diff options
51 files changed, 3881 insertions, 1004 deletions
diff --git a/Documentation/devicetree/bindings/crypto/omap-aes.txt b/Documentation/devicetree/bindings/crypto/omap-aes.txt new file mode 100644 index 000000000000..fd9717653cbb --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt @@ -0,0 +1,31 @@ +OMAP SoC AES crypto Module + +Required properties: + +- compatible : Should contain entries for this and backward compatible + AES versions: + - "ti,omap2-aes" for OMAP2. + - "ti,omap3-aes" for OMAP3. + - "ti,omap4-aes" for OMAP4 and AM33XX. + Note that the OMAP2 and 3 versions are compatible (OMAP3 supports + more algorithms) but they are incompatible with OMAP4. +- ti,hwmods: Name of the hwmod associated with the AES module +- reg : Offset and length of the register set for the module +- interrupts : the interrupt-specifier for the AES module. + +Optional properties: +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names should include "tx" and "rx" if present. + +Example: + /* AM335x */ + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53500000 0xa0>; + interrupts = <102>; + dmas = <&edma 6>, + <&edma 5>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt new file mode 100644 index 000000000000..f839acd6f0ee --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt @@ -0,0 +1,28 @@ +OMAP SoC SHA crypto Module + +Required properties: + +- compatible : Should contain entries for this and backward compatible + SHAM versions: + - "ti,omap2-sham" for OMAP2 & OMAP3. + - "ti,omap4-sham" for OMAP4 and AM33XX. + Note that these two versions are incompatible. +- ti,hwmods: Name of the hwmod associated with the SHAM module +- reg : Offset and length of the register set for the module +- interrupts : the interrupt-specifier for the SHAM module. + +Optional properties: +- dmas: DMA specifiers for the rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request name. Should be "rx" if a dma is present. + +Example: + /* AM335x */ + sham: sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index ed271fc255b2..8c8908ab84ba 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -20,8 +20,29 @@ ti,dual-volt: boolean, supports dual voltage cards ti,non-removable: non-removable slot (like eMMC) ti,needs-special-reset: Requires a special softreset sequence ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed +dmas: List of DMA specifiers with the controller specific format +as described in the generic DMA client binding. A tx and rx +specifier is required. +dma-names: List of DMA request names. These strings correspond +1:1 with the DMA specifiers listed in dmas. The string naming is +to be "rx" and "tx" for RX and TX DMA requests, respectively. + +Examples: + +[hwmod populated DMA resources] + + mmc1: mmc@0x4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + ti,dual-volt; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + ti,non-removable; + }; + +[generic DMA request binding] -Example: mmc1: mmc@0x4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; @@ -30,4 +51,7 @@ Example: bus-width = <4>; vmmc-supply = <&vmmc>; /* phandle to regulator node */ ti,non-removable; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index 5a02e30dd262..7069a0b84e3a 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -72,6 +72,13 @@ Optional properties: /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>; +- interrupt-controller : standard interrupt controller binding if using + interrupts for wake-up events for example. In this case pinctrl-single + is set up as a chained interrupt controller and the wake-up interrupts + can be requested by the drivers using request_irq(). + +- #interrupt-cells : standard interrupt binding if using interrupts + This driver assumes that there is only one register for each pin (unless the pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as specified in the pinctrl-bindings.txt document in this directory. @@ -121,6 +128,8 @@ pmx_core: pinmux@4a100040 { reg = <0x4a100040 0x0196>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xffff>; }; @@ -131,6 +140,8 @@ pmx_wkup: pinmux@4a31e040 { reg = <0x4a31e040 0x0038>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xffff>; }; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 802720e3e8fd..9df7d2c15e7d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -172,7 +172,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ + omap3-n900.dtb \ omap3-tobi.dtb \ + omap3-gta04.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ omap4-panda.dtb \ @@ -186,9 +188,11 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evmsk.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-base0033.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ - am43x-epos-evm.dtb + am43x-epos-evm.dtb \ + dra7-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts new file mode 100644 index 000000000000..b4f95c2bbf74 --- /dev/null +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -0,0 +1,16 @@ +/* + * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION + * + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am335x-igep0033.dtsi" + +/ { + model = "IGEP COM AM335x on AQUILA Expansion"; + compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 2f66deda9f5c..e3f27ec31718 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -21,177 +21,205 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - am33xx_pinmux: pinmux@44e10800 { + leds { pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - - user_leds_s0: user_leds_s0 { - pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ - >; - }; + pinctrl-0 = <&user_leds_s0>; - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; + compatible = "gpio-leds"; - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; }; - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; }; - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ - >; + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; }; - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; }; + }; - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; }; - ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; - status = "okay"; - }; + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; - musb: usb@47400000 { - status = "okay"; + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; - control@44e10000 { - status = "okay"; - }; + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; - usb-phy@47401300 { - status = "okay"; - }; + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; - usb-phy@47401b00 { - status = "okay"; - }; + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; - usb@47401000 { - status = "okay"; - }; + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + >; + }; - dma-controller@07402000 { - status = "okay"; - }; - }; + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; - i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; - status = "okay"; - clock-frequency = <400000>; + status = "okay"; +}; - tps: tps@24 { - reg = <0x24>; - }; +&usb { + status = "okay"; - }; + control@44e10000 { + status = "okay"; }; - leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0>; + usb-phy@47401300 { + status = "okay"; + }; - compatible = "gpio-leds"; + usb-phy@47401b00 { + status = "okay"; + }; - led@2 { - label = "beaglebone:green:heartbeat"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; + usb@47401000 { + status = "okay"; + }; - led@3 { - label = "beaglebone:green:mmc0"; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; - led@4 { - label = "beaglebone:green:usr2"; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; + dma-controller@07402000 { + status = "okay"; + }; +}; - led@5 { - label = "beaglebone:green:usr3"; - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; }; + }; /include/ "tps65217.dtsi" @@ -260,3 +288,12 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; }; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 7993c489982c..94ee427a6db1 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -9,3 +9,21 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 197cadf72d2c..6b71ad95a5cf 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -15,3 +15,64 @@ regulator-max-microvolt = <1800000>; regulator-always-on; }; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; + ti,vcc-aux-disable-is-sleep; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +/ { + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index e8ec8756e498..eabacf9b8c31 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -24,324 +24,6 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - am33xx_pinmux: pinmux@44e10800 { - pinctrl-names = "default"; - pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>; - - matrix_keypad_s0: matrix_keypad_s0 { - pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ - >; - }; - - volume_keys_s0: volume_keys_s0 { - pinctrl-single,pins = < - 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ - 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ - >; - }; - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ - 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - - nandflash_pins_s0: nandflash_pins_s0 { - pinctrl-single,pins = < - 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ - >; - }; - - ecap0_pins: backlight_pins { - pinctrl-single,pins = < - 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - >; - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - }; - - ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - - status = "okay"; - }; - - i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - status = "okay"; - clock-frequency = <400000>; - - tps: tps@2d { - reg = <0x2d>; - }; - }; - - musb: usb@47400000 { - status = "okay"; - - control@44e10000 { - status = "okay"; - }; - - usb-phy@47401300 { - status = "okay"; - }; - - usb-phy@47401b00 { - status = "okay"; - }; - - usb@47401000 { - status = "okay"; - }; - - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; - - dma-controller@07402000 { - status = "okay"; - }; - }; - - i2c1: i2c@4802a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - status = "okay"; - clock-frequency = <100000>; - - lis331dlh: lis331dlh@18 { - compatible = "st,lis331dlh", "st,lis3lv02d"; - reg = <0x18>; - Vdd-supply = <&lis3_reg>; - Vdd_IO-supply = <&lis3_reg>; - - st,click-single-x; - st,click-single-y; - st,click-single-z; - st,click-thresh-x = <10>; - st,click-thresh-y = <10>; - st,click-thresh-z = <10>; - st,irq1-click; - st,irq2-click; - st,wakeup-x-lo; - st,wakeup-x-hi; - st,wakeup-y-lo; - st,wakeup-y-hi; - st,wakeup-z-lo; - st,wakeup-z-hi; - st,min-limit-x = <120>; - st,min-limit-y = <120>; - st,min-limit-z = <140>; - st,max-limit-x = <550>; - st,max-limit-y = <550>; - st,max-limit-z = <750>; - }; - - tsl2550: tsl2550@39 { - compatible = "taos,tsl2550"; - reg = <0x39>; - }; - - tmp275: tmp275@48 { - compatible = "ti,tmp275"; - reg = <0x48>; - }; - }; - - elm: elm@48080000 { - status = "okay"; - }; - - epwmss0: epwmss@48300000 { - status = "okay"; - - ecap0: ecap@48300100 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap0_pins>; - }; - }; - - gpmc: gpmc@50000000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nandflash_pins_s0>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ - nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ - nand-bus-width = <8>; - ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; - gpmc,device-width = <1>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - elm_id = <&elm>; - - /* MTD