diff options
| -rw-r--r-- | drivers/mfd/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mfd/lp8788-irq.c | 198 | ||||
| -rw-r--r-- | drivers/mfd/lp8788.c | 245 | ||||
| -rw-r--r-- | include/linux/mfd/lp8788-isink.h | 52 | ||||
| -rw-r--r-- | include/linux/mfd/lp8788.h | 364 |
6 files changed, 871 insertions, 0 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b9282cafa978..84d6ea2d74f4 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -440,6 +440,16 @@ config PMIC_ADP5520 individual components like LCD backlight, LEDs, GPIOs and Kepad under the corresponding menus. +config MFD_LP8788 + bool "Texas Instruments LP8788 Power Management Unit Driver" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select IRQ_DOMAIN + help + TI LP8788 PMU supports regulators, battery charger, RTC, + ADC, backlight driver and current sinks. + config MFD_MAX77686 bool "Maxim Semiconductor MAX77686 PMIC Support" depends on I2C=y && GENERIC_HARDIRQS diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index d16bc0220e1f..083acf97af26 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -89,6 +89,8 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-core.o obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o +obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o + obj-$(CONFIG_MFD_MAX77686) += max77686.o max77686-irq.o obj-$(CONFIG_MFD_MAX77693) += max77693.o max77693-irq.o obj-$(CONFIG_MFD_MAX8907) += max8907.o diff --git a/drivers/mfd/lp8788-irq.c b/drivers/mfd/lp8788-irq.c new file mode 100644 index 000000000000..c84ded5f8ece --- /dev/null +++ b/drivers/mfd/lp8788-irq.c @@ -0,0 +1,198 @@ +/* + * TI LP8788 MFD - interrupt handler + * + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/device.h> +#include <linux/mfd/lp8788.h> +#include <linux/module.h> +#include <linux/slab.h> + +/* register address */ +#define LP8788_INT_1 0x00 +#define LP8788_INTEN_1 0x03 + +#define BASE_INTEN_ADDR LP8788_INTEN_1 +#define SIZE_REG 8 +#define NUM_REGS 3 + +/* + * struct lp8788_irq_data + * @lp : used for accessing to lp8788 registers + * @irq_lock : mutex for enabling/disabling the interrupt + * @domain : IRQ domain for handling nested interrupt + * @enabled : status of enabled interrupt + */ +struct lp8788_irq_data { + struct lp8788 *lp; + struct mutex irq_lock; + struct irq_domain *domain; + int enabled[LP8788_INT_MAX]; +}; + +static inline u8 _irq_to_addr(enum lp8788_int_id id) +{ + return id / SIZE_REG; +} + +static inline u8 _irq_to_enable_addr(enum lp8788_int_id id) +{ + return _irq_to_addr(id) + BASE_INTEN_ADDR; +} + +static inline u8 _irq_to_mask(enum lp8788_int_id id) +{ + return 1 << (id % SIZE_REG); +} + +static inline u8 _irq_to_val(enum lp8788_int_id id, int enable) +{ + return enable << (id % SIZE_REG); +} + +static void lp8788_irq_enable(struct irq_data *data) +{ + struct lp8788_irq_data *irqd = irq_data_get_irq_chip_data(data); + irqd->enabled[data->hwirq] = 1; +} + +static void lp8788_irq_disable(struct irq_data *data) +{ + struct lp8788_irq_data *irqd = irq_data_get_irq_chip_data(data); + irqd->enabled[data->hwirq] = 0; +} + +static void