the bank they belong to. On devices with only one interrupt output this property is useless. diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt index b8653ea97957..e5bc49f764d1 100644 --- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -12,7 +12,7 @@ extensions to the Synopsys Designware Mobile Storage Host Controller. Required Properties: * compatible: should be one of the following. - - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extentions. + - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions. Example: diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt index 328e990d2546..42e0a9afa100 100644 --- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt @@ -3,7 +3,7 @@ Samsung's SDHCI controller is used as a connectivity interface with external MMC, SD and eMMC storage mediums. This file documents differences between the core mmc properties described by mmc.txt and the properties used by the -Samsung implmentation of the SDHCI controller. +Samsung implementation of the SDHCI controller. Required SoC Specific Properties: - compatible: should be one of the following diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 5e1f31b5ff70..eb05255b6788 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -43,7 +43,7 @@ Optional properties: ELM hardware engines should specify this device node in .dtsi Using ELM for ECC error correction frees some CPU cycles. -For inline partiton table parsing (optional): +For inline partition table parsing (optional): - #address-cells: should be set to 1 - #size-cells: should be set to 1 diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt index 420b3ab18890..4828c17bb784 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -30,7 +30,7 @@ Optional properties: - gpmc,XXX Additional GPMC timings and settings parameters. See Documentation/devicetree/bindings/bus/ti-gpmc.txt -Optional properties for partiton table parsing: +Optional properties for partition table parsing: - #address-cells: should be set to 1 - #size-cells: should be set to 1 diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt index b7529424ac88..5d8fa527c496 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -17,7 +17,7 @@ Optional properties: - dma-channel: DMA Channel index -For inline partiton table parsing (optional): +For inline partition table parsing (optional): - #address-cells: should be set to 1 - #size-cells: should be set to 1 diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt index c119debe6bab..54a6e821d525 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt @@ -73,9 +73,9 @@ Optional Properties (for standard pins): Otherwise: 0: fast slew rate 1: normal slew rate -- input-enable: No arguements. Enable input (does not affect +- input-enable: No arguments. Enable input (does not affect output.) -- input-disable: No arguements. Disable input (does not affect +- input-disable: No arguments. Disable input (does not affect output.) - drive-strength: Integer. Drive strength in mA. Valid values are 2, 4, 6, 8, 10, 12, 14, 16 mA. @@ -99,9 +99,9 @@ Optional Properties (for I2C pins): Otherwise: 0: fast slew rate 1: normal slew rate -- input-enable: No arguements. Enable input (does not affect +- input-enable: No arguments. Enable input (does not affect output.) -- input-disable: No arguements. Disable input (does not affect +- input-disable: No arguments. Disable input (does not affect output.) Optional Properties (for HDMI pins): @@ -111,9 +111,9 @@ Optional Properties (for HDMI pins): - slew-rate: Integer. Controls slew rate. 0: Standard(100kbps)& Fast(400kbps) mode 1: Highspeed (3.4Mbps) mode -- input-enable: No arguements. Enable input (does not affect +- input-enable: No arguments. Enable input (does not affect output.) -- input-disable: No arguements. Disable input (does not affect +- input-disable: No arguments. Disable input (does not affect output.) Example: diff --git a/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt index d7217260589c..5bc63551319e 100644 --- a/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt +++ b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt @@ -1,7 +1,7 @@ Reboot property to control system reboot on PPC4xx systems: By setting "reset_type" to one of the following values, the default -software reset mechanism may be overidden. Here the possible values of +software reset mechanism may be overridden. Here the possible values of "reset_type": 1 - PPC4xx core reset diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt index 9d54eb5a295f..18a88100af94 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt @@ -82,7 +82,7 @@ PROPERTIES Which event source asserted the interrupt is captured in an EPU Interrupt Status Register (EPISR0,EPISR1). - Interrupt numbers are lised