diff options
| -rw-r--r-- | drivers/gpu/drm/radeon/cik.c | 142 | ||||
| -rw-r--r-- | drivers/gpu/drm/radeon/cikd.h | 47 |
2 files changed, 189 insertions, 0 deletions
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index ba242eb256e1..a44ede6b0707 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -2777,3 +2777,145 @@ void cik_vm_flush(struct radeon_device *rdev, int ridx, struct radeon_vm *vm) radeon_ring_write(ring, 0x0); } +/* + * RLC + * The RLC is a multi-purpose microengine that handles a + * variety of functions, the most important of which is + * the interrupt controller. + */ +/** + * cik_rlc_stop - stop the RLC ME + * + * @rdev: radeon_device pointer + * + * Halt the RLC ME (MicroEngine) (CIK). + */ +static void cik_rlc_stop(struct radeon_device *rdev) +{ + int i, j, k; + u32 mask, tmp; + + tmp = RREG32(CP_INT_CNTL_RING0); + tmp &= ~(CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE); + WREG32(CP_INT_CNTL_RING0, tmp); + + RREG32(CB_CGTT_SCLK_CTRL); + RREG32(CB_CGTT_SCLK_CTRL); + RREG32(CB_CGTT_SCLK_CTRL); + RREG32(CB_CGTT_SCLK_CTRL); + + tmp = RREG32(RLC_CGCG_CGLS_CTRL) & 0xfffffffc; + WREG32(RLC_CGCG_CGLS_CTRL, tmp); + + WREG32(RLC_CNTL, 0); + + for (i = 0; i < rdev->config.cik.max_shader_engines; i++) { + for (j = 0; j < rdev->config.cik.max_sh_per_se; j++) { + cik_select_se_sh(rdev, i, j); + for (k = 0; k < rdev->usec_timeout; k++) { + if (RREG32(RLC_SERDES_CU_MASTER_BUSY) == 0) + break; + udelay(1); + } + } + } + cik_select_se_sh(rdev, 0xffffffff, 0xffffffff); + + mask = SE_MASTER_BUSY_MASK | GC_MASTER_BUSY | TC0_MASTER_BUSY | TC1_MASTER_BUSY; + for (k = 0; k < rdev->usec_timeout; k++) { + if ((RREG32(RLC_SERDES_NONCU_MASTER_BUSY) & mask) == 0) + break; + udelay(1); + } +} + +/** + * cik_rlc_start - start the RLC ME + * + * @rdev: radeon_device pointer + * + * Unhalt the RLC ME (MicroEngine) (CIK). + */ +static void cik_rlc_start(struct radeon_device *rdev) +{ + u32 tmp; + + WREG32(RLC_CNTL, RLC_ENABLE); + + tmp = RREG32(CP_INT_CNTL_RING0); + tmp |= (CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE); + WREG32(CP_INT_CNTL_RING0, tmp); + + udelay(50); +} + +/** + * cik_rlc_resume - setup the RLC hw + * + * @rdev: radeon_device pointer + * + * Initialize the RLC registers, load the ucode, + * and start the RLC (CIK). + * Returns 0 for success, -EINVAL if the ucode is not available. + */ +static int cik_rlc_resume(struct radeon_device *rdev) +{ + u32 i, size; + u32 clear_state_info[3]; + const __be32 *fw_data; + + if (!rdev->rlc_fw) + return -EINVAL; + + switch (rdev->family) { + case CHIP_BONAIRE: + default: + size = BONAIRE_RLC_UCODE_SIZE; + break; + case CHIP_KAVERI: + size = KV_RLC_UCODE_SIZE; + break; + case CHIP_KABINI: + size = KB_RLC_UCODE_SIZE; + break; + } + + cik_rlc_stop(rdev); + + WREG32(GRBM_SOFT_RESET, SOFT_RESET_RLC); + RREG32(GRBM_SOFT_RESET); + udelay(50); + WREG32(GRBM_SOFT_RESET, 0); + RREG32(GRBM_SOFT_RESET); + udelay(50); + + WREG32(RLC_LB_CNTR_INIT, 0); + WREG32(RLC_LB_CNTR_MAX, 0x00008000); + + cik_select_se_sh(rdev, 0xffffffff, 0xffffffff); + WREG32(RLC_LB_INIT_CU_MASK, 0xffffffff); + WREG32(RLC_LB_PARAMS, 0x00600408); + WREG32(RLC_LB_CNTL, 0x80000004); + + WREG32(RLC_MC_CNTL, 0); + WREG32(RLC_UCODE_CNTL, 0); + + fw_data = (const __be32 *)rdev->rlc_fw->data; + WREG32(RLC_GPM_UCODE_ADDR, 0); + for (i = 0; i < size; i++) + WREG32(RLC_GPM_UCODE_DATA, be32_to_cpup(fw_data++)); + WREG32(RLC_GPM_UCODE_ADDR, 0); + + /* XXX */ + clear_state_info[0] = 0;//upper_32_bits(rdev->rlc.save_restore_gpu_addr); + clear_state_info[1] = 0;//rdev->rlc.save_restore_gpu_addr; + clear_state_info[2] = 0;//cik_default_size; + WREG32(RLC_GPM_SCRATCH_ADDR, 0x3d); + for (i = 0; i < 3; i++) + WREG32(RLC_GPM_SCRATCH_DATA, clear_state_info[i]); + WREG32(RLC_DRIVER_DMA_STATUS, 0); + + cik_rlc_start(rdev); + + return 0; +} diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h index 783cf6005803..a11602012496 100644 --- a/drivers/gpu/drm/radeon/cikd.h +++ b/drivers/gpu/drm/radeon/cikd.h @@ -497,10 +497,55 @@ #define CP_MEC_ME2_UCODE_ADDR 0xC178 #define CP_MEC_ME2_UCODE_DATA 0xC17C +#define CP_INT_CNTL_RING0 0xC1A8 +# define CNTX_BUSY_INT_ENABLE (1 << 19) +# define CNTX_EMPTY_INT_ENABLE (1 << 20) +# define PRIV_INSTR_INT_ENABLE (1 << 22) +# define PRIV_REG_INT_ENABLE (1 << 23) +# define TIME_STAMP_INT_ENABLE (1 << 26) +# define CP_RINGID2_INT_ENABLE (1 << 29) +# define CP_RINGID1_INT_ENABLE (1 << 30) +# define CP_RINGID0_INT_ENABLE (1 << 31) + #define CP_MAX_CONTEXT 0xC2B8 #define CP_RB0_BASE_HI 0xC2C4 +#define RLC_CNTL 0xC300 +# define RLC_ENABLE (1 << 0) + +#define RLC_MC_CNTL 0xC30C + +#define RLC_LB_CNTR_MAX 0xC348 + +#define RLC_LB_CNTL 0xC364 + +#define RLC_LB_CNTR_INIT 0xC36C + +#define RLC_SAVE_AND_RESTORE_BASE 0xC374 +#define RLC_DRIVER_DMA_STATUS 0xC378 + +#define RLC_GPM_UCODE_ADDR 0xC388 +#define RLC_GPM_UCODE_DATA 0xC38C + +#define RLC_UCODE_CNTL 0xC39C + +#define RLC_CGCG_CGLS_CTRL 0xC424 + +#define RLC_LB_INIT_CU_MASK 0xC43C + +#define RLC_LB_PARAMS 0xC444 + +#define RLC_SERDES_CU_MASTER_BUSY 0xC484 +#define RLC_SERDES_NONCU_MASTER_BUSY 0xC488 +# define SE_MASTER_BUSY_MASK 0x0000ffff +# define GC_MASTER_BUSY (1 << 16) +# define TC0_MASTER_BUSY (1 << 17) +# define TC1_MASTER_BUSY (1 << 18) + +#define RLC_GPM_SCRATCH_ADDR 0xC4B0 +#define RLC_GPM_SCRATCH_DATA 0xC4B4 + #define PA_SC_RASTER_CONFIG 0x28350 # define RASTER_CONFIG_RB_MAP_0 0 # define RASTER_CONFIG_RB_MAP_1 1 @@ -599,6 +644,8 @@ #define TCC_DISABLE_MASK 0xFFFF0000 #define TCC_DISABLE_SHIFT 16 +#define CB_CGTT_SCLK_CTRL 0x3c2a0 + /* * PM4 */ |