lp8788_irq_bus_lock(struct irq_data *data) +{ + struct lp8788_irq_data *irqd = irq_data_get_irq_chip_data(data); + + mutex_lock(&irqd->irq_lock); +} + +static void lp8788_irq_bus_sync_unlock(struct irq_data *data) +{ + struct lp8788_irq_data *irqd = irq_data_get_irq_chip_data(data); + enum lp8788_int_id irq = data->hwirq; + u8 addr, mask, val; + + addr = _irq_to_enable_addr(irq); + mask = _irq_to_mask(irq); + val = _irq_to_val(irq, irqd->enabled[irq]); + + lp8788_update_bits(irqd->lp, addr, mask, val); + + mutex_unlock(&irqd->irq_lock); +} + +static struct irq_chip lp8788_irq_chip = { + .name = "lp8788", + .irq_enable = lp8788_irq_enable, + .irq_disable = lp8788_irq_disable, + .irq_bus_lock = lp8788_irq_bus_lock, + .irq_bus_sync_unlock = lp8788_irq_bus_sync_unlock, +}; + +static irqreturn_t lp8788_irq_handler(int irq, void *ptr) +{ + struct lp8788_irq_data *irqd = ptr; + struct lp8788 *lp = irqd->lp; + u8 status[NUM_REGS], addr, mask; + bool handled; + int i; + + if (lp8788_read_multi_bytes(lp, LP8788_INT_1, status, NUM_REGS)) + return IRQ_NONE; + + for (i = 0 ; i < LP8788_INT_MAX ; i++) { + addr = _irq_to_addr(i); + mask = _irq_to_mask(i); + + /* reporting only if the irq is enabled */ + if (status[addr] & mask) { + handle_nested_irq(irq_find_mapping(irqd->domain, i)); + handled = true; + } + } + + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +static int lp8788_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hwirq) +{ + struct lp8788_irq_data *irqd = d->host_data; + struct irq_chip *chip = &lp8788_irq_chip; + + irq_set_chip_data(virq, irqd); + irq_set_chip_and_handler(virq, chip, handle_edge_irq); + irq_set_nested_thread(virq, 1); + +#ifdef CONFIG_ARM + set_irq_flags(virq, IRQF_VALID); +#else + irq_set_noprobe(virq); +#endif + + return 0; +} + +static struct irq_domain_ops lp8788_domain_ops = { + .map = lp8788_irq_map, +}; + +int lp8788_irq_init(struct lp8788 *lp, int irq) +{ + struct lp8788_irq_data *irqd; + int ret; + + if (irq <= 0) { + dev_warn(lp->dev, "invalid irq number: %d\n", irq); + return 0; + } + + irqd = devm_kzalloc(lp->dev, sizeof(*irqd), GFP_KERNEL); + if (!irqd) + return -ENOMEM; + + irqd->lp = lp; + irqd->domain = irq_domain_add_linear(lp->dev->of_node, LP8788_INT_MAX, + &lp8788_domain_ops, irqd); + if (!irqd->domain) { + dev_err(lp->dev, "failed to add irq domain err\n"); + return -EINVAL; + } + + lp->irqdm = irqd->domain; + mutex_init(&irqd->irq_lock); + + ret = request_threaded_irq(irq, NULL, lp8788_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "lp8788-irq", irqd); + if (ret) { + dev_err(lp->dev, "failed to create a thread for IRQ_N\n"); + return ret; + } + + lp->irq = irq; + + return 0; +} + +void lp8788_irq_exit(struct lp8788 *lp) +{ + if (lp->irq) + free_irq(lp->irq, lp->irqdm); +} diff --git a/drivers/mfd/lp8788.c b/drivers/mfd/lp8788.c new file mode 100644 index 000000000000..3e94a699833c --- /dev/null +++ b/drivers/mfd/lp8788.c @@ -0,0 +1,245 @@ +/* + * TI LP8788 MFD - core interface + * + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/lp8788.h> +#include <linux/module.h> +#include <linux/slab.h> + +#define MAX_LP8788_REGISTERS 0xA2 + +#define MFD_DEV_SIMPLE(_name) \ +{ \ + .name = LP8788_DEV_##_name, \ +} + +#define MFD_DEV_WITH_ID(_name, _id) \ +{ \ + .name = LP8788_DEV_##_name, \ + .id = _id, \ +} + +#define MFD_DEV_WITH_RESOURCE(_name, _resource, num_resource) \ +{ \ + .name = LP8788_DEV_##_name, \ + .resources = _resource, \ + .num_resources = num_resource, \ +} + +static struct resource chg_irqs[] = { + /* Charger Interrupts */ + { + .start = LP8788_INT_CHG_INPUT_STATE, + .end = LP8788_INT_PRECHG_TIMEOUT, + .name = LP8788_CHG_IRQ, + .flags = IORESOURCE_IRQ, + }, + /* Power Routing Switch Interrupts */ + { + .start = LP8788_INT_ENTER_SYS_SUPPORT, + .end = LP8788_INT_EXIT_SYS_SUPPORT, + .name = LP8788_PRSW_IRQ, + .flags = IORESOURCE_IRQ, + }, + /* Battery Interrupts */ + { + .start = LP8788_INT_BATT_LOW, + .end = LP8788_INT_NO_BATT, + .name = LP8788_BATT_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource rtc_irqs[] = { + { + .start = LP8788_INT_RTC_ALARM1, + .end = LP8788_INT_RTC_ALARM2, + .name = LP8788_ALM_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell lp8788_devs[] = { + /* 4 bucks */ + MFD_DEV_WITH_ID(BUCK, 1), + MFD_DEV_WITH_ID(BUCK, 2), + MFD_DEV_WITH_ID(BUCK, 3), + MFD_DEV_WITH_ID(BUCK, 4), + + /* 12 digital ldos */ + MFD_DEV_WITH_ID(DLDO, 1), + MFD_DEV_WITH_ID(DLDO, 2), + MFD_DEV_WITH_ID(DLDO, 3), + MFD_DEV_WITH_ID(DLDO, 4), + MFD_DEV_WITH_ID(DLDO, 5), + MFD_DEV_WITH_ID(DLDO, 6), + MFD_DEV_WITH_ID(DLDO, 7), + MFD_DEV_WITH_ID(DLDO, 8), + MFD_DEV_WITH_ID(DLDO, 9), + MFD_DEV_WITH_ID(DLDO, 10), + MFD_DEV_WITH_ID(DLDO, 11), + MFD_DEV_WITH_ID(DLDO, 12), + + /* 10 analog ldos */ + MFD_DEV_WITH_ID(ALDO, 1), + MFD_DEV_WITH_ID(ALDO, 2), + MFD_DEV_WITH_ID(ALDO, 3), + MFD_DEV_WITH_ID(ALDO, 4), + MFD_DEV_WITH_ID(ALDO, 5), + MFD_DEV_WITH_ID(ALDO, 6), + MFD_DEV_WITH_ID(ALDO, 7), + MFD_DEV_WITH_ID(ALDO, 8), + MFD_DEV_WITH_ID(ALDO, 9), + MFD_DEV_WITH_ID(ALDO, 10), + + /* ADC */ + MFD_DEV_SIMPLE(ADC), + + /* battery charger */ + MFD_DEV_WITH_RESOURCE(CHARGER, chg_irqs, ARRAY_SIZE(chg_irqs)), + + /* rtc */ + MFD_DEV_WITH_RESOURCE(RTC, rtc_irqs, ARRAY_SIZE(rtc_irqs)), + + /* backlight */ + MFD_DEV_SIMPLE(BACKLIGHT), + + /* current sink for vibrator */ + MFD_DEV_SIMPLE(VIBRATOR), + + /* current sink for keypad LED */ + MFD_DEV_SIMPLE(KEYLED), +}; + +int lp8788_read_byte(struct lp8788 *lp, u8 reg, u8 *data) +{ + int ret; + unsigned int val; + + ret = regmap_read(lp->regmap, reg, &val); + if (ret < 0) { + dev_err(lp->dev, "failed to read 0x%.2x\n", reg); + return ret; + } + + *data = (u8)val; + return 0; +} +EXPORT_SYMBOL_GPL(lp8788_read_byte); + +int lp8788_read_multi_bytes(struct lp8788 *lp, u8 reg, u8 *data, size_t count) +{ + return regmap_bulk_read(lp->regmap, reg, data, count); +} +EXPORT_SYMBOL_GPL(lp8788_read_multi_bytes); + +int lp8788_write_byte(struct lp8788 *lp, u8 reg, u8 data) +{ + return regmap_write(lp->regmap, reg, data); +} +EXPORT_SYMBOL_GPL(lp8788_write_byte); + +int lp8788_update_bits(struct lp8788 *lp, u8 reg, u8 mask, u8 data) +{ + return regmap_update_bits(lp->regmap, reg, mask, data); +} +EXPORT_SYMBOL_GPL(lp8788_update_bits); + +static