in order (perfmon, event0, event1). + Interrupt numbers are listed in order (perfmon, event0, event1). - interrupt-parent Usage: required diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index e2c7f1e7251a..86074334e342 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -12,7 +12,7 @@ Optional properties: - regulator-allow-bypass: allow the regulator to go into bypass mode - <name>-supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) - For hardwares which support disabling ramp rate, it should be explicitly + For hardware which supports disabling ramp rate, it should be explicitly intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay. - regulator-enable-ramp-delay: The time taken, in microseconds, for the supply rail to reach the target voltage, plus/minus whatever tolerance the board diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index e5a4d1b4acfe..cc128ae6134a 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -61,7 +61,7 @@ contain the following properties. used for MISO. Defaults to 1 if not present. Some SPI controllers and devices support Dual and Quad SPI transfer mode. -It allows data in SPI system transfered in 2 wires(DUAL) or 4 wires(QUAD). +It allows data in the SPI system to be transferred in 2 wires(DUAL) or 4 wires(QUAD). Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is only 1(SINGLE), 2(DUAL) and 4(QUAD). Dual/Quad mode is not allowed when 3-wire mode is used. diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt index 7d61ceff956e..67a4087d53f9 100644 --- a/Documentation/dma-buf-sharing.txt +++ b/Documentation/dma-buf-sharing.txt @@ -217,7 +217,7 @@ NOTES: and then allow further {map,unmap}_dma_buf operations from any buffer-user from the migrated backing-storage. - If the exporter cannot fulfil the backing-storage constraints of the new + If the exporter cannot fulfill the backing-storage constraints of the new buffer-user device as requested, dma_buf_attach() would return an error to denote non-compatibility of the new buffer-sharing request with the current buffer. diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt index 46325eb2ea76..9417871b8758 100644 --- a/Documentation/dynamic-debug-howto.txt +++ b/Documentation/dynamic-debug-howto.txt @@ -321,7 +321,7 @@ nullarbor:~ # echo -n 'func svc_process -p' > nullarbor:~ # echo -n 'format "nfsd: READ" +p' > <debugfs>/dynamic_debug/control -// enable messages in files of which the pathes include string "usb" +// enable messages in files of which the paths include string "usb" nullarbor:~ # echo -n '*usb* +p' > <debugfs>/dynamic_debug/control // enable all messages diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 56c7e936430f..8bdc07c40b94 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -550,7 +550,7 @@ installs itself as: /sys/devices/systm/edac/test-instance in this directory are various controls, a symlink and one or more 'instance' -directorys. +directories. The standard default controls are: diff --git a/Documentation/fb/sm501.txt b/Documentation/fb/sm501.txt index 8d17aebd2648..187f3b3ccb6c 100644 --- a/Documentation/fb/sm501.txt +++ b/Documentation/fb/sm501.txt @@ -3,7 +3,7 @@ Configuration: You can pass the following kernel command line options to sm501 videoframebuffer: sm501fb.bpp= SM501 Display driver: - Specifiy bits-per-pixel if not specified by 'mode' + Specify bits-per-pixel if not specified by 'mode' sm501fb.mode= SM501 Display driver: Specify resolution as diff --git a/Documentation/fb/sstfb.txt b/Documentation/fb/sstfb.txt index 550ca775a4cb..13db1075e4a5 100644 --- a/Documentation/fb/sstfb.txt +++ b/Documentation/fb/sstfb.txt @@ -10,7 +10,7 @@ Introduction The main page is located at <http://sstfb.sourceforge.net>, and if you want the latest version, check out the CVS, as the driver is a work in progress, I feel uncomfortable with releasing tarballs of something - not completely working...Don't worry, it's still more than useable + not completely working...Don't worry, it's still more than usable (I eat my own dog food) Please read the Bug section, and report any success or failure to me diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index f00bee144add..d4fa7f52034e 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -234,7 +234,7 @@ Table 1-2: Contents of the status files (as of 2.6.30-rc7) ShdPnd bitmap of shared pending signals for the process SigBlk bitmap of blocked signals SigIgn bitmap of ignored signals - SigCgt bitmap of catched signals + SigCgt bitmap of caught signals CapInh bitmap of inheritable capabilities CapPrm bitmap of permitted capabilities CapEff bitmap of effective capabilities @@ -300,7 +300,7 @@ Table 1-4: Contents of the stat files (as of 2.6.30-rc7) pending bitmap of pending signals