partition table */ - partition@0 { - label = "SPL1"; - reg = <0x00000000 0x000020000>; - }; - - partition@1 { - label = "SPL2"; - reg = <0x00020000 0x00020000>; - }; - - partition@2 { - label = "SPL3"; - reg = <0x00040000 0x00020000>; - }; - - partition@3 { - label = "SPL4"; - reg = <0x00060000 0x00020000>; - }; - - partition@4 { - label = "U-boot"; - reg = <0x00080000 0x001e0000>; - }; - - partition@5 { - label = "environment"; - reg = <0x00260000 0x00020000>; - }; - - partition@6 { - label = "Kernel"; - reg = <0x00280000 0x00500000>; - }; - - partition@7 { - label = "File-System"; - reg = <0x00780000 0x0F880000>; - }; - }; - }; - }; - vbat: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -403,6 +85,393 @@ brightness-levels = <0 51 53 56 62 75 101 152 255>; default-brightness-level = <8>; }; + + panel { + compatible = "ti,tilcdc,panel"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins_s0>; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + 800x480p62 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <39>; + hback-porch = <39>; + hsync-len = <47>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + >; + }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ + 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + nandflash_pins_s0: nandflash_pins_s0 { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + lcd_pins_s0: lcd_pins_s0 { + pinctrl-single,pins = < + 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ + 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ + 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ + 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ + 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ + 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ + 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ + 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ + 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ + 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ + 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ + 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ + 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ + 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ + 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ + 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ + 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ + 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ + 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ + 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ + 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ + 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ + 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ + 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <100000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; +}; + +&lcdc { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +&epwmss0 { + status = "okay"; + + ecap0: ecap@48300100 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; + }; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins_s0>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + + /* MTD partition table */ + partition@0 { + label = "SPL1"; + reg = <0x00000000 0x000020000>; + }; + + partition@1 { + label = "SPL2"; + reg = <0x00020000 0x00020000>; + }; + + partition@2 { + label = "SPL3"; + reg = <0x00040000 0x00020000>; + }; + + partition@3 { + label = "SPL4"; + reg = <0x00060000 0x00020000>; + }; + + partition@4 { + label = "U-boot"; + reg = <0x00080000 0x001e0000>; + }; + + partition@5 { + label = "environment"; + reg = <0x00260000 0x00020000>; + }; + + partition@6 { + label = "Kernel"; + reg = <0x00280000 0x00500000>; + }; + + partition@7 { + label = "File-System"; + reg = <0x00780000 0x0F880000>; + }; + }; }; #include "tps65910.dtsi" @@ -477,6 +546,8 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; @@ -517,3 +588,17 @@ ti,adc-channels = <4 5 6 7>; }; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 4f339fa91c57..5f12b28dd593 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -31,210 +31,6 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - am33xx_pinmux: pinmux@44e10800 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; - - user_leds_s0: user_leds_s0 { - pinctrl-single,pins = < - 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ - 0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ - 0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ - 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ - >; - }; - - gpio_keys_s0: gpio_keys_s0 { - pinctrl-single,pins = < - 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ - 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ - 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ - 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ - >; - }; - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - - ecap2_pins: backlight_pins { - pinctrl-single,pins = < - 0x19c 0x4 /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - - /* Slave 2 */ - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ - >; - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - - /* Slave 2 reset value*/ - 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - }; - - ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - - status = "okay"; - }; - - i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - status = "okay"; - clock-frequency = <400000>; - - tps: tps@2d { - reg = <0x2d>; - }; - - lis331dlh: lis331dlh@18 { - compatible = "st,lis331dlh", "st,lis3lv02d"; - reg = <0x18>; - Vdd-supply = <&lis3_reg>; - Vdd_IO-supply = <&lis3_reg>; - - st,click-single-x; - st,click-single-y; - st,click-single-z; - st,click-thresh-x = <10>; - st,click-thresh-y = <10>; - st,click-thresh-z = <10>; - st,irq1-click; - st,irq2-click; - st,wakeup-x-lo; - st,wakeup-x-hi; - st,wakeup-y-lo; - st,wakeup-y-hi; - st,wakeup-z-lo; - st,wakeup-z-hi; - st,min-limit-x = <120>; - st,min-limit-y = <120>; - st,min-limit-z = <140>; - st,max-limit-x = <550>; - st,max-limit-y = <550>; - st,max-limit-z = <750>; - }; - }; - - musb: usb@47400000 { - status = "okay"; - - control@44e10000 { - status = "okay"; - }; - - usb-phy@47401300 { - status = "okay"; - }; - - usb@47401000 { - status = "okay"; - }; - }; - - epwmss2: epwmss@48304000 { - status = "okay"; - - ecap2: ecap@48304100 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap2_pins>; - }; - }; - }; - vbat: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -321,6 +117,208 @@ }; }; +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ + 0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ + 0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ + >; + }; + + gpio_keys_s0: gpio_keys_s0 { + pinctrl-single,pins = < + 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + ecap2_pins: backlight_pins { + pinctrl-single,pins = < + 0x19c 0x4 /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + + /* Slave 2 */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value*/ + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; +}; + +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; +}; + +&epwmss2 { + status = "okay"; + + ecap2: ecap@48304100 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>; + }; +}; + #include "tps65910.dtsi" &tps { @@ -393,6 +391,8 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; @@ -419,3 +419,17 @@ phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii-txid"; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi new file mode 100644 index 000000000000..06eba076bfcd --- /dev/null +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -0,0 +1,265 @@ +/* + * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x + * + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "com:green:user"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&am33xx_pinmux { + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + nandflash_pins: pinmux_nandflash_pins { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + >; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + + /* MTD partition table */ + partition@0 { + label = "SPL"; + reg = <0x00000000 0x000080000>; + }; + + partition@1 { + label = "U-boot"; + reg = <0x00080000 0x001e0000>; + }; + + partition@2 { + label = "U-Boot Env"; + reg = <0x00260000 0x00020000>; + }; + + partition@3 { + label = "Kernel"; + reg = <0x00280000 0x00500000>; + }; + + partition@4 { + label = "File System"; + reg = <0x00780000 0x007880000>; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; +}; + diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index f9c5da9c7fe1..7db3c81d1563 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -30,6 +30,8 @@ usb1 = &usb1; phy0 = &usb0_phy; phy1 = &usb1_phy; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; }; cpus { @@ -57,6 +59,11 @@ }; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -100,13 +107,25 @@ reg = <0x48200000 0x1000>; }; + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x10>; + interrupts = <12 13 14>; + #dma-cells = <1>; + dma-channels = <64>; + ti,edma-regions = <4>; + ti,edma-slots = <256>; + }; + gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x44e07000 0x1000>; interrupts = <96>; }; @@ -117,7 +136,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x4804c000 0x1000>; interrupts = <98>; }; @@ -128,7 +147,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ac000 0x1000>; interrupts = <32>; }; @@ -139,7 +158,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ae000 0x1000>; interrupts = <62>; }; @@ -228,6 +247,44 @@ status = "disabled"; }; + mmc1: mmc@48060000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + interrupts = <64>; + interrupt-parent = <&intc>; + reg = <0x48060000 0x1000>; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + interrupts = <28>; + interrupt-parent = <&intc>; + reg = <0x481d8000 0x1000>; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + interrupts = <29>; + interrupt-parent = <&intc>; + reg = <0x47810000 0x1000>; + status = "disabled"; + }; + wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; @@ -323,6 +380,11 @@ interrupts = <65>; ti,spi-num-cs = <2>; ti,hwmods = "spi0"; + dmas = <&edma 16 + &edma 17 + &edma 18 + &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -334,6 +396,11 @@ interrupts = <125>; ti,spi-num-cs = <2>; ti,hwmods = "spi1"; + dmas = <&edma 42 + &edma 43 + &edma 44 + &edma 45>; + dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -617,6 +684,15 @@ status = "disabled"; }; + lcdc: lcdc@4830e000 { + compatible = "ti,am33xx-tilcdc"; + reg = <0x4830e000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <36>; + ti,hwmods = "lcdc"; + status = "disabled"; + }; + tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; reg = <0x44e0d000 0x1000>; @@ -645,5 +721,24 @@ #size-cells = <1>; status = "disabled"; }; + + sham: sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; + + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53500000 0xa0>; + interrupts = <103>; + dmas = <&edma 6>, + <&edma 5>; + dma-names = "tx", "rx"; + }; }; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index ddc1df77ac52..a403172430bc 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -22,8 +22,12 @@ }; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; }; }; @@ -45,6 +49,47 @@ compatible = "ti,am4372-uart","ti,omap2-uart"; reg = <0x44e09000 0x2000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart1"; + }; + + uart1: serial@48022000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x48022000 