diff options
47 files changed, 540 insertions, 853 deletions
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt index f65c76db9859..97d9b3e1bf39 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt @@ -37,6 +37,12 @@ The edge is described by the following properties: Definition: the identifier of the remote processor in the smd channel allocation table +- qcom,remote-pid: + Usage: optional + Value type: <u32> + Definition: the identifier for the remote processor as known by the rest + of the system. + = SMD DEVICES In turn, subnodes of the "edges" represent devices tied to SMD channels on that diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index a5863acc5fff..540a0adf2be6 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -116,6 +116,21 @@ min-microvolt = <1100000>; max-microvolt = <2700000>; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Correspond to 500MHz at freq_table */ + cooling-device = <&cpu0 5 5>; + }; + map1 { + /* Correspond to 200MHz at freq_table */ + cooling-device = <&cpu0 8 8>; + }; + }; + }; + }; }; &adc { @@ -141,6 +156,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &exynos_usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index baa9b2f52009..41a5fafb9aa9 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -107,6 +107,21 @@ min-microvolt = <1100000>; max-microvolt = <2700000>; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 500MHz */ + cooling-device = <&cpu0 5 5>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 8 8>; + }; + }; + }; + }; }; &adc { @@ -132,6 +147,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &exynos_usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 2db99433e17f..033def482fc3 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -53,6 +53,22 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; + clocks = <&cmu CLK_ARM_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; + + operating-points = < + 1000000 1150000 + 900000 1112500 + 800000 1075000 + 700000 1037500 + 600000 1000000 + 500000 962500 + 400000 925000 + 300000 887500 + 200000 850000 + 100000 850000 + >; }; cpu1: cpu@1 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index b0d52b1a646a..98c0a368b777 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -702,6 +702,7 @@ clocks = <&clock CLK_JPEG>; clock-names = "jpeg"; power-domains = <&pd_cam>; + iommus = <&sysmmu_jpeg>; }; hdmi: hdmi@12D00000 { diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index d9c8efeef208..538901123d37 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -30,6 +30,9 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; cooling-min-level = <13>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ @@ -39,6 +42,84 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp01 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + opp03 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <950000>; + clock-latency-ns = <200000>; + }; + opp04 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + clock-latency-ns = <200000>; + }; + opp05 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + opp06 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <200000>; + }; + opp07 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <200000>; + }; + opp08 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1087500>; + clock-latency-ns = <200000>; + }; + opp09 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <200000>; + }; + opp10 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1187500>; + clock-latency-ns = <200000>; + }; + opp11 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <200000>; + }; + opp12 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1287500>; + clock-latency-ns = <200000>; + }; + opp13 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + turbo-mode; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index ca7d168d1dd6..db52841297a5 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -107,6 +107,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + /* RSTN signal for eMMC */ &sd1_cd { samsung,pin-pud = <0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 44684e57ead1..8632f35c6c26 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "exynos4412-odroid-common.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Hardkernel ODROID-U3 board based on Exynos4412"; @@ -61,3 +62,10 @@ "Speakers", "SPKL", "Speakers", "SPKR"; }; + +&spi_1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 84c76310b312..9d528af68c1a 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -78,6 +78,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &fimd { pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 884840059018..2a1ebb76ebe0 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -288,6 +288,10 @@ status = "okay"; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &csis_0 { status = "okay"; vddcore-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index b78ada70bd05..ca0e3c15977f 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -30,6 +30,9 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; cooling-min-level = <13>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ @@ -39,18 +42,98 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@A02 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA02>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@A03 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA03>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp01 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + opp03 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <950000>; + clock-latency-ns = <200000>; + }; + opp04 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + clock-latency-ns = <200000>; + }; + opp05 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + opp06 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <200000>; + }; + opp07 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <200000>; + }; + opp08 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1087500>; + clock-latency-ns = <200000>; + }; + opp09 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <200000>; + }; + opp10 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1187500>; + clock-latency-ns = <200000>; + }; + opp11 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <200000>; + }; + opp12 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1287500>; + clock-latency-ns = <200000>; + }; + opp13 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + turbo-mode; }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 7e728a1b5559..db3f65f3eb45 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -117,6 +117,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &dp { status = "okay"; samsung,color-space = <0>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 4fe186d01f8a..15aea760c1da 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -74,6 +74,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &dp { samsung,color-space = <0>; samsung,dynamic-range = <0>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index b7f4122df456..0720caab5511 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -235,6 +235,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; @@ -688,6 +692,7 @@ status = "okay"; samsung,spi-src-clk = <0>; num-cs = <1>; + cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; }; &usbdrd_dwc3 { diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index d03f9b8d376d..c1edd6d038a9 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -65,6 +65,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 4a1f88300a28..b24610ea8c2a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -62,6 +62,28 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1700000000>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <140000>; + + operating-points = < + 1700000 1300000 + 1600000 1250000 + 1500000 1225000 + 1400000 1200000 + 1300000 1150000 + 1200000 1125000 + 1100000 1100000 + 1000000 1075000 + 900000 1050000 + 800000 1025000 + 700000 1012500 + 600000 1000000 + 500000 975000 + 400000 950000 + 300000 937500 + 200000 925000 + >; cooling-min-level = <15>; cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi new file mode 100644 index 000000000000..b7f60c855459 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -0,0 +1,81 @@ +/* + * SAMSUNG EXYNOS5422 SoC cpu device tree source + * + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * The only difference between EXYNOS5422 and EXYNOS5800 is cpu ordering. The + * EXYNOS5422 is booting from Cortex-A7 core while the EXYNOS5800 is booting + * from Cortex-A15 core. + * + * EXYNOS5422 based board files can include this file to provide cpu ordering + * which could boot a cortex-a7 from cpu0. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&cpu0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; +}; + +&cpu1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; +}; + +&cpu2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; +}; + +&cpu3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; +}; + +&cpu4 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; +}; + +&cpu5 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; +}; + +&cpu6 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; +}; + +&cpu7 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 1565667e6f69..79ffdfe712aa 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/sound/samsung-i2s.h> #include "exynos5800.dtsi" +#include "exynos5422-cpus.dtsi" #include "exynos5422-cpu-thermal.dtsi" / { diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 34ccb260f12a..47c0282bdfca 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -4,6 +4,14 @@ model = "CompuLab CM-QS600"; compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; + aliases { + serial0 = &gsbi7_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { pinctrl@800000 { i2c1_pins: i2c1 { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 88d6655ddaf6..f3100da082b2 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -10,6 +10,10 @@ serial1 = &gsbi6_serial; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { pinctrl@800000 { card_detect: card_detect { diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index d484d08163e9..835bdc71c5ba 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -6,6 +6,14 @@ model = "Qualcomm APQ8074 Dragonboard"; compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { serial@f991e000 { status = "ok"; diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts index f7725b96612c..c9c2b769554f 100644 --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -5,6 +5,14 @@ model = "Qualcomm APQ8084/IFC6540"; compatible = "qcom,apq8084-ifc6540", "qcom,apq8084"; + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { serial@f995e000 { status = "okay"; diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index cb43acfc5d1d..3016c7048d44 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -5,6 +5,14 @@ model = "Qualcomm APQ 8084-MTP"; compatible = "qcom,apq8084-mtp", "qcom,apq8084"; + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { serial@f995e000 { status = "okay"; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 7084010ee61b..0554fbd72c40 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -234,7 +234,7 @@ interrupts = <0 208 0>; }; - serial@f995e000 { + blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; interrupts = <0 114 0x0>; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 55b2910efd87..d501382493e3 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -4,6 +4,14 @@ model = "Qualcomm IPQ8064/AP148"; compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 9f727d8eadf6..fa698635eea0 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -197,7 +197,7 @@ syscon-tcsr = <&tcsr>; - serial@16340000 { + gsbi4_serial: serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, <0x16300000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index e0883c376248..b17f379e8c2a 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -6,6 +6,14 @@ model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; + aliases { + serial0 = &gsbi12_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { gsbi@19c00000 { status = "ok"; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index ef2fe72b54c9..e5f7f33aa467 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -98,7 +98,7 @@ syscon-tcsr = <&tcsr>; - serial@19c40000 { + gsbi12_serial: serial@19c40000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index fad71d5527b0..b72a55462caf 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -6,6 +6,14 @@ model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + aliases { + serial0 = &gsbi5_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { gsbi@16400000 { status = "ok"; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 2096a94c9b52..134cd91d68ec 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -157,7 +157,7 @@ syscon-tcsr = <&tcsr>; - serial@16440000 { + gsbi5_serial: serial@16440000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 9bc72a3356e4..016f9ad9392a 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -6,6 +6,14 @@ model = "Sony Xperia Z1"; compatible = "sony,xperia-honami", "qcom,msm8974"; + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { reg = <0 0x40000000>, <0x40000000 0x40000000>; device_type = "memory"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index d7c99b894a49..ab8e57250468 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -259,7 +259,7 @@ hwlocks = <&tcsr_mutex 3>; }; - serial@f991e000 { + blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; interrupts = <0 108 0x0>; diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 3eaf8fbaf603..1ff2bfa2e183 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -27,6 +27,8 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_VFP=y @@ -94,6 +96,7 @@ CONFIG_CHARGER_MAX14577=y CONFIG_CHARGER_MAX77693=y CONFIG_CHARGER_TPS65090=y CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_NTC_THERMISTOR=y CONFIG_SENSORS_PWM_FAN=y CONFIG_SENSORS_INA2XX=y CONFIG_THERMAL=y @@ -144,6 +147,8 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_SNOW=y +CONFIG_SND_SOC_ODROIDX2=y +CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_XHCI_HCD=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index f84471d5d2db..03deb7fb35e8 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -362,6 +362,7 @@ CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_RMOBILE=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y +CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_RCAR_THERMAL=y @@ -410,7 +411,9 @@ CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_MAX77693=m +CONFIG_REGULATOR_MAX77802=m CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_PWM=m CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y @@ -509,8 +512,6 @@ CONFIG_USB_CHIPIDEA_HOST=y CONFIG_AB8500_USB=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_OMAP_USB3=y -CONFIG_SAMSUNG_USB2PHY=y -CONFIG_SAMSUNG_USB3PHY=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y @@ -635,6 +636,7 @@ CONFIG_EXTCON=y CONFIG_TI_AEMIF=y CONFIG_IIO=y CONFIG_AT91_ADC=m +CONFIG_EXYNOS_ADC=m CONFIG_XILINX_XADC=y CONFIG_AK8975=y CONFIG_PWM=y diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 4c4858c566d8..3a10f1a8317a 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -15,6 +15,7 @@ menuconfig ARCH_EXYNOS select ARM_AMBA select ARM_GIC select COMMON_CLK_SAMSUNG + select EXYNOS_THERMAL select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -24,6 +25,7 @@ menuconfig ARCH_EXYNOS select PM_GENERIC_DOMAINS if PM select S5P_DEV_MFC select SRAM + select THERMAL select MFD_SYSCON help Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 5f8ddcdeeacf..1c47aee31e9c 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -225,7 +225,11 @@ static void __init exynos_init_irq(void) } static const struct of_device_id exynos_cpufreq_matches[] = { + { .compatible = "samsung,exynos3250", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" }, + { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" }, + { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" }, + { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" }, { /* sentinel */ } }; diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index 251f48dcd12d..7f370d3e0983 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -1398,6 +1398,45 @@ static const struct exynos_cpuclk_cfg_data e4210_armclk_d[] __initconst = { { 0 }, }; +static const struct exynos_cpuclk_cfg_data e4212_armclk_d[] __initconst = { + { 1500000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4210_CPU_DIV1(2, 6), }, + { 1400000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4210_CPU_DIV1(2, 6), }, + { 1300000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4210_CPU_DIV1(2, 5), }, + { 1200000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4210_CPU_DIV1(2, 5), }, + { 1100000, E4210_CPU_DIV0(2, 1, 4, 0, 6, 3), E4210_CPU_DIV1(2, 4), }, + { 1000000, E4210_CPU_DIV0(1, 1, 4, 0, 5, 2), E4210_CPU_DIV1(2, 4), }, + { 900000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4210_CPU_DIV1(2, 3), }, + { 800000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4210_CPU_DIV1(2, 3), }, + { 700000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), }, + { 600000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), }, + { 500000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), }, + { 400000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), }, + { 300000, E4210_CPU_DIV0(1, 1, 2, 0, 4, 2), E4210_CPU_DIV1(2, 3), }, + { 200000, E4210_CPU_DIV0(1, 1, 1, 0, 3, 1), E4210_CPU_DIV1(2, 3), }, + { 0 }, +}; + +#define E4412_CPU_DIV1(cores, hpm, copy) \ + (((cores) << 8) | ((hpm) << 4) | ((copy) << 0)) + +static const struct exynos_cpuclk_cfg_data e4412_armclk_d[] __initconst = { + { 1500000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4412_CPU_DIV1(7, 0, 6), }, + { 