diff options
| -rw-r--r-- | arch/powerpc/kernel/asm-offsets.c | 1 | ||||
| -rw-r--r-- | arch/powerpc/kernel/cpu_setup_ppc970.S | 99 | ||||
| -rw-r--r-- | arch/powerpc/kernel/cputable.c | 6 | ||||
| -rw-r--r-- | arch/powerpc/kernel/head_64.S | 52 | ||||
| -rw-r--r-- | arch/powerpc/platforms/cell/smp.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/smp.c | 4 | ||||
| -rw-r--r-- | include/asm-powerpc/cputable.h | 3 |
7 files changed, 71 insertions, 98 deletions
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index a2f95e467a75..c53acd2a6dfc 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -246,6 +246,7 @@ int main(void) DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value)); DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features)); DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup)); + DEFINE(CPU_SPEC_RESTORE, offsetof(struct cpu_spec, cpu_restore)); #ifndef CONFIG_PPC64 DEFINE(pbe_address, offsetof(struct pbe, address)); diff --git a/arch/powerpc/kernel/cpu_setup_ppc970.S b/arch/powerpc/kernel/cpu_setup_ppc970.S index f69af2c5d7b3..f619932794e8 100644 --- a/arch/powerpc/kernel/cpu_setup_ppc970.S +++ b/arch/powerpc/kernel/cpu_setup_ppc970.S @@ -16,27 +16,12 @@ #include <asm/asm-offsets.h> #include <asm/cache.h> -_GLOBAL(__970_cpu_preinit) - /* - * Do nothing if not running in HV mode - */ +_GLOBAL(__cpu_preinit_ppc970) + /* Do nothing if not running in HV mode */ mfmsr r0 rldicl. r0,r0,4,63 beqlr - /* - * Deal only with PPC970 and PPC970FX. - */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr -1: - /* Make sure HID4:rm_ci is off before MMU is turned off, that large * pages are enabled with HID4:61 and clear HID5:DCBZ_size and * HID5:DCBZ32_ill @@ -72,21 +57,6 @@ _GLOBAL(__970_cpu_preinit) isync blr -_GLOBAL(__setup_cpu_ppc970) - mfspr r0,SPRN_HID0 - li r11,5 /* clear DOZE and SLEEP */ - rldimi r0,r11,52,8 /* set NAP and DPM */ - mtspr SPRN_HID0,r0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - sync - isync - blr - /* Definitions for the table use to save CPU states */ #define CS_HID0 0 #define CS_HID1 8 @@ -101,33 +71,28 @@ cpu_state_storage: .balign L1_CACHE_BYTES,0 .text -/* Called in normal context to backup CPU 0 state. This - * does not include cache settings. This function is also - * called for machine sleep. This does not include the MMU - * setup, BATs, etc... but rather the "special" registers - * like HID0, HID1, HID4, etc... - */ -_GLOBAL(__save_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - LOAD_REG_IMMEDIATE(r5,cpu_state_storage) - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bne 2f - -1: /* skip if not running in HV mode */ +_GLOBAL(__setup_cpu_ppc970) + /* Do nothing if not running in HV mode */ mfmsr r0 rldicl. r0,r0,4,63 - beq 2f + beqlr + + mfspr r0,SPRN_HID0 + li r11,5 /* clear DOZE and SLEEP */ + rldimi r0,r11,52,8 /* set NAP and DPM */ + mtspr SPRN_HID0,r0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + sync + isync + + /* Save away cpu state */ + LOAD_REG_IMMEDIATE(r5,cpu_state_storage) /* Save HID0,1,4 and 5 */ mfspr r3,SPRN_HID0 @@ -139,35 +104,19 @@ _GLOBAL(__save_cpu_setup) mfspr r3,SPRN_HID5 std r3,CS_HID5(r5) -2: - mtcr r7 blr /* Called with no MMU context (typically MSR:IR/DR off) to * restore CPU state as backed up by the previous * function. This does not include cache setting */ -_GLOBAL(__restore_cpu_setup) - /* Get storage ptr (FIXME when using anton reloc as we - * are running with translation disabled here - */ - LOAD_REG_IMMEDIATE(r5,cpu_state_storage) - - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr - -1: /* skip if not running in HV mode */ +_GLOBAL(__restore_cpu_ppc970) + /* Do nothing if not running in HV mode */ mfmsr r0 rldicl. r0,r0,4,63 beqlr + LOAD_REG_IMMEDIATE(r5,cpu_state_storage) /* Before accessing memory, we make sure rm_ci is clear */ li r0,0 mfspr r3,SPRN_HID4 diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 272e43622fd6..306da4cd37a0 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -39,7 +39,10 @@ extern void __setup_cpu_7400(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_7410(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec); #endif /* CONFIG_PPC32 */ +#ifdef CONFIG_PPC64 extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_ppc970(void); +#endif /* CONFIG_PPC64 */ /* This table only contains "desktop" CPUs, it need to be filled with embedded * ones as well... @@ -184,6 +187,7 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_ppc970, + .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, .platform = "ppc970", @@ -199,6 +203,7 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_ppc970, + .