0x2000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart2"; + status = "disabled"; + }; + + uart2: serial@48024000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x48024000 0x2000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart3"; + status = "disabled"; + }; + + uart3: serial@481a6000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x481a6000 0x2000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart4"; + status = "disabled"; + }; + + uart4: serial@481a8000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x481a8000 0x2000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart5"; + status = "disabled"; + }; + + uart5: serial@481aa000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x481aa000 0x2000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart6"; + status = "disabled"; }; timer1: timer@44e31000 { @@ -52,17 +97,333 @@ reg = <0x44e31000 0x400>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,timer-alwon; + ti,hwmods = "timer1"; }; timer2: timer@48040000 { compatible = "ti,am4372-timer","ti,am335x-timer"; reg = <0x48040000 0x400>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48042000 0x400>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer3"; + status = "disabled"; + }; + + timer4: timer@48044000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48044000 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,hwmods = "timer4"; + status = "disabled"; + }; + + timer5: timer@48046000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48046000 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,hwmods = "timer5"; + status = "disabled"; + }; + + timer6: timer@48048000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48048000 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,hwmods = "timer6"; + status = "disabled"; + }; + + timer7: timer@4804a000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x4804a000 0x400>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,hwmods = "timer7"; + status = "disabled"; + }; + + timer8: timer@481c1000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x481c1000 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer8"; + status = "disabled"; + }; + + timer9: timer@4833d000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x4833d000 0x400>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer9"; + status = "disabled"; + }; + + timer10: timer@4833f000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x4833f000 0x400>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer10"; + status = "disabled"; + }; + + timer11: timer@48341000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48341000 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer11"; + status = "disabled"; }; counter32k: counter@44e86000 { compatible = "ti,am4372-counter32k","ti,omap-counter32k"; reg = <0x44e86000 0x40>; + ti,hwmods = "counter_32k"; + }; + + rtc@44e3e000 { + compatible = "ti,am4372-rtc","ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "rtc"; + status = "disabled"; + }; + + wdt@44e35000 { + compatible = "ti,am4372-wdt","ti,omap3-wdt"; + reg = <0x44e35000 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "wd_timer2"; + status = "disabled"; + }; + + gpio0: gpio@44e07000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x44e07000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio1"; + status = "disabled"; + }; + + gpio1: gpio@4804c000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x4804c000 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio2"; + status = "disabled"; + }; + + gpio2: gpio@481ac000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x481ac000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio3"; + status = "disabled"; + }; + + gpio3: gpio@481ae000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x481ae000 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio4"; + status = "disabled"; + }; + + gpio4: gpio@48320000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x48320000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio5"; + status = "disabled"; + }; + + gpio5: gpio@48322000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x48322000 0x1000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio6"; + status = "disabled"; + }; + + i2c0: i2c@44e0b000 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x44e0b000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "i2c1"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@4802a000 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x4802a000 0x1000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "i2c2"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4819c000 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x4819c000 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "i2c3"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@48030000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x48030000 0x400>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi0"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x481a0000 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi1"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@481a2000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x481a2000 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi2"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@481a4000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x481a4000 0x400>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi3"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@48345000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x48345000 0x400>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi4"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mac: ethernet@4a100000 { + compatible = "ti,am4372-cpsw","ti,cpsw"; + reg = <0x4a100000 0x800 + 0x4a101200 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "cpgmac0"; + status = "disabled"; + }; + + epwmss0: epwmss@48300000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; + status = "disabled"; + }; + + epwmss1: epwmss@48302000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48302000 0x10>; + ti,hwmods = "epwmss1"; + status = "disabled"; + }; + + epwmss2: epwmss@48304000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48304000 0x10>; + ti,hwmods = "epwmss2"; + status = "disabled"; + }; + + epwmss3: epwmss@48306000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48306000 0x10>; + ti,hwmods = "epwmss3"; + status = "disabled"; + }; + + epwmss4: epwmss@48308000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48308000 0x10>; + ti,hwmods = "epwmss4"; + status = "disabled"; + }; + + epwmss5: epwmss@4830a000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x4830a000 0x10>; + ti,hwmods = "epwmss5"; + status = "disabled"; + }; + + aes: aes@53501000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53501000 0xa0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + }; + + des: des@53701000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x53701000 0xa0>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts new file mode 100644 index 000000000000..3abf5f41e5cc --- /dev/null +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -0,0 +1,271 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra7.dtsi" + +/ { + model = "TI DRA7"; + compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x60000000>; /* 1536 MB */ + }; + + mmc2_3v3: fixedregulator-mmc2 { + compatible = "regulator-fixed"; + regulator-name = "mmc2_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + 0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */ + 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */ + 0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */ + 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ + 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */ + 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */ + 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */ + 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ + 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ + 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ + 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ + 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ + 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */ + 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */ + 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ + 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + regulators { + smps123_reg: smps123 { + /* VDD_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_DSPEVE */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_GPU - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <12500000>; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* CORE_VDD */ + regulator-name = "smps7"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_IVAHD */ + regulator-name = "smps8"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDS1V8 */ + regulator-name = "smps9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* VDD_RTCIO */ + /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; +}; + +&i2c3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <3400000>; +}; + +&mcspi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; +}; + +&mcspi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&mmc2_3v3>; + bus-width = <8>; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi new file mode 100644 index 000000000000..c01ef769761f --- /dev/null +++ b/arch/arm/boot/dts/dra7.dtsi @@ -0,0 +1,575 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/dra.h> + +#include "skeleton.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "ti,dra7xx"; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>, + <0x48214000 0x2000>, + <0x48216000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the SOC interconnect. + * The real OMAP interconnect network is quite complex. + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,omap4-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2"; + reg = <0x44000000 0x2000>, + <0x44800000 0x3000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + counter32k: counter@4ae04000 { + compatible = "ti,omap-counter32k"; + reg = <0x4ae04000 0x40>; + ti,hwmods = "counter_32k"; + }; + + dra7_pmx_core: pinmux@4a003400 { + compatible = "pinctrl-single"; + reg = <0x4a003400 0x0464>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x3fffffff>; + }; + + sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; + }; + + gpio1: gpio@4ae10000 { + compatible = "ti,omap4-gpio"; + reg = <0x4ae10000 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@48055000 { + compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@48057000 { + compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@48059000 { + compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@4805b000 { + compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@4805d000 { + compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio7: gpio@48051000 { + compatible = "ti,omap4-gpio"; + reg = <0x48051000 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio7"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio8: gpio@48053000 { + compatible = "ti,omap4-gpio"; + reg = <0x48053000 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio8"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@4806a000 { + compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart2: serial@4806c000 { + compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart3: serial@48020000 { + compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart4: serial@4806e000 { + compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart5: serial@48066000 { + compatible = "ti,omap4-uart"; + reg = <0x48066000 0x100>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart6: serial@48068000 { + compatible = "ti,omap4-uart"; + reg = <0x48068000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart7: serial@48420000 { + compatible = "ti,omap4-uart"; + reg = <0x48420000 0x100>; + ti,hwmods = "uart7"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart8: serial@48422000 { + compatible = "ti,omap4-uart"; + reg = <0x48422000 0x100>; + ti,hwmods = "uart8"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart9: serial@48424000 { + compatible = "ti,omap4-uart"; + reg = <0x48424000 0x100>; + ti,hwmods = "uart9"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart10: serial@4ae2b000 { + compatible = "ti,omap4-uart"; + reg = <0x4ae2b000 0x100>; + ti,hwmods = "uart10"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + timer1: timer@4ae18000 { + compatible = "ti,omap5430-timer"; + reg = <0x4ae18000 0x80>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap5430-timer"; + reg = <0x48032000 0x80>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap5430-timer"; + reg = <0x48034000 0x80>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap5430-timer"; + reg = <0x48036000 0x80>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer4"; + }; + + timer5: timer@48820000 { + compatible = "ti,omap5430-timer"; + reg = <0x48820000 0x80>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@48822000 { + compatible = "ti,omap5430-timer"; + reg = <0x48822000 0x80>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer6"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer7: timer@48824000 { + compatible = "ti,omap5430-timer"; + reg = <0x48824000 0x80>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@48826000 { + compatible = "ti,omap5430-timer"; + reg = <0x48826000 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer8"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap5430-timer"; + reg = <0x4803e000 0x80>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer9"; + }; + + timer10: timer@48086000 { + compatible = "ti,omap5430-timer"; + reg = <0x48086000 0x80>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer10"; + }; + + timer11: timer@48088000 { + compatible = "ti,omap5430-timer"; + reg = <0x48088000 0x80>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer13: timer@48828000 { + compatible = "ti,omap5430-timer"; + reg = <0x48828000 0x80>; + ti,hwmods = "timer13"; + status = "disabled"; + }; + + timer14: timer@4882a000 { + compatible = "ti,omap5430-timer"; + reg = <0x4882a000 0x80>; + ti,hwmods = "timer14"; + status = "disabled"; + }; + + timer15: timer@4882c000 { + compatible = "ti,omap5430-timer"; + reg = <0x4882c000 0x80>; + ti,hwmods = "timer15"; + status = "disabled"; + }; + + timer16: timer@4882e000 { + compatible = "ti,omap5430-timer"; + reg = <0x4882e000 0x80>; + ti,hwmods = "timer16"; + status = "disabled"; + }; + + wdt2: wdt@4ae14000 { + compatible = "ti,omap4-wdt"; + reg = <0x4ae14000 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "wd_timer2"; + }; + + i2c1: i2c@48070000 { + compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + status = "disabled"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + status = "disabled"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + status = "disabled"; + }; + + i2c4: i2c@4807a000 { + compatible = "ti,omap4-i2c"; + reg = <0x4807a000 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; + status = "disabled"; + }; + + i2c5: i2c@4807c000 { + compatible = "ti,omap4-i2c"; + reg = <0x4807c000 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c5"; + status = "disabled"; + }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc4: mmc@480d1000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc4"; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mcspi1: spi@48098000 { + compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + status = "disabled"; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 224c08f472f4..34cdecb4fdda 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -50,15 +50,15 @@ label = "bootloader"; reg = <0 0x20000>; }; - partition@0x20000 { + partition@20000 { label = "params"; reg = <0x20000 0x20000>; }; - partition@0x40000 { + partition@40000 { label = "kernel"; reg = <0x40000 0x200000>; }; - partition@0x240000 { + partition@240000 { label = "file-system"; reg = <0x240000 0x3dc0000>; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 2816bf612672..2e88095ea67b 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -69,6 +69,23 @@ }; }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ + vcc-supply = <&hsusb2_power>; + }; }; &omap3_pmx_wkup { @@ -79,6 +96,37 @@ }; }; +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + >; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + >; + }; + + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; +}; + &i2c1 { clock-frequency = <2600000>; @@ -148,15 +196,6 @@ power = <50>; }; -&omap3_pmx_core { - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ - >; - }; -}; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; @@ -166,3 +205,11 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio1_pins>; }; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index dfd83103657a..7669c16259a5 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -44,17 +44,6 @@ }; }; - /* HS USB Port 2 RESET */ - hsusb2_reset: hsusb2_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb2_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 19 0>; /* gpio_147 */ - startup-delay-us = <70000>; - enable-active-high; - }; - /* HS USB Port 2 Power */ hsusb2_power: hsusb2_power_reg { compatible = "regulator-fixed"; @@ -68,7 +57,7 @@ /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb2_reset>; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; }; @@ -101,18 +90,18 @@ hsusbb2_pins: pinmux_hsusbb2_pins { pinctrl-single,pins = < - 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */ - 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */ - 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */ - 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */ - 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */ - 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */ - 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */ - 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */ - 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */ - 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */ - 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */ - 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */ + 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ >; }; @@ -180,3 +169,10 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio1_pins>; }; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 7ef282795dd4..4665421bb7bc 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -125,7 +125,7 @@ nand-bus-width = <16>; gpmc,device-nand; - gpmc,sync-clki-ps = <0>; + gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; gpmc,cs-wr-off-ns = <44>; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts new file mode 100644 index 000000000000..a84684a95891 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2013 Marek Belisko <marek@goldelico.com> + * + * Based on omap3-beagle-xm.dts + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" + +/ { + model = "OMAP3 GTA04"; + compatible = "ti,omap3-gta04", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + aux-button { + label = "aux"; + linux,code = <169>; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; +}; + +&omap3_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + clock-frequency = <400000>; + + /* pressure sensor */ + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + }; + + /* leds */ + tca6507@45 { + compatible = "ti,tca6507"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x45>; + + gta04_led0: red_aux@0 { + label = "gta04:red:aux"; + reg = <0x0>; + }; + + gta04_led1: green_aux@1 { + label = "gta04:green:aux"; + reg = <0x1>; + }; + + gta04_led3: red_power@3 { + label = "gta04:red:power"; + reg = <0x3>; + linux,default-trigger = "default-on"; + }; + + gta04_led4: green_power@4 { + label = "gta04:green:power"; + reg = <0x4>; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <4>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 2326d11462a5..ba1e58b7b7e3 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -77,6 +77,8 @@ 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; }; + + leds_pins: pinmux_leds_pins { }; }; &i2c1 { @@ -141,3 +143,12 @@ &twl_gpio { ti,use-leds; }; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index e8c48284587c..750ce84fc195 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -16,7 +16,10 @@ compatible = "isee,omap3-igep0020", "ti,omap3"; leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; compatible = "gpio-leds"; + boot { label = "omap3:green:boot"; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; @@ -52,6 +55,55 @@ regulator-name = "vdd33a"; regulator-always-on; }; + + /* HS USB Port 1 Power */ + hsusb1_power: hsusb1_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ + vcc-supply = <&hsusb1_power>; + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_pins + >; + + hsusbb1_pins: pinmux_hsusbb1_pins { + pinctrl-single,pins = < + 0x5aa (PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ + 0x5a8 (PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ + 0x5bc (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */ + 0x5be (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */ + 0x5ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */ + 0x5ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */ + 0x5b0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */ + 0x5b2 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */ + 0x5b4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */ + 0x5b6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */ + 0x5b8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */ + 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ + >; + }; +}; + +&leds_pins { + pinctrl-single,pins = < + 0x5c4 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */ + 0x5c6 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */ + 0x5c8 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ + >; }; &i2c3 { @@ -99,19 +151,19 @@ label = "SPL"; reg = <0 0x100000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x100000 0x180000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x280000 0x100000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x380000 0x300000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x680000 0x1f980000>; }; @@ -147,7 +199,7 @@ gpmc,cycle2cycle-diffcsen; interrupt-parent = <&gpio6>; - interrupts = <16 8>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; vmmc-supply = <&vddvario>; vmmc_aux-supply = <&vdd33a>; reg-io-width = <4>; @@ -155,3 +207,11 @@ smsc,save-mac-address; }; }; + +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 644d05383836..525e6d9b0978 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -16,7 +16,10 @@ compatible = "isee,omap3-igep0030", "ti,omap3"; leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; compatible = "gpio-leds"; + boot { label = "omap3:green:boot"; gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; @@ -43,6 +46,12 @@ }; }; +&leds_pins { + pinctrl-single,pins = < + 0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ + >; +}; + &gpmc { ranges = <0 0 0x00000000 0x20000000>; @@ -74,19 +83,19 @@ label = "SPL"; reg = <0 0x100000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x100000 0x180000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x280000 0x100000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x380000 0x300000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x680000 0x1f980000>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts new file mode 100644 index 000000000000..d64fa04e83f6 --- /dev/null +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> + * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 (or later) as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap34xx.dtsi" + +/ { + model = "Nokia N900"; + compatible = "nokia,omap3-n900", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + +}; + +&i2c1 { + clock-frequency = <2200000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" + +&twl_gpio { + ti,pullups = <0x0>; + ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&mmc1 { + status = "disabled"; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mcspi1 { + /* + * For some reason, touchscreen is necessary for screen to work at + * all on real hw. It works well without it on emulator. + * + * Also... order in the device tree actually matters here. + */ + tsc2005@0 { + compatible = "tsc2005"; + spi-max-frequency = <6000000>; + reg = <0>; + }; + mipid@2 { + compatible = "acx565akm"; + spi-max-frequency = <6000000>; + reg = <2>; + }; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <2>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index b41bd57f4328..f275beea67b6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -107,15 +107,19 @@ reg = <0x48002030 0x05cc>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; - omap3_pmx_wkup: pinmux@0x48002a00 { + omap3_pmx_wkup: pinmux@48002a00 { compatible = "ti,omap3-padconf", "pinctrl-single"; reg = <0x48002a00 0x5c>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index e2249bcc3e63..281914ed0151 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -84,15 +84,15 @@ label = "bootloader-nor"; reg = <0 0x40000>; }; - partition@0x40000 { + partition@40000 { label = "params-nor"; reg = <0x40000 0x40000>; }; - partition@0x80000 { + partition@80000 { label = "kernel-nor"; reg = <0x80000 0x200000>; }; - partition@0x280000 { + partition@280000 { label = "filesystem-nor"; reg = <0x240000 0x7d80000>; }; @@ -125,19 +125,19 @@ label = "xloader-nand"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "bootloader-nand"; reg = <0x80000 0x140000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "params-nand"; reg = <0x1c0000 0xc0000>; }; - partition@0x280000 { + partition@280000 { label = "kernel-nand"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "filesystem-nand"; reg = <0x780000 0x7880000>; }; @@ -170,19 +170,19 @@ label = "xloader-onenand"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "bootloader-onenand"; reg = <0x80000 0x40000>; }; - partition@0xc0000 { + partition@c0000 { label = "params-onenand"; reg = <0xc0000 0x20000>; }; - partition@0xe0000 { + partition@e0000 { label = "kernel-onenand"; reg = <0xe0000 0x200000>; }; - partition@0x2e0000 { + partition@2e0000 { label = "filesystem-onenand"; reg = <0x2e0000 0xfd20000>; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 814ab67c8c29..3e6801cecd04 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -60,22 +60,6 @@ "AFMR", "Line In"; }; - /* - * Temp hack: Need to be replaced with the proper gpio-controlled - * reset driver as soon it will be merged. - * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830 - */ - /* HS USB Port 1 RESET */ - hsusb1_reset: hsusb1_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb1_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 30 0>; /* gpio_62 */ - startup-delay-us = <70000>; - enable-active-high; - }; - /* HS USB Port 1 Power */ hsusb1_power: hsusb1_power_reg { compatible = "regulator-fixed"; @@ -97,7 +81,7 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb1_reset>; + reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ vcc-supply = <&hsusb1_power>; /** * FIXME: @@ -122,23 +106,9 @@ }; }; -&omap4_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6030_wkup_pins - >; - - twl6030_wkup_pins: pinmux_twl6030_wkup_pins { - pinctrl-single,pins = < - 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ - >; - }; -}; - &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < - &twl6030_pins &twl6040_pins &mcpdm_pins &mcbsp1_pins @@ -147,12 +117,6 @@ &hsusbb1_pins >; - twl6030_pins: pinmux_twl6030_pins { - pinctrl-single,pins = < - 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ - >; - }; - twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ @@ -305,6 +269,7 @@ }; #include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" &i2c2 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 4f78380ecdb8..5fc3f43c5a81 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -155,23 +155,9 @@ }; }; -&omap4_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6030_wkup_pins - >; - - twl6030_wkup_pins: pinmux_twl6030_wkup_pins { - pinctrl-single,pins = < - 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ - >; - }; -}; - &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < - &twl6030_pins &twl6040_pins &mcpdm_pins &dmic_pins @@ -206,12 +192,6 @@ >; }; - twl6030_pins: pinmux_twl6030_pins { - pinctrl-single,pins = < - 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ - >; - }; - twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ @@ -370,6 +350,7 @@ }; #include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" &i2c2 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 22d9f2b593d4..17a3618b190f 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -56,7 +56,7 @@ cache-level = <2>; }; - local-timer@0x48240600 { + local-timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x48240600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; @@ -114,6 +114,8 @@ reg = <0x4a100040 0x0196>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; @@ -122,6 +124,8 @@ reg = <0x4a31e040 0x0038>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; @@ -663,5 +667,23 @@ ram-bits = <12>; ti,has-mailbox; }; + + aes: aes@4b501000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x4b501000 0xa0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 111>, <&sdma 110>; + dma-names = "tx", "rx"; + }; + + des: des@480a5000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x480a5000 0xa0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 117>, <&sdma 116>; + dma-names = "tx", "rx"; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 65d7b601651c..d784b3a00410 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -27,21 +27,10 @@ regulator-max-microvolt = <3000000>; }; - /* HS USB Port 2 RESET */ - hsusb2_reset: hsusb2_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb2_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */ - startup-delay-us = <70000>; - enable-active-high; - }; - /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb2_reset>; + reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ /** * FIXME * Put the right clock phandle here when available @@ -51,21 +40,10 @@ clock-frequency = <19200000>; }; - /* HS USB Port 3 RESET */ - hsusb3_reset: hsusb3_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb3_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */ - startup-delay-us = <70000>; - enable-active-high; - }; - /* HS USB Host PHY on PORT 3 */ hsusb3_phy: hsusb3_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb3_reset>; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ }; leds { @@ -271,6 +249,14 @@ reg = <0x48>; interrupt-controller; #interrupt-cells = <2>; + ti,system-power-controller; + + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + }; palmas_pmic { compatible = "ti,palmas-pmic"; @@ -334,9 +320,18 @@ ti,smps-range = <0x80>; }; - smps10_reg: smps10 { + smps10_out2_reg: smps10_out2 { /* VBUS_5V_OTG */ - regulator-name = "smps10"; + regulator-name = "smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out1_reg: smps10_out1 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; @@ -470,6 +465,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7cdea1bfea09..6192c458bea1 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -604,7 +604,7 @@ ti,hwmods = "wd_timer2"; }; - emif1: emif@0x4c000000 { + emif1: emif@4c000000 { compatible = "ti,emif-4d5"; ti,hwmods = "emif1"; phy-type = <2>; /* DDR PHY type: Intelli PHY */ @@ -615,7 +615,7 @@ hw-caps-temp-alert; }; - emif2: emif@0x4d000000 { + emif2: emif@4d000000 { compatible = "ti,emif-4d5"; ti,hwmods = "emif2"; phy-type = <2>; /* DDR PHY type: Intelli PHY */ @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3@4a020000 { + usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi new file mode 100644 index 000000000000..a4fa5703c42b --- /dev/null +++ b/arch/arm/boot/dts/twl6030_omap4.dtsi @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&twl { + /* + * On most OMAP4 platforms, the twl6030 IRQ line is connected + * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is + * connected to the fref_clk0_out.sys_drm_msecure line. + * Therefore, configure the defaults for the SYS_NIRQ1 and + * fref_clk0_out.sys_drm_msecure pins here. + */ + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_pins + &twl6030_wkup_pins + >; +}; + +&omap4_pmx_wkup { + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ + >; + }; +}; + +&omap4_pmx_core { + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ + >; + }; +}; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 254cf0539439..98a50c309b90 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -1,14 +1,13 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_SLAB=y CONFIG_PROFILING=y CONFIG_OPROFILE=y @@ -20,22 +19,21 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_OMAP2PLUS=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX_DEBUG=y CONFIG_ARCH_OMAP2=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_ARCH_VEXPRESS_CA9X4=y +CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_LEDS=y +CONFIG_CMA=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -61,8 +59,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_BT=m @@ -77,14 +73,13 @@ CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CMA=y -CONFIG_DMA_CMA=y -CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_OMAP_OCP2SCP=y +CONFIG_CONNECTOR=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_OOPS=y CONFIG_MTD_CFI=y @@ -98,32 +93,40 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SENSORS_LIS3LV02D=m CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_LIS3_I2C=m CONFIG_BMP085_I2C=m +CONFIG_SENSORS_LIS3_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_MD=y CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -CONFIG_SMSC911X=y CONFIG_KS8851=y CONFIG_KS8851_MLL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_DEBUG=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +CONFIG_TI_CPSW=y +CONFIG_AT803X_PHY=y +CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC95XX=y CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_DEBUG=y +CONFIG_WL_TI=y +CONFIG_WL12XX=m +CONFIG_WL18XX=m +CONFIG_WLCORE_SPI=m +CONFIG_WLCORE_SDIO=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y @@ -133,7 +136,6 @@ CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -143,8 +145,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OMAP=y CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_HW_RANDOM=y @@ -158,31 +159,31 @@ CONFIG_GPIO_TWL4030=y CONFIG_W1=y CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_LM75=m -CONFIG_WATCHDOG=y CONFIG_THERMAL=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_CPU_THERMAL=y +CONFIG_TI_SOC_THERMAL=y +CONFIG_OMAP4_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y -CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_FB_OMAP_LCD_VGA=y CONFIG_OMAP2_DSS=m -CONFIG_OMAP2_DSS_RFBI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m @@ -194,12 +195,8 @@ CONFIG_DISPLAY_PANEL_DPI=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y -CONFIG_DISPLAY_SUPPORT=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -216,14 +213,14 @@ CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y +CONFIG_USB_DWC3=m CONFIG_USB_TEST=y -CONFIG_USB_PHY=y CONFIG_NOP_USB_XCEIV=y +CONFIG_OMAP_USB2=y +CONFIG_OMAP_USB3=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y @@ -232,7 +229,6 @@ CONFIG_USB_ZERO=m CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y -CONFIG_MMC_ARMMMCI=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y @@ -252,11 +248,8 @@ CONFIG_RTC_DRV_OMAP=y CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y -CONFIG_TI_SOC_THERMAL=y -CONFIG_TI_THERMAL=y -CONFIG_OMAP4_THERMAL=y -CONFIG_OMAP5_THERMAL=y -CONFIG_DRA752_THERMAL=y +CONFIG_EXTCON=y +CONFIG_EXTCON_PALMAS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set @@ -275,23 +268,18 @@ CONFIG_JFFS2_RUBIN=y CONFIG_UBIFS_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SECURITY=y CONFIG_CRYPTO_MICHAEL_MIC=y # CONFIG_CRYPTO_ANSI_CPRNG is not set @@ -300,9 +288,6 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y -CONFIG_SOC_OMAP5=y -CONFIG_TI_DAVINCI_MDIO=y -CONFIG_TI_DAVINCI_CPDMA=y -CONFIG_TI_CPSW=y -CONFIG_AT803X_PHY=y -CONFIG_SOC_DRA7XX=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b5fb5f7992df..f6a1db112168 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -94,6 +94,7 @@ config ARCH_OMAP2PLUS select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select HAVE_CLK + select MACH_OMAP_GENERIC select OMAP_DM_TIMER select PINCTRL select PROC_DEVICETREE if PROC_FS @@ -187,16 +188,11 @@ config OMAP_PACKAGE_CUS config OMAP_PACKAGE_CBP bool -comment "OMAP Board Type" +comment "OMAP Legacy Platform Data Board Type" depends on ARCH_OMAP2PLUS config MACH_OMAP_GENERIC - bool "Generic OMAP2+ board" - depends on ARCH_OMAP2PLUS - default y - help - Support for generic TI OMAP2+ boards using Flattened Device Tree. - More information at Documentation/devicetree + bool config MACH_OMAP2_TUSB6010 bool diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index afb457c3135b..f8d4a1b83864 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -233,7 +233,7 @@ obj-y += drm.o endif # Specific board support -obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o +obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 87162e1b94a5..3896b12b0006 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,13 +15,10 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/irqdomain.h> -#include <linux/clk.h> #include <asm/mach/arch.h> #include "common.h" -#include "common-board-devices.h" -#include "dss-common.h" #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) #define intc_of_init NULL @@ -36,40 +33,9 @@ static struct of_device_id omap_dt_match_table[] __initdata = { { } }; -/* - * Create alias for USB host PHY clock. - * Remove this when clock phandle can be provided via DT - */ -static void __init legacy_init_ehci_clk(char *clkname) -{ - int ret; - - ret = clk_add_alias("main_clk", NULL, clkname, NULL); - if (ret) { - pr_err("%s:Failed to add main_clk alias to %s :%d\n", - __func__, clkname, ret); - } -} - static void __init omap_generic_init(void) { - omap_sdrc_init(NULL, NULL); - - of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); - - /* - * HACK: call display setup code for selected boards to enable omapdss. - * This will be removed when omapdss supports DT. - */ - if (of_machine_is_compatible("ti,omap4-panda")) { - omap4_panda_display_init_of(); - legacy_init_ehci_clk("auxclk3_ck"); - - } - else if (of_machine_is_compatible("ti,omap4-sdp")) - omap_4430sdp_display_init_of(); - else if (of_machine_is_compatible("ti,omap5-uevm")) - legacy_init_ehci_clk("auxclk1_ck"); + pdata_quirks_init(omap_dt_match_table); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 06dbb2d3d38b..d648d50d9d24 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -43,6 +43,7 @@ #include "board-flash.h" #include "control.h" #include "gpmc-onenand.h" +#include "dss-common.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -50,7 +51,6 @@ #define IGEP2_GPIO_LED0_GREEN 26 #define IGEP2_GPIO_LED0_RED 27 #define IGEP2_GPIO_LED1_RED 28 -#define IGEP2_GPIO_DVI_PUP 170 #define IGEP2_RB_GPIO_WIFI_NPD 94 #define IGEP2_RB_GPIO_WIFI_NRESET 95 @@ -429,41 +429,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, }; -static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 3, -}; - -static struct platform_device omap3stalker_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &omap3stalker_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = IGEP2_GPIO_DVI_PUP, -}; - -static struct platform_device omap3stalker_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &omap3stalker_tfp410_pdata, -}; - -static struct omap_dss_board_info igep2_dss_data = { - .default_display_name = "dvi", -}; - -static struct platform_device *igep_devices[] __initdata = { - &igep_vwlan_device, - &omap3stalker_tfp410_device, - &omap3stalker_dvi_connector_device, -}; - static int igep2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -663,7 +628,8 @@ static void __init igep_init(void) /* Register I2C busses and drivers */ igep_i2c_init(); - platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); + platform_device_register(&igep_vwlan_device); + omap3_igep2_display_init_of(); omap_serial_init(); omap_sdrc_init(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params); @@ -681,7 +647,6 @@ static void __init igep_init(void) igep_wlan_bt_init(); if (machine_is_igep0020()) { - omap_display_init(&igep2_dss_data); igep2_init_smsc911x(); usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data)); usbhs_init(&igep2_usbhs_bdata); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 4a5684b96492..c6aebf0b42d8 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -288,6 +288,9 @@ static inline void omap4_cpu_resume(void) #endif +void pdata_quirks_init(struct of_device_id *); +void omap_pcs_legacy_init(int irq, void (*rearm)(void)); + struct omap_sdrc_params; extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 5c5315ba129b..5336c75926cd 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,7 +19,6 @@ #include <linux/of.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> -#include <linux/wl12xx.h> #include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> @@ -475,40 +474,6 @@ static void omap_init_vout(void) static inline void omap_init_vout(void) {} #endif -#if IS_ENABLED(CONFIG_WL12XX) - -static struct wl12xx_platform_data wl12xx __initdata; - -void __init omap_init_wl12xx_of(void) -{ - int ret; - - if (!of_have_populated_dt()) - return; - - if (of_machine_is_compatible("ti,omap4-sdp")) { - wl12xx.board_ref_clock = WL12XX_REFCLOCK_26; - wl12xx.board_tcxo_clock = WL12XX_TCXOCLOCK_26; - wl12xx.irq = gpio_to_irq(53); - } else if (of_machine_is_compatible("ti,omap4-panda")) { - wl12xx.board_ref_clock = WL12XX_REFCLOCK_38; - wl12xx.irq = gpio_to_irq(53); - } else { - return; - } - - ret = wl12xx_set_platform_data(&wl12xx); - if (ret) { - pr_err("error setting wl12xx data: %d\n", ret); - return; - } -} -#else -static inline void omap_init_wl12xx_of(void) -{ -} -#endif - /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -531,9 +496,6 @@ static int __init omap2_init_devices(void) omap_init_sham(); omap_init_aes(); omap_init_rng(); - } else { - /* These can be removed when bindings are done */ - omap_init_wl12xx_of(); } omap_init_sti(); omap_init_vout(); diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index bf89effa4c99..365bfd3d9c68 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -213,3 +213,47 @@ void __init omap_4430sdp_display_init_of(void) platform_device_register(&sdp4430_tpd_device); platform_device_register(&sdp4430_hdmi_connector_device); } + + +/* OMAP3 IGEPv2 data */ + +#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO 170 + +/* DVI Connector */ +static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, +}; + +static struct platform_device omap3_igep2_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3_igep2_dvi_connector_pdata, +}; + +/* TFP410 DPI-to-DVI chip */ +static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = IGEP2_DVI_TFP410_POWER_DOWN_GPIO, +}; + +static struct platform_device omap3_igep2_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3_igep2_tfp410_pdata, +}; + +static struct omap_dss_board_info igep2_dss_data = { + .default_display_name = "dvi", +}; + +void __init omap3_igep2_display_init_of(void) +{ + omap_display_init(&igep2_dss_data); + + platform_device_register(&omap3_igep2_tfp410_device); + platform_device_register(&omap3_igep2_dvi_connector_device); +} diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h index c28fe3c03588..a9becf0d5be8 100644 --- a/arch/arm/mach-omap2/dss-common.h +++ b/arch/arm/mach-omap2/dss-common.h @@ -8,5 +8,6 @@ void __init omap4_panda_display_init_of(void); void __init omap_4430sdp_display_init_of(void); +void __init omap3_igep2_display_init_of(void); #endif diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 579697adaae7..51525faa0aec 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1521,6 +1521,42 @@ err: return ret; } +/* + * REVISIT: Add timing support from slls644g.pdf + */ +static int gpmc_probe_8250(struct platform_device *pdev, + struct device_node *child) +{ + struct resource res; + unsigned long base; + int ret, cs; + + if (of_property_read_u32(child, "reg", &cs) < 0) { + dev_err(&pdev->dev, "%s has no 'reg' property\n", + child->full_name); + return -ENODEV; + } + + if (of_address_to_resource(child, 0, &res) < 0) { + dev_err(&pdev->dev, "%s has malformed 'reg' property\n", + child->full_name); + return -ENODEV; + } + + ret = gpmc_cs_request(cs, resource_size(&res), &base); + if (ret < 0) { + dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); + return ret; + } + + if (of_platform_device_create(child, NULL, &pdev->dev)) + return 0; + + dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); + + return -ENODEV; +} + static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1564,6 +1600,8 @@ static int gpmc_probe_dt(struct platform_device *pdev) else if (of_node_cmp(child->name, "ethernet") == 0 || of_node_cmp(child->name, "nor") == 0) ret = gpmc_probe_generic_child(pdev, child); + else if (of_node_cmp(child->name, "8250") == 0) + ret = gpmc_probe_8250(pdev, child); if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", __func__, child->full_name)) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index f82cf878d6af..48094b58c88f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -811,6 +811,12 @@ int __init