int lp8788_platform_init(struct lp8788 *lp) +{ + struct lp8788_platform_data *pdata = lp->pdata; + + return (pdata && pdata->init_func) ? pdata->init_func(lp) : 0; +} + +static const struct regmap_config lp8788_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX_LP8788_REGISTERS, +}; + +static int lp8788_probe(struct i2c_client *cl, const struct i2c_device_id *id) +{ + struct lp8788 *lp; + struct lp8788_platform_data *pdata = cl->dev.platform_data; + int ret; + + lp = devm_kzalloc(&cl->dev, sizeof(struct lp8788), GFP_KERNEL); + if (!lp) + return -ENOMEM; + + lp->regmap = devm_regmap_init_i2c(cl, &lp8788_regmap_config); + if (IS_ERR(lp->regmap)) { + ret = PTR_ERR(lp->regmap); + dev_err(&cl->dev, "regmap init i2c err: %d\n", ret); + return ret; + } + + lp->pdata = pdata; + lp->dev = &cl->dev; + i2c_set_clientdata(cl, lp); + + ret = lp8788_platform_init(lp); + if (ret) + return ret; + + ret = lp8788_irq_init(lp, cl->irq); + if (ret) + return ret; + + return mfd_add_devices(lp->dev, -1, lp8788_devs, + ARRAY_SIZE(lp8788_devs), NULL, 0, NULL); +} + +static int __devexit lp8788_remove(struct i2c_client *cl) +{ + struct lp8788 *lp = i2c_get_clientdata(cl); + + mfd_remove_devices(lp->dev); + lp8788_irq_exit(lp); + return 0; +} + +static const struct i2c_device_id lp8788_ids[] = { + {"lp8788", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, lp8788_ids); + +static struct i2c_driver lp8788_driver = { + .driver = { + .name = "lp8788", + .owner = THIS_MODULE, + }, + .probe = lp8788_probe, + .remove = __devexit_p(lp8788_remove), + .id_table = lp8788_ids, +}; + +static int __init lp8788_init(void) +{ + return i2c_add_driver(&lp8788_driver); +} +subsys_initcall(lp8788_init); + +static void __exit lp8788_exit(void) +{ + i2c_del_driver(&lp8788_driver); +} +module_exit(lp8788_exit); + +MODULE_DESCRIPTION("TI LP8788 MFD Driver"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/lp8788-isink.h b/include/linux/mfd/lp8788-isink.h new file mode 100644 index 000000000000..f38262d21ff1 --- /dev/null +++ b/include/linux/mfd/lp8788-isink.h @@ -0,0 +1,52 @@ +/* + * TI LP8788 MFD - common definitions for current sinks + * + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ISINK_LP8788_H__ +#define __ISINK_LP8788_H__ + +/* register address */ +#define LP8788_ISINK_CTRL 0x99 +#define LP8788_ISINK12_IOUT 0x9A +#define LP8788_ISINK3_IOUT 0x9B +#define LP8788_ISINK1_PWM 0x9C +#define LP8788_ISINK2_PWM 0x9D +#define LP8788_ISINK3_PWM 0x9E + +/* mask bits */ +#define LP8788_ISINK1_IOUT_M 0x0F /* Addr 9Ah */ +#define LP8788_ISINK2_IOUT_M 0xF0 +#define LP8788_ISINK3_IOUT_M 0x0F /* Addr 9Bh */ + +/* 6 bits used for PWM code : Addr 9C ~ 9Eh */ +#define LP8788_ISINK_MAX_PWM 63 +#define LP8788_ISINK_SCALE_OFFSET 3 + +static const u8 lp8788_iout_addr[] = { + LP8788_ISINK12_IOUT, + LP8788_ISINK12_IOUT, + LP8788_ISINK3_IOUT, +}; + +static const u8 lp8788_iout_mask[] = { + LP8788_ISINK1_IOUT_M, + LP8788_ISINK2_IOUT_M, + LP8788_ISINK3_IOUT_M, +}; + +static const u8 lp8788_pwm_addr[] = { + LP8788_ISINK1_PWM, + LP8788_ISINK2_PWM, + LP8788_ISINK3_PWM, +}; + +#endif diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h new file mode 100644 index 000000000000..cec364bdccfa --- /dev/null +++ b/include/linux/mfd/lp8788.h @@ -0,0 +1,364 @@ +/* + * TI LP8788 MFD Device + * + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __MFD_LP8788_H__ +#define __MFD_LP8788_H__ + +#include <linux/gpio.h> +#include <linux/irqdomain.h> +#include <linux/regmap.h> + +#define LP8788_DEV_BUCK "lp8788-buck" +#define LP8788_DEV_DLDO "lp8788-dldo" +#define LP8788_DEV_ALDO "lp8788-aldo" +#define LP8788_DEV_CHARGER "lp8788-charger" +#define LP8788_DEV_RTC "lp8788-rtc" +#define LP8788_DEV_BACKLIGHT "lp8788-backlight" +#define LP8788_DEV_VIBRATOR "lp8788-vibrator" +#define LP8788_DEV_KEYLED "lp8788-keyled" +#define LP8788_DEV_ADC "lp8788-adc" + +#define LP8788_NUM_BUCKS 4 +#define LP8788_NUM_DLDOS 12 +#define LP8788_NUM_ALDOS 10 +#define LP8788_NUM_BUCK2_DVS 2 + +#define LP8788_CHG_IRQ "CHG_IRQ" +#define LP8788_PRSW_IRQ "PRSW_IRQ" +#define LP8788_BATT_IRQ "BATT_IRQ" +#define LP8788_ALM_IRQ "ALARM_IRQ" + +enum lp8788_int_id { + /* interrup register 1 : Addr 00h */ + LP8788_INT_TSDL, + LP8788_INT_TSDH, + LP8788_INT_UVLO, + LP8788_INT_FLAGMON, + LP8788_INT_PWRON_TIME, + LP8788_INT_PWRON, + LP8788_INT_COMP1, + LP8788_INT_COMP2, + + /* interrupt register 2 : Addr 01h */ + LP8788_INT_CHG_INPUT_STATE, + LP8788_INT_CHG_STATE, + LP8788_INT_EOC, + LP8788_INT_CHG_RESTART, + LP8788_INT_RESTART_TIMEOUT, + LP8788_INT_FULLCHG_TIMEOUT, + LP8788_INT_PRECHG_TIMEOUT, + + /* interrupt register 3 : Addr 02h */ + LP8788_INT_RTC_ALARM1 = 17, + LP8788_INT_RTC_ALARM2, + LP8788_INT_ENTER_SYS_SUPPORT, + LP8788_INT_EXIT_SYS_SUPPORT, + LP8788_INT_BATT_LOW, + LP8788_INT_NO_BATT, + + LP8788_INT_MAX = 24, +}; + +enum lp8788_dvs_sel { + DVS_SEL_V0, + DVS_SEL_V1, + DVS_SEL_V2, + DVS_SEL_V3, +}; + +enum lp8788_ext_ldo_en_id { + EN_ALDO1, + EN_ALDO234, + EN_ALDO5, + EN_ALDO7, + EN_DLDO7, + EN_DLDO911, + EN_LDOS_MAX, +}; + +enum lp8788_charger_event { + NO_CHARGER, + CHARGER_DETECTED, +}; + +enum lp8788_bl_ctrl_mode { + LP8788_BL_REGISTER_ONLY, + LP8788_BL_COMB_PWM_BASED, /* PWM + I2C, changed by PWM input */ + LP8788_BL_COMB_REGISTER_BASED, /* PWM + I2C, changed by I2C */ +}; + +enum lp8788_bl_dim_mode { + LP8788_DIM_EXPONENTIAL, + LP8788_DIM_LINEAR, +}; + +enum lp8788_bl_full_scale_current { + LP8788_FULLSCALE_5000uA, + LP8788_FULLSCALE_8500uA, + LP8788_FULLSCALE_1200uA, + LP8788_FULLSCALE_1550uA, + LP8788_FULLSCALE_1900uA, + LP8788_FULLSCALE_2250uA, + LP8788_FULLSCALE_2600uA, + LP8788_FULLSCALE_2950uA, +}; + +enum lp8788_bl_ramp_step { + LP8788_RAMP_8us, + LP8788_RAMP_1024us, + LP8788_RAMP_2048us, + LP8788_RAMP_4096us, + LP8788_RAMP_8192us, + LP8788_RAMP_16384us, + LP8788_RAMP_32768us, + LP8788_RAMP_65538us, +}; + +enum lp8788_bl_pwm_polarity { + LP8788_PWM_ACTIVE_HIGH, + LP8788_PWM_ACTIVE_LOW, +}; + +enum lp8788_isink_scale { + LP8788_ISINK_SCALE_100mA, + LP8788_ISINK_SCALE_120mA, +}; + +enum lp8788_isink_number { + LP8788_ISINK_1, + LP8788_ISINK_2, + LP8788_ISINK_3, +}; + +enum lp8788_alarm_sel { + LP8788_ALARM_1, + LP8788_ALARM_2, + LP8788_ALARM_MAX, +}; + +enum