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, .platform = "ppc970", @@ -214,6 +219,7 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_ppc970, + .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, .platform = "ppc970", diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 6ff3cf506088..e9963d9f335a 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -132,7 +132,7 @@ _GLOBAL(__secondary_hold) bne 100b #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) - LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init) + LOAD_REG_IMMEDIATE(r4, .generic_secondary_smp_init) mtctr r4 mr r3,r24 bctr @@ -1484,19 +1484,17 @@ fwnmi_data_area: . = 0x8000 /* - * On pSeries, secondary processors spin in the following code. + * On pSeries and most other platforms, secondary processors spin + * in the following code. * At entry, r3 = this processor's number (physical cpu id) */ -_GLOBAL(pSeries_secondary_smp_init) +_GLOBAL(generic_secondary_smp_init) mr r24,r3 /* turn on 64-bit mode */ bl .enable_64b_mode isync - /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup - /* Set up a paca value for this processor. Since we have the * physical cpu id in r24, we need to search the pacas to find * which logical id maps to our physical one. @@ -1522,15 +1520,28 @@ _GLOBAL(pSeries_secondary_smp_init) /* start. */ sync - /* Create a temp kernel stack for use before relocation is on. */ +#ifndef CONFIG_SMP + b 3b /* Never go on non-SMP */ +#else + cmpwi 0,r23,0 + beq 3b /* Loop until told to go */ + + /* See if we need to call a cpu state restore handler */ + LOAD_REG_IMMEDIATE(r23, cur_cpu_spec) + ld r23,0(r23) + ld r23,CPU_SPEC_RESTORE(r23) + cmpdi 0,r23,0 + beq 4f + ld r23,0(r23) + mtctr r23 + bctrl + +4: /* Create a temp kernel stack for use before relocation is on. */ ld r1,PACAEMERGSP(r13) subi r1,r1,STACK_FRAME_OVERHEAD - cmpwi 0,r23,0 -#ifdef CONFIG_SMP - bne .__secondary_start + b .__secondary_start #endif - b 3b /* Loop until told to go */ #ifdef CONFIG_PPC_ISERIES _STATIC(__start_initialization_iSeries) @@ -1611,7 +1622,16 @@ _GLOBAL(__start_initialization_multiplatform) bl .enable_64b_mode /* Setup some critical 970 SPRs before switching MMU off */ - bl .__970_cpu_preinit + mfspr r0,SPRN_PVR + srwi r0,r0,16 + cmpwi r0,0x39 /* 970 */ + beq 1f + cmpwi r0,0x3c /* 970FX */ + beq 1f + cmpwi r0,0x44 /* 970MP */ + bne 2f +1: bl .__cpu_preinit_ppc970 +2: /* Switch off MMU if not already */ LOAD_REG_IMMEDIATE(r4, .__after_prom_start - KERNELBASE) @@ -1782,7 +1802,7 @@ _GLOBAL(pmac_secondary_start) isync /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup + bl .__restore_cpu_ppc970 /* pSeries do that early though I don't think we really need it */ mfmsr r3 @@ -1932,12 +1952,6 @@ _STATIC(start_here_multiplatform) mr r5,r26 bl .identify_cpu - /* Save some low level config HIDs of CPU0 to be copied to - * other CPUs later on, or used for suspend/resume - */ - bl .__save_cpu_setup - sync - /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */ diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index 46aef0640742..1c0acbad7425 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -57,7 +57,7 @@ */ static cpumask_t of_spin_map; -extern void pSeries_secondary_smp_init(unsigned long); +extern void generic_secondary_smp_init(unsigned long); /** * smp_startup_cpu() - start the given cpu @@ -74,7 +74,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) { int status; unsigned long start_here = __pa((u32)*((unsigned long *) - pSeries_secondary_smp_init)); + generic_secondary_smp_init)); unsigned int pcpu; int start_cpu; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index f39dad8b99e0..c6624b8a0e77 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -62,7 +62,7 @@ */ static cpumask_t of_spin_map; -extern void pSeries_secondary_smp_init(unsigned long); +extern void generic_secondary_smp_init(unsigned long); #ifdef CONFIG_HOTPLUG_CPU @@ -270,7 +270,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) { int status; unsigned long start_here = __pa((u32)*((unsigned long *) - pSeries_secondary_smp_init)); + generic_secondary_smp_init)); unsigned int pcpu; int start_cpu; diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 1ba3c9983614..748bc1805da9 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -36,6 +36,7 @@ struct cpu_spec; typedef void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec); +typedef void (*cpu_restore_t)(void); enum powerpc_oprofile_type { PPC_OPROFILE_INVALID = 0, @@ -65,6 +66,8 @@ struct cpu_spec { * BHT, SPD, etc... from head.S before branching to identify_machine */ cpu_setup_t cpu_setup; + /* Used to restore cpu setup on secondary processors and at resume */ + cpu_restore_t cpu_restore; /* Used by oprofile userspace to select the right counters */ char *oprofile_cpu_type; |