1400000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4412_CPU_DIV1(6, 0, 6), }, + { 1300000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4412_CPU_DIV1(6, 0, 5), }, + { 1200000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4412_CPU_DIV1(5, 0, 5), }, + { 1100000, E4210_CPU_DIV0(2, 1, 4, 0, 6, 3), E4412_CPU_DIV1(5, 0, 4), }, + { 1000000, E4210_CPU_DIV0(1, 1, 4, 0, 5, 2), E4412_CPU_DIV1(4, 0, 4), }, + { 900000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4412_CPU_DIV1(4, 0, 3), }, + { 800000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4412_CPU_DIV1(3, 0, 3), }, + { 700000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4412_CPU_DIV1(3, 0, 3), }, + { 600000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4412_CPU_DIV1(2, 0, 3), }, + { 500000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4412_CPU_DIV1(2, 0, 3), }, + { 400000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4412_CPU_DIV1(1, 0, 3), }, + { 300000, E4210_CPU_DIV0(1, 1, 2, 0, 4, 2), E4412_CPU_DIV1(1, 0, 3), }, + { 200000, E4210_CPU_DIV0(1, 1, 1, 0, 3, 1), E4412_CPU_DIV1(0, 0, 3), }, + { 0 }, +}; + /* register exynos4 clocks */ static void __init exynos4_clk_init(struct device_node *np, enum exynos4_soc soc) @@ -1491,6 +1530,17 @@ static void __init exynos4_clk_init(struct device_node *np, samsung_clk_register_fixed_factor(ctx, exynos4x12_fixed_factor_clks, ARRAY_SIZE(exynos4x12_fixed_factor_clks)); + if (of_machine_is_compatible("samsung,exynos4412")) { + exynos_register_cpu_clock(ctx, CLK_ARM_CLK, "armclk", + mout_core_p4x12[0], mout_core_p4x12[1], 0x14200, + e4412_armclk_d, ARRAY_SIZE(e4412_armclk_d), + CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1); + } else { + exynos_register_cpu_clock(ctx, CLK_ARM_CLK, "armclk", + mout_core_p4x12[0], mout_core_p4x12[1], 0x14200, + e4212_armclk_d, ARRAY_SIZE(e4212_armclk_d), + CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1); + } } samsung_clk_register_alias(ctx, exynos4_aliases, diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 77aa34eae92c..5f498d9f1825 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -24,55 +24,6 @@ config ARM_VEXPRESS_SPC_CPUFREQ This add the CPUfreq driver support for Versatile Express big.LITTLE platforms using SPC for power management. - -config ARM_EXYNOS_CPUFREQ - tristate "SAMSUNG EXYNOS CPUfreq Driver" - depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 - depends on THERMAL - help - This adds the CPUFreq driver for Samsung EXYNOS platforms. - Supported SoC versions are: - Exynos4210, Exynos4212, Exynos4412, and Exynos5250. - - If in doubt, say N. - -config ARM_EXYNOS4X12_CPUFREQ - bool "SAMSUNG EXYNOS4x12" - depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 - depends on ARM_EXYNOS_CPUFREQ - default y - help - This adds the CPUFreq driver for Samsung EXYNOS4X12 - SoC (EXYNOS4212 or EXYNOS4412). - - If in doubt, say N. - -config ARM_EXYNOS5250_CPUFREQ - bool "SAMSUNG EXYNOS5250" - depends on SOC_EXYNOS5250 - depends on ARM_EXYNOS_CPUFREQ - default y - help - This adds the CPUFreq driver for Samsung EXYNOS5250 - SoC. - - If in doubt, say N. - -config ARM_EXYNOS_CPU_FREQ_BOOST_SW - bool "EXYNOS Frequency Overclocking - Software" - depends on ARM_EXYNOS_CPUFREQ && THERMAL - select CPU_FREQ_BOOST_SW - select EXYNOS_THERMAL - help - This driver supports software managed overclocking (BOOST). - It allows usage of special frequencies for Samsung Exynos - processors if thermal conditions are appropriate. - - It requires, for safe operation, thermal framework with properly - defined trip points. - - If in doubt, say N. - config ARM_EXYNOS5440_CPUFREQ tristate "SAMSUNG EXYNOS5440" depends on SOC_EXYNOS5440 diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 60a57ca5b22d..41340384f11f 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -52,10 +52,6 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o -arm-exynos-cpufreq-y := exynos-cpufreq.o -arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o -arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c deleted file mode 100644 index fa3dd840a837..000000000000 --- a/drivers/cpufreq/exynos-cpufreq.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - CPU frequency scaling support for EXYNOS series - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/regulator/consumer.h> -#include <linux/cpufreq.h> -#include <linux/platform_device.h> -#include <linux/of.h> -#include <linux/cpu_cooling.h> -#include <linux/cpu.h> - -#include "exynos-cpufreq.h" - -static struct exynos_dvfs_info *exynos_info; -static struct thermal_cooling_device *cdev; -static struct regulator *arm_regulator; -static unsigned int locking_frequency; - -static int exynos_cpufreq_get_index(unsigned int freq) -{ - struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - struct cpufreq_frequency_table *pos; - - cpufreq_for_each_entry(pos, freq_table) - if (pos->frequency == freq) - break; - - if (pos->frequency == CPUFREQ_TABLE_END) - return -EINVAL; - - return pos - freq_table; -} - -static int exynos_cpufreq_scale(unsigned int target_freq) -{ - struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - unsigned int *volt_table = exynos_info->volt_table; - struct cpufreq_policy *policy = cpufreq_cpu_get(0); - unsigned int arm_volt, safe_arm_volt = 0; - unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz; - struct device *dev = exynos_info->dev; - unsigned int old_freq; - int index, old_index; - int ret = 0; - - old_freq = policy->cur; - - /* - * The policy max have been changed so that we cannot get proper - * old_index with cpufreq_frequency_table_target(). Thus, ignore - * policy and get the index from the raw frequency table. - */ - old_index = exynos_cpufreq_get_index(old_freq); - if (old_index < 0) { - ret = old_index; - goto out; - } - - index = exynos_cpufreq_get_index(target_freq); - if (index < 0) { - ret = index; - goto out; - } - - /* - * ARM clock source will be changed APLL to MPLL temporary - * To support this