lp8788_adc_id { + LPADC_VBATT_5P5, + LPADC_VIN_CHG, + LPADC_IBATT, + LPADC_IC_TEMP, + LPADC_VBATT_6P0, + LPADC_VBATT_5P0, + LPADC_ADC1, + LPADC_ADC2, + LPADC_VDD, + LPADC_VCOIN, + LPADC_VDD_LDO, + LPADC_ADC3, + LPADC_ADC4, + LPADC_MAX, +}; + +struct lp8788; + +/* + * lp8788_buck1_dvs + * @gpio : gpio pin number for dvs control + * @vsel : dvs selector for buck v1 register + */ +struct lp8788_buck1_dvs { + int gpio; + enum lp8788_dvs_sel vsel; +}; + +/* + * lp8788_buck2_dvs + * @gpio : two gpio pin numbers are used for dvs + * @vsel : dvs selector for buck v2 register + */ +struct lp8788_buck2_dvs { + int gpio[LP8788_NUM_BUCK2_DVS]; + enum lp8788_dvs_sel vsel; +}; + +/* + * struct lp8788_ldo_enable_pin + * + * Basically, all LDOs are enabled through the I2C commands. + * But ALDO 1 ~ 5, 7, DLDO 7, 9, 11 can be enabled by external gpio pins. + * + * @gpio : gpio number which is used for enabling ldos + * @init_state : initial gpio state (ex. GPIOF_OUT_INIT_LOW) + */ +struct lp8788_ldo_enable_pin { + int gpio; + int init_state; +}; + +/* + * struct lp8788_chg_param + * @addr : charging control register address (range : 0x11 ~ 0x1C) + * @val : charging parameter value + */ +struct lp8788_chg_param { + u8 addr; + u8 val; +}; + +/* + * struct lp8788_charger_platform_data + * @vbatt_adc : adc selection id for battery voltage + * @batt_temp_adc : adc selection id for battery temperature + * @max_vbatt_mv : used for calculating battery capacity + * @chg_params : initial charging parameters + * @num_chg_params : numbers of charging parameters + * @charger_event : the charger event can be reported to the platform side + */ +struct lp8788_charger_platform_data { + enum lp8788_adc_id vbatt_adc; + enum lp8788_adc_id batt_temp_adc; + unsigned int max_vbatt_mv; + struct lp8788_chg_param *chg_params; + int num_chg_params; + void (*charger_event) (struct lp8788 *lp, + enum lp8788_charger_event event); +}; + +/* + * struct lp8788_bl_pwm_data + * @pwm_set_intensity : set duty of pwm + * @pwm_get_intensity : get current duty of pwm + */ +struct lp8788_bl_pwm_data { + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (int max_brightness); +}; + +/* + * struct lp8788_backlight_platform_data + * @name : backlight driver name. (default: "lcd-backlight") + * @initial_brightness : initial value of backlight brightness + * @bl_mode : brightness control by pwm or lp8788 register + * @dim_mode : dimming mode selection + * @full_scale : full scale current setting + * @rise_time : brightness ramp up step time + * @fall_time : brightness ramp down step time + * @pwm_pol : pwm polarity setting when bl_mode is pwm based + * @pwm_data : platform specific pwm generation functions + * only valid when bl_mode is pwm based + */ +struct lp8788_backlight_platform_data { + char *name; + int initial_brightness; + enum lp8788_bl_ctrl_mode bl_mode; + enum lp8788_bl_dim_mode dim_mode; + enum lp8788_bl_full_scale_current full_scale; + enum lp8788_bl_ramp_step rise_time; + enum lp8788_bl_ramp_step fall_time; + enum lp8788_bl_pwm_polarity pwm_pol; + struct lp8788_bl_pwm_data