diff options
Diffstat (limited to 'Documentation')
9 files changed, 757 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt new file mode 100644 index 000000000000..5039c0a12f55 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt @@ -0,0 +1,7 @@ +SAMSUNG S5P/Exynos SoC series System Registers (SYSREG) + +Properties: + - name : should be 'sysreg'; + - compatible : should contain "samsung,<chip name>-sysreg", "syscon"; + For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon"; + - reg : offset and length of the register set. diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt new file mode 100644 index 000000000000..ea5e26f16aec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -0,0 +1,288 @@ +* Samsung Exynos4 Clock Controller + +The Exynos4 clock controller generates and supplies clock to various controllers +within the Exynos4 SoC. The clock binding described here is applicable to all +SoC's in the Exynos4 family. + +Required Properties: + +- comptible: should be one of the following. + - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC. + - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +The following is the list of clocks generated by the controller. Each clock is +assigned an identifier and client nodes use this identifier to specify the +clock which they consume. Some of the clocks are available only on a particular +Exynos4 SoC and this is specified where applicable. + + + [Core Clocks] + + Clock ID SoC (if specific) + ----------------------------------------------- + + xxti 1 + xusbxti 2 + fin_pll 3 + fout_apll 4 + fout_mpll 5 + fout_epll 6 + fout_vpll 7 + sclk_apll 8 + sclk_mpll 9 + sclk_epll 10 + sclk_vpll 11 + arm_clk 12 + aclk200 13 + aclk100 14 + aclk160 15 + aclk133 16 + mout_mpll_user_t 17 Exynos4x12 + mout_mpll_user_c 18 Exynos4x12 + mout_core 19 + mout_apll 20 + + + [Clock Gate for Special Clocks] + + Clock ID SoC (if specific) + ----------------------------------------------- + + sclk_fimc0 128 + sclk_fimc1 129 + sclk_fimc2 130 + sclk_fimc3 131 + sclk_cam0 132 + sclk_cam1 133 + sclk_csis0 134 + sclk_csis1 135 + sclk_hdmi 136 + sclk_mixer 137 + sclk_dac 138 + sclk_pixel 139 + sclk_fimd0 140 + sclk_mdnie0 141 Exynos4412 + sclk_mdnie_pwm0 12 142 Exynos4412 + sclk_mipi0 143 + sclk_audio0 144 + sclk_mmc0 145 + sclk_mmc1 146 + sclk_mmc2 147 + sclk_mmc3 148 + sclk_mmc4 149 + sclk_sata 150 Exynos4210 + sclk_uart0 151 + sclk_uart1 152 + sclk_uart2 153 + sclk_uart3 154 + sclk_uart4 155 + sclk_audio1 156 + sclk_audio2 157 + sclk_spdif 158 + sclk_spi0 159 + sclk_spi1 160 + sclk_spi2 161 + sclk_slimbus 162 + sclk_fimd1 163 Exynos4210 + sclk_mipi1 164 Exynos4210 + sclk_pcm1 165 + sclk_pcm2 166 + sclk_i2s1 167 + sclk_i2s2 168 + sclk_mipihsi 169 Exynos4412 + sclk_mfc 170 + sclk_pcm0 171 + sclk_g3d 172 + sclk_pwm_isp 173 Exynos4x12 + sclk_spi0_isp 174 Exynos4x12 + sclk_spi1_isp 175 Exynos4x12 + sclk_uart_isp 176 Exynos4x12 + + [Peripheral Clock Gates] + + Clock ID SoC (if specific) + ----------------------------------------------- + + fimc0 256 + fimc1 257 + fimc2 258 + fimc3 259 + csis0 260 + csis1 261 + jpeg 262 + smmu_fimc0 263 + smmu_fimc1 264 + smmu_fimc2 265 + smmu_fimc3 266 + smmu_jpeg 267 + vp 268 + mixer 269 + tvenc 270 Exynos4210 + hdmi 271 + smmu_tv 272 + mfc 273 + smmu_mfcl 274 + smmu_mfcr 275 + g3d 276 + g2d 277 Exynos4210 + rotator 278 Exynos4210 + mdma 279 Exynos4210 + smmu_g2d 280 Exynos4210 + smmu_rotator 281 Exynos4210 + smmu_mdma 282 Exynos4210 + fimd0 283 + mie0 284 + mdnie0 285 Exynos4412 + dsim0 286 + smmu_fimd0 287 + fimd1 288 Exynos4210 + mie1 289 Exynos4210 + dsim1 290 Exynos4210 + smmu_fimd1 291 Exynos4210 + pdma0 292 + pdma1 293 + pcie_phy 294 + sata_phy 295 Exynos4210 + tsi 296 + sdmmc0 297 + sdmmc1 298 + sdmmc2 299 + sdmmc3 300 + sdmmc4 301 + sata 302 Exynos4210 + sromc 303 + usb_host 304 + usb_device 305 + pcie 306 + onenand 307 + nfcon 308 + smmu_pcie 309 + gps 310 + smmu_gps 311 + uart0 312 + uart1 313 + uart2 314 + uart3 315 + uart4 316 + i2c0 317 + i2c1 318 + i2c2 319 + i2c3 320 + i2c4 321 + i2c5 322 + i2c6 323 + i2c7 324 + i2c_hdmi 325 + tsadc 326 + spi0 327 + spi1 328 + spi2 329 + i2s1 330 + i2s2 331 + pcm0 332 + i2s0 333 + pcm1 334 + pcm2 335 + pwm 336 + slimbus 337 + spdif 338 + ac97 339 + modemif 340 + chipid 341 + sysreg 342 + hdmi_cec 343 + mct 344 + wdt 345 + rtc 346 + keyif 347 + audss 348 + mipi_hsi 349 Exynos4210 + mdma2 350 Exynos4210 + pixelasyncm0 351 + pixelasyncm1 352 + fimc_lite0 353 Exynos4x12 + fimc_lite1 354 Exynos4x12 + ppmuispx 355 Exynos4x12 + ppmuispmx 356 Exynos4x12 + fimc_isp 357 Exynos4x12 + fimc_drc 358 Exynos4x12 + fimc_fd 359 Exynos4x12 + mcuisp 360 Exynos4x12 + gicisp 361 Exynos4x12 + smmu_isp 362 Exynos4x12 + smmu_drc 363 Exynos4x12 + smmu_fd 364 Exynos4x12 + smmu_lite0 365 Exynos4x12 + smmu_lite1 366 Exynos4x12 + mcuctl_isp 367 Exynos4x12 + mpwm_isp 368 Exynos4x12 + i2c0_isp 369 Exynos4x12 + i2c1_isp 370 Exynos4x12 + mtcadc_isp 371 Exynos4x12 + pwm_isp 372 Exynos4x12 + wdt_isp 373 Exynos4x12 + uart_isp 374 Exynos4x12 + asyncaxim 375 Exynos4x12 + smmu_ispcx 376 Exynos4x12 + spi0_isp 377 Exynos4x12 + spi1_isp 378 Exynos4x12 + pwm_isp_sclk 379 Exynos4x12 + spi0_isp_sclk 380 Exynos4x12 + spi1_isp_sclk 381 Exynos4x12 + uart_isp_sclk 382 Exynos4x12 + + [Mux Clocks] + + Clock ID SoC (if specific) + ----------------------------------------------- + + mout_fimc0 384 + mout_fimc1 385 + mout_fimc2 386 + mout_fimc3 387 + mout_cam0 388 + mout_cam1 389 + mout_csis0 390 + mout_csis1 391 + mout_g3d0 392 + mout_g3d1 393 + mout_g3d 394 + aclk400_mcuisp 395 Exynos4x12 + + [Div Clocks] + + Clock ID SoC (if specific) + ----------------------------------------------- + + div_isp0 450 Exynos4x12 + div_isp1 451 Exynos4x12 + div_mcuisp0 452 Exynos4x12 + div_mcuisp1 453 Exynos4x12 + div_aclk200 454 Exynos4x12 + div_aclk400_mcuisp 455 Exynos4x12 + + +Example 1: An example of a clock controller node is listed below. + + clock: clock-controller@0x10030000 { + compatible = "samsung,exynos4210-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + +Example 2: UART controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + clocks = <&clock 314>, <&clock 153>; + clock-names = "uart", "clk_uart_baud0"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt new file mode 100644 index 000000000000..781a6276adf7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -0,0 +1,177 @@ +* Samsung Exynos5250 Clock Controller + +The Exynos5250 clock controller generates and supplies clock to various +controllers within the Exynos5250 SoC. + +Required Properties: + +- comptible: should be one of the following. + - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +The following is the list of clocks generated by the controller. Each clock is +assigned an identifier and client nodes use this identifier to specify the +clock which they consume. + + + [Core Clocks] + + Clock ID + ---------------------------- + + fin_pll 1 + + [Clock Gate for Special Clocks] + + Clock ID + ---------------------------- + + sclk_cam_bayer 128 + sclk_cam0 129 + sclk_cam1 130 + sclk_gscl_wa 131 + sclk_gscl_wb 132 + sclk_fimd1 133 + sclk_mipi1 134 + sclk_dp 135 + sclk_hdmi 136 + sclk_pixel 137 + sclk_audio0 138 + sclk_mmc0 139 + sclk_mmc1 140 + sclk_mmc2 141 + sclk_mmc3 142 + sclk_sata 143 + sclk_usb3 144 + sclk_jpeg 145 + sclk_uart0 146 + sclk_uart1 147 + sclk_uart2 148 + sclk_uart3 149 + sclk_pwm 150 + sclk_audio1 151 + sclk_audio2 152 + sclk_spdif 153 + sclk_spi0 154 + sclk_spi1 155 + sclk_spi2 156 + + + [Peripheral Clock Gates] + + Clock ID + ---------------------------- + + gscl0 256 + gscl1 257 + gscl2 258 + gscl3 259 + gscl_wa 260 + gscl_wb 261 + smmu_gscl0 262 + smmu_gscl1 263 + smmu_gscl2 264 + smmu_gscl3 265 + mfc 266 + smmu_mfcl 267 + smmu_mfcr 268 + rotator 269 + jpeg 270 + mdma1 271 + smmu_rotator 272 + smmu_jpeg 273 + smmu_mdma1 274 + pdma0 275 + pdma1 276 + sata 277 + usbotg 278 + mipi_hsi 279 + sdmmc0 280 + sdmmc1 281 + sdmmc2 282 + sdmmc3 283 + sromc 284 + usb2 285 + usb3 286 + sata_phyctrl 287 + sata_phyi2c 288 + uart0 289 + uart1 290 + uart2 291 + uart3 292 + uart4 293 + i2c0 294 + i2c1 295 + i2c2 296 + i2c3 297 + i2c4 298 + i2c5 299 + i2c6 300 + i2c7 301 + i2c_hdmi 302 + adc 303 + spi0 304 + spi1 305 + spi2 306 + i2s1 307 + i2s2 308 + pcm1 309 + pcm2 310 + pwm 311 + spdif 312 + ac97 313 + hsi2c0 314 + hsi2c1 315 + hs12c2 316 + hs12c3 317 + chipid 318 + sysreg 319 + pmu 320 + cmu_top 321 + cmu_core 322 + cmu_mem 323 + tzpc0 324 + tzpc1 325 + tzpc2 326 + tzpc3 327 + tzpc4 328 + tzpc5 329 + tzpc6 330 + tzpc7 331 + tzpc8 332 + tzpc9 333 + hdmi_cec 334 + mct 335 + wdt 336 + rtc 337 + tmu 338 + fimd1 339 + mie1 340 + dsim0 341 + dp 342 + mixer 343 + hdmi 345 + +Example 1: An example of