level, need to control regulator for - * required voltage level - */ - if (exynos_info->need_apll_change != NULL) { - if (exynos_info->need_apll_change(old_index, index) && - (freq_table[index].frequency < mpll_freq_khz) && - (freq_table[old_index].frequency < mpll_freq_khz)) - safe_arm_volt = volt_table[exynos_info->pll_safe_idx]; - } - arm_volt = volt_table[index]; - - /* When the new frequency is higher than current frequency */ - if ((target_freq > old_freq) && !safe_arm_volt) { - /* Firstly, voltage up to increase frequency */ - ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt); - if (ret) { - dev_err(dev, "failed to set cpu voltage to %d\n", - arm_volt); - return ret; - } - } - - if (safe_arm_volt) { - ret = regulator_set_voltage(arm_regulator, safe_arm_volt, - safe_arm_volt); - if (ret) { - dev_err(dev, "failed to set cpu voltage to %d\n", - safe_arm_volt); - return ret; - } - } - - exynos_info->set_freq(old_index, index); - - /* When the new frequency is lower than current frequency */ - if ((target_freq < old_freq) || - ((target_freq > old_freq) && safe_arm_volt)) { - /* down the voltage after frequency change */ - ret = regulator_set_voltage(arm_regulator, arm_volt, - arm_volt); - if (ret) { - dev_err(dev, "failed to set cpu voltage to %d\n", - arm_volt); - goto out; - } - } - -out: - cpufreq_cpu_put(policy); - - return ret; -} - -static int exynos_target(struct cpufreq_policy *policy, unsigned int index) -{ - return exynos_cpufreq_scale(exynos_info->freq_table[index].frequency); -} - -static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - policy->clk = exynos_info->cpu_clk; - policy->suspend_freq = locking_frequency; - return cpufreq_generic_init(policy, exynos_info->freq_table, 100000); -} - -static struct cpufreq_driver exynos_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = exynos_target, - .get = cpufreq_generic_get, - .init = exynos_cpufreq_cpu_init, - .name = "exynos_cpufreq", - .attr = cpufreq_generic_attr, -#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW - .boost_supported = true, -#endif -#ifdef CONFIG_PM - .suspend = cpufreq_generic_suspend, -#endif -}; - -static int exynos_cpufreq_probe(struct platform_device *pdev) -{ - struct device_node *cpu0; - int ret = -EINVAL; - - exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL); - if (!exynos_info) - return -ENOMEM; - - exynos_info->dev = &pdev->dev; - - if (of_machine_is_compatible("samsung,exynos4212")) { - exynos_info->type = EXYNOS_SOC_4212; - ret = exynos4x12_cpufreq_init(exynos_info); - } else if (of_machine_is_compatible("samsung,exynos4412")) { - exynos_info->type = EXYNOS_SOC_4412; - ret = exynos4x12_cpufreq_init(exynos_info); - } else if (of_machine_is_compatible("samsung,exynos5250")) { - exynos_info->type = EXYNOS_SOC_5250; - ret = exynos5250_cpufreq_init(exynos_info); - } else { - pr_err("%s: Unknown SoC type\n", __func__); - ret = -ENODEV; - } - - if (ret) - goto err_vdd_arm; - - if (exynos_info->set_freq == NULL) { - dev_err(&pdev->dev, "No set_freq function (ERR)\n"); - ret = -EINVAL; - goto err_vdd_arm; - } - - arm_regulator = regulator_get(NULL, "vdd_arm"); - if (IS_ERR(arm_regulator)) { - dev_err(&pdev->dev, "failed to get resource vdd_arm\n"); - ret = -EINVAL; - goto err_vdd_arm; - } - - /* Done here as we want to capture boot frequency */ - locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000; - - ret = cpufreq_register_driver(&exynos_driver); - if (ret) - goto err_cpufreq_reg; - - cpu0 = of_get_cpu_node(0, NULL); - if (!cpu0) { - pr_err("failed to find cpu0 node\n"); - return 0; - } - - if (of_find_property(cpu0, "#cooling-cells", NULL)) { - cdev = of_cpufreq_cooling_register(cpu0, - cpu_present_mask); - if (IS_ERR(cdev)) - pr_err("running cpufreq without cooling device: %ld\n", - PTR_ERR(cdev)); - } - - return 0; - -err_cpufreq_reg: - dev_err(&pdev->dev, "failed to register cpufreq driver\n"); - regulator_put(arm_regulator); -err_vdd_arm: - kfree(exynos_info); - return ret; -} - -static struct platform_driver exynos_cpufreq_platdrv = { - .driver = { - .name = "exynos-cpufreq", - }, - .probe = exynos_cpufreq_probe, -}; -module_platform_driver(exynos_cpufreq_platdrv); diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h deleted file mode 100644 index a3855e4d913d..000000000000 --- a/drivers/cpufreq/exynos-cpufreq.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - CPUFreq support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -enum cpufreq_level_index { - L0, L1, L2, L3, L4, - L5, L6, L7, L8, L9, - L10, L11, L12, L13, L14, - L15, L16, L17, L18, L19, - L20, -}; - -enum exynos_soc_type { - EXYNOS_SOC_4212, - EXYNOS_SOC_4412, - EXYNOS_SOC_5250, -}; - -#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \ - { \ - .freq = (f) * 1000, \ - .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \ - (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \ - .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \ - .mps = ((m) << 16 | (p) << 8 | (s)), \ - } - -struct apll_freq { - unsigned int freq; - u32 clk_div_cpu0; - u32 clk_div_cpu1; - u32 mps; -}; - -struct exynos_dvfs_info { - enum exynos_soc_type type; - struct device *dev; - unsigned long mpll_freq_khz; - unsigned int pll_safe_idx; - struct clk *cpu_clk; - unsigned int *volt_table; - struct cpufreq_frequency_table *freq_table; - void (*set_freq)(unsigned int, unsigned int); - bool (*need_apll_change)(unsigned int, unsigned int); - void __iomem *cmu_regs; -}; - -#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ -extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *); -#else -static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) -{ - return -EOPNOTSUPP; -} -#endif -#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ -extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *); -#else -static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) -{ - return -EOPNOTSUPP; -} -#endif - -#define EXYNOS4_CLKSRC_CPU 0x14200 -#define