blocked bitmap of blocked signals sigign bitmap of ignored signals - sigcatch bitmap of catched signals + sigcatch bitmap of caught signals wchan address where process went to sleep 0 (place holder) 0 (place holder) diff --git a/Documentation/filesystems/sharedsubtree.txt b/Documentation/filesystems/sharedsubtree.txt index 4ede421c9687..32a173dd3158 100644 --- a/Documentation/filesystems/sharedsubtree.txt +++ b/Documentation/filesystems/sharedsubtree.txt @@ -727,7 +727,7 @@ replicas continue to be exactly same. mkdir -p /tmp/m3 mount --rbind /root /tmp/m3 - I wont' draw the tree..but it has 24 vfsmounts + I won't draw the tree..but it has 24 vfsmounts at step i the number of vfsmounts is V[i] = i*V[i-1]. diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt index e42f77d8d4ca..0ff8eb072749 100644 --- a/Documentation/gpio/consumer.txt +++ b/Documentation/gpio/consumer.txt @@ -41,7 +41,7 @@ Both functions return either a valid GPIO descriptor, or an error code checkable with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned if and only if no GPIO has been assigned to the device/function/index triplet, other error codes are used for cases where a GPIO has been assigned but an error -occured while trying to acquire it. This is useful to discriminate between mere +occurred while trying to acquire it. This is useful to discriminate between mere errors and an absence of GPIO for optional GPIO parameters. Device-managed variants of these functions are also defined: diff --git a/Documentation/hid/uhid.txt b/Documentation/hid/uhid.txt index dc35a2b75eee..31cabfd67497 100644 --- a/Documentation/hid/uhid.txt +++ b/Documentation/hid/uhid.txt @@ -114,7 +114,7 @@ the request was handled successfully. read() ------ -read() will return a queued ouput report. These output reports can be of type +read() will return a queued output report. These output reports can be of type UHID_START, UHID_STOP, UHID_OPEN, UHID_CLOSE, UHID_OUTPUT or UHID_OUTPUT_EV. No reaction is required to any of them but you should handle them according to your needs. Only UHID_OUTPUT and UHID_OUTPUT_EV have payloads. diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index e544c7ff8cfa..90bca6f988e1 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -94,7 +94,7 @@ PS/2 packet format Note that the device never signals overflow condition. -ALPS Absolute Mode - Protocol Verion 1 +ALPS Absolute Mode - Protocol Version 1 -------------------------------------- byte 0: 1 0 0 0 1 x9 x8 x7 diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt index 666c06c5ab0c..0acfddbe2028 100644 --- a/Documentation/input/input.txt +++ b/Documentation/input/input.txt @@ -226,7 +226,7 @@ And so on up to js31. ~~~~~~~~~~~ evdev is the generic input event interface. It passes the events generated in the kernel straight to the program, with timestamps. The -API is still evolving, but should be useable now. It's described in +API is still evolving, but should be usable now. It's described in section 5. This should be the way for GPM and X to get keyboard and mouse diff --git a/Documentation/mtd/nand/pxa3xx-nand.txt b/Documentation/mtd/nand/pxa3xx-nand.txt index 840fd41c181b..1074cbc67ec6 100644 --- a/Documentation/mtd/nand/pxa3xx-nand.txt +++ b/Documentation/mtd/nand/pxa3xx-nand.txt @@ -48,7 +48,7 @@ configurable between two modes: 1) Hamming, 2) BCH. Note that the actual BCH mode: BCH-4 or BCH-8 will depend on the way the controller is configured to transfer the data. -In the BCH mode the ECC code will be calculated for each transfered chunk +In the BCH mode the ECC code will be calculated for each transferred chunk and expected to be located (when reading/programming) right after the spare bytes as the figure above shows. diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 0cbe6ec22d6f..988be279a102 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -706,7 +706,7 @@ solution for a couple of reasons: RX_NO_AUTOTIMER: Prevent automatically starting the timeout monitor. - RX_ANNOUNCE_RESUME: If passed at RX_SETUP and a receive timeout occured, a + RX_ANNOUNCE_RESUME: If passed at RX_SETUP and a receive timeout occurred, a RX_CHANGED message will be generated when the (cyclic) receive restarts. TX_RESET_MULTI_IDX: Reset the index for the multiple frame transmission. diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index bf5dbe3ab8c5..55c575fcaf17 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -86,7 +86,7 @@ built-in CCIDs. DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same time, combining the operation of the next two socket options. This option is -preferrable over the latter two, since often applications will use the same +preferable over the latter two, since often applications will use