diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 328 |
1 files changed, 191 insertions, 137 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 6e03229622db..9064ed492fb5 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -376,12 +376,72 @@ choice Say Y here if you want kernel low-level debugging support on TI-NSPIRE CX models. - config DEBUG_OMAP2PLUS_UART - bool "Kernel low-level debugging messages via OMAP2PLUS UART" + config DEBUG_OMAP2UART1 + bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART help - Say Y here if you want kernel low-level debugging support - on OMAP2PLUS based platforms. + This covers at least h4, 2430sdp, 3430sdp, 3630sdp, + omap3 torpedo and 3530 lv som. + + config DEBUG_OMAP2UART2 + bool "Kernel low-level debugging messages via OMAP2/3/4 UART2" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP2UART3 + bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP3UART3 + bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + help + This covers at least cm_t3x, beagle, crane, devkit8000, + igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, + and 3517evm. + + config DEBUG_OMAP4UART3 + bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP3UART4 + bool "Kernel low-level debugging messages via OMAP36XX UART4" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP4UART4 + bool "Kernel low-level debugging messages via OMAP4/5 UART4" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_TI81XXUART1 + bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_TI81XXUART2 + bool "Kernel low-level debugging messages via TI81XX UART2" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_TI81XXUART3 + bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_AM33XXUART1 + bool "Kernel low-level debugging messages via AM33XX UART1" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_ZOOM_UART + bool "Kernel low-level debugging messages via Zoom2/3 UART" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART config DEBUG_PICOXCELL_UART depends on ARCH_PICOXCELL @@ -413,9 +473,58 @@ choice their output to the standard serial port on the RealView PB1176 platform. - config DEBUG_ROCKCHIP_UART - bool "Kernel low-level debugging messages via Rockchip UART" + config DEBUG_RK29_UART0 + bool "Kernel low-level debugging messages via Rockchip RK29 UART0" + depends on ARCH_ROCKCHIP + select DEBUG_ROCKCHIP_UART + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK29_UART1 + bool "Kernel low-level debugging messages via Rockchip RK29 UART1" + depends on ARCH_ROCKCHIP + select DEBUG_ROCKCHIP_UART + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK29_UART2 + bool "Kernel low-level debugging messages via Rockchip RK29 UART2" + depends on ARCH_ROCKCHIP + select DEBUG_ROCKCHIP_UART + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK3X_UART0 + bool "Kernel low-level debugging messages via Rockchip RK3X UART0" + depends on ARCH_ROCKCHIP + select DEBUG_ROCKCHIP_UART + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK3X_UART1 + bool "Kernel low-level debugging messages via Rockchip RK3X UART1" depends on ARCH_ROCKCHIP + select DEBUG_ROCKCHIP_UART + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK3X_UART2 + bool "Kernel low-level debugging messages via Rockchip RK3X UART2" + depends on ARCH_ROCKCHIP + select DEBUG_ROCKCHIP_UART + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK3X_UART3 + bool "Kernel low-level debugging messages via Rockchip RK3X UART3" + depends on ARCH_ROCKCHIP + select DEBUG_ROCKCHIP_UART help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. @@ -489,9 +598,54 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A1X based platforms on the UART1. - config DEBUG_TEGRA_UART + config TEGRA_DEBUG_UART_AUTO_ODMDATA + bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA - bool "Use Tegra UART for low-level debug" + select DEBUG_TEGRA_UART + help + Automatically determines which UART to use for low-level + debug based on the ODMDATA value. This value is part of + the BCT, and is written to the boot memory device using + nvflash, or other flashing tool. When bits 19:18 are 3, + then bits 17:15 indicate which UART to use; 0/1/2/3/4 + are UART A/B/C/D/E. + + config TEGRA_DEBUG_UARTA + bool "Kernel low-level debugging messages via Tegra UART A" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTB + bool "Kernel low-level debugging messages via Tegra UART B" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTC + bool "Kernel low-level debugging messages via Tegra UART C" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTD + bool "Kernel low-level debugging messages via Tegra UART D" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTE + bool "Kernel low-level debugging messages via Tegra UART E" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART help Say Y here if you want kernel low-level debugging support on Tegra based platforms. @@ -510,13 +664,25 @@ choice Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFmarco devices. - config DEBUG_STI_UART + config STIH41X_DEBUG_ASC2 + bool "Use StiH415/416 ASC2 UART for low-level debug" + depends on ARCH_STI + select DEBUG_STI_UART + help + Say Y here if you want kernel low-level debugging support + on STiH415/416 based platforms like b2000, which has + default UART wired up to ASC2. + + If unsure, say N. + + config STIH41X_DEBUG_SBC_ASC1 + bool "Use StiH415/416 SBC ASC1 UART for low-level debug" depends on ARCH_STI - bool "Use StiH415/416 ASC for low-level debug" + select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support - on StiH415/416 based platforms like B2000, B2020. - It support UART2 and SBC_UART1. + on STiH415/416 based platforms like b2020. which has + default UART wired up to SBC ASC1. If unsure, say N. @@ -615,6 +781,10 @@ endchoice config DEBUG_EXYNOS_UART bool +config DEBUG_OMAP2PLUS_UART + bool + depends on ARCH_OMAP2PLUS + config DEBUG_IMX_UART_PORT int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -631,133 +801,17 @@ config DEBUG_IMX_UART_PORT Choose UART port on which kernel low-level debug messages should be output. -choice - prompt "Low-level debug console UART" - depends on DEBUG_OMAP2PLUS_UART - - config DEBUG_OMAP2UART1 - bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" - help - This covers at least h4, 2430sdp, 3430sdp, 3630sdp, - omap3 torpedo and 3530 lv som. - - config DEBUG_OMAP2UART2 - bool "OMAP2/3/4 UART2" - - config DEBUG_OMAP2UART3 - bool "OMAP2 UART3 (n8x0)" - - config DEBUG_OMAP3UART3 - bool "OMAP3 UART3 (most omap3 boards)" - help - This covers at least cm_t3x, beagle, crane, devkit8000, - igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, - and 3517evm. - - config DEBUG_OMAP4UART3 - bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" - - config DEBUG_OMAP3UART4 - bool "OMAP36XX UART4" - - config DEBUG_OMAP4UART4 - bool "OMAP4/5 UART4" - - config DEBUG_TI81XXUART1 - bool "TI81XX UART1 (ti8148evm)" - - config DEBUG_TI81XXUART2 - bool "TI81XX UART2" - - config DEBUG_TI81XXUART3 - bool "TI81XX UART3 (ti8168evm)" - - config DEBUG_AM33XXUART1 - bool "AM33XX UART1" - - config DEBUG_ZOOM_UART - bool "Zoom2/3 UART" -endchoice - -choice - prompt "Low-level debug console UART" - depends on DEBUG_ROCKCHIP_UART - - config DEBUG_RK29_UART0 - bool "RK29 UART0" - - config DEBUG_RK29_UART1 - bool "RK29 UART1" - - config DEBUG_RK29_UART2 - bool "RK29 UART2" - - config DEBUG_RK3X_UART0 - bool "RK3X UART0" - - config DEBUG_RK3X_UART1 - bool "RK3X UART1" - - config DEBUG_RK3X_UART2 - bool "RK3X UART2" - - config DEBUG_RK3X_UART3 - bool "RK3X UART3" -endchoice - -choice - prompt "Low-level debug console UART" - depends on DEBUG_LL && DEBUG_TEGRA_UART - - config TEGRA_DEBUG_UART_AUTO_ODMDATA - bool "Via ODMDATA" - help - Automatically determines which UART to use for low-level debug based - on the ODMDATA value. This value is part of the BCT, and is written - to the boot memory device using nvflash, or other flashing tool. - When bits 19:18 are 3, then bits 17:15 indicate which UART to use; - 0/1/2/3/4 are UART A/B/C/D/E. - - config TEGRA_DEBUG_UARTA - bool "UART A" - - config TEGRA_DEBUG_UARTB - bool "UART B" - - config TEGRA_DEBUG_UARTC - bool "UART C" - - config TEGRA_DEBUG_UARTD - bool "UART D" - - config TEGRA_DEBUG_UARTE - bool "UART E" - -endchoice - -choice - prompt "Low-level debug console UART" - depends on DEBUG_LL && DEBUG_STI_UART - - config STIH41X_DEBUG_ASC2 - bool "ASC2 UART" - help - Say Y here if you want kernel low-level debugging support - on STiH415/416 based platforms like b2000, which has - default UART wired up to ASC2. - - If unsure, say N. - - config STIH41X_DEBUG_SBC_ASC1 - bool "SBC ASC1 UART" - help - Say Y here if you want kernel low-level debugging support - on STiH415/416 based platforms like b2020. which has - default UART wired up to SBC ASC1. +config DEBUG_ROCKCHIP_UART + bool + depends on ARCH_ROCKCHIP - If unsure, say N. +config DEBUG_TEGRA_UART + bool + depends on ARCH_TEGRA -endchoice +config DEBUG_STI_UART + bool + depends on ARCH_STI config DEBUG_LL_INCLUDE string |