a clock controller node is listed below. + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5250-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + +Example 2: UART controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + clocks = <&clock 314>, <&clock 153>; + clock-names = "uart", "clk_uart_baud0"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt new file mode 100644 index 000000000000..4499e9966bc9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -0,0 +1,61 @@ +* Samsung Exynos5440 Clock Controller + +The Exynos5440 clock controller generates and supplies clock to various +controllers within the Exynos5440 SoC. + +Required Properties: + +- comptible: should be "samsung,exynos5440-clock". + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +The following is the list of clocks generated by the controller. Each clock is +assigned an identifier and client nodes use this identifier to specify the +clock which they consume. + + + [Core Clocks] + + Clock ID + ---------------------------- + + xtal 1 + arm_clk 2 + + [Peripheral Clock Gates] + + Clock ID + ---------------------------- + + spi_baud 16 + pb0_250 17 + pr0_250 18 + pr1_250 19 + b_250 20 + b_125 21 + b_200 22 + sata 23 + usb 24 + gmac0 25 + cs250 26 + pb0_250_o 27 + pr0_250_o 28 + pr1_250_o 29 + b_250_o 30 + b_125_o 31 + b_200_o 32 + sata_o 33 + usb_o 34 + gmac0_o 35 + cs250_o 36 + +Example: An example of a clock controller node is listed below. + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5440-clock"; + reg = <0x160000 0x10000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt new file mode 100644 index 000000000000..2b14a940eb75 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt @@ -0,0 +1,20 @@ +* Samsung 2D Graphics Accelerator + +Required properties: + - compatible : value should be one among the following: + (a) "samsung,s5pv210-g2d" for G2D IP present in S5PV210 & Exynos4210 SoC + (b) "samsung,exynos4212-g2d" for G2D IP present in Exynos4x12 SoCs + (c) "samsung,exynos5250-g2d" for G2D IP present in Exynos5250 SoC + + - reg : Physical base address of the IP registers and length of memory + mapped region. + + - interrupts : G2D interrupt number to the CPU. + +Example: + g2d@12800000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0x12800000 0x1000>; + interrupts = <0 89 0>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index 67ec3d4ccc7f..bf0182d8da25 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -21,3 +21,24 @@ Required properties: - samsung,mfc-l : Base address of the second memory bank used by MFC for DMA contiguous memory allocation and its size. + +Optional properties: + - samsung,power-domain : power-domain property defined with a phandle + to respective power domain. + +Example: +SoC specific DT entry: + +mfc: codec@13400000 { + compatible = "samsung,mfc-v5"; + reg = <0x13400000 0x10000>; + interrupts = <0 94 0>; + samsung,power-domain = <&pd_mfc>; +}; + +Board specific DT entry: + +codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt new file mode 100644 index 000000000000..cb47bfbcaeea --- /dev/null +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -0,0 +1,68 @@ +Samsung's Multi Core Timer (MCT) + +The Samsung's Multi Core Timer (MCT) module includes two main blocks, the +global timer and CPU local timers. The global timer is a 64-bit free running +up-counter and can generate 4 interrupts when the counter reaches one of the +four preset counter values. The CPU local timers are 32-bit free running +down-counters and generate an interrupt when the counter expires. There is +one CPU local timer instantiated in MCT for every CPU in the system. + +Required properties: + +- compatible: should be "samsung,exynos4210-mct". + (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct. + (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct. + +- reg: base address of the mct controller and length of the address space + it occupies. + +- interrupts: the list of interrupts generated by the controller. The following + should be the order of the interrupts specified. The local timer interrupts + should be specified after the four global timer interrupts have been + specified. + + 0: Global Timer Interrupt 0 + 1: Global Timer Interrupt 1 + 2: Global Timer Interrupt 2 + 3: Global Timer Interrupt 3 + 4: Local Timer Interrupt 0 + 5: Local Timer Interrupt 