EXYNOS4_CLKMUX_STATCPU 0x14400 - -#define EXYNOS4_CLKDIV_CPU 0x14500 -#define EXYNOS4_CLKDIV_CPU1 0x14504 -#define EXYNOS4_CLKDIV_STATCPU 0x14600 -#define EXYNOS4_CLKDIV_STATCPU1 0x14604 - -#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16) -#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT) - -#define EXYNOS5_APLL_LOCK 0x00000 -#define EXYNOS5_APLL_CON0 0x00100 -#define EXYNOS5_CLKMUX_STATCPU 0x00400 -#define EXYNOS5_CLKDIV_CPU0 0x00500 -#define EXYNOS5_CLKDIV_CPU1 0x00504 -#define EXYNOS5_CLKDIV_STATCPU0 0x00600 -#define EXYNOS5_CLKDIV_STATCPU1 0x00604 diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c deleted file mode 100644 index 9e78a850e29f..000000000000 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4X12 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include "exynos-cpufreq.h" - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; -static struct exynos_dvfs_info *cpufreq; - -static unsigned int exynos4x12_volt_table[] = { - 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500, - 1000000, 987500, 975000, 950000, 925000, 900000, 900000 -}; - -static struct cpufreq_frequency_table exynos4x12_freq_table[] = { - {CPUFREQ_BOOST_FREQ, L0, 1500 * 1000}, - {0, L1, 1400 * 1000}, - {0, L2, 1300 * 1000}, - {0, L3, 1200 * 1000}, - {0, L4, 1100 * 1000}, - {0, L5, 1000 * 1000}, - {0, L6, 900 * 1000}, - {0, L7, 800 * 1000}, - {0, L8, 700 * 1000}, - {0, L9, 600 * 1000}, - {0, L10, 500 * 1000}, - {0, L11, 400 * 1000}, - {0, L12, 300 * 1000}, - {0, L13, 200 * 1000}, - {0, 0, CPUFREQ_TABLE_END}, -}; - -static struct apll_freq *apll_freq_4x12; - -static struct apll_freq apll_freq_4212[] = { - /* - * values: - * freq - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2 - * clock divider for COPY, HPM, RESERVED - * PLL M, P, S - */ - APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0), - APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0), - APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0), - APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0), - APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0), - APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0), - APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0), - APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1), - APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1), - APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1), - APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1), - APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2), - APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2), -}; - -static struct apll_freq apll_freq_4412[] = { - /* - * values: - * freq - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2 - * clock divider for COPY, HPM, CORES - * PLL M, P, S - */ - APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0), - APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0), - APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0), - APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0), - APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0), - APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0), - APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0), - APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1), - APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1), - APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1), - APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1), - APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2), - APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2), -}; - -static void exynos4x12_set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = apll_freq_4x12[div_index].clk_div_cpu0; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU); - - while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU) - & 0x11111111) - cpu_relax(); - - /* Change Divider - CPU1 */ - tmp = apll_freq_4x12[div_index].clk_div_cpu1; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1); - - do { - cpu_relax(); - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1); - } while (tmp != 0x0); -} - -static void exynos4x12_set_apll(unsigned int index) -{ - unsigned int tmp, freq = apll_freq_4x12[index].freq; - - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - cpu_relax(); - tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU) - >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); - tmp &= 0x7; - } while (tmp != 0x2); - - clk_set_rate(mout_apll, freq * 1000); - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - cpu_relax(); - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU); - tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; - } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); -} - -static void exynos4x12_set_frequency(unsigned int old_index, - unsigned int new_index) -{ - if (old_index > new_index) { - exynos4x12_set_clkdiv(new_index); - exynos4x12_set_apll(new_index); - } else if (old_index < new_index) { - exynos4x12_set_apll(new_index); - exynos4x12_set_clkdiv(new_index); - } -} - -int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) -{ - struct device_node *np; - unsigned long rate; - - /* - * HACK: This is a temporary workaround to get access to clock - * controller registers directly and remove static mappings and - * dependencies on platform headers. It is necessary to enable - * Exynos multi-platform support and will be removed together with - * this whole driver as soon as Exynos gets migrated to use - * cpufreq-dt driver. - */ - np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock"); - if (!np) { - pr_err("%s: failed to find clock controller DT node\n", - __func__); - return -ENODEV; - } - - info->cmu_regs = of_iomap(np, 0); - if (!info->cmu_regs) { - pr_err("%s: failed to map CMU registers\n", __func__); - return -EFAULT; - } - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "moutcore"); - if (IS_ERR(moutcore)) - goto err_moutcore; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto err_mout_mpll; - - rate = clk_get_rate(mout_mpll) / 1000; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto err_mout_apll; - - if (info->type == EXYNOS_SOC_4212) - apll_freq_4x12 = apll_freq_4212; - else - apll_freq_4x12 = apll_freq_4412; - - info->mpll_freq_khz = rate; - /* 800Mhz */ - info->pll_safe_idx = L7; - info->cpu_clk = cpu_clk; - info->volt_table = exynos4x12_volt_table; - info->freq_table = exynos4x12_freq_table; - info->set_freq = exynos4x12_set_frequency; - - cpufreq = info; - - return 0; - -err_mout_apll: - clk_put(mout_mpll); -err_mout_mpll: - clk_put(moutcore); -err_moutcore: - clk_put(cpu_clk); - - pr_debug("%s: failed initialization\n", __func__); - return -EINVAL; -} diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c deleted file mode 100644 index 3eafdc7ba787..000000000000 --- a/drivers/cpufreq/exynos5250-cpufreq.