the same type of CCID for both directions; and mixed use of CCIDs is not currently well understood. This socket option takes as argument at least one uint8_t value, or an array of uint8_t values, which must match available CCIDS (see above). CCIDs diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index dc23e58ae264..9791e98ab49c 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -160,7 +160,7 @@ To avoid this, when taking a signal in an active transaction, we need to use the stack pointer from the checkpointed state, rather than the speculated state. This ensures that the signal context (written tm suspended) will be written below the stack required for the rollback. The transaction is aborted -becuase of the treclaim, so any memory written between the tbegin and the +because of the treclaim, so any memory written between the tbegin and the signal will be rolled back anyway. For signals taken in non-TM or suspended mode, we use the diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt index 61b6c48871a0..39873ef41bf9 100644 --- a/Documentation/rbtree.txt +++ b/Documentation/rbtree.txt @@ -255,7 +255,7 @@ However, rbtree can be augmented to store such interval ranges in a structured way making it possible to do efficient lookup and exact match. This "extra information" stored in each node is the maximum hi -(max_hi) value among all the nodes that are its descendents. This +(max_hi) value among all the nodes that are its descendants. This information can be maintained at each node just be looking at the node and its immediate children. And this will be used in O(log n) lookup for lowest match (lowest start address among all possible matches) diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index f430004df73c..427e89712f4a 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -21,7 +21,7 @@ aircraft. The rfkill subsystem has a concept of "hard" and "soft" block, which differ little in their meaning (block == transmitters off) but rather in whether they can be changed or not: - - hard block: read-only radio block that cannot be overriden by software + - hard block: read-only radio block that cannot be overridden by software - soft block: writable radio block (need not be readable) that is set by the system software. diff --git a/Documentation/robust-futexes.txt b/Documentation/robust-futexes.txt index 0a9446a53bd1..af6fce23e484 100644 --- a/Documentation/robust-futexes.txt +++ b/Documentation/robust-futexes.txt @@ -210,7 +210,7 @@ i386 and x86_64 syscalls are wired up at the moment, and Ulrich has tested the new glibc code (on x86_64 and i386), and it works for his robust-mutex testcases. -All other architectures should build just fine too - but they wont have +All other architectures should build just fine too - but they won't have the new syscalls yet. Architectures need to implement the new futex_atomic_cmpxchg_inatomic() diff --git a/Documentation/s390/monreader.txt b/Documentation/s390/monreader.txt index beeaa4b24427..d3729585fdb0 100644 --- a/Documentation/s390/monreader.txt +++ b/Documentation/s390/monreader.txt @@ -10,7 +10,7 @@ Author: Gerald Schaefer (geraldsc@de.ibm.com) Description =========== This item delivers a new Linux API in the form of a misc char device that is -useable from user space and allows read access to the z/VM Monitor Records +usable from user space and allows read access to the z/VM Monitor Records collected by the *MONITOR System Service of z/VM. diff --git a/Documentation/security/Yama.txt b/Documentation/security/Yama.txt index dd908cf64ecf..227a63f018a2 100644 --- a/Documentation/security/Yama.txt +++ b/Documentation/security/Yama.txt @@ -37,7 +37,7 @@ still work as root). In mode 1, software that has defined application-specific relationships between a debugging process and its inferior (crash handlers, etc), prctl(PR_SET_PTRACER, pid, ...) can be used. An inferior can declare which -other process (and its descendents) are allowed to call PTRACE_ATTACH +other process (and its descendants) are allowed to call PTRACE_ATTACH against it. Only one such declared debugging process can exists for each inferior at a time. For example, this is used by KDE, Chromium, and Firefox's crash handlers, and by Wine for allowing only Wine processes diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index b8dd0df76952..7ccf933bfbe0 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -948,7 +948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. avoided as much as possible... MORE NOTES ON "azx_get_response timeout" PROBLEMS: - On some hardwares, you may need to add a proper probe_mask option + On some hardware, you may need to add a proper probe_mask option to avoid the "azx_get_response timeout" problem above, instead. This