diff options
Diffstat (limited to 'Documentation')
5 files changed, 30 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt index 19df842c694f..8163d565f697 100644 --- a/Documentation/devicetree/bindings/clock/imx31-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx31-clock.txt @@ -77,7 +77,7 @@ Examples: clks: ccm@53f80000{ compatible = "fsl,imx31-ccm"; reg = <0x53f80000 0x4000>; - interrupts = <0 31 0x04 0 53 0x04>; + interrupts = <31>, <53>; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt b/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt index 4fd0c2ecbc6e..90ccfa7c62e2 100644 --- a/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt +++ b/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt @@ -271,6 +271,8 @@ Optional properties: "trigger_sw_te" = Software trigger and TE - qcom,mdss-dsi-panel-framerate: Specifies the frame rate for the panel. 60 = 60 frames per second (default) +- qcom,mdss-dsi-host-esc-clk-freq-hz: Specifies the escape clock needed for the host. + 19200000 = 19.2 MHz (default) - qcom,mdss-dsi-panel-clockrate: A 64 bit value specifies the panel clock speed in Hz. 0 = default value. - qcom,mdss-mdp-kickoff-threshold: This property can be used to define a region @@ -657,6 +659,7 @@ Example: qcom,mdss-dsi-mdp-trigger = <0>; qcom,mdss-dsi-dma-trigger = <0>; qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-host-esc-clk-freq-hz = <19200000>; qcom,mdss-dsi-panel-clockrate = <424000000>; qcom,mdss-mdp-kickoff-threshold = <11 2430>; qcom,mdss-mdp-kickoff-delay = <1000>; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,wcn3990-wifi.txt b/Documentation/devicetree/bindings/net/wireless/qcom,wcn3990-wifi.txt index 626ca2124366..acc850773210 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,wcn3990-wifi.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,wcn3990-wifi.txt @@ -9,8 +9,26 @@ receive(RX)/transmit(TX) control. Required properties: - compatible: "qcom,wcn3990-wifi"; + - reg: Memory regions defined as starting address and size + - reg-names: Names of the memory regions defined in reg entry + - interrupts: Copy engine interrupt table Example: - qcom,msm_ath10k@18000000 { + msm_ath10k_wlan: qcom,msm_ath10k_wlan@18800000 { compatible = "qcom,wcn3990-wifi"; + reg = <0x18800000 0x800000>; + reg-names = "membase"; + interrupts = + <0 130 0 /* CE0 */ >, + <0 131 0 /* CE1 */ >, + <0 132 0 /* CE2 */ >, + <0 133 0 /* CE3 */ >, + <0 134 0 /* CE4 */ >, + <0 135 0 /* CE5 */ >, + <0 136 0 /* CE6 */ >, + <0 137 0 /* CE7 */ >, + <0 138 0 /* CE8 */ >, + <0 139 0 /* CE9 */ >, + <0 140 0 /* CE10 */ >, + <0 141 0 /* CE11 */ >; }; diff --git a/Documentation/devicetree/bindings/platform/msm/msm_rmnet_mhi.txt b/Documentation/devicetree/bindings/platform/msm/msm_rmnet_mhi.txt index d377a28e6617..f19dfa4b69c6 100644 --- a/Documentation/devicetree/bindings/platform/msm/msm_rmnet_mhi.txt +++ b/Documentation/devicetree/bindings/platform/msm/msm_rmnet_mhi.txt @@ -41,6 +41,12 @@ Main node properties: Definition: Maximum payload interface support on transmit path. If not defined MHI_MAX_MTU is used. +- qcom,interface-name + Usage: optional + Value type: <string> + Definition: optional string to overwrite default interface name. If + not defined string RMNET_MHI_DRIVER_NAME is used. + ======== Example: ======== diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 092ee9fbaf2b..df8ab4fc240a 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1991,6 +1991,7 @@ registers, find a list below: PPC | KVM_REG_PPC_TM_VSCR | 32 PPC | KVM_REG_PPC_TM_DSCR | 64 PPC | KVM_REG_PPC_TM_TAR | 64 + PPC | KVM_REG_PPC_TM_XER | 64 | | MIPS | KVM_REG_MIPS_R0 | 64 ... |