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright (c) 2010-20122Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS5250 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include "exynos-cpufreq.h" - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; -static struct exynos_dvfs_info *cpufreq; - -static unsigned int exynos5250_volt_table[] = { - 1300000, 1250000, 1225000, 1200000, 1150000, - 1125000, 1100000, 1075000, 1050000, 1025000, - 1012500, 1000000, 975000, 950000, 937500, - 925000 -}; - -static struct cpufreq_frequency_table exynos5250_freq_table[] = { - {0, L0, 1700 * 1000}, - {0, L1, 1600 * 1000}, - {0, L2, 1500 * 1000}, - {0, L3, 1400 * 1000}, - {0, L4, 1300 * 1000}, - {0, L5, 1200 * 1000}, - {0, L6, 1100 * 1000}, - {0, L7, 1000 * 1000}, - {0, L8, 900 * 1000}, - {0, L9, 800 * 1000}, - {0, L10, 700 * 1000}, - {0, L11, 600 * 1000}, - {0, L12, 500 * 1000}, - {0, L13, 400 * 1000}, - {0, L14, 300 * 1000}, - {0, L15, 200 * 1000}, - {0, 0, CPUFREQ_TABLE_END}, -}; - -static struct apll_freq apll_freq_5250[] = { - /* - * values: - * freq - * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 - * clock divider for COPY, HPM, RESERVED - * PLL M, P, S - */ - APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0), - APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0), - APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0), - APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0), - APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0), - APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0), - APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0), - APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0), - APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0), - APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1), - APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1), - APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1), - APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1), - APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2), - APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2), -}; - -static void set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = apll_freq_5250[div_index].clk_div_cpu0; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0); - - while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0) - & 0x11111111) - cpu_relax(); - - /* Change Divider - CPU1 */ - tmp = apll_freq_5250[div_index].clk_div_cpu1; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1); - - while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11) - cpu_relax(); -} - -static void set_apll(unsigned int index) -{ - unsigned int tmp; - unsigned int freq = apll_freq_5250[index].freq; - - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - cpu_relax(); - tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU) - >> 16); - tmp &= 0x7; - } while (tmp != 0x2); - - clk_set_rate(mout_apll, freq * 1000); - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - cpu_relax(); - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU); - tmp &= (0x7 << 16); - } while (tmp != (0x1 << 16)); -} - -static void exynos5250_set_frequency(unsigned int old_index, - unsigned int new_index) -{ - if (old_index > new_index) { - set_clkdiv(new_index); - set_apll(new_index); - } else if (old_index < new_index) { - set_apll(new_index); - set_clkdiv(new_index); - } -} - -int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) -{ - struct device_node *np; - unsigned long rate; - - /* - * HACK: This is a temporary workaround to get access to clock - * controller registers directly and remove static mappings and - * dependencies on platform headers. It is necessary to enable - * Exynos multi-platform support and will be removed together with - * this whole driver as soon as Exynos gets migrated to use - * cpufreq-dt driver. - */ - np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock"); - if (!np) { - pr_err("%s: failed to find clock controller DT node\n", - __func__); - return -ENODEV; - } - - info->cmu_regs = of_iomap(np, 0); - if (!info->cmu_regs) { - pr_err("%s: failed to map CMU registers\n", __func__); - return -EFAULT; - } - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "mout_cpu"); - if (IS_ERR(moutcore)) - goto err_moutcore; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto err_mout_mpll; - - rate = clk_get_rate(mout_mpll) / 1000; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto err_mout_apll; - - info->mpll_freq_khz = rate; - /* 800Mhz */ - info->pll_safe_idx = L9; - info->cpu_clk = cpu_clk; - info->volt_table = exynos5250_volt_table; - info->freq_table = exynos5250_freq_table; - info->set_freq = exynos5250_set_frequency; - - cpufreq = info; - - return 0; - -err_mout_apll: - clk_put(mout_mpll); -err_mout_mpll: - clk_put(moutcore); -err_moutcore: - clk_put(cpu_clk); - - pr_err("%s: failed initialization\n", __func__); - return -EINVAL; -} diff --git a/drivers/reset/reset-ath79.c b/drivers/reset/reset-ath79.c index d2d290413113..9aaf646ece55 100644 --- a/drivers/reset/reset-ath79.c +++ b/drivers/reset/reset-ath79.c @@ -89,6 +89,7 @@ static int ath79_reset_probe(struct platform_device *pdev) if (IS_ERR(ath79_reset->base)) return PTR_ERR(ath79_reset->base); + spin_lock_init(&ath79_reset->lock); ath79_reset->rcdev.ops = &ath79_reset_ops; ath79_reset->rcdev.owner = THIS_MODULE; ath79_reset->rcdev.of_node = pdev->dev.of_node; diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c index 327adcf117c1..a6155c917d52 100644 --- a/drivers/soc/qcom/smd.c +++ b/drivers/soc/qcom/smd.c @@ -96,6 +96,7 @@ static const struct { * @smd: handle to qcom_smd * @of_node: of_node handle for information related to this edge * @edge_id: identifier of this edge + * @remote_pid: identifier of remote processor * @irq: interrupt for signals on this edge * @ipc_regmap: regmap handle holding the outgoing ipc register * @ipc_offset: offset within @ipc_regmap of the register for ipc @@ -111,6 +112,7 @@ struct qcom_smd_edge { struct qcom_smd *smd; struct device_node *of_node; unsigned edge_id; + unsigned remote_pid; int irq; @@ -310,7 +312,7 @@ static void qcom_smd_channel_reset(struct qcom_smd_channel *channel) SET_TX_CHANNEL_INFO(channel, fHEAD, 0); SET_TX_CHANNEL_INFO(channel, fTAIL, 0); SET_TX_CHANNEL_INFO(channel, fSTATE, 1); - SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0); + SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1); SET_TX_CHANNEL_INFO(channel, head, 0); SET_TX_CHANNEL_INFO(channel, tail, 0); @@ -572,7 +574,7 @@ static irqreturn_t qcom_smd_edge_intr(int irq, void *data) * have to scan if the amount of available space in smem have changed * since last scan. */ - available = qcom_smem_get_free_space(edge->edge_id); + available = qcom_smem_get_free_space(edge->remote_pid); if (available != edge->smem_available) { edge->smem_available = available; edge->need_rescan = true; @@ -681,7 +683,7 @@ int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len) goto out; } - SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1); + SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0); ret = wait_event_interruptible(channel->fblockread_event, qcom_smd_get_tx_avail(channel) >= tlen || @@ -689,7 +691,7 @@ int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len) if (ret) goto out; - SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0); + SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1); } SET_TX_CHANNEL_INFO(channel, fTAIL, 0); @@ -976,7 +978,8 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed spin_lock_init(&channel->recv_lock); init_waitqueue_head(&channel->fblockread_event); - ret = qcom_smem_get(edge->edge_id, smem_info_item, (void **)&info, &info_size); + ret = qcom_smem_get(edge->remote_pid, smem_info_item, (void **)&info, + &info_size); if (ret) goto free_name_and_channel; @@ -997,7 +1000,8 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed goto free_name_and_channel; } - ret = qcom_smem_get(edge->edge_id, smem_fifo_item, &fifo_base, &fifo_size); + ret = qcom_smem_get(edge->remote_pid, smem_fifo_item, &fifo_base, + &fifo_size); if (ret) goto free_name_and_channel; @@ -1041,7 +1045,7 @@ static void qcom_discover_channels(struct qcom_smd_edge *edge) int i; for (tbl = 0; tbl < SMD_ALLOC_TBL_COUNT; tbl++) { - ret = qcom_smem_get(edge->edge_id, + ret = qcom_smem_get(edge->remote_pid, smem_items[tbl].alloc_tbl_id, (void **)&alloc_tbl, NULL); @@ -1184,6 +1188,10 @@ static int qcom_smd_parse_edge(struct device *dev, return -EINVAL; } + edge->remote_pid = QCOM_SMEM_HOST_ANY; + key = "qcom,remote-pid"; + of_property_read_u32(node, key, &edge->remote_pid); + syscon_np = of_parse_phandle(node, "qcom,ipc", 0); if (!syscon_np) { dev_err(dev, "no qcom,ipc node\n"); diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c index 7c2c324c4b10..52365188a1c2 100644 --- a/drivers/soc/qcom/smem.c +++ b/drivers/soc/qcom/smem.c @@ -258,10 +258,6 @@ static int qcom_smem_alloc_private(struct qcom_smem *smem, size_t alloc_size; void *p; - /* We're not going to find it if there's no matching partition */ - if (host >= SMEM_HOST_COUNT || !smem->partitions[host]) - return -ENOENT; - phdr = smem->partitions[host]; p = (void *)phdr + sizeof(*phdr); @@ -371,8 +367,9 @@ int qcom_smem_alloc(unsigned host, unsigned item, size_t size) if (ret) return ret; - ret = qcom_smem_alloc_private(__smem, host, item, size); - if (ret == -ENOENT) + if (host < SMEM_HOST_COUNT && __smem->partitions[host]) + ret = qcom_smem_alloc_private(__smem, host, item, size); + else ret = qcom_smem_alloc_global(__smem, item, size); hwspin_unlock_irqrestore(__smem->hwlock, &flags); @@ -428,10 +425,6 @@ static int qcom_smem_get_private(struct qcom_smem *smem, struct smem_private_entry *hdr; void *p; - /* We're not going to find it if there's no matching partition */ - if (host >= SMEM_HOST_COUNT || !smem->partitions[host]) - return -ENOENT; - phdr = smem->partitions[host]; p = (void *)phdr + sizeof(*phdr); @@ -484,8 +477,9 @@ int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size) if (ret) return ret; - ret = qcom_smem_get_private(__smem, host, item, ptr, size); - if (ret == -ENOENT) + if (host < SMEM_HOST_COUNT && __smem->partitions[host]) + ret = qcom_smem_get_private(__smem, host, item, ptr, size); + else ret = qcom_smem_get_global(__smem, item, ptr, size); hwspin_unlock_irqrestore(__smem->hwlock, &flags); diff --git a/include/linux/reset.h b/include/linux/reset.h index da5602bd77d7..7f65f9cff951 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -74,6 +74,20 @@ static inline int device_reset_optional(struct device *dev) return -ENOSYS; } +static inline struct reset_control *__must_check reset_control_get( + struct device *dev, const char *id) +{ + WARN_ON(1); + return ERR_PTR(-EINVAL); +} + +static inline struct reset_control *__must_check devm_reset_control_get( + struct device *dev, const char *id) +{ + WARN_ON(1); + return ERR_PTR(-EINVAL); +} + static inline struct reset_control *reset_control_get_optional( struct device *dev, const char *id) { |