pwm_data; +}; + +/* + * struct lp8788_led_platform_data + * @name : led driver name. (default: "keyboard-backlight") + * @scale : current scale + * @num : current sink number + * @iout_code : current output value (Addr 9Ah ~ 9Bh) + */ +struct lp8788_led_platform_data { + char *name; + enum lp8788_isink_scale scale; + enum lp8788_isink_number num; + int iout_code; +}; + +/* + * struct lp8788_vib_platform_data + * @name : vibrator driver name + * @scale : current scale + * @num : current sink number + * @iout_code : current output value (Addr 9Ah ~ 9Bh) + * @pwm_code : PWM code value (Addr 9Ch ~ 9Eh) + */ +struct lp8788_vib_platform_data { + char *name; + enum lp8788_isink_scale scale; + enum lp8788_isink_number num; + int iout_code; + int pwm_code; +}; + +/* + * struct lp8788_platform_data + * @init_func : used for initializing registers + * before mfd driver is registered + * @buck_data : regulator initial data for buck + * @dldo_data : regulator initial data for digital ldo + * @aldo_data : regulator initial data for analog ldo + * @buck1_dvs : gpio configurations for buck1 dvs + * @buck2_dvs : gpio configurations for buck2 dvs + * @ldo_pin : gpio configurations for enabling LDOs + * @chg_pdata : platform data for charger driver + * @alarm_sel : rtc alarm selection (1 or 2) + * @bl_pdata : configurable data for backlight driver + * @led_pdata : configurable data for led driver + * @vib_pdata : configurable data for vibrator driver + * @adc_pdata : iio map data for adc driver + */ +struct lp8788_platform_data { + /* general system information */ + int (*init_func) (struct lp8788 *lp); + + /* regulators */ + struct regulator_init_data *buck_data[LP8788_NUM_BUCKS]; + struct regulator_init_data *dldo_data[LP8788_NUM_DLDOS]; + struct regulator_init_data *aldo_data[LP8788_NUM_ALDOS]; + struct lp8788_buck1_dvs *buck1_dvs; + struct lp8788_buck2_dvs *buck2_dvs; + struct lp8788_ldo_enable_pin *ldo_pin[EN_LDOS_MAX]; + + /* charger */ + struct lp8788_charger_platform_data *chg_pdata; + + /* rtc alarm */ + enum lp8788_alarm_sel alarm_sel; + + /* backlight */ + struct lp8788_backlight_platform_data *bl_pdata; + + /* current sinks */ + struct lp8788_led_platform_data *led_pdata; + struct lp8788_vib_platform_data *vib_pdata; + + /* adc iio map data */ + struct iio_map *adc_pdata; +}; + +/* + * struct lp8788 + * @dev : parent device pointer + * @regmap : used for i2c communcation on accessing registers + * @irqdm : interrupt domain for handling nested interrupt + * @irq : pin number of IRQ_N + * @pdata : lp8788 platform specific data + */ +struct lp8788 { + struct device *dev; + struct regmap *regmap; + struct irq_domain *irqdm; + int irq; + struct lp8788_platform_data *pdata; +}; + +int lp8788_irq_init(struct lp8788 *lp, int chip_irq); +void lp8788_irq_exit(struct lp8788 *lp); +int lp8788_read_byte(struct lp8788 *lp, u8 reg, u8 *data); +int lp8788_read_multi_bytes(struct lp8788 *lp, u8 reg, u8 *data, size_t count); +int lp8788_write_byte(struct lp8788 *lp, u8 reg, u8 data); +int lp8788_update_bits(struct lp8788 *lp, u8 reg, u8 mask, u8 data); +#endif |