diff options
-rw-r--r-- | include/linux/ieee80211.h | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 318fc1f705b1..abf0e5fe6d24 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1092,6 +1092,73 @@ struct ieee80211_ht_operation { #define WLAN_HT_SMPS_CONTROL_STATIC 1 #define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 +#define VHT_MCS_SUPPORTED_SET_SIZE 8 + +struct ieee80211_vht_capabilities { + __le32 vht_capabilities_info; + u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE]; +} __packed; + +struct ieee80211_vht_operation { + u8 vht_op_info_chwidth; + u8 vht_op_info_chan_center_freq_seg1_idx; + u8 vht_op_info_chan_center_freq_seg2_idx; + __le16 vht_basic_mcs_set; +} __packed; + +/** + * struct ieee80211_vht_mcs_info - VHT MCS information + * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams + * @rx_highest: Indicates highest long GI VHT PPDU data rate + * STA can receive. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. + * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams + * @tx_highest: Indicates highest long GI VHT PPDU data rate + * STA can transmit. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest TX data rate supported. + */ +struct ieee80211_vht_mcs_info { + __le16 rx_mcs_map; + __le16 rx_highest; + __le16 tx_mcs_map; + __le16 tx_highest; +} __packed; + +#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0 +#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1 +#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2 +#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3 + +/* 802.11ac VHT Capabilities */ +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 +#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 +#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 +#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 +#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 +#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 +#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 +#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 +#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 +#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 +#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 +#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 +#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT 0x00800000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 +#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 +#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 + /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 @@ -1352,6 +1419,9 @@ enum ieee80211_eid { WLAN_EID_DSE_REGISTERED_LOCATION = 58, WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59, WLAN_EID_EXT_CHANSWITCH_ANN = 60, + + WLAN_EID_VHT_CAPABILITY = 191, + WLAN_EID_VHT_OPERATION = 192, }; /* Action category code */ |