1 + 6: .. + 7: .. + i: Local Timer Interrupt n + +Example 1: In this example, the system uses only the first global timer + interrupt generated by MCT and the remaining three global timer + interrupts are unused. Two local timer interrupts have been + specified. + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>, + <0 42 0>, <0 48 0>; + }; + +Example 2: In this example, the MCT global and local timer interrupts are + connected to two seperate interrupt controllers. Hence, an + interrupt-map is created to map the interrupts to the respective + interrupt controllers. + + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &combiner 23 3>, + <0x4 0 &gic 0 120 0>, + <0x5 0 &gic 0 121 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt new file mode 100644 index 000000000000..b3abde736017 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -0,0 +1,50 @@ +Samsung Exynos SoC USB controller + +The USB devices interface with USB controllers on Exynos SOCs. +The device node has following properties. + +EHCI +Required properties: + - compatible: should be "samsung,exynos4210-ehci" for USB 2.0 + EHCI controller in host mode. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + - clocks: from common clock binding: handle to usb clock. + - clock-names: from common clock binding: Shall be "usbhost". + +Optional properties: + - samsung,vbus-gpio: if present, specifies the GPIO that + needs to be pulled up for the bus to be powered. + +Example: + + usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + samsung,vbus-gpio = <&gpx2 6 1 3 3>; + + clocks = <&clock 285>; + clock-names = "usbhost"; + }; + +OHCI +Required properties: + - compatible: should be "samsung,exynos4210-ohci" for USB 2.0 + OHCI companion controller in host mode. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + - clocks: from common clock binding: handle to usb clock. + - clock-names: from common clock binding: Shall be "usbhost". + +Example: + usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock 285>; + clock-names = "usbhost"; + }; diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt new file mode 100644 index 000000000000..778838a0336a --- /dev/null +++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt @@ -0,0 +1,65 @@ +Device-Tree bindings for Samsung SoC display controller (FIMD) + +FIMD (Fully Interactive Mobile Display) is the Display Controller for the +Samsung series of SoCs which transfers the image data from a video memory +buffer to an external LCD interface. + +Required properties: +- compatible: value should be one of the following + "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ + "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ + "samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */ + "samsung,s5pc100-fimd"; /* for S5PC100 SoC */ + "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ + "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ + "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */ + +- reg: physical base address and length of the FIMD registers set. + +- interrupt-parent: should be the phandle of the fimd controller's + parent interrupt controller. + +- interrupts: should contain a list of all FIMD IP block interrupts in the + order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier + format depends on the interrupt controller used. + +- interrupt-names: should contain the interrupt names: "fifo", "vsync", + "lcd_sys", in the same order as they were listed in the interrupts + property. + +- pinctrl-0: pin control group to be used for this controller. + +- pinctrl-names: must contain a "default" entry. + +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. + +- clock-names: list of clock names sorted in the same order as the clocks + property. Must contain "sclk_fimd" and "fimd". + +Optional Properties: +- samsung,power-domain: a phandle to FIMD power domain node. + +Example: + +SoC specific DT entry: + + fimd@11c00000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&combiner>; + reg = <0x11c00000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <11 0>, <11 1>, <11 2>; + clocks = <&clock 140>, <&clock 283>; + clock-names = "sclk_fimd", "fimd"; + samsung,power-domain = <&pd_lcd0>; + status = "disabled"; + }; + +Board specific DT entry: + + fimd@11c00000 { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + }; |