omap_mux_late_init(void) } } + omap_mux_dbg_init(); + + /* see pinctrl-single-omap for the wake-up interrupt handling */ + if (of_have_populated_dt()) + return 0; + ret = request_irq(omap_prcm_event_to_irq("io"), omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND, "hwmod_io", omap_mux_late_init); @@ -818,8 +824,6 @@ int __init omap_mux_late_init(void) if (ret) pr_warning("mux: Failed to setup hwmod io irq %d\n", ret); - omap_mux_dbg_init(); - return 0; } diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c new file mode 100644 index 000000000000..10c71450cf63 --- /dev/null +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -0,0 +1,174 @@ +/* + * Legacy platform_data quirks + * + * Copyright (C) 2013 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/wl12xx.h> + +#include <linux/platform_data/pinctrl-single.h> + +#include "common.h" +#include "common-board-devices.h" +#include "dss-common.h" +#include "control.h" + +struct pdata_init { + const char *compatible; + void (*fn)(void); +}; + +/* + * Create alias for USB host PHY clock. + * Remove this when clock phandle can be provided via DT + */ +static void __init __used legacy_init_ehci_clk(char *clkname) +{ + int ret; + + ret = clk_add_alias("main_clk", NULL, clkname, NULL); + if (ret) + pr_err("%s:Failed to add main_clk alias to %s :%d\n", + __func__, clkname, ret); +} + +#if IS_ENABLED(CONFIG_WL12XX) + +static struct wl12xx_platform_data wl12xx __initdata; + +static void __init __used legacy_init_wl12xx(unsigned ref_clock, + unsigned tcxo_clock, + int gpio) +{ + int res; + + wl12xx.board_ref_clock = ref_clock; + wl12xx.board_tcxo_clock = tcxo_clock; + wl12xx.irq = gpio_to_irq(gpio); + + res = wl12xx_set_platform_data(&wl12xx); + if (res) { + pr_err("error setting wl12xx data: %d\n", res); + return; + } +} +#else +static inline void legacy_init_wl12xx(unsigned ref_clock, + unsigned tcxo_clock, + int gpio) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static void __init hsmmc2_internal_input_clk(void) +{ + u32 reg; + + reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1); + reg |= OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1); +} + +static void __init omap3_igep0020_legacy_init(void) +{ + omap3_igep2_display_init_of(); +} + +static void __init omap3_evm_legacy_init(void) +{ + legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149); +} + +static void __init omap3_zoom_legacy_init(void) +{ + legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162); +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#ifdef CONFIG_ARCH_OMAP4 +static void __init omap4_sdp_legacy_init(void) +{ + omap_4430sdp_display_init_of(); + legacy_init_wl12xx(WL12XX_REFCLOCK_26, + WL12XX_TCXOCLOCK_26, 53); +} + +static void __init omap4_panda_legacy_init(void) +{ + omap4_panda_display_init_of(); + legacy_init_ehci_clk("auxclk3_ck"); + legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53); +} +#endif + +#ifdef CONFIG_SOC_OMAP5 +static void __init omap5_uevm_legacy_init(void) +{ + legacy_init_ehci_clk("auxclk1_ck"); +} +#endif + +static struct pcs_pdata pcs_pdata; + +void omap_pcs_legacy_init(int irq, void (*rearm)(void)) +{ + pcs_pdata.irq = irq; + pcs_pdata.rearm = rearm; +} + +struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { +#ifdef CONFIG_ARCH_OMAP3 + OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata), +#endif +#ifdef CONFIG_ARCH_OMAP4 + OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata), +#endif + { /* sentinel */ }, +}; + +static struct pdata_init pdata_quirks[] __initdata = { +#ifdef CONFIG_ARCH_OMAP3 + { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, + { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, + { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, + { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, + { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, +#endif +#ifdef CONFIG_ARCH_OMAP4 + { "ti,omap4-sdp", omap4_sdp_legacy_init, }, + { "ti,omap4-panda", omap4_panda_legacy_init, }, +#endif +#ifdef CONFIG_SOC_OMAP5 + { "ti,omap5-uevm", omap5_uevm_legacy_init, }, +#endif + { /* sentinel */ }, +}; + +void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table) +{ + struct pdata_init *quirks = pdata_quirks; + + omap_sdrc_init(NULL, NULL); + of_platform_populate(NULL, omap_dt_match_table, + omap_auxdata_lookup, NULL); + + while (quirks->compatible) { + if (of_machine_is_compatible(quirks->compatible)) { + if (quirks->fn) + quirks->fn(); + break; + } + quirks++; + } +} diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index 277f71794e61..f8eb83323b1a 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -144,7 +144,13 @@ extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); -extern void omap3xxx_prm_reconfigure_io_chain(void); +#ifdef CONFIG_ARCH_OMAP3 +void omap3xxx_prm_reconfigure_io_chain(void); +#else +static inline void omap3xxx_prm_reconfigure_io_chain(void) +{ +} +#endif /* PRM interrupt-related functions */ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index 7cd22abb8f15..a085d9cc1f5d 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -42,7 +42,13 @@ extern u32 omap4_prm_vcvp_read(u8 offset); extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); -extern void omap44xx_prm_reconfigure_io_chain(void); +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +void omap44xx_prm_reconfigure_io_chain(void); +#else +static inline void omap44xx_prm_reconfigure_io_chain(void) +{ +} +#endif /* PRM interrupt-related functions */ extern void omap44xx_prm_read_pending_irqs(unsigned long *events); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 228b850e632f..a2e1174ad1b6 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,6 +24,7 @@ #include <linux/interrupt.h> #include <linux/slab.h> +#include "soc.h" #include "prm2xxx_3xxx.h" #include "prm2xxx.h" #include "prm3xxx.h" @@ -322,6 +323,16 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) prcm_irq_chips[i] = gc; } + if (of_have_populated_dt()) { + int irq = omap_prcm_event_to_irq("io"); + if (cpu_is_omap34xx()) + omap_pcs_legacy_init(irq, + omap3xxx_prm_reconfigure_io_chain); + else + omap_pcs_legacy_init(irq, + omap44xx_prm_reconfigure_io_chain); + } + return 0; err: diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index a82ace4d9a20..c2aada71c915 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -15,15 +15,21 @@ #include <linux/slab.h> #include <linux/err.h> #include <linux/list.h> +#include <linux/interrupt.h> + +#include <linux/irqchip/chained_irq.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pinctrl-single.h> + #include "core.h" #include "pinconf.h" @@ -150,19 +156,36 @@ struct pcs_name { }; /** + * struct pcs_soc_data - SoC specific settings + * @flags: initial SoC specific PCS_FEAT_xxx values + * @irq: optional interrupt for the controller + * @irq_enable_mask: optional SoC specific interrupt enable mask + * @irq_status_mask: optional SoC specific interrupt status mask + * @rearm: optional SoC specific wake-up rearm function + */ +struct pcs_soc_data { + unsigned flags; + int irq; + unsigned irq_enable_mask; + unsigned irq_status_mask; + void (*rearm)(void); +}; + +/** * struct pcs_device - pinctrl device instance * @res: resources * @base: virtual address of the controller * @size: size of the ioremapped area * @dev: device entry * @pctl: pin controller device + * @flags: mask of PCS_FEAT_xxx values + * @lock: spinlock for register access * @mutex: mutex protecting the lists * @width: bits per mux register * @fmask: function register mask * @fshift: function register shift * @foff: value to turn mux off * @fmax: max number of functions in fmask - * @is_pinconf: whether supports pinconf * @bits_per_pin:number of bits per pin * @names: array of register names for pins * @pins: physical pins on the SoC @@ -171,6 +194,9 @@ struct pcs_name { * @pingroups: list of pingroups * @functions: list of functions * @gpiofuncs: list of gpio functions + * @irqs: list of interrupt registers + * @chip: chip container for this instance + * @domain: IRQ domain for this instance * @ngroups: number of pingroups * @nfuncs: number of functions * @desc: pin controller descriptor @@ -183,6 +209,12 @@ struct pcs_device { unsigned size; struct device *dev; struct pinctrl_dev *pctl; + unsigned flags; +#define PCS_QUIRK_SHARED_IRQ (1 << 2) +#define PCS_FEAT_IRQ (1 << 1) +#define PCS_FEAT_PINCONF (1 << 0) + struct pcs_soc_data socdata; + raw_spinlock_t lock; struct mutex mutex; unsigned width; unsigned fmask; @@ -190,7 +222,6 @@ struct pcs_device { unsigned foff; unsigned fmax; bool bits_per_mux; - bool is_pinconf; unsigned bits_per_pin; struct pcs_name *names; struct pcs_data pins; @@ -199,6 +230,9 @@ struct pcs_device { struct list_head pingroups; struct list_head functions; struct list_head gpiofuncs; + struct list_head irqs; + struct irq_chip chip; + struct irq_domain *domain; unsigned ngroups; unsigned nfuncs; struct pinctrl_desc desc; @@ -206,6 +240,10 @@ struct pcs_device { void (*write)(unsigned val, void __iomem *reg); }; +#define PCS_QUIRK_HAS_SHARED_IRQ (pcs->flags & PCS_QUIRK_SHARED_IRQ) +#define PCS_HAS_IRQ (pcs->flags & PCS_FEAT_IRQ) +#define PCS_HAS_PINCONF (pcs->flags & PCS_FEAT_PINCONF) + static int pcs_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin, unsigned long *config); static int pcs_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, @@ -429,9 +467,11 @@ static int pcs_enable(struct pinctrl_dev *pctldev, unsigned fselector, for (i = 0; i < func->nvals; i++) { struct pcs_func_vals *vals; + unsigned long flags; unsigned val, mask; vals = &func->vals[i]; + raw_spin_lock_irqsave(&pcs->lock, flags); val = pcs->read(vals->reg); if (pcs->bits_per_mux) @@ -442,6 +482,7 @@ static int pcs_enable(struct pinctrl_dev *pctldev, unsigned fselector, val &= ~mask; val |= (vals->val & mask); pcs->write(val, vals->reg); + raw_spin_unlock_irqrestore(&pcs->lock, flags); } return 0; @@ -483,13 +524,16 @@ static void pcs_disable(struct pinctrl_dev *pctldev, unsigned fselector, for (i = 0; i < func->nvals; i++) { struct pcs_func_vals *vals; + unsigned long flags; unsigned val; vals = &func->vals[i]; + raw_spin_lock_irqsave(&pcs->lock, flags); val = pcs->read(vals->reg); val &= ~pcs->fmask; val |= pcs->foff << pcs->fshift; pcs->write(val, vals->reg); + raw_spin_unlock_irqrestore(&pcs->lock, flags); } } @@ -1060,7 +1104,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, }; /* If pinconf isn't supported, don't parse properties in below. */ - if (!pcs->is_pinconf) + if (!PCS_HAS_PINCONF) return 0; /* cacluate how much properties are supported in current node */ @@ -1184,7 +1228,7 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, (*map)->data.mux.group = np->name; (*map)->data.mux.function = np->name; - if (pcs->is_pinconf) { + if (PCS_HAS_PINCONF) { res = pcs_parse_pinconf(pcs, np, function, map); if (res) goto free_pingroups; @@ -1305,7 +1349,7 @@ static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs, (*map)->data.mux.group = np->name; (*map)->data.mux.function = np->name; - if (pcs->is_pinconf) { + if (PCS_HAS_PINCONF) { dev_err(pcs->dev, "pinconf not supported\n"); goto free_pingroups; } @@ -1440,11 +1484,33 @@ static void pcs_free_pingroups(struct pcs_device *pcs) } /** + * pcs_irq_free() - free interrupt + * @pcs: pcs driver instance + */ +static void pcs_irq_free(struct pcs_device *pcs) +{ + struct pcs_soc_data *pcs_soc = &pcs->socdata; + + if (pcs_soc->irq < 0) + return; + + if (pcs->domain) + irq_domain_remove(pcs->domain); + + if (PCS_QUIRK_HAS_SHARED_IRQ) + free_irq(pcs_soc->irq, pcs_soc); + else + irq_set_chained_handler(pcs_soc->irq, NULL); +} + +/** * pcs_free_resources() - free memory used by this driver * @pcs: pcs driver instance */ static void pcs_free_resources(struct pcs_device *pcs) { + pcs_irq_free(pcs); + if (pcs->pctl) pinctrl_unregister(pcs->pctl); @@ -1493,6 +1559,263 @@ static int pcs_add_gpio_func(struct device_node *node, struct pcs_device *pcs) } return ret; } +/** + * @reg: virtual address of interrupt register + * @hwirq: hardware irq number + * @irq: virtual irq number + * @node: list node + */ +struct pcs_interrupt { + void __iomem *reg; + irq_hw_number_t hwirq; + unsigned int irq; + struct list_head node; +}; + +/** + * pcs_irq_set() - enables or disables an interrupt + * + * Note that this currently assumes one interrupt per pinctrl + * register that is typically used for wake-up events. + */ +static inline void pcs_irq_set(struct pcs_soc_data *pcs_soc, + int irq, const bool enable) +{ + struct pcs_device *pcs; + struct list_head *pos; + unsigned mask; + + pcs = container_of(pcs_soc, struct pcs_device, socdata); + list_for_each(pos, &pcs->irqs) { + struct pcs_interrupt *pcswi; + unsigned soc_mask; + + pcswi = list_entry(pos, struct pcs_interrupt, node); + if (irq != pcswi->irq) + continue; + + soc_mask = pcs_soc->irq_enable_mask; + raw_spin_lock(&pcs->lock); + mask = pcs->read(pcswi->reg); + if (enable) + mask |= soc_mask; + else + mask &= ~soc_mask; + pcs->write(mask, pcswi->reg); + raw_spin_unlock(&pcs->lock); + } +} + +/** + * pcs_irq_mask() - mask pinctrl interrupt + * @d: interrupt data + */ +static void pcs_irq_mask(struct irq_data *d) +{ + struct pcs_soc_data *pcs_soc = irq_data_get_irq_chip_data(d); + + pcs_irq_set(pcs_soc, d->irq, false); +} + +/** + * pcs_irq_unmask() - unmask pinctrl interrupt + * @d: interrupt data + */ +static void pcs_irq_unmask(struct irq_data *d) +{ + struct pcs_soc_data *pcs_soc = irq_data_get_irq_chip_data(d); + + pcs_irq_set(pcs_soc, d->irq, true); + if (pcs_soc->rearm) + pcs_soc->rearm(); +} + +/** + * pcs_irq_set_wake() - toggle the suspend and resume wake up + * @d: interrupt data + * @state: wake-up state + * + * Note that this should be called only for suspend and resume. + * For runtime PM, the wake-up events should be enabled by default. + */ +static int pcs_irq_set_wake(struct irq_data *d, unsigned int state) +{ + if (state) + pcs_irq_unmask(d); + else + pcs_irq_mask(d); + + return 0; +} + +/** + * pcs_irq_handle() - common interrupt handler + * @pcs_irq: interrupt data + * + * Note that this currently assumes we have one interrupt bit per + * mux register. This interrupt is typically used for wake-up events. + * For more complex interrupts different handlers can be specified. + */ +static int pcs_irq_handle(struct pcs_soc_data *pcs_soc) +{ + struct pcs_device *pcs; + struct list_head *pos; + int count = 0; + + pcs = container_of(pcs_soc, struct pcs_device, socdata); + list_for_each(pos, &pcs->irqs) { + struct pcs_interrupt *pcswi; + unsigned mask; + + pcswi = list_entry(pos, struct pcs_interrupt, node); + raw_spin_lock(&pcs->lock); + mask = pcs->read(pcswi->reg); + raw_spin_unlock(&pcs->lock); + if (mask & pcs_soc->irq_status_mask) { + generic_handle_irq(irq_find_mapping(pcs->domain, + pcswi->hwirq)); + count++; + } + } + + /* + * For debugging on omaps, you may want to call pcs_soc->rearm() + * here to see wake-up interrupts during runtime also. + */ + + return count; +} + +/** + * pcs_irq_handler() - handler for the shared interrupt case + * @irq: interrupt + * @d: data + * + * Use this for cases where multiple instances of + * pinctrl-single share a single interrupt like on omaps. + */ +static irqreturn_t pcs_irq_handler(int irq, void *d) +{ + struct pcs_soc_data *pcs_soc = d; + + return pcs_irq_handle(pcs_soc) ? IRQ_HANDLED : IRQ_NONE; +} + +/** + * pcs_irq_handle() - handler for the dedicated chained interrupt case + * @irq: interrupt + * @desc: interrupt descriptor + * + * Use this if you have a separate interrupt for each + * pinctrl-single instance. + */ +static void pcs_irq_chain_handler(unsigned int irq, struct irq_desc *desc) +{ + struct pcs_soc_data *pcs_soc = irq_desc_get_handler_data(desc); + struct irq_chip *chip; + int res; + + chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); + res = pcs_irq_handle(pcs_soc); + /* REVISIT: export and add handle_bad_irq(irq, desc)? */ + chained_irq_exit(chip, desc); + + return; +} + +static int pcs_irqdomain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct pcs_soc_data *pcs_soc = d->host_data; + struct pcs_device *pcs; + struct pcs_interrupt *pcswi; + + pcs = container_of(pcs_soc, struct pcs_device, socdata); + pcswi = devm_kzalloc(pcs->dev, sizeof(*pcswi), GFP_KERNEL); + if (!pcswi) + return -ENOMEM; + + pcswi->reg = pcs->base + hwirq; + pcswi->hwirq = hwirq; + pcswi->irq = irq; + + mutex_lock(&pcs->mutex); + list_add_tail(&pcswi->node, &pcs->irqs); + mutex_unlock(&pcs->mutex); + + irq_set_chip_data(irq, pcs_soc); + irq_set_chip_and_handler(irq, &pcs->chip, + handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static struct irq_domain_ops pcs_irqdomain_ops = { + .map = pcs_irqdomain_map, + .xlate = irq_domain_xlate_onecell, +}; + +/** + * pcs_irq_init_chained_handler() - set up a chained interrupt handler + * @pcs: pcs driver instance + * @np: device node pointer + */ +static int pcs_irq_init_chained_handler(struct pcs_device *pcs, + struct device_node *np) +{ + struct pcs_soc_data *pcs_soc = &pcs->socdata; + const char *name = "pinctrl"; + int num_irqs; + + if (!pcs_soc->irq_enable_mask || + !pcs_soc->irq_status_mask) { + pcs_soc->irq = -1; + return -EINVAL; + } + + INIT_LIST_HEAD(&pcs->irqs); + pcs->chip.name = name; + pcs->chip.irq_ack = pcs_irq_mask; + pcs->chip.irq_mask = pcs_irq_mask; + pcs->chip.irq_unmask = pcs_irq_unmask; + pcs->chip.irq_set_wake = pcs_irq_set_wake; + + if (PCS_QUIRK_HAS_SHARED_IRQ) { + int res; + + res = request_irq(pcs_soc->irq, pcs_irq_handler, + IRQF_SHARED | IRQF_NO_SUSPEND, + name, pcs_soc); + if (res) { + pcs_soc->irq = -1; + return res; + } + } else { + irq_set_handler_data(pcs_soc->irq, pcs_soc); + irq_set_chained_handler(pcs_soc->irq, + pcs_irq_chain_handler); + } + + /* + * We can use the register offset as the hardirq + * number as irq_domain_add_simple maps them lazily. + * This way we can easily support more than one + * interrupt per function if needed. + */ + num_irqs = pcs->size; + + pcs->domain = irq_domain_add_simple(np, num_irqs, 0, + &pcs_irqdomain_ops, + pcs_soc); + if (!pcs->domain) { + irq_set_chained_handler(pcs_soc->irq, NULL); + return -EINVAL; + } + + return 0; +} #ifdef CONFIG_PM static int pinctrl_single_suspend(struct platform_device *pdev, @@ -1523,8 +1846,10 @@ static int pcs_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; + struct pcs_pdata *pdata; struct resource *res; struct pcs_device *pcs; + const struct pcs_soc_data *soc; int ret; match = of_match_device(pcs_of_match, &pdev->dev); @@ -1537,11 +1862,14 @@ static int pcs_probe(struct platform_device *pdev) return -ENOMEM; } pcs->dev = &pdev->dev; + raw_spin_lock_init(&pcs->lock); mutex_init(&pcs->mutex); INIT_LIST_HEAD(&pcs->pingroups); INIT_LIST_HEAD(&pcs->functions); INIT_LIST_HEAD(&pcs->gpiofuncs); - pcs->is_pinconf = match->data; + soc = match->data; + pcs->flags = soc->flags; + memcpy(&pcs->socdata, soc, sizeof(*soc)); PCS_GET_PROP_U32("pinctrl-single,register-width", &pcs->width, "register width not specified\n"); @@ -1610,7 +1938,7 @@ static int pcs_probe(struct platform_device *pdev) pcs->desc.name = DRIVER_NAME; pcs->desc.pctlops = &pcs_pinctrl_ops; pcs->desc.pmxops = &pcs_pinmux_ops; - if (pcs->is_pinconf) + if (PCS_HAS_PINCONF) pcs->desc.confops = &pcs_pinconf_ops; pcs->desc.owner = THIS_MODULE; @@ -1629,6 +1957,27 @@ static int pcs_probe(struct platform_device *pdev) if (ret < 0) goto free; + pcs->socdata.irq = irq_of_parse_and_map(np, 0); + if (pcs->socdata.irq) + pcs->flags |= PCS_FEAT_IRQ; + + /* We still need auxdata for some omaps for PRM interrupts */ + pdata = dev_get_platdata(&pdev->dev); + if (pdata) { + if (pdata->rearm) + pcs->socdata.rearm = pdata->rearm; + if (pdata->irq) { + pcs->socdata.irq = pdata->irq; + pcs->flags |= PCS_FEAT_IRQ; + } + } + + if (PCS_HAS_IRQ) { + ret = pcs_irq_init_chained_handler(pcs, np); + if (ret < 0) + dev_warn(pcs->dev, "initialized with no interrupts\n"); + } + dev_info(pcs->dev, "%i pins at pa %p size %u\n", pcs->desc.npins, pcs->base, pcs->size); @@ -1652,9 +2001,25 @@ static int pcs_remove(struct platform_device *pdev) return 0; } +static const struct pcs_soc_data pinctrl_single_omap_wkup = { + .flags = PCS_QUIRK_SHARED_IRQ, + .irq_enable_mask = (1 << 14), /* OMAP_WAKEUP_EN */ + .irq_status_mask = (1 << 15), /* OMAP_WAKEUP_EVENT */ +}; + +static const struct pcs_soc_data pinctrl_single = { +}; + +static const struct pcs_soc_data pinconf_single = { + .flags = PCS_FEAT_PINCONF, +}; + static struct of_device_id pcs_of_match[] = { - { .compatible = "pinctrl-single", .data = (void *)false }, - { .compatible = "pinconf-single", .data = (void *)true }, + { .compatible = "ti,omap3-padconf", .data = &pinctrl_single_omap_wkup }, + { .compatible = "ti,omap4-padconf", .data = &pinctrl_single_omap_wkup }, + { .compatible = "ti,omap5-padconf", .data = &pinctrl_single_omap_wkup }, + { .compatible = "pinctrl-single", .data = &pinctrl_single }, + { .compatible = "pinconf-single", .data = &pinconf_single }, { }, }; MODULE_DEVICE_TABLE(of, pcs_of_match); diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h new file mode 100644 index 000000000000..002a2855c046 --- /dev/null +++ b/include/dt-bindings/pinctrl/dra.h @@ -0,0 +1,50 @@ +/* + * This header provides constants for DRA pinctrl bindings. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _DT_BINDINGS_PINCTRL_DRA_H +#define _DT_BINDINGS_PINCTRL_DRA_H + +/* DRA7 mux mode options for each pin. See TRM for options */ +#define MUX_MODE0 0x0 +#define MUX_MODE1 0x1 +#define MUX_MODE2 0x2 +#define MUX_MODE3 0x3 +#define MUX_MODE4 0x4 +#define MUX_MODE5 0x5 +#define MUX_MODE6 0x6 +#define MUX_MODE7 0x7 +#define MUX_MODE8 0x8 +#define MUX_MODE9 0x9 +#define MUX_MODE10 0xa +#define MUX_MODE11 0xb +#define MUX_MODE12 0xc +#define MUX_MODE13 0xd +#define MUX_MODE14 0xe +#define MUX_MODE15 0xf + +#define PULL_ENA (1 << 16) +#define PULL_UP (1 << 17) +#define INPUT_EN (1 << 18) +#define SLEWCONTROL (1 << 19) +#define WAKEUP_EN (1 << 24) +#define WAKEUP_EVENT (1 << 25) + +/* Active pin states */ +#define PIN_OUTPUT 0 +#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP) +#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA) +#define PIN_INPUT INPUT_EN +#define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL) +#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) + +#endif + diff --git a/include/linux/platform_data/pinctrl-single.h b/include/linux/platform_data/pinctrl-single.h new file mode 100644 index 000000000000..72eacda9b360 --- /dev/null +++ b/include/linux/platform_data/pinctrl-single.h @@ -0,0 +1,12 @@ +/** + * irq: optional wake-up interrupt + * rearm: optional soc specific rearm function + * + * Note that the irq and rearm setup should come from device + * tree except for omap where there are still some dependencies + * to the legacy PRM code. + */ +struct pcs_pdata { + int irq; + void (*rearm)(void); +}; |