occurs when the access to non-existing or non-working codec slot (likely a modem one) causes a stall of the communication via HD-audio @@ -1124,7 +1124,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. buggy_irq - Enable workaround for buggy interrupts on some motherboards (default yes on nForce chips, otherwise off) - buggy_semaphore - Enable workaround for hardwares with buggy + buggy_semaphore - Enable workaround for hardware with buggy semaphores (e.g. on some ASUS laptops) (default off) spdif_aclink - Use S/PDIF over AC-link instead of direct connection diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index c94435df2037..75d25a1d6e42 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -443,7 +443,7 @@ The following commands are supported: The following command creates a snapshot every time a block request queue is unplugged with a depth > 1. If you were tracing a set of events or functions at the time, the snapshot trace buffer would - capture those events when the trigger event occured: + capture those events when the trigger event occurred: # echo 'snapshot if nr_rq > 1' > \ /sys/kernel/debug/tracing/events/block/block_unplug/trigger diff --git a/Documentation/usb/mass-storage.txt b/Documentation/usb/mass-storage.txt index 59063ad7a60d..e89803a5a960 100644 --- a/Documentation/usb/mass-storage.txt +++ b/Documentation/usb/mass-storage.txt @@ -13,7 +13,7 @@ operation. Note that the driver is slightly non-portable in that it assumes - a single memory/DMA buffer will be useable for bulk-in and bulk-out + a single memory/DMA buffer will be usable for bulk-in and bulk-out endpoints. With most device controllers this is not an issue, but there may be some with hardware restrictions that prevent a buffer from being used by more than one endpoint. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index a9380ba54c8e..fe97350c7b4d 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -2066,7 +2066,7 @@ the "Server" class MMU emulation supported by KVM. This can in turn be used by userspace to generate the appropriate device-tree properties for the guest operating system. -The structure contains some global informations, followed by an +The structure contains some global information, followed by an array of supported segment page sizes: struct kvm_ppc_smmu_info { diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt index 4a63953a41f1..6b31cfbe2a9a 100644 --- a/Documentation/vm/transhuge.txt +++ b/Documentation/vm/transhuge.txt @@ -360,13 +360,13 @@ on any tail page, would mean having to split all hugepages upfront in get_user_pages which is unacceptable as too many gup users are performance critical and they must work natively on hugepages like they work natively on hugetlbfs already (hugetlbfs is simpler because -hugetlbfs pages cannot be splitted so there wouldn't be requirement of +hugetlbfs pages cannot be split so there wouldn't be requirement of accounting the pins on the tail pages for hugetlbfs). If we wouldn't account the gup refcounts on the tail pages during gup, we won't know anymore which tail page is pinned by gup and which is not while we run split_huge_page. But we still have to add the gup pin to the head page too, to know when we can free the compound page in case it's never -splitted during its lifetime. That requires changing not just +split during its lifetime. That requires changing not just get_page, but put_page as well so that when put_page runs on a tail page (and only on a tail page) it will find its respective head page, and then it will decrease the head page refcount in addition to the diff --git a/Documentation/x86/earlyprintk.txt b/Documentation/x86/earlyprintk.txt index f19802c0f485..688e3eeed21d 100644 --- a/Documentation/x86/earlyprintk.txt +++ b/Documentation/x86/earlyprintk.txt @@ -33,7 +33,7 @@ and two USB cables, connected like this: ... ( If your system does not list a debug port capability then you probably - wont be able to use the USB debug key. ) + won't be able to use the USB debug key. ) b.) You also need a Netchip USB debug cable/key: diff --git a/Documentation/x86/i386/IO-APIC.txt b/Documentation/x86/i386/IO-APIC.txt index 30b4c714fbe1..15f5baf7e1b6 100644 --- a/Documentation/x86/i386/IO-APIC.txt +++ b/Documentation/x86/i386/IO-APIC.txt @@ -87,7 +87,7 @@ your PCI configuration: echo -n pirq=; echo `scanpci | grep T_L | cut -c56-` | sed 's/ /,/g' -note that this script wont work if you have skipped a few slots or if your +note that this script won't work if you have skipped a few slots or if your board does not do default daisy-chaining. (or the IO-APIC has the PIRQ pins connected in some strange way). E.g. if in the above case you have your SCSI card (IRQ11